Merge tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "A new bunch of GPIO fixes for v4.7.

  This time I am very grateful that Ricardo Ribalda Delgado went in and
  fixed my stupid refcounting mistakes in the removal path for GPIO
  chips.  I had a feeling something was wrong here and so it was.  It
  exploded on OMAP and it fixes their problem.  Now it should be (more)
  solid.

  The rest i compilation, Kconfig and driver fixes.  Some tagged for
  stable.

  Summary:

   - Fix a NULL pointer dereference when we are searching the GPIO
     device list but one of the devices have been removed (struct
     gpio_chip pointer is NULL).

   - Fix unaligned reference counters: we were ending on +3 after all
     said and done.  It should be 0.  Remove an extraneous get_device(),
     and call cdev_del() followed by device_del() in gpiochip_remove()
     instead and the count goes to zero and calls the release() function
     properly.

   - Fix a compile warning due to a missing #include in the OF/device
     tree portions.

   - Select ANON_INODES for GPIOLIB, we're using that for our character
     device.  Some randconfig tests disclosed the problem.

   - Make sure the Zynq driver clock runs also without CONFIG_PM enabled

   - Fix an off-by-one error in the 104-DIO-48E driver

   - Fix warnings in bcm_kona_gpio_reset()"

* tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
  gpio: select ANON_INODES
  gpio: include <linux/io-mapping.h> in gpiolib-of
  gpiolib: Fix unaligned used of reference counters
  gpiolib: Fix NULL pointer deference
  gpio: zynq: initialize clock even without CONFIG_PM
  gpio: 104-dio-48e: Fix control port offset computation off-by-one error

6 files changed, 16 insertions, 7 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 48da857f4774..a116609b1914 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -33,6 +33,7 @@ config ARCH_REQUIRE_GPIOLIB
 
 menuconfig GPIOLIB
 	bool "GPIO Support"
+	select ANON_INODES
 	help
 	  This enables GPIO support through the generic GPIO library.
 	  You only need to enable this, if you also want to enable
diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index 1a647c07be67..fcf776971ca9 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -75,7 +75,7 @@ static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned io_port = offset / 8;
-	const unsigned control_port = io_port / 2;
+	const unsigned int control_port = io_port / 3;
 	const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
 	unsigned long flags;
 	unsigned control;
@@ -115,7 +115,7 @@ static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned io_port = offset / 8;
-	const unsigned control_port = io_port / 2;
+	const unsigned int control_port = io_port / 3;
 	const unsigned mask = BIT(offset % 8);
 	const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
 	const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 9aabc48ff5de..953e4b829e32 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -547,11 +547,11 @@ static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
 	/* disable interrupts and clear status */
 	for (i = 0; i < kona_gpio->num_bank; i++) {
 		/* Unlock the entire bank first */
-		bcm_kona_gpio_write_lock_regs(kona_gpio, i, UNLOCK_CODE);
+		bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
 		writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
 		writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
 		/* Now re-lock the bank */
-		bcm_kona_gpio_write_lock_regs(kona_gpio, i, LOCK_CODE);
+		bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
 	}
 }
 
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 75c6355b018d..e72794e463aa 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -709,7 +709,13 @@ static int zynq_gpio_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "input clock not found.\n");
 		return PTR_ERR(gpio->clk);
 	}
+	ret = clk_prepare_enable(gpio->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
 
+	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0)
@@ -747,6 +753,7 @@ err_pm_put:
 	pm_runtime_put(&pdev->dev);
 err_pm_dis:
 	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(gpio->clk);
 
 	return ret;
 }
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index d22dcc38179d..4aabddb38b59 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/io-mapping.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 24f60d28f0c0..58d822d7e8da 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -449,7 +449,6 @@ static void gpiodevice_release(struct device *dev)
 {
 	struct gpio_device *gdev = dev_get_drvdata(dev);
 
-	cdev_del(&gdev->chrdev);
 	list_del(&gdev->list);
 	ida_simple_remove(&gpio_ida, gdev->id);
 	kfree(gdev->label);
@@ -482,7 +481,6 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
 
 	/* From this point, the .release() function cleans up gpio_device */
 	gdev->dev.release = gpiodevice_release;
-	get_device(&gdev->dev);
 	pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
 		 __func__, gdev->base, gdev->base + gdev->ngpio - 1,
 		 dev_name(&gdev->dev), gdev->chip->label ? : "generic");
@@ -770,6 +768,8 @@ void gpiochip_remove(struct gpio_chip *chip)
 	 * be removed, else it will be dangling until the last user is
 	 * gone.
 	 */
+	cdev_del(&gdev->chrdev);
+	device_del(&gdev->dev);
 	put_device(&gdev->dev);
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);
@@ -869,7 +869,7 @@ struct gpio_chip *gpiochip_find(void *data,
 
 	spin_lock_irqsave(&gpio_lock, flags);
 	list_for_each_entry(gdev, &gpio_devices, list)
-		if (match(gdev->chip, data))
+		if (gdev->chip && match(gdev->chip, data))
 			break;
 
 	/* No match? */