Merge tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH:
 "Here is the "large" set of tty and serial patches for 5.11-rc1.

  Nothing major at all, some cleanups and some driver removals, always a
  nice sign:

   - build warning cleanups

   - vt locking and logic unwinding and cleanups

   - tiny serial driver fixes and updates

   - removal of the synclink serial driver as it's no longer needed

   - removal of dead termiox code

  All of this has been in linux-next for a while with no reported issues"

* tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits)
  serial: 8250_pci: Drop bogus __refdata annotation
  tty: serial: meson: enable console as module
  serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access
  serial: imx: Move imx_uart_probe_dt() content into probe()
  serial: imx: Remove unneeded of_device_get_match_data() NULL check
  tty: Fix whitespace inconsistencies in vt_io_ioctl
  serial_core: Check for port state when tty is in error state
  dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC
  tty: use const parameters in port-flag accessors
  tty: use assign_bit() in port-flag accessors
  earlycon: drop semicolon from earlycon macro
  tty: Remove dead termiox code
  tty/serial/imx: Enable TXEN bit in imx_poll_init().
  tty : serial: jsm: Fixed file by adding spacing
  tty: serial: uartlite: Support probe deferral
  earlycon: simplify earlycon-table implementation
  tty: serial: bcm63xx: lower driver dependencies
  serial: mxs-auart: Remove unneeded platform_device_id
  serial: 8250-mtk: Fix reference leak in mtk8250_probe
  serial: imx: Remove unused .id_table support
  ...

53 files changed, 429 insertions, 14938 deletions

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 4602e467ca8b..feb0f2d67fc5 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -906,7 +906,7 @@ int __init early_init_dt_scan_chosen_stdout(void)
 	int offset;
 	const char *p, *q, *options = NULL;
 	int l;
-	const struct earlycon_id **p_match;
+	const struct earlycon_id *match;
 	const void *fdt = initial_boot_params;
 
 	offset = fdt_path_offset(fdt, "/chosen");
@@ -933,10 +933,7 @@ int __init early_init_dt_scan_chosen_stdout(void)
 		return 0;
 	}
 
-	for (p_match = __earlycon_table; p_match < __earlycon_table_end;
-	     p_match++) {
-		const struct earlycon_id *match = *p_match;
-
+	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		if (!match->compatible[0])
 			continue;
 
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 93fd984eb2f5..e15cd6b5bb99 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -259,33 +259,6 @@ config MOXA_SMARTIO
 	  This driver can also be built as a module. The module will be called
 	  mxser. If you want to do that, say M here.
 
-config SYNCLINK
-	tristate "Microgate SyncLink card support"
-	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
-	help
-	  Provides support for the SyncLink ISA and PCI multiprotocol serial
-	  adapters. These adapters support asynchronous and HDLC bit
-	  synchronous communication up to 10Mbps (PCI adapter).
-
-	  This driver can only be built as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called synclink.  If you want to do that, say M
-	  here.
-
-config SYNCLINKMP
-	tristate "SyncLink Multiport support"
-	depends on SERIAL_NONSTANDARD && PCI
-	help
-	  Enable support for the SyncLink Multiport (2 or 4 ports)
-	  serial adapter, running asynchronous and HDLC communications up
-	  to 2.048Mbps. Each ports is independently selectable for
-	  RS-232, V.35, RS-449, RS-530, and X.21
-
-	  This driver may be built as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called synclinkmp.  If you want to do that, say M
-	  here.
-
 config SYNCLINK_GT
 	tristate "SyncLink GT/AC support"
 	depends on SERIAL_NONSTANDARD && PCI
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 020b1cd9294f..b3ccae932660 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -28,8 +28,6 @@ obj-$(CONFIG_NOZOMI)		+= nozomi.o
 obj-$(CONFIG_NULL_TTY)	        += ttynull.o
 obj-$(CONFIG_ROCKETPORT)	+= rocket.o
 obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
-obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o
-obj-$(CONFIG_SYNCLINK)		+= synclink.o
 obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o
 obj-$(CONFIG_GOLDFISH_TTY)	+= goldfish.o
 obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index c8c5cdfc5e19..cd23a4b05c8f 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -61,13 +61,13 @@ static void do_rw_io(struct goldfish_tty *qtty,
 	spin_lock_irqsave(&qtty->lock, irq_flags);
 	gf_write_ptr((void *)address, base + GOLDFISH_TTY_REG_DATA_PTR,
 		     base + GOLDFISH_TTY_REG_DATA_PTR_HIGH);
-	writel(count, base + GOLDFISH_TTY_REG_DATA_LEN);
+	__raw_writel(count, base + GOLDFISH_TTY_REG_DATA_LEN);
 
 	if (is_write)
-		writel(GOLDFISH_TTY_CMD_WRITE_BUFFER,
+		__raw_writel(GOLDFISH_TTY_CMD_WRITE_BUFFER,
 		       base + GOLDFISH_TTY_REG_CMD);
 	else
-		writel(GOLDFISH_TTY_CMD_READ_BUFFER,
+		__raw_writel(GOLDFISH_TTY_CMD_READ_BUFFER,
 		       base + GOLDFISH_TTY_REG_CMD);
 
 	spin_unlock_irqrestore(&qtty->lock, irq_flags);
@@ -142,7 +142,7 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id)
 	unsigned char *buf;
 	u32 count;
 
-	count = readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+	count = __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
 	if (count == 0)
 		return IRQ_NONE;
 
@@ -159,7 +159,7 @@ static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty)
 {
 	struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
 									port);
-	writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+	__raw_writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
 	return 0;
 }
 
@@ -167,7 +167,7 @@ static void goldfish_tty_shutdown(struct tty_port *port)
 {
 	struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
 									port);
-	writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+	__raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
 }
 
 static int goldfish_tty_open(struct tty_struct *tty, struct file *filp)
@@ -202,7 +202,7 @@ static int goldfish_tty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct goldfish_tty *qtty = &goldfish_ttys[tty->index];
 	void __iomem *base = qtty->base;
-	return readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+	return __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
 }
 
 static void goldfish_tty_console_write(struct console *co, const char *b,
@@ -357,7 +357,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 	 * on Ranchu emulator (qemu2) returns 1 here and
 	 * driver will use physical addresses.
 	 */
-	qtty->version = readl(base + GOLDFISH_TTY_REG_VERSION);
+	qtty->version = __raw_readl(base + GOLDFISH_TTY_REG_VERSION);
 
 	/*
 	 * Goldfish TTY device on Ranchu emulator (qemu2)
@@ -376,7 +376,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 		}
 	}
 
-	writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
+	__raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
 
 	ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED,
 			  "goldfish_tty", qtty);
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index c66412566efc..056ae21a5121 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -103,7 +103,7 @@ static void hvc_opal_hvsi_close(struct hvc_struct *hp, int data)
 	notifier_del_irq(hp, data);
 }
 
-void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data)
+static void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data)
 {
 	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
 
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 7af54d6ed5b8..798f27f40cc2 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -178,7 +178,7 @@ static void hvterm_hvsi_close(struct hvc_struct *hp, int data)
 	notifier_del_irq(hp, data);
 }
 
-void hvterm_hvsi_hangup(struct hvc_struct *hp, int data)
+static void hvterm_hvsi_hangup(struct hvc_struct *hp, int data)
 {
 	struct hvterm_priv *pv = hvterm_privs[hp->vtermno];
 
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 25f3152089c2..c676fa89ee0b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -74,7 +74,7 @@ module_param(debug, int, 0600);
 #define MAX_MTU 1500
 #define	GSM_NET_TX_TIMEOUT (HZ*10)
 
-/**
+/*
  *	struct gsm_mux_net	-	network interface
  *
  *	Created when net interface is initialized.
@@ -651,6 +651,7 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
 /**
  *	gsm_data_kick		-	poke the queue
  *	@gsm: GSM Mux
+ *	@dlci: DLCI sending the data
  *
  *	The tty device has called us to indicate that room has appeared in
  *	the transmit queue. Ram more data into the pipe if we have any
@@ -1005,6 +1006,7 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data,
  *	@tty: virtual tty bound to the DLCI
  *	@dlci: DLCI to affect
  *	@modem: modem bits (full EA)
+ *	@clen: command length
  *
  *	Used when a modem control message or line state inline in adaption
  *	layer 2 is processed. Sort out the local modem state and throttles
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 7e5e36315260..319d68c8a5df 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -396,6 +396,7 @@ static inline int is_utf8_continuation(unsigned char c)
 /**
  *	is_continuation		-	multibyte check
  *	@c: byte to check
+ *	@tty: terminal device
  *
  *	Returns true if the utf8 character 'c' is a multibyte continuation
  *	character and the terminal is in unicode mode.
@@ -1668,6 +1669,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
  *	@cp: input chars
  *	@fp: flags for each char (if NULL, all chars are TTY_NORMAL)
  *	@count: number of input chars in @cp
+ *	@flow: enable flow control
  *
  *	Called by the terminal driver when a block of characters has
  *	been received. This function must be called from soft contexts
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index d42b854cb7df..861e95043191 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -414,11 +414,9 @@ static void read_mem32(u32 *buf, const void __iomem *mem_addr_start,
 		buf16 = (u16 *) buf;
 		*buf16 = __le16_to_cpu(readw(ptr));
 		goto out;
-		break;
 	case 4:	/* 4 bytes */
 		*(buf) = __le32_to_cpu(readl(ptr));
 		goto out;
-		break;
 	}
 
 	while (i < size_bytes) {
@@ -460,15 +458,14 @@ static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
 		buf16 = (const u16 *)buf;
 		writew(__cpu_to_le16(*buf16), ptr);
 		return 2;
-		break;
 	case 1: /*
 		 * also needs to write 4 bytes in this case
 		 * so falling through..
 		 */
+		fallthrough;
 	case 4: /* 4 bytes */
 		writel(__cpu_to_le32(*buf), ptr);
 		return 4;
-		break;
 	}
 
 	while (i < size_bytes) {
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 23368cec7ee8..a59f1e062bc6 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -699,6 +699,7 @@ static long pty_unix98_compat_ioctl(struct tty_struct *tty,
 /**
  *	ptm_unix98_lookup	-	find a pty master
  *	@driver: ptm driver
+ *	@file: unused
  *	@idx: tty index
  *
  *	Look up a pty master device. Called under the tty_mutex for now.
@@ -715,6 +716,7 @@ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
 /**
  *	pts_unix98_lookup	-	find a pty slave
  *	@driver: pts driver
+ *	@file: file pointer to tty
  *	@idx: tty index
  *
  *	Look up a pty master device. Called under the tty_mutex for now.
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index c5f0d936b003..aead0c0c9796 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -788,13 +788,10 @@ static int serdev_remove_device(struct device *dev, void *data)
  */
 void serdev_controller_remove(struct serdev_controller *ctrl)
 {
-	int dummy;
-
 	if (!ctrl)
 		return;
 
-	dummy = device_for_each_child(&ctrl->dev, NULL,
-				      serdev_remove_device);
+	device_for_each_child(&ctrl->dev, NULL, serdev_remove_device);
 	pm_runtime_disable(&ctrl->dev);
 	device_del(&ctrl->dev);
 }
@@ -803,6 +800,7 @@ EXPORT_SYMBOL_GPL(serdev_controller_remove);
 /**
  * serdev_driver_register() - Register client driver with serdev core
  * @sdrv:	client driver to be associated with client-device.
+ * @owner:	client driver owner to set.
  *
  * This API will register the client driver with the serdev framework.
  * It is typically called from the driver's module-init function.
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 70d7826788f5..c171ce6db691 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -204,9 +204,6 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
 
 #ifdef CONFIG_SERIAL_8250_RT288X
 
-unsigned int au_serial_in(struct uart_port *p, int offset);
-void au_serial_out(struct uart_port *p, int offset, int value);
-
 static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
 {
 	dev->port.serial_in = au_serial_in;
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index fa876e2c13e5..f7d3023f860f 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -572,15 +572,22 @@ static int mtk8250_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	err = mtk8250_runtime_resume(&pdev->dev);
 	if (err)
-		return err;
+		goto err_pm_disable;
 
 	data->line = serial8250_register_8250_port(&uart);
-	if (data->line < 0)
-		return data->line;
+	if (data->line < 0) {
+		err = data->line;
+		goto err_pm_disable;
+	}
 
 	data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1);
 
 	return 0;
+
+err_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+
+	return err;
 }
 
 static int mtk8250_remove(struct platform_device *pdev)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 562087df7d33..23e0decde33e 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -27,6 +27,7 @@
 #include <linux/pm_qos.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
 
 #include "8250.h"
 
@@ -41,6 +42,7 @@
  */
 #define UART_ERRATA_CLOCK_DISABLE	(1 << 3)
 #define	UART_HAS_EFR2			BIT(4)
+#define UART_HAS_RHR_IT_DIS		BIT(5)
 
 #define OMAP_UART_FCR_RX_TRIG		6
 #define OMAP_UART_FCR_TX_TRIG		4
@@ -94,6 +96,10 @@
 #define OMAP_UART_REV_52 0x0502
 #define OMAP_UART_REV_63 0x0603
 
+/* Interrupt Enable Register 2 */
+#define UART_OMAP_IER2			0x1B
+#define UART_OMAP_IER2_RHR_IT_DIS	BIT(2)
+
 /* Enhanced features register 2 */
 #define UART_OMAP_EFR2			0x23
 #define UART_OMAP_EFR2_TIMEOUT_BEHAVE	BIT(6)
@@ -184,11 +190,6 @@ static void omap_8250_mdr1_errataset(struct uart_8250_port *up,
 				     struct omap8250_priv *priv)
 {
 	u8 timeout = 255;
-	u8 old_mdr1;
-
-	old_mdr1 = serial_in(up, UART_OMAP_MDR1);
-	if (old_mdr1 == priv->mdr1)
-		return;
 
 	serial_out(up, UART_OMAP_MDR1, priv->mdr1);
 	udelay(2);
@@ -533,6 +534,11 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state,
 static void omap_serial_fill_features_erratas(struct uart_8250_port *up,
 					      struct omap8250_priv *priv)
 {
+	const struct soc_device_attribute k3_soc_devices[] = {
+		{ .family = "AM65X",  },
+		{ .family = "J721E", .revision = "SR1.0" },
+		{ /* sentinel */ }
+	};
 	u32 mvr, scheme;
 	u16 revision, major, minor;
 
@@ -580,6 +586,14 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up,
 	default:
 		break;
 	}
+
+	/*
+	 * AM65x SR1.0, AM65x SR2.0 and J721e SR1.0 don't
+	 * don't have RHR_IT_DIS bit in IER2 register. So drop to flag
+	 * to enable errata workaround.
+	 */
+	if (soc_device_match(k3_soc_devices))
+		priv->habit &= ~UART_HAS_RHR_IT_DIS;
 }
 
 static void omap8250_uart_qos_work(struct work_struct *work)
@@ -761,17 +775,27 @@ static void __dma_rx_do_complete(struct uart_8250_port *p)
 {
 	struct uart_8250_dma    *dma = p->dma;
 	struct tty_port         *tty_port = &p->port.state->port;
+	struct omap8250_priv	*priv = p->port.private_data;
 	struct dma_chan		*rxchan = dma->rxchan;
 	dma_cookie_t		cookie;
 	struct dma_tx_state     state;
 	int                     count;
 	int			ret;
+	u32			reg;
 
 	if (!dma->rx_running)
 		goto out;
 
 	cookie = dma->rx_cookie;
 	dma->rx_running = 0;
+
+	/* Re-enable RX FIFO interrupt now that transfer is complete */
+	if (priv->habit & UART_HAS_RHR_IT_DIS) {
+		reg = serial_in(p, UART_OMAP_IER2);
+		reg &= ~UART_OMAP_IER2_RHR_IT_DIS;
+		serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+	}
+
 	dmaengine_tx_status(rxchan, cookie, &state);
 
 	count = dma->rx_size - state.residue + state.in_flight_bytes;
@@ -867,6 +891,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p)
 	int				err = 0;
 	struct dma_async_tx_descriptor  *desc;
 	unsigned long			flags;
+	u32				reg;
 
 	if (priv->rx_dma_broken)
 		return -EINVAL;
@@ -902,6 +927,17 @@ static int omap_8250_rx_dma(struct uart_8250_port *p)
 
 	dma->rx_cookie = dmaengine_submit(desc);
 
+	/*
+	 * Disable RX FIFO interrupt while RX DMA is enabled, else
+	 * spurious interrupt may be raised when data is in the RX FIFO
+	 * but is yet to be drained by DMA.
+	 */
+	if (priv->habit & UART_HAS_RHR_IT_DIS) {
+		reg = serial_in(p, UART_OMAP_IER2);
+		reg |= UART_OMAP_IER2_RHR_IT_DIS;
+		serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+	}
+
 	dma_async_issue_pending(dma->rxchan);
 out:
 	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
@@ -1182,7 +1218,7 @@ static struct omap8250_dma_params am33xx_dma = {
 
 static struct omap8250_platdata am654_platdata = {
 	.dma_params	= &am654_dma,
-	.habit		= UART_HAS_EFR2,
+	.habit		= UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS,
 };
 
 static struct omap8250_platdata am33xx_platdata = {
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index d5a513efb261..689d8227f95f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1964,7 +1964,7 @@ pci_moxa_setup(struct serial_private *priv,
  * This list is ordered alphabetically by vendor then device.
  * Specific entries must come before more generic entries.
  */
-static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
+static struct pci_serial_quirk pci_serial_quirks[] = {
 	/*
 	* ADDI-DATA GmbH communication cards <info@addi-data.com>
 	*/
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index e3d10794dbba..35ff6627c61b 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -559,16 +559,13 @@ static int multi_config(struct pcmcia_device *link)
 	 */
 	if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
 				info->prodid == PRODID_POSSIO_GCC)) {
-		int err;
-
 		if (link->config_index == 1 ||
 		    link->config_index == 3) {
-			err = setup_serial(link, info, base2,
-					link->irq);
+			setup_serial(link, info, base2, link->irq);
 			base2 = link->resource[0]->start;
 		} else {
-			err = setup_serial(link, info, link->resource[0]->start,
-					link->irq);
+			setup_serial(link, info, link->resource[0]->start,
+				     link->irq);
 		}
 		info->c950ctrl = base2;
 
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 28f22e58639c..12d71d5eb6ca 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -206,7 +206,7 @@ config SERIAL_MESON
 
 config SERIAL_MESON_CONSOLE
 	bool "Support for console on meson"
-	depends on SERIAL_MESON=y
+	depends on SERIAL_MESON
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 	help
@@ -704,22 +704,6 @@ config SERIAL_SH_SCI_DMA
 	depends on SERIAL_SH_SCI && DMA_ENGINE
 	default ARCH_RENESAS
 
-config SERIAL_PNX8XXX
-	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on SOC_PNX833X
-	select SERIAL_CORE
-	help
-	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
-	  to use serial ports, say Y.  Otherwise, say N.
-
-config SERIAL_PNX8XXX_CONSOLE
-	bool "Enable PNX8XX0 serial console"
-	depends on SERIAL_PNX8XXX
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
-	  to use serial console, say Y. Otherwise, say N.
-
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"
 	depends on ARCH_LPC32XX || COMPILE_TEST
@@ -1133,7 +1117,7 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on MIPS || ARM || COMPILE_TEST
+	depends on COMMON_CLK
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index caf167f0c10a..af44b231123c 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
 obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
-obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 87dc3fc15694..c255476cce28 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2789,7 +2789,7 @@ static const struct of_device_id sbsa_uart_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
 
-static const struct acpi_device_id sbsa_uart_acpi_match[] = {
+static const struct acpi_device_id __maybe_unused sbsa_uart_acpi_match[] = {
 	{ "ARMH0011", 0 },
 	{},
 };
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index b70877932d47..57c70851f22a 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -175,7 +175,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
  */
 int __init setup_earlycon(char *buf)
 {
-	const struct earlycon_id **p_match;
+	const struct earlycon_id *match;
 	bool empty_compatible = true;
 
 	if (!buf || !buf[0])
@@ -185,9 +185,7 @@ int __init setup_earlycon(char *buf)
 		return -EALREADY;
 
 again:
-	for (p_match = __earlycon_table; p_match < __earlycon_table_end;
-	     p_match++) {
-		const struct earlycon_id *match = *p_match;
+	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		size_t len = strlen(match->name);
 
 		if (strncmp(buf, match->name, len))
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index 3e28be402aef..d87048073abe 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -252,23 +252,22 @@ static irqreturn_t linflex_rxint(int irq, void *dev_id)
 		flg = TTY_NORMAL;
 		sport->icount.rx++;
 
-		if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_SZF |
-			      LINFLEXD_UARTSR_FEF | LINFLEXD_UARTSR_PE)) {
-			if (status & LINFLEXD_UARTSR_SZF)
-				status |= LINFLEXD_UARTSR_SZF;
+		if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_FEF |
+				LINFLEXD_UARTSR_PE)) {
 			if (status & LINFLEXD_UARTSR_BOF)
-				status |= LINFLEXD_UARTSR_BOF;
+				sport->icount.overrun++;
 			if (status & LINFLEXD_UARTSR_FEF) {
-				if (!rx)
+				if (!rx) {
 					brk = true;
-				status |= LINFLEXD_UARTSR_FEF;
+					sport->icount.brk++;
+				} else
+					sport->icount.frame++;
 			}
 			if (status & LINFLEXD_UARTSR_PE)
-				status |=  LINFLEXD_UARTSR_PE;
+				sport->icount.parity++;
 		}
 
-		writel(status | LINFLEXD_UARTSR_RMB | LINFLEXD_UARTSR_DRFRFE,
-		       sport->membase + UARTSR);
+		writel(status, sport->membase + UARTSR);
 		status = readl(sport->membase + UARTSR);
 
 		if (brk) {
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 21d519c804cb..182e0ccd60b2 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -545,6 +545,7 @@ static void ifx_spi_hangup(struct tty_struct *tty)
 /**
  *	ifx_port_activate
  *	@port: our tty port
+ *	@tty: our tty device
  *
  *	tty port activate method - called for first open. Serialized
  *	with hangup and shutdown by the tty layer.
@@ -719,7 +720,7 @@ complete_exit:
 
 /**
  *	ifx_spio_io		-	I/O tasklet
- *	@data: our SPI device
+ *	@t: tasklet construct used to fetch the SPI device
  *
  *	Queue data for transmission if possible and then kick off the
  *	transfer.
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index cacf7266a262..425624d794dd 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -30,7 +30,6 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
-#include <linux/platform_data/serial-imx.h>
 #include <linux/platform_data/dma-imx.h>
 
 #include "serial_mctrl_gpio.h"
@@ -263,25 +262,6 @@ static struct imx_uart_data imx_uart_devdata[] = {
 	},
 };
 
-static const struct platform_device_id imx_uart_devtype[] = {
-	{
-		.name = "imx1-uart",
-		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
-	}, {
-		.name = "imx21-uart",
-		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
-	}, {
-		.name = "imx53-uart",
-		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX53_UART],
-	}, {
-		.name = "imx6q-uart",
-		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART],
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
-
 static const struct of_device_id imx_uart_dt_ids[] = {
 	{ .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
 	{ .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
@@ -1881,7 +1861,7 @@ static int imx_uart_poll_init(struct uart_port *port)
 	ucr1 |= UCR1_UARTEN;
 	ucr1 &= ~(UCR1_TRDYEN | UCR1_RTSDEN | UCR1_RRDYEN);
 
-	ucr2 |= UCR2_RXEN;
+	ucr2 |= UCR2_RXEN | UCR2_TXEN;
 	ucr2 &= ~UCR2_ATEN;
 
 	imx_uart_writel(sport, ucr1, UCR1);
@@ -2183,70 +2163,6 @@ static struct uart_driver imx_uart_uart_driver = {
 	.cons           = IMX_CONSOLE,
 };
 
-#ifdef CONFIG_OF
-/*
- * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it
- * could successfully get all information from dt or a negative errno.
- */
-static int imx_uart_probe_dt(struct imx_port *sport,
-			     struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	sport->devdata = of_device_get_match_data(&pdev->dev);
-	if (!sport->devdata)
-		/* no device tree device */
-		return 1;
-
-	ret = of_alias_get_id(np, "serial");
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
-		return ret;
-	}
-	sport->port.line = ret;
-
-	if (of_get_property(np, "uart-has-rtscts", NULL) ||
-	    of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */)
-		sport->have_rtscts = 1;
-
-	if (of_get_property(np, "fsl,dte-mode", NULL))
-		sport->dte_mode = 1;
-
-	if (of_get_property(np, "rts-gpios", NULL))
-		sport->have_rtsgpio = 1;
-
-	if (of_get_property(np, "fsl,inverted-tx", NULL))
-		sport->inverted_tx = 1;
-
-	if (of_get_property(np, "fsl,inverted-rx", NULL))
-		sport->inverted_rx = 1;
-
-	return 0;
-}
-#else
-static inline int imx_uart_probe_dt(struct imx_port *sport,
-				    struct platform_device *pdev)
-{
-	return 1;
-}
-#endif
-
-static void imx_uart_probe_pdata(struct imx_port *sport,
-				 struct platform_device *pdev)
-{
-	struct imxuart_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
-	sport->port.line = pdev->id;
-	sport->devdata = (struct imx_uart_data	*) pdev->id_entry->driver_data;
-
-	if (!pdata)
-		return;
-
-	if (pdata->flags & IMXUART_HAVE_RTSCTS)
-		sport->have_rtscts = 1;
-}
-
 static enum hrtimer_restart imx_trigger_start_tx(struct hrtimer *t)
 {
 	struct imx_port *sport = container_of(t, struct imx_port, trigger_start_tx);
@@ -2275,6 +2191,7 @@ static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t)
 
 static int imx_uart_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct imx_port *sport;
 	void __iomem *base;
 	int ret = 0;
@@ -2286,11 +2203,30 @@ static int imx_uart_probe(struct platform_device *pdev)
 	if (!sport)
 		return -ENOMEM;
 
-	ret = imx_uart_probe_dt(sport, pdev);
-	if (ret > 0)
-		imx_uart_probe_pdata(sport, pdev);
-	else if (ret < 0)
+	sport->devdata = of_device_get_match_data(&pdev->dev);
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
 		return ret;
+	}
+	sport->port.line = ret;
+
+	if (of_get_property(np, "uart-has-rtscts", NULL) ||
+	    of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */)
+		sport->have_rtscts = 1;
+
+	if (of_get_property(np, "fsl,dte-mode", NULL))
+		sport->dte_mode = 1;
+
+	if (of_get_property(np, "rts-gpios", NULL))
+		sport->have_rtsgpio = 1;
+
+	if (of_get_property(np, "fsl,inverted-tx", NULL))
+		sport->inverted_tx = 1;
+
+	if (of_get_property(np, "fsl,inverted-rx", NULL))
+		sport->inverted_rx = 1;
 
 	if (sport->port.line >= ARRAY_SIZE(imx_uart_ports)) {
 		dev_err(&pdev->dev, "serial%d out of range\n",
@@ -2639,7 +2575,6 @@ static struct platform_driver imx_uart_platform_driver = {
 	.probe = imx_uart_probe,
 	.remove = imx_uart_remove,
 
-	.id_table = imx_uart_devtype,
 	.driver = {
 		.name = "imx-uart",
 		.of_match_table = imx_uart_dt_ids,
diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index c061a7b7bd23..b507a2cec926 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -397,10 +397,8 @@ static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch)
 		 * which in this case is the break signal.
 		 */
 		if (linestatus & error_mask)  {
-			u8 discard;
-
 			linestatus = 0;
-			discard = readb(&ch->ch_cls_uart->txrx);
+			readb(&ch->ch_cls_uart->txrx);
 			continue;
 		}
 
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 689774c073ca..512b77195e9f 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -607,7 +607,7 @@ void jsm_input(struct jsm_channel *ch)
 				 * Give the Linux ld the flags in the
 				 * format it likes.
 				 */
-				if (*(ch->ch_equeue +tail +i) & UART_LSR_BI)
+				if (*(ch->ch_equeue + tail + i) & UART_LSR_BI)
 					tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i),  TTY_BREAK);
 				else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE)
 					tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_PARITY);
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index b5898c932036..1fa098d7aec4 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -241,12 +241,11 @@ static unsigned int __serial_get_clock_div(unsigned long uartclk,
 
 static void __serial_uart_flush(struct uart_port *port)
 {
-	u32 tmp;
 	int cnt = 0;
 
 	while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) &&
 	       (cnt++ < FIFO_READ_LIMIT))
-		tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+		readl(LPC32XX_HSUART_FIFO(port->membase));
 }
 
 static void __serial_lpc32xx_rx(struct uart_port *port)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 21130af106bb..9795b2e8b0b2 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -15,8 +15,8 @@
 #include <linux/device.h>
 #include <linux/gpio/driver.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
@@ -267,7 +267,7 @@ struct max310x_one {
 	container_of(_port, struct max310x_one, port)
 
 struct max310x_port {
-	struct max310x_devtype	*devtype;
+	const struct max310x_devtype *devtype;
 	struct regmap		*regmap;
 	struct clk		*clk;
 #ifdef CONFIG_GPIOLIB
@@ -1269,11 +1269,10 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 }
 #endif
 
-static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
+static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype,
 			 struct regmap *regmap, int irq)
 {
 	int i, ret, fmin, fmax, freq, uartclk;
-	struct clk *clk_osc, *clk_xtal;
 	struct max310x_port *s;
 	bool xtal = false;
 
@@ -1287,23 +1286,24 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
 		return -ENOMEM;
 	}
 
-	clk_osc = devm_clk_get(dev, "osc");
-	clk_xtal = devm_clk_get(dev, "xtal");
-	if (!IS_ERR(clk_osc)) {
-		s->clk = clk_osc;
+	s->clk = devm_clk_get_optional(dev, "osc");
+	if (IS_ERR(s->clk))
+		return PTR_ERR(s->clk);
+	if (s->clk) {
 		fmin = 500000;
 		fmax = 35000000;
-	} else if (!IS_ERR(clk_xtal)) {
-		s->clk = clk_xtal;
-		fmin = 1000000;
-		fmax = 4000000;
-		xtal = true;
-	} else if (PTR_ERR(clk_osc) == -EPROBE_DEFER ||
-		   PTR_ERR(clk_xtal) == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
 	} else {
-		dev_err(dev, "Cannot get clock\n");
-		return -EINVAL;
+		s->clk = devm_clk_get_optional(dev, "xtal");
+		if (IS_ERR(s->clk))
+			return PTR_ERR(s->clk);
+		if (s->clk) {
+			fmin = 1000000;
+			fmax = 4000000;
+			xtal = true;
+		} else {
+			dev_err(dev, "Cannot get clock\n");
+			return -EINVAL;
+		}
 	}
 
 	ret = clk_prepare_enable(s->clk);
@@ -1478,7 +1478,7 @@ static struct regmap_config regcfg = {
 #ifdef CONFIG_SPI_MASTER
 static int max310x_spi_probe(struct spi_device *spi)
 {
-	struct max310x_devtype *devtype;
+	const struct max310x_devtype *devtype;
 	struct regmap *regmap;
 	int ret;
 
@@ -1490,18 +1490,9 @@ static int max310x_spi_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	if (spi->dev.of_node) {
-		const struct of_device_id *of_id =
-			of_match_device(max310x_dt_ids, &spi->dev);
-		if (!of_id)
-			return -ENODEV;
-
-		devtype = (struct max310x_devtype *)of_id->data;
-	} else {
-		const struct spi_device_id *id_entry = spi_get_device_id(spi);
-
-		devtype = (struct max310x_devtype *)id_entry->driver_data;
-	}
+	devtype = device_get_match_data(&spi->dev);
+	if (!devtype)
+		devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
 
 	regcfg.max_register = devtype->nr * 0x20 - 1;
 	regmap = devm_regmap_init_spi(spi, &regcfg);
@@ -1526,7 +1517,7 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table);
 static struct spi_driver max310x_spi_driver = {
 	.driver = {
 		.name		= MAX310X_NAME,
-		.of_match_table	= of_match_ptr(max310x_dt_ids),
+		.of_match_table	= max310x_dt_ids,
 		.pm		= &max310x_pm_ops,
 	},
 	.probe		= max310x_spi_probe,
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index d2c08b760f83..69eeef9edfa5 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -604,7 +604,6 @@ static int __init meson_serial_console_init(void)
 	register_console(&meson_serial_console);
 	return 0;
 }
-console_initcall(meson_serial_console_init);
 
 static void meson_serial_early_console_write(struct console *co,
 					     const char *s,
@@ -634,6 +633,9 @@ OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
 
 #define MESON_SERIAL_CONSOLE	(&meson_serial_console)
 #else
+static int __init meson_serial_console_init(void) {
+	return 0;
+}
 #define MESON_SERIAL_CONSOLE	NULL
 #endif
 
@@ -824,6 +826,10 @@ static int __init meson_uart_init(void)
 {
 	int ret;
 
+	ret = meson_serial_console_init();
+	if (ret)
+		return ret;
+	
 	ret = uart_register_driver(&meson_uart_driver);
 	if (ret)
 		return ret;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 87f005e5d2af..770c182e2208 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -426,7 +426,6 @@ static void msm_complete_tx_dma(void *args)
 	struct circ_buf *xmit = &port->state->xmit;
 	struct msm_dma *dma = &msm_port->tx_dma;
 	struct dma_tx_state state;
-	enum dma_status status;
 	unsigned long flags;
 	unsigned int count;
 	u32 val;
@@ -437,7 +436,7 @@ static void msm_complete_tx_dma(void *args)
 	if (!dma->count)
 		goto done;
 
-	status = dmaengine_tx_status(dma->chan, dma->cookie, &state);
+	dmaengine_tx_status(dma->chan, dma->cookie, &state);
 
 	dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir);
 
@@ -1525,7 +1524,7 @@ static void msm_poll_put_char(struct uart_port *port, unsigned char c)
 }
 #endif
 
-static struct uart_ops msm_uart_pops = {
+static const struct uart_ops msm_uart_pops = {
 	.tx_empty = msm_tx_empty,
 	.set_mctrl = msm_set_mctrl,
 	.get_mctrl = msm_get_mctrl,
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index b784323a6a7b..8ecf622602cb 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -443,24 +443,16 @@ struct mxs_auart_port {
 	bool			ms_irq_enabled;
 };
 
-static const struct platform_device_id mxs_auart_devtype[] = {
-	{ .name = "mxs-auart-imx23", .driver_data = IMX23_AUART },
-	{ .name = "mxs-auart-imx28", .driver_data = IMX28_AUART },
-	{ .name = "as-auart-asm9260", .driver_data = ASM9260_AUART },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(platform, mxs_auart_devtype);
-
 static const struct of_device_id mxs_auart_dt_ids[] = {
 	{
 		.compatible = "fsl,imx28-auart",
-		.data = &mxs_auart_devtype[IMX28_AUART]
+		.data = (const void *)IMX28_AUART
 	}, {
 		.compatible = "fsl,imx23-auart",
-		.data = &mxs_auart_devtype[IMX23_AUART]
+		.data = (const void *)IMX23_AUART
 	}, {
 		.compatible = "alphascale,asm9260-auart",
-		.data = &mxs_auart_devtype[ASM9260_AUART]
+		.data = (const void *)ASM9260_AUART
 	}, { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
@@ -1639,8 +1631,6 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
 
 static int mxs_auart_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *of_id =
-			of_match_device(mxs_auart_dt_ids, &pdev->dev);
 	struct mxs_auart_port *s;
 	u32 version;
 	int ret, irq;
@@ -1663,10 +1653,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (of_id) {
-		pdev->id_entry = of_id->data;
-		s->devtype = pdev->id_entry->driver_data;
-	}
+	s->devtype = (enum mxs_auart_type)of_device_get_match_data(&pdev->dev);
 
 	ret = mxs_get_clks(s, pdev);
 	if (ret)
diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h
index bb874e76810e..fa85b0de5c2f 100644
--- a/drivers/tty/serial/pmac_zilog.h
+++ b/drivers/tty/serial/pmac_zilog.h
@@ -362,10 +362,10 @@ static inline void zssync(struct uart_pmac_port *port)
 
 /* Misc macros */
 #define ZS_CLEARERR(port)    (write_zsreg(port, 0, ERR_RES))
-#define ZS_CLEARFIFO(port)   do { volatile unsigned char garbage; \
-				     garbage = read_zsdata(port); \
-				     garbage = read_zsdata(port); \
-				     garbage = read_zsdata(port); \
+#define ZS_CLEARFIFO(port)   do {                       \
+				     read_zsdata(port); \
+				     read_zsdata(port); \
+				     read_zsdata(port); \
 				} while(0)
 
 #define ZS_IS_CONS(UP)			((UP)->flags & PMACZILOG_FLAG_IS_CONS)
diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c
deleted file mode 100644
index 972d94e8d32b..000000000000
--- a/drivers/tty/serial/pnx8xxx_uart.c
+++ /dev/null
@@ -1,858 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * UART driver for PNX8XXX SoCs
- *
- * Author: Per Hallsmark per.hallsmark@mvista.com
- * Ported to 2.6 kernel by EmbeddedAlley
- * Reworked by Vitaly Wool <vitalywool@gmail.com>
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_pnx8xxx.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-/* We'll be using StrongARM sa1100 serial port major/minor */
-#define SERIAL_PNX8XXX_MAJOR	204
-#define MINOR_START		5
-
-#define NR_PORTS		2
-
-#define PNX8XXX_ISR_PASS_LIMIT	256
-
-/*
- * Convert from ignore_status_mask or read_status_mask to FIFO
- * and interrupt status bits
- */
-#define SM_TO_FIFO(x)	((x) >> 10)
-#define SM_TO_ISTAT(x)	((x) & 0x000001ff)
-#define FIFO_TO_SM(x)	((x) << 10)
-#define ISTAT_TO_SM(x)	((x) & 0x000001ff)
-
-/*
- * This is the size of our serial port register set.
- */
-#define UART_PORT_SIZE	0x1000
-
-/*
- * This determines how often we check the modem status signals
- * for any change.  They generally aren't connected to an IRQ
- * so we have to poll them.  We also check immediately before
- * filling the TX fifo incase CTS has been dropped.
- */
-#define MCTRL_TIMEOUT	(250*HZ/1000)
-
-extern struct pnx8xxx_port pnx8xxx_ports[];
-
-static inline int serial_in(struct pnx8xxx_port *sport, int offset)
-{
-	return (__raw_readl(sport->port.membase + offset));
-}
-
-static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value)
-{
-	__raw_writel(value, sport->port.membase + offset);
-}
-
-/*
- * Handle any change of modem status signal since we were last called.
- */
-static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
-{
-	unsigned int status, changed;
-
-	status = sport->port.ops->get_mctrl(&sport->port);
-	changed = status ^ sport->old_status;
-
-	if (changed == 0)
-		return;
-
-	sport->old_status = status;
-
-	if (changed & TIOCM_RI)
-		sport->port.icount.rng++;
-	if (changed & TIOCM_DSR)
-		sport->port.icount.dsr++;
-	if (changed & TIOCM_CAR)
-		uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
-	if (changed & TIOCM_CTS)
-		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
-
-	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
-}
-
-/*
- * This is our per-port timeout handler, for checking the
- * modem status signals.
- */
-static void pnx8xxx_timeout(struct timer_list *t)
-{
-	struct pnx8xxx_port *sport = from_timer(sport, t, timer);
-	unsigned long flags;
-
-	if (sport->port.state) {
-		spin_lock_irqsave(&sport->port.lock, flags);
-		pnx8xxx_mctrl_check(sport);
-		spin_unlock_irqrestore(&sport->port.lock, flags);
-
-		mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
-	}
-}
-
-/*
- * interrupts disabled on entry
- */
-static void pnx8xxx_stop_tx(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	u32 ien;
-
-	/* Disable TX intr */
-	ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX);
-
-	/* Clear all pending TX intr */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
-}
-
-/*
- * interrupts may not be disabled on entry
- */
-static void pnx8xxx_start_tx(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	u32 ien;
-
-	/* Clear all pending TX intr */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
-
-	/* Enable TX intr */
-	ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX);
-}
-
-/*
- * Interrupts enabled
- */
-static void pnx8xxx_stop_rx(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	u32 ien;
-
-	/* Disable RX intr */
-	ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX);
-
-	/* Clear all pending RX intr */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX);
-}
-
-/*
- * Set the modem control timer to fire immediately.
- */
-static void pnx8xxx_enable_ms(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	mod_timer(&sport->timer, jiffies);
-}
-
-static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
-{
-	unsigned int status, ch, flg;
-
-	status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
-		 ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
-	while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
-		ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
-
-		sport->port.icount.rx++;
-
-		flg = TTY_NORMAL;
-
-		/*
-		 * note that the error handling code is
-		 * out of the main execution path
-		 */
-		if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
-					PNX8XXX_UART_FIFO_RXPAR |
-					PNX8XXX_UART_FIFO_RXBRK) |
-			      ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
-			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
-				status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
-					FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
-				sport->port.icount.brk++;
-				if (uart_handle_break(&sport->port))
-					goto ignore_char;
-			} else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
-				sport->port.icount.parity++;
-			else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
-				sport->port.icount.frame++;
-			if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))
-				sport->port.icount.overrun++;
-
-			status &= sport->port.read_status_mask;
-
-			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
-				flg = TTY_PARITY;
-			else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
-				flg = TTY_FRAME;
-
-			sport->port.sysrq = 0;
-		}
-
-		if (uart_handle_sysrq_char(&sport->port, ch))
-			goto ignore_char;
-
-		uart_insert_char(&sport->port, status,
-				ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg);
-
-	ignore_char:
-		serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) |
-				PNX8XXX_UART_LCR_RX_NEXT);
-		status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
-			 ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
-	}
-
-	spin_unlock(&sport->port.lock);
-	tty_flip_buffer_push(&sport->port.state->port);
-	spin_lock(&sport->port.lock);
-}
-
-static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
-{
-	struct circ_buf *xmit = &sport->port.state->xmit;
-
-	if (sport->port.x_char) {
-		serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
-		sport->port.icount.tx++;
-		sport->port.x_char = 0;
-		return;
-	}
-
-	/*
-	 * Check the modem control lines before
-	 * transmitting anything.
-	 */
-	pnx8xxx_mctrl_check(sport);
-
-	if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
-		pnx8xxx_stop_tx(&sport->port);
-		return;
-	}
-
-	/*
-	 * TX while bytes available
-	 */
-	while (((serial_in(sport, PNX8XXX_FIFO) &
-					PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) {
-		serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		sport->port.icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-	}
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&sport->port);
-
-	if (uart_circ_empty(xmit))
-		pnx8xxx_stop_tx(&sport->port);
-}
-
-static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
-{
-	struct pnx8xxx_port *sport = dev_id;
-	unsigned int status;
-
-	spin_lock(&sport->port.lock);
-	/* Get the interrupts */
-	status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
-
-	/* Byte or break signal received */
-	if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
-		pnx8xxx_rx_chars(sport);
-
-	/* TX holding register empty - transmit a byte */
-	if (status & PNX8XXX_UART_INT_TX)
-		pnx8xxx_tx_chars(sport);
-
-	/* Clear the ISTAT register */
-	serial_out(sport, PNX8XXX_ICLR, status);
-
-	spin_unlock(&sport->port.lock);
-	return IRQ_HANDLED;
-}
-
-/*
- * Return TIOCSER_TEMT when transmitter is not busy.
- */
-static unsigned int pnx8xxx_tx_empty(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT;
-}
-
-static unsigned int pnx8xxx_get_mctrl(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	unsigned int mctrl = TIOCM_DSR;
-	unsigned int msr;
-
-	/* REVISIT */
-
-	msr = serial_in(sport, PNX8XXX_MCR);
-
-	mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0;
-	mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0;
-
-	return mctrl;
-}
-
-static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-#if	0	/* FIXME */
-	struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
-	unsigned int msr;
-#endif
-}
-
-/*
- * Interrupts always disabled.
- */
-static void pnx8xxx_break_ctl(struct uart_port *port, int break_state)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	unsigned long flags;
-	unsigned int lcr;
-
-	spin_lock_irqsave(&sport->port.lock, flags);
-	lcr = serial_in(sport, PNX8XXX_LCR);
-	if (break_state == -1)
-		lcr |= PNX8XXX_UART_LCR_TXBREAK;
-	else
-		lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
-	serial_out(sport, PNX8XXX_LCR, lcr);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
-}
-
-static int pnx8xxx_startup(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	int retval;
-
-	/*
-	 * Allocate the IRQ
-	 */
-	retval = request_irq(sport->port.irq, pnx8xxx_int, 0,
-			     "pnx8xxx-uart", sport);
-	if (retval)
-		return retval;
-
-	/*
-	 * Finally, clear and enable interrupts
-	 */
-
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
-			     PNX8XXX_UART_INT_ALLTX);
-
-	serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) |
-			    PNX8XXX_UART_INT_ALLRX |
-			    PNX8XXX_UART_INT_ALLTX);
-
-	/*
-	 * Enable modem status interrupts
-	 */
-	spin_lock_irq(&sport->port.lock);
-	pnx8xxx_enable_ms(&sport->port);
-	spin_unlock_irq(&sport->port.lock);
-
-	return 0;
-}
-
-static void pnx8xxx_shutdown(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	int lcr;
-
-	/*
-	 * Stop our timer.
-	 */
-	del_timer_sync(&sport->timer);
-
-	/*
-	 * Disable all interrupts
-	 */
-	serial_out(sport, PNX8XXX_IEN, 0);
-
-	/*
-	 * Reset the Tx and Rx FIFOS, disable the break condition
-	 */
-	lcr = serial_in(sport, PNX8XXX_LCR);
-	lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
-	lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST;
-	serial_out(sport, PNX8XXX_LCR, lcr);
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
-			     PNX8XXX_UART_INT_ALLTX);
-
-	/*
-	 * Free the interrupt
-	 */
-	free_irq(sport->port.irq, sport);
-}
-
-static void
-pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios,
-		   struct ktermios *old)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	unsigned long flags;
-	unsigned int lcr_fcr, old_ien, baud, quot;
-	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
-
-	/*
-	 * We only support CS7 and CS8.
-	 */
-	while ((termios->c_cflag & CSIZE) != CS7 &&
-	       (termios->c_cflag & CSIZE) != CS8) {
-		termios->c_cflag &= ~CSIZE;
-		termios->c_cflag |= old_csize;
-		old_csize = CS8;
-	}
-
-	if ((termios->c_cflag & CSIZE) == CS8)
-		lcr_fcr = PNX8XXX_UART_LCR_8BIT;
-	else
-		lcr_fcr = 0;
-
-	if (termios->c_cflag & CSTOPB)
-		lcr_fcr |= PNX8XXX_UART_LCR_2STOPB;
-	if (termios->c_cflag & PARENB) {
-		lcr_fcr |= PNX8XXX_UART_LCR_PAREN;
-		if (!(termios->c_cflag & PARODD))
-			lcr_fcr |= PNX8XXX_UART_LCR_PAREVN;
-	}
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-
-	spin_lock_irqsave(&sport->port.lock, flags);
-
-	sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) |
-				ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) |
-				ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
-	if (termios->c_iflag & INPCK)
-		sport->port.read_status_mask |=
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
-	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
-		sport->port.read_status_mask |=
-			ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
-
-	/*
-	 * Characters to ignore
-	 */
-	sport->port.ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		sport->port.ignore_status_mask |=
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
-	if (termios->c_iflag & IGNBRK) {
-		sport->port.ignore_status_mask |=
-			ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns too (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			sport->port.ignore_status_mask |=
-				ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN);
-	}
-
-	/*
-	 * ignore all characters if CREAD is not set
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		sport->port.ignore_status_mask |=
-			ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
-
-	del_timer_sync(&sport->timer);
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	/*
-	 * disable interrupts and drain transmitter
-	 */
-	old_ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
-					PNX8XXX_UART_INT_ALLRX));
-
-	while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA)
-		barrier();
-
-	/* then, disable everything */
-	serial_out(sport, PNX8XXX_IEN, 0);
-
-	/* Reset the Rx and Tx FIFOs too */
-	lcr_fcr |= PNX8XXX_UART_LCR_TX_RST;
-	lcr_fcr |= PNX8XXX_UART_LCR_RX_RST;
-
-	/* set the parity, stop bits and data size */
-	serial_out(sport, PNX8XXX_LCR, lcr_fcr);
-
-	/* set the baud rate */
-	quot -= 1;
-	serial_out(sport, PNX8XXX_BAUD, quot);
-
-	serial_out(sport, PNX8XXX_ICLR, -1);
-
-	serial_out(sport, PNX8XXX_IEN, old_ien);
-
-	if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
-		pnx8xxx_enable_ms(&sport->port);
-
-	spin_unlock_irqrestore(&sport->port.lock, flags);
-}
-
-static const char *pnx8xxx_type(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'.
- */
-static void pnx8xxx_release_port(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
-}
-
-/*
- * Request the memory region(s) being used by 'port'.
- */
-static int pnx8xxx_request_port(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
-			"pnx8xxx-uart") != NULL ? 0 : -EBUSY;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void pnx8xxx_config_port(struct uart_port *port, int flags)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	if (flags & UART_CONFIG_TYPE &&
-	    pnx8xxx_request_port(&sport->port) == 0)
-		sport->port.type = PORT_PNX8XXX;
-}
-
-/*
- * Verify the new serial_struct (for TIOCSSERIAL).
- * The only change we allow are to the flags and type, and
- * even then only between PORT_PNX8XXX and PORT_UNKNOWN
- */
-static int
-pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port,	port);
-	int ret = 0;
-
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX)
-		ret = -EINVAL;
-	if (sport->port.irq != ser->irq)
-		ret = -EINVAL;
-	if (ser->io_type != SERIAL_IO_MEM)
-		ret = -EINVAL;
-	if (sport->port.uartclk / 16 != ser->baud_base)
-		ret = -EINVAL;
-	if ((void *)sport->port.mapbase != ser->iomem_base)
-		ret = -EINVAL;
-	if (sport->port.iobase != ser->port)
-		ret = -EINVAL;
-	if (ser->hub6 != 0)
-		ret = -EINVAL;
-	return ret;
-}
-
-static const struct uart_ops pnx8xxx_pops = {
-	.tx_empty	= pnx8xxx_tx_empty,
-	.set_mctrl	= pnx8xxx_set_mctrl,
-	.get_mctrl	= pnx8xxx_get_mctrl,
-	.stop_tx	= pnx8xxx_stop_tx,
-	.start_tx	= pnx8xxx_start_tx,
-	.stop_rx	= pnx8xxx_stop_rx,
-	.enable_ms	= pnx8xxx_enable_ms,
-	.break_ctl	= pnx8xxx_break_ctl,
-	.startup	= pnx8xxx_startup,
-	.shutdown	= pnx8xxx_shutdown,
-	.set_termios	= pnx8xxx_set_termios,
-	.type		= pnx8xxx_type,
-	.release_port	= pnx8xxx_release_port,
-	.request_port	= pnx8xxx_request_port,
-	.config_port	= pnx8xxx_config_port,
-	.verify_port	= pnx8xxx_verify_port,
-};
-
-
-/*
- * Setup the PNX8XXX serial ports.
- *
- * Note also that we support "console=ttySx" where "x" is either 0 or 1.
- */
-static void __init pnx8xxx_init_ports(void)
-{
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-	first = 0;
-
-	for (i = 0; i < NR_PORTS; i++) {
-		timer_setup(&pnx8xxx_ports[i].timer, pnx8xxx_timeout, 0);
-		pnx8xxx_ports[i].port.ops = &pnx8xxx_pops;
-	}
-}
-
-#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE
-
-static void pnx8xxx_console_putchar(struct uart_port *port, int ch)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	int status;
-
-	do {
-		/* Wait for UART_TX register to empty */
-		status = serial_in(sport, PNX8XXX_FIFO);
-	} while (status & PNX8XXX_UART_FIFO_TXFIFO);
-	serial_out(sport, PNX8XXX_FIFO, ch);
-}
-
-/*
- * Interrupts are disabled on entering
- */static void
-pnx8xxx_console_write(struct console *co, const char *s, unsigned int count)
-{
-	struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index];
-	unsigned int old_ien, status;
-
-	/*
-	 *	First, save IEN and then disable interrupts
-	 */
-	old_ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
-					PNX8XXX_UART_INT_ALLRX));
-
-	uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar);
-
-	/*
-	 *	Finally, wait for transmitter to become empty
-	 *	and restore IEN
-	 */
-	do {
-		/* Wait for UART_TX register to empty */
-		status = serial_in(sport, PNX8XXX_FIFO);
-	} while (status & PNX8XXX_UART_FIFO_TXFIFO);
-
-	/* Clear TX and EMPTY interrupt */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX |
-			     PNX8XXX_UART_INT_EMPTY);
-
-	serial_out(sport, PNX8XXX_IEN, old_ien);
-}
-
-static int __init
-pnx8xxx_console_setup(struct console *co, char *options)
-{
-	struct pnx8xxx_port *sport;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index == -1 || co->index >= NR_PORTS)
-		co->index = 0;
-	sport = &pnx8xxx_ports[co->index];
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(&sport->port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver pnx8xxx_reg;
-static struct console pnx8xxx_console = {
-	.name		= "ttyS",
-	.write		= pnx8xxx_console_write,
-	.device		= uart_console_device,
-	.setup		= pnx8xxx_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &pnx8xxx_reg,
-};
-
-static int __init pnx8xxx_rs_console_init(void)
-{
-	pnx8xxx_init_ports();
-	register_console(&pnx8xxx_console);
-	return 0;
-}
-console_initcall(pnx8xxx_rs_console_init);
-
-#define PNX8XXX_CONSOLE	&pnx8xxx_console
-#else
-#define PNX8XXX_CONSOLE	NULL
-#endif
-
-static struct uart_driver pnx8xxx_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "ttyS",
-	.dev_name		= "ttyS",
-	.major			= SERIAL_PNX8XXX_MAJOR,
-	.minor			= MINOR_START,
-	.nr			= NR_PORTS,
-	.cons			= PNX8XXX_CONSOLE,
-};
-
-static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
-
-	return uart_suspend_port(&pnx8xxx_reg, &sport->port);
-}
-
-static int pnx8xxx_serial_resume(struct platform_device *pdev)
-{
-	struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
-
-	return uart_resume_port(&pnx8xxx_reg, &sport->port);
-}
-
-static int pnx8xxx_serial_probe(struct platform_device *pdev)
-{
-	struct resource *res = pdev->resource;
-	int i;
-
-	for (i = 0; i < pdev->num_resources; i++, res++) {
-		if (!(res->flags & IORESOURCE_MEM))
-			continue;
-
-		for (i = 0; i < NR_PORTS; i++) {
-			if (pnx8xxx_ports[i].port.mapbase != res->start)
-				continue;
-
-			pnx8xxx_ports[i].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PNX8XXX_CONSOLE);
-			pnx8xxx_ports[i].port.dev = &pdev->dev;
-			uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port);
-			platform_set_drvdata(pdev, &pnx8xxx_ports[i]);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int pnx8xxx_serial_remove(struct platform_device *pdev)
-{
-	struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
-
-	if (sport)
-		uart_remove_one_port(&pnx8xxx_reg, &sport->port);
-
-	return 0;
-}
-
-static struct platform_driver pnx8xxx_serial_driver = {
-	.driver		= {
-		.name	= "pnx8xxx-uart",
-	},
-	.probe		= pnx8xxx_serial_probe,
-	.remove		= pnx8xxx_serial_remove,
-	.suspend	= pnx8xxx_serial_suspend,
-	.resume		= pnx8xxx_serial_resume,
-};
-
-static int __init pnx8xxx_serial_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "Serial: PNX8XXX driver\n");
-
-	pnx8xxx_init_ports();
-
-	ret = uart_register_driver(&pnx8xxx_reg);
-	if (ret == 0) {
-		ret = platform_driver_register(&pnx8xxx_serial_driver);
-		if (ret)
-			uart_unregister_driver(&pnx8xxx_reg);
-	}
-	return ret;
-}
-
-static void __exit pnx8xxx_serial_exit(void)
-{
-	platform_driver_unregister(&pnx8xxx_serial_driver);
-	uart_unregister_driver(&pnx8xxx_reg);
-}
-
-module_init(pnx8xxx_serial_init);
-module_exit(pnx8xxx_serial_exit);
-
-MODULE_AUTHOR("Embedded Alley Solutions, Inc.");
-MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR);
-MODULE_ALIAS("platform:pnx8xxx-uart");
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index bd13014a1c53..bbae072a125d 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -75,12 +75,17 @@
 #define TEGRA_UART_FCR_IIR_FIFO_EN		0x40
 
 /**
- * tegra_uart_chip_data: SOC specific data.
+ * struct tegra_uart_chip_data: SOC specific data.
  *
  * @tx_fifo_full_status: Status flag available for checking tx fifo full.
  * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not.
  *			Tegra30 does not allow this.
  * @support_clk_src_div: Clock source support the clock divider.
+ * @fifo_mode_enable_status: Is FIFO mode enabled?
+ * @uart_max_port: Maximum number of UART ports
+ * @max_dma_burst_bytes: Maximum size of DMA bursts
+ * @error_tolerance_low_range: Lowest number in the error tolerance range
+ * @error_tolerance_high_range: Highest number in the error tolerance range
  */
 struct tegra_uart_chip_data {
 	bool	tx_fifo_full_status;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f41cba10b86b..828f9ad1be49 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1467,6 +1467,10 @@ static void uart_set_ldisc(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *uport;
+	struct tty_port *port = &state->port;
+
+	if (!tty_port_initialized(port))
+		return;
 
 	mutex_lock(&state->port.mutex);
 	uport = uart_port_check(state);
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index fb4781292d40..c41d8911ce95 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -207,7 +207,7 @@ struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx)
 			continue;
 
 		ret = gpiod_to_irq(gpios->gpio[i]);
-		if (ret <= 0) {
+		if (ret < 0) {
 			dev_err(port->dev,
 				"failed to find corresponding irq for %s (idx=%d, err=%d)\n",
 				mctrl_gpios_desc[i].name, idx, ret);
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 13eadcb8aec4..1066eebe3b28 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -144,12 +144,13 @@
  */
 
 /**
- * sifive_serial_port - driver-specific data extension to struct uart_port
+ * struct sifive_serial_port - driver-specific data extension to struct uart_port
  * @port: struct uart_port embedded in this struct
  * @dev: struct device *
  * @ier: shadowed copy of the interrupt enable register
  * @clkin_rate: input clock to the UART IP block.
  * @baud_rate: UART serial line rate (e.g., 115200 baud)
+ * @clk: reference to this device's clock
  * @clk_notifier: clock rate change notifier for upstream clock changes
  *
  * Configuration data specific to this SiFive UART.
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index ee6c7762d355..f4de32d3f2af 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -350,7 +350,6 @@ static void stm32_transmit_chars_dma(struct uart_port *port)
 	struct stm32_usart_offsets *ofs = &stm32port->info->ofs;
 	struct circ_buf *xmit = &port->state->xmit;
 	struct dma_async_tx_descriptor *desc = NULL;
-	dma_cookie_t cookie;
 	unsigned int count, i;
 
 	if (stm32port->tx_dma_busy)
@@ -394,7 +393,7 @@ static void stm32_transmit_chars_dma(struct uart_port *port)
 	desc->callback_param = port;
 
 	/* Push current DMA TX transaction in the pending queue */
-	cookie = dmaengine_submit(desc);
+	dmaengine_submit(desc);
 
 	/* Issue pending DMA TX requests */
 	dma_async_issue_pending(stm32port->tx_ch);
@@ -1087,7 +1086,6 @@ static int stm32_of_dma_rx_probe(struct stm32_port *stm32port,
 	struct device *dev = &pdev->dev;
 	struct dma_slave_config config;
 	struct dma_async_tx_descriptor *desc = NULL;
-	dma_cookie_t cookie;
 	int ret;
 
 	/* Request DMA RX channel */
@@ -1132,7 +1130,7 @@ static int stm32_of_dma_rx_probe(struct stm32_port *stm32port,
 	desc->callback_param = NULL;
 
 	/* Push current DMA transaction in the pending queue */
-	cookie = dmaengine_submit(desc);
+	dmaengine_submit(desc);
 
 	/* Issue pending DMA requests */
 	dma_async_issue_pending(stm32port->rx_ch);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 09379db613d8..f42ccc40ffa6 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -773,8 +773,8 @@ static int ulite_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0)
-		return -ENXIO;
+	if (irq < 0)
+		return irq;
 
 	pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
 	if (IS_ERR(pdata->clk)) {
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index a9b1ee27183a..a14c5d996473 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -192,6 +192,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
  * @baud:		Current baud rate
  * @clk_rate_change_nb:	Notifier block for clock changes
  * @quirks:		Flags for RXBS support.
+ * @cts_override:	Modem control state override
  */
 struct cdns_uart {
 	struct uart_port	*port;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
deleted file mode 100644
index c8324d58ef56..000000000000
--- a/drivers/tty/synclink.c
+++ /dev/null
@@ -1,7898 +0,0 @@
-// SPDX-License-Identifier: GPL-1.0+
-/*
- * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
- *
- * Device driver for Microgate SyncLink ISA and PCI
- * high speed multiprotocol serial adapters.
- *
- * written by Paul Fulghum for Microgate Corporation
- * paulkf@microgate.com
- *
- * Microgate and SyncLink are trademarks of Microgate Corporation
- *
- * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
- *
- * Original release 01/11/99
- *
- * This driver is primarily intended for use in synchronous
- * HDLC mode. Asynchronous mode is also provided.
- *
- * When operating in synchronous mode, each call to mgsl_write()
- * contains exactly one complete HDLC frame. Calling mgsl_put_char
- * will start assembling an HDLC frame that will not be sent until
- * mgsl_flush_chars or mgsl_write is called.
- * 
- * Synchronous receive data is reported as complete frames. To accomplish
- * this, the TTY flip buffer is bypassed (too small to hold largest
- * frame and may fragment frames) and the line discipline
- * receive entry point is called directly.
- *
- * This driver has been tested with a slightly modified ppp.c driver
- * for synchronous PPP.
- *
- * 2000/02/16
- * Added interface for syncppp.c driver (an alternate synchronous PPP
- * implementation that also supports Cisco HDLC). Each device instance
- * registers as a tty device AND a network device (if dosyncppp option
- * is set for the device). The functionality is determined by which
- * device interface is opened.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if defined(__i386__)
-#  define BREAKPOINT() asm("   int $3");
-#else
-#  define BREAKPOINT() { }
-#endif
-
-#define MAX_ISA_DEVICES 10
-#define MAX_PCI_DEVICES 10
-#define MAX_TOTAL_DEVICES 20
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/ioctl.h>
-#include <linux/synclink.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <linux/bitops.h>
-#include <asm/types.h>
-#include <linux/termios.h>
-#include <linux/workqueue.h>
-#include <linux/hdlc.h>
-#include <linux/dma-mapping.h>
-
-#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
-#define SYNCLINK_GENERIC_HDLC 1
-#else
-#define SYNCLINK_GENERIC_HDLC 0
-#endif
-
-#define GET_USER(error,value,addr) error = get_user(value,addr)
-#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
-#define PUT_USER(error,value,addr) error = put_user(value,addr)
-#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
-
-#include <linux/uaccess.h>
-
-#define RCLRVALUE 0xffff
-
-static MGSL_PARAMS default_params = {
-	MGSL_MODE_HDLC,			/* unsigned long mode */
-	0,				/* unsigned char loopback; */
-	HDLC_FLAG_UNDERRUN_ABORT15,	/* unsigned short flags; */
-	HDLC_ENCODING_NRZI_SPACE,	/* unsigned char encoding; */
-	0,				/* unsigned long clock_speed; */
-	0xff,				/* unsigned char addr_filter; */
-	HDLC_CRC_16_CCITT,		/* unsigned short crc_type; */
-	HDLC_PREAMBLE_LENGTH_8BITS,	/* unsigned char preamble_length; */
-	HDLC_PREAMBLE_PATTERN_NONE,	/* unsigned char preamble; */
-	9600,				/* unsigned long data_rate; */
-	8,				/* unsigned char data_bits; */
-	1,				/* unsigned char stop_bits; */
-	ASYNC_PARITY_NONE		/* unsigned char parity; */
-};
-
-#define SHARED_MEM_ADDRESS_SIZE 0x40000
-#define BUFFERLISTSIZE 4096
-#define DMABUFFERSIZE 4096
-#define MAXRXFRAMES 7
-
-typedef struct _DMABUFFERENTRY
-{
-	u32 phys_addr;	/* 32-bit flat physical address of data buffer */
-	volatile u16 count;	/* buffer size/data count */
-	volatile u16 status;	/* Control/status field */
-	volatile u16 rcc;	/* character count field */
-	u16 reserved;	/* padding required by 16C32 */
-	u32 link;	/* 32-bit flat link to next buffer entry */
-	char *virt_addr;	/* virtual address of data buffer */
-	u32 phys_entry;	/* physical address of this buffer entry */
-	dma_addr_t dma_addr;
-} DMABUFFERENTRY, *DMAPBUFFERENTRY;
-
-/* The queue of BH actions to be performed */
-
-#define BH_RECEIVE  1
-#define BH_TRANSMIT 2
-#define BH_STATUS   4
-
-#define IO_PIN_SHUTDOWN_LIMIT 100
-
-struct	_input_signal_events {
-	int	ri_up;	
-	int	ri_down;
-	int	dsr_up;
-	int	dsr_down;
-	int	dcd_up;
-	int	dcd_down;
-	int	cts_up;
-	int	cts_down;
-};
-
-/* transmit holding buffer definitions*/
-#define MAX_TX_HOLDING_BUFFERS 5
-struct tx_holding_buffer {
-	int	buffer_size;
-	unsigned char *	buffer;
-};
-
-
-/*
- * Device instance data structure
- */
- 
-struct mgsl_struct {
-	int			magic;
-	struct tty_port		port;
-	int			line;
-	int                     hw_version;
-	
-	struct mgsl_icount	icount;
-	
-	int			timeout;
-	int			x_char;		/* xon/xoff character */
-	u16			read_status_mask;
-	u16			ignore_status_mask;	
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	
-	wait_queue_head_t	status_event_wait_q;
-	wait_queue_head_t	event_wait_q;
-	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
-	struct mgsl_struct	*next_device;	/* device list link */
-	
-	spinlock_t irq_spinlock;		/* spinlock for synchronizing with ISR */
-	struct work_struct task;		/* task structure for scheduling bh */
-
-	u32 EventMask;			/* event trigger mask */
-	u32 RecordedEvents;		/* pending events */
-
-	u32 max_frame_size;		/* as set by device config */
-
-	u32 pending_bh;
-
-	bool bh_running;		/* Protection from multiple */
-	int isr_overflow;
-	bool bh_requested;
-	
-	int dcd_chkcount;		/* check counts to prevent */
-	int cts_chkcount;		/* too many IRQs if a signal */
-	int dsr_chkcount;		/* is floating */
-	int ri_chkcount;
-
-	char *buffer_list;		/* virtual address of Rx & Tx buffer lists */
-	u32 buffer_list_phys;
-	dma_addr_t buffer_list_dma_addr;
-
-	unsigned int rx_buffer_count;	/* count of total allocated Rx buffers */
-	DMABUFFERENTRY *rx_buffer_list;	/* list of receive buffer entries */
-	unsigned int current_rx_buffer;
-
-	int num_tx_dma_buffers;		/* number of tx dma frames required */
- 	int tx_dma_buffers_used;
-	unsigned int tx_buffer_count;	/* count of total allocated Tx buffers */
-	DMABUFFERENTRY *tx_buffer_list;	/* list of transmit buffer entries */
-	int start_tx_dma_buffer;	/* tx dma buffer to start tx dma operation */
-	int current_tx_buffer;          /* next tx dma buffer to be loaded */
-	
-	unsigned char *intermediate_rxbuffer;
-
-	int num_tx_holding_buffers;	/* number of tx holding buffer allocated */
-	int get_tx_holding_index;  	/* next tx holding buffer for adapter to load */
-	int put_tx_holding_index;  	/* next tx holding buffer to store user request */
-	int tx_holding_count;		/* number of tx holding buffers waiting */
-	struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
-
-	bool rx_enabled;
-	bool rx_overflow;
-	bool rx_rcc_underrun;
-
-	bool tx_enabled;
-	bool tx_active;
-	u32 idle_mode;
-
-	u16 cmr_value;
-	u16 tcsr_value;
-
-	char device_name[25];		/* device instance name */
-
-	unsigned char bus;		/* expansion bus number (zero based) */
-	unsigned char function;		/* PCI device number */
-
-	unsigned int io_base;		/* base I/O address of adapter */
-	unsigned int io_addr_size;	/* size of the I/O address range */
-	bool io_addr_requested;		/* true if I/O address requested */
-	
-	unsigned int irq_level;		/* interrupt level */
-	unsigned long irq_flags;
-	bool irq_requested;		/* true if IRQ requested */
-	
-	unsigned int dma_level;		/* DMA channel */
-	bool dma_requested;		/* true if dma channel requested */
-
-	u16 mbre_bit;
-	u16 loopback_bits;
-	u16 usc_idle_mode;
-
-	MGSL_PARAMS params;		/* communications parameters */
-
-	unsigned char serial_signals;	/* current serial signal states */
-
-	bool irq_occurred;		/* for diagnostics use */
-	unsigned int init_error;	/* Initialization startup error 		(DIAGS)	*/
-	int	fDiagnosticsmode;	/* Driver in Diagnostic mode?			(DIAGS)	*/
-
-	u32 last_mem_alloc;
-	unsigned char* memory_base;	/* shared memory address (PCI only) */
-	u32 phys_memory_base;
-	bool shared_mem_requested;
-
-	unsigned char* lcr_base;	/* local config registers (PCI only) */
-	u32 phys_lcr_base;
-	u32 lcr_offset;
-	bool lcr_mem_requested;
-
-	u32 misc_ctrl_value;
-	char *flag_buf;
-	bool drop_rts_on_tx_done;
-
-	bool loopmode_insert_requested;
-	bool loopmode_send_done_requested;
-	
-	struct	_input_signal_events	input_signal_events;
-
-	/* generic HDLC device parts */
-	int netcount;
-	spinlock_t netlock;
-
-#if SYNCLINK_GENERIC_HDLC
-	struct net_device *netdev;
-#endif
-};
-
-#define MGSL_MAGIC 0x5401
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#ifndef SERIAL_XMIT_SIZE
-#define SERIAL_XMIT_SIZE 4096
-#endif
-
-/*
- * These macros define the offsets used in calculating the
- * I/O address of the specified USC registers.
- */
-
-
-#define DCPIN 2		/* Bit 1 of I/O address */
-#define SDPIN 4		/* Bit 2 of I/O address */
-
-#define DCAR 0		/* DMA command/address register */
-#define CCAR SDPIN		/* channel command/address register */
-#define DATAREG DCPIN + SDPIN	/* serial data register */
-#define MSBONLY 0x41
-#define LSBONLY 0x40
-
-/*
- * These macros define the register address (ordinal number)
- * used for writing address/value pairs to the USC.
- */
-
-#define CMR	0x02	/* Channel mode Register */
-#define CCSR	0x04	/* Channel Command/status Register */
-#define CCR	0x06	/* Channel Control Register */
-#define PSR	0x08	/* Port status Register */
-#define PCR	0x0a	/* Port Control Register */
-#define TMDR	0x0c	/* Test mode Data Register */
-#define TMCR	0x0e	/* Test mode Control Register */
-#define CMCR	0x10	/* Clock mode Control Register */
-#define HCR	0x12	/* Hardware Configuration Register */
-#define IVR	0x14	/* Interrupt Vector Register */
-#define IOCR	0x16	/* Input/Output Control Register */
-#define ICR	0x18	/* Interrupt Control Register */
-#define DCCR	0x1a	/* Daisy Chain Control Register */
-#define MISR	0x1c	/* Misc Interrupt status Register */
-#define SICR	0x1e	/* status Interrupt Control Register */
-#define RDR	0x20	/* Receive Data Register */
-#define RMR	0x22	/* Receive mode Register */
-#define RCSR	0x24	/* Receive Command/status Register */
-#define RICR	0x26	/* Receive Interrupt Control Register */
-#define RSR	0x28	/* Receive Sync Register */
-#define RCLR	0x2a	/* Receive count Limit Register */
-#define RCCR	0x2c	/* Receive Character count Register */
-#define TC0R	0x2e	/* Time Constant 0 Register */
-#define TDR	0x30	/* Transmit Data Register */
-#define TMR	0x32	/* Transmit mode Register */
-#define TCSR	0x34	/* Transmit Command/status Register */
-#define TICR	0x36	/* Transmit Interrupt Control Register */
-#define TSR	0x38	/* Transmit Sync Register */
-#define TCLR	0x3a	/* Transmit count Limit Register */
-#define TCCR	0x3c	/* Transmit Character count Register */
-#define TC1R	0x3e	/* Time Constant 1 Register */
-
-
-/*
- * MACRO DEFINITIONS FOR DMA REGISTERS
- */
-
-#define DCR	0x06	/* DMA Control Register (shared) */
-#define DACR	0x08	/* DMA Array count Register (shared) */
-#define BDCR	0x12	/* Burst/Dwell Control Register (shared) */
-#define DIVR	0x14	/* DMA Interrupt Vector Register (shared) */	
-#define DICR	0x18	/* DMA Interrupt Control Register (shared) */
-#define CDIR	0x1a	/* Clear DMA Interrupt Register (shared) */
-#define SDIR	0x1c	/* Set DMA Interrupt Register (shared) */
-
-#define TDMR	0x02	/* Transmit DMA mode Register */
-#define TDIAR	0x1e	/* Transmit DMA Interrupt Arm Register */
-#define TBCR	0x2a	/* Transmit Byte count Register */
-#define TARL	0x2c	/* Transmit Address Register (low) */
-#define TARU	0x2e	/* Transmit Address Register (high) */
-#define NTBCR	0x3a	/* Next Transmit Byte count Register */
-#define NTARL	0x3c	/* Next Transmit Address Register (low) */
-#define NTARU	0x3e	/* Next Transmit Address Register (high) */
-
-#define RDMR	0x82	/* Receive DMA mode Register (non-shared) */
-#define RDIAR	0x9e	/* Receive DMA Interrupt Arm Register */
-#define RBCR	0xaa	/* Receive Byte count Register */
-#define RARL	0xac	/* Receive Address Register (low) */
-#define RARU	0xae	/* Receive Address Register (high) */
-#define NRBCR	0xba	/* Next Receive Byte count Register */
-#define NRARL	0xbc	/* Next Receive Address Register (low) */
-#define NRARU	0xbe	/* Next Receive Address Register (high) */
-
-
-/*
- * MACRO DEFINITIONS FOR MODEM STATUS BITS
- */
-
-#define MODEMSTATUS_DTR 0x80
-#define MODEMSTATUS_DSR 0x40
-#define MODEMSTATUS_RTS 0x20
-#define MODEMSTATUS_CTS 0x10
-#define MODEMSTATUS_RI  0x04
-#define MODEMSTATUS_DCD 0x01
-
-
-/*
- * Channel Command/Address Register (CCAR) Command Codes
- */
-
-#define RTCmd_Null			0x0000
-#define RTCmd_ResetHighestIus		0x1000
-#define RTCmd_TriggerChannelLoadDma	0x2000
-#define RTCmd_TriggerRxDma		0x2800
-#define RTCmd_TriggerTxDma		0x3000
-#define RTCmd_TriggerRxAndTxDma		0x3800
-#define RTCmd_PurgeRxFifo		0x4800
-#define RTCmd_PurgeTxFifo		0x5000
-#define RTCmd_PurgeRxAndTxFifo		0x5800
-#define RTCmd_LoadRcc			0x6800
-#define RTCmd_LoadTcc			0x7000
-#define RTCmd_LoadRccAndTcc		0x7800
-#define RTCmd_LoadTC0			0x8800
-#define RTCmd_LoadTC1			0x9000
-#define RTCmd_LoadTC0AndTC1		0x9800
-#define RTCmd_SerialDataLSBFirst	0xa000
-#define RTCmd_SerialDataMSBFirst	0xa800
-#define RTCmd_SelectBigEndian		0xb000
-#define RTCmd_SelectLittleEndian	0xb800
-
-
-/*
- * DMA Command/Address Register (DCAR) Command Codes
- */
-
-#define DmaCmd_Null			0x0000
-#define DmaCmd_ResetTxChannel		0x1000
-#define DmaCmd_ResetRxChannel		0x1200
-#define DmaCmd_StartTxChannel		0x2000
-#define DmaCmd_StartRxChannel		0x2200
-#define DmaCmd_ContinueTxChannel	0x3000
-#define DmaCmd_ContinueRxChannel	0x3200
-#define DmaCmd_PauseTxChannel		0x4000
-#define DmaCmd_PauseRxChannel		0x4200
-#define DmaCmd_AbortTxChannel		0x5000
-#define DmaCmd_AbortRxChannel		0x5200
-#define DmaCmd_InitTxChannel		0x7000
-#define DmaCmd_InitRxChannel		0x7200
-#define DmaCmd_ResetHighestDmaIus	0x8000
-#define DmaCmd_ResetAllChannels		0x9000
-#define DmaCmd_StartAllChannels		0xa000
-#define DmaCmd_ContinueAllChannels	0xb000
-#define DmaCmd_PauseAllChannels		0xc000
-#define DmaCmd_AbortAllChannels		0xd000
-#define DmaCmd_InitAllChannels		0xf000
-
-#define TCmd_Null			0x0000
-#define TCmd_ClearTxCRC			0x2000
-#define TCmd_SelectTicrTtsaData		0x4000
-#define TCmd_SelectTicrTxFifostatus	0x5000
-#define TCmd_SelectTicrIntLevel		0x6000
-#define TCmd_SelectTicrdma_level		0x7000
-#define TCmd_SendFrame			0x8000
-#define TCmd_SendAbort			0x9000
-#define TCmd_EnableDleInsertion		0xc000
-#define TCmd_DisableDleInsertion	0xd000
-#define TCmd_ClearEofEom		0xe000
-#define TCmd_SetEofEom			0xf000
-
-#define RCmd_Null			0x0000
-#define RCmd_ClearRxCRC			0x2000
-#define RCmd_EnterHuntmode		0x3000
-#define RCmd_SelectRicrRtsaData		0x4000
-#define RCmd_SelectRicrRxFifostatus	0x5000
-#define RCmd_SelectRicrIntLevel		0x6000
-#define RCmd_SelectRicrdma_level		0x7000
-
-/*
- * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
- */
- 
-#define RECEIVE_STATUS		BIT5
-#define RECEIVE_DATA		BIT4
-#define TRANSMIT_STATUS		BIT3
-#define TRANSMIT_DATA		BIT2
-#define IO_PIN			BIT1
-#define MISC			BIT0
-
-
-/*
- * Receive status Bits in Receive Command/status Register RCSR
- */
-
-#define RXSTATUS_SHORT_FRAME		BIT8
-#define RXSTATUS_CODE_VIOLATION		BIT8
-#define RXSTATUS_EXITED_HUNT		BIT7
-#define RXSTATUS_IDLE_RECEIVED		BIT6
-#define RXSTATUS_BREAK_RECEIVED		BIT5
-#define RXSTATUS_ABORT_RECEIVED		BIT5
-#define RXSTATUS_RXBOUND		BIT4
-#define RXSTATUS_CRC_ERROR		BIT3
-#define RXSTATUS_FRAMING_ERROR		BIT3
-#define RXSTATUS_ABORT			BIT2
-#define RXSTATUS_PARITY_ERROR		BIT2
-#define RXSTATUS_OVERRUN		BIT1
-#define RXSTATUS_DATA_AVAILABLE		BIT0
-#define RXSTATUS_ALL			0x01f6
-#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
-
-/*
- * Values for setting transmit idle mode in 
- * Transmit Control/status Register (TCSR)
- */
-#define IDLEMODE_FLAGS			0x0000
-#define IDLEMODE_ALT_ONE_ZERO		0x0100
-#define IDLEMODE_ZERO			0x0200
-#define IDLEMODE_ONE			0x0300
-#define IDLEMODE_ALT_MARK_SPACE		0x0500
-#define IDLEMODE_SPACE			0x0600
-#define IDLEMODE_MARK			0x0700
-#define IDLEMODE_MASK			0x0700
-
-/*
- * IUSC revision identifiers
- */
-#define	IUSC_SL1660			0x4d44
-#define IUSC_PRE_SL1660			0x4553
-
-/*
- * Transmit status Bits in Transmit Command/status Register (TCSR)
- */
-
-#define TCSR_PRESERVE			0x0F00
-
-#define TCSR_UNDERWAIT			BIT11
-#define TXSTATUS_PREAMBLE_SENT		BIT7
-#define TXSTATUS_IDLE_SENT		BIT6
-#define TXSTATUS_ABORT_SENT		BIT5
-#define TXSTATUS_EOF_SENT		BIT4
-#define TXSTATUS_EOM_SENT		BIT4
-#define TXSTATUS_CRC_SENT		BIT3
-#define TXSTATUS_ALL_SENT		BIT2
-#define TXSTATUS_UNDERRUN		BIT1
-#define TXSTATUS_FIFO_EMPTY		BIT0
-#define TXSTATUS_ALL			0x00fa
-#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
-				
-
-#define MISCSTATUS_RXC_LATCHED		BIT15
-#define MISCSTATUS_RXC			BIT14
-#define MISCSTATUS_TXC_LATCHED		BIT13
-#define MISCSTATUS_TXC			BIT12
-#define MISCSTATUS_RI_LATCHED		BIT11
-#define MISCSTATUS_RI			BIT10
-#define MISCSTATUS_DSR_LATCHED		BIT9
-#define MISCSTATUS_DSR			BIT8
-#define MISCSTATUS_DCD_LATCHED		BIT7
-#define MISCSTATUS_DCD			BIT6
-#define MISCSTATUS_CTS_LATCHED		BIT5
-#define MISCSTATUS_CTS			BIT4
-#define MISCSTATUS_RCC_UNDERRUN		BIT3
-#define MISCSTATUS_DPLL_NO_SYNC		BIT2
-#define MISCSTATUS_BRG1_ZERO		BIT1
-#define MISCSTATUS_BRG0_ZERO		BIT0
-
-#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
-#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
-
-#define SICR_RXC_ACTIVE			BIT15
-#define SICR_RXC_INACTIVE		BIT14
-#define SICR_RXC			(BIT15|BIT14)
-#define SICR_TXC_ACTIVE			BIT13
-#define SICR_TXC_INACTIVE		BIT12
-#define SICR_TXC			(BIT13|BIT12)
-#define SICR_RI_ACTIVE			BIT11
-#define SICR_RI_INACTIVE		BIT10
-#define SICR_RI				(BIT11|BIT10)
-#define SICR_DSR_ACTIVE			BIT9
-#define SICR_DSR_INACTIVE		BIT8
-#define SICR_DSR			(BIT9|BIT8)
-#define SICR_DCD_ACTIVE			BIT7
-#define SICR_DCD_INACTIVE		BIT6
-#define SICR_DCD			(BIT7|BIT6)
-#define SICR_CTS_ACTIVE			BIT5
-#define SICR_CTS_INACTIVE		BIT4
-#define SICR_CTS			(BIT5|BIT4)
-#define SICR_RCC_UNDERFLOW		BIT3
-#define SICR_DPLL_NO_SYNC		BIT2
-#define SICR_BRG1_ZERO			BIT1
-#define SICR_BRG0_ZERO			BIT0
-
-void usc_DisableMasterIrqBit( struct mgsl_struct *info );
-void usc_EnableMasterIrqBit( struct mgsl_struct *info );
-void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
-void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
-void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
-
-#define usc_EnableInterrupts( a, b ) \
-	usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
-
-#define usc_DisableInterrupts( a, b ) \
-	usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
-
-#define usc_EnableMasterIrqBit(a) \
-	usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
-
-#define usc_DisableMasterIrqBit(a) \
-	usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
-
-#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
-
-/*
- * Transmit status Bits in Transmit Control status Register (TCSR)
- * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
- */
-
-#define TXSTATUS_PREAMBLE_SENT	BIT7
-#define TXSTATUS_IDLE_SENT	BIT6
-#define TXSTATUS_ABORT_SENT	BIT5
-#define TXSTATUS_EOF		BIT4
-#define TXSTATUS_CRC_SENT	BIT3
-#define TXSTATUS_ALL_SENT	BIT2
-#define TXSTATUS_UNDERRUN	BIT1
-#define TXSTATUS_FIFO_EMPTY	BIT0
-
-#define DICR_MASTER		BIT15
-#define DICR_TRANSMIT		BIT0
-#define DICR_RECEIVE		BIT1
-
-#define usc_EnableDmaInterrupts(a,b) \
-	usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
-
-#define usc_DisableDmaInterrupts(a,b) \
-	usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
-
-#define usc_EnableStatusIrqs(a,b) \
-	usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
-
-#define usc_DisablestatusIrqs(a,b) \
-	usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
-
-/* Transmit status Bits in Transmit Control status Register (TCSR) */
-/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
-
-
-#define DISABLE_UNCONDITIONAL    0
-#define DISABLE_END_OF_FRAME     1
-#define ENABLE_UNCONDITIONAL     2
-#define ENABLE_AUTO_CTS          3
-#define ENABLE_AUTO_DCD          3
-#define usc_EnableTransmitter(a,b) \
-	usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
-#define usc_EnableReceiver(a,b) \
-	usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
-
-static u16  usc_InDmaReg( struct mgsl_struct *info, u16 Port );
-static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
-static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
-
-static u16  usc_InReg( struct mgsl_struct *info, u16 Port );
-static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
-static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
-void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
-void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
-
-#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
-#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
-
-#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
-
-static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
-static void usc_start_receiver( struct mgsl_struct *info );
-static void usc_stop_receiver( struct mgsl_struct *info );
-
-static void usc_start_transmitter( struct mgsl_struct *info );
-static void usc_stop_transmitter( struct mgsl_struct *info );
-static void usc_set_txidle( struct mgsl_struct *info );
-static void usc_load_txfifo( struct mgsl_struct *info );
-
-static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
-static void usc_enable_loopback( struct mgsl_struct *info, int enable );
-
-static void usc_get_serial_signals( struct mgsl_struct *info );
-static void usc_set_serial_signals( struct mgsl_struct *info );
-
-static void usc_reset( struct mgsl_struct *info );
-
-static void usc_set_sync_mode( struct mgsl_struct *info );
-static void usc_set_sdlc_mode( struct mgsl_struct *info );
-static void usc_set_async_mode( struct mgsl_struct *info );
-static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
-
-static void usc_loopback_frame( struct mgsl_struct *info );
-
-static void mgsl_tx_timeout(struct timer_list *t);
-
-
-static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
-static void usc_loopmode_insert_request( struct mgsl_struct * info );
-static int usc_loopmode_active( struct mgsl_struct * info);
-static void usc_loopmode_send_done( struct mgsl_struct * info );
-
-static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
-
-#if SYNCLINK_GENERIC_HDLC
-#define dev_to_port(D) (dev_to_hdlc(D)->priv)
-static void hdlcdev_tx_done(struct mgsl_struct *info);
-static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
-static int  hdlcdev_init(struct mgsl_struct *info);
-static void hdlcdev_exit(struct mgsl_struct *info);
-#endif
-
-/*
- * Defines a BUS descriptor value for the PCI adapter
- * local bus address ranges.
- */
-
-#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
-(0x00400020 + \
-((WrHold) << 30) + \
-((WrDly)  << 28) + \
-((RdDly)  << 26) + \
-((Nwdd)   << 20) + \
-((Nwad)   << 15) + \
-((Nxda)   << 13) + \
-((Nrdd)   << 11) + \
-((Nrad)   <<  6) )
-
-static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
-
-/*
- * Adapter diagnostic routines
- */
-static bool mgsl_register_test( struct mgsl_struct *info );
-static bool mgsl_irq_test( struct mgsl_struct *info );
-static bool mgsl_dma_test( struct mgsl_struct *info );
-static bool mgsl_memory_test( struct mgsl_struct *info );
-static int mgsl_adapter_test( struct mgsl_struct *info );
-
-/*
- * device and resource management routines
- */
-static int mgsl_claim_resources(struct mgsl_struct *info);
-static void mgsl_release_resources(struct mgsl_struct *info);
-static void mgsl_add_device(struct mgsl_struct *info);
-static struct mgsl_struct* mgsl_allocate_device(void);
-
-/*
- * DMA buffer manupulation functions.
- */
-static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
-static bool mgsl_get_rx_frame( struct mgsl_struct *info );
-static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
-static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
-static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
-static int num_free_tx_dma_buffers(struct mgsl_struct *info);
-static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
-static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
-
-/*
- * DMA and Shared Memory buffer allocation and formatting
- */
-static int  mgsl_allocate_dma_buffers(struct mgsl_struct *info);
-static void mgsl_free_dma_buffers(struct mgsl_struct *info);
-static int  mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
-static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
-static int  mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
-static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
-static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
-static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
-static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
-static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
-static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
-static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
-
-/*
- * Bottom half interrupt handlers
- */
-static void mgsl_bh_handler(struct work_struct *work);
-static void mgsl_bh_receive(struct mgsl_struct *info);
-static void mgsl_bh_transmit(struct mgsl_struct *info);
-static void mgsl_bh_status(struct mgsl_struct *info);
-
-/*
- * Interrupt handler routines and dispatch table.
- */
-static void mgsl_isr_null( struct mgsl_struct *info );
-static void mgsl_isr_transmit_data( struct mgsl_struct *info );
-static void mgsl_isr_receive_data( struct mgsl_struct *info );
-static void mgsl_isr_receive_status( struct mgsl_struct *info );
-static void mgsl_isr_transmit_status( struct mgsl_struct *info );
-static void mgsl_isr_io_pin( struct mgsl_struct *info );
-static void mgsl_isr_misc( struct mgsl_struct *info );
-static void mgsl_isr_receive_dma( struct mgsl_struct *info );
-static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
-
-typedef void (*isr_dispatch_func)(struct mgsl_struct *);
-
-static isr_dispatch_func UscIsrTable[7] =
-{
-	mgsl_isr_null,
-	mgsl_isr_misc,
-	mgsl_isr_io_pin,
-	mgsl_isr_transmit_data,
-	mgsl_isr_transmit_status,
-	mgsl_isr_receive_data,
-	mgsl_isr_receive_status
-};
-
-/*
- * ioctl call handlers
- */
-static int tiocmget(struct tty_struct *tty);
-static int tiocmset(struct tty_struct *tty,
-		    unsigned int set, unsigned int clear);
-static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
-	__user *user_icount);
-static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS  __user *user_params);
-static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS  __user *new_params);
-static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
-static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
-static int mgsl_txenable(struct mgsl_struct * info, int enable);
-static int mgsl_txabort(struct mgsl_struct * info);
-static int mgsl_rxenable(struct mgsl_struct * info, int enable);
-static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
-static int mgsl_loopmode_send_done( struct mgsl_struct * info );
-
-/* set non-zero on successful registration with PCI subsystem */
-static bool pci_registered;
-
-/*
- * Global linked list of SyncLink devices
- */
-static struct mgsl_struct *mgsl_device_list;
-static int mgsl_device_count;
-
-/*
- * Set this param to non-zero to load eax with the
- * .text section address and breakpoint on module load.
- * This is useful for use with gdb and add-symbol-file command.
- */
-static bool break_on_load;
-
-/*
- * Driver major number, defaults to zero to get auto
- * assigned major number. May be forced as module parameter.
- */
-static int ttymajor;
-
-/*
- * Array of user specified options for ISA adapters.
- */
-static int io[MAX_ISA_DEVICES];
-static int irq[MAX_ISA_DEVICES];
-static int dma[MAX_ISA_DEVICES];
-static int debug_level;
-static int maxframe[MAX_TOTAL_DEVICES];
-static int txdmabufs[MAX_TOTAL_DEVICES];
-static int txholdbufs[MAX_TOTAL_DEVICES];
-	
-module_param(break_on_load, bool, 0);
-module_param(ttymajor, int, 0);
-module_param_hw_array(io, int, ioport, NULL, 0);
-module_param_hw_array(irq, int, irq, NULL, 0);
-module_param_hw_array(dma, int, dma, NULL, 0);
-module_param(debug_level, int, 0);
-module_param_array(maxframe, int, NULL, 0);
-module_param_array(txdmabufs, int, NULL, 0);
-module_param_array(txholdbufs, int, NULL, 0);
-
-static char *driver_name = "SyncLink serial driver";
-static char *driver_version = "$Revision: 4.38 $";
-
-static int synclink_init_one (struct pci_dev *dev,
-				     const struct pci_device_id *ent);
-static void synclink_remove_one (struct pci_dev *dev);
-
-static const struct pci_device_id synclink_pci_tbl[] = {
-	{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0, }, /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
-
-MODULE_LICENSE("GPL");
-
-static struct pci_driver synclink_pci_driver = {
-	.name		= "synclink",
-	.id_table	= synclink_pci_tbl,
-	.probe		= synclink_init_one,
-	.remove		= synclink_remove_one,
-};
-
-static struct tty_driver *serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-
-static void mgsl_change_params(struct mgsl_struct *info);
-static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
-
-/*
- * 1st function defined in .text section. Calling this function in
- * init_module() followed by a breakpoint allows a remote debugger
- * (gdb) to get the .text address for the add-symbol-file command.
- * This allows remote debugging of dynamically loadable modules.
- */
-static void* mgsl_get_text_ptr(void)
-{
-	return mgsl_get_text_ptr;
-}
-
-static inline int mgsl_paranoia_check(struct mgsl_struct *info,
-					char *name, const char *routine)
-{
-#ifdef MGSL_PARANOIA_CHECK
-	static const char *badmagic =
-		"Warning: bad magic number for mgsl struct (%s) in %s\n";
-	static const char *badinfo =
-		"Warning: null mgsl_struct for (%s) in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != MGSL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#else
-	if (!info)
-		return 1;
-#endif
-	return 0;
-}
-
-/*
- * line discipline callback wrappers
- *
- * The wrappers maintain line discipline references
- * while calling into the line discipline.
- *
- * ldisc_receive_buf  - pass receive data to line discipline
- */
-
-static void ldisc_receive_buf(struct tty_struct *tty,
-			      const __u8 *data, char *flags, int count)
-{
-	struct tty_ldisc *ld;
-	if (!tty)
-		return;
-	ld = tty_ldisc_ref(tty);
-	if (ld) {
-		if (ld->ops->receive_buf)
-			ld->ops->receive_buf(tty, data, flags, count);
-		tty_ldisc_deref(ld);
-	}
-}
-
-/* mgsl_stop()		throttle (stop) transmitter
- * 	
- * Arguments:		tty	pointer to tty info structure
- * Return Value:	None
- */
-static void mgsl_stop(struct tty_struct *tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
-		return;
-	
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("mgsl_stop(%s)\n",info->device_name);	
-		
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if (info->tx_enabled)
-	 	usc_stop_transmitter(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-}	/* end of mgsl_stop() */
-
-/* mgsl_start()		release (start) transmitter
- * 	
- * Arguments:		tty	pointer to tty info structure
- * Return Value:	None
- */
-static void mgsl_start(struct tty_struct *tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
-		return;
-	
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("mgsl_start(%s)\n",info->device_name);	
-		
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if (!info->tx_enabled)
-	 	usc_start_transmitter(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-}	/* end of mgsl_start() */
-
-/*
- * Bottom half work queue access functions
- */
-
-/* mgsl_bh_action()	Return next bottom half action to perform.
- * Return Value:	BH action code or 0 if nothing to do.
- */
-static int mgsl_bh_action(struct mgsl_struct *info)
-{
-	unsigned long flags;
-	int rc = 0;
-	
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-
-	if (info->pending_bh & BH_RECEIVE) {
-		info->pending_bh &= ~BH_RECEIVE;
-		rc = BH_RECEIVE;
-	} else if (info->pending_bh & BH_TRANSMIT) {
-		info->pending_bh &= ~BH_TRANSMIT;
-		rc = BH_TRANSMIT;
-	} else if (info->pending_bh & BH_STATUS) {
-		info->pending_bh &= ~BH_STATUS;
-		rc = BH_STATUS;
-	}
-
-	if (!rc) {
-		/* Mark BH routine as complete */
-		info->bh_running = false;
-		info->bh_requested = false;
-	}
-	
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-	return rc;
-}
-
-/*
- * 	Perform bottom half processing of work items queued by ISR.
- */
-static void mgsl_bh_handler(struct work_struct *work)
-{
-	struct mgsl_struct *info =
-		container_of(work, struct mgsl_struct, task);
-	int action;
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
-			__FILE__,__LINE__,info->device_name);
-	
-	info->bh_running = true;
-
-	while((action = mgsl_bh_action(info)) != 0) {
-	
-		/* Process work item */
-		if ( debug_level >= DEBUG_LEVEL_BH )
-			printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
-				__FILE__,__LINE__,action);
-
-		switch (action) {
-		
-		case BH_RECEIVE:
-			mgsl_bh_receive(info);
-			break;
-		case BH_TRANSMIT:
-			mgsl_bh_transmit(info);
-			break;
-		case BH_STATUS:
-			mgsl_bh_status(info);
-			break;
-		default:
-			/* unknown work item ID */
-			printk("Unknown work item ID=%08X!\n", action);
-			break;
-		}
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
-			__FILE__,__LINE__,info->device_name);
-}
-
-static void mgsl_bh_receive(struct mgsl_struct *info)
-{
-	bool (*get_rx_frame)(struct mgsl_struct *info) =
-		(info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):mgsl_bh_receive(%s)\n",
-			__FILE__,__LINE__,info->device_name);
-	
-	do
-	{
-		if (info->rx_rcc_underrun) {
-			unsigned long flags;
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			usc_start_receiver(info);
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-			return;
-		}
-	} while(get_rx_frame(info));
-}
-
-static void mgsl_bh_transmit(struct mgsl_struct *info)
-{
-	struct tty_struct *tty = info->port.tty;
-	unsigned long flags;
-	
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
-			__FILE__,__LINE__,info->device_name);
-
-	if (tty)
-		tty_wakeup(tty);
-
-	/* if transmitter idle and loopmode_send_done_requested
-	 * then start echoing RxD to TxD
-	 */
-	spin_lock_irqsave(&info->irq_spinlock,flags);
- 	if ( !info->tx_active && info->loopmode_send_done_requested )
- 		usc_loopmode_send_done( info );
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-}
-
-static void mgsl_bh_status(struct mgsl_struct *info)
-{
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):mgsl_bh_status() entry on %s\n",
-			__FILE__,__LINE__,info->device_name);
-
-	info->ri_chkcount = 0;
-	info->dsr_chkcount = 0;
-	info->dcd_chkcount = 0;
-	info->cts_chkcount = 0;
-}
-
-/* mgsl_isr_receive_status()
- * 
- *	Service a receive status interrupt. The type of status
- *	interrupt is indicated by the state of the RCSR.
- *	This is only used for HDLC mode.
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_isr_receive_status( struct mgsl_struct *info )
-{
-	u16 status = usc_InReg( info, RCSR );
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
-			__FILE__,__LINE__,status);
-			
- 	if ( (status & RXSTATUS_ABORT_RECEIVED) && 
-		info->loopmode_insert_requested &&
- 		usc_loopmode_active(info) )
- 	{
-		++info->icount.rxabort;
-	 	info->loopmode_insert_requested = false;
- 
- 		/* clear CMR:13 to start echoing RxD to TxD */
-		info->cmr_value &= ~BIT13;
- 		usc_OutReg(info, CMR, info->cmr_value);
- 
-		/* disable received abort irq (no longer required) */
-	 	usc_OutReg(info, RICR,
- 			(usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
- 	}
-
-	if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) {
-		if (status & RXSTATUS_EXITED_HUNT)
-			info->icount.exithunt++;
-		if (status & RXSTATUS_IDLE_RECEIVED)
-			info->icount.rxidle++;
-		wake_up_interruptible(&info->event_wait_q);
-	}
-
-	if (status & RXSTATUS_OVERRUN){
-		info->icount.rxover++;
-		usc_process_rxoverrun_sync( info );
-	}
-
-	usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
-	usc_UnlatchRxstatusBits( info, status );
-
-}	/* end of mgsl_isr_receive_status() */
-
-/* mgsl_isr_transmit_status()
- * 
- * 	Service a transmit status interrupt
- *	HDLC mode :end of transmit frame
- *	Async mode:all data is sent
- * 	transmit status is indicated by bits in the TCSR.
- * 
- * Arguments:		info	       pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_isr_transmit_status( struct mgsl_struct *info )
-{
-	u16 status = usc_InReg( info, TCSR );
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
-			__FILE__,__LINE__,status);
-	
-	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
-	usc_UnlatchTxstatusBits( info, status );
-	
-	if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
-	{
-		/* finished sending HDLC abort. This may leave	*/
-		/* the TxFifo with data from the aborted frame	*/
-		/* so purge the TxFifo. Also shutdown the DMA	*/
-		/* channel in case there is data remaining in 	*/
-		/* the DMA buffer				*/
- 		usc_DmaCmd( info, DmaCmd_ResetTxChannel );
- 		usc_RTCmd( info, RTCmd_PurgeTxFifo );
-	}
- 
-	if ( status & TXSTATUS_EOF_SENT )
-		info->icount.txok++;
-	else if ( status & TXSTATUS_UNDERRUN )
-		info->icount.txunder++;
-	else if ( status & TXSTATUS_ABORT_SENT )
-		info->icount.txabort++;
-	else
-		info->icount.txunder++;
-			
-	info->tx_active = false;
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	del_timer(&info->tx_timer);	
-	
-	if ( info->drop_rts_on_tx_done ) {
-		usc_get_serial_signals( info );
-		if ( info->serial_signals & SerialSignal_RTS ) {
-			info->serial_signals &= ~SerialSignal_RTS;
-			usc_set_serial_signals( info );
-		}
-		info->drop_rts_on_tx_done = false;
-	}
-
-#if SYNCLINK_GENERIC_HDLC
-	if (info->netcount)
-		hdlcdev_tx_done(info);
-	else 
-#endif
-	{
-		if (info->port.tty->stopped || info->port.tty->hw_stopped) {
-			usc_stop_transmitter(info);
-			return;
-		}
-		info->pending_bh |= BH_TRANSMIT;
-	}
-
-}	/* end of mgsl_isr_transmit_status() */
-
-/* mgsl_isr_io_pin()
- * 
- * 	Service an Input/Output pin interrupt. The type of
- * 	interrupt is indicated by bits in the MISR
- * 	
- * Arguments:		info	       pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_isr_io_pin( struct mgsl_struct *info )
-{
- 	struct	mgsl_icount *icount;
-	u16 status = usc_InReg( info, MISR );
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
-			__FILE__,__LINE__,status);
-			
-	usc_ClearIrqPendingBits( info, IO_PIN );
-	usc_UnlatchIostatusBits( info, status );
-
-	if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
-	              MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
-		icount = &info->icount;
-		/* update input line counters */
-		if (status & MISCSTATUS_RI_LATCHED) {
-			if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
-				usc_DisablestatusIrqs(info,SICR_RI);
-			icount->rng++;
-			if ( status & MISCSTATUS_RI )
-				info->input_signal_events.ri_up++;	
-			else
-				info->input_signal_events.ri_down++;	
-		}
-		if (status & MISCSTATUS_DSR_LATCHED) {
-			if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
-				usc_DisablestatusIrqs(info,SICR_DSR);
-			icount->dsr++;
-			if ( status & MISCSTATUS_DSR )
-				info->input_signal_events.dsr_up++;
-			else
-				info->input_signal_events.dsr_down++;
-		}
-		if (status & MISCSTATUS_DCD_LATCHED) {
-			if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
-				usc_DisablestatusIrqs(info,SICR_DCD);
-			icount->dcd++;
-			if (status & MISCSTATUS_DCD) {
-				info->input_signal_events.dcd_up++;
-			} else
-				info->input_signal_events.dcd_down++;
-#if SYNCLINK_GENERIC_HDLC
-			if (info->netcount) {
-				if (status & MISCSTATUS_DCD)
-					netif_carrier_on(info->netdev);
-				else
-					netif_carrier_off(info->netdev);
-			}
-#endif
-		}
-		if (status & MISCSTATUS_CTS_LATCHED)
-		{
-			if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
-				usc_DisablestatusIrqs(info,SICR_CTS);
-			icount->cts++;
-			if ( status & MISCSTATUS_CTS )
-				info->input_signal_events.cts_up++;
-			else
-				info->input_signal_events.cts_down++;
-		}
-		wake_up_interruptible(&info->status_event_wait_q);
-		wake_up_interruptible(&info->event_wait_q);
-
-		if (tty_port_check_carrier(&info->port) &&
-		     (status & MISCSTATUS_DCD_LATCHED) ) {
-			if ( debug_level >= DEBUG_LEVEL_ISR )
-				printk("%s CD now %s...", info->device_name,
-				       (status & MISCSTATUS_DCD) ? "on" : "off");
-			if (status & MISCSTATUS_DCD)
-				wake_up_interruptible(&info->port.open_wait);
-			else {
-				if ( debug_level >= DEBUG_LEVEL_ISR )
-					printk("doing serial hangup...");
-				if (info->port.tty)
-					tty_hangup(info->port.tty);
-			}
-		}
-	
-		if (tty_port_cts_enabled(&info->port) &&
-		     (status & MISCSTATUS_CTS_LATCHED) ) {
-			if (info->port.tty->hw_stopped) {
-				if (status & MISCSTATUS_CTS) {
-					if ( debug_level >= DEBUG_LEVEL_ISR )
-						printk("CTS tx start...");
-					info->port.tty->hw_stopped = 0;
-					usc_start_transmitter(info);
-					info->pending_bh |= BH_TRANSMIT;
-					return;
-				}
-			} else {
-				if (!(status & MISCSTATUS_CTS)) {
-					if ( debug_level >= DEBUG_LEVEL_ISR )
-						printk("CTS tx stop...");
-					if (info->port.tty)
-						info->port.tty->hw_stopped = 1;
-					usc_stop_transmitter(info);
-				}
-			}
-		}
-	}
-
-	info->pending_bh |= BH_STATUS;
-	
-	/* for diagnostics set IRQ flag */
-	if ( status & MISCSTATUS_TXC_LATCHED ){
-		usc_OutReg( info, SICR,
-			(unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
-		usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
-		info->irq_occurred = true;
-	}
-
-}	/* end of mgsl_isr_io_pin() */
-
-/* mgsl_isr_transmit_data()
- * 
- * 	Service a transmit data interrupt (async mode only).
- * 
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_isr_transmit_data( struct mgsl_struct *info )
-{
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
-			__FILE__,__LINE__,info->xmit_cnt);
-			
-	usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
-	
-	if (info->port.tty->stopped || info->port.tty->hw_stopped) {
-		usc_stop_transmitter(info);
-		return;
-	}
-	
-	if ( info->xmit_cnt )
-		usc_load_txfifo( info );
-	else
-		info->tx_active = false;
-		
-	if (info->xmit_cnt < WAKEUP_CHARS)
-		info->pending_bh |= BH_TRANSMIT;
-
-}	/* end of mgsl_isr_transmit_data() */
-
-/* mgsl_isr_receive_data()
- * 
- * 	Service a receive data interrupt. This occurs
- * 	when operating in asynchronous interrupt transfer mode.
- *	The receive data FIFO is flushed to the receive data buffers. 
- * 
- * Arguments:		info		pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_isr_receive_data( struct mgsl_struct *info )
-{
-	int Fifocount;
-	u16 status;
-	int work = 0;
-	unsigned char DataByte;
- 	struct	mgsl_icount *icount = &info->icount;
-	
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk("%s(%d):mgsl_isr_receive_data\n",
-			__FILE__,__LINE__);
-
-	usc_ClearIrqPendingBits( info, RECEIVE_DATA );
-	
-	/* select FIFO status for RICR readback */
-	usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
-
-	/* clear the Wordstatus bit so that status readback */
-	/* only reflects the status of this byte */
-	usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
-
-	/* flush the receive FIFO */
-
-	while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
-		int flag;
-
-		/* read one byte from RxFIFO */
-		outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
-		      info->io_base + CCAR );
-		DataByte = inb( info->io_base + CCAR );
-
-		/* get the status of the received byte */
-		status = usc_InReg(info, RCSR);
-		if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
-				RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) )
-			usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
-		
-		icount->rx++;
-		
-		flag = 0;
-		if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
-				RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) {
-			printk("rxerr=%04X\n",status);
-			/* update error statistics */
-			if ( status & RXSTATUS_BREAK_RECEIVED ) {
-				status &= ~(RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR);
-				icount->brk++;
-			} else if (status & RXSTATUS_PARITY_ERROR)
-				icount->parity++;
-			else if (status & RXSTATUS_FRAMING_ERROR)
-				icount->frame++;
-			else if (status & RXSTATUS_OVERRUN) {
-				/* must issue purge fifo cmd before */
-				/* 16C32 accepts more receive chars */
-				usc_RTCmd(info,RTCmd_PurgeRxFifo);
-				icount->overrun++;
-			}
-
-			/* discard char if tty control flags say so */
-			if (status & info->ignore_status_mask)
-				continue;
-				
-			status &= info->read_status_mask;
-		
-			if (status & RXSTATUS_BREAK_RECEIVED) {
-				flag = TTY_BREAK;
-				if (info->port.flags & ASYNC_SAK)
-					do_SAK(info->port.tty);
-			} else if (status & RXSTATUS_PARITY_ERROR)
-				flag = TTY_PARITY;
-			else if (status & RXSTATUS_FRAMING_ERROR)
-				flag = TTY_FRAME;
-		}	/* end of if (error) */
-		tty_insert_flip_char(&info->port, DataByte, flag);
-		if (status & RXSTATUS_OVERRUN) {
-			/* Overrun is special, since it's
-			 * reported immediately, and doesn't
-			 * affect the current character
-			 */
-			work += tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
-		}
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_ISR ) {
-		printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
-			__FILE__,__LINE__,icount->rx,icount->brk,
-			icount->parity,icount->frame,icount->overrun);
-	}
-			
-	if(work)
-		tty_flip_buffer_push(&info->port);
-}
-
-/* mgsl_isr_misc()
- * 
- * 	Service a miscellaneous interrupt source.
- * 	
- * Arguments:		info		pointer to device extension (instance data)
- * Return Value:	None
- */
-static void mgsl_isr_misc( struct mgsl_struct *info )
-{
-	u16 status = usc_InReg( info, MISR );
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk("%s(%d):mgsl_isr_misc status=%04X\n",
-			__FILE__,__LINE__,status);
-			
-	if ((status & MISCSTATUS_RCC_UNDERRUN) &&
-	    (info->params.mode == MGSL_MODE_HDLC)) {
-
-		/* turn off receiver and rx DMA */
-		usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
-		usc_DmaCmd(info, DmaCmd_ResetRxChannel);
-		usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
-		usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS);
-		usc_DisableInterrupts(info, RECEIVE_DATA | RECEIVE_STATUS);
-
-		/* schedule BH handler to restart receiver */
-		info->pending_bh |= BH_RECEIVE;
-		info->rx_rcc_underrun = true;
-	}
-
-	usc_ClearIrqPendingBits( info, MISC );
-	usc_UnlatchMiscstatusBits( info, status );
-
-}	/* end of mgsl_isr_misc() */
-
-/* mgsl_isr_null()
- *
- * 	Services undefined interrupt vectors from the
- * 	USC. (hence this function SHOULD never be called)
- * 
- * Arguments:		info		pointer to device extension (instance data)
- * Return Value:	None
- */
-static void mgsl_isr_null( struct mgsl_struct *info )
-{
-
-}	/* end of mgsl_isr_null() */
-
-/* mgsl_isr_receive_dma()
- * 
- * 	Service a receive DMA channel interrupt.
- * 	For this driver there are two sources of receive DMA interrupts
- * 	as identified in the Receive DMA mode Register (RDMR):
- * 
- * 	BIT3	EOA/EOL		End of List, all receive buffers in receive
- * 				buffer list have been filled (no more free buffers
- * 				available). The DMA controller has shut down.
- * 
- * 	BIT2	EOB		End of Buffer. This interrupt occurs when a receive
- * 				DMA buffer is terminated in response to completion
- * 				of a good frame or a frame with errors. The status
- * 				of the frame is stored in the buffer entry in the
- * 				list of receive buffer entries.
- * 
- * Arguments:		info		pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_isr_receive_dma( struct mgsl_struct *info )
-{
-	u16 status;
-	
-	/* clear interrupt pending and IUS bit for Rx DMA IRQ */
-	usc_OutDmaReg( info, CDIR, BIT9 | BIT1 );
-
-	/* Read the receive DMA status to identify interrupt type. */
-	/* This also clears the status bits. */
-	status = usc_InDmaReg( info, RDMR );
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
-			__FILE__,__LINE__,info->device_name,status);
-			
-	info->pending_bh |= BH_RECEIVE;
-	
-	if ( status & BIT3 ) {
-		info->rx_overflow = true;
-		info->icount.buf_overrun++;
-	}
-
-}	/* end of mgsl_isr_receive_dma() */
-
-/* mgsl_isr_transmit_dma()
- *
- *	This function services a transmit DMA channel interrupt.
- *
- *	For this driver there is one source of transmit DMA interrupts
- *	as identified in the Transmit DMA Mode Register (TDMR):
- *
- *     	BIT2  EOB       End of Buffer. This interrupt occurs when a
- *     			transmit DMA buffer has been emptied.
- *
- *     	The driver maintains enough transmit DMA buffers to hold at least
- *     	one max frame size transmit frame. When operating in a buffered
- *     	transmit mode, there may be enough transmit DMA buffers to hold at
- *     	least two or more max frame size frames. On an EOB condition,
- *     	determine if there are any queued transmit buffers and copy into
- *     	transmit DMA buffers if we have room.
- *
- * Arguments:		info		pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
-{
-	u16 status;
-
-	/* clear interrupt pending and IUS bit for Tx DMA IRQ */
-	usc_OutDmaReg(info, CDIR, BIT8 | BIT0 );
-
-	/* Read the transmit DMA status to identify interrupt type. */
-	/* This also clears the status bits. */
-
-	status = usc_InDmaReg( info, TDMR );
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
-			__FILE__,__LINE__,info->device_name,status);
-
-	if ( status & BIT2 ) {
-		--info->tx_dma_buffers_used;
-
-		/* if there are transmit frames queued,
-		 *  try to load the next one
-		 */
-		if ( load_next_tx_holding_buffer(info) ) {
-			/* if call returns non-zero value, we have
-			 * at least one free tx holding buffer
-			 */
-			info->pending_bh |= BH_TRANSMIT;
-		}
-	}
-
-}	/* end of mgsl_isr_transmit_dma() */
-
-/* mgsl_interrupt()
- * 
- * 	Interrupt service routine entry point.
- * 	
- * Arguments:
- * 
- * 	irq		interrupt number that caused interrupt
- * 	dev_id		device ID supplied during interrupt registration
- * 	
- * Return Value: None
- */
-static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
-{
-	struct mgsl_struct *info = dev_id;
-	u16 UscVector;
-	u16 DmaVector;
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
-			__FILE__, __LINE__, info->irq_level);
-
-	spin_lock(&info->irq_spinlock);
-
-	for(;;) {
-		/* Read the interrupt vectors from hardware. */
-		UscVector = usc_InReg(info, IVR) >> 9;
-		DmaVector = usc_InDmaReg(info, DIVR);
-		
-		if ( debug_level >= DEBUG_LEVEL_ISR )	
-			printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
-				__FILE__,__LINE__,info->device_name,UscVector,DmaVector);
-			
-		if ( !UscVector && !DmaVector )
-			break;
-			
-		/* Dispatch interrupt vector */
-		if ( UscVector )
-			(*UscIsrTable[UscVector])(info);
-		else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
-			mgsl_isr_transmit_dma(info);
-		else
-			mgsl_isr_receive_dma(info);
-
-		if ( info->isr_overflow ) {
-			printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
-				__FILE__, __LINE__, info->device_name, info->irq_level);
-			usc_DisableMasterIrqBit(info);
-			usc_DisableDmaInterrupts(info,DICR_MASTER);
-			break;
-		}
-	}
-	
-	/* Request bottom half processing if there's something 
-	 * for it to do and the bh is not already running
-	 */
-
-	if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
-		if ( debug_level >= DEBUG_LEVEL_ISR )	
-			printk("%s(%d):%s queueing bh task.\n",
-				__FILE__,__LINE__,info->device_name);
-		schedule_work(&info->task);
-		info->bh_requested = true;
-	}
-
-	spin_unlock(&info->irq_spinlock);
-	
-	if ( debug_level >= DEBUG_LEVEL_ISR )	
-		printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
-			__FILE__, __LINE__, info->irq_level);
-
-	return IRQ_HANDLED;
-}	/* end of mgsl_interrupt() */
-
-/* startup()
- * 
- * 	Initialize and start device.
- * 	
- * Arguments:		info	pointer to device instance data
- * Return Value:	0 if success, otherwise error code
- */
-static int startup(struct mgsl_struct * info)
-{
-	int retval = 0;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
-
-	if (tty_port_initialized(&info->port))
-		return 0;
-
-	if (!info->xmit_buf) {
-		/* allocate a page of memory for a transmit buffer */
-		info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
-		if (!info->xmit_buf) {
-			printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
-				__FILE__,__LINE__,info->device_name);
-			return -ENOMEM;
-		}
-	}
-
-	info->pending_bh = 0;
-	
-	memset(&info->icount, 0, sizeof(info->icount));
-
-	timer_setup(&info->tx_timer, mgsl_tx_timeout, 0);
-	
-	/* Allocate and claim adapter resources */
-	retval = mgsl_claim_resources(info);
-	
-	/* perform existence check and diagnostics */
-	if ( !retval )
-		retval = mgsl_adapter_test(info);
-		
-	if ( retval ) {
-  		if (capable(CAP_SYS_ADMIN) && info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		mgsl_release_resources(info);
-  		return retval;
-  	}
-
-	/* program hardware for current parameters */
-	mgsl_change_params(info);
-
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	tty_port_set_initialized(&info->port, 1);
-
-	return 0;
-}	/* end of startup() */
-
-/* shutdown()
- *
- * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void shutdown(struct mgsl_struct * info)
-{
-	unsigned long flags;
-
-	if (!tty_port_initialized(&info->port))
-		return;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_shutdown(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	/* clear status wait queue because status changes */
-	/* can't happen after shutting down the hardware */
-	wake_up_interruptible(&info->status_event_wait_q);
-	wake_up_interruptible(&info->event_wait_q);
-
-	del_timer_sync(&info->tx_timer);
-
-	if (info->xmit_buf) {
-		free_page((unsigned long) info->xmit_buf);
-		info->xmit_buf = NULL;
-	}
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	usc_DisableMasterIrqBit(info);
-	usc_stop_receiver(info);
-	usc_stop_transmitter(info);
-	usc_DisableInterrupts(info,RECEIVE_DATA | RECEIVE_STATUS |
-		TRANSMIT_DATA | TRANSMIT_STATUS | IO_PIN | MISC );
-	usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
-
-	/* Disable DMAEN (Port 7, Bit 14) */
-	/* This disconnects the DMA request signal from the ISA bus */
-	/* on the ISA adapter. This has no effect for the PCI adapter */
-	usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
-
-	/* Disable INTEN (Port 6, Bit12) */
-	/* This disconnects the IRQ request signal to the ISA bus */
-	/* on the ISA adapter. This has no effect for the PCI adapter */
-	usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
-
-	if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-		usc_set_serial_signals(info);
-	}
-
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	mgsl_release_resources(info);
-
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	tty_port_set_initialized(&info->port, 0);
-}	/* end of shutdown() */
-
-static void mgsl_program_hw(struct mgsl_struct *info)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	
-	usc_stop_receiver(info);
-	usc_stop_transmitter(info);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	
-	if (info->params.mode == MGSL_MODE_HDLC ||
-	    info->params.mode == MGSL_MODE_RAW ||
-	    info->netcount)
-		usc_set_sync_mode(info);
-	else
-		usc_set_async_mode(info);
-		
-	usc_set_serial_signals(info);
-	
-	info->dcd_chkcount = 0;
-	info->cts_chkcount = 0;
-	info->ri_chkcount = 0;
-	info->dsr_chkcount = 0;
-
-	usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
-	usc_EnableInterrupts(info, IO_PIN);
-	usc_get_serial_signals(info);
-		
-	if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
-		usc_start_receiver(info);
-		
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-}
-
-/* Reconfigure adapter based on new parameters
- */
-static void mgsl_change_params(struct mgsl_struct *info)
-{
-	unsigned cflag;
-	int bits_per_char;
-
-	if (!info->port.tty)
-		return;
-		
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_change_params(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-			 
-	cflag = info->port.tty->termios.c_cflag;
-
-	/* if B0 rate (hangup) specified then negate RTS and DTR */
-	/* otherwise assert RTS and DTR */
- 	if (cflag & CBAUD)
-		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
-	else
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-	
-	/* byte size and parity */
-	
-	switch (cflag & CSIZE) {
-	      case CS5: info->params.data_bits = 5; break;
-	      case CS6: info->params.data_bits = 6; break;
-	      case CS7: info->params.data_bits = 7; break;
-	      case CS8: info->params.data_bits = 8; break;
-	      /* Never happens, but GCC is too dumb to figure it out */
-	      default:  info->params.data_bits = 7; break;
-	      }
-	      
-	if (cflag & CSTOPB)
-		info->params.stop_bits = 2;
-	else
-		info->params.stop_bits = 1;
-
-	info->params.parity = ASYNC_PARITY_NONE;
-	if (cflag & PARENB) {
-		if (cflag & PARODD)
-			info->params.parity = ASYNC_PARITY_ODD;
-		else
-			info->params.parity = ASYNC_PARITY_EVEN;
-#ifdef CMSPAR
-		if (cflag & CMSPAR)
-			info->params.parity = ASYNC_PARITY_SPACE;
-#endif
-	}
-
-	/* calculate number of jiffies to transmit a full
-	 * FIFO (32 bytes) at specified data rate
-	 */
-	bits_per_char = info->params.data_bits + 
-			info->params.stop_bits + 1;
-
-	/* if port data rate is set to 460800 or less then
-	 * allow tty settings to override, otherwise keep the
-	 * current data rate.
-	 */
-	if (info->params.data_rate <= 460800)
-		info->params.data_rate = tty_get_baud_rate(info->port.tty);
-	
-	if ( info->params.data_rate ) {
-		info->timeout = (32*HZ*bits_per_char) / 
-				info->params.data_rate;
-	}
-	info->timeout += HZ/50;		/* Add .02 seconds of slop */
-
-	tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
-	tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
-
-	/* process tty input control flags */
-	
-	info->read_status_mask = RXSTATUS_OVERRUN;
-	if (I_INPCK(info->port.tty))
-		info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- 		info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
-	
-	if (I_IGNPAR(info->port.tty))
-		info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
-	if (I_IGNBRK(info->port.tty)) {
-		info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
-		/* If ignoring parity and break indicators, ignore 
-		 * overruns too.  (For real raw support).
-		 */
-		if (I_IGNPAR(info->port.tty))
-			info->ignore_status_mask |= RXSTATUS_OVERRUN;
-	}
-
-	mgsl_program_hw(info);
-
-}	/* end of mgsl_change_params() */
-
-/* mgsl_put_char()
- * 
- * 	Add a character to the transmit buffer.
- * 	
- * Arguments:		tty	pointer to tty information structure
- * 			ch	character to add to transmit buffer
- * 		
- * Return Value:	None
- */
-static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	int ret = 0;
-
-	if (debug_level >= DEBUG_LEVEL_INFO) {
-		printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
-			__FILE__, __LINE__, ch, info->device_name);
-	}		
-	
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
-		return 0;
-
-	if (!info->xmit_buf)
-		return 0;
-
-	spin_lock_irqsave(&info->irq_spinlock, flags);
-	
-	if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
-		if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
-			info->xmit_buf[info->xmit_head++] = ch;
-			info->xmit_head &= SERIAL_XMIT_SIZE-1;
-			info->xmit_cnt++;
-			ret = 1;
-		}
-	}
-	spin_unlock_irqrestore(&info->irq_spinlock, flags);
-	return ret;
-	
-}	/* end of mgsl_put_char() */
-
-/* mgsl_flush_chars()
- * 
- * 	Enable transmitter so remaining characters in the
- * 	transmit buffer are sent.
- * 	
- * Arguments:		tty	pointer to tty information structure
- * Return Value:	None
- */
-static void mgsl_flush_chars(struct tty_struct *tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-				
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
-			__FILE__,__LINE__,info->device_name,info->xmit_cnt);
-	
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
-		return;
-
-	if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-	    !info->xmit_buf)
-		return;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
-			__FILE__,__LINE__,info->device_name );
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	
-	if (!info->tx_active) {
-		if ( (info->params.mode == MGSL_MODE_HDLC ||
-			info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
-			/* operating in synchronous (frame oriented) mode */
-			/* copy data from circular xmit_buf to */
-			/* transmit DMA buffer. */
-			mgsl_load_tx_dma_buffer(info,
-				 info->xmit_buf,info->xmit_cnt);
-		}
-	 	usc_start_transmitter(info);
-	}
-	
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-}	/* end of mgsl_flush_chars() */
-
-/* mgsl_write()
- * 
- * 	Send a block of data
- * 	
- * Arguments:
- * 
- * 	tty		pointer to tty information structure
- * 	buf		pointer to buffer containing send data
- * 	count		size of send data in bytes
- * 	
- * Return Value:	number of characters written
- */
-static int mgsl_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	int	c, ret = 0;
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):mgsl_write(%s) count=%d\n",
-			__FILE__,__LINE__,info->device_name,count);
-	
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
-		goto cleanup;
-
-	if (!info->xmit_buf)
-		goto cleanup;
-
-	if ( info->params.mode == MGSL_MODE_HDLC ||
-			info->params.mode == MGSL_MODE_RAW ) {
-		/* operating in synchronous (frame oriented) mode */
-		if (info->tx_active) {
-
-			if ( info->params.mode == MGSL_MODE_HDLC ) {
-				ret = 0;
-				goto cleanup;
-			}
-			/* transmitter is actively sending data -
-			 * if we have multiple transmit dma and
-			 * holding buffers, attempt to queue this
-			 * frame for transmission at a later time.
-			 */
-			if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
-				/* no tx holding buffers available */
-				ret = 0;
-				goto cleanup;
-			}
-
-			/* queue transmit frame request */
-			ret = count;
-			save_tx_buffer_request(info,buf,count);
-
-			/* if we have sufficient tx dma buffers,
-			 * load the next buffered tx request
-			 */
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			load_next_tx_holding_buffer(info);
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-			goto cleanup;
-		}
-	
-		/* if operating in HDLC LoopMode and the adapter  */
-		/* has yet to be inserted into the loop, we can't */
-		/* transmit					  */
-
-		if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
-			!usc_loopmode_active(info) )
-		{
-			ret = 0;
-			goto cleanup;
-		}
-
-		if ( info->xmit_cnt ) {
-			/* Send accumulated from send_char() calls */
-			/* as frame and wait before accepting more data. */
-			ret = 0;
-			
-			/* copy data from circular xmit_buf to */
-			/* transmit DMA buffer. */
-			mgsl_load_tx_dma_buffer(info,
-				info->xmit_buf,info->xmit_cnt);
-			if ( debug_level >= DEBUG_LEVEL_INFO )
-				printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
-					__FILE__,__LINE__,info->device_name);
-		} else {
-			if ( debug_level >= DEBUG_LEVEL_INFO )
-				printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
-					__FILE__,__LINE__,info->device_name);
-			ret = count;
-			info->xmit_cnt = count;
-			mgsl_load_tx_dma_buffer(info,buf,count);
-		}
-	} else {
-		while (1) {
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			c = min_t(int, count,
-				min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-				    SERIAL_XMIT_SIZE - info->xmit_head));
-			if (c <= 0) {
-				spin_unlock_irqrestore(&info->irq_spinlock,flags);
-				break;
-			}
-			memcpy(info->xmit_buf + info->xmit_head, buf, c);
-			info->xmit_head = ((info->xmit_head + c) &
-					   (SERIAL_XMIT_SIZE-1));
-			info->xmit_cnt += c;
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-			buf += c;
-			count -= c;
-			ret += c;
-		}
-	}	
-	
- 	if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		if (!info->tx_active)
-		 	usc_start_transmitter(info);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
- 	}
-cleanup:	
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):mgsl_write(%s) returning=%d\n",
-			__FILE__,__LINE__,info->device_name,ret);
-			
-	return ret;
-	
-}	/* end of mgsl_write() */
-
-/* mgsl_write_room()
- *
- *	Return the count of free bytes in transmit buffer
- * 	
- * Arguments:		tty	pointer to tty info structure
- * Return Value:	None
- */
-static int mgsl_write_room(struct tty_struct *tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	int	ret;
-				
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
-		return 0;
-	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-		
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_write_room(%s)=%d\n",
-			 __FILE__,__LINE__, info->device_name,ret );
-			 
-	if ( info->params.mode == MGSL_MODE_HDLC ||
-		info->params.mode == MGSL_MODE_RAW ) {
-		/* operating in synchronous (frame oriented) mode */
-		if ( info->tx_active )
-			return 0;
-		else
-			return HDLC_MAX_FRAME_SIZE;
-	}
-	
-	return ret;
-	
-}	/* end of mgsl_write_room() */
-
-/* mgsl_chars_in_buffer()
- *
- *	Return the count of bytes in transmit buffer
- * 	
- * Arguments:		tty	pointer to tty info structure
- * Return Value:	None
- */
-static int mgsl_chars_in_buffer(struct tty_struct *tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-			 
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-			 
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
-		return 0;
-		
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
-			 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
-			 
-	if ( info->params.mode == MGSL_MODE_HDLC ||
-		info->params.mode == MGSL_MODE_RAW ) {
-		/* operating in synchronous (frame oriented) mode */
-		if ( info->tx_active )
-			return info->max_frame_size;
-		else
-			return 0;
-	}
-			 
-	return info->xmit_cnt;
-}	/* end of mgsl_chars_in_buffer() */
-
-/* mgsl_flush_buffer()
- *
- *	Discard all data in the send buffer
- * 	
- * Arguments:		tty	pointer to tty info structure
- * Return Value:	None
- */
-static void mgsl_flush_buffer(struct tty_struct *tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
-			 __FILE__,__LINE__, info->device_name );
-	
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
-		return;
-		
-	spin_lock_irqsave(&info->irq_spinlock,flags); 
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	del_timer(&info->tx_timer);	
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-	tty_wakeup(tty);
-}
-
-/* mgsl_send_xchar()
- *
- *	Send a high-priority XON/XOFF character
- * 	
- * Arguments:		tty	pointer to tty info structure
- *			ch	character to send
- * Return Value:	None
- */
-static void mgsl_send_xchar(struct tty_struct *tty, char ch)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
-			 __FILE__,__LINE__, info->device_name, ch );
-			 
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
-		return;
-
-	info->x_char = ch;
-	if (ch) {
-		/* Make sure transmit interrupts are on */
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		if (!info->tx_enabled)
-		 	usc_start_transmitter(info);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	}
-}	/* end of mgsl_send_xchar() */
-
-/* mgsl_throttle()
- * 
- * 	Signal remote device to throttle send data (our receive data)
- * 	
- * Arguments:		tty	pointer to tty info structure
- * Return Value:	None
- */
-static void mgsl_throttle(struct tty_struct * tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_throttle(%s) entry\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
-		return;
-	
-	if (I_IXOFF(tty))
-		mgsl_send_xchar(tty, STOP_CHAR(tty));
-
-	if (C_CRTSCTS(tty)) {
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		info->serial_signals &= ~SerialSignal_RTS;
-	 	usc_set_serial_signals(info);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	}
-}	/* end of mgsl_throttle() */
-
-/* mgsl_unthrottle()
- * 
- * 	Signal remote device to stop throttling send data (our receive data)
- * 	
- * Arguments:		tty	pointer to tty info structure
- * Return Value:	None
- */
-static void mgsl_unthrottle(struct tty_struct * tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_unthrottle(%s) entry\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
-		return;
-	
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			mgsl_send_xchar(tty, START_CHAR(tty));
-	}
-
-	if (C_CRTSCTS(tty)) {
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		info->serial_signals |= SerialSignal_RTS;
-	 	usc_set_serial_signals(info);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	}
-	
-}	/* end of mgsl_unthrottle() */
-
-/* mgsl_get_stats()
- * 
- * 	get the current serial parameters information
- *
- * Arguments:	info		pointer to device instance data
- * 		user_icount	pointer to buffer to hold returned stats
- * 	
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
-{
-	int err;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_get_params(%s)\n",
-			 __FILE__,__LINE__, info->device_name);
-			
-	if (!user_icount) {
-		memset(&info->icount, 0, sizeof(info->icount));
-	} else {
-		mutex_lock(&info->port.mutex);
-		COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
-		mutex_unlock(&info->port.mutex);
-		if (err)
-			return -EFAULT;
-	}
-	
-	return 0;
-	
-}	/* end of mgsl_get_stats() */
-
-/* mgsl_get_params()
- * 
- * 	get the current serial parameters information
- *
- * Arguments:	info		pointer to device instance data
- * 		user_params	pointer to buffer to hold returned params
- * 	
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
-{
-	int err;
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_get_params(%s)\n",
-			 __FILE__,__LINE__, info->device_name);
-			
-	mutex_lock(&info->port.mutex);
-	COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
-	mutex_unlock(&info->port.mutex);
-	if (err) {
-		if ( debug_level >= DEBUG_LEVEL_INFO )
-			printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
-				__FILE__,__LINE__,info->device_name);
-		return -EFAULT;
-	}
-	
-	return 0;
-	
-}	/* end of mgsl_get_params() */
-
-/* mgsl_set_params()
- * 
- * 	set the serial parameters
- * 	
- * Arguments:
- * 
- * 	info		pointer to device instance data
- * 	new_params	user buffer containing new serial params
- *
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
-{
- 	unsigned long flags;
-	MGSL_PARAMS tmp_params;
-	int err;
- 
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
-			info->device_name );
-	COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
-	if (err) {
-		if ( debug_level >= DEBUG_LEVEL_INFO )
-			printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
-				__FILE__,__LINE__,info->device_name);
-		return -EFAULT;
-	}
-	
-	mutex_lock(&info->port.mutex);
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
- 	mgsl_change_params(info);
-	mutex_unlock(&info->port.mutex);
-	
-	return 0;
-	
-}	/* end of mgsl_set_params() */
-
-/* mgsl_get_txidle()
- * 
- * 	get the current transmit idle mode
- *
- * Arguments:	info		pointer to device instance data
- * 		idle_mode	pointer to buffer to hold returned idle mode
- * 	
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
-{
-	int err;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
-			 __FILE__,__LINE__, info->device_name, info->idle_mode);
-			
-	COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
-	if (err) {
-		if ( debug_level >= DEBUG_LEVEL_INFO )
-			printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
-				__FILE__,__LINE__,info->device_name);
-		return -EFAULT;
-	}
-	
-	return 0;
-	
-}	/* end of mgsl_get_txidle() */
-
-/* mgsl_set_txidle()	service ioctl to set transmit idle mode
- * 	
- * Arguments:	 	info		pointer to device instance data
- * 			idle_mode	new idle mode
- *
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
-{
- 	unsigned long flags;
- 
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
-			info->device_name, idle_mode );
-			
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	info->idle_mode = idle_mode;
-	usc_set_txidle( info );
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	return 0;
-	
-}	/* end of mgsl_set_txidle() */
-
-/* mgsl_txenable()
- * 
- * 	enable or disable the transmitter
- * 	
- * Arguments:
- * 
- * 	info		pointer to device instance data
- * 	enable		1 = enable, 0 = disable
- *
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_txenable(struct mgsl_struct * info, int enable)
-{
- 	unsigned long flags;
- 
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
-			info->device_name, enable);
-			
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if ( enable ) {
-		if ( !info->tx_enabled ) {
-
-			usc_start_transmitter(info);
-			/*--------------------------------------------------
-			 * if HDLC/SDLC Loop mode, attempt to insert the
-			 * station in the 'loop' by setting CMR:13. Upon
-			 * receipt of the next GoAhead (RxAbort) sequence,
-			 * the OnLoop indicator (CCSR:7) should go active
-			 * to indicate that we are on the loop
-			 *--------------------------------------------------*/
-			if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
-				usc_loopmode_insert_request( info );
-		}
-	} else {
-		if ( info->tx_enabled )
-			usc_stop_transmitter(info);
-	}
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	return 0;
-	
-}	/* end of mgsl_txenable() */
-
-/* mgsl_txabort()	abort send HDLC frame
- * 	
- * Arguments:	 	info		pointer to device instance data
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_txabort(struct mgsl_struct * info)
-{
- 	unsigned long flags;
- 
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
-			info->device_name);
-			
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
-	{
-		if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
-			usc_loopmode_cancel_transmit( info );
-		else
-			usc_TCmd(info,TCmd_SendAbort);
-	}
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	return 0;
-	
-}	/* end of mgsl_txabort() */
-
-/* mgsl_rxenable() 	enable or disable the receiver
- * 	
- * Arguments:	 	info		pointer to device instance data
- * 			enable		1 = enable, 0 = disable
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_rxenable(struct mgsl_struct * info, int enable)
-{
- 	unsigned long flags;
- 
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
-			info->device_name, enable);
-			
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if ( enable ) {
-		if ( !info->rx_enabled )
-			usc_start_receiver(info);
-	} else {
-		if ( info->rx_enabled )
-			usc_stop_receiver(info);
-	}
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	return 0;
-	
-}	/* end of mgsl_rxenable() */
-
-/* mgsl_wait_event() 	wait for specified event to occur
- * 	
- * Arguments:	 	info	pointer to device instance data
- * 			mask	pointer to bitmask of events to wait for
- * Return Value:	0 	if successful and bit mask updated with
- *				of events triggerred,
- * 			otherwise error code
- */
-static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
-{
- 	unsigned long flags;
-	int s;
-	int rc=0;
-	struct mgsl_icount cprev, cnow;
-	int events;
-	int mask;
-	struct	_input_signal_events oldsigs, newsigs;
-	DECLARE_WAITQUEUE(wait, current);
-
-	COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
-	if (rc) {
-		return  -EFAULT;
-	}
-		 
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
-			info->device_name, mask);
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-
-	/* return immediately if state matches requested events */
-	usc_get_serial_signals(info);
-	s = info->serial_signals;
-	events = mask &
-		( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
- 		  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
-		  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
-		  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
-	if (events) {
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-		goto exit;
-	}
-
-	/* save current irq counts */
-	cprev = info->icount;
-	oldsigs = info->input_signal_events;
-	
-	/* enable hunt and idle irqs if needed */
-	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
-		u16 oldreg = usc_InReg(info,RICR);
-		u16 newreg = oldreg +
-			 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
-			 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
-		if (oldreg != newreg)
-			usc_OutReg(info, RICR, newreg);
-	}
-	
-	set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(&info->event_wait_q, &wait);
-	
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-
-	for(;;) {
-		schedule();
-		if (signal_pending(current)) {
-			rc = -ERESTARTSYS;
-			break;
-		}
-			
-		/* get current irq counts */
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		cnow = info->icount;
-		newsigs = info->input_signal_events;
-		set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-		/* if no change, wait aborted for some reason */
-		if (newsigs.dsr_up   == oldsigs.dsr_up   &&
-		    newsigs.dsr_down == oldsigs.dsr_down &&
-		    newsigs.dcd_up   == oldsigs.dcd_up   &&
-		    newsigs.dcd_down == oldsigs.dcd_down &&
-		    newsigs.cts_up   == oldsigs.cts_up   &&
-		    newsigs.cts_down == oldsigs.cts_down &&
-		    newsigs.ri_up    == oldsigs.ri_up    &&
-		    newsigs.ri_down  == oldsigs.ri_down  &&
-		    cnow.exithunt    == cprev.exithunt   &&
-		    cnow.rxidle      == cprev.rxidle) {
-			rc = -EIO;
-			break;
-		}
-
-		events = mask &
-			( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
-			(newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
-			(newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
-			(newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
-			(newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
-			(newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
-			(newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
-			(newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
-			(cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
-			  (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
-		if (events)
-			break;
-		
-		cprev = cnow;
-		oldsigs = newsigs;
-	}
-	
-	remove_wait_queue(&info->event_wait_q, &wait);
-	set_current_state(TASK_RUNNING);
-
-	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		if (!waitqueue_active(&info->event_wait_q)) {
-			/* disable enable exit hunt mode/idle rcvd IRQs */
-			usc_OutReg(info, RICR, usc_InReg(info,RICR) &
-				~(RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED));
-		}
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	}
-exit:
-	if ( rc == 0 )
-		PUT_USER(rc, events, mask_ptr);
-		
-	return rc;
-	
-}	/* end of mgsl_wait_event() */
-
-static int modem_input_wait(struct mgsl_struct *info,int arg)
-{
- 	unsigned long flags;
-	int rc;
-	struct mgsl_icount cprev, cnow;
-	DECLARE_WAITQUEUE(wait, current);
-
-	/* save current irq counts */
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	cprev = info->icount;
-	add_wait_queue(&info->status_event_wait_q, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	for(;;) {
-		schedule();
-		if (signal_pending(current)) {
-			rc = -ERESTARTSYS;
-			break;
-		}
-
-		/* get new irq counts */
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		cnow = info->icount;
-		set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-		/* if no change, wait aborted for some reason */
-		if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-		    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
-			rc = -EIO;
-			break;
-		}
-
-		/* check for change in caller specified modem input */
-		if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
-		    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
-		    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
-		    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
-			rc = 0;
-			break;
-		}
-
-		cprev = cnow;
-	}
-	remove_wait_queue(&info->status_event_wait_q, &wait);
-	set_current_state(TASK_RUNNING);
-	return rc;
-}
-
-/* return the state of the serial control and status signals
- */
-static int tiocmget(struct tty_struct *tty)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned int result;
- 	unsigned long flags;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
- 	usc_get_serial_signals(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
-		((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
-		((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
-		((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
-		((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
-		((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s tiocmget() value=%08X\n",
-			 __FILE__,__LINE__, info->device_name, result );
-	return result;
-}
-
-/* set modem control signals (DTR/RTS)
- */
-static int tiocmset(struct tty_struct *tty,
-				    unsigned int set, unsigned int clear)
-{
-	struct mgsl_struct *info = tty->driver_data;
- 	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s tiocmset(%x,%x)\n",
-			__FILE__,__LINE__,info->device_name, set, clear);
-
-	if (set & TIOCM_RTS)
-		info->serial_signals |= SerialSignal_RTS;
-	if (set & TIOCM_DTR)
-		info->serial_signals |= SerialSignal_DTR;
-	if (clear & TIOCM_RTS)
-		info->serial_signals &= ~SerialSignal_RTS;
-	if (clear & TIOCM_DTR)
-		info->serial_signals &= ~SerialSignal_DTR;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
- 	usc_set_serial_signals(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	return 0;
-}
-
-/* mgsl_break()		Set or clear transmit break condition
- *
- * Arguments:		tty		pointer to tty instance data
- *			break_state	-1=set break condition, 0=clear
- * Return Value:	error code
- */
-static int mgsl_break(struct tty_struct *tty, int break_state)
-{
-	struct mgsl_struct * info = tty->driver_data;
-	unsigned long flags;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_break(%s,%d)\n",
-			 __FILE__,__LINE__, info->device_name, break_state);
-			 
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
-		return -EINVAL;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
- 	if (break_state == -1)
-		usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
-	else 
-		usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	return 0;
-	
-}	/* end of mgsl_break() */
-
-/*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- *     RI where only 0->1 is counted.
- */
-static int msgl_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-
-{
-	struct mgsl_struct * info = tty->driver_data;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	cnow = info->icount;
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-	return 0;
-}
-
-/* mgsl_ioctl()	Service an IOCTL request
- * 	
- * Arguments:
- * 
- * 	tty	pointer to tty instance data
- * 	cmd	IOCTL command code
- * 	arg	command argument/context
- * 	
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg)
-{
-	struct mgsl_struct * info = tty->driver_data;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
-			info->device_name, cmd );
-	
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
-		return -ENODEV;
-
-	if (cmd != TIOCMIWAIT) {
-		if (tty_io_error(tty))
-		    return -EIO;
-	}
-
-	return mgsl_ioctl_common(info, cmd, arg);
-}
-
-static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	
-	switch (cmd) {
-		case MGSL_IOCGPARAMS:
-			return mgsl_get_params(info, argp);
-		case MGSL_IOCSPARAMS:
-			return mgsl_set_params(info, argp);
-		case MGSL_IOCGTXIDLE:
-			return mgsl_get_txidle(info, argp);
-		case MGSL_IOCSTXIDLE:
-			return mgsl_set_txidle(info,(int)arg);
-		case MGSL_IOCTXENABLE:
-			return mgsl_txenable(info,(int)arg);
-		case MGSL_IOCRXENABLE:
-			return mgsl_rxenable(info,(int)arg);
-		case MGSL_IOCTXABORT:
-			return mgsl_txabort(info);
-		case MGSL_IOCGSTATS:
-			return mgsl_get_stats(info, argp);
-		case MGSL_IOCWAITEVENT:
-			return mgsl_wait_event(info, argp);
-		case MGSL_IOCLOOPTXDONE:
-			return mgsl_loopmode_send_done(info);
-		/* Wait for modem input (DCD,RI,DSR,CTS) change
-		 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
-		 */
-		case TIOCMIWAIT:
-			return modem_input_wait(info,(int)arg);
-
-		default:
-			return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-/* mgsl_set_termios()
- * 
- * 	Set new termios settings
- * 	
- * Arguments:
- * 
- * 	tty		pointer to tty structure
- * 	termios		pointer to buffer to hold returned old termios
- * 	
- * Return Value:		None
- */
-static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
-			tty->driver->name );
-	
-	mgsl_change_params(info);
-
-	/* Handle transition to B0 status */
-	if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-	 	usc_set_serial_signals(info);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	}
-
-	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
-		info->serial_signals |= SerialSignal_DTR;
-		if (!C_CRTSCTS(tty) || !tty_throttled(tty))
-			info->serial_signals |= SerialSignal_RTS;
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-	 	usc_set_serial_signals(info);
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	}
-
-	/* Handle turning off CRTSCTS */
-	if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
-		tty->hw_stopped = 0;
-		mgsl_start(tty);
-	}
-
-}	/* end of mgsl_set_termios() */
-
-/* mgsl_close()
- * 
- * 	Called when port is closed. Wait for remaining data to be
- * 	sent. Disable port and free resources.
- * 	
- * Arguments:
- * 
- * 	tty	pointer to open tty structure
- * 	filp	pointer to open file object
- * 	
- * Return Value:	None
- */
-static void mgsl_close(struct tty_struct *tty, struct file * filp)
-{
-	struct mgsl_struct * info = tty->driver_data;
-
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
-		return;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
-			 __FILE__,__LINE__, info->device_name, info->port.count);
-
-	if (tty_port_close_start(&info->port, tty, filp) == 0)
-		goto cleanup;
-
-	mutex_lock(&info->port.mutex);
-	if (tty_port_initialized(&info->port))
- 		mgsl_wait_until_sent(tty, info->timeout);
-	mgsl_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	shutdown(info);
-	mutex_unlock(&info->port.mutex);
-
-	tty_port_close_end(&info->port, tty);	
-	info->port.tty = NULL;
-cleanup:			
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
-			tty->driver->name, info->port.count);
-			
-}	/* end of mgsl_close() */
-
-/* mgsl_wait_until_sent()
- *
- *	Wait until the transmitter is empty.
- *
- * Arguments:
- *
- *	tty		pointer to tty info structure
- *	timeout		time to wait for send completion
- *
- * Return Value:	None
- */
-static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-	struct mgsl_struct * info = tty->driver_data;
-	unsigned long orig_jiffies, char_time;
-
-	if (!info )
-		return;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
-		return;
-
-	if (!tty_port_initialized(&info->port))
-		goto exit;
-
-	orig_jiffies = jiffies;
-
-	/* Set check interval to 1/5 of estimated time to
-	 * send a character, and make it at least 1. The check
-	 * interval should also be less than the timeout.
-	 * Note: use tight timings here to satisfy the NIST-PCTS.
-	 */ 
-
-	if ( info->params.data_rate ) {
-	       	char_time = info->timeout/(32 * 5);
-		if (!char_time)
-			char_time++;
-	} else
-		char_time = 1;
-		
-	if (timeout)
-		char_time = min_t(unsigned long, char_time, timeout);
-		
-	if ( info->params.mode == MGSL_MODE_HDLC ||
-		info->params.mode == MGSL_MODE_RAW ) {
-		while (info->tx_active) {
-			msleep_interruptible(jiffies_to_msecs(char_time));
-			if (signal_pending(current))
-				break;
-			if (timeout && time_after(jiffies, orig_jiffies + timeout))
-				break;
-		}
-	} else {
-		while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
-			info->tx_enabled) {
-			msleep_interruptible(jiffies_to_msecs(char_time));
-			if (signal_pending(current))
-				break;
-			if (timeout && time_after(jiffies, orig_jiffies + timeout))
-				break;
-		}
-	}
-      
-exit:
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
-			 __FILE__,__LINE__, info->device_name );
-			 
-}	/* end of mgsl_wait_until_sent() */
-
-/* mgsl_hangup()
- *
- *	Called by tty_hangup() when a hangup is signaled.
- *	This is the same as to closing all open files for the port.
- *
- * Arguments:		tty	pointer to associated tty object
- * Return Value:	None
- */
-static void mgsl_hangup(struct tty_struct *tty)
-{
-	struct mgsl_struct * info = tty->driver_data;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_hangup(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-			 
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
-		return;
-
-	mgsl_flush_buffer(tty);
-	shutdown(info);
-	
-	info->port.count = 0;	
-	tty_port_set_active(&info->port, 0);
-	info->port.tty = NULL;
-
-	wake_up_interruptible(&info->port.open_wait);
-	
-}	/* end of mgsl_hangup() */
-
-/*
- * carrier_raised()
- *
- *	Return true if carrier is raised
- */
-
-static int carrier_raised(struct tty_port *port)
-{
-	unsigned long flags;
-	struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
-	
-	spin_lock_irqsave(&info->irq_spinlock, flags);
- 	usc_get_serial_signals(info);
-	spin_unlock_irqrestore(&info->irq_spinlock, flags);
-	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
-}
-
-static void dtr_rts(struct tty_port *port, int on)
-{
-	struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if (on)
-		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
-	else
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- 	usc_set_serial_signals(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-}
-
-
-/* block_til_ready()
- * 
- * 	Block the current process until the specified port
- * 	is ready to be opened.
- * 	
- * Arguments:
- * 
- * 	tty		pointer to tty info structure
- * 	filp		pointer to open file object
- * 	info		pointer to device instance data
- * 	
- * Return Value:	0 if success, otherwise error code
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   struct mgsl_struct *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int		retval;
-	bool		do_clocal = false;
-	unsigned long	flags;
-	int		dcd;
-	struct tty_port *port = &info->port;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):block_til_ready on %s\n",
-			 __FILE__,__LINE__, tty->driver->name );
-
-	if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
-		/* nonblock mode is set or port is not enabled */
-		tty_port_set_active(port, 1);
-		return 0;
-	}
-
-	if (C_CLOCAL(tty))
-		do_clocal = true;
-
-	/* Wait for carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, port->count is dropped by one, so that
-	 * mgsl_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	 
-	retval = 0;
-	add_wait_queue(&port->open_wait, &wait);
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):block_til_ready before block on %s count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, port->count );
-
-	spin_lock_irqsave(&info->irq_spinlock, flags);
-	port->count--;
-	spin_unlock_irqrestore(&info->irq_spinlock, flags);
-	port->blocked_open++;
-
-	while (1) {
-		if (C_BAUD(tty) && tty_port_initialized(port))
-			tty_port_raise_dtr_rts(port);
-
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		if (tty_hung_up_p(filp) || !tty_port_initialized(port)) {
-			retval = (port->flags & ASYNC_HUP_NOTIFY) ?
-					-EAGAIN : -ERESTARTSYS;
-			break;
-		}
-
-		dcd = tty_port_carrier_raised(&info->port);
-		if (do_clocal || dcd)
-			break;
-
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-		
-		if (debug_level >= DEBUG_LEVEL_INFO)
-			printk("%s(%d):block_til_ready blocking on %s count=%d\n",
-				 __FILE__,__LINE__, tty->driver->name, port->count );
-				 
-		tty_unlock(tty);
-		schedule();
-		tty_lock(tty);
-	}
-	
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->open_wait, &wait);
-	
-	/* FIXME: Racy on hangup during close wait */
-	if (!tty_hung_up_p(filp))
-		port->count++;
-	port->blocked_open--;
-	
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, port->count );
-			 
-	if (!retval)
-		tty_port_set_active(port, 1);
-		
-	return retval;
-	
-}	/* end of block_til_ready() */
-
-static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
-{
-	struct mgsl_struct *info;
-	int line = tty->index;
-
-	/* verify range of specified line number */
-	if (line >= mgsl_device_count) {
-		printk("%s(%d):mgsl_open with invalid line #%d.\n",
-			__FILE__, __LINE__, line);
-		return -ENODEV;
-	}
-
-	/* find the info structure for the specified line */
-	info = mgsl_device_list;
-	while (info && info->line != line)
-		info = info->next_device;
-	if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
-		return -ENODEV;
-	tty->driver_data = info;
-
-	return tty_port_install(&info->port, driver, tty);
-}
-
-/* mgsl_open()
- *
- *	Called when a port is opened.  Init and enable port.
- *	Perform serial-specific initialization for the tty structure.
- *
- * Arguments:		tty	pointer to tty info structure
- *			filp	associated file pointer
- *
- * Return Value:	0 if success, otherwise error code
- */
-static int mgsl_open(struct tty_struct *tty, struct file * filp)
-{
-	struct mgsl_struct *info = tty->driver_data;
-	unsigned long flags;
-	int retval;
-
-	info->port.tty = tty;
-		
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
-			 __FILE__,__LINE__,tty->driver->name, info->port.count);
-
-	info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-	spin_lock_irqsave(&info->netlock, flags);
-	if (info->netcount) {
-		retval = -EBUSY;
-		spin_unlock_irqrestore(&info->netlock, flags);
-		goto cleanup;
-	}
-	info->port.count++;
-	spin_unlock_irqrestore(&info->netlock, flags);
-
-	if (info->port.count == 1) {
-		/* 1st open on this device, init hardware */
-		retval = startup(info);
-		if (retval < 0)
-			goto cleanup;
-	}
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-		if (debug_level >= DEBUG_LEVEL_INFO)
-			printk("%s(%d):block_til_ready(%s) returned %d\n",
-				 __FILE__,__LINE__, info->device_name, retval);
-		goto cleanup;
-	}
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):mgsl_open(%s) success\n",
-			 __FILE__,__LINE__, info->device_name);
-	retval = 0;
-	
-cleanup:			
-	if (retval) {
-		if (tty->count == 1)
-			info->port.tty = NULL; /* tty layer will release tty struct */
-		if(info->port.count)
-			info->port.count--;
-	}
-	
-	return retval;
-	
-}	/* end of mgsl_open() */
-
-/*
- * /proc fs routines....
- */
-
-static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
-{
-	char	stat_buf[30];
-	unsigned long flags;
-
-	seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
-		info->device_name, info->io_base, info->irq_level,
-		info->phys_memory_base, info->phys_lcr_base);
-
-	/* output current serial signal states */
-	spin_lock_irqsave(&info->irq_spinlock,flags);
- 	usc_get_serial_signals(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-	stat_buf[0] = 0;
-	stat_buf[1] = 0;
-	if (info->serial_signals & SerialSignal_RTS)
-		strcat(stat_buf, "|RTS");
-	if (info->serial_signals & SerialSignal_CTS)
-		strcat(stat_buf, "|CTS");
-	if (info->serial_signals & SerialSignal_DTR)
-		strcat(stat_buf, "|DTR");
-	if (info->serial_signals & SerialSignal_DSR)
-		strcat(stat_buf, "|DSR");
-	if (info->serial_signals & SerialSignal_DCD)
-		strcat(stat_buf, "|CD");
-	if (info->serial_signals & SerialSignal_RI)
-		strcat(stat_buf, "|RI");
-
-	if (info->params.mode == MGSL_MODE_HDLC ||
-	    info->params.mode == MGSL_MODE_RAW ) {
-		seq_printf(m, " HDLC txok:%d rxok:%d",
-			      info->icount.txok, info->icount.rxok);
-		if (info->icount.txunder)
-			seq_printf(m, " txunder:%d", info->icount.txunder);
-		if (info->icount.txabort)
-			seq_printf(m, " txabort:%d", info->icount.txabort);
-		if (info->icount.rxshort)
-			seq_printf(m, " rxshort:%d", info->icount.rxshort);
-		if (info->icount.rxlong)
-			seq_printf(m, " rxlong:%d", info->icount.rxlong);
-		if (info->icount.rxover)
-			seq_printf(m, " rxover:%d", info->icount.rxover);
-		if (info->icount.rxcrc)
-			seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
-	} else {
-		seq_printf(m, " ASYNC tx:%d rx:%d",
-			      info->icount.tx, info->icount.rx);
-		if (info->icount.frame)
-			seq_printf(m, " fe:%d", info->icount.frame);
-		if (info->icount.parity)
-			seq_printf(m, " pe:%d", info->icount.parity);
-		if (info->icount.brk)
-			seq_printf(m, " brk:%d", info->icount.brk);
-		if (info->icount.overrun)
-			seq_printf(m, " oe:%d", info->icount.overrun);
-	}
-	
-	/* Append serial signal status to end */
-	seq_printf(m, " %s\n", stat_buf+1);
-	
-	seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
-	 info->tx_active,info->bh_requested,info->bh_running,
-	 info->pending_bh);
-	 
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	{	
-	u16 Tcsr = usc_InReg( info, TCSR );
-	u16 Tdmr = usc_InDmaReg( info, TDMR );
-	u16 Ticr = usc_InReg( info, TICR );
-	u16 Rscr = usc_InReg( info, RCSR );
-	u16 Rdmr = usc_InDmaReg( info, RDMR );
-	u16 Ricr = usc_InReg( info, RICR );
-	u16 Icr = usc_InReg( info, ICR );
-	u16 Dccr = usc_InReg( info, DCCR );
-	u16 Tmr = usc_InReg( info, TMR );
-	u16 Tccr = usc_InReg( info, TCCR );
-	u16 Ccar = inw( info->io_base + CCAR );
-	seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
-                        "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
-	 		Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
-	}
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-}
-
-/* Called to print information about devices */
-static int mgsl_proc_show(struct seq_file *m, void *v)
-{
-	struct mgsl_struct *info;
-	
-	seq_printf(m, "synclink driver:%s\n", driver_version);
-	
-	info = mgsl_device_list;
-	while( info ) {
-		line_info(m, info);
-		info = info->next_device;
-	}
-	return 0;
-}
-
-/* mgsl_allocate_dma_buffers()
- * 
- * 	Allocate and format DMA buffers (ISA adapter)
- * 	or format shared memory buffers (PCI adapter).
- * 
- * Arguments:		info	pointer to device instance data
- * Return Value:	0 if success, otherwise error
- */
-static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
-{
-	unsigned short BuffersPerFrame;
-
-	info->last_mem_alloc = 0;
-
-	/* Calculate the number of DMA buffers necessary to hold the */
-	/* largest allowable frame size. Note: If the max frame size is */
-	/* not an even multiple of the DMA buffer size then we need to */
-	/* round the buffer count per frame up one. */
-
-	BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
-	if ( info->max_frame_size % DMABUFFERSIZE )
-		BuffersPerFrame++;
-
-	/*
-	 * The PCI adapter has 256KBytes of shared memory to use.  This is 64
-	 * PAGE_SIZE buffers.
-	 *
-	 * The first page is used for padding at this time so the buffer list
-	 * does not begin at offset 0 of the PCI adapter's shared memory.
-	 *
-	 * The 2nd page is used for the buffer list. A 4K buffer list can hold
-	 * 128 DMA_BUFFER structures at 32 bytes each.
-	 *
-	 * This leaves 62 4K pages.
-	 *
-	 * The next N pages are used for transmit frame(s).  We reserve enough
-	 * 4K page blocks to hold the required number of transmit dma buffers
-	 * (num_tx_dma_buffers), each of MaxFrameSize size.
-	 *
-	 * Of the remaining pages (62-N), determine how many can be used to
-	 * receive full MaxFrameSize inbound frames
-	 */
-	info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
-	info->rx_buffer_count = 62 - info->tx_buffer_count;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
-			__FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
-	
-	if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
-		  mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 || 
-		  mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 || 
-		  mgsl_alloc_intermediate_rxbuffer_memory(info) < 0  ||
-		  mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
-		printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
-		return -ENOMEM;
-	}
-	
-	mgsl_reset_rx_dma_buffers( info );
-  	mgsl_reset_tx_dma_buffers( info );
-
-	return 0;
-
-}	/* end of mgsl_allocate_dma_buffers() */
-
-/*
- * mgsl_alloc_buffer_list_memory()
- * 
- * Allocate a common DMA buffer for use as the
- * receive and transmit buffer lists.
- * 
- * A buffer list is a set of buffer entries where each entry contains
- * a pointer to an actual buffer and a pointer to the next buffer entry
- * (plus some other info about the buffer).
- * 
- * The buffer entries for a list are built to form a circular list so
- * that when the entire list has been traversed you start back at the
- * beginning.
- * 
- * This function allocates memory for just the buffer entries.
- * The links (pointer to next entry) are filled in with the physical
- * address of the next entry so the adapter can navigate the list
- * using bus master DMA. The pointers to the actual buffers are filled
- * out later when the actual buffers are allocated.
- * 
- * Arguments:		info	pointer to device instance data
- * Return Value:	0 if success, otherwise error
- */
-static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
-{
-	unsigned int i;
-
-	/* PCI adapter uses shared memory. */
-	info->buffer_list = info->memory_base + info->last_mem_alloc;
-	info->buffer_list_phys = info->last_mem_alloc;
-	info->last_mem_alloc += BUFFERLISTSIZE;
-
-	/* We got the memory for the buffer entry lists. */
-	/* Initialize the memory block to all zeros. */
-	memset( info->buffer_list, 0, BUFFERLISTSIZE );
-
-	/* Save virtual address pointers to the receive and */
-	/* transmit buffer lists. (Receive 1st). These pointers will */
-	/* be used by the processor to access the lists. */
-	info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
-	info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
-	info->tx_buffer_list += info->rx_buffer_count;
-
-	/*
-	 * Build the links for the buffer entry lists such that
-	 * two circular lists are built. (Transmit and Receive).
-	 *
-	 * Note: the links are physical addresses
-	 * which are read by the adapter to determine the next
-	 * buffer entry to use.
-	 */
-
-	for ( i = 0; i < info->rx_buffer_count; i++ ) {
-		/* calculate and store physical address of this buffer entry */
-		info->rx_buffer_list[i].phys_entry =
-			info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
-
-		/* calculate and store physical address of */
-		/* next entry in cirular list of entries */
-
-		info->rx_buffer_list[i].link = info->buffer_list_phys;
-
-		if ( i < info->rx_buffer_count - 1 )
-			info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
-	}
-
-	for ( i = 0; i < info->tx_buffer_count; i++ ) {
-		/* calculate and store physical address of this buffer entry */
-		info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
-			((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
-
-		/* calculate and store physical address of */
-		/* next entry in cirular list of entries */
-
-		info->tx_buffer_list[i].link = info->buffer_list_phys +
-			info->rx_buffer_count * sizeof(DMABUFFERENTRY);
-
-		if ( i < info->tx_buffer_count - 1 )
-			info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
-	}
-
-	return 0;
-
-}	/* end of mgsl_alloc_buffer_list_memory() */
-
-/* Free DMA buffers allocated for use as the
- * receive and transmit buffer lists.
- * Warning:
- * 
- * 	The data transfer buffers associated with the buffer list
- * 	MUST be freed before freeing the buffer list itself because
- * 	the buffer list contains the information necessary to free
- * 	the individual buffers!
- */
-static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
-{
-	info->buffer_list = NULL;
-	info->rx_buffer_list = NULL;
-	info->tx_buffer_list = NULL;
-
-}	/* end of mgsl_free_buffer_list_memory() */
-
-/*
- * mgsl_alloc_frame_memory()
- * 
- * 	Allocate the frame DMA buffers used by the specified buffer list.
- * 	Each DMA buffer will be one memory page in size. This is necessary
- * 	because memory can fragment enough that it may be impossible
- * 	contiguous pages.
- * 
- * Arguments:
- * 
- *	info		pointer to device instance data
- * 	BufferList	pointer to list of buffer entries
- * 	Buffercount	count of buffer entries in buffer list
- * 
- * Return Value:	0 if success, otherwise -ENOMEM
- */
-static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
-{
-	int i;
-
-	/* Allocate page sized buffers for the receive buffer list */
-
-	for ( i = 0; i < Buffercount; i++ ) {
-		BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
-		BufferList[i].phys_addr = info->last_mem_alloc;
-		info->last_mem_alloc += DMABUFFERSIZE;
-	}
-
-	return 0;
-
-}	/* end of mgsl_alloc_frame_memory() */
-
-/*
- * mgsl_free_frame_memory()
- * 
- * 	Free the buffers associated with
- * 	each buffer entry of a buffer list.
- * 
- * Arguments:
- * 
- *	info		pointer to device instance data
- * 	BufferList	pointer to list of buffer entries
- * 	Buffercount	count of buffer entries in buffer list
- * 
- * Return Value:	None
- */
-static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
-{
-	int i;
-
-	if ( BufferList ) {
-		for ( i = 0 ; i < Buffercount ; i++ ) {
-			if ( BufferList[i].virt_addr ) {
-				BufferList[i].virt_addr = NULL;
-			}
-		}
-	}
-
-}	/* end of mgsl_free_frame_memory() */
-
-/* mgsl_free_dma_buffers()
- * 
- * 	Free DMA buffers
- * 	
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_free_dma_buffers( struct mgsl_struct *info )
-{
-	mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
-	mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
-	mgsl_free_buffer_list_memory( info );
-
-}	/* end of mgsl_free_dma_buffers() */
-
-
-/*
- * mgsl_alloc_intermediate_rxbuffer_memory()
- * 
- * 	Allocate a buffer large enough to hold max_frame_size. This buffer
- *	is used to pass an assembled frame to the line discipline.
- * 
- * Arguments:
- * 
- *	info		pointer to device instance data
- * 
- * Return Value:	0 if success, otherwise -ENOMEM
- */
-static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
-{
-	info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
-	if ( info->intermediate_rxbuffer == NULL )
-		return -ENOMEM;
-	/* unused flag buffer to satisfy receive_buf calling interface */
-	info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
-	if (!info->flag_buf) {
-		kfree(info->intermediate_rxbuffer);
-		info->intermediate_rxbuffer = NULL;
-		return -ENOMEM;
-	}
-	return 0;
-
-}	/* end of mgsl_alloc_intermediate_rxbuffer_memory() */
-
-/*
- * mgsl_free_intermediate_rxbuffer_memory()
- * 
- * 
- * Arguments:
- * 
- *	info		pointer to device instance data
- * 
- * Return Value:	None
- */
-static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
-{
-	kfree(info->intermediate_rxbuffer);
-	info->intermediate_rxbuffer = NULL;
-	kfree(info->flag_buf);
-	info->flag_buf = NULL;
-
-}	/* end of mgsl_free_intermediate_rxbuffer_memory() */
-
-/*
- * mgsl_alloc_intermediate_txbuffer_memory()
- *
- * 	Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
- * 	This buffer is used to load transmit frames into the adapter's dma transfer
- * 	buffers when there is sufficient space.
- *
- * Arguments:
- *
- *	info		pointer to device instance data
- *
- * Return Value:	0 if success, otherwise -ENOMEM
- */
-static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
-{
-	int i;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("%s %s(%d)  allocating %d tx holding buffers\n",
-				info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
-
-	memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
-
-	for ( i=0; i<info->num_tx_holding_buffers; ++i) {
-		info->tx_holding_buffers[i].buffer =
-			kmalloc(info->max_frame_size, GFP_KERNEL);
-		if (info->tx_holding_buffers[i].buffer == NULL) {
-			for (--i; i >= 0; i--) {
-				kfree(info->tx_holding_buffers[i].buffer);
-				info->tx_holding_buffers[i].buffer = NULL;
-			}
-			return -ENOMEM;
-		}
-	}
-
-	return 0;
-
-}	/* end of mgsl_alloc_intermediate_txbuffer_memory() */
-
-/*
- * mgsl_free_intermediate_txbuffer_memory()
- *
- *
- * Arguments:
- *
- *	info		pointer to device instance data
- *
- * Return Value:	None
- */
-static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
-{
-	int i;
-
-	for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
-		kfree(info->tx_holding_buffers[i].buffer);
-		info->tx_holding_buffers[i].buffer = NULL;
-	}
-
-	info->get_tx_holding_index = 0;
-	info->put_tx_holding_index = 0;
-	info->tx_holding_count = 0;
-
-}	/* end of mgsl_free_intermediate_txbuffer_memory() */
-
-
-/*
- * load_next_tx_holding_buffer()
- *
- * attempts to load the next buffered tx request into the
- * tx dma buffers
- *
- * Arguments:
- *
- *	info		pointer to device instance data
- *
- * Return Value:	true if next buffered tx request loaded
- * 			into adapter's tx dma buffer,
- * 			false otherwise
- */
-static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
-{
-	bool ret = false;
-
-	if ( info->tx_holding_count ) {
-		/* determine if we have enough tx dma buffers
-		 * to accommodate the next tx frame
-		 */
-		struct tx_holding_buffer *ptx =
-			&info->tx_holding_buffers[info->get_tx_holding_index];
-		int num_free = num_free_tx_dma_buffers(info);
-		int num_needed = ptx->buffer_size / DMABUFFERSIZE;
-		if ( ptx->buffer_size % DMABUFFERSIZE )
-			++num_needed;
-
-		if (num_needed <= num_free) {
-			info->xmit_cnt = ptx->buffer_size;
-			mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
-
-			--info->tx_holding_count;
-			if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
-				info->get_tx_holding_index=0;
-
-			/* restart transmit timer */
-			mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
-
-			ret = true;
-		}
-	}
-
-	return ret;
-}
-
-/*
- * save_tx_buffer_request()
- *
- * attempt to store transmit frame request for later transmission
- *
- * Arguments:
- *
- *	info		pointer to device instance data
- * 	Buffer		pointer to buffer containing frame to load
- * 	BufferSize	size in bytes of frame in Buffer
- *
- * Return Value:	1 if able to store, 0 otherwise
- */
-static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
-{
-	struct tx_holding_buffer *ptx;
-
-	if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
-		return 0;	        /* all buffers in use */
-	}
-
-	ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
-	ptx->buffer_size = BufferSize;
-	memcpy( ptx->buffer, Buffer, BufferSize);
-
-	++info->tx_holding_count;
-	if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
-		info->put_tx_holding_index=0;
-
-	return 1;
-}
-
-static int mgsl_claim_resources(struct mgsl_struct *info)
-{
-	if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
-		printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->io_base);
-		return -ENODEV;
-	}
-	info->io_addr_requested = true;
-	
-	if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
-		info->device_name, info ) < 0 ) {
-		printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
-			__FILE__,__LINE__,info->device_name, info->irq_level );
-		goto errout;
-	}
-	info->irq_requested = true;
-	
-	if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
-		printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_memory_base);
-		goto errout;
-	}
-	info->shared_mem_requested = true;
-	if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
-		printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
-		goto errout;
-	}
-	info->lcr_mem_requested = true;
-
-	info->memory_base = ioremap(info->phys_memory_base, 0x40000);
-	if (!info->memory_base) {
-		printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
-		goto errout;
-	}
-		
-	if ( !mgsl_memory_test(info) ) {
-		printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
-		goto errout;
-	}
-		
-	info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE);
-	if (!info->lcr_base) {
-		printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
-		goto errout;
-	}
-	info->lcr_base += info->lcr_offset;
-		
-	if ( mgsl_allocate_dma_buffers(info) < 0 ) {
-		printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
-			__FILE__,__LINE__,info->device_name, info->dma_level );
-		goto errout;
-	}	
-	
-	return 0;
-errout:
-	mgsl_release_resources(info);
-	return -ENODEV;
-
-}	/* end of mgsl_claim_resources() */
-
-static void mgsl_release_resources(struct mgsl_struct *info)
-{
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):mgsl_release_resources(%s) entry\n",
-			__FILE__,__LINE__,info->device_name );
-			
-	if ( info->irq_requested ) {
-		free_irq(info->irq_level, info);
-		info->irq_requested = false;
-	}
-	if ( info->dma_requested ) {
-		disable_dma(info->dma_level);
-		free_dma(info->dma_level);
-		info->dma_requested = false;
-	}
-	mgsl_free_dma_buffers(info);
-	mgsl_free_intermediate_rxbuffer_memory(info);
-     	mgsl_free_intermediate_txbuffer_memory(info);
-	
-	if ( info->io_addr_requested ) {
-		release_region(info->io_base,info->io_addr_size);
-		info->io_addr_requested = false;
-	}
-	if ( info->shared_mem_requested ) {
-		release_mem_region(info->phys_memory_base,0x40000);
-		info->shared_mem_requested = false;
-	}
-	if ( info->lcr_mem_requested ) {
-		release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
-		info->lcr_mem_requested = false;
-	}
-	if (info->memory_base){
-		iounmap(info->memory_base);
-		info->memory_base = NULL;
-	}
-	if (info->lcr_base){
-		iounmap(info->lcr_base - info->lcr_offset);
-		info->lcr_base = NULL;
-	}
-	
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):mgsl_release_resources(%s) exit\n",
-			__FILE__,__LINE__,info->device_name );
-			
-}	/* end of mgsl_release_resources() */
-
-/* mgsl_add_device()
- * 
- * 	Add the specified device instance data structure to the
- * 	global linked list of devices and increment the device count.
- * 	
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_add_device( struct mgsl_struct *info )
-{
-	info->next_device = NULL;
-	info->line = mgsl_device_count;
-	sprintf(info->device_name,"ttySL%d",info->line);
-	
-	if (info->line < MAX_TOTAL_DEVICES) {
-		if (maxframe[info->line])
-			info->max_frame_size = maxframe[info->line];
-
-		if (txdmabufs[info->line]) {
-			info->num_tx_dma_buffers = txdmabufs[info->line];
-			if (info->num_tx_dma_buffers < 1)
-				info->num_tx_dma_buffers = 1;
-		}
-
-		if (txholdbufs[info->line]) {
-			info->num_tx_holding_buffers = txholdbufs[info->line];
-			if (info->num_tx_holding_buffers < 1)
-				info->num_tx_holding_buffers = 1;
-			else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
-				info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
-		}
-	}
-
-	mgsl_device_count++;
-	
-	if ( !mgsl_device_list )
-		mgsl_device_list = info;
-	else {	
-		struct mgsl_struct *current_dev = mgsl_device_list;
-		while( current_dev->next_device )
-			current_dev = current_dev->next_device;
-		current_dev->next_device = info;
-	}
-	
-	if ( info->max_frame_size < 4096 )
-		info->max_frame_size = 4096;
-	else if ( info->max_frame_size > 65535 )
-		info->max_frame_size = 65535;
-	
-	printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
-		info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
-		info->phys_memory_base, info->phys_lcr_base,
-	     	info->max_frame_size );
-
-#if SYNCLINK_GENERIC_HDLC
-	hdlcdev_init(info);
-#endif
-
-}	/* end of mgsl_add_device() */
-
-static const struct tty_port_operations mgsl_port_ops = {
-	.carrier_raised = carrier_raised,
-	.dtr_rts = dtr_rts,
-};
-
-
-/* mgsl_allocate_device()
- * 
- * 	Allocate and initialize a device instance structure
- * 	
- * Arguments:		none
- * Return Value:	pointer to mgsl_struct if success, otherwise NULL
- */
-static struct mgsl_struct* mgsl_allocate_device(void)
-{
-	struct mgsl_struct *info;
-	
-	info = kzalloc(sizeof(struct mgsl_struct),
-		 GFP_KERNEL);
-		 
-	if (!info) {
-		printk("Error can't allocate device instance data\n");
-	} else {
-		tty_port_init(&info->port);
-		info->port.ops = &mgsl_port_ops;
-		info->magic = MGSL_MAGIC;
-		INIT_WORK(&info->task, mgsl_bh_handler);
-		info->max_frame_size = 4096;
-		info->port.close_delay = 5*HZ/10;
-		info->port.closing_wait = 30*HZ;
-		init_waitqueue_head(&info->status_event_wait_q);
-		init_waitqueue_head(&info->event_wait_q);
-		spin_lock_init(&info->irq_spinlock);
-		spin_lock_init(&info->netlock);
-		memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
-		info->idle_mode = HDLC_TXIDLE_FLAGS;
-		info->num_tx_dma_buffers = 1;
-		info->num_tx_holding_buffers = 0;
-	}
-	
-	return info;
-
-}	/* end of mgsl_allocate_device()*/
-
-static const struct tty_operations mgsl_ops = {
-	.install = mgsl_install,
-	.open = mgsl_open,
-	.close = mgsl_close,
-	.write = mgsl_write,
-	.put_char = mgsl_put_char,
-	.flush_chars = mgsl_flush_chars,
-	.write_room = mgsl_write_room,
-	.chars_in_buffer = mgsl_chars_in_buffer,
-	.flush_buffer = mgsl_flush_buffer,
-	.ioctl = mgsl_ioctl,
-	.throttle = mgsl_throttle,
-	.unthrottle = mgsl_unthrottle,
-	.send_xchar = mgsl_send_xchar,
-	.break_ctl = mgsl_break,
-	.wait_until_sent = mgsl_wait_until_sent,
-	.set_termios = mgsl_set_termios,
-	.stop = mgsl_stop,
-	.start = mgsl_start,
-	.hangup = mgsl_hangup,
-	.tiocmget = tiocmget,
-	.tiocmset = tiocmset,
-	.get_icount = msgl_get_icount,
-	.proc_show = mgsl_proc_show,
-};
-
-/*
- * perform tty device initialization
- */
-static int mgsl_init_tty(void)
-{
-	int rc;
-
-	serial_driver = alloc_tty_driver(128);
-	if (!serial_driver)
-		return -ENOMEM;
-	
-	serial_driver->driver_name = "synclink";
-	serial_driver->name = "ttySL";
-	serial_driver->major = ttymajor;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->init_termios.c_ispeed = 9600;
-	serial_driver->init_termios.c_ospeed = 9600;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(serial_driver, &mgsl_ops);
-	if ((rc = tty_register_driver(serial_driver)) < 0) {
-		printk("%s(%d):Couldn't register serial driver\n",
-			__FILE__,__LINE__);
-		put_tty_driver(serial_driver);
-		serial_driver = NULL;
-		return rc;
-	}
-			
- 	printk("%s %s, tty major#%d\n",
-		driver_name, driver_version,
-		serial_driver->major);
-	return 0;
-}
-
-static void synclink_cleanup(void)
-{
-	int rc;
-	struct mgsl_struct *info;
-	struct mgsl_struct *tmp;
-
-	printk("Unloading %s: %s\n", driver_name, driver_version);
-
-	if (serial_driver) {
-		rc = tty_unregister_driver(serial_driver);
-		if (rc)
-			printk("%s(%d) failed to unregister tty driver err=%d\n",
-			       __FILE__,__LINE__,rc);
-		put_tty_driver(serial_driver);
-	}
-
-	info = mgsl_device_list;
-	while(info) {
-#if SYNCLINK_GENERIC_HDLC
-		hdlcdev_exit(info);
-#endif
-		mgsl_release_resources(info);
-		tmp = info;
-		info = info->next_device;
-		tty_port_destroy(&tmp->port);
-		kfree(tmp);
-	}
-	
-	if (pci_registered)
-		pci_unregister_driver(&synclink_pci_driver);
-}
-
-static int __init synclink_init(void)
-{
-	int rc;
-
-	if (break_on_load) {
-	 	mgsl_get_text_ptr();
-  		BREAKPOINT();
-	}
-
- 	printk("%s %s\n", driver_name, driver_version);
-
-	if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
-		printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
-	else
-		pci_registered = true;
-
-	if ((rc = mgsl_init_tty()) < 0)
-		goto error;
-
-	return 0;
-
-error:
-	synclink_cleanup();
-	return rc;
-}
-
-static void __exit synclink_exit(void)
-{
-	synclink_cleanup();
-}
-
-module_init(synclink_init);
-module_exit(synclink_exit);
-
-/*
- * usc_RTCmd()
- *
- * Issue a USC Receive/Transmit command to the
- * Channel Command/Address Register (CCAR).
- *
- * Notes:
- *
- *    The command is encoded in the most significant 5 bits <15..11>
- *    of the CCAR value. Bits <10..7> of the CCAR must be preserved
- *    and Bits <6..0> must be written as zeros.
- *
- * Arguments:
- *
- *    info   pointer to device information structure
- *    Cmd    command mask (use symbolic macros)
- *
- * Return Value:
- *
- *    None
- */
-static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
-{
-	/* output command to CCAR in bits <15..11> */
-	/* preserve bits <10..7>, bits <6..0> must be zero */
-
-	outw( Cmd + info->loopback_bits, info->io_base + CCAR );
-
-	/* Read to flush write to CCAR */
-	inw( info->io_base + CCAR );
-
-}	/* end of usc_RTCmd() */
-
-/*
- * usc_DmaCmd()
- *
- *    Issue a DMA command to the DMA Command/Address Register (DCAR).
- *
- * Arguments:
- *
- *    info   pointer to device information structure
- *    Cmd    DMA command mask (usc_DmaCmd_XX Macros)
- *
- * Return Value:
- *
- *       None
- */
-static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
-{
-	/* write command mask to DCAR */
-	outw( Cmd + info->mbre_bit, info->io_base );
-
-	/* Read to flush write to DCAR */
-	inw( info->io_base );
-
-}	/* end of usc_DmaCmd() */
-
-/*
- * usc_OutDmaReg()
- *
- *    Write a 16-bit value to a USC DMA register
- *
- * Arguments:
- *
- *    info      pointer to device info structure
- *    RegAddr   register address (number) for write
- *    RegValue  16-bit value to write to register
- *
- * Return Value:
- *
- *    None
- *
- */
-static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
-{
-	/* Note: The DCAR is located at the adapter base address */
-	/* Note: must preserve state of BIT8 in DCAR */
-
-	outw( RegAddr + info->mbre_bit, info->io_base );
-	outw( RegValue, info->io_base );
-
-	/* Read to flush write to DCAR */
-	inw( info->io_base );
-
-}	/* end of usc_OutDmaReg() */
- 
-/*
- * usc_InDmaReg()
- *
- *    Read a 16-bit value from a DMA register
- *
- * Arguments:
- *
- *    info     pointer to device info structure
- *    RegAddr  register address (number) to read from
- *
- * Return Value:
- *
- *    The 16-bit value read from register
- *
- */
-static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
-{
-	/* Note: The DCAR is located at the adapter base address */
-	/* Note: must preserve state of BIT8 in DCAR */
-
-	outw( RegAddr + info->mbre_bit, info->io_base );
-	return inw( info->io_base );
-
-}	/* end of usc_InDmaReg() */
-
-/*
- *
- * usc_OutReg()
- *
- *    Write a 16-bit value to a USC serial channel register 
- *
- * Arguments:
- *
- *    info      pointer to device info structure
- *    RegAddr   register address (number) to write to
- *    RegValue  16-bit value to write to register
- *
- * Return Value:
- *
- *    None
- *
- */
-static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
-{
-	outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
-	outw( RegValue, info->io_base + CCAR );
-
-	/* Read to flush write to CCAR */
-	inw( info->io_base + CCAR );
-
-}	/* end of usc_OutReg() */
-
-/*
- * usc_InReg()
- *
- *    Reads a 16-bit value from a USC serial channel register
- *
- * Arguments:
- *
- *    info       pointer to device extension
- *    RegAddr    register address (number) to read from
- *
- * Return Value:
- *
- *    16-bit value read from register
- */
-static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
-{
-	outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
-	return inw( info->io_base + CCAR );
-
-}	/* end of usc_InReg() */
-
-/* usc_set_sdlc_mode()
- *
- *    Set up the adapter for SDLC DMA communications.
- *
- * Arguments:		info    pointer to device instance data
- * Return Value: 	NONE
- */
-static void usc_set_sdlc_mode( struct mgsl_struct *info )
-{
-	u16 RegValue;
-	bool PreSL1660;
-	
-	/*
-	 * determine if the IUSC on the adapter is pre-SL1660. If
-	 * not, take advantage of the UnderWait feature of more
-	 * modern chips. If an underrun occurs and this bit is set,
-	 * the transmitter will idle the programmed idle pattern
-	 * until the driver has time to service the underrun. Otherwise,
-	 * the dma controller may get the cycles previously requested
-	 * and begin transmitting queued tx data.
-	 */
-	usc_OutReg(info,TMCR,0x1f);
-	RegValue=usc_InReg(info,TMDR);
-	PreSL1660 = (RegValue == IUSC_PRE_SL1660);
-
- 	if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
- 	{
- 	   /*
- 	   ** Channel Mode Register (CMR)
- 	   **
- 	   ** <15..14>    10    Tx Sub Modes, Send Flag on Underrun
- 	   ** <13>        0     0 = Transmit Disabled (initially)
- 	   ** <12>        0     1 = Consecutive Idles share common 0
- 	   ** <11..8>     1110  Transmitter Mode = HDLC/SDLC Loop
- 	   ** <7..4>      0000  Rx Sub Modes, addr/ctrl field handling
- 	   ** <3..0>      0110  Receiver Mode = HDLC/SDLC
- 	   **
- 	   ** 1000 1110 0000 0110 = 0x8e06
- 	   */
- 	   RegValue = 0x8e06;
- 
- 	   /*--------------------------------------------------
- 	    * ignore user options for UnderRun Actions and
- 	    * preambles
- 	    *--------------------------------------------------*/
- 	}
- 	else
- 	{	
-		/* Channel mode Register (CMR)
-		 *
-		 * <15..14>  00    Tx Sub modes, Underrun Action
-		 * <13>      0     1 = Send Preamble before opening flag
-		 * <12>      0     1 = Consecutive Idles share common 0
-		 * <11..8>   0110  Transmitter mode = HDLC/SDLC
-		 * <7..4>    0000  Rx Sub modes, addr/ctrl field handling
-		 * <3..0>    0110  Receiver mode = HDLC/SDLC
-		 *
-		 * 0000 0110 0000 0110 = 0x0606
-		 */
-		if (info->params.mode == MGSL_MODE_RAW) {
-			RegValue = 0x0001;		/* Set Receive mode = external sync */
-
-			usc_OutReg( info, IOCR,		/* Set IOCR DCD is RxSync Detect Input */
-				(unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
-
-			/*
-			 * TxSubMode:
-			 * 	CMR <15>		0	Don't send CRC on Tx Underrun
-			 * 	CMR <14>		x	undefined
-			 * 	CMR <13>		0	Send preamble before openning sync
-			 * 	CMR <12>		0	Send 8-bit syncs, 1=send Syncs per TxLength
-			 *
-			 * TxMode:
-			 * 	CMR <11-8)	0100	MonoSync
-			 *
-			 * 	0x00 0100 xxxx xxxx  04xx
-			 */
-			RegValue |= 0x0400;
-		}
-		else {
-
-		RegValue = 0x0606;
-
-		if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
-			RegValue |= BIT14;
-		else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
-			RegValue |= BIT15;
-		else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
-			RegValue |= BIT15 | BIT14;
-		}
-
-		if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
-			RegValue |= BIT13;
-	}
-
-	if ( info->params.mode == MGSL_MODE_HDLC &&
-		(info->params.flags & HDLC_FLAG_SHARE_ZERO) )
-		RegValue |= BIT12;
-
-	if ( info->params.addr_filter != 0xff )
-	{
-		/* set up receive address filtering */
-		usc_OutReg( info, RSR, info->params.addr_filter );
-		RegValue |= BIT4;
-	}
-
-	usc_OutReg( info, CMR, RegValue );
-	info->cmr_value = RegValue;
-
-	/* Receiver mode Register (RMR)
-	 *
-	 * <15..13>  000    encoding
-	 * <12..11>  00     FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
-	 * <10>      1      1 = Set CRC to all 1s (use for SDLC/HDLC)
-	 * <9>       0      1 = Include Receive chars in CRC
-	 * <8>       1      1 = Use Abort/PE bit as abort indicator
-	 * <7..6>    00     Even parity
-	 * <5>       0      parity disabled
-	 * <4..2>    000    Receive Char Length = 8 bits
-	 * <1..0>    00     Disable Receiver
-	 *
-	 * 0000 0101 0000 0000 = 0x0500
-	 */
-
-	RegValue = 0x0500;
-
-	switch ( info->params.encoding ) {
-	case HDLC_ENCODING_NRZB:               RegValue |= BIT13; break;
-	case HDLC_ENCODING_NRZI_MARK:          RegValue |= BIT14; break;
-	case HDLC_ENCODING_NRZI_SPACE:	       RegValue |= BIT14 | BIT13; break;
-	case HDLC_ENCODING_BIPHASE_MARK:       RegValue |= BIT15; break;
-	case HDLC_ENCODING_BIPHASE_SPACE:      RegValue |= BIT15 | BIT13; break;
-	case HDLC_ENCODING_BIPHASE_LEVEL:      RegValue |= BIT15 | BIT14; break;
-	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break;
-	}
-
-	if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
-		RegValue |= BIT9;
-	else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
-		RegValue |= ( BIT12 | BIT10 | BIT9 );
-
-	usc_OutReg( info, RMR, RegValue );
-
-	/* Set the Receive count Limit Register (RCLR) to 0xffff. */
-	/* When an opening flag of an SDLC frame is recognized the */
-	/* Receive Character count (RCC) is loaded with the value in */
-	/* RCLR. The RCC is decremented for each received byte.  The */
-	/* value of RCC is stored after the closing flag of the frame */
-	/* allowing the frame size to be computed. */
-
-	usc_OutReg( info, RCLR, RCLRVALUE );
-
-	usc_RCmd( info, RCmd_SelectRicrdma_level );
-
-	/* Receive Interrupt Control Register (RICR)
-	 *
-	 * <15..8>	?	RxFIFO DMA Request Level
-	 * <7>		0	Exited Hunt IA (Interrupt Arm)
-	 * <6>		0	Idle Received IA
-	 * <5>		0	Break/Abort IA
-	 * <4>		0	Rx Bound IA
-	 * <3>		1	Queued status reflects oldest 2 bytes in FIFO
-	 * <2>		0	Abort/PE IA
-	 * <1>		1	Rx Overrun IA
-	 * <0>		0	Select TC0 value for readback
-	 *
-	 *	0000 0000 0000 1000 = 0x000a
-	 */
-
-	/* Carry over the Exit Hunt and Idle Received bits */
-	/* in case they have been armed by usc_ArmEvents.   */
-
-	RegValue = usc_InReg( info, RICR ) & 0xc0;
-
-	usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
-
-	/* Unlatch all Rx status bits and clear Rx status IRQ Pending */
-
-	usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
-	usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
-
-	/* Transmit mode Register (TMR)
-	 *	
-	 * <15..13>	000	encoding
-	 * <12..11>	00	FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
-	 * <10>		1	1 = Start CRC as all 1s (use for SDLC/HDLC)
-	 * <9>		0	1 = Tx CRC Enabled
-	 * <8>		0	1 = Append CRC to end of transmit frame
-	 * <7..6>	00	Transmit parity Even
-	 * <5>		0	Transmit parity Disabled
-	 * <4..2>	000	Tx Char Length = 8 bits
-	 * <1..0>	00	Disable Transmitter
-	 *
-	 * 	0000 0100 0000 0000 = 0x0400
-	 */
-
-	RegValue = 0x0400;
-
-	switch ( info->params.encoding ) {
-	case HDLC_ENCODING_NRZB:               RegValue |= BIT13; break;
-	case HDLC_ENCODING_NRZI_MARK:          RegValue |= BIT14; break;
-	case HDLC_ENCODING_NRZI_SPACE:         RegValue |= BIT14 | BIT13; break;
-	case HDLC_ENCODING_BIPHASE_MARK:       RegValue |= BIT15; break;
-	case HDLC_ENCODING_BIPHASE_SPACE:      RegValue |= BIT15 | BIT13; break;
-	case HDLC_ENCODING_BIPHASE_LEVEL:      RegValue |= BIT15 | BIT14; break;
-	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break;
-	}
-
-	if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
-		RegValue |= BIT9 | BIT8;
-	else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
-		RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
-
-	usc_OutReg( info, TMR, RegValue );
-
-	usc_set_txidle( info );
-
-
-	usc_TCmd( info, TCmd_SelectTicrdma_level );
-
-	/* Transmit Interrupt Control Register (TICR)
-	 *
-	 * <15..8>	?	Transmit FIFO DMA Level
-	 * <7>		0	Present IA (Interrupt Arm)
-	 * <6>		0	Idle Sent IA
-	 * <5>		1	Abort Sent IA
-	 * <4>		1	EOF/EOM Sent IA
-	 * <3>		0	CRC Sent IA
-	 * <2>		1	1 = Wait for SW Trigger to Start Frame
-	 * <1>		1	Tx Underrun IA
-	 * <0>		0	TC0 constant on read back
-	 *
-	 *	0000 0000 0011 0110 = 0x0036
-	 */
-
-	usc_OutReg( info, TICR, 0x0736 );
-
-	usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
-	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
-
-	/*
-	** Transmit Command/Status Register (TCSR)
-	**
-	** <15..12>	0000	TCmd
-	** <11> 	0/1	UnderWait
-	** <10..08>	000	TxIdle
-	** <7>		x	PreSent
-	** <6>         	x	IdleSent
-	** <5>         	x	AbortSent
-	** <4>         	x	EOF/EOM Sent
-	** <3>         	x	CRC Sent
-	** <2>         	x	All Sent
-	** <1>         	x	TxUnder
-	** <0>         	x	TxEmpty
-	** 
-	** 0000 0000 0000 0000 = 0x0000
-	*/
-	info->tcsr_value = 0;
-
-	if ( !PreSL1660 )
-		info->tcsr_value |= TCSR_UNDERWAIT;
-		
-	usc_OutReg( info, TCSR, info->tcsr_value );
-
-	/* Clock mode Control Register (CMCR)
-	 *
-	 * <15..14>	00	counter 1 Source = Disabled
-	 * <13..12> 	00	counter 0 Source = Disabled
-	 * <11..10> 	11	BRG1 Input is TxC Pin
-	 * <9..8>	11	BRG0 Input is TxC Pin
-	 * <7..6>	01	DPLL Input is BRG1 Output
-	 * <5..3>	XXX	TxCLK comes from Port 0
-	 * <2..0>   	XXX	RxCLK comes from Port 1
-	 *
-	 *	0000 1111 0111 0111 = 0x0f77
-	 */
-
-	RegValue = 0x0f40;
-
-	if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
-		RegValue |= 0x0003;	/* RxCLK from DPLL */
-	else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
-		RegValue |= 0x0004;	/* RxCLK from BRG0 */
- 	else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
- 		RegValue |= 0x0006;	/* RxCLK from TXC Input */
-	else
-		RegValue |= 0x0007;	/* RxCLK from Port1 */
-
-	if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
-		RegValue |= 0x0018;	/* TxCLK from DPLL */
-	else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
-		RegValue |= 0x0020;	/* TxCLK from BRG0 */
- 	else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
- 		RegValue |= 0x0038;	/* RxCLK from TXC Input */
-	else
-		RegValue |= 0x0030;	/* TxCLK from Port0 */
-
-	usc_OutReg( info, CMCR, RegValue );
-
-
-	/* Hardware Configuration Register (HCR)
-	 *
-	 * <15..14>	00	CTR0 Divisor:00=32,01=16,10=8,11=4
-	 * <13>		0	CTR1DSel:0=CTR0Div determines CTR0Div
-	 * <12>		0	CVOK:0=report code violation in biphase
-	 * <11..10>	00	DPLL Divisor:00=32,01=16,10=8,11=4
-	 * <9..8>	XX	DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
-	 * <7..6>	00	reserved
-	 * <5>		0	BRG1 mode:0=continuous,1=single cycle
-	 * <4>		X	BRG1 Enable
-	 * <3..2>	00	reserved
-	 * <1>		0	BRG0 mode:0=continuous,1=single cycle
-	 * <0>		0	BRG0 Enable
-	 */
-
-	RegValue = 0x0000;
-
-	if ( info->params.flags & (HDLC_FLAG_RXC_DPLL | HDLC_FLAG_TXC_DPLL) ) {
-		u32 XtalSpeed;
-		u32 DpllDivisor;
-		u16 Tc;
-
-		/*  DPLL is enabled. Use BRG1 to provide continuous reference clock  */
-		/*  for DPLL. DPLL mode in HCR is dependent on the encoding used. */
-
-		XtalSpeed = 11059200;
-
-		if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
-			DpllDivisor = 16;
-			RegValue |= BIT10;
-		}
-		else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
-			DpllDivisor = 8;
-			RegValue |= BIT11;
-		}
-		else
-			DpllDivisor = 32;
-
-		/*  Tc = (Xtal/Speed) - 1 */
-		/*  If twice the remainder of (Xtal/Speed) is greater than Speed */
-		/*  then rounding up gives a more precise time constant. Instead */
-		/*  of rounding up and then subtracting 1 we just don't subtract */
-		/*  the one in this case. */
-
- 		/*--------------------------------------------------
- 		 * ejz: for DPLL mode, application should use the
- 		 * same clock speed as the partner system, even 
- 		 * though clocking is derived from the input RxData.
- 		 * In case the user uses a 0 for the clock speed,
- 		 * default to 0xffffffff and don't try to divide by
- 		 * zero
- 		 *--------------------------------------------------*/
- 		if ( info->params.clock_speed )
- 		{
-			Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
-			if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
-			       / info->params.clock_speed) )
-				Tc--;
- 		}
- 		else
- 			Tc = -1;
- 				  
-
-		/* Write 16-bit Time Constant for BRG1 */
-		usc_OutReg( info, TC1R, Tc );
-
-		RegValue |= BIT4;		/* enable BRG1 */
-
-		switch ( info->params.encoding ) {
-		case HDLC_ENCODING_NRZ:
-		case HDLC_ENCODING_NRZB:
-		case HDLC_ENCODING_NRZI_MARK:
-		case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
-		case HDLC_ENCODING_BIPHASE_MARK:
-		case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
-		case HDLC_ENCODING_BIPHASE_LEVEL:
-		case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 | BIT8; break;
-		}
-	}
-
-	usc_OutReg( info, HCR, RegValue );
-
-
-	/* Channel Control/status Register (CCSR)
-	 *
-	 * <15>		X	RCC FIFO Overflow status (RO)
-	 * <14>		X	RCC FIFO Not Empty status (RO)
-	 * <13>		0	1 = Clear RCC FIFO (WO)
-	 * <12>		X	DPLL Sync (RW)
-	 * <11>		X	DPLL 2 Missed Clocks status (RO)
-	 * <10>		X	DPLL 1 Missed Clock status (RO)
-	 * <9..8>	00	DPLL Resync on rising and falling edges (RW)
-	 * <7>		X	SDLC Loop On status (RO)
-	 * <6>		X	SDLC Loop Send status (RO)
-	 * <5>		1	Bypass counters for TxClk and RxClk (RW)
-	 * <4..2>   	000	Last Char of SDLC frame has 8 bits (RW)
-	 * <1..0>   	00	reserved
-	 *
-	 *	0000 0000 0010 0000 = 0x0020
-	 */
-
-	usc_OutReg( info, CCSR, 0x1020 );
-
-
-	if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
-		usc_OutReg( info, SICR,
-			    (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
-	}
-	
-
-	/* enable Master Interrupt Enable bit (MIE) */
-	usc_EnableMasterIrqBit( info );
-
-	usc_ClearIrqPendingBits( info, RECEIVE_STATUS | RECEIVE_DATA |
-				TRANSMIT_STATUS | TRANSMIT_DATA | MISC);
-
-	/* arm RCC underflow interrupt */
-	usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
-	usc_EnableInterrupts(info, MISC);
-
-	info->mbre_bit = 0;
-	outw( 0, info->io_base ); 			/* clear Master Bus Enable (DCAR) */
-	usc_DmaCmd( info, DmaCmd_ResetAllChannels );	/* disable both DMA channels */
-	info->mbre_bit = BIT8;
-	outw( BIT8, info->io_base );			/* set Master Bus Enable (DCAR) */
-
-	/* DMA Control Register (DCR)
-	 *
-	 * <15..14>	10	Priority mode = Alternating Tx/Rx
-	 *		01	Rx has priority
-	 *		00	Tx has priority
-	 *
-	 * <13>		1	Enable Priority Preempt per DCR<15..14>
-	 *			(WARNING DCR<11..10> must be 00 when this is 1)
-	 *		0	Choose activate channel per DCR<11..10>
-	 *
-	 * <12>		0	Little Endian for Array/List
-	 * <11..10>	00	Both Channels can use each bus grant
-	 * <9..6>	0000	reserved
-	 * <5>		0	7 CLK - Minimum Bus Re-request Interval
-	 * <4>		0	1 = drive D/C and S/D pins
-	 * <3>		1	1 = Add one wait state to all DMA cycles.
-	 * <2>		0	1 = Strobe /UAS on every transfer.
-	 * <1..0>	11	Addr incrementing only affects LS24 bits
-	 *
-	 *	0110 0000 0000 1011 = 0x600b
-	 */
-
-	/* PCI adapter does not need DMA wait state */
-	usc_OutDmaReg( info, DCR, 0xa00b );
-
-	/* Receive DMA mode Register (RDMR)
-	 *
-	 * <15..14>	11	DMA mode = Linked List Buffer mode
-	 * <13>		1	RSBinA/L = store Rx status Block in Arrary/List entry
-	 * <12>		1	Clear count of List Entry after fetching
-	 * <11..10>	00	Address mode = Increment
-	 * <9>		1	Terminate Buffer on RxBound
-	 * <8>		0	Bus Width = 16bits
-	 * <7..0>	?	status Bits (write as 0s)
-	 *
-	 * 1111 0010 0000 0000 = 0xf200
-	 */
-
-	usc_OutDmaReg( info, RDMR, 0xf200 );
-
-
-	/* Transmit DMA mode Register (TDMR)
-	 *
-	 * <15..14>	11	DMA mode = Linked List Buffer mode
-	 * <13>		1	TCBinA/L = fetch Tx Control Block from List entry
-	 * <12>		1	Clear count of List Entry after fetching
-	 * <11..10>	00	Address mode = Increment
-	 * <9>		1	Terminate Buffer on end of frame
-	 * <8>		0	Bus Width = 16bits
-	 * <7..0>	?	status Bits (Read Only so write as 0)
-	 *
-	 *	1111 0010 0000 0000 = 0xf200
-	 */
-
-	usc_OutDmaReg( info, TDMR, 0xf200 );
-
-
-	/* DMA Interrupt Control Register (DICR)
-	 *
-	 * <15>		1	DMA Interrupt Enable
-	 * <14>		0	1 = Disable IEO from USC
-	 * <13>		0	1 = Don't provide vector during IntAck
-	 * <12>		1	1 = Include status in Vector
-	 * <10..2>	0	reserved, Must be 0s
-	 * <1>		0	1 = Rx DMA Interrupt Enabled
-	 * <0>		0	1 = Tx DMA Interrupt Enabled
-	 *
-	 *	1001 0000 0000 0000 = 0x9000
-	 */
-
-	usc_OutDmaReg( info, DICR, 0x9000 );
-
-	usc_InDmaReg( info, RDMR );		/* clear pending receive DMA IRQ bits */
-	usc_InDmaReg( info, TDMR );		/* clear pending transmit DMA IRQ bits */
-	usc_OutDmaReg( info, CDIR, 0x0303 );	/* clear IUS and Pending for Tx and Rx */
-
-	/* Channel Control Register (CCR)
-	 *
-	 * <15..14>	10	Use 32-bit Tx Control Blocks (TCBs)
-	 * <13>		0	Trigger Tx on SW Command Disabled
-	 * <12>		0	Flag Preamble Disabled
-	 * <11..10>	00	Preamble Length
-	 * <9..8>	00	Preamble Pattern
-	 * <7..6>	10	Use 32-bit Rx status Blocks (RSBs)
-	 * <5>		0	Trigger Rx on SW Command Disabled
-	 * <4..0>	0	reserved
-	 *
-	 *	1000 0000 1000 0000 = 0x8080
-	 */
-
-	RegValue = 0x8080;
-
-	switch ( info->params.preamble_length ) {
-	case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
-	case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
-	case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 | BIT10; break;
-	}
-
-	switch ( info->params.preamble ) {
-	case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 | BIT12; break;
-	case HDLC_PREAMBLE_PATTERN_ONES:  RegValue |= BIT8; break;
-	case HDLC_PREAMBLE_PATTERN_10:    RegValue |= BIT9; break;
-	case HDLC_PREAMBLE_PATTERN_01:    RegValue |= BIT9 | BIT8; break;
-	}
-
-	usc_OutReg( info, CCR, RegValue );
-
-
-	/*
-	 * Burst/Dwell Control Register
-	 *
-	 * <15..8>	0x20	Maximum number of transfers per bus grant
-	 * <7..0>	0x00	Maximum number of clock cycles per bus grant
-	 */
-
-	/* don't limit bus occupancy on PCI adapter */
-	usc_OutDmaReg( info, BDCR, 0x0000 );
-
-	usc_stop_transmitter(info);
-	usc_stop_receiver(info);
-	
-}	/* end of usc_set_sdlc_mode() */
-
-/* usc_enable_loopback()
- *
- * Set the 16C32 for internal loopback mode.
- * The TxCLK and RxCLK signals are generated from the BRG0 and
- * the TxD is looped back to the RxD internally.
- *
- * Arguments:		info	pointer to device instance data
- *			enable	1 = enable loopback, 0 = disable
- * Return Value:	None
- */
-static void usc_enable_loopback(struct mgsl_struct *info, int enable)
-{
-	if (enable) {
-		/* blank external TXD output */
-		usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6));
-	
-		/* Clock mode Control Register (CMCR)
-		 *
-		 * <15..14>	00	counter 1 Disabled
-		 * <13..12> 	00	counter 0 Disabled
-		 * <11..10> 	11	BRG1 Input is TxC Pin
-		 * <9..8>	11	BRG0 Input is TxC Pin
-		 * <7..6>	01	DPLL Input is BRG1 Output
-		 * <5..3>	100	TxCLK comes from BRG0
-		 * <2..0>   	100	RxCLK comes from BRG0
-		 *
-		 * 0000 1111 0110 0100 = 0x0f64
-		 */
-
-		usc_OutReg( info, CMCR, 0x0f64 );
-
-		/* Write 16-bit Time Constant for BRG0 */
-		/* use clock speed if available, otherwise use 8 for diagnostics */
-		if (info->params.clock_speed) {
-			usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
-		} else
-			usc_OutReg(info, TC0R, (u16)8);
-
-		/* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
-		   mode = Continuous Set Bit 0 to enable BRG0.  */
-		usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
-
-		/* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
-		usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
-
-		/* set Internal Data loopback mode */
-		info->loopback_bits = 0x300;
-		outw( 0x0300, info->io_base + CCAR );
-	} else {
-		/* enable external TXD output */
-		usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6));
-	
-		/* clear Internal Data loopback mode */
-		info->loopback_bits = 0;
-		outw( 0,info->io_base + CCAR );
-	}
-	
-}	/* end of usc_enable_loopback() */
-
-/* usc_enable_aux_clock()
- *
- * Enabled the AUX clock output at the specified frequency.
- *
- * Arguments:
- *
- *	info		pointer to device extension
- *	data_rate	data rate of clock in bits per second
- *			A data rate of 0 disables the AUX clock.
- *
- * Return Value:	None
- */
-static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
-{
-	u32 XtalSpeed;
-	u16 Tc;
-
-	if ( data_rate ) {
-		XtalSpeed = 11059200;
-
-
-		/* Tc = (Xtal/Speed) - 1 */
-		/* If twice the remainder of (Xtal/Speed) is greater than Speed */
-		/* then rounding up gives a more precise time constant. Instead */
-		/* of rounding up and then subtracting 1 we just don't subtract */
-		/* the one in this case. */
-
-
-		Tc = (u16)(XtalSpeed/data_rate);
-		if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
-			Tc--;
-
-		/* Write 16-bit Time Constant for BRG0 */
-		usc_OutReg( info, TC0R, Tc );
-
-		/*
-		 * Hardware Configuration Register (HCR)
-		 * Clear Bit 1, BRG0 mode = Continuous
-		 * Set Bit 0 to enable BRG0.
-		 */
-
-		usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
-
-		/* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
-		usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
-	} else {
-		/* data rate == 0 so turn off BRG0 */
-		usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
-	}
-
-}	/* end of usc_enable_aux_clock() */
-
-/*
- *
- * usc_process_rxoverrun_sync()
- *
- *		This function processes a receive overrun by resetting the
- *		receive DMA buffers and issuing a Purge Rx FIFO command
- *		to allow the receiver to continue receiving.
- *
- * Arguments:
- *
- *	info		pointer to device extension
- *
- * Return Value: None
- */
-static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
-{
-	int start_index;
-	int end_index;
-	int frame_start_index;
-	bool start_of_frame_found = false;
-	bool end_of_frame_found = false;
-	bool reprogram_dma = false;
-
-	DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
-	u32 phys_addr;
-
-	usc_DmaCmd( info, DmaCmd_PauseRxChannel );
-	usc_RCmd( info, RCmd_EnterHuntmode );
-	usc_RTCmd( info, RTCmd_PurgeRxFifo );
-
-	/* CurrentRxBuffer points to the 1st buffer of the next */
-	/* possibly available receive frame. */
-	
-	frame_start_index = start_index = end_index = info->current_rx_buffer;
-
-	/* Search for an unfinished string of buffers. This means */
-	/* that a receive frame started (at least one buffer with */
-	/* count set to zero) but there is no terminiting buffer */
-	/* (status set to non-zero). */
-
-	while( !buffer_list[end_index].count )
-	{
-		/* Count field has been reset to zero by 16C32. */
-		/* This buffer is currently in use. */
-
-		if ( !start_of_frame_found )
-		{
-			start_of_frame_found = true;
-			frame_start_index = end_index;
-			end_of_frame_found = false;
-		}
-
-		if ( buffer_list[end_index].status )
-		{
-			/* Status field has been set by 16C32. */
-			/* This is the last buffer of a received frame. */
-
-			/* We want to leave the buffers for this frame intact. */
-			/* Move on to next possible frame. */
-
-			start_of_frame_found = false;
-			end_of_frame_found = true;
-		}
-
-  		/* advance to next buffer entry in linked list */
-  		end_index++;
-  		if ( end_index == info->rx_buffer_count )
-  			end_index = 0;
-
-		if ( start_index == end_index )
-		{
-			/* The entire list has been searched with all Counts == 0 and */
-			/* all Status == 0. The receive buffers are */
-			/* completely screwed, reset all receive buffers! */
-			mgsl_reset_rx_dma_buffers( info );
-			frame_start_index = 0;
-			start_of_frame_found = false;
-			reprogram_dma = true;
-			break;
-		}
-	}
-
-	if ( start_of_frame_found && !end_of_frame_found )
-	{
-		/* There is an unfinished string of receive DMA buffers */
-		/* as a result of the receiver overrun. */
-
-		/* Reset the buffers for the unfinished frame */
-		/* and reprogram the receive DMA controller to start */
-		/* at the 1st buffer of unfinished frame. */
-
-		start_index = frame_start_index;
-
-		do
-		{
-			*((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
-
-  			/* Adjust index for wrap around. */
-  			if ( start_index == info->rx_buffer_count )
-  				start_index = 0;
-
-		} while( start_index != end_index );
-
-		reprogram_dma = true;
-	}
-
-	if ( reprogram_dma )
-	{
-		usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
-		usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
-		usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
-		
-		usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
-		
-		/* This empties the receive FIFO and loads the RCC with RCLR */
-		usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
-
-		/* program 16C32 with physical address of 1st DMA buffer entry */
-		phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
-		usc_OutDmaReg( info, NRARL, (u16)phys_addr );
-		usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
-
-		usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
-		usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
-		usc_EnableInterrupts( info, RECEIVE_STATUS );
-
-		/* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
-		/* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
-
-		usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 );
-		usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
-		usc_DmaCmd( info, DmaCmd_InitRxChannel );
-		if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
-			usc_EnableReceiver(info,ENABLE_AUTO_DCD);
-		else
-			usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
-	}
-	else
-	{
-		/* This empties the receive FIFO and loads the RCC with RCLR */
-		usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
-		usc_RTCmd( info, RTCmd_PurgeRxFifo );
-	}
-
-}	/* end of usc_process_rxoverrun_sync() */
-
-/* usc_stop_receiver()
- *
- *	Disable USC receiver
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void usc_stop_receiver( struct mgsl_struct *info )
-{
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):usc_stop_receiver(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-			 
-	/* Disable receive DMA channel. */
-	/* This also disables receive DMA channel interrupts */
-	usc_DmaCmd( info, DmaCmd_ResetRxChannel );
-
-	usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
-	usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
-	usc_DisableInterrupts( info, RECEIVE_DATA | RECEIVE_STATUS );
-
-	usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
-
-	/* This empties the receive FIFO and loads the RCC with RCLR */
-	usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
-	usc_RTCmd( info, RTCmd_PurgeRxFifo );
-
-	info->rx_enabled = false;
-	info->rx_overflow = false;
-	info->rx_rcc_underrun = false;
-	
-}	/* end of stop_receiver() */
-
-/* usc_start_receiver()
- *
- *	Enable the USC receiver 
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void usc_start_receiver( struct mgsl_struct *info )
-{
-	u32 phys_addr;
-	
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):usc_start_receiver(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	mgsl_reset_rx_dma_buffers( info );
-	usc_stop_receiver( info );
-
-	usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
-	usc_RTCmd( info, RTCmd_PurgeRxFifo );
-
-	if ( info->params.mode == MGSL_MODE_HDLC ||
-		info->params.mode == MGSL_MODE_RAW ) {
-		/* DMA mode Transfers */
-		/* Program the DMA controller. */
-		/* Enable the DMA controller end of buffer interrupt. */
-
-		/* program 16C32 with physical address of 1st DMA buffer entry */
-		phys_addr = info->rx_buffer_list[0].phys_entry;
-		usc_OutDmaReg( info, NRARL, (u16)phys_addr );
-		usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
-
-		usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
-		usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
-		usc_EnableInterrupts( info, RECEIVE_STATUS );
-
-		/* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
-		/* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
-
-		usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 );
-		usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
-		usc_DmaCmd( info, DmaCmd_InitRxChannel );
-		if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
-			usc_EnableReceiver(info,ENABLE_AUTO_DCD);
-		else
-			usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
-	} else {
-		usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
-		usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS);
-		usc_EnableInterrupts(info, RECEIVE_DATA);
-
-		usc_RTCmd( info, RTCmd_PurgeRxFifo );
-		usc_RCmd( info, RCmd_EnterHuntmode );
-
-		usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
-	}
-
-	usc_OutReg( info, CCSR, 0x1020 );
-
-	info->rx_enabled = true;
-
-}	/* end of usc_start_receiver() */
-
-/* usc_start_transmitter()
- *
- *	Enable the USC transmitter and send a transmit frame if
- *	one is loaded in the DMA buffers.
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void usc_start_transmitter( struct mgsl_struct *info )
-{
-	u32 phys_addr;
-	unsigned int FrameSize;
-
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):usc_start_transmitter(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-			 
-	if ( info->xmit_cnt ) {
-
-		/* If auto RTS enabled and RTS is inactive, then assert */
-		/* RTS and set a flag indicating that the driver should */
-		/* negate RTS when the transmission completes. */
-
-		info->drop_rts_on_tx_done = false;
-
-		if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
-			usc_get_serial_signals( info );
-			if ( !(info->serial_signals & SerialSignal_RTS) ) {
-				info->serial_signals |= SerialSignal_RTS;
-				usc_set_serial_signals( info );
-				info->drop_rts_on_tx_done = true;
-			}
-		}
-
-
-		if ( info->params.mode == MGSL_MODE_ASYNC ) {
-			if ( !info->tx_active ) {
-				usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
-				usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
-				usc_EnableInterrupts(info, TRANSMIT_DATA);
-				usc_load_txfifo(info);
-			}
-		} else {
-			/* Disable transmit DMA controller while programming. */
-			usc_DmaCmd( info, DmaCmd_ResetTxChannel );
-			
-			/* Transmit DMA buffer is loaded, so program USC */
-			/* to send the frame contained in the buffers.	 */
-
-			FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
-
-			/* if operating in Raw sync mode, reset the rcc component
-			 * of the tx dma buffer entry, otherwise, the serial controller
-			 * will send a closing sync char after this count.
-			 */
-	    		if ( info->params.mode == MGSL_MODE_RAW )
-				info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
-
-			/* Program the Transmit Character Length Register (TCLR) */
-			/* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
-			usc_OutReg( info, TCLR, (u16)FrameSize );
-
-			usc_RTCmd( info, RTCmd_PurgeTxFifo );
-
-			/* Program the address of the 1st DMA Buffer Entry in linked list */
-			phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
-			usc_OutDmaReg( info, NTARL, (u16)phys_addr );
-			usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
-
-			usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
-			usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
-			usc_EnableInterrupts( info, TRANSMIT_STATUS );
-
-			if ( info->params.mode == MGSL_MODE_RAW &&
-					info->num_tx_dma_buffers > 1 ) {
-			   /* When running external sync mode, attempt to 'stream' transmit  */
-			   /* by filling tx dma buffers as they become available. To do this */
-			   /* we need to enable Tx DMA EOB Status interrupts :               */
-			   /*                                                                */
-			   /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
-			   /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
-
-			   usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
-			   usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
-			}
-
-			/* Initialize Transmit DMA Channel */
-			usc_DmaCmd( info, DmaCmd_InitTxChannel );
-			
-			usc_TCmd( info, TCmd_SendFrame );
-			
-			mod_timer(&info->tx_timer, jiffies +
-					msecs_to_jiffies(5000));
-		}
-		info->tx_active = true;
-	}
-
-	if ( !info->tx_enabled ) {
-		info->tx_enabled = true;
-		if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
-			usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
-		else
-			usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
-	}
-
-}	/* end of usc_start_transmitter() */
-
-/* usc_stop_transmitter()
- *
- *	Stops the transmitter and DMA
- *
- * Arguments:		info	pointer to device isntance data
- * Return Value:	None
- */
-static void usc_stop_transmitter( struct mgsl_struct *info )
-{
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):usc_stop_transmitter(%s)\n",
-			 __FILE__,__LINE__, info->device_name );
-			 
-	del_timer(&info->tx_timer);	
-			 
-	usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
-	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
-	usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
-
-	usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
-	usc_DmaCmd( info, DmaCmd_ResetTxChannel );
-	usc_RTCmd( info, RTCmd_PurgeTxFifo );
-
-	info->tx_enabled = false;
-	info->tx_active = false;
-
-}	/* end of usc_stop_transmitter() */
-
-/* usc_load_txfifo()
- *
- *	Fill the transmit FIFO until the FIFO is full or
- *	there is no more data to load.
- *
- * Arguments:		info	pointer to device extension (instance data)
- * Return Value:	None
- */
-static void usc_load_txfifo( struct mgsl_struct *info )
-{
-	int Fifocount;
-	u8 TwoBytes[2];
-	
-	if ( !info->xmit_cnt && !info->x_char )
-		return; 
-		
-	/* Select transmit FIFO status readback in TICR */
-	usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
-
-	/* load the Transmit FIFO until FIFOs full or all data sent */
-
-	while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
-		/* there is more space in the transmit FIFO and */
-		/* there is more data in transmit buffer */
-
-		if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
- 			/* write a 16-bit word from transmit buffer to 16C32 */
-				
-			TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
-			info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-			TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
-			info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-			
-			outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
-				
-			info->xmit_cnt -= 2;
-			info->icount.tx += 2;
-		} else {
-			/* only 1 byte left to transmit or 1 FIFO slot left */
-			
-			outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
-				info->io_base + CCAR );
-			
-			if (info->x_char) {
-				/* transmit pending high priority char */
-				outw( info->x_char,info->io_base + CCAR );
-				info->x_char = 0;
-			} else {
-				outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
-				info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-				info->xmit_cnt--;
-			}
-			info->icount.tx++;
-		}
-	}
-
-}	/* end of usc_load_txfifo() */
-
-/* usc_reset()
- *
- *	Reset the adapter to a known state and prepare it for further use.
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void usc_reset( struct mgsl_struct *info )
-{
-	int i;
-	u32 readval;
-
-	/* Set BIT30 of Misc Control Register */
-	/* (Local Control Register 0x50) to force reset of USC. */
-
-	volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
-	u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
-
-	info->misc_ctrl_value |= BIT30;
-	*MiscCtrl = info->misc_ctrl_value;
-
-	/*
-	 * Force at least 170ns delay before clearing reset bit.  Each read from
-	 * LCR takes at least 30ns so 10 times for 300ns to be safe.
-	 */
-	for(i=0;i<10;i++)
-		readval = *MiscCtrl;
-
-	info->misc_ctrl_value &= ~BIT30;
-	*MiscCtrl = info->misc_ctrl_value;
-
-	*LCR0BRDR = BUS_DESCRIPTOR(
-		1,		// Write Strobe Hold (0-3)
-		2,		// Write Strobe Delay (0-3)
-		2,		// Read Strobe Delay  (0-3)
-		0,		// NWDD (Write data-data) (0-3)
-		4,		// NWAD (Write Addr-data) (0-31)
-		0,		// NXDA (Read/Write Data-Addr) (0-3)
-		0,		// NRDD (Read Data-Data) (0-3)
-		5		// NRAD (Read Addr-Data) (0-31)
-		);
-
-	info->mbre_bit = 0;
-	info->loopback_bits = 0;
-	info->usc_idle_mode = 0;
-
-	/*
-	 * Program the Bus Configuration Register (BCR)
-	 *
-	 * <15>		0	Don't use separate address
-	 * <14..6>	0	reserved
-	 * <5..4>	00	IAckmode = Default, don't care
-	 * <3>		1	Bus Request Totem Pole output
-	 * <2>		1	Use 16 Bit data bus
-	 * <1>		0	IRQ Totem Pole output
-	 * <0>		0	Don't Shift Right Addr
-	 *
-	 * 0000 0000 0000 1100 = 0x000c
-	 *
-	 * By writing to io_base + SDPIN the Wait/Ack pin is
-	 * programmed to work as a Wait pin.
-	 */
-	
-	outw( 0x000c,info->io_base + SDPIN );
-
-
-	outw( 0,info->io_base );
-	outw( 0,info->io_base + CCAR );
-
-	/* select little endian byte ordering */
-	usc_RTCmd( info, RTCmd_SelectLittleEndian );
-
-
-	/* Port Control Register (PCR)
-	 *
-	 * <15..14>	11	Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
-	 * <13..12>	11	Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
-	 * <11..10> 	00	Port 5 is Input (No Connect, Don't Care)
-	 * <9..8> 	00	Port 4 is Input (No Connect, Don't Care)
-	 * <7..6>	11	Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
-	 * <5..4>	11	Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
-	 * <3..2>	01	Port 1 is Input (Dedicated RxC)
-	 * <1..0>	01	Port 0 is Input (Dedicated TxC)
-	 *
-	 *	1111 0000 1111 0101 = 0xf0f5
-	 */
-
-	usc_OutReg( info, PCR, 0xf0f5 );
-
-
-	/*
-	 * Input/Output Control Register
-	 *
-	 * <15..14>	00	CTS is active low input
-	 * <13..12>	00	DCD is active low input
-	 * <11..10>	00	TxREQ pin is input (DSR)
-	 * <9..8>	00	RxREQ pin is input (RI)
-	 * <7..6>	00	TxD is output (Transmit Data)
-	 * <5..3>	000	TxC Pin in Input (14.7456MHz Clock)
-	 * <2..0>	100	RxC is Output (drive with BRG0)
-	 *
-	 *	0000 0000 0000 0100 = 0x0004
-	 */
-
-	usc_OutReg( info, IOCR, 0x0004 );
-
-}	/* end of usc_reset() */
-
-/* usc_set_async_mode()
- *
- *	Program adapter for asynchronous communications.
- *
- * Arguments:		info		pointer to device instance data
- * Return Value:	None
- */
-static void usc_set_async_mode( struct mgsl_struct *info )
-{
-	u16 RegValue;
-
-	/* disable interrupts while programming USC */
-	usc_DisableMasterIrqBit( info );
-
-	outw( 0, info->io_base ); 			/* clear Master Bus Enable (DCAR) */
-	usc_DmaCmd( info, DmaCmd_ResetAllChannels );	/* disable both DMA channels */
-
-	usc_loopback_frame( info );
-
-	/* Channel mode Register (CMR)
-	 *
-	 * <15..14>	00	Tx Sub modes, 00 = 1 Stop Bit
-	 * <13..12>	00	              00 = 16X Clock
-	 * <11..8>	0000	Transmitter mode = Asynchronous
-	 * <7..6>	00	reserved?
-	 * <5..4>	00	Rx Sub modes, 00 = 16X Clock
-	 * <3..0>	0000	Receiver mode = Asynchronous
-	 *
-	 * 0000 0000 0000 0000 = 0x0
-	 */
-
-	RegValue = 0;
-	if ( info->params.stop_bits != 1 )
-		RegValue |= BIT14;
-	usc_OutReg( info, CMR, RegValue );
-
-	
-	/* Receiver mode Register (RMR)
-	 *
-	 * <15..13>	000	encoding = None
-	 * <12..08>	00000	reserved (Sync Only)
-	 * <7..6>   	00	Even parity
-	 * <5>		0	parity disabled
-	 * <4..2>	000	Receive Char Length = 8 bits
-	 * <1..0>	00	Disable Receiver
-	 *
-	 * 0000 0000 0000 0000 = 0x0
-	 */
-
-	RegValue = 0;
-
-	if ( info->params.data_bits != 8 )
-		RegValue |= BIT4 | BIT3 | BIT2;
-
-	if ( info->params.parity != ASYNC_PARITY_NONE ) {
-		RegValue |= BIT5;
-		if ( info->params.parity != ASYNC_PARITY_ODD )
-			RegValue |= BIT6;
-	}
-
-	usc_OutReg( info, RMR, RegValue );
-
-
-	/* Set IRQ trigger level */
-
-	usc_RCmd( info, RCmd_SelectRicrIntLevel );
-
-	
-	/* Receive Interrupt Control Register (RICR)
-	 *
-	 * <15..8>	?		RxFIFO IRQ Request Level
-	 *
-	 * Note: For async mode the receive FIFO level must be set
-	 * to 0 to avoid the situation where the FIFO contains fewer bytes
-	 * than the trigger level and no more data is expected.
-	 *
-	 * <7>		0		Exited Hunt IA (Interrupt Arm)
-	 * <6>		0		Idle Received IA
-	 * <5>		0		Break/Abort IA
-	 * <4>		0		Rx Bound IA
-	 * <3>		0		Queued status reflects oldest byte in FIFO
-	 * <2>		0		Abort/PE IA
-	 * <1>		0		Rx Overrun IA
-	 * <0>		0		Select TC0 value for readback
-	 *
-	 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
-	 */
-	
-	usc_OutReg( info, RICR, 0x0000 );
-
-	usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
-	usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
-
-	
-	/* Transmit mode Register (TMR)
-	 *
-	 * <15..13>	000	encoding = None
-	 * <12..08>	00000	reserved (Sync Only)
-	 * <7..6>	00	Transmit parity Even
-	 * <5>		0	Transmit parity Disabled
-	 * <4..2>	000	Tx Char Length = 8 bits
-	 * <1..0>	00	Disable Transmitter
-	 *
-	 * 0000 0000 0000 0000 = 0x0
-	 */
-
-	RegValue = 0;
-
-	if ( info->params.data_bits != 8 )
-		RegValue |= BIT4 | BIT3 | BIT2;
-
-	if ( info->params.parity != ASYNC_PARITY_NONE ) {
-		RegValue |= BIT5;
-		if ( info->params.parity != ASYNC_PARITY_ODD )
-			RegValue |= BIT6;
-	}
-
-	usc_OutReg( info, TMR, RegValue );
-
-	usc_set_txidle( info );
-
-
-	/* Set IRQ trigger level */
-
-	usc_TCmd( info, TCmd_SelectTicrIntLevel );
-
-	
-	/* Transmit Interrupt Control Register (TICR)
-	 *
-	 * <15..8>	?	Transmit FIFO IRQ Level
-	 * <7>		0	Present IA (Interrupt Arm)
-	 * <6>		1	Idle Sent IA
-	 * <5>		0	Abort Sent IA
-	 * <4>		0	EOF/EOM Sent IA
-	 * <3>		0	CRC Sent IA
-	 * <2>		0	1 = Wait for SW Trigger to Start Frame
-	 * <1>		0	Tx Underrun IA
-	 * <0>		0	TC0 constant on read back
-	 *
-	 *	0000 0000 0100 0000 = 0x0040
-	 */
-
-	usc_OutReg( info, TICR, 0x1f40 );
-
-	usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
-	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
-
-	usc_enable_async_clock( info, info->params.data_rate );
-
-	
-	/* Channel Control/status Register (CCSR)
-	 *
-	 * <15>		X	RCC FIFO Overflow status (RO)
-	 * <14>		X	RCC FIFO Not Empty status (RO)
-	 * <13>		0	1 = Clear RCC FIFO (WO)
-	 * <12>		X	DPLL in Sync status (RO)
-	 * <11>		X	DPLL 2 Missed Clocks status (RO)
-	 * <10>		X	DPLL 1 Missed Clock status (RO)
-	 * <9..8>	00	DPLL Resync on rising and falling edges (RW)
-	 * <7>		X	SDLC Loop On status (RO)
-	 * <6>		X	SDLC Loop Send status (RO)
-	 * <5>		1	Bypass counters for TxClk and RxClk (RW)
-	 * <4..2>   	000	Last Char of SDLC frame has 8 bits (RW)
-	 * <1..0>   	00	reserved
-	 *
-	 *	0000 0000 0010 0000 = 0x0020
-	 */
-	
-	usc_OutReg( info, CCSR, 0x0020 );
-
-	usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
-			      RECEIVE_DATA + RECEIVE_STATUS );
-
-	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
-				RECEIVE_DATA + RECEIVE_STATUS );
-
-	usc_EnableMasterIrqBit( info );
-
-	if (info->params.loopback) {
-		info->loopback_bits = 0x300;
-		outw(0x0300, info->io_base + CCAR);
-	}
-
-}	/* end of usc_set_async_mode() */
-
-/* usc_loopback_frame()
- *
- *	Loop back a small (2 byte) dummy SDLC frame.
- *	Interrupts and DMA are NOT used. The purpose of this is to
- *	clear any 'stale' status info left over from running in	async mode.
- *
- *	The 16C32 shows the strange behaviour of marking the 1st
- *	received SDLC frame with a CRC error even when there is no
- *	CRC error. To get around this a small dummy from of 2 bytes
- *	is looped back when switching from async to sync mode.
- *
- * Arguments:		info		pointer to device instance data
- * Return Value:	None
- */
-static void usc_loopback_frame( struct mgsl_struct *info )
-{
-	int i;
-	unsigned long oldmode = info->params.mode;
-
-	info->params.mode = MGSL_MODE_HDLC;
-	
-	usc_DisableMasterIrqBit( info );
-
-	usc_set_sdlc_mode( info );
-	usc_enable_loopback( info, 1 );
-
-	/* Write 16-bit Time Constant for BRG0 */
-	usc_OutReg( info, TC0R, 0 );
-	
-	/* Channel Control Register (CCR)
-	 *
-	 * <15..14>	00	Don't use 32-bit Tx Control Blocks (TCBs)
-	 * <13>		0	Trigger Tx on SW Command Disabled
-	 * <12>		0	Flag Preamble Disabled
-	 * <11..10>	00	Preamble Length = 8-Bits
-	 * <9..8>	01	Preamble Pattern = flags
-	 * <7..6>	10	Don't use 32-bit Rx status Blocks (RSBs)
-	 * <5>		0	Trigger Rx on SW Command Disabled
-	 * <4..0>	0	reserved
-	 *
-	 *	0000 0001 0000 0000 = 0x0100
-	 */
-
-	usc_OutReg( info, CCR, 0x0100 );
-
-	/* SETUP RECEIVER */
-	usc_RTCmd( info, RTCmd_PurgeRxFifo );
-	usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
-
-	/* SETUP TRANSMITTER */
-	/* Program the Transmit Character Length Register (TCLR) */
-	/* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
-	usc_OutReg( info, TCLR, 2 );
-	usc_RTCmd( info, RTCmd_PurgeTxFifo );
-
-	/* unlatch Tx status bits, and start transmit channel. */
-	usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
-	outw(0,info->io_base + DATAREG);
-
-	/* ENABLE TRANSMITTER */
-	usc_TCmd( info, TCmd_SendFrame );
-	usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
-							
-	/* WAIT FOR RECEIVE COMPLETE */
-	for (i=0 ; i<1000 ; i++)
-		if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1))
-			break;
-
-	/* clear Internal Data loopback mode */
-	usc_enable_loopback(info, 0);
-
-	usc_EnableMasterIrqBit(info);
-
-	info->params.mode = oldmode;
-
-}	/* end of usc_loopback_frame() */
-
-/* usc_set_sync_mode()	Programs the USC for SDLC communications.
- *
- * Arguments:		info	pointer to adapter info structure
- * Return Value:	None
- */
-static void usc_set_sync_mode( struct mgsl_struct *info )
-{
-	usc_loopback_frame( info );
-	usc_set_sdlc_mode( info );
-
-	usc_enable_aux_clock(info, info->params.clock_speed);
-
-	if (info->params.loopback)
-		usc_enable_loopback(info,1);
-
-}	/* end of mgsl_set_sync_mode() */
-
-/* usc_set_txidle()	Set the HDLC idle mode for the transmitter.
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void usc_set_txidle( struct mgsl_struct *info )
-{
-	u16 usc_idle_mode = IDLEMODE_FLAGS;
-
-	/* Map API idle mode to USC register bits */
-
-	switch( info->idle_mode ){
-	case HDLC_TXIDLE_FLAGS:			usc_idle_mode = IDLEMODE_FLAGS; break;
-	case HDLC_TXIDLE_ALT_ZEROS_ONES:	usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
-	case HDLC_TXIDLE_ZEROS:			usc_idle_mode = IDLEMODE_ZERO; break;
-	case HDLC_TXIDLE_ONES:			usc_idle_mode = IDLEMODE_ONE; break;
-	case HDLC_TXIDLE_ALT_MARK_SPACE:	usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
-	case HDLC_TXIDLE_SPACE:			usc_idle_mode = IDLEMODE_SPACE; break;
-	case HDLC_TXIDLE_MARK:			usc_idle_mode = IDLEMODE_MARK; break;
-	}
-
-	info->usc_idle_mode = usc_idle_mode;
-	//usc_OutReg(info, TCSR, usc_idle_mode);
-	info->tcsr_value &= ~IDLEMODE_MASK;	/* clear idle mode bits */
-	info->tcsr_value += usc_idle_mode;
-	usc_OutReg(info, TCSR, info->tcsr_value);
-
-	/*
-	 * if SyncLink WAN adapter is running in external sync mode, the
-	 * transmitter has been set to Monosync in order to try to mimic
-	 * a true raw outbound bit stream. Monosync still sends an open/close
-	 * sync char at the start/end of a frame. Try to match those sync
-	 * patterns to the idle mode set here
-	 */
-	if ( info->params.mode == MGSL_MODE_RAW ) {
-		unsigned char syncpat = 0;
-		switch( info->idle_mode ) {
-		case HDLC_TXIDLE_FLAGS:
-			syncpat = 0x7e;
-			break;
-		case HDLC_TXIDLE_ALT_ZEROS_ONES:
-			syncpat = 0x55;
-			break;
-		case HDLC_TXIDLE_ZEROS:
-		case HDLC_TXIDLE_SPACE:
-			syncpat = 0x00;
-			break;
-		case HDLC_TXIDLE_ONES:
-		case HDLC_TXIDLE_MARK:
-			syncpat = 0xff;
-			break;
-		case HDLC_TXIDLE_ALT_MARK_SPACE:
-			syncpat = 0xaa;
-			break;
-		}
-
-		usc_SetTransmitSyncChars(info,syncpat,syncpat);
-	}
-
-}	/* end of usc_set_txidle() */
-
-/* usc_get_serial_signals()
- *
- *	Query the adapter for the state of the V24 status (input) signals.
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void usc_get_serial_signals( struct mgsl_struct *info )
-{
-	u16 status;
-
-	/* clear all serial signals except RTS and DTR */
-	info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
-
-	/* Read the Misc Interrupt status Register (MISR) to get */
-	/* the V24 status signals. */
-
-	status = usc_InReg( info, MISR );
-
-	/* set serial signal bits to reflect MISR */
-
-	if ( status & MISCSTATUS_CTS )
-		info->serial_signals |= SerialSignal_CTS;
-
-	if ( status & MISCSTATUS_DCD )
-		info->serial_signals |= SerialSignal_DCD;
-
-	if ( status & MISCSTATUS_RI )
-		info->serial_signals |= SerialSignal_RI;
-
-	if ( status & MISCSTATUS_DSR )
-		info->serial_signals |= SerialSignal_DSR;
-
-}	/* end of usc_get_serial_signals() */
-
-/* usc_set_serial_signals()
- *
- *	Set the state of RTS and DTR based on contents of
- *	serial_signals member of device extension.
- *	
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void usc_set_serial_signals( struct mgsl_struct *info )
-{
-	u16 Control;
-	unsigned char V24Out = info->serial_signals;
-
-	/* get the current value of the Port Control Register (PCR) */
-
-	Control = usc_InReg( info, PCR );
-
-	if ( V24Out & SerialSignal_RTS )
-		Control &= ~(BIT6);
-	else
-		Control |= BIT6;
-
-	if ( V24Out & SerialSignal_DTR )
-		Control &= ~(BIT4);
-	else
-		Control |= BIT4;
-
-	usc_OutReg( info, PCR, Control );
-
-}	/* end of usc_set_serial_signals() */
-
-/* usc_enable_async_clock()
- *
- *	Enable the async clock at the specified frequency.
- *
- * Arguments:		info		pointer to device instance data
- *			data_rate	data rate of clock in bps
- *					0 disables the AUX clock.
- * Return Value:	None
- */
-static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
-{
-	if ( data_rate )	{
-		/*
-		 * Clock mode Control Register (CMCR)
-		 * 
-		 * <15..14>     00      counter 1 Disabled
-		 * <13..12>     00      counter 0 Disabled
-		 * <11..10>     11      BRG1 Input is TxC Pin
-		 * <9..8>       11      BRG0 Input is TxC Pin
-		 * <7..6>       01      DPLL Input is BRG1 Output
-		 * <5..3>       100     TxCLK comes from BRG0
-		 * <2..0>       100     RxCLK comes from BRG0
-		 *
-		 * 0000 1111 0110 0100 = 0x0f64
-		 */
-		
-		usc_OutReg( info, CMCR, 0x0f64 );
-
-
-		/*
-		 * Write 16-bit Time Constant for BRG0
-		 * Time Constant = (ClkSpeed / data_rate) - 1
-		 * ClkSpeed = 921600 (ISA), 691200 (PCI)
-		 */
-
-		usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
-		
-		/*
-		 * Hardware Configuration Register (HCR)
-		 * Clear Bit 1, BRG0 mode = Continuous
-		 * Set Bit 0 to enable BRG0.
-		 */
-
-		usc_OutReg( info, HCR,
-			    (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
-
-
-		/* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
-
-		usc_OutReg( info, IOCR,
-			    (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
-	} else {
-		/* data rate == 0 so turn off BRG0 */
-		usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
-	}
-
-}	/* end of usc_enable_async_clock() */
-
-/*
- * Buffer Structures:
- *
- * Normal memory access uses virtual addresses that can make discontiguous
- * physical memory pages appear to be contiguous in the virtual address
- * space (the processors memory mapping handles the conversions).
- *
- * DMA transfers require physically contiguous memory. This is because
- * the DMA system controller and DMA bus masters deal with memory using
- * only physical addresses.
- *
- * This causes a problem under Windows NT when large DMA buffers are
- * needed. Fragmentation of the nonpaged pool prevents allocations of
- * physically contiguous buffers larger than the PAGE_SIZE.
- *
- * However the 16C32 supports Bus Master Scatter/Gather DMA which
- * allows DMA transfers to physically discontiguous buffers. Information
- * about each data transfer buffer is contained in a memory structure
- * called a 'buffer entry'. A list of buffer entries is maintained
- * to track and control the use of the data transfer buffers.
- *
- * To support this strategy we will allocate sufficient PAGE_SIZE
- * contiguous memory buffers to allow for the total required buffer
- * space.
- *
- * The 16C32 accesses the list of buffer entries using Bus Master
- * DMA. Control information is read from the buffer entries by the
- * 16C32 to control data transfers. status information is written to
- * the buffer entries by the 16C32 to indicate the status of completed
- * transfers.
- *
- * The CPU writes control information to the buffer entries to control
- * the 16C32 and reads status information from the buffer entries to
- * determine information about received and transmitted frames.
- *
- * Because the CPU and 16C32 (adapter) both need simultaneous access
- * to the buffer entries, the buffer entry memory is allocated with
- * HalAllocateCommonBuffer(). This restricts the size of the buffer
- * entry list to PAGE_SIZE.
- *
- * The actual data buffers on the other hand will only be accessed
- * by the CPU or the adapter but not by both simultaneously. This allows
- * Scatter/Gather packet based DMA procedures for using physically
- * discontiguous pages.
- */
-
-/*
- * mgsl_reset_tx_dma_buffers()
- *
- * 	Set the count for all transmit buffers to 0 to indicate the
- * 	buffer is available for use and set the current buffer to the
- * 	first buffer. This effectively makes all buffers free and
- * 	discards any data in buffers.
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
-{
-	unsigned int i;
-
-	for ( i = 0; i < info->tx_buffer_count; i++ ) {
-		*((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
-	}
-
-	info->current_tx_buffer = 0;
-	info->start_tx_dma_buffer = 0;
-	info->tx_dma_buffers_used = 0;
-
-	info->get_tx_holding_index = 0;
-	info->put_tx_holding_index = 0;
-	info->tx_holding_count = 0;
-
-}	/* end of mgsl_reset_tx_dma_buffers() */
-
-/*
- * num_free_tx_dma_buffers()
- *
- * 	returns the number of free tx dma buffers available
- *
- * Arguments:		info	pointer to device instance data
- * Return Value:	number of free tx dma buffers
- */
-static int num_free_tx_dma_buffers(struct mgsl_struct *info)
-{
-	return info->tx_buffer_count - info->tx_dma_buffers_used;
-}
-
-/*
- * mgsl_reset_rx_dma_buffers()
- * 
- * 	Set the count for all receive buffers to DMABUFFERSIZE
- * 	and set the current buffer to the first buffer. This effectively
- * 	makes all buffers free and discards any data in buffers.
- * 
- * Arguments:		info	pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
-{
-	unsigned int i;
-
-	for ( i = 0; i < info->rx_buffer_count; i++ ) {
-		*((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
-//		info->rx_buffer_list[i].count = DMABUFFERSIZE;
-//		info->rx_buffer_list[i].status = 0;
-	}
-
-	info->current_rx_buffer = 0;
-
-}	/* end of mgsl_reset_rx_dma_buffers() */
-
-/*
- * mgsl_free_rx_frame_buffers()
- * 
- * 	Free the receive buffers used by a received SDLC
- * 	frame such that the buffers can be reused.
- * 
- * Arguments:
- * 
- * 	info			pointer to device instance data
- * 	StartIndex		index of 1st receive buffer of frame
- * 	EndIndex		index of last receive buffer of frame
- * 
- * Return Value:	None
- */
-static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
-{
-	bool Done = false;
-	DMABUFFERENTRY *pBufEntry;
-	unsigned int Index;
-
-	/* Starting with 1st buffer entry of the frame clear the status */
-	/* field and set the count field to DMA Buffer Size. */
-
-	Index = StartIndex;
-
-	while( !Done ) {
-		pBufEntry = &(info->rx_buffer_list[Index]);
-
-		if ( Index == EndIndex ) {
-			/* This is the last buffer of the frame! */
-			Done = true;
-		}
-
-		/* reset current buffer for reuse */
-//		pBufEntry->status = 0;
-//		pBufEntry->count = DMABUFFERSIZE;
-		*((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
-
-		/* advance to next buffer entry in linked list */
-		Index++;
-		if ( Index == info->rx_buffer_count )
-			Index = 0;
-	}
-
-	/* set current buffer to next buffer after last buffer of frame */
-	info->current_rx_buffer = Index;
-
-}	/* end of free_rx_frame_buffers() */
-
-/* mgsl_get_rx_frame()
- * 
- * 	This function attempts to return a received SDLC frame from the
- * 	receive DMA buffers. Only frames received without errors are returned.
- *
- * Arguments:	 	info	pointer to device extension
- * Return Value:	true if frame returned, otherwise false
- */
-static bool mgsl_get_rx_frame(struct mgsl_struct *info)
-{
-	unsigned int StartIndex, EndIndex;	/* index of 1st and last buffers of Rx frame */
-	unsigned short status;
-	DMABUFFERENTRY *pBufEntry;
-	unsigned int framesize = 0;
-	bool ReturnCode = false;
-	unsigned long flags;
-	struct tty_struct *tty = info->port.tty;
-	bool return_frame = false;
-	
-	/*
-	 * current_rx_buffer points to the 1st buffer of the next available
-	 * receive frame. To find the last buffer of the frame look for
-	 * a non-zero status field in the buffer entries. (The status
-	 * field is set by the 16C32 after completing a receive frame.
-	 */
-
-	StartIndex = EndIndex = info->current_rx_buffer;
-
-	while( !info->rx_buffer_list[EndIndex].status ) {
-		/*
-		 * If the count field of the buffer entry is non-zero then
-		 * this buffer has not been used. (The 16C32 clears the count
-		 * field when it starts using the buffer.) If an unused buffer
-		 * is encountered then there are no frames available.
-		 */
-
-		if ( info->rx_buffer_list[EndIndex].count )
-			goto Cleanup;
-
-		/* advance to next buffer entry in linked list */
-		EndIndex++;
-		if ( EndIndex == info->rx_buffer_count )
-			EndIndex = 0;
-
-		/* if entire list searched then no frame available */
-		if ( EndIndex == StartIndex ) {
-			/* If this occurs then something bad happened,
-			 * all buffers have been 'used' but none mark
-			 * the end of a frame. Reset buffers and receiver.
-			 */
-
-			if ( info->rx_enabled ){
-				spin_lock_irqsave(&info->irq_spinlock,flags);
-				usc_start_receiver(info);
-				spin_unlock_irqrestore(&info->irq_spinlock,flags);
-			}
-			goto Cleanup;
-		}
-	}
-
-
-	/* check status of receive frame */
-	
-	status = info->rx_buffer_list[EndIndex].status;
-
-	if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
-			RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) {
-		if ( status & RXSTATUS_SHORT_FRAME )
-			info->icount.rxshort++;
-		else if ( status & RXSTATUS_ABORT )
-			info->icount.rxabort++;
-		else if ( status & RXSTATUS_OVERRUN )
-			info->icount.rxover++;
-		else {
-			info->icount.rxcrc++;
-			if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
-				return_frame = true;
-		}
-		framesize = 0;
-#if SYNCLINK_GENERIC_HDLC
-		{
-			info->netdev->stats.rx_errors++;
-			info->netdev->stats.rx_frame_errors++;
-		}
-#endif
-	} else
-		return_frame = true;
-
-	if ( return_frame ) {
-		/* receive frame has no errors, get frame size.
-		 * The frame size is the starting value of the RCC (which was
-		 * set to 0xffff) minus the ending value of the RCC (decremented
-		 * once for each receive character) minus 2 for the 16-bit CRC.
-		 */
-
-		framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
-
-		/* adjust frame size for CRC if any */
-		if ( info->params.crc_type == HDLC_CRC_16_CCITT )
-			framesize -= 2;
-		else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
-			framesize -= 4;		
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
-			__FILE__,__LINE__,info->device_name,status,framesize);
-			
-	if ( debug_level >= DEBUG_LEVEL_DATA )
-		mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
-			min_t(int, framesize, DMABUFFERSIZE),0);
-		
-	if (framesize) {
-		if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
-				((framesize+1) > info->max_frame_size) ) ||
-			(framesize > info->max_frame_size) )
-			info->icount.rxlong++;
-		else {
-			/* copy dma buffer(s) to contiguous intermediate buffer */
-			int copy_count = framesize;
-			int index = StartIndex;
-			unsigned char *ptmp = info->intermediate_rxbuffer;
-
-			if ( !(status & RXSTATUS_CRC_ERROR))
-				info->icount.rxok++;
-			
-			while(copy_count) {
-				int partial_count;
-				if ( copy_count > DMABUFFERSIZE )
-					partial_count = DMABUFFERSIZE;
-				else
-					partial_count = copy_count;
-			
-				pBufEntry = &(info->rx_buffer_list[index]);
-				memcpy( ptmp, pBufEntry->virt_addr, partial_count );
-				ptmp += partial_count;
-				copy_count -= partial_count;
-				
-				if ( ++index == info->rx_buffer_count )
-					index = 0;
-			}
-
-			if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
-				++framesize;
-				*ptmp = (status & RXSTATUS_CRC_ERROR ?
-						RX_CRC_ERROR :
-						RX_OK);
-
-				if ( debug_level >= DEBUG_LEVEL_DATA )
-					printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
-						__FILE__,__LINE__,info->device_name,
-						*ptmp);
-			}
-
-#if SYNCLINK_GENERIC_HDLC
-			if (info->netcount)
-				hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
-			else
-#endif
-				ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
-		}
-	}
-	/* Free the buffers used by this frame. */
-	mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
-
-	ReturnCode = true;
-
-Cleanup:
-
-	if ( info->rx_enabled && info->rx_overflow ) {
-		/* The receiver needs to restarted because of 
-		 * a receive overflow (buffer or FIFO). If the 
-		 * receive buffers are now empty, then restart receiver.
-		 */
-
-		if ( !info->rx_buffer_list[EndIndex].status &&
-			info->rx_buffer_list[EndIndex].count ) {
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			usc_start_receiver(info);
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-		}
-	}
-
-	return ReturnCode;
-
-}	/* end of mgsl_get_rx_frame() */
-
-/* mgsl_get_raw_rx_frame()
- *
- *     	This function attempts to return a received frame from the
- *	receive DMA buffers when running in external loop mode. In this mode,
- *	we will return at most one DMABUFFERSIZE frame to the application.
- *	The USC receiver is triggering off of DCD going active to start a new
- *	frame, and DCD going inactive to terminate the frame (similar to
- *	processing a closing flag character).
- *
- *	In this routine, we will return DMABUFFERSIZE "chunks" at a time.
- *	If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
- * 	status field and the RCC field will indicate the length of the
- *	entire received frame. We take this RCC field and get the modulus
- *	of RCC and DMABUFFERSIZE to determine if number of bytes in the
- *	last Rx DMA buffer and return that last portion of the frame.
- *
- * Arguments:	 	info	pointer to device extension
- * Return Value:	true if frame returned, otherwise false
- */
-static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
-{
-	unsigned int CurrentIndex, NextIndex;
-	unsigned short status;
-	DMABUFFERENTRY *pBufEntry;
-	unsigned int framesize = 0;
-	bool ReturnCode = false;
-	unsigned long flags;
-	struct tty_struct *tty = info->port.tty;
-
-	/*
- 	 * current_rx_buffer points to the 1st buffer of the next available
-	 * receive frame. The status field is set by the 16C32 after
-	 * completing a receive frame. If the status field of this buffer
-	 * is zero, either the USC is still filling this buffer or this
-	 * is one of a series of buffers making up a received frame.
-	 *
-	 * If the count field of this buffer is zero, the USC is either
-	 * using this buffer or has used this buffer. Look at the count
-	 * field of the next buffer. If that next buffer's count is
-	 * non-zero, the USC is still actively using the current buffer.
-	 * Otherwise, if the next buffer's count field is zero, the
-	 * current buffer is complete and the USC is using the next
-	 * buffer.
-	 */
-	CurrentIndex = NextIndex = info->current_rx_buffer;
-	++NextIndex;
-	if ( NextIndex == info->rx_buffer_count )
-		NextIndex = 0;
-
-	if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
-		(info->rx_buffer_list[CurrentIndex].count == 0 &&
-			info->rx_buffer_list[NextIndex].count == 0)) {
-		/*
-	 	 * Either the status field of this dma buffer is non-zero
-		 * (indicating the last buffer of a receive frame) or the next
-	 	 * buffer is marked as in use -- implying this buffer is complete
-		 * and an intermediate buffer for this received frame.
-	 	 */
-
-		status = info->rx_buffer_list[CurrentIndex].status;
-
-		if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
-				RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) {
-			if ( status & RXSTATUS_SHORT_FRAME )
-				info->icount.rxshort++;
-			else if ( status & RXSTATUS_ABORT )
-				info->icount.rxabort++;
-			else if ( status & RXSTATUS_OVERRUN )
-				info->icount.rxover++;
-			else
-				info->icount.rxcrc++;
-			framesize = 0;
-		} else {
-			/*
-			 * A receive frame is available, get frame size and status.
-			 *
-			 * The frame size is the starting value of the RCC (which was
-			 * set to 0xffff) minus the ending value of the RCC (decremented
-			 * once for each receive character) minus 2 or 4 for the 16-bit
-			 * or 32-bit CRC.
-			 *
-			 * If the status field is zero, this is an intermediate buffer.
-			 * It's size is 4K.
-			 *
-			 * If the DMA Buffer Entry's Status field is non-zero, the
-			 * receive operation completed normally (ie: DCD dropped). The
-			 * RCC field is valid and holds the received frame size.
-			 * It is possible that the RCC field will be zero on a DMA buffer
-			 * entry with a non-zero status. This can occur if the total
-			 * frame size (number of bytes between the time DCD goes active
-			 * to the time DCD goes inactive) exceeds 65535 bytes. In this
-			 * case the 16C32 has underrun on the RCC count and appears to
-			 * stop updating this counter to let us know the actual received
-			 * frame size. If this happens (non-zero status and zero RCC),
-			 * simply return the entire RxDMA Buffer
-			 */
-			if ( status ) {
-				/*
-				 * In the event that the final RxDMA Buffer is
-				 * terminated with a non-zero status and the RCC
-				 * field is zero, we interpret this as the RCC
-				 * having underflowed (received frame > 65535 bytes).
-				 *
-				 * Signal the event to the user by passing back
-				 * a status of RxStatus_CrcError returning the full
-				 * buffer and let the app figure out what data is
-				 * actually valid
-				 */
-				if ( info->rx_buffer_list[CurrentIndex].rcc )
-					framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
-				else
-					framesize = DMABUFFERSIZE;
-			}
-			else
-				framesize = DMABUFFERSIZE;
-		}
-
-		if ( framesize > DMABUFFERSIZE ) {
-			/*
-			 * if running in raw sync mode, ISR handler for
-			 * End Of Buffer events terminates all buffers at 4K.
-			 * If this frame size is said to be >4K, get the
-			 * actual number of bytes of the frame in this buffer.
-			 */
-			framesize = framesize % DMABUFFERSIZE;
-		}
-
-
-		if ( debug_level >= DEBUG_LEVEL_BH )
-			printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
-				__FILE__,__LINE__,info->device_name,status,framesize);
-
-		if ( debug_level >= DEBUG_LEVEL_DATA )
-			mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
-				min_t(int, framesize, DMABUFFERSIZE),0);
-
-		if (framesize) {
-			/* copy dma buffer(s) to contiguous intermediate buffer */
-			/* NOTE: we never copy more than DMABUFFERSIZE bytes	*/
-
-			pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
-			memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
-			info->icount.rxok++;
-
-			ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
-		}
-
-		/* Free the buffers used by this frame. */
-		mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
-
-		ReturnCode = true;
-	}
-
-
-	if ( info->rx_enabled && info->rx_overflow ) {
-		/* The receiver needs to restarted because of
-		 * a receive overflow (buffer or FIFO). If the
-		 * receive buffers are now empty, then restart receiver.
-		 */
-
-		if ( !info->rx_buffer_list[CurrentIndex].status &&
-			info->rx_buffer_list[CurrentIndex].count ) {
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			usc_start_receiver(info);
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-		}
-	}
-
-	return ReturnCode;
-
-}	/* end of mgsl_get_raw_rx_frame() */
-
-/* mgsl_load_tx_dma_buffer()
- * 
- * 	Load the transmit DMA buffer with the specified data.
- * 
- * Arguments:
- * 
- * 	info		pointer to device extension
- * 	Buffer		pointer to buffer containing frame to load
- * 	BufferSize	size in bytes of frame in Buffer
- * 
- * Return Value: 	None
- */
-static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
-		const char *Buffer, unsigned int BufferSize)
-{
-	unsigned short Copycount;
-	unsigned int i = 0;
-	DMABUFFERENTRY *pBufEntry;
-	
-	if ( debug_level >= DEBUG_LEVEL_DATA )
-		mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
-
-	if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
-		/* set CMR:13 to start transmit when
-		 * next GoAhead (abort) is received
-		 */
-	 	info->cmr_value |= BIT13;
-	}
-		
-	/* begin loading the frame in the next available tx dma
-	 * buffer, remember it's starting location for setting
-	 * up tx dma operation
-	 */
-	i = info->current_tx_buffer;
-	info->start_tx_dma_buffer = i;
-
-	/* Setup the status and RCC (Frame Size) fields of the 1st */
-	/* buffer entry in the transmit DMA buffer list. */
-
-	info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
-	info->tx_buffer_list[i].rcc    = BufferSize;
-	info->tx_buffer_list[i].count  = BufferSize;
-
-	/* Copy frame data from 1st source buffer to the DMA buffers. */
-	/* The frame data may span multiple DMA buffers. */
-
-	while( BufferSize ){
-		/* Get a pointer to next DMA buffer entry. */
-		pBufEntry = &info->tx_buffer_list[i++];
-			
-		if ( i == info->tx_buffer_count )
-			i=0;
-
-		/* Calculate the number of bytes that can be copied from */
-		/* the source buffer to this DMA buffer. */
-		if ( BufferSize > DMABUFFERSIZE )
-			Copycount = DMABUFFERSIZE;
-		else
-			Copycount = BufferSize;
-
-		/* Actually copy data from source buffer to DMA buffer. */
-		/* Also set the data count for this individual DMA buffer. */
-		mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
-
-		pBufEntry->count = Copycount;
-
-		/* Advance source pointer and reduce remaining data count. */
-		Buffer += Copycount;
-		BufferSize -= Copycount;
-
-		++info->tx_dma_buffers_used;
-	}
-
-	/* remember next available tx dma buffer */
-	info->current_tx_buffer = i;
-
-}	/* end of mgsl_load_tx_dma_buffer() */
-
-/*
- * mgsl_register_test()
- * 
- * 	Performs a register test of the 16C32.
- * 	
- * Arguments:		info	pointer to device instance data
- * Return Value:		true if test passed, otherwise false
- */
-static bool mgsl_register_test( struct mgsl_struct *info )
-{
-	static unsigned short BitPatterns[] =
-		{ 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
-	static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
-	unsigned int i;
-	bool rc = true;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	usc_reset(info);
-
-	/* Verify the reset state of some registers. */
-
-	if ( (usc_InReg( info, SICR ) != 0) ||
-		  (usc_InReg( info, IVR  ) != 0) ||
-		  (usc_InDmaReg( info, DIVR ) != 0) ){
-		rc = false;
-	}
-
-	if ( rc ){
-		/* Write bit patterns to various registers but do it out of */
-		/* sync, then read back and verify values. */
-
-		for ( i = 0 ; i < Patterncount ; i++ ) {
-			usc_OutReg( info, TC0R, BitPatterns[i] );
-			usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
-			usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
-			usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
-			usc_OutReg( info, RSR,  BitPatterns[(i+4)%Patterncount] );
-			usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
-
-			if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
-				  (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
-				  (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
-				  (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
-				  (usc_InReg( info, RSR )  != BitPatterns[(i+4)%Patterncount]) ||
-				  (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
-				rc = false;
-				break;
-			}
-		}
-	}
-
-	usc_reset(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	return rc;
-
-}	/* end of mgsl_register_test() */
-
-/* mgsl_irq_test() 	Perform interrupt test of the 16C32.
- * 
- * Arguments:		info	pointer to device instance data
- * Return Value:	true if test passed, otherwise false
- */
-static bool mgsl_irq_test( struct mgsl_struct *info )
-{
-	unsigned long EndTime;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	usc_reset(info);
-
-	/*
-	 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition. 
-	 * The ISR sets irq_occurred to true.
-	 */
-
-	info->irq_occurred = false;
-
-	/* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
-	/* Enable INTEN (Port 6, Bit12) */
-	/* This connects the IRQ request signal to the ISA bus */
-	/* on the ISA adapter. This has no effect for the PCI adapter */
-	usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
-
-	usc_EnableMasterIrqBit(info);
-	usc_EnableInterrupts(info, IO_PIN);
-	usc_ClearIrqPendingBits(info, IO_PIN);
-	
-	usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
-	usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
-
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	EndTime=100;
-	while( EndTime-- && !info->irq_occurred ) {
-		msleep_interruptible(10);
-	}
-	
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	usc_reset(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-	return info->irq_occurred;
-
-}	/* end of mgsl_irq_test() */
-
-/* mgsl_dma_test()
- * 
- * 	Perform a DMA test of the 16C32. A small frame is
- * 	transmitted via DMA from a transmit buffer to a receive buffer
- * 	using single buffer DMA mode.
- * 	
- * Arguments:		info	pointer to device instance data
- * Return Value:	true if test passed, otherwise false
- */
-static bool mgsl_dma_test( struct mgsl_struct *info )
-{
-	unsigned short FifoLevel;
-	unsigned long phys_addr;
-	unsigned int FrameSize;
-	unsigned int i;
-	char *TmpPtr;
-	bool rc = true;
-	unsigned short status=0;
-	unsigned long EndTime;
-	unsigned long flags;
-	MGSL_PARAMS tmp_params;
-
-	/* save current port options */
-	memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
-	/* load default port options */
-	memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
-	
-#define TESTFRAMESIZE 40
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	
-	/* setup 16C32 for SDLC DMA transfer mode */
-
-	usc_reset(info);
-	usc_set_sdlc_mode(info);
-	usc_enable_loopback(info,1);
-	
-	/* Reprogram the RDMR so that the 16C32 does NOT clear the count
-	 * field of the buffer entry after fetching buffer address. This
-	 * way we can detect a DMA failure for a DMA read (which should be
-	 * non-destructive to system memory) before we try and write to
-	 * memory (where a failure could corrupt system memory).
-	 */
-
-	/* Receive DMA mode Register (RDMR)
-	 * 
-	 * <15..14>	11	DMA mode = Linked List Buffer mode
-	 * <13>		1	RSBinA/L = store Rx status Block in List entry
-	 * <12>		0	1 = Clear count of List Entry after fetching
-	 * <11..10>	00	Address mode = Increment
-	 * <9>		1	Terminate Buffer on RxBound
-	 * <8>		0	Bus Width = 16bits
-	 * <7..0>		?	status Bits (write as 0s)
-	 * 
-	 * 1110 0010 0000 0000 = 0xe200
-	 */
-
-	usc_OutDmaReg( info, RDMR, 0xe200 );
-	
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-
-	/* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
-
-	FrameSize = TESTFRAMESIZE;
-
-	/* setup 1st transmit buffer entry: */
-	/* with frame size and transmit control word */
-
-	info->tx_buffer_list[0].count  = FrameSize;
-	info->tx_buffer_list[0].rcc    = FrameSize;
-	info->tx_buffer_list[0].status = 0x4000;
-
-	/* build a transmit frame in 1st transmit DMA buffer */
-
-	TmpPtr = info->tx_buffer_list[0].virt_addr;
-	for (i = 0; i < FrameSize; i++ )
-		*TmpPtr++ = i;
-
-	/* setup 1st receive buffer entry: */
-	/* clear status, set max receive buffer size */
-
-	info->rx_buffer_list[0].status = 0;
-	info->rx_buffer_list[0].count = FrameSize + 4;
-
-	/* zero out the 1st receive buffer */
-
-	memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
-
-	/* Set count field of next buffer entries to prevent */
-	/* 16C32 from using buffers after the 1st one. */
-
-	info->tx_buffer_list[1].count = 0;
-	info->rx_buffer_list[1].count = 0;
-	
-
-	/***************************/
-	/* Program 16C32 receiver. */
-	/***************************/
-	
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-
-	/* setup DMA transfers */
-	usc_RTCmd( info, RTCmd_PurgeRxFifo );
-
-	/* program 16C32 receiver with physical address of 1st DMA buffer entry */
-	phys_addr = info->rx_buffer_list[0].phys_entry;
-	usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
-	usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
-
-	/* Clear the Rx DMA status bits (read RDMR) and start channel */
-	usc_InDmaReg( info, RDMR );
-	usc_DmaCmd( info, DmaCmd_InitRxChannel );
-
-	/* Enable Receiver (RMR <1..0> = 10) */
-	usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
-	
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-
-	/*************************************************************/
-	/* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
-	/*************************************************************/
-
-	/* Wait 100ms for interrupt. */
-	EndTime = jiffies + msecs_to_jiffies(100);
-
-	for(;;) {
-		if (time_after(jiffies, EndTime)) {
-			rc = false;
-			break;
-		}
-
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		status = usc_InDmaReg( info, RDMR );
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-		if ( !(status & BIT4) && (status & BIT5) ) {
-			/* INITG (BIT 4) is inactive (no entry read in progress) AND */
-			/* BUSY  (BIT 5) is active (channel still active). */
-			/* This means the buffer entry read has completed. */
-			break;
-		}
-	}
-
-
-	/******************************/
-	/* Program 16C32 transmitter. */
-	/******************************/
-	
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-
-	/* Program the Transmit Character Length Register (TCLR) */
-	/* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
-
-	usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
-	usc_RTCmd( info, RTCmd_PurgeTxFifo );
-
-	/* Program the address of the 1st DMA Buffer Entry in linked list */
-
-	phys_addr = info->tx_buffer_list[0].phys_entry;
-	usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
-	usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
-
-	/* unlatch Tx status bits, and start transmit channel. */
-
-	usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
-	usc_DmaCmd( info, DmaCmd_InitTxChannel );
-
-	/* wait for DMA controller to fill transmit FIFO */
-
-	usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
-	
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-
-	/**********************************/
-	/* WAIT FOR TRANSMIT FIFO TO FILL */
-	/**********************************/
-	
-	/* Wait 100ms */
-	EndTime = jiffies + msecs_to_jiffies(100);
-
-	for(;;) {
-		if (time_after(jiffies, EndTime)) {
-			rc = false;
-			break;
-		}
-
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		FifoLevel = usc_InReg(info, TICR) >> 8;
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-			
-		if ( FifoLevel < 16 )
-			break;
-		else
-			if ( FrameSize < 32 ) {
-				/* This frame is smaller than the entire transmit FIFO */
-				/* so wait for the entire frame to be loaded. */
-				if ( FifoLevel <= (32 - FrameSize) )
-					break;
-			}
-	}
-
-
-	if ( rc )
-	{
-		/* Enable 16C32 transmitter. */
-
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		
-		/* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
-		usc_TCmd( info, TCmd_SendFrame );
-		usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
-		
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-
-		/******************************/
-		/* WAIT FOR TRANSMIT COMPLETE */
-		/******************************/
-
-		/* Wait 100ms */
-		EndTime = jiffies + msecs_to_jiffies(100);
-
-		/* While timer not expired wait for transmit complete */
-
-		spin_lock_irqsave(&info->irq_spinlock,flags);
-		status = usc_InReg( info, TCSR );
-		spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-		while ( !(status & (BIT6 | BIT5 | BIT4 | BIT2 | BIT1)) ) {
-			if (time_after(jiffies, EndTime)) {
-				rc = false;
-				break;
-			}
-
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			status = usc_InReg( info, TCSR );
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-		}
-	}
-
-
-	if ( rc ){
-		/* CHECK FOR TRANSMIT ERRORS */
-		if ( status & (BIT5 | BIT1) )
-			rc = false;
-	}
-
-	if ( rc ) {
-		/* WAIT FOR RECEIVE COMPLETE */
-
-		/* Wait 100ms */
-		EndTime = jiffies + msecs_to_jiffies(100);
-
-		/* Wait for 16C32 to write receive status to buffer entry. */
-		status=info->rx_buffer_list[0].status;
-		while ( status == 0 ) {
-			if (time_after(jiffies, EndTime)) {
-				rc = false;
-				break;
-			}
-			status=info->rx_buffer_list[0].status;
-		}
-	}
-
-
-	if ( rc ) {
-		/* CHECK FOR RECEIVE ERRORS */
-		status = info->rx_buffer_list[0].status;
-
-		if ( status & (BIT8 | BIT3 | BIT1) ) {
-			/* receive error has occurred */
-			rc = false;
-		} else {
-			if ( memcmp( info->tx_buffer_list[0].virt_addr ,
-				info->rx_buffer_list[0].virt_addr, FrameSize ) ){
-				rc = false;
-			}
-		}
-	}
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	usc_reset( info );
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	/* restore current port options */
-	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
-	
-	return rc;
-
-}	/* end of mgsl_dma_test() */
-
-/* mgsl_adapter_test()
- * 
- * 	Perform the register, IRQ, and DMA tests for the 16C32.
- * 	
- * Arguments:		info	pointer to device instance data
- * Return Value:	0 if success, otherwise -ENODEV
- */
-static int mgsl_adapter_test( struct mgsl_struct *info )
-{
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):Testing device %s\n",
-			__FILE__,__LINE__,info->device_name );
-			
-	if ( !mgsl_register_test( info ) ) {
-		info->init_error = DiagStatus_AddressFailure;
-		printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
-			__FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
-		return -ENODEV;
-	}
-
-	if ( !mgsl_irq_test( info ) ) {
-		info->init_error = DiagStatus_IrqFailure;
-		printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
-			__FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
-		return -ENODEV;
-	}
-
-	if ( !mgsl_dma_test( info ) ) {
-		info->init_error = DiagStatus_DmaFailure;
-		printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
-			__FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
-		return -ENODEV;
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):device %s passed diagnostics\n",
-			__FILE__,__LINE__,info->device_name );
-			
-	return 0;
-
-}	/* end of mgsl_adapter_test() */
-
-/* mgsl_memory_test()
- * 
- * 	Test the shared memory on a PCI adapter.
- * 
- * Arguments:		info	pointer to device instance data
- * Return Value:	true if test passed, otherwise false
- */
-static bool mgsl_memory_test( struct mgsl_struct *info )
-{
-	static unsigned long BitPatterns[] =
-		{ 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
-	unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
-	unsigned long i;
-	unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
-	unsigned long * TestAddr;
-
-	TestAddr = (unsigned long *)info->memory_base;
-
-	/* Test data lines with test pattern at one location. */
-
-	for ( i = 0 ; i < Patterncount ; i++ ) {
-		*TestAddr = BitPatterns[i];
-		if ( *TestAddr != BitPatterns[i] )
-			return false;
-	}
-
-	/* Test address lines with incrementing pattern over */
-	/* entire address range. */
-
-	for ( i = 0 ; i < TestLimit ; i++ ) {
-		*TestAddr = i * 4;
-		TestAddr++;
-	}
-
-	TestAddr = (unsigned long *)info->memory_base;
-
-	for ( i = 0 ; i < TestLimit ; i++ ) {
-		if ( *TestAddr != i * 4 )
-			return false;
-		TestAddr++;
-	}
-
-	memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
-
-	return true;
-
-}	/* End Of mgsl_memory_test() */
-
-
-/* mgsl_load_pci_memory()
- * 
- * 	Load a large block of data into the PCI shared memory.
- * 	Use this instead of memcpy() or memmove() to move data
- * 	into the PCI shared memory.
- * 
- * Notes:
- * 
- * 	This function prevents the PCI9050 interface chip from hogging
- * 	the adapter local bus, which can starve the 16C32 by preventing
- * 	16C32 bus master cycles.
- * 
- * 	The PCI9050 documentation says that the 9050 will always release
- * 	control of the local bus after completing the current read
- * 	or write operation.
- * 
- * 	It appears that as long as the PCI9050 write FIFO is full, the
- * 	PCI9050 treats all of the writes as a single burst transaction
- * 	and will not release the bus. This causes DMA latency problems
- * 	at high speeds when copying large data blocks to the shared
- * 	memory.
- * 
- * 	This function in effect, breaks the a large shared memory write
- * 	into multiple transations by interleaving a shared memory read
- * 	which will flush the write FIFO and 'complete' the write
- * 	transation. This allows any pending DMA request to gain control
- * 	of the local bus in a timely fasion.
- * 
- * Arguments:
- * 
- * 	TargetPtr	pointer to target address in PCI shared memory
- * 	SourcePtr	pointer to source buffer for data
- * 	count		count in bytes of data to copy
- *
- * Return Value:	None
- */
-static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
-	unsigned short count )
-{
-	/* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
-#define PCI_LOAD_INTERVAL 64
-
-	unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
-	unsigned short Index;
-	unsigned long Dummy;
-
-	for ( Index = 0 ; Index < Intervalcount ; Index++ )
-	{
-		memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
-		Dummy = *((volatile unsigned long *)TargetPtr);
-		TargetPtr += PCI_LOAD_INTERVAL;
-		SourcePtr += PCI_LOAD_INTERVAL;
-	}
-
-	memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
-
-}	/* End Of mgsl_load_pci_memory() */
-
-static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
-{
-	int i;
-	int linecount;
-	if (xmit)
-		printk("%s tx data:\n",info->device_name);
-	else
-		printk("%s rx data:\n",info->device_name);
-		
-	while(count) {
-		if (count > 16)
-			linecount = 16;
-		else
-			linecount = count;
-			
-		for(i=0;i<linecount;i++)
-			printk("%02X ",(unsigned char)data[i]);
-		for(;i<17;i++)
-			printk("   ");
-		for(i=0;i<linecount;i++) {
-			if (data[i]>=040 && data[i]<=0176)
-				printk("%c",data[i]);
-			else
-				printk(".");
-		}
-		printk("\n");
-		
-		data  += linecount;
-		count -= linecount;
-	}
-}	/* end of mgsl_trace_block() */
-
-/* mgsl_tx_timeout()
- * 
- * 	called when HDLC frame times out
- * 	update stats and do tx completion processing
- * 	
- * Arguments:	context		pointer to device instance data
- * Return Value:	None
- */
-static void mgsl_tx_timeout(struct timer_list *t)
-{
-	struct mgsl_struct *info = from_timer(info, t, tx_timer);
-	unsigned long flags;
-	
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):mgsl_tx_timeout(%s)\n",
-			__FILE__,__LINE__,info->device_name);
-	if(info->tx_active &&
-	   (info->params.mode == MGSL_MODE_HDLC ||
-	    info->params.mode == MGSL_MODE_RAW) ) {
-		info->icount.txtimeout++;
-	}
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	info->tx_active = false;
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-	if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
-		usc_loopmode_cancel_transmit( info );
-
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-	
-#if SYNCLINK_GENERIC_HDLC
-	if (info->netcount)
-		hdlcdev_tx_done(info);
-	else
-#endif
-		mgsl_bh_transmit(info);
-	
-}	/* end of mgsl_tx_timeout() */
-
-/* signal that there are no more frames to send, so that
- * line is 'released' by echoing RxD to TxD when current
- * transmission is complete (or immediately if no tx in progress).
- */
-static int mgsl_loopmode_send_done( struct mgsl_struct * info )
-{
-	unsigned long flags;
-	
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
-		if (info->tx_active)
-			info->loopmode_send_done_requested = true;
-		else
-			usc_loopmode_send_done(info);
-	}
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	return 0;
-}
-
-/* release the line by echoing RxD to TxD
- * upon completion of a transmit frame
- */
-static void usc_loopmode_send_done( struct mgsl_struct * info )
-{
- 	info->loopmode_send_done_requested = false;
- 	/* clear CMR:13 to 0 to start echoing RxData to TxData */
- 	info->cmr_value &= ~BIT13;
- 	usc_OutReg(info, CMR, info->cmr_value);
-}
-
-/* abort a transmit in progress while in HDLC LoopMode
- */
-static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
-{
- 	/* reset tx dma channel and purge TxFifo */
- 	usc_RTCmd( info, RTCmd_PurgeTxFifo );
- 	usc_DmaCmd( info, DmaCmd_ResetTxChannel );
-  	usc_loopmode_send_done( info );
-}
-
-/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
- * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
- * we must clear CMR:13 to begin repeating TxData to RxData
- */
-static void usc_loopmode_insert_request( struct mgsl_struct * info )
-{
- 	info->loopmode_insert_requested = true;
- 
- 	/* enable RxAbort irq. On next RxAbort, clear CMR:13 to
- 	 * begin repeating TxData on RxData (complete insertion)
-	 */
- 	usc_OutReg( info, RICR, 
-		(usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
-		
-	/* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
-	info->cmr_value |= BIT13;
- 	usc_OutReg(info, CMR, info->cmr_value);
-}
-
-/* return 1 if station is inserted into the loop, otherwise 0
- */
-static int usc_loopmode_active( struct mgsl_struct * info)
-{
- 	return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
-}
-
-#if SYNCLINK_GENERIC_HDLC
-
-/**
- * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
- * @dev:      pointer to network device structure
- * @encoding: serial encoding setting
- * @parity:   FCS setting
- *
- * Set encoding and frame check sequence (FCS) options.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
-			  unsigned short parity)
-{
-	struct mgsl_struct *info = dev_to_port(dev);
-	unsigned char  new_encoding;
-	unsigned short new_crctype;
-
-	/* return error if TTY interface open */
-	if (info->port.count)
-		return -EBUSY;
-
-	switch (encoding)
-	{
-	case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
-	case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
-	case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
-	case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
-	case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
-	default: return -EINVAL;
-	}
-
-	switch (parity)
-	{
-	case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
-	case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
-	case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
-	default: return -EINVAL;
-	}
-
-	info->params.encoding = new_encoding;
-	info->params.crc_type = new_crctype;
-
-	/* if network interface up, reprogram hardware */
-	if (info->netcount)
-		mgsl_program_hw(info);
-
-	return 0;
-}
-
-/**
- * hdlcdev_xmit - called by generic HDLC layer to send a frame
- * @skb: socket buffer containing HDLC frame
- * @dev: pointer to network device structure
- */
-static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
-				      struct net_device *dev)
-{
-	struct mgsl_struct *info = dev_to_port(dev);
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
-
-	/* stop sending until this frame completes */
-	netif_stop_queue(dev);
-
-	/* copy data to device buffers */
-	info->xmit_cnt = skb->len;
-	mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
-
-	/* update network statistics */
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += skb->len;
-
-	/* done with socket buffer, so free it */
-	dev_kfree_skb(skb);
-
-	/* save start time for transmit timeout detection */
-	netif_trans_update(dev);
-
-	/* start hardware transmitter if necessary */
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	if (!info->tx_active)
-	 	usc_start_transmitter(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	return NETDEV_TX_OK;
-}
-
-/**
- * hdlcdev_open - called by network layer when interface enabled
- * @dev: pointer to network device structure
- *
- * Claim resources and initialize hardware.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_open(struct net_device *dev)
-{
-	struct mgsl_struct *info = dev_to_port(dev);
-	int rc;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
-
-	/* generic HDLC layer open processing */
-	rc = hdlc_open(dev);
-	if (rc)
-		return rc;
-
-	/* arbitrate between network and tty opens */
-	spin_lock_irqsave(&info->netlock, flags);
-	if (info->port.count != 0 || info->netcount != 0) {
-		printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
-		spin_unlock_irqrestore(&info->netlock, flags);
-		return -EBUSY;
-	}
-	info->netcount=1;
-	spin_unlock_irqrestore(&info->netlock, flags);
-
-	/* claim resources and init adapter */
-	if ((rc = startup(info)) != 0) {
-		spin_lock_irqsave(&info->netlock, flags);
-		info->netcount=0;
-		spin_unlock_irqrestore(&info->netlock, flags);
-		return rc;
-	}
-
-	/* assert RTS and DTR, apply hardware settings */
-	info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
-	mgsl_program_hw(info);
-
-	/* enable network layer transmit */
-	netif_trans_update(dev);
-	netif_start_queue(dev);
-
-	/* inform generic HDLC layer of current DCD status */
-	spin_lock_irqsave(&info->irq_spinlock, flags);
-	usc_get_serial_signals(info);
-	spin_unlock_irqrestore(&info->irq_spinlock, flags);
-	if (info->serial_signals & SerialSignal_DCD)
-		netif_carrier_on(dev);
-	else
-		netif_carrier_off(dev);
-	return 0;
-}
-
-/**
- * hdlcdev_close - called by network layer when interface is disabled
- * @dev: pointer to network device structure
- *
- * Shutdown hardware and release resources.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_close(struct net_device *dev)
-{
-	struct mgsl_struct *info = dev_to_port(dev);
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
-
-	netif_stop_queue(dev);
-
-	/* shutdown adapter and release resources */
-	shutdown(info);
-
-	hdlc_close(dev);
-
-	spin_lock_irqsave(&info->netlock, flags);
-	info->netcount=0;
-	spin_unlock_irqrestore(&info->netlock, flags);
-
-	return 0;
-}
-
-/**
- * hdlcdev_ioctl - called by network layer to process IOCTL call to network device
- * @dev: pointer to network device structure
- * @ifr: pointer to network interface request structure
- * @cmd: IOCTL command code
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	const size_t size = sizeof(sync_serial_settings);
-	sync_serial_settings new_line;
-	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
-	struct mgsl_struct *info = dev_to_port(dev);
-	unsigned int flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
-
-	/* return error if TTY interface open */
-	if (info->port.count)
-		return -EBUSY;
-
-	if (cmd != SIOCWANDEV)
-		return hdlc_ioctl(dev, ifr, cmd);
-
-	switch(ifr->ifr_settings.type) {
-	case IF_GET_IFACE: /* return current sync_serial_settings */
-
-		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
-		if (ifr->ifr_settings.size < size) {
-			ifr->ifr_settings.size = size; /* data size wanted */
-			return -ENOBUFS;
-		}
-
-		flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
-					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
-					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
-					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
-
-		memset(&new_line, 0, sizeof(new_line));
-		switch (flags){
-		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
-		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
-		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
-		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
-		default: new_line.clock_type = CLOCK_DEFAULT;
-		}
-
-		new_line.clock_rate = info->params.clock_speed;
-		new_line.loopback   = info->params.loopback ? 1:0;
-
-		if (copy_to_user(line, &new_line, size))
-			return -EFAULT;
-		return 0;
-
-	case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
-
-		if(!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		if (copy_from_user(&new_line, line, size))
-			return -EFAULT;
-
-		switch (new_line.clock_type)
-		{
-		case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
-		case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
-		case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
-		case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
-		case CLOCK_DEFAULT:  flags = info->params.flags &
-					     (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
-					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
-					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
-					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
-		default: return -EINVAL;
-		}
-
-		if (new_line.loopback != 0 && new_line.loopback != 1)
-			return -EINVAL;
-
-		info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
-					HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
-					HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
-					HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
-		info->params.flags |= flags;
-
-		info->params.loopback = new_line.loopback;
-
-		if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
-			info->params.clock_speed = new_line.clock_rate;
-		else
-			info->params.clock_speed = 0;
-
-		/* if network interface up, reprogram hardware */
-		if (info->netcount)
-			mgsl_program_hw(info);
-		return 0;
-
-	default:
-		return hdlc_ioctl(dev, ifr, cmd);
-	}
-}
-
-/**
- * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected
- *
- * @dev: pointer to network device structure
- */
-static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
-	struct mgsl_struct *info = dev_to_port(dev);
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("hdlcdev_tx_timeout(%s)\n",dev->name);
-
-	dev->stats.tx_errors++;
-	dev->stats.tx_aborted_errors++;
-
-	spin_lock_irqsave(&info->irq_spinlock,flags);
-	usc_stop_transmitter(info);
-	spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
-	netif_wake_queue(dev);
-}
-
-/**
- * hdlcdev_tx_done - called by device driver when transmit completes
- * @info: pointer to device instance information
- *
- * Reenable network layer transmit if stopped.
- */
-static void hdlcdev_tx_done(struct mgsl_struct *info)
-{
-	if (netif_queue_stopped(info->netdev))
-		netif_wake_queue(info->netdev);
-}
-
-/**
- * hdlcdev_rx - called by device driver when frame received
- * @info: pointer to device instance information
- * @buf:  pointer to buffer contianing frame data
- * @size: count of data bytes in buf
- *
- * Pass frame to network layer.
- */
-static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
-{
-	struct sk_buff *skb = dev_alloc_skb(size);
-	struct net_device *dev = info->netdev;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("hdlcdev_rx(%s)\n", dev->name);
-
-	if (skb == NULL) {
-		printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
-		       dev->name);
-		dev->stats.rx_dropped++;
-		return;
-	}
-
-	skb_put_data(skb, buf, size);
-
-	skb->protocol = hdlc_type_trans(skb, dev);
-
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += size;
-
-	netif_rx(skb);
-}
-
-static const struct net_device_ops hdlcdev_ops = {
-	.ndo_open       = hdlcdev_open,
-	.ndo_stop       = hdlcdev_close,
-	.ndo_start_xmit = hdlc_start_xmit,
-	.ndo_do_ioctl   = hdlcdev_ioctl,
-	.ndo_tx_timeout = hdlcdev_tx_timeout,
-};
-
-/**
- * hdlcdev_init - called by device driver when adding device instance
- * @info: pointer to device instance information
- *
- * Do generic HDLC initialization.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_init(struct mgsl_struct *info)
-{
-	int rc;
-	struct net_device *dev;
-	hdlc_device *hdlc;
-
-	/* allocate and initialize network and HDLC layer objects */
-
-	dev = alloc_hdlcdev(info);
-	if (!dev) {
-		printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
-		return -ENOMEM;
-	}
-
-	/* for network layer reporting purposes only */
-	dev->base_addr = info->io_base;
-	dev->irq       = info->irq_level;
-	dev->dma       = info->dma_level;
-
-	/* network layer callbacks and settings */
-	dev->netdev_ops     = &hdlcdev_ops;
-	dev->watchdog_timeo = 10 * HZ;
-	dev->tx_queue_len   = 50;
-
-	/* generic HDLC layer callbacks and settings */
-	hdlc         = dev_to_hdlc(dev);
-	hdlc->attach = hdlcdev_attach;
-	hdlc->xmit   = hdlcdev_xmit;
-
-	/* register objects with HDLC layer */
-	rc = register_hdlc_device(dev);
-	if (rc) {
-		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
-		free_netdev(dev);
-		return rc;
-	}
-
-	info->netdev = dev;
-	return 0;
-}
-
-/**
- * hdlcdev_exit - called by device driver when removing device instance
- * @info: pointer to device instance information
- *
- * Do generic HDLC cleanup.
- */
-static void hdlcdev_exit(struct mgsl_struct *info)
-{
-	unregister_hdlc_device(info->netdev);
-	free_netdev(info->netdev);
-	info->netdev = NULL;
-}
-
-#endif /* CONFIG_HDLC */
-
-
-static int synclink_init_one (struct pci_dev *dev,
-					const struct pci_device_id *ent)
-{
-	struct mgsl_struct *info;
-
-	if (pci_enable_device(dev)) {
-		printk("error enabling pci device %p\n", dev);
-		return -EIO;
-	}
-
-	info = mgsl_allocate_device();
-	if (!info) {
-		printk("can't allocate device instance data.\n");
-		return -EIO;
-	}
-
-        /* Copy user configuration info to device instance data */
-		
-	info->io_base = pci_resource_start(dev, 2);
-	info->irq_level = dev->irq;
-	info->phys_memory_base = pci_resource_start(dev, 3);
-				
-        /* Because veremap only works on page boundaries we must map
-	 * a larger area than is actually implemented for the LCR
-	 * memory range. We map a full page starting at the page boundary.
-	 */
-	info->phys_lcr_base = pci_resource_start(dev, 0);
-	info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
-	info->phys_lcr_base &= ~(PAGE_SIZE-1);
-				
-	info->io_addr_size = 8;
-	info->irq_flags = IRQF_SHARED;
-
-	if (dev->device == 0x0210) {
-		/* Version 1 PCI9030 based universal PCI adapter */
-		info->misc_ctrl_value = 0x007c4080;
-		info->hw_version = 1;
-	} else {
-		/* Version 0 PCI9050 based 5V PCI adapter
-		 * A PCI9050 bug prevents reading LCR registers if 
-		 * LCR base address bit 7 is set. Maintain shadow
-		 * value so we can write to LCR misc control reg.
-		 */
-		info->misc_ctrl_value = 0x087e4546;
-		info->hw_version = 0;
-	}
-				
-	mgsl_add_device(info);
-
-	return 0;
-}
-
-static void synclink_remove_one (struct pci_dev *dev)
-{
-}
-
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index afa4cc52e48d..c0b384e3ed4d 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -620,7 +620,7 @@ static inline int sanity_check(struct slgt_info *info, char *devname, const char
 	return 0;
 }
 
-/**
+/*
  * line discipline callback wrappers
  *
  * The wrappers maintain line discipline references
@@ -1678,6 +1678,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 /**
  * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected
  * @dev: pointer to network device structure
+ * @txqueue: unused
  */
 static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
 {
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
deleted file mode 100644
index ce08c5ec331c..000000000000
--- a/drivers/tty/synclinkmp.c
+++ /dev/null
@@ -1,5579 +0,0 @@
-// SPDX-License-Identifier: GPL-1.0+
-/*
- * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
- *
- * Device driver for Microgate SyncLink Multiport
- * high speed multiprotocol serial adapter.
- *
- * written by Paul Fulghum for Microgate Corporation
- * paulkf@microgate.com
- *
- * Microgate and SyncLink are trademarks of Microgate Corporation
- *
- * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
-#if defined(__i386__)
-#  define BREAKPOINT() asm("   int $3");
-#else
-#  define BREAKPOINT() { }
-#endif
-
-#define MAX_DEVICES 12
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioctl.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <linux/bitops.h>
-#include <asm/types.h>
-#include <linux/termios.h>
-#include <linux/workqueue.h>
-#include <linux/hdlc.h>
-#include <linux/synclink.h>
-
-#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
-#define SYNCLINK_GENERIC_HDLC 1
-#else
-#define SYNCLINK_GENERIC_HDLC 0
-#endif
-
-#define GET_USER(error,value,addr) error = get_user(value,addr)
-#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
-#define PUT_USER(error,value,addr) error = put_user(value,addr)
-#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
-
-#include <linux/uaccess.h>
-
-static MGSL_PARAMS default_params = {
-	MGSL_MODE_HDLC,			/* unsigned long mode */
-	0,				/* unsigned char loopback; */
-	HDLC_FLAG_UNDERRUN_ABORT15,	/* unsigned short flags; */
-	HDLC_ENCODING_NRZI_SPACE,	/* unsigned char encoding; */
-	0,				/* unsigned long clock_speed; */
-	0xff,				/* unsigned char addr_filter; */
-	HDLC_CRC_16_CCITT,		/* unsigned short crc_type; */
-	HDLC_PREAMBLE_LENGTH_8BITS,	/* unsigned char preamble_length; */
-	HDLC_PREAMBLE_PATTERN_NONE,	/* unsigned char preamble; */
-	9600,				/* unsigned long data_rate; */
-	8,				/* unsigned char data_bits; */
-	1,				/* unsigned char stop_bits; */
-	ASYNC_PARITY_NONE		/* unsigned char parity; */
-};
-
-/* size in bytes of DMA data buffers */
-#define SCABUFSIZE 	1024
-#define SCA_MEM_SIZE	0x40000
-#define SCA_BASE_SIZE   512
-#define SCA_REG_SIZE    16
-#define SCA_MAX_PORTS   4
-#define SCAMAXDESC 	128
-
-#define	BUFFERLISTSIZE	4096
-
-/* SCA-I style DMA buffer descriptor */
-typedef struct _SCADESC
-{
-	u16	next;		/* lower l6 bits of next descriptor addr */
-	u16	buf_ptr;	/* lower 16 bits of buffer addr */
-	u8	buf_base;	/* upper 8 bits of buffer addr */
-	u8	pad1;
-	u16	length;		/* length of buffer */
-	u8	status;		/* status of buffer */
-	u8	pad2;
-} SCADESC, *PSCADESC;
-
-typedef struct _SCADESC_EX
-{
-	/* device driver bookkeeping section */
-	char 	*virt_addr;    	/* virtual address of data buffer */
-	u16	phys_entry;	/* lower 16-bits of physical address of this descriptor */
-} SCADESC_EX, *PSCADESC_EX;
-
-/* The queue of BH actions to be performed */
-
-#define BH_RECEIVE  1
-#define BH_TRANSMIT 2
-#define BH_STATUS   4
-
-#define IO_PIN_SHUTDOWN_LIMIT 100
-
-struct	_input_signal_events {
-	int	ri_up;
-	int	ri_down;
-	int	dsr_up;
-	int	dsr_down;
-	int	dcd_up;
-	int	dcd_down;
-	int	cts_up;
-	int	cts_down;
-};
-
-/*
- * Device instance data structure
- */
-typedef struct _synclinkmp_info {
-	void *if_ptr;				/* General purpose pointer (used by SPPP) */
-	int			magic;
-	struct tty_port		port;
-	int			line;
-	unsigned short		close_delay;
-	unsigned short		closing_wait;	/* time to wait before closing */
-
-	struct mgsl_icount	icount;
-
-	int			timeout;
-	int			x_char;		/* xon/xoff character */
-	u16			read_status_mask1;  /* break detection (SR1 indications) */
-	u16			read_status_mask2;  /* parity/framing/overun (SR2 indications) */
-	unsigned char 		ignore_status_mask1;  /* break detection (SR1 indications) */
-	unsigned char		ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
-	unsigned char 		*tx_buf;
-	int			tx_put;
-	int			tx_get;
-	int			tx_count;
-
-	wait_queue_head_t	status_event_wait_q;
-	wait_queue_head_t	event_wait_q;
-	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
-	struct _synclinkmp_info	*next_device;	/* device list link */
-	struct timer_list	status_timer;	/* input signal status check timer */
-
-	spinlock_t lock;		/* spinlock for synchronizing with ISR */
-	struct work_struct task;	 		/* task structure for scheduling bh */
-
-	u32 max_frame_size;			/* as set by device config */
-
-	u32 pending_bh;
-
-	bool bh_running;				/* Protection from multiple */
-	int isr_overflow;
-	bool bh_requested;
-
-	int dcd_chkcount;			/* check counts to prevent */
-	int cts_chkcount;			/* too many IRQs if a signal */
-	int dsr_chkcount;			/* is floating */
-	int ri_chkcount;
-
-	char *buffer_list;			/* virtual address of Rx & Tx buffer lists */
-	unsigned long buffer_list_phys;
-
-	unsigned int rx_buf_count;		/* count of total allocated Rx buffers */
-	SCADESC *rx_buf_list;   		/* list of receive buffer entries */
-	SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
-	unsigned int current_rx_buf;
-
-	unsigned int tx_buf_count;		/* count of total allocated Tx buffers */
-	SCADESC *tx_buf_list;		/* list of transmit buffer entries */
-	SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
-	unsigned int last_tx_buf;
-
-	unsigned char *tmp_rx_buf;
-	unsigned int tmp_rx_buf_count;
-
-	bool rx_enabled;
-	bool rx_overflow;
-
-	bool tx_enabled;
-	bool tx_active;
-	u32 idle_mode;
-
-	unsigned char ie0_value;
-	unsigned char ie1_value;
-	unsigned char ie2_value;
-	unsigned char ctrlreg_value;
-	unsigned char old_signals;
-
-	char device_name[25];			/* device instance name */
-
-	int port_count;
-	int adapter_num;
-	int port_num;
-
-	struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
-
-	unsigned int bus_type;			/* expansion bus type (ISA,EISA,PCI) */
-
-	unsigned int irq_level;			/* interrupt level */
-	unsigned long irq_flags;
-	bool irq_requested;			/* true if IRQ requested */
-
-	MGSL_PARAMS params;			/* communications parameters */
-
-	unsigned char serial_signals;		/* current serial signal states */
-
-	bool irq_occurred;			/* for diagnostics use */
-	unsigned int init_error;		/* Initialization startup error */
-
-	u32 last_mem_alloc;
-	unsigned char* memory_base;		/* shared memory address (PCI only) */
-	u32 phys_memory_base;
-    	int shared_mem_requested;
-
-	unsigned char* sca_base;		/* HD64570 SCA Memory address */
-	u32 phys_sca_base;
-	u32 sca_offset;
-	bool sca_base_requested;
-
-	unsigned char* lcr_base;		/* local config registers (PCI only) */
-	u32 phys_lcr_base;
-	u32 lcr_offset;
-	int lcr_mem_requested;
-
-	unsigned char* statctrl_base;		/* status/control register memory */
-	u32 phys_statctrl_base;
-	u32 statctrl_offset;
-	bool sca_statctrl_requested;
-
-	u32 misc_ctrl_value;
-	char *flag_buf;
-	bool drop_rts_on_tx_done;
-
-	struct	_input_signal_events	input_signal_events;
-
-	/* SPPP/Cisco HDLC device parts */
-	int netcount;
-	spinlock_t netlock;
-
-#if SYNCLINK_GENERIC_HDLC
-	struct net_device *netdev;
-#endif
-
-} SLMP_INFO;
-
-#define MGSL_MAGIC 0x5401
-
-/*
- * define serial signal status change macros
- */
-#define	MISCSTATUS_DCD_LATCHED	(SerialSignal_DCD<<8)	/* indicates change in DCD */
-#define MISCSTATUS_RI_LATCHED	(SerialSignal_RI<<8)	/* indicates change in RI */
-#define MISCSTATUS_CTS_LATCHED	(SerialSignal_CTS<<8)	/* indicates change in CTS */
-#define MISCSTATUS_DSR_LATCHED	(SerialSignal_DSR<<8)	/* change in DSR */
-
-/* Common Register macros */
-#define LPR	0x00
-#define PABR0	0x02
-#define PABR1	0x03
-#define WCRL	0x04
-#define WCRM	0x05
-#define WCRH	0x06
-#define DPCR	0x08
-#define DMER	0x09
-#define ISR0	0x10
-#define ISR1	0x11
-#define ISR2	0x12
-#define IER0	0x14
-#define IER1	0x15
-#define IER2	0x16
-#define ITCR	0x18
-#define INTVR 	0x1a
-#define IMVR	0x1c
-
-/* MSCI Register macros */
-#define TRB	0x20
-#define TRBL	0x20
-#define TRBH	0x21
-#define SR0	0x22
-#define SR1	0x23
-#define SR2	0x24
-#define SR3	0x25
-#define FST	0x26
-#define IE0	0x28
-#define IE1	0x29
-#define IE2	0x2a
-#define FIE	0x2b
-#define CMD	0x2c
-#define MD0	0x2e
-#define MD1	0x2f
-#define MD2	0x30
-#define CTL	0x31
-#define SA0	0x32
-#define SA1	0x33
-#define IDL	0x34
-#define TMC	0x35
-#define RXS	0x36
-#define TXS	0x37
-#define TRC0	0x38
-#define TRC1	0x39
-#define RRC	0x3a
-#define CST0	0x3c
-#define CST1	0x3d
-
-/* Timer Register Macros */
-#define TCNT	0x60
-#define TCNTL	0x60
-#define TCNTH	0x61
-#define TCONR	0x62
-#define TCONRL	0x62
-#define TCONRH	0x63
-#define TMCS	0x64
-#define TEPR	0x65
-
-/* DMA Controller Register macros */
-#define DARL	0x80
-#define DARH	0x81
-#define DARB	0x82
-#define BAR	0x80
-#define BARL	0x80
-#define BARH	0x81
-#define BARB	0x82
-#define SAR	0x84
-#define SARL	0x84
-#define SARH	0x85
-#define SARB	0x86
-#define CPB	0x86
-#define CDA	0x88
-#define CDAL	0x88
-#define CDAH	0x89
-#define EDA	0x8a
-#define EDAL	0x8a
-#define EDAH	0x8b
-#define BFL	0x8c
-#define BFLL	0x8c
-#define BFLH	0x8d
-#define BCR	0x8e
-#define BCRL	0x8e
-#define BCRH	0x8f
-#define DSR	0x90
-#define DMR	0x91
-#define FCT	0x93
-#define DIR	0x94
-#define DCMD	0x95
-
-/* combine with timer or DMA register address */
-#define TIMER0	0x00
-#define TIMER1	0x08
-#define TIMER2	0x10
-#define TIMER3	0x18
-#define RXDMA 	0x00
-#define TXDMA 	0x20
-
-/* SCA Command Codes */
-#define NOOP		0x00
-#define TXRESET		0x01
-#define TXENABLE	0x02
-#define TXDISABLE	0x03
-#define TXCRCINIT	0x04
-#define TXCRCEXCL	0x05
-#define TXEOM		0x06
-#define TXABORT		0x07
-#define MPON		0x08
-#define TXBUFCLR	0x09
-#define RXRESET		0x11
-#define RXENABLE	0x12
-#define RXDISABLE	0x13
-#define RXCRCINIT	0x14
-#define RXREJECT	0x15
-#define SEARCHMP	0x16
-#define RXCRCEXCL	0x17
-#define RXCRCCALC	0x18
-#define CHRESET		0x21
-#define HUNT		0x31
-
-/* DMA command codes */
-#define SWABORT		0x01
-#define FEICLEAR	0x02
-
-/* IE0 */
-#define TXINTE 		BIT7
-#define RXINTE 		BIT6
-#define TXRDYE 		BIT1
-#define RXRDYE 		BIT0
-
-/* IE1 & SR1 */
-#define UDRN   	BIT7
-#define IDLE   	BIT6
-#define SYNCD  	BIT4
-#define FLGD   	BIT4
-#define CCTS   	BIT3
-#define CDCD   	BIT2
-#define BRKD   	BIT1
-#define ABTD   	BIT1
-#define GAPD   	BIT1
-#define BRKE   	BIT0
-#define IDLD	BIT0
-
-/* IE2 & SR2 */
-#define EOM	BIT7
-#define PMP	BIT6
-#define SHRT	BIT6
-#define PE	BIT5
-#define ABT	BIT5
-#define FRME	BIT4
-#define RBIT	BIT4
-#define OVRN	BIT3
-#define CRCE	BIT2
-
-
-/*
- * Global linked list of SyncLink devices
- */
-static SLMP_INFO *synclinkmp_device_list = NULL;
-static int synclinkmp_adapter_count = -1;
-static int synclinkmp_device_count = 0;
-
-/*
- * Set this param to non-zero to load eax with the
- * .text section address and breakpoint on module load.
- * This is useful for use with gdb and add-symbol-file command.
- */
-static bool break_on_load = 0;
-
-/*
- * Driver major number, defaults to zero to get auto
- * assigned major number. May be forced as module parameter.
- */
-static int ttymajor = 0;
-
-/*
- * Array of user specified options for ISA adapters.
- */
-static int debug_level = 0;
-static int maxframe[MAX_DEVICES] = {0,};
-
-module_param(break_on_load, bool, 0);
-module_param(ttymajor, int, 0);
-module_param(debug_level, int, 0);
-module_param_array(maxframe, int, NULL, 0);
-
-static char *driver_name = "SyncLink MultiPort driver";
-static char *driver_version = "$Revision: 4.38 $";
-
-static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
-static void synclinkmp_remove_one(struct pci_dev *dev);
-
-static const struct pci_device_id synclinkmp_pci_tbl[] = {
-	{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0, }, /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
-
-MODULE_LICENSE("GPL");
-
-static struct pci_driver synclinkmp_pci_driver = {
-	.name		= "synclinkmp",
-	.id_table	= synclinkmp_pci_tbl,
-	.probe		= synclinkmp_init_one,
-	.remove		= synclinkmp_remove_one,
-};
-
-
-static struct tty_driver *serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-
-/* tty callbacks */
-
-static int  open(struct tty_struct *tty, struct file * filp);
-static void close(struct tty_struct *tty, struct file * filp);
-static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
-
-static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
-static int put_char(struct tty_struct *tty, unsigned char ch);
-static void send_xchar(struct tty_struct *tty, char ch);
-static void wait_until_sent(struct tty_struct *tty, int timeout);
-static int  write_room(struct tty_struct *tty);
-static void flush_chars(struct tty_struct *tty);
-static void flush_buffer(struct tty_struct *tty);
-static void tx_hold(struct tty_struct *tty);
-static void tx_release(struct tty_struct *tty);
-
-static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
-static int  chars_in_buffer(struct tty_struct *tty);
-static void throttle(struct tty_struct * tty);
-static void unthrottle(struct tty_struct * tty);
-static int set_break(struct tty_struct *tty, int break_state);
-
-#if SYNCLINK_GENERIC_HDLC
-#define dev_to_port(D) (dev_to_hdlc(D)->priv)
-static void hdlcdev_tx_done(SLMP_INFO *info);
-static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
-static int  hdlcdev_init(SLMP_INFO *info);
-static void hdlcdev_exit(SLMP_INFO *info);
-#endif
-
-/* ioctl handlers */
-
-static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
-static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
-static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
-static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
-static int  set_txidle(SLMP_INFO *info, int idle_mode);
-static int  tx_enable(SLMP_INFO *info, int enable);
-static int  tx_abort(SLMP_INFO *info);
-static int  rx_enable(SLMP_INFO *info, int enable);
-static int  modem_input_wait(SLMP_INFO *info,int arg);
-static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
-static int  tiocmget(struct tty_struct *tty);
-static int  tiocmset(struct tty_struct *tty,
-			unsigned int set, unsigned int clear);
-static int  set_break(struct tty_struct *tty, int break_state);
-
-static int  add_device(SLMP_INFO *info);
-static int  device_init(int adapter_num, struct pci_dev *pdev);
-static int  claim_resources(SLMP_INFO *info);
-static void release_resources(SLMP_INFO *info);
-
-static int  startup(SLMP_INFO *info);
-static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
-static int carrier_raised(struct tty_port *port);
-static void shutdown(SLMP_INFO *info);
-static void program_hw(SLMP_INFO *info);
-static void change_params(SLMP_INFO *info);
-
-static bool init_adapter(SLMP_INFO *info);
-static bool register_test(SLMP_INFO *info);
-static bool irq_test(SLMP_INFO *info);
-static bool loopback_test(SLMP_INFO *info);
-static int  adapter_test(SLMP_INFO *info);
-static bool memory_test(SLMP_INFO *info);
-
-static void reset_adapter(SLMP_INFO *info);
-static void reset_port(SLMP_INFO *info);
-static void async_mode(SLMP_INFO *info);
-static void hdlc_mode(SLMP_INFO *info);
-
-static void rx_stop(SLMP_INFO *info);
-static void rx_start(SLMP_INFO *info);
-static void rx_reset_buffers(SLMP_INFO *info);
-static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
-static bool rx_get_frame(SLMP_INFO *info);
-
-static void tx_start(SLMP_INFO *info);
-static void tx_stop(SLMP_INFO *info);
-static void tx_load_fifo(SLMP_INFO *info);
-static void tx_set_idle(SLMP_INFO *info);
-static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
-
-static void get_signals(SLMP_INFO *info);
-static void set_signals(SLMP_INFO *info);
-static void enable_loopback(SLMP_INFO *info, int enable);
-static void set_rate(SLMP_INFO *info, u32 data_rate);
-
-static int  bh_action(SLMP_INFO *info);
-static void bh_handler(struct work_struct *work);
-static void bh_receive(SLMP_INFO *info);
-static void bh_transmit(SLMP_INFO *info);
-static void bh_status(SLMP_INFO *info);
-static void isr_timer(SLMP_INFO *info);
-static void isr_rxint(SLMP_INFO *info);
-static void isr_rxrdy(SLMP_INFO *info);
-static void isr_txint(SLMP_INFO *info);
-static void isr_txrdy(SLMP_INFO *info);
-static void isr_rxdmaok(SLMP_INFO *info);
-static void isr_rxdmaerror(SLMP_INFO *info);
-static void isr_txdmaok(SLMP_INFO *info);
-static void isr_txdmaerror(SLMP_INFO *info);
-static void isr_io_pin(SLMP_INFO *info, u16 status);
-
-static int  alloc_dma_bufs(SLMP_INFO *info);
-static void free_dma_bufs(SLMP_INFO *info);
-static int  alloc_buf_list(SLMP_INFO *info);
-static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
-static int  alloc_tmp_rx_buf(SLMP_INFO *info);
-static void free_tmp_rx_buf(SLMP_INFO *info);
-
-static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
-static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
-static void tx_timeout(struct timer_list *t);
-static void status_timeout(struct timer_list *t);
-
-static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
-static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
-static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
-static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
-static unsigned char read_status_reg(SLMP_INFO * info);
-static void write_control_reg(SLMP_INFO * info);
-
-
-static unsigned char rx_active_fifo_level = 16;	// rx request FIFO activation level in bytes
-static unsigned char tx_active_fifo_level = 16;	// tx request FIFO activation level in bytes
-static unsigned char tx_negate_fifo_level = 32;	// tx request FIFO negation level in bytes
-
-static u32 misc_ctrl_value = 0x007e4040;
-static u32 lcr1_brdr_value = 0x00800028;
-
-static u32 read_ahead_count = 8;
-
-/* DPCR, DMA Priority Control
- *
- * 07..05  Not used, must be 0
- * 04      BRC, bus release condition: 0=all transfers complete
- *              1=release after 1 xfer on all channels
- * 03      CCC, channel change condition: 0=every cycle
- *              1=after each channel completes all xfers
- * 02..00  PR<2..0>, priority 100=round robin
- *
- * 00000100 = 0x00
- */
-static unsigned char dma_priority = 0x04;
-
-// Number of bytes that can be written to shared RAM
-// in a single write operation
-static u32 sca_pci_load_interval = 64;
-
-/*
- * 1st function defined in .text section. Calling this function in
- * init_module() followed by a breakpoint allows a remote debugger
- * (gdb) to get the .text address for the add-symbol-file command.
- * This allows remote debugging of dynamically loadable modules.
- */
-static void* synclinkmp_get_text_ptr(void);
-static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
-
-static inline int sanity_check(SLMP_INFO *info,
-			       char *name, const char *routine)
-{
-#ifdef SANITY_CHECK
-	static const char *badmagic =
-		"Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
-	static const char *badinfo =
-		"Warning: null synclinkmp_struct for (%s) in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != MGSL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#else
-	if (!info)
-		return 1;
-#endif
-	return 0;
-}
-
-/*
- * line discipline callback wrappers
- *
- * The wrappers maintain line discipline references
- * while calling into the line discipline.
- *
- * ldisc_receive_buf  - pass receive data to line discipline
- */
-
-static void ldisc_receive_buf(struct tty_struct *tty,
-			      const __u8 *data, char *flags, int count)
-{
-	struct tty_ldisc *ld;
-	if (!tty)
-		return;
-	ld = tty_ldisc_ref(tty);
-	if (ld) {
-		if (ld->ops->receive_buf)
-			ld->ops->receive_buf(tty, data, flags, count);
-		tty_ldisc_deref(ld);
-	}
-}
-
-/* tty callbacks */
-
-static int install(struct tty_driver *driver, struct tty_struct *tty)
-{
-	SLMP_INFO *info;
-	int line = tty->index;
-
-	if (line >= synclinkmp_device_count) {
-		printk("%s(%d): open with invalid line #%d.\n",
-			__FILE__,__LINE__,line);
-		return -ENODEV;
-	}
-
-	info = synclinkmp_device_list;
-	while (info && info->line != line)
-		info = info->next_device;
-	if (sanity_check(info, tty->name, "open"))
-		return -ENODEV;
-	if (info->init_error) {
-		printk("%s(%d):%s device is not allocated, init error=%d\n",
-			__FILE__, __LINE__, info->device_name,
-			info->init_error);
-		return -ENODEV;
-	}
-
-	tty->driver_data = info;
-
-	return tty_port_install(&info->port, driver, tty);
-}
-
-/* Called when a port is opened.  Init and enable port.
- */
-static int open(struct tty_struct *tty, struct file *filp)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-	int retval;
-
-	info->port.tty = tty;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s open(), old ref count = %d\n",
-			 __FILE__,__LINE__,tty->driver->name, info->port.count);
-
-	info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-	spin_lock_irqsave(&info->netlock, flags);
-	if (info->netcount) {
-		retval = -EBUSY;
-		spin_unlock_irqrestore(&info->netlock, flags);
-		goto cleanup;
-	}
-	info->port.count++;
-	spin_unlock_irqrestore(&info->netlock, flags);
-
-	if (info->port.count == 1) {
-		/* 1st open on this device, init hardware */
-		retval = startup(info);
-		if (retval < 0)
-			goto cleanup;
-	}
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-		if (debug_level >= DEBUG_LEVEL_INFO)
-			printk("%s(%d):%s block_til_ready() returned %d\n",
-				 __FILE__,__LINE__, info->device_name, retval);
-		goto cleanup;
-	}
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s open() success\n",
-			 __FILE__,__LINE__, info->device_name);
-	retval = 0;
-
-cleanup:
-	if (retval) {
-		if (tty->count == 1)
-			info->port.tty = NULL; /* tty layer will release tty struct */
-		if(info->port.count)
-			info->port.count--;
-	}
-
-	return retval;
-}
-
-/* Called when port is closed. Wait for remaining data to be
- * sent. Disable port and free resources.
- */
-static void close(struct tty_struct *tty, struct file *filp)
-{
-	SLMP_INFO * info = tty->driver_data;
-
-	if (sanity_check(info, tty->name, "close"))
-		return;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s close() entry, count=%d\n",
-			 __FILE__,__LINE__, info->device_name, info->port.count);
-
-	if (tty_port_close_start(&info->port, tty, filp) == 0)
-		goto cleanup;
-
-	mutex_lock(&info->port.mutex);
-	if (tty_port_initialized(&info->port))
- 		wait_until_sent(tty, info->timeout);
-
-	flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	shutdown(info);
-	mutex_unlock(&info->port.mutex);
-
-	tty_port_close_end(&info->port, tty);
-	info->port.tty = NULL;
-cleanup:
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
-			tty->driver->name, info->port.count);
-}
-
-/* Called by tty_hangup() when a hangup is signaled.
- * This is the same as closing all open descriptors for the port.
- */
-static void hangup(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s hangup()\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (sanity_check(info, tty->name, "hangup"))
-		return;
-
-	mutex_lock(&info->port.mutex);
-	flush_buffer(tty);
-	shutdown(info);
-
-	spin_lock_irqsave(&info->port.lock, flags);
-	info->port.count = 0;
-	info->port.tty = NULL;
-	spin_unlock_irqrestore(&info->port.lock, flags);
-	tty_port_set_active(&info->port, 1);
-	mutex_unlock(&info->port.mutex);
-
-	wake_up_interruptible(&info->port.open_wait);
-}
-
-/* Set new termios settings
- */
-static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
-			tty->driver->name );
-
-	change_params(info);
-
-	/* Handle transition to B0 status */
-	if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-		spin_lock_irqsave(&info->lock,flags);
-	 	set_signals(info);
-		spin_unlock_irqrestore(&info->lock,flags);
-	}
-
-	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
-		info->serial_signals |= SerialSignal_DTR;
-		if (!C_CRTSCTS(tty) || !tty_throttled(tty))
-			info->serial_signals |= SerialSignal_RTS;
-		spin_lock_irqsave(&info->lock,flags);
-	 	set_signals(info);
-		spin_unlock_irqrestore(&info->lock,flags);
-	}
-
-	/* Handle turning off CRTSCTS */
-	if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
-		tty->hw_stopped = 0;
-		tx_release(tty);
-	}
-}
-
-/* Send a block of data
- *
- * Arguments:
- *
- * 	tty		pointer to tty information structure
- * 	buf		pointer to buffer containing send data
- * 	count		size of send data in bytes
- *
- * Return Value:	number of characters written
- */
-static int write(struct tty_struct *tty,
-		 const unsigned char *buf, int count)
-{
-	int	c, ret = 0;
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s write() count=%d\n",
-		       __FILE__,__LINE__,info->device_name,count);
-
-	if (sanity_check(info, tty->name, "write"))
-		goto cleanup;
-
-	if (!info->tx_buf)
-		goto cleanup;
-
-	if (info->params.mode == MGSL_MODE_HDLC) {
-		if (count > info->max_frame_size) {
-			ret = -EIO;
-			goto cleanup;
-		}
-		if (info->tx_active)
-			goto cleanup;
-		if (info->tx_count) {
-			/* send accumulated data from send_char() calls */
-			/* as frame and wait before accepting more data. */
-			tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
-			goto start;
-		}
-		ret = info->tx_count = count;
-		tx_load_dma_buffer(info, buf, count);
-		goto start;
-	}
-
-	for (;;) {
-		c = min_t(int, count,
-			min(info->max_frame_size - info->tx_count - 1,
-			    info->max_frame_size - info->tx_put));
-		if (c <= 0)
-			break;
-			
-		memcpy(info->tx_buf + info->tx_put, buf, c);
-
-		spin_lock_irqsave(&info->lock,flags);
-		info->tx_put += c;
-		if (info->tx_put >= info->max_frame_size)
-			info->tx_put -= info->max_frame_size;
-		info->tx_count += c;
-		spin_unlock_irqrestore(&info->lock,flags);
-
-		buf += c;
-		count -= c;
-		ret += c;
-	}
-
-	if (info->params.mode == MGSL_MODE_HDLC) {
-		if (count) {
-			ret = info->tx_count = 0;
-			goto cleanup;
-		}
-		tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
-	}
-start:
- 	if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
-		spin_lock_irqsave(&info->lock,flags);
-		if (!info->tx_active)
-		 	tx_start(info);
-		spin_unlock_irqrestore(&info->lock,flags);
- 	}
-
-cleanup:
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk( "%s(%d):%s write() returning=%d\n",
-			__FILE__,__LINE__,info->device_name,ret);
-	return ret;
-}
-
-/* Add a character to the transmit buffer.
- */
-static int put_char(struct tty_struct *tty, unsigned char ch)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-	int ret = 0;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO ) {
-		printk( "%s(%d):%s put_char(%d)\n",
-			__FILE__,__LINE__,info->device_name,ch);
-	}
-
-	if (sanity_check(info, tty->name, "put_char"))
-		return 0;
-
-	if (!info->tx_buf)
-		return 0;
-
-	spin_lock_irqsave(&info->lock,flags);
-
-	if ( (info->params.mode != MGSL_MODE_HDLC) ||
-	     !info->tx_active ) {
-
-		if (info->tx_count < info->max_frame_size - 1) {
-			info->tx_buf[info->tx_put++] = ch;
-			if (info->tx_put >= info->max_frame_size)
-				info->tx_put -= info->max_frame_size;
-			info->tx_count++;
-			ret = 1;
-		}
-	}
-
-	spin_unlock_irqrestore(&info->lock,flags);
-	return ret;
-}
-
-/* Send a high-priority XON/XOFF character
- */
-static void send_xchar(struct tty_struct *tty, char ch)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s send_xchar(%d)\n",
-			 __FILE__,__LINE__, info->device_name, ch );
-
-	if (sanity_check(info, tty->name, "send_xchar"))
-		return;
-
-	info->x_char = ch;
-	if (ch) {
-		/* Make sure transmit interrupts are on */
-		spin_lock_irqsave(&info->lock,flags);
-		if (!info->tx_enabled)
-		 	tx_start(info);
-		spin_unlock_irqrestore(&info->lock,flags);
-	}
-}
-
-/* Wait until the transmitter is empty.
- */
-static void wait_until_sent(struct tty_struct *tty, int timeout)
-{
-	SLMP_INFO * info = tty->driver_data;
-	unsigned long orig_jiffies, char_time;
-
-	if (!info )
-		return;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s wait_until_sent() entry\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (sanity_check(info, tty->name, "wait_until_sent"))
-		return;
-
-	if (!tty_port_initialized(&info->port))
-		goto exit;
-
-	orig_jiffies = jiffies;
-
-	/* Set check interval to 1/5 of estimated time to
-	 * send a character, and make it at least 1. The check
-	 * interval should also be less than the timeout.
-	 * Note: use tight timings here to satisfy the NIST-PCTS.
-	 */
-
-	if ( info->params.data_rate ) {
-	       	char_time = info->timeout/(32 * 5);
-		if (!char_time)
-			char_time++;
-	} else
-		char_time = 1;
-
-	if (timeout)
-		char_time = min_t(unsigned long, char_time, timeout);
-
-	if ( info->params.mode == MGSL_MODE_HDLC ) {
-		while (info->tx_active) {
-			msleep_interruptible(jiffies_to_msecs(char_time));
-			if (signal_pending(current))
-				break;
-			if (timeout && time_after(jiffies, orig_jiffies + timeout))
-				break;
-		}
-	} else {
-		/*
-		 * TODO: determine if there is something similar to USC16C32
-		 * 	 TXSTATUS_ALL_SENT status
-		 */
-		while ( info->tx_active && info->tx_enabled) {
-			msleep_interruptible(jiffies_to_msecs(char_time));
-			if (signal_pending(current))
-				break;
-			if (timeout && time_after(jiffies, orig_jiffies + timeout))
-				break;
-		}
-	}
-
-exit:
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s wait_until_sent() exit\n",
-			 __FILE__,__LINE__, info->device_name );
-}
-
-/* Return the count of free bytes in transmit buffer
- */
-static int write_room(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	int ret;
-
-	if (sanity_check(info, tty->name, "write_room"))
-		return 0;
-
-	if (info->params.mode == MGSL_MODE_HDLC) {
-		ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
-	} else {
-		ret = info->max_frame_size - info->tx_count - 1;
-		if (ret < 0)
-			ret = 0;
-	}
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s write_room()=%d\n",
-		       __FILE__, __LINE__, info->device_name, ret);
-
-	return ret;
-}
-
-/* enable transmitter and send remaining buffered characters
- */
-static void flush_chars(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
-			__FILE__,__LINE__,info->device_name,info->tx_count);
-
-	if (sanity_check(info, tty->name, "flush_chars"))
-		return;
-
-	if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
-	    !info->tx_buf)
-		return;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
-			__FILE__,__LINE__,info->device_name );
-
-	spin_lock_irqsave(&info->lock,flags);
-
-	if (!info->tx_active) {
-		if ( (info->params.mode == MGSL_MODE_HDLC) &&
-			info->tx_count ) {
-			/* operating in synchronous (frame oriented) mode */
-			/* copy data from circular tx_buf to */
-			/* transmit DMA buffer. */
-			tx_load_dma_buffer(info,
-				 info->tx_buf,info->tx_count);
-		}
-	 	tx_start(info);
-	}
-
-	spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Discard all data in the send buffer
- */
-static void flush_buffer(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s flush_buffer() entry\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (sanity_check(info, tty->name, "flush_buffer"))
-		return;
-
-	spin_lock_irqsave(&info->lock,flags);
-	info->tx_count = info->tx_put = info->tx_get = 0;
-	del_timer(&info->tx_timer);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	tty_wakeup(tty);
-}
-
-/* throttle (stop) transmitter
- */
-static void tx_hold(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (sanity_check(info, tty->name, "tx_hold"))
-		return;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("%s(%d):%s tx_hold()\n",
-			__FILE__,__LINE__,info->device_name);
-
-	spin_lock_irqsave(&info->lock,flags);
-	if (info->tx_enabled)
-	 	tx_stop(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* release (start) transmitter
- */
-static void tx_release(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (sanity_check(info, tty->name, "tx_release"))
-		return;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("%s(%d):%s tx_release()\n",
-			__FILE__,__LINE__,info->device_name);
-
-	spin_lock_irqsave(&info->lock,flags);
-	if (!info->tx_enabled)
-	 	tx_start(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Service an IOCTL request
- *
- * Arguments:
- *
- * 	tty	pointer to tty instance data
- * 	cmd	IOCTL command code
- * 	arg	command argument/context
- *
- * Return Value:	0 if success, otherwise error code
- */
-static int ioctl(struct tty_struct *tty,
-		 unsigned int cmd, unsigned long arg)
-{
-	SLMP_INFO *info = tty->driver_data;
-	void __user *argp = (void __user *)arg;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
-			info->device_name, cmd );
-
-	if (sanity_check(info, tty->name, "ioctl"))
-		return -ENODEV;
-
-	if (cmd != TIOCMIWAIT) {
-		if (tty_io_error(tty))
-		    return -EIO;
-	}
-
-	switch (cmd) {
-	case MGSL_IOCGPARAMS:
-		return get_params(info, argp);
-	case MGSL_IOCSPARAMS:
-		return set_params(info, argp);
-	case MGSL_IOCGTXIDLE:
-		return get_txidle(info, argp);
-	case MGSL_IOCSTXIDLE:
-		return set_txidle(info, (int)arg);
-	case MGSL_IOCTXENABLE:
-		return tx_enable(info, (int)arg);
-	case MGSL_IOCRXENABLE:
-		return rx_enable(info, (int)arg);
-	case MGSL_IOCTXABORT:
-		return tx_abort(info);
-	case MGSL_IOCGSTATS:
-		return get_stats(info, argp);
-	case MGSL_IOCWAITEVENT:
-		return wait_mgsl_event(info, argp);
-	case MGSL_IOCLOOPTXDONE:
-		return 0; // TODO: Not supported, need to document
-		/* Wait for modem input (DCD,RI,DSR,CTS) change
-		 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
-		 */
-	case TIOCMIWAIT:
-		return modem_input_wait(info,(int)arg);
-		
-		/*
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static int get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	SLMP_INFO *info = tty->driver_data;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->lock,flags);
-	cnow = info->icount;
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	return 0;
-}
-
-/*
- * /proc fs routines....
- */
-
-static inline void line_info(struct seq_file *m, SLMP_INFO *info)
-{
-	char	stat_buf[30];
-	unsigned long flags;
-
-	seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
-		       "\tIRQ=%d MaxFrameSize=%u\n",
-		info->device_name,
-		info->phys_sca_base,
-		info->phys_memory_base,
-		info->phys_statctrl_base,
-		info->phys_lcr_base,
-		info->irq_level,
-		info->max_frame_size );
-
-	/* output current serial signal states */
-	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	stat_buf[0] = 0;
-	stat_buf[1] = 0;
-	if (info->serial_signals & SerialSignal_RTS)
-		strcat(stat_buf, "|RTS");
-	if (info->serial_signals & SerialSignal_CTS)
-		strcat(stat_buf, "|CTS");
-	if (info->serial_signals & SerialSignal_DTR)
-		strcat(stat_buf, "|DTR");
-	if (info->serial_signals & SerialSignal_DSR)
-		strcat(stat_buf, "|DSR");
-	if (info->serial_signals & SerialSignal_DCD)
-		strcat(stat_buf, "|CD");
-	if (info->serial_signals & SerialSignal_RI)
-		strcat(stat_buf, "|RI");
-
-	if (info->params.mode == MGSL_MODE_HDLC) {
-		seq_printf(m, "\tHDLC txok:%d rxok:%d",
-			      info->icount.txok, info->icount.rxok);
-		if (info->icount.txunder)
-			seq_printf(m, " txunder:%d", info->icount.txunder);
-		if (info->icount.txabort)
-			seq_printf(m, " txabort:%d", info->icount.txabort);
-		if (info->icount.rxshort)
-			seq_printf(m, " rxshort:%d", info->icount.rxshort);
-		if (info->icount.rxlong)
-			seq_printf(m, " rxlong:%d", info->icount.rxlong);
-		if (info->icount.rxover)
-			seq_printf(m, " rxover:%d", info->icount.rxover);
-		if (info->icount.rxcrc)
-			seq_printf(m, " rxlong:%d", info->icount.rxcrc);
-	} else {
-		seq_printf(m, "\tASYNC tx:%d rx:%d",
-			      info->icount.tx, info->icount.rx);
-		if (info->icount.frame)
-			seq_printf(m, " fe:%d", info->icount.frame);
-		if (info->icount.parity)
-			seq_printf(m, " pe:%d", info->icount.parity);
-		if (info->icount.brk)
-			seq_printf(m, " brk:%d", info->icount.brk);
-		if (info->icount.overrun)
-			seq_printf(m, " oe:%d", info->icount.overrun);
-	}
-
-	/* Append serial signal status to end */
-	seq_printf(m, " %s\n", stat_buf+1);
-
-	seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
-	 info->tx_active,info->bh_requested,info->bh_running,
-	 info->pending_bh);
-}
-
-/* Called to print information about devices
- */
-static int synclinkmp_proc_show(struct seq_file *m, void *v)
-{
-	SLMP_INFO *info;
-
-	seq_printf(m, "synclinkmp driver:%s\n", driver_version);
-
-	info = synclinkmp_device_list;
-	while( info ) {
-		line_info(m, info);
-		info = info->next_device;
-	}
-	return 0;
-}
-
-/* Return the count of bytes in transmit buffer
- */
-static int chars_in_buffer(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-
-	if (sanity_check(info, tty->name, "chars_in_buffer"))
-		return 0;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s chars_in_buffer()=%d\n",
-		       __FILE__, __LINE__, info->device_name, info->tx_count);
-
-	return info->tx_count;
-}
-
-/* Signal remote device to throttle send data (our receive data)
- */
-static void throttle(struct tty_struct * tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s throttle() entry\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (sanity_check(info, tty->name, "throttle"))
-		return;
-
-	if (I_IXOFF(tty))
-		send_xchar(tty, STOP_CHAR(tty));
-
-	if (C_CRTSCTS(tty)) {
-		spin_lock_irqsave(&info->lock,flags);
-		info->serial_signals &= ~SerialSignal_RTS;
-		set_signals(info);
-		spin_unlock_irqrestore(&info->lock,flags);
-	}
-}
-
-/* Signal remote device to stop throttling send data (our receive data)
- */
-static void unthrottle(struct tty_struct * tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s unthrottle() entry\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	if (sanity_check(info, tty->name, "unthrottle"))
-		return;
-
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			send_xchar(tty, START_CHAR(tty));
-	}
-
-	if (C_CRTSCTS(tty)) {
-		spin_lock_irqsave(&info->lock,flags);
-		info->serial_signals |= SerialSignal_RTS;
-		set_signals(info);
-		spin_unlock_irqrestore(&info->lock,flags);
-	}
-}
-
-/* set or clear transmit break condition
- * break_state	-1=set break condition, 0=clear
- */
-static int set_break(struct tty_struct *tty, int break_state)
-{
-	unsigned char RegValue;
-	SLMP_INFO * info = tty->driver_data;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s set_break(%d)\n",
-			 __FILE__,__LINE__, info->device_name, break_state);
-
-	if (sanity_check(info, tty->name, "set_break"))
-		return -EINVAL;
-
-	spin_lock_irqsave(&info->lock,flags);
-	RegValue = read_reg(info, CTL);
- 	if (break_state == -1)
-		RegValue |= BIT3;
-	else
-		RegValue &= ~BIT3;
-	write_reg(info, CTL, RegValue);
-	spin_unlock_irqrestore(&info->lock,flags);
-	return 0;
-}
-
-#if SYNCLINK_GENERIC_HDLC
-
-/**
- * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
- * @dev:      pointer to network device structure
- * @encoding: serial encoding setting
- * @parity:   FCS setting
- *
- * Set encoding and frame check sequence (FCS) options.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
-			  unsigned short parity)
-{
-	SLMP_INFO *info = dev_to_port(dev);
-	unsigned char  new_encoding;
-	unsigned short new_crctype;
-
-	/* return error if TTY interface open */
-	if (info->port.count)
-		return -EBUSY;
-
-	switch (encoding)
-	{
-	case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
-	case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
-	case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
-	case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
-	case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
-	default: return -EINVAL;
-	}
-
-	switch (parity)
-	{
-	case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
-	case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
-	case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
-	default: return -EINVAL;
-	}
-
-	info->params.encoding = new_encoding;
-	info->params.crc_type = new_crctype;
-
-	/* if network interface up, reprogram hardware */
-	if (info->netcount)
-		program_hw(info);
-
-	return 0;
-}
-
-/**
- * hdlcdev_xmit - called by generic HDLC layer to send frame
- * @skb: socket buffer containing HDLC frame
- * @dev: pointer to network device structure
- */
-static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
-				      struct net_device *dev)
-{
-	SLMP_INFO *info = dev_to_port(dev);
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
-
-	/* stop sending until this frame completes */
-	netif_stop_queue(dev);
-
-	/* copy data to device buffers */
-	info->tx_count = skb->len;
-	tx_load_dma_buffer(info, skb->data, skb->len);
-
-	/* update network statistics */
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += skb->len;
-
-	/* done with socket buffer, so free it */
-	dev_kfree_skb(skb);
-
-	/* save start time for transmit timeout detection */
-	netif_trans_update(dev);
-
-	/* start hardware transmitter if necessary */
-	spin_lock_irqsave(&info->lock,flags);
-	if (!info->tx_active)
-	 	tx_start(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	return NETDEV_TX_OK;
-}
-
-/**
- * hdlcdev_open - called by network layer when interface enabled
- * @dev: pointer to network device structure
- *
- * Claim resources and initialize hardware.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_open(struct net_device *dev)
-{
-	SLMP_INFO *info = dev_to_port(dev);
-	int rc;
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
-
-	/* generic HDLC layer open processing */
-	rc = hdlc_open(dev);
-	if (rc)
-		return rc;
-
-	/* arbitrate between network and tty opens */
-	spin_lock_irqsave(&info->netlock, flags);
-	if (info->port.count != 0 || info->netcount != 0) {
-		printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
-		spin_unlock_irqrestore(&info->netlock, flags);
-		return -EBUSY;
-	}
-	info->netcount=1;
-	spin_unlock_irqrestore(&info->netlock, flags);
-
-	/* claim resources and init adapter */
-	if ((rc = startup(info)) != 0) {
-		spin_lock_irqsave(&info->netlock, flags);
-		info->netcount=0;
-		spin_unlock_irqrestore(&info->netlock, flags);
-		return rc;
-	}
-
-	/* assert RTS and DTR, apply hardware settings */
-	info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
-	program_hw(info);
-
-	/* enable network layer transmit */
-	netif_trans_update(dev);
-	netif_start_queue(dev);
-
-	/* inform generic HDLC layer of current DCD status */
-	spin_lock_irqsave(&info->lock, flags);
-	get_signals(info);
-	spin_unlock_irqrestore(&info->lock, flags);
-	if (info->serial_signals & SerialSignal_DCD)
-		netif_carrier_on(dev);
-	else
-		netif_carrier_off(dev);
-	return 0;
-}
-
-/**
- * hdlcdev_close - called by network layer when interface is disabled
- * @dev: pointer to network device structure
- *
- * Shutdown hardware and release resources.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_close(struct net_device *dev)
-{
-	SLMP_INFO *info = dev_to_port(dev);
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
-
-	netif_stop_queue(dev);
-
-	/* shutdown adapter and release resources */
-	shutdown(info);
-
-	hdlc_close(dev);
-
-	spin_lock_irqsave(&info->netlock, flags);
-	info->netcount=0;
-	spin_unlock_irqrestore(&info->netlock, flags);
-
-	return 0;
-}
-
-/**
- * hdlcdev_ioctl - called by network layer to process IOCTL call to network device
- * @dev: pointer to network device structure
- * @ifr: pointer to network interface request structure
- * @cmd: IOCTL command code
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	const size_t size = sizeof(sync_serial_settings);
-	sync_serial_settings new_line;
-	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
-	SLMP_INFO *info = dev_to_port(dev);
-	unsigned int flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
-
-	/* return error if TTY interface open */
-	if (info->port.count)
-		return -EBUSY;
-
-	if (cmd != SIOCWANDEV)
-		return hdlc_ioctl(dev, ifr, cmd);
-
-	switch(ifr->ifr_settings.type) {
-	case IF_GET_IFACE: /* return current sync_serial_settings */
-
-		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
-		if (ifr->ifr_settings.size < size) {
-			ifr->ifr_settings.size = size; /* data size wanted */
-			return -ENOBUFS;
-		}
-
-		flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
-					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
-					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
-					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
-
-		memset(&new_line, 0, sizeof(new_line));
-		switch (flags){
-		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
-		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
-		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
-		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
-		default: new_line.clock_type = CLOCK_DEFAULT;
-		}
-
-		new_line.clock_rate = info->params.clock_speed;
-		new_line.loopback   = info->params.loopback ? 1:0;
-
-		if (copy_to_user(line, &new_line, size))
-			return -EFAULT;
-		return 0;
-
-	case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
-
-		if(!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		if (copy_from_user(&new_line, line, size))
-			return -EFAULT;
-
-		switch (new_line.clock_type)
-		{
-		case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
-		case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
-		case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
-		case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
-		case CLOCK_DEFAULT:  flags = info->params.flags &
-					     (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
-					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
-					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
-					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
-		default: return -EINVAL;
-		}
-
-		if (new_line.loopback != 0 && new_line.loopback != 1)
-			return -EINVAL;
-
-		info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
-					HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
-					HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
-					HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
-		info->params.flags |= flags;
-
-		info->params.loopback = new_line.loopback;
-
-		if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
-			info->params.clock_speed = new_line.clock_rate;
-		else
-			info->params.clock_speed = 0;
-
-		/* if network interface up, reprogram hardware */
-		if (info->netcount)
-			program_hw(info);
-		return 0;
-
-	default:
-		return hdlc_ioctl(dev, ifr, cmd);
-	}
-}
-
-/**
- * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected
- * @dev: pointer to network device structure
- */
-static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
-	SLMP_INFO *info = dev_to_port(dev);
-	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("hdlcdev_tx_timeout(%s)\n",dev->name);
-
-	dev->stats.tx_errors++;
-	dev->stats.tx_aborted_errors++;
-
-	spin_lock_irqsave(&info->lock,flags);
-	tx_stop(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	netif_wake_queue(dev);
-}
-
-/**
- * hdlcdev_tx_done - called by device driver when transmit completes
- * @info: pointer to device instance information
- *
- * Reenable network layer transmit if stopped.
- */
-static void hdlcdev_tx_done(SLMP_INFO *info)
-{
-	if (netif_queue_stopped(info->netdev))
-		netif_wake_queue(info->netdev);
-}
-
-/**
- * hdlcdev_rx - called by device driver when frame received
- * @info: pointer to device instance information
- * @buf:  pointer to buffer contianing frame data
- * @size: count of data bytes in buf
- *
- * Pass frame to network layer.
- */
-static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
-{
-	struct sk_buff *skb = dev_alloc_skb(size);
-	struct net_device *dev = info->netdev;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("hdlcdev_rx(%s)\n",dev->name);
-
-	if (skb == NULL) {
-		printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
-		       dev->name);
-		dev->stats.rx_dropped++;
-		return;
-	}
-
-	skb_put_data(skb, buf, size);
-
-	skb->protocol = hdlc_type_trans(skb, dev);
-
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += size;
-
-	netif_rx(skb);
-}
-
-static const struct net_device_ops hdlcdev_ops = {
-	.ndo_open       = hdlcdev_open,
-	.ndo_stop       = hdlcdev_close,
-	.ndo_start_xmit = hdlc_start_xmit,
-	.ndo_do_ioctl   = hdlcdev_ioctl,
-	.ndo_tx_timeout = hdlcdev_tx_timeout,
-};
-
-/**
- * hdlcdev_init - called by device driver when adding device instance
- * @info: pointer to device instance information
- *
- * Do generic HDLC initialization.
- *
- * Return: 0 if success, otherwise error code
- */
-static int hdlcdev_init(SLMP_INFO *info)
-{
-	int rc;
-	struct net_device *dev;
-	hdlc_device *hdlc;
-
-	/* allocate and initialize network and HDLC layer objects */
-
-	dev = alloc_hdlcdev(info);
-	if (!dev) {
-		printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
-		return -ENOMEM;
-	}
-
-	/* for network layer reporting purposes only */
-	dev->mem_start = info->phys_sca_base;
-	dev->mem_end   = info->phys_sca_base + SCA_BASE_SIZE - 1;
-	dev->irq       = info->irq_level;
-
-	/* network layer callbacks and settings */
-	dev->netdev_ops	    = &hdlcdev_ops;
-	dev->watchdog_timeo = 10 * HZ;
-	dev->tx_queue_len   = 50;
-
-	/* generic HDLC layer callbacks and settings */
-	hdlc         = dev_to_hdlc(dev);
-	hdlc->attach = hdlcdev_attach;
-	hdlc->xmit   = hdlcdev_xmit;
-
-	/* register objects with HDLC layer */
-	rc = register_hdlc_device(dev);
-	if (rc) {
-		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
-		free_netdev(dev);
-		return rc;
-	}
-
-	info->netdev = dev;
-	return 0;
-}
-
-/**
- * hdlcdev_exit - called by device driver when removing device instance
- * @info: pointer to device instance information
- *
- * Do generic HDLC cleanup.
- */
-static void hdlcdev_exit(SLMP_INFO *info)
-{
-	unregister_hdlc_device(info->netdev);
-	free_netdev(info->netdev);
-	info->netdev = NULL;
-}
-
-#endif /* CONFIG_HDLC */
-
-
-/* Return next bottom half action to perform.
- * Return Value:	BH action code or 0 if nothing to do.
- */
-static int bh_action(SLMP_INFO *info)
-{
-	unsigned long flags;
-	int rc = 0;
-
-	spin_lock_irqsave(&info->lock,flags);
-
-	if (info->pending_bh & BH_RECEIVE) {
-		info->pending_bh &= ~BH_RECEIVE;
-		rc = BH_RECEIVE;
-	} else if (info->pending_bh & BH_TRANSMIT) {
-		info->pending_bh &= ~BH_TRANSMIT;
-		rc = BH_TRANSMIT;
-	} else if (info->pending_bh & BH_STATUS) {
-		info->pending_bh &= ~BH_STATUS;
-		rc = BH_STATUS;
-	}
-
-	if (!rc) {
-		/* Mark BH routine as complete */
-		info->bh_running = false;
-		info->bh_requested = false;
-	}
-
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	return rc;
-}
-
-/* Perform bottom half processing of work items queued by ISR.
- */
-static void bh_handler(struct work_struct *work)
-{
-	SLMP_INFO *info = container_of(work, SLMP_INFO, task);
-	int action;
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):%s bh_handler() entry\n",
-			__FILE__,__LINE__,info->device_name);
-
-	info->bh_running = true;
-
-	while((action = bh_action(info)) != 0) {
-
-		/* Process work item */
-		if ( debug_level >= DEBUG_LEVEL_BH )
-			printk( "%s(%d):%s bh_handler() work item action=%d\n",
-				__FILE__,__LINE__,info->device_name, action);
-
-		switch (action) {
-
-		case BH_RECEIVE:
-			bh_receive(info);
-			break;
-		case BH_TRANSMIT:
-			bh_transmit(info);
-			break;
-		case BH_STATUS:
-			bh_status(info);
-			break;
-		default:
-			/* unknown work item ID */
-			printk("%s(%d):%s Unknown work item ID=%08X!\n",
-				__FILE__,__LINE__,info->device_name,action);
-			break;
-		}
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):%s bh_handler() exit\n",
-			__FILE__,__LINE__,info->device_name);
-}
-
-static void bh_receive(SLMP_INFO *info)
-{
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):%s bh_receive()\n",
-			__FILE__,__LINE__,info->device_name);
-
-	while( rx_get_frame(info) );
-}
-
-static void bh_transmit(SLMP_INFO *info)
-{
-	struct tty_struct *tty = info->port.tty;
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):%s bh_transmit() entry\n",
-			__FILE__,__LINE__,info->device_name);
-
-	if (tty)
-		tty_wakeup(tty);
-}
-
-static void bh_status(SLMP_INFO *info)
-{
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk( "%s(%d):%s bh_status() entry\n",
-			__FILE__,__LINE__,info->device_name);
-
-	info->ri_chkcount = 0;
-	info->dsr_chkcount = 0;
-	info->dcd_chkcount = 0;
-	info->cts_chkcount = 0;
-}
-
-static void isr_timer(SLMP_INFO * info)
-{
-	unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
-
-	/* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
-	write_reg(info, IER2, 0);
-
-	/* TMCS, Timer Control/Status Register
-	 *
-	 * 07      CMF, Compare match flag (read only) 1=match
-	 * 06      ECMI, CMF Interrupt Enable: 0=disabled
-	 * 05      Reserved, must be 0
-	 * 04      TME, Timer Enable
-	 * 03..00  Reserved, must be 0
-	 *
-	 * 0000 0000
-	 */
-	write_reg(info, (unsigned char)(timer + TMCS), 0);
-
-	info->irq_occurred = true;
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_timer()\n",
-			__FILE__,__LINE__,info->device_name);
-}
-
-static void isr_rxint(SLMP_INFO * info)
-{
- 	struct tty_struct *tty = info->port.tty;
- 	struct	mgsl_icount *icount = &info->icount;
-	unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
-	unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
-
-	/* clear status bits */
-	if (status)
-		write_reg(info, SR1, status);
-
-	if (status2)
-		write_reg(info, SR2, status2);
-	
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_rxint status=%02X %02x\n",
-			__FILE__,__LINE__,info->device_name,status,status2);
-
-	if (info->params.mode == MGSL_MODE_ASYNC) {
-		if (status & BRKD) {
-			icount->brk++;
-
-			/* process break detection if tty control
-			 * is not set to ignore it
-			 */
-			if (!(status & info->ignore_status_mask1)) {
-				if (info->read_status_mask1 & BRKD) {
-					tty_insert_flip_char(&info->port, 0, TTY_BREAK);
-					if (tty && (info->port.flags & ASYNC_SAK))
-						do_SAK(tty);
-				}
-			}
-		}
-	}
-	else {
-		if (status & (FLGD|IDLD)) {
-			if (status & FLGD)
-				info->icount.exithunt++;
-			else if (status & IDLD)
-				info->icount.rxidle++;
-			wake_up_interruptible(&info->event_wait_q);
-		}
-	}
-
-	if (status & CDCD) {
-		/* simulate a common modem status change interrupt
-		 * for our handler
-		 */
-		get_signals( info );
-		isr_io_pin(info,
-			MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
-	}
-}
-
-/*
- * handle async rx data interrupts
- */
-static void isr_rxrdy(SLMP_INFO * info)
-{
-	u16 status;
-	unsigned char DataByte;
- 	struct	mgsl_icount *icount = &info->icount;
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_rxrdy\n",
-			__FILE__,__LINE__,info->device_name);
-
-	while((status = read_reg(info,CST0)) & BIT0)
-	{
-		int flag = 0;
-		bool over = false;
-		DataByte = read_reg(info,TRB);
-
-		icount->rx++;
-
-		if ( status & (PE + FRME + OVRN) ) {
-			printk("%s(%d):%s rxerr=%04X\n",
-				__FILE__,__LINE__,info->device_name,status);
-
-			/* update error statistics */
-			if (status & PE)
-				icount->parity++;
-			else if (status & FRME)
-				icount->frame++;
-			else if (status & OVRN)
-				icount->overrun++;
-
-			/* discard char if tty control flags say so */
-			if (status & info->ignore_status_mask2)
-				continue;
-
-			status &= info->read_status_mask2;
-
-			if (status & PE)
-				flag = TTY_PARITY;
-			else if (status & FRME)
-				flag = TTY_FRAME;
-			if (status & OVRN) {
-				/* Overrun is special, since it's
-				 * reported immediately, and doesn't
-				 * affect the current character
-				 */
-				over = true;
-			}
-		}	/* end of if (error) */
-
-		tty_insert_flip_char(&info->port, DataByte, flag);
-		if (over)
-			tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_ISR ) {
-		printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
-			__FILE__,__LINE__,info->device_name,
-			icount->rx,icount->brk,icount->parity,
-			icount->frame,icount->overrun);
-	}
-
-	tty_flip_buffer_push(&info->port);
-}
-
-static void isr_txeom(SLMP_INFO * info, unsigned char status)
-{
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_txeom status=%02x\n",
-			__FILE__,__LINE__,info->device_name,status);
-
-	write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
-	write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
-	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
-
-	if (status & UDRN) {
-		write_reg(info, CMD, TXRESET);
-		write_reg(info, CMD, TXENABLE);
-	} else
-		write_reg(info, CMD, TXBUFCLR);
-
-	/* disable and clear tx interrupts */
-	info->ie0_value &= ~TXRDYE;
-	info->ie1_value &= ~(IDLE + UDRN);
-	write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
-	write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
-
-	if ( info->tx_active ) {
-		if (info->params.mode != MGSL_MODE_ASYNC) {
-			if (status & UDRN)
-				info->icount.txunder++;
-			else if (status & IDLE)
-				info->icount.txok++;
-		}
-
-		info->tx_active = false;
-		info->tx_count = info->tx_put = info->tx_get = 0;
-
-		del_timer(&info->tx_timer);
-
-		if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
-			info->serial_signals &= ~SerialSignal_RTS;
-			info->drop_rts_on_tx_done = false;
-			set_signals(info);
-		}
-
-#if SYNCLINK_GENERIC_HDLC
-		if (info->netcount)
-			hdlcdev_tx_done(info);
-		else
-#endif
-		{
-			if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
-				tx_stop(info);
-				return;
-			}
-			info->pending_bh |= BH_TRANSMIT;
-		}
-	}
-}
-
-
-/*
- * handle tx status interrupts
- */
-static void isr_txint(SLMP_INFO * info)
-{
-	unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
-
-	/* clear status bits */
-	write_reg(info, SR1, status);
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_txint status=%02x\n",
-			__FILE__,__LINE__,info->device_name,status);
-
-	if (status & (UDRN + IDLE))
-		isr_txeom(info, status);
-
-	if (status & CCTS) {
-		/* simulate a common modem status change interrupt
-		 * for our handler
-		 */
-		get_signals( info );
-		isr_io_pin(info,
-			MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
-
-	}
-}
-
-/*
- * handle async tx data interrupts
- */
-static void isr_txrdy(SLMP_INFO * info)
-{
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
-			__FILE__,__LINE__,info->device_name,info->tx_count);
-
-	if (info->params.mode != MGSL_MODE_ASYNC) {
-		/* disable TXRDY IRQ, enable IDLE IRQ */
-		info->ie0_value &= ~TXRDYE;
-		info->ie1_value |= IDLE;
-		write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
-		return;
-	}
-
-	if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
-		tx_stop(info);
-		return;
-	}
-
-	if ( info->tx_count )
-		tx_load_fifo( info );
-	else {
-		info->tx_active = false;
-		info->ie0_value &= ~TXRDYE;
-		write_reg(info, IE0, info->ie0_value);
-	}
-
-	if (info->tx_count < WAKEUP_CHARS)
-		info->pending_bh |= BH_TRANSMIT;
-}
-
-static void isr_rxdmaok(SLMP_INFO * info)
-{
-	/* BIT7 = EOT (end of transfer)
-	 * BIT6 = EOM (end of message/frame)
-	 */
-	unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
-
-	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
-	write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
-			__FILE__,__LINE__,info->device_name,status);
-
-	info->pending_bh |= BH_RECEIVE;
-}
-
-static void isr_rxdmaerror(SLMP_INFO * info)
-{
-	/* BIT5 = BOF (buffer overflow)
-	 * BIT4 = COF (counter overflow)
-	 */
-	unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
-
-	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
-	write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
-			__FILE__,__LINE__,info->device_name,status);
-
-	info->rx_overflow = true;
-	info->pending_bh |= BH_RECEIVE;
-}
-
-static void isr_txdmaok(SLMP_INFO * info)
-{
-	unsigned char status_reg1 = read_reg(info, SR1);
-
-	write_reg(info, TXDMA + DIR, 0x00);	/* disable Tx DMA IRQs */
-	write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
-	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
-			__FILE__,__LINE__,info->device_name,status_reg1);
-
-	/* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
-	write_reg16(info, TRC0, 0);
-	info->ie0_value |= TXRDYE;
-	write_reg(info, IE0, info->ie0_value);
-}
-
-static void isr_txdmaerror(SLMP_INFO * info)
-{
-	/* BIT5 = BOF (buffer overflow)
-	 * BIT4 = COF (counter overflow)
-	 */
-	unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
-
-	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
-	write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
-			__FILE__,__LINE__,info->device_name,status);
-}
-
-/* handle input serial signal changes
- */
-static void isr_io_pin( SLMP_INFO *info, u16 status )
-{
- 	struct	mgsl_icount *icount;
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk("%s(%d):isr_io_pin status=%04X\n",
-			__FILE__,__LINE__,status);
-
-	if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
-	              MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
-		icount = &info->icount;
-		/* update input line counters */
-		if (status & MISCSTATUS_RI_LATCHED) {
-			icount->rng++;
-			if ( status & SerialSignal_RI )
-				info->input_signal_events.ri_up++;
-			else
-				info->input_signal_events.ri_down++;
-		}
-		if (status & MISCSTATUS_DSR_LATCHED) {
-			icount->dsr++;
-			if ( status & SerialSignal_DSR )
-				info->input_signal_events.dsr_up++;
-			else
-				info->input_signal_events.dsr_down++;
-		}
-		if (status & MISCSTATUS_DCD_LATCHED) {
-			if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
-				info->ie1_value &= ~CDCD;
-				write_reg(info, IE1, info->ie1_value);
-			}
-			icount->dcd++;
-			if (status & SerialSignal_DCD) {
-				info->input_signal_events.dcd_up++;
-			} else
-				info->input_signal_events.dcd_down++;
-#if SYNCLINK_GENERIC_HDLC
-			if (info->netcount) {
-				if (status & SerialSignal_DCD)
-					netif_carrier_on(info->netdev);
-				else
-					netif_carrier_off(info->netdev);
-			}
-#endif
-		}
-		if (status & MISCSTATUS_CTS_LATCHED)
-		{
-			if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
-				info->ie1_value &= ~CCTS;
-				write_reg(info, IE1, info->ie1_value);
-			}
-			icount->cts++;
-			if ( status & SerialSignal_CTS )
-				info->input_signal_events.cts_up++;
-			else
-				info->input_signal_events.cts_down++;
-		}
-		wake_up_interruptible(&info->status_event_wait_q);
-		wake_up_interruptible(&info->event_wait_q);
-
-		if (tty_port_check_carrier(&info->port) &&
-		     (status & MISCSTATUS_DCD_LATCHED) ) {
-			if ( debug_level >= DEBUG_LEVEL_ISR )
-				printk("%s CD now %s...", info->device_name,
-				       (status & SerialSignal_DCD) ? "on" : "off");
-			if (status & SerialSignal_DCD)
-				wake_up_interruptible(&info->port.open_wait);
-			else {
-				if ( debug_level >= DEBUG_LEVEL_ISR )
-					printk("doing serial hangup...");
-				if (info->port.tty)
-					tty_hangup(info->port.tty);
-			}
-		}
-
-		if (tty_port_cts_enabled(&info->port) &&
-		     (status & MISCSTATUS_CTS_LATCHED) ) {
-			if ( info->port.tty ) {
-				if (info->port.tty->hw_stopped) {
-					if (status & SerialSignal_CTS) {
-						if ( debug_level >= DEBUG_LEVEL_ISR )
-							printk("CTS tx start...");
-						info->port.tty->hw_stopped = 0;
-						tx_start(info);
-						info->pending_bh |= BH_TRANSMIT;
-						return;
-					}
-				} else {
-					if (!(status & SerialSignal_CTS)) {
-						if ( debug_level >= DEBUG_LEVEL_ISR )
-							printk("CTS tx stop...");
-						info->port.tty->hw_stopped = 1;
-						tx_stop(info);
-					}
-				}
-			}
-		}
-	}
-
-	info->pending_bh |= BH_STATUS;
-}
-
-/* Interrupt service routine entry point.
- *
- * Arguments:
- * 	irq		interrupt number that caused interrupt
- * 	dev_id		device ID supplied during interrupt registration
- * 	regs		interrupted processor context
- */
-static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
-{
-	SLMP_INFO *info = dev_id;
-	unsigned char status, status0, status1=0;
-	unsigned char dmastatus, dmastatus0, dmastatus1=0;
-	unsigned char timerstatus0, timerstatus1=0;
-	unsigned char shift;
-	unsigned int i;
-	unsigned short tmp;
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
-			__FILE__, __LINE__, info->irq_level);
-
-	spin_lock(&info->lock);
-
-	for(;;) {
-
-		/* get status for SCA0 (ports 0-1) */
-		tmp = read_reg16(info, ISR0);	/* get ISR0 and ISR1 in one read */
-		status0 = (unsigned char)tmp;
-		dmastatus0 = (unsigned char)(tmp>>8);
-		timerstatus0 = read_reg(info, ISR2);
-
-		if ( debug_level >= DEBUG_LEVEL_ISR )
-			printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
-				__FILE__, __LINE__, info->device_name,
-				status0, dmastatus0, timerstatus0);
-
-		if (info->port_count == 4) {
-			/* get status for SCA1 (ports 2-3) */
-			tmp = read_reg16(info->port_array[2], ISR0);
-			status1 = (unsigned char)tmp;
-			dmastatus1 = (unsigned char)(tmp>>8);
-			timerstatus1 = read_reg(info->port_array[2], ISR2);
-
-			if ( debug_level >= DEBUG_LEVEL_ISR )
-				printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
-					__FILE__,__LINE__,info->device_name,
-					status1,dmastatus1,timerstatus1);
-		}
-
-		if (!status0 && !dmastatus0 && !timerstatus0 &&
-			 !status1 && !dmastatus1 && !timerstatus1)
-			break;
-
-		for(i=0; i < info->port_count ; i++) {
-			if (info->port_array[i] == NULL)
-				continue;
-			if (i < 2) {
-				status = status0;
-				dmastatus = dmastatus0;
-			} else {
-				status = status1;
-				dmastatus = dmastatus1;
-			}
-
-			shift = i & 1 ? 4 :0;
-
-			if (status & BIT0 << shift)
-				isr_rxrdy(info->port_array[i]);
-			if (status & BIT1 << shift)
-				isr_txrdy(info->port_array[i]);
-			if (status & BIT2 << shift)
-				isr_rxint(info->port_array[i]);
-			if (status & BIT3 << shift)
-				isr_txint(info->port_array[i]);
-
-			if (dmastatus & BIT0 << shift)
-				isr_rxdmaerror(info->port_array[i]);
-			if (dmastatus & BIT1 << shift)
-				isr_rxdmaok(info->port_array[i]);
-			if (dmastatus & BIT2 << shift)
-				isr_txdmaerror(info->port_array[i]);
-			if (dmastatus & BIT3 << shift)
-				isr_txdmaok(info->port_array[i]);
-		}
-
-		if (timerstatus0 & (BIT5 | BIT4))
-			isr_timer(info->port_array[0]);
-		if (timerstatus0 & (BIT7 | BIT6))
-			isr_timer(info->port_array[1]);
-		if (timerstatus1 & (BIT5 | BIT4))
-			isr_timer(info->port_array[2]);
-		if (timerstatus1 & (BIT7 | BIT6))
-			isr_timer(info->port_array[3]);
-	}
-
-	for(i=0; i < info->port_count ; i++) {
-		SLMP_INFO * port = info->port_array[i];
-
-		/* Request bottom half processing if there's something
-		 * for it to do and the bh is not already running.
-		 *
-		 * Note: startup adapter diags require interrupts.
-		 * do not request bottom half processing if the
-		 * device is not open in a normal mode.
-		 */
-		if ( port && (port->port.count || port->netcount) &&
-		     port->pending_bh && !port->bh_running &&
-		     !port->bh_requested ) {
-			if ( debug_level >= DEBUG_LEVEL_ISR )
-				printk("%s(%d):%s queueing bh task.\n",
-					__FILE__,__LINE__,port->device_name);
-			schedule_work(&port->task);
-			port->bh_requested = true;
-		}
-	}
-
-	spin_unlock(&info->lock);
-
-	if ( debug_level >= DEBUG_LEVEL_ISR )
-		printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
-			__FILE__, __LINE__, info->irq_level);
-	return IRQ_HANDLED;
-}
-
-/* Initialize and start device.
- */
-static int startup(SLMP_INFO * info)
-{
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
-
-	if (tty_port_initialized(&info->port))
-		return 0;
-
-	if (!info->tx_buf) {
-		info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
-		if (!info->tx_buf) {
-			printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
-				__FILE__,__LINE__,info->device_name);
-			return -ENOMEM;
-		}
-	}
-
-	info->pending_bh = 0;
-
-	memset(&info->icount, 0, sizeof(info->icount));
-
-	/* program hardware for current parameters */
-	reset_port(info);
-
-	change_params(info);
-
-	mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
-
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	tty_port_set_initialized(&info->port, 1);
-
-	return 0;
-}
-
-/* Called by close() and hangup() to shutdown hardware
- */
-static void shutdown(SLMP_INFO * info)
-{
-	unsigned long flags;
-
-	if (!tty_port_initialized(&info->port))
-		return;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s synclinkmp_shutdown()\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	/* clear status wait queue because status changes */
-	/* can't happen after shutting down the hardware */
-	wake_up_interruptible(&info->status_event_wait_q);
-	wake_up_interruptible(&info->event_wait_q);
-
-	del_timer(&info->tx_timer);
-	del_timer(&info->status_timer);
-
-	kfree(info->tx_buf);
-	info->tx_buf = NULL;
-
-	spin_lock_irqsave(&info->lock,flags);
-
-	reset_port(info);
-
- 	if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-		set_signals(info);
-	}
-
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	tty_port_set_initialized(&info->port, 0);
-}
-
-static void program_hw(SLMP_INFO *info)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->lock,flags);
-
-	rx_stop(info);
-	tx_stop(info);
-
-	info->tx_count = info->tx_put = info->tx_get = 0;
-
-	if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
-		hdlc_mode(info);
-	else
-		async_mode(info);
-
-	set_signals(info);
-
-	info->dcd_chkcount = 0;
-	info->cts_chkcount = 0;
-	info->ri_chkcount = 0;
-	info->dsr_chkcount = 0;
-
-	info->ie1_value |= (CDCD|CCTS);
-	write_reg(info, IE1, info->ie1_value);
-
-	get_signals(info);
-
-	if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
-		rx_start(info);
-
-	spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Reconfigure adapter based on new parameters
- */
-static void change_params(SLMP_INFO *info)
-{
-	unsigned cflag;
-	int bits_per_char;
-
-	if (!info->port.tty)
-		return;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s change_params()\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	cflag = info->port.tty->termios.c_cflag;
-
-	/* if B0 rate (hangup) specified then negate RTS and DTR */
-	/* otherwise assert RTS and DTR */
- 	if (cflag & CBAUD)
-		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
-	else
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-
-	/* byte size and parity */
-
-	switch (cflag & CSIZE) {
-	      case CS5: info->params.data_bits = 5; break;
-	      case CS6: info->params.data_bits = 6; break;
-	      case CS7: info->params.data_bits = 7; break;
-	      case CS8: info->params.data_bits = 8; break;
-	      /* Never happens, but GCC is too dumb to figure it out */
-	      default:  info->params.data_bits = 7; break;
-	      }
-
-	if (cflag & CSTOPB)
-		info->params.stop_bits = 2;
-	else
-		info->params.stop_bits = 1;
-
-	info->params.parity = ASYNC_PARITY_NONE;
-	if (cflag & PARENB) {
-		if (cflag & PARODD)
-			info->params.parity = ASYNC_PARITY_ODD;
-		else
-			info->params.parity = ASYNC_PARITY_EVEN;
-#ifdef CMSPAR
-		if (cflag & CMSPAR)
-			info->params.parity = ASYNC_PARITY_SPACE;
-#endif
-	}
-
-	/* calculate number of jiffies to transmit a full
-	 * FIFO (32 bytes) at specified data rate
-	 */
-	bits_per_char = info->params.data_bits +
-			info->params.stop_bits + 1;
-
-	/* if port data rate is set to 460800 or less then
-	 * allow tty settings to override, otherwise keep the
-	 * current data rate.
-	 */
-	if (info->params.data_rate <= 460800) {
-		info->params.data_rate = tty_get_baud_rate(info->port.tty);
-	}
-
-	if ( info->params.data_rate ) {
-		info->timeout = (32*HZ*bits_per_char) /
-				info->params.data_rate;
-	}
-	info->timeout += HZ/50;		/* Add .02 seconds of slop */
-
-	tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
-	tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
-
-	/* process tty input control flags */
-
-	info->read_status_mask2 = OVRN;
-	if (I_INPCK(info->port.tty))
-		info->read_status_mask2 |= PE | FRME;
-	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
-		info->read_status_mask1 |= BRKD;
-	if (I_IGNPAR(info->port.tty))
-		info->ignore_status_mask2 |= PE | FRME;
-	if (I_IGNBRK(info->port.tty)) {
-		info->ignore_status_mask1 |= BRKD;
-		/* If ignoring parity and break indicators, ignore
-		 * overruns too.  (For real raw support).
-		 */
-		if (I_IGNPAR(info->port.tty))
-			info->ignore_status_mask2 |= OVRN;
-	}
-
-	program_hw(info);
-}
-
-static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
-{
-	int err;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s get_params()\n",
-			 __FILE__,__LINE__, info->device_name);
-
-	if (!user_icount) {
-		memset(&info->icount, 0, sizeof(info->icount));
-	} else {
-		mutex_lock(&info->port.mutex);
-		COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
-		mutex_unlock(&info->port.mutex);
-		if (err)
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
-{
-	int err;
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s get_params()\n",
-			 __FILE__,__LINE__, info->device_name);
-
-	mutex_lock(&info->port.mutex);
-	COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
-	mutex_unlock(&info->port.mutex);
-	if (err) {
-		if ( debug_level >= DEBUG_LEVEL_INFO )
-			printk( "%s(%d):%s get_params() user buffer copy failed\n",
-				__FILE__,__LINE__,info->device_name);
-		return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
-{
- 	unsigned long flags;
-	MGSL_PARAMS tmp_params;
-	int err;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s set_params\n",
-			__FILE__,__LINE__,info->device_name );
-	COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
-	if (err) {
-		if ( debug_level >= DEBUG_LEVEL_INFO )
-			printk( "%s(%d):%s set_params() user buffer copy failed\n",
-				__FILE__,__LINE__,info->device_name);
-		return -EFAULT;
-	}
-
-	mutex_lock(&info->port.mutex);
-	spin_lock_irqsave(&info->lock,flags);
-	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
-	spin_unlock_irqrestore(&info->lock,flags);
-
- 	change_params(info);
-	mutex_unlock(&info->port.mutex);
-
-	return 0;
-}
-
-static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
-{
-	int err;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s get_txidle()=%d\n",
-			 __FILE__,__LINE__, info->device_name, info->idle_mode);
-
-	COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
-	if (err) {
-		if ( debug_level >= DEBUG_LEVEL_INFO )
-			printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
-				__FILE__,__LINE__,info->device_name);
-		return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int set_txidle(SLMP_INFO * info, int idle_mode)
-{
- 	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s set_txidle(%d)\n",
-			__FILE__,__LINE__,info->device_name, idle_mode );
-
-	spin_lock_irqsave(&info->lock,flags);
-	info->idle_mode = idle_mode;
-	tx_set_idle( info );
-	spin_unlock_irqrestore(&info->lock,flags);
-	return 0;
-}
-
-static int tx_enable(SLMP_INFO * info, int enable)
-{
- 	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s tx_enable(%d)\n",
-			__FILE__,__LINE__,info->device_name, enable);
-
-	spin_lock_irqsave(&info->lock,flags);
-	if ( enable ) {
-		if ( !info->tx_enabled ) {
-			tx_start(info);
-		}
-	} else {
-		if ( info->tx_enabled )
-			tx_stop(info);
-	}
-	spin_unlock_irqrestore(&info->lock,flags);
-	return 0;
-}
-
-/* abort send HDLC frame
- */
-static int tx_abort(SLMP_INFO * info)
-{
- 	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s tx_abort()\n",
-			__FILE__,__LINE__,info->device_name);
-
-	spin_lock_irqsave(&info->lock,flags);
-	if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
-		info->ie1_value &= ~UDRN;
-		info->ie1_value |= IDLE;
-		write_reg(info, IE1, info->ie1_value);	/* disable tx status interrupts */
-		write_reg(info, SR1, (unsigned char)(IDLE + UDRN));	/* clear pending */
-
-		write_reg(info, TXDMA + DSR, 0);		/* disable DMA channel */
-		write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
-
-   		write_reg(info, CMD, TXABORT);
-	}
-	spin_unlock_irqrestore(&info->lock,flags);
-	return 0;
-}
-
-static int rx_enable(SLMP_INFO * info, int enable)
-{
- 	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s rx_enable(%d)\n",
-			__FILE__,__LINE__,info->device_name,enable);
-
-	spin_lock_irqsave(&info->lock,flags);
-	if ( enable ) {
-		if ( !info->rx_enabled )
-			rx_start(info);
-	} else {
-		if ( info->rx_enabled )
-			rx_stop(info);
-	}
-	spin_unlock_irqrestore(&info->lock,flags);
-	return 0;
-}
-
-/* wait for specified event to occur
- */
-static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
-{
- 	unsigned long flags;
-	int s;
-	int rc=0;
-	struct mgsl_icount cprev, cnow;
-	int events;
-	int mask;
-	struct	_input_signal_events oldsigs, newsigs;
-	DECLARE_WAITQUEUE(wait, current);
-
-	COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
-	if (rc) {
-		return  -EFAULT;
-	}
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s wait_mgsl_event(%d)\n",
-			__FILE__,__LINE__,info->device_name,mask);
-
-	spin_lock_irqsave(&info->lock,flags);
-
-	/* return immediately if state matches requested events */
-	get_signals(info);
-	s = info->serial_signals;
-
-	events = mask &
-		( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
- 		  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
-		  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
-		  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
-	if (events) {
-		spin_unlock_irqrestore(&info->lock,flags);
-		goto exit;
-	}
-
-	/* save current irq counts */
-	cprev = info->icount;
-	oldsigs = info->input_signal_events;
-
-	/* enable hunt and idle irqs if needed */
-	if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
-		unsigned char oldval = info->ie1_value;
-		unsigned char newval = oldval +
-			 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
-			 (mask & MgslEvent_IdleReceived ? IDLD:0);
-		if ( oldval != newval ) {
-			info->ie1_value = newval;
-			write_reg(info, IE1, info->ie1_value);
-		}
-	}
-
-	set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(&info->event_wait_q, &wait);
-
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	for(;;) {
-		schedule();
-		if (signal_pending(current)) {
-			rc = -ERESTARTSYS;
-			break;
-		}
-
-		/* get current irq counts */
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		newsigs = info->input_signal_events;
-		set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&info->lock,flags);
-
-		/* if no change, wait aborted for some reason */
-		if (newsigs.dsr_up   == oldsigs.dsr_up   &&
-		    newsigs.dsr_down == oldsigs.dsr_down &&
-		    newsigs.dcd_up   == oldsigs.dcd_up   &&
-		    newsigs.dcd_down == oldsigs.dcd_down &&
-		    newsigs.cts_up   == oldsigs.cts_up   &&
-		    newsigs.cts_down == oldsigs.cts_down &&
-		    newsigs.ri_up    == oldsigs.ri_up    &&
-		    newsigs.ri_down  == oldsigs.ri_down  &&
-		    cnow.exithunt    == cprev.exithunt   &&
-		    cnow.rxidle      == cprev.rxidle) {
-			rc = -EIO;
-			break;
-		}
-
-		events = mask &
-			( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
-			  (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
-			  (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
-			  (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
-			  (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
-			  (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
-			  (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
-			  (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
-			  (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
-			  (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
-		if (events)
-			break;
-
-		cprev = cnow;
-		oldsigs = newsigs;
-	}
-
-	remove_wait_queue(&info->event_wait_q, &wait);
-	set_current_state(TASK_RUNNING);
-
-
-	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
-		spin_lock_irqsave(&info->lock,flags);
-		if (!waitqueue_active(&info->event_wait_q)) {
-			/* disable enable exit hunt mode/idle rcvd IRQs */
-			info->ie1_value &= ~(FLGD|IDLD);
-			write_reg(info, IE1, info->ie1_value);
-		}
-		spin_unlock_irqrestore(&info->lock,flags);
-	}
-exit:
-	if ( rc == 0 )
-		PUT_USER(rc, events, mask_ptr);
-
-	return rc;
-}
-
-static int modem_input_wait(SLMP_INFO *info,int arg)
-{
- 	unsigned long flags;
-	int rc;
-	struct mgsl_icount cprev, cnow;
-	DECLARE_WAITQUEUE(wait, current);
-
-	/* save current irq counts */
-	spin_lock_irqsave(&info->lock,flags);
-	cprev = info->icount;
-	add_wait_queue(&info->status_event_wait_q, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	for(;;) {
-		schedule();
-		if (signal_pending(current)) {
-			rc = -ERESTARTSYS;
-			break;
-		}
-
-		/* get new irq counts */
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&info->lock,flags);
-
-		/* if no change, wait aborted for some reason */
-		if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-		    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
-			rc = -EIO;
-			break;
-		}
-
-		/* check for change in caller specified modem input */
-		if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
-		    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
-		    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
-		    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
-			rc = 0;
-			break;
-		}
-
-		cprev = cnow;
-	}
-	remove_wait_queue(&info->status_event_wait_q, &wait);
-	set_current_state(TASK_RUNNING);
-	return rc;
-}
-
-/* return the state of the serial control and status signals
- */
-static int tiocmget(struct tty_struct *tty)
-{
-	SLMP_INFO *info = tty->driver_data;
-	unsigned int result;
- 	unsigned long flags;
-
-	spin_lock_irqsave(&info->lock,flags);
-	get_signals(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
-		 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) |
-		 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) |
-		 ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG : 0) |
-		 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) |
-		 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0);
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s tiocmget() value=%08X\n",
-			 __FILE__,__LINE__, info->device_name, result );
-	return result;
-}
-
-/* set modem control signals (DTR/RTS)
- */
-static int tiocmset(struct tty_struct *tty,
-					unsigned int set, unsigned int clear)
-{
-	SLMP_INFO *info = tty->driver_data;
- 	unsigned long flags;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s tiocmset(%x,%x)\n",
-			__FILE__,__LINE__,info->device_name, set, clear);
-
-	if (set & TIOCM_RTS)
-		info->serial_signals |= SerialSignal_RTS;
-	if (set & TIOCM_DTR)
-		info->serial_signals |= SerialSignal_DTR;
-	if (clear & TIOCM_RTS)
-		info->serial_signals &= ~SerialSignal_RTS;
-	if (clear & TIOCM_DTR)
-		info->serial_signals &= ~SerialSignal_DTR;
-
-	spin_lock_irqsave(&info->lock,flags);
-	set_signals(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	return 0;
-}
-
-static int carrier_raised(struct tty_port *port)
-{
-	SLMP_INFO *info = container_of(port, SLMP_INFO, port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->lock,flags);
-	get_signals(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
-}
-
-static void dtr_rts(struct tty_port *port, int on)
-{
-	SLMP_INFO *info = container_of(port, SLMP_INFO, port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->lock,flags);
-	if (on)
-		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
-	else
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-	set_signals(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-}
-
-/* Block the current process until the specified port is ready to open.
- */
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
-			   SLMP_INFO *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int		retval;
-	bool		do_clocal = false;
-	unsigned long	flags;
-	int		cd;
-	struct tty_port *port = &info->port;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s block_til_ready()\n",
-			 __FILE__,__LINE__, tty->driver->name );
-
-	if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
-		/* nonblock mode is set or port is not enabled */
-		/* just verify that callout device is not active */
-		tty_port_set_active(port, 1);
-		return 0;
-	}
-
-	if (C_CLOCAL(tty))
-		do_clocal = true;
-
-	/* Wait for carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, port->count is dropped by one, so that
-	 * close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-
-	retval = 0;
-	add_wait_queue(&port->open_wait, &wait);
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s block_til_ready() before block, count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, port->count );
-
-	spin_lock_irqsave(&info->lock, flags);
-	port->count--;
-	spin_unlock_irqrestore(&info->lock, flags);
-	port->blocked_open++;
-
-	while (1) {
-		if (C_BAUD(tty) && tty_port_initialized(port))
-			tty_port_raise_dtr_rts(port);
-
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		if (tty_hung_up_p(filp) || !tty_port_initialized(port)) {
-			retval = (port->flags & ASYNC_HUP_NOTIFY) ?
-					-EAGAIN : -ERESTARTSYS;
-			break;
-		}
-
-		cd = tty_port_carrier_raised(port);
-		if (do_clocal || cd)
-			break;
-
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-
-		if (debug_level >= DEBUG_LEVEL_INFO)
-			printk("%s(%d):%s block_til_ready() count=%d\n",
-				 __FILE__,__LINE__, tty->driver->name, port->count );
-
-		tty_unlock(tty);
-		schedule();
-		tty_lock(tty);
-	}
-
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		port->count++;
-	port->blocked_open--;
-
-	if (debug_level >= DEBUG_LEVEL_INFO)
-		printk("%s(%d):%s block_til_ready() after, count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, port->count );
-
-	if (!retval)
-		tty_port_set_active(port, 1);
-
-	return retval;
-}
-
-static int alloc_dma_bufs(SLMP_INFO *info)
-{
-	unsigned short BuffersPerFrame;
-	unsigned short BufferCount;
-
-	// Force allocation to start at 64K boundary for each port.
-	// This is necessary because *all* buffer descriptors for a port
-	// *must* be in the same 64K block. All descriptors on a port
-	// share a common 'base' address (upper 8 bits of 24 bits) programmed
-	// into the CBP register.
-	info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
-
-	/* Calculate the number of DMA buffers necessary to hold the */
-	/* largest allowable frame size. Note: If the max frame size is */
-	/* not an even multiple of the DMA buffer size then we need to */
-	/* round the buffer count per frame up one. */
-
-	BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
-	if ( info->max_frame_size % SCABUFSIZE )
-		BuffersPerFrame++;
-
-	/* calculate total number of data buffers (SCABUFSIZE) possible
-	 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
-	 * for the descriptor list (BUFFERLISTSIZE).
-	 */
-	BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
-
-	/* limit number of buffers to maximum amount of descriptors */
-	if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
-		BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
-
-	/* use enough buffers to transmit one max size frame */
-	info->tx_buf_count = BuffersPerFrame + 1;
-
-	/* never use more than half the available buffers for transmit */
-	if (info->tx_buf_count > (BufferCount/2))
-		info->tx_buf_count = BufferCount/2;
-
-	if (info->tx_buf_count > SCAMAXDESC)
-		info->tx_buf_count = SCAMAXDESC;
-
-	/* use remaining buffers for receive */
-	info->rx_buf_count = BufferCount - info->tx_buf_count;
-
-	if (info->rx_buf_count > SCAMAXDESC)
-		info->rx_buf_count = SCAMAXDESC;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
-			__FILE__,__LINE__, info->device_name,
-			info->tx_buf_count,info->rx_buf_count);
-
-	if ( alloc_buf_list( info ) < 0 ||
-		alloc_frame_bufs(info,
-		  			info->rx_buf_list,
-		  			info->rx_buf_list_ex,
-					info->rx_buf_count) < 0 ||
-		alloc_frame_bufs(info,
-					info->tx_buf_list,
-					info->tx_buf_list_ex,
-					info->tx_buf_count) < 0 ||
-		alloc_tmp_rx_buf(info) < 0 ) {
-		printk("%s(%d):%s Can't allocate DMA buffer memory\n",
-			__FILE__,__LINE__, info->device_name);
-		return -ENOMEM;
-	}
-
-	rx_reset_buffers( info );
-
-	return 0;
-}
-
-/* Allocate DMA buffers for the transmit and receive descriptor lists.
- */
-static int alloc_buf_list(SLMP_INFO *info)
-{
-	unsigned int i;
-
-	/* build list in adapter shared memory */
-	info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
-	info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
-	info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
-
-	memset(info->buffer_list, 0, BUFFERLISTSIZE);
-
-	/* Save virtual address pointers to the receive and */
-	/* transmit buffer lists. (Receive 1st). These pointers will */
-	/* be used by the processor to access the lists. */
-	info->rx_buf_list = (SCADESC *)info->buffer_list;
-
-	info->tx_buf_list = (SCADESC *)info->buffer_list;
-	info->tx_buf_list += info->rx_buf_count;
-
-	/* Build links for circular buffer entry lists (tx and rx)
-	 *
-	 * Note: links are physical addresses read by the SCA device
-	 * to determine the next buffer entry to use.
-	 */
-
-	for ( i = 0; i < info->rx_buf_count; i++ ) {
-		/* calculate and store physical address of this buffer entry */
-		info->rx_buf_list_ex[i].phys_entry =
-			info->buffer_list_phys + (i * SCABUFSIZE);
-
-		/* calculate and store physical address of */
-		/* next entry in cirular list of entries */
-		info->rx_buf_list[i].next = info->buffer_list_phys;
-		if ( i < info->rx_buf_count - 1 )
-			info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
-
-		info->rx_buf_list[i].length = SCABUFSIZE;
-	}
-
-	for ( i = 0; i < info->tx_buf_count; i++ ) {
-		/* calculate and store physical address of this buffer entry */
-		info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
-			((info->rx_buf_count + i) * sizeof(SCADESC));
-
-		/* calculate and store physical address of */
-		/* next entry in cirular list of entries */
-
-		info->tx_buf_list[i].next = info->buffer_list_phys +
-			info->rx_buf_count * sizeof(SCADESC);
-
-		if ( i < info->tx_buf_count - 1 )
-			info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
-	}
-
-	return 0;
-}
-
-/* Allocate the frame DMA buffers used by the specified buffer list.
- */
-static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
-{
-	int i;
-	unsigned long phys_addr;
-
-	for ( i = 0; i < count; i++ ) {
-		buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
-		phys_addr = info->port_array[0]->last_mem_alloc;
-		info->port_array[0]->last_mem_alloc += SCABUFSIZE;
-
-		buf_list[i].buf_ptr  = (unsigned short)phys_addr;
-		buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
-	}
-
-	return 0;
-}
-
-static void free_dma_bufs(SLMP_INFO *info)
-{
-	info->buffer_list = NULL;
-	info->rx_buf_list = NULL;
-	info->tx_buf_list = NULL;
-}
-
-/* allocate buffer large enough to hold max_frame_size.
- * This buffer is used to pass an assembled frame to the line discipline.
- */
-static int alloc_tmp_rx_buf(SLMP_INFO *info)
-{
-	info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
-	if (info->tmp_rx_buf == NULL)
-		return -ENOMEM;
-	/* unused flag buffer to satisfy receive_buf calling interface */
-	info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
-	if (!info->flag_buf) {
-		kfree(info->tmp_rx_buf);
-		info->tmp_rx_buf = NULL;
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-static void free_tmp_rx_buf(SLMP_INFO *info)
-{
-	kfree(info->tmp_rx_buf);
-	info->tmp_rx_buf = NULL;
-	kfree(info->flag_buf);
-	info->flag_buf = NULL;
-}
-
-static int claim_resources(SLMP_INFO *info)
-{
-	if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
-		printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_memory_base);
-		info->init_error = DiagStatus_AddressConflict;
-		goto errout;
-	}
-	else
-		info->shared_mem_requested = true;
-
-	if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
-		printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_lcr_base);
-		info->init_error = DiagStatus_AddressConflict;
-		goto errout;
-	}
-	else
-		info->lcr_mem_requested = true;
-
-	if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
-		printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_sca_base);
-		info->init_error = DiagStatus_AddressConflict;
-		goto errout;
-	}
-	else
-		info->sca_base_requested = true;
-
-	if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
-		printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
-		info->init_error = DiagStatus_AddressConflict;
-		goto errout;
-	}
-	else
-		info->sca_statctrl_requested = true;
-
-	info->memory_base = ioremap(info->phys_memory_base,
-								SCA_MEM_SIZE);
-	if (!info->memory_base) {
-		printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
-		info->init_error = DiagStatus_CantAssignPciResources;
-		goto errout;
-	}
-
-	info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE);
-	if (!info->lcr_base) {
-		printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
-		info->init_error = DiagStatus_CantAssignPciResources;
-		goto errout;
-	}
-	info->lcr_base += info->lcr_offset;
-
-	info->sca_base = ioremap(info->phys_sca_base, PAGE_SIZE);
-	if (!info->sca_base) {
-		printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_sca_base );
-		info->init_error = DiagStatus_CantAssignPciResources;
-		goto errout;
-	}
-	info->sca_base += info->sca_offset;
-
-	info->statctrl_base = ioremap(info->phys_statctrl_base,
-								PAGE_SIZE);
-	if (!info->statctrl_base) {
-		printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
-		info->init_error = DiagStatus_CantAssignPciResources;
-		goto errout;
-	}
-	info->statctrl_base += info->statctrl_offset;
-
-	if ( !memory_test(info) ) {
-		printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
-			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
-		info->init_error = DiagStatus_MemoryError;
-		goto errout;
-	}
-
-	return 0;
-
-errout:
-	release_resources( info );
-	return -ENODEV;
-}
-
-static void release_resources(SLMP_INFO *info)
-{
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):%s release_resources() entry\n",
-			__FILE__,__LINE__,info->device_name );
-
-	if ( info->irq_requested ) {
-		free_irq(info->irq_level, info);
-		info->irq_requested = false;
-	}
-
-	if ( info->shared_mem_requested ) {
-		release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
-		info->shared_mem_requested = false;
-	}
-	if ( info->lcr_mem_requested ) {
-		release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
-		info->lcr_mem_requested = false;
-	}
-	if ( info->sca_base_requested ) {
-		release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
-		info->sca_base_requested = false;
-	}
-	if ( info->sca_statctrl_requested ) {
-		release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
-		info->sca_statctrl_requested = false;
-	}
-
-	if (info->memory_base){
-		iounmap(info->memory_base);
-		info->memory_base = NULL;
-	}
-
-	if (info->sca_base) {
-		iounmap(info->sca_base - info->sca_offset);
-		info->sca_base=NULL;
-	}
-
-	if (info->statctrl_base) {
-		iounmap(info->statctrl_base - info->statctrl_offset);
-		info->statctrl_base=NULL;
-	}
-
-	if (info->lcr_base){
-		iounmap(info->lcr_base - info->lcr_offset);
-		info->lcr_base = NULL;
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):%s release_resources() exit\n",
-			__FILE__,__LINE__,info->device_name );
-}
-
-/* Add the specified device instance data structure to the
- * global linked list of devices and increment the device count.
- */
-static int add_device(SLMP_INFO *info)
-{
-	info->next_device = NULL;
-	info->line = synclinkmp_device_count;
-	sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
-
-	if (info->line < MAX_DEVICES) {
-		if (maxframe[info->line])
-			info->max_frame_size = maxframe[info->line];
-	}
-
-	synclinkmp_device_count++;
-
-	if ( !synclinkmp_device_list )
-		synclinkmp_device_list = info;
-	else {
-		SLMP_INFO *current_dev = synclinkmp_device_list;
-		while( current_dev->next_device )
-			current_dev = current_dev->next_device;
-		current_dev->next_device = info;
-	}
-
-	if ( info->max_frame_size < 4096 )
-		info->max_frame_size = 4096;
-	else if ( info->max_frame_size > 65535 )
-		info->max_frame_size = 65535;
-
-	printk( "SyncLink MultiPort %s: "
-		"Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
-		info->device_name,
-		info->phys_sca_base,
-		info->phys_memory_base,
-		info->phys_statctrl_base,
-		info->phys_lcr_base,
-		info->irq_level,
-		info->max_frame_size );
-
-#if SYNCLINK_GENERIC_HDLC
-	return hdlcdev_init(info);
-#else
-	return 0;
-#endif
-}
-
-static const struct tty_port_operations port_ops = {
-	.carrier_raised = carrier_raised,
-	.dtr_rts = dtr_rts,
-};
-
-/* Allocate and initialize a device instance structure
- *
- * Return Value:	pointer to SLMP_INFO if success, otherwise NULL
- */
-static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
-{
-	SLMP_INFO *info;
-
-	info = kzalloc(sizeof(SLMP_INFO),
-		 GFP_KERNEL);
-
-	if (!info) {
-		printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
-			__FILE__,__LINE__, adapter_num, port_num);
-	} else {
-		tty_port_init(&info->port);
-		info->port.ops = &port_ops;
-		info->magic = MGSL_MAGIC;
-		INIT_WORK(&info->task, bh_handler);
-		info->max_frame_size = 4096;
-		info->port.close_delay = 5*HZ/10;
-		info->port.closing_wait = 30*HZ;
-		init_waitqueue_head(&info->status_event_wait_q);
-		init_waitqueue_head(&info->event_wait_q);
-		spin_lock_init(&info->netlock);
-		memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
-		info->idle_mode = HDLC_TXIDLE_FLAGS;
-		info->adapter_num = adapter_num;
-		info->port_num = port_num;
-
-		/* Copy configuration info to device instance data */
-		info->irq_level = pdev->irq;
-		info->phys_lcr_base = pci_resource_start(pdev,0);
-		info->phys_sca_base = pci_resource_start(pdev,2);
-		info->phys_memory_base = pci_resource_start(pdev,3);
-		info->phys_statctrl_base = pci_resource_start(pdev,4);
-
-		/* Because veremap only works on page boundaries we must map
-		 * a larger area than is actually implemented for the LCR
-		 * memory range. We map a full page starting at the page boundary.
-		 */
-		info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
-		info->phys_lcr_base &= ~(PAGE_SIZE-1);
-
-		info->sca_offset    = info->phys_sca_base & (PAGE_SIZE-1);
-		info->phys_sca_base &= ~(PAGE_SIZE-1);
-
-		info->statctrl_offset    = info->phys_statctrl_base & (PAGE_SIZE-1);
-		info->phys_statctrl_base &= ~(PAGE_SIZE-1);
-
-		info->bus_type = MGSL_BUS_TYPE_PCI;
-		info->irq_flags = IRQF_SHARED;
-
-		timer_setup(&info->tx_timer, tx_timeout, 0);
-		timer_setup(&info->status_timer, status_timeout, 0);
-
-		/* Store the PCI9050 misc control register value because a flaw
-		 * in the PCI9050 prevents LCR registers from being read if
-		 * BIOS assigns an LCR base address with bit 7 set.
-		 *
-		 * Only the misc control register is accessed for which only
-		 * write access is needed, so set an initial value and change
-		 * bits to the device instance data as we write the value
-		 * to the actual misc control register.
-		 */
-		info->misc_ctrl_value = 0x087e4546;
-
-		/* initial port state is unknown - if startup errors
-		 * occur, init_error will be set to indicate the
-		 * problem. Once the port is fully initialized,
-		 * this value will be set to 0 to indicate the
-		 * port is available.
-		 */
-		info->init_error = -1;
-	}
-
-	return info;
-}
-
-static int device_init(int adapter_num, struct pci_dev *pdev)
-{
-	SLMP_INFO *port_array[SCA_MAX_PORTS];
-	int port, rc;
-
-	/* allocate device instances for up to SCA_MAX_PORTS devices */
-	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
-		port_array[port] = alloc_dev(adapter_num,port,pdev);
-		if( port_array[port] == NULL ) {
-			for (--port; port >= 0; --port) {
-				tty_port_destroy(&port_array[port]->port);
-				kfree(port_array[port]);
-			}
-			return -ENOMEM;
-		}
-	}
-
-	/* give copy of port_array to all ports and add to device list  */
-	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
-		memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
-		rc = add_device( port_array[port] );
-		if (rc)
-			goto err_add;
-		spin_lock_init(&port_array[port]->lock);
-	}
-
-	/* Allocate and claim adapter resources */
-	if ( !claim_resources(port_array[0]) ) {
-
-		alloc_dma_bufs(port_array[0]);
-
-		/* copy resource information from first port to others */
-		for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
-			port_array[port]->lock  = port_array[0]->lock;
-			port_array[port]->irq_level     = port_array[0]->irq_level;
-			port_array[port]->memory_base   = port_array[0]->memory_base;
-			port_array[port]->sca_base      = port_array[0]->sca_base;
-			port_array[port]->statctrl_base = port_array[0]->statctrl_base;
-			port_array[port]->lcr_base      = port_array[0]->lcr_base;
-			alloc_dma_bufs(port_array[port]);
-		}
-
-		rc = request_irq(port_array[0]->irq_level,
-					synclinkmp_interrupt,
-					port_array[0]->irq_flags,
-					port_array[0]->device_name,
-					port_array[0]);
-		if ( rc ) {
-			printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
-				__FILE__,__LINE__,
-				port_array[0]->device_name,
-				port_array[0]->irq_level );
-			goto err_irq;
-		}
-		port_array[0]->irq_requested = true;
-		adapter_test(port_array[0]);
-	}
-	return 0;
-err_irq:
-	release_resources( port_array[0] );
-err_add:
-	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
-		tty_port_destroy(&port_array[port]->port);
-		kfree(port_array[port]);
-	}
-	return rc;
-}
-
-static const struct tty_operations ops = {
-	.install = install,
-	.open = open,
-	.close = close,
-	.write = write,
-	.put_char = put_char,
-	.flush_chars = flush_chars,
-	.write_room = write_room,
-	.chars_in_buffer = chars_in_buffer,
-	.flush_buffer = flush_buffer,
-	.ioctl = ioctl,
-	.throttle = throttle,
-	.unthrottle = unthrottle,
-	.send_xchar = send_xchar,
-	.break_ctl = set_break,
-	.wait_until_sent = wait_until_sent,
-	.set_termios = set_termios,
-	.stop = tx_hold,
-	.start = tx_release,
-	.hangup = hangup,
-	.tiocmget = tiocmget,
-	.tiocmset = tiocmset,
-	.get_icount = get_icount,
-	.proc_show = synclinkmp_proc_show,
-};
-
-
-static void synclinkmp_cleanup(void)
-{
-	int rc;
-	SLMP_INFO *info;
-	SLMP_INFO *tmp;
-
-	printk("Unloading %s %s\n", driver_name, driver_version);
-
-	if (serial_driver) {
-		rc = tty_unregister_driver(serial_driver);
-		if (rc)
-			printk("%s(%d) failed to unregister tty driver err=%d\n",
-			       __FILE__,__LINE__,rc);
-		put_tty_driver(serial_driver);
-	}
-
-	/* reset devices */
-	info = synclinkmp_device_list;
-	while(info) {
-		reset_port(info);
-		info = info->next_device;
-	}
-
-	/* release devices */
-	info = synclinkmp_device_list;
-	while(info) {
-#if SYNCLINK_GENERIC_HDLC
-		hdlcdev_exit(info);
-#endif
-		free_dma_bufs(info);
-		free_tmp_rx_buf(info);
-		if ( info->port_num == 0 ) {
-			if (info->sca_base)
-				write_reg(info, LPR, 1); /* set low power mode */
-			release_resources(info);
-		}
-		tmp = info;
-		info = info->next_device;
-		tty_port_destroy(&tmp->port);
-		kfree(tmp);
-	}
-
-	pci_unregister_driver(&synclinkmp_pci_driver);
-}
-
-/* Driver initialization entry point.
- */
-
-static int __init synclinkmp_init(void)
-{
-	int rc;
-
-	if (break_on_load) {
-	 	synclinkmp_get_text_ptr();
-  		BREAKPOINT();
-	}
-
- 	printk("%s %s\n", driver_name, driver_version);
-
-	if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
-		printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
-		return rc;
-	}
-
-	serial_driver = alloc_tty_driver(128);
-	if (!serial_driver) {
-		rc = -ENOMEM;
-		goto error;
-	}
-
-	/* Initialize the tty_driver structure */
-
-	serial_driver->driver_name = "synclinkmp";
-	serial_driver->name = "ttySLM";
-	serial_driver->major = ttymajor;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->init_termios.c_ispeed = 9600;
-	serial_driver->init_termios.c_ospeed = 9600;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(serial_driver, &ops);
-	if ((rc = tty_register_driver(serial_driver)) < 0) {
-		printk("%s(%d):Couldn't register serial driver\n",
-			__FILE__,__LINE__);
-		put_tty_driver(serial_driver);
-		serial_driver = NULL;
-		goto error;
-	}
-
- 	printk("%s %s, tty major#%d\n",
-		driver_name, driver_version,
-		serial_driver->major);
-
-	return 0;
-
-error:
-	synclinkmp_cleanup();
-	return rc;
-}
-
-static void __exit synclinkmp_exit(void)
-{
-	synclinkmp_cleanup();
-}
-
-module_init(synclinkmp_init);
-module_exit(synclinkmp_exit);
-
-/* Set the port for internal loopback mode.
- * The TxCLK and RxCLK signals are generated from the BRG and
- * the TxD is looped back to the RxD internally.
- */
-static void enable_loopback(SLMP_INFO *info, int enable)
-{
-	if (enable) {
-		/* MD2 (Mode Register 2)
-		 * 01..00  CNCT<1..0> Channel Connection 11=Local Loopback
-		 */
-		write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
-
-		/* degate external TxC clock source */
-		info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
-		write_control_reg(info);
-
-		/* RXS/TXS (Rx/Tx clock source)
-		 * 07      Reserved, must be 0
-		 * 06..04  Clock Source, 100=BRG
-		 * 03..00  Clock Divisor, 0000=1
-		 */
-		write_reg(info, RXS, 0x40);
-		write_reg(info, TXS, 0x40);
-
-	} else {
-		/* MD2 (Mode Register 2)
-	 	 * 01..00  CNCT<1..0> Channel connection, 0=normal
-		 */
-		write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
-
-		/* RXS/TXS (Rx/Tx clock source)
-		 * 07      Reserved, must be 0
-		 * 06..04  Clock Source, 000=RxC/TxC Pin
-		 * 03..00  Clock Divisor, 0000=1
-		 */
-		write_reg(info, RXS, 0x00);
-		write_reg(info, TXS, 0x00);
-	}
-
-	/* set LinkSpeed if available, otherwise default to 2Mbps */
-	if (info->params.clock_speed)
-		set_rate(info, info->params.clock_speed);
-	else
-		set_rate(info, 3686400);
-}
-
-/* Set the baud rate register to the desired speed
- *
- *	data_rate	data rate of clock in bits per second
- *			A data rate of 0 disables the AUX clock.
- */
-static void set_rate( SLMP_INFO *info, u32 data_rate )
-{
-       	u32 TMCValue;
-       	unsigned char BRValue;
-	u32 Divisor=0;
-
-	/* fBRG = fCLK/(TMC * 2^BR)
-	 */
-	if (data_rate != 0) {
-		Divisor = 14745600/data_rate;
-		if (!Divisor)
-			Divisor = 1;
-
-		TMCValue = Divisor;
-
-		BRValue = 0;
-		if (TMCValue != 1 && TMCValue != 2) {
-			/* BRValue of 0 provides 50/50 duty cycle *only* when
-			 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
-			 * 50/50 duty cycle.
-			 */
-			BRValue = 1;
-			TMCValue >>= 1;
-		}
-
-		/* while TMCValue is too big for TMC register, divide
-		 * by 2 and increment BR exponent.
-		 */
-		for(; TMCValue > 256 && BRValue < 10; BRValue++)
-			TMCValue >>= 1;
-
-		write_reg(info, TXS,
-			(unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
-		write_reg(info, RXS,
-			(unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
-		write_reg(info, TMC, (unsigned char)TMCValue);
-	}
-	else {
-		write_reg(info, TXS,0);
-		write_reg(info, RXS,0);
-		write_reg(info, TMC, 0);
-	}
-}
-
-/* Disable receiver
- */
-static void rx_stop(SLMP_INFO *info)
-{
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):%s rx_stop()\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	write_reg(info, CMD, RXRESET);
-
-	info->ie0_value &= ~RXRDYE;
-	write_reg(info, IE0, info->ie0_value);	/* disable Rx data interrupts */
-
-	write_reg(info, RXDMA + DSR, 0);	/* disable Rx DMA */
-	write_reg(info, RXDMA + DCMD, SWABORT);	/* reset/init Rx DMA */
-	write_reg(info, RXDMA + DIR, 0);	/* disable Rx DMA interrupts */
-
-	info->rx_enabled = false;
-	info->rx_overflow = false;
-}
-
-/* enable the receiver
- */
-static void rx_start(SLMP_INFO *info)
-{
-	int i;
-
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):%s rx_start()\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	write_reg(info, CMD, RXRESET);
-
-	if ( info->params.mode == MGSL_MODE_HDLC ) {
-		/* HDLC, disabe IRQ on rxdata */
-		info->ie0_value &= ~RXRDYE;
-		write_reg(info, IE0, info->ie0_value);
-
-		/* Reset all Rx DMA buffers and program rx dma */
-		write_reg(info, RXDMA + DSR, 0);		/* disable Rx DMA */
-		write_reg(info, RXDMA + DCMD, SWABORT);	/* reset/init Rx DMA */
-
-		for (i = 0; i < info->rx_buf_count; i++) {
-			info->rx_buf_list[i].status = 0xff;
-
-			// throttle to 4 shared memory writes at a time to prevent
-			// hogging local bus (keep latency time for DMA requests low).
-			if (!(i % 4))
-				read_status_reg(info);
-		}
-		info->current_rx_buf = 0;
-
-		/* set current/1st descriptor address */
-		write_reg16(info, RXDMA + CDA,
-			info->rx_buf_list_ex[0].phys_entry);
-
-		/* set new last rx descriptor address */
-		write_reg16(info, RXDMA + EDA,
-			info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
-
-		/* set buffer length (shared by all rx dma data buffers) */
-		write_reg16(info, RXDMA + BFL, SCABUFSIZE);
-
-		write_reg(info, RXDMA + DIR, 0x60);	/* enable Rx DMA interrupts (EOM/BOF) */
-		write_reg(info, RXDMA + DSR, 0xf2);	/* clear Rx DMA IRQs, enable Rx DMA */
-	} else {
-		/* async, enable IRQ on rxdata */
-		info->ie0_value |= RXRDYE;
-		write_reg(info, IE0, info->ie0_value);
-	}
-
-	write_reg(info, CMD, RXENABLE);
-
-	info->rx_overflow = false;
-	info->rx_enabled = true;
-}
-
-/* Enable the transmitter and send a transmit frame if
- * one is loaded in the DMA buffers.
- */
-static void tx_start(SLMP_INFO *info)
-{
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):%s tx_start() tx_count=%d\n",
-			 __FILE__,__LINE__, info->device_name,info->tx_count );
-
-	if (!info->tx_enabled ) {
-		write_reg(info, CMD, TXRESET);
-		write_reg(info, CMD, TXENABLE);
-		info->tx_enabled = true;
-	}
-
-	if ( info->tx_count ) {
-
-		/* If auto RTS enabled and RTS is inactive, then assert */
-		/* RTS and set a flag indicating that the driver should */
-		/* negate RTS when the transmission completes. */
-
-		info->drop_rts_on_tx_done = false;
-
-		if (info->params.mode != MGSL_MODE_ASYNC) {
-
-			if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
-				get_signals( info );
-				if ( !(info->serial_signals & SerialSignal_RTS) ) {
-					info->serial_signals |= SerialSignal_RTS;
-					set_signals( info );
-					info->drop_rts_on_tx_done = true;
-				}
-			}
-
-			write_reg16(info, TRC0,
-				(unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
-
-			write_reg(info, TXDMA + DSR, 0); 		/* disable DMA channel */
-			write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
-	
-			/* set TX CDA (current descriptor address) */
-			write_reg16(info, TXDMA + CDA,
-				info->tx_buf_list_ex[0].phys_entry);
-	
-			/* set TX EDA (last descriptor address) */
-			write_reg16(info, TXDMA + EDA,
-				info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
-	
-			/* enable underrun IRQ */
-			info->ie1_value &= ~IDLE;
-			info->ie1_value |= UDRN;
-			write_reg(info, IE1, info->ie1_value);
-			write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
-	
-			write_reg(info, TXDMA + DIR, 0x40);		/* enable Tx DMA interrupts (EOM) */
-			write_reg(info, TXDMA + DSR, 0xf2);		/* clear Tx DMA IRQs, enable Tx DMA */
-	
-			mod_timer(&info->tx_timer, jiffies +
-					msecs_to_jiffies(5000));
-		}
-		else {
-			tx_load_fifo(info);
-			/* async, enable IRQ on txdata */
-			info->ie0_value |= TXRDYE;
-			write_reg(info, IE0, info->ie0_value);
-		}
-
-		info->tx_active = true;
-	}
-}
-
-/* stop the transmitter and DMA
- */
-static void tx_stop( SLMP_INFO *info )
-{
-	if (debug_level >= DEBUG_LEVEL_ISR)
-		printk("%s(%d):%s tx_stop()\n",
-			 __FILE__,__LINE__, info->device_name );
-
-	del_timer(&info->tx_timer);
-
-	write_reg(info, TXDMA + DSR, 0);		/* disable DMA channel */
-	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
-
-	write_reg(info, CMD, TXRESET);
-
-	info->ie1_value &= ~(UDRN + IDLE);
-	write_reg(info, IE1, info->ie1_value);	/* disable tx status interrupts */
-	write_reg(info, SR1, (unsigned char)(IDLE + UDRN));	/* clear pending */
-
-	info->ie0_value &= ~TXRDYE;
-	write_reg(info, IE0, info->ie0_value);	/* disable tx data interrupts */
-
-	info->tx_enabled = false;
-	info->tx_active = false;
-}
-
-/* Fill the transmit FIFO until the FIFO is full or
- * there is no more data to load.
- */
-static void tx_load_fifo(SLMP_INFO *info)
-{
-	u8 TwoBytes[2];
-
-	/* do nothing is now tx data available and no XON/XOFF pending */
-
-	if ( !info->tx_count && !info->x_char )
-		return;
-
-	/* load the Transmit FIFO until FIFOs full or all data sent */
-
-	while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
-
-		/* there is more space in the transmit FIFO and */
-		/* there is more data in transmit buffer */
-
-		if ( (info->tx_count > 1) && !info->x_char ) {
- 			/* write 16-bits */
-			TwoBytes[0] = info->tx_buf[info->tx_get++];
-			if (info->tx_get >= info->max_frame_size)
-				info->tx_get -= info->max_frame_size;
-			TwoBytes[1] = info->tx_buf[info->tx_get++];
-			if (info->tx_get >= info->max_frame_size)
-				info->tx_get -= info->max_frame_size;
-
-			write_reg16(info, TRB, *((u16 *)TwoBytes));
-
-			info->tx_count -= 2;
-			info->icount.tx += 2;
-		} else {
-			/* only 1 byte left to transmit or 1 FIFO slot left */
-
-			if (info->x_char) {
-				/* transmit pending high priority char */
-				write_reg(info, TRB, info->x_char);
-				info->x_char = 0;
-			} else {
-				write_reg(info, TRB, info->tx_buf[info->tx_get++]);
-				if (info->tx_get >= info->max_frame_size)
-					info->tx_get -= info->max_frame_size;
-				info->tx_count--;
-			}
-			info->icount.tx++;
-		}
-	}
-}
-
-/* Reset a port to a known state
- */
-static void reset_port(SLMP_INFO *info)
-{
-	if (info->sca_base) {
-
-		tx_stop(info);
-		rx_stop(info);
-
-		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-		set_signals(info);
-
-		/* disable all port interrupts */
-		info->ie0_value = 0;
-		info->ie1_value = 0;
-		info->ie2_value = 0;
-		write_reg(info, IE0, info->ie0_value);
-		write_reg(info, IE1, info->ie1_value);
-		write_reg(info, IE2, info->ie2_value);
-
-		write_reg(info, CMD, CHRESET);
-	}
-}
-
-/* Reset all the ports to a known state.
- */
-static void reset_adapter(SLMP_INFO *info)
-{
-	int i;
-
-	for ( i=0; i < SCA_MAX_PORTS; ++i) {
-		if (info->port_array[i])
-			reset_port(info->port_array[i]);
-	}
-}
-
-/* Program port for asynchronous communications.
- */
-static void async_mode(SLMP_INFO *info)
-{
-
-  	unsigned char RegValue;
-
-	tx_stop(info);
-	rx_stop(info);
-
-	/* MD0, Mode Register 0
-	 *
-	 * 07..05  PRCTL<2..0>, Protocol Mode, 000=async
-	 * 04      AUTO, Auto-enable (RTS/CTS/DCD)
-	 * 03      Reserved, must be 0
-	 * 02      CRCCC, CRC Calculation, 0=disabled
-	 * 01..00  STOP<1..0> Stop bits (00=1,10=2)
-	 *
-	 * 0000 0000
-	 */
-	RegValue = 0x00;
-	if (info->params.stop_bits != 1)
-		RegValue |= BIT1;
-	write_reg(info, MD0, RegValue);
-
-	/* MD1, Mode Register 1
-	 *
-	 * 07..06  BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
-	 * 05..04  TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
-	 * 03..02  RXCHR<1..0>, rx char size
-	 * 01..00  PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
-	 *
-	 * 0100 0000
-	 */
-	RegValue = 0x40;
-	switch (info->params.data_bits) {
-	case 7: RegValue |= BIT4 + BIT2; break;
-	case 6: RegValue |= BIT5 + BIT3; break;
-	case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
-	}
-	if (info->params.parity != ASYNC_PARITY_NONE) {
-		RegValue |= BIT1;
-		if (info->params.parity == ASYNC_PARITY_ODD)
-			RegValue |= BIT0;
-	}
-	write_reg(info, MD1, RegValue);
-
-	/* MD2, Mode Register 2
-	 *
-	 * 07..02  Reserved, must be 0
-	 * 01..00  CNCT<1..0> Channel connection, 00=normal 11=local loopback
-	 *
-	 * 0000 0000
-	 */
-	RegValue = 0x00;
-	if (info->params.loopback)
-		RegValue |= (BIT1 + BIT0);
-	write_reg(info, MD2, RegValue);
-
-	/* RXS, Receive clock source
-	 *
-	 * 07      Reserved, must be 0
-	 * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
-	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
-	 */
-	RegValue=BIT6;
-	write_reg(info, RXS, RegValue);
-
-	/* TXS, Transmit clock source
-	 *
-	 * 07      Reserved, must be 0
-	 * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
-	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
-	 */
-	RegValue=BIT6;
-	write_reg(info, TXS, RegValue);
-
-	/* Control Register
-	 *
-	 * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
-	 */
-	info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
-	write_control_reg(info);
-
-	tx_set_idle(info);
-
-	/* RRC Receive Ready Control 0
-	 *
-	 * 07..05  Reserved, must be 0
-	 * 04..00  RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
-	 */
-	write_reg(info, RRC, 0x00);
-
-	/* TRC0 Transmit Ready Control 0
-	 *
-	 * 07..05  Reserved, must be 0
-	 * 04..00  TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
-	 */
-	write_reg(info, TRC0, 0x10);
-
-	/* TRC1 Transmit Ready Control 1
-	 *
-	 * 07..05  Reserved, must be 0
-	 * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
-	 */
-	write_reg(info, TRC1, 0x1e);
-
-	/* CTL, MSCI control register
-	 *
-	 * 07..06  Reserved, set to 0
-	 * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
-	 * 04      IDLC, idle control, 0=mark 1=idle register
-	 * 03      BRK, break, 0=off 1 =on (async)
-	 * 02      SYNCLD, sync char load enable (BSC) 1=enabled
-	 * 01      GOP, go active on poll (LOOP mode) 1=enabled
-	 * 00      RTS, RTS output control, 0=active 1=inactive
-	 *
-	 * 0001 0001
-	 */
-	RegValue = 0x10;
-	if (!(info->serial_signals & SerialSignal_RTS))
-		RegValue |= 0x01;
-	write_reg(info, CTL, RegValue);
-
-	/* enable status interrupts */
-	info->ie0_value |= TXINTE + RXINTE;
-	write_reg(info, IE0, info->ie0_value);
-
-	/* enable break detect interrupt */
-	info->ie1_value = BRKD;
-	write_reg(info, IE1, info->ie1_value);
-
-	/* enable rx overrun interrupt */
-	info->ie2_value = OVRN;
-	write_reg(info, IE2, info->ie2_value);
-
-	set_rate( info, info->params.data_rate * 16 );
-}
-
-/* Program the SCA for HDLC communications.
- */
-static void hdlc_mode(SLMP_INFO *info)
-{
-	unsigned char RegValue;
-	u32 DpllDivisor;
-
-	// Can't use DPLL because SCA outputs recovered clock on RxC when
-	// DPLL mode selected. This causes output contention with RxC receiver.
-	// Use of DPLL would require external hardware to disable RxC receiver
-	// when DPLL mode selected.
-	info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
-
-	/* disable DMA interrupts */
-	write_reg(info, TXDMA + DIR, 0);
-	write_reg(info, RXDMA + DIR, 0);
-
-	/* MD0, Mode Register 0
-	 *
-	 * 07..05  PRCTL<2..0>, Protocol Mode, 100=HDLC
-	 * 04      AUTO, Auto-enable (RTS/CTS/DCD)
-	 * 03      Reserved, must be 0
-	 * 02      CRCCC, CRC Calculation, 1=enabled
-	 * 01      CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
-	 * 00      CRC0, CRC initial value, 1 = all 1s
-	 *
-	 * 1000 0001
-	 */
-	RegValue = 0x81;
-	if (info->params.flags & HDLC_FLAG_AUTO_CTS)
-		RegValue |= BIT4;
-	if (info->params.flags & HDLC_FLAG_AUTO_DCD)
-		RegValue |= BIT4;
-	if (info->params.crc_type == HDLC_CRC_16_CCITT)
-		RegValue |= BIT2 + BIT1;
-	write_reg(info, MD0, RegValue);
-
-	/* MD1, Mode Register 1
-	 *
-	 * 07..06  ADDRS<1..0>, Address detect, 00=no addr check
-	 * 05..04  TXCHR<1..0>, tx char size, 00=8 bits
-	 * 03..02  RXCHR<1..0>, rx char size, 00=8 bits
-	 * 01..00  PMPM<1..0>, Parity mode, 00=no parity
-	 *
-	 * 0000 0000
-	 */
-	RegValue = 0x00;
-	write_reg(info, MD1, RegValue);
-
-	/* MD2, Mode Register 2
-	 *
-	 * 07      NRZFM, 0=NRZ, 1=FM
-	 * 06..05  CODE<1..0> Encoding, 00=NRZ
-	 * 04..03  DRATE<1..0> DPLL Divisor, 00=8
-	 * 02      Reserved, must be 0
-	 * 01..00  CNCT<1..0> Channel connection, 0=normal
-	 *
-	 * 0000 0000
-	 */
-	RegValue = 0x00;
-	switch(info->params.encoding) {
-	case HDLC_ENCODING_NRZI:	  RegValue |= BIT5; break;
-	case HDLC_ENCODING_BIPHASE_MARK:  RegValue |= BIT7 + BIT5; break; /* aka FM1 */
-	case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
-	case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; 	/* aka Manchester */
-#if 0
-	case HDLC_ENCODING_NRZB:	       				/* not supported */
-	case HDLC_ENCODING_NRZI_MARK:          				/* not supported */
-	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: 				/* not supported */
-#endif
-	}
-	if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
-		DpllDivisor = 16;
-		RegValue |= BIT3;
-	} else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
-		DpllDivisor = 8;
-	} else {
-		DpllDivisor = 32;
-		RegValue |= BIT4;
-	}
-	write_reg(info, MD2, RegValue);
-
-
-	/* RXS, Receive clock source
-	 *
-	 * 07      Reserved, must be 0
-	 * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
-	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
-	 */
-	RegValue=0;
-	if (info->params.flags & HDLC_FLAG_RXC_BRG)
-		RegValue |= BIT6;
-	if (info->params.flags & HDLC_FLAG_RXC_DPLL)
-		RegValue |= BIT6 + BIT5;
-	write_reg(info, RXS, RegValue);
-
-	/* TXS, Transmit clock source
-	 *
-	 * 07      Reserved, must be 0
-	 * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
-	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
-	 */
-	RegValue=0;
-	if (info->params.flags & HDLC_FLAG_TXC_BRG)
-		RegValue |= BIT6;
-	if (info->params.flags & HDLC_FLAG_TXC_DPLL)
-		RegValue |= BIT6 + BIT5;
-	write_reg(info, TXS, RegValue);
-
-	if (info->params.flags & HDLC_FLAG_RXC_DPLL)
-		set_rate(info, info->params.clock_speed * DpllDivisor);
-	else
-		set_rate(info, info->params.clock_speed);
-
-	/* GPDATA (General Purpose I/O Data Register)
-	 *
-	 * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
-	 */
-	if (info->params.flags & HDLC_FLAG_TXC_BRG)
-		info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
-	else
-		info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
-	write_control_reg(info);
-
-	/* RRC Receive Ready Control 0
-	 *
-	 * 07..05  Reserved, must be 0
-	 * 04..00  RRC<4..0> Rx FIFO trigger active
-	 */
-	write_reg(info, RRC, rx_active_fifo_level);
-
-	/* TRC0 Transmit Ready Control 0
-	 *
-	 * 07..05  Reserved, must be 0
-	 * 04..00  TRC<4..0> Tx FIFO trigger active
-	 */
-	write_reg(info, TRC0, tx_active_fifo_level);
-
-	/* TRC1 Transmit Ready Control 1
-	 *
-	 * 07..05  Reserved, must be 0
-	 * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
-	 */
-	write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
-
-	/* DMR, DMA Mode Register
-	 *
-	 * 07..05  Reserved, must be 0
-	 * 04      TMOD, Transfer Mode: 1=chained-block
-	 * 03      Reserved, must be 0
-	 * 02      NF, Number of Frames: 1=multi-frame
-	 * 01      CNTE, Frame End IRQ Counter enable: 0=disabled
-	 * 00      Reserved, must be 0
-	 *
-	 * 0001 0100
-	 */
-	write_reg(info, TXDMA + DMR, 0x14);
-	write_reg(info, RXDMA + DMR, 0x14);
-
-	/* Set chain pointer base (upper 8 bits of 24 bit addr) */
-	write_reg(info, RXDMA + CPB,
-		(unsigned char)(info->buffer_list_phys >> 16));
-
-	/* Set chain pointer base (upper 8 bits of 24 bit addr) */
-	write_reg(info, TXDMA + CPB,
-		(unsigned char)(info->buffer_list_phys >> 16));
-
-	/* enable status interrupts. other code enables/disables
-	 * the individual sources for these two interrupt classes.
-	 */
-	info->ie0_value |= TXINTE + RXINTE;
-	write_reg(info, IE0, info->ie0_value);
-
-	/* CTL, MSCI control register
-	 *
-	 * 07..06  Reserved, set to 0
-	 * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
-	 * 04      IDLC, idle control, 0=mark 1=idle register
-	 * 03      BRK, break, 0=off 1 =on (async)
-	 * 02      SYNCLD, sync char load enable (BSC) 1=enabled
-	 * 01      GOP, go active on poll (LOOP mode) 1=enabled
-	 * 00      RTS, RTS output control, 0=active 1=inactive
-	 *
-	 * 0001 0001
-	 */
-	RegValue = 0x10;
-	if (!(info->serial_signals & SerialSignal_RTS))
-		RegValue |= 0x01;
-	write_reg(info, CTL, RegValue);
-
-	/* preamble not supported ! */
-
-	tx_set_idle(info);
-	tx_stop(info);
-	rx_stop(info);
-
-	set_rate(info, info->params.clock_speed);
-
-	if (info->params.loopback)
-		enable_loopback(info,1);
-}
-
-/* Set the transmit HDLC idle mode
- */
-static void tx_set_idle(SLMP_INFO *info)
-{
-	unsigned char RegValue = 0xff;
-
-	/* Map API idle mode to SCA register bits */
-	switch(info->idle_mode) {
-	case HDLC_TXIDLE_FLAGS:			RegValue = 0x7e; break;
-	case HDLC_TXIDLE_ALT_ZEROS_ONES:	RegValue = 0xaa; break;
-	case HDLC_TXIDLE_ZEROS:			RegValue = 0x00; break;
-	case HDLC_TXIDLE_ONES:			RegValue = 0xff; break;
-	case HDLC_TXIDLE_ALT_MARK_SPACE:	RegValue = 0xaa; break;
-	case HDLC_TXIDLE_SPACE:			RegValue = 0x00; break;
-	case HDLC_TXIDLE_MARK:			RegValue = 0xff; break;
-	}
-
-	write_reg(info, IDL, RegValue);
-}
-
-/* Query the adapter for the state of the V24 status (input) signals.
- */
-static void get_signals(SLMP_INFO *info)
-{
-	u16 status = read_reg(info, SR3);
-	u16 gpstatus = read_status_reg(info);
-	u16 testbit;
-
-	/* clear all serial signals except RTS and DTR */
-	info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
-
-	/* set serial signal bits to reflect MISR */
-
-	if (!(status & BIT3))
-		info->serial_signals |= SerialSignal_CTS;
-
-	if ( !(status & BIT2))
-		info->serial_signals |= SerialSignal_DCD;
-
-	testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
-	if (!(gpstatus & testbit))
-		info->serial_signals |= SerialSignal_RI;
-
-	testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
-	if (!(gpstatus & testbit))
-		info->serial_signals |= SerialSignal_DSR;
-}
-
-/* Set the state of RTS and DTR based on contents of
- * serial_signals member of device context.
- */
-static void set_signals(SLMP_INFO *info)
-{
-	unsigned char RegValue;
-	u16 EnableBit;
-
-	RegValue = read_reg(info, CTL);
-	if (info->serial_signals & SerialSignal_RTS)
-		RegValue &= ~BIT0;
-	else
-		RegValue |= BIT0;
-	write_reg(info, CTL, RegValue);
-
-	// Port 0..3 DTR is ctrl reg <1,3,5,7>
-	EnableBit = BIT1 << (info->port_num*2);
-	if (info->serial_signals & SerialSignal_DTR)
-		info->port_array[0]->ctrlreg_value &= ~EnableBit;
-	else
-		info->port_array[0]->ctrlreg_value |= EnableBit;
-	write_control_reg(info);
-}
-
-/*******************/
-/* DMA Buffer Code */
-/*******************/
-
-/* Set the count for all receive buffers to SCABUFSIZE
- * and set the current buffer to the first buffer. This effectively
- * makes all buffers free and discards any data in buffers.
- */
-static void rx_reset_buffers(SLMP_INFO *info)
-{
-	rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
-}
-
-/* Free the buffers used by a received frame
- *
- * info   pointer to device instance data
- * first  index of 1st receive buffer of frame
- * last   index of last receive buffer of frame
- */
-static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
-{
-	bool done = false;
-
-	while(!done) {
-	        /* reset current buffer for reuse */
-		info->rx_buf_list[first].status = 0xff;
-
-	        if (first == last) {
-	                done = true;
-	                /* set new last rx descriptor address */
-			write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
-	        }
-
-	        first++;
-		if (first == info->rx_buf_count)
-			first = 0;
-	}
-
-	/* set current buffer to next buffer after last buffer of frame */
-	info->current_rx_buf = first;
-}
-
-/* Return a received frame from the receive DMA buffers.
- * Only frames received without errors are returned.
- *
- * Return Value:	true if frame returned, otherwise false
- */
-static bool rx_get_frame(SLMP_INFO *info)
-{
-	unsigned int StartIndex, EndIndex;	/* index of 1st and last buffers of Rx frame */
-	unsigned short status;
-	unsigned int framesize = 0;
-	bool ReturnCode = false;
-	unsigned long flags;
-	struct tty_struct *tty = info->port.tty;
-	unsigned char addr_field = 0xff;
-   	SCADESC *desc;
-	SCADESC_EX *desc_ex;
-
-CheckAgain:
-	/* assume no frame returned, set zero length */
-	framesize = 0;
-	addr_field = 0xff;
-
-	/*
-	 * current_rx_buf points to the 1st buffer of the next available
-	 * receive frame. To find the last buffer of the frame look for
-	 * a non-zero status field in the buffer entries. (The status
-	 * field is set by the 16C32 after completing a receive frame.
-	 */
-	StartIndex = EndIndex = info->current_rx_buf;
-
-	for ( ;; ) {
-		desc = &info->rx_buf_list[EndIndex];
-		desc_ex = &info->rx_buf_list_ex[EndIndex];
-
-		if (desc->status == 0xff)
-			goto Cleanup;	/* current desc still in use, no frames available */
-
-		if (framesize == 0 && info->params.addr_filter != 0xff)
-			addr_field = desc_ex->virt_addr[0];
-
-		framesize += desc->length;
-
-		/* Status != 0 means last buffer of frame */
-		if (desc->status)
-			break;
-
-		EndIndex++;
-		if (EndIndex == info->rx_buf_count)
-			EndIndex = 0;
-
-		if (EndIndex == info->current_rx_buf) {
-			/* all buffers have been 'used' but none mark	   */
-			/* the end of a frame. Reset buffers and receiver. */
-			if ( info->rx_enabled ){
-				spin_lock_irqsave(&info->lock,flags);
-				rx_start(info);
-				spin_unlock_irqrestore(&info->lock,flags);
-			}
-			goto Cleanup;
-		}
-
-	}
-
-	/* check status of receive frame */
-
-	/* frame status is byte stored after frame data
-	 *
-	 * 7 EOM (end of msg), 1 = last buffer of frame
-	 * 6 Short Frame, 1 = short frame
-	 * 5 Abort, 1 = frame aborted
-	 * 4 Residue, 1 = last byte is partial
-	 * 3 Overrun, 1 = overrun occurred during frame reception
-	 * 2 CRC,     1 = CRC error detected
-	 *
-	 */
-	status = desc->status;
-
-	/* ignore CRC bit if not using CRC (bit is undefined) */
-	/* Note:CRC is not save to data buffer */
-	if (info->params.crc_type == HDLC_CRC_NONE)
-		status &= ~BIT2;
-
-	if (framesize == 0 ||
-		 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
-		/* discard 0 byte frames, this seems to occur sometime
-		 * when remote is idling flags.
-		 */
-		rx_free_frame_buffers(info, StartIndex, EndIndex);
-		goto CheckAgain;
-	}
-
-	if (framesize < 2)
-		status |= BIT6;
-
-	if (status & (BIT6+BIT5+BIT3+BIT2)) {
-		/* received frame has errors,
-		 * update counts and mark frame size as 0
-		 */
-		if (status & BIT6)
-			info->icount.rxshort++;
-		else if (status & BIT5)
-			info->icount.rxabort++;
-		else if (status & BIT3)
-			info->icount.rxover++;
-		else
-			info->icount.rxcrc++;
-
-		framesize = 0;
-#if SYNCLINK_GENERIC_HDLC
-		{
-			info->netdev->stats.rx_errors++;
-			info->netdev->stats.rx_frame_errors++;
-		}
-#endif
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_BH )
-		printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
-			__FILE__,__LINE__,info->device_name,status,framesize);
-
-	if ( debug_level >= DEBUG_LEVEL_DATA )
-		trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
-			min_t(unsigned int, framesize, SCABUFSIZE), 0);
-
-	if (framesize) {
-		if (framesize > info->max_frame_size)
-			info->icount.rxlong++;
-		else {
-			/* copy dma buffer(s) to contiguous intermediate buffer */
-			int copy_count = framesize;
-			int index = StartIndex;
-			unsigned char *ptmp = info->tmp_rx_buf;
-			info->tmp_rx_buf_count = framesize;
-
-			info->icount.rxok++;
-
-			while(copy_count) {
-				int partial_count = min(copy_count,SCABUFSIZE);
-				memcpy( ptmp,
-					info->rx_buf_list_ex[index].virt_addr,
-					partial_count );
-				ptmp += partial_count;
-				copy_count -= partial_count;
-
-				if ( ++index == info->rx_buf_count )
-					index = 0;
-			}
-
-#if SYNCLINK_GENERIC_HDLC
-			if (info->netcount)
-				hdlcdev_rx(info,info->tmp_rx_buf,framesize);
-			else
-#endif
-				ldisc_receive_buf(tty,info->tmp_rx_buf,
-						  info->flag_buf, framesize);
-		}
-	}
-	/* Free the buffers used by this frame. */
-	rx_free_frame_buffers( info, StartIndex, EndIndex );
-
-	ReturnCode = true;
-
-Cleanup:
-	if ( info->rx_enabled && info->rx_overflow ) {
-		/* Receiver is enabled, but needs to restarted due to
-		 * rx buffer overflow. If buffers are empty, restart receiver.
-		 */
-		if (info->rx_buf_list[EndIndex].status == 0xff) {
-			spin_lock_irqsave(&info->lock,flags);
-			rx_start(info);
-			spin_unlock_irqrestore(&info->lock,flags);
-		}
-	}
-
-	return ReturnCode;
-}
-
-/* load the transmit DMA buffer with data
- */
-static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
-{
-	unsigned short copy_count;
-	unsigned int i = 0;
-	SCADESC *desc;
-	SCADESC_EX *desc_ex;
-
-	if ( debug_level >= DEBUG_LEVEL_DATA )
-		trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
-
-	/* Copy source buffer to one or more DMA buffers, starting with
-	 * the first transmit dma buffer.
-	 */
-	for(i=0;;)
-	{
-		copy_count = min_t(unsigned int, count, SCABUFSIZE);
-
-		desc = &info->tx_buf_list[i];
-		desc_ex = &info->tx_buf_list_ex[i];
-
-		load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
-
-		desc->length = copy_count;
-		desc->status = 0;
-
-		buf += copy_count;
-		count -= copy_count;
-
-		if (!count)
-			break;
-
-		i++;
-		if (i >= info->tx_buf_count)
-			i = 0;
-	}
-
-	info->tx_buf_list[i].status = 0x81;	/* set EOM and EOT status */
-	info->last_tx_buf = ++i;
-}
-
-static bool register_test(SLMP_INFO *info)
-{
-	static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
-	static unsigned int count = ARRAY_SIZE(testval);
-	unsigned int i;
-	bool rc = true;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->lock,flags);
-	reset_port(info);
-
-	/* assume failure */
-	info->init_error = DiagStatus_AddressFailure;
-
-	/* Write bit patterns to various registers but do it out of */
-	/* sync, then read back and verify values. */
-
-	for (i = 0 ; i < count ; i++) {
-		write_reg(info, TMC, testval[i]);
-		write_reg(info, IDL, testval[(i+1)%count]);
-		write_reg(info, SA0, testval[(i+2)%count]);
-		write_reg(info, SA1, testval[(i+3)%count]);
-
-		if ( (read_reg(info, TMC) != testval[i]) ||
-			  (read_reg(info, IDL) != testval[(i+1)%count]) ||
-			  (read_reg(info, SA0) != testval[(i+2)%count]) ||
-			  (read_reg(info, SA1) != testval[(i+3)%count]) )
-		{
-			rc = false;
-			break;
-		}
-	}
-
-	reset_port(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	return rc;
-}
-
-static bool irq_test(SLMP_INFO *info)
-{
-	unsigned long timeout;
-	unsigned long flags;
-
-	unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
-
-	spin_lock_irqsave(&info->lock,flags);
-	reset_port(info);
-
-	/* assume failure */
-	info->init_error = DiagStatus_IrqFailure;
-	info->irq_occurred = false;
-
-	/* setup timer0 on SCA0 to interrupt */
-
-	/* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
-	write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
-
-	write_reg(info, (unsigned char)(timer + TEPR), 0);	/* timer expand prescale */
-	write_reg16(info, (unsigned char)(timer + TCONR), 1);	/* timer constant */
-
-
-	/* TMCS, Timer Control/Status Register
-	 *
-	 * 07      CMF, Compare match flag (read only) 1=match
-	 * 06      ECMI, CMF Interrupt Enable: 1=enabled
-	 * 05      Reserved, must be 0
-	 * 04      TME, Timer Enable
-	 * 03..00  Reserved, must be 0
-	 *
-	 * 0101 0000
-	 */
-	write_reg(info, (unsigned char)(timer + TMCS), 0x50);
-
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	timeout=100;
-	while( timeout-- && !info->irq_occurred ) {
-		msleep_interruptible(10);
-	}
-
-	spin_lock_irqsave(&info->lock,flags);
-	reset_port(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	return info->irq_occurred;
-}
-
-/* initialize individual SCA device (2 ports)
- */
-static bool sca_init(SLMP_INFO *info)
-{
-	/* set wait controller to single mem partition (low), no wait states */
-	write_reg(info, PABR0, 0);	/* wait controller addr boundary 0 */
-	write_reg(info, PABR1, 0);	/* wait controller addr boundary 1 */
-	write_reg(info, WCRL, 0);	/* wait controller low range */
-	write_reg(info, WCRM, 0);	/* wait controller mid range */
-	write_reg(info, WCRH, 0);	/* wait controller high range */
-
-	/* DPCR, DMA Priority Control
-	 *
-	 * 07..05  Not used, must be 0
-	 * 04      BRC, bus release condition: 0=all transfers complete
-	 * 03      CCC, channel change condition: 0=every cycle
-	 * 02..00  PR<2..0>, priority 100=round robin
-	 *
-	 * 00000100 = 0x04
-	 */
-	write_reg(info, DPCR, dma_priority);
-
-	/* DMA Master Enable, BIT7: 1=enable all channels */
-	write_reg(info, DMER, 0x80);
-
-	/* enable all interrupt classes */
-	write_reg(info, IER0, 0xff);	/* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
-	write_reg(info, IER1, 0xff);	/* DMIB,DMIA (channels 0-3) */
-	write_reg(info, IER2, 0xf0);	/* TIRQ (timers 0-3) */
-
-	/* ITCR, interrupt control register
-	 * 07      IPC, interrupt priority, 0=MSCI->DMA
-	 * 06..05  IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
-	 * 04      VOS, Vector Output, 0=unmodified vector
-	 * 03..00  Reserved, must be 0
-	 */
-	write_reg(info, ITCR, 0);
-
-	return true;
-}
-
-/* initialize adapter hardware
- */
-static bool init_adapter(SLMP_INFO *info)
-{
-	int i;
-
-	/* Set BIT30 of Local Control Reg 0x50 to reset SCA */
-	volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
-	u32 readval;
-
-	info->misc_ctrl_value |= BIT30;
-	*MiscCtrl = info->misc_ctrl_value;
-
-	/*
-	 * Force at least 170ns delay before clearing
-	 * reset bit. Each read from LCR takes at least
-	 * 30ns so 10 times for 300ns to be safe.
-	 */
-	for(i=0;i<10;i++)
-		readval = *MiscCtrl;
-
-	info->misc_ctrl_value &= ~BIT30;
-	*MiscCtrl = info->misc_ctrl_value;
-
-	/* init control reg (all DTRs off, all clksel=input) */
-	info->ctrlreg_value = 0xaa;
-	write_control_reg(info);
-
-	{
-		volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
-		lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
-
-		switch(read_ahead_count)
-		{
-		case 16:
-			lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
-			break;
-		case 8:
-			lcr1_brdr_value |= BIT5 + BIT4;
-			break;
-		case 4:
-			lcr1_brdr_value |= BIT5 + BIT3;
-			break;
-		case 0:
-			lcr1_brdr_value |= BIT5;
-			break;
-		}
-
-		*LCR1BRDR = lcr1_brdr_value;
-		*MiscCtrl = misc_ctrl_value;
-	}
-
-	sca_init(info->port_array[0]);
-	sca_init(info->port_array[2]);
-
-	return true;
-}
-
-/* Loopback an HDLC frame to test the hardware
- * interrupt and DMA functions.
- */
-static bool loopback_test(SLMP_INFO *info)
-{
-#define TESTFRAMESIZE 20
-
-	unsigned long timeout;
-	u16 count = TESTFRAMESIZE;
-	unsigned char buf[TESTFRAMESIZE];
-	bool rc = false;
-	unsigned long flags;
-
-	struct tty_struct *oldtty = info->port.tty;
-	u32 speed = info->params.clock_speed;
-
-	info->params.clock_speed = 3686400;
-	info->port.tty = NULL;
-
-	/* assume failure */
-	info->init_error = DiagStatus_DmaFailure;
-
-	/* build and send transmit frame */
-	for (count = 0; count < TESTFRAMESIZE;++count)
-		buf[count] = (unsigned char)count;
-
-	memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
-
-	/* program hardware for HDLC and enabled receiver */
-	spin_lock_irqsave(&info->lock,flags);
-	hdlc_mode(info);
-	enable_loopback(info,1);
-       	rx_start(info);
-	info->tx_count = count;
-	tx_load_dma_buffer(info,buf,count);
-	tx_start(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	/* wait for receive complete */
-	/* Set a timeout for waiting for interrupt. */
-	for ( timeout = 100; timeout; --timeout ) {
-		msleep_interruptible(10);
-
-		if (rx_get_frame(info)) {
-			rc = true;
-			break;
-		}
-	}
-
-	/* verify received frame length and contents */
-	if (rc &&
-	    ( info->tmp_rx_buf_count != count ||
-	      memcmp(buf, info->tmp_rx_buf,count))) {
-		rc = false;
-	}
-
-	spin_lock_irqsave(&info->lock,flags);
-	reset_adapter(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	info->params.clock_speed = speed;
-	info->port.tty = oldtty;
-
-	return rc;
-}
-
-/* Perform diagnostics on hardware
- */
-static int adapter_test( SLMP_INFO *info )
-{
-	unsigned long flags;
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):Testing device %s\n",
-			__FILE__,__LINE__,info->device_name );
-
-	spin_lock_irqsave(&info->lock,flags);
-	init_adapter(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	info->port_array[0]->port_count = 0;
-
-	if ( register_test(info->port_array[0]) &&
-		register_test(info->port_array[1])) {
-
-		info->port_array[0]->port_count = 2;
-
-		if ( register_test(info->port_array[2]) &&
-			register_test(info->port_array[3]) )
-			info->port_array[0]->port_count += 2;
-	}
-	else {
-		printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
-			__FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
-		return -ENODEV;
-	}
-
-	if ( !irq_test(info->port_array[0]) ||
-		!irq_test(info->port_array[1]) ||
-		 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
-		 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
-		printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
-			__FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
-		return -ENODEV;
-	}
-
-	if (!loopback_test(info->port_array[0]) ||
-		!loopback_test(info->port_array[1]) ||
-		 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
-		 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
-		printk( "%s(%d):DMA test failure for device %s\n",
-			__FILE__,__LINE__,info->device_name);
-		return -ENODEV;
-	}
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):device %s passed diagnostics\n",
-			__FILE__,__LINE__,info->device_name );
-
-	info->port_array[0]->init_error = 0;
-	info->port_array[1]->init_error = 0;
-	if ( info->port_count > 2 ) {
-		info->port_array[2]->init_error = 0;
-		info->port_array[3]->init_error = 0;
-	}
-
-	return 0;
-}
-
-/* Test the shared memory on a PCI adapter.
- */
-static bool memory_test(SLMP_INFO *info)
-{
-	static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
-		0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
-	unsigned long count = ARRAY_SIZE(testval);
-	unsigned long i;
-	unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
-	unsigned long * addr = (unsigned long *)info->memory_base;
-
-	/* Test data lines with test pattern at one location. */
-
-	for ( i = 0 ; i < count ; i++ ) {
-		*addr = testval[i];
-		if ( *addr != testval[i] )
-			return false;
-	}
-
-	/* Test address lines with incrementing pattern over */
-	/* entire address range. */
-
-	for ( i = 0 ; i < limit ; i++ ) {
-		*addr = i * 4;
-		addr++;
-	}
-
-	addr = (unsigned long *)info->memory_base;
-
-	for ( i = 0 ; i < limit ; i++ ) {
-		if ( *addr != i * 4 )
-			return false;
-		addr++;
-	}
-
-	memset( info->memory_base, 0, SCA_MEM_SIZE );
-	return true;
-}
-
-/* Load data into PCI adapter shared memory.
- *
- * The PCI9050 releases control of the local bus
- * after completing the current read or write operation.
- *
- * While the PCI9050 write FIFO not empty, the
- * PCI9050 treats all of the writes as a single transaction
- * and does not release the bus. This causes DMA latency problems
- * at high speeds when copying large data blocks to the shared memory.
- *
- * This function breaks a write into multiple transations by
- * interleaving a read which flushes the write FIFO and 'completes'
- * the write transation. This allows any pending DMA request to gain control
- * of the local bus in a timely fasion.
- */
-static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
-{
-	/* A load interval of 16 allows for 4 32-bit writes at */
-	/* 136ns each for a maximum latency of 542ns on the local bus.*/
-
-	unsigned short interval = count / sca_pci_load_interval;
-	unsigned short i;
-
-	for ( i = 0 ; i < interval ; i++ )
-	{
-		memcpy(dest, src, sca_pci_load_interval);
-		read_status_reg(info);
-		dest += sca_pci_load_interval;
-		src += sca_pci_load_interval;
-	}
-
-	memcpy(dest, src, count % sca_pci_load_interval);
-}
-
-static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
-{
-	int i;
-	int linecount;
-	if (xmit)
-		printk("%s tx data:\n",info->device_name);
-	else
-		printk("%s rx data:\n",info->device_name);
-
-	while(count) {
-		if (count > 16)
-			linecount = 16;
-		else
-			linecount = count;
-
-		for(i=0;i<linecount;i++)
-			printk("%02X ",(unsigned char)data[i]);
-		for(;i<17;i++)
-			printk("   ");
-		for(i=0;i<linecount;i++) {
-			if (data[i]>=040 && data[i]<=0176)
-				printk("%c",data[i]);
-			else
-				printk(".");
-		}
-		printk("\n");
-
-		data  += linecount;
-		count -= linecount;
-	}
-}	/* end of trace_block() */
-
-/* called when HDLC frame times out
- * update stats and do tx completion processing
- */
-static void tx_timeout(struct timer_list *t)
-{
-	SLMP_INFO *info = from_timer(info, t, tx_timer);
-	unsigned long flags;
-
-	if ( debug_level >= DEBUG_LEVEL_INFO )
-		printk( "%s(%d):%s tx_timeout()\n",
-			__FILE__,__LINE__,info->device_name);
-	if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
-		info->icount.txtimeout++;
-	}
-	spin_lock_irqsave(&info->lock,flags);
-	info->tx_active = false;
-	info->tx_count = info->tx_put = info->tx_get = 0;
-
-	spin_unlock_irqrestore(&info->lock,flags);
-
-#if SYNCLINK_GENERIC_HDLC
-	if (info->netcount)
-		hdlcdev_tx_done(info);
-	else
-#endif
-		bh_transmit(info);
-}
-
-/* called to periodically check the DSR/RI modem signal input status
- */
-static void status_timeout(struct timer_list *t)
-{
-	u16 status = 0;
-	SLMP_INFO *info = from_timer(info, t, status_timer);
-	unsigned long flags;
-	unsigned char delta;
-
-
-	spin_lock_irqsave(&info->lock,flags);
-	get_signals(info);
-	spin_unlock_irqrestore(&info->lock,flags);
-
-	/* check for DSR/RI state change */
-
-	delta = info->old_signals ^ info->serial_signals;
-	info->old_signals = info->serial_signals;
-
-	if (delta & SerialSignal_DSR)
-		status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
-
-	if (delta & SerialSignal_RI)
-		status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
-
-	if (delta & SerialSignal_DCD)
-		status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
-
-	if (delta & SerialSignal_CTS)
-		status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
-
-	if (status)
-		isr_io_pin(info,status);
-
-	mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
-}
-
-
-/* Register Access Routines -
- * All registers are memory mapped
- */
-#define CALC_REGADDR() \
-	unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
-	if (info->port_num > 1) \
-		RegAddr += 256;	    		/* port 0-1 SCA0, 2-3 SCA1 */ \
-	if ( info->port_num & 1) { \
-		if (Addr > 0x7f) \
-			RegAddr += 0x40;	/* DMA access */ \
-		else if (Addr > 0x1f && Addr < 0x60) \
-			RegAddr += 0x20;	/* MSCI access */ \
-	}
-
-
-static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
-{
-	CALC_REGADDR();
-	return *RegAddr;
-}
-static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
-{
-	CALC_REGADDR();
-	*RegAddr = Value;
-}
-
-static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
-{
-	CALC_REGADDR();
-	return *((u16 *)RegAddr);
-}
-
-static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
-{
-	CALC_REGADDR();
-	*((u16 *)RegAddr) = Value;
-}
-
-static unsigned char read_status_reg(SLMP_INFO * info)
-{
-	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
-	return *RegAddr;
-}
-
-static void write_control_reg(SLMP_INFO * info)
-{
-	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
-	*RegAddr = info->port_array[0]->ctrlreg_value;
-}
-
-
-static int synclinkmp_init_one (struct pci_dev *dev,
-					  const struct pci_device_id *ent)
-{
-	if (pci_enable_device(dev)) {
-		printk("error enabling pci device %p\n", dev);
-		return -EIO;
-	}
-	return device_init( ++synclinkmp_adapter_count, dev );
-}
-
-static void synclinkmp_remove_one (struct pci_dev *dev)
-{
-}
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index 9f906a5b8e81..32898aabcd06 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -81,7 +81,7 @@ static void tty_audit_log(const char *description, dev_t dev,
 	}
 }
 
-/**
+/*
  *	tty_audit_buf_push	-	Push buffered data out
  *
  *	Generate an audit message from the contents of @buf, which is owned by
@@ -120,7 +120,7 @@ void tty_audit_exit(void)
 	tty_audit_buf_free(buf);
 }
 
-/**
+/*
  *	tty_audit_fork	-	Copy TTY audit state for a new task
  *
  *	Set up TTY audit state in @sig from current.  @sig needs no locking.
@@ -130,7 +130,7 @@ void tty_audit_fork(struct signal_struct *sig)
 	sig->audit_tty = current->signal->audit_tty;
 }
 
-/**
+/*
  *	tty_audit_tiocsti	-	Log TIOCSTI
  */
 void tty_audit_tiocsti(struct tty_struct *tty, char ch)
@@ -145,7 +145,7 @@ void tty_audit_tiocsti(struct tty_struct *tty, char ch)
 		tty_audit_log("ioctl=TIOCSTI", dev, &ch, 1);
 }
 
-/**
+/*
  *	tty_audit_push	-	Flush current's pending audit data
  *
  *	Returns 0 if success, -EPERM if tty audit is disabled
@@ -166,7 +166,7 @@ int tty_audit_push(void)
 	return 0;
 }
 
-/**
+/*
  *	tty_audit_buf_get	-	Get an audit buffer.
  *
  *	Get an audit buffer, allocate it if necessary.  Return %NULL
@@ -193,7 +193,7 @@ static struct tty_audit_buf *tty_audit_buf_get(void)
 	return tty_audit_buf_ref();
 }
 
-/**
+/*
  *	tty_audit_add_data	-	Add data for TTY auditing.
  *
  *	Audit @data of @size from @tty, if necessary.
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
index 84fec3c62d6a..6551b188b736 100644
--- a/drivers/tty/tty_baudrate.c
+++ b/drivers/tty/tty_baudrate.c
@@ -222,6 +222,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
 
 /**
  *	tty_encode_baud_rate		-	set baud rate of the tty
+ *	@tty:   terminal device
  *	@ibaud: input baud rate
  *	@obaud: output baud rate
  *
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bd2d91546e32..6d4995a5f318 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -583,6 +583,7 @@ void tty_buffer_init(struct tty_port *port)
 /**
  *	tty_buffer_set_limit	-	change the tty buffer memory limit
  *	@port: tty port to change
+ *	@limit: memory limit to set
  *
  *	Change the tty buffer memory limit.
  *	Must be called before the other tty buffer functions are used.
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 56ade99ef99f..8034489337d7 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -208,7 +208,7 @@ void tty_add_file(struct tty_struct *tty, struct file *file)
 	spin_unlock(&tty->files_lock);
 }
 
-/**
+/*
  * tty_free_file - free file->private_data
  *
  * This shall be used only for fail path handling when tty_add_file was not
@@ -514,8 +514,6 @@ static const struct file_operations hung_up_tty_fops = {
 static DEFINE_SPINLOCK(redirect_lock);
 static struct file *redirect;
 
-extern void tty_sysctl_init(void);
-
 /**
  *	tty_wakeup	-	request more data
  *	@tty: terminal
@@ -545,6 +543,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
 /**
  *	__tty_hangup		-	actual handler for hangup events
  *	@tty: tty device
+ *	@exit_session: if non-zero, signal all foreground group processes
  *
  *	This can be called by a "kworker" kernel thread.  That is process
  *	synchronous but doesn't hold any locks, so we need to make sure we
@@ -1067,7 +1066,7 @@ ssize_t redirected_tty_write(struct file *file, const char __user *buf,
 	return tty_write(file, buf, count, ppos);
 }
 
-/**
+/*
  *	tty_send_xchar	-	send priority character
  *
  *	Send a high priority character to the tty even if stopped
@@ -1145,6 +1144,7 @@ static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
 /**
  *	tty_driver_lookup_tty() - find an existing tty, if any
  *	@driver: the driver for the tty
+ *	@file:   file object
  *	@idx:	 the minor number
  *
  *	Return the tty, if found. If not found, return NULL or ERR_PTR() if the
@@ -1496,6 +1496,8 @@ EXPORT_SYMBOL(tty_kref_put);
 
 /**
  *	release_tty		-	release tty structure memory
+ *	@tty: tty device release
+ *	@idx: index of the tty device release
  *
  *	Release both @tty and a possible linked partner (think pty pair),
  *	and decrement the refcount of the backing module.
@@ -2970,7 +2972,7 @@ static struct device *tty_get_device(struct tty_struct *tty)
 }
 
 
-/**
+/*
  *	alloc_tty_struct
  *
  *	This subroutine allocates and initializes a tty structure.
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index e18f318586ab..4de1c6ddb8ff 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -443,51 +443,6 @@ static int get_termio(struct tty_struct *tty, struct termio __user *termio)
 	return 0;
 }
 
-
-#ifdef TCGETX
-
-/**
- *	set_termiox	-	set termiox fields if possible
- *	@tty: terminal
- *	@arg: termiox structure from user
- *	@opt: option flags for ioctl type
- *
- *	Implement the device calling points for the SYS5 termiox ioctl
- *	interface in Linux
- */
-
-static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
-{
-	struct termiox tnew;
-	struct tty_ldisc *ld;
-
-	if (tty->termiox == NULL)
-		return -EINVAL;
-	if (copy_from_user(&tnew, arg, sizeof(struct termiox)))
-		return -EFAULT;
-
-	ld = tty_ldisc_ref(tty);
-	if (ld != NULL) {
-		if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
-			ld->ops->flush_buffer(tty);
-		tty_ldisc_deref(ld);
-	}
-	if (opt & TERMIOS_WAIT) {
-		tty_wait_until_sent(tty, 0);
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-	}
-
-	down_write(&tty->termios_rwsem);
-	if (tty->ops->set_termiox)
-		tty->ops->set_termiox(tty, &tnew);
-	up_write(&tty->termios_rwsem);
-	return 0;
-}
-
-#endif
-
-
 #ifdef TIOCGETP
 /*
  * These are deprecated, but there is limited support..
@@ -815,23 +770,11 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return ret;
 #endif
 #ifdef TCGETX
-	case TCGETX: {
-		struct termiox ktermx;
-		if (real_tty->termiox == NULL)
-			return -EINVAL;
-		down_read(&real_tty->termios_rwsem);
-		memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox));
-		up_read(&real_tty->termios_rwsem);
-		if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
-			ret = -EFAULT;
-		return ret;
-	}
+	case TCGETX:
 	case TCSETX:
-		return set_termiox(real_tty, p, 0);
 	case TCSETXW:
-		return set_termiox(real_tty, p, TERMIOS_WAIT);
 	case TCSETXF:
-		return set_termiox(real_tty, p, TERMIOS_FLUSH);
+		return -EINVAL;
 #endif		
 	case TIOCGSOFTCAR:
 		copy_termios(real_tty, &kterm);
diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c
index aa6d0537b379..4b751b9285ad 100644
--- a/drivers/tty/tty_jobctrl.c
+++ b/drivers/tty/tty_jobctrl.c
@@ -21,6 +21,7 @@ static int is_ignored(int sig)
 /**
  *	tty_check_change	-	check for POSIX terminal changes
  *	@tty: tty to check
+ *	@sig: signal to send
  *
  *	If we try to write to, or set the state of, a terminal and we're
  *	not in the foreground, send a SIGTTOU.  If the signal is blocked or
@@ -83,6 +84,7 @@ void proc_clear_tty(struct task_struct *p)
 
 /**
  * proc_set_tty -  set the controlling terminal
+ *	@tty: tty structure
  *
  * Only callable by the session leader and only if it does not already have
  * a controlling terminal.
@@ -333,6 +335,7 @@ void no_tty(void)
 /**
  *	tiocsctty	-	set controlling tty
  *	@tty: tty structure
+ *	@file: file structure used to check permissions
  *	@arg: user argument
  *
  *	This ioctl is used to manage job control. It permits a session
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index fe37ec331289..1ba74d6f5e5c 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -135,8 +135,10 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
 	raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags);
 }
 
+static int tty_ldisc_autoload = IS_BUILTIN(CONFIG_LDISC_AUTOLOAD);
 /**
  *	tty_ldisc_get		-	take a reference to an ldisc
+ *	@tty: tty device
  *	@disc: ldisc number
  *
  *	Takes a reference to a line discipline. Deals with refcounts and
@@ -155,8 +157,6 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
  *		takes tty_ldiscs_lock to guard against ldisc races
  */
 
-static int tty_ldisc_autoload = IS_BUILTIN(CONFIG_LDISC_AUTOLOAD);
-
 static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
 {
 	struct tty_ldisc *ld;
@@ -190,7 +190,7 @@ static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
 	return ld;
 }
 
-/**
+/*
  *	tty_ldisc_put		-	release the ldisc
  *
  *	Complement of tty_ldisc_get().
@@ -250,12 +250,12 @@ const struct seq_operations tty_ldiscs_seq_ops = {
  *	Returns: NULL if the tty has been hungup and not re-opened with
  *		 a new file descriptor, otherwise valid ldisc reference
  *
- *	Note: Must not be called from an IRQ/timer context. The caller
+ *	Note 1: Must not be called from an IRQ/timer context. The caller
  *	must also be careful not to hold other locks that will deadlock
  *	against a discipline change, such as an existing ldisc reference
  *	(which we check for)
  *
- *	Note: a file_operations routine (read/poll/write) should use this
+ *	Note 2: a file_operations routine (read/poll/write) should use this
  *	function to wait for any ldisc lifetime events to finish.
  */
 
@@ -701,6 +701,7 @@ int tty_ldisc_reinit(struct tty_struct *tty, int disc)
 /**
  *	tty_ldisc_hangup		-	hangup ldisc reset
  *	@tty: tty being hung up
+ *	@reinit: whether to re-initialise the tty
  *
  *	Some tty devices reset their termios when they receive a hangup
  *	event. In that situation we must also switch back to N_TTY properly
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index ea80bf872f54..346d20f4a486 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -623,7 +623,7 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
 }
 EXPORT_SYMBOL(tty_port_close_end);
 
-/**
+/*
  * tty_port_close
  *
  * Caller holds tty lock
@@ -659,7 +659,7 @@ int tty_port_install(struct tty_port *port, struct tty_driver *driver,
 }
 EXPORT_SYMBOL_GPL(tty_port_install);
 
-/**
+/*
  * tty_port_open
  *
  * Caller holds tty lock.
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 5d778c0aa009..f7d015c67963 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -728,9 +728,8 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
 }
 EXPORT_SYMBOL(con_copy_unimap);
 
-/**
+/*
  *	con_get_unimap		-	get the unicode map
- *	@vc: the console to read from
  *
  *	Read the console unicode data for this console. Called from the ioctl
  *	handlers.
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 78acc270e39a..52922d21a49f 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -26,36 +26,34 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/consolemap.h>
-#include <linux/module.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/debug.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/mm.h>
-#include <linux/nospec.h>
-#include <linux/string.h>
 #include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <linux/kbd_kern.h>
-#include <linux/kbd_diacr.h>
-#include <linux/vt_kern.h>
 #include <linux/input.h>
-#include <linux/reboot.h>
-#include <linux/notifier.h>
 #include <linux/jiffies.h>
+#include <linux/kbd_diacr.h>
+#include <linux/kbd_kern.h>
+#include <linux/leds.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/nospec.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/tty_flip.h>
+#include <linux/tty.h>
 #include <linux/uaccess.h>
+#include <linux/vt_kern.h>
 
 #include <asm/irq_regs.h>
 
-extern void ctrl_alt_del(void);
-
 /*
  * Exported functions/variables
  */
 
-#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
+#define KBD_DEFMODE (BIT(VC_REPEAT) | BIT(VC_META))
 
 #if defined(CONFIG_X86) || defined(CONFIG_PARISC)
 #include <asm/kbdleds.h>
@@ -113,10 +111,22 @@ static struct kbd_struct kbd_table[MAX_NR_CONSOLES];
 static struct kbd_struct *kbd = kbd_table;
 
 /* maximum values each key_handler can handle */
-static const int max_vals[] = {
-	255, ARRAY_SIZE(func_table) - 1, ARRAY_SIZE(fn_handler) - 1, NR_PAD - 1,
-	NR_DEAD - 1, 255, 3, NR_SHIFT - 1, 255, NR_ASCII - 1, NR_LOCK - 1,
-	255, NR_LOCK - 1, 255, NR_BRL - 1
+static const unsigned char max_vals[] = {
+	[ KT_LATIN	] = 255,
+	[ KT_FN		] = ARRAY_SIZE(func_table) - 1,
+	[ KT_SPEC	] = ARRAY_SIZE(fn_handler) - 1,
+	[ KT_PAD	] = NR_PAD - 1,
+	[ KT_DEAD	] = NR_DEAD - 1,
+	[ KT_CONS	] = 255,
+	[ KT_CUR	] = 3,
+	[ KT_SHIFT	] = NR_SHIFT - 1,
+	[ KT_META	] = 255,
+	[ KT_ASCII	] = NR_ASCII - 1,
+	[ KT_LOCK	] = NR_LOCK - 1,
+	[ KT_LETTER	] = 255,
+	[ KT_SLOCK	] = NR_LOCK - 1,
+	[ KT_DEAD2	] = 255,
+	[ KT_BRL	] = NR_BRL - 1,
 };
 
 static const int NR_TYPES = ARRAY_SIZE(max_vals);
@@ -125,7 +135,7 @@ static struct input_handler kbd_handler;
 static DEFINE_SPINLOCK(kbd_event_lock);
 static DEFINE_SPINLOCK(led_lock);
 static DEFINE_SPINLOCK(func_buf_lock); /* guard 'func_buf'  and friends */
-static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];	/* keyboard key bitmap */
+static DECLARE_BITMAP(key_down, KEY_CNT);	/* keyboard key bitmap */
 static unsigned char shift_down[NR_SHIFT];		/* shift state counters.. */
 static bool dead_key_next;
 
@@ -134,7 +144,7 @@ static bool npadch_active;
 static unsigned int npadch_value;
 
 static unsigned int diacr;
-static char rep;					/* flag telling character repeat */
+static bool rep;			/* flag telling character repeat */
 
 static int shift_state = 0;
 
@@ -314,12 +324,9 @@ static void put_queue(struct vc_data *vc, int ch)
 	tty_schedule_flip(&vc->port);
 }
 
-static void puts_queue(struct vc_data *vc, char *cp)
+static void puts_queue(struct vc_data *vc, const char *cp)
 {
-	while (*cp) {
-		tty_insert_flip_char(&vc->port, *cp, 0);
-		cp++;
-	}
+	tty_insert_flip_string(&vc->port, cp, strlen(cp));
 	tty_schedule_flip(&vc->port);
 }
 
@@ -455,9 +462,9 @@ static void fn_enter(struct vc_data *vc)
 		diacr = 0;
 	}
 
-	put_queue(vc, 13);
+	put_queue(vc, '\r');
 	if (vc_kbd_mode(kbd, VC_CRLF))
-		put_queue(vc, 10);
+		put_queue(vc, '\n');
 }
 
 static void fn_caps_toggle(struct vc_data *vc)
@@ -820,7 +827,7 @@ static void k_pad(struct vc_data *vc, unsigned char value, char up_flag)
 
 	put_queue(vc, pad_chars[value]);
 	if (value == KVAL(K_PENTER) && vc_kbd_mode(kbd, VC_CRLF))
-		put_queue(vc, 10);
+		put_queue(vc, '\n');
 }
 
 static void k_shift(struct vc_data *vc, unsigned char value, char up_flag)
@@ -850,9 +857,9 @@ static void k_shift(struct vc_data *vc, unsigned char value, char up_flag)
 		shift_down[value]++;
 
 	if (shift_down[value])
-		shift_state |= (1 << value);
+		shift_state |= BIT(value);
 	else
-		shift_state &= ~(1 << value);
+		shift_state &= ~BIT(value);
 
 	/* kludge */
 	if (up_flag && shift_state != old_state && npadch_active) {
@@ -873,7 +880,7 @@ static void k_meta(struct vc_data *vc, unsigned char value, char up_flag)
 		put_queue(vc, '\033');
 		put_queue(vc, value);
 	} else
-		put_queue(vc, value | 0x80);
+		put_queue(vc, value | BIT(7));
 }
 
 static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag)
@@ -969,7 +976,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
 		return;
 
 	if (!up_flag) {
-		pressed |= 1 << (value - 1);
+		pressed |= BIT(value - 1);
 		if (!brl_timeout)
 			committing = pressed;
 	} else if (brl_timeout) {
@@ -979,7 +986,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
 			committing = pressed;
 			releasestart = jiffies;
 		}
-		pressed &= ~(1 << (value - 1));
+		pressed &= ~BIT(value - 1);
 		if (!pressed && committing) {
 			k_brlcommit(vc, committing, 0);
 			committing = 0;
@@ -989,7 +996,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
 			k_brlcommit(vc, committing, 0);
 			committing = 0;
 		}
-		pressed &= ~(1 << (value - 1));
+		pressed &= ~BIT(value - 1);
 	}
 }
 
@@ -1089,9 +1096,9 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data)
 	unsigned int leds = *(unsigned int *)data;
 
 	if (test_bit(EV_LED, handle->dev->evbit)) {
-		input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
-		input_inject_event(handle, EV_LED, LED_NUML,    !!(leds & 0x02));
-		input_inject_event(handle, EV_LED, LED_CAPSL,   !!(leds & 0x04));
+		input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & BIT(0)));
+		input_inject_event(handle, EV_LED, LED_NUML,    !!(leds & BIT(1)));
+		input_inject_event(handle, EV_LED, LED_CAPSL,   !!(leds & BIT(2)));
 		input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
 	}
 
@@ -1249,8 +1256,14 @@ DECLARE_TASKLET_DISABLED_OLD(keyboard_tasklet, kbd_bh);
     defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
     (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
 
-#define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
-			((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
+static inline bool kbd_is_hw_raw(const struct input_dev *dev)
+{
+	if (!test_bit(EV_MSC, dev->evbit) || !test_bit(MSC_RAW, dev->mscbit))
+		return false;
+
+	return dev->id.bustype == BUS_I8042 &&
+		dev->id.vendor == 0x0001 && dev->id.product == 0x0001;
+}
 
 static const unsigned short x86_keycodes[256] =
 	{ 0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
@@ -1335,7 +1348,10 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
 
 #else
 
-#define HW_RAW(dev)	0
+static inline bool kbd_is_hw_raw(const struct input_dev *dev)
+{
+	return false;
+}
 
 static int emulate_raw(struct vc_data *vc, unsigned int keycode, unsigned char up_flag)
 {
@@ -1356,7 +1372,7 @@ static void kbd_rawcode(unsigned char data)
 		put_queue(vc, data);
 }
 
-static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
+static void kbd_keycode(unsigned int keycode, int down, bool hw_raw)
 {
 	struct vc_data *vc = vc_cons[fg_console].d;
 	unsigned short keysym, *key_map;
@@ -1411,16 +1427,13 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 			put_queue(vc, keycode | (!down << 7));
 		} else {
 			put_queue(vc, !down << 7);
-			put_queue(vc, (keycode >> 7) | 0x80);
-			put_queue(vc, keycode | 0x80);
+			put_queue(vc, (keycode >> 7) | BIT(7));
+			put_queue(vc, keycode | BIT(7));
 		}
 		raw_mode = true;
 	}
 
-	if (down)
-		set_bit(keycode, key_down);
-	else
-		clear_bit(keycode, key_down);
+	assign_bit(keycode, key_down, down);
 
 	if (rep &&
 	    (!vc_kbd_mode(kbd, VC_REPEAT) ||
@@ -1471,7 +1484,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 	if (type == KT_LETTER) {
 		type = KT_LATIN;
 		if (vc_kbd_led(kbd, VC_CAPSLOCK)) {
-			key_map = key_maps[shift_final ^ (1 << KG_SHIFT)];
+			key_map = key_maps[shift_final ^ BIT(KG_SHIFT)];
 			if (key_map)
 				keysym = key_map[keycode];
 		}
@@ -1501,10 +1514,11 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type,
 	/* We are called with interrupts disabled, just take the lock */
 	spin_lock(&kbd_event_lock);
 
-	if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev))
+	if (event_type == EV_MSC && event_code == MSC_RAW &&
+			kbd_is_hw_raw(handle->dev))
 		kbd_rawcode(value);
 	if (event_type == EV_KEY && event_code <= KEY_MAX)
-		kbd_keycode(event_code, value, HW_RAW(handle->dev));
+		kbd_keycode(event_code, value, kbd_is_hw_raw(handle->dev));
 
 	spin_unlock(&kbd_event_lock);
 
@@ -1515,18 +1529,16 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type,
 
 static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
 {
-	int i;
-
 	if (test_bit(EV_SND, dev->evbit))
 		return true;
 
 	if (test_bit(EV_KEY, dev->evbit)) {
-		for (i = KEY_RESERVED; i < BTN_MISC; i++)
-			if (test_bit(i, dev->keybit))
-				return true;
-		for (i = KEY_BRL_DOT1; i <= KEY_BRL_DOT10; i++)
-			if (test_bit(i, dev->keybit))
-				return true;
+		if (find_next_bit(dev->keybit, BTN_MISC, KEY_RESERVED) <
+				BTN_MISC)
+			return true;
+		if (find_next_bit(dev->keybit, KEY_BRL_DOT10 + 1,
+					KEY_BRL_DOT1) <= KEY_BRL_DOT10)
+			return true;
 	}
 
 	return false;
@@ -1887,239 +1899,191 @@ int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc,
 	return kc;
 }
 
-#define i (tmp.kb_index)
-#define s (tmp.kb_table)
-#define v (tmp.kb_value)
-
-int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm,
-						int console)
+static unsigned short vt_kdgkbent(unsigned char kbdmode, unsigned char idx,
+		unsigned char map)
 {
-	struct kbd_struct *kb = kbd_table + console;
-	struct kbentry tmp;
-	ushort *key_map, *new_map, val, ov;
+	unsigned short *key_map, val;
 	unsigned long flags;
 
-	if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry)))
-		return -EFAULT;
+	/* Ensure another thread doesn't free it under us */
+	spin_lock_irqsave(&kbd_event_lock, flags);
+	key_map = key_maps[map];
+	if (key_map) {
+		val = U(key_map[idx]);
+		if (kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES)
+			val = K_HOLE;
+	} else
+		val = idx ? K_HOLE : K_NOSUCHMAP;
+	spin_unlock_irqrestore(&kbd_event_lock, flags);
 
-	if (!capable(CAP_SYS_TTY_CONFIG))
-		perm = 0;
+	return val;
+}
 
-	switch (cmd) {
-	case KDGKBENT:
-		/* Ensure another thread doesn't free it under us */
+static int vt_kdskbent(unsigned char kbdmode, unsigned char idx,
+		unsigned char map, unsigned short val)
+{
+	unsigned long flags;
+	unsigned short *key_map, *new_map, oldval;
+
+	if (!idx && val == K_NOSUCHMAP) {
 		spin_lock_irqsave(&kbd_event_lock, flags);
-		key_map = key_maps[s];
-		if (key_map) {
-		    val = U(key_map[i]);
-		    if (kb->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES)
-			val = K_HOLE;
-		} else
-		    val = (i ? K_HOLE : K_NOSUCHMAP);
-		spin_unlock_irqrestore(&kbd_event_lock, flags);
-		return put_user(val, &user_kbe->kb_value);
-	case KDSKBENT:
-		if (!perm)
-			return -EPERM;
-		if (!i && v == K_NOSUCHMAP) {
-			spin_lock_irqsave(&kbd_event_lock, flags);
-			/* deallocate map */
-			key_map = key_maps[s];
-			if (s && key_map) {
-			    key_maps[s] = NULL;
-			    if (key_map[0] == U(K_ALLOCATED)) {
-					kfree(key_map);
-					keymap_count--;
-			    }
+		/* deallocate map */
+		key_map = key_maps[map];
+		if (map && key_map) {
+			key_maps[map] = NULL;
+			if (key_map[0] == U(K_ALLOCATED)) {
+				kfree(key_map);
+				keymap_count--;
 			}
-			spin_unlock_irqrestore(&kbd_event_lock, flags);
-			break;
 		}
+		spin_unlock_irqrestore(&kbd_event_lock, flags);
+
+		return 0;
+	}
 
-		if (KTYP(v) < NR_TYPES) {
-		    if (KVAL(v) > max_vals[KTYP(v)])
-				return -EINVAL;
-		} else
-		    if (kb->kbdmode != VC_UNICODE)
-				return -EINVAL;
+	if (KTYP(val) < NR_TYPES) {
+		if (KVAL(val) > max_vals[KTYP(val)])
+			return -EINVAL;
+	} else if (kbdmode != VC_UNICODE)
+		return -EINVAL;
 
-		/* ++Geert: non-PC keyboards may generate keycode zero */
+	/* ++Geert: non-PC keyboards may generate keycode zero */
 #if !defined(__mc68000__) && !defined(__powerpc__)
-		/* assignment to entry 0 only tests validity of args */
-		if (!i)
-			break;
+	/* assignment to entry 0 only tests validity of args */
+	if (!idx)
+		return 0;
 #endif
 
-		new_map = kmalloc(sizeof(plain_map), GFP_KERNEL);
-		if (!new_map)
-			return -ENOMEM;
-		spin_lock_irqsave(&kbd_event_lock, flags);
-		key_map = key_maps[s];
-		if (key_map == NULL) {
-			int j;
-
-			if (keymap_count >= MAX_NR_OF_USER_KEYMAPS &&
-			    !capable(CAP_SYS_RESOURCE)) {
-				spin_unlock_irqrestore(&kbd_event_lock, flags);
-				kfree(new_map);
-				return -EPERM;
-			}
-			key_maps[s] = new_map;
-			key_map = new_map;
-			key_map[0] = U(K_ALLOCATED);
-			for (j = 1; j < NR_KEYS; j++)
-				key_map[j] = U(K_HOLE);
-			keymap_count++;
-		} else
-			kfree(new_map);
+	new_map = kmalloc(sizeof(plain_map), GFP_KERNEL);
+	if (!new_map)
+		return -ENOMEM;
 
-		ov = U(key_map[i]);
-		if (v == ov)
-			goto out;
-		/*
-		 * Attention Key.
-		 */
-		if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN)) {
+	spin_lock_irqsave(&kbd_event_lock, flags);
+	key_map = key_maps[map];
+	if (key_map == NULL) {
+		int j;
+
+		if (keymap_count >= MAX_NR_OF_USER_KEYMAPS &&
+		    !capable(CAP_SYS_RESOURCE)) {
 			spin_unlock_irqrestore(&kbd_event_lock, flags);
+			kfree(new_map);
 			return -EPERM;
 		}
-		key_map[i] = U(v);
-		if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT))
-			do_compute_shiftstate();
-out:
+		key_maps[map] = new_map;
+		key_map = new_map;
+		key_map[0] = U(K_ALLOCATED);
+		for (j = 1; j < NR_KEYS; j++)
+			key_map[j] = U(K_HOLE);
+		keymap_count++;
+	} else
+		kfree(new_map);
+
+	oldval = U(key_map[idx]);
+	if (val == oldval)
+		goto out;
+
+	/* Attention Key */
+	if ((oldval == K_SAK || val == K_SAK) && !capable(CAP_SYS_ADMIN)) {
 		spin_unlock_irqrestore(&kbd_event_lock, flags);
-		break;
+		return -EPERM;
 	}
+
+	key_map[idx] = U(val);
+	if (!map && (KTYP(oldval) == KT_SHIFT || KTYP(val) == KT_SHIFT))
+		do_compute_shiftstate();
+out:
+	spin_unlock_irqrestore(&kbd_event_lock, flags);
+
 	return 0;
 }
-#undef i
-#undef s
-#undef v
 
-/* FIXME: This one needs untangling */
-int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm)
+int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm,
+						int console)
 {
-	struct kbsentry *kbs;
-	u_char *q;
-	int sz, fnw_sz;
-	int delta;
-	char *first_free, *fj, *fnw;
-	int i, j, k;
-	int ret;
-	unsigned long flags;
+	struct kbd_struct *kb = kbd_table + console;
+	struct kbentry kbe;
 
-	if (!capable(CAP_SYS_TTY_CONFIG))
-		perm = 0;
+	if (copy_from_user(&kbe, user_kbe, sizeof(struct kbentry)))
+		return -EFAULT;
 
-	kbs = kmalloc(sizeof(*kbs), GFP_KERNEL);
-	if (!kbs) {
-		ret = -ENOMEM;
-		goto reterr;
+	switch (cmd) {
+	case KDGKBENT:
+		return put_user(vt_kdgkbent(kb->kbdmode, kbe.kb_index,
+					kbe.kb_table),
+				&user_kbe->kb_value);
+	case KDSKBENT:
+		if (!perm || !capable(CAP_SYS_TTY_CONFIG))
+			return -EPERM;
+		return vt_kdskbent(kb->kbdmode, kbe.kb_index, kbe.kb_table,
+				kbe.kb_value);
 	}
+	return 0;
+}
 
-	/* we mostly copy too much here (512bytes), but who cares ;) */
-	if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) {
-		ret = -EFAULT;
-		goto reterr;
+static char *vt_kdskbsent(char *kbs, unsigned char cur)
+{
+	static DECLARE_BITMAP(is_kmalloc, MAX_NR_FUNC);
+	char *cur_f = func_table[cur];
+
+	if (cur_f && strlen(cur_f) >= strlen(kbs)) {
+		strcpy(cur_f, kbs);
+		return kbs;
 	}
-	kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0';
-	i = array_index_nospec(kbs->kb_func, MAX_NR_FUNC);
+
+	func_table[cur] = kbs;
+
+	return __test_and_set_bit(cur, is_kmalloc) ? cur_f : NULL;
+}
+
+int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm)
+{
+	unsigned char kb_func;
+	unsigned long flags;
+	char *kbs;
+	int ret;
+
+	if (get_user(kb_func, &user_kdgkb->kb_func))
+		return -EFAULT;
+
+	kb_func = array_index_nospec(kb_func, MAX_NR_FUNC);
 
 	switch (cmd) {
 	case KDGKBSENT: {
 		/* size should have been a struct member */
 		ssize_t len = sizeof(user_kdgkb->kb_string);
 
+		kbs = kmalloc(len, GFP_KERNEL);
+		if (!kbs)
+			return -ENOMEM;
+
 		spin_lock_irqsave(&func_buf_lock, flags);
-		len = strlcpy(kbs->kb_string, func_table[i] ? : "", len);
+		len = strlcpy(kbs, func_table[kb_func] ? : "", len);
 		spin_unlock_irqrestore(&func_buf_lock, flags);
 
-		ret = copy_to_user(user_kdgkb->kb_string, kbs->kb_string,
-				len + 1) ? -EFAULT : 0;
+		ret = copy_to_user(user_kdgkb->kb_string, kbs, len + 1) ?
+			-EFAULT : 0;
 
-		goto reterr;
+		break;
 	}
 	case KDSKBSENT:
-		if (!perm) {
-			ret = -EPERM;
-			goto reterr;
-		}
+		if (!perm || !capable(CAP_SYS_TTY_CONFIG))
+			return -EPERM;
+
+		kbs = strndup_user(user_kdgkb->kb_string,
+				sizeof(user_kdgkb->kb_string));
+		if (IS_ERR(kbs))
+			return PTR_ERR(kbs);
 
-		fnw = NULL;
-		fnw_sz = 0;
-		/* race aginst other writers */
-		again:
 		spin_lock_irqsave(&func_buf_lock, flags);
-		q = func_table[i];
-
-		/* fj pointer to next entry after 'q' */
-		first_free = funcbufptr + (funcbufsize - funcbufleft);
-		for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++)
-			;
-		if (j < MAX_NR_FUNC)
-			fj = func_table[j];
-		else
-			fj = first_free;
-		/* buffer usage increase by new entry */
-		delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string);
-
-		if (delta <= funcbufleft) { 	/* it fits in current buf */
-		    if (j < MAX_NR_FUNC) {
-			/* make enough space for new entry at 'fj' */
-			memmove(fj + delta, fj, first_free - fj);
-			for (k = j; k < MAX_NR_FUNC; k++)
-			    if (func_table[k])
-				func_table[k] += delta;
-		    }
-		    if (!q)
-		      func_table[i] = fj;
-		    funcbufleft -= delta;
-		} else {			/* allocate a larger buffer */
-		    sz = 256;
-		    while (sz < funcbufsize - funcbufleft + delta)
-		      sz <<= 1;
-		    if (fnw_sz != sz) {
-		      spin_unlock_irqrestore(&func_buf_lock, flags);
-		      kfree(fnw);
-		      fnw = kmalloc(sz, GFP_KERNEL);
-		      fnw_sz = sz;
-		      if (!fnw) {
-			ret = -ENOMEM;
-			goto reterr;
-		      }
-		      goto again;
-		    }
-
-		    if (!q)
-		      func_table[i] = fj;
-		    /* copy data before insertion point to new location */
-		    if (fj > funcbufptr)
-			memmove(fnw, funcbufptr, fj - funcbufptr);
-		    for (k = 0; k < j; k++)
-		      if (func_table[k])
-			func_table[k] = fnw + (func_table[k] - funcbufptr);
-
-		    /* copy data after insertion point to new location */
-		    if (first_free > fj) {
-			memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj);
-			for (k = j; k < MAX_NR_FUNC; k++)
-			  if (func_table[k])
-			    func_table[k] = fnw + (func_table[k] - funcbufptr) + delta;
-		    }
-		    if (funcbufptr != func_buf)
-		      kfree(funcbufptr);
-		    funcbufptr = fnw;
-		    funcbufleft = funcbufleft - delta + sz - funcbufsize;
-		    funcbufsize = sz;
-		}
-		/* finally insert item itself */
-		strcpy(func_table[i], kbs->kb_string);
+		kbs = vt_kdskbsent(kbs, kb_func);
 		spin_unlock_irqrestore(&func_buf_lock, flags);
+
+		ret = 0;
 		break;
 	}
-	ret = 0;
-reterr:
+
 	kfree(kbs);
+
 	return ret;
 }
 
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 5f61b25a9aaa..3813c40f1b48 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -596,12 +596,12 @@ static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up,
 		return con_font_op(vc, &op);
 
 	case PIO_CMAP:
-                if (!perm)
+		if (!perm)
 			return -EPERM;
 		return con_set_cmap(up);
 
 	case GIO_CMAP:
-                return con_get_cmap(up);
+		return con_get_cmap(up);
 
 	case PIO_FONTX:
 		if (!perm)