diff options
| author | Mans Rullgard <mans@mansr.com> | 2019-01-24 13:48:39 +0000 |
|---|---|---|
| committer | Johan Hovold <johan@kernel.org> | 2019-01-25 10:35:04 +0100 |
| commit | a49e1abf07701600ad5ef990e56d676cbab91bf5 (patch) | |
| tree | 7d32e6637dbb62ae82a9b1afd02cd47e762f71f5 /drivers/usb/serial | |
| parent | 49a57857aeea06ca831043acbb0fa5e0f50602fd (diff) | |
| download | linux-a49e1abf07701600ad5ef990e56d676cbab91bf5.tar.gz | |
USB: serial: cp210x: support all gpios on CP2102N QFN28 package
The QFN28 package version of the CP2102N has three additional gpio pins. Add support for these. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Johan Hovold <johan@kernel.org>
Diffstat (limited to 'drivers/usb/serial')
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 19 |
1 files changed, 13 insertions, 6 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c0777a374a88..336a3c0f9f2c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -1574,12 +1574,6 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial) if (config_version != 0x01) return -ENOTSUPP; - /* - * We only support 4 GPIOs even on the QFN28 package, because - * config locations of GPIOs 4-6 determined using reverse - * engineering revealed conflicting offsets with other - * documented functions. So we'll just play it safe for now. - */ priv->gc.ngpio = 4; /* @@ -1594,6 +1588,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial) /* 0 indicates GPIO mode, 1 is alternate function */ priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) { + /* + * For the QFN28 package, GPIO4-6 are controlled by + * the low three bits of the mode/latch fields. + * Contrary to the document linked above, the bits for + * the SUSPEND pins are elsewhere. No alternate + * function is available for these pins. + */ + priv->gc.ngpio = 7; + gpio_latch |= (gpio_rst_latch & 7) << 4; + priv->gpio_pushpull |= (gpio_pushpull & 7) << 4; + } + /* * The CP2102N does not strictly has input and output pin modes, * it only knows open-drain and push-pull modes which is set at |