Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC platform changes. Main theme this merge window:

   - The Netx platform (Netx 100/500) platform is removed by Linus
     Walleij-- the SoC doesn't have active maintainers with hardware,
     and in discussions with the vendor the agreement was that it's OK
     to remove.

   - Russell King has a series of patches that cleans up and refactors
     SA1101 and RiscPC support"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  ARM: stm32: use "depends on" instead of "if" after prompt
  ARM: sa1100: convert to common clock framework
  ARM: exynos: Cleanup cppcheck shifting warning
  ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
  ARM: exynos: Only build MCPM support if used
  arm: add missing include platform-data/atmel.h
  ARM: davinci: Use GPIO lookup table for DA850 LEDs
  ARM: OMAP2: drop explicit assembler architecture
  ARM: use arch_extension directive instead of arch argument
  ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
  ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
  ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
  ARM: riscpc: enable chained scatterlist support
  ARM: riscpc: reduce IRQ handling code
  ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
  ARM: riscpc: parse video information from tagged list
  ARM: riscpc: add ecard quirk for Atomwide 3port serial card
  MAINTAINERS: mvebu: Add git entry
  soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
  ARM: OMAP2+: Make some variables static
  ...

4 files changed, 47 insertions, 5 deletions

diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 68bfca6f20dd..2bbf49e5d441 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -57,14 +57,16 @@ config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
 	select PM
 	select PM_GENERIC_DOMAINS
-	select SYS_SUPPORTS_SH_MTU2
 	select RENESAS_OSTM
+	select RENESAS_RZA1_IRQC
+	select SYS_SUPPORTS_SH_MTU2
 
 config ARCH_R7S9210
 	bool "RZ/A2 (R7S9210)"
 	select PM
 	select PM_GENERIC_DOMAINS
 	select RENESAS_OSTM
+	select RENESAS_RZA1_IRQC
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index fc5802ccb1c0..bb77c220b6f8 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -178,6 +178,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state)
 					  suspend_wfi_flags);
 
 		suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY;
+		dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n");
 
 		if (!ret) {
 			clk_restore_context();
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 04c23951b831..fd385c8c53a5 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -497,6 +497,7 @@ config SERIAL_SA1100
 	bool "SA1100 serial port support"
 	depends on ARCH_SA1100
 	select SERIAL_CORE
+	select SERIAL_MCTRL_GPIO if GPIOLIB
 	help
 	  If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
 	  can enable its onboard serial port by enabling this option.
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index a399772be3fc..8e618129e65c 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -28,6 +28,8 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#include "serial_mctrl_gpio.h"
+
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_SA1100_MAJOR	204
 #define MINOR_START		5
@@ -77,6 +79,7 @@ struct sa1100_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
+	struct mctrl_gpios	*gpios;
 };
 
 /*
@@ -174,6 +177,8 @@ static void sa1100_enable_ms(struct uart_port *port)
 		container_of(port, struct sa1100_port, port);
 
 	mod_timer(&sport->timer, jiffies);
+
+	mctrl_gpio_enable_ms(sport->gpios);
 }
 
 static void
@@ -322,11 +327,21 @@ static unsigned int sa1100_tx_empty(struct uart_port *port)
 
 static unsigned int sa1100_get_mctrl(struct uart_port *port)
 {
-	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+	struct sa1100_port *sport =
+		container_of(port, struct sa1100_port, port);
+	int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	mctrl_gpio_get(sport->gpios, &ret);
+
+	return ret;
 }
 
 static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
+	struct sa1100_port *sport =
+		container_of(port, struct sa1100_port, port);
+
+	mctrl_gpio_set(sport->gpios, mctrl);
 }
 
 /*
@@ -842,6 +857,31 @@ static int sa1100_serial_resume(struct platform_device *dev)
 	return 0;
 }
 
+static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev)
+{
+	sport->port.dev = &dev->dev;
+
+	// mctrl_gpio_init() requires that the GPIO driver supports interrupts,
+	// but we need to support GPIO drivers for hardware that has no such
+	// interrupts.  Use mctrl_gpio_init_noauto() instead.
+	sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0);
+	if (IS_ERR(sport->gpios)) {
+		int err = PTR_ERR(sport->gpios);
+
+		dev_err(sport->port.dev, "failed to get mctrl gpios: %d\n",
+			err);
+
+		if (err == -EPROBE_DEFER)
+			return err;
+
+		sport->gpios = NULL;
+	}
+
+	platform_set_drvdata(dev, sport);
+
+	return uart_add_one_port(&sa1100_reg, &sport->port);
+}
+
 static int sa1100_serial_probe(struct platform_device *dev)
 {
 	struct resource *res = dev->resource;
@@ -856,9 +896,7 @@ static int sa1100_serial_probe(struct platform_device *dev)
 			if (sa1100_ports[i].port.mapbase != res->start)
 				continue;
 
-			sa1100_ports[i].port.dev = &dev->dev;
-			uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port);
-			platform_set_drvdata(dev, &sa1100_ports[i]);
+			sa1100_serial_add_one_port(&sa1100_ports[i], dev);
 			break;
 		}
 	}