Merge branch 'memdup_user_nul' into work.misc

28 files changed, 215 insertions, 72 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b30e7423549b..26ca4f910cb0 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1838,6 +1838,11 @@ static const struct usb_device_id acm_ids[] = {
 	},
 #endif
 
+	/* Exclude Infineon Flash Loader utility */
+	{ USB_DEVICE(0x058b, 0x0041),
+	.driver_info = IGNORE_DEVICE,
+	},
+
 	/* control interfaces without any protocol set */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_PROTO_NONE) },
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 7caff020106e..5050760f5e17 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -115,7 +115,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 		   USB_SS_MULT(desc->bmAttributes) > 3) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
-				"setting to 3\n", desc->bmAttributes + 1,
+				"setting to 3\n",
+				USB_SS_MULT(desc->bmAttributes),
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 2;
 	}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index bdeadc112d29..ddbf32d599cb 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -124,6 +124,10 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
 
 int usb_device_supports_lpm(struct usb_device *udev)
 {
+	/* Some devices have trouble with LPM */
+	if (udev->quirks & USB_QUIRK_NO_LPM)
+		return 0;
+
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
 	 */
@@ -1031,10 +1035,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	unsigned delay;
 
 	/* Continue a partial initialization */
-	if (type == HUB_INIT2)
-		goto init2;
-	if (type == HUB_INIT3)
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(hub->intfdev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected) {
+			device_unlock(hub->intfdev);
+			kref_put(&hub->kref, hub_release);
+			return;
+		}
+		if (type == HUB_INIT2)
+			goto init2;
 		goto init3;
+	}
+	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
 	 * value as an offset into the route string to locate the bits
@@ -1232,6 +1246,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			queue_delayed_work(system_power_efficient_wq,
 					&hub->init_work,
 					msecs_to_jiffies(delay));
+			device_unlock(hub->intfdev);
 			return;		/* Continues at init3: below */
 		} else {
 			msleep(delay);
@@ -1253,6 +1268,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
 		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+	if (type == HUB_INIT2 || type == HUB_INIT3)
+		device_unlock(hub->intfdev);
+
+	kref_put(&hub->kref, hub_release);
 }
 
 /* Implement the continuations for the delays above */
@@ -4512,6 +4532,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		goto fail;
 	}
 
+	usb_detect_quirks(udev);
+
 	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
@@ -4710,7 +4732,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (status < 0)
 			goto loop;
 
-		usb_detect_quirks(udev);
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(1000);
 
@@ -5326,9 +5347,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	if (udev->usb2_hw_lpm_enabled == 1)
 		usb_set_usb2_hardware_lpm(udev, 0);
 
-	bos = udev->bos;
-	udev->bos = NULL;
-
 	/* Disable LPM and LTM while we reset the device and reinstall the alt
 	 * settings.  Device-initiated LPM settings, and system exit latency
 	 * settings are cleared when the device is reset, so we have to set
@@ -5337,15 +5355,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	ret = usb_unlocked_disable_lpm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 	ret = usb_disable_ltm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LTM\n.",
 				__func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 
+	bos = udev->bos;
+	udev->bos = NULL;
+
 	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5442,10 +5463,11 @@ done:
 	return 0;
 
 re_enumerate:
-	/* LPM state doesn't matter when we're about to destroy the device. */
-	hub_port_logical_disconnect(parent_hub, port1);
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
+re_enumerate_no_bos:
+	/* LPM state doesn't matter when we're about to destroy the device. */
+	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }
 
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 210618319f10..5487fe308f01 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -206,7 +206,7 @@ static int link_peers(struct usb_port *left, struct usb_port *right)
 		else
 			method = "default";
 
-		pr_warn("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
+		pr_debug("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
 			dev_name(&left->dev), dev_name(&right->dev), method,
 			dev_name(&left->dev),
 			lpeer ? dev_name(&lpeer->dev) : "none",
@@ -265,7 +265,7 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right)
 	if (rc == 0) {
 		dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev));
 	} else {
-		dev_warn(&left->dev, "failed to peer to %s (%d)\n",
+		dev_dbg(&left->dev, "failed to peer to %s (%d)\n",
 				dev_name(&right->dev), rc);
 		pr_warn_once("usb: port power management may be unreliable\n");
 		usb_port_block_power_off = 1;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f5a381945db2..6dc810bce295 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -125,6 +125,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
 			USB_QUIRK_DEVICE_QUALIFIER },
 
+	{ USB_DEVICE(0x04f3, 0x21b8), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -199,6 +202,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Blackmagic Design Intensity Shuttle */
+	{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Blackmagic Design UltraStudio SDI */
+	{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
+
 	{ }  /* terminating entry must be last */
 };
 
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index e61d773cf65e..39c1cbf0e75d 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -125,9 +125,11 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
 	if (ret)
 		return ret;
 
-	ret = clk_prepare_enable(hsotg->clk);
-	if (ret)
-		return ret;
+	if (hsotg->clk) {
+		ret = clk_prepare_enable(hsotg->clk);
+		if (ret)
+			return ret;
+	}
 
 	if (hsotg->uphy)
 		ret = usb_phy_init(hsotg->uphy);
@@ -175,7 +177,8 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
 	if (ret)
 		return ret;
 
-	clk_disable_unprepare(hsotg->clk);
+	if (hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
 
 	ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
 				     hsotg->supplies);
@@ -212,14 +215,41 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 	 */
 	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
 	if (IS_ERR(hsotg->phy)) {
-		hsotg->phy = NULL;
+		ret = PTR_ERR(hsotg->phy);
+		switch (ret) {
+		case -ENODEV:
+		case -ENOSYS:
+			hsotg->phy = NULL;
+			break;
+		case -EPROBE_DEFER:
+			return ret;
+		default:
+			dev_err(hsotg->dev, "error getting phy %d\n", ret);
+			return ret;
+		}
+	}
+
+	if (!hsotg->phy) {
 		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
-		if (IS_ERR(hsotg->uphy))
-			hsotg->uphy = NULL;
-		else
-			hsotg->plat = dev_get_platdata(hsotg->dev);
+		if (IS_ERR(hsotg->uphy)) {
+			ret = PTR_ERR(hsotg->uphy);
+			switch (ret) {
+			case -ENODEV:
+			case -ENXIO:
+				hsotg->uphy = NULL;
+				break;
+			case -EPROBE_DEFER:
+				return ret;
+			default:
+				dev_err(hsotg->dev, "error getting usb phy %d\n",
+					ret);
+				return ret;
+			}
+		}
 	}
 
+	hsotg->plat = dev_get_platdata(hsotg->dev);
+
 	if (hsotg->phy) {
 		/*
 		 * If using the generic PHY framework, check if the PHY bus
@@ -229,11 +259,6 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 			hsotg->phyif = GUSBCFG_PHYIF8;
 	}
 
-	if (!hsotg->phy && !hsotg->uphy && !hsotg->plat) {
-		dev_err(hsotg->dev, "no platform data or transceiver defined\n");
-		return -EPROBE_DEFER;
-	}
-
 	/* Clock */
 	hsotg->clk = devm_clk_get(hsotg->dev, "otg");
 	if (IS_ERR(hsotg->clk)) {
@@ -342,20 +367,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (retval)
 		return retval;
 
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
-		dev_err(&dev->dev, "missing IRQ resource\n");
-		return irq;
-	}
-
-	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
-		irq);
-	retval = devm_request_irq(hsotg->dev, irq,
-				  dwc2_handle_common_intr, IRQF_SHARED,
-				  dev_name(hsotg->dev), hsotg);
-	if (retval)
-		return retval;
-
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	hsotg->regs = devm_ioremap_resource(&dev->dev, res);
 	if (IS_ERR(hsotg->regs))
@@ -390,6 +401,20 @@ static int dwc2_driver_probe(struct platform_device *dev)
 
 	dwc2_set_all_params(hsotg->core_params, -1);
 
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "missing IRQ resource\n");
+		return irq;
+	}
+
+	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
+		irq);
+	retval = devm_request_irq(hsotg->dev, irq,
+				  dwc2_handle_common_intr, IRQF_SHARED,
+				  dev_name(hsotg->dev), hsotg);
+	if (retval)
+		return retval;
+
 	retval = dwc2_lowlevel_hw_enable(hsotg);
 	if (retval)
 		return retval;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e24a01cc98df..a58376fd65fe 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1078,6 +1078,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 	 * little bit faster.
 	 */
 	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+			!usb_endpoint_xfer_int(dep->endpoint.desc) &&
 			!(dep->flags & DWC3_EP_BUSY)) {
 		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
 		goto out;
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index adc6d52efa46..cf43e9e18368 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -423,7 +423,7 @@ static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
 	spin_unlock_irq(&ffs->ev.waitq.lock);
 	mutex_unlock(&ffs->mutex);
 
-	return unlikely(__copy_to_user(buf, events, size)) ? -EFAULT : size;
+	return unlikely(copy_to_user(buf, events, size)) ? -EFAULT : size;
 }
 
 static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
@@ -513,7 +513,7 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 
 		/* unlocks spinlock */
 		ret = __ffs_ep0_queue_wait(ffs, data, len);
-		if (likely(ret > 0) && unlikely(__copy_to_user(buf, data, len)))
+		if (likely(ret > 0) && unlikely(copy_to_user(buf, data, len)))
 			ret = -EFAULT;
 		goto done_mutex;
 
@@ -3493,7 +3493,7 @@ static char *ffs_prepare_buffer(const char __user *buf, size_t len)
 	if (unlikely(!data))
 		return ERR_PTR(-ENOMEM);
 
-	if (unlikely(__copy_from_user(data, buf, len))) {
+	if (unlikely(copy_from_user(data, buf, len))) {
 		kfree(data);
 		return ERR_PTR(-EFAULT);
 	}
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index 42acb45e1ab4..898a570319f1 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -370,6 +370,7 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (err) {
 			ERROR(midi, "%s queue req: %d\n",
 				    midi->out_ep->name, err);
+			free_ep_req(midi->out_ep, req);
 		}
 	}
 
@@ -545,7 +546,7 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req)
 		}
 	}
 
-	if (req->length > 0) {
+	if (req->length > 0 && ep->enabled) {
 		int err;
 
 		err = usb_ep_queue(ep, req, GFP_ATOMIC);
diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index 289ebca316d3..ad8c9b05572d 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -20,7 +20,7 @@
 #define UVC_ATTR(prefix, cname, aname) \
 static struct configfs_attribute prefix##attr_##cname = { \
 	.ca_name	= __stringify(aname),				\
-	.ca_mode	= S_IRUGO,					\
+	.ca_mode	= S_IRUGO | S_IWUGO,				\
 	.ca_owner	= THIS_MODULE,					\
 	.show		= prefix##cname##_show,				\
 	.store		= prefix##cname##_store,			\
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 670ac0b12f00..001a3b74a993 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -2536,6 +2536,9 @@ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state)
 	udc->pullup_resume = udc->pullup_on;
 	dplus_pullup(udc, 0);
 
+	if (udc->driver)
+		udc->driver->disconnect(&udc->gadget);
+
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 342ffd140122..8c6e15bd6ff0 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -473,6 +473,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 
+	pdev->dev.platform_data = pdata;
+
 	if (!of_property_read_u32(np, "num-ports", &ports))
 		pdata->ports = ports;
 
@@ -483,6 +485,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 		 */
 		if (i >= pdata->ports) {
 			pdata->vbus_pin[i] = -EINVAL;
+			pdata->overcurrent_pin[i] = -EINVAL;
 			continue;
 		}
 
@@ -513,10 +516,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 	}
 
 	at91_for_each_port(i) {
-		if (i >= pdata->ports) {
-			pdata->overcurrent_pin[i] = -EINVAL;
-			continue;
-		}
+		if (i >= pdata->ports)
+			break;
 
 		pdata->overcurrent_pin[i] =
 			of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
@@ -552,8 +553,6 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 		}
 	}
 
-	pdev->dev.platform_data = pdata;
-
 	device_init_wakeup(&pdev->dev, 1);
 	return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
 }
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index dc31c425ce01..9f1c0538b211 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -377,6 +377,10 @@ static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_f
 	if (std->pl_virt == NULL)
 		return -ENOMEM;
 	std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE);
+	if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) {
+		kfree(std->pl_virt);
+		return -EFAULT;
+	}
 
 	for (p = 0; p < std->num_pointers; p++) {
 		std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0230965fb78c..f980c239eded 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -733,8 +733,30 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 		if ((raw_port_status & PORT_RESET) ||
 				!(raw_port_status & PORT_PE))
 			return 0xffffffff;
-		if (time_after_eq(jiffies,
-					bus_state->resume_done[wIndex])) {
+		/* did port event handler already start resume timing? */
+		if (!bus_state->resume_done[wIndex]) {
+			/* If not, maybe we are in a host initated resume? */
+			if (test_bit(wIndex, &bus_state->resuming_ports)) {
+				/* Host initated resume doesn't time the resume
+				 * signalling using resume_done[].
+				 * It manually sets RESUME state, sleeps 20ms
+				 * and sets U0 state. This should probably be
+				 * changed, but not right now.
+				 */
+			} else {
+				/* port resume was discovered now and here,
+				 * start resume timing
+				 */
+				unsigned long timeout = jiffies +
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
+
+				set_bit(wIndex, &bus_state->resuming_ports);
+				bus_state->resume_done[wIndex] = timeout;
+				mod_timer(&hcd->rh_timer, timeout);
+			}
+		/* Has resume been signalled for USB_RESUME_TIME yet? */
+		} else if (time_after_eq(jiffies,
+					 bus_state->resume_done[wIndex])) {
 			int time_left;
 
 			xhci_dbg(xhci, "Resume USB2 port %d\n",
@@ -775,13 +797,26 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 		} else {
 			/*
 			 * The resume has been signaling for less than
-			 * 20ms. Report the port status as SUSPEND,
-			 * let the usbcore check port status again
-			 * and clear resume signaling later.
+			 * USB_RESUME_TIME. Report the port status as SUSPEND,
+			 * let the usbcore check port status again and clear
+			 * resume signaling later.
 			 */
 			status |= USB_PORT_STAT_SUSPEND;
 		}
 	}
+	/*
+	 * Clear stale usb2 resume signalling variables in case port changed
+	 * state during resume signalling. For example on error
+	 */
+	if ((bus_state->resume_done[wIndex] ||
+	     test_bit(wIndex, &bus_state->resuming_ports)) &&
+	    (raw_port_status & PORT_PLS_MASK) != XDEV_U3 &&
+	    (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) {
+		bus_state->resume_done[wIndex] = 0;
+		clear_bit(wIndex, &bus_state->resuming_ports);
+	}
+
+
 	if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 &&
 	    (raw_port_status & PORT_POWER)) {
 		if (bus_state->suspended_ports & (1 << wIndex)) {
@@ -1115,6 +1150,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				if ((temp & PORT_PE) == 0)
 					goto error;
 
+				set_bit(wIndex, &bus_state->resuming_ports);
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_RESUME);
 				spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1122,6 +1158,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				spin_lock_irqsave(&xhci->lock, flags);
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_U0);
+				clear_bit(wIndex, &bus_state->resuming_ports);
 			}
 			bus_state->port_c_suspend |= 1 << wIndex;
 
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 17f6897acde2..c62109091d12 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -188,10 +188,14 @@ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
 		0xb7, 0x0c, 0x34, 0xac,	0x01, 0xe9, 0xbf, 0x45,
 		0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23,
 	};
-	acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL);
+	union acpi_object *obj;
+
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1,
+				NULL);
+	ACPI_FREE(obj);
 }
 #else
-	static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
 #endif /* CONFIG_ACPI */
 
 /* called during probe() after chip reset completes */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6c5e8133cf87..eeaa6c6bd540 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1583,7 +1583,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			 */
 			bogus_port_status = true;
 			goto cleanup;
-		} else {
+		} else if (!test_bit(faked_port_index,
+				     &bus_state->resuming_ports)) {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
 				msecs_to_jiffies(USB_RESUME_TIMEOUT);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index dfa44d3e8eee..3f912705dcef 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4778,8 +4778,16 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
 	slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
 	slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
+	/*
+	 * refer to section 6.2.2: MTT should be 0 for full speed hub,
+	 * but it may be already set to 1 when setup an xHCI virtual
+	 * device, so clear it anyway.
+	 */
 	if (tt->multi)
 		slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+	else if (hdev->speed == USB_SPEED_FULL)
+		slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT);
+
 	if (xhci->hci_version > 0x95) {
 		xhci_dbg(xhci, "xHCI version %x needs hub "
 				"TT think time and number of ports\n",
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 1f2037bbeb0d..45c83baf675d 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -159,7 +159,7 @@ config USB_TI_CPPI_DMA
 
 config USB_TI_CPPI41_DMA
 	bool 'TI CPPI 4.1 (AM335x)'
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP && DMADEVICES
 	select TI_CPPI41
 
 config USB_TUSB_OMAP_DMA
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 18cfc0a361cb..ee9ff7028b92 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2017,7 +2017,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	/* We need musb_read/write functions initialized for PM */
 	pm_runtime_use_autosuspend(musb->controller);
 	pm_runtime_set_autosuspend_delay(musb->controller, 200);
-	pm_runtime_irq_safe(musb->controller);
 	pm_runtime_enable(musb->controller);
 
 	/* The musb_platform_init() call:
@@ -2095,6 +2094,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 #ifndef CONFIG_MUSB_PIO_ONLY
 	if (!musb->ops->dma_init || !musb->ops->dma_exit) {
 		dev_err(dev, "DMA controller not set\n");
+		status = -ENODEV;
 		goto fail2;
 	}
 	musb_dma_controller_create = musb->ops->dma_init;
@@ -2218,6 +2218,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	pm_runtime_put(musb->controller);
 
+	/*
+	 * For why this is currently needed, see commit 3e43a0725637
+	 * ("usb: musb: core: add pm_runtime_irq_safe()")
+	 */
+	pm_runtime_irq_safe(musb->controller);
+
 	return 0;
 
 fail5:
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 80eb991c2506..0d19a6d61a71 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1506,7 +1506,6 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
 {
 	struct msm_otg_platform_data *pdata;
 	struct extcon_dev *ext_id, *ext_vbus;
-	const struct of_device_id *id;
 	struct device_node *node = pdev->dev.of_node;
 	struct property *prop;
 	int len, ret, words;
@@ -1518,8 +1517,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
 
 	motg->pdata = pdata;
 
-	id = of_match_device(msm_otg_dt_match, &pdev->dev);
-	pdata->phy_type = (enum msm_usb_phy_type) id->data;
+	pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev);
+	if (!pdata->phy_type)
+		return 1;
 
 	motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
 	if (IS_ERR(motg->link_rst))
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index b7536af777ab..c2936dc48ca7 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -143,12 +143,17 @@ static const struct mxs_phy_data imx6sx_phy_data = {
 	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
 };
 
+static const struct mxs_phy_data imx6ul_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
 static const struct of_device_id mxs_phy_dt_ids[] = {
 	{ .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
 	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
 	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
 	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
 	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
+	{ .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index de4f97d84a82..8f7a78e70975 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -131,7 +131,8 @@ static void __usbhsg_queue_pop(struct usbhsg_uep *uep,
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 
-	dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
+	if (pipe)
+		dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
 
 	ureq->req.status = status;
 	spin_unlock(usbhs_priv_to_lock(priv));
@@ -685,7 +686,13 @@ static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
 
-	usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq));
+	if (pipe)
+		usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq));
+
+	/*
+	 * To dequeue a request, this driver should call the usbhsg_queue_pop()
+	 * even if the pipe is NULL.
+	 */
 	usbhsg_queue_pop(uep, ureq, -ECONNRESET);
 
 	return 0;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index eac7ccaa3c85..7d4f51a32e66 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -132,7 +132,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
-	{ USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index f51a5d52c0ed..ec1b8f2c1183 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -531,7 +531,8 @@ static int ipaq_open(struct tty_struct *tty,
 	 * through. Since this has a reasonably high failure rate, we retry
 	 * several times.
 	 */
-	while (retries--) {
+	while (retries) {
+		retries--;
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
 				0x1, 0, NULL, 0, 100);
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index 3658662898fc..a204782ae530 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -53,6 +53,7 @@ DEVICE(funsoft, FUNSOFT_IDS);
 
 /* Infineon Flashloader driver */
 #define FLASHLOADER_IDS()		\
+	{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
 	{ USB_DEVICE(0x8087, 0x0716) }
 DEVICE(flashloader, FLASHLOADER_IDS);
 
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index e69151664436..5c66d3f7a6d0 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -796,6 +796,10 @@ static int uas_slave_configure(struct scsi_device *sdev)
 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
 		sdev->no_report_opcodes = 1;
 
+	/* A few buggy USB-ATA bridges don't understand FUA */
+	if (devinfo->flags & US_FL_BROKEN_FUA)
+		sdev->broken_fua = 1;
+
 	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
 	return 0;
 }
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6b2479123de7..7ffe4209067b 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1987,7 +1987,7 @@ UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Michael Büsch <m@bues.ch> */
-UNUSUAL_DEV(  0x152d, 0x0567, 0x0114, 0x0114,
+UNUSUAL_DEV(  0x152d, 0x0567, 0x0114, 0x0116,
 		"JMicron",
 		"USB to ATA/ATAPI Bridge",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index c85ea530085f..ccc113e83d88 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -132,7 +132,7 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
 		"JMicron",
 		"JMS567",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_NO_REPORT_OPCODES),
+		US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES),
 
 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
 UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,