Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: set flow handler for secondary interrupt controller of 5249
  m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support
  m68knommu: fix dereference of port.tty
  m68knommu: add missing linker __modver section
  m68knommu: fix mis-named variable int set_irq_chip loop
  m68knommu: add optimize memmove() function
  m68k: remove arch specific non-optimized memcmp()
  m68knommu: fix use of un-defined _TIF_WORK_MASK
  m68knommu: Rename m548x_wdt.c to m54xx_wdt.c
  m68knommu: fix m548x_wdt.c compilation after headers renaming
  m68knommu: Remove dependencies on nonexistent M68KNOMMU

5 files changed, 44 insertions, 45 deletions

diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
index 27d1d398e25e..d38706958af6 100644
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
@@ -1,5 +1,5 @@
 config CAN_MSCAN
-	depends on CAN_DEV && (PPC || M68K || M68KNOMMU)
+	depends on CAN_DEV && (PPC || M68K)
 	tristate "Support for Freescale MSCAN based chips"
 	---help---
 	  The Motorola Scalable Controller Area Network (MSCAN) definition
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index be0ebce36e54..de0160e3f8c4 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -262,7 +262,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status)
 
 static void receive_chars(struct m68k_serial *info, unsigned short rx)
 {
-	struct tty_struct *tty = info->port.tty;
+	struct tty_struct *tty = info->tty;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned char ch, flag;
 
@@ -329,7 +329,7 @@ static void transmit_chars(struct m68k_serial *info)
 		goto clear_and_return;
 	}
 
-	if((info->xmit_cnt <= 0) || info->port.tty->stopped) {
+	if((info->xmit_cnt <= 0) || info->tty->stopped) {
 		/* That's peculiar... TX ints off */
 		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
 		goto clear_and_return;
@@ -383,7 +383,7 @@ static void do_softint(struct work_struct *work)
 	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue);
 	struct tty_struct	*tty;
 	
-	tty = info->port.tty;
+	tty = info->tty;
 	if (!tty)
 		return;
 #if 0
@@ -407,7 +407,7 @@ static void do_serial_hangup(struct work_struct *work)
 	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
 	struct tty_struct	*tty;
 	
-	tty = info->port.tty;
+	tty = info->tty;
 	if (!tty)
 		return;
 
@@ -451,8 +451,8 @@ static int startup(struct m68k_serial * info)
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
 #endif
 
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	/*
@@ -486,8 +486,8 @@ static void shutdown(struct m68k_serial * info)
 		info->xmit_buf = 0;
 	}
 
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
 	
 	info->flags &= ~S_INITIALIZED;
 	local_irq_restore(flags);
@@ -553,9 +553,9 @@ static void change_speed(struct m68k_serial *info)
 	unsigned cflag;
 	int	i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!info->tty || !info->tty->termios)
 		return;
-	cflag = info->port.tty->termios->c_cflag;
+	cflag = info->tty->termios->c_cflag;
 	if (!(port = info->port))
 		return;
 
@@ -970,7 +970,6 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
 {
-	int error;
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
 	int retval;
 
@@ -1104,7 +1103,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	tty_ldisc_flush(tty);
 	tty->closing = 0;
 	info->event = 0;
-	info->port.tty = NULL;
+	info->tty = NULL;
 #warning "This is not and has never been valid so fix it"	
 #if 0
 	if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1142,7 +1141,7 @@ void rs_hangup(struct tty_struct *tty)
 	info->event = 0;
 	info->count = 0;
 	info->flags &= ~S_NORMAL_ACTIVE;
-	info->port.tty = NULL;
+	info->tty = NULL;
 	wake_up_interruptible(&info->open_wait);
 }
 
@@ -1261,7 +1260,7 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 
 	info->count++;
 	tty->driver_data = info;
-	info->port.tty = tty;
+	info->tty = tty;
 
 	/*
 	 * Start up serial port
@@ -1338,7 +1337,7 @@ rs68328_init(void)
 	    info = &m68k_soft[i];
 	    info->magic = SERIAL_MAGIC;
 	    info->port = (int) &uart_addr[i];
-	    info->port.tty = NULL;
+	    info->tty = NULL;
 	    info->irq = uart_irqs[i];
 	    info->custom_divisor = 16;
 	    info->close_delay = 50;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2e2400e7322e..31649b7b672f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -862,12 +862,12 @@ config SBC_EPX_C3_WATCHDOG
 
 # M68K Architecture
 
-config M548x_WATCHDOG
-	tristate "MCF548x watchdog support"
+config M54xx_WATCHDOG
+	tristate "MCF54xx watchdog support"
 	depends on M548x
 	help
 	  To compile this driver as a module, choose M here: the
-	  module will be called m548x_wdt.
+	  module will be called m54xx_wdt.
 
 # MIPS Architecture
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index dd776651917c..20e44c4782b3 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -106,7 +106,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
 # M32R Architecture
 
 # M68K Architecture
-obj-$(CONFIG_M548x_WATCHDOG) += m548x_wdt.o
+obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
 
 # MIPS Architecture
 obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
diff --git a/drivers/watchdog/m548x_wdt.c b/drivers/watchdog/m54xx_wdt.c
index cabbcfe1c847..4d43286074aa 100644
--- a/drivers/watchdog/m548x_wdt.c
+++ b/drivers/watchdog/m54xx_wdt.c
@@ -1,7 +1,7 @@
 /*
- * drivers/watchdog/m548x_wdt.c
+ * drivers/watchdog/m54xx_wdt.c
  *
- * Watchdog driver for ColdFire MCF548x processors
+ * Watchdog driver for ColdFire MCF547x & MCF548x processors
  * Copyright 2010 (c) Philippe De Muyter <phdm@macqel.be>
  *
  * Adapted from the IXP4xx watchdog driver, which carries these notices:
@@ -29,8 +29,8 @@
 #include <linux/uaccess.h>
 
 #include <asm/coldfire.h>
-#include <asm/m548xsim.h>
-#include <asm/m548xgpt.h>
+#include <asm/m54xxsim.h>
+#include <asm/m54xxgpt.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static unsigned int heartbeat = 30;	/* (secs) Default is 0.5 minute */
@@ -76,7 +76,7 @@ static void wdt_keepalive(void)
 	__raw_writel(gms0, MCF_MBAR + MCF_GPT_GMS0);
 }
 
-static int m548x_wdt_open(struct inode *inode, struct file *file)
+static int m54xx_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
@@ -86,7 +86,7 @@ static int m548x_wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t m548x_wdt_write(struct file *file, const char *data,
+static ssize_t m54xx_wdt_write(struct file *file, const char *data,
 						size_t len, loff_t *ppos)
 {
 	if (len) {
@@ -112,10 +112,10 @@ static ssize_t m548x_wdt_write(struct file *file, const char *data,
 static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING,
-	.identity	= "Coldfire M548x Watchdog",
+	.identity	= "Coldfire M54xx Watchdog",
 };
 
-static long m548x_wdt_ioctl(struct file *file, unsigned int cmd,
+static long m54xx_wdt_ioctl(struct file *file, unsigned int cmd,
 							 unsigned long arg)
 {
 	int ret = -ENOTTY;
@@ -161,7 +161,7 @@ static long m548x_wdt_ioctl(struct file *file, unsigned int cmd,
 	return ret;
 }
 
-static int m548x_wdt_release(struct inode *inode, struct file *file)
+static int m54xx_wdt_release(struct inode *inode, struct file *file)
 {
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
 		wdt_disable();
@@ -177,45 +177,45 @@ static int m548x_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations m548x_wdt_fops = {
+static const struct file_operations m54xx_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.write		= m548x_wdt_write,
-	.unlocked_ioctl	= m548x_wdt_ioctl,
-	.open		= m548x_wdt_open,
-	.release	= m548x_wdt_release,
+	.write		= m54xx_wdt_write,
+	.unlocked_ioctl	= m54xx_wdt_ioctl,
+	.open		= m54xx_wdt_open,
+	.release	= m54xx_wdt_release,
 };
 
-static struct miscdevice m548x_wdt_miscdev = {
+static struct miscdevice m54xx_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
-	.fops		= &m548x_wdt_fops,
+	.fops		= &m54xx_wdt_fops,
 };
 
-static int __init m548x_wdt_init(void)
+static int __init m54xx_wdt_init(void)
 {
 	if (!request_mem_region(MCF_MBAR + MCF_GPT_GCIR0, 4,
-						"Coldfire M548x Watchdog")) {
+						"Coldfire M54xx Watchdog")) {
 		printk(KERN_WARNING
-				"Coldfire M548x Watchdog : I/O region busy\n");
+				"Coldfire M54xx Watchdog : I/O region busy\n");
 		return -EBUSY;
 	}
 	printk(KERN_INFO "ColdFire watchdog driver is loaded.\n");
 
-	return misc_register(&m548x_wdt_miscdev);
+	return misc_register(&m54xx_wdt_miscdev);
 }
 
-static void __exit m548x_wdt_exit(void)
+static void __exit m54xx_wdt_exit(void)
 {
-	misc_deregister(&m548x_wdt_miscdev);
+	misc_deregister(&m54xx_wdt_miscdev);
 	release_mem_region(MCF_MBAR + MCF_GPT_GCIR0, 4);
 }
 
-module_init(m548x_wdt_init);
-module_exit(m548x_wdt_exit);
+module_init(m54xx_wdt_init);
+module_exit(m54xx_wdt_exit);
 
 MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
-MODULE_DESCRIPTION("Coldfire M548x Watchdog");
+MODULE_DESCRIPTION("Coldfire M54xx Watchdog");
 
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 30s)");