Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2021-09-01 09:51:16 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2021-09-01 09:51:16 -0700
commit: 7c314bdfb64e4bb8d2f829376ed56ce663483752 (patch)
tree: ce846e0c4e8c8138258dd00c1f15aad7368fafbb /drivers
parent: ebf435d3b51b22340ef047aad0c2936ec4833ab2 (diff)
parent: 2e5f3a69b6fcd52a64ce3d746c6ee8390b6cabe8 (diff)
download: linux-7c314bdfb64e4bb8d2f829376ed56ce663483752.tar.gz
65 files changed, 901 insertions, 644 deletions
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 5ac53dcb3a6a..78baba55a8b5 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2841,7 +2841,7 @@ static int __init synclink_cs_init(void)
 err_unreg_tty:
 	tty_unregister_driver(serial_driver);
 err_put_tty:
-	put_tty_driver(serial_driver);
+	tty_driver_kref_put(serial_driver);
 err:
 	return rc;
 }
@@ -2850,7 +2850,7 @@ static void __exit synclink_cs_exit(void)
 {
 	pcmcia_unregister_driver(&mgslpc_driver);
 	tty_unregister_driver(serial_driver);
-	put_tty_driver(serial_driver);
+	tty_driver_kref_put(serial_driver);
 }
 
 module_init(synclink_cs_init);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 230b2c9b3e3c..adf941c47506 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -198,7 +198,7 @@ static int __init ttyprintk_init(void)
 	return 0;
 
 error:
-	put_tty_driver(ttyprintk_driver);
+	tty_driver_kref_put(ttyprintk_driver);
 	tty_port_destroy(&tpk_port.port);
 	return ret;
 }
@@ -206,7 +206,7 @@ error:
 static void __exit ttyprintk_exit(void)
 {
 	tty_unregister_driver(ttyprintk_driver);
-	put_tty_driver(ttyprintk_driver);
+	tty_driver_kref_put(ttyprintk_driver);
 	tty_port_destroy(&tpk_port.port);
 }
 
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index 20fa02c81070..c14e65a5d38f 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -347,10 +347,10 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 	/* Register the TTY device */
 
 	/* Each IP-OCTAL channel is a TTY port */
-	tty = alloc_tty_driver(NR_CHANNELS);
-
-	if (!tty)
-		return -ENOMEM;
+	tty = tty_alloc_driver(NR_CHANNELS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(tty))
+		return PTR_ERR(tty);
 
 	/* Fill struct tty_driver with ipoctal data */
 	tty->owner = THIS_MODULE;
@@ -362,7 +362,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 	tty->minor_start = 0;
 	tty->type = TTY_DRIVER_TYPE_SERIAL;
 	tty->subtype = SERIAL_TYPE_NORMAL;
-	tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	tty->init_termios = tty_std_termios;
 	tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	tty->init_termios.c_ispeed = 9600;
@@ -372,7 +371,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
 	res = tty_register_driver(tty);
 	if (res) {
 		dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n");
-		put_tty_driver(tty);
+		tty_driver_kref_put(tty);
 		return res;
 	}
 
@@ -697,7 +696,7 @@ static void __ipoctal_remove(struct ipoctal *ipoctal)
 	}
 
 	tty_unregister_driver(ipoctal->tty_drv);
-	put_tty_driver(ipoctal->tty_drv);
+	tty_driver_kref_put(ipoctal->tty_drv);
 	kfree(ipoctal);
 }
 
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index d5f9261fa879..0f00be62438d 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1269,10 +1269,11 @@ static int __init capinc_tty_init(void)
 	if (!capiminors)
 		return -ENOMEM;
 
-	drv = alloc_tty_driver(capi_ttyminors);
-	if (!drv) {
+	drv = tty_alloc_driver(capi_ttyminors, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(drv)) {
 		kfree(capiminors);
-		return -ENOMEM;
+		return PTR_ERR(drv);
 	}
 	drv->driver_name = "capi_nc";
 	drv->name = "capi!";
@@ -1285,14 +1286,11 @@ static int __init capinc_tty_init(void)
 	drv->init_termios.c_oflag = OPOST | ONLCR;
 	drv->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	drv->init_termios.c_lflag = 0;
-	drv->flags =
-		TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS |
-		TTY_DRIVER_DYNAMIC_DEV;
 	tty_set_operations(drv, &capinc_ops);
 
 	err = tty_register_driver(drv);
 	if (err) {
-		put_tty_driver(drv);
+		tty_driver_kref_put(drv);
 		kfree(capiminors);
 		printk(KERN_ERR "Couldn't register capi_nc driver\n");
 		return err;
@@ -1304,7 +1302,7 @@ static int __init capinc_tty_init(void)
 static void __exit capinc_tty_exit(void)
 {
 	tty_unregister_driver(capinc_tty_driver);
-	put_tty_driver(capinc_tty_driver);
+	tty_driver_kref_put(capinc_tty_driver);
 	kfree(capiminors);
 }
 
diff --git a/drivers/misc/bcm-vk/bcm_vk_tty.c b/drivers/misc/bcm-vk/bcm_vk_tty.c
index dae9eeed84a2..1b6076a89ca6 100644
--- a/drivers/misc/bcm-vk/bcm_vk_tty.c
+++ b/drivers/misc/bcm-vk/bcm_vk_tty.c
@@ -249,7 +249,7 @@ int bcm_vk_tty_init(struct bcm_vk *vk, char *name)
 	tty_drv->name = kstrdup(name, GFP_KERNEL);
 	if (!tty_drv->name) {
 		err = -ENOMEM;
-		goto err_put_tty_driver;
+		goto err_tty_driver_kref_put;
 	}
 	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
 	tty_drv->subtype = SERIAL_TYPE_NORMAL;
@@ -295,8 +295,8 @@ err_kfree_tty_name:
 	kfree(tty_drv->name);
 	tty_drv->name = NULL;
 
-err_put_tty_driver:
-	put_tty_driver(tty_drv);
+err_tty_driver_kref_put:
+	tty_driver_kref_put(tty_drv);
 
 	return err;
 }
@@ -317,7 +317,7 @@ void bcm_vk_tty_exit(struct bcm_vk *vk)
 	kfree(vk->tty_drv->name);
 	vk->tty_drv->name = NULL;
 
-	put_tty_driver(vk->tty_drv);
+	tty_driver_kref_put(vk->tty_drv);
 }
 
 void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk)
diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c
index c36242b86b1d..04c0823e0359 100644
--- a/drivers/mmc/core/sdio_uart.c
+++ b/drivers/mmc/core/sdio_uart.c
@@ -1135,9 +1135,10 @@ static int __init sdio_uart_init(void)
 	int ret;
 	struct tty_driver *tty_drv;
 
-	sdio_uart_tty_driver = tty_drv = alloc_tty_driver(UART_NR);
-	if (!tty_drv)
-		return -ENOMEM;
+	sdio_uart_tty_driver = tty_drv = tty_alloc_driver(UART_NR,
+			TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(tty_drv))
+		return PTR_ERR(tty_drv);
 
 	tty_drv->driver_name = "sdio_uart";
 	tty_drv->name =   "ttySDIO";
@@ -1145,7 +1146,6 @@ static int __init sdio_uart_init(void)
 	tty_drv->minor_start = 0;
 	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
 	tty_drv->subtype = SERIAL_TYPE_NORMAL;
-	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	tty_drv->init_termios = tty_std_termios;
 	tty_drv->init_termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
 	tty_drv->init_termios.c_ispeed = 4800;
@@ -1165,7 +1165,7 @@ static int __init sdio_uart_init(void)
 err2:
 	tty_unregister_driver(tty_drv);
 err1:
-	put_tty_driver(tty_drv);
+	tty_driver_kref_put(tty_drv);
 	return ret;
 }
 
@@ -1173,7 +1173,7 @@ static void __exit sdio_uart_exit(void)
 {
 	sdio_unregister_driver(&sdio_uart_driver);
 	tty_unregister_driver(sdio_uart_tty_driver);
-	put_tty_driver(sdio_uart_tty_driver);
+	tty_driver_kref_put(sdio_uart_tty_driver);
 }
 
 module_init(sdio_uart_init);
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 24bc1e678b7b..7dc1ef3f93c3 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -3241,9 +3241,10 @@ static int __init hso_init(void)
 		serial_table[i] = NULL;
 
 	/* allocate our driver using the proper amount of supported minors */
-	tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
-	if (!tty_drv)
-		return -ENOMEM;
+	tty_drv = tty_alloc_driver(HSO_SERIAL_TTY_MINORS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(tty_drv))
+		return PTR_ERR(tty_drv);
 
 	/* fill in all needed values */
 	tty_drv->driver_name = driver_name;
@@ -3256,7 +3257,6 @@ static int __init hso_init(void)
 	tty_drv->minor_start = 0;
 	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
 	tty_drv->subtype = SERIAL_TYPE_NORMAL;
-	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	tty_drv->init_termios = tty_std_termios;
 	hso_init_termios(&tty_drv->init_termios);
 	tty_set_operations(tty_drv, &hso_serial_ops);
@@ -3281,7 +3281,7 @@ static int __init hso_init(void)
 err_unreg_tty:
 	tty_unregister_driver(tty_drv);
 err_free_tty:
-	put_tty_driver(tty_drv);
+	tty_driver_kref_put(tty_drv);
 	return result;
 }
 
@@ -3292,7 +3292,7 @@ static void __exit hso_exit(void)
 	tty_unregister_driver(tty_drv);
 	/* deregister the usb driver */
 	usb_deregister(&hso_driver);
-	put_tty_driver(tty_drv);
+	tty_driver_kref_put(tty_drv);
 }
 
 /* Module definitions */
diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c
index 279d9df19c01..c61bbeeec2df 100644
--- a/drivers/platform/surface/aggregator/core.c
+++ b/drivers/platform/surface/aggregator/core.c
@@ -301,20 +301,13 @@ static acpi_status ssam_serdev_setup_via_acpi_crs(struct acpi_resource *rsc,
 						  void *ctx)
 {
 	struct serdev_device *serdev = ctx;
-	struct acpi_resource_common_serialbus *serial;
 	struct acpi_resource_uart_serialbus *uart;
 	bool flow_control;
 	int status = 0;
 
-	if (rsc->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+	if (!serdev_acpi_get_uart_resource(rsc, &uart))
 		return AE_OK;
 
-	serial = &rsc->data.common_serial_bus;
-	if (serial->type != ACPI_RESOURCE_SERIAL_TYPE_UART)
-		return AE_OK;
-
-	uart = &rsc->data.uart_serial_bus;
-
 	/* Set up serdev device. */
 	serdev_device_set_baudrate(serdev, uart->default_baud_rate);
 
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 67c0009ca545..f356607835d8 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -1076,13 +1076,13 @@ static int __init tty3215_init(void)
 	if (!CONSOLE_IS_3215)
 		return 0;
 
-	driver = alloc_tty_driver(NR_3215);
-	if (!driver)
-		return -ENOMEM;
+	driver = tty_alloc_driver(NR_3215, TTY_DRIVER_REAL_RAW);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
 
 	ret = ccw_driver_register(&raw3215_ccw_driver);
 	if (ret) {
-		put_tty_driver(driver);
+		tty_driver_kref_put(driver);
 		return ret;
 	}
 	/*
@@ -1101,11 +1101,10 @@ static int __init tty3215_init(void)
 	driver->init_termios.c_iflag = IGNBRK | IGNPAR;
 	driver->init_termios.c_oflag = ONLCR;
 	driver->init_termios.c_lflag = ISIG;
-	driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(driver, &tty3215_ops);
 	ret = tty_register_driver(driver);
 	if (ret) {
-		put_tty_driver(driver);
+		tty_driver_kref_put(driver);
 		return ret;
 	}
 	tty3215_driver = driver;
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 6be9de8ed37d..971fbb52740b 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -503,20 +503,20 @@ sclp_tty_init(void)
 		return 0;
 	if (!sclp.has_linemode)
 		return 0;
-	driver = alloc_tty_driver(1);
-	if (!driver)
-		return -ENOMEM;
+	driver = tty_alloc_driver(1, TTY_DRIVER_REAL_RAW);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
 
 	rc = sclp_rw_init();
 	if (rc) {
-		put_tty_driver(driver);
+		tty_driver_kref_put(driver);
 		return rc;
 	}
 	/* Allocate pages for output buffering */
 	for (i = 0; i < MAX_KMEM_PAGES; i++) {
 		page = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 		if (page == NULL) {
-			put_tty_driver(driver);
+			tty_driver_kref_put(driver);
 			return -ENOMEM;
 		}
 		list_add_tail((struct list_head *) page, &sclp_tty_pages);
@@ -532,7 +532,7 @@ sclp_tty_init(void)
 
 	rc = sclp_register(&sclp_input_event);
 	if (rc) {
-		put_tty_driver(driver);
+		tty_driver_kref_put(driver);
 		return rc;
 	}
 
@@ -548,12 +548,11 @@ sclp_tty_init(void)
 	driver->init_termios.c_iflag = IGNBRK | IGNPAR;
 	driver->init_termios.c_oflag = ONLCR;
 	driver->init_termios.c_lflag = ISIG | ECHO;
-	driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(driver, &sclp_ops);
 	tty_port_link_device(&sclp_port, driver, 0);
 	rc = tty_register_driver(driver);
 	if (rc) {
-		put_tty_driver(driver);
+		tty_driver_kref_put(driver);
 		tty_port_destroy(&sclp_port);
 		return rc;
 	}
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index da2496306c04..29a6a0099f83 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -732,9 +732,9 @@ static int __init sclp_vt220_tty_init(void)
 
 	/* Note: we're not testing for CONSOLE_IS_SCLP here to preserve
 	 * symmetry between VM and LPAR systems regarding ttyS1. */
-	driver = alloc_tty_driver(1);
-	if (!driver)
-		return -ENOMEM;
+	driver = tty_alloc_driver(1, TTY_DRIVER_REAL_RAW);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
 	rc = __sclp_vt220_init(MAX_KMEM_PAGES);
 	if (rc)
 		goto out_driver;
@@ -746,7 +746,6 @@ static int __init sclp_vt220_tty_init(void)
 	driver->type = TTY_DRIVER_TYPE_SYSTEM;
 	driver->subtype = SYSTEM_TYPE_TTY;
 	driver->init_termios = tty_std_termios;
-	driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(driver, &sclp_vt220_ops);
 	tty_port_link_device(&sclp_vt220_port, driver, 0);
 
@@ -764,7 +763,7 @@ out_reg:
 out_init:
 	__sclp_vt220_cleanup();
 out_driver:
-	put_tty_driver(driver);
+	tty_driver_kref_put(driver);
 	return rc;
 }
 __initcall(sclp_vt220_tty_init);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index adc33846bf8e..5c83f71c1d0e 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -1935,7 +1935,7 @@ static int __init tty3270_init(void)
 	tty_set_operations(driver, &tty3270_ops);
 	ret = tty_register_driver(driver);
 	if (ret) {
-		put_tty_driver(driver);
+		tty_driver_kref_put(driver);
 		return ret;
 	}
 	tty3270_driver = driver;
@@ -1952,7 +1952,7 @@ tty3270_exit(void)
 	driver = tty3270_driver;
 	tty3270_driver = NULL;
 	tty_unregister_driver(driver);
-	put_tty_driver(driver);
+	tty_driver_kref_put(driver);
 	tty3270_del_views();
 }
 
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index 38a280e876c2..e8fa7f53cd5e 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -2852,11 +2852,11 @@ unregister_loop:
 		tty_unregister_driver(fwloop_driver);
 put_loop:
 	if (create_loop_dev)
-		put_tty_driver(fwloop_driver);
+		tty_driver_kref_put(fwloop_driver);
 unregister_driver:
 	tty_unregister_driver(fwtty_driver);
 put_tty:
-	put_tty_driver(fwtty_driver);
+	tty_driver_kref_put(fwtty_driver);
 remove_debugfs:
 	debugfs_remove_recursive(fwserial_debugfs);
 
@@ -2871,10 +2871,10 @@ static void __exit fwserial_exit(void)
 	kmem_cache_destroy(fwtty_txn_cache);
 	if (create_loop_dev) {
 		tty_unregister_driver(fwloop_driver);
-		put_tty_driver(fwloop_driver);
+		tty_driver_kref_put(fwloop_driver);
 	}
 	tty_unregister_driver(fwtty_driver);
-	put_tty_driver(fwtty_driver);
+	tty_driver_kref_put(fwtty_driver);
 	debugfs_remove_recursive(fwserial_debugfs);
 }
 
diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c
index 279de2cd9c4a..04df6f9f5403 100644
--- a/drivers/staging/gdm724x/gdm_tty.c
+++ b/drivers/staging/gdm724x/gdm_tty.c
@@ -281,9 +281,10 @@ int register_lte_tty_driver(void)
 	int ret;
 
 	for (i = 0; i < TTY_MAX_COUNT; i++) {
-		tty_driver = alloc_tty_driver(GDM_TTY_MINOR);
-		if (!tty_driver)
-			return -ENOMEM;
+		tty_driver = tty_alloc_driver(GDM_TTY_MINOR,
+				TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
+		if (IS_ERR(tty_driver))
+			return PTR_ERR(tty_driver);
 
 		tty_driver->owner = THIS_MODULE;
 		tty_driver->driver_name = DRIVER_STRING[i];
@@ -291,8 +292,6 @@ int register_lte_tty_driver(void)
 		tty_driver->major = GDM_TTY_MAJOR;
 		tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 		tty_driver->subtype = SERIAL_TYPE_NORMAL;
-		tty_driver->flags = TTY_DRIVER_REAL_RAW |
-					TTY_DRIVER_DYNAMIC_DEV;
 		tty_driver->init_termios = tty_std_termios;
 		tty_driver->init_termios.c_cflag = B9600 | CS8 | HUPCL | CLOCAL;
 		tty_driver->init_termios.c_lflag = ISIG | ICANON | IEXTEN;
@@ -300,7 +299,7 @@ int register_lte_tty_driver(void)
 
 		ret = tty_register_driver(tty_driver);
 		if (ret) {
-			put_tty_driver(tty_driver);
+			tty_driver_kref_put(tty_driver);
 			return ret;
 		}
 
@@ -319,7 +318,7 @@ void unregister_lte_tty_driver(void)
 		tty_driver = gdm_driver[i];
 		if (tty_driver) {
 			tty_unregister_driver(tty_driver);
-			put_tty_driver(tty_driver);
+			tty_driver_kref_put(tty_driver);
 		}
 	}
 }
diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index 73f01ed1e5b7..e6d860a9678e 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -973,7 +973,7 @@ static int gb_tty_init(void)
 	return 0;
 
 fail_put_gb_tty:
-	put_tty_driver(gb_tty_driver);
+	tty_driver_kref_put(gb_tty_driver);
 fail_unregister_dev:
 	return retval;
 }
@@ -981,7 +981,7 @@ fail_unregister_dev:
 static void gb_tty_exit(void)
 {
 	tty_unregister_driver(gb_tty_driver);
-	put_tty_driver(gb_tty_driver);
+	tty_driver_kref_put(gb_tty_driver);
 	idr_destroy(&tty_minors);
 }
 
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 5ec19c48fb7a..1e60dbef676c 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -22,8 +22,6 @@
  *
  */
 
-#include <linux/delay.h>
-
 /* Set of debugging defines */
 
 #undef SERIAL_DEBUG_INTR
@@ -31,55 +29,42 @@
 #undef SERIAL_DEBUG_FLOW
 #undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
 
-/* Sanity checks */
-
-#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
-#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
- tty->name, (info->tport.flags), serial_driver->refcount,info->count,tty->count,s)
-#else
-#define DBG_CNT(s)
-#endif
-
 /*
  * End of serial driver configuration section.
  */
 
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-static char *serial_version = "4.30";
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
+#include <linux/bitops.h>
 #include <linux/circ_buf.h>
 #include <linux/console.h>
-#include <linux/major.h>
-#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
 #include <linux/fcntl.h>
-#include <linux/ptrace.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
 #include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/ptrace.h>
 #include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
 #include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-
-
-#include <asm/irq.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/tty_flip.h>
+#include <linux/tty.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
 
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
 
 struct serial_state {
 	struct tty_port		tport;
@@ -88,7 +73,6 @@ struct serial_state {
 
 	unsigned long		port;
 	int			baud_base;
-	int			xmit_fifo_size;
 	int			custom_divisor;
 	int			read_status_mask;
 	int			ignore_status_mask;
@@ -99,14 +83,13 @@ struct serial_state {
 	int			x_char;	/* xon/xoff character */
 };
 
-#define custom amiga_custom
-static char *serial_name = "Amiga-builtin serial driver";
-
 static struct tty_driver *serial_driver;
 
 /* number of characters left in xmit buffer before we ask for more */
 #define WAKEUP_CHARS 256
 
+#define XMIT_FIFO_SIZE 1
+
 static unsigned char current_ctl_bits;
 
 static void change_speed(struct tty_struct *tty, struct serial_state *info,
@@ -114,13 +97,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
 static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
 
 
-static struct serial_state rs_table[1];
-
-#define NR_PORTS ARRAY_SIZE(rs_table)
-
-#include <linux/uaccess.h>
-
-#define serial_isroot()	(capable(CAP_SYS_ADMIN))
+static struct serial_state serial_state;
 
 /* some serial hardware definitions */
 #define SDR_OVRUN   (1<<15)
@@ -161,9 +138,9 @@ static void rs_stop(struct tty_struct *tty)
 	if (info->IER & UART_IER_THRI) {
 		info->IER &= ~UART_IER_THRI;
 		/* disable Tx interrupt and remove any pending interrupts */
-		custom.intena = IF_TBE;
+		amiga_custom.intena = IF_TBE;
 		mb();
-		custom.intreq = IF_TBE;
+		amiga_custom.intreq = IF_TBE;
 		mb();
 	}
 	local_irq_restore(flags);
@@ -179,10 +156,10 @@ static void rs_start(struct tty_struct *tty)
 	    && info->xmit.buf
 	    && !(info->IER & UART_IER_THRI)) {
 		info->IER |= UART_IER_THRI;
-		custom.intena = IF_SETCLR | IF_TBE;
+		amiga_custom.intena = IF_SETCLR | IF_TBE;
 		mb();
 		/* set a pending Tx Interrupt, transmitter should restart now */
-		custom.intreq = IF_SETCLR | IF_TBE;
+		amiga_custom.intreq = IF_SETCLR | IF_TBE;
 		mb();
 	}
 	local_irq_restore(flags);
@@ -191,21 +168,8 @@ static void rs_start(struct tty_struct *tty)
 /*
  * ----------------------------------------------------------------------
  *
- * Here starts the interrupt handling routines.  All of the following
- * subroutines are declared as inline and are folded into
- * rs_interrupt().  They were separated out for readability's sake.
- *
- * Note: rs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off.  People who may want to modify
- * rs_interrupt() should try to keep the interrupt handler as fast as
- * possible.  After you are done making modifications, it is not a bad
- * idea to do:
- * 
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
+ * Here start the interrupt handling routines.
  *
- * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
  * -----------------------------------------------------------------------
  */
 
@@ -220,9 +184,9 @@ static void receive_chars(struct serial_state *info)
 	icount = &info->icount;
 
 	status = UART_LSR_DR; /* We obviously have a character! */
-	serdatr = custom.serdatr;
+	serdatr = amiga_custom.serdatr;
 	mb();
-	custom.intreq = IF_RBF;
+	amiga_custom.intreq = IF_RBF;
 	mb();
 
 	if((serdatr & 0x1ff) == 0)
@@ -299,10 +263,10 @@ out:
 
 static void transmit_chars(struct serial_state *info)
 {
-	custom.intreq = IF_TBE;
+	amiga_custom.intreq = IF_TBE;
 	mb();
 	if (info->x_char) {
-	        custom.serdat = info->x_char | 0x100;
+	        amiga_custom.serdat = info->x_char | 0x100;
 		mb();
 		info->icount.tx++;
 		info->x_char = 0;
@@ -312,12 +276,12 @@ static void transmit_chars(struct serial_state *info)
 	    || info->tport.tty->flow.stopped
 	    || info->tport.tty->hw_stopped) {
 		info->IER &= ~UART_IER_THRI;
-	        custom.intena = IF_TBE;
+	        amiga_custom.intena = IF_TBE;
 		mb();
 		return;
 	}
 
-	custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
+	amiga_custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
 	mb();
 	info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1);
 	info->icount.tx++;
@@ -331,7 +295,7 @@ static void transmit_chars(struct serial_state *info)
 	printk("THRE...");
 #endif
 	if (info->xmit.head == info->xmit.tail) {
-	        custom.intena = IF_TBE;
+	        amiga_custom.intena = IF_TBE;
 		mb();
 		info->IER &= ~UART_IER_THRI;
 	}
@@ -384,10 +348,10 @@ static void check_modem_status(struct serial_state *info)
 #endif
 				port->tty->hw_stopped = 0;
 				info->IER |= UART_IER_THRI;
-				custom.intena = IF_SETCLR | IF_TBE;
+				amiga_custom.intena = IF_SETCLR | IF_TBE;
 				mb();
 				/* set a pending Tx Interrupt, transmitter should restart now */
-				custom.intreq = IF_SETCLR | IF_TBE;
+				amiga_custom.intreq = IF_SETCLR | IF_TBE;
 				mb();
 				tty_wakeup(port->tty);
 				return;
@@ -400,9 +364,9 @@ static void check_modem_status(struct serial_state *info)
 				port->tty->hw_stopped = 1;
 				info->IER &= ~UART_IER_THRI;
 				/* disable Tx interrupt and remove any pending interrupts */
-				custom.intena = IF_TBE;
+				amiga_custom.intena = IF_TBE;
 				mb();
-				custom.intreq = IF_TBE;
+				amiga_custom.intreq = IF_TBE;
 				mb();
 			}
 		}
@@ -444,7 +408,7 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id)
 {
 	struct serial_state *info = dev_id;
 
-	if (custom.serdatr & SDR_TBE) {
+	if (amiga_custom.serdatr & SDR_TBE) {
 #ifdef SERIAL_DEBUG_INTR
 	  printk("ser_tx_int...");
 #endif
@@ -504,20 +468,20 @@ static int startup(struct tty_struct *tty, struct serial_state *info)
 
 	/* Clear anything in the input buffer */
 
-	custom.intreq = IF_RBF;
+	amiga_custom.intreq = IF_RBF;
 	mb();
 
 	retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info);
 	if (retval) {
-	  if (serial_isroot()) {
-	      set_bit(TTY_IO_ERROR, &tty->flags);
-	    retval = 0;
-	  }
-	  goto errout;
+		if (capable(CAP_SYS_ADMIN)) {
+			set_bit(TTY_IO_ERROR, &tty->flags);
+			retval = 0;
+		}
+		goto errout;
 	}
 
 	/* enable both Rx and Tx interrupts */
-	custom.intena = IF_SETCLR | IF_RBF | IF_TBE;
+	amiga_custom.intena = IF_SETCLR | IF_RBF | IF_TBE;
 	mb();
 	info->IER = UART_IER_MSI;
 
@@ -553,13 +517,10 @@ errout:
 static void shutdown(struct tty_struct *tty, struct serial_state *info)
 {
 	unsigned long	flags;
-	struct serial_state *state;
 
 	if (!tty_port_initialized(&info->tport))
 		return;
 
-	state = info;
-
 #ifdef SERIAL_DEBUG_OPEN
 	printk("Shutting down serial port %d ....\n", info->line);
 #endif
@@ -583,11 +544,11 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
 	}
 
 	info->IER = 0;
-	custom.intena = IF_RBF | IF_TBE;
+	amiga_custom.intena = IF_RBF | IF_TBE;
 	mb();
 
 	/* disable break condition */
-	custom.adkcon = AC_UARTBRK;
+	amiga_custom.adkcon = AC_UARTBRK;
 	mb();
 
 	if (C_HUPCL(tty))
@@ -671,7 +632,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
 	if (!quot)
 		quot = baud_base / 9600;
 	info->quot = quot;
-	info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base);
+	info->timeout = (XMIT_FIFO_SIZE*HZ*bits*quot) / baud_base;
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
 	/* CTS flow control flag and modem status interrupts */
@@ -731,7 +692,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
 	if(cval & UART_LCR_PARITY)
 	  serper |= (SERPER_PARENB);
 
-	custom.serper = serper;
+	amiga_custom.serper = serper;
 	mb();
 	}
 
@@ -775,10 +736,10 @@ static void rs_flush_chars(struct tty_struct *tty)
 
 	local_irq_save(flags);
 	info->IER |= UART_IER_THRI;
-	custom.intena = IF_SETCLR | IF_TBE;
+	amiga_custom.intena = IF_SETCLR | IF_TBE;
 	mb();
 	/* set a pending Tx Interrupt, transmitter should restart now */
-	custom.intreq = IF_SETCLR | IF_TBE;
+	amiga_custom.intreq = IF_SETCLR | IF_TBE;
 	mb();
 	local_irq_restore(flags);
 }
@@ -817,10 +778,10 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count
 	    && !(info->IER & UART_IER_THRI)) {
 		info->IER |= UART_IER_THRI;
 		local_irq_disable();
-		custom.intena = IF_SETCLR | IF_TBE;
+		amiga_custom.intena = IF_SETCLR | IF_TBE;
 		mb();
 		/* set a pending Tx Interrupt, transmitter should restart now */
-		custom.intreq = IF_SETCLR | IF_TBE;
+		amiga_custom.intreq = IF_SETCLR | IF_TBE;
 		mb();
 		local_irq_restore(flags);
 	}
@@ -867,11 +828,11 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
 
 	        /* Check this ! */
 	        local_irq_save(flags);
-		if(!(custom.intenar & IF_TBE)) {
-		    custom.intena = IF_SETCLR | IF_TBE;
+		if(!(amiga_custom.intenar & IF_TBE)) {
+		    amiga_custom.intena = IF_SETCLR | IF_TBE;
 		    mb();
 		    /* set a pending Tx Interrupt, transmitter should restart now */
-		    custom.intreq = IF_SETCLR | IF_TBE;
+		    amiga_custom.intreq = IF_SETCLR | IF_TBE;
 		    mb();
 		}
 		local_irq_restore(flags);
@@ -948,7 +909,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 	ss->line = tty->index;
 	ss->port = state->port;
 	ss->flags = state->tport.flags;
-	ss->xmit_fifo_size = state->xmit_fifo_size;
+	ss->xmit_fifo_size = XMIT_FIFO_SIZE;
 	ss->baud_base = state->baud_base;
 	ss->close_delay = close_delay;
 	ss->closing_wait = closing_wait;
@@ -969,7 +930,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 	change_spd = ((ss->flags ^ port->flags) & ASYNC_SPD_MASK) ||
 		ss->custom_divisor != state->custom_divisor;
 	if (ss->irq || ss->port != state->port ||
-			ss->xmit_fifo_size != state->xmit_fifo_size) {
+			ss->xmit_fifo_size != XMIT_FIFO_SIZE) {
 		tty_unlock(tty);
 		return -EINVAL;
 	}
@@ -979,11 +940,10 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 	if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		closing_wait = msecs_to_jiffies(closing_wait * 10);
 
-	if (!serial_isroot()) {
+	if (!capable(CAP_SYS_ADMIN)) {
 		if ((ss->baud_base != state->baud_base) ||
 		    (close_delay != port->close_delay) ||
 		    (closing_wait != port->closing_wait) ||
-		    (ss->xmit_fifo_size != state->xmit_fifo_size) ||
 		    ((ss->flags & ~ASYNC_USR_MASK) !=
 		     (port->flags & ~ASYNC_USR_MASK))) {
 			tty_unlock(tty);
@@ -1043,7 +1003,7 @@ static int get_lsr_info(struct serial_state *info, unsigned int __user *value)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	status = custom.serdatr;
+	status = amiga_custom.serdatr;
 	mb();
 	local_irq_restore(flags);
 	result = ((status & SDR_TSRE) ? TIOCSER_TEMT : 0);
@@ -1105,9 +1065,9 @@ static int rs_break(struct tty_struct *tty, int break_state)
 
 	local_irq_save(flags);
 	if (break_state == -1)
-	  custom.adkcon = AC_SETCLR | AC_UARTBRK;
+	  amiga_custom.adkcon = AC_SETCLR | AC_UARTBRK;
 	else
-	  custom.adkcon = AC_UARTBRK;
+	  amiga_custom.adkcon = AC_UARTBRK;
 	mb();
 	local_irq_restore(flags);
 	return 0;
@@ -1284,10 +1244,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	state->read_status_mask &= ~UART_LSR_DR;
 	if (tty_port_initialized(port)) {
 	        /* disable receive interrupts */
-	        custom.intena = IF_RBF;
+	        amiga_custom.intena = IF_RBF;
 		mb();
 		/* clear any pending receive interrupt */
-		custom.intreq = IF_RBF;
+		amiga_custom.intreq = IF_RBF;
 		mb();
 
 		/*
@@ -1315,9 +1275,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 	unsigned long orig_jiffies, char_time;
 	int lsr;
 
-	if (info->xmit_fifo_size == 0)
-		return; /* Just in case.... */
-
 	orig_jiffies = jiffies;
 
 	/*
@@ -1328,7 +1285,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 	 * Note: we have to use pretty tight timings here to satisfy
 	 * the NIST-PCTS.
 	 */
-	char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
+	char_time = (info->timeout - HZ/50) / XMIT_FIFO_SIZE;
 	char_time = char_time / 5;
 	if (char_time == 0)
 		char_time = 1;
@@ -1349,7 +1306,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 	printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
 	printk("jiff=%lu...", jiffies);
 #endif
-	while(!((lsr = custom.serdatr) & SDR_TSRE)) {
+	while(!((lsr = amiga_custom.serdatr) & SDR_TSRE)) {
 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
 		printk("serdatr = %d (jiff=%lu)...", lsr, jiffies);
 #endif
@@ -1389,14 +1346,14 @@ static void rs_hangup(struct tty_struct *tty)
  */
 static int rs_open(struct tty_struct *tty, struct file * filp)
 {
-	struct serial_state *info = rs_table + tty->index;
-	struct tty_port *port = &info->tport;
+	struct tty_port *port = tty->port;
+	struct serial_state *info = container_of(port, struct serial_state,
+			tport);
 	int retval;
 
 	port->count++;
 	port->tty = tty;
 	tty->driver_data = info;
-	tty->port = port;
 
 	retval = startup(tty, info);
 	if (retval) {
@@ -1461,8 +1418,8 @@ static inline void line_info(struct seq_file *m, int line,
 
 static int rs_proc_show(struct seq_file *m, void *v)
 {
-	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
-	line_info(m, 0, &rs_table[0]);
+	seq_printf(m, "serinfo:1.0 driver:4.30\n");
+	line_info(m, 0, &serial_state);
 	return 0;
 }
 
@@ -1474,17 +1431,6 @@ static int rs_proc_show(struct seq_file *m, void *v)
  * ---------------------------------------------------------------------
  */
 
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static void show_serial_version(void)
-{
- 	printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
-}
-
-
 static const struct tty_operations serial_ops = {
 	.open = rs_open,
 	.close = rs_close,
@@ -1543,52 +1489,43 @@ static const struct tty_port_operations amiga_port_ops = {
  */
 static int __init amiga_serial_probe(struct platform_device *pdev)
 {
+	struct serial_state *state = &serial_state;
+	struct tty_driver *driver;
 	unsigned long flags;
-	struct serial_state * state;
 	int error;
 
-	serial_driver = alloc_tty_driver(NR_PORTS);
-	if (!serial_driver)
-		return -ENOMEM;
-
-	show_serial_version();
+	driver = tty_alloc_driver(1, TTY_DRIVER_REAL_RAW);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
 
 	/* Initialize the tty_driver structure */
 
-	serial_driver->driver_name = "amiserial";
-	serial_driver->name = "ttyS";
-	serial_driver->major = TTY_MAJOR;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag =
+	driver->driver_name = "amiserial";
+	driver->name = "ttyS";
+	driver->major = TTY_MAJOR;
+	driver->minor_start = 64;
+	driver->type = TTY_DRIVER_TYPE_SERIAL;
+	driver->subtype = SERIAL_TYPE_NORMAL;
+	driver->init_termios = tty_std_termios;
+	driver->init_termios.c_cflag =
 		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(serial_driver, &serial_ops);
-
-	state = rs_table;
-	state->port = (int)&custom.serdatr; /* Just to give it a value */
-	state->custom_divisor = 0;
-	state->icount.cts = state->icount.dsr = 
-	  state->icount.rng = state->icount.dcd = 0;
-	state->icount.rx = state->icount.tx = 0;
-	state->icount.frame = state->icount.parity = 0;
-	state->icount.overrun = state->icount.brk = 0;
+	tty_set_operations(driver, &serial_ops);
+
+	memset(state, 0, sizeof(*state));
+	state->port = (int)&amiga_custom.serdatr; /* Just to give it a value */
 	tty_port_init(&state->tport);
 	state->tport.ops = &amiga_port_ops;
-	tty_port_link_device(&state->tport, serial_driver, 0);
+	tty_port_link_device(&state->tport, driver, 0);
 
-	error = tty_register_driver(serial_driver);
+	error = tty_register_driver(driver);
 	if (error)
-		goto fail_put_tty_driver;
+		goto fail_tty_driver_kref_put;
 
 	printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n");
 
 	/* Hardware set up */
 
 	state->baud_base = amiga_colorclock;
-	state->xmit_fifo_size = 1;
 
 	/* set ISRs, and then disable the rx interrupts */
 	error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
@@ -1603,11 +1540,11 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
 	local_irq_save(flags);
 
 	/* turn off Rx and Tx interrupts */
-	custom.intena = IF_RBF | IF_TBE;
+	amiga_custom.intena = IF_RBF | IF_TBE;
 	mb();
 
 	/* clear any pending interrupt */
-	custom.intreq = IF_RBF | IF_TBE;
+	amiga_custom.intreq = IF_RBF | IF_TBE;
 	mb();
 
 	local_irq_restore(flags);
@@ -1621,15 +1558,17 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, state);
 
+	serial_driver = driver;
+
 	return 0;
 
 fail_free_irq:
 	free_irq(IRQ_AMIGA_TBE, state);
 fail_unregister:
-	tty_unregister_driver(serial_driver);
-fail_put_tty_driver:
+	tty_unregister_driver(driver);
+fail_tty_driver_kref_put:
 	tty_port_destroy(&state->tport);
-	put_tty_driver(serial_driver);
+	tty_driver_kref_put(driver);
 	return error;
 }
 
@@ -1637,9 +1576,8 @@ static int __exit amiga_serial_remove(struct platform_device *pdev)
 {
 	struct serial_state *state = platform_get_drvdata(pdev);
 
-	/* printk("Unloading %s: version %s\n", serial_name, serial_version); */
 	tty_unregister_driver(serial_driver);
-	put_tty_driver(serial_driver);
+	tty_driver_kref_put(serial_driver);
 	tty_port_destroy(&state->tport);
 
 	free_irq(IRQ_AMIGA_TBE, state);
@@ -1668,8 +1606,8 @@ module_platform_driver_probe(amiga_serial_driver, amiga_serial_probe);
 
 static void amiga_serial_putc(char c)
 {
-	custom.serdat = (unsigned char)c | 0x100;
-	while (!(custom.serdatr & 0x2000))
+	amiga_custom.serdat = (unsigned char)c | 0x100;
+	while (!(amiga_custom.serdatr & 0x2000))
 		barrier();
 }
 
@@ -1682,9 +1620,9 @@ static void amiga_serial_putc(char c)
 static void serial_console_write(struct console *co, const char *s,
 				unsigned count)
 {
-	unsigned short intena = custom.intenar;
+	unsigned short intena = amiga_custom.intenar;
 
-	custom.intena = IF_TBE;
+	amiga_custom.intena = IF_TBE;
 
 	while (count--) {
 		if (*s == '\n')
@@ -1692,7 +1630,7 @@ static void serial_console_write(struct console *co, const char *s,
 		amiga_serial_putc(*s++);
 	}
 
-	custom.intena = IF_SETCLR | (intena & IF_TBE);
+	amiga_custom.intena = IF_SETCLR | (intena & IF_TBE);
 }
 
 static struct tty_driver *serial_console_device(struct console *c, int *index)
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 445e5ff9b36d..19d32cb6af84 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -751,6 +751,7 @@ static struct platform_driver ehv_bc_tty_driver = {
  */
 static int __init ehv_bc_init(void)
 {
+	struct tty_driver *driver;
 	struct device_node *np;
 	unsigned int count = 0; /* Number of elements in bcs[] */
 	int ret;
@@ -773,26 +774,28 @@ static int __init ehv_bc_init(void)
 	if (!bcs)
 		return -ENOMEM;
 
-	ehv_bc_driver = alloc_tty_driver(count);
-	if (!ehv_bc_driver) {
-		ret = -ENOMEM;
+	driver = tty_alloc_driver(count, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(driver)) {
+		ret = PTR_ERR(driver);
 		goto err_free_bcs;
 	}
 
-	ehv_bc_driver->driver_name = "ehv-bc";
-	ehv_bc_driver->name = ehv_bc_console.name;
-	ehv_bc_driver->type = TTY_DRIVER_TYPE_CONSOLE;
-	ehv_bc_driver->subtype = SYSTEM_TYPE_CONSOLE;
-	ehv_bc_driver->init_termios = tty_std_termios;
-	ehv_bc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	tty_set_operations(ehv_bc_driver, &ehv_bc_ops);
+	driver->driver_name = "ehv-bc";
+	driver->name = ehv_bc_console.name;
+	driver->type = TTY_DRIVER_TYPE_CONSOLE;
+	driver->subtype = SYSTEM_TYPE_CONSOLE;
+	driver->init_termios = tty_std_termios;
+	tty_set_operations(driver, &ehv_bc_ops);
 
-	ret = tty_register_driver(ehv_bc_driver);
+	ret = tty_register_driver(driver);
 	if (ret) {
 		pr_err("ehv-bc: could not register tty driver (ret=%i)\n", ret);
-		goto err_put_tty_driver;
+		goto err_tty_driver_kref_put;
 	}
 
+	ehv_bc_driver = driver;
+
 	ret = platform_driver_register(&ehv_bc_tty_driver);
 	if (ret) {
 		pr_err("ehv-bc: could not register platform driver (ret=%i)\n",
@@ -803,9 +806,10 @@ static int __init ehv_bc_init(void)
 	return 0;
 
 err_deregister_tty_driver:
-	tty_unregister_driver(ehv_bc_driver);
-err_put_tty_driver:
-	put_tty_driver(ehv_bc_driver);
+	ehv_bc_driver = NULL;
+	tty_unregister_driver(driver);
+err_tty_driver_kref_put:
+	tty_driver_kref_put(driver);
 err_free_bcs:
 	kfree(bcs);
 
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index ccb683a6e6f5..d24af649a8bb 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -253,18 +253,18 @@ static int goldfish_tty_create_driver(void)
 		ret = -ENOMEM;
 		goto err_alloc_goldfish_ttys_failed;
 	}
-	tty = alloc_tty_driver(goldfish_tty_line_count);
-	if (tty == NULL) {
-		ret = -ENOMEM;
-		goto err_alloc_tty_driver_failed;
+	tty = tty_alloc_driver(goldfish_tty_line_count,
+			TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(tty)) {
+		ret = PTR_ERR(tty);
+		goto err_tty_alloc_driver_failed;
 	}
 	tty->driver_name = "goldfish";
 	tty->name = "ttyGF";
 	tty->type = TTY_DRIVER_TYPE_SERIAL;
 	tty->subtype = SERIAL_TYPE_NORMAL;
 	tty->init_termios = tty_std_termios;
-	tty->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
-						TTY_DRIVER_DYNAMIC_DEV;
 	tty_set_operations(tty, &goldfish_tty_ops);
 	ret = tty_register_driver(tty);
 	if (ret)
@@ -274,8 +274,8 @@ static int goldfish_tty_create_driver(void)
 	return 0;
 
 err_tty_register_driver_failed:
-	put_tty_driver(tty);
-err_alloc_tty_driver_failed:
+	tty_driver_kref_put(tty);
+err_tty_alloc_driver_failed:
 	kfree(goldfish_ttys);
 	goldfish_ttys = NULL;
 err_alloc_goldfish_ttys_failed:
@@ -285,7 +285,7 @@ err_alloc_goldfish_ttys_failed:
 static void goldfish_tty_delete_driver(void)
 {
 	tty_unregister_driver(goldfish_tty_driver);
-	put_tty_driver(goldfish_tty_driver);
+	tty_driver_kref_put(goldfish_tty_driver);
 	goldfish_tty_driver = NULL;
 	kfree(goldfish_ttys);
 	goldfish_ttys = NULL;
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 5bb8c4e44961..7b30d5a05e2f 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -1021,9 +1021,10 @@ static int hvc_init(void)
 	int err;
 
 	/* We need more than hvc_count adapters due to hotplug additions. */
-	drv = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS);
-	if (!drv) {
-		err = -ENOMEM;
+	drv = tty_alloc_driver(HVC_ALLOC_TTY_ADAPTERS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_RESET_TERMIOS);
+	if (IS_ERR(drv)) {
+		err = PTR_ERR(drv);
 		goto out;
 	}
 
@@ -1033,7 +1034,6 @@ static int hvc_init(void)
 	drv->minor_start = HVC_MINOR;
 	drv->type = TTY_DRIVER_TYPE_SYSTEM;
 	drv->init_termios = tty_std_termios;
-	drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
 	tty_set_operations(drv, &hvc_ops);
 
 	/* Always start the kthread because there can be hotplug vty adapters
@@ -1063,7 +1063,7 @@ stop_thread:
 	kthread_stop(hvc_task);
 	hvc_task = NULL;
 put_tty:
-	put_tty_driver(drv);
+	tty_driver_kref_put(drv);
 out:
 	return err;
 }
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 92c9a476defc..8f143c09a169 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -86,7 +86,11 @@ static int __write_console(struct xencons_info *xencons,
 	cons = intf->out_cons;
 	prod = intf->out_prod;
 	mb();			/* update queue values before going on */
-	BUG_ON((prod - cons) > sizeof(intf->out));
+
+	if ((prod - cons) > sizeof(intf->out)) {
+		pr_err_once("xencons: Illegal ring page indices");
+		return -EINVAL;
+	}
 
 	while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
 		intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
@@ -114,7 +118,10 @@ static int domU_write_console(uint32_t vtermno, const char *data, int len)
 	 */
 	while (len) {
 		int sent = __write_console(cons, data, len);
-		
+
+		if (sent < 0)
+			return sent;
+
 		data += sent;
 		len -= sent;
 
@@ -138,7 +145,11 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
 	cons = intf->in_cons;
 	prod = intf->in_prod;
 	mb();			/* get pointers before reading ring */
-	BUG_ON((prod - cons) > sizeof(intf->in));
+
+	if ((prod - cons) > sizeof(intf->in)) {
+		pr_err_once("xencons: Illegal ring page indices");
+		return -EINVAL;
+	}
 
 	while (cons != prod && recv < len)
 		buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index fe5e6b4f43de..245da1dfd818 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1445,10 +1445,11 @@ static int hvcs_initialize(void)
 	} else
 		num_ttys_to_alloc = hvcs_parm_num_devs;
 
-	hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc);
-	if (!hvcs_tty_driver) {
+	hvcs_tty_driver = tty_alloc_driver(num_ttys_to_alloc,
+			TTY_DRIVER_REAL_RAW);
+	if (IS_ERR(hvcs_tty_driver)) {
 		mutex_unlock(&hvcs_init_mutex);
-		return -ENOMEM;
+		return PTR_ERR(hvcs_tty_driver);
 	}
 
 	if (hvcs_alloc_index_list(num_ttys_to_alloc)) {
@@ -1473,7 +1474,6 @@ static int hvcs_initialize(void)
 	 * throw us into a horrible recursive echo-echo-echo loop.
 	 */
 	hvcs_tty_driver->init_termios = hvcs_tty_termios;
-	hvcs_tty_driver->flags = TTY_DRIVER_REAL_RAW;
 
 	tty_set_operations(hvcs_tty_driver, &hvcs_ops);
 
@@ -1509,7 +1509,7 @@ buff_alloc_fail:
 register_fail:
 	hvcs_free_index_list();
 index_fail:
-	put_tty_driver(hvcs_tty_driver);
+	tty_driver_kref_put(hvcs_tty_driver);
 	hvcs_tty_driver = NULL;
 	mutex_unlock(&hvcs_init_mutex);
 	return rc;
@@ -1562,7 +1562,7 @@ static void __exit hvcs_module_exit(void)
 
 	hvcs_free_index_list();
 
-	put_tty_driver(hvcs_tty_driver);
+	tty_driver_kref_put(hvcs_tty_driver);
 
 	printk(KERN_INFO "HVCS: driver module removed.\n");
 }
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index bfc15279d5bc..aa81f4835fef 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1038,29 +1038,29 @@ static const struct tty_operations hvsi_ops = {
 
 static int __init hvsi_init(void)
 {
-	int i;
-
-	hvsi_driver = alloc_tty_driver(hvsi_count);
-	if (!hvsi_driver)
-		return -ENOMEM;
-
-	hvsi_driver->driver_name = "hvsi";
-	hvsi_driver->name = "hvsi";
-	hvsi_driver->major = HVSI_MAJOR;
-	hvsi_driver->minor_start = HVSI_MINOR;
-	hvsi_driver->type = TTY_DRIVER_TYPE_SYSTEM;
-	hvsi_driver->init_termios = tty_std_termios;
-	hvsi_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
-	hvsi_driver->init_termios.c_ispeed = 9600;
-	hvsi_driver->init_termios.c_ospeed = 9600;
-	hvsi_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(hvsi_driver, &hvsi_ops);
+	struct tty_driver *driver;
+	int i, ret;
+
+	driver = tty_alloc_driver(hvsi_count, TTY_DRIVER_REAL_RAW);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
+
+	driver->driver_name = "hvsi";
+	driver->name = "hvsi";
+	driver->major = HVSI_MAJOR;
+	driver->minor_start = HVSI_MINOR;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->init_termios = tty_std_termios;
+	driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
+	driver->init_termios.c_ispeed = 9600;
+	driver->init_termios.c_ospeed = 9600;
+	tty_set_operations(driver, &hvsi_ops);
 
 	for (i=0; i < hvsi_count; i++) {
 		struct hvsi_struct *hp = &hvsi_ports[i];
 		int ret = 1;
 
-		tty_port_link_device(&hp->port, hvsi_driver, i);
+		tty_port_link_device(&hp->port, driver, i);
 
 		ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp);
 		if (ret)
@@ -1069,12 +1069,27 @@ static int __init hvsi_init(void)
 	}
 	hvsi_wait = wait_for_state; /* irqs active now */
 
-	if (tty_register_driver(hvsi_driver))
-		panic("Couldn't register hvsi console driver\n");
+	ret = tty_register_driver(driver);
+	if (ret) {
+		pr_err("Couldn't register hvsi console driver\n");
+		goto err_free_irq;
+	}
+
+	hvsi_driver = driver;
 
 	printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
 
 	return 0;
+err_free_irq:
+	hvsi_wait = poll_for_state;
+	for (i = 0; i < hvsi_count; i++) {
+		struct hvsi_struct *hp = &hvsi_ports[i];
+
+		free_irq(hp->virq, hp);
+	}
+	tty_driver_kref_put(driver);
+
+	return ret;
 }
 device_initcall(hvsi_init);
 
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index e3a5a5ba752c..9edd5ae17580 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -564,9 +564,10 @@ int ipwireless_tty_init(void)
 {
 	int result;
 
-	ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS);
-	if (!ipw_tty_driver)
-		return -ENOMEM;
+	ipw_tty_driver = tty_alloc_driver(IPWIRELESS_PCMCIA_MINORS,
+			TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(ipw_tty_driver))
+		return PTR_ERR(ipw_tty_driver);
 
 	ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME;
 	ipw_tty_driver->name = "ttyIPWp";
@@ -574,7 +575,6 @@ int ipwireless_tty_init(void)
 	ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START;
 	ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 	ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL;
-	ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	ipw_tty_driver->init_termios = tty_std_termios;
 	ipw_tty_driver->init_termios.c_cflag =
 	    B9600 | CS8 | CREAD | HUPCL | CLOCAL;
@@ -585,7 +585,7 @@ int ipwireless_tty_init(void)
 	if (result) {
 		printk(KERN_ERR IPWIRELESS_PCCARD_NAME
 		       ": failed to register tty driver\n");
-		put_tty_driver(ipw_tty_driver);
+		tty_driver_kref_put(ipw_tty_driver);
 		return result;
 	}
 
@@ -595,7 +595,7 @@ int ipwireless_tty_init(void)
 void ipwireless_tty_release(void)
 {
 	tty_unregister_driver(ipw_tty_driver);
-	put_tty_driver(ipw_tty_driver);
+	tty_driver_kref_put(ipw_tty_driver);
 }
 
 int ipwireless_tty_is_modem(struct ipw_tty *tty)
diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c
index 3b5915b94fac..02c10a968de1 100644
--- a/drivers/tty/mips_ejtag_fdc.c
+++ b/drivers/tty/mips_ejtag_fdc.c
@@ -1042,7 +1042,7 @@ err_destroy_ports:
 		dport = &priv->ports[nport];
 		tty_port_destroy(&dport->port);
 	}
-	put_tty_driver(priv->driver);
+	tty_driver_kref_put(priv->driver);
 	return ret;
 }
 
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 64b18177c790..bf17e90858b8 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -1053,7 +1053,7 @@ static int __init moxa_init(void)
 
 	if (tty_register_driver(moxaDriver)) {
 		printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
-		put_tty_driver(moxaDriver);
+		tty_driver_kref_put(moxaDriver);
 		return -1;
 	}
 
@@ -1119,7 +1119,7 @@ static void __exit moxa_exit(void)
 	del_timer_sync(&moxaTimer);
 
 	tty_unregister_driver(moxaDriver);
-	put_tty_driver(moxaDriver);
+	tty_driver_kref_put(moxaDriver);
 }
 
 module_init(moxa_init);
@@ -2034,10 +2034,10 @@ static int moxa_get_serial_info(struct tty_struct *tty,
 	if (!info)
 		return -ENODEV;
 	mutex_lock(&info->port.mutex);
-	ss->type = info->type,
-	ss->line = info->port.tty->index,
-	ss->flags = info->port.flags,
-	ss->baud_base = 921600,
+	ss->type = info->type;
+	ss->line = info->port.tty->index;
+	ss->flags = info->port.flags;
+	ss->baud_base = 921600;
 	ss->close_delay = jiffies_to_msecs(info->port.close_delay) / 10;
 	mutex_unlock(&info->port.mutex);
 	return 0;
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 900ccb2ca166..1216f3985e18 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1039,12 +1039,12 @@ static int mxser_get_serial_info(struct tty_struct *tty,
 	if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		closing_wait = jiffies_to_msecs(closing_wait) / 10;
 
-	ss->type = info->type,
-	ss->line = tty->index,
-	ss->port = info->ioaddr,
-	ss->irq = info->board->irq,
-	ss->flags = info->port.flags,
-	ss->baud_base = MXSER_BAUD_BASE,
+	ss->type = info->type;
+	ss->line = tty->index;
+	ss->port = info->ioaddr;
+	ss->irq = info->board->irq;
+	ss->flags = info->port.flags;
+	ss->baud_base = MXSER_BAUD_BASE;
 	ss->close_delay = close_delay;
 	ss->closing_wait = closing_wait;
 	ss->custom_divisor = MXSER_CUSTOM_DIVISOR,
@@ -1976,9 +1976,10 @@ static int __init mxser_module_init(void)
 {
 	int retval;
 
-	mxvar_sdriver = alloc_tty_driver(MXSER_PORTS);
-	if (!mxvar_sdriver)
-		return -ENOMEM;
+	mxvar_sdriver = tty_alloc_driver(MXSER_PORTS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(mxvar_sdriver))
+		return PTR_ERR(mxvar_sdriver);
 
 	/* Initialize the tty_driver structure */
 	mxvar_sdriver->name = "ttyMI";
@@ -1988,7 +1989,6 @@ static int __init mxser_module_init(void)
 	mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
 	mxvar_sdriver->init_termios = tty_std_termios;
 	mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
-	mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
 	tty_set_operations(mxvar_sdriver, &mxser_ops);
 
 	retval = tty_register_driver(mxvar_sdriver);
@@ -2008,7 +2008,7 @@ static int __init mxser_module_init(void)
 err_unr:
 	tty_unregister_driver(mxvar_sdriver);
 err_put:
-	put_tty_driver(mxvar_sdriver);
+	tty_driver_kref_put(mxvar_sdriver);
 	return retval;
 }
 
@@ -2016,7 +2016,7 @@ static void __exit mxser_module_exit(void)
 {
 	pci_unregister_driver(&mxser_driver);
 	tty_unregister_driver(mxvar_sdriver);
-	put_tty_driver(mxvar_sdriver);
+	tty_driver_kref_put(mxvar_sdriver);
 }
 
 module_init(mxser_module_init);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index e907b7a5cab5..1d92d2a84889 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -3252,10 +3252,11 @@ static int __init gsm_init(void)
 		return status;
 	}
 
-	gsm_tty_driver = alloc_tty_driver(256);
-	if (!gsm_tty_driver) {
+	gsm_tty_driver = tty_alloc_driver(256, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
+	if (IS_ERR(gsm_tty_driver)) {
 		pr_err("gsm_init: tty allocation failed.\n");
-		status = -ENOMEM;
+		status = PTR_ERR(gsm_tty_driver);
 		goto err_unreg_ldisc;
 	}
 	gsm_tty_driver->driver_name	= "gsmtty";
@@ -3264,8 +3265,6 @@ static int __init gsm_init(void)
 	gsm_tty_driver->minor_start	= 0;
 	gsm_tty_driver->type		= TTY_DRIVER_TYPE_SERIAL;
 	gsm_tty_driver->subtype	= SERIAL_TYPE_NORMAL;
-	gsm_tty_driver->flags	= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV
-						| TTY_DRIVER_HARDWARE_BREAK;
 	gsm_tty_driver->init_termios	= tty_std_termios;
 	/* Fixme */
 	gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
@@ -3280,7 +3279,7 @@ static int __init gsm_init(void)
 			gsm_tty_driver->major, gsm_tty_driver->minor_start);
 	return 0;
 err_put_driver:
-	put_tty_driver(gsm_tty_driver);
+	tty_driver_kref_put(gsm_tty_driver);
 err_unreg_ldisc:
 	tty_unregister_ldisc(&tty_ldisc_packet);
 	return status;
@@ -3290,7 +3289,7 @@ static void __exit gsm_exit(void)
 {
 	tty_unregister_ldisc(&tty_ldisc_packet);
 	tty_unregister_driver(gsm_tty_driver);
-	put_tty_driver(gsm_tty_driver);
+	tty_driver_kref_put(gsm_tty_driver);
 }
 
 module_init(gsm_init);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 0c80f25c8c3d..0454c78deee6 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1824,16 +1824,16 @@ static __init int nozomi_init(void)
 {
 	int ret;
 
-	ntty_driver = alloc_tty_driver(NTTY_TTY_MAXMINORS);
-	if (!ntty_driver)
-		return -ENOMEM;
+	ntty_driver = tty_alloc_driver(NTTY_TTY_MAXMINORS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(ntty_driver))
+		return PTR_ERR(ntty_driver);
 
 	ntty_driver->driver_name = NOZOMI_NAME_TTY;
 	ntty_driver->name = "noz";
 	ntty_driver->major = 0;
 	ntty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 	ntty_driver->subtype = SERIAL_TYPE_NORMAL;
-	ntty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	ntty_driver->init_termios = tty_std_termios;
 	ntty_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | \
 						HUPCL | CLOCAL;
@@ -1857,7 +1857,7 @@ static __init int nozomi_init(void)
 unr_tty:
 	tty_unregister_driver(ntty_driver);
 free_tty:
-	put_tty_driver(ntty_driver);
+	tty_driver_kref_put(ntty_driver);
 	return ret;
 }
 
@@ -1865,7 +1865,7 @@ static __exit void nozomi_exit(void)
 {
 	pci_unregister_driver(&nozomi_driver);
 	tty_unregister_driver(ntty_driver);
-	put_tty_driver(ntty_driver);
+	tty_driver_kref_put(ntty_driver);
 }
 
 module_init(nozomi_init);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 92498961fd92..f1324fe99378 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -562,23 +562,45 @@ struct acpi_serdev_lookup {
 	int index;
 };
 
+/**
+ * serdev_acpi_get_uart_resource - Gets UARTSerialBus resource if type matches
+ * @ares:	ACPI resource
+ * @uart:	Pointer to UARTSerialBus resource will be returned here
+ *
+ * Checks if the given ACPI resource is of type UARTSerialBus.
+ * In this case, returns a pointer to it to the caller.
+ *
+ * Return: True if resource type is of UARTSerialBus, otherwise false.
+ */
+bool serdev_acpi_get_uart_resource(struct acpi_resource *ares,
+				   struct acpi_resource_uart_serialbus **uart)
+{
+	struct acpi_resource_uart_serialbus *sb;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+		return false;
+
+	sb = &ares->data.uart_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_UART)
+		return false;
+
+	*uart = sb;
+	return true;
+}
+EXPORT_SYMBOL_GPL(serdev_acpi_get_uart_resource);
+
 static int acpi_serdev_parse_resource(struct acpi_resource *ares, void *data)
 {
 	struct acpi_serdev_lookup *lookup = data;
 	struct acpi_resource_uart_serialbus *sb;
 	acpi_status status;
 
-	if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
-		return 1;
-
-	if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART)
+	if (!serdev_acpi_get_uart_resource(ares, &sb))
 		return 1;
 
 	if (lookup->index != -1 && lookup->n++ != lookup->index)
 		return 1;
 
-	sb = &ares->data.uart_serial_bus;
-
 	status = acpi_get_handle(lookup->device_handle,
 				 sb->resource_source.string_ptr,
 				 &lookup->controller_handle);
@@ -586,7 +608,7 @@ static int acpi_serdev_parse_resource(struct acpi_resource *ares, void *data)
 		return 1;
 
 	/*
-	 * NOTE: Ideally, we would also want to retreive other properties here,
+	 * NOTE: Ideally, we would also want to retrieve other properties here,
 	 * once setting them before opening the device is supported by serdev.
 	 */
 
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 725a450058f8..7f656fac503f 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -941,7 +941,7 @@ static int brcmuart_probe(struct platform_device *pdev)
 	struct clk *baud_mux_clk;
 	struct uart_8250_port up;
 	struct resource *irq;
-	void __iomem *membase = 0;
+	void __iomem *membase = NULL;
 	resource_size_t mapbase = 0;
 	u32 clk_rate = 0;
 	int ret;
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 3ffeedc29c83..d502240bbcf2 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -114,6 +114,7 @@ struct exar8250;
 struct exar8250_platform {
 	int (*rs485_config)(struct uart_port *, struct serial_rs485 *);
 	int (*register_gpio)(struct pci_dev *, struct uart_8250_port *);
+	void (*unregister_gpio)(struct uart_8250_port *);
 };
 
 /**
@@ -352,9 +353,8 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
 	writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
 }
 
-static void *
-__xr17v35x_register_gpio(struct pci_dev *pcidev,
-			 const struct software_node *node)
+static struct platform_device *__xr17v35x_register_gpio(struct pci_dev *pcidev,
+							const struct software_node *node)
 {
 	struct platform_device *pdev;
 
@@ -374,6 +374,12 @@ __xr17v35x_register_gpio(struct pci_dev *pcidev,
 	return pdev;
 }
 
+static void __xr17v35x_unregister_gpio(struct platform_device *pdev)
+{
+	device_remove_software_node(&pdev->dev);
+	platform_device_unregister(pdev);
+}
+
 static const struct property_entry exar_gpio_properties[] = {
 	PROPERTY_ENTRY_U32("exar,first-pin", 0),
 	PROPERTY_ENTRY_U32("ngpios", 16),
@@ -384,8 +390,7 @@ static const struct software_node exar_gpio_node = {
 	.properties = exar_gpio_properties,
 };
 
-static int xr17v35x_register_gpio(struct pci_dev *pcidev,
-				  struct uart_8250_port *port)
+static int xr17v35x_register_gpio(struct pci_dev *pcidev, struct uart_8250_port *port)
 {
 	if (pcidev->vendor == PCI_VENDOR_ID_EXAR)
 		port->port.private_data =
@@ -394,6 +399,15 @@ static int xr17v35x_register_gpio(struct pci_dev *pcidev,
 	return 0;
 }
 
+static void xr17v35x_unregister_gpio(struct uart_8250_port *port)
+{
+	if (!port->port.private_data)
+		return;
+
+	__xr17v35x_unregister_gpio(port->port.private_data);
+	port->port.private_data = NULL;
+}
+
 static int generic_rs485_config(struct uart_port *port,
 				struct serial_rs485 *rs485)
 {
@@ -419,6 +433,7 @@ static int generic_rs485_config(struct uart_port *port,
 
 static const struct exar8250_platform exar8250_default_platform = {
 	.register_gpio = xr17v35x_register_gpio,
+	.unregister_gpio = xr17v35x_unregister_gpio,
 	.rs485_config = generic_rs485_config,
 };
 
@@ -484,6 +499,7 @@ static int iot2040_register_gpio(struct pci_dev *pcidev,
 static const struct exar8250_platform iot2040_platform = {
 	.rs485_config = iot2040_rs485_config,
 	.register_gpio = iot2040_register_gpio,
+	.unregister_gpio = xr17v35x_unregister_gpio,
 };
 
 /*
@@ -555,17 +571,11 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 
 static void pci_xr17v35x_exit(struct pci_dev *pcidev)
 {
+	const struct exar8250_platform *platform = exar_get_platform();
 	struct exar8250 *priv = pci_get_drvdata(pcidev);
 	struct uart_8250_port *port = serial8250_get_port(priv->line[0]);
-	struct platform_device *pdev;
 
-	pdev = port->port.private_data;
-	if (!pdev)
-		return;
-
-	device_remove_software_node(&pdev->dev);
-	platform_device_unregister(pdev);
-	port->port.private_data = NULL;
+	platform->unregister_gpio(port);
 }
 
 static inline void exar_misc_clear(struct exar8250 *priv)
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 988bf6bcce42..65402d05eff9 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -209,16 +209,14 @@ static int ingenic_uart_probe(struct platform_device *pdev)
 	struct uart_8250_port uart = {};
 	struct ingenic_uart_data *data;
 	const struct ingenic_uart_config *cdata;
-	const struct of_device_id *match;
 	struct resource *regs;
 	int irq, err, line;
 
-	match = of_match_device(of_match, &pdev->dev);
-	if (!match) {
+	cdata = of_device_get_match_data(&pdev->dev);
+	if (!cdata) {
 		dev_err(&pdev->dev, "Error: No device match found\n");
 		return -ENODEV;
 	}
-	cdata = match->data;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 4dee8a9e0c95..848d81e3838c 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -158,6 +158,16 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 
 static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 {
+	struct uart_8250_dma *dma = &lpss->data.dma;
+	struct uart_8250_port *up = up_to_u8250p(port);
+
+	/*
+	 * This simply makes the checks in the 8250_port to try the DMA
+	 * channel request which in turn uses the magic of ACPI tables
+	 * parsing (see drivers/dma/acpi-dma.c for the details) and
+	 * matching with the registered General Purpose DMA controllers.
+	 */
+	up->dma = dma;
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 79418d4beb48..891fd8345e25 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -538,7 +538,7 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state,
 static void omap_serial_fill_features_erratas(struct uart_8250_port *up,
 					      struct omap8250_priv *priv)
 {
-	const struct soc_device_attribute k3_soc_devices[] = {
+	static const struct soc_device_attribute k3_soc_devices[] = {
 		{ .family = "AM65X",  },
 		{ .family = "J721E", .revision = "SR1.0" },
 		{ /* sentinel */ }
@@ -617,7 +617,7 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 	struct uart_port *port = dev_id;
 	struct omap8250_priv *priv = port->private_data;
 	struct uart_8250_port *up = up_to_u8250p(port);
-	unsigned int iir;
+	unsigned int iir, lsr;
 	int ret;
 
 #ifdef CONFIG_SERIAL_8250_DMA
@@ -628,6 +628,7 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 #endif
 
 	serial8250_rpm_get(up);
+	lsr = serial_port_in(port, UART_LSR);
 	iir = serial_port_in(port, UART_IIR);
 	ret = serial8250_handle_irq(port, iir);
 
@@ -642,6 +643,24 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 		serial_port_in(port, UART_RX);
 	}
 
+	/* Stop processing interrupts on input overrun */
+	if ((lsr & UART_LSR_OE) && up->overrun_backoff_time_ms > 0) {
+		unsigned long delay;
+
+		up->ier = port->serial_in(port, UART_IER);
+		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
+			port->ops->stop_rx(port);
+		} else {
+			/* Keep restarting the timer until
+			 * the input overrun subsides.
+			 */
+			cancel_delayed_work(&up->overrun_backoff);
+		}
+
+		delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
+		schedule_delayed_work(&up->overrun_backoff, delay);
+	}
+
 	serial8250_rpm_put(up);
 
 	return IRQ_RETVAL(ret);
@@ -1353,6 +1372,10 @@ static int omap8250_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (of_property_read_u32(np, "overrun-throttle-ms",
+				 &up.overrun_backoff_time_ms) != 0)
+		up.overrun_backoff_time_ms = 0;
+
 	priv->wakeirq = irq_of_parse_and_map(np, 1);
 
 	pdata = of_device_get_match_data(&pdev->dev);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index a808c283883e..726912b16a55 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -87,7 +87,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
 
 static int
 setup_port(struct serial_private *priv, struct uart_8250_port *port,
-	   int bar, int offset, int regshift)
+	   u8 bar, unsigned int offset, int regshift)
 {
 	struct pci_dev *dev = priv->dev;
 
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index de90d681b64c..98e5ee4d0d08 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -13,6 +13,7 @@
 #include <linux/pnp.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/property.h>
 #include <linux/serial_core.h>
 #include <linux/bitops.h>
 
@@ -475,6 +476,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
 		uart.port.flags |= UPF_SHARE_IRQ;
 	uart.port.uartclk = 1843200;
+	device_property_read_u32(&dev->dev, "clock-frequency", &uart.port.uartclk);
 	uart.port.dev = &dev->dev;
 
 	line = serial8250_register_8250_port(&uart);
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1da29a219842..66374704747e 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -122,7 +122,8 @@ static const struct serial8250_config uart_config[] = {
 		.name		= "16C950/954",
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+		.rxtrig_bytes	= {16, 32, 112, 120},
 		/* UART_CAP_EFR breaks billionon CF bluetooth card. */
 		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
 	},
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index d1b3c2373fa4..71ae16de0f90 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -363,7 +363,7 @@ config SERIAL_8250_BCM2835AUX
 config SERIAL_8250_FSL
 	bool
 	depends on SERIAL_8250_CONSOLE
-	default PPC || ARM || ARM64
+	default PPC || ARM || ARM64 || COMPILE_TEST
 
 config SERIAL_8250_DW
 	tristate "Support for Synopsys DesignWare 8250 quirks"
@@ -375,7 +375,8 @@ config SERIAL_8250_DW
 
 config SERIAL_8250_EM
 	tristate "Support for Emma Mobile integrated serial port"
-	depends on SERIAL_8250 && ARM && HAVE_CLK
+	depends on SERIAL_8250 && HAVE_CLK
+	depends on ARM || COMPILE_TEST
 	help
 	  Selecting this option will add support for the integrated serial
 	  port hardware found on the Emma Mobile line of processors.
@@ -383,7 +384,8 @@ config SERIAL_8250_EM
 
 config SERIAL_8250_IOC3
 	tristate "SGI IOC3 8250 UART support"
-	depends on SGI_MFD_IOC3 && SERIAL_8250
+	depends on SERIAL_8250
+	depends on SGI_MFD_IOC3 || COMPILE_TEST
 	select SERIAL_8250_EXTENDED
 	select SERIAL_8250_SHARE_IRQ
 	help
@@ -495,7 +497,7 @@ config SERIAL_8250_MID
 config SERIAL_8250_PXA
 	tristate "PXA serial port support"
 	depends on SERIAL_8250
-	depends on ARCH_PXA || ARCH_MMP
+	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
 	help
 	  If you have a machine based on an Intel XScale PXA2xx CPU you can
 	  enable its onboard serial ports by enabling this option. The option is
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 24282ad99d85..131a6a587acd 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -959,7 +959,7 @@ config SERIAL_VT8500_CONSOLE
 
 config SERIAL_OMAP
 	tristate "OMAP serial port support"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on (ARCH_OMAP2PLUS && !SERIAL_8250_OMAP) || COMPILE_TEST
 	select SERIAL_CORE
 	help
 	  If you have a machine based on an Texas Instruments OMAP CPU you
@@ -1382,7 +1382,7 @@ config SERIAL_ST_ASC
 	select SERIAL_CORE
 	depends on ARM || COMPILE_TEST
 	help
-	  This driver is for the on-chip Asychronous Serial Controller on
+	  This driver is for the on-chip Asynchronous Serial Controller on
 	  STMicroelectronics STi SoCs.
 	  ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
 	  It support all industry standard baud rates.
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e14f3378b8a0..d361cd84ff8c 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -265,6 +265,8 @@ struct uart_amba_port {
 	unsigned int		old_cr;		/* state during shutdown */
 	unsigned int		fixed_baud;	/* vendor-set fixed baud rate */
 	char			type[12];
+	bool			rs485_tx_started;
+	unsigned int		rs485_tx_drain_interval; /* usecs */
 #ifdef CONFIG_DMA_ENGINE
 	/* DMA stuff */
 	bool			using_tx_dma;
@@ -275,6 +277,8 @@ struct uart_amba_port {
 #endif
 };
 
+static unsigned int pl011_tx_empty(struct uart_port *port);
+
 static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap,
 	unsigned int reg)
 {
@@ -1282,6 +1286,42 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
 #define pl011_dma_flush_buffer	NULL
 #endif
 
+static void pl011_rs485_tx_stop(struct uart_amba_port *uap)
+{
+	struct uart_port *port = &uap->port;
+	int i = 0;
+	u32 cr;
+
+	/* Wait until hardware tx queue is empty */
+	while (!pl011_tx_empty(port)) {
+		if (i == port->fifosize) {
+			dev_warn(port->dev,
+				 "timeout while draining hardware tx queue\n");
+			break;
+		}
+
+		udelay(uap->rs485_tx_drain_interval);
+		i++;
+	}
+
+	if (port->rs485.delay_rts_after_send)
+		mdelay(port->rs485.delay_rts_after_send);
+
+	cr = pl011_read(uap, REG_CR);
+
+	if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+		cr &= ~UART011_CR_RTS;
+	else
+		cr |= UART011_CR_RTS;
+
+	/* Disable the transmitter and reenable the transceiver */
+	cr &= ~UART011_CR_TXE;
+	cr |= UART011_CR_RXE;
+	pl011_write(cr, uap, REG_CR);
+
+	uap->rs485_tx_started = false;
+}
+
 static void pl011_stop_tx(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1290,6 +1330,9 @@ static void pl011_stop_tx(struct uart_port *port)
 	uap->im &= ~UART011_TXIM;
 	pl011_write(uap->im, uap, REG_IMSC);
 	pl011_dma_tx_stop(uap);
+
+	if ((port->rs485.flags & SER_RS485_ENABLED) && uap->rs485_tx_started)
+		pl011_rs485_tx_stop(uap);
 }
 
 static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
@@ -1380,6 +1423,32 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
 	return true;
 }
 
+static void pl011_rs485_tx_start(struct uart_amba_port *uap)
+{
+	struct uart_port *port = &uap->port;
+	u32 cr;
+
+	/* Enable transmitter */
+	cr = pl011_read(uap, REG_CR);
+	cr |= UART011_CR_TXE;
+
+	/* Disable receiver if half-duplex */
+	if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
+		cr &= ~UART011_CR_RXE;
+
+	if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
+		cr &= ~UART011_CR_RTS;
+	else
+		cr |= UART011_CR_RTS;
+
+	pl011_write(cr, uap, REG_CR);
+
+	if (port->rs485.delay_rts_before_send)
+		mdelay(port->rs485.delay_rts_before_send);
+
+	uap->rs485_tx_started = true;
+}
+
 /* Returns true if tx interrupts have to be (kept) enabled  */
 static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 {
@@ -1397,6 +1466,10 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 		return false;
 	}
 
+	if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
+	    !uap->rs485_tx_started)
+		pl011_rs485_tx_start(uap);
+
 	/* If we are using DMA mode, try to send some characters. */
 	if (pl011_dma_tx_irq(uap))
 		return true;
@@ -1542,6 +1615,9 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	    container_of(port, struct uart_amba_port, port);
 	unsigned int cr;
 
+	if (port->rs485.flags & SER_RS485_ENABLED)
+		mctrl &= ~TIOCM_RTS;
+
 	cr = pl011_read(uap, REG_CR);
 
 #define	TIOCMBIT(tiocmbit, uartbit)		\
@@ -1763,7 +1839,17 @@ static int pl011_startup(struct uart_port *port)
 
 	/* restore RTS and DTR */
 	cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
-	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+	cr |= UART01x_CR_UARTEN | UART011_CR_RXE;
+
+	if (port->rs485.flags & SER_RS485_ENABLED) {
+		if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+			cr &= ~UART011_CR_RTS;
+		else
+			cr |= UART011_CR_RTS;
+	} else {
+		cr |= UART011_CR_TXE;
+	}
+
 	pl011_write(cr, uap, REG_CR);
 
 	spin_unlock_irq(&uap->port.lock);
@@ -1864,6 +1950,9 @@ static void pl011_shutdown(struct uart_port *port)
 
 	pl011_dma_shutdown(uap);
 
+	if ((port->rs485.flags & SER_RS485_ENABLED) && uap->rs485_tx_started)
+		pl011_rs485_tx_stop(uap);
+
 	free_irq(uap->port.irq, uap);
 
 	pl011_disable_uart(uap);
@@ -1941,6 +2030,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned int lcr_h, old_cr;
 	unsigned long flags;
 	unsigned int baud, quot, clkdiv;
+	unsigned int bits;
 
 	if (uap->vendor->oversampling)
 		clkdiv = 8;
@@ -1991,6 +2081,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (uap->fifosize > 1)
 		lcr_h |= UART01x_LCRH_FEN;
 
+	bits = tty_get_frame_size(termios->c_cflag);
+
 	spin_lock_irqsave(&port->lock, flags);
 
 	/*
@@ -1998,11 +2090,21 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
+	/*
+	 * Calculate the approximated time it takes to transmit one character
+	 * with the given baud rate. We use this as the poll interval when we
+	 * wait for the tx queue to empty.
+	 */
+	uap->rs485_tx_drain_interval = (bits * 1000 * 1000) / baud;
+
 	pl011_setup_status_masks(port, termios);
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		pl011_enable_ms(port);
 
+	if (port->rs485.flags & SER_RS485_ENABLED)
+		termios->c_cflag &= ~CRTSCTS;
+
 	/* first, disable everything */
 	old_cr = pl011_read(uap, REG_CR);
 	pl011_write(0, uap, REG_CR);
@@ -2124,6 +2226,41 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return ret;
 }
 
+static int pl011_rs485_config(struct uart_port *port,
+			      struct serial_rs485 *rs485)
+{
+	struct uart_amba_port *uap =
+		container_of(port, struct uart_amba_port, port);
+
+	/* pick sane settings if the user hasn't */
+	if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+	    !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) {
+		rs485->flags |= SER_RS485_RTS_ON_SEND;
+		rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+	}
+	/* clamp the delays to [0, 100ms] */
+	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+	rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
+	memset(rs485->padding, 0, sizeof(rs485->padding));
+
+	if (port->rs485.flags & SER_RS485_ENABLED)
+		pl011_rs485_tx_stop(uap);
+
+	/* Set new configuration */
+	port->rs485 = *rs485;
+
+	/* Make sure auto RTS is disabled */
+	if (port->rs485.flags & SER_RS485_ENABLED) {
+		u32 cr = pl011_read(uap, REG_CR);
+
+		cr &= ~UART011_CR_RTSEN;
+		pl011_write(cr, uap, REG_CR);
+		port->status &= ~UPSTAT_AUTORTS;
+	}
+
+	return 0;
+}
+
 static const struct uart_ops amba_pl011_pops = {
 	.tx_empty	= pl011_tx_empty,
 	.set_mctrl	= pl011_set_mctrl,
@@ -2588,10 +2725,28 @@ static int pl011_find_free_port(void)
 	return -EBUSY;
 }
 
+static int pl011_get_rs485_mode(struct uart_amba_port *uap)
+{
+	struct uart_port *port = &uap->port;
+	struct serial_rs485 *rs485 = &port->rs485;
+	int ret;
+
+	ret = uart_get_rs485_mode(port);
+	if (ret)
+		return ret;
+
+	/* clamp the delays to [0, 100ms] */
+	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+	rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
+
+	return 0;
+}
+
 static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
 			    struct resource *mmiobase, int index)
 {
 	void __iomem *base;
+	int ret;
 
 	base = devm_ioremap_resource(dev, mmiobase);
 	if (IS_ERR(base))
@@ -2608,6 +2763,10 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = index;
 
+	ret = pl011_get_rs485_mode(uap);
+	if (ret)
+		return ret;
+
 	amba_ports[index] = uap;
 
 	return 0;
@@ -2665,7 +2824,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
 	uap->port.irq = dev->irq[0];
 	uap->port.ops = &amba_pl011_pops;
-
+	uap->port.rs485_config = pl011_rs485_config;
 	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
 
 	ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index d87048073abe..283757264608 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -861,11 +861,7 @@ static int linflex_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, sport);
 
-	ret = uart_add_one_port(&linflex_reg, sport);
-	if (ret)
-		return ret;
-
-	return 0;
+	return uart_add_one_port(&linflex_reg, sport);
 }
 
 static int linflex_remove(struct platform_device *pdev)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index f0e5da77ed6d..b1e7190ae483 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -7,6 +7,7 @@
 
 #include <linux/clk.h>
 #include <linux/console.h>
+#include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/dmapool.h>
@@ -109,6 +110,11 @@
 #define UARTSFIFO_TXOF		0x02
 #define UARTSFIFO_RXUF		0x01
 
+/* 32-bit global registers only for i.MX7ULP/i.MX8x
+ * Used to reset all internal logic and registers, except the Global Register.
+ */
+#define UART_GLOBAL		0x8
+
 /* 32-bit register definition */
 #define UARTBAUD		0x00
 #define UARTSTAT		0x04
@@ -219,6 +225,10 @@
 #define UARTWATER_TXWATER_OFF	0
 #define UARTWATER_RXWATER_OFF	16
 
+#define UART_GLOBAL_RST	0x2
+#define GLOBAL_RST_MIN_US	20
+#define GLOBAL_RST_MAX_US	40
+
 /* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */
 #define DMA_RX_TIMEOUT		(10)
 
@@ -320,6 +330,11 @@ static inline bool is_layerscape_lpuart(struct lpuart_port *sport)
 		sport->devtype == LS1028A_LPUART);
 }
 
+static inline bool is_imx7ulp_lpuart(struct lpuart_port *sport)
+{
+	return sport->devtype == IMX7ULP_LPUART;
+}
+
 static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
 {
 	return sport->devtype == IMX8QXP_LPUART;
@@ -383,6 +398,33 @@ static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport)
 #define lpuart_enable_clks(x)	__lpuart_enable_clks(x, true)
 #define lpuart_disable_clks(x)	__lpuart_enable_clks(x, false)
 
+static int lpuart_global_reset(struct lpuart_port *sport)
+{
+	struct uart_port *port = &sport->port;
+	void __iomem *global_addr;
+	int ret;
+
+	if (uart_console(port))
+		return 0;
+
+	ret = clk_prepare_enable(sport->ipg_clk);
+	if (ret) {
+		dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret);
+		return ret;
+	}
+
+	if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
+		global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF;
+		writel(UART_GLOBAL_RST, global_addr);
+		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
+		writel(0, global_addr);
+		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
+	}
+
+	clk_disable_unprepare(sport->ipg_clk);
+	return 0;
+}
+
 static void lpuart_stop_tx(struct uart_port *port)
 {
 	unsigned char temp;
@@ -479,6 +521,10 @@ static void lpuart_dma_tx_complete(void *arg)
 	unsigned long flags;
 
 	spin_lock_irqsave(&sport->port.lock, flags);
+	if (!sport->dma_tx_in_progress) {
+		spin_unlock_irqrestore(&sport->port.lock, flags);
+		return;
+	}
 
 	dma_unmap_sg(chan->device->dev, sgl, sport->dma_tx_nents,
 		     DMA_TO_DEVICE);
@@ -2045,11 +2091,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
 	unsigned long flags;
-	unsigned long ctrl, old_ctrl, modem;
+	unsigned long ctrl, old_ctrl, bd, modem;
 	unsigned int  baud;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
 
 	ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
+	bd = lpuart32_read(&sport->port, UARTBAUD);
 	modem = lpuart32_read(&sport->port, UARTMODIR);
 	/*
 	 * only support CS8 and CS7, and for CS7 must enable PE.
@@ -2093,7 +2140,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	if (termios->c_cflag & CSTOPB)
-		termios->c_cflag &= ~CSTOPB;
+		bd |= UARTBAUD_SBNS;
+	else
+		bd &= ~UARTBAUD_SBNS;
 
 	/* parity must be enabled when CS7 to match 8-bits format */
 	if ((termios->c_cflag & CSIZE) == CS7)
@@ -2163,6 +2212,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
 		       UARTCTRL);
 
+	lpuart32_write(&sport->port, bd, UARTBAUD);
 	lpuart32_serial_setbrg(sport, baud);
 	lpuart32_write(&sport->port, modem, UARTMODIR);
 	lpuart32_write(&sport->port, ctrl, UARTCTRL);
@@ -2611,7 +2661,7 @@ static int lpuart_probe(struct platform_device *pdev)
 		return PTR_ERR(sport->port.membase);
 
 	sport->port.membase += sdata->reg_off;
-	sport->port.mapbase = res->start;
+	sport->port.mapbase = res->start + sdata->reg_off;
 	sport->port.dev = &pdev->dev;
 	sport->port.type = PORT_LPUART;
 	sport->devtype = sdata->devtype;
@@ -2691,6 +2741,10 @@ static int lpuart_probe(struct platform_device *pdev)
 	if (ret)
 		goto failed_attach_port;
 
+	ret = lpuart_global_reset(sport);
+	if (ret)
+		goto failed_reset;
+
 	ret = uart_get_rs485_mode(&sport->port);
 	if (ret)
 		goto failed_get_rs485;
@@ -2707,6 +2761,8 @@ static int lpuart_probe(struct platform_device *pdev)
 	return 0;
 
 failed_get_rs485:
+failed_reset:
+	uart_remove_one_port(&lpuart_reg, &sport->port);
 failed_attach_port:
 failed_irq_request:
 	lpuart_disable_clks(sport);
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index bf0e2a4cb0ce..c6f927a76c3b 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -815,7 +815,9 @@ static void neo_parse_isr(struct jsm_board *brd, u32 port)
 		/* Parse any modem signal changes */
 		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
 			"MOD_STAT: sending to parse_modem_sigs\n");
+		spin_lock_irqsave(&ch->uart_port.lock, lock_flags);
 		neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+		spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags);
 	}
 }
 
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 8e42a7682c63..d74cbbbf33c6 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -187,6 +187,7 @@ static void jsm_tty_break(struct uart_port *port, int break_state)
 
 static int jsm_tty_open(struct uart_port *port)
 {
+	unsigned long lock_flags;
 	struct jsm_board *brd;
 	struct jsm_channel *channel =
 		container_of(port, struct jsm_channel, uart_port);
@@ -240,6 +241,7 @@ static int jsm_tty_open(struct uart_port *port)
 	channel->ch_cached_lsr = 0;
 	channel->ch_stops_sent = 0;
 
+	spin_lock_irqsave(&port->lock, lock_flags);
 	termios = &port->state->port.tty->termios;
 	channel->ch_c_cflag	= termios->c_cflag;
 	channel->ch_c_iflag	= termios->c_iflag;
@@ -259,6 +261,7 @@ static int jsm_tty_open(struct uart_port *port)
 	jsm_carrier(channel);
 
 	channel->ch_open_count++;
+	spin_unlock_irqrestore(&port->lock, lock_flags);
 
 	jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
 	return 0;
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 3e7c6ee8e4b3..55c3c9db7462 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -330,17 +330,16 @@ int kgdb_register_nmi_console(void)
 	if (!arch_kgdb_ops.enable_nmi)
 		return 0;
 
-	kgdb_nmi_tty_driver = alloc_tty_driver(1);
-	if (!kgdb_nmi_tty_driver) {
+	kgdb_nmi_tty_driver = tty_alloc_driver(1, TTY_DRIVER_REAL_RAW);
+	if (IS_ERR(kgdb_nmi_tty_driver)) {
 		pr_err("%s: cannot allocate tty\n", __func__);
-		return -ENOMEM;
+		return PTR_ERR(kgdb_nmi_tty_driver);
 	}
 	kgdb_nmi_tty_driver->driver_name	= "ttyNMI";
 	kgdb_nmi_tty_driver->name		= "ttyNMI";
 	kgdb_nmi_tty_driver->num		= 1;
 	kgdb_nmi_tty_driver->type		= TTY_DRIVER_TYPE_SERIAL;
 	kgdb_nmi_tty_driver->subtype		= SERIAL_TYPE_NORMAL;
-	kgdb_nmi_tty_driver->flags		= TTY_DRIVER_REAL_RAW;
 	kgdb_nmi_tty_driver->init_termios	= tty_std_termios;
 	tty_termios_encode_baud_rate(&kgdb_nmi_tty_driver->init_termios,
 				     KGDB_NMI_BAUD, KGDB_NMI_BAUD);
@@ -356,7 +355,7 @@ int kgdb_register_nmi_console(void)
 
 	return 0;
 err_drv_reg:
-	put_tty_driver(kgdb_nmi_tty_driver);
+	tty_driver_kref_put(kgdb_nmi_tty_driver);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(kgdb_register_nmi_console);
@@ -374,7 +373,7 @@ int kgdb_unregister_nmi_console(void)
 		return ret;
 
 	tty_unregister_driver(kgdb_nmi_tty_driver);
-	put_tty_driver(kgdb_nmi_tty_driver);
+	tty_driver_kref_put(kgdb_nmi_tty_driver);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index ef11860cd69e..3df0788ddeb0 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1271,18 +1271,13 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 	/* Always ask for fixed clock rate from a property. */
 	device_property_read_u32(dev, "clock-frequency", &uartclk);
 
-	s->clk = devm_clk_get_optional(dev, "osc");
+	xtal = device_property_match_string(dev, "clock-names", "osc") < 0;
+	if (xtal)
+		s->clk = devm_clk_get_optional(dev, "xtal");
+	else
+		s->clk = devm_clk_get_optional(dev, "osc");
 	if (IS_ERR(s->clk))
 		return PTR_ERR(s->clk);
-	if (s->clk) {
-		xtal = false;
-	} else {
-		s->clk = devm_clk_get_optional(dev, "xtal");
-		if (IS_ERR(s->clk))
-			return PTR_ERR(s->clk);
-
-		xtal = true;
-	}
 
 	ret = clk_prepare_enable(s->clk);
 	if (ret)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 9e81b09ba08e..0862941862c8 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -276,11 +276,8 @@ static void serial_omap_enable_ms(struct uart_port *port)
 
 	dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
 
-	pm_runtime_get_sync(up->dev);
 	up->ier |= UART_IER_MSI;
 	serial_out(up, UART_IER, up->ier);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_tx(struct uart_port *port)
@@ -288,8 +285,6 @@ static void serial_omap_stop_tx(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	int res;
 
-	pm_runtime_get_sync(up->dev);
-
 	/* Handle RS-485 */
 	if (port->rs485.flags & SER_RS485_ENABLED) {
 		if (up->scr & OMAP_UART_SCR_TX_EMPTY) {
@@ -330,21 +325,15 @@ static void serial_omap_stop_tx(struct uart_port *port)
 		up->ier &= ~UART_IER_THRI;
 		serial_out(up, UART_IER, up->ier);
 	}
-
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_rx(struct uart_port *port)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
 
-	pm_runtime_get_sync(up->dev);
 	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	up->port.read_status_mask &= ~UART_LSR_DR;
 	serial_out(up, UART_IER, up->ier);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
@@ -399,8 +388,6 @@ static void serial_omap_start_tx(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	int res;
 
-	pm_runtime_get_sync(up->dev);
-
 	/* Handle RS-485 */
 	if (port->rs485.flags & SER_RS485_ENABLED) {
 		/* Fire THR interrupts when FIFO is below trigger level */
@@ -421,8 +408,6 @@ static void serial_omap_start_tx(struct uart_port *port)
 		up->rs485_tx_filter_count = 0;
 
 	serial_omap_enable_ier_thri(up);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_throttle(struct uart_port *port)
@@ -430,13 +415,10 @@ static void serial_omap_throttle(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned long flags;
 
-	pm_runtime_get_sync(up->dev);
 	spin_lock_irqsave(&up->port.lock, flags);
 	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	serial_out(up, UART_IER, up->ier);
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_unthrottle(struct uart_port *port)
@@ -444,13 +426,10 @@ static void serial_omap_unthrottle(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned long flags;
 
-	pm_runtime_get_sync(up->dev);
 	spin_lock_irqsave(&up->port.lock, flags);
 	up->ier |= UART_IER_RLSI | UART_IER_RDI;
 	serial_out(up, UART_IER, up->ier);
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static unsigned int check_modem_status(struct uart_omap_port *up)
@@ -576,7 +555,6 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
 	int max_count = 256;
 
 	spin_lock(&up->port.lock);
-	pm_runtime_get_sync(up->dev);
 
 	do {
 		iir = serial_in(up, UART_IIR);
@@ -616,8 +594,6 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
 
 	tty_flip_buffer_push(&up->port.state->port);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 	up->port_activity = jiffies;
 
 	return ret;
@@ -629,13 +605,11 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
 	unsigned long flags;
 	unsigned int ret = 0;
 
-	pm_runtime_get_sync(up->dev);
 	dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
 	spin_lock_irqsave(&up->port.lock, flags);
 	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+
 	return ret;
 }
 
@@ -645,10 +619,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
 	unsigned int status;
 	unsigned int ret = 0;
 
-	pm_runtime_get_sync(up->dev);
 	status = check_modem_status(up);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 
 	dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
 
@@ -680,7 +651,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	if (mctrl & TIOCM_LOOP)
 		mcr |= UART_MCR_LOOP;
 
-	pm_runtime_get_sync(up->dev);
 	old_mcr = serial_in(up, UART_MCR);
 	old_mcr &= ~(UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_OUT1 |
 		     UART_MCR_DTR | UART_MCR_RTS);
@@ -696,9 +666,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		up->efr &= ~UART_EFR_RTS;
 	serial_out(up, UART_EFR, up->efr);
 	serial_out(up, UART_LCR, lcr);
-
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -707,7 +674,6 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 	unsigned long flags;
 
 	dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
-	pm_runtime_get_sync(up->dev);
 	spin_lock_irqsave(&up->port.lock, flags);
 	if (break_state == -1)
 		up->lcr |= UART_LCR_SBC;
@@ -715,8 +681,6 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 		up->lcr &= ~UART_LCR_SBC;
 	serial_out(up, UART_LCR, up->lcr);
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static int serial_omap_startup(struct uart_port *port)
@@ -788,8 +752,6 @@ static int serial_omap_startup(struct uart_port *port)
 
 	serial_out(up, UART_OMAP_WER, up->wer);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 	up->port_activity = jiffies;
 	return 0;
 }
@@ -801,7 +763,6 @@ static void serial_omap_shutdown(struct uart_port *port)
 
 	dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
 
-	pm_runtime_get_sync(up->dev);
 	/*
 	 * Disable interrupts from this port
 	 */
@@ -825,8 +786,7 @@ static void serial_omap_shutdown(struct uart_port *port)
 	if (serial_in(up, UART_LSR) & UART_LSR_DR)
 		(void) serial_in(up, UART_RX);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_put_sync(up->dev);
 	free_irq(up->port.irq, up);
 	dev_pm_clear_wake_irq(up->dev);
 }
@@ -896,7 +856,6 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * Ok, we're now changing the port state. Do it with
 	 * interrupts disabled.
 	 */
-	pm_runtime_get_sync(up->dev);
 	spin_lock_irqsave(&up->port.lock, flags);
 
 	/*
@@ -1096,8 +1055,6 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	serial_omap_set_mctrl(&up->port, up->port.mctrl);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
@@ -1110,7 +1067,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 
 	dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
 
-	pm_runtime_get_sync(up->dev);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	efr = serial_in(up, UART_EFR);
 	serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@@ -1120,9 +1076,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
-
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
@@ -1202,11 +1155,8 @@ static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
 
-	pm_runtime_get_sync(up->dev);
 	wait_for_xmitr(up);
 	serial_out(up, UART_TX, ch);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 }
 
 static int serial_omap_poll_get_char(struct uart_port *port)
@@ -1214,7 +1164,6 @@ static int serial_omap_poll_get_char(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned int status;
 
-	pm_runtime_get_sync(up->dev);
 	status = serial_in(up, UART_LSR);
 	if (!(status & UART_LSR_DR)) {
 		status = NO_POLL_CHAR;
@@ -1224,9 +1173,6 @@ static int serial_omap_poll_get_char(struct uart_port *port)
 	status = serial_in(up, UART_RX);
 
 out:
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
-
 	return status;
 }
 
@@ -1309,8 +1255,6 @@ serial_omap_console_write(struct console *co, const char *s,
 	unsigned int ier;
 	int locked = 1;
 
-	pm_runtime_get_sync(up->dev);
-
 	local_irq_save(flags);
 	if (up->port.sysrq)
 		locked = 0;
@@ -1343,8 +1287,6 @@ serial_omap_console_write(struct console *co, const char *s,
 	if (up->msr_saved_flags)
 		check_modem_status(up);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 	if (locked)
 		spin_unlock(&up->port.lock);
 	local_irq_restore(flags);
@@ -1403,8 +1345,6 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
 	unsigned int mode;
 	int val;
 
-	pm_runtime_get_sync(up->dev);
-
 	/* Disable interrupts from this port */
 	mode = up->ier;
 	up->ier = 0;
@@ -1438,9 +1378,6 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
 		serial_out(up, UART_OMAP_SCR, up->scr);
 	}
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
-
 	return 0;
 }
 
@@ -1737,11 +1674,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 		omap_up_info->autosuspend_timeout = -1;
 
 	device_init_wakeup(up->dev, true);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_set_autosuspend_delay(&pdev->dev,
-			omap_up_info->autosuspend_timeout);
 
-	pm_runtime_irq_safe(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	pm_runtime_get_sync(&pdev->dev);
@@ -1755,12 +1688,9 @@ static int serial_omap_probe(struct platform_device *pdev)
 	if (ret != 0)
 		goto err_add_port;
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
 	return 0;
 
 err_add_port:
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	cpu_latency_qos_remove_request(&up->pm_qos_request);
@@ -1778,7 +1708,6 @@ static int serial_omap_remove(struct platform_device *dev)
 
 	uart_remove_one_port(&serial_omap_reg, &up->port);
 
-	pm_runtime_dont_use_autosuspend(up->dev);
 	pm_runtime_put_sync(up->dev);
 	pm_runtime_disable(up->dev);
 	cpu_latency_qos_remove_request(&up->pm_qos_request);
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 9fbc61151c2e..e2f49863e9c2 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -65,6 +65,7 @@ enum s3c24xx_port_type {
 struct s3c24xx_uart_info {
 	char			*name;
 	enum s3c24xx_port_type	type;
+	unsigned int		has_usi;
 	unsigned int		port_type;
 	unsigned int		fifosize;
 	unsigned long		rx_fifomask;
@@ -305,8 +306,9 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 		dmaengine_pause(dma->tx_chan);
 		dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
 		dmaengine_terminate_all(dma->tx_chan);
-		dma_sync_single_for_cpu(ourport->port.dev,
-			dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE);
+		dma_sync_single_for_cpu(dma->tx_chan->device->dev,
+					dma->tx_transfer_addr, dma->tx_size,
+					DMA_TO_DEVICE);
 		async_tx_ack(dma->tx_desc);
 		count = dma->tx_bytes_requested - state.residue;
 		xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
@@ -338,8 +340,9 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
 	count = dma->tx_bytes_requested - state.residue;
 	async_tx_ack(dma->tx_desc);
 
-	dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr,
-				dma->tx_size, DMA_TO_DEVICE);
+	dma_sync_single_for_cpu(dma->tx_chan->device->dev,
+				dma->tx_transfer_addr, dma->tx_size,
+				DMA_TO_DEVICE);
 
 	spin_lock_irqsave(&port->lock, flags);
 
@@ -443,8 +446,9 @@ static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
 	dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
 	dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
 
-	dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr,
-				dma->tx_size, DMA_TO_DEVICE);
+	dma_sync_single_for_device(dma->tx_chan->device->dev,
+				   dma->tx_transfer_addr, dma->tx_size,
+				   DMA_TO_DEVICE);
 
 	dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
 				dma->tx_transfer_addr, dma->tx_size,
@@ -515,7 +519,7 @@ static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
 	if (!count)
 		return;
 
-	dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr,
+	dma_sync_single_for_cpu(dma->rx_chan->device->dev, dma->rx_addr,
 				dma->rx_size, DMA_FROM_DEVICE);
 
 	ourport->port.icount.rx += count;
@@ -636,8 +640,8 @@ static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
 {
 	struct s3c24xx_uart_dma *dma = ourport->dma;
 
-	dma_sync_single_for_device(ourport->port.dev, dma->rx_addr,
-				dma->rx_size, DMA_FROM_DEVICE);
+	dma_sync_single_for_device(dma->rx_chan->device->dev, dma->rx_addr,
+				   dma->rx_size, DMA_FROM_DEVICE);
 
 	dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
 				dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
@@ -1102,18 +1106,19 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 		goto err_release_tx;
 	}
 
-	dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
-				dma->rx_size, DMA_FROM_DEVICE);
-	if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
+	dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
+				      dma->rx_size, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dma->rx_chan->device->dev, dma->rx_addr)) {
 		reason = "DMA mapping error for RX buffer";
 		ret = -EIO;
 		goto err_free_rx;
 	}
 
 	/* TX buffer */
-	dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
-				UART_XMIT_SIZE, DMA_TO_DEVICE);
-	if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
+	dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
+				      p->port.state->xmit.buf, UART_XMIT_SIZE,
+				      DMA_TO_DEVICE);
+	if (dma_mapping_error(dma->tx_chan->device->dev, dma->tx_addr)) {
 		reason = "DMA mapping error for TX buffer";
 		ret = -EIO;
 		goto err_unmap_rx;
@@ -1122,8 +1127,8 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 	return 0;
 
 err_unmap_rx:
-	dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size,
-			 DMA_FROM_DEVICE);
+	dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+			 dma->rx_size, DMA_FROM_DEVICE);
 err_free_rx:
 	kfree(dma->rx_buf);
 err_release_tx:
@@ -1142,8 +1147,8 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
 
 	if (dma->rx_chan) {
 		dmaengine_terminate_all(dma->rx_chan);
-		dma_unmap_single(p->port.dev, dma->rx_addr,
-				dma->rx_size, DMA_FROM_DEVICE);
+		dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+				 dma->rx_size, DMA_FROM_DEVICE);
 		kfree(dma->rx_buf);
 		dma_release_channel(dma->rx_chan);
 		dma->rx_chan = NULL;
@@ -1151,8 +1156,8 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
 
 	if (dma->tx_chan) {
 		dmaengine_terminate_all(dma->tx_chan);
-		dma_unmap_single(p->port.dev, dma->tx_addr,
-				UART_XMIT_SIZE, DMA_TO_DEVICE);
+		dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
+				 UART_XMIT_SIZE, DMA_TO_DEVICE);
 		dma_release_channel(dma->tx_chan);
 		dma->tx_chan = NULL;
 	}
@@ -1352,6 +1357,28 @@ static int apple_s5l_serial_startup(struct uart_port *port)
 	return ret;
 }
 
+static void exynos_usi_init(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	struct s3c24xx_uart_info *info = ourport->info;
+	unsigned int val;
+
+	if (!info->has_usi)
+		return;
+
+	/* Clear the software reset of USI block (it's set at startup) */
+	val = rd_regl(port, USI_CON);
+	val &= ~USI_CON_RESET_MASK;
+	wr_regl(port, USI_CON, val);
+	udelay(1);
+
+	/* Continuously provide the clock to USI IP w/o gating (for Rx mode) */
+	val = rd_regl(port, USI_OPTION);
+	val &= ~USI_OPTION_HWACG_MASK;
+	val |= USI_OPTION_HWACG_CLKREQ_ON;
+	wr_regl(port, USI_OPTION, val);
+}
+
 /* power power management control */
 
 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
@@ -1379,6 +1406,7 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 		if (!IS_ERR(ourport->baudclk))
 			clk_prepare_enable(ourport->baudclk);
 
+		exynos_usi_init(port);
 		break;
 	default:
 		dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
@@ -2102,6 +2130,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	if (ret)
 		pr_warn("uart: failed to enable baudclk\n");
 
+	exynos_usi_init(port);
+
 	/* Keep all interrupts masked and cleared */
 	switch (ourport->info->type) {
 	case TYPE_S3C6400:
@@ -2750,10 +2780,11 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 #endif
 
 #if defined(CONFIG_ARCH_EXYNOS)
-#define EXYNOS_COMMON_SERIAL_DRV_DATA				\
+#define EXYNOS_COMMON_SERIAL_DRV_DATA_USI(_has_usi)		\
 	.info = &(struct s3c24xx_uart_info) {			\
 		.name		= "Samsung Exynos UART",	\
 		.type		= TYPE_S3C6400,			\
+		.has_usi	= _has_usi,			\
 		.port_type	= PORT_S3C6400,			\
 		.has_divslot	= 1,				\
 		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
@@ -2773,6 +2804,9 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 		.has_fracval	= 1,				\
 	}							\
 
+#define EXYNOS_COMMON_SERIAL_DRV_DATA				\
+	EXYNOS_COMMON_SERIAL_DRV_DATA_USI(0)
+
 static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
 	EXYNOS_COMMON_SERIAL_DRV_DATA,
 	.fifosize = { 256, 64, 16, 16 },
@@ -2783,11 +2817,19 @@ static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
 	.fifosize = { 64, 256, 16, 256 },
 };
 
+static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
+	EXYNOS_COMMON_SERIAL_DRV_DATA_USI(1),
+	.fifosize = { 256, 64, 64, 64 },
+};
+
 #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
 #define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
+#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos850_serial_drv_data)
+
 #else
-#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
-#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
 #endif
 
 #ifdef CONFIG_ARCH_APPLE
@@ -2843,6 +2885,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	}, {
 		.name		= "s5l-uart",
 		.driver_data	= S5L_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos850-uart",
+		.driver_data	= EXYNOS850_SERIAL_DRV_DATA,
 	},
 	{ },
 };
@@ -2866,6 +2911,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
 		.data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
 	{ .compatible = "apple,s5l-uart",
 		.data = (void *)S5L_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,exynos850-uart",
+		.data = (void *)EXYNOS850_SERIAL_DRV_DATA },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index eba5b9ecba34..45e2e4109acd 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1568,14 +1568,12 @@ static int tegra_uart_probe(struct platform_device *pdev)
 	struct resource *resource;
 	int ret;
 	const struct tegra_uart_chip_data *cdata;
-	const struct of_device_id *match;
 
-	match = of_match_device(tegra_uart_of_match, &pdev->dev);
-	if (!match) {
+	cdata = of_device_get_match_data(&pdev->dev);
+	if (!cdata) {
 		dev_err(&pdev->dev, "Error: No device match found\n");
 		return -ENODEV;
 	}
-	cdata = match->data;
 
 	tup = devm_kzalloc(&pdev->dev, sizeof(*tup), GFP_KERNEL);
 	if (!tup) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 69092deba11f..0e2e35ab64c7 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2314,6 +2314,14 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	       port->dev ? ": " : "",
 	       port->name,
 	       address, port->irq, port->uartclk / 16, uart_type(port));
+
+	/* The magic multiplier feature is a bit obscure, so report it too.  */
+	if (port->flags & UPF_MAGIC_MULTIPLIER)
+		pr_info("%s%s%s extra baud rates supported: %d, %d",
+			port->dev ? dev_name(port->dev) : "",
+			port->dev ? ": " : "",
+			port->name,
+			port->uartclk / 8, port->uartclk / 4);
 }
 
 static void
@@ -2522,9 +2530,12 @@ int uart_register_driver(struct uart_driver *drv)
 	if (!drv->state)
 		goto out;
 
-	normal = alloc_tty_driver(drv->nr);
-	if (!normal)
+	normal = tty_alloc_driver(drv->nr, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(normal)) {
+		retval = PTR_ERR(normal);
 		goto out_kfree;
+	}
 
 	drv->tty_driver = normal;
 
@@ -2537,7 +2548,6 @@ int uart_register_driver(struct uart_driver *drv)
 	normal->init_termios	= tty_std_termios;
 	normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600;
-	normal->flags		= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	normal->driver_state    = drv;
 	tty_set_operations(normal, &uart_ops);
 
@@ -2558,7 +2568,7 @@ int uart_register_driver(struct uart_driver *drv)
 
 	for (i = 0; i < drv->nr; i++)
 		tty_port_destroy(&drv->state[i].port);
-	put_tty_driver(normal);
+	tty_driver_kref_put(normal);
 out_kfree:
 	kfree(drv->state);
 out:
@@ -2580,7 +2590,7 @@ void uart_unregister_driver(struct uart_driver *drv)
 	unsigned int i;
 
 	tty_unregister_driver(p);
-	put_tty_driver(p);
+	tty_driver_kref_put(p);
 	for (i = 0; i < drv->nr; i++)
 		tty_port_destroy(&drv->state[i].port);
 	kfree(drv->state);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 07eb56294371..89ee43061d3a 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1758,6 +1758,10 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 
 	/* Handle BREAKs */
 	sci_handle_breaks(port);
+
+	/* drop invalid character received before break was detected */
+	serial_port_in(port, SCxRDR);
+
 	sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
 
 	return IRQ_HANDLED;
@@ -1837,7 +1841,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 		ret = sci_er_interrupt(irq, ptr);
 
 	/* Break Interrupt */
-	if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
+	if (s->irqs[SCIx_ERI_IRQ] != s->irqs[SCIx_BRI_IRQ] &&
+	    (ssr_status & SCxSR_BRK(port)) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
 	/* Overrun Interrupt */
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index ef793b3b4591..8f032e77b954 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1034,8 +1034,8 @@ static int stm32_usart_init_port(struct stm32_port *stm32port,
 	int ret, irq;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0)
-		return irq ? : -ENODEV;
+	if (irq < 0)
+		return irq;
 
 	port->iotype	= UPIO_MEM;
 	port->flags	= UPF_BOOT_AUTOCONF;
@@ -1064,8 +1064,7 @@ static int stm32_usart_init_port(struct stm32_port *stm32port,
 				      &stm32port->txftcfg);
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	port->membase = devm_ioremap_resource(&pdev->dev, res);
+	port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(port->membase))
 		return PTR_ERR(port->membase);
 	port->mapbase = res->start;
@@ -1177,7 +1176,7 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port,
 	if (uart_console(port))
 		return -ENODEV;
 
-	stm32port->rx_buf = dma_alloc_coherent(&pdev->dev, RX_BUF_L,
+	stm32port->rx_buf = dma_alloc_coherent(dev, RX_BUF_L,
 					       &stm32port->rx_dma_buf,
 					       GFP_KERNEL);
 	if (!stm32port->rx_buf)
@@ -1243,7 +1242,7 @@ static int stm32_usart_of_dma_tx_probe(struct stm32_port *stm32port,
 
 	stm32port->tx_dma_busy = false;
 
-	stm32port->tx_buf = dma_alloc_coherent(&pdev->dev, TX_BUF_L,
+	stm32port->tx_buf = dma_alloc_coherent(dev, TX_BUF_L,
 					       &stm32port->tx_dma_buf,
 					       GFP_KERNEL);
 	if (!stm32port->tx_buf)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index a5f15f22d9ef..dfc1ba4e1572 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -17,11 +17,13 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
+#include <linux/pm_runtime.h>
 
 #define ULITE_NAME		"ttyUL"
 #define ULITE_MAJOR		204
@@ -54,6 +56,7 @@
 #define ULITE_CONTROL_RST_TX	0x01
 #define ULITE_CONTROL_RST_RX	0x02
 #define ULITE_CONTROL_IE	0x10
+#define UART_AUTOSUSPEND_TIMEOUT	3000	/* ms */
 
 /* Static pointer to console port */
 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
@@ -390,12 +393,16 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
 static void ulite_pm(struct uart_port *port, unsigned int state,
 		     unsigned int oldstate)
 {
-	struct uartlite_data *pdata = port->private_data;
+	int ret;
 
-	if (!state)
-		clk_enable(pdata->clk);
-	else
-		clk_disable(pdata->clk);
+	if (!state) {
+		ret = pm_runtime_get_sync(port->dev);
+		if (ret < 0)
+			dev_err(port->dev, "Failed to enable clocks\n");
+	} else {
+		pm_runtime_mark_last_busy(port->dev);
+		pm_runtime_put_autosuspend(port->dev);
+	}
 }
 
 #ifdef CONFIG_CONSOLE_POLL
@@ -448,24 +455,15 @@ static const struct uart_ops ulite_ops = {
 static void ulite_console_wait_tx(struct uart_port *port)
 {
 	u8 val;
-	unsigned long timeout;
 
 	/*
 	 * Spin waiting for TX fifo to have space available.
 	 * When using the Microblaze Debug Module this can take up to 1s
 	 */
-	timeout = jiffies + msecs_to_jiffies(1000);
-	while (1) {
-		val = uart_in32(ULITE_STATUS, port);
-		if ((val & ULITE_STATUS_TXFULL) == 0)
-			break;
-		if (time_after(jiffies, timeout)) {
-			dev_warn(port->dev,
-				 "timeout waiting for TX buffer empty\n");
-			break;
-		}
-		cpu_relax();
-	}
+	if (read_poll_timeout_atomic(uart_in32, val, !(val & ULITE_STATUS_TXFULL),
+				     0, 1000000, false, ULITE_STATUS, port))
+		dev_warn(port->dev,
+			 "timeout waiting for TX buffer empty\n");
 }
 
 static void ulite_console_putchar(struct uart_port *port, int ch)
@@ -555,16 +553,15 @@ static void early_uartlite_putc(struct uart_port *port, int c)
 	 * This limit is pretty arbitrary, unless we are at about 10 baud
 	 * we'll never timeout on a working UART.
 	 */
-
 	unsigned retries = 1000000;
-	/* read status bit - 0x8 offset */
-	while (--retries && (readl(port->membase + 8) & (1 << 3)))
+
+	while (--retries &&
+	       (readl(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL))
 		;
 
 	/* Only attempt the iowrite if we didn't timeout */
-	/* write to TX_FIFO - 0x4 offset */
 	if (retries)
-		writel(c & 0xff, port->membase + 4);
+		writel(c & 0xff, port->membase + ULITE_TX);
 }
 
 static void early_uartlite_write(struct console *console,
@@ -719,11 +716,38 @@ static int __maybe_unused ulite_resume(struct device *dev)
 	return 0;
 }
 
+static int __maybe_unused ulite_runtime_suspend(struct device *dev)
+{
+	struct uart_port *port = dev_get_drvdata(dev);
+	struct uartlite_data *pdata = port->private_data;
+
+	clk_disable(pdata->clk);
+	return 0;
+};
+
+static int __maybe_unused ulite_runtime_resume(struct device *dev)
+{
+	struct uart_port *port = dev_get_drvdata(dev);
+	struct uartlite_data *pdata = port->private_data;
+	int ret;
+
+	ret = clk_enable(pdata->clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable clock.\n");
+		return ret;
+	}
+	return 0;
+}
+
 /* ---------------------------------------------------------------------
  * Platform bus binding
  */
 
-static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume);
+static const struct dev_pm_ops ulite_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ulite_suspend, ulite_resume)
+	SET_RUNTIME_PM_OPS(ulite_runtime_suspend,
+			   ulite_runtime_resume, NULL)
+};
 
 #if defined(CONFIG_OF)
 /* Match table for of_platform binding */
@@ -779,18 +803,25 @@ static int ulite_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	if (!ulite_uart_driver.state) {
 		dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
 		ret = uart_register_driver(&ulite_uart_driver);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Failed to register driver\n");
+			clk_disable_unprepare(pdata->clk);
 			return ret;
 		}
 	}
 
 	ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
 
-	clk_disable(pdata->clk);
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
 
 	return ret;
 }
@@ -799,9 +830,14 @@ static int ulite_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = dev_get_drvdata(&pdev->dev);
 	struct uartlite_data *pdata = port->private_data;
+	int rc;
 
 	clk_disable_unprepare(pdata->clk);
-	return ulite_release(&pdev->dev);
+	rc = ulite_release(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	return rc;
 }
 
 /* work with hotplug and coldplug */
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index c5edd56ff830..e15b2bf69904 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -623,17 +623,14 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	struct vt8500_port *vt8500_port;
 	struct resource *mmres, *irqres;
 	struct device_node *np = pdev->dev.of_node;
-	const struct of_device_id *match;
 	const unsigned int *flags;
 	int ret;
 	int port;
 
-	match = of_match_device(wmt_dt_ids, &pdev->dev);
-	if (!match)
+	flags = of_device_get_match_data(&pdev->dev);
+	if (!flags)
 		return -EINVAL;
 
-	flags = match->data;
-
 	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!mmres || !irqres)
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 3e3b8873fa29..a9acd93e85b7 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3647,7 +3647,7 @@ static void slgt_cleanup(void)
 		for (info=slgt_device_list ; info != NULL ; info=info->next_device)
 			tty_unregister_device(serial_driver, info->line);
 		tty_unregister_driver(serial_driver);
-		put_tty_driver(serial_driver);
+		tty_driver_kref_put(serial_driver);
 	}
 
 	/* reset devices */
@@ -3686,10 +3686,11 @@ static int __init slgt_init(void)
 
 	printk(KERN_INFO "%s\n", driver_name);
 
-	serial_driver = alloc_tty_driver(MAX_DEVICES);
-	if (!serial_driver) {
+	serial_driver = tty_alloc_driver(MAX_DEVICES, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(serial_driver)) {
 		printk("%s can't allocate tty driver\n", driver_name);
-		return -ENOMEM;
+		return PTR_ERR(serial_driver);
 	}
 
 	/* Initialize the tty_driver structure */
@@ -3705,11 +3706,10 @@ static int __init slgt_init(void)
 		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	serial_driver->init_termios.c_ispeed = 9600;
 	serial_driver->init_termios.c_ospeed = 9600;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	tty_set_operations(serial_driver, &ops);
 	if ((rc = tty_register_driver(serial_driver)) < 0) {
 		DBGERR(("%s can't register serial driver\n", driver_name));
-		put_tty_driver(serial_driver);
+		tty_driver_kref_put(serial_driver);
 		serial_driver = NULL;
 		goto error;
 	}
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 6628792431dc..c911196ac893 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -258,7 +258,7 @@ static void sysrq_handle_showallcpus(int key)
 	if (!trigger_all_cpu_backtrace()) {
 		struct pt_regs *regs = NULL;
 
-		if (in_irq())
+		if (in_hardirq())
 			regs = get_irq_regs();
 		if (regs) {
 			pr_info("CPU%d:\n", smp_processor_id());
@@ -280,7 +280,7 @@ static void sysrq_handle_showregs(int key)
 {
 	struct pt_regs *regs = NULL;
 
-	if (in_irq())
+	if (in_hardirq())
 		regs = get_irq_regs();
 	if (regs)
 		show_regs(regs);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 26debec26b4e..6616d4a0d41d 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2290,8 +2290,6 @@ static int tty_fasync(int fd, struct file *filp, int on)
  *	Locking:
  *		Called functions take tty_ldiscs_lock
  *		current->signal->tty check is safe without locks
- *
- *	FIXME: may race normal receive processing
  */
 
 static int tiocsti(struct tty_struct *tty, char __user *p)
@@ -2307,8 +2305,10 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
 	ld = tty_ldisc_ref_wait(tty);
 	if (!ld)
 		return -EIO;
+	tty_buffer_lock_exclusive(tty->port);
 	if (ld->ops->receive_buf)
 		ld->ops->receive_buf(tty, &ch, &mbz, 1);
+	tty_buffer_unlock_exclusive(tty->port);
 	tty_ldisc_deref(ld);
 	return 0;
 }
@@ -3438,19 +3438,6 @@ void tty_driver_kref_put(struct tty_driver *driver)
 }
 EXPORT_SYMBOL(tty_driver_kref_put);
 
-void tty_set_operations(struct tty_driver *driver,
-			const struct tty_operations *op)
-{
-	driver->ops = op;
-};
-EXPORT_SYMBOL(tty_set_operations);
-
-void put_tty_driver(struct tty_driver *d)
-{
-	tty_driver_kref_put(d);
-}
-EXPORT_SYMBOL(put_tty_driver);
-
 /*
  * Called by a tty driver to register itself.
  */
diff --git a/drivers/tty/ttynull.c b/drivers/tty/ttynull.c
index af3311a24917..1d4438472442 100644
--- a/drivers/tty/ttynull.c
+++ b/drivers/tty/ttynull.c
@@ -84,7 +84,7 @@ static int __init ttynull_init(void)
 
 	ret = tty_register_driver(driver);
 	if (ret < 0) {
-		put_tty_driver(driver);
+		tty_driver_kref_put(driver);
 		tty_port_destroy(&ttynull_port);
 		return ret;
 	}
@@ -99,7 +99,7 @@ static void __exit ttynull_exit(void)
 {
 	unregister_console(&ttynull_console);
 	tty_unregister_driver(ttynull_driver);
-	put_tty_driver(ttynull_driver);
+	tty_driver_kref_put(ttynull_driver);
 	tty_port_destroy(&ttynull_port);
 }
 
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index d06bcc3b4c07..e11383ae1e7e 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -1028,7 +1028,7 @@ static int vcc_tty_init(void)
 	rv = tty_register_driver(vcc_tty_driver);
 	if (rv) {
 		pr_err("VCC: TTY driver registration failed\n");
-		put_tty_driver(vcc_tty_driver);
+		tty_driver_kref_put(vcc_tty_driver);
 		vcc_tty_driver = NULL;
 		return rv;
 	}
@@ -1041,7 +1041,7 @@ static int vcc_tty_init(void)
 static void vcc_tty_exit(void)
 {
 	tty_unregister_driver(vcc_tty_driver);
-	put_tty_driver(vcc_tty_driver);
+	tty_driver_kref_put(vcc_tty_driver);
 	vccdbg("VCC: TTY driver unregistered\n");
 
 	vcc_tty_driver = NULL;
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 4b0d69042ceb..c7fbbcdcc346 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1171,9 +1171,9 @@ static inline unsigned char getleds(void)
  *
  *	Check the status of a keyboard led flag and report it back
  */
-int vt_get_leds(int console, int flag)
+int vt_get_leds(unsigned int console, int flag)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	int ret;
 	unsigned long flags;
 
@@ -1193,9 +1193,9 @@ EXPORT_SYMBOL_GPL(vt_get_leds);
  *	Set the LEDs on a console. This is a wrapper for the VT layer
  *	so that we can keep kbd knowledge internal
  */
-void vt_set_led_state(int console, int leds)
+void vt_set_led_state(unsigned int console, int leds)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	setledstate(kb, leds);
 }
 
@@ -1212,9 +1212,9 @@ void vt_set_led_state(int console, int leds)
  *	don't hold the lock. We probably need to split out an LED lock
  *	but not during an -rc release!
  */
-void vt_kbd_con_start(int console)
+void vt_kbd_con_start(unsigned int console)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	unsigned long flags;
 	spin_lock_irqsave(&led_lock, flags);
 	clr_vc_kbd_led(kb, VC_SCROLLOCK);
@@ -1229,9 +1229,9 @@ void vt_kbd_con_start(int console)
  *	Handle console stop. This is a wrapper for the VT layer
  *	so that we can keep kbd knowledge internal
  */
-void vt_kbd_con_stop(int console)
+void vt_kbd_con_stop(unsigned int console)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	unsigned long flags;
 	spin_lock_irqsave(&led_lock, flags);
 	set_vc_kbd_led(kb, VC_SCROLLOCK);
@@ -1377,7 +1377,7 @@ static void kbd_rawcode(unsigned char data)
 {
 	struct vc_data *vc = vc_cons[fg_console].d;
 
-	kbd = kbd_table + vc->vc_num;
+	kbd = &kbd_table[vc->vc_num];
 	if (kbd->kbdmode == VC_RAW)
 		put_queue(vc, data);
 }
@@ -1400,7 +1400,7 @@ static void kbd_keycode(unsigned int keycode, int down, bool hw_raw)
 		tty->driver_data = vc;
 	}
 
-	kbd = kbd_table + vc->vc_num;
+	kbd = &kbd_table[vc->vc_num];
 
 #ifdef CONFIG_SPARC
 	if (keycode == KEY_STOP)
@@ -1825,9 +1825,9 @@ int vt_do_diacrit(unsigned int cmd, void __user *udp, int perm)
  *	Update the keyboard mode bits while holding the correct locks.
  *	Return 0 for success or an error code.
  */
-int vt_do_kdskbmode(int console, unsigned int arg)
+int vt_do_kdskbmode(unsigned int console, unsigned int arg)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	int ret = 0;
 	unsigned long flags;
 
@@ -1865,9 +1865,9 @@ int vt_do_kdskbmode(int console, unsigned int arg)
  *	Update the keyboard meta bits while holding the correct locks.
  *	Return 0 for success or an error code.
  */
-int vt_do_kdskbmeta(int console, unsigned int arg)
+int vt_do_kdskbmeta(unsigned int console, unsigned int arg)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	int ret = 0;
 	unsigned long flags;
 
@@ -2008,9 +2008,9 @@ out:
 }
 
 int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm,
-						int console)
+						unsigned int console)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	struct kbentry kbe;
 
 	if (copy_from_user(&kbe, user_kbe, sizeof(struct kbentry)))
@@ -2097,9 +2097,9 @@ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm)
 	return ret;
 }
 
-int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm)
+int vt_do_kdskled(unsigned int console, int cmd, unsigned long arg, int perm)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
         unsigned long flags;
 	unsigned char ucval;
 
@@ -2139,9 +2139,9 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm)
         return -ENOIOCTLCMD;
 }
 
-int vt_do_kdgkbmode(int console)
+int vt_do_kdgkbmode(unsigned int console)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	/* This is a spot read so needs no locking */
 	switch (kb->kbdmode) {
 	case VC_RAW:
@@ -2163,9 +2163,9 @@ int vt_do_kdgkbmode(int console)
  *
  *	Report the meta flag status of this console
  */
-int vt_do_kdgkbmeta(int console)
+int vt_do_kdgkbmeta(unsigned int console)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
         /* Again a spot read so no locking */
 	return vc_kbd_mode(kb, VC_META) ? K_ESCPREFIX : K_METABIT;
 }
@@ -2176,7 +2176,7 @@ int vt_do_kdgkbmeta(int console)
  *
  *	Restore the unicode console state to its default
  */
-void vt_reset_unicode(int console)
+void vt_reset_unicode(unsigned int console)
 {
 	unsigned long flags;
 
@@ -2204,9 +2204,9 @@ int vt_get_shift_state(void)
  *	Reset the keyboard bits for a console as part of a general console
  *	reset event
  */
-void vt_reset_keyboard(int console)
+void vt_reset_keyboard(unsigned int console)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	unsigned long flags;
 
 	spin_lock_irqsave(&kbd_event_lock, flags);
@@ -2234,9 +2234,9 @@ void vt_reset_keyboard(int console)
  *	caller must be sure that there are no synchronization needs
  */
 
-int vt_get_kbd_mode_bit(int console, int bit)
+int vt_get_kbd_mode_bit(unsigned int console, int bit)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	return vc_kbd_mode(kb, bit);
 }
 
@@ -2249,9 +2249,9 @@ int vt_get_kbd_mode_bit(int console, int bit)
  *	caller must be sure that there are no synchronization needs
  */
 
-void vt_set_kbd_mode_bit(int console, int bit)
+void vt_set_kbd_mode_bit(unsigned int console, int bit)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	unsigned long flags;
 
 	spin_lock_irqsave(&kbd_event_lock, flags);
@@ -2268,9 +2268,9 @@ void vt_set_kbd_mode_bit(int console, int bit)
  *	caller must be sure that there are no synchronization needs
  */
 
-void vt_clr_kbd_mode_bit(int console, int bit)
+void vt_clr_kbd_mode_bit(unsigned int console, int bit)
 {
-	struct kbd_struct *kb = kbd_table + console;
+	struct kbd_struct *kb = &kbd_table[console];
 	unsigned long flags;
 
 	spin_lock_irqsave(&kbd_event_lock, flags);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index cb72393f92d3..7359c3e80d63 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1219,8 +1219,25 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	new_row_size = new_cols << 1;
 	new_screen_size = new_row_size * new_rows;
 
-	if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
-		return 0;
+	if (new_cols == vc->vc_cols && new_rows == vc->vc_rows) {
+		/*
+		 * This function is being called here to cover the case
+		 * where the userspace calls the FBIOPUT_VSCREENINFO twice,
+		 * passing the same fb_var_screeninfo containing the fields
+		 * yres/xres equal to a number non-multiple of vc_font.height
+		 * and yres_virtual/xres_virtual equal to number lesser than the
+		 * vc_font.height and yres/xres.
+		 * In the second call, the struct fb_var_screeninfo isn't
+		 * being modified by the underlying driver because of the
+		 * if above, and this causes the fbcon_display->vrows to become
+		 * negative and it eventually leads to out-of-bound
+		 * access by the imageblit function.
+		 * To give the correct values to the struct and to not have
+		 * to deal with possible errors from the code below, we call
+		 * the resize_screen here as well.
+		 */
+		return resize_screen(vc, new_cols, new_rows, user);
+	}
 
 	if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size)
 		return -EINVAL;
@@ -3582,8 +3599,9 @@ int __init vty_init(const struct file_operations *console_fops)
 
 	vcs_init();
 
-	console_driver = alloc_tty_driver(MAX_NR_CONSOLES);
-	if (!console_driver)
+	console_driver = tty_alloc_driver(MAX_NR_CONSOLES, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_RESET_TERMIOS);
+	if (IS_ERR(console_driver))
 		panic("Couldn't allocate console driver\n");
 
 	console_driver->name = "tty";
@@ -3594,7 +3612,6 @@ int __init vty_init(const struct file_operations *console_fops)
 	console_driver->init_termios = tty_std_termios;
 	if (default_utf8)
 		console_driver->init_termios.c_iflag |= IUTF8;
-	console_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
 	tty_set_operations(console_driver, &con_ops);
 	if (tty_register_driver(console_driver))
 		panic("Couldn't register console driver\n");
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 4895325b16a4..8bbd8e29e60d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -2027,16 +2027,16 @@ static const struct tty_operations acm_ops = {
 static int __init acm_init(void)
 {
 	int retval;
-	acm_tty_driver = alloc_tty_driver(ACM_TTY_MINORS);
-	if (!acm_tty_driver)
-		return -ENOMEM;
+	acm_tty_driver = tty_alloc_driver(ACM_TTY_MINORS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(acm_tty_driver))
+		return PTR_ERR(acm_tty_driver);
 	acm_tty_driver->driver_name = "acm",
 	acm_tty_driver->name = "ttyACM",
 	acm_tty_driver->major = ACM_TTY_MAJOR,
 	acm_tty_driver->minor_start = 0,
 	acm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL,
 	acm_tty_driver->subtype = SERIAL_TYPE_NORMAL,
-	acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	acm_tty_driver->init_termios = tty_std_termios;
 	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD |
 								HUPCL | CLOCAL;
@@ -2044,14 +2044,14 @@ static int __init acm_init(void)
 
 	retval = tty_register_driver(acm_tty_driver);
 	if (retval) {
-		put_tty_driver(acm_tty_driver);
+		tty_driver_kref_put(acm_tty_driver);
 		return retval;
 	}
 
 	retval = usb_register(&acm_driver);
 	if (retval) {
 		tty_unregister_driver(acm_tty_driver);
-		put_tty_driver(acm_tty_driver);
+		tty_driver_kref_put(acm_tty_driver);
 		return retval;
 	}
 
@@ -2064,7 +2064,7 @@ static void __exit acm_exit(void)
 {
 	usb_deregister(&acm_driver);
 	tty_unregister_driver(acm_tty_driver);
-	put_tty_driver(acm_tty_driver);
+	tty_driver_kref_put(acm_tty_driver);
 	idr_destroy(&acm_minors);
 }
 
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 281ca766698a..6f68cbeeee7c 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -1445,51 +1445,53 @@ EXPORT_SYMBOL_GPL(gserial_resume);
 
 static int userial_init(void)
 {
+	struct tty_driver *driver;
 	unsigned			i;
 	int				status;
 
-	gs_tty_driver = alloc_tty_driver(MAX_U_SERIAL_PORTS);
-	if (!gs_tty_driver)
-		return -ENOMEM;
+	driver = tty_alloc_driver(MAX_U_SERIAL_PORTS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
 
-	gs_tty_driver->driver_name = "g_serial";
-	gs_tty_driver->name = "ttyGS";
+	driver->driver_name = "g_serial";
+	driver->name = "ttyGS";
 	/* uses dynamically assigned dev_t values */
 
-	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
-	gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	gs_tty_driver->init_termios = tty_std_termios;
+	driver->type = TTY_DRIVER_TYPE_SERIAL;
+	driver->subtype = SERIAL_TYPE_NORMAL;
+	driver->init_termios = tty_std_termios;
 
 	/* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
 	 * MS-Windows.  Otherwise, most of these flags shouldn't affect
 	 * anything unless we were to actually hook up to a serial line.
 	 */
-	gs_tty_driver->init_termios.c_cflag =
+	driver->init_termios.c_cflag =
 			B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	gs_tty_driver->init_termios.c_ispeed = 9600;
-	gs_tty_driver->init_termios.c_ospeed = 9600;
+	driver->init_termios.c_ispeed = 9600;
+	driver->init_termios.c_ospeed = 9600;
 
-	tty_set_operations(gs_tty_driver, &gs_tty_ops);
+	tty_set_operations(driver, &gs_tty_ops);
 	for (i = 0; i < MAX_U_SERIAL_PORTS; i++)
 		mutex_init(&ports[i].lock);
 
 	/* export the driver ... */
-	status = tty_register_driver(gs_tty_driver);
+	status = tty_register_driver(driver);
 	if (status) {
 		pr_err("%s: cannot register, err %d\n",
 				__func__, status);
 		goto fail;
 	}
 
+	gs_tty_driver = driver;
+
 	pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
 			MAX_U_SERIAL_PORTS,
 			(MAX_U_SERIAL_PORTS == 1) ? "" : "s");
 
 	return status;
 fail:
-	put_tty_driver(gs_tty_driver);
-	gs_tty_driver = NULL;
+	tty_driver_kref_put(driver);
 	return status;
 }
 module_init(userial_init);
@@ -1497,7 +1499,7 @@ module_init(userial_init);
 static void userial_cleanup(void)
 {
 	tty_unregister_driver(gs_tty_driver);
-	put_tty_driver(gs_tty_driver);
+	tty_driver_kref_put(gs_tty_driver);
 	gs_tty_driver = NULL;
 }
 module_exit(userial_cleanup);
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index bef104511352..6e784f2fc26d 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -541,7 +541,7 @@ static int dbc_tty_init(void)
 	ret = tty_register_driver(dbc_tty_driver);
 	if (ret) {
 		pr_err("Can't register dbc tty driver\n");
-		put_tty_driver(dbc_tty_driver);
+		tty_driver_kref_put(dbc_tty_driver);
 	}
 	return ret;
 }
@@ -550,7 +550,7 @@ static void dbc_tty_exit(void)
 {
 	if (dbc_tty_driver) {
 		tty_unregister_driver(dbc_tty_driver);
-		put_tty_driver(dbc_tty_driver);
+		tty_driver_kref_put(dbc_tty_driver);
 		dbc_tty_driver = NULL;
 	}
 }
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index eeb441c77207..090a78c948f2 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1319,9 +1319,10 @@ static int __init usb_serial_init(void)
 {
 	int result;
 
-	usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS);
-	if (!usb_serial_tty_driver)
-		return -ENOMEM;
+	usb_serial_tty_driver = tty_alloc_driver(USB_SERIAL_TTY_MINORS,
+			TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(usb_serial_tty_driver))
+		return PTR_ERR(usb_serial_tty_driver);
 
 	/* Initialize our global data */
 	result = bus_register(&usb_serial_bus_type);
@@ -1336,8 +1337,6 @@ static int __init usb_serial_init(void)
 	usb_serial_tty_driver->minor_start = 0;
 	usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 	usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
-	usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
-						TTY_DRIVER_DYNAMIC_DEV;
 	usb_serial_tty_driver->init_termios = tty_std_termios;
 	usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
 							| HUPCL | CLOCAL;
@@ -1367,7 +1366,7 @@ exit_reg_driver:
 
 exit_bus:
 	pr_err("%s - returning with error %d\n", __func__, result);
-	put_tty_driver(usb_serial_tty_driver);
+	tty_driver_kref_put(usb_serial_tty_driver);
 	return result;
 }
 
@@ -1379,7 +1378,7 @@ static void __exit usb_serial_exit(void)
 	usb_serial_generic_deregister();
 
 	tty_unregister_driver(usb_serial_tty_driver);
-	put_tty_driver(usb_serial_tty_driver);
+	tty_driver_kref_put(usb_serial_tty_driver);
 	bus_unregister(&usb_serial_bus_type);
 	idr_destroy(&serial_minors);
 }
author	Linus Torvalds <torvalds@linux-foundation.org>	2021-09-01 09:51:16 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2021-09-01 09:51:16 -0700
commit	7c314bdfb64e4bb8d2f829376ed56ce663483752 (patch)
tree	ce846e0c4e8c8138258dd00c1f15aad7368fafbb /drivers
parent	ebf435d3b51b22340ef047aad0c2936ec4833ab2 (diff)
parent	2e5f3a69b6fcd52a64ce3d746c6ee8390b6cabe8 (diff)
download	linux-7c314bdfb64e4bb8d2f829376ed56ce663483752.tar.gz