Merge branch 'origin' into devel

Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c

149 files changed, 5050 insertions, 3669 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 83babb0a1df7..c6c816b7ecb5 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -47,6 +47,7 @@ config USB_ARCH_HAS_OHCI
 	default y if CPU_SUBTYPE_SH7720
 	default y if CPU_SUBTYPE_SH7721
 	default y if CPU_SUBTYPE_SH7763
+	default y if CPU_SUBTYPE_SH7786
 	# more:
 	default PCI
 
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index b2ceb4aff233..89299a5ce168 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 obj-$(CONFIG_USB_HWA_HCD)	+= host/
+obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
 
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
 
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 3f3ee1351930..d2747a49b974 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -880,16 +880,19 @@ static int usblp_wwait(struct usblp *usblp, int nonblock)
 		if (rc <= 0)
 			break;
 
-		if (usblp->flags & LP_ABORT) {
-			if (schedule_timeout(msecs_to_jiffies(5000)) == 0) {
+		if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
+			if (usblp->flags & LP_ABORT) {
 				err = usblp_check_status(usblp, err);
 				if (err == 1) {	/* Paper out */
 					rc = -ENOSPC;
 					break;
 				}
+			} else {
+				/* Prod the printer, Gentoo#251237. */
+				mutex_lock(&usblp->mut);
+				usblp_read_status(usblp, usblp->statusbuf);
+				mutex_unlock(&usblp->mut);
 			}
-		} else {
-			schedule();
 		}
 	}
 	set_current_state(TASK_RUNNING);
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 6ec38175a817..73c108d117b4 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -187,7 +187,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	}
 
 	/* this isn't checking for illegal values */
-	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		type = "Ctrl";
 		if (speed == USB_SPEED_HIGH) 	/* uframes per NAK */
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6585f527e381..df3c539f652a 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -104,7 +104,7 @@ MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
 
 #define	MAX_USBFS_BUFFER_SIZE	16384
 
-static inline int connected(struct dev_state *ps)
+static int connected(struct dev_state *ps)
 {
 	return (!list_empty(&ps->list) &&
 			ps->dev->state != USB_STATE_NOTATTACHED);
@@ -248,7 +248,7 @@ static void free_async(struct async *as)
 	kfree(as);
 }
 
-static inline void async_newpending(struct async *as)
+static void async_newpending(struct async *as)
 {
 	struct dev_state *ps = as->ps;
 	unsigned long flags;
@@ -258,7 +258,7 @@ static inline void async_newpending(struct async *as)
 	spin_unlock_irqrestore(&ps->lock, flags);
 }
 
-static inline void async_removepending(struct async *as)
+static void async_removepending(struct async *as)
 {
 	struct dev_state *ps = as->ps;
 	unsigned long flags;
@@ -268,7 +268,7 @@ static inline void async_removepending(struct async *as)
 	spin_unlock_irqrestore(&ps->lock, flags);
 }
 
-static inline struct async *async_getcompleted(struct dev_state *ps)
+static struct async *async_getcompleted(struct dev_state *ps)
 {
 	unsigned long flags;
 	struct async *as = NULL;
@@ -283,7 +283,7 @@ static inline struct async *async_getcompleted(struct dev_state *ps)
 	return as;
 }
 
-static inline struct async *async_getpending(struct dev_state *ps,
+static struct async *async_getpending(struct dev_state *ps,
 					     void __user *userurb)
 {
 	unsigned long flags;
@@ -302,7 +302,7 @@ static inline struct async *async_getpending(struct dev_state *ps,
 
 static void snoop_urb(struct urb *urb, void __user *userurb)
 {
-	int j;
+	unsigned j;
 	unsigned char *data = urb->transfer_buffer;
 
 	if (!usbfs_snoop)
@@ -311,9 +311,9 @@ static void snoop_urb(struct urb *urb, void __user *userurb)
 	dev_info(&urb->dev->dev, "direction=%s\n",
 			usb_urb_dir_in(urb) ? "IN" : "OUT");
 	dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
-	dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n",
+	dev_info(&urb->dev->dev, "transfer_buffer_length=%u\n",
 		 urb->transfer_buffer_length);
-	dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length);
+	dev_info(&urb->dev->dev, "actual_length=%u\n", urb->actual_length);
 	dev_info(&urb->dev->dev, "data: ");
 	for (j = 0; j < urb->transfer_buffer_length; ++j)
 		printk("%02x ", data[j]);
@@ -376,7 +376,7 @@ static void destroy_async_on_interface(struct dev_state *ps,
 	destroy_async(ps, &hitlist);
 }
 
-static inline void destroy_all_async(struct dev_state *ps)
+static void destroy_all_async(struct dev_state *ps)
 {
 	destroy_async(ps, &ps->async_pending);
 }
@@ -525,7 +525,8 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
 {
 	int ret = 0;
 
-	if (ps->dev->state != USB_STATE_ADDRESS
+	if (ps->dev->state != USB_STATE_UNAUTHENTICATED
+	 && ps->dev->state != USB_STATE_ADDRESS
 	 && ps->dev->state != USB_STATE_CONFIGURED)
 		return -EHOSTUNREACH;
 	if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index e1710f260b4f..40dee2ac0133 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -66,7 +66,7 @@ static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr,
 	struct ep_device *ep = to_ep_device(dev);
 	char *type = "unknown";
 
-	switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(ep->desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		type = "Control";
 		break;
@@ -94,7 +94,7 @@ static ssize_t show_ep_interval(struct device *dev,
 
 	in = (ep->desc->bEndpointAddress & USB_DIR_IN);
 
-	switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(ep->desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		if (ep->udev->speed == USB_SPEED_HIGH) 	/* uframes per NAK */
 			interval = ep->desc->bInterval;
@@ -131,10 +131,9 @@ static ssize_t show_ep_direction(struct device *dev,
 	struct ep_device *ep = to_ep_device(dev);
 	char *direction;
 
-	if ((ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-			USB_ENDPOINT_XFER_CONTROL)
+	if (usb_endpoint_xfer_control(ep->desc))
 		direction = "both";
-	else if (ep->desc->bEndpointAddress & USB_DIR_IN)
+	else if (usb_endpoint_dir_in(ep->desc))
 		direction = "in";
 	else
 		direction = "out";
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 3c711db55d86..81fa8506825d 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -279,9 +279,9 @@ static const u8 hs_rh_config_descriptor [] = {
  * helper routine for returning string descriptors in UTF-16LE
  * input can actually be ISO-8859-1; ASCII is its 7-bit subset
  */
-static int ascii2utf (char *s, u8 *utf, int utfmax)
+static unsigned ascii2utf(char *s, u8 *utf, int utfmax)
 {
-	int retval;
+	unsigned retval;
 
 	for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
 		*utf++ = *s++;
@@ -304,19 +304,15 @@ static int ascii2utf (char *s, u8 *utf, int utfmax)
  * Produces either a manufacturer, product or serial number string for the
  * virtual root hub device.
  */
-static int rh_string (
-	int		id,
-	struct usb_hcd	*hcd,
-	u8		*data,
-	int		len
-) {
+static unsigned rh_string(int id, struct usb_hcd *hcd, u8 *data, unsigned len)
+{
 	char buf [100];
 
 	// language ids
 	if (id == 0) {
 		buf[0] = 4;    buf[1] = 3;	/* 4 bytes string data */
 		buf[2] = 0x09; buf[3] = 0x04;	/* MSFT-speak for "en-us" */
-		len = min (len, 4);
+		len = min_t(unsigned, len, 4);
 		memcpy (data, buf, len);
 		return len;
 
@@ -332,10 +328,7 @@ static int rh_string (
 	} else if (id == 3) {
 		snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
 			init_utsname()->release, hcd->driver->description);
-
-	// unsupported IDs --> "protocol stall"
-	} else
-		return -EPIPE;
+	}
 
 	switch (len) {		/* All cases fall through */
 	default:
@@ -360,9 +353,8 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 	u8		tbuf [sizeof (struct usb_hub_descriptor)]
 		__attribute__((aligned(4)));
 	const u8	*bufp = tbuf;
-	int		len = 0;
+	unsigned	len = 0;
 	int		status;
-	int		n;
 	u8		patch_wakeup = 0;
 	u8		patch_protocol = 0;
 
@@ -456,10 +448,11 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 				patch_wakeup = 1;
 			break;
 		case USB_DT_STRING << 8:
-			n = rh_string (wValue & 0xff, hcd, ubuf, wLength);
-			if (n < 0)
+			if ((wValue & 0xff) < 4)
+				urb->actual_length = rh_string(wValue & 0xff,
+						hcd, ubuf, wLength);
+			else /* unsupported IDs --> "protocol stall" */
 				goto error;
-			urb->actual_length = n;
 			break;
 		default:
 			goto error;
@@ -629,7 +622,7 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
 {
 	int		retval;
 	unsigned long	flags;
-	int		len = 1 + (urb->dev->maxchild / 8);
+	unsigned	len = 1 + (urb->dev->maxchild / 8);
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
 	if (hcd->status_urb || urb->transfer_buffer_length < len) {
@@ -901,7 +894,7 @@ static int register_root_hub(struct usb_hcd *hcd)
 
 	mutex_lock(&usb_bus_list_lock);
 
-	usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+	usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
 	retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
 	if (retval != sizeof usb_dev->descriptor) {
 		mutex_unlock(&usb_bus_list_lock);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index cd50d86029e7..be86ae3f4088 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -392,7 +392,7 @@ static void hub_irq(struct urb *urb)
 {
 	struct usb_hub *hub = urb->context;
 	int status = urb->status;
-	int i;
+	unsigned i;
 	unsigned long bits;
 
 	switch (status) {
@@ -1305,6 +1305,7 @@ void usb_set_device_state(struct usb_device *udev,
 		recursively_mark_NOTATTACHED(udev);
 	spin_unlock_irqrestore(&device_state_lock, flags);
 }
+EXPORT_SYMBOL_GPL(usb_set_device_state);
 
 /*
  * WUSB devices are simple: they have no hubs behind, so the mapping
@@ -2471,20 +2472,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 */
 	switch (udev->speed) {
 	case USB_SPEED_VARIABLE:	/* fixed at 512 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
 		break;
 	case USB_SPEED_HIGH:		/* fixed at 64 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
 		break;
 	case USB_SPEED_FULL:		/* 8, 16, 32, or 64 */
 		/* to determine the ep0 maxpacket size, try to read
 		 * the device descriptor to get bMaxPacketSize0 and
 		 * then correct our initial guess.
 		 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
 		break;
 	case USB_SPEED_LOW:		/* fixed at 8 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
 		break;
 	default:
 		goto fail;
@@ -3392,10 +3393,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		udev->descriptor = descriptor;	/* for disconnect() calls */
 		goto re_enumerate;
   	}
-  
+
+	/* Restore the device's previous configuration */
 	if (!udev->actconfig)
 		goto done;
-
 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			USB_REQ_SET_CONFIGURATION, 0,
 			udev->actconfig->desc.bConfigurationValue, 0,
@@ -3408,16 +3409,25 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
   	}
 	usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
+	/* Put interfaces back into the same altsettings as before.
+	 * Don't bother to send the Set-Interface request for interfaces
+	 * that were already in altsetting 0; besides being unnecessary,
+	 * many devices can't handle it.  Instead just reset the host-side
+	 * endpoint state.
+	 */
 	for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = udev->actconfig->interface[i];
 		struct usb_interface_descriptor *desc;
 
-		/* set_interface resets host side toggle even
-		 * for altsetting zero.  the interface may have no driver.
-		 */
 		desc = &intf->cur_altsetting->desc;
-		ret = usb_set_interface(udev, desc->bInterfaceNumber,
-			desc->bAlternateSetting);
+		if (desc->bAlternateSetting == 0) {
+			usb_disable_interface(udev, intf, true);
+			usb_enable_interface(udev, intf, true);
+			ret = 0;
+		} else {
+			ret = usb_set_interface(udev, desc->bInterfaceNumber,
+					desc->bAlternateSetting);
+		}
 		if (ret < 0) {
 			dev_err(&udev->dev, "failed to restore interface %d "
 				"altsetting %d (error=%d)\n",
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 49e7f56e0d7f..30a0690f3683 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -59,7 +59,7 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
 		retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status);
 
 		dev_dbg(&urb->dev->dev,
-			"%s timed out on ep%d%s len=%d/%d\n",
+			"%s timed out on ep%d%s len=%u/%u\n",
 			current->comm,
 			usb_endpoint_num(&urb->ep->desc),
 			usb_urb_dir_in(urb) ? "in" : "out",
@@ -804,18 +804,16 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 			dev_err(&dev->dev,
 				"string descriptor 0 read error: %d\n",
 				err);
-			goto errout;
 		} else if (err < 4) {
 			dev_err(&dev->dev, "string descriptor 0 too short\n");
-			err = -EINVAL;
-			goto errout;
 		} else {
-			dev->have_langid = 1;
 			dev->string_langid = tbuf[2] | (tbuf[3] << 8);
 			/* always use the first langid listed */
 			dev_dbg(&dev->dev, "default language 0x%04x\n",
 				dev->string_langid);
 		}
+
+		dev->have_langid = 1;
 	}
 
 	err = usb_string_sub(dev, dev->string_langid, index, tbuf);
@@ -1719,7 +1717,8 @@ free_interfaces:
 	}
 	kfree(new_interfaces);
 
-	if (cp->string == NULL)
+	if (cp->string == NULL &&
+			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
 		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
 
 	/* Now that all the interfaces are set up, register them
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index c070b34b669d..ab93918d9207 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -54,6 +54,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
 	  USB_QUIRK_STRING_FETCH_255 },
 
+	/* Saitek Cyborg Gold Joystick */
+	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 4cc2456ef3be..c66789197927 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/usb.h>
+#include <linux/usb/quirks.h>
 #include "usb.h"
 
 /* Active configuration fields */
@@ -813,7 +814,8 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf)
 	if (intf->sysfs_files_created || intf->unregistering)
 		return 0;
 
-	if (alt->string == NULL)
+	if (alt->string == NULL &&
+			!(udev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
 		alt->string = usb_cache_string(udev, alt->desc.iInterface);
 	if (alt->string)
 		retval = device_create_file(&intf->dev, &dev_attr_interface);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 58bc5e3c2560..3376055f36e7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -295,7 +295,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	if (!urb || urb->hcpriv || !urb->complete)
 		return -EINVAL;
 	dev = urb->dev;
-	if ((!dev) || (dev->state < USB_STATE_DEFAULT))
+	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
 		return -ENODEV;
 
 	/* For now, get the endpoint from the pipe.  Eventually drivers
@@ -370,7 +370,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	}
 
 	/* the I/O buffer must be mapped/unmapped, except when length=0 */
-	if (urb->transfer_buffer_length < 0)
+	if (urb->transfer_buffer_length > INT_MAX)
 		return -EMSGSIZE;
 
 #ifdef DEBUG
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index e55fef52a5dc..770b3eaa9184 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -254,6 +254,7 @@ config USB_PXA25X_SMALL
 config USB_GADGET_PXA27X
 	boolean "PXA 27x"
 	depends on ARCH_PXA && PXA27x
+	select USB_OTG_UTILS
 	help
 	   Intel's PXA 27x series XScale ARM v5TE processors include
 	   an integrated full speed USB 1.1 device controller.
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index abf8192f89e8..826f3adde5d8 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -551,7 +551,7 @@ udc_alloc_request(struct usb_ep *usbep, gfp_t gfp)
 		dma_desc->status = AMD_ADDBITS(dma_desc->status,
 						UDC_DMA_STP_STS_BS_HOST_BUSY,
 						UDC_DMA_STP_STS_BS);
-		dma_desc->bufptr = __constant_cpu_to_le32(DMA_DONT_USE);
+		dma_desc->bufptr = cpu_to_le32(DMA_DONT_USE);
 		req->td_data = dma_desc;
 		req->td_data_last = NULL;
 		req->chain_len = 1;
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 65b03e3445a1..c22fab164113 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1017,7 +1017,7 @@ static struct usb_endpoint_descriptor usba_ep0_desc = {
 	.bDescriptorType = USB_DT_ENDPOINT,
 	.bEndpointAddress = 0,
 	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-	.wMaxPacketSize = __constant_cpu_to_le16(64),
+	.wMaxPacketSize = cpu_to_le16(64),
 	/* FIXME: I have no idea what to put here */
 	.bInterval = 1,
 };
@@ -1207,21 +1207,21 @@ static int do_test_mode(struct usba_udc *udc)
 /* Avoid overly long expressions */
 static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
 {
-	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
+	if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
 		return true;
 	return false;
 }
 
 static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
 {
-	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
+	if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE))
 		return true;
 	return false;
 }
 
 static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
 {
-	if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
+	if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT))
 		return true;
 	return false;
 }
@@ -1239,7 +1239,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 			status = cpu_to_le16(udc->devstatus);
 		} else if (crq->bRequestType
 				== (USB_DIR_IN | USB_RECIP_INTERFACE)) {
-			status = __constant_cpu_to_le16(0);
+			status = cpu_to_le16(0);
 		} else if (crq->bRequestType
 				== (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
 			struct usba_ep *target;
@@ -1250,12 +1250,12 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 
 			status = 0;
 			if (is_stalled(udc, target))
-				status |= __constant_cpu_to_le16(1);
+				status |= cpu_to_le16(1);
 		} else
 			goto delegate;
 
 		/* Write directly to the FIFO. No queueing is done. */
-		if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
+		if (crq->wLength != cpu_to_le16(sizeof(status)))
 			goto stall;
 		ep->state = DATA_STAGE_IN;
 		__raw_writew(status, ep->fifo);
@@ -1274,7 +1274,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
 			struct usba_ep *target;
 
-			if (crq->wLength != __constant_cpu_to_le16(0)
+			if (crq->wLength != cpu_to_le16(0)
 					|| !feature_is_ep_halt(crq))
 				goto stall;
 			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
@@ -1308,7 +1308,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
 			struct usba_ep *target;
 
-			if (crq->wLength != __constant_cpu_to_le16(0)
+			if (crq->wLength != cpu_to_le16(0)
 					|| !feature_is_ep_halt(crq))
 				goto stall;
 
@@ -1514,7 +1514,7 @@ restart:
 			 */
 			ep->state = DATA_STAGE_IN;
 		} else {
-			if (crq.crq.wLength != __constant_cpu_to_le16(0))
+			if (crq.crq.wLength != cpu_to_le16(0))
 				ep->state = DATA_STAGE_OUT;
 			else
 				ep->state = STATUS_STAGE_IN;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 5495b171cf29..928137d3dbdc 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -66,7 +66,7 @@ static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 
 	.bDeviceClass =		USB_CLASS_COMM,
 	.bDeviceSubClass =	0,
@@ -74,8 +74,8 @@ static struct usb_device_descriptor device_desc = {
 	/* .bMaxPacketSize0 = f(hardware) */
 
 	/* Vendor and product id can be overridden by module parameters.  */
-	.idVendor =		__constant_cpu_to_le16(CDC_VENDOR_NUM),
-	.idProduct =		__constant_cpu_to_le16(CDC_PRODUCT_NUM),
+	.idVendor =		cpu_to_le16(CDC_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(CDC_PRODUCT_NUM),
 	/* .bcdDevice = f(hardware) */
 	/* .iManufacturer = DYNAMIC */
 	/* .iProduct = DYNAMIC */
@@ -193,7 +193,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 				gadget->name,
 				cdc_config_driver.label);
 		device_desc.bcdDevice =
-			__constant_cpu_to_le16(0x0300 | 0x0099);
+			cpu_to_le16(0x0300 | 0x0099);
 	}
 
 
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index bebf911c7e5f..22c65960c429 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -56,7 +56,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
@@ -2626,7 +2625,7 @@ static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
 	INIT_LIST_HEAD(&udc->gadget.ep_list);
 	udc->gadget.ep0 = NULL;
 
-	strcpy(udc->gadget.dev.bus_id, "gadget");
+	dev_set_name(&udc->gadget.dev, "gadget");
 	udc->gadget.dev.dma_mask = dev->dma_mask;
 	udc->gadget.dev.parent   = dev;
 	udc->gadget.dev.release  = udc_release;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5d11c291f1ad..59e85234fa0a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -149,16 +149,17 @@ done:
 int usb_function_deactivate(struct usb_function *function)
 {
 	struct usb_composite_dev	*cdev = function->config->cdev;
+	unsigned long			flags;
 	int				status = 0;
 
-	spin_lock(&cdev->lock);
+	spin_lock_irqsave(&cdev->lock, flags);
 
 	if (cdev->deactivations == 0)
 		status = usb_gadget_disconnect(cdev->gadget);
 	if (status == 0)
 		cdev->deactivations++;
 
-	spin_unlock(&cdev->lock);
+	spin_unlock_irqrestore(&cdev->lock, flags);
 	return status;
 }
 
@@ -1013,7 +1014,7 @@ composite_suspend(struct usb_gadget *gadget)
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
 	struct usb_function		*f;
 
-	/* REVISIT:  should we have config and device level
+	/* REVISIT:  should we have config level
 	 * suspend/resume callbacks?
 	 */
 	DBG(cdev, "suspend\n");
@@ -1023,6 +1024,8 @@ composite_suspend(struct usb_gadget *gadget)
 				f->suspend(f);
 		}
 	}
+	if (composite->suspend)
+		composite->suspend(cdev);
 }
 
 static void
@@ -1031,10 +1034,12 @@ composite_resume(struct usb_gadget *gadget)
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
 	struct usb_function		*f;
 
-	/* REVISIT:  should we have config and device level
+	/* REVISIT:  should we have config level
 	 * suspend/resume callbacks?
 	 */
 	DBG(cdev, "resume\n");
+	if (composite->resume)
+		composite->resume(cdev);
 	if (cdev->config) {
 		list_for_each_entry(f, &cdev->config->functions, list) {
 			if (f->resume)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 9064696636ac..a56b24d305f8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1437,7 +1437,7 @@ restart:
 					}
 					if (urb->transfer_buffer_length > 1)
 						buf [1] = 0;
-					urb->actual_length = min (2,
+					urb->actual_length = min_t(u32, 2,
 						urb->transfer_buffer_length);
 					value = 0;
 					status = 0;
@@ -1626,7 +1626,7 @@ static int dummy_hub_control (
 		hub_descriptor ((struct usb_hub_descriptor *) buf);
 		break;
 	case GetHubStatus:
-		*(__le32 *) buf = __constant_cpu_to_le32 (0);
+		*(__le32 *) buf = cpu_to_le32 (0);
 		break;
 	case GetPortStatus:
 		if (wIndex != 1)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index a36b1175b18d..cd0914ec898e 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -148,7 +148,7 @@ ep_matches (
 			return 0;
 
 		/* BOTH:  "high bandwidth" works only at high speed */
-		if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) {
+		if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
 			if (!gadget->is_dualspeed)
 				return 0;
 			/* configure your hardware with enough buffering!! */
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 37252d0012a7..d006dc652e02 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -156,7 +156,7 @@ static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
+	.bcdUSB =		cpu_to_le16 (0x0200),
 
 	.bDeviceClass =		USB_CLASS_COMM,
 	.bDeviceSubClass =	0,
@@ -167,8 +167,8 @@ static struct usb_device_descriptor device_desc = {
 	 * we support.  (As does bNumConfigurations.)  These values can
 	 * also be overridden by module parameters.
 	 */
-	.idVendor =		__constant_cpu_to_le16 (CDC_VENDOR_NUM),
-	.idProduct =		__constant_cpu_to_le16 (CDC_PRODUCT_NUM),
+	.idVendor =		cpu_to_le16 (CDC_VENDOR_NUM),
+	.idProduct =		cpu_to_le16 (CDC_PRODUCT_NUM),
 	/* .bcdDevice = f(hardware) */
 	/* .iManufacturer = DYNAMIC */
 	/* .iProduct = DYNAMIC */
@@ -318,7 +318,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 				gadget->name,
 				eth_config_driver.label);
 		device_desc.bcdDevice =
-			__constant_cpu_to_le16(0x0300 | 0x0099);
+			cpu_to_le16(0x0300 | 0x0099);
 	}
 
 
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index c1d34df0b157..7953948bfe4a 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -125,7 +125,7 @@ static struct usb_cdc_header_desc acm_header_desc __initdata = {
 	.bLength =		sizeof(acm_header_desc),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
-	.bcdCDC =		__constant_cpu_to_le16(0x0110),
+	.bcdCDC =		cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_call_mgmt_descriptor
@@ -159,7 +159,7 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc __initdata = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
 	.bInterval =		1 << GS_LOG2_NOTIFY_INTERVAL,
 };
 
@@ -197,7 +197,7 @@ static struct usb_endpoint_descriptor acm_hs_notify_desc __initdata = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
 	.bInterval =		GS_LOG2_NOTIFY_INTERVAL+4,
 };
 
@@ -205,14 +205,14 @@ static struct usb_endpoint_descriptor acm_hs_in_desc __initdata = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor acm_hs_out_desc __initdata = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *acm_hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 4ae579948e54..ecf5bdd0ae06 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -130,7 +130,7 @@ static struct usb_cdc_header_desc ecm_header_desc __initdata = {
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
 
-	.bcdCDC =		__constant_cpu_to_le16(0x0110),
+	.bcdCDC =		cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_union_desc ecm_union_desc __initdata = {
@@ -148,9 +148,9 @@ static struct usb_cdc_ether_desc ecm_desc __initdata = {
 
 	/* this descriptor actually adds value, surprise! */
 	/* .iMACAddress = DYNAMIC */
-	.bmEthernetStatistics =	__constant_cpu_to_le32(0), /* no statistics */
-	.wMaxSegmentSize =	__constant_cpu_to_le16(ETH_FRAME_LEN),
-	.wNumberMCFilters =	__constant_cpu_to_le16(0),
+	.bmEthernetStatistics =	cpu_to_le32(0), /* no statistics */
+	.wMaxSegmentSize =	cpu_to_le16(ETH_FRAME_LEN),
+	.wNumberMCFilters =	cpu_to_le16(0),
 	.bNumberPowerFilters =	0,
 };
 
@@ -192,7 +192,7 @@ static struct usb_endpoint_descriptor fs_ecm_notify_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(ECM_STATUS_BYTECOUNT),
+	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
 	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
 };
 
@@ -236,7 +236,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(ECM_STATUS_BYTECOUNT),
+	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
 	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
 };
 static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = {
@@ -245,7 +245,7 @@ static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = {
@@ -254,7 +254,7 @@ static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_OUT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *ecm_hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 8affe1dfc2c1..eb6ddfc20857 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -100,7 +100,7 @@ static struct usb_endpoint_descriptor hs_loop_source_desc = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_loop_sink_desc = {
@@ -108,7 +108,7 @@ static struct usb_endpoint_descriptor hs_loop_sink_desc = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_loopback_descs[] = {
@@ -359,7 +359,7 @@ static struct usb_configuration loopback_driver = {
  * loopback_add - add a loopback testing configuration to a device
  * @cdev: the device to support the loopback configuration
  */
-int __init loopback_add(struct usb_composite_dev *cdev)
+int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
 {
 	int id;
 
@@ -372,6 +372,10 @@ int __init loopback_add(struct usb_composite_dev *cdev)
 	loopback_intf.iInterface = id;
 	loopback_driver.iConfiguration = id;
 
+	/* support autoresume for remote wakeup testing */
+	if (autoresume)
+		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+
 	/* support OTG systems */
 	if (gadget_is_otg(cdev->gadget)) {
 		loopback_driver.descriptors = otg_desc;
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 38aa896cc5db..46d6266f30ec 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -123,7 +123,7 @@ static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = {
 	.bLength		= sizeof(obex_cdc_header_desc),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
 	.bDescriptorSubType	= USB_CDC_HEADER_TYPE,
-	.bcdCDC			= __constant_cpu_to_le16(0x0120),
+	.bcdCDC			= cpu_to_le16(0x0120),
 };
 
 static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = {
@@ -138,7 +138,7 @@ static struct usb_cdc_obex_desc obex_desc __initdata = {
 	.bLength		= sizeof(obex_desc),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
 	.bDescriptorSubType	= USB_CDC_OBEX_TYPE,
-	.bcdVersion		= __constant_cpu_to_le16(0x0100),
+	.bcdVersion		= cpu_to_le16(0x0100),
 };
 
 /* High-Speed Support */
@@ -149,7 +149,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = {
 
 	.bEndpointAddress	= USB_DIR_OUT,
 	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize		= __constant_cpu_to_le16(512),
+	.wMaxPacketSize		= cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
@@ -158,7 +158,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
 
 	.bEndpointAddress	= USB_DIR_IN,
 	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize		= __constant_cpu_to_le16(512),
+	.wMaxPacketSize		= cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index c0916c7b217e..c1abeb89b413 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -79,7 +79,7 @@ pn_header_desc = {
 	.bLength =		sizeof pn_header_desc,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
-	.bcdCDC =		__constant_cpu_to_le16(0x0110),
+	.bcdCDC =		cpu_to_le16(0x0110),
 };
 
 static const struct usb_cdc_header_desc
@@ -87,7 +87,7 @@ pn_phonet_desc = {
 	.bLength =		sizeof pn_phonet_desc,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_PHONET_TYPE,
-	.bcdCDC =		__constant_cpu_to_le16(0x1505), /* ??? */
+	.bcdCDC =		cpu_to_le16(0x1505), /* ??? */
 };
 
 static struct usb_cdc_union_desc
@@ -138,7 +138,7 @@ pn_hs_sink_desc = {
 
 	.bEndpointAddress =	USB_DIR_OUT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor
@@ -157,7 +157,7 @@ pn_hs_source_desc = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *fs_pn_function[] = {
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 3a8bb53fc473..3279a4726042 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -137,7 +137,7 @@ static struct usb_cdc_header_desc header_desc __initdata = {
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
 
-	.bcdCDC =		__constant_cpu_to_le16(0x0110),
+	.bcdCDC =		cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor __initdata = {
@@ -187,7 +187,7 @@ static struct usb_endpoint_descriptor fs_notify_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(STATUS_BYTECOUNT),
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
 	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
 };
 
@@ -230,7 +230,7 @@ static struct usb_endpoint_descriptor hs_notify_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(STATUS_BYTECOUNT),
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
 	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
 };
 static struct usb_endpoint_descriptor hs_in_desc __initdata = {
@@ -239,7 +239,7 @@ static struct usb_endpoint_descriptor hs_in_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_out_desc __initdata = {
@@ -248,7 +248,7 @@ static struct usb_endpoint_descriptor hs_out_desc __initdata = {
 
 	.bEndpointAddress =	USB_DIR_OUT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *eth_hs_function[] __initdata = {
@@ -437,7 +437,7 @@ invalid:
 		DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n",
 			ctrl->bRequestType, ctrl->bRequest,
 			w_value, w_index, w_length);
-		req->zero = 0;
+		req->zero = (value < w_length);
 		req->length = value;
 		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
 		if (value < 0)
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index fe5674db344b..db0aa93606ef 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -89,14 +89,14 @@ static struct usb_endpoint_descriptor gser_hs_in_desc __initdata = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor gser_hs_out_desc __initdata = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *gser_hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index dc84d26d2835..bffe91d525f9 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -59,7 +59,6 @@ struct f_sourcesink {
 
 	struct usb_ep		*in_ep;
 	struct usb_ep		*out_ep;
-	struct timer_list	resume;
 };
 
 static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
@@ -67,10 +66,6 @@ static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
 	return container_of(f, struct f_sourcesink, function);
 }
 
-static unsigned autoresume;
-module_param(autoresume, uint, 0);
-MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
-
 static unsigned pattern;
 module_param(pattern, uint, 0);
 MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 ");
@@ -118,7 +113,7 @@ static struct usb_endpoint_descriptor hs_source_desc = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_sink_desc = {
@@ -126,7 +121,7 @@ static struct usb_endpoint_descriptor hs_sink_desc = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_source_sink_descs[] = {
@@ -155,21 +150,6 @@ static struct usb_gadget_strings *sourcesink_strings[] = {
 
 /*-------------------------------------------------------------------------*/
 
-static void sourcesink_autoresume(unsigned long _c)
-{
-	struct usb_composite_dev *cdev = (void *)_c;
-	struct usb_gadget	*g = cdev->gadget;
-
-	/* Normally the host would be woken up for something
-	 * more significant than just a timer firing; likely
-	 * because of some direct user request.
-	 */
-	if (g->speed != USB_SPEED_UNKNOWN) {
-		int status = usb_gadget_wakeup(g);
-		DBG(cdev, "%s --> %d\n", __func__, status);
-	}
-}
-
 static int __init
 sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
 {
@@ -198,9 +178,6 @@ autoconf_fail:
 		goto autoconf_fail;
 	ss->out_ep->driver_data = cdev;	/* claim */
 
-	setup_timer(&ss->resume, sourcesink_autoresume,
-			(unsigned long) c->cdev);
-
 	/* support high speed hardware */
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		hs_source_desc.bEndpointAddress =
@@ -359,7 +336,6 @@ static void disable_source_sink(struct f_sourcesink *ss)
 
 	cdev = ss->function.config->cdev;
 	disable_endpoints(cdev, ss->in_ep, ss->out_ep);
-	del_timer(&ss->resume);
 	VDBG(cdev, "%s disabled\n", ss->function.name);
 }
 
@@ -426,30 +402,6 @@ static void sourcesink_disable(struct usb_function *f)
 	disable_source_sink(ss);
 }
 
-static void sourcesink_suspend(struct usb_function *f)
-{
-	struct f_sourcesink	*ss = func_to_ss(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
-
-	if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
-		return;
-
-	if (autoresume) {
-		mod_timer(&ss->resume, jiffies + (HZ * autoresume));
-		DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
-	} else
-		DBG(cdev, "%s\n", __func__);
-}
-
-static void sourcesink_resume(struct usb_function *f)
-{
-	struct f_sourcesink	*ss = func_to_ss(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
-
-	DBG(cdev, "%s\n", __func__);
-	del_timer(&ss->resume);
-}
-
 /*-------------------------------------------------------------------------*/
 
 static int __init sourcesink_bind_config(struct usb_configuration *c)
@@ -467,8 +419,6 @@ static int __init sourcesink_bind_config(struct usb_configuration *c)
 	ss->function.unbind = sourcesink_unbind;
 	ss->function.set_alt = sourcesink_set_alt;
 	ss->function.disable = sourcesink_disable;
-	ss->function.suspend = sourcesink_suspend;
-	ss->function.resume = sourcesink_resume;
 
 	status = usb_add_function(c, &ss->function);
 	if (status)
@@ -559,7 +509,7 @@ static struct usb_configuration sourcesink_driver = {
  * sourcesink_add - add a source/sink testing configuration to a device
  * @cdev: the device to support the configuration
  */
-int __init sourcesink_add(struct usb_composite_dev *cdev)
+int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume)
 {
 	int id;
 
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index fe1832875771..a9c98fdb626d 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -108,7 +108,7 @@ static struct usb_cdc_header_desc mdlm_header_desc __initdata = {
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
 
-	.bcdCDC =		__constant_cpu_to_le16(0x0110),
+	.bcdCDC =		cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_mdlm_desc mdlm_desc __initdata = {
@@ -116,7 +116,7 @@ static struct usb_cdc_mdlm_desc mdlm_desc __initdata = {
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_MDLM_TYPE,
 
-	.bcdVersion =		__constant_cpu_to_le16(0x0100),
+	.bcdVersion =		cpu_to_le16(0x0100),
 	.bGUID = {
 		0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
 		0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
@@ -144,9 +144,9 @@ static struct usb_cdc_ether_desc ether_desc __initdata = {
 
 	/* this descriptor actually adds value, surprise! */
 	/* .iMACAddress = DYNAMIC */
-	.bmEthernetStatistics =	__constant_cpu_to_le32(0), /* no statistics */
-	.wMaxSegmentSize =	__constant_cpu_to_le16(ETH_FRAME_LEN),
-	.wNumberMCFilters =	__constant_cpu_to_le16(0),
+	.bmEthernetStatistics =	cpu_to_le32(0), /* no statistics */
+	.wMaxSegmentSize =	cpu_to_le16(ETH_FRAME_LEN),
+	.wNumberMCFilters =	cpu_to_le16(0),
 	.bNumberPowerFilters =	0,
 };
 
@@ -186,7 +186,7 @@ static struct usb_endpoint_descriptor hs_subset_in_desc __initdata = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_subset_out_desc __initdata = {
@@ -194,7 +194,7 @@ static struct usb_endpoint_descriptor hs_subset_out_desc __initdata = {
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_eth_function[] __initdata = {
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 1ab9dac7e12d..5c030b080d4c 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -847,13 +847,13 @@ device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 
 	/* The next three values can be overridden by module parameters */
-	.idVendor =		__constant_cpu_to_le16(DRIVER_VENDOR_ID),
-	.idProduct =		__constant_cpu_to_le16(DRIVER_PRODUCT_ID),
-	.bcdDevice =		__constant_cpu_to_le16(0xffff),
+	.idVendor =		cpu_to_le16(DRIVER_VENDOR_ID),
+	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_ID),
+	.bcdDevice =		cpu_to_le16(0xffff),
 
 	.iManufacturer =	STRING_MANUFACTURER,
 	.iProduct =		STRING_PRODUCT,
@@ -926,7 +926,7 @@ fs_intr_in_desc = {
 
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(2),
+	.wMaxPacketSize =	cpu_to_le16(2),
 	.bInterval =		32,	// frames -> 32 ms
 };
 
@@ -954,7 +954,7 @@ dev_qualifier = {
 	.bLength =		sizeof dev_qualifier,
 	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
 
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 
 	.bNumConfigurations =	1,
@@ -967,7 +967,7 @@ hs_bulk_in_desc = {
 
 	/* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor
@@ -977,7 +977,7 @@ hs_bulk_out_desc = {
 
 	/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512),
+	.wMaxPacketSize =	cpu_to_le16(512),
 	.bInterval =		1,	// NAK every 1 uframe
 };
 
@@ -988,7 +988,7 @@ hs_intr_in_desc = {
 
 	/* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	__constant_cpu_to_le16(2),
+	.wMaxPacketSize =	cpu_to_le16(2),
 	.bInterval =		9,	// 2**(9-1) = 256 uframes -> 32 ms
 };
 
@@ -1711,7 +1711,9 @@ static int do_write(struct fsg_dev *fsg)
 		curlun->sense_data = SS_WRITE_PROTECTED;
 		return -EINVAL;
 	}
+	spin_lock(&curlun->filp->f_lock);
 	curlun->filp->f_flags &= ~O_SYNC;	// Default is not to wait
+	spin_unlock(&curlun->filp->f_lock);
 
 	/* Get the starting Logical Block Address and check that it's
 	 * not too big */
@@ -1728,8 +1730,11 @@ static int do_write(struct fsg_dev *fsg)
 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 			return -EINVAL;
 		}
-		if (fsg->cmnd[1] & 0x08)	// FUA
+		if (fsg->cmnd[1] & 0x08) {	// FUA
+			spin_lock(&curlun->filp->f_lock);
 			curlun->filp->f_flags |= O_SYNC;
+			spin_unlock(&curlun->filp->f_lock);
+		}
 	}
 	if (lba >= curlun->num_sectors) {
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
@@ -2646,7 +2651,7 @@ static int send_status(struct fsg_dev *fsg)
 		struct bulk_cs_wrap	*csw = bh->buf;
 
 		/* Store and send the Bulk-only CSW */
-		csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG);
+		csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
 		csw->Tag = fsg->tag;
 		csw->Residue = cpu_to_le32(fsg->residue);
 		csw->Status = status;
@@ -3089,7 +3094,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 
 	/* Is the CBW valid? */
 	if (req->actual != USB_BULK_CB_WRAP_LEN ||
-			cbw->Signature != __constant_cpu_to_le32(
+			cbw->Signature != cpu_to_le32(
 				USB_BULK_CB_SIG)) {
 		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
 				req->actual,
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index d8d9a52a44b3..9d7b95d4e3d2 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1802,7 +1802,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
 out:
 	if (retval)
-		printk("gadget driver register failed %d\n", retval);
+		printk(KERN_WARNING "gadget driver register failed %d\n",
+		       retval);
 	return retval;
 }
 EXPORT_SYMBOL(usb_gadget_register_driver);
@@ -1847,7 +1848,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	udc_controller->gadget.dev.driver = NULL;
 	udc_controller->driver = NULL;
 
-	printk("unregistered gadget driver '%s'\n", driver->driver.name);
+	printk(KERN_WARNING "unregistered gadget driver '%s'\n",
+	       driver->driver.name);
 	return 0;
 }
 EXPORT_SYMBOL(usb_gadget_unregister_driver);
@@ -2455,7 +2457,7 @@ module_init(udc_init);
 static void __exit udc_exit(void)
 {
 	platform_driver_unregister(&udc_driver);
-	printk("%s unregistered\n", driver_desc);
+	printk(KERN_WARNING "%s unregistered\n", driver_desc);
 }
 
 module_exit(udc_exit);
diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h
index dd2f16ad5a88..e84b3c47ed3c 100644
--- a/drivers/usb/gadget/g_zero.h
+++ b/drivers/usb/gadget/g_zero.h
@@ -19,7 +19,7 @@ void disable_endpoints(struct usb_composite_dev *cdev,
 		struct usb_ep *in, struct usb_ep *out);
 
 /* configuration-specific linkup */
-int sourcesink_add(struct usb_composite_dev *cdev);
-int loopback_add(struct usb_composite_dev *cdev);
+int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume);
+int loopback_add(struct usb_composite_dev *cdev, bool autoresume);
 
 #endif /* __G_ZERO_H */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 60d3f9e9b51f..b9312dc6e041 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -199,10 +199,10 @@ DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1);
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
-	.idVendor =		__constant_cpu_to_le16(DRIVER_VENDOR_NUM),
-	.idProduct =		__constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
+	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_NUM),
 	.iManufacturer =	STRING_MANUFACTURER,
 	.iProduct =		STRING_PRODUCT,
 	.bNumConfigurations =	1,
@@ -241,8 +241,8 @@ static const struct usb_ac_header_descriptor_1 ac_header_desc = {
 	.bLength =		USB_DT_AC_HEADER_SIZE(1),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	USB_MS_HEADER,
-	.bcdADC =		__constant_cpu_to_le16(0x0100),
-	.wTotalLength =		__constant_cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)),
+	.bcdADC =		cpu_to_le16(0x0100),
+	.wTotalLength =		cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)),
 	.bInCollection =	1,
 	.baInterfaceNr = {
 		[0] =		GMIDI_MS_INTERFACE,
@@ -265,8 +265,8 @@ static const struct usb_ms_header_descriptor ms_header_desc = {
 	.bLength =		USB_DT_MS_HEADER_SIZE,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	USB_MS_HEADER,
-	.bcdMSC =		__constant_cpu_to_le16(0x0100),
-	.wTotalLength =		__constant_cpu_to_le16(USB_DT_MS_HEADER_SIZE
+	.bcdMSC =		cpu_to_le16(0x0100),
+	.wTotalLength =		cpu_to_le16(USB_DT_MS_HEADER_SIZE
 				+ 2*USB_DT_MIDI_IN_SIZE
 				+ 2*USB_DT_MIDI_OUT_SIZE(1)),
 };
@@ -1099,10 +1099,9 @@ static int gmidi_register_card(struct gmidi_device *dev)
 		.dev_free = gmidi_snd_free,
 	};
 
-	card = snd_card_new(index, id, THIS_MODULE, 0);
-	if (!card) {
-		ERROR(dev, "snd_card_new failed\n");
-		err = -ENOMEM;
+	err = snd_card_create(index, id, THIS_MODULE, 0, &card);
+	if (err < 0) {
+		ERROR(dev, "snd_card_create failed\n");
 		goto fail;
 	}
 	dev->card = card;
@@ -1227,7 +1226,7 @@ autoconf_fail:
 		 */
 		pr_warning("%s: controller '%s' not recognized\n",
 			shortname, gadget->name);
-		device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
+		device_desc.bcdDevice = cpu_to_le16(0x9999);
 	}
 
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 63419c4d503c..de010c939dbb 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1472,7 +1472,7 @@ static void ep0_setup(struct goku_udc *dev)
 				/* active endpoint */
 				if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0))
 					goto stall;
-				if (ctrl.wIndex & __constant_cpu_to_le16(
+				if (ctrl.wIndex & cpu_to_le16(
 						USB_DIR_IN)) {
 					if (!dev->ep[tmp].is_in)
 						goto stall;
@@ -1480,7 +1480,7 @@ static void ep0_setup(struct goku_udc *dev)
 					if (dev->ep[tmp].is_in)
 						goto stall;
 				}
-				if (ctrl.wValue != __constant_cpu_to_le16(
+				if (ctrl.wValue != cpu_to_le16(
 						USB_ENDPOINT_HALT))
 					goto stall;
 				if (tmp)
@@ -1493,7 +1493,7 @@ succeed:
 				return;
 			case USB_RECIP_DEVICE:
 				/* device remote wakeup: always clear */
-				if (ctrl.wValue != __constant_cpu_to_le16(1))
+				if (ctrl.wValue != cpu_to_le16(1))
 					goto stall;
 				VDBG(dev, "clear dev remote wakeup\n");
 				goto succeed;
@@ -1519,7 +1519,7 @@ succeed:
 	dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
 				&& ctrl.bRequestType == USB_RECIP_DEVICE);
 	if (unlikely(dev->req_config))
-		dev->configured = (ctrl.wValue != __constant_cpu_to_le16(0));
+		dev->configured = (ctrl.wValue != cpu_to_le16(0));
 
 	/* delegate everything to the gadget driver.
 	 * it may respond after this irq handler returns.
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 77c5d0a8a06e..168658b4b4e2 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1,7 +1,7 @@
 /*
  *	driver/usb/gadget/imx_udc.c
  *
- *	Copyright (C) 2005 Mike Lee(eemike@gmail.com)
+ *	Copyright (C) 2005 Mike Lee <eemike@gmail.com>
  *	Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
  *
  *	This program is free software; you can redistribute it and/or modify
@@ -28,6 +28,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/timer.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -51,7 +52,8 @@ void ep0_chg_stat(const char *label, struct imx_udc_struct *imx_usb,
 void imx_udc_enable(struct imx_udc_struct *imx_usb)
 {
 	int temp = __raw_readl(imx_usb->base + USB_CTRL);
-	__raw_writel(temp | CTRL_FE_ENA | CTRL_AFE_ENA, imx_usb->base + USB_CTRL);
+	__raw_writel(temp | CTRL_FE_ENA | CTRL_AFE_ENA,
+						imx_usb->base + USB_CTRL);
 	imx_usb->gadget.speed = USB_SPEED_FULL;
 }
 
@@ -126,7 +128,8 @@ void imx_udc_config(struct imx_udc_struct *imx_usb)
 			for (j = 0; j < 5; j++) {
 				__raw_writeb(ep_conf[j],
 					imx_usb->base + USB_DDAT);
-				do {} while (__raw_readl(imx_usb->base + USB_DADR)
+				do {} while (__raw_readl(imx_usb->base
+								+ USB_DADR)
 					& DADR_BSY);
 			}
 		}
@@ -183,7 +186,8 @@ void imx_udc_init_ep(struct imx_udc_struct *imx_usb)
 		temp = (EP_DIR(imx_ep) << 7) | (max << 5)
 			| (imx_ep->bmAttributes << 3);
 		__raw_writel(temp, imx_usb->base + USB_EP_STAT(i));
-		__raw_writel(temp | EPSTAT_FLUSH, imx_usb->base + USB_EP_STAT(i));
+		__raw_writel(temp | EPSTAT_FLUSH,
+						imx_usb->base + USB_EP_STAT(i));
 		D_INI(imx_usb->dev, "<%s> ep%d_stat %08x\n", __func__, i,
 			__raw_readl(imx_usb->base + USB_EP_STAT(i)));
 	}
@@ -278,15 +282,18 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep)
 	struct imx_udc_struct *imx_usb = imx_ep->imx_usb;
 	int temp, i;
 
-	D_ERR(imx_usb->dev, "<%s> Forced stall on %s\n", __func__, imx_ep->ep.name);
+	D_ERR(imx_usb->dev,
+		"<%s> Forced stall on %s\n", __func__, imx_ep->ep.name);
 
 	imx_flush(imx_ep);
 
 	/* Special care for ep0 */
-	if (EP_NO(imx_ep)) {
+	if (!EP_NO(imx_ep)) {
 		temp = __raw_readl(imx_usb->base + USB_CTRL);
-		__raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR, imx_usb->base + USB_CTRL);
-		do { } while (__raw_readl(imx_usb->base + USB_CTRL) & CTRL_CMDOVER);
+		__raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR,
+						imx_usb->base + USB_CTRL);
+		do { } while (__raw_readl(imx_usb->base + USB_CTRL)
+						& CTRL_CMDOVER);
 		temp = __raw_readl(imx_usb->base + USB_CTRL);
 		__raw_writel(temp & ~CTRL_CMDERROR, imx_usb->base + USB_CTRL);
 	}
@@ -296,12 +303,13 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep)
 			imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
 
 		for (i = 0; i < 100; i ++) {
-			temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
+			temp = __raw_readl(imx_usb->base
+						+ USB_EP_STAT(EP_NO(imx_ep)));
 			if (!(temp & EPSTAT_STALL))
 	 			break;
 	 		udelay(20);
 	 	}
-		if (i == 50)
+		if (i == 100)
 			D_ERR(imx_usb->dev, "<%s> Non finished stall on %s\n",
 				__func__, imx_ep->ep.name);
 	}
@@ -325,7 +333,8 @@ static int imx_udc_wakeup(struct usb_gadget *_gadget)
  *******************************************************************************
  */
 
-static void ep_add_request(struct imx_ep_struct *imx_ep, struct imx_request *req)
+static void ep_add_request(struct imx_ep_struct *imx_ep,
+							struct imx_request *req)
 {
 	if (unlikely(!req))
 		return;
@@ -334,7 +343,8 @@ static void ep_add_request(struct imx_ep_struct *imx_ep, struct imx_request *req
 	list_add_tail(&req->queue, &imx_ep->queue);
 }
 
-static void ep_del_request(struct imx_ep_struct *imx_ep, struct imx_request *req)
+static void ep_del_request(struct imx_ep_struct *imx_ep,
+							struct imx_request *req)
 {
 	if (unlikely(!req))
 		return;
@@ -343,7 +353,8 @@ static void ep_del_request(struct imx_ep_struct *imx_ep, struct imx_request *req
 	req->in_use = 0;
 }
 
-static void done(struct imx_ep_struct *imx_ep, struct imx_request *req, int status)
+static void done(struct imx_ep_struct *imx_ep,
+					struct imx_request *req, int status)
 {
 	ep_del_request(imx_ep, req);
 
@@ -494,7 +505,8 @@ static int write_fifo(struct imx_ep_struct *imx_ep, struct imx_request *req)
 				__func__, imx_ep->ep.name, req,
 				completed ? "completed" : "not completed");
 			if (!EP_NO(imx_ep))
-				ep0_chg_stat(__func__, imx_ep->imx_usb, EP0_IDLE);
+				ep0_chg_stat(__func__,
+						imx_ep->imx_usb, EP0_IDLE);
 		}
 	}
 
@@ -539,10 +551,9 @@ static int handle_ep0(struct imx_ep_struct *imx_ep)
 	struct imx_request *req = NULL;
 	int ret = 0;
 
-	if (!list_empty(&imx_ep->queue))
+	if (!list_empty(&imx_ep->queue)) {
 		req = list_entry(imx_ep->queue.next, struct imx_request, queue);
 
-	if (req) {
 		switch (imx_ep->imx_usb->ep0state) {
 
 		case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR */
@@ -561,6 +572,10 @@ static int handle_ep0(struct imx_ep_struct *imx_ep)
 		}
 	}
 
+	else
+		D_ERR(imx_ep->imx_usb->dev, "<%s> no request on %s\n",
+						__func__, imx_ep->ep.name);
+
 	return ret;
 }
 
@@ -583,7 +598,8 @@ static void handle_ep0_devreq(struct imx_udc_struct *imx_usb)
 				"<%s> no setup packet received\n", __func__);
 			goto stall;
 		}
-		u.word[i] = __raw_readl(imx_usb->base +	USB_EP_FDAT(EP_NO(imx_ep)));
+		u.word[i] = __raw_readl(imx_usb->base
+						+ USB_EP_FDAT(EP_NO(imx_ep)));
 	}
 
 	temp = imx_ep_empty(imx_ep);
@@ -759,7 +775,7 @@ static int imx_ep_queue
 	*/
 	if (imx_usb->set_config && !EP_NO(imx_ep)) {
 		imx_usb->set_config = 0;
-		D_EPX(imx_usb->dev,
+		D_ERR(imx_usb->dev,
 			"<%s> gadget reply set config\n", __func__);
 		return 0;
 	}
@@ -779,28 +795,29 @@ static int imx_ep_queue
 		return -ESHUTDOWN;
 	}
 
-	local_irq_save(flags);
-
 	/* Debug */
 	D_REQ(imx_usb->dev, "<%s> ep%d %s request for [%d] bytes\n",
 		__func__, EP_NO(imx_ep),
-		((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state == EP0_IN_DATA_PHASE)
-		|| (EP_NO(imx_ep) && EP_DIR(imx_ep))) ? "IN" : "OUT", usb_req->length);
+		((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state
+							== EP0_IN_DATA_PHASE)
+		|| (EP_NO(imx_ep) && EP_DIR(imx_ep)))
+					? "IN" : "OUT", usb_req->length);
 	dump_req(__func__, imx_ep, usb_req);
 
 	if (imx_ep->stopped) {
 		usb_req->status = -ESHUTDOWN;
-		ret = -ESHUTDOWN;
-		goto out;
+		return -ESHUTDOWN;
 	}
 
 	if (req->in_use) {
 		D_ERR(imx_usb->dev,
 			"<%s> refusing to queue req %p (already queued)\n",
 			__func__, req);
-		goto out;
+		return 0;
 	}
 
+	local_irq_save(flags);
+
 	usb_req->status = -EINPROGRESS;
 	usb_req->actual = 0;
 
@@ -810,7 +827,7 @@ static int imx_ep_queue
 		ret = handle_ep0(imx_ep);
 	else
 		ret = handle_ep(imx_ep);
-out:
+
 	local_irq_restore(flags);
 	return ret;
 }
@@ -997,71 +1014,32 @@ static void udc_stop_activity(struct imx_udc_struct *imx_usb,
  *******************************************************************************
  */
 
-static irqreturn_t imx_udc_irq(int irq, void *dev)
+/*
+ * Called when timer expires.
+ * Timer is started when CFG_CHG is received.
+ */
+static void handle_config(unsigned long data)
 {
-	struct imx_udc_struct *imx_usb = dev;
+	struct imx_udc_struct *imx_usb = (void *)data;
 	struct usb_ctrlrequest u;
 	int temp, cfg, intf, alt;
-	int intr = __raw_readl(imx_usb->base + USB_INTR);
 
-	if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START
-			| INTR_RESET_STOP | INTR_CFG_CHG)) {
-				dump_intr(__func__, intr, imx_usb->dev);
-				dump_usb_stat(__func__, imx_usb);
-	}
+	local_irq_disable();
 
-	if (!imx_usb->driver) {
-		/*imx_udc_disable(imx_usb);*/
-		goto end_irq;
-	}
+	temp = __raw_readl(imx_usb->base + USB_STAT);
+	cfg  = (temp & STAT_CFG) >> 5;
+	intf = (temp & STAT_INTF) >> 3;
+	alt  =  temp & STAT_ALTSET;
 
-	if (intr & INTR_WAKEUP) {
-		if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
-			&& imx_usb->driver && imx_usb->driver->resume)
-				imx_usb->driver->resume(&imx_usb->gadget);
-		imx_usb->set_config = 0;
-		imx_usb->gadget.speed = USB_SPEED_FULL;
-	}
-
-	if (intr & INTR_SUSPEND) {
-		if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN
-			&& imx_usb->driver && imx_usb->driver->suspend)
-				imx_usb->driver->suspend(&imx_usb->gadget);
-		imx_usb->set_config = 0;
-		imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
-	}
-
-	if (intr & INTR_RESET_START) {
-		__raw_writel(intr, imx_usb->base + USB_INTR);
-		udc_stop_activity(imx_usb, imx_usb->driver);
-		imx_usb->set_config = 0;
-		imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
-	}
+	D_REQ(imx_usb->dev,
+		"<%s> orig config C=%d, I=%d, A=%d / "
+		"req config C=%d, I=%d, A=%d\n",
+		__func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt,
+		cfg, intf, alt);
 
-	if (intr & INTR_RESET_STOP)
-		imx_usb->gadget.speed = USB_SPEED_FULL;
+	if (cfg == 1 || cfg == 2) {
 
-	if (intr & INTR_CFG_CHG) {
-		__raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR);
-		temp = __raw_readl(imx_usb->base + USB_STAT);
-		cfg  = (temp & STAT_CFG) >> 5;
-		intf = (temp & STAT_INTF) >> 3;
-		alt  =  temp & STAT_ALTSET;
-
-		D_REQ(imx_usb->dev,
-			"<%s> orig config C=%d, I=%d, A=%d / "
-			"req config C=%d, I=%d, A=%d\n",
-			__func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt,
-			cfg, intf, alt);
-
-		if (cfg != 1 && cfg != 2)
-			goto end_irq;
-
-		imx_usb->set_config = 0;
-
-		/* Config setup */
 		if (imx_usb->cfg != cfg) {
-			D_REQ(imx_usb->dev, "<%s> Change config start\n",__func__);
 			u.bRequest = USB_REQ_SET_CONFIGURATION;
 			u.bRequestType = USB_DIR_OUT |
 					USB_TYPE_STANDARD |
@@ -1070,14 +1048,10 @@ static irqreturn_t imx_udc_irq(int irq, void *dev)
 			u.wIndex = 0;
 			u.wLength = 0;
 			imx_usb->cfg = cfg;
-			imx_usb->set_config = 1;
 			imx_usb->driver->setup(&imx_usb->gadget, &u);
-			imx_usb->set_config = 0;
-			D_REQ(imx_usb->dev, "<%s> Change config done\n",__func__);
 
 		}
 		if (imx_usb->intf != intf || imx_usb->alt != alt) {
-			D_REQ(imx_usb->dev, "<%s> Change interface start\n",__func__);
 			u.bRequest = USB_REQ_SET_INTERFACE;
 			u.bRequestType = USB_DIR_OUT |
 					  USB_TYPE_STANDARD |
@@ -1087,20 +1061,92 @@ static irqreturn_t imx_udc_irq(int irq, void *dev)
 			u.wLength = 0;
 			imx_usb->intf = intf;
 			imx_usb->alt = alt;
-			imx_usb->set_config = 1;
 			imx_usb->driver->setup(&imx_usb->gadget, &u);
-			imx_usb->set_config = 0;
-			D_REQ(imx_usb->dev, "<%s> Change interface done\n",__func__);
 		}
 	}
 
+	imx_usb->set_config = 0;
+
+	local_irq_enable();
+}
+
+static irqreturn_t imx_udc_irq(int irq, void *dev)
+{
+	struct imx_udc_struct *imx_usb = dev;
+	int intr = __raw_readl(imx_usb->base + USB_INTR);
+	int temp;
+
+	if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START
+			| INTR_RESET_STOP | INTR_CFG_CHG)) {
+				dump_intr(__func__, intr, imx_usb->dev);
+				dump_usb_stat(__func__, imx_usb);
+	}
+
+	if (!imx_usb->driver)
+		goto end_irq;
+
 	if (intr & INTR_SOF) {
+		/* Copy from Freescale BSP.
+		   We must enable SOF intr and set CMDOVER.
+		   Datasheet don't specifiy this action, but it
+		   is done in Freescale BSP, so just copy it.
+		*/
 		if (imx_usb->ep0state == EP0_IDLE) {
 			temp = __raw_readl(imx_usb->base + USB_CTRL);
-			__raw_writel(temp | CTRL_CMDOVER, imx_usb->base + USB_CTRL);
+			__raw_writel(temp | CTRL_CMDOVER,
+						imx_usb->base + USB_CTRL);
 		}
 	}
 
+	if (intr & INTR_CFG_CHG) {
+		/* A workaround of serious IMX UDC bug.
+		   Handling of CFG_CHG should be delayed for some time, because
+		   IMX does not NACK the host when CFG_CHG interrupt is pending.
+		   There is no time to handle current CFG_CHG
+		   if next CFG_CHG or SETUP packed is send immediately.
+		   We have to clear CFG_CHG, start the timer and
+		   NACK the host by setting CTRL_CMDOVER
+		   if it sends any SETUP packet.
+		   When timer expires, handler is called to handle configuration
+		   changes. While CFG_CHG is not handled (set_config=1),
+		   we must NACK the host to every SETUP packed.
+		   This delay prevents from going out of sync with host.
+		 */
+		__raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR);
+		imx_usb->set_config = 1;
+		mod_timer(&imx_usb->timer, jiffies + 5);
+		goto end_irq;
+	}
+
+	if (intr & INTR_WAKEUP) {
+		if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
+			&& imx_usb->driver && imx_usb->driver->resume)
+				imx_usb->driver->resume(&imx_usb->gadget);
+		imx_usb->set_config = 0;
+		del_timer(&imx_usb->timer);
+		imx_usb->gadget.speed = USB_SPEED_FULL;
+	}
+
+	if (intr & INTR_SUSPEND) {
+		if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN
+			&& imx_usb->driver && imx_usb->driver->suspend)
+				imx_usb->driver->suspend(&imx_usb->gadget);
+		imx_usb->set_config = 0;
+		del_timer(&imx_usb->timer);
+		imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
+	}
+
+	if (intr & INTR_RESET_START) {
+		__raw_writel(intr, imx_usb->base + USB_INTR);
+		udc_stop_activity(imx_usb, imx_usb->driver);
+		imx_usb->set_config = 0;
+		del_timer(&imx_usb->timer);
+		imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
+	}
+
+	if (intr & INTR_RESET_STOP)
+		imx_usb->gadget.speed = USB_SPEED_FULL;
+
 end_irq:
 	__raw_writel(intr, imx_usb->base + USB_INTR);
 	return IRQ_HANDLED;
@@ -1109,6 +1155,7 @@ end_irq:
 static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev)
 {
 	struct imx_udc_struct *imx_usb = dev;
+	struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[0];
 	int intr = __raw_readl(imx_usb->base + USB_EP_INTR(0));
 
 	dump_ep_intr(__func__, 0, intr, imx_usb->dev);
@@ -1118,16 +1165,15 @@ static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev)
 		return IRQ_HANDLED;
 	}
 
-	/* DEVREQ IRQ has highest priority */
+	/* DEVREQ has highest priority */
 	if (intr & (EPINTR_DEVREQ | EPINTR_MDEVREQ))
 		handle_ep0_devreq(imx_usb);
 	/* Seem i.MX is missing EOF interrupt sometimes.
-	 * Therefore we monitor both EOF and FIFO_EMPTY interrups
-	 * when transmiting, and both EOF and FIFO_FULL when
-	 * receiving data.
+	 * Therefore we don't monitor EOF.
+	 * We call handle_ep0() only if a request is queued for ep0.
 	 */
-	else if (intr & (EPINTR_EOF | EPINTR_FIFO_EMPTY | EPINTR_FIFO_FULL))
-		handle_ep0(&imx_usb->imx_ep[0]);
+	else if (!list_empty(&imx_ep->queue))
+		handle_ep0(imx_ep);
 
 	__raw_writel(intr, imx_usb->base + USB_EP_INTR(0));
 
@@ -1186,8 +1232,8 @@ static struct imx_udc_struct controller = {
 		.ep0		= &controller.imx_ep[0].ep,
 		.name		= driver_name,
 		.dev = {
-			 .bus_id	= "gadget",
-		 },
+			.init_name	= "gadget",
+		},
 	},
 
 	.imx_ep[0] = {
@@ -1318,6 +1364,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	udc_stop_activity(imx_usb, driver);
 	imx_udc_disable(imx_usb);
+	del_timer(&imx_usb->timer);
 
 	driver->unbind(&imx_usb->gadget);
 	imx_usb->gadget.dev.driver = NULL;
@@ -1435,6 +1482,10 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 	usb_init_data(imx_usb);
 	imx_udc_init(imx_usb);
 
+	init_timer(&imx_usb->timer);
+	imx_usb->timer.function = handle_config;
+	imx_usb->timer.data = (unsigned long)imx_usb;
+
 	return 0;
 
 fail3:
@@ -1457,6 +1508,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 	int i;
 
 	imx_udc_disable(imx_usb);
+	del_timer(&imx_usb->timer);
 
 	for (i = 0; i < IMX_USB_NB_EP + 1; i++)
 		free_irq(imx_usb->usbd_int[i], imx_usb);
diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h
index 850076937d8d..b48ad59603d1 100644
--- a/drivers/usb/gadget/imx_udc.h
+++ b/drivers/usb/gadget/imx_udc.h
@@ -23,7 +23,8 @@
 /* Helper macros */
 #define EP_NO(ep)	((ep->bEndpointAddress) & ~USB_DIR_IN) /* IN:1, OUT:0 */
 #define EP_DIR(ep)	((ep->bEndpointAddress) & USB_DIR_IN ? 1 : 0)
-#define irq_to_ep(irq)	(((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) ? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/
+#define irq_to_ep(irq)	(((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) \
+		? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/
 #define ep_to_irq(ep)	(EP_NO((ep)) + USBD_INT0)
 #define IMX_USB_NB_EP	6
 
@@ -58,6 +59,7 @@ struct imx_udc_struct {
 	struct device				*dev;
 	struct imx_ep_struct			imx_ep[IMX_USB_NB_EP];
 	struct clk				*clk;
+	struct timer_list			timer;
 	enum ep0_state				ep0state;
 	struct resource				*res;
 	void __iomem				*base;
@@ -88,8 +90,8 @@ struct imx_udc_struct {
 #define  USB_EP_FDAT3(x)	(0x3F + (x*0x30)) /* USB FIFO data */
 #define  USB_EP_FSTAT(x)	(0x40 + (x*0x30)) /* USB FIFO status */
 #define  USB_EP_FCTRL(x)	(0x44 + (x*0x30)) /* USB FIFO control */
-#define  USB_EP_LRFP(x)		(0x48 + (x*0x30)) /* USB last read frame pointer */
-#define  USB_EP_LWFP(x)		(0x4C + (x*0x30)) /* USB last write frame pointer */
+#define  USB_EP_LRFP(x)		(0x48 + (x*0x30)) /* USB last rd f. pointer */
+#define  USB_EP_LWFP(x)		(0x4C + (x*0x30)) /* USB last wr f. pointer */
 #define  USB_EP_FALRM(x)	(0x50 + (x*0x30)) /* USB FIFO alarm */
 #define  USB_EP_FRDP(x)		(0x54 + (x*0x30)) /* USB FIFO read pointer */
 #define  USB_EP_FWRP(x)		(0x58 + (x*0x30)) /* USB FIFO write pointer */
@@ -170,7 +172,7 @@ struct imx_udc_struct {
 /* #define DEBUG_IRQ */
 /* #define DEBUG_EPIRQ */
 /* #define DEBUG_DUMP */
-#define DEBUG_ERR
+/* #define DEBUG_ERR */
 
 #ifdef DEBUG_REQ
 	#define D_REQ(dev, args...)	dev_dbg(dev, ## args)
@@ -228,7 +230,8 @@ struct imx_udc_struct {
 #endif /* DEBUG_IRQ */
 
 #ifdef DEBUG_EPIRQ
-	static void dump_ep_intr(const char *label, int nr, int irqreg, struct device *dev)
+	static void dump_ep_intr(const char *label, int nr, int irqreg,
+							struct device *dev)
 	{
 		dev_dbg(dev, "<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n", label, nr,
 			(irqreg & EPINTR_FIFO_FULL) ? " full" : "",
@@ -246,7 +249,8 @@ struct imx_udc_struct {
 #endif /* DEBUG_IRQ */
 
 #ifdef DEBUG_DUMP
-	static void dump_usb_stat(const char *label, struct imx_udc_struct *imx_usb)
+	static void dump_usb_stat(const char *label,
+						struct imx_udc_struct *imx_usb)
 	{
 		int temp = __raw_readl(imx_usb->base + USB_STAT);
 
@@ -259,12 +263,15 @@ struct imx_udc_struct {
 			(temp & STAT_ALTSET));
 	}
 
-	static void dump_ep_stat(const char *label, struct imx_ep_struct *imx_ep)
+	static void dump_ep_stat(const char *label,
+						struct imx_ep_struct *imx_ep)
 	{
-		int temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
+		int temp = __raw_readl(imx_ep->imx_usb->base
+						+ USB_EP_INTR(EP_NO(imx_ep)));
 
 		dev_dbg(imx_ep->imx_usb->dev,
-			"<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n", label, EP_NO(imx_ep),
+			"<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n",
+			label, EP_NO(imx_ep),
 			(temp & EPINTR_FIFO_FULL) ? " full" : "",
 			(temp & EPINTR_FIFO_EMPTY) ? " fempty" : "",
 			(temp & EPINTR_FIFO_ERROR) ? " ferr" : "",
@@ -275,18 +282,22 @@ struct imx_udc_struct {
 			(temp & EPINTR_DEVREQ) ? " devreq" : "",
 			(temp & EPINTR_EOT) ? " eot" : "");
 
-		temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
+		temp = __raw_readl(imx_ep->imx_usb->base
+						+ USB_EP_STAT(EP_NO(imx_ep)));
 
 		dev_dbg(imx_ep->imx_usb->dev,
-			"<%s> EP%d_STAT=[%s%s bcount=%d]\n", label, EP_NO(imx_ep),
+			"<%s> EP%d_STAT=[%s%s bcount=%d]\n",
+			label, EP_NO(imx_ep),
 			(temp & EPSTAT_SIP) ? " sip" : "",
 			(temp & EPSTAT_STALL) ? " stall" : "",
 			(temp & EPSTAT_BCOUNT) >> 16);
 
-		temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_FSTAT(EP_NO(imx_ep)));
+		temp = __raw_readl(imx_ep->imx_usb->base
+						+ USB_EP_FSTAT(EP_NO(imx_ep)));
 
 		dev_dbg(imx_ep->imx_usb->dev,
-			"<%s> EP%d_FSTAT=[%s%s%s%s%s%s%s]\n", label, EP_NO(imx_ep),
+			"<%s> EP%d_FSTAT=[%s%s%s%s%s%s%s]\n",
+			label, EP_NO(imx_ep),
 			(temp & FSTAT_ERR) ? " ferr" : "",
 			(temp & FSTAT_UF) ? " funder" : "",
 			(temp & FSTAT_OF) ? " fover" : "",
@@ -296,19 +307,23 @@ struct imx_udc_struct {
 			(temp & FSTAT_EMPTY) ? " fempty" : "");
 	}
 
-	static void dump_req(const char *label, struct imx_ep_struct *imx_ep, struct usb_request *req)
+	static void dump_req(const char *label, struct imx_ep_struct *imx_ep,
+							struct usb_request *req)
 	{
 		int i;
 
 		if (!req || !req->buf) {
-			dev_dbg(imx_ep->imx_usb->dev, "<%s> req or req buf is free\n", label);
+			dev_dbg(imx_ep->imx_usb->dev,
+					"<%s> req or req buf is free\n", label);
 			return;
 		}
 
-		if ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state == EP0_IN_DATA_PHASE)
+		if ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state
+			== EP0_IN_DATA_PHASE)
 			|| (EP_NO(imx_ep) && EP_DIR(imx_ep))) {
 
-			dev_dbg(imx_ep->imx_usb->dev, "<%s> request dump <", label);
+			dev_dbg(imx_ep->imx_usb->dev,
+						"<%s> request dump <", label);
 			for (i = 0; i < req->length; i++)
 				printk("%02x-", *((u8 *)req->buf + i));
 			printk(">\n");
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 317b48fdbf01..d20937f28a19 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1334,7 +1334,7 @@ static void make_qualifier (struct dev_data *dev)
 
 	qual.bLength = sizeof qual;
 	qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER;
-	qual.bcdUSB = __constant_cpu_to_le16 (0x0200);
+	qual.bcdUSB = cpu_to_le16 (0x0200);
 
 	desc = dev->dev;
 	qual.bDeviceClass = desc->bDeviceClass;
@@ -1908,7 +1908,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 			|| dev->dev->bNumConfigurations != 1)
 		goto fail;
 	dev->dev->bNumConfigurations = 1;
-	dev->dev->bcdUSB = __constant_cpu_to_le16 (0x0200);
+	dev->dev->bcdUSB = cpu_to_le16 (0x0200);
 
 	/* triggers gadgetfs_bind(); then we can enumerate. */
 	spin_unlock_irq (&dev->lock);
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index d554b0895603..6cd3d54f5640 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -432,8 +432,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	device_add(&dev->gadget.dev);
 	retval = driver->bind(&dev->gadget);
 	if (retval) {
-		printk("%s: bind to driver %s --> error %d\n", dev->gadget.name,
-		       driver->driver.name, retval);
+		printk(KERN_WARNING "%s: bind to driver %s --> error %d\n",
+		       dev->gadget.name, driver->driver.name, retval);
 		device_del(&dev->gadget.dev);
 
 		dev->driver = 0;
@@ -445,8 +445,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	 * for set_configuration as well as eventual disconnect.
 	 * NOTE:  this shouldn't power up until later.
 	 */
-	printk("%s: registered gadget driver '%s'\n", dev->gadget.name,
-	       driver->driver.name);
+	printk(KERN_WARNING "%s: registered gadget driver '%s'\n",
+	       dev->gadget.name, driver->driver.name);
 
 	udc_enable(dev);
 
@@ -581,7 +581,8 @@ static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
 			 * discard the extra data.
 			 */
 			if (req->req.status != -EOVERFLOW)
-				printk("%s overflow %d\n", ep->ep.name, count);
+				printk(KERN_WARNING "%s overflow %d\n",
+				       ep->ep.name, count);
 			req->req.status = -EOVERFLOW;
 		} else {
 			*buf++ = byte;
@@ -831,7 +832,8 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
 						       queue);
 
 				if (!req) {
-					printk("%s: NULL REQ %d\n",
+					printk(KERN_WARNING
+					       "%s: NULL REQ %d\n",
 					       __func__, ep_idx);
 					flush(ep);
 					break;
@@ -844,7 +846,7 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
 
 	} else {
 		/* Throw packet away.. */
-		printk("%s: No descriptor?!?\n", __func__);
+		printk(KERN_WARNING "%s: No descriptor?!?\n", __func__);
 		flush(ep);
 	}
 }
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 12c6d83b218c..9498be87a724 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -142,8 +142,8 @@ static char *type_string (u8 bmAttributes)
 
 #include "net2280.h"
 
-#define valid_bit	__constant_cpu_to_le32 (1 << VALID_BIT)
-#define dma_done_ie	__constant_cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE)
+#define valid_bit	cpu_to_le32 (1 << VALID_BIT)
+#define dma_done_ie	cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE)
 
 /*-------------------------------------------------------------------------*/
 
@@ -425,7 +425,7 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
 			return NULL;
 		}
 		td->dmacount = 0;	/* not VALID */
-		td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID);
+		td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID);
 		td->dmadesc = td->dmaaddr;
 		req->td = td;
 	}
@@ -775,7 +775,7 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req)
 	fill_dma_desc (ep, req, 1);
 
 	if (!use_dma_chaining)
-		req->td->dmacount |= __constant_cpu_to_le32 (1 << END_OF_CHAIN);
+		req->td->dmacount |= cpu_to_le32 (1 << END_OF_CHAIN);
 
 	start_queue (ep, tmp, req->td_dma);
 }
@@ -2407,9 +2407,9 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 
 			if (readl (&e->regs->ep_rsp)
 					& (1 << SET_ENDPOINT_HALT))
-				status = __constant_cpu_to_le32 (1);
+				status = cpu_to_le32 (1);
 			else
-				status = __constant_cpu_to_le32 (0);
+				status = cpu_to_le32 (0);
 
 			/* don't bother with a request object! */
 			writel (0, &dev->epregs [0].ep_irqenb);
@@ -2667,7 +2667,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
 				req = list_entry (ep->queue.next,
 						struct net2280_request, queue);
 				dmacount = req->td->dmacount;
-				dmacount &= __constant_cpu_to_le32 (
+				dmacount &= cpu_to_le32 (
 						(1 << VALID_BIT)
 						| DMA_BYTE_COUNT_MASK);
 				if (dmacount && (dmacount & valid_bit) == 0)
@@ -2881,7 +2881,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 			goto done;
 		}
 		td->dmacount = 0;	/* not VALID */
-		td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID);
+		td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID);
 		td->dmadesc = td->dmaaddr;
 		dev->ep [i].dummy = td;
 	}
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 5a3034fdfe47..29500154d00c 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -225,12 +225,12 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 	.bDeviceSubClass =	0,
 	.bDeviceProtocol =	0,
-	.idVendor =		__constant_cpu_to_le16(PRINTER_VENDOR_NUM),
-	.idProduct =		__constant_cpu_to_le16(PRINTER_PRODUCT_NUM),
+	.idVendor =		cpu_to_le16(PRINTER_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(PRINTER_PRODUCT_NUM),
 	.iManufacturer =	STRING_MANUFACTURER,
 	.iProduct =		STRING_PRODUCT,
 	.iSerialNumber =	STRING_SERIALNUM,
@@ -299,20 +299,20 @@ static struct usb_endpoint_descriptor hs_ep_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512)
+	.wMaxPacketSize =	cpu_to_le16(512)
 };
 
 static struct usb_endpoint_descriptor hs_ep_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	__constant_cpu_to_le16(512)
+	.wMaxPacketSize =	cpu_to_le16(512)
 };
 
 static struct usb_qualifier_descriptor dev_qualifier = {
 	.bLength =		sizeof dev_qualifier,
 	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_PRINTER,
 	.bNumConfigurations =	1
 };
@@ -1406,16 +1406,16 @@ printer_bind(struct usb_gadget *gadget)
 			gadget->name);
 		/* unrecognized, but safe unless bulk is REALLY quirky */
 		device_desc.bcdDevice =
-			__constant_cpu_to_le16(0xFFFF);
+			cpu_to_le16(0xFFFF);
 	}
 	snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
 
 	device_desc.idVendor =
-		__constant_cpu_to_le16(PRINTER_VENDOR_NUM);
+		cpu_to_le16(PRINTER_VENDOR_NUM);
 	device_desc.idProduct =
-		__constant_cpu_to_le16(PRINTER_PRODUCT_NUM);
+		cpu_to_le16(PRINTER_PRODUCT_NUM);
 
 	/* support optional vendor/distro customization */
 	if (idVendor) {
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 990f40f988d4..8cc676ecbb23 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -30,6 +30,7 @@
 #include <linux/proc_fs.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
@@ -278,7 +279,7 @@ static void pxa_init_debugfs(struct pxa_udc *udc)
 		goto err_queues;
 	eps = debugfs_create_file("epstate", 0400, root, udc,
 			&eps_dbg_fops);
-	if (!queues)
+	if (!eps)
 		goto err_eps;
 
 	udc->debugfs_root = root;
@@ -747,13 +748,13 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
 }
 
 /**
- * ep_end_out_req - Ends control endpoint in request
+ * ep_end_out_req - Ends endpoint OUT request
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends endpoint in request (completes usb request).
+ * Ends endpoint OUT request (completes usb request).
  */
 static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -762,13 +763,13 @@ static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
 }
 
 /**
- * ep0_end_out_req - Ends control endpoint in request (ends data stage)
+ * ep0_end_out_req - Ends control endpoint OUT request (ends data stage)
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends control endpoint in request (completes usb request), and puts
+ * Ends control endpoint OUT request (completes usb request), and puts
  * control endpoint into idle state
  */
 static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
@@ -779,13 +780,13 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
 }
 
 /**
- * ep_end_in_req - Ends endpoint out request
+ * ep_end_in_req - Ends endpoint IN request
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends endpoint out request (completes usb request).
+ * Ends endpoint IN request (completes usb request).
  */
 static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -794,20 +795,18 @@ static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
 }
 
 /**
- * ep0_end_in_req - Ends control endpoint out request (ends data stage)
+ * ep0_end_in_req - Ends control endpoint IN request (ends data stage)
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends control endpoint out request (completes usb request), and puts
+ * Ends control endpoint IN request (completes usb request), and puts
  * control endpoint into status state
  */
 static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
 {
-	struct pxa_udc *udc = ep->dev;
-
-	set_ep0state(udc, IN_STATUS_STAGE);
+	set_ep0state(ep->dev, IN_STATUS_STAGE);
 	ep_end_in_req(ep, req);
 }
 
@@ -1167,7 +1166,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 				ep_end_in_req(ep, req);
 			} else {
 				ep_err(ep, "got a request of %d bytes while"
-					"in state WATI_ACK_SET_CONF_INTERF\n",
+					"in state WAIT_ACK_SET_CONF_INTERF\n",
 					length);
 				ep_del_request(ep, req);
 				rc = -EL2HLT;
@@ -1213,30 +1212,26 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	struct udc_usb_ep	*udc_usb_ep;
 	struct pxa27x_request	*req;
 	unsigned long		flags;
-	int			rc;
+	int			rc = -EINVAL;
 
 	if (!_ep)
-		return -EINVAL;
+		return rc;
 	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
 	ep = udc_usb_ep->pxa_ep;
 	if (!ep || is_ep0(ep))
-		return -EINVAL;
+		return rc;
 
 	spin_lock_irqsave(&ep->lock, flags);
 
 	/* make sure it's actually queued on this endpoint */
 	list_for_each_entry(req, &ep->queue, queue) {
-		if (&req->req == _req)
+		if (&req->req == _req) {
+			req_done(ep, req, -ECONNRESET);
+			rc = 0;
 			break;
+		}
 	}
 
-	rc = -EINVAL;
-	if (&req->req != _req)
-		goto out;
-
-	rc = 0;
-	req_done(ep, req, -ECONNRESET);
-out:
 	spin_unlock_irqrestore(&ep->lock, flags);
 	return rc;
 }
@@ -1471,6 +1466,32 @@ static struct usb_ep_ops pxa_ep_ops = {
 	.fifo_flush	= pxa_ep_fifo_flush,
 };
 
+/**
+ * dplus_pullup - Connect or disconnect pullup resistor to D+ pin
+ * @udc: udc device
+ * @on: 0 if disconnect pullup resistor, 1 otherwise
+ * Context: any
+ *
+ * Handle D+ pullup resistor, make the device visible to the usb bus, and
+ * declare it as a full speed usb device
+ */
+static void dplus_pullup(struct pxa_udc *udc, int on)
+{
+	if (on) {
+		if (gpio_is_valid(udc->mach->gpio_pullup))
+			gpio_set_value(udc->mach->gpio_pullup,
+				       !udc->mach->gpio_pullup_inverted);
+		if (udc->mach->udc_command)
+			udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+	} else {
+		if (gpio_is_valid(udc->mach->gpio_pullup))
+			gpio_set_value(udc->mach->gpio_pullup,
+				       udc->mach->gpio_pullup_inverted);
+		if (udc->mach->udc_command)
+			udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+	}
+	udc->pullup_on = on;
+}
 
 /**
  * pxa_udc_get_frame - Returns usb frame number
@@ -1500,21 +1521,145 @@ static int pxa_udc_wakeup(struct usb_gadget *_gadget)
 	return 0;
 }
 
+static void udc_enable(struct pxa_udc *udc);
+static void udc_disable(struct pxa_udc *udc);
+
+/**
+ * should_enable_udc - Tells if UDC should be enabled
+ * @udc: udc device
+ * Context: any
+ *
+ * The UDC should be enabled if :
+
+ *  - the pullup resistor is connected
+ *  - and a gadget driver is bound
+ *  - and vbus is sensed (or no vbus sense is available)
+ *
+ * Returns 1 if UDC should be enabled, 0 otherwise
+ */
+static int should_enable_udc(struct pxa_udc *udc)
+{
+	int put_on;
+
+	put_on = ((udc->pullup_on) && (udc->driver));
+	put_on &= ((udc->vbus_sensed) || (!udc->transceiver));
+	return put_on;
+}
+
+/**
+ * should_disable_udc - Tells if UDC should be disabled
+ * @udc: udc device
+ * Context: any
+ *
+ * The UDC should be disabled if :
+ *  - the pullup resistor is not connected
+ *  - or no gadget driver is bound
+ *  - or no vbus is sensed (when vbus sesing is available)
+ *
+ * Returns 1 if UDC should be disabled
+ */
+static int should_disable_udc(struct pxa_udc *udc)
+{
+	int put_off;
+
+	put_off = ((!udc->pullup_on) || (!udc->driver));
+	put_off |= ((!udc->vbus_sensed) && (udc->transceiver));
+	return put_off;
+}
+
+/**
+ * pxa_udc_pullup - Offer manual D+ pullup control
+ * @_gadget: usb gadget using the control
+ * @is_active: 0 if disconnect, else connect D+ pullup resistor
+ * Context: !in_interrupt()
+ *
+ * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup
+ */
+static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+	struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+	if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
+		return -EOPNOTSUPP;
+
+	dplus_pullup(udc, is_active);
+
+	if (should_enable_udc(udc))
+		udc_enable(udc);
+	if (should_disable_udc(udc))
+		udc_disable(udc);
+	return 0;
+}
+
+static void udc_enable(struct pxa_udc *udc);
+static void udc_disable(struct pxa_udc *udc);
+
+/**
+ * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc
+ * @_gadget: usb gadget
+ * @is_active: 0 if should disable the udc, 1 if should enable
+ *
+ * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the
+ * udc, and deactivates D+ pullup resistor.
+ *
+ * Returns 0
+ */
+static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+	udc->vbus_sensed = is_active;
+	if (should_enable_udc(udc))
+		udc_enable(udc);
+	if (should_disable_udc(udc))
+		udc_disable(udc);
+
+	return 0;
+}
+
+/**
+ * pxa_udc_vbus_draw - Called by gadget driver after SET_CONFIGURATION completed
+ * @_gadget: usb gadget
+ * @mA: current drawn
+ *
+ * Context: !in_interrupt()
+ *
+ * Called after a configuration was chosen by a USB host, to inform how much
+ * current can be drawn by the device from VBus line.
+ *
+ * Returns 0 or -EOPNOTSUPP if no transceiver is handling the udc
+ */
+static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+	struct pxa_udc *udc;
+
+	udc = to_gadget_udc(_gadget);
+	if (udc->transceiver)
+		return otg_set_power(udc->transceiver, mA);
+	return -EOPNOTSUPP;
+}
+
 static const struct usb_gadget_ops pxa_udc_ops = {
 	.get_frame	= pxa_udc_get_frame,
 	.wakeup		= pxa_udc_wakeup,
-	/* current versions must always be self-powered */
+	.pullup		= pxa_udc_pullup,
+	.vbus_session	= pxa_udc_vbus_session,
+	.vbus_draw	= pxa_udc_vbus_draw,
 };
 
 /**
  * udc_disable - disable udc device controller
  * @udc: udc device
+ * Context: any
  *
  * Disables the udc device : disables clocks, udc interrupts, control endpoint
  * interrupts.
  */
 static void udc_disable(struct pxa_udc *udc)
 {
+	if (!udc->enabled)
+		return;
+
 	udc_writel(udc, UDCICR0, 0);
 	udc_writel(udc, UDCICR1, 0);
 
@@ -1523,8 +1668,8 @@ static void udc_disable(struct pxa_udc *udc)
 
 	ep0_idle(udc);
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	if (udc->mach->udc_command)
-		udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+
+	udc->enabled = 0;
 }
 
 /**
@@ -1555,10 +1700,9 @@ static __init void udc_init_data(struct pxa_udc *dev)
 	}
 
 	/* USB endpoints init */
-	for (i = 0; i < NR_USB_ENDPOINTS; i++)
-		if (i != 0)
-			list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
-					&dev->gadget.ep_list);
+	for (i = 1; i < NR_USB_ENDPOINTS; i++)
+		list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
+				&dev->gadget.ep_list);
 }
 
 /**
@@ -1570,6 +1714,9 @@ static __init void udc_init_data(struct pxa_udc *dev)
  */
 static void udc_enable(struct pxa_udc *udc)
 {
+	if (udc->enabled)
+		return;
+
 	udc_writel(udc, UDCICR0, 0);
 	udc_writel(udc, UDCICR1, 0);
 	udc_clear_mask_UDCCR(udc, UDCCR_UDE);
@@ -1598,9 +1745,7 @@ static void udc_enable(struct pxa_udc *udc)
 	/* enable ep0 irqs */
 	pio_irq_enable(&udc->pxa_ep[0]);
 
-	dev_info(udc->dev, "UDC connecting\n");
-	if (udc->mach->udc_command)
-		udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+	udc->enabled = 1;
 }
 
 /**
@@ -1612,6 +1757,9 @@ static void udc_enable(struct pxa_udc *udc)
  * usb traffic follows until a disconnect is reported.  Then a host may connect
  * again, or the driver might get unbound.
  *
+ * Note that the udc is not automatically enabled. Check function
+ * should_enable_udc().
+ *
  * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
  */
 int usb_gadget_register_driver(struct usb_gadget_driver *driver)
@@ -1630,6 +1778,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	/* first hook up the driver ... */
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
+	dplus_pullup(udc, 1);
 
 	retval = device_add(&udc->gadget.dev);
 	if (retval) {
@@ -1645,9 +1794,21 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	dev_dbg(udc->dev, "registered gadget driver '%s'\n",
 		driver->driver.name);
 
-	udc_enable(udc);
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+		if (retval) {
+			dev_err(udc->dev, "can't bind to transceiver\n");
+			goto transceiver_fail;
+		}
+	}
+
+	if (should_enable_udc(udc))
+		udc_enable(udc);
 	return 0;
 
+transceiver_fail:
+	if (driver->unbind)
+		driver->unbind(&udc->gadget);
 bind_fail:
 	device_del(&udc->gadget.dev);
 add_fail:
@@ -1699,14 +1860,17 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	stop_activity(udc, driver);
 	udc_disable(udc);
+	dplus_pullup(udc, 0);
 
 	driver->unbind(&udc->gadget);
 	udc->driver = NULL;
 
 	device_del(&udc->gadget.dev);
-
 	dev_info(udc->dev, "unregistered gadget driver '%s'\n",
 		 driver->driver.name);
+
+	if (udc->transceiver)
+		return otg_set_peripheral(udc->transceiver, NULL);
 	return 0;
 }
 EXPORT_SYMBOL(usb_gadget_unregister_driver);
@@ -1823,14 +1987,14 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
 	struct pxa27x_request	*req = NULL;
 	int			completed = 0;
 
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
 	udccsr0 = udc_ep_readl(ep, UDCCSR);
 	ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n",
 		EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR),
 		(fifo_irq << 1 | opc_irq));
 
-	if (!list_empty(&ep->queue))
-		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-
 	if (udccsr0 & UDCCSR0_SST) {
 		ep_dbg(ep, "clearing stall status\n");
 		nuke(ep, -EPIPE);
@@ -2212,7 +2376,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 {
 	struct resource *regs;
 	struct pxa_udc *udc = &memory;
-	int retval;
+	int retval = 0, gpio;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!regs)
@@ -2223,6 +2387,20 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 
 	udc->dev = &pdev->dev;
 	udc->mach = pdev->dev.platform_data;
+	udc->transceiver = otg_get_transceiver();
+
+	gpio = udc->mach->gpio_pullup;
+	if (gpio_is_valid(gpio)) {
+		retval = gpio_request(gpio, "USB D+ pullup");
+		if (retval == 0)
+			gpio_direction_output(gpio,
+				       udc->mach->gpio_pullup_inverted);
+	}
+	if (retval) {
+		dev_err(&pdev->dev, "Couldn't request gpio %d : %d\n",
+			gpio, retval);
+		return retval;
+	}
 
 	udc->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk)) {
@@ -2240,6 +2418,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 	device_initialize(&udc->gadget.dev);
 	udc->gadget.dev.parent = &pdev->dev;
 	udc->gadget.dev.dma_mask = NULL;
+	udc->vbus_sensed = 0;
 
 	the_controller = udc;
 	platform_set_drvdata(pdev, udc);
@@ -2273,14 +2452,21 @@ err_clk:
 static int __exit pxa_udc_remove(struct platform_device *_dev)
 {
 	struct pxa_udc *udc = platform_get_drvdata(_dev);
+	int gpio = udc->mach->gpio_pullup;
 
 	usb_gadget_unregister_driver(udc->driver);
 	free_irq(udc->irq, udc);
 	pxa_cleanup_debugfs(udc);
+	if (gpio_is_valid(gpio))
+		gpio_free(gpio);
+
+	otg_put_transceiver(udc->transceiver);
 
+	udc->transceiver = NULL;
 	platform_set_drvdata(_dev, NULL);
 	the_controller = NULL;
 	clk_put(udc->clk);
+	iounmap(udc->regs);
 
 	return 0;
 }
@@ -2319,6 +2505,8 @@ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state)
 	}
 
 	udc_disable(udc);
+	udc->pullup_resume = udc->pullup_on;
+	dplus_pullup(udc, 0);
 
 	return 0;
 }
@@ -2346,7 +2534,9 @@ static int pxa_udc_resume(struct platform_device *_dev)
 				ep->udccsr_value, ep->udccr_value);
 	}
 
-	udc_enable(udc);
+	dplus_pullup(udc, udc->pullup_resume);
+	if (should_enable_udc(udc))
+		udc_enable(udc);
 	/*
 	 * We do not handle OTG yet.
 	 *
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 1d1b7936ee11..db58125331da 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/usb/otg.h>
 
 /*
  * Register definitions
@@ -421,10 +422,14 @@ struct udc_stats {
  * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
  * @dev: device
  * @mach: machine info, used to activate specific GPIO
+ * @transceiver: external transceiver to handle vbus sense and D+ pullup
  * @ep0state: control endpoint state machine state
  * @stats: statistics on udc usage
  * @udc_usb_ep: array of usb endpoints offered by the gadget
  * @pxa_ep: array of pxa available endpoints
+ * @enabled: UDC was enabled by a previous udc_enable()
+ * @pullup_on: if pullup resistor connected to D+ pin
+ * @pullup_resume: if pullup resistor should be connected to D+ pin on resume
  * @config: UDC active configuration
  * @last_interface: UDC interface of the last SET_INTERFACE host request
  * @last_alternate: UDC altsetting of the last SET_INTERFACE host request
@@ -443,6 +448,7 @@ struct pxa_udc {
 	struct usb_gadget_driver		*driver;
 	struct device				*dev;
 	struct pxa2xx_udc_mach_info		*mach;
+	struct otg_transceiver			*transceiver;
 
 	enum ep0_state				ep0state;
 	struct udc_stats			stats;
@@ -450,6 +456,10 @@ struct pxa_udc {
 	struct udc_usb_ep			udc_usb_ep[NR_USB_ENDPOINTS];
 	struct pxa_ep				pxa_ep[NR_PXA_ENDPOINTS];
 
+	unsigned				enabled:1;
+	unsigned				pullup_on:1;
+	unsigned				pullup_resume:1;
+	unsigned				vbus_sensed:1;
 	unsigned				config:2;
 	unsigned				last_interface:3;
 	unsigned				last_alternate:3;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 8c26f5ea2b83..2b4660e08c4d 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -63,7 +63,7 @@ MODULE_PARM_DESC (rndis_debug, "enable debugging");
 static rndis_params rndis_per_dev_params [RNDIS_MAX_CONFIGS];
 
 /* Driver Version */
-static const __le32 rndis_driver_version = __constant_cpu_to_le32 (1);
+static const __le32 rndis_driver_version = cpu_to_le32 (1);
 
 /* Function Prototypes */
 static rndis_resp_t *rndis_add_response (int configNr, u32 length);
@@ -170,7 +170,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 	int			i, count;
 	rndis_query_cmplt_type	*resp;
 	struct net_device	*net;
-	struct net_device_stats	*stats;
+	const struct net_device_stats	*stats;
 
 	if (!r) return -ENOMEM;
 	resp = (rndis_query_cmplt_type *) r->buf;
@@ -190,13 +190,10 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 
 	/* response goes here, right after the header */
 	outbuf = (__le32 *) &resp[1];
-	resp->InformationBufferOffset = __constant_cpu_to_le32 (16);
+	resp->InformationBufferOffset = cpu_to_le32 (16);
 
 	net = rndis_per_dev_params[configNr].dev;
-	if (net->get_stats)
-		stats = net->get_stats(net);
-	else
-		stats = NULL;
+	stats = dev_get_stats(net);
 
 	switch (OID) {
 
@@ -221,7 +218,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 		 * reddite ergo quae sunt Caesaris Caesari
 		 * et quae sunt Dei Deo!
 		 */
-		*outbuf = __constant_cpu_to_le32 (0);
+		*outbuf = cpu_to_le32 (0);
 		retval = 0;
 		break;
 
@@ -256,7 +253,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 			pr_debug("%s: OID_GEN_LINK_SPEED\n", __func__);
 		if (rndis_per_dev_params [configNr].media_state
 				== NDIS_MEDIA_STATE_DISCONNECTED)
-			*outbuf = __constant_cpu_to_le32 (0);
+			*outbuf = cpu_to_le32 (0);
 		else
 			*outbuf = cpu_to_le32 (
 				rndis_per_dev_params [configNr].speed);
@@ -317,7 +314,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 	/* mandatory */
 	case OID_GEN_MAXIMUM_TOTAL_SIZE:
 		pr_debug("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__);
-		*outbuf = __constant_cpu_to_le32(RNDIS_MAX_TOTAL_SIZE);
+		*outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE);
 		retval = 0;
 		break;
 
@@ -332,7 +329,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 
 	case OID_GEN_PHYSICAL_MEDIUM:
 		pr_debug("%s: OID_GEN_PHYSICAL_MEDIUM\n", __func__);
-		*outbuf = __constant_cpu_to_le32 (0);
+		*outbuf = cpu_to_le32 (0);
 		retval = 0;
 		break;
 
@@ -342,7 +339,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 	 */
 	case OID_GEN_MAC_OPTIONS:		/* from WinME */
 		pr_debug("%s: OID_GEN_MAC_OPTIONS\n", __func__);
-		*outbuf = __constant_cpu_to_le32(
+		*outbuf = cpu_to_le32(
 			  NDIS_MAC_OPTION_RECEIVE_SERIALIZED
 			| NDIS_MAC_OPTION_FULL_DUPLEX);
 		retval = 0;
@@ -431,7 +428,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 	case OID_802_3_MULTICAST_LIST:
 		pr_debug("%s: OID_802_3_MULTICAST_LIST\n", __func__);
 		/* Multicast base address only */
-		*outbuf = __constant_cpu_to_le32 (0xE0000000);
+		*outbuf = cpu_to_le32 (0xE0000000);
 		retval = 0;
 		break;
 
@@ -439,7 +436,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 	case OID_802_3_MAXIMUM_LIST_SIZE:
 		pr_debug("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __func__);
 		/* Multicast base address only */
-		*outbuf = __constant_cpu_to_le32 (1);
+		*outbuf = cpu_to_le32 (1);
 		retval = 0;
 		break;
 
@@ -461,14 +458,14 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 	/* mandatory */
 	case OID_802_3_XMIT_ONE_COLLISION:
 		pr_debug("%s: OID_802_3_XMIT_ONE_COLLISION\n", __func__);
-		*outbuf = __constant_cpu_to_le32 (0);
+		*outbuf = cpu_to_le32 (0);
 		retval = 0;
 		break;
 
 	/* mandatory */
 	case OID_802_3_XMIT_MORE_COLLISIONS:
 		pr_debug("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __func__);
-		*outbuf = __constant_cpu_to_le32 (0);
+		*outbuf = cpu_to_le32 (0);
 		retval = 0;
 		break;
 
@@ -572,24 +569,24 @@ static int rndis_init_response (int configNr, rndis_init_msg_type *buf)
 		return -ENOMEM;
 	resp = (rndis_init_cmplt_type *) r->buf;
 
-	resp->MessageType = __constant_cpu_to_le32 (
+	resp->MessageType = cpu_to_le32 (
 			REMOTE_NDIS_INITIALIZE_CMPLT);
-	resp->MessageLength = __constant_cpu_to_le32 (52);
+	resp->MessageLength = cpu_to_le32 (52);
 	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
-	resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
-	resp->MajorVersion = __constant_cpu_to_le32 (RNDIS_MAJOR_VERSION);
-	resp->MinorVersion = __constant_cpu_to_le32 (RNDIS_MINOR_VERSION);
-	resp->DeviceFlags = __constant_cpu_to_le32 (RNDIS_DF_CONNECTIONLESS);
-	resp->Medium = __constant_cpu_to_le32 (RNDIS_MEDIUM_802_3);
-	resp->MaxPacketsPerTransfer = __constant_cpu_to_le32 (1);
+	resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+	resp->MajorVersion = cpu_to_le32 (RNDIS_MAJOR_VERSION);
+	resp->MinorVersion = cpu_to_le32 (RNDIS_MINOR_VERSION);
+	resp->DeviceFlags = cpu_to_le32 (RNDIS_DF_CONNECTIONLESS);
+	resp->Medium = cpu_to_le32 (RNDIS_MEDIUM_802_3);
+	resp->MaxPacketsPerTransfer = cpu_to_le32 (1);
 	resp->MaxTransferSize = cpu_to_le32 (
 		  params->dev->mtu
 		+ sizeof (struct ethhdr)
 		+ sizeof (struct rndis_packet_msg_type)
 		+ 22);
-	resp->PacketAlignmentFactor = __constant_cpu_to_le32 (0);
-	resp->AFListOffset = __constant_cpu_to_le32 (0);
-	resp->AFListSize = __constant_cpu_to_le32 (0);
+	resp->PacketAlignmentFactor = cpu_to_le32 (0);
+	resp->AFListOffset = cpu_to_le32 (0);
+	resp->AFListSize = cpu_to_le32 (0);
 
 	params->resp_avail(params->v);
 	return 0;
@@ -617,7 +614,7 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
 		return -ENOMEM;
 	resp = (rndis_query_cmplt_type *) r->buf;
 
-	resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT);
+	resp->MessageType = cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT);
 	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
 
 	if (gen_ndis_query_resp (configNr, le32_to_cpu (buf->OID),
@@ -626,13 +623,13 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
 			le32_to_cpu(buf->InformationBufferLength),
 			r)) {
 		/* OID not supported */
-		resp->Status = __constant_cpu_to_le32 (
+		resp->Status = cpu_to_le32 (
 				RNDIS_STATUS_NOT_SUPPORTED);
-		resp->MessageLength = __constant_cpu_to_le32 (sizeof *resp);
-		resp->InformationBufferLength = __constant_cpu_to_le32 (0);
-		resp->InformationBufferOffset = __constant_cpu_to_le32 (0);
+		resp->MessageLength = cpu_to_le32 (sizeof *resp);
+		resp->InformationBufferLength = cpu_to_le32 (0);
+		resp->InformationBufferOffset = cpu_to_le32 (0);
 	} else
-		resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+		resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
 
 	params->resp_avail(params->v);
 	return 0;
@@ -665,14 +662,14 @@ static int rndis_set_response (int configNr, rndis_set_msg_type *buf)
 	pr_debug("\n");
 #endif
 
-	resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_SET_CMPLT);
-	resp->MessageLength = __constant_cpu_to_le32 (16);
+	resp->MessageType = cpu_to_le32 (REMOTE_NDIS_SET_CMPLT);
+	resp->MessageLength = cpu_to_le32 (16);
 	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
 	if (gen_ndis_set_resp (configNr, le32_to_cpu (buf->OID),
 			((u8 *) buf) + 8 + BufOffset, BufLength, r))
-		resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED);
+		resp->Status = cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED);
 	else
-		resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+		resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
 
 	params->resp_avail(params->v);
 	return 0;
@@ -689,11 +686,11 @@ static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf)
 		return -ENOMEM;
 	resp = (rndis_reset_cmplt_type *) r->buf;
 
-	resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT);
-	resp->MessageLength = __constant_cpu_to_le32 (16);
-	resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+	resp->MessageType = cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT);
+	resp->MessageLength = cpu_to_le32 (16);
+	resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
 	/* resent information */
-	resp->AddressingReset = __constant_cpu_to_le32 (1);
+	resp->AddressingReset = cpu_to_le32 (1);
 
 	params->resp_avail(params->v);
 	return 0;
@@ -713,11 +710,11 @@ static int rndis_keepalive_response (int configNr,
 		return -ENOMEM;
 	resp = (rndis_keepalive_cmplt_type *) r->buf;
 
-	resp->MessageType = __constant_cpu_to_le32 (
+	resp->MessageType = cpu_to_le32 (
 			REMOTE_NDIS_KEEPALIVE_CMPLT);
-	resp->MessageLength = __constant_cpu_to_le32 (16);
+	resp->MessageLength = cpu_to_le32 (16);
 	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
-	resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+	resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
 
 	params->resp_avail(params->v);
 	return 0;
@@ -742,12 +739,12 @@ static int rndis_indicate_status_msg (int configNr, u32 status)
 		return -ENOMEM;
 	resp = (rndis_indicate_status_msg_type *) r->buf;
 
-	resp->MessageType = __constant_cpu_to_le32 (
+	resp->MessageType = cpu_to_le32 (
 			REMOTE_NDIS_INDICATE_STATUS_MSG);
-	resp->MessageLength = __constant_cpu_to_le32 (20);
+	resp->MessageLength = cpu_to_le32 (20);
 	resp->Status = cpu_to_le32 (status);
-	resp->StatusBufferLength = __constant_cpu_to_le32 (0);
-	resp->StatusBufferOffset = __constant_cpu_to_le32 (0);
+	resp->StatusBufferLength = cpu_to_le32 (0);
+	resp->StatusBufferOffset = cpu_to_le32 (0);
 
 	params->resp_avail(params->v);
 	return 0;
@@ -963,9 +960,9 @@ void rndis_add_hdr (struct sk_buff *skb)
 		return;
 	header = (void *) skb_push (skb, sizeof *header);
 	memset (header, 0, sizeof *header);
-	header->MessageType = __constant_cpu_to_le32(REMOTE_NDIS_PACKET_MSG);
+	header->MessageType = cpu_to_le32(REMOTE_NDIS_PACKET_MSG);
 	header->MessageLength = cpu_to_le32(skb->len);
-	header->DataOffset = __constant_cpu_to_le32 (36);
+	header->DataOffset = cpu_to_le32 (36);
 	header->DataLength = cpu_to_le32(skb->len - sizeof *header);
 }
 
@@ -1029,7 +1026,7 @@ int rndis_rm_hdr(struct sk_buff *skb)
 	__le32		*tmp = (void *) skb->data;
 
 	/* MessageType, MessageLength */
-	if (__constant_cpu_to_le32(REMOTE_NDIS_PACKET_MSG)
+	if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG)
 			!= get_unaligned(tmp++))
 		return -EINVAL;
 	tmp++;
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 37879af1c433..f46a60962dab 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -87,12 +87,12 @@ static struct usb_gadget_strings *dev_strings[] = {
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 	/* .bDeviceClass = f(use_acm) */
 	.bDeviceSubClass =	0,
 	.bDeviceProtocol =	0,
 	/* .bMaxPacketSize0 = f(hardware) */
-	.idVendor =		__constant_cpu_to_le16(GS_VENDOR_ID),
+	.idVendor =		cpu_to_le16(GS_VENDOR_ID),
 	/* .idProduct =	f(use_acm) */
 	/* .bcdDevice = f(hardware) */
 	/* .iManufacturer = DYNAMIC */
@@ -216,7 +216,7 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 		pr_warning("gs_bind: controller '%s' not recognized\n",
 			gadget->name);
 		device_desc.bcdDevice =
-			__constant_cpu_to_le16(GS_VERSION_NUM | 0x0099);
+			cpu_to_le16(GS_VERSION_NUM | 0x0099);
 	}
 
 	if (gadget_is_otg(cdev->gadget)) {
@@ -255,19 +255,19 @@ static int __init init(void)
 		serial_config_driver.bConfigurationValue = 2;
 		device_desc.bDeviceClass = USB_CLASS_COMM;
 		device_desc.idProduct =
-				__constant_cpu_to_le16(GS_CDC_PRODUCT_ID);
+				cpu_to_le16(GS_CDC_PRODUCT_ID);
 	} else if (use_obex) {
 		serial_config_driver.label = "CDC OBEX config";
 		serial_config_driver.bConfigurationValue = 3;
 		device_desc.bDeviceClass = USB_CLASS_COMM;
 		device_desc.idProduct =
-			__constant_cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
+			cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
 	} else {
 		serial_config_driver.label = "Generic Serial config";
 		serial_config_driver.bConfigurationValue = 1;
 		device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
 		device_desc.idProduct =
-				__constant_cpu_to_le16(GS_PRODUCT_ID);
+				cpu_to_le16(GS_PRODUCT_ID);
 	}
 	strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
 
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 53d59287f2bc..0a4d99ab40d8 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1092,7 +1092,7 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
 	gs_tty_driver->init_termios.c_ispeed = 9600;
 	gs_tty_driver->init_termios.c_ospeed = 9600;
 
-	coding.dwDTERate = __constant_cpu_to_le32(9600);
+	coding.dwDTERate = cpu_to_le32(9600);
 	coding.bCharFormat = 8;
 	coding.bParityType = USB_CDC_NO_PARITY;
 	coding.bDataBits = USB_CDC_1_STOP_BITS;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 361d9659ac48..2d772401b7ad 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -102,22 +102,32 @@ module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
 #ifndef	CONFIG_USB_ZERO_HNPTEST
 #define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
 #define DRIVER_PRODUCT_NUM	0xa4a0		/* Linux-USB "Gadget Zero" */
+#define DEFAULT_AUTORESUME	0
 #else
 #define DRIVER_VENDOR_NUM	0x1a0a		/* OTG test device IDs */
 #define DRIVER_PRODUCT_NUM	0xbadd
+#define DEFAULT_AUTORESUME	5
 #endif
 
+/* If the optional "autoresume" mode is enabled, it provides good
+ * functional coverage for the "USBCV" test harness from USB-IF.
+ * It's always set if OTG mode is enabled.
+ */
+unsigned autoresume = DEFAULT_AUTORESUME;
+module_param(autoresume, uint, S_IRUGO);
+MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
+
 /*-------------------------------------------------------------------------*/
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		__constant_cpu_to_le16(0x0200),
+	.bcdUSB =		cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
 
-	.idVendor =		__constant_cpu_to_le16(DRIVER_VENDOR_NUM),
-	.idProduct =		__constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
+	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_NUM),
 	.bNumConfigurations =	2,
 };
 
@@ -212,6 +222,47 @@ void disable_endpoints(struct usb_composite_dev *cdev,
 
 /*-------------------------------------------------------------------------*/
 
+static struct timer_list	autoresume_timer;
+
+static void zero_autoresume(unsigned long _c)
+{
+	struct usb_composite_dev	*cdev = (void *)_c;
+	struct usb_gadget		*g = cdev->gadget;
+
+	/* unconfigured devices can't issue wakeups */
+	if (!cdev->config)
+		return;
+
+	/* Normally the host would be woken up for something
+	 * more significant than just a timer firing; likely
+	 * because of some direct user request.
+	 */
+	if (g->speed != USB_SPEED_UNKNOWN) {
+		int status = usb_gadget_wakeup(g);
+		INFO(cdev, "%s --> %d\n", __func__, status);
+	}
+}
+
+static void zero_suspend(struct usb_composite_dev *cdev)
+{
+	if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
+		return;
+
+	if (autoresume) {
+		mod_timer(&autoresume_timer, jiffies + (HZ * autoresume));
+		DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
+	} else
+		DBG(cdev, "%s\n", __func__);
+}
+
+static void zero_resume(struct usb_composite_dev *cdev)
+{
+	DBG(cdev, "%s\n", __func__);
+	del_timer(&autoresume_timer);
+}
+
+/*-------------------------------------------------------------------------*/
+
 static int __init zero_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
@@ -239,17 +290,19 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	strings_dev[STRING_SERIAL_IDX].id = id;
 	device_desc.iSerialNumber = id;
 
+	setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
+
 	/* Register primary, then secondary configuration.  Note that
 	 * SH3 only allows one config...
 	 */
 	if (loopdefault) {
-		loopback_add(cdev);
+		loopback_add(cdev, autoresume != 0);
 		if (!gadget_is_sh(gadget))
-			sourcesink_add(cdev);
+			sourcesink_add(cdev, autoresume != 0);
 	} else {
-		sourcesink_add(cdev);
+		sourcesink_add(cdev, autoresume != 0);
 		if (!gadget_is_sh(gadget))
-			loopback_add(cdev);
+			loopback_add(cdev, autoresume != 0);
 	}
 
 	gcnum = usb_gadget_controller_number(gadget);
@@ -265,7 +318,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 		 */
 		pr_warning("%s: controller '%s' not recognized\n",
 			longname, gadget->name);
-		device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
+		device_desc.bcdDevice = cpu_to_le16(0x9999);
 	}
 
 
@@ -278,11 +331,20 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
+static int zero_unbind(struct usb_composite_dev *cdev)
+{
+	del_timer_sync(&autoresume_timer);
+	return 0;
+}
+
 static struct usb_composite_driver zero_driver = {
 	.name		= "zero",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.bind		= zero_bind,
+	.unbind		= zero_unbind,
+	.suspend	= zero_suspend,
+	.resume		= zero_resume,
 };
 
 MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2c63bfb1f8d9..845479f7c707 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -24,10 +24,7 @@ config USB_EHCI_HCD
 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
 	  If your USB host controller supports USB 2.0, you will likely want to
-	  configure this Host Controller Driver.  At the time of this writing, 
-	  the primary implementation of EHCI is a chip from NEC, widely available
-	  in add-on PCI cards, but implementations are in the works from other 
-	  vendors including Intel and Philips.  Motherboard support is appearing.
+	  configure this Host Controller Driver.
 
 	  EHCI controllers are packaged with "companion" host controllers (OHCI
 	  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
@@ -123,7 +120,7 @@ config USB_ISP116X_HCD
 
 config USB_ISP1760_HCD
 	tristate "ISP 1760 HCD support"
-	depends on USB && EXPERIMENTAL && (PCI || PPC_OF)
+	depends on USB && EXPERIMENTAL
 	---help---
 	  The ISP1760 chip is a USB 2.0 host controller.
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e551bb38852b..f2618d17710d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -110,6 +110,42 @@ MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
 
 /*-------------------------------------------------------------------------*/
 
+static void
+timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action)
+{
+	/* Don't override timeouts which shrink or (later) disable
+	 * the async ring; just the I/O watchdog.  Note that if a
+	 * SHRINK were pending, OFF would never be requested.
+	 */
+	if (timer_pending(&ehci->watchdog)
+			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+				& ehci->actions))
+		return;
+
+	if (!test_and_set_bit(action, &ehci->actions)) {
+		unsigned long t;
+
+		switch (action) {
+		case TIMER_IO_WATCHDOG:
+			t = EHCI_IO_JIFFIES;
+			break;
+		case TIMER_ASYNC_OFF:
+			t = EHCI_ASYNC_JIFFIES;
+			break;
+		/* case TIMER_ASYNC_SHRINK: */
+		default:
+			/* add a jiffie since we synch against the
+			 * 8 KHz uframe counter.
+			 */
+			t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
+			break;
+		}
+		mod_timer(&ehci->watchdog, t + jiffies);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
 /*
  * handshake - spin reading hc until handshake completes or fails
  * @ptr: address of hc register to be read
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index ecc9b66c03cd..1976b1b3778c 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -333,12 +333,40 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		token = hc32_to_cpu(ehci, qtd->hw_token);
 
 		/* always clean up qtds the hc de-activated */
+ retry_xacterr:
 		if ((token & QTD_STS_ACTIVE) == 0) {
 
 			/* on STALL, error, and short reads this urb must
 			 * complete and all its qtds must be recycled.
 			 */
 			if ((token & QTD_STS_HALT) != 0) {
+
+				/* retry transaction errors until we
+				 * reach the software xacterr limit
+				 */
+				if ((token & QTD_STS_XACT) &&
+						QTD_CERR(token) == 0 &&
+						--qh->xacterrs > 0 &&
+						!urb->unlinked) {
+					ehci_dbg(ehci,
+	"detected XactErr len %zu/%zu retry %d\n",
+	qtd->length - QTD_LENGTH(token), qtd->length,
+	QH_XACTERR_MAX - qh->xacterrs);
+
+					/* reset the token in the qtd and the
+					 * qh overlay (which still contains
+					 * the qtd) so that we pick up from
+					 * where we left off
+					 */
+					token &= ~QTD_STS_HALT;
+					token |= QTD_STS_ACTIVE |
+							(EHCI_TUNE_CERR << 10);
+					qtd->hw_token = cpu_to_hc32(ehci,
+							token);
+					wmb();
+					qh->hw_token = cpu_to_hc32(ehci, token);
+					goto retry_xacterr;
+				}
 				stopped = 1;
 
 			/* magic dummy for some short reads; qh won't advance.
@@ -421,6 +449,9 @@ halt:
 		/* remove qtd; it's recycled after possible urb completion */
 		list_del (&qtd->qtd_list);
 		last = qtd;
+
+		/* reinit the xacterr counter for the next qtd */
+		qh->xacterrs = QH_XACTERR_MAX;
 	}
 
 	/* last urb's completion might still need calling */
@@ -862,6 +893,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	head->qh_next.qh = qh;
 	head->hw_next = dma;
 
+	qh->xacterrs = QH_XACTERR_MAX;
 	qh->qh_state = QH_STATE_LINKED;
 	/* qtd completions reported later by interrupt */
 }
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 1d0b49e3f192..ada5d2ba297b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -563,7 +563,7 @@ static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	//   and this qh is active in the current uframe
 	//   (and overlay token SplitXstate is false?)
 	// THEN
-	//   qh->hw_info1 |= __constant_cpu_to_hc32(1 << 7 /* "ignore" */);
+	//   qh->hw_info1 |= cpu_to_hc32(1 << 7 /* "ignore" */);
 
 	/* high bandwidth, or otherwise part of every microframe */
 	if ((period = qh->period) == 0)
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 262b00c9b334..6cff195e1a36 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -190,40 +190,6 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
 	clear_bit (action, &ehci->actions);
 }
 
-static inline void
-timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
-{
-	/* Don't override timeouts which shrink or (later) disable
-	 * the async ring; just the I/O watchdog.  Note that if a
-	 * SHRINK were pending, OFF would never be requested.
-	 */
-	if (timer_pending(&ehci->watchdog)
-			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
-				& ehci->actions))
-		return;
-
-	if (!test_and_set_bit (action, &ehci->actions)) {
-		unsigned long t;
-
-		switch (action) {
-		case TIMER_IO_WATCHDOG:
-			t = EHCI_IO_JIFFIES;
-			break;
-		case TIMER_ASYNC_OFF:
-			t = EHCI_ASYNC_JIFFIES;
-			break;
-		// case TIMER_ASYNC_SHRINK:
-		default:
-			/* add a jiffie since we synch against the
-			 * 8 KHz uframe counter.
-			 */
-			t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
-			break;
-		}
-		mod_timer(&ehci->watchdog, t + jiffies);
-	}
-}
-
 static void free_cached_itd_list(struct ehci_hcd *ehci);
 
 /*-------------------------------------------------------------------------*/
@@ -287,7 +253,7 @@ struct ehci_qtd {
 
 /*
  * Now the following defines are not converted using the
- * __constant_cpu_to_le32() macro anymore, since we have to support
+ * cpu_to_le32() macro anymore, since we have to support
  * "dynamic" switching between be and le support, so that the driver
  * can be used on one system with SoC EHCI controller using big-endian
  * descriptors as well as a normal little-endian PCI EHCI controller.
@@ -376,6 +342,9 @@ struct ehci_qh {
 #define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on reclaim q */
 #define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
 
+	u8			xacterrs;	/* XactErr retry counter */
+#define	QH_XACTERR_MAX		32		/* XactErr retry limit */
+
 	/* periodic schedule info */
 	u8			usecs;		/* intr bandwidth */
 	u8			gap_uf;		/* uframes split/csplit gap */
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index 34e14edf390b..ea8a4255c5da 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -108,7 +108,7 @@ void fhci_dfs_create(struct fhci_hcd *fhci)
 {
 	struct device *dev = fhci_to_hcd(fhci)->self.controller;
 
-	fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+	fhci->dfs_root = debugfs_create_dir(dev_name(dev), NULL);
 	if (!fhci->dfs_root) {
 		WARN_ON(1);
 		return;
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index ba622cc8a9ba..0951818ef93b 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -583,7 +583,7 @@ static int __devinit of_fhci_probe(struct of_device *ofdev,
 	if (sprop && strcmp(sprop, "host"))
 		return -ENODEV;
 
-	hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+	hcd = usb_create_hcd(&fhci_driver, dev, dev_name(dev));
 	if (!hcd) {
 		dev_err(dev, "could not create hcd\n");
 		return -ENOMEM;
@@ -650,7 +650,7 @@ static int __devinit of_fhci_probe(struct of_device *ofdev,
 			}
 		}
 
-		ret = gpio_request(gpio, dev->bus_id);
+		ret = gpio_request(gpio, dev_name(dev));
 		if (ret) {
 			dev_err(dev, "failed to request gpio %d", i);
 			goto err_gpios;
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 8582236e4cad..cbf30e515f29 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -464,8 +464,7 @@ static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
 			port_idx << 8 | iface_no,
 			keyd, keyd_len, 1000 /* FIXME: arbitrary */);
 
-	memset(keyd, 0, sizeof(*keyd));	/* clear keys etc. */
-	kfree(keyd);
+	kzfree(keyd); /* clear keys etc. */
 	return result;
 }
 
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 4dda31b26892..a2b305477afe 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -772,7 +772,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
 		break;
 	case PIPE_INTERRUPT:
 		urb->interval = ep->period;
-		ep->length = min((int)ep->maxpacket,
+		ep->length = min_t(u32, ep->maxpacket,
 				 urb->transfer_buffer_length);
 
 		/* urb submitted for already existing endpoint */
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index aa211bafcff9..12db961acdfb 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -563,7 +563,7 @@ static void urb_dbg(struct urb *urb, char *msg)
 */
 static inline void dump_ptd(struct ptd *ptd)
 {
-	printk("td: %x %d%c%d %d,%d,%d  %x %x%x%x\n",
+	printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d  %x %x%x%x\n",
 	       PTD_GET_CC(ptd), PTD_GET_FA(ptd),
 	       PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
 	       PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
@@ -576,7 +576,7 @@ static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf)
 	int k;
 
 	if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
-		printk("-> ");
+		printk(KERN_WARNING "-> ");
 		for (k = 0; k < PTD_GET_LEN(ptd); ++k)
 			printk("%02x ", ((u8 *) buf)[k]);
 		printk("\n");
@@ -588,13 +588,13 @@ static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf)
 	int k;
 
 	if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
-		printk("<- ");
+		printk(KERN_WARNING "<- ");
 		for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
 			printk("%02x ", ((u8 *) buf)[k]);
 		printk("\n");
 	}
 	if (PTD_GET_LAST(ptd))
-		printk("-\n");
+		printk(KERN_WARNING "-\n");
 }
 
 #else
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index b899f1a59c26..cd07ea3f0c63 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -644,7 +644,7 @@ static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
 
 	if (urb->dev->speed != USB_SPEED_HIGH) {
 		/* split */
-		ptd->dw5 = __constant_cpu_to_le32(0x1c);
+		ptd->dw5 = cpu_to_le32(0x1c);
 
 		if (qh->period >= 32)
 			period = qh->period / 2;
@@ -819,6 +819,13 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 	u32 atl_regs, payload;
 	u32 buffstatus;
 
+	/*
+	 * When this function is called from the interrupt handler to enqueue
+	 * a follow-up packet, the SKIP register gets written and read back
+	 * almost immediately. With ISP1761, this register requires a delay of
+	 * 195ns between a write and subsequent read (see section 15.1.1.3).
+	 */
+	ndelay(195);
 	skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
 
 	BUG_ON(!skip_map);
@@ -853,6 +860,13 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 	u32 int_regs, payload;
 	u32 buffstatus;
 
+	/*
+	 * When this function is called from the interrupt handler to enqueue
+	 * a follow-up packet, the SKIP register gets written and read back
+	 * almost immediately. With ISP1761, this register requires a delay of
+	 * 195ns between a write and subsequent read (see section 15.1.1.3).
+	 */
+	ndelay(195);
 	skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG);
 
 	BUG_ON(!skip_map);
@@ -1054,7 +1068,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
 					atl_regs, sizeof(ptd));
 
-			ptd.dw0 |= __constant_cpu_to_le32(PTD_VALID);
+			ptd.dw0 |= cpu_to_le32(PTD_VALID);
 			priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
 					atl_regs, sizeof(ptd));
 
@@ -2235,9 +2249,10 @@ void deinit_kmem_cache(void)
 	kmem_cache_destroy(qh_cachep);
 }
 
-struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
-		u64 irqflags, struct device *dev, const char *busname,
-		unsigned int devflags)
+struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
+				 int irq, unsigned long irqflags,
+				 struct device *dev, const char *busname,
+				 unsigned int devflags)
 {
 	struct usb_hcd *hcd;
 	struct isp1760_hcd *priv;
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index a9daea587962..462f4943cb1b 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -2,9 +2,10 @@
 #define _ISP1760_HCD_H_
 
 /* exports for if */
-struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
-		u64 irqflags, struct device *dev, const char *busname,
-		unsigned int devflags);
+struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
+				 int irq, unsigned long irqflags,
+				 struct device *dev, const char *busname,
+				 unsigned int devflags);
 int init_kmem_once(void);
 void deinit_kmem_cache(void);
 
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 4cf7ca428b33..3fa3a1702796 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -10,6 +10,7 @@
 
 #include <linux/usb.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include "../core/hcd.h"
 #include "isp1760-hcd.h"
@@ -300,39 +301,101 @@ static struct pci_driver isp1761_pci_driver = {
 };
 #endif
 
+static int __devinit isp1760_plat_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct usb_hcd *hcd;
+	struct resource *mem_res;
+	struct resource *irq_res;
+	resource_size_t mem_size;
+	unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		pr_warning("isp1760: Memory resource not available\n");
+		ret = -ENODEV;
+		goto out;
+	}
+	mem_size = resource_size(mem_res);
+	if (!request_mem_region(mem_res->start, mem_size, "isp1760")) {
+		pr_warning("isp1760: Cannot reserve the memory resource\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res) {
+		pr_warning("isp1760: IRQ resource not available\n");
+		return -ENODEV;
+	}
+	irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
+
+	hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
+			       irqflags, &pdev->dev, dev_name(&pdev->dev), 0);
+	if (IS_ERR(hcd)) {
+		pr_warning("isp1760: Failed to register the HCD device\n");
+		ret = -ENODEV;
+		goto cleanup;
+	}
+
+	pr_info("ISP1760 USB device initialised\n");
+	return ret;
+
+cleanup:
+	release_mem_region(mem_res->start, mem_size);
+out:
+	return ret;
+}
+
+static int __devexit isp1760_plat_remove(struct platform_device *pdev)
+{
+	struct resource *mem_res;
+	resource_size_t mem_size;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mem_size = resource_size(mem_res);
+	release_mem_region(mem_res->start, mem_size);
+
+	return 0;
+}
+
+static struct platform_driver isp1760_plat_driver = {
+	.probe	= isp1760_plat_probe,
+	.remove	= isp1760_plat_remove,
+	.driver	= {
+		.name	= "isp1760",
+	},
+};
+
 static int __init isp1760_init(void)
 {
-	int ret;
+	int ret, any_ret = -ENODEV;
 
 	init_kmem_once();
 
+	ret = platform_driver_register(&isp1760_plat_driver);
+	if (!ret)
+		any_ret = 0;
 #ifdef CONFIG_PPC_OF
 	ret = of_register_platform_driver(&isp1760_of_driver);
-	if (ret) {
-		deinit_kmem_cache();
-		return ret;
-	}
+	if (!ret)
+		any_ret = 0;
 #endif
 #ifdef CONFIG_PCI
 	ret = pci_register_driver(&isp1761_pci_driver);
-	if (ret)
-		goto unreg_of;
+	if (!ret)
+		any_ret = 0;
 #endif
-	return ret;
 
-#ifdef CONFIG_PCI
-unreg_of:
-#endif
-#ifdef CONFIG_PPC_OF
-	of_unregister_platform_driver(&isp1760_of_driver);
-#endif
-	deinit_kmem_cache();
-	return ret;
+	if (any_ret)
+		deinit_kmem_cache();
+	return any_ret;
 }
 module_init(isp1760_init);
 
 static void __exit isp1760_exit(void)
 {
+	platform_driver_unregister(&isp1760_plat_driver);
 #ifdef CONFIG_PPC_OF
 	of_unregister_platform_driver(&isp1760_of_driver);
 #endif
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5cf5f1eca4f4..25db704f3a2a 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -997,7 +997,7 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#ifdef CONFIG_ARCH_S3C2410
+#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
 #include "ohci-s3c2410.c"
 #define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
 #endif
@@ -1049,7 +1049,8 @@ MODULE_LICENSE ("GPL");
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763)
+    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7786)
 #include "ohci-sh.c"
 #define PLATFORM_DRIVER		ohci_hcd_sh_driver
 #endif
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index f46af7a718d4..a68af2dd55ca 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -21,9 +21,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <mach/usb-control.h>
+#include <plat/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
@@ -372,7 +370,7 @@ static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 
 	usb_clk = clk_get(&dev->dev, "usb-bus-host");
 	if (IS_ERR(usb_clk)) {
-		dev_err(&dev->dev, "cannot get usb-host clock\n");
+		dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
 		retval = -ENOENT;
 		goto err_clk;
 	}
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 75548f7c716b..5ac489ee3dab 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -845,14 +845,14 @@ static inline void qh_update(struct oxu_hcd *oxu,
 		is_out = !(qtd->hw_token & cpu_to_le32(1 << 8));
 		epnum = (le32_to_cpup(&qh->hw_info1) >> 8) & 0x0f;
 		if (unlikely(!usb_gettoggle(qh->dev, epnum, is_out))) {
-			qh->hw_token &= ~__constant_cpu_to_le32(QTD_TOGGLE);
+			qh->hw_token &= ~cpu_to_le32(QTD_TOGGLE);
 			usb_settoggle(qh->dev, epnum, is_out, 1);
 		}
 	}
 
 	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
 	wmb();
-	qh->hw_token &= __constant_cpu_to_le32(QTD_TOGGLE | QTD_STS_PING);
+	qh->hw_token &= cpu_to_le32(QTD_TOGGLE | QTD_STS_PING);
 }
 
 /* If it weren't for a common silicon quirk (writing the dummy into the qh
@@ -937,7 +937,7 @@ __acquires(oxu->lock)
 		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;
 
 		/* S-mask in a QH means it's an interrupt urb */
-		if ((qh->hw_info2 & __constant_cpu_to_le32(QH_SMASK)) != 0) {
+		if ((qh->hw_info2 & cpu_to_le32(QH_SMASK)) != 0) {
 
 			/* ... update hc-wide periodic stats (for usbfs) */
 			oxu_to_hcd(oxu)->self.bandwidth_int_reqs--;
@@ -981,7 +981,7 @@ static void unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh);
 static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
 static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
 
-#define HALT_BIT __constant_cpu_to_le32(QTD_STS_HALT)
+#define HALT_BIT cpu_to_le32(QTD_STS_HALT)
 
 /* Process and free completed qtds for a qh, returning URBs to drivers.
  * Chases up to qh->hw_current.  Returns number of completions called,
@@ -1160,7 +1160,7 @@ halt:
 			/* should be rare for periodic transfers,
 			 * except maybe high bandwidth ...
 			 */
-			if ((__constant_cpu_to_le32(QH_SMASK)
+			if ((cpu_to_le32(QH_SMASK)
 					& qh->hw_info2) != 0) {
 				intr_deschedule(oxu, qh);
 				(void) qh_schedule(oxu, qh);
@@ -1350,7 +1350,7 @@ static struct list_head *qh_urb_transaction(struct oxu_hcd *oxu,
 	}
 
 	/* by default, enable interrupt on urb completion */
-		qtd->hw_token |= __constant_cpu_to_le32(QTD_IOC);
+		qtd->hw_token |= cpu_to_le32(QTD_IOC);
 	return head;
 
 cleanup:
@@ -1539,7 +1539,7 @@ static void qh_link_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
 	/* qtd completions reported later by interrupt */
 }
 
-#define	QH_ADDR_MASK	__constant_cpu_to_le32(0x7f)
+#define	QH_ADDR_MASK	cpu_to_le32(0x7f)
 
 /*
  * For control/bulk/interrupt, return QH with these TDs appended.
@@ -2012,7 +2012,7 @@ static void qh_unlink_periodic(struct oxu_hcd *oxu, struct ehci_qh *qh)
 	 *   and this qh is active in the current uframe
 	 *   (and overlay token SplitXstate is false?)
 	 * THEN
-	 *   qh->hw_info1 |= __constant_cpu_to_le32(1 << 7 "ignore");
+	 *   qh->hw_info1 |= cpu_to_le32(1 << 7 "ignore");
 	 */
 
 	/* high bandwidth, or otherwise part of every microframe */
@@ -2057,7 +2057,7 @@ static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
 	 * active high speed queues may need bigger delays...
 	 */
 	if (list_empty(&qh->qtd_list)
-		|| (__constant_cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0)
+		|| (cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0)
 		wait = 2;
 	else
 		wait = 55;	/* worst case: 3 * 1024 */
@@ -2183,10 +2183,10 @@ static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
 		qh->start = frame;
 
 		/* reset S-frame and (maybe) C-frame masks */
-		qh->hw_info2 &= __constant_cpu_to_le32(~(QH_CMASK | QH_SMASK));
+		qh->hw_info2 &= cpu_to_le32(~(QH_CMASK | QH_SMASK));
 		qh->hw_info2 |= qh->period
 			? cpu_to_le32(1 << uframe)
-			: __constant_cpu_to_le32(QH_SMASK);
+			: cpu_to_le32(QH_SMASK);
 		qh->hw_info2 |= c_mask;
 	} else
 		oxu_dbg(oxu, "reused qh %p schedule\n", qh);
@@ -2684,7 +2684,7 @@ static int oxu_reset(struct usb_hcd *hcd)
 	oxu->urb_len = 0;
 
 	/* FIMXE */
-	hcd->self.controller->dma_mask = 0UL;
+	hcd->self.controller->dma_mask = NULL;
 
 	if (oxu->is_otg) {
 		oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET;
diff --git a/drivers/usb/host/oxu210hp.h b/drivers/usb/host/oxu210hp.h
index 8910e271cc7d..1c216ad9aad2 100644
--- a/drivers/usb/host/oxu210hp.h
+++ b/drivers/usb/host/oxu210hp.h
@@ -235,21 +235,21 @@ struct ehci_qtd {
 } __attribute__ ((aligned(32)));
 
 /* mask NakCnt+T in qh->hw_alt_next */
-#define QTD_MASK __constant_cpu_to_le32 (~0x1f)
+#define QTD_MASK cpu_to_le32 (~0x1f)
 
 #define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
 
 /* Type tag from {qh, itd, sitd, fstn}->hw_next */
-#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1))
+#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1))
 
 /* values for that type tag */
-#define Q_TYPE_QH	__constant_cpu_to_le32 (1 << 1)
+#define Q_TYPE_QH	cpu_to_le32 (1 << 1)
 
 /* next async queue entry, or pointer to interrupt/periodic QH */
 #define	QH_NEXT(dma)	(cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
 
 /* for periodic/async schedules and qtd lists, mark end of list */
-#define	EHCI_LIST_END	__constant_cpu_to_le32(1) /* "null pointer" to hw */
+#define	EHCI_LIST_END	cpu_to_le32(1) /* "null pointer" to hw */
 
 /*
  * Entries in periodic shadow table are pointers to one of four kinds
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 75b69847918e..033c2846ce59 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -234,7 +234,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 	 */
 	hcc_params = readl(base + EHCI_HCC_PARAMS);
 	offset = (hcc_params >> 8) & 0xff;
-	while (offset && count--) {
+	while (offset && --count) {
 		u32		cap;
 		int		msec;
 
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 319041205b57..f1626e58c141 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -660,9 +660,9 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
 	u16 array[R8A66597_MAX_NUM_PIPE], i = 0, min;
 
 	memset(array, 0, sizeof(array));
-	switch (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(ep)) {
 	case USB_ENDPOINT_XFER_BULK:
-		if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		if (usb_endpoint_dir_in(ep))
 			array[i++] = 4;
 		else {
 			array[i++] = 3;
@@ -670,7 +670,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
 		}
 		break;
 	case USB_ENDPOINT_XFER_INT:
-		if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
+		if (usb_endpoint_dir_in(ep)) {
 			array[i++] = 6;
 			array[i++] = 7;
 			array[i++] = 8;
@@ -678,7 +678,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
 			array[i++] = 9;
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
-		if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		if (usb_endpoint_dir_in(ep))
 			array[i++] = 2;
 		else
 			array[i++] = 1;
@@ -928,10 +928,9 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
 
 	info.pipenum = get_empty_pipenum(r8a66597, ep);
 	info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
-	info.epnum = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	info.epnum = usb_endpoint_num(ep);
 	info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
-	info.type = get_r8a66597_type(ep->bmAttributes
-				      & USB_ENDPOINT_XFERTYPE_MASK);
+	info.type = get_r8a66597_type(usb_endpoint_type(ep));
 	info.bufnum = get_bufnum(info.pipenum);
 	info.buf_bsize = get_buf_bsize(info.pipenum);
 	if (info.type == R8A66597_BULK) {
@@ -941,7 +940,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
 		info.interval = get_interval(urb, ep->bInterval);
 		info.timer_interval = get_timer_interval(urb, ep->bInterval);
 	}
-	if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+	if (usb_endpoint_dir_in(ep))
 		info.dir_in = 1;
 	else
 		info.dir_in = 0;
@@ -1014,6 +1013,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 
 	r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
 	r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
+
+	if (r8a66597->bus_suspended)
+		usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
 }
 
 /* this function must be called with interrupt disabled */
@@ -1395,7 +1397,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
 			   (int)urb->iso_frame_desc[td->iso_cnt].length);
 	} else {
 		buf = (u16 *)(urb->transfer_buffer + urb->actual_length);
-		size = min((int)bufsize,
+		size = min_t(u32, bufsize,
 			   urb->transfer_buffer_length - urb->actual_length);
 	}
 
@@ -1615,6 +1617,11 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, DTCHE, INTENB2);
 			r8a66597_usb_disconnect(r8a66597, 1);
 		}
+		if (mask2 & BCHG) {
+			r8a66597_write(r8a66597, ~BCHG, INTSTS2);
+			r8a66597_bclr(r8a66597, BCHGE, INTENB2);
+			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+		}
 	}
 
 	if (mask1) {
@@ -1630,6 +1637,12 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, DTCHE, INTENB1);
 			r8a66597_usb_disconnect(r8a66597, 0);
 		}
+		if (mask1 & BCHG) {
+			r8a66597_write(r8a66597, ~BCHG, INTSTS1);
+			r8a66597_bclr(r8a66597, BCHGE, INTENB1);
+			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+		}
+
 		if (mask1 & SIGN) {
 			r8a66597_write(r8a66597, ~SIGN, INTSTS1);
 			status = get_urb_error(r8a66597, 0);
@@ -2141,7 +2154,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		switch (wValue) {
 		case USB_PORT_FEAT_ENABLE:
-			rh->port &= (1 << USB_PORT_FEAT_POWER);
+			rh->port &= ~(1 << USB_PORT_FEAT_POWER);
 			break;
 		case USB_PORT_FEAT_SUSPEND:
 			break;
@@ -2213,6 +2226,68 @@ error:
 	return ret;
 }
 
+#if defined(CONFIG_PM)
+static int r8a66597_bus_suspend(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	int port;
+
+	dbg("%s", __func__);
+
+	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+		unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+		if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE)))
+			continue;
+
+		dbg("suspend port = %d", port);
+		r8a66597_bclr(r8a66597, UACT, dvstctr_reg);	/* suspend */
+		rh->port |= 1 << USB_PORT_FEAT_SUSPEND;
+
+		if (rh->dev->udev->do_remote_wakeup) {
+			msleep(3);	/* waiting last SOF */
+			r8a66597_bset(r8a66597, RWUPE, dvstctr_reg);
+			r8a66597_write(r8a66597, ~BCHG, get_intsts_reg(port));
+			r8a66597_bset(r8a66597, BCHGE, get_intenb_reg(port));
+		}
+	}
+
+	r8a66597->bus_suspended = 1;
+
+	return 0;
+}
+
+static int r8a66597_bus_resume(struct usb_hcd *hcd)
+{
+	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+	int port;
+
+	dbg("%s", __func__);
+
+	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+		unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+		if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND)))
+			continue;
+
+		dbg("resume port = %d", port);
+		rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND);
+		rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND;
+		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
+		msleep(50);
+		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
+	}
+
+	return 0;
+
+}
+#else
+#define	r8a66597_bus_suspend	NULL
+#define	r8a66597_bus_resume	NULL
+#endif
+
 static struct hc_driver r8a66597_hc_driver = {
 	.description =		hcd_name,
 	.hcd_priv_size =	sizeof(struct r8a66597),
@@ -2243,16 +2318,39 @@ static struct hc_driver r8a66597_hc_driver = {
 	 */
 	.hub_status_data =	r8a66597_hub_status_data,
 	.hub_control =		r8a66597_hub_control,
+	.bus_suspend =		r8a66597_bus_suspend,
+	.bus_resume =		r8a66597_bus_resume,
 };
 
 #if defined(CONFIG_PM)
 static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state)
 {
+	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+	int port;
+
+	dbg("%s", __func__);
+
+	disable_controller(r8a66597);
+
+	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+		rh->port = 0x00000000;
+	}
+
 	return 0;
 }
 
 static int r8a66597_resume(struct platform_device *pdev)
 {
+	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+	struct usb_hcd		*hcd = r8a66597_to_hcd(r8a66597);
+
+	dbg("%s", __func__);
+
+	enable_controller(r8a66597);
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
 	return 0;
 }
 #else	/* if defined(CONFIG_PM) */
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index ecacde4d69b0..f49208f1bb74 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -504,6 +504,8 @@ struct r8a66597 {
 
 	struct list_head child_device;
 	unsigned long child_connect_map[4];
+
+	unsigned bus_suspended:1;
 };
 
 static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index e106e9d48d4a..a949259f18b9 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -230,7 +230,7 @@ static void in_packet(
 	writeb(usb_pipedevice(urb->pipe), data_reg);
 
 	sl811_write(sl811, bank + SL11H_HOSTCTLREG, control);
-	ep->length = min((int)len,
+	ep->length = min_t(u32, len,
 			urb->transfer_buffer_length - urb->actual_length);
 	PACKET("IN%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "",
 			!!usb_gettoggle(urb->dev, ep->epnum, 0), ep, len);
@@ -255,7 +255,7 @@ static void out_packet(
 	buf = urb->transfer_buffer + urb->actual_length;
 	prefetch(buf);
 
-	len = min((int)ep->maxpacket,
+	len = min_t(u32, ep->maxpacket,
 			urb->transfer_buffer_length - urb->actual_length);
 
 	if (!(control & SL11H_HCTLMASK_ISOCH)
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 20cc58b97807..e52b954dda47 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -118,7 +118,9 @@ static int uhci_show_urbp(struct urb_priv *urbp, char *buf, int len, int space)
 	}
 
 	out += sprintf(out, "%s%s", ptype, (urbp->fsbr ? " FSBR" : ""));
-	out += sprintf(out, " Actlen=%d", urbp->urb->actual_length);
+	out += sprintf(out, " Actlen=%d%s", urbp->urb->actual_length,
+			(urbp->qh->type == USB_ENDPOINT_XFER_CONTROL ?
+				"-8" : ""));
 
 	if (urbp->urb->unlinked)
 		out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked);
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 7d01c5677f92..26bd1b2bcbfc 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -73,11 +73,11 @@
 #define   USBLEGSUP_RWC		0x8f00	/* the R/WC bits */
 #define   USBLEGSUP_RO		0x5040	/* R/O and reserved bits */
 
-#define UHCI_PTR_BITS		__constant_cpu_to_le32(0x000F)
-#define UHCI_PTR_TERM		__constant_cpu_to_le32(0x0001)
-#define UHCI_PTR_QH		__constant_cpu_to_le32(0x0002)
-#define UHCI_PTR_DEPTH		__constant_cpu_to_le32(0x0004)
-#define UHCI_PTR_BREADTH	__constant_cpu_to_le32(0x0000)
+#define UHCI_PTR_BITS		cpu_to_le32(0x000F)
+#define UHCI_PTR_TERM		cpu_to_le32(0x0001)
+#define UHCI_PTR_QH		cpu_to_le32(0x0002)
+#define UHCI_PTR_DEPTH		cpu_to_le32(0x0004)
+#define UHCI_PTR_BREADTH	cpu_to_le32(0x0000)
 
 #define UHCI_NUMFRAMES		1024	/* in the frame list [array] */
 #define UHCI_MAX_SOF_NUMBER	2047	/* in an SOF packet */
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 5631d89c8730..3e5807d14ffb 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -402,7 +402,7 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first)
 		/* Otherwise all the toggles in the URB have to be switched */
 		} else {
 			list_for_each_entry(td, &urbp->td_list, list) {
-				td->token ^= __constant_cpu_to_le32(
+				td->token ^= cpu_to_le32(
 							TD_TOKEN_TOGGLE);
 				toggle ^= 1;
 			}
@@ -883,7 +883,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 
 	uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0);
 	wmb();
-	qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE);
+	qh->dummy_td->status |= cpu_to_le32(TD_CTRL_ACTIVE);
 	qh->dummy_td = td;
 
 	/* Low-speed transfers get a different queue, and won't hog the bus.
@@ -899,8 +899,6 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 	}
 	if (qh->state != QH_STATE_ACTIVE)
 		qh->skel = skel;
-
-	urb->actual_length = -8;	/* Account for the SETUP packet */
 	return 0;
 
 nomem:
@@ -1003,7 +1001,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
 	 * fast side but not enough to justify delaying an interrupt
 	 * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
 	 * flag setting. */
-	td->status |= __constant_cpu_to_le32(TD_CTRL_IOC);
+	td->status |= cpu_to_le32(TD_CTRL_IOC);
 
 	/*
 	 * Build the new dummy TD and activate the old one
@@ -1015,7 +1013,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
 
 	uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0);
 	wmb();
-	qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE);
+	qh->dummy_td->status |= cpu_to_le32(TD_CTRL_ACTIVE);
 	qh->dummy_td = td;
 
 	usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
@@ -1317,7 +1315,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
 	}
 
 	/* Set the interrupt-on-completion flag on the last packet. */
-	td->status |= __constant_cpu_to_le32(TD_CTRL_IOC);
+	td->status |= cpu_to_le32(TD_CTRL_IOC);
 
 	/* Add the TDs to the frame list */
 	frame = urb->start_frame;
@@ -1494,11 +1492,10 @@ __acquires(uhci->lock)
 
 	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
 
-		/* urb->actual_length < 0 means the setup transaction didn't
-		 * complete successfully.  Either it failed or the URB was
-		 * unlinked first.  Regardless, don't confuse people with a
-		 * negative length. */
-		urb->actual_length = max(urb->actual_length, 0);
+		/* Subtract off the length of the SETUP packet from
+		 * urb->actual_length.
+		 */
+		urb->actual_length -= min_t(u32, 8, urb->actual_length);
 	}
 
 	/* When giving back the first URB in an Isochronous queue,
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 972f20b3406c..eca355dccf65 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -188,7 +188,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
 		.bDescriptorType =	0,
 		.bEndpointAddress =	0x01,
 		.bmAttributes = 	0x02,
-		.wMaxPacketSize =	__constant_cpu_to_le16(8),
+		.wMaxPacketSize =	cpu_to_le16(8),
 		.bInterval = 		0,
 		.bRefresh = 		0,
 		.bSynchAddress = 	0,
@@ -198,7 +198,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
 		.bDescriptorType = 	0,
 		.bEndpointAddress = 	0x82,
 		.bmAttributes = 	0x03,
-		.wMaxPacketSize = 	__constant_cpu_to_le16(8),
+		.wMaxPacketSize = 	cpu_to_le16(8),
 		.bInterval = 		0,
 		.bRefresh = 		0,
 		.bSynchAddress = 	0,
@@ -208,7 +208,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
 		.bDescriptorType = 	0,
 		.bEndpointAddress = 	0x03,
 		.bmAttributes = 	0x02,
-		.wMaxPacketSize = 	__constant_cpu_to_le16(64),
+		.wMaxPacketSize = 	cpu_to_le16(64),
 		.bInterval = 		0,
 		.bRefresh = 		0,
 		.bSynchAddress = 	0,
@@ -218,7 +218,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
 		.bDescriptorType = 	0,
 		.bEndpointAddress = 	0x84,
 		.bmAttributes = 	0x02,
-		.wMaxPacketSize = 	__constant_cpu_to_le16(64),
+		.wMaxPacketSize = 	cpu_to_le16(64),
 		.bInterval = 		0,
 		.bRefresh = 		0,
 		.bSynchAddress = 	0,
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index e463db5d8188..a68d91a11bee 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -135,45 +135,6 @@ config USB_CYTHERM
 	  To compile this driver as a module, choose M here: the
 	  module will be called cytherm.
 
-config USB_PHIDGET
-	tristate "USB Phidgets drivers"
-	depends on USB
-	help
-	  Say Y here to enable the various drivers for devices from
-	  Phidgets inc.
-
-config USB_PHIDGETKIT
-	tristate "USB PhidgetInterfaceKit support"
-	depends on USB_PHIDGET
-	help
-	  Say Y here if you want to connect a PhidgetInterfaceKit USB device
-	  from Phidgets Inc.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phidgetkit.
-
-config USB_PHIDGETMOTORCONTROL
-	tristate "USB PhidgetMotorControl support"
-	depends on USB_PHIDGET
-	help
-	  Say Y here if you want to connect a PhidgetMotorControl USB device
-	  from Phidgets Inc.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phidgetmotorcontrol.
-
-config USB_PHIDGETSERVO
-	tristate "USB PhidgetServo support"
-	depends on USB_PHIDGET
-	help
-	  Say Y here if you want to connect an 1 or 4 Motor PhidgetServo 
-	  servo controller version 2.0 or 3.0.
-
-	  Phidgets Inc. has a web page at <http://www.phidgets.com/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phidgetservo.
-
 config USB_IDMOUSE
 	tristate "Siemens ID USB Mouse Fingerprint sensor support"
 	depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 1334f7bdd7be..0826aab8303f 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -18,10 +18,6 @@ obj-$(CONFIG_USB_LCD)		+= usblcd.o
 obj-$(CONFIG_USB_LD)		+= ldusb.o
 obj-$(CONFIG_USB_LED)		+= usbled.o
 obj-$(CONFIG_USB_LEGOTOWER)	+= legousbtower.o
-obj-$(CONFIG_USB_PHIDGET)	+= phidget.o
-obj-$(CONFIG_USB_PHIDGETKIT)	+= phidgetkit.o
-obj-$(CONFIG_USB_PHIDGETMOTORCONTROL)	+= phidgetmotorcontrol.o
-obj-$(CONFIG_USB_PHIDGETSERVO)	+= phidgetservo.o
 obj-$(CONFIG_USB_RIO500)	+= rio500.o
 obj-$(CONFIG_USB_TEST)		+= usbtest.o
 obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 79a7668ef264..9d0675ed0d4c 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -1568,7 +1568,7 @@ static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number,
                         struct u132_target *target = &ftdi->target[ed];
                         struct u132_command *command = &ftdi->command[
                                 COMMAND_MASK & ftdi->command_next];
-                        int remaining_length = urb->transfer_buffer_length -
+                        u32 remaining_length = urb->transfer_buffer_length -
                                 urb->actual_length;
                         command->header = 0x82 | (ed << 5);
                         if (remaining_length == 0) {
@@ -1702,7 +1702,7 @@ static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number,
                                 | (address << 0);
                         command->width = usb_maxpacket(urb->dev, urb->pipe,
                                 usb_pipeout(urb->pipe));
-                        command->follows = min(1024,
+                        command->follows = min_t(u32, 1024,
                                 urb->transfer_buffer_length -
                                 urb->actual_length);
                         command->value = 0;
@@ -1766,7 +1766,7 @@ static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number,
                 mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
-                        int remaining_length = urb->transfer_buffer_length -
+                        u32 remaining_length = urb->transfer_buffer_length -
                                 urb->actual_length;
                         struct u132_target *target = &ftdi->target[ed];
                         struct u132_command *command = &ftdi->command[
diff --git a/drivers/usb/misc/phidget.c b/drivers/usb/misc/phidget.c
deleted file mode 100644
index 735ed33f4f7f..000000000000
--- a/drivers/usb/misc/phidget.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * USB Phidgets class
- *
- * Copyright (C) 2006  Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/device.h>
-
-struct class *phidget_class;
-
-static int __init init_phidget(void)
-{
-	phidget_class = class_create(THIS_MODULE, "phidget");
-
-	if (IS_ERR(phidget_class))
-		return PTR_ERR(phidget_class);
-
-	return 0;
-}
-
-static void __exit cleanup_phidget(void)
-{
-	class_destroy(phidget_class);
-}
-
-EXPORT_SYMBOL_GPL(phidget_class);
-
-module_init(init_phidget);
-module_exit(cleanup_phidget);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sean Young <sean@mess.org>");
-MODULE_DESCRIPTION("Container module for phidget class");
-
diff --git a/drivers/usb/misc/phidget.h b/drivers/usb/misc/phidget.h
deleted file mode 100644
index c4011907d431..000000000000
--- a/drivers/usb/misc/phidget.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * USB Phidgets class
- *
- * Copyright (C) 2006  Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-extern struct class *phidget_class;
diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
deleted file mode 100644
index cc8e0a926f99..000000000000
--- a/drivers/usb/misc/phidgetkit.c
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * USB PhidgetInterfaceKit driver 1.0
- *
- * Copyright (C) 2004, 2006 Sean Young <sean@mess.org>
- * Copyright (C) 2005 Daniel Saakes <daniel@saakes.net>
- * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is a driver for the USB PhidgetInterfaceKit.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-#include "phidget.h"
-
-#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
-#define DRIVER_DESC "USB PhidgetInterfaceKit Driver"
-
-#define USB_VENDOR_ID_GLAB		0x06c2
-#define USB_DEVICE_ID_INTERFACEKIT004	0x0040
-#define USB_DEVICE_ID_INTERFACEKIT01616	0x0044
-#define USB_DEVICE_ID_INTERFACEKIT888	0x0045
-#define USB_DEVICE_ID_INTERFACEKIT047	0x0051
-#define USB_DEVICE_ID_INTERFACEKIT088	0x0053
-
-#define USB_VENDOR_ID_WISEGROUP		0x0925
-#define USB_DEVICE_ID_INTERFACEKIT884	0x8201
-
-#define MAX_INTERFACES			16
-
-#define URB_INT_SIZE			8
-
-struct driver_interfacekit {
-	int sensors;
-	int inputs;
-	int outputs;
-	int has_lcd;
-	int amnesiac;
-};
-
-#define ifkit(_sensors, _inputs, _outputs, _lcd, _amnesiac)		\
-{									\
-	.sensors	= _sensors,					\
-	.inputs		= _inputs,					\
-	.outputs	= _outputs,					\
-	.has_lcd	= _lcd,						\
-	.amnesiac	= _amnesiac					\
-};
-
-static const struct driver_interfacekit ph_004 = ifkit(0, 0, 4, 0, 0);
-static const struct driver_interfacekit ph_888n = ifkit(8, 8, 8, 0, 1);
-static const struct driver_interfacekit ph_888o = ifkit(8, 8, 8, 0, 0);
-static const struct driver_interfacekit ph_047 = ifkit(0, 4, 7, 1, 0);
-static const struct driver_interfacekit ph_884 = ifkit(8, 8, 4, 0, 0);
-static const struct driver_interfacekit ph_088 = ifkit(0, 8, 8, 1, 0);
-static const struct driver_interfacekit ph_01616 = ifkit(0, 16, 16, 0, 0);
-
-static unsigned long device_no;
-
-struct interfacekit {
-	struct usb_device *udev;
-	struct usb_interface *intf;
-	struct driver_interfacekit *ifkit;
-	struct device *dev;
-	unsigned long outputs;
-	int dev_no;
-	u8 inputs[MAX_INTERFACES];
-	u16 sensors[MAX_INTERFACES];
-	u8 lcd_files_on;
-
-	struct urb *irq;
-	unsigned char *data;
-	dma_addr_t data_dma;
-
-	struct delayed_work do_notify;
-	struct delayed_work do_resubmit;
-	unsigned long input_events;
-	unsigned long sensor_events;
-};
-
-static struct usb_device_id id_table[] = {
-	{USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT004),
-		.driver_info = (kernel_ulong_t)&ph_004},
-	{USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0, 0x814),
-		.driver_info = (kernel_ulong_t)&ph_888o},
-	{USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0x0815, 0xffff),
-		.driver_info = (kernel_ulong_t)&ph_888n},
-	{USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT047),
-		.driver_info = (kernel_ulong_t)&ph_047},
-	{USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT088),
-		.driver_info = (kernel_ulong_t)&ph_088},
-	{USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT01616),
-		.driver_info = (kernel_ulong_t)&ph_01616},
-	{USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_INTERFACEKIT884),
-		.driver_info = (kernel_ulong_t)&ph_884},
-	{}
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static int set_outputs(struct interfacekit *kit)
-{
-	u8 *buffer;
-	int retval;
-
-	buffer = kzalloc(4, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
-		return -ENOMEM;
-	}
-	buffer[0] = (u8)kit->outputs;
-	buffer[1] = (u8)(kit->outputs >> 8);
-
-	dev_dbg(&kit->udev->dev, "sending data: 0x%04x\n", (u16)kit->outputs);
-
-	retval = usb_control_msg(kit->udev,
-			 usb_sndctrlpipe(kit->udev, 0),
-			 0x09, 0x21, 0x0200, 0x0000, buffer, 4, 2000);
-
-	if (retval != 4)
-		dev_err(&kit->udev->dev, "usb_control_msg returned %d\n", 
-				retval);
-	kfree(buffer);
-
-	if (kit->ifkit->amnesiac)
-		schedule_delayed_work(&kit->do_resubmit, HZ / 2);
-
-	return retval < 0 ? retval : 0;
-}
-
-static int change_string(struct interfacekit *kit, const char *display, unsigned char row)
-{
-	unsigned char *buffer;
-	unsigned char *form_buffer;
-	int retval = -ENOMEM;
-	int i,j, len, buf_ptr;
-	
-	buffer = kmalloc(8, GFP_KERNEL);
-	form_buffer = kmalloc(30, GFP_KERNEL);
-	if ((!buffer) || (!form_buffer)) {
-		dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
-		goto exit;
-	}
-
-	len = strlen(display);
-	if (len > 20)
-		len = 20;
-
-	dev_dbg(&kit->udev->dev, "Setting LCD line %d to %s\n", row, display);
-
-	form_buffer[0] = row * 0x40 + 0x80;
-	form_buffer[1] = 0x02;
-	buf_ptr = 2;
-	for (i = 0; i<len; i++)
-		form_buffer[buf_ptr++] = display[i];
-
-	for (i = 0; i < (20 - len); i++)
-		form_buffer[buf_ptr++] = 0x20;
-	form_buffer[buf_ptr++] = 0x01;
-	form_buffer[buf_ptr++] = row * 0x40 + 0x80 + strlen(display);
-
-	for (i = 0; i < buf_ptr; i += 7) {
-		if ((buf_ptr - i) > 7)
-			len = 7;
-		else
-			len = (buf_ptr - i);
-		for (j = 0; j < len; j++)
-			buffer[j] = form_buffer[i + j];
-		buffer[7] = len;
-
-		retval = usb_control_msg(kit->udev,
-				 usb_sndctrlpipe(kit->udev, 0),
-				 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000);
-		if (retval < 0)
-			goto exit;
-	}
-
-	retval = 0;
-exit:
-	kfree(buffer);
-	kfree(form_buffer);
-
-	return retval;
-}
-
-#define set_lcd_line(number)	\
-static ssize_t lcd_line_##number(struct device *dev,			\
-					struct device_attribute *attr,	\
-					const char *buf, size_t count)	\
-{									\
-	struct interfacekit *kit = dev_get_drvdata(dev);		\
-	change_string(kit, buf, number - 1);				\
-	return count;							\
-}
-
-#define lcd_line_attr(number)						\
-	__ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number)
-
-set_lcd_line(1);
-set_lcd_line(2);
-
-static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct interfacekit *kit = dev_get_drvdata(dev);
-	int enabled;
-	unsigned char *buffer;
-	int retval = -ENOMEM;
-	
-	buffer = kzalloc(8, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
-		goto exit;
-	}
-
-	if (sscanf(buf, "%d", &enabled) < 1) {
-		retval = -EINVAL;
-		goto exit;
-	}
-	if (enabled)
-		buffer[0] = 0x01;
-	buffer[7] = 0x11;
-
-	dev_dbg(&kit->udev->dev, "Setting backlight to %s\n", enabled ? "on" : "off");
-	
-	retval = usb_control_msg(kit->udev,
-			 usb_sndctrlpipe(kit->udev, 0),
-			 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000);
-	if (retval < 0)
-		goto exit;
-
-	retval = count;
-exit:
-	kfree(buffer);
-	return retval;
-}
-
-static struct device_attribute dev_lcd_line_attrs[] = {
-	lcd_line_attr(1),
-	lcd_line_attr(2),
-	__ATTR(backlight, S_IWUGO, NULL, set_backlight)
-};
-
-static void remove_lcd_files(struct interfacekit *kit)
-{
-	int i;
-
-	if (kit->lcd_files_on) {
-		dev_dbg(&kit->udev->dev, "Removing lcd files\n");
-
-		for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++)
-			device_remove_file(kit->dev, &dev_lcd_line_attrs[i]);
-	}
-}
-
-static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct interfacekit *kit = dev_get_drvdata(dev);
-	int enable;
-	int i, rc;
-	
-	if (kit->ifkit->has_lcd == 0)
-		return -ENODEV;
-
-	if (sscanf(buf, "%d", &enable) < 1)
-		return -EINVAL;
-
-	if (enable) {
-		if (!kit->lcd_files_on) {
-			dev_dbg(&kit->udev->dev, "Adding lcd files\n");
-			for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++) {
-				rc = device_create_file(kit->dev,
-					&dev_lcd_line_attrs[i]);
-				if (rc)
-					goto out;
-			}
-			kit->lcd_files_on = 1;
-		}
-	} else {
-		if (kit->lcd_files_on) {
-			remove_lcd_files(kit);
-			kit->lcd_files_on = 0;
-		}
-	}
-	
-	return count;
-out:
-	while (i-- > 0)
-		device_remove_file(kit->dev, &dev_lcd_line_attrs[i]);
-
-	return rc;
-}
-
-static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files);
-
-static void interfacekit_irq(struct urb *urb)
-{
-	struct interfacekit *kit = urb->context;
-	unsigned char *buffer = kit->data;
-	int i, level, sensor;
-	int retval;
-	int status = urb->status;
-
-	switch (status) {
-	case 0:			/* success */
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	/* -EPIPE:  should clear the halt */
-	default:		/* error */
-		goto resubmit;
-	}
-
-	/* digital inputs */
-	if (kit->ifkit->inputs == 16) {
-		for (i=0; i < 8; i++) {
-			level = (buffer[0] >> i) & 1;
-			if (kit->inputs[i] != level) {
-				kit->inputs[i] = level;
-				set_bit(i, &kit->input_events);
-			}
-			level = (buffer[1] >> i) & 1;
-			if (kit->inputs[8 + i] != level) {
-				kit->inputs[8 + i] = level;
-				set_bit(8 + i, &kit->input_events);
-			}
-		}
-	}
-	else if (kit->ifkit->inputs == 8) {
-		for (i=0; i < 8; i++) {
-			level = (buffer[1] >> i) & 1;
-			if (kit->inputs[i] != level) {
-				kit->inputs[i] = level;
-				set_bit(i, &kit->input_events);
-			}
-		}
-	}
-
-	/* analog inputs */
-	if (kit->ifkit->sensors) {
-		sensor = (buffer[0] & 1) ? 4 : 0;
-
-		level = buffer[2] + (buffer[3] & 0x0f) * 256;
-		if (level != kit->sensors[sensor]) {
-			kit->sensors[sensor] = level;
-			set_bit(sensor, &kit->sensor_events);
-		}
-		sensor++;
-		level = buffer[4] + (buffer[3] & 0xf0) * 16;
-		if (level != kit->sensors[sensor]) {
-			kit->sensors[sensor] = level;
-			set_bit(sensor, &kit->sensor_events);
-		}
-		sensor++;
-		level = buffer[5] + (buffer[6] & 0x0f) * 256;
-		if (level != kit->sensors[sensor]) {
-			kit->sensors[sensor] = level;
-			set_bit(sensor, &kit->sensor_events);
-		}
-		sensor++;
-		level = buffer[7] + (buffer[6] & 0xf0) * 16;
-		if (level != kit->sensors[sensor]) {
-			kit->sensors[sensor] = level;
-			set_bit(sensor, &kit->sensor_events);
-		}
-	}
-
-	if (kit->input_events || kit->sensor_events)
-		schedule_delayed_work(&kit->do_notify, 0);
-
-resubmit:
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
-		err("can't resubmit intr, %s-%s/interfacekit0, retval %d",
-			kit->udev->bus->bus_name,
-			kit->udev->devpath, retval);
-}
-
-static void do_notify(struct work_struct *work)
-{
-	struct interfacekit *kit =
-		container_of(work, struct interfacekit, do_notify.work);
-	int i;
-	char sysfs_file[8];
-
-	for (i=0; i<kit->ifkit->inputs; i++) {
-		if (test_and_clear_bit(i, &kit->input_events)) {
-			sprintf(sysfs_file, "input%d", i + 1);
-			sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
-		}
-	}
-
-	for (i=0; i<kit->ifkit->sensors; i++) {
-		if (test_and_clear_bit(i, &kit->sensor_events)) {
-			sprintf(sysfs_file, "sensor%d", i + 1);
-			sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
-		}
-	}
-}
-
-static void do_resubmit(struct work_struct *work)
-{
-	struct interfacekit *kit =
-		container_of(work, struct interfacekit, do_resubmit.work);
-	set_outputs(kit);
-}
-
-#define show_set_output(value)		\
-static ssize_t set_output##value(struct device *dev,			\
-					struct device_attribute *attr,	\
-					const char *buf, size_t count)	\
-{									\
-	struct interfacekit *kit = dev_get_drvdata(dev);		\
-	int enable;							\
-	int retval;							\
-									\
-	if (sscanf(buf, "%d", &enable) < 1)				\
-		return -EINVAL;						\
-									\
-	if (enable)							\
-		set_bit(value - 1, &kit->outputs);			\
-	else								\
-		clear_bit(value - 1, &kit->outputs); 			\
-									\
-	retval = set_outputs(kit);					\
-									\
-	return retval ? retval : count;					\
-}									\
-									\
-static ssize_t show_output##value(struct device *dev, 			\
-					struct device_attribute *attr,	\
-					char *buf)			\
-{									\
-	struct interfacekit *kit = dev_get_drvdata(dev);		\
-									\
-	return sprintf(buf, "%d\n", !!test_bit(value - 1, &kit->outputs));\
-}
-
-#define output_attr(value)						\
-	__ATTR(output##value, S_IWUGO | S_IRUGO,			\
-		show_output##value, set_output##value)
-
-show_set_output(1);
-show_set_output(2);
-show_set_output(3);
-show_set_output(4);
-show_set_output(5);
-show_set_output(6);
-show_set_output(7);
-show_set_output(8);
-show_set_output(9);
-show_set_output(10);
-show_set_output(11);
-show_set_output(12);
-show_set_output(13);
-show_set_output(14);
-show_set_output(15);
-show_set_output(16);
-
-static struct device_attribute dev_output_attrs[] = {
-	output_attr(1), output_attr(2), output_attr(3), output_attr(4),
-	output_attr(5), output_attr(6), output_attr(7), output_attr(8),
-	output_attr(9), output_attr(10), output_attr(11), output_attr(12),
-	output_attr(13), output_attr(14), output_attr(15), output_attr(16)
-};
-
-#define show_input(value)	\
-static ssize_t show_input##value(struct device *dev, 			\
-			struct device_attribute *attr, char *buf)	\
-{									\
-	struct interfacekit *kit = dev_get_drvdata(dev);		\
-									\
-	return sprintf(buf, "%d\n", (int)kit->inputs[value - 1]);	\
-}
-
-#define input_attr(value)						\
-	__ATTR(input##value, S_IRUGO, show_input##value, NULL)
-
-show_input(1);
-show_input(2);
-show_input(3);
-show_input(4);
-show_input(5);
-show_input(6);
-show_input(7);
-show_input(8);
-show_input(9);
-show_input(10);
-show_input(11);
-show_input(12);
-show_input(13);
-show_input(14);
-show_input(15);
-show_input(16);
-
-static struct device_attribute dev_input_attrs[] = {
-	input_attr(1), input_attr(2), input_attr(3), input_attr(4),
-	input_attr(5), input_attr(6), input_attr(7), input_attr(8),
-	input_attr(9), input_attr(10), input_attr(11), input_attr(12),
-	input_attr(13), input_attr(14), input_attr(15), input_attr(16)
-};
-
-#define show_sensor(value)	\
-static ssize_t show_sensor##value(struct device *dev,			\
-					struct device_attribute *attr,	\
-					char *buf)			\
-{									\
-	struct interfacekit *kit = dev_get_drvdata(dev);		\
-									\
-	return sprintf(buf, "%d\n", (int)kit->sensors[value - 1]);	\
-}
-
-#define sensor_attr(value)						\
-	__ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL)
-
-show_sensor(1);
-show_sensor(2);
-show_sensor(3);
-show_sensor(4);
-show_sensor(5);
-show_sensor(6);
-show_sensor(7);
-show_sensor(8);
-
-static struct device_attribute dev_sensor_attrs[] = {
-	sensor_attr(1), sensor_attr(2), sensor_attr(3), sensor_attr(4),
-	sensor_attr(5), sensor_attr(6), sensor_attr(7), sensor_attr(8)
-};
-
-static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct interfacekit *kit;
-	struct driver_interfacekit *ifkit;
-	int pipe, maxp, rc = -ENOMEM;
-	int bit, value, i;
-
-	ifkit = (struct driver_interfacekit *)id->driver_info;
-	if (!ifkit)
-		return -ENODEV;
-
-	interface = intf->cur_altsetting;
-	if (interface->desc.bNumEndpoints != 1)
-		return -ENODEV;
-
-	endpoint = &interface->endpoint[0].desc;
-	if (!usb_endpoint_dir_in(endpoint))
-		return -ENODEV;
-	/*
-	 * bmAttributes
-	 */
-	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-	
-	kit = kzalloc(sizeof(*kit), GFP_KERNEL);
-	if (!kit)
-		goto out;
-
-	kit->dev_no = -1;
-	kit->ifkit = ifkit;
-	kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &kit->data_dma);
-	if (!kit->data)
-		goto out;
-
-	kit->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!kit->irq)
-		goto out;
-
-	kit->udev = usb_get_dev(dev);
-	kit->intf = intf;
-	INIT_DELAYED_WORK(&kit->do_notify, do_notify);
-	INIT_DELAYED_WORK(&kit->do_resubmit, do_resubmit);
-	usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data,
-			maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
-			interfacekit_irq, kit, endpoint->bInterval);
-	kit->irq->transfer_dma = kit->data_dma;
-	kit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	usb_set_intfdata(intf, kit);
-
-        do {
-                bit = find_first_zero_bit(&device_no, sizeof(device_no));
-                value = test_and_set_bit(bit, &device_no);
-        } while(value);
-        kit->dev_no = bit;
-
-	kit->dev = device_create(phidget_class, &kit->udev->dev, MKDEV(0, 0),
-				 kit, "interfacekit%d", kit->dev_no);
-        if (IS_ERR(kit->dev)) {
-                rc = PTR_ERR(kit->dev);
-                kit->dev = NULL;
-                goto out;
-        }
-
-	if (usb_submit_urb(kit->irq, GFP_KERNEL)) {
-		rc = -EIO;
-		goto out;
-	}
-
-	for (i=0; i<ifkit->outputs; i++ ) {
-		rc = device_create_file(kit->dev, &dev_output_attrs[i]);
-		if (rc)
-			goto out2;
-	}
-
-	for (i=0; i<ifkit->inputs; i++ ) {
-		rc = device_create_file(kit->dev, &dev_input_attrs[i]);
-		if (rc)
-			goto out3;
-	}
-
-	for (i=0; i<ifkit->sensors; i++ ) {
-		rc = device_create_file(kit->dev, &dev_sensor_attrs[i]);
-		if (rc)
-			goto out4;
-	}
-
-	if (ifkit->has_lcd) {
-		rc = device_create_file(kit->dev, &dev_attr_lcd);
-		if (rc)
-			goto out4;
-
-	}
-
-	dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n",
-			ifkit->sensors, ifkit->inputs, ifkit->outputs);
-
-	return 0;
-
-out4:
-	while (i-- > 0)
-		device_remove_file(kit->dev, &dev_sensor_attrs[i]);
-
-	i = ifkit->inputs;
-out3:
-	while (i-- > 0)
-		device_remove_file(kit->dev, &dev_input_attrs[i]);
-
-	i = ifkit->outputs;
-out2:
-	while (i-- > 0)
-		device_remove_file(kit->dev, &dev_output_attrs[i]);
-out:
-	if (kit) {
-		usb_free_urb(kit->irq);
-		if (kit->data)
-			usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma);
-		if (kit->dev)
-			device_unregister(kit->dev);
-		if (kit->dev_no >= 0)
-			clear_bit(kit->dev_no, &device_no);
-
-		kfree(kit);
-	}
-
-	return rc;
-}
-
-static void interfacekit_disconnect(struct usb_interface *interface)
-{
-	struct interfacekit *kit;
-	int i;
-
-	kit = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-	if (!kit)
-		return;
-
-	usb_kill_urb(kit->irq);
-	usb_free_urb(kit->irq);
-	usb_buffer_free(kit->udev, URB_INT_SIZE, kit->data, kit->data_dma);
-
-	cancel_delayed_work(&kit->do_notify);
-	cancel_delayed_work(&kit->do_resubmit);
-
-	for (i=0; i<kit->ifkit->outputs; i++)
-		device_remove_file(kit->dev, &dev_output_attrs[i]);
-
-	for (i=0; i<kit->ifkit->inputs; i++)
-		device_remove_file(kit->dev, &dev_input_attrs[i]);
-
-	for (i=0; i<kit->ifkit->sensors; i++)
-		device_remove_file(kit->dev, &dev_sensor_attrs[i]);
-
-	if (kit->ifkit->has_lcd) {
-		device_remove_file(kit->dev, &dev_attr_lcd);
-		remove_lcd_files(kit);
-	}
-
-	device_unregister(kit->dev);
-
-	dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n",
-		kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs);
-
-	usb_put_dev(kit->udev);
-	clear_bit(kit->dev_no, &device_no);
-
-	kfree(kit);
-}
-
-static struct usb_driver interfacekit_driver = {
-	.name = "phidgetkit",
-	.probe = interfacekit_probe,
-	.disconnect = interfacekit_disconnect,
-	.id_table = id_table
-};
-
-static int __init interfacekit_init(void)
-{
-	int retval = 0;
-
-	retval = usb_register(&interfacekit_driver);
-	if (retval)
-		err("usb_register failed. Error number %d", retval);
-
-	return retval;
-}
-
-static void __exit interfacekit_exit(void)
-{
-	usb_deregister(&interfacekit_driver);
-}
-
-module_init(interfacekit_init);
-module_exit(interfacekit_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
deleted file mode 100644
index 38088b44349e..000000000000
--- a/drivers/usb/misc/phidgetmotorcontrol.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * USB Phidget MotorControl driver
- *
- * Copyright (C) 2006  Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-#include "phidget.h"
-
-#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
-#define DRIVER_DESC "USB PhidgetMotorControl Driver"
-
-#define USB_VENDOR_ID_GLAB		0x06c2
-#define USB_DEVICE_ID_MOTORCONTROL	0x0058
-
-#define URB_INT_SIZE			8
-
-static unsigned long device_no;
-
-struct motorcontrol {
-	struct usb_device *udev;
-	struct usb_interface *intf;
-	struct device *dev;
-	int dev_no;
-	u8 inputs[4];
-	s8 desired_speed[2];
-	s8 speed[2];
-	s16 _current[2];
-	s8 acceleration[2];
-	struct urb *irq;
-	unsigned char *data;
-	dma_addr_t data_dma;
-
-	struct delayed_work do_notify;
-	unsigned long input_events;
-	unsigned long speed_events;
-	unsigned long exceed_events;
-};
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_MOTORCONTROL) },
-	{}
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static int set_motor(struct motorcontrol *mc, int motor)
-{
-	u8 *buffer;
-	int speed, speed2, acceleration;
-	int retval;
-
-	buffer = kzalloc(8, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&mc->intf->dev, "%s - out of memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	acceleration = mc->acceleration[motor] * 10;
-	/* -127 <= speed <= 127 */
-	speed = (mc->desired_speed[motor] * 127) / 100;
-	/* -0x7300 <= speed2 <= 0x7300 */
-	speed2 = (mc->desired_speed[motor] * 230 * 128) / 100;
-
-	buffer[0] = motor;
-	buffer[1] = speed;
-	buffer[2] = acceleration >> 8;
-	buffer[3] = acceleration;
-	buffer[4] = speed2 >> 8;
-	buffer[5] = speed2;
-
-	retval = usb_control_msg(mc->udev,
-			 usb_sndctrlpipe(mc->udev, 0),
-			 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000);
-
-	if (retval != 8)
-		dev_err(&mc->intf->dev, "usb_control_msg returned %d\n",
-				retval);
-	kfree(buffer);
-
-	return retval < 0 ? retval : 0;
-}
-
-static void motorcontrol_irq(struct urb *urb)
-{
-	struct motorcontrol *mc = urb->context;
-	unsigned char *buffer = mc->data;
-	int i, level;
-	int retval;
-	int status = urb->status;;
-
-	switch (status) {
-	case 0:			/* success */
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	/* -EPIPE:  should clear the halt */
-	default:		/* error */
-		goto resubmit;
-	}
-
-	/* digital inputs */
-	for (i=0; i<4; i++) {
-		level = (buffer[0] >> i) & 1;
-		if (mc->inputs[i] != level) {
-			mc->inputs[i] = level;
-			set_bit(i, &mc->input_events);
-		}
-	}
-
-	/* motor speed */
-	if (buffer[2] == 0) {
-		for (i=0; i<2; i++) {
-		level = ((s8)buffer[4+i]) * 100 / 127;
-			if (mc->speed[i] != level) {
-				mc->speed[i] = level;
-				set_bit(i, &mc->speed_events);
-			}
-		}
-	} else {
-		int index = buffer[3] & 1;
-
-		level = ((s8)buffer[4] << 8) | buffer[5];
-		level = level * 100 / 29440;
-		if (mc->speed[index] != level) {
-			mc->speed[index] = level;
-			set_bit(index, &mc->speed_events);
-		}
-
-		level = ((s8)buffer[6] << 8) | buffer[7];
-		mc->_current[index] = level * 100 / 1572;
-	}
-
-	if (buffer[1] & 1)
-		set_bit(0, &mc->exceed_events);
-
-	if (buffer[1] & 2)
-		set_bit(1, &mc->exceed_events);
-
-	if (mc->input_events || mc->exceed_events || mc->speed_events)
-		schedule_delayed_work(&mc->do_notify, 0);
-
-resubmit:
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
-		dev_err(&mc->intf->dev,
-			"can't resubmit intr, %s-%s/motorcontrol0, retval %d\n",
-			mc->udev->bus->bus_name,
-			mc->udev->devpath, retval);
-}
-
-static void do_notify(struct work_struct *work)
-{
-	struct motorcontrol *mc =
-		container_of(work, struct motorcontrol, do_notify.work);
-	int i;
-	char sysfs_file[8];
-
-	for (i=0; i<4; i++) {
-		if (test_and_clear_bit(i, &mc->input_events)) {
-			sprintf(sysfs_file, "input%d", i);
-			sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
-		}
-	}
-
-	for (i=0; i<2; i++) {
-		if (test_and_clear_bit(i, &mc->speed_events)) {
-			sprintf(sysfs_file, "speed%d", i);
-			sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
-		}
-	}
-
-	for (i=0; i<2; i++) {
-		if (test_and_clear_bit(i, &mc->exceed_events))
-			dev_warn(&mc->intf->dev,
-				"motor #%d exceeds 1.5 Amp current limit\n", i);
-	}
-}
-
-#define show_set_speed(value)		\
-static ssize_t set_speed##value(struct device *dev,			\
-					struct device_attribute *attr,	\
-					const char *buf, size_t count)	\
-{									\
-	struct motorcontrol *mc = dev_get_drvdata(dev);			\
-	int speed;							\
-	int retval;							\
-									\
-	if (sscanf(buf, "%d", &speed) < 1)				\
-		return -EINVAL;						\
-									\
-	if (speed < -100 || speed > 100)				\
-		return -EINVAL;						\
-									\
-	mc->desired_speed[value] = speed;				\
-									\
-	retval = set_motor(mc, value);					\
-									\
-	return retval ? retval : count;					\
-}									\
-									\
-static ssize_t show_speed##value(struct device *dev,			\
-					struct device_attribute *attr,	\
-					char *buf)			\
-{									\
-	struct motorcontrol *mc = dev_get_drvdata(dev);			\
-									\
-	return sprintf(buf, "%d\n", mc->speed[value]);			\
-}
-
-#define speed_attr(value) 						\
-	__ATTR(speed##value, S_IWUGO | S_IRUGO, 			\
-		show_speed##value, set_speed##value)
-
-show_set_speed(0);
-show_set_speed(1);
-
-#define show_set_acceleration(value)		\
-static ssize_t set_acceleration##value(struct device *dev, 		\
-					struct device_attribute *attr,	\
-					const char *buf, size_t count)	\
-{									\
-	struct motorcontrol *mc = dev_get_drvdata(dev);			\
-	int acceleration;						\
-	int retval;							\
-									\
-	if (sscanf(buf, "%d", &acceleration) < 1)			\
-		return -EINVAL;						\
-									\
-	if (acceleration < 0 || acceleration > 100)			\
-		return -EINVAL;						\
-									\
-	mc->acceleration[value] = acceleration;				\
-									\
-	retval = set_motor(mc, value);					\
-									\
-	return retval ? retval : count;					\
-}									\
-									\
-static ssize_t show_acceleration##value(struct device *dev,	 	\
-					struct device_attribute *attr,	\
-							char *buf)	\
-{									\
-	struct motorcontrol *mc = dev_get_drvdata(dev);			\
-									\
-	return sprintf(buf, "%d\n", mc->acceleration[value]);		\
-}
-
-#define acceleration_attr(value)	\
-	__ATTR(acceleration##value, S_IWUGO | S_IRUGO,			\
-		show_acceleration##value, set_acceleration##value)
-
-show_set_acceleration(0);
-show_set_acceleration(1);
-
-#define show_current(value)	\
-static ssize_t show_current##value(struct device *dev,			\
-					struct device_attribute *attr,	\
-					char *buf)			\
-{									\
-	struct motorcontrol *mc = dev_get_drvdata(dev);			\
-									\
-	return sprintf(buf, "%dmA\n", (int)mc->_current[value]);	\
-}
-
-#define current_attr(value)	\
-	__ATTR(current##value, S_IRUGO, show_current##value, NULL)
-
-show_current(0);
-show_current(1);
-
-#define show_input(value)	\
-static ssize_t show_input##value(struct device *dev,			\
-					struct device_attribute *attr,	\
-					char *buf)			\
-{									\
-	struct motorcontrol *mc = dev_get_drvdata(dev);			\
-									\
-	return sprintf(buf, "%d\n", (int)mc->inputs[value]);		\
-}
-
-#define input_attr(value)	\
-	__ATTR(input##value, S_IRUGO, show_input##value, NULL)
-
-show_input(0);
-show_input(1);
-show_input(2);
-show_input(3);
-
-static struct device_attribute dev_attrs[] = {
-	input_attr(0),
-	input_attr(1),
-	input_attr(2),
-	input_attr(3),
-	speed_attr(0),
-	speed_attr(1),
-	acceleration_attr(0),
-	acceleration_attr(1),
-	current_attr(0),
-	current_attr(1)
-};
-
-static int motorcontrol_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct motorcontrol *mc;
-	int pipe, maxp, rc = -ENOMEM;
-	int bit, value, i;
-
-	interface = intf->cur_altsetting;
-	if (interface->desc.bNumEndpoints != 1)
-		return -ENODEV;
-
-	endpoint = &interface->endpoint[0].desc;
-	if (!usb_endpoint_dir_in(endpoint))
-		return -ENODEV;
-
-	/*
-	 * bmAttributes
-	 */
-	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
-	mc = kzalloc(sizeof(*mc), GFP_KERNEL);
-	if (!mc)
-		goto out;
-
-	mc->dev_no = -1;
-	mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &mc->data_dma);
-	if (!mc->data)
-		goto out;
-
-	mc->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!mc->irq)
-		goto out;
-
-	mc->udev = usb_get_dev(dev);
-	mc->intf = intf;
-	mc->acceleration[0] = mc->acceleration[1] = 10;
-	INIT_DELAYED_WORK(&mc->do_notify, do_notify);
-	usb_fill_int_urb(mc->irq, mc->udev, pipe, mc->data,
-			maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
-			motorcontrol_irq, mc, endpoint->bInterval);
-	mc->irq->transfer_dma = mc->data_dma;
-	mc->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	usb_set_intfdata(intf, mc);
-
-	do {
-		bit = find_first_zero_bit(&device_no, sizeof(device_no));
-		value = test_and_set_bit(bit, &device_no);
-	} while(value);
-	mc->dev_no = bit;
-
-	mc->dev = device_create(phidget_class, &mc->udev->dev, MKDEV(0, 0), mc,
-				"motorcontrol%d", mc->dev_no);
-	if (IS_ERR(mc->dev)) {
-		rc = PTR_ERR(mc->dev);
-		mc->dev = NULL;
-		goto out;
-	}
-
-	if (usb_submit_urb(mc->irq, GFP_KERNEL)) {
-		rc = -EIO;
-		goto out;
-	}
-
-	for (i=0; i<ARRAY_SIZE(dev_attrs); i++) {
-		rc = device_create_file(mc->dev, &dev_attrs[i]);
-		if (rc)
-			goto out2;
-	}
-
-	dev_info(&intf->dev, "USB PhidgetMotorControl attached\n");
-
-	return 0;
-out2:
-	while (i-- > 0)
-		device_remove_file(mc->dev, &dev_attrs[i]);
-out:
-	if (mc) {
-		usb_free_urb(mc->irq);
-		if (mc->data)
-			usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma);
-		if (mc->dev)
-			device_unregister(mc->dev);
-		if (mc->dev_no >= 0)
-			clear_bit(mc->dev_no, &device_no);
-
-		kfree(mc);
-	}
-
-	return rc;
-}
-
-static void motorcontrol_disconnect(struct usb_interface *interface)
-{
-	struct motorcontrol *mc;
-	int i;
-
-	mc = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-	if (!mc)
-		return;
-
-	usb_kill_urb(mc->irq);
-	usb_free_urb(mc->irq);
-	usb_buffer_free(mc->udev, URB_INT_SIZE, mc->data, mc->data_dma);
-
-	cancel_delayed_work(&mc->do_notify);
-
-	for (i=0; i<ARRAY_SIZE(dev_attrs); i++)
-		device_remove_file(mc->dev, &dev_attrs[i]);
-
-	device_unregister(mc->dev);
-
-	usb_put_dev(mc->udev);
-	clear_bit(mc->dev_no, &device_no);
-	kfree(mc);
-
-	dev_info(&interface->dev, "USB PhidgetMotorControl detached\n");
-}
-
-static struct usb_driver motorcontrol_driver = {
-	.name = "phidgetmotorcontrol",
-	.probe = motorcontrol_probe,
-	.disconnect = motorcontrol_disconnect,
-	.id_table = id_table
-};
-
-static int __init motorcontrol_init(void)
-{
-	int retval = 0;
-
-	retval = usb_register(&motorcontrol_driver);
-	if (retval)
-		err("usb_register failed. Error number %d", retval);
-
-	return retval;
-}
-
-static void __exit motorcontrol_exit(void)
-{
-	usb_deregister(&motorcontrol_driver);
-}
-
-module_init(motorcontrol_init);
-module_exit(motorcontrol_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
deleted file mode 100644
index bef6fe16364b..000000000000
--- a/drivers/usb/misc/phidgetservo.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * USB PhidgetServo driver 1.0
- *
- * Copyright (C) 2004, 2006 Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is a driver for the USB PhidgetServo version 2.0 and 3.0 servo 
- * controllers available at: http://www.phidgets.com/ 
- *
- * Note that the driver takes input as: degrees.minutes
- *
- * CAUTION: Generally you should use 0 < degrees < 180 as anything else
- * is probably beyond the range of your servo and may damage it.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-#include "phidget.h"
-
-#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
-#define DRIVER_DESC "USB PhidgetServo Driver"
-
-#define VENDOR_ID_GLAB				0x06c2
-#define DEVICE_ID_GLAB_PHIDGETSERVO_QUAD	0x0038
-#define DEVICE_ID_GLAB_PHIDGETSERVO_UNI		0x0039
-
-#define VENDOR_ID_WISEGROUP			0x0925
-#define VENDOR_ID_WISEGROUP_PHIDGETSERVO_QUAD	0x8101
-#define VENDOR_ID_WISEGROUP_PHIDGETSERVO_UNI	0x8104
-
-#define SERVO_VERSION_30			0x01
-#define SERVO_COUNT_QUAD			0x02
-
-static struct usb_device_id id_table[] = {
-	{
-		USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_GLAB_PHIDGETSERVO_QUAD), 
-		.driver_info = SERVO_VERSION_30 | SERVO_COUNT_QUAD 
-	},
-	{
-		USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_GLAB_PHIDGETSERVO_UNI),
-		.driver_info = SERVO_VERSION_30 
-	},
-	{
-		USB_DEVICE(VENDOR_ID_WISEGROUP, 
-				VENDOR_ID_WISEGROUP_PHIDGETSERVO_QUAD),
-		.driver_info = SERVO_COUNT_QUAD 
-	},
-	{
-		USB_DEVICE(VENDOR_ID_WISEGROUP, 
-				VENDOR_ID_WISEGROUP_PHIDGETSERVO_UNI),
-		.driver_info = 0
-	},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static int unsigned long device_no;
-
-struct phidget_servo {
-	struct usb_device *udev;
-	struct device *dev;
-	int dev_no;
-	ulong type;
-	int pulse[4];
-	int degrees[4];
-	int minutes[4];
-};
-
-static int
-change_position_v30(struct phidget_servo *servo, int servo_no, int degrees, 
-								int minutes)
-{
-	int retval;
-	unsigned char *buffer;
-
-	if (degrees < -23 || degrees > 362)
-		return -EINVAL;
-
-	buffer = kmalloc(6, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&servo->udev->dev, "%s - out of memory\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	/*
-	 * pulse = 0 - 4095
-	 * angle = 0 - 180 degrees
-	 *
-	 * pulse = angle * 10.6 + 243.8	
-	 */
-	servo->pulse[servo_no] = ((degrees*60 + minutes)*106 + 2438*60)/600;	
-	servo->degrees[servo_no]= degrees;
-	servo->minutes[servo_no]= minutes;	
-
-	/* 
-	 * The PhidgetServo v3.0 is controlled by sending 6 bytes,
-	 * 4 * 12 bits for each servo.
-	 *
-	 * low = lower 8 bits pulse
-	 * high = higher 4 bits pulse
-	 *
-	 * offset     bits
-	 * +---+-----------------+
-	 * | 0 |      low 0      |
-	 * +---+--------+--------+
-	 * | 1 | high 1 | high 0 |
-	 * +---+--------+--------+
-	 * | 2 |      low 1      |
-	 * +---+-----------------+
-	 * | 3 |      low 2      |
-	 * +---+--------+--------+
-	 * | 4 | high 3 | high 2 |
-	 * +---+--------+--------+
-	 * | 5 |      low 3      |
-	 * +---+-----------------+
-	 */
-
-	buffer[0] = servo->pulse[0] & 0xff;
-	buffer[1] = (servo->pulse[0] >> 8 & 0x0f)
-	    | (servo->pulse[1] >> 4 & 0xf0);
-	buffer[2] = servo->pulse[1] & 0xff;
-	buffer[3] = servo->pulse[2] & 0xff;
-	buffer[4] = (servo->pulse[2] >> 8 & 0x0f)
-	    | (servo->pulse[3] >> 4 & 0xf0);
-	buffer[5] = servo->pulse[3] & 0xff;
-
-	dev_dbg(&servo->udev->dev,
-		"data: %02x %02x %02x %02x %02x %02x\n",
-		buffer[0], buffer[1], buffer[2],
-		buffer[3], buffer[4], buffer[5]);
-
-	retval = usb_control_msg(servo->udev,
-				 usb_sndctrlpipe(servo->udev, 0),
-				 0x09, 0x21, 0x0200, 0x0000, buffer, 6, 2000);
-
-	kfree(buffer);
-
-	return retval;
-}
-
-static int
-change_position_v20(struct phidget_servo *servo, int servo_no, int degrees,
-								int minutes)
-{
-	int retval;
-	unsigned char *buffer;
-
-	if (degrees < -23 || degrees > 278)
-		return -EINVAL;
-
-	buffer = kmalloc(2, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&servo->udev->dev, "%s - out of memory\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	/*
-	 * angle = 0 - 180 degrees
-	 * pulse = angle + 23
-	 */
-	servo->pulse[servo_no]= degrees + 23;
-	servo->degrees[servo_no]= degrees;
-	servo->minutes[servo_no]= 0;
-
-	/*
-	 * The PhidgetServo v2.0 is controlled by sending two bytes. The
-	 * first byte is the servo number xor'ed with 2:
-	 *
-	 * servo 0 = 2
-	 * servo 1 = 3
-	 * servo 2 = 0
-	 * servo 3 = 1
-	 *
-	 * The second byte is the position.
-	 */
-
-	buffer[0] = servo_no ^ 2;
-	buffer[1] = servo->pulse[servo_no];
-
-	dev_dbg(&servo->udev->dev, "data: %02x %02x\n", buffer[0], buffer[1]);
-
-	retval = usb_control_msg(servo->udev,
-				 usb_sndctrlpipe(servo->udev, 0),
-				 0x09, 0x21, 0x0200, 0x0000, buffer, 2, 2000);
-
-	kfree(buffer);
-
-	return retval;
-}
-
-#define show_set(value)	\
-static ssize_t set_servo##value (struct device *dev, 			\
-					struct device_attribute *attr,	\
-					const char *buf, size_t count)	\
-{									\
-	int degrees, minutes, retval;					\
-	struct phidget_servo *servo = dev_get_drvdata(dev);		\
-									\
-	minutes = 0;							\
-	/* must at least convert degrees */				\
-	if (sscanf(buf, "%d.%d", &degrees, &minutes) < 1) {		\
-		return -EINVAL;						\
-	}								\
-									\
-	if (minutes < 0 || minutes > 59) 				\
-		return -EINVAL;						\
-									\
-	if (servo->type & SERVO_VERSION_30)				\
-		retval = change_position_v30(servo, value, degrees, 	\
-							minutes);	\
-	else 								\
-		retval = change_position_v20(servo, value, degrees, 	\
-							minutes);	\
-									\
-	return retval < 0 ? retval : count;				\
-}									\
-									\
-static ssize_t show_servo##value (struct device *dev,			\
-					struct device_attribute *attr,	\
-					char *buf) 			\
-{									\
-	struct phidget_servo *servo = dev_get_drvdata(dev);		\
-									\
-	return sprintf(buf, "%d.%02d\n", servo->degrees[value],		\
-				servo->minutes[value]);			\
-}
-
-#define servo_attr(value)						\
-	__ATTR(servo##value, S_IWUGO | S_IRUGO,				\
-		show_servo##value, set_servo##value)
-show_set(0);
-show_set(1);
-show_set(2);
-show_set(3);
-
-static struct device_attribute dev_attrs[] = {
-	servo_attr(0), servo_attr(1), servo_attr(2), servo_attr(3)
-};
-
-static int
-servo_probe(struct usb_interface *interface, const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct phidget_servo *dev;
-	int bit, value, rc;
-	int servo_count, i;
-
-	dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL);
-	if (dev == NULL) {
-		dev_err(&interface->dev, "%s - out of memory\n", __func__);
-		rc = -ENOMEM;
-		goto out;
-	}
-
-	dev->udev = usb_get_dev(udev);
-	dev->type = id->driver_info;
-	dev->dev_no = -1;
-	usb_set_intfdata(interface, dev);
-
-        do {
-                bit = find_first_zero_bit(&device_no, sizeof(device_no));
-                value = test_and_set_bit(bit, &device_no);
-        } while (value);
-	dev->dev_no = bit;
-
-	dev->dev = device_create(phidget_class, &dev->udev->dev, MKDEV(0, 0),
-				 dev, "servo%d", dev->dev_no);
-	if (IS_ERR(dev->dev)) {
-		rc = PTR_ERR(dev->dev);
-		dev->dev = NULL;
-		goto out;
-	}
-
-	servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
-
-	for (i=0; i<servo_count; i++) {
-		rc = device_create_file(dev->dev, &dev_attrs[i]);
-		if (rc)
-			goto out2;
-	}
-
-	dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n",
-		servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
-
-	if (!(dev->type & SERVO_VERSION_30))
-		dev_info(&interface->dev,
-			 "WARNING: v2.0 not tested! Please report if it works.\n");
-
-	return 0;
-out2:
-	while (i-- > 0)
-		device_remove_file(dev->dev, &dev_attrs[i]);
-out:
-	if (dev) {
-		if (dev->dev)
-			device_unregister(dev->dev);
-		if (dev->dev_no >= 0)
-			clear_bit(dev->dev_no, &device_no);
-
-		kfree(dev);
-	}
-
-	return rc;
-}
-
-static void
-servo_disconnect(struct usb_interface *interface)
-{
-	struct phidget_servo *dev;
-	int servo_count, i;
-
-	dev = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	if (!dev)
-		return;
-
-	servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
-
-	for (i=0; i<servo_count; i++)
-		device_remove_file(dev->dev, &dev_attrs[i]);
-
-	device_unregister(dev->dev);
-	usb_put_dev(dev->udev);
-
-	dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n",
-		servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
-
-	clear_bit(dev->dev_no, &device_no);
-	kfree(dev);
-}
-
-static struct usb_driver servo_driver = {
-	.name = "phidgetservo",
-	.probe = servo_probe,
-	.disconnect = servo_disconnect,
-	.id_table = id_table
-};
-
-static int __init
-phidget_servo_init(void)
-{
-	int retval;
-
-	retval = usb_register(&servo_driver);
-	if (retval)
-		err("usb_register failed. Error number %d", retval);
-
-	return retval;
-}
-
-static void __exit
-phidget_servo_exit(void)
-{
-	usb_deregister(&servo_driver);
-}
-
-module_init(phidget_servo_init);
-module_exit(phidget_servo_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 4cf27c72423e..f8d9045d668a 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -37,10 +37,13 @@
 #define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
 #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
 #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+/* #9 was MON_IOCT_SETAPI */
+#define MON_IOCX_GETX   _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get)
 
 #ifdef CONFIG_COMPAT
 #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
 #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
+#define MON_IOCX_GETX32   _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get32)
 #endif
 
 /*
@@ -92,7 +95,29 @@ struct mon_bin_hdr {
 	int status;
 	unsigned int len_urb;	/* Length of data (submitted or actual) */
 	unsigned int len_cap;	/* Delivered length */
-	unsigned char setup[SETUP_LEN];	/* Only for Control S-type */
+	union {
+		unsigned char setup[SETUP_LEN];	/* Only for Control S-type */
+		struct iso_rec {
+			int error_count;
+			int numdesc;
+		} iso;
+	} s;
+	int interval;
+	int start_frame;
+	unsigned int xfer_flags;
+	unsigned int ndesc;	/* Actual number of ISO descriptors */
+};
+
+/*
+ * ISO vector, packed into the head of data stream.
+ * This has to take 16 bytes to make sure that the end of buffer
+ * wrap is not happening in the middle of a descriptor.
+ */
+struct mon_bin_isodesc {
+	int          iso_status;
+	unsigned int iso_off;
+	unsigned int iso_len;
+	u32 _pad;
 };
 
 /* per file statistic */
@@ -102,7 +127,7 @@ struct mon_bin_stats {
 };
 
 struct mon_bin_get {
-	struct mon_bin_hdr __user *hdr;	/* Only 48 bytes, not 64. */
+	struct mon_bin_hdr __user *hdr;	/* Can be 48 bytes or 64. */
 	void __user *data;
 	size_t alloc;		/* Length of data (can be zero) */
 };
@@ -131,6 +156,11 @@ struct mon_bin_mfetch32 {
 #define PKT_ALIGN   64
 #define PKT_SIZE    64
 
+#define PKT_SZ_API0 48	/* API 0 (2.6.20) size */
+#define PKT_SZ_API1 64	/* API 1 size: extra fields */
+
+#define ISODESC_MAX   128	/* Same number as usbfs allows, 2048 bytes. */
+
 /* max number of USB bus supported */
 #define MON_BIN_MAX_MINOR 128
 
@@ -360,12 +390,8 @@ static inline char mon_bin_get_setup(unsigned char *setupb,
     const struct urb *urb, char ev_type)
 {
 
-	if (!usb_endpoint_xfer_control(&urb->ep->desc) || ev_type != 'S')
-		return '-';
-
 	if (urb->setup_packet == NULL)
 		return 'Z';
-
 	memcpy(setupb, urb->setup_packet, SETUP_LEN);
 	return 0;
 }
@@ -387,6 +413,26 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp,
 	return 0;
 }
 
+static void mon_bin_get_isodesc(const struct mon_reader_bin *rp,
+    unsigned int offset, struct urb *urb, char ev_type, unsigned int ndesc)
+{
+	struct mon_bin_isodesc *dp;
+	struct usb_iso_packet_descriptor *fp;
+
+	fp = urb->iso_frame_desc;
+	while (ndesc-- != 0) {
+		dp = (struct mon_bin_isodesc *)
+		    (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE);
+		dp->iso_status = fp->status;
+		dp->iso_off = fp->offset;
+		dp->iso_len = (ev_type == 'S') ? fp->length : fp->actual_length;
+		dp->_pad = 0;
+		if ((offset += sizeof(struct mon_bin_isodesc)) >= rp->b_size)
+			offset = 0;
+		fp++;
+	}
+}
+
 static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
     char ev_type, int status)
 {
@@ -396,6 +442,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 	unsigned int urb_length;
 	unsigned int offset;
 	unsigned int length;
+	unsigned int ndesc, lendesc;
 	unsigned char dir;
 	struct mon_bin_hdr *ep;
 	char data_tag = 0;
@@ -407,6 +454,19 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 	/*
 	 * Find the maximum allowable length, then allocate space.
 	 */
+	if (usb_endpoint_xfer_isoc(epd)) {
+		if (urb->number_of_packets < 0) {
+			ndesc = 0;
+		} else if (urb->number_of_packets >= ISODESC_MAX) {
+			ndesc = ISODESC_MAX;
+		} else {
+			ndesc = urb->number_of_packets;
+		}
+	} else {
+		ndesc = 0;
+	}
+	lendesc = ndesc*sizeof(struct mon_bin_isodesc);
+
 	urb_length = (ev_type == 'S') ?
 	    urb->transfer_buffer_length : urb->actual_length;
 	length = urb_length;
@@ -429,10 +489,12 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 		dir = 0;
 	}
 
-	if (rp->mmap_active)
-		offset = mon_buff_area_alloc_contiguous(rp, length + PKT_SIZE);
-	else
-		offset = mon_buff_area_alloc(rp, length + PKT_SIZE);
+	if (rp->mmap_active) {
+		offset = mon_buff_area_alloc_contiguous(rp,
+						 length + PKT_SIZE + lendesc);
+	} else {
+		offset = mon_buff_area_alloc(rp, length + PKT_SIZE + lendesc);
+	}
 	if (offset == ~0) {
 		rp->cnt_lost++;
 		spin_unlock_irqrestore(&rp->b_lock, flags);
@@ -456,9 +518,31 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 	ep->ts_usec = ts.tv_usec;
 	ep->status = status;
 	ep->len_urb = urb_length;
-	ep->len_cap = length;
+	ep->len_cap = length + lendesc;
+	ep->xfer_flags = urb->transfer_flags;
+
+	if (usb_endpoint_xfer_int(epd)) {
+		ep->interval = urb->interval;
+	} else if (usb_endpoint_xfer_isoc(epd)) {
+		ep->interval = urb->interval;
+		ep->start_frame = urb->start_frame;
+		ep->s.iso.error_count = urb->error_count;
+		ep->s.iso.numdesc = urb->number_of_packets;
+	}
+
+	if (usb_endpoint_xfer_control(epd) && ev_type == 'S') {
+		ep->flag_setup = mon_bin_get_setup(ep->s.setup, urb, ev_type);
+	} else {
+		ep->flag_setup = '-';
+	}
+
+	if (ndesc != 0) {
+		ep->ndesc = ndesc;
+		mon_bin_get_isodesc(rp, offset, urb, ev_type, ndesc);
+		if ((offset += lendesc) >= rp->b_size)
+			offset -= rp->b_size;
+	}
 
-	ep->flag_setup = mon_bin_get_setup(ep->setup, urb, ev_type);
 	if (length != 0) {
 		ep->flag_data = mon_bin_get_data(rp, offset, urb, length);
 		if (ep->flag_data != 0) {	/* Yes, it's 0x00, not '0' */
@@ -592,7 +676,8 @@ err_alloc:
  * Returns zero or error.
  */
 static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp,
-    struct mon_bin_hdr __user *hdr, void __user *data, unsigned int nbytes)
+    struct mon_bin_hdr __user *hdr, unsigned int hdrbytes,
+    void __user *data, unsigned int nbytes)
 {
 	unsigned long flags;
 	struct mon_bin_hdr *ep;
@@ -609,7 +694,7 @@ static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp,
 
 	ep = MON_OFF2HDR(rp, rp->b_out);
 
-	if (copy_to_user(hdr, ep, sizeof(struct mon_bin_hdr))) {
+	if (copy_to_user(hdr, ep, hdrbytes)) {
 		mutex_unlock(&rp->fetch_lock);
 		return -EFAULT;
 	}
@@ -657,6 +742,7 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
     size_t nbytes, loff_t *ppos)
 {
 	struct mon_reader_bin *rp = file->private_data;
+	unsigned int hdrbytes = PKT_SZ_API0;
 	unsigned long flags;
 	struct mon_bin_hdr *ep;
 	unsigned int offset;
@@ -674,8 +760,8 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
 
 	ep = MON_OFF2HDR(rp, rp->b_out);
 
-	if (rp->b_read < sizeof(struct mon_bin_hdr)) {
-		step_len = min(nbytes, sizeof(struct mon_bin_hdr) - rp->b_read);
+	if (rp->b_read < hdrbytes) {
+		step_len = min(nbytes, (size_t)(hdrbytes - rp->b_read));
 		ptr = ((char *)ep) + rp->b_read;
 		if (step_len && copy_to_user(buf, ptr, step_len)) {
 			mutex_unlock(&rp->fetch_lock);
@@ -687,13 +773,13 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
 		done += step_len;
 	}
 
-	if (rp->b_read >= sizeof(struct mon_bin_hdr)) {
+	if (rp->b_read >= hdrbytes) {
 		step_len = ep->len_cap;
-		step_len -= rp->b_read - sizeof(struct mon_bin_hdr);
+		step_len -= rp->b_read - hdrbytes;
 		if (step_len > nbytes)
 			step_len = nbytes;
 		offset = rp->b_out + PKT_SIZE;
-		offset += rp->b_read - sizeof(struct mon_bin_hdr);
+		offset += rp->b_read - hdrbytes;
 		if (offset >= rp->b_size)
 			offset -= rp->b_size;
 		if (copy_from_buf(rp, offset, buf, step_len)) {
@@ -709,7 +795,7 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
 	/*
 	 * Check if whole packet was read, and if so, jump to the next one.
 	 */
-	if (rp->b_read >= sizeof(struct mon_bin_hdr) + ep->len_cap) {
+	if (rp->b_read >= hdrbytes + ep->len_cap) {
 		spin_lock_irqsave(&rp->b_lock, flags);
 		mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
 		spin_unlock_irqrestore(&rp->b_lock, flags);
@@ -908,6 +994,7 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	case MON_IOCX_GET:
+	case MON_IOCX_GETX:
 		{
 		struct mon_bin_get getb;
 
@@ -917,8 +1004,9 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
 
 		if (getb.alloc > 0x10000000)	/* Want to cast to u32 */
 			return -EINVAL;
-		ret = mon_bin_get_event(file, rp,
-			  getb.hdr, getb.data, (unsigned int)getb.alloc);
+		ret = mon_bin_get_event(file, rp, getb.hdr,
+		    (cmd == MON_IOCX_GET)? PKT_SZ_API0: PKT_SZ_API1,
+		    getb.data, (unsigned int)getb.alloc);
 		}
 		break;
 
@@ -984,16 +1072,18 @@ static long mon_bin_compat_ioctl(struct file *file,
 
 	switch (cmd) {
 
-	case MON_IOCX_GET32: {
+	case MON_IOCX_GET32:
+	case MON_IOCX_GETX32:
+		{
 		struct mon_bin_get32 getb;
 
 		if (copy_from_user(&getb, (void __user *)arg,
 					    sizeof(struct mon_bin_get32)))
 			return -EFAULT;
 
-		ret = mon_bin_get_event(file, rp,
-		    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
-		    getb.alloc32);
+		ret = mon_bin_get_event(file, rp, compat_ptr(getb.hdr32),
+		    (cmd == MON_IOCX_GET32)? PKT_SZ_API0: PKT_SZ_API1,
+		    compat_ptr(getb.data32), getb.alloc32);
 		if (ret < 0)
 			return ret;
 		}
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 9985db08e7db..b66e8544d8b9 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -20,8 +20,8 @@ config USB_MUSB_HDRC
 	  it's being used with, including the USB peripheral role,
 	  or the USB host role, or both.
 
-	  Texas Instruments parts using this IP include DaVinci 644x,
-	  OMAP 243x, OMAP 343x, and TUSB 6010.
+	  Texas Instruments familiies using this IP include DaVinci
+	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 
 	  Analog Devices parts using this IP include Blackfin BF54x,
 	  BF525 and BF527.
@@ -40,7 +40,7 @@ config USB_MUSB_SOC
 	default y if (BF54x && !BF544)
 	default y if (BF52x && !BF522 && !BF523)
 
-comment "DaVinci 644x USB support"
+comment "DaVinci 35x and 644x USB support"
 	depends on USB_MUSB_HDRC && ARCH_DAVINCI
 
 comment "OMAP 243x high speed USB support"
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 2dc7606f319c..10d11ab113ab 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -48,6 +48,9 @@
 #include "cppi_dma.h"
 
 
+#define USB_PHY_CTRL	IO_ADDRESS(USBPHY_CTL_PADDR)
+#define DM355_DEEPSLEEP	IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
+
 /* REVISIT (PM) we should be able to keep the PHY in low power mode most
  * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
  * and, when in host mode, autosuspending idle root ports... PHYPLLON
@@ -56,20 +59,26 @@
 
 static inline void phy_on(void)
 {
-	/* start the on-chip PHY and its PLL */
-	__raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
-			(void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
-	while ((__raw_readl((void __force __iomem *)
-				IO_ADDRESS(USBPHY_CTL_PADDR))
-			& USBPHY_PHYCLKGD) == 0)
+	u32	phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+	/* power everything up; start the on-chip PHY and its PLL */
+	phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN);
+	phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON;
+	__raw_writel(phy_ctrl, USB_PHY_CTRL);
+
+	/* wait for PLL to lock before proceeding */
+	while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0)
 		cpu_relax();
 }
 
 static inline void phy_off(void)
 {
-	/* powerdown the on-chip PHY and its oscillator */
-	__raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
-			IO_ADDRESS(USBPHY_CTL_PADDR));
+	u32	phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+	/* powerdown the on-chip PHY, its PLL, and the OTG block */
+	phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON);
+	phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN;
+	__raw_writel(phy_ctrl, USB_PHY_CTRL);
 }
 
 static int dma_off = 1;
@@ -126,10 +135,6 @@ void musb_platform_disable(struct musb *musb)
 }
 
 
-/* REVISIT it's not clear whether DaVinci can support full OTG.  */
-
-static int vbus_state = -1;
-
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 #define	portstate(stmt)		stmt
 #else
@@ -137,10 +142,19 @@ static int vbus_state = -1;
 #endif
 
 
-/* VBUS SWITCHING IS BOARD-SPECIFIC */
+/*
+ * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM,
+ * which doesn't wire DRVVBUS to the FET that switches it.  Unclear
+ * if that's a problem with the DM6446 chip or just with that board.
+ *
+ * In either case, the DM355 EVM automates DRVVBUS the normal way,
+ * when J10 is out, and TI documents it as handling OTG.
+ */
 
 #ifdef CONFIG_MACH_DAVINCI_EVM
 
+static int vbus_state = -1;
+
 /* I2C operations are always synchronous, and require a task context.
  * With unloaded systems, using the shared workqueue seems to suffice
  * to satisfy the 100msec A_WAIT_VRISE timeout...
@@ -150,12 +164,12 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
 	gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
 	vbus_state = !vbus_state;
 }
-static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
 
 #endif	/* EVM */
 
 static void davinci_source_power(struct musb *musb, int is_on, int immediate)
 {
+#ifdef CONFIG_MACH_DAVINCI_EVM
 	if (is_on)
 		is_on = 1;
 
@@ -163,16 +177,17 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
 		return;
 	vbus_state = !is_on;		/* 0/1 vs "-1 == unknown/init" */
 
-#ifdef CONFIG_MACH_DAVINCI_EVM
 	if (machine_is_davinci_evm()) {
+		static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
 		if (immediate)
 			gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
 		else
 			schedule_work(&evm_vbus_work);
 	}
-#endif
 	if (immediate)
 		vbus_state = is_on;
+#endif
 }
 
 static void davinci_set_vbus(struct musb *musb, int is_on)
@@ -391,6 +406,17 @@ int __init musb_platform_init(struct musb *musb)
 	musb->board_set_vbus = davinci_set_vbus;
 	davinci_source_power(musb, 0, 1);
 
+	/* dm355 EVM swaps D+/D- for signal integrity, and
+	 * is clocked from the main 24 MHz crystal.
+	 */
+	if (machine_is_davinci_dm355_evm()) {
+		u32	phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+		phy_ctrl &= ~(3 << 9);
+		phy_ctrl |= USBPHY_DATAPOL;
+		__raw_writel(phy_ctrl, USB_PHY_CTRL);
+	}
+
 	/* reset the controller */
 	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
 
@@ -401,8 +427,7 @@ int __init musb_platform_init(struct musb *musb)
 
 	/* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
 	pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
-		revision, __raw_readl((void __force __iomem *)
-				IO_ADDRESS(USBPHY_CTL_PADDR)),
+		revision, __raw_readl(USB_PHY_CTRL),
 		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
 
 	musb->isr = davinci_interrupt;
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 7fb6238e270f..046c84433cad 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -15,14 +15,21 @@
  */
 
 /* Integrated highspeed/otg PHY */
-#define	USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
-#define	USBPHY_PHYCLKGD		(1 << 8)
-#define	USBPHY_SESNDEN		(1 << 7)	/* v(sess_end) comparator */
-#define	USBPHY_VBDTCTEN		(1 << 6)	/* v(bus) comparator */
-#define	USBPHY_PHYPLLON		(1 << 4)	/* override pll suspend */
-#define	USBPHY_CLKO1SEL		(1 << 3)
-#define	USBPHY_OSCPDWN		(1 << 2)
-#define	USBPHY_PHYPDWN		(1 << 0)
+#define USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_DATAPOL		BIT(11)	/* (dm355) switch D+/D- */
+#define USBPHY_PHYCLKGD		BIT(8)
+#define USBPHY_SESNDEN		BIT(7)	/* v(sess_end) comparator */
+#define USBPHY_VBDTCTEN		BIT(6)	/* v(bus) comparator */
+#define USBPHY_VBUSSENS		BIT(5)	/* (dm355,ro) is vbus > 0.5V */
+#define USBPHY_PHYPLLON		BIT(4)	/* override pll suspend */
+#define USBPHY_CLKO1SEL		BIT(3)
+#define USBPHY_OSCPDWN		BIT(2)
+#define USBPHY_OTGPDWN		BIT(1)
+#define USBPHY_PHYPDWN		BIT(0)
+
+#define DM355_DEEPSLEEP_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DRVVBUS_FORCE		BIT(2)
+#define DRVVBUS_OVERRIDE	BIT(1)
 
 /* For now include usb OTG module registers here */
 #define DAVINCI_USB_VERSION_REG		0x00
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index af77e4659006..338cd1611ab3 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -769,7 +769,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 		case OTG_STATE_A_SUSPEND:
 			usb_hcd_resume_root_hub(musb_to_hcd(musb));
 			musb_root_disconnect(musb);
-			if (musb->a_wait_bcon != 0)
+			if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
 				musb_platform_try_idle(musb, jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon));
 			break;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 630946a2d9fc..efb39b5e55b5 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -331,7 +331,6 @@ struct musb {
 	struct list_head	control;	/* of musb_qh */
 	struct list_head	in_bulk;	/* of musb_qh */
 	struct list_head	out_bulk;	/* of musb_qh */
-	struct musb_qh		*periodic[32];	/* tree of interrupt+iso */
 #endif
 
 	/* called with IRQs blocked; ON/nonzero implies starting a session,
@@ -479,10 +478,11 @@ static inline void musb_configure_ep0(struct musb *musb)
 static inline int musb_read_fifosize(struct musb *musb,
 		struct musb_hw_ep *hw_ep, u8 epnum)
 {
+	void *mbase = musb->mregs;
 	u8 reg = 0;
 
 	/* read from core using indexed model */
-	reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+	reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
 	/* 0's returned when no more endpoints */
 	if (!reg)
 		return -ENODEV;
@@ -509,6 +509,7 @@ static inline void musb_configure_ep0(struct musb *musb)
 {
 	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
 	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].is_shared_fifo = true;
 }
 #endif /* CONFIG_BLACKFIN */
 
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 6dbbd0786a6a..499c431a6d62 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -64,11 +64,8 @@
  *
  * - DMA (Mentor/OMAP) ...has at least toggle update problems
  *
- * - Still no traffic scheduling code to make NAKing for bulk or control
- *   transfers unable to starve other requests; or to make efficient use
- *   of hardware with periodic transfers.  (Note that network drivers
- *   commonly post bulk reads that stay pending for a long time; these
- *   would make very visible trouble.)
+ * - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet
+ *   starvation ... nothing yet for TX, interrupt, or bulk.
  *
  * - Not tested with HNP, but some SRP paths seem to behave.
  *
@@ -88,11 +85,8 @@
  *
  * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
  * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
- *
  * (Yes, bulk _could_ use more of the endpoints than that, and would even
- * benefit from it ... one remote device may easily be NAKing while others
- * need to perform transfers in that same direction.  The same thing could
- * be done in software though, assuming dma cooperates.)
+ * benefit from it.)
  *
  * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
  * So far that scheduling is both dumb and optimistic:  the endpoint will be
@@ -201,8 +195,9 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 		len = urb->iso_frame_desc[0].length;
 		break;
 	default:		/* bulk, interrupt */
-		buf = urb->transfer_buffer;
-		len = urb->transfer_buffer_length;
+		/* actual_length may be nonzero on retry paths */
+		buf = urb->transfer_buffer + urb->actual_length;
+		len = urb->transfer_buffer_length - urb->actual_length;
 	}
 
 	DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
@@ -395,7 +390,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 			 * de-allocated if it's tracked and allocated;
 			 * and where we'd update the schedule tree...
 			 */
-			musb->periodic[ep->epnum] = NULL;
 			kfree(qh);
 			qh = NULL;
 			break;
@@ -1045,7 +1039,8 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 
 		/* NOTE:  this code path would be a good place to PAUSE a
 		 * control transfer, if another one is queued, so that
-		 * ep0 is more likely to stay busy.
+		 * ep0 is more likely to stay busy.  That's already done
+		 * for bulk RX transfers.
 		 *
 		 * if (qh->ring.next != &musb->control), then
 		 * we have a candidate... NAKing is *NOT* an error
@@ -1197,6 +1192,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		/* NOTE:  this code path would be a good place to PAUSE a
 		 * transfer, if there's some other (nonperiodic) tx urb
 		 * that could use this fifo.  (dma complicates it...)
+		 * That's already done for bulk RX transfers.
 		 *
 		 * if (bulk && qh->ring.next != &musb->out_bulk), then
 		 * we have a candidate... NAKing is *NOT* an error
@@ -1358,6 +1354,50 @@ finish:
 
 #endif
 
+/* Schedule next QH from musb->in_bulk and move the current qh to
+ * the end; avoids starvation for other endpoints.
+ */
+static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
+{
+	struct dma_channel	*dma;
+	struct urb		*urb;
+	void __iomem		*mbase = musb->mregs;
+	void __iomem		*epio = ep->regs;
+	struct musb_qh		*cur_qh, *next_qh;
+	u16			rx_csr;
+
+	musb_ep_select(mbase, ep->epnum);
+	dma = is_dma_capable() ? ep->rx_channel : NULL;
+
+	/* clear nak timeout bit */
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+	rx_csr &= ~MUSB_RXCSR_DATAERROR;
+	musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+	cur_qh = first_qh(&musb->in_bulk);
+	if (cur_qh) {
+		urb = next_urb(cur_qh);
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			musb->dma_controller->channel_abort(dma);
+			urb->actual_length += dma->actual_len;
+			dma->actual_len = 0L;
+		}
+		musb_save_toggle(ep, 1, urb);
+
+		/* move cur_qh to end of queue */
+		list_move_tail(&cur_qh->ring, &musb->in_bulk);
+
+		/* get the next qh from musb->in_bulk */
+		next_qh = first_qh(&musb->in_bulk);
+
+		/* set rx_reinit and schedule the next qh */
+		ep->rx_reinit = 1;
+		musb_start_urb(musb, 1, next_qh);
+	}
+}
+
 /*
  * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
  * and high-bandwidth IN transfer cases.
@@ -1421,18 +1461,26 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
 
 		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
-			/* NOTE this code path would be a good place to PAUSE a
-			 * transfer, if there's some other (nonperiodic) rx urb
-			 * that could use this fifo.  (dma complicates it...)
+			DBG(6, "RX end %d NAK timeout\n", epnum);
+
+			/* NOTE: NAKing is *NOT* an error, so we want to
+			 * continue.  Except ... if there's a request for
+			 * another QH, use that instead of starving it.
 			 *
-			 * if (bulk && qh->ring.next != &musb->in_bulk), then
-			 * we have a candidate... NAKing is *NOT* an error
+			 * Devices like Ethernet and serial adapters keep
+			 * reads posted at all times, which will starve
+			 * other devices without this logic.
 			 */
-			DBG(6, "RX end %d NAK timeout\n", epnum);
+			if (usb_pipebulk(urb->pipe)
+					&& qh->mux == 1
+					&& !list_is_singular(&musb->in_bulk)) {
+				musb_bulk_rx_nak_timeout(musb, hw_ep);
+				return;
+			}
 			musb_ep_select(mbase, epnum);
-			musb_writew(epio, MUSB_RXCSR,
-					MUSB_RXCSR_H_WZC_BITS
-					| MUSB_RXCSR_H_REQPKT);
+			rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+			rx_csr &= ~MUSB_RXCSR_DATAERROR;
+			musb_writew(epio, MUSB_RXCSR, rx_csr);
 
 			goto finish;
 		} else {
@@ -1711,31 +1759,27 @@ static int musb_schedule(
 
 	/* else, periodic transfers get muxed to other endpoints */
 
-	/* FIXME this doesn't consider direction, so it can only
-	 * work for one half of the endpoint hardware, and assumes
-	 * the previous cases handled all non-shared endpoints...
-	 */
-
-	/* we know this qh hasn't been scheduled, so all we need to do
+	/*
+	 * We know this qh hasn't been scheduled, so all we need to do
 	 * is choose which hardware endpoint to put it on ...
 	 *
 	 * REVISIT what we really want here is a regular schedule tree
-	 * like e.g. OHCI uses, but for now musb->periodic is just an
-	 * array of the _single_ logical endpoint associated with a
-	 * given physical one (identity mapping logical->physical).
-	 *
-	 * that simplistic approach makes TT scheduling a lot simpler;
-	 * there is none, and thus none of its complexity...
+	 * like e.g. OHCI uses.
 	 */
 	best_diff = 4096;
 	best_end = -1;
 
-	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+	for (epnum = 1, hw_ep = musb->endpoints + 1;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
 		int	diff;
 
-		if (musb->periodic[epnum])
+		if (is_in || hw_ep->is_shared_fifo) {
+			if (hw_ep->in_qh  != NULL)
+				continue;
+		} else	if (hw_ep->out_qh != NULL)
 			continue;
-		hw_ep = &musb->endpoints[epnum];
+
 		if (hw_ep == musb->bulk_ep)
 			continue;
 
@@ -1756,6 +1800,17 @@ static int musb_schedule(
 			head = &musb->in_bulk;
 		else
 			head = &musb->out_bulk;
+
+		/* Enable bulk RX NAK timeout scheme when bulk requests are
+		 * multiplexed.  This scheme doen't work in high speed to full
+		 * speed scenario as NAK interrupts are not coming from a
+		 * full speed device connected to a high speed device.
+		 * NAK timeout interval is 8 (128 uframe or 16ms) for HS and
+		 * 4 (8 frame or 8ms) for FS device.
+		 */
+		if (is_in && qh->dev)
+			qh->intv_reg =
+				(USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4;
 		goto success;
 	} else if (best_end < 0) {
 		return -ENOSPC;
@@ -1764,7 +1819,6 @@ static int musb_schedule(
 	idle = 1;
 	qh->mux = 0;
 	hw_ep = musb->endpoints + best_end;
-	musb->periodic[best_end] = qh;
 	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
 success:
 	if (head) {
@@ -1888,13 +1942,11 @@ static int musb_urb_enqueue(
 		 *
 		 * The downside of disabling this is that transfer scheduling
 		 * gets VERY unfair for nonperiodic transfers; a misbehaving
-		 * peripheral could make that hurt.  Or for reads, one that's
-		 * perfectly normal:  network and other drivers keep reads
-		 * posted at all times, having one pending for a week should
-		 * be perfectly safe.
+		 * peripheral could make that hurt.  That's perfectly normal
+		 * for reads from network or serial adapters ... so we have
+		 * partial NAKlimit support for bulk RX.
 		 *
-		 * The upside of disabling it is avoidng transfer scheduling
-		 * code to put this aside for while.
+		 * The upside of disabling it is simpler transfer scheduling.
 		 */
 		interval = 0;
 	}
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index e0e9ce584175..bf677acc83db 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -285,7 +285,7 @@ int musb_hub_control(
 		desc->bDescLength = 9;
 		desc->bDescriptorType = 0x29;
 		desc->bNbrPorts = 1;
-		desc->wHubCharacteristics = __constant_cpu_to_le16(
+		desc->wHubCharacteristics = cpu_to_le16(
 				  0x0001	/* per-port power switching */
 				| 0x0010	/* no overcurrent reporting */
 				);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index ee55b449ffde..aa884d072f0b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -43,7 +43,7 @@ config ISP1301_OMAP
 
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE
+	depends on TWL4030_CORE && REGULATOR_TWL4030
 	select USB_OTG_UTILS
 	help
 	  Enable this to support the USB OTG transceiver on TWL4030
@@ -51,4 +51,12 @@ config TWL4030_USB
 	  This transceiver supports high and full speed devices plus,
 	  in host mode, low speed.
 
+config NOP_USB_XCEIV
+	tristate "NOP USB Transceiver Driver"
+	select USB_OTG_UTILS
+	help
+	 this driver is to be used by all the usb transceiver which are either
+	 built-in with usb ip or which are autonomous and doesn't require any
+	 phy programming such as ISP1x04 etc.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index d73c7cf5e2f7..208167856529 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
+obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 
 ccflags-$(CONFIG_USB_DEBUG)	+= -DDEBUG
 ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 63a6036f04be..1c26c94513e9 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -13,6 +13,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/workqueue.h>
 
 #include <linux/regulator/consumer.h>
 
@@ -34,6 +35,7 @@ struct gpio_vbus_data {
 	struct regulator       *vbus_draw;
 	int			vbus_draw_enabled;
 	unsigned		mA;
+	struct work_struct	work;
 };
 
 
@@ -76,24 +78,26 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
 	gpio_vbus->mA = mA;
 }
 
-/* VBUS change IRQ handler */
-static irqreturn_t gpio_vbus_irq(int irq, void *data)
+static int is_vbus_powered(struct gpio_vbus_mach_info *pdata)
 {
-	struct platform_device *pdev = data;
-	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
-	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
-	int gpio, vbus;
+	int vbus;
 
 	vbus = gpio_get_value(pdata->gpio_vbus);
 	if (pdata->gpio_vbus_inverted)
 		vbus = !vbus;
 
-	dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
-		vbus ? "supplied" : "inactive",
-		gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+	return vbus;
+}
+
+static void gpio_vbus_work(struct work_struct *work)
+{
+	struct gpio_vbus_data *gpio_vbus =
+		container_of(work, struct gpio_vbus_data, work);
+	struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
+	int gpio;
 
 	if (!gpio_vbus->otg.gadget)
-		return IRQ_HANDLED;
+		return;
 
 	/* Peripheral controllers which manage the pullup themselves won't have
 	 * gpio_pullup configured here.  If it's configured here, we'll do what
@@ -101,7 +105,7 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 	 * that may complicate usb_gadget_{,dis}connect() support.
 	 */
 	gpio = pdata->gpio_pullup;
-	if (vbus) {
+	if (is_vbus_powered(pdata)) {
 		gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL;
 		usb_gadget_vbus_connect(gpio_vbus->otg.gadget);
 
@@ -121,6 +125,21 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 		usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget);
 		gpio_vbus->otg.state = OTG_STATE_B_IDLE;
 	}
+}
+
+/* VBUS change IRQ handler */
+static irqreturn_t gpio_vbus_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
+	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+
+	dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
+		is_vbus_powered(pdata) ? "supplied" : "inactive",
+		gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+
+	if (gpio_vbus->otg.gadget)
+		schedule_work(&gpio_vbus->work);
 
 	return IRQ_HANDLED;
 }
@@ -257,6 +276,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 			irq, err);
 		goto err_irq;
 	}
+	INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
 
 	/* only active when a gadget is registered */
 	err = otg_set_transceiver(&gpio_vbus->otg);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
new file mode 100644
index 000000000000..4b933f646f2e
--- /dev/null
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -0,0 +1,180 @@
+/*
+ * drivers/usb/otg/nop-usb-xceiv.c
+ *
+ * NOP USB transceiver for all USB transceiver which are either built-in
+ * into USB IP or which are mostly autonomous.
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Current status:
+ * 	this is to add "nop" transceiver for all those phy which is
+ * 	autonomous such as isp1504 etc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+
+struct nop_usb_xceiv {
+	struct otg_transceiver	otg;
+	struct device		*dev;
+};
+
+static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device nop_xceiv_device = {
+	.name           = "nop_usb_xceiv",
+	.id             = -1,
+	.dev = {
+		.dma_mask               = &nop_xceiv_dmamask,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.platform_data          = NULL,
+	},
+};
+
+void usb_nop_xceiv_register(void)
+{
+	if (platform_device_register(&nop_xceiv_device) < 0) {
+		printk(KERN_ERR "Unable to register usb nop transceiver\n");
+		return;
+	}
+}
+
+void usb_nop_xceiv_unregister(void)
+{
+	platform_device_unregister(&nop_xceiv_device);
+}
+
+static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x)
+{
+	return container_of(x, struct nop_usb_xceiv, otg);
+}
+
+static int nop_set_suspend(struct otg_transceiver *x, int suspend)
+{
+	return 0;
+}
+
+static int nop_set_peripheral(struct otg_transceiver *x,
+		struct usb_gadget *gadget)
+{
+	struct nop_usb_xceiv *nop;
+
+	if (!x)
+		return -ENODEV;
+
+	nop = xceiv_to_nop(x);
+
+	if (!gadget) {
+		nop->otg.gadget = NULL;
+		return -ENODEV;
+	}
+
+	nop->otg.gadget = gadget;
+	nop->otg.state = OTG_STATE_B_IDLE;
+	return 0;
+}
+
+static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host)
+{
+	struct nop_usb_xceiv *nop;
+
+	if (!x)
+		return -ENODEV;
+
+	nop = xceiv_to_nop(x);
+
+	if (!host) {
+		nop->otg.host = NULL;
+		return -ENODEV;
+	}
+
+	nop->otg.host = host;
+	return 0;
+}
+
+static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
+{
+	struct nop_usb_xceiv	*nop;
+	int err;
+
+	nop = kzalloc(sizeof *nop, GFP_KERNEL);
+	if (!nop)
+		return -ENOMEM;
+
+	nop->dev		= &pdev->dev;
+	nop->otg.dev		= nop->dev;
+	nop->otg.label		= "nop-xceiv";
+	nop->otg.state		= OTG_STATE_UNDEFINED;
+	nop->otg.set_host	= nop_set_host;
+	nop->otg.set_peripheral	= nop_set_peripheral;
+	nop->otg.set_suspend	= nop_set_suspend;
+
+	err = otg_set_transceiver(&nop->otg);
+	if (err) {
+		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+			err);
+		goto exit;
+	}
+
+	platform_set_drvdata(pdev, nop);
+
+	return 0;
+exit:
+	kfree(nop);
+	return err;
+}
+
+static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
+{
+	struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
+
+	otg_set_transceiver(NULL);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(nop);
+
+	return 0;
+}
+
+static struct platform_driver nop_usb_xceiv_driver = {
+	.probe		= nop_usb_xceiv_probe,
+	.remove		= __devexit_p(nop_usb_xceiv_remove),
+	.driver		= {
+		.name	= "nop_usb_xceiv",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init nop_usb_xceiv_init(void)
+{
+	return platform_driver_register(&nop_usb_xceiv_driver);
+}
+subsys_initcall(nop_usb_xceiv_init);
+
+static void __exit nop_usb_xceiv_exit(void)
+{
+	platform_driver_unregister(&nop_usb_xceiv_driver);
+}
+module_exit(nop_usb_xceiv_exit);
+
+MODULE_ALIAS("platform:nop_usb_xceiv");
+MODULE_AUTHOR("Texas Instruments Inc");
+MODULE_DESCRIPTION("NOP USB Transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 416e4410be02..d9478d0e1c8b 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -34,6 +34,8 @@
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
 
 
 /* Register defines */
@@ -246,6 +248,11 @@ struct twl4030_usb {
 	struct otg_transceiver	otg;
 	struct device		*dev;
 
+	/* TWL4030 internal USB regulator supplies */
+	struct regulator	*usb1v5;
+	struct regulator	*usb1v8;
+	struct regulator	*usb3v1;
+
 	/* for vbus reporting with irqs disabled */
 	spinlock_t		lock;
 
@@ -434,6 +441,18 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 
 	pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
 	if (on) {
+		regulator_enable(twl->usb3v1);
+		regulator_enable(twl->usb1v8);
+		/*
+		 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
+		 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
+		 * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
+		 * SLEEP. We work around this by clearing the bit after usv3v1
+		 * is re-activated. This ensures that VUSB3V1 is really active.
+		 */
+		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
+							VUSB_DEDICATED2);
+		regulator_enable(twl->usb1v5);
 		pwr &= ~PHY_PWR_PHYPWD;
 		WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
 		twl4030_usb_write(twl, PHY_CLK_CTRL,
@@ -443,6 +462,9 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 	} else  {
 		pwr |= PHY_PWR_PHYPWD;
 		WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+		regulator_disable(twl->usb1v5);
+		regulator_disable(twl->usb1v8);
+		regulator_disable(twl->usb3v1);
 	}
 }
 
@@ -468,7 +490,7 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
 	twl->asleep = 0;
 }
 
-static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
+static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 {
 	/* Enable writing to power configuration registers */
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
@@ -480,20 +502,45 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
 	/* input to VUSB3V1 LDO is from VBAT, not VBUS */
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 
-	/* turn on 3.1V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB3V1_DEV_GRP);
+	/* Initialize 3.1V regulator */
+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+
+	twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
+	if (IS_ERR(twl->usb3v1))
+		return -ENODEV;
+
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 
-	/* turn on 1.5V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V5_DEV_GRP);
+	/* Initialize 1.5V regulator */
+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+
+	twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
+	if (IS_ERR(twl->usb1v5))
+		goto fail1;
+
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
-	/* turn on 1.8V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V8_DEV_GRP);
+	/* Initialize 1.8V regulator */
+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+
+	twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
+	if (IS_ERR(twl->usb1v8))
+		goto fail2;
+
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
 	/* disable access to power configuration registers */
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
+
+	return 0;
+
+fail2:
+	regulator_put(twl->usb1v5);
+	twl->usb1v5 = NULL;
+fail1:
+	regulator_put(twl->usb3v1);
+	twl->usb3v1 = NULL;
+	return -ENODEV;
 }
 
 static ssize_t twl4030_usb_vbus_show(struct device *dev,
@@ -598,7 +645,7 @@ static int __init twl4030_usb_probe(struct platform_device *pdev)
 {
 	struct twl4030_usb_data *pdata = pdev->dev.platform_data;
 	struct twl4030_usb	*twl;
-	int			status;
+	int			status, err;
 
 	if (!pdata) {
 		dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -622,7 +669,12 @@ static int __init twl4030_usb_probe(struct platform_device *pdev)
 	/* init spinlock for workqueue */
 	spin_lock_init(&twl->lock);
 
-	twl4030_usb_ldo_init(twl);
+	err = twl4030_usb_ldo_init(twl);
+	if (err) {
+		dev_err(&pdev->dev, "ldo init failed\n");
+		kfree(twl);
+		return err;
+	}
 	otg_set_transceiver(&twl->otg);
 
 	platform_set_drvdata(pdev, twl);
@@ -688,6 +740,9 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
 	twl4030_phy_power(twl, 0);
+	regulator_put(twl->usb1v5);
+	regulator_put(twl->usb1v8);
+	regulator_put(twl->usb3v1);
 
 	kfree(twl);
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index b361f05cafac..a65f9196b0a0 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -116,14 +116,14 @@ config USB_SERIAL_DIGI_ACCELEPORT
 	  To compile this driver as a module, choose M here: the
 	  module will be called digi_acceleport.
 
-config USB_SERIAL_CP2101
-	tristate "USB CP2101 UART Bridge Controller"
+config USB_SERIAL_CP210X
+	tristate "USB CP210x family of UART Bridge Controllers"
 	help
-	  Say Y here if you want to use a CP2101/CP2102 based USB to RS232
-	  converter.
+	  Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
+	  to RS232 converters.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cp2101.
+	  module will be called cp210x.
 
 config USB_SERIAL_CYPRESS_M8
 	tristate "USB Cypress M8 USB Serial Driver"
@@ -472,6 +472,15 @@ config USB_SERIAL_OTI6858
 	  To compile this driver as a module, choose M here: the
 	  module will be called oti6858.
 
+config USB_SERIAL_QUALCOMM
+	tristate "USB Qualcomm Serial modem"
+	help
+	  Say Y here if you have a Qualcomm USB modem device.  These are
+	  usually wireless cellular modems.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qcserial.
+
 config USB_SERIAL_SPCP8X5
 	tristate "USB SPCP8x5 USB To Serial Driver"
 	help
@@ -515,6 +524,15 @@ config USB_SERIAL_SIERRAWIRELESS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sierra.
 
+config USB_SERIAL_SYMBOL
+	tristate "USB Symbol Barcode driver (serial mode)"
+	help
+	  Say Y here if you want to use a Symbol USB Barcode device
+	  in serial emulation mode.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called symbolserial.
+
 config USB_SERIAL_TI
 	tristate "USB TI 3410/5052 Serial Driver"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index b75be91eb8f1..66619beb6cc0 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE)		+= aircable.o
 obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CH341)			+= ch341.o
-obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
+obj-$(CONFIG_USB_SERIAL_CP210X)			+= cp210x.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
 obj-$(CONFIG_USB_SERIAL_CYPRESS_M8)		+= cypress_m8.o
 obj-$(CONFIG_USB_SERIAL_DEBUG)			+= usb_debug.o
@@ -45,10 +45,12 @@ obj-$(CONFIG_USB_SERIAL_OPTICON)		+= opticon.o
 obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
+obj-$(CONFIG_USB_SERIAL_QUALCOMM)		+= qcserial.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index f61e3ca64305..ab4cc277aa65 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -1,5 +1,7 @@
 /*
  * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
+ * Copyright 2009, Boris Hajduk <boris@hajduk.org>
  *
  * ch341.c implements a serial port driver for the Winchiphead CH341.
  *
@@ -21,9 +23,39 @@
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
 
-#define DEFAULT_BAUD_RATE 2400
+#define DEFAULT_BAUD_RATE 9600
 #define DEFAULT_TIMEOUT   1000
 
+/* flags for IO-Bits */
+#define CH341_BIT_RTS (1 << 6)
+#define CH341_BIT_DTR (1 << 5)
+
+/******************************/
+/* interrupt pipe definitions */
+/******************************/
+/* always 4 interrupt bytes */
+/* first irq byte normally 0x08 */
+/* second irq byte base 0x7d + below */
+/* third irq byte base 0x94 + below */
+/* fourth irq byte normally 0xee */
+
+/* second interrupt byte */
+#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
+
+/* status returned in third interrupt answer byte, inverted in data
+   from irq */
+#define CH341_BIT_CTS 0x01
+#define CH341_BIT_DSR 0x02
+#define CH341_BIT_RI  0x04
+#define CH341_BIT_DCD 0x08
+#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
+
+/*******************************/
+/* baudrate calculation factor */
+/*******************************/
+#define CH341_BAUDBASE_FACTOR 1532620800
+#define CH341_BAUDBASE_DIVMAX 3
+
 static int debug;
 
 static struct usb_device_id id_table [] = {
@@ -34,9 +66,12 @@ static struct usb_device_id id_table [] = {
 MODULE_DEVICE_TABLE(usb, id_table);
 
 struct ch341_private {
-	unsigned baud_rate;
-	u8 dtr;
-	u8 rts;
+	spinlock_t lock; /* access lock */
+	wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
+	unsigned baud_rate; /* set baud rate */
+	u8 line_control; /* set line control value RTS/DTR */
+	u8 line_status; /* active status of modem control inputs */
+	u8 multi_status_change; /* status changed multiple since last call */
 };
 
 static int ch341_control_out(struct usb_device *dev, u8 request,
@@ -72,37 +107,28 @@ static int ch341_set_baudrate(struct usb_device *dev,
 {
 	short a, b;
 	int r;
+	unsigned long factor;
+	short divisor;
 
 	dbg("ch341_set_baudrate(%d)", priv->baud_rate);
-	switch (priv->baud_rate) {
-	case 2400:
-		a = 0xd901;
-		b = 0x0038;
-		break;
-	case 4800:
-		a = 0x6402;
-		b = 0x001f;
-		break;
-	case 9600:
-		a = 0xb202;
-		b = 0x0013;
-		break;
-	case 19200:
-		a = 0xd902;
-		b = 0x000d;
-		break;
-	case 38400:
-		a = 0x6403;
-		b = 0x000a;
-		break;
-	case 115200:
-		a = 0xcc03;
-		b = 0x0008;
-		break;
-	default:
+
+	if (!priv->baud_rate)
 		return -EINVAL;
+	factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
+	divisor = CH341_BAUDBASE_DIVMAX;
+
+	while ((factor > 0xfff0) && divisor) {
+		factor >>= 3;
+		divisor--;
 	}
 
+	if (factor > 0xfff0)
+		return -EINVAL;
+
+	factor = 0x10000 - factor;
+	a = (factor & 0xff00) | divisor;
+	b = factor & 0xff;
+
 	r = ch341_control_out(dev, 0x9a, 0x1312, a);
 	if (!r)
 		r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
@@ -110,19 +136,18 @@ static int ch341_set_baudrate(struct usb_device *dev,
 	return r;
 }
 
-static int ch341_set_handshake(struct usb_device *dev,
-			       struct ch341_private *priv)
+static int ch341_set_handshake(struct usb_device *dev, u8 control)
 {
-	dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
-	return ch341_control_out(dev, 0xa4,
-		~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
+	dbg("ch341_set_handshake(0x%02x)", control);
+	return ch341_control_out(dev, 0xa4, ~control, 0);
 }
 
-static int ch341_get_status(struct usb_device *dev)
+static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 {
 	char *buffer;
 	int r;
 	const unsigned size = 8;
+	unsigned long flags;
 
 	dbg("ch341_get_status()");
 
@@ -134,10 +159,15 @@ static int ch341_get_status(struct usb_device *dev)
 	if (r < 0)
 		goto out;
 
-	/* Not having the datasheet for the CH341, we ignore the bytes returned
-	 * from the device. Return error if the device did not respond in time.
-	 */
-	r = 0;
+	/* setup the private status if available */
+	if (r == 2) {
+		r = 0;
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+		priv->multi_status_change = 0;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	} else
+		r = -EPROTO;
 
 out:	kfree(buffer);
 	return r;
@@ -180,7 +210,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 		goto out;
 
 	/* expect 0xff 0xee */
-	r = ch341_get_status(dev);
+	r = ch341_get_status(dev, priv);
 	if (r < 0)
 		goto out;
 
@@ -192,12 +222,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	r = ch341_set_handshake(dev, priv);
+	r = ch341_set_handshake(dev, priv->line_control);
 	if (r < 0)
 		goto out;
 
 	/* expect 0x9f 0xee */
-	r = ch341_get_status(dev);
+	r = ch341_get_status(dev, priv);
 
 out:	kfree(buffer);
 	return r;
@@ -216,9 +246,10 @@ static int ch341_attach(struct usb_serial *serial)
 	if (!priv)
 		return -ENOMEM;
 
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->dtr = 1;
-	priv->rts = 1;
+	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r < 0)
@@ -231,6 +262,35 @@ error:	kfree(priv);
 	return r;
 }
 
+static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int c_cflag;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* shutdown our urbs */
+	dbg("%s - shutting down urbs", __func__);
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
+		if (c_cflag & HUPCL) {
+			/* drop DTR and RTS */
+			spin_lock_irqsave(&priv->lock, flags);
+			priv->line_control = 0;
+			spin_unlock_irqrestore(&priv->lock, flags);
+			ch341_set_handshake(port->serial->dev, 0);
+		}
+	}
+	wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+
 /* open this device, set default parameters */
 static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
@@ -242,14 +302,13 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("ch341_open()");
 
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->dtr = 1;
-	priv->rts = 1;
+	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
 		goto out;
 
-	r = ch341_set_handshake(serial->dev, priv);
+	r = ch341_set_handshake(serial->dev, priv->line_control);
 	if (r)
 		goto out;
 
@@ -257,6 +316,16 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (r)
 		goto out;
 
+	dbg("%s - submitting interrupt urb", __func__);
+	port->interrupt_in_urb->dev = serial->dev;
+	r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (r) {
+		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+			" error %d\n", __func__, r);
+		ch341_close(tty, port, NULL);
+		return -EPROTO;
+	}
+
 	r = usb_serial_generic_open(tty, port, filp);
 
 out:	return r;
@@ -270,46 +339,224 @@ static void ch341_set_termios(struct tty_struct *tty,
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned baud_rate;
+	unsigned long flags;
 
 	dbg("ch341_set_termios()");
 
+	if (!tty || !tty->termios)
+		return;
+
 	baud_rate = tty_get_baud_rate(tty);
 
-	switch (baud_rate) {
-	case 2400:
-	case 4800:
-	case 9600:
-	case 19200:
-	case 38400:
-	case 115200:
-		priv->baud_rate = baud_rate;
-		break;
-	default:
-		dbg("Rate %d not supported, using %d",
-			baud_rate, DEFAULT_BAUD_RATE);
-		priv->baud_rate = DEFAULT_BAUD_RATE;
+	priv->baud_rate = baud_rate;
+
+	if (baud_rate) {
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		ch341_set_baudrate(port->serial->dev, priv);
+	} else {
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
-	ch341_set_baudrate(port->serial->dev, priv);
+	ch341_set_handshake(port->serial->dev, priv->line_control);
 
 	/* Unimplemented:
 	 * (cflag & CSIZE) : data bits [5, 8]
 	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
 	 * (cflag & CSTOPB) : stop bits [1, 2]
 	 */
+}
+
+static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
+			  unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->line_control |= CH341_BIT_RTS;
+	if (set & TIOCM_DTR)
+		priv->line_control |= CH341_BIT_DTR;
+	if (clear & TIOCM_RTS)
+		priv->line_control &= ~CH341_BIT_RTS;
+	if (clear & TIOCM_DTR)
+		priv->line_control &= ~CH341_BIT_DTR;
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ch341_set_handshake(port->serial->dev, control);
+}
+
+static void ch341_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int actual_length = urb->actual_length;
+	int status;
+
+	dbg("%s (%d)", __func__, port->number);
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__,
+		    urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__,
+		    urb->status);
+		goto exit;
+	}
 
-	 /* Copy back the old hardware settings */
-	 tty_termios_copy_hw(tty->termios, old_termios);
-	 /* And re-encode with the new baud */
-	 tty_encode_baud_rate(tty, baud_rate, baud_rate);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+			      urb->actual_length, urb->transfer_buffer);
+
+	if (actual_length >= 4) {
+		struct ch341_private *priv = usb_get_serial_port_data(port);
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
+		if ((data[1] & CH341_MULT_STAT))
+			priv->multi_status_change = 1;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		wake_up_interruptible(&priv->delta_msr_wait);
+	}
+
+exit:
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status)
+		dev_err(&urb->dev->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, status);
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 prevstatus;
+	u8 status;
+	u8 changed;
+	u8 multi_change = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	prevstatus = priv->line_status;
+	priv->multi_status_change = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	while (!multi_change) {
+		interruptible_sleep_on(&priv->delta_msr_wait);
+		/* see if a signal did it */
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		status = priv->line_status;
+		multi_change = priv->multi_status_change;
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		changed = prevstatus ^ status;
+
+		if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
+		    ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
+		    ((arg & TIOCM_CD)  && (changed & CH341_BIT_DCD)) ||
+		    ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
+			return 0;
+		}
+		prevstatus = status;
+	}
+
+	return 0;
+}
+
+/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
+static int ch341_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	switch (cmd) {
+	case TIOCMIWAIT:
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		return wait_modem_info(port, arg);
+
+	default:
+		dbg("%s not supported = 0x%04x", __func__, cmd);
+		break;
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 mcr;
+	u8 status;
+	unsigned int result;
+
+	dbg("%s (%d)", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	mcr = priv->line_control;
+	status = priv->line_status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((mcr & CH341_BIT_DTR)		? TIOCM_DTR : 0)
+		  | ((mcr & CH341_BIT_RTS)	? TIOCM_RTS : 0)
+		  | ((status & CH341_BIT_CTS)	? TIOCM_CTS : 0)
+		  | ((status & CH341_BIT_DSR)	? TIOCM_DSR : 0)
+		  | ((status & CH341_BIT_RI)	? TIOCM_RI  : 0)
+		  | ((status & CH341_BIT_DCD)	? TIOCM_CD  : 0);
+
+	dbg("%s - result = %x", __func__, result);
+
+	return result;
+}
+
+
+static int ch341_reset_resume(struct usb_interface *intf)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_serial *serial = NULL;
+	struct ch341_private *priv;
+
+	serial = usb_get_intfdata(intf);
+	priv = usb_get_serial_port_data(serial->port[0]);
+
+	/*reconfigure ch341 serial port after bus-reset*/
+	ch341_configure(dev, priv);
+
+	usb_serial_resume(intf);
+
+	return 0;
 }
 
 static struct usb_driver ch341_driver = {
 	.name		= "ch341",
 	.probe		= usb_serial_probe,
 	.disconnect	= usb_serial_disconnect,
+	.suspend	= usb_serial_suspend,
+	.resume		= usb_serial_resume,
+	.reset_resume	= ch341_reset_resume,
 	.id_table	= id_table,
 	.no_dynamic_id	= 1,
+	.supports_autosuspend =	1,
 };
 
 static struct usb_serial_driver ch341_device = {
@@ -317,12 +564,17 @@ static struct usb_serial_driver ch341_device = {
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
-	.id_table         = id_table,
-	.usb_driver       = &ch341_driver,
-	.num_ports        = 1,
-	.open             = ch341_open,
-	.set_termios      = ch341_set_termios,
-	.attach           = ch341_attach,
+	.id_table          = id_table,
+	.usb_driver        = &ch341_driver,
+	.num_ports         = 1,
+	.open              = ch341_open,
+	.close             = ch341_close,
+	.ioctl             = ch341_ioctl,
+	.set_termios       = ch341_set_termios,
+	.tiocmget          = ch341_tiocmget,
+	.tiocmset          = ch341_tiocmset,
+	.read_int_callback = ch341_read_int_callback,
+	.attach            = ch341_attach,
 };
 
 static int __init ch341_init(void)
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp210x.c
index 9b4082b58c5b..e8d5133ce9c8 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp210x.c
@@ -11,10 +11,6 @@
  * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
  * control thanks to Munir Nassar nassarmu@real-time.com
  *
- * Outstanding Issues:
- *  Buffers are not flushed when the port is opened.
- *  Multiple calls to write() may fail with "Resource temporarily unavailable"
- *
  */
 
 #include <linux/kernel.h>
@@ -31,7 +27,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.07"
+#define DRIVER_VERSION "v0.08"
 #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
 
 /*
@@ -42,17 +38,21 @@ static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
 static void cp2101_cleanup(struct usb_serial_port *);
 static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
 							struct file*);
-static void cp2101_get_termios(struct tty_struct *);
+static void cp2101_get_termios(struct tty_struct *,
+	struct usb_serial_port *port);
+static void cp2101_get_termios_port(struct usb_serial_port *port,
+	unsigned int *cflagp, unsigned int *baudp);
 static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
 static int cp2101_tiocmget(struct tty_struct *, struct file *);
 static int cp2101_tiocmset(struct tty_struct *, struct file *,
 		unsigned int, unsigned int);
+static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+		unsigned int, unsigned int);
 static void cp2101_break_ctl(struct tty_struct *, int);
 static int cp2101_startup(struct usb_serial *);
 static void cp2101_shutdown(struct usb_serial *);
 
-
 static int debug;
 
 static struct usb_device_id id_table [] = {
@@ -91,6 +91,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
@@ -225,7 +226,7 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 	kfree(buf);
 
 	if (result != size) {
-		dev_err(&port->dev, "%s - Unable to send config request, "
+		dbg("%s - Unable to send config request, "
 				"request=0x%x size=%d result=%d\n",
 				__func__, request, size, result);
 		return -EPROTO;
@@ -276,7 +277,7 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 	kfree(buf);
 
 	if ((size > 2 && result != size) || result < 0) {
-		dev_err(&port->dev, "%s - Unable to send request, "
+		dbg("%s - Unable to send request, "
 				"request=0x%x size=%d result=%d\n",
 				__func__, request, size, result);
 		return -EPROTO;
@@ -301,6 +302,47 @@ static inline int cp2101_set_config_single(struct usb_serial_port *port,
 	return cp2101_set_config(port, request, &data, 2);
 }
 
+/*
+ * cp2101_quantise_baudrate
+ * Quantises the baud rate as per AN205 Table 1
+ */
+static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+	if      (baud <= 56)       baud = 0;
+	else if (baud <= 300)      baud = 300;
+	else if (baud <= 600)      baud = 600;
+	else if (baud <= 1200)     baud = 1200;
+	else if (baud <= 1800)     baud = 1800;
+	else if (baud <= 2400)     baud = 2400;
+	else if (baud <= 4000)     baud = 4000;
+	else if (baud <= 4803)     baud = 4800;
+	else if (baud <= 7207)     baud = 7200;
+	else if (baud <= 9612)     baud = 9600;
+	else if (baud <= 14428)    baud = 14400;
+	else if (baud <= 16062)    baud = 16000;
+	else if (baud <= 19250)    baud = 19200;
+	else if (baud <= 28912)    baud = 28800;
+	else if (baud <= 38601)    baud = 38400;
+	else if (baud <= 51558)    baud = 51200;
+	else if (baud <= 56280)    baud = 56000;
+	else if (baud <= 58053)    baud = 57600;
+	else if (baud <= 64111)    baud = 64000;
+	else if (baud <= 77608)    baud = 76800;
+	else if (baud <= 117028)   baud = 115200;
+	else if (baud <= 129347)   baud = 128000;
+	else if (baud <= 156868)   baud = 153600;
+	else if (baud <= 237832)   baud = 230400;
+	else if (baud <= 254234)   baud = 250000;
+	else if (baud <= 273066)   baud = 256000;
+	else if (baud <= 491520)   baud = 460800;
+	else if (baud <= 567138)   baud = 500000;
+	else if (baud <= 670254)   baud = 576000;
+	else if (baud <= 1053257)  baud = 921600;
+	else if (baud <= 1474560)  baud = 1228800;
+	else if (baud <= 2457600)  baud = 1843200;
+	else                       baud = 3686400;
+	return baud;
+}
+
 static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
 {
@@ -331,10 +373,12 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* Configure the termios structure */
-	cp2101_get_termios(tty);
+	cp2101_get_termios(tty, port);
 
 	/* Set the DTR and RTS pins low */
-	cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+	cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+			: port,
+		NULL, TIOCM_DTR | TIOCM_RTS, 0);
 
 	return 0;
 }
@@ -376,9 +420,31 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
  * from the device, corrects any unsupported values, and configures the
  * termios structure to reflect the state of the device
  */
-static void cp2101_get_termios (struct tty_struct *tty)
+static void cp2101_get_termios(struct tty_struct *tty,
+	struct usb_serial_port *port)
+{
+	unsigned int baud;
+
+	if (tty) {
+		cp2101_get_termios_port(tty->driver_data,
+			&tty->termios->c_cflag, &baud);
+		tty_encode_baud_rate(tty, baud, baud);
+	}
+
+	else {
+		unsigned int cflag;
+		cflag = 0;
+		cp2101_get_termios_port(port, &cflag, &baud);
+	}
+}
+
+/*
+ * cp2101_get_termios_port
+ * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ */
+static void cp2101_get_termios_port(struct usb_serial_port *port,
+	unsigned int *cflagp, unsigned int *baudp)
 {
-	struct usb_serial_port *port = tty->driver_data;
 	unsigned int cflag, modem_ctl[4];
 	unsigned int baud;
 	unsigned int bits;
@@ -388,12 +454,12 @@ static void cp2101_get_termios (struct tty_struct *tty)
 	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
 	/* Convert to baudrate */
 	if (baud)
-		baud = BAUD_RATE_GEN_FREQ / baud;
+		baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
 
 	dbg("%s - baud rate = %d", __func__, baud);
+	*baudp = baud;
 
-	tty_encode_baud_rate(tty, baud, baud);
-	cflag = tty->termios->c_cflag;
+	cflag = *cflagp;
 
 	cp2101_get_config(port, CP2101_BITS, &bits, 2);
 	cflag &= ~CSIZE;
@@ -499,7 +565,7 @@ static void cp2101_get_termios (struct tty_struct *tty)
 		cflag &= ~CRTSCTS;
 	}
 
-	tty->termios->c_cflag = cflag;
+	*cflagp = cflag;
 }
 
 static void cp2101_set_termios(struct tty_struct *tty,
@@ -517,46 +583,16 @@ static void cp2101_set_termios(struct tty_struct *tty,
 	tty->termios->c_cflag &= ~CMSPAR;
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = tty_get_baud_rate(tty);
+	baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
 
 	/* If the baud rate is to be updated*/
-	if (baud != tty_termios_baud_rate(old_termios)) {
-		switch (baud) {
-		case 0:
-		case 600:
-		case 1200:
-		case 1800:
-		case 2400:
-		case 4800:
-		case 7200:
-		case 9600:
-		case 14400:
-		case 19200:
-		case 28800:
-		case 38400:
-		case 55854:
-		case 57600:
-		case 115200:
-		case 127117:
-		case 230400:
-		case 460800:
-		case 921600:
-		case 3686400:
-			break;
-		default:
-			baud = 9600;
-			break;
-		}
-
-		if (baud) {
-			dbg("%s - Setting baud rate to %d baud", __func__,
-					baud);
-			if (cp2101_set_config_single(port, CP2101_BAUDRATE,
-						(BAUD_RATE_GEN_FREQ / baud))) {
-				dev_err(&port->dev, "Baud rate requested not "
-						"supported by device\n");
-				baud = tty_termios_baud_rate(old_termios);
-			}
+	if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
+		dbg("%s - Setting baud rate to %d baud", __func__,
+				baud);
+		if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
+			dbg("Baud rate requested not supported by device\n");
+			baud = tty_termios_baud_rate(old_termios);
 		}
 	}
 	/* Report back the resulting baud rate */
@@ -588,14 +624,14 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			dbg("%s - data bits = 9", __func__);
 			break;*/
 		default:
-			dev_err(&port->dev, "cp2101 driver does not "
+			dbg("cp2101 driver does not "
 					"support the number of bits requested,"
 					" using 8 bit mode\n");
 				bits |= BITS_DATA_8;
 				break;
 		}
 		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
-			dev_err(&port->dev, "Number of data bits requested "
+			dbg("Number of data bits requested "
 					"not supported by device\n");
 	}
 
@@ -612,7 +648,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			}
 		}
 		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
-			dev_err(&port->dev, "Parity mode not supported "
+			dbg("Parity mode not supported "
 					"by device\n");
 	}
 
@@ -627,7 +663,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			dbg("%s - stop bits = 1", __func__);
 		}
 		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
-			dev_err(&port->dev, "Number of stop bits requested "
+			dbg("Number of stop bits requested "
 					"not supported by device\n");
 	}
 
@@ -661,6 +697,12 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
 		unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
+	return cp2101_tiocmset_port(port, file, set, clear);
+}
+
+static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+		unsigned int set, unsigned int clear)
+{
 	unsigned int control = 0;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -685,7 +727,6 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
 	dbg("%s - control = 0x%.4x", __func__, control);
 
 	return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
-
 }
 
 static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ae84c326a540..dcc87aaa8628 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1938,18 +1938,16 @@ static void ftdi_process_read(struct work_struct *work)
 		/* Compare new line status to the old one, signal if different/
 		   N.B. packet may be processed more than once, but differences
 		   are only processed once.  */
-		if (priv != NULL) {
-			char new_status = data[packet_offset + 0] &
-							FTDI_STATUS_B0_MASK;
-			if (new_status != priv->prev_status) {
-				priv->diff_status |=
-					new_status ^ priv->prev_status;
-				wake_up_interruptible(&priv->delta_msr_wait);
-				priv->prev_status = new_status;
-			}
+		char new_status = data[packet_offset + 0] &
+						FTDI_STATUS_B0_MASK;
+		if (new_status != priv->prev_status) {
+			priv->diff_status |=
+				new_status ^ priv->prev_status;
+			wake_up_interruptible(&priv->delta_msr_wait);
+			priv->prev_status = new_status;
 		}
 
-		length = min(PKTSZ, urb->actual_length-packet_offset)-2;
+		length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
 		if (length < 0) {
 			dev_err(&port->dev, "%s - bad packet length: %d\n",
 				__func__, length+2);
@@ -2294,11 +2292,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 			   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
 			   0, 0,
 			   buf, 1, WDR_TIMEOUT);
-		if (ret < 0) {
-			dbg("%s Could not get modem status of device - err: %d", __func__,
-			    ret);
+		if (ret < 0)
 			return ret;
-		}
 		break;
 	case FT8U232AM:
 	case FT232BM:
@@ -2313,15 +2308,11 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 				   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
 				   0, priv->interface,
 				   buf, 2, WDR_TIMEOUT);
-		if (ret < 0) {
-			dbg("%s Could not get modem status of device - err: %d", __func__,
-			    ret);
+		if (ret < 0)
 			return ret;
-		}
 		break;
 	default:
 		return -EFAULT;
-		break;
 	}
 
 	return  (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 814909f1ee63..9d57cace3731 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -177,14 +177,6 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 	struct usb_serial_port *port;
 	int i, c = 0, r;
 
-#ifdef CONFIG_PM
-	/*
-	 * If this is an autoresume, don't submit URBs.
-	 * They will be submitted in the open function instead.
-	 */
-	if (serial->dev->auto_pm)
-		return 0;
-#endif
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		if (port->port.count && port->read_urb) {
@@ -196,6 +188,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 
 	return c ? -EIO : 0;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
 
 void usb_serial_generic_close(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 132be74d2b89..ef92095b0732 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -78,6 +78,7 @@ static int  ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void ipaq_close(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
+static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
 static void ipaq_shutdown(struct usb_serial *serial);
 static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -572,15 +573,10 @@ static struct usb_serial_driver ipaq_device = {
 	.description =		"PocketPC PDA",
 	.usb_driver = 		&ipaq_driver,
 	.id_table =		ipaq_id_table,
-	/*
-	 * some devices have an extra endpoint, which
-	 * must be ignored as it would make the core
-	 * create a second port which oopses when used
-	 */
-	.num_ports =		1,
 	.open =			ipaq_open,
 	.close =		ipaq_close,
 	.attach =		ipaq_startup,
+	.calc_num_ports =	ipaq_calc_num_ports,
 	.shutdown =		ipaq_shutdown,
 	.write =		ipaq_write,
 	.write_room =		ipaq_write_room,
@@ -956,14 +952,49 @@ static void ipaq_destroy_lists(struct usb_serial_port *port)
 }
 
 
+static int ipaq_calc_num_ports(struct usb_serial *serial)
+{
+	/*
+	 * some devices have 3 endpoints, the 3rd of which
+	 * must be ignored as it would make the core
+	 * create a second port which oopses when used
+	 */
+	int ipaq_num_ports = 1;
+
+	dbg("%s - numberofendpoints: %d", __FUNCTION__,
+		(int)serial->interface->cur_altsetting->desc.bNumEndpoints);
+
+	/*
+	 * a few devices have 4 endpoints, seemingly Yakuma devices,
+	 * and we need the second pair, so let them have 2 ports
+	 *
+	 * TODO: can we drop port 1 ?
+	 */
+	if (serial->interface->cur_altsetting->desc.bNumEndpoints > 3) {
+		ipaq_num_ports = 2;
+	}
+
+	return ipaq_num_ports;
+}
+
+
 static int ipaq_startup(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+		/*
+		 * FIXME: HP iPaq rx3715, possibly others, have 1 config that
+		 * is labeled as 2
+		 */
+
 		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);
 		return -ENODEV;
 	}
+
+	dbg("%s - iPAQ module configured for %d ports",
+		__FUNCTION__, serial->num_ports);
+
 	return usb_reset_configuration(serial->dev);
 }
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 9878c0fb3859..00daa8f7759a 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1507,7 +1507,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
 	} else {
 		dev_warn(&serial->interface->dev,
 			 "unsupported endpoint type %x\n",
-			 ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+			 usb_endpoint_type(ep_desc));
 		usb_free_urb(urb);
 		return NULL;
 	}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index cea326f1f105..839583dc8b6a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -1,8 +1,8 @@
 /*
  * Opticon USB barcode to serial driver
  *
- * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
- * Copyright (C) 2008 Novell Inc.
+ * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2008 - 2009 Novell Inc.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License version
@@ -14,6 +14,7 @@
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
+#include <linux/serial.h>
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
@@ -40,8 +41,12 @@ struct opticon_private {
 	bool throttled;
 	bool actually_throttled;
 	bool rts;
+	int outstanding_urbs;
 };
 
+/* max number of write urbs in flight */
+#define URB_UPPER_LIMIT	4
+
 static void opticon_bulk_callback(struct urb *urb)
 {
 	struct opticon_private *priv = urb->context;
@@ -106,7 +111,6 @@ static void opticon_bulk_callback(struct urb *urb)
 					priv->rts = false;
 				else
 					priv->rts = true;
-				/* FIXME change the RTS level */
 			} else {
 			dev_dbg(&priv->udev->dev,
 				"Unknown data packet received from the device:"
@@ -188,6 +192,120 @@ static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
 	usb_kill_urb(priv->bulk_read_urb);
 }
 
+static void opticon_write_bulk_callback(struct urb *urb)
+{
+	struct opticon_private *priv = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	/* free up the transfer buffer, as usb_free_urb() does not do this */
+	kfree(urb->transfer_buffer);
+
+	if (status)
+		dbg("%s - nonzero write bulk status received: %d",
+		    __func__, status);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	--priv->outstanding_urbs;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	usb_serial_port_softint(priv->port);
+}
+
+static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
+			 const unsigned char *buf, int count)
+{
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+	struct usb_serial *serial = port->serial;
+	struct urb *urb;
+	unsigned char *buffer;
+	unsigned long flags;
+	int status;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dbg("%s - write limit hit\n", __func__);
+		return 0;
+	}
+	priv->outstanding_urbs++;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	buffer = kmalloc(count, GFP_ATOMIC);
+	if (!buffer) {
+		dev_err(&port->dev, "out of memory\n");
+		count = -ENOMEM;
+		goto error_no_buffer;
+	}
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		dev_err(&port->dev, "no more free urbs\n");
+		count = -ENOMEM;
+		goto error_no_urb;
+	}
+
+	memcpy(buffer, buf, count);
+
+	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev,
+					  port->bulk_out_endpointAddress),
+			  buffer, count, opticon_write_bulk_callback, priv);
+
+	/* send it down the pipe */
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		dev_err(&port->dev,
+		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
+							__func__, status);
+		count = status;
+		goto error;
+	}
+
+	/* we are done with this urb, so let the host driver
+	 * really free it when it is finished with it */
+	usb_free_urb(urb);
+
+	return count;
+error:
+	usb_free_urb(urb);
+error_no_urb:
+	kfree(buffer);
+error_no_buffer:
+	spin_lock_irqsave(&priv->lock, flags);
+	--priv->outstanding_urbs;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return count;
+}
+
+static int opticon_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/*
+	 * We really can take almost anything the user throws at us
+	 * but let's pick a nice big number to tell the tty
+	 * layer that we have lots of free space, unless we don't.
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dbg("%s - write limit hit\n", __func__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 2048;
+}
+
 static void opticon_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -223,6 +341,67 @@ static void opticon_unthrottle(struct tty_struct *tty)
 							__func__, result);
 }
 
+static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+	int result = 0;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->rts)
+		result = TIOCM_RTS;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	dbg("%s - %x", __func__, result);
+	return result;
+}
+
+static int get_serial_info(struct opticon_private *priv,
+			   struct serial_struct __user *serial)
+{
+	struct serial_struct tmp;
+
+	if (!serial)
+		return -EFAULT;
+
+	memset(&tmp, 0x00, sizeof(tmp));
+
+	/* fake emulate a 16550 uart to make userspace code happy */
+	tmp.type		= PORT_16550A;
+	tmp.line		= priv->serial->minor;
+	tmp.port		= 0;
+	tmp.irq			= 0;
+	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+	tmp.xmit_fifo_size	= 1024;
+	tmp.baud_base		= 9600;
+	tmp.close_delay		= 5*HZ;
+	tmp.closing_wait	= 30*HZ;
+
+	if (copy_to_user(serial, &tmp, sizeof(*serial)))
+		return -EFAULT;
+	return 0;
+}
+
+static int opticon_ioctl(struct tty_struct *tty, struct file *file,
+			 unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+
+	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return get_serial_info(priv,
+				       (struct serial_struct __user *)arg);
+	}
+
+	return -ENOIOCTLCMD;
+}
+
 static int opticon_startup(struct usb_serial *serial)
 {
 	struct opticon_private *priv;
@@ -306,11 +485,37 @@ static void opticon_shutdown(struct usb_serial *serial)
 	usb_set_serial_data(serial, NULL);
 }
 
+static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	struct opticon_private *priv = usb_get_serial_data(serial);
+
+	usb_kill_urb(priv->bulk_read_urb);
+	return 0;
+}
+
+static int opticon_resume(struct usb_interface *intf)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	struct opticon_private *priv = usb_get_serial_data(serial);
+	struct usb_serial_port *port = serial->port[0];
+	int result;
+
+	mutex_lock(&port->mutex);
+	if (port->port.count)
+		result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO);
+	else
+		result = 0;
+	mutex_unlock(&port->mutex);
+	return result;
+}
 
 static struct usb_driver opticon_driver = {
 	.name =		"opticon",
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
+	.suspend =	opticon_suspend,
+	.resume =	opticon_resume,
 	.id_table =	id_table,
 	.no_dynamic_id = 	1,
 };
@@ -326,9 +531,13 @@ static struct usb_serial_driver opticon_device = {
 	.attach =		opticon_startup,
 	.open =			opticon_open,
 	.close =		opticon_close,
+	.write =		opticon_write,
+	.write_room = 		opticon_write_room,
 	.shutdown =		opticon_shutdown,
 	.throttle = 		opticon_throttle,
 	.unthrottle =		opticon_unthrottle,
+	.ioctl =		opticon_ioctl,
+	.tiocmget =		opticon_tiocmget,
 };
 
 static int __init opticon_init(void)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 61ebddc48497..d560c0b54e6e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -62,6 +62,8 @@ static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
 static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int  option_suspend(struct usb_serial *serial, pm_message_t message);
+static int  option_resume(struct usb_serial *serial);
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
@@ -523,6 +525,8 @@ static struct usb_driver option_driver = {
 	.name       = "option",
 	.probe      = usb_serial_probe,
 	.disconnect = usb_serial_disconnect,
+	.suspend    = usb_serial_suspend,
+	.resume     = usb_serial_resume,
 	.id_table   = option_ids,
 	.no_dynamic_id = 	1,
 };
@@ -551,6 +555,8 @@ static struct usb_serial_driver option_1port_device = {
 	.attach            = option_startup,
 	.shutdown          = option_shutdown,
 	.read_int_callback = option_instat_callback,
+	.suspend           = option_suspend,
+	.resume            = option_resume,
 };
 
 static int debug;
@@ -821,10 +827,10 @@ static void option_instat_callback(struct urb *urb)
 				req_pkt->bRequestType, req_pkt->bRequest);
 		}
 	} else
-		dbg("%s: error %d", __func__, status);
+		err("%s: error %d", __func__, status);
 
 	/* Resubmit urb so we continue receiving IRQ data */
-	if (status != -ESHUTDOWN) {
+	if (status != -ESHUTDOWN && status != -ENOENT) {
 		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err)
@@ -843,7 +849,6 @@ static int option_write_room(struct tty_struct *tty)
 
 	portdata = usb_get_serial_port_data(port);
 
-
 	for (i = 0; i < N_OUT_URB; i++) {
 		this_urb = portdata->out_urbs[i];
 		if (this_urb && !test_bit(i, &portdata->out_busy))
@@ -1105,14 +1110,12 @@ bail_out_error:
 	return 1;
 }
 
-static void option_shutdown(struct usb_serial *serial)
+static void stop_read_write_urbs(struct usb_serial *serial)
 {
 	int i, j;
 	struct usb_serial_port *port;
 	struct option_port_private *portdata;
 
-	dbg("%s", __func__);
-
 	/* Stop reading/writing urbs */
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
@@ -1122,6 +1125,17 @@ static void option_shutdown(struct usb_serial *serial)
 		for (j = 0; j < N_OUT_URB; j++)
 			usb_kill_urb(portdata->out_urbs[j]);
 	}
+}
+
+static void option_shutdown(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct option_port_private *portdata;
+
+	dbg("%s", __func__);
+
+	stop_read_write_urbs(serial);
 
 	/* Now free them */
 	for (i = 0; i < serial->num_ports; ++i) {
@@ -1152,6 +1166,66 @@ static void option_shutdown(struct usb_serial *serial)
 	}
 }
 
+static int option_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	dbg("%s entered", __func__);
+	stop_read_write_urbs(serial);
+
+	return 0;
+}
+
+static int option_resume(struct usb_serial *serial)
+{
+	int err, i, j;
+	struct usb_serial_port *port;
+	struct urb *urb;
+	struct option_port_private *portdata;
+
+	dbg("%s entered", __func__);
+	/* get the interrupt URBs resubmitted unconditionally */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!port->interrupt_in_urb) {
+			dbg("%s: No interrupt URB for port %d\n", __func__, i);
+			continue;
+		}
+		port->interrupt_in_urb->dev = serial->dev;
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+		if (err < 0) {
+			err("%s: Error %d for interrupt URB of port%d",
+				 __func__, err, i);
+			return err;
+		}
+	}
+
+	for (i = 0; i < serial->num_ports; i++) {
+		/* walk all ports */
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		mutex_lock(&port->mutex);
+
+		/* skip closed ports */
+		if (!port->port.count) {
+			mutex_unlock(&port->mutex);
+			continue;
+		}
+
+		for (j = 0; j < N_IN_URB; j++) {
+			urb = portdata->in_urbs[j];
+			err = usb_submit_urb(urb, GFP_NOIO);
+			if (err < 0) {
+				mutex_unlock(&port->mutex);
+				err("%s: Error %d for bulk URB %d",
+					 __func__, err, i);
+				return err;
+			}
+		}
+		mutex_unlock(&port->mutex);
+	}
+	return 0;
+}
+
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
new file mode 100644
index 000000000000..e6d6b0c17fd9
--- /dev/null
+++ b/drivers/usb/serial/qcserial.c
@@ -0,0 +1,147 @@
+/*
+ * Qualcomm Serial USB driver
+ *
+ *	Copyright (c) 2008 QUALCOMM Incorporated.
+ *	Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ *	Copyright (c) 2009 Novell Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Qualcomm Inc"
+#define DRIVER_DESC "Qualcomm USB Serial driver"
+
+static int debug;
+
+static struct usb_device_id id_table[] = {
+	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{ }				/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver qcdriver = {
+	.name			= "qcserial",
+	.probe			= usb_serial_probe,
+	.disconnect		= usb_serial_disconnect,
+	.id_table		= id_table,
+	.suspend		= usb_serial_suspend,
+	.resume			= usb_serial_resume,
+	.supports_autosuspend	= true,
+};
+
+static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+	int retval = -ENODEV;
+	__u8 nintf;
+	__u8 ifnum;
+
+	dbg("%s", __func__);
+
+	nintf = serial->dev->actconfig->desc.bNumInterfaces;
+	dbg("Num Interfaces = %d", nintf);
+	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	dbg("This Interface = %d", ifnum);
+
+	switch (nintf) {
+	case 1:
+		/* QDL mode */
+		if (serial->interface->num_altsetting == 2) {
+			struct usb_host_interface *intf;
+
+			intf = &serial->interface->altsetting[1];
+			if (intf->desc.bNumEndpoints == 2) {
+				if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+				    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+					dbg("QDL port found");
+					retval = usb_set_interface(serial->dev, ifnum, 1);
+					if (retval < 0) {
+						dev_err(&serial->dev->dev,
+							"Could not set interface, error %d\n",
+							retval);
+						retval = -ENODEV;
+					}
+					return retval;
+				}
+			}
+		}
+		break;
+
+	case 4:
+		/* Composite mode */
+		if (ifnum == 2) {
+			dbg("Modem port found");
+			retval = usb_set_interface(serial->dev, ifnum, 0);
+			if (retval < 0) {
+				dev_err(&serial->dev->dev,
+					"Could not set interface, error %d\n",
+					retval);
+				retval = -ENODEV;
+			}
+			return retval;
+		}
+		break;
+
+	default:
+		dev_err(&serial->dev->dev,
+			"unknown number of interfaces: %d\n", nintf);
+		return -ENODEV;
+	}
+
+	return retval;
+}
+
+static struct usb_serial_driver qcdevice = {
+	.driver = {
+		.owner     = THIS_MODULE,
+		.name      = "qcserial",
+	},
+	.description         = "Qualcomm USB modem",
+	.id_table            = id_table,
+	.usb_driver          = &qcdriver,
+	.num_ports           = 1,
+	.probe               = qcprobe,
+};
+
+static int __init qcinit(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&qcdevice);
+	if (retval)
+		return retval;
+
+	retval = usb_register(&qcdriver);
+	if (retval) {
+		usb_serial_deregister(&qcdevice);
+		return retval;
+	}
+
+	return 0;
+}
+
+static void __exit qcexit(void)
+{
+	usb_deregister(&qcdriver);
+	usb_serial_deregister(&qcdevice);
+}
+
+module_init(qcinit);
+module_exit(qcexit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
new file mode 100644
index 000000000000..8b3cbc87adc7
--- /dev/null
+++ b/drivers/usb/serial/symbolserial.c
@@ -0,0 +1,399 @@
+/*
+ * Symbol USB barcode to serial driver
+ *
+ * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2009 Novell Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static int debug;
+
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x05e0, 0x0600) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* This structure holds all of the individual device information */
+struct symbol_private {
+	struct usb_device *udev;
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	unsigned char *int_buffer;
+	struct urb *int_urb;
+	int buffer_size;
+	u8 bInterval;
+	u8 int_address;
+	spinlock_t lock;	/* protects the following flags */
+	bool throttled;
+	bool actually_throttled;
+	bool rts;
+};
+
+static void symbol_int_callback(struct urb *urb)
+{
+	struct symbol_private *priv = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	struct usb_serial_port *port = priv->port;
+	int status = urb->status;
+	struct tty_struct *tty;
+	int result;
+	int available_room = 0;
+	int data_length;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __func__, status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length,
+			      data);
+
+	if (urb->actual_length > 1) {
+		data_length = urb->actual_length - 1;
+
+		/*
+		 * Data from the device comes with a 1 byte header:
+		 *
+		 * <size of data>data...
+		 * 	This is real data to be sent to the tty layer
+		 * we pretty much just ignore the size and send everything
+		 * else to the tty layer.
+		 */
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			available_room = tty_buffer_request_room(tty,
+							data_length);
+			if (available_room) {
+				tty_insert_flip_string(tty, &data[1],
+						       available_room);
+				tty_flip_buffer_push(tty);
+			}
+			tty_kref_put(tty);
+		}
+	} else {
+		dev_dbg(&priv->udev->dev,
+			"Improper ammount of data received from the device, "
+			"%d bytes", urb->actual_length);
+	}
+
+exit:
+	spin_lock(&priv->lock);
+
+	/* Continue trying to always read if we should */
+	if (!priv->throttled) {
+		usb_fill_int_urb(priv->int_urb, priv->udev,
+				 usb_rcvintpipe(priv->udev,
+				 		priv->int_address),
+				 priv->int_buffer, priv->buffer_size,
+				 symbol_int_callback, priv, priv->bInterval);
+		result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
+		if (result)
+			dev_err(&port->dev,
+			    "%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
+	} else
+		priv->actually_throttled = true;
+	spin_unlock(&priv->lock);
+}
+
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
+			struct file *filp)
+{
+	struct symbol_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+	int result = 0;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->throttled = false;
+	priv->actually_throttled = false;
+	priv->port = port;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/*
+	 * Force low_latency on so that our tty_push actually forces the data
+	 * through, otherwise it is scheduled, and with high data rates (like
+	 * with OHCI) data can get lost.
+	 */
+	if (tty)
+		tty->low_latency = 1;
+
+	/* Start reading from the device */
+	usb_fill_int_urb(priv->int_urb, priv->udev,
+			 usb_rcvintpipe(priv->udev, priv->int_address),
+			 priv->int_buffer, priv->buffer_size,
+			 symbol_int_callback, priv, priv->bInterval);
+	result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
+	return result;
+}
+
+static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
+			  struct file *filp)
+{
+	struct symbol_private *priv = usb_get_serial_data(port->serial);
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* shutdown our urbs */
+	usb_kill_urb(priv->int_urb);
+}
+
+static void symbol_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct symbol_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+
+	dbg("%s - port %d", __func__, port->number);
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->throttled = true;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void symbol_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct symbol_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+	int result;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->throttled = false;
+	priv->actually_throttled = false;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	priv->int_urb->dev = port->serial->dev;
+	result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
+}
+
+static int symbol_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct device *dev = &port->dev;
+
+	/*
+	 * Right now we need to figure out what commands
+	 * most userspace tools want to see for this driver,
+	 * so just log the things.
+	 */
+	switch (cmd) {
+	case TIOCSERGETLSR:
+		dev_info(dev, "%s: TIOCSERGETLSR\n", __func__);
+		break;
+
+	case TIOCGSERIAL:
+		dev_info(dev, "%s: TIOCGSERIAL\n", __func__);
+		break;
+
+	case TIOCMIWAIT:
+		dev_info(dev, "%s: TIOCMIWAIT\n", __func__);
+		break;
+
+	case TIOCGICOUNT:
+		dev_info(dev, "%s: TIOCGICOUNT\n", __func__);
+		break;
+	default:
+		dev_info(dev, "%s: unknown (%d)\n", __func__, cmd);
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int symbol_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct device *dev = &port->dev;
+
+	/* TODO */
+	/* probably just need to shadow whatever was sent to us here */
+	dev_info(dev, "%s\n", __func__);
+	return 0;
+}
+
+static int symbol_tiocmset(struct tty_struct *tty, struct file *file,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct device *dev = &port->dev;
+
+	/* TODO */
+	/* probably just need to shadow whatever was sent to us here */
+	dev_info(dev, "%s\n", __func__);
+	return 0;
+}
+
+static int symbol_startup(struct usb_serial *serial)
+{
+	struct symbol_private *priv;
+	struct usb_host_interface *intf;
+	int i;
+	int retval = -ENOMEM;
+	bool int_in_found = false;
+
+	/* create our private serial structure */
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (priv == NULL) {
+		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+		return -ENOMEM;
+	}
+	spin_lock_init(&priv->lock);
+	priv->serial = serial;
+	priv->port = serial->port[0];
+	priv->udev = serial->dev;
+
+	/* find our interrupt endpoint */
+	intf = serial->interface->altsetting;
+	for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
+		struct usb_endpoint_descriptor *endpoint;
+
+		endpoint = &intf->endpoint[i].desc;
+		if (!usb_endpoint_is_int_in(endpoint))
+			continue;
+
+		priv->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!priv->int_urb) {
+			dev_err(&priv->udev->dev, "out of memory\n");
+			goto error;
+		}
+
+		priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+		priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
+		if (!priv->int_buffer) {
+			dev_err(&priv->udev->dev, "out of memory\n");
+			goto error;
+		}
+
+		priv->int_address = endpoint->bEndpointAddress;
+		priv->bInterval = endpoint->bInterval;
+
+		/* set up our int urb */
+		usb_fill_int_urb(priv->int_urb, priv->udev,
+				 usb_rcvintpipe(priv->udev,
+				 		endpoint->bEndpointAddress),
+				 priv->int_buffer, priv->buffer_size,
+				 symbol_int_callback, priv, priv->bInterval);
+
+		int_in_found = true;
+		break;
+		}
+
+	if (!int_in_found) {
+		dev_err(&priv->udev->dev,
+			"Error - the proper endpoints were not found!\n");
+		goto error;
+	}
+
+	usb_set_serial_data(serial, priv);
+	return 0;
+
+error:
+	usb_free_urb(priv->int_urb);
+	kfree(priv->int_buffer);
+	kfree(priv);
+	return retval;
+}
+
+static void symbol_shutdown(struct usb_serial *serial)
+{
+	struct symbol_private *priv = usb_get_serial_data(serial);
+
+	dbg("%s", __func__);
+
+	usb_kill_urb(priv->int_urb);
+	usb_free_urb(priv->int_urb);
+	kfree(priv->int_buffer);
+	kfree(priv);
+	usb_set_serial_data(serial, NULL);
+}
+
+static struct usb_driver symbol_driver = {
+	.name =			"symbol",
+	.probe =		usb_serial_probe,
+	.disconnect =		usb_serial_disconnect,
+	.id_table =		id_table,
+	.no_dynamic_id = 	1,
+};
+
+static struct usb_serial_driver symbol_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"symbol",
+	},
+	.id_table =		id_table,
+	.usb_driver = 		&symbol_driver,
+	.num_ports =		1,
+	.attach =		symbol_startup,
+	.open =			symbol_open,
+	.close =		symbol_close,
+	.shutdown =		symbol_shutdown,
+	.throttle = 		symbol_throttle,
+	.unthrottle =		symbol_unthrottle,
+	.ioctl = 		symbol_ioctl,
+	.tiocmget = 		symbol_tiocmget,
+	.tiocmset = 		symbol_tiocmset,
+};
+
+static int __init symbol_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&symbol_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&symbol_driver);
+	if (retval)
+		usb_serial_deregister(&symbol_device);
+	return retval;
+}
+
+static void __exit symbol_exit(void)
+{
+	usb_deregister(&symbol_driver);
+	usb_serial_deregister(&symbol_device);
+}
+
+module_init(symbol_init);
+module_exit(symbol_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cfcfd5ab06ce..742a5bc44be8 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -204,6 +204,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 		goto bailout_kref_put;
 	}
 
+	if (port->serial->disconnected) {
+		retval = -ENODEV;
+		goto bailout_kref_put;
+	}
+
 	if (mutex_lock_interruptible(&port->mutex)) {
 		retval = -ERESTARTSYS;
 		goto bailout_kref_put;
@@ -1067,6 +1072,8 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 	struct usb_serial_port *port;
 	int i, r = 0;
 
+	serial->suspending = 1;
+
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port)
@@ -1083,10 +1090,15 @@ EXPORT_SYMBOL(usb_serial_suspend);
 int usb_serial_resume(struct usb_interface *intf)
 {
 	struct usb_serial *serial = usb_get_intfdata(intf);
+	int rv;
 
+	serial->suspending = 0;
 	if (serial->type->resume)
-		return serial->type->resume(serial);
-	return 0;
+		rv = serial->type->resume(serial);
+	else
+		rv = usb_serial_generic_resume(serial);
+
+	return rv;
 }
 EXPORT_SYMBOL(usb_serial_resume);
 
@@ -1222,7 +1234,6 @@ static void fixup_generic(struct usb_serial_driver *device)
 	set_to_generic_if_null(device, read_bulk_callback);
 	set_to_generic_if_null(device, write_bulk_callback);
 	set_to_generic_if_null(device, shutdown);
-	set_to_generic_if_null(device, resume);
 }
 
 int usb_serial_register(struct usb_serial_driver *driver)
@@ -1230,6 +1241,9 @@ int usb_serial_register(struct usb_serial_driver *driver)
 	/* must be called with BKL held */
 	int retval;
 
+	if (usb_disabled())
+		return -ENODEV;
+
 	fixup_generic(driver);
 
 	if (!driver->description)
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 9df6887b91f6..8a372bac0e43 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,8 +2,8 @@
 # USB Storage driver configuration
 #
 
-comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;"
-comment "see USB_STORAGE Help for more information"
+comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
+comment "also be needed; see USB_STORAGE Help for more info"
 	depends on USB
 
 config USB_STORAGE
@@ -32,21 +32,25 @@ config USB_STORAGE_DEBUG
 	  verbose debugging messages.
 
 config USB_STORAGE_DATAFAB
-	bool "Datafab Compact Flash Reader support"
+	tristate "Datafab Compact Flash Reader support"
 	depends on USB_STORAGE
 	help
 	  Support for certain Datafab CompactFlash readers.
 	  Datafab has a web page at <http://www.datafabusa.com/>.
 
+	  If this driver is compiled as a module, it will be named ums-datafab.
+
 config USB_STORAGE_FREECOM
-	bool "Freecom USB/ATAPI Bridge support"
+	tristate "Freecom USB/ATAPI Bridge support"
 	depends on USB_STORAGE
 	help
 	  Support for the Freecom USB to IDE/ATAPI adaptor.
 	  Freecom has a web page at <http://www.freecom.de/>.
 
+	  If this driver is compiled as a module, it will be named ums-freecom.
+
 config USB_STORAGE_ISD200
-	bool "ISD-200 USB/ATA Bridge support"
+	tristate "ISD-200 USB/ATA Bridge support"
 	depends on USB_STORAGE
 	---help---
 	  Say Y here if you want to use USB Mass Store devices based
@@ -61,8 +65,10 @@ config USB_STORAGE_ISD200
 	  - CyQ've CQ8060A CDRW drive
 	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
 
+	  If this driver is compiled as a module, it will be named ums-isd200.
+
 config USB_STORAGE_USBAT
-	bool "USBAT/USBAT02-based storage support"
+	tristate "USBAT/USBAT02-based storage support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support storage devices
@@ -82,30 +88,38 @@ config USB_STORAGE_USBAT
 	  - RCA LYRA MP3 portable
 	  - Sandisk ImageMate SDDR-05b
 
+	  If this driver is compiled as a module, it will be named ums-usbat.
+
 config USB_STORAGE_SDDR09
-	bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
+	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Sandisk SDDR-09
 	  SmartMedia reader in the USB Mass Storage driver.
 	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
 
+	  If this driver is compiled as a module, it will be named ums-sddr09.
+
 config USB_STORAGE_SDDR55
-	bool "SanDisk SDDR-55 SmartMedia support"
+	tristate "SanDisk SDDR-55 SmartMedia support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Sandisk SDDR-55
 	  SmartMedia reader in the USB Mass Storage driver.
 
+	  If this driver is compiled as a module, it will be named ums-sddr55.
+
 config USB_STORAGE_JUMPSHOT
-	bool "Lexar Jumpshot Compact Flash Reader"
+	tristate "Lexar Jumpshot Compact Flash Reader"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Lexar Jumpshot
 	  USB CompactFlash reader.
 
+	  If this driver is compiled as a module, it will be named ums-jumpshot.
+
 config USB_STORAGE_ALAUDA
-	bool "Olympus MAUSB-10/Fuji DPC-R1 support"
+	tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Olympus MAUSB-10
@@ -114,8 +128,10 @@ config USB_STORAGE_ALAUDA
 	  These devices are based on the Alauda chip and support both
 	  XD and SmartMedia cards.
 
+	  If this driver is compiled as a module, it will be named ums-alauda.
+
 config USB_STORAGE_ONETOUCH
-	bool "Support OneTouch Button on Maxtor Hard Drives"
+	tristate "Support OneTouch Button on Maxtor Hard Drives"
 	depends on USB_STORAGE
 	depends on INPUT=y || INPUT=USB_STORAGE
 	help
@@ -127,8 +143,10 @@ config USB_STORAGE_ONETOUCH
 	  this input in any keybinding software. (e.g. gnome's keyboard short-
 	  cuts)
 
+	  If this driver is compiled as a module, it will be named ums-onetouch.
+
 config USB_STORAGE_KARMA
-	bool "Support for Rio Karma music player"
+	tristate "Support for Rio Karma music player"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Rio Karma
@@ -139,8 +157,10 @@ config USB_STORAGE_KARMA
 	  on the resulting scsi device node returns the Karma to normal
 	  operation.
 
+	  If this driver is compiled as a module, it will be named ums-karma.
+
 config USB_STORAGE_CYPRESS_ATACB
-	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
+	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
 	---help---
 	  Say Y here if you want to use SAT (ata pass through) on devices based
@@ -150,6 +170,8 @@ config USB_STORAGE_CYPRESS_ATACB
 	  If you say no here your device will still work with the standard usb
 	  mass storage class.
 
+	  If this driver is compiled as a module, it will be named ums-cypress.
+
 config USB_LIBUSUAL
 	bool "The shared table of common (or usual) storage devices"
 	depends on USB
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index b32069313390..5be54c019662 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -10,21 +10,36 @@ EXTRA_CFLAGS	:= -Idrivers/scsi
 obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
 
 usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)	+= debug.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT)	+= shuttle_usbat.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)	+= sddr09.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55)	+= sddr55.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)	+= freecom.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)	+= isd200.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= datafab.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
 
-ifneq ($(CONFIG_USB_LIBUSUAL),)
-	obj-$(CONFIG_USB)	+= libusual.o
+ifeq ($(CONFIG_USB_LIBUSUAL),)
+	usb-storage-objs	+= usual-tables.o
+else
+	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
 endif
+
+obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
+obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
+obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= ums-datafab.o
+obj-$(CONFIG_USB_STORAGE_FREECOM)	+= ums-freecom.o
+obj-$(CONFIG_USB_STORAGE_ISD200)	+= ums-isd200.o
+obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= ums-jumpshot.o
+obj-$(CONFIG_USB_STORAGE_KARMA)		+= ums-karma.o
+obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= ums-onetouch.o
+obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
+obj-$(CONFIG_USB_STORAGE_SDDR55)	+= ums-sddr55.o
+obj-$(CONFIG_USB_STORAGE_USBAT)		+= ums-usbat.o
+
+ums-alauda-objs		:= alauda.o
+ums-cypress-objs	:= cypress_atacb.o
+ums-datafab-objs	:= datafab.o
+ums-freecom-objs	:= freecom.o
+ums-isd200-objs		:= isd200.o
+ums-jumpshot-objs	:= jumpshot.o
+ums-karma-objs		:= karma.o
+ums-onetouch-objs	:= onetouch.o
+ums-sddr09-objs		:= sddr09.o
+ums-sddr55-objs		:= sddr55.o
+ums-usbat-objs		:= shuttle_usbat.o
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 8d3711a7ff06..67edc65acb8e 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -31,6 +31,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -39,7 +41,79 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "alauda.h"
+
+MODULE_DESCRIPTION("Driver for Alauda-based card readers");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR		0x01
+#define ALAUDA_STATUS_READY		0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS	0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS	0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE	0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE	0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG		0x86
+#define ALAUDA_GET_SM_MEDIA_SIG		0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD			0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA	0x85
+#define ALAUDA_BULK_READ_BLOCK		0x94
+#define ALAUDA_BULK_ERASE_BLOCK		0xa3
+#define ALAUDA_BULK_WRITE_BLOCK		0xb4
+#define ALAUDA_BULK_GET_STATUS2		0xb7
+#define ALAUDA_BULK_RESET_MEDIA		0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD			0x00
+#define ALAUDA_PORT_SM			0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF    0xffff
+#define SPARE    0xfffe
+#define UNUSABLE 0xfffd
+
+struct alauda_media_info {
+	unsigned long capacity;		/* total media size in bytes */
+	unsigned int pagesize;		/* page size in bytes */
+	unsigned int blocksize;		/* number of pages per block */
+	unsigned int uzonesize;		/* number of usable blocks per zone */
+	unsigned int zonesize;		/* number of blocks per zone */
+	unsigned int blockmask;		/* mask to get page from address */
+
+	unsigned char pageshift;
+	unsigned char blockshift;
+	unsigned char zoneshift;
+
+	u16 **lba_to_pba;		/* logical to physical block map */
+	u16 **pba_to_lba;		/* physical to logical block map */
+};
+
+struct alauda_info {
+	struct alauda_media_info port[2];
+	int wr_ep;			/* endpoint to write data out of */
+
+	unsigned char sense_key;
+	unsigned long sense_asc;	/* additional sense code */
+	unsigned long sense_ascq;	/* additional sense code qualifier */
+};
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
 #define LSB_of(s) ((s)&0xFF)
@@ -52,6 +126,48 @@
 #define PBA_HI(pba) (pba >> 3)
 #define PBA_ZONE(pba) (pba >> 11)
 
+static int init_alauda(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id alauda_usb_ids[] = {
+#	include "unusual_alauda.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev alauda_unusual_dev_list[] = {
+#	include "unusual_alauda.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * Media handling
  */
@@ -307,7 +423,8 @@ static int alauda_init_media(struct us_data *us)
 		data[0], data[1], data[2], data[3]);
 	media_info = alauda_card_find_id(data[1]);
 	if (media_info == NULL) {
-		printk("alauda_init_media: Unrecognised media signature: "
+		printk(KERN_WARNING
+			"alauda_init_media: Unrecognised media signature: "
 			"%02X %02X %02X %02X\n",
 			data[0], data[1], data[2], data[3]);
 		return USB_STOR_TRANSPORT_ERROR;
@@ -518,7 +635,8 @@ static int alauda_read_map(struct us_data *us, unsigned int zone)
 
 		/* check even parity */
 		if (parity[data[6] ^ data[7]]) {
-			printk("alauda_read_map: Bad parity in LBA for block %d"
+			printk(KERN_WARNING
+			       "alauda_read_map: Bad parity in LBA for block %d"
 			       " (%02X %02X)\n", i, data[6], data[7]);
 			pba_to_lba[i] = UNUSABLE;
 			continue;
@@ -538,13 +656,16 @@ static int alauda_read_map(struct us_data *us, unsigned int zone)
 		 */
 
 		if (lba_offset >= uzonesize) {
-			printk("alauda_read_map: Bad low LBA %d for block %d\n",
+			printk(KERN_WARNING
+			       "alauda_read_map: Bad low LBA %d for block %d\n",
 			       lba_real, blocknum);
 			continue;
 		}
 
 		if (lba_to_pba[lba_offset] != UNDEF) {
-			printk("alauda_read_map: LBA %d seen for PBA %d and %d\n",
+			printk(KERN_WARNING
+			       "alauda_read_map: "
+			       "LBA %d seen for PBA %d and %d\n",
 			       lba_real, lba_to_pba[lba_offset], blocknum);
 			continue;
 		}
@@ -712,13 +833,15 @@ static int alauda_write_lba(struct us_data *us, u16 lba,
 	if (pba == 1) {
 		/* Maybe it is impossible to write to PBA 1.
 		   Fake success, but don't do anything. */
-		printk("alauda_write_lba: avoid writing to pba 1\n");
+		printk(KERN_WARNING
+		       "alauda_write_lba: avoid writing to pba 1\n");
 		return USB_STOR_TRANSPORT_GOOD;
 	}
 
 	new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
 	if (!new_pba) {
-		printk("alauda_write_lba: Out of unused blocks\n");
+		printk(KERN_WARNING
+		       "alauda_write_lba: Out of unused blocks\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -818,7 +941,7 @@ static int alauda_read_data(struct us_data *us, unsigned long address,
 	len = min(sectors, blocksize) * (pagesize + 64);
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("alauda_read_data: Out of memory\n");
+		printk(KERN_WARNING "alauda_read_data: Out of memory\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -911,7 +1034,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address,
 	len = min(sectors, blocksize) * pagesize;
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("alauda_write_data: Out of memory\n");
+		printk(KERN_WARNING "alauda_write_data: Out of memory\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -921,7 +1044,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address,
 	 */
 	blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
 	if (blockbuffer == NULL) {
-		printk("alauda_write_data: Out of memory\n");
+		printk(KERN_WARNING "alauda_write_data: Out of memory\n");
 		kfree(buffer);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
@@ -991,7 +1114,7 @@ static void alauda_info_destructor(void *extra)
 /*
  * Initialize alauda_info struct and find the data-write endpoint
  */
-int init_alauda(struct us_data *us)
+static int init_alauda(struct us_data *us)
 {
 	struct alauda_info *info;
 	struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
@@ -1013,7 +1136,7 @@ int init_alauda(struct us_data *us)
 	return USB_STOR_TRANSPORT_GOOD;
 }
 
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int rc;
 	struct alauda_info *info = (struct alauda_info *) us->extra;
@@ -1121,3 +1244,48 @@ int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_FAILED;
 }
 
+static int alauda_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - alauda_usb_ids) + alauda_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name  = "Alauda Control/Bulk";
+	us->transport = alauda_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver alauda_driver = {
+	.name =		"ums-alauda",
+	.probe =	alauda_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	alauda_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init alauda_init(void)
+{
+	return usb_register(&alauda_driver);
+}
+
+static void __exit alauda_exit(void)
+{
+	usb_deregister(&alauda_driver);
+}
+
+module_init(alauda_init);
+module_exit(alauda_exit);
diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h
deleted file mode 100644
index a700f87d0803..000000000000
--- a/drivers/usb/storage/alauda.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Driver for Alauda-based card readers
- *
- * Current development and maintenance by:
- *    (c) 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See alauda.c for more explanation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_ALAUDA_H
-#define _USB_ALAUDA_H
-
-/*
- * Status bytes
- */
-#define ALAUDA_STATUS_ERROR		0x01
-#define ALAUDA_STATUS_READY		0x40
-
-/*
- * Control opcodes (for request field)
- */
-#define ALAUDA_GET_XD_MEDIA_STATUS	0x08
-#define ALAUDA_GET_SM_MEDIA_STATUS	0x98
-#define ALAUDA_ACK_XD_MEDIA_CHANGE	0x0a
-#define ALAUDA_ACK_SM_MEDIA_CHANGE	0x9a
-#define ALAUDA_GET_XD_MEDIA_SIG		0x86
-#define ALAUDA_GET_SM_MEDIA_SIG		0x96
-
-/*
- * Bulk command identity (byte 0)
- */
-#define ALAUDA_BULK_CMD			0x40
-
-/*
- * Bulk opcodes (byte 1)
- */
-#define ALAUDA_BULK_GET_REDU_DATA	0x85
-#define ALAUDA_BULK_READ_BLOCK		0x94
-#define ALAUDA_BULK_ERASE_BLOCK		0xa3
-#define ALAUDA_BULK_WRITE_BLOCK		0xb4
-#define ALAUDA_BULK_GET_STATUS2		0xb7
-#define ALAUDA_BULK_RESET_MEDIA		0xe0
-
-/*
- * Port to operate on (byte 8)
- */
-#define ALAUDA_PORT_XD			0x00
-#define ALAUDA_PORT_SM			0x01
-
-/*
- * LBA and PBA are unsigned ints. Special values.
- */
-#define UNDEF    0xffff
-#define SPARE    0xfffe
-#define UNUSABLE 0xfffd
-
-int init_alauda(struct us_data *us);
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct alauda_media_info {
-	unsigned long capacity;		/* total media size in bytes */
-	unsigned int pagesize;		/* page size in bytes */
-	unsigned int blocksize;		/* number of pages per block */
-	unsigned int uzonesize;		/* number of usable blocks per zone */
-	unsigned int zonesize;		/* number of blocks per zone */
-	unsigned int blockmask;		/* mask to get page from address */
-
-	unsigned char pageshift;
-	unsigned char blockshift;
-	unsigned char zoneshift;
-
-	u16 **lba_to_pba;		/* logical to physical block map */
-	u16 **pba_to_lba;		/* physical to logical block map */
-};
-
-struct alauda_info {
-	struct alauda_media_info port[2];
-	int wr_ep;			/* endpoint to write data out of */
-
-	unsigned char sense_key;
-	unsigned long sense_asc;	/* additional sense code */
-	unsigned long sense_ascq;	/* additional sense code qualifier */
-};
-
-#endif
-
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 898e67d30e56..c84471821183 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -19,6 +19,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_eh.h>
@@ -29,6 +30,49 @@
 #include "scsiglue.h"
 #include "debug.h"
 
+MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
+MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id cypress_usb_ids[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev cypress_unusual_dev_list[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * ATACB is a protocol used on cypress usb<->ata bridge to
  * send raw ATA command over mass storage
@@ -36,7 +80,7 @@
  * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
  * datasheet from cypress.com.
  */
-void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
+static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 {
 	unsigned char save_cmnd[MAX_COMMAND_SIZE];
 
@@ -133,19 +177,18 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
 		/* build the command for
 		 * reading the ATA registers */
-		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, 0);
-		srb->sdb.length = sizeof(regs);
-		sg_init_one(&ses.sense_sgl, regs, srb->sdb.length);
-		srb->sdb.table.sgl = &ses.sense_sgl;
-		srb->sc_data_direction = DMA_FROM_DEVICE;
-		srb->sdb.table.nents = 1;
+		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
+
 		/* we use the same command as before, but we set
 		 * the read taskfile bit, for not executing atacb command,
 		 * but reading register selected in srb->cmnd[4]
 		 */
+		srb->cmd_len = 16;
+		srb->cmnd = ses.cmnd;
 		srb->cmnd[2] = 1;
 
 		usb_stor_transparent_scsi_command(srb, us);
+		memcpy(regs, srb->sense_buffer, sizeof(regs));
 		tmp_result = srb->result;
 		scsi_eh_restore_cmnd(srb, &ses);
 		/* we fail to get registers, report invalid command */
@@ -162,8 +205,8 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
 		/* XXX we should generate sk, asc, ascq from status and error
 		 * regs
-		 * (see 11.1 Error translation ­ ATA device error to SCSI error map)
-		 * and ata_to_sense_error from libata.
+		 * (see 11.1 Error translation ATA device error to SCSI error
+		 *  map, and ata_to_sense_error from libata.)
 		 */
 
 		/* Sense data is current and format is descriptor. */
@@ -198,3 +241,48 @@ end:
 	if (srb->cmnd[0] == ATA_12)
 		srb->cmd_len = 12;
 }
+
+
+static int cypress_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - cypress_usb_ids) + cypress_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->protocol_name = "Transparent SCSI with Cypress ATACB";
+	us->proto_handler = cypress_atacb_passthrough;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver cypress_driver = {
+	.name =		"ums-cypress",
+	.probe =	cypress_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	cypress_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init cypress_init(void)
+{
+	return usb_register(&cypress_driver);
+}
+
+static void __exit cypress_exit(void)
+{
+	usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index 17f1ae232919..2b6e565262c2 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -49,6 +49,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -58,12 +59,65 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "datafab.h"
+
+MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+struct datafab_info {
+	unsigned long   sectors;	/* total sector count */
+	unsigned long   ssize;		/* sector size in bytes */
+	signed char	lun;		/* used for dual-slot readers */
+
+	/* the following aren't used yet */
+	unsigned char   sense_key;
+	unsigned long   sense_asc;	/* additional sense code */
+	unsigned long   sense_ascq;	/* additional sense code qualifier */
+};
 
 static int datafab_determine_lun(struct us_data *us,
 				 struct datafab_info *info);
 
 
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id datafab_usb_ids[] = {
+#	include "unusual_datafab.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev datafab_unusual_dev_list[] = {
+#	include "unusual_datafab.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 static inline int
 datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
 	if (len == 0)
@@ -500,7 +554,7 @@ static void datafab_info_destructor(void *extra)
 
 // Transport for the Datafab MDCFE-B
 //
-int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	struct datafab_info *info;
 	int rc;
@@ -665,3 +719,49 @@ int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
 	info->sense_ascq = 0x00;
 	return USB_STOR_TRANSPORT_FAILED;
 }
+
+static int datafab_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - datafab_usb_ids) + datafab_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name  = "Datafab Bulk-Only";
+	us->transport = datafab_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver datafab_driver = {
+	.name =		"ums-datafab",
+	.probe =	datafab_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	datafab_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init datafab_init(void)
+{
+	return usb_register(&datafab_driver);
+}
+
+static void __exit datafab_exit(void)
+{
+	usb_deregister(&datafab_driver);
+}
+
+module_init(datafab_init);
+module_exit(datafab_exit);
diff --git a/drivers/usb/storage/datafab.h b/drivers/usb/storage/datafab.h
deleted file mode 100644
index 32e3f271e582..000000000000
--- a/drivers/usb/storage/datafab.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Driver for Datafab MDCFE-B USB Compact Flash reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
- *
- * See datafab.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_DATAFAB_MDCFE_B_H
-#define _USB_DATAFAB_MDCFE_B_H
-
-extern int datafab_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct datafab_info {
-	unsigned long   sectors;	// total sector count
-	unsigned long   ssize;		// sector size in bytes
-	signed char	lun;		// used for dual-slot readers
-	
-	// the following aren't used yet
-	unsigned char   sense_key;
-	unsigned long   sense_asc;	// additional sense code
-	unsigned long   sense_ascq;	// additional sense code qualifier
-};
-
-#endif
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 73ac7262239e..54cc94277acb 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -26,6 +26,7 @@
  * (http://www.freecom.de/)
  */
 
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
@@ -33,7 +34,10 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "freecom.h"
+
+MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
+MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
+MODULE_LICENSE("GPL");
 
 #ifdef CONFIG_USB_STORAGE_DEBUG
 static void pdump (void *, int);
@@ -103,6 +107,47 @@ struct freecom_status {
 #define FCM_PACKET_LENGTH		64
 #define FCM_STATUS_PACKET_LENGTH	4
 
+static int init_freecom(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id freecom_usb_ids[] = {
+#	include "unusual_freecom.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev freecom_unusual_dev_list[] = {
+#	include "unusual_freecom.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
 static int
 freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
 		unsigned int ipipe, unsigned int opipe, int count)
@@ -173,7 +218,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
  * Transport for the Freecom USB/IDE adaptor.
  *
  */
-int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	struct freecom_cb_wrap *fcb;
 	struct freecom_status  *fst;
@@ -377,8 +422,7 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_GOOD;
 }
 
-int
-freecom_init (struct us_data *us)
+static int init_freecom(struct us_data *us)
 {
 	int result;
 	char *buffer = us->iobuf;
@@ -417,7 +461,7 @@ freecom_init (struct us_data *us)
 	return USB_STOR_TRANSPORT_GOOD;
 }
 
-int usb_stor_freecom_reset(struct us_data *us)
+static int usb_stor_freecom_reset(struct us_data *us)
 {
 	printk (KERN_CRIT "freecom reset called\n");
 
@@ -479,3 +523,48 @@ static void pdump (void *ibuffer, int length)
 }
 #endif
 
+static int freecom_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - freecom_usb_ids) + freecom_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name = "Freecom";
+	us->transport = freecom_transport;
+	us->transport_reset = usb_stor_freecom_reset;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver freecom_driver = {
+	.name =		"ums-freecom",
+	.probe =	freecom_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	freecom_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init freecom_init(void)
+{
+	return usb_register(&freecom_driver);
+}
+
+static void __exit freecom_exit(void)
+{
+	usb_deregister(&freecom_driver);
+}
+
+module_init(freecom_init);
+module_exit(freecom_exit);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 383abf2516a5..882c57b399f7 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -44,6 +44,7 @@
 
 #include <linux/jiffies.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/hdreg.h>
 #include <linux/scatterlist.h>
@@ -57,7 +58,53 @@
 #include "protocol.h"
 #include "debug.h"
 #include "scsiglue.h"
-#include "isd200.h"
+
+MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC");
+MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>");
+MODULE_LICENSE("GPL");
+
+static int isd200_Initialization(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id isd200_usb_ids[] = {
+#	include "unusual_isd200.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, isd200_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef USUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev isd200_unusual_dev_list[] = {
+#	include "unusual_isd200.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+#undef USUAL_DEV
 
 
 /* Timeout defines (in Seconds) */
@@ -1518,7 +1565,7 @@ static int isd200_init_info(struct us_data *us)
  * Initialization for the ISD200 
  */
 
-int isd200_Initialization(struct us_data *us)
+static int isd200_Initialization(struct us_data *us)
 {
 	US_DEBUGP("ISD200 Initialization...\n");
 
@@ -1549,7 +1596,7 @@ int isd200_Initialization(struct us_data *us)
  *
  */
 
-void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
+static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int sendToTransport = 1, orig_bufflen;
 	union ata_cdb ataCdb;
@@ -1570,3 +1617,47 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
 
 	isd200_srb_set_bufflen(srb, orig_bufflen);
 }
+
+static int isd200_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - isd200_usb_ids) + isd200_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->protocol_name = "ISD200 ATA/ATAPI";
+	us->proto_handler = isd200_ata_command;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver isd200_driver = {
+	.name =		"ums-isd200",
+	.probe =	isd200_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	isd200_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init isd200_init(void)
+{
+	return usb_register(&isd200_driver);
+}
+
+static void __exit isd200_exit(void)
+{
+	usb_deregister(&isd200_driver);
+}
+
+module_init(isd200_init);
+module_exit(isd200_exit);
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index df67f13c9e73..1c69420e3acf 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -46,6 +46,7 @@
   */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -55,9 +56,61 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "jumpshot.h"
 
 
+MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id jumpshot_usb_ids[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+struct jumpshot_info {
+   unsigned long   sectors;     /* total sector count */
+   unsigned long   ssize;       /* sector size in bytes */
+
+   /* the following aren't used yet */
+   unsigned char   sense_key;
+   unsigned long   sense_asc;   /* additional sense code */
+   unsigned long   sense_ascq;  /* additional sense code qualifier */
+};
+
 static inline int jumpshot_bulk_read(struct us_data *us,
 				     unsigned char *data, 
 				     unsigned int len)
@@ -429,7 +482,7 @@ static void jumpshot_info_destructor(void *extra)
 
 // Transport for the Lexar 'Jumpshot'
 //
-int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	struct jumpshot_info *info;
 	int rc;
@@ -592,3 +645,49 @@ int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
 	info->sense_ascq = 0x00;
 	return USB_STOR_TRANSPORT_FAILED;
 }
+
+static int jumpshot_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - jumpshot_usb_ids) + jumpshot_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name  = "Lexar Jumpshot Control/Bulk";
+	us->transport = jumpshot_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver jumpshot_driver = {
+	.name =		"ums-jumpshot",
+	.probe =	jumpshot_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	jumpshot_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init jumpshot_init(void)
+{
+	return usb_register(&jumpshot_driver);
+}
+
+static void __exit jumpshot_exit(void)
+{
+	usb_deregister(&jumpshot_driver);
+}
+
+module_init(jumpshot_init);
+module_exit(jumpshot_exit);
diff --git a/drivers/usb/storage/jumpshot.h b/drivers/usb/storage/jumpshot.h
deleted file mode 100644
index 19bac9d1558f..000000000000
--- a/drivers/usb/storage/jumpshot.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Driver for Lexar "Jumpshot" USB Compact Flash reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
- *
- * See jumpshot.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_JUMPSHOT_H
-#define _USB_JUMPSHOT_H
-
-extern int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct jumpshot_info {
-   unsigned long   sectors;     // total sector count
-   unsigned long   ssize;       // sector size in bytes
- 
-   // the following aren't used yet
-   unsigned char   sense_key;
-   unsigned long   sense_asc;   // additional sense code
-   unsigned long   sense_ascq;  // additional sense code qualifier
-};
-
-#endif
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index 0d79ae5683f7..7953d93a7739 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -18,6 +18,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -25,7 +27,10 @@
 #include "usb.h"
 #include "transport.h"
 #include "debug.h"
-#include "karma.h"
+
+MODULE_DESCRIPTION("Driver for Rio Karma");
+MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>");
+MODULE_LICENSE("GPL");
 
 #define RIO_PREFIX "RIOP\x00"
 #define RIO_PREFIX_LEN 5
@@ -36,13 +41,53 @@
 #define RIO_LEAVE_STORAGE 0x2
 #define RIO_RESET 0xC
 
-extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *);
-
 struct karma_data {
 	int in_storage;
 	char *recv;
 };
 
+static int rio_karma_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id karma_usb_ids[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, karma_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev karma_unusual_dev_list[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * Send commands to Rio Karma.
  *
@@ -104,7 +149,7 @@ err:
  * Trap START_STOP and READ_10 to leave/re-enter storage mode.
  * Everything else is propagated to the normal bulk layer.
  */
-int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int ret;
 	struct karma_data *data = (struct karma_data *) us->extra;
@@ -133,7 +178,7 @@ static void rio_karma_destructor(void *extra)
 	kfree(data->recv);
 }
 
-int rio_karma_init(struct us_data *us)
+static int rio_karma_init(struct us_data *us)
 {
 	int ret = 0;
 	struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
@@ -153,3 +198,48 @@ int rio_karma_init(struct us_data *us)
 out:
 	return ret;
 }
+
+static int karma_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - karma_usb_ids) + karma_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name = "Rio Karma/Bulk";
+	us->transport = rio_karma_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver karma_driver = {
+	.name =		"ums-karma",
+	.probe =	karma_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	karma_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init karma_init(void)
+{
+	return usb_register(&karma_driver);
+}
+
+static void __exit karma_exit(void)
+{
+	usb_deregister(&karma_driver);
+}
+
+module_init(karma_init);
+module_exit(karma_exit);
diff --git a/drivers/usb/storage/karma.h b/drivers/usb/storage/karma.h
deleted file mode 100644
index 8a60972af8c5..000000000000
--- a/drivers/usb/storage/karma.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _KARMA_USB_H
-#define _KARMA_USB_H
-
-extern int rio_karma_init(struct us_data *us);
-extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-#endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index f970b27ba308..fe3ffe1459b2 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -38,37 +38,6 @@ static atomic_t total_threads = ATOMIC_INIT(0);
 static int usu_probe_thread(void *arg);
 
 /*
- * The table.
- */
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName, useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
-  .driver_info = (flags) }
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = ((useType)<<24) }
-
-struct usb_device_id storage_usb_ids [] = {
-#	include "unusual_devs.h"
-	{ } /* Terminating entry */
-};
-
-#undef USUAL_DEV
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-
-MODULE_DEVICE_TABLE(usb, storage_usb_ids);
-EXPORT_SYMBOL_GPL(storage_usb_ids);
-
-/*
  * @type: the module type as an integer
  */
 void usb_usual_set_present(int type)
@@ -167,7 +136,7 @@ static struct usb_driver usu_driver = {
 	.name =		"libusual",
 	.probe =	usu_probe,
 	.disconnect =	usu_disconnect,
-	.id_table =	storage_usb_ids,
+	.id_table =	usb_storage_usb_ids,
 };
 
 /*
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index c7bf8954b4e4..380233bd6a39 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -35,9 +35,16 @@
 #include <linux/module.h>
 #include <linux/usb/input.h>
 #include "usb.h"
-#include "onetouch.h"
 #include "debug.h"
 
+MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
+MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
+MODULE_LICENSE("GPL");
+
+#define ONETOUCH_PKT_LEN        0x02
+#define ONETOUCH_BUTTON         KEY_PROG1
+
+static int onetouch_connect_input(struct us_data *ss);
 static void onetouch_release_input(void *onetouch_);
 
 struct usb_onetouch {
@@ -52,6 +59,46 @@ struct usb_onetouch {
 	unsigned int is_open:1;
 };
 
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id onetouch_usb_ids[] = {
+#	include "unusual_onetouch.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev onetouch_unusual_dev_list[] = {
+#	include "unusual_onetouch.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 static void usb_onetouch_irq(struct urb *urb)
 {
 	struct usb_onetouch *onetouch = urb->context;
@@ -127,7 +174,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action)
 }
 #endif /* CONFIG_PM */
 
-int onetouch_connect_input(struct us_data *ss)
+static int onetouch_connect_input(struct us_data *ss)
 {
 	struct usb_device *udev = ss->pusb_dev;
 	struct usb_host_interface *interface;
@@ -236,3 +283,46 @@ static void onetouch_release_input(void *onetouch_)
 				onetouch->data, onetouch->data_dma);
 	}
 }
+
+static int onetouch_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - onetouch_usb_ids) + onetouch_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* Use default transport and protocol */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver onetouch_driver = {
+	.name =		"ums-onetouch",
+	.probe =	onetouch_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	onetouch_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init onetouch_init(void)
+{
+	return usb_register(&onetouch_driver);
+}
+
+static void __exit onetouch_exit(void)
+{
+	usb_deregister(&onetouch_driver);
+}
+
+module_init(onetouch_init);
+module_exit(onetouch_exit);
diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h
deleted file mode 100644
index 41c7aa8f0446..000000000000
--- a/drivers/usb/storage/onetouch.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ONETOUCH_H_
-#define _ONETOUCH_H_
-
-#define ONETOUCH_PKT_LEN        0x02
-#define ONETOUCH_BUTTON         KEY_PROG1
-
-int onetouch_connect_input(struct us_data *ss);
-
-#endif
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index be441d84bc64..fc310f75eada 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -121,6 +121,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb,
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
 
 /***********************************************************************
  * Scatter-gather transfer buffer access routines
@@ -199,6 +200,7 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
 	/* Return the amount actually transferred */
 	return cnt;
 }
+EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
 
 /* Store the contents of buffer into srb's transfer buffer and set the
  * SCSI residue.
@@ -215,3 +217,4 @@ void usb_stor_set_xfer_buf(unsigned char *buffer,
 	if (buflen < scsi_bufflen(srb))
 		scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
 }
+EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 727c506417cc..4ca3b5860643 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -135,6 +135,12 @@ static int slave_configure(struct scsi_device *sdev)
 		if (sdev->request_queue->max_sectors > max_sectors)
 			blk_queue_max_sectors(sdev->request_queue,
 					      max_sectors);
+	} else if (sdev->type == TYPE_TAPE) {
+		/* Tapes need much higher max_sector limits, so just
+		 * raise it to the maximum possible (4 GB / 512) and
+		 * let the queue segment size sort out the real limit.
+		 */
+		blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF);
 	}
 
 	/* Some USB host controllers can't do DMA; they have to use PIO.
@@ -563,4 +569,4 @@ unsigned char usb_stor_sense_invalidCDB[18] = {
 	[7]	= 0x0a,			    /* additional length */
 	[12]	= 0x24			    /* Invalid Field in CDB */
 };
-
+EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 531ae5c5abf3..ab5f9f37575a 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -41,6 +41,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -51,7 +52,53 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "sddr09.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader");
+MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+static int usb_stor_sddr09_dpcm_init(struct us_data *us);
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+static int usb_stor_sddr09_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id sddr09_usb_ids[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr09_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev sddr09_unusual_dev_list[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
 
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -723,7 +770,7 @@ sddr09_read_data(struct us_data *us,
 	len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("sddr09_read_data: Out of memory\n");
+		printk(KERN_WARNING "sddr09_read_data: Out of memory\n");
 		return -ENOMEM;
 	}
 
@@ -838,7 +885,8 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
 	if (pba == UNDEF) {
 		pba = sddr09_find_unused_pba(info, lba);
 		if (!pba) {
-			printk("sddr09_write_lba: Out of unused blocks\n");
+			printk(KERN_WARNING
+			       "sddr09_write_lba: Out of unused blocks\n");
 			return -ENOSPC;
 		}
 		info->pba_to_lba[pba] = lba;
@@ -849,7 +897,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
 	if (pba == 1) {
 		/* Maybe it is impossible to write to PBA 1.
 		   Fake success, but don't do anything. */
-		printk("sddr09: avoid writing to pba 1\n");
+		printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
 		return 0;
 	}
 
@@ -954,7 +1002,7 @@ sddr09_write_data(struct us_data *us,
 	blocklen = (pagelen << info->blockshift);
 	blockbuffer = kmalloc(blocklen, GFP_NOIO);
 	if (!blockbuffer) {
-		printk("sddr09_write_data: Out of memory\n");
+		printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
 		return -ENOMEM;
 	}
 
@@ -965,7 +1013,7 @@ sddr09_write_data(struct us_data *us,
 	len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("sddr09_write_data: Out of memory\n");
+		printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
 		kfree(blockbuffer);
 		return -ENOMEM;
 	}
@@ -1112,7 +1160,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
 
 	if (result) {
 		US_DEBUGP("Result of read_deviceID is %d\n", result);
-		printk("sddr09: could not read card info\n");
+		printk(KERN_WARNING "sddr09: could not read card info\n");
 		return NULL;
 	}
 
@@ -1153,7 +1201,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
 		sprintf(blurbtxt + strlen(blurbtxt),
 			", WP");
 
-	printk("%s\n", blurbtxt);
+	printk(KERN_WARNING "%s\n", blurbtxt);
 
 	return cardinfo;
 }
@@ -1184,7 +1232,7 @@ sddr09_read_map(struct us_data *us) {
 	alloc_len = (alloc_blocks << CONTROL_SHIFT);
 	buffer = kmalloc(alloc_len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("sddr09_read_map: out of memory\n");
+		printk(KERN_WARNING "sddr09_read_map: out of memory\n");
 		result = -1;
 		goto done;
 	}
@@ -1198,7 +1246,7 @@ sddr09_read_map(struct us_data *us) {
 	info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
 
 	if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
-		printk("sddr09_read_map: out of memory\n");
+		printk(KERN_WARNING "sddr09_read_map: out of memory\n");
 		result = -1;
 		goto done;
 	}
@@ -1238,7 +1286,8 @@ sddr09_read_map(struct us_data *us) {
 			if (ptr[j] != 0)
 				goto nonz;
 		info->pba_to_lba[i] = UNUSABLE;
-		printk("sddr09: PBA %d has no logical mapping\n", i);
+		printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n",
+		       i);
 		continue;
 
 	nonz:
@@ -1251,7 +1300,8 @@ sddr09_read_map(struct us_data *us) {
 	nonff:
 		/* normal PBAs start with six FFs */
 		if (j < 6) {
-			printk("sddr09: PBA %d has no logical mapping: "
+			printk(KERN_WARNING
+			       "sddr09: PBA %d has no logical mapping: "
 			       "reserved area = %02X%02X%02X%02X "
 			       "data status %02X block status %02X\n",
 			       i, ptr[0], ptr[1], ptr[2], ptr[3],
@@ -1261,7 +1311,8 @@ sddr09_read_map(struct us_data *us) {
 		}
 
 		if ((ptr[6] >> 4) != 0x01) {
-			printk("sddr09: PBA %d has invalid address field "
+			printk(KERN_WARNING
+			       "sddr09: PBA %d has invalid address field "
 			       "%02X%02X/%02X%02X\n",
 			       i, ptr[6], ptr[7], ptr[11], ptr[12]);
 			info->pba_to_lba[i] = UNUSABLE;
@@ -1270,7 +1321,8 @@ sddr09_read_map(struct us_data *us) {
 
 		/* check even parity */
 		if (parity[ptr[6] ^ ptr[7]]) {
-			printk("sddr09: Bad parity in LBA for block %d"
+			printk(KERN_WARNING
+			       "sddr09: Bad parity in LBA for block %d"
 			       " (%02X %02X)\n", i, ptr[6], ptr[7]);
 			info->pba_to_lba[i] = UNUSABLE;
 			continue;
@@ -1289,7 +1341,8 @@ sddr09_read_map(struct us_data *us) {
 		 */
 
 		if (lba >= 1000) {
-			printk("sddr09: Bad low LBA %d for block %d\n",
+			printk(KERN_WARNING
+			       "sddr09: Bad low LBA %d for block %d\n",
 			       lba, i);
 			goto possibly_erase;
 		}
@@ -1297,7 +1350,8 @@ sddr09_read_map(struct us_data *us) {
 		lba += 1000*(i/0x400);
 
 		if (info->lba_to_pba[lba] != UNDEF) {
-			printk("sddr09: LBA %d seen for PBA %d and %d\n",
+			printk(KERN_WARNING
+			       "sddr09: LBA %d seen for PBA %d and %d\n",
 			       lba, info->lba_to_pba[lba], i);
 			goto possibly_erase;
 		}
@@ -1399,7 +1453,7 @@ sddr09_common_init(struct us_data *us) {
  * unusual devices list but called from here then LUN 0 of the combo reader
  * is not recognized. But I do not know what precisely these calls do.
  */
-int
+static int
 usb_stor_sddr09_dpcm_init(struct us_data *us) {
 	int result;
 	unsigned char *data = us->iobuf;
@@ -1449,7 +1503,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) {
 /*
  * Transport for the Microtech DPCM-USB
  */
-int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int ret;
 
@@ -1491,7 +1545,7 @@ int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Transport for the Sandisk SDDR-09
  */
-int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	static unsigned char sensekey = 0, sensecode = 0;
 	static unsigned char havefakesense = 0;
@@ -1690,7 +1744,60 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Initialization routine for the sddr09 subdriver
  */
-int
+static int
 usb_stor_sddr09_init(struct us_data *us) {
 	return sddr09_common_init(us);
 }
+
+static int sddr09_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - sddr09_usb_ids) + sddr09_unusual_dev_list);
+	if (result)
+		return result;
+
+	if (us->protocol == US_PR_DPCM_USB) {
+		us->transport_name = "Control/Bulk-EUSB/SDDR09";
+		us->transport = dpcm_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 1;
+	} else {
+		us->transport_name = "EUSB/SDDR09";
+		us->transport = sddr09_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 0;
+	}
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver sddr09_driver = {
+	.name =		"ums-sddr09",
+	.probe =	sddr09_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	sddr09_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init sddr09_init(void)
+{
+	return usb_register(&sddr09_driver);
+}
+
+static void __exit sddr09_exit(void)
+{
+	usb_deregister(&sddr09_driver);
+}
+
+module_init(sddr09_init);
+module_exit(sddr09_exit);
diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h
deleted file mode 100644
index b701172e12e3..000000000000
--- a/drivers/usb/storage/sddr09.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Driver for SanDisk SDDR-09 SmartMedia reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2002 Andries Brouwer (aeb@cwi.nl)
- *
- * See sddr09.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_SHUTTLE_EUSB_SDDR09_H
-#define _USB_SHUTTLE_EUSB_SDDR09_H
-
-/* Sandisk SDDR-09 stuff */
-
-extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_init(struct us_data *us);
-
-/* Microtech DPCM-USB stuff */
-
-extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
-
-#endif
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index 0d8df7577899..44dfed7754ed 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -24,6 +24,7 @@
 
 #include <linux/jiffies.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -33,7 +34,48 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "sddr55.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader");
+MODULE_AUTHOR("Simon Munton");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id sddr55_usb_ids[] = {
+#	include "unusual_sddr55.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr55_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev sddr55_unusual_dev_list[] = {
+#	include "unusual_sddr55.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
 
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -513,7 +555,8 @@ static int sddr55_read_deviceID(struct us_data *us,
 }
 
 
-int sddr55_reset(struct us_data *us) {
+static int sddr55_reset(struct us_data *us)
+{
 	return 0;
 }
 
@@ -703,7 +746,9 @@ static int sddr55_read_map(struct us_data *us) {
 		
 		if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED &&
 		    !info->force_read_only) {
-			printk("sddr55: map inconsistency at LBA %04X\n", lba + zone * 1000);
+			printk(KERN_WARNING
+			       "sddr55: map inconsistency at LBA %04X\n",
+			       lba + zone * 1000);
 			info->force_read_only = 1;
 		}
 
@@ -732,7 +777,7 @@ static void sddr55_card_info_destructor(void *extra) {
 /*
  * Transport for the Sandisk SDDR-55
  */
-int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int result;
 	static unsigned char inquiry_response[8] = {
@@ -929,3 +974,49 @@ int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer?
 }
 
+
+static int sddr55_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - sddr55_usb_ids) + sddr55_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name = "SDDR55";
+	us->transport = sddr55_transport;
+	us->transport_reset = sddr55_reset;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver sddr55_driver = {
+	.name =		"ums-sddr55",
+	.probe =	sddr55_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	sddr55_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init sddr55_init(void)
+{
+	return usb_register(&sddr55_driver);
+}
+
+static void __exit sddr55_exit(void)
+{
+	usb_deregister(&sddr55_driver);
+}
+
+module_init(sddr55_init);
+module_exit(sddr55_exit);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index ae6d64810d2a..b62a28814ebe 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -42,6 +42,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/cdrom.h>
 
@@ -52,7 +53,100 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "shuttle_usbat.h"
+
+MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+/* Supported device types */
+#define USBAT_DEV_HP8200	0x01
+#define USBAT_DEV_FLASH		0x02
+
+#define USBAT_EPP_PORT		0x10
+#define USBAT_EPP_REGISTER	0x30
+#define USBAT_ATA		0x40
+#define USBAT_ISA		0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG		0x00
+#define USBAT_CMD_WRITE_REG		0x01
+#define USBAT_CMD_READ_BLOCK	0x02
+#define USBAT_CMD_WRITE_BLOCK	0x03
+#define USBAT_CMD_COND_READ_BLOCK	0x04
+#define USBAT_CMD_COND_WRITE_BLOCK	0x05
+#define USBAT_CMD_WRITE_REGS	0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD	0x80
+#define USBAT_CMD_SET_FEAT	0x81
+#define USBAT_CMD_UIO		0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ	1
+#define USBAT_UIO_WRITE	0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ	0x20	/* full compare */
+#define USBAT_QUAL_ALQ	0x10	/* auto load subcount */
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE	0
+#define USBAT_FLASH_MEDIA_CF	1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME	0
+#define USBAT_FLASH_MEDIA_CHANGED	1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
+#define USBAT_ATA_ERROR     0x11  /* error (R) */
+#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
+#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS    0x17  /* device status (R) */
+#define USBAT_ATA_CMD       0x17  /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD		0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT		0x40 /* Card Detect (Read Only) */
+				     /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1		0x20 /* I/O 1 */
+#define USBAT_UIO_0		0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA	0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1		0x04 /* Input 1 */
+#define USBAT_UIO_UI0		0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK	0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST	0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD		0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1		0x20 /* I/O 1 set=output/clr=input */
+				     /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0		0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST	0x01 /* Reset SCM chip */
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN	0x80	/* External trigger enable */
+#define USBAT_FEAT_U1	0x08
+#define USBAT_FEAT_U0	0x04
+#define USBAT_FEAT_ET1	0x02
+#define USBAT_FEAT_ET2	0x01
+
+struct usbat_info {
+	int devicetype;
+
+	/* Used for Flash readers only */
+	unsigned long sectors;     /* total sector count */
+	unsigned long ssize;       /* sector size in bytes */
+
+	unsigned char sense_key;
+	unsigned long sense_asc;   /* additional sense code */
+	unsigned long sense_ascq;  /* additional sense code qualifier */
+};
 
 #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
 #define LSB_of(s) ((s)&0xFF)
@@ -63,6 +157,48 @@ static int transferred = 0;
 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
 
+static int init_usbat_cd(struct us_data *us);
+static int init_usbat_flash(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id usbat_usb_ids[] = {
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev usbat_unusual_dev_list[] = {
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
 /*
  * Convenience function to produce an ATA read/write sectors command
  * Use cmd=0x20 for read, cmd=0x30 for write
@@ -1684,37 +1820,61 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_FAILED;
 }
 
-int init_usbat_cd(struct us_data *us)
+static int init_usbat_cd(struct us_data *us)
 {
 	return init_usbat(us, USBAT_DEV_HP8200);
 }
 
-
-int init_usbat_flash(struct us_data *us)
+static int init_usbat_flash(struct us_data *us)
 {
 	return init_usbat(us, USBAT_DEV_FLASH);
 }
 
-int init_usbat_probe(struct us_data *us)
+static int usbat_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
 {
-	return init_usbat(us, 0);
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - usbat_usb_ids) + usbat_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* The actual transport will be determined later by the
+	 * initialization routine; this is just a placeholder.
+	 */
+	us->transport_name = "Shuttle USBAT";
+	us->transport = usbat_flash_transport;
+	us->transport_reset = usb_stor_CB_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
 }
 
-/*
- * Default transport function. Attempts to detect which transport function
- * should be called, makes it the new default, and calls it.
- *
- * This function should never be called. Our usbat_init() function detects the
- * device type and changes the us->transport ptr to the transport function
- * relevant to the device.
- * However, we'll support this impossible(?) case anyway.
- */
-int usbat_transport(struct scsi_cmnd *srb, struct us_data *us)
+static struct usb_driver usbat_driver = {
+	.name =		"ums-usbat",
+	.probe =	usbat_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usbat_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init usbat_init(void)
 {
-	struct usbat_info *info = (struct usbat_info*) (us->extra);
-
-	if (usbat_set_transport(us, info, 0))
-		return USB_STOR_TRANSPORT_ERROR;
+	return usb_register(&usbat_driver);
+}
 
-	return us->transport(srb, us);	
+static void __exit usbat_exit(void)
+{
+	usb_deregister(&usbat_driver);
 }
+
+module_init(usbat_init);
+module_exit(usbat_exit);
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
deleted file mode 100644
index d8bfc43e9044..000000000000
--- a/drivers/usb/storage/shuttle_usbat.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Driver for SCM Microsystems USB-ATAPI cable
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See shuttle_usbat.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_SHUTTLE_USBAT_H
-#define _USB_SHUTTLE_USBAT_H
-
-/* Supported device types */
-#define USBAT_DEV_HP8200	0x01
-#define USBAT_DEV_FLASH		0x02
-
-#define USBAT_EPP_PORT		0x10
-#define USBAT_EPP_REGISTER	0x30
-#define USBAT_ATA		0x40
-#define USBAT_ISA		0x50
-
-/* Commands (need to be logically OR'd with an access type */
-#define USBAT_CMD_READ_REG		0x00
-#define USBAT_CMD_WRITE_REG		0x01
-#define USBAT_CMD_READ_BLOCK	0x02
-#define USBAT_CMD_WRITE_BLOCK	0x03
-#define USBAT_CMD_COND_READ_BLOCK	0x04
-#define USBAT_CMD_COND_WRITE_BLOCK	0x05
-#define USBAT_CMD_WRITE_REGS	0x07
-
-/* Commands (these don't need an access type) */
-#define USBAT_CMD_EXEC_CMD	0x80
-#define USBAT_CMD_SET_FEAT	0x81
-#define USBAT_CMD_UIO		0x82
-
-/* Methods of accessing UIO register */
-#define USBAT_UIO_READ	1
-#define USBAT_UIO_WRITE	0
-
-/* Qualifier bits */
-#define USBAT_QUAL_FCQ	0x20	/* full compare */
-#define USBAT_QUAL_ALQ	0x10	/* auto load subcount */
-
-/* USBAT Flash Media status types */
-#define USBAT_FLASH_MEDIA_NONE	0
-#define USBAT_FLASH_MEDIA_CF	1
-
-/* USBAT Flash Media change types */
-#define USBAT_FLASH_MEDIA_SAME	0
-#define USBAT_FLASH_MEDIA_CHANGED	1
-
-/* USBAT ATA registers */
-#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
-#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
-#define USBAT_ATA_ERROR     0x11  /* error (R) */
-#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
-#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
-#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
-#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
-#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
-#define USBAT_ATA_STATUS    0x17  /* device status (R) */
-#define USBAT_ATA_CMD       0x17  /* device command (W) */
-#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
-
-/* USBAT User I/O Data registers */
-#define USBAT_UIO_EPAD		0x80 /* Enable Peripheral Control Signals */
-#define USBAT_UIO_CDT		0x40 /* Card Detect (Read Only) */
-				     /* CDT = ACKD & !UI1 & !UI0 */
-#define USBAT_UIO_1		0x20 /* I/O 1 */
-#define USBAT_UIO_0		0x10 /* I/O 0 */
-#define USBAT_UIO_EPP_ATA	0x08 /* 1=EPP mode, 0=ATA mode */
-#define USBAT_UIO_UI1		0x04 /* Input 1 */
-#define USBAT_UIO_UI0		0x02 /* Input 0 */
-#define USBAT_UIO_INTR_ACK	0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
-
-/* USBAT User I/O Enable registers */
-#define USBAT_UIO_DRVRST	0x80 /* Reset Peripheral */
-#define USBAT_UIO_ACKD		0x40 /* Enable Card Detect */
-#define USBAT_UIO_OE1		0x20 /* I/O 1 set=output/clr=input */
-				     /* If ACKD=1, set OE1 to 1 also. */
-#define USBAT_UIO_OE0		0x10 /* I/O 0 set=output/clr=input */
-#define USBAT_UIO_ADPRST	0x01 /* Reset SCM chip */
-
-/* USBAT Features */
-#define USBAT_FEAT_ETEN	0x80	/* External trigger enable */
-#define USBAT_FEAT_U1	0x08
-#define USBAT_FEAT_U0	0x04
-#define USBAT_FEAT_ET1	0x02
-#define USBAT_FEAT_ET2	0x01
-
-extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_usbat_cd(struct us_data *us);
-extern int init_usbat_flash(struct us_data *us);
-extern int init_usbat_probe(struct us_data *us);
-
-struct usbat_info {
-	int devicetype;
-
-	/* Used for Flash readers only */
-	unsigned long sectors;     /* total sector count */
-	unsigned long ssize;       /* sector size in bytes */
-
-	unsigned char sense_key;
-	unsigned long sense_asc;   /* additional sense code */
-	unsigned long sense_ascq;  /* additional sense code qualifier */
-};
-
-#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fb65d221cedf..d48c8553539d 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -220,6 +220,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
 		status = us->current_urb->actual_length;
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_stor_control_msg);
 
 /* This is a version of usb_clear_halt() that allows early termination and
  * doesn't read the status from the device -- this is because some devices
@@ -254,6 +255,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
 	US_DEBUGP("%s: result = %d\n", __func__, result);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
 
 
 /*
@@ -352,6 +354,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
 	return interpret_urb_result(us, pipe, size, result,
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer);
 
 /*
  * Receive one interrupt buffer, without timeouts, but allowing early
@@ -407,6 +410,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
 	return interpret_urb_result(us, pipe, length, result, 
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf);
 
 /*
  * Transfer a scatter-gather list via bulk transfer
@@ -474,6 +478,7 @@ int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
 	scsi_set_resid(srb, scsi_bufflen(srb) - partial);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_srb);
 
 /*
  * Transfer an entire SCSI command's worth of data payload over the bulk
@@ -509,6 +514,7 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
 		*residual = length_left;
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
 
 /***********************************************************************
  * Transport routines
@@ -940,6 +946,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 		usb_stor_clear_halt(us, pipe);
 	return USB_STOR_TRANSPORT_FAILED;
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_transport);
 
 /*
  * Bulk only transport
@@ -1156,6 +1163,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* we should never get here, but if we do, we're in trouble */
 	return USB_STOR_TRANSPORT_ERROR;
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
 
 /***********************************************************************
  * Reset routines
@@ -1230,6 +1238,7 @@ int usb_stor_CB_reset(struct us_data *us)
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE);
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
 
 /* This issues a Bulk-only Reset to the device in question, including
  * clearing the subsequent endpoint halts that may occur.
@@ -1242,6 +1251,7 @@ int usb_stor_Bulk_reset(struct us_data *us)
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, NULL, 0);
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
 
 /* Issue a USB port reset to the device.  The caller must not hold
  * us->dev_mutex.
diff --git a/drivers/usb/storage/freecom.h b/drivers/usb/storage/unusual_alauda.h
index 20d0fe6ba0c8..8c412f885dd2 100644
--- a/drivers/usb/storage/freecom.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -1,13 +1,4 @@
-/* Driver for Freecom USB/IDE adaptor
- *
- * Freecom v0.1:
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 David Brown <usb-storage@davidb.org>
- *
- * See freecom.c for more explanation
+/* Unusual Devices File for the Alauda-based card readers
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -24,11 +15,17 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _FREECOM_USB_H
-#define _FREECOM_USB_H
+#if defined(CONFIG_USB_STORAGE_ALAUDA) || \
+		defined(CONFIG_USB_STORAGE_ALAUDA_MODULE)
+
+UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
+		"Fujifilm",
+		"DPC-R1 (Alauda)",
+		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
 
-extern int freecom_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_freecom_reset(struct us_data *us);
-extern int freecom_init (struct us_data *us);
+UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
+		"Olympus",
+		"MAUSB-10 (Alauda)",
+		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
new file mode 100644
index 000000000000..44be6d75dab6
--- /dev/null
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -0,0 +1,34 @@
+/* Unusual Devices File for devices based on the Cypress USB/ATA bridge
+ *	with support for ATACB
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \
+		defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE)
+
+/* CY7C68300 : support atacb */
+UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress AT2LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress ISD-300LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
new file mode 100644
index 000000000000..c9298ce9f223
--- /dev/null
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -0,0 +1,98 @@
+/* Unusual Devices File for the Datafab USB Compact Flash reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_DATAFAB) || \
+		defined(CONFIG_USB_STORAGE_DATAFAB_MODULE)
+
+UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
+		"Datafab",
+		"MDCFE-B USB CF Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver.  Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
+UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
+		"SIIG/Datafab",
+		"SIIG/Datafab Memory Stick+CF Reader/Writer",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
+UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"MD2/MD3 Disk enclosure",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"Datafab-based Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"Datafab-based Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
+		"PNY/Datafab",
+		"PNY/Datafab CF+SM Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
+		"Simple Tech/Datafab",
+		"Simple Tech/Datafab CF+SM Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/* Submitted by Olaf Hering <olh@suse.de> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+		"Datafab Systems, Inc.",
+		"USB to CF + SM Combo (LC1)",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/* Reported by Felix Moeller <felix@derklecks.de>
+ * in Germany this is sold by Hama with the productnumber 46952
+ * as "DualSlot CompactFlash(TM) & MStick Drive USB"
+ */
+UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
+		"DataFab Systems Inc.",
+		"USB CF+MS",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+		"Acomdata",
+		"CF",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index cfde74a6faa3..1c1f643e8a78 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -53,6 +53,11 @@
  * as opposed to devices that do something strangely or wrongly.
  */
 
+#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
+		!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+#define NO_SDDR09
+#endif
+
 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
  */
 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
@@ -80,18 +85,6 @@ UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
 		"CD-Writer+",
 		US_SC_8070, US_PR_CB, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
-		"HP",
-		"CD-Writer+ 8200e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
-
-UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
-		"HP",
-		"CD-Writer+ CD-4e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
-#endif
-
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
 		"HP",
@@ -246,12 +239,7 @@ UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
-		"Microtech",
-		"CameraMate (DPCM_USB)",
- 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",
@@ -288,13 +276,6 @@ UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE ),
 
-#ifdef CONFIG_USB_STORAGE_KARMA
-UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
-		"Rio",
-		"Rio Karma",
-		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
-#endif
-
 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
  * Obviously the PROM has not been customized by the VAR;
  * the Vendor and Product string descriptors are:
@@ -375,22 +356,6 @@ UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_CB, NULL,
 		US_FL_MAX_SECTORS_MIN),
 
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-/* CY7C68300 : support atacb */
-UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
-		"Cypress",
-		"Cypress AT2LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-		0),
-
-/* CY7C68310 : support atacb and atacb2 */
-UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
-		"Cypress",
-		"Cypress ISD-300LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-		0),
-#endif
-
 /* Reported by Simon Levitt <simon@whattf.com>
  * This entry needs Sub and Proto fields */
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
@@ -467,20 +432,7 @@ UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 
 		US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
-		"Sandisk",
-		"ImageMate SDDR09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-
-/* This entry is from Andries.Brouwer@cwi.nl */
-UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
-		"SCM Microsystems",
-		"eUSB SmartMedia / CompactFlash Adapter",
-		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
-		0),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 		"SCM Microsystems",
 		"eUSB CompactFlash Adapter",
@@ -535,14 +487,6 @@ UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 		"CD-RW Device",
 		US_SC_8020, US_PR_CB, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
-		"Shuttle/SCM",
-		"USBAT-02",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
-		US_FL_SINGLE_LUN),
-#endif
-
 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
 UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 		"Samsung",
@@ -645,14 +589,6 @@ UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
-		"Sony",
-		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-#endif
-
 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
 UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
 		"Sony",
@@ -749,13 +685,6 @@ UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
 		"Silicon Media R/W",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
-		"Fujifilm",
-		"DPC-R1 (Alauda)",
- 		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
 /* Reported by RTE <raszilki@yandex.ru> */
 UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
 		"JetFlash",
@@ -798,32 +727,6 @@ UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 		US_SC_SCSI, US_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
-		"In-System",
-		"USB/IDE Bridge (ATA/ATAPI)",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
-		"In-System",
-		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
-		"In-System",
-		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
-		"In-System",
-		"USB Storage Adapter V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-#endif
-
 /* Submitted by Sven Anderson <sven-linux@anderson.de>
  * There are at least four ProductIDs used for iPods, so I added 0x1202 and
  * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
@@ -877,14 +780,6 @@ UNUSUAL_DEV(  0x05c6, 0x1000, 0x0000, 0x9999,
 		US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
 		0),
 
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
-		"Lexar",
-		"Jumpshot USB CF Reader",
-		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
-		US_FL_NEED_OVERRIDE ),
-#endif
-
 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
 UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 		"Lexar",
@@ -935,14 +830,6 @@ UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
 		"Floppy Drive",
 		US_SC_UFI, US_PR_CB, NULL, 0 ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
-		"Olympus",
-		"Camedia MAUSB-2",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-#endif
-
 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 		"SigmaTel",
@@ -1043,35 +930,12 @@ UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
-		"Sandisk",
-		"ImageMate SDDR-05b",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
-		US_FL_SINGLE_LUN ),
-#endif
-
 UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
 		"Sandisk",
 		"ImageMate SDDR-12",
 		US_SC_SCSI, US_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
-		"Sandisk",
-		"ImageMate SDDR-09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
-		"Freecom",
-		"USB-IDE",
-		US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
-#endif
-
 /* Reported by Eero Volotinen <eero@ping-viini.org> */
 UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
 		"Freecom Technologies",
@@ -1091,12 +955,7 @@ UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
-		"Microtech",
-		"CameraMate (DPCM_USB)",
- 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",
@@ -1104,108 +963,6 @@ UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		US_FL_SINGLE_LUN ),
 #endif
 
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
-		"Olympus",
-		"MAUSB-10 (Alauda)",
- 		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
-		"Datafab",
-		"MDCFE-B USB CF Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-/*
- * The following Datafab-based devices may or may not work
- * using the current driver...the 0xffff is arbitrary since I
- * don't know what device versions exist for these guys.
- *
- * The 0xa003 and 0xa004 devices in particular I'm curious about.
- * I'm told they exist but so far nobody has come forward to say that
- * they work with this driver.  Given the success we've had getting
- * other Datafab-based cards operational with this driver, I've decided
- * to leave these two devices in the list.
- */
-UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
-		"SIIG/Datafab",
-		"SIIG/Datafab Memory Stick+CF Reader/Writer",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
-UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
-		"Datafab/Unknown",
-		"MD2/MD3 Disk enclosure",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		US_FL_SINGLE_LUN ),
-
-UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
-		"Datafab/Unknown",
-		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
-		"Datafab/Unknown",
-		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
-		"PNY/Datafab",
-		"PNY/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
-		"Simple Tech/Datafab",
-		"Simple Tech/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-#endif
-		
-#ifdef CONFIG_USB_STORAGE_SDDR55
-/* Contributed by Peter Waechtler */
-UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
-		"Datafab",
-		"MDSM-B reader",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_FIX_INQUIRY ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Submitted by Olaf Hering <olh@suse.de> */
-UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
-		"Datafab Systems, Inc.",
-		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-/* SM part - aeb <Andries.Brouwer@cwi.nl> */
-UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
-		"Datafab Systems, Inc.",
-		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_SINGLE_LUN ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Reported by Felix Moeller <felix@derklecks.de>
- * in Germany this is sold by Hama with the productnumber 46952
- * as "DualSlot CompactFlash(TM) & MStick Drive USB"
- */
-UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
-		"DataFab Systems Inc.",
-		"USB CF+MS",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-#endif
-
 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
  * Only revision 1.13 tested (same for all of the above devices,
  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
@@ -1409,29 +1166,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
-		"ATI",
-		"USB Cable 205",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
-		"Acomdata",
-		"CF",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		US_FL_SINGLE_LUN ),
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
-		"Acomdata",
-		"SM",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_SINGLE_LUN ),
-#endif
-
 UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
 		"Maxtor",
 		"USB to SATA",
@@ -1448,23 +1182,6 @@ UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-/* Submitted by: Nick Sillik <n.sillik@temple.edu>
- * Needed for OneTouch extension to usb-storage
- *
- */
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
-	UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
-			"Maxtor",
-			"OneTouch External Harddrive",
-			US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
-			0),
-	UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
-			"Maxtor",
-			"OneTouch External Harddrive",
-			US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
-			0),
-#endif
-
 /* Submitted by Joris Struyve <joris@struyve.be> */
 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
 		"Medion",
@@ -2117,14 +1834,6 @@ UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
 		"Micro Mini 1GB",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR55
-UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999, 
-		"Sandisk",
-		"ImageMate SDDR55",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_SINGLE_LUN),
-#endif
-
 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
 UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
 		"DataStor",
diff --git a/drivers/usb/storage/cypress_atacb.h b/drivers/usb/storage/unusual_freecom.h
index fbada898d56b..375867942391 100644
--- a/drivers/usb/storage/cypress_atacb.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -1,8 +1,4 @@
-/*
- * Support for emulating SAT (ata pass through) on devices based
- *       on the Cypress USB/ATA bridge supporting ATACB.
- *
- * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
+/* Unusual Devices File for the Freecom USB/IDE adaptor
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -19,7 +15,12 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _CYPRESS_ATACB_H_
-#define _CYPRESS_ATACB_H_
-extern void cypress_atacb_passthrough(struct scsi_cmnd*, struct us_data*);
-#endif
+#if defined(CONFIG_USB_STORAGE_FREECOM) || \
+		defined(CONFIG_USB_STORAGE_FREECOM_MODULE)
+
+UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
+		"Freecom",
+		"USB-IDE",
+		US_SC_QIC, US_PR_FREECOM, init_freecom, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
new file mode 100644
index 000000000000..0d99dde3382a
--- /dev/null
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -0,0 +1,57 @@
+/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ISD200) || \
+		defined(CONFIG_USB_STORAGE_ISD200_MODULE)
+
+UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
+		"Sony",
+		"Portable USB Harddrive V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
+		"In-System",
+		"USB/IDE Bridge (ATA/ATAPI)",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
+		"In-System",
+		"Portable USB Harddrive V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
+		"In-System",
+		"Portable USB Harddrive V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
+		"In-System",
+		"USB Storage Adapter V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
+		"ATI",
+		"USB Cable 205",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
diff --git a/drivers/usb/storage/sddr55.h b/drivers/usb/storage/unusual_jumpshot.h
index a815a0470c84..2e549b1c2c62 100644
--- a/drivers/usb/storage/sddr55.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -1,10 +1,4 @@
-/* Driver for SanDisk SDDR-55 SmartMedia reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2002 Simon Munton
- *
- * See sddr55.c for more explanation
+/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -21,12 +15,13 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _USB_SHUTTLE_EUSB_SDDR55_H
-#define _USB_SHUTTLE_EUSB_SDDR55_H
-
-/* Sandisk SDDR-55 stuff */
+#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \
+		defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE)
 
-extern int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int sddr55_reset(struct us_data *us);
+UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
+		"Lexar",
+		"Jumpshot USB CF Reader",
+		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
+		US_FL_NEED_OVERRIDE),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
diff --git a/drivers/usb/storage/isd200.h b/drivers/usb/storage/unusual_karma.h
index 0a35f4fa78f8..12ae3a03e802 100644
--- a/drivers/usb/storage/isd200.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -1,11 +1,4 @@
-/* Header File for In-System Design, Inc. ISD200 ASIC
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 In-System Design, Inc. (support@in-system.com)
- *
- * See isd200.c for more information.
+/* Unusual Devices File for the Rio Karma
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -22,10 +15,12 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _USB_ISD200_H
-#define _USB_ISD200_H
+#if defined(CONFIG_USB_STORAGE_KARMA) || \
+		defined(CONFIG_USB_STORAGE_KARMA_MODULE)
 
-extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us);
-extern int isd200_Initialization(struct us_data *us);
+UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
+		"Rio",
+		"Rio Karma",
+		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
new file mode 100644
index 000000000000..bd9306b637df
--- /dev/null
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -0,0 +1,36 @@
+/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
+		defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE)
+
+/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+ * Needed for OneTouch extension to usb-storage
+ */
+UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
+		"Maxtor",
+		"OneTouch External Harddrive",
+		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		0),
+
+UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
+		"Maxtor",
+		"OneTouch External Harddrive",
+		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
new file mode 100644
index 000000000000..50cab511a4d7
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -0,0 +1,56 @@
+/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR09) || \
+		defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+/* This entry is from Andries.Brouwer@cwi.nl */
+UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
+		"SCM Microsystems",
+		"eUSB SmartMedia / CompactFlash Adapter",
+		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+		0),
+
+UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
+		"Olympus",
+		"Camedia MAUSB-2",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR-09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
new file mode 100644
index 000000000000..ae81ef7a1cfd
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -0,0 +1,44 @@
+/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR55) || \
+		defined(CONFIG_USB_STORAGE_SDDR55_MODULE)
+
+/* Contributed by Peter Waechtler */
+UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
+		"Datafab",
+		"MDSM-B reader",
+		US_SC_SCSI, US_PR_SDDR55, NULL,
+		US_FL_FIX_INQUIRY),
+
+/* SM part - aeb <Andries.Brouwer@cwi.nl> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+		"Datafab Systems, Inc.",
+		"USB to CF + SM Combo (LC1)",
+		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+		"Acomdata",
+		"SM",
+		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR55",
+		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
new file mode 100644
index 000000000000..80e869f10180
--- /dev/null
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -0,0 +1,43 @@
+/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_USBAT) || \
+		defined(CONFIG_USB_STORAGE_USBAT_MODULE)
+
+UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ 8200e",
+		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ CD-4e",
+		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
+		"Shuttle/SCM",
+		"USBAT-02",
+		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
+		"Sandisk",
+		"ImageMate SDDR-05b",
+		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 4becf495ca2d..8060b85fe1a3 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -5,7 +5,7 @@
  *
  * Developed with the assistance of:
  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
- *   (c) 2003 Alan Stern (stern@rowland.harvard.edu)
+ *   (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
  *
  * Initial work by:
  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
@@ -66,39 +66,6 @@
 #include "debug.h"
 #include "initializers.h"
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-#include "shuttle_usbat.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR09
-#include "sddr09.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-#include "sddr55.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_FREECOM
-#include "freecom.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ISD200
-#include "isd200.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-#include "datafab.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-#include "jumpshot.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
-#include "onetouch.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-#include "alauda.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_KARMA
-#include "karma.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-#include "cypress_atacb.h"
-#endif
 #include "sierra_ms.h"
 #include "option_ms.h"
 
@@ -118,36 +85,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
 
 /*
  * The entries in this table correspond, line for line,
- * with the entries of us_unusual_dev_list[].
+ * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
  */
-#ifndef CONFIG_USB_LIBUSUAL
-
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV	UNUSUAL_DEV
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = (USB_US_TYPE_STOR<<24) }
-
-static struct usb_device_id storage_usb_ids [] = {
-
-#	include "unusual_devs.h"
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-#undef USUAL_DEV
-	/* Terminating entry */
-	{ }
-};
-
-MODULE_DEVICE_TABLE (usb, storage_usb_ids);
-#endif /* CONFIG_USB_LIBUSUAL */
-
-/* This is the list of devices we recognize, along with their flag data */
 
 /* The vendor name should be kept at eight characters or less, and
  * the product name should be kept at 16 characters or less. If a device
@@ -179,18 +118,17 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
 
 static struct us_unusual_dev us_unusual_dev_list[] = {
 #	include "unusual_devs.h" 
-#	undef UNUSUAL_DEV
-#	undef COMPLIANT_DEV
-#	undef USUAL_DEV
-
-	/* Terminating entry */
-	{ NULL }
+	{ }		/* Terminating entry */
 };
 
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
 
 #ifdef CONFIG_PM	/* Minimal support for suspend and resume */
 
-static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -207,8 +145,9 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_suspend);
 
-static int storage_resume(struct usb_interface *iface)
+int usb_stor_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -221,8 +160,9 @@ static int storage_resume(struct usb_interface *iface)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_resume);
 
-static int storage_reset_resume(struct usb_interface *iface)
+int usb_stor_reset_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -235,6 +175,7 @@ static int storage_reset_resume(struct usb_interface *iface)
 	 * the device */
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
 
 #endif /* CONFIG_PM */
 
@@ -243,7 +184,7 @@ static int storage_reset_resume(struct usb_interface *iface)
  * a USB port reset, whether from this driver or a different one.
  */
 
-static int storage_pre_reset(struct usb_interface *iface)
+int usb_stor_pre_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -253,8 +194,9 @@ static int storage_pre_reset(struct usb_interface *iface)
 	mutex_lock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
 
-static int storage_post_reset(struct usb_interface *iface)
+int usb_stor_post_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -269,6 +211,7 @@ static int storage_post_reset(struct usb_interface *iface)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_post_reset);
 
 /*
  * fill_inquiry_response takes an unsigned char array (which must
@@ -311,6 +254,7 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data,
 
 	usb_stor_set_xfer_buf(data, data_len, us->srb);
 }
+EXPORT_SYMBOL_GPL(fill_inquiry_response);
 
 static int usb_stor_control_thread(void * __us)
 {
@@ -551,20 +495,13 @@ static void adjust_quirks(struct us_data *us)
 			vid, pid, f);
 }
 
-/* Find an unusual_dev descriptor (always succeeds in the current code) */
-static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
-{
-	const int id_index = id - storage_usb_ids;
-	return &us_unusual_dev_list[id_index];
-}
-
 /* Get the unusual_devs entries and the string descriptors */
-static int get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct usb_device *dev = us->pusb_dev;
 	struct usb_interface_descriptor *idesc =
 		&us->pusb_intf->cur_altsetting->desc;
-	struct us_unusual_dev *unusual_dev = find_unusual(id);
 
 	/* Store the entries */
 	us->unusual_dev = unusual_dev;
@@ -629,7 +566,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 }
 
 /* Get the transport settings */
-static int get_transport(struct us_data *us)
+static void get_transport(struct us_data *us)
 {
 	switch (us->protocol) {
 	case US_PR_CB:
@@ -651,100 +588,11 @@ static int get_transport(struct us_data *us)
 		us->transport = usb_stor_Bulk_transport;
 		us->transport_reset = usb_stor_Bulk_reset;
 		break;
-
-#ifdef CONFIG_USB_STORAGE_USBAT
-	case US_PR_USBAT:
-		us->transport_name = "Shuttle USBAT";
-		us->transport = usbat_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_SDDR09
-	case US_PR_EUSB_SDDR09:
-		us->transport_name = "EUSB/SDDR09";
-		us->transport = sddr09_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 0;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_SDDR55
-	case US_PR_SDDR55:
-		us->transport_name = "SDDR55";
-		us->transport = sddr55_transport;
-		us->transport_reset = sddr55_reset;
-		us->max_lun = 0;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DPCM
-	case US_PR_DPCM_USB:
-		us->transport_name = "Control/Bulk-EUSB/SDDR09";
-		us->transport = dpcm_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-	case US_PR_FREECOM:
-		us->transport_name = "Freecom";
-		us->transport = freecom_transport;
-		us->transport_reset = usb_stor_freecom_reset;
-		us->max_lun = 0;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-	case US_PR_DATAFAB:
-		us->transport_name  = "Datafab Bulk-Only";
-		us->transport = datafab_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-	case US_PR_JUMPSHOT:
-		us->transport_name  = "Lexar Jumpshot Control/Bulk";
-		us->transport = jumpshot_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-	case US_PR_ALAUDA:
-		us->transport_name  = "Alauda Control/Bulk";
-		us->transport = alauda_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_KARMA
-	case US_PR_KARMA:
-		us->transport_name = "Rio Karma/Bulk";
-		us->transport = rio_karma_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		break;
-#endif
-
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Transport: %s\n", us->transport_name);
-
-	/* fix for single-lun devices */
-	if (us->fflags & US_FL_SINGLE_LUN)
-		us->max_lun = 0;
-	return 0;
 }
 
 /* Get the protocol settings */
-static int get_protocol(struct us_data *us)
+static void get_protocol(struct us_data *us)
 {
 	switch (us->subclass) {
 	case US_SC_RBC:
@@ -779,26 +627,7 @@ static int get_protocol(struct us_data *us)
 		us->protocol_name = "Uniform Floppy Interface (UFI)";
 		us->proto_handler = usb_stor_ufi_command;
 		break;
-
-#ifdef CONFIG_USB_STORAGE_ISD200
-	case US_SC_ISD200:
-		us->protocol_name = "ISD200 ATA/ATAPI";
-		us->proto_handler = isd200_ata_command;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-	case US_SC_CYP_ATACB:
-		us->protocol_name = "Transparent SCSI with Cypress ATACB";
-		us->proto_handler = cypress_atacb_passthrough;
-		break;
-#endif
-
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Protocol: %s\n", us->protocol_name);
-	return 0;
 }
 
 /* Get the pipe settings */
@@ -846,12 +675,12 @@ static int get_pipes(struct us_data *us)
 	us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
 	us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
 	us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
-		ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		usb_endpoint_num(ep_out));
 	us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, 
-		ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		usb_endpoint_num(ep_in));
 	if (ep_int) {
 		us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
-			ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+			usb_endpoint_num(ep_int));
 		us->ep_bInterval = ep_int->bInterval;
 	}
 	return 0;
@@ -1012,17 +841,15 @@ static int usb_stor_scan_thread(void * __us)
 }
 
 
-/* Probe to see if we can drive a newly-connected USB device */
-static int storage_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
+/* First part of general USB mass-storage probing */
+int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct Scsi_Host *host;
 	struct us_data *us;
 	int result;
-	struct task_struct *th;
-
-	if (usb_usual_check_type(id, USB_US_TYPE_STOR))
-		return -ENXIO;
 
 	US_DEBUGP("USB Mass Storage device detected\n");
 
@@ -1041,7 +868,7 @@ static int storage_probe(struct usb_interface *intf,
 	 * Allow 16-byte CDBs and thus > 2TB
 	 */
 	host->max_cmd_len = 16;
-	us = host_to_us(host);
+	*pus = us = host_to_us(host);
 	memset(us, 0, sizeof(struct us_data));
 	mutex_init(&(us->dev_mutex));
 	init_completion(&us->cmnd_ready);
@@ -1054,24 +881,46 @@ static int storage_probe(struct usb_interface *intf,
 	if (result)
 		goto BadDevice;
 
-	/*
-	 * Get the unusual_devs entries and the descriptors
-	 *
-	 * id_index is calculated in the declaration to be the index number
-	 * of the match from the usb_device_id table, so we can find the
-	 * corresponding entry in the private table.
-	 */
-	result = get_device_info(us, id);
+	/* Get the unusual_devs entries and the descriptors */
+	result = get_device_info(us, id, unusual_dev);
 	if (result)
 		goto BadDevice;
 
-	/* Get the transport, protocol, and pipe settings */
-	result = get_transport(us);
-	if (result)
-		goto BadDevice;
-	result = get_protocol(us);
-	if (result)
+	/* Get standard transport and protocol settings */
+	get_transport(us);
+	get_protocol(us);
+
+	/* Give the caller a chance to fill in specialized transport
+	 * or protocol settings.
+	 */
+	return 0;
+
+BadDevice:
+	US_DEBUGP("storage_probe() failed\n");
+	release_everything(us);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe1);
+
+/* Second part of general USB mass-storage probing */
+int usb_stor_probe2(struct us_data *us)
+{
+	struct task_struct *th;
+	int result;
+
+	/* Make sure the transport and protocol have both been set */
+	if (!us->transport || !us->proto_handler) {
+		result = -ENXIO;
 		goto BadDevice;
+	}
+	US_DEBUGP("Transport: %s\n", us->transport_name);
+	US_DEBUGP("Protocol: %s\n", us->protocol_name);
+
+	/* fix for single-lun devices */
+	if (us->fflags & US_FL_SINGLE_LUN)
+		us->max_lun = 0;
+
+	/* Find the endpoints and calculate pipe values */
 	result = get_pipes(us);
 	if (result)
 		goto BadDevice;
@@ -1080,7 +929,7 @@ static int storage_probe(struct usb_interface *intf,
 	result = usb_stor_acquire_resources(us);
 	if (result)
 		goto BadDevice;
-	result = scsi_add_host(host, &intf->dev);
+	result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev);
 	if (result) {
 		printk(KERN_WARNING USB_STORAGE
 			"Unable to add the scsi host\n");
@@ -1108,9 +957,10 @@ BadDevice:
 	release_everything(us);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_probe2);
 
-/* Handle a disconnect event from the USB core */
-static void storage_disconnect(struct usb_interface *intf)
+/* Handle a USB mass-storage disconnect */
+void usb_stor_disconnect(struct usb_interface *intf)
 {
 	struct us_data *us = usb_get_intfdata(intf);
 
@@ -1118,6 +968,42 @@ static void storage_disconnect(struct usb_interface *intf)
 	quiesce_and_remove_host(us);
 	release_everything(us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+
+/* The main probe routine for standard devices */
+static int storage_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	/*
+	 * If libusual is configured, let it decide whether a standard
+	 * device should be handled by usb-storage or by ub.
+	 * If the device isn't standard (is handled by a subdriver
+	 * module) then don't accept it.
+	 */
+	if (usb_usual_check_type(id, USB_US_TYPE_STOR) ||
+			usb_usual_ignore_device(intf))
+		return -ENXIO;
+
+	/*
+	 * Call the general probe procedures.
+	 *
+	 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
+	 * table, so we use the index of the id entry to find the
+	 * corresponding unusual_devs entry.
+	 */
+	result = usb_stor_probe1(&us, intf, id,
+			(id - usb_storage_usb_ids) + us_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* No special transport or protocol settings in the main module */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
 
 /***********************************************************************
  * Initialization and registration
@@ -1126,15 +1012,13 @@ static void storage_disconnect(struct usb_interface *intf)
 static struct usb_driver usb_storage_driver = {
 	.name =		"usb-storage",
 	.probe =	storage_probe,
-	.disconnect =	storage_disconnect,
-#ifdef CONFIG_PM
-	.suspend =	storage_suspend,
-	.resume =	storage_resume,
-	.reset_resume =	storage_reset_resume,
-#endif
-	.pre_reset =	storage_pre_reset,
-	.post_reset =	storage_post_reset,
-	.id_table =	storage_usb_ids,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usb_storage_usb_ids,
 	.soft_unbind =	1,
 };
 
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 65e674e4be99..2609efb2bd7e 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -177,4 +177,25 @@ extern void fill_inquiry_response(struct us_data *us,
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend	NULL
+#define usb_stor_resume		NULL
+#define usb_stor_reset_resume	NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
 #endif
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
new file mode 100644
index 000000000000..468bde7d1971
--- /dev/null
+++ b/drivers/usb/storage/usual-tables.c
@@ -0,0 +1,116 @@
+/* Driver for USB Mass Storage devices
+ * Usual Tables File for usb-storage and libusual
+ *
+ * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+  .driver_info = ((useType)<<24) }
+
+struct usb_device_id usb_storage_usb_ids[] = {
+#	include "unusual_devs.h"
+	{ }		/* Terminating entry */
+};
+EXPORT_SYMBOL_GPL(usb_storage_usb_ids);
+
+MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
+
+/*
+ * The table of devices to ignore
+ */
+struct ignore_entry {
+	u16	vid, pid, bcdmin, bcdmax;
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{					\
+	.vid	= id_vendor,		\
+	.pid 	= id_product,		\
+	.bcdmin	= bcdDeviceMin,		\
+	.bcdmax = bcdDeviceMax,		\
+}
+
+static struct ignore_entry ignore_ids[] = {
+#	include "unusual_alauda.h"
+#	include "unusual_cypress.h"
+#	include "unusual_datafab.h"
+#	include "unusual_freecom.h"
+#	include "unusual_isd200.h"
+#	include "unusual_jumpshot.h"
+#	include "unusual_karma.h"
+#	include "unusual_onetouch.h"
+#	include "unusual_sddr09.h"
+#	include "unusual_sddr55.h"
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/* Return an error if a device is in the ignore_ids list */
+int usb_usual_ignore_device(struct usb_interface *intf)
+{
+	struct usb_device *udev;
+	unsigned vid, pid, bcd;
+	struct ignore_entry *p;
+
+	udev = interface_to_usbdev(intf);
+	vid = le16_to_cpu(udev->descriptor.idVendor);
+	pid = le16_to_cpu(udev->descriptor.idProduct);
+	bcd = le16_to_cpu(udev->descriptor.bcdDevice);
+
+	for (p = ignore_ids; p->vid; ++p) {
+		if (p->vid == vid && p->pid == pid &&
+				p->bcdmin <= bcd && p->bcdmax >= bcd)
+			return -ENXIO;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_usual_ignore_device);
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index be76084c8d7e..60ba631e99c2 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -410,7 +410,9 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i
 	}
 
 	/* let the user know what node this device is now attached to */
-	info("USB Skeleton device now attached to USBSkel-%d", interface->minor);
+	dev_info(&interface->dev,
+		 "USB Skeleton device now attached to USBSkel-%d",
+		 interface->minor);
 	return 0;
 
 error:
@@ -441,7 +443,7 @@ static void skel_disconnect(struct usb_interface *interface)
 	/* decrement our usage count */
 	kref_put(&dev->kref, skel_delete);
 
-	info("USB Skeleton #%d now disconnected", minor);
+	dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
 }
 
 static void skel_draw_down(struct usb_skel *dev)
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index 1335cbe1191d..25eae405f622 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -638,8 +638,7 @@ static void cbaf_disconnect(struct usb_interface *iface)
 	usb_put_intf(iface);
 	kfree(cbaf->buffer);
 	/* paranoia: clean up crypto keys */
-	memset(cbaf, 0, sizeof(*cbaf));
-	kfree(cbaf);
+	kzfree(cbaf);
 }
 
 static struct usb_device_id cbaf_id_table[] = {
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 8e18141bb2e0..f0aac0cf315a 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -889,6 +889,8 @@ static void wusb_dev_add_ncb(struct usb_device *usb_dev)
 	if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
 		return;		/* skip non wusb and wusb RHs */
 
+	usb_set_device_state(usb_dev, USB_STATE_UNAUTHENTICATED);
+
 	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
 	if (wusbhc == NULL)
 		goto error_nodev;
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index f4aa28eca70d..8118db7f1d8d 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -312,6 +312,7 @@ int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
 	result = wusb_set_dev_addr(wusbhc, wusb_dev, 0);
 	if (result < 0)
 		goto error_addr0;
+	usb_set_device_state(usb_dev, USB_STATE_DEFAULT);
 	usb_ep0_reinit(usb_dev);
 
 	/* Set new (authenticated) address. */
@@ -327,6 +328,7 @@ int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
 	result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address);
 	if (result < 0)
 		goto error_addr;
+	usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
 	usb_ep0_reinit(usb_dev);
 	usb_dev->authenticated = 1;
 error_addr: