Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

1 files changed, 142 insertions, 155 deletions

diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4bde4f9821ba..e1004fb37bd9 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -16,29 +16,115 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/assabet.h>
-#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
 #error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
 #endif
 
-extern int usb_disabled(void);
+#define USB_STATUS	0x0118
+#define USB_RESET	0x011c
+#define USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
 
-/*-------------------------------------------------------------------------*/
+#if 0
+static void dump_hci_status(struct usb_hcd *hcd, const char *label)
+{
+	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+
+	dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
+	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
+	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
+	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
+	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
+	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
+}
+#endif
 
-static void sa1111_start_hc(struct sa1111_dev *dev)
+static int ohci_sa1111_reset(struct usb_hcd *hcd)
 {
-	unsigned int usb_rst = 0;
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
 
-	printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
 
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		badge4_set_5V(BADGE4_5V_USB, 1);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
 	}
+	return ret;
+}
+
+static const struct hc_driver ohci_sa1111_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"SA-1111 OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_sa1111_reset,
+	.start =		ohci_sa1111_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
 #endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+static int sa1111_start_hc(struct sa1111_dev *dev)
+{
+	unsigned int usb_rst = 0;
+	int ret;
+
+	dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
 
 	if (machine_is_xp860() ||
 	    machine_has_neponset() ||
@@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 	 * host controller in reset.
 	 */
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Now, carefully enable the USB clock, and take
 	 * the USB host controller out of reset.
 	 */
-	sa1111_enable_device(dev);
-	udelay(11);
-	sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
+	ret = sa1111_enable_device(dev);
+	if (ret == 0) {
+		udelay(11);
+		sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+	}
+
+	return ret;
 }
 
 static void sa1111_stop_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst;
-	printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+
+	dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
 
 	/*
 	 * Put the USB host controller into reset.
 	 */
-	usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
+	usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Stop the USB clock.
 	 */
 	sa1111_disable_device(dev);
-
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		/* Disable power to the USB bus */
-		badge4_set_5V(BADGE4_5V_USB, 0);
-	}
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-#if 0
-static void dump_hci_status(struct usb_hcd *hcd, const char *label)
-{
-	unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
-
-	dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
-	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
-	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
-	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
-	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
-	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
 }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
 
 /**
- * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
- * Context: !in_interrupt()
+ * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
  *
  * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
+ * then invokes the start() method for the HCD associated with it.
  */
-int usb_hcd_sa1111_probe (const struct hc_driver *driver,
-			  struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd;
-	int retval;
+	int ret;
 
-	hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
 	if (!hcd)
 		return -ENOMEM;
+
 	hcd->rsrc_start = dev->res.start;
 	hcd->rsrc_len = resource_size(&dev->res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dbg("request_mem_region failed");
-		retval = -EBUSY;
+		ret = -EBUSY;
 		goto err1;
 	}
+
 	hcd->regs = dev->mapbase;
 
-	sa1111_start_hc(dev);
-	ohci_hcd_init(hcd_to_ohci(hcd));
+	ret = sa1111_start_hc(dev);
+	if (ret)
+		goto err2;
 
-	retval = usb_add_hcd(hcd, dev->irq[1], 0);
-	if (retval == 0)
-		return retval;
+	ret = usb_add_hcd(hcd, dev->irq[1], 0);
+	if (ret == 0)
+		return ret;
 
 	sa1111_stop_hc(dev);
+ err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
 	usb_put_hcd(hcd);
-	return retval;
+	return ret;
 }
 
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
 /**
- * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
+ * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
  * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_sa1111_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
  *
+ * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
+ * the HCD's stop() method.
  */
-void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
 {
+	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
 	usb_remove_hcd(hcd);
 	sa1111_stop_hc(dev);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
 
-static int __devinit
-ohci_sa1111_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
 	return 0;
 }
 
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_sa1111_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"SA-1111 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_sa1111_start,
-	.stop =			ohci_stop,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
-{
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
-	return ret;
-}
-
-static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
+static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 
-	usb_hcd_sa1111_remove(hcd, dev);
-	return 0;
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		hcd->driver->shutdown(hcd);
+		sa1111_stop_hc(dev);
+	}
 }
 
 static struct sa1111_driver ohci_hcd_sa1111_driver = {
 	.drv = {
 		.name	= "sa1111-ohci",
+		.owner	= THIS_MODULE,
 	},
 	.devid		= SA1111_DEVID_USB,
-	.probe		= ohci_hcd_sa1111_drv_probe,
-	.remove		= ohci_hcd_sa1111_drv_remove,
+	.probe		= ohci_hcd_sa1111_probe,
+	.remove		= ohci_hcd_sa1111_remove,
+	.shutdown	= ohci_hcd_sa1111_shutdown,
 };
-