usb: phy: twl4030: use the new generic PHY framework

Used the generic PHY framework API to create the PHY. For powering on
and powering off the PHY, power_on and power_off ops are used. Once the
MUSB OMAP glue is adapted to the new framework, the suspend and resume
ops of usb phy library will be removed. Also twl4030-usb driver is moved
to drivers/phy/.

However using the old usb phy library cannot be completely removed
because otg is intertwined with phy and moving to the new
framework completely will break otg. Once we have a separate otg state machine,
we can get rid of the usb phy library.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 0 insertions, 805 deletions

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2ce041109993..64b8bef1919e 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -113,16 +113,6 @@ config SAMSUNG_USB3PHY
 	  Enable this to support Samsung USB 3.0 (Super Speed) phy controller
 	  for samsung SoCs.
 
-config TWL4030_USB
-	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
-	select USB_PHY
-	help
-	  Enable this to support the USB OTG transceiver on TWL4030
-	  family chips (including the TWL5030 and TPS659x0 devices).
-	  This transceiver supports high and full speed devices plus,
-	  in host mode, low speed.
-
 config TWL6030_USB
 	tristate "TWL6030 USB Transceiver Driver"
 	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index fa4db0e4bdb9..9c3736109c2c 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_OMAP_USB3)			+= phy-omap-usb3.o
 obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
 obj-$(CONFIG_SAMSUNG_USB2PHY)		+= phy-samsung-usb2.o
 obj-$(CONFIG_SAMSUNG_USB3PHY)		+= phy-samsung-usb3.o
-obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c
deleted file mode 100644
index 90730c8762b8..000000000000
--- a/drivers/usb/phy/phy-twl4030-usb.c
+++ /dev/null
@@ -1,794 +0,0 @@
-/*
- * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
- *
- * Copyright (C) 2004-2007 Texas Instruments
- * Copyright (C) 2008 Nokia Corporation
- * Contact: Felipe Balbi <felipe.balbi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Current status:
- *	- HS USB ULPI mode works.
- *	- 3-pin mode support may be added in future.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/musb-omap.h>
-#include <linux/usb/ulpi.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-/* Register defines */
-
-#define MCPC_CTRL			0x30
-#define MCPC_CTRL_RTSOL			(1 << 7)
-#define MCPC_CTRL_EXTSWR		(1 << 6)
-#define MCPC_CTRL_EXTSWC		(1 << 5)
-#define MCPC_CTRL_VOICESW		(1 << 4)
-#define MCPC_CTRL_OUT64K		(1 << 3)
-#define MCPC_CTRL_RTSCTSSW		(1 << 2)
-#define MCPC_CTRL_HS_UART		(1 << 0)
-
-#define MCPC_IO_CTRL			0x33
-#define MCPC_IO_CTRL_MICBIASEN		(1 << 5)
-#define MCPC_IO_CTRL_CTS_NPU		(1 << 4)
-#define MCPC_IO_CTRL_RXD_PU		(1 << 3)
-#define MCPC_IO_CTRL_TXDTYP		(1 << 2)
-#define MCPC_IO_CTRL_CTSTYP		(1 << 1)
-#define MCPC_IO_CTRL_RTSTYP		(1 << 0)
-
-#define MCPC_CTRL2			0x36
-#define MCPC_CTRL2_MCPC_CK_EN		(1 << 0)
-
-#define OTHER_FUNC_CTRL			0x80
-#define OTHER_FUNC_CTRL_BDIS_ACON_EN	(1 << 4)
-#define OTHER_FUNC_CTRL_FIVEWIRE_MODE	(1 << 2)
-
-#define OTHER_IFC_CTRL			0x83
-#define OTHER_IFC_CTRL_OE_INT_EN	(1 << 6)
-#define OTHER_IFC_CTRL_CEA2011_MODE	(1 << 5)
-#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN	(1 << 4)
-#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT	(1 << 3)
-#define OTHER_IFC_CTRL_HIZ_ULPI		(1 << 2)
-#define OTHER_IFC_CTRL_ALT_INT_REROUTE	(1 << 0)
-
-#define OTHER_INT_EN_RISE		0x86
-#define OTHER_INT_EN_FALL		0x89
-#define OTHER_INT_STS			0x8C
-#define OTHER_INT_LATCH			0x8D
-#define OTHER_INT_VB_SESS_VLD		(1 << 7)
-#define OTHER_INT_DM_HI			(1 << 6) /* not valid for "latch" reg */
-#define OTHER_INT_DP_HI			(1 << 5) /* not valid for "latch" reg */
-#define OTHER_INT_BDIS_ACON		(1 << 3) /* not valid for "fall" regs */
-#define OTHER_INT_MANU			(1 << 1)
-#define OTHER_INT_ABNORMAL_STRESS	(1 << 0)
-
-#define ID_STATUS			0x96
-#define ID_RES_FLOAT			(1 << 4)
-#define ID_RES_440K			(1 << 3)
-#define ID_RES_200K			(1 << 2)
-#define ID_RES_102K			(1 << 1)
-#define ID_RES_GND			(1 << 0)
-
-#define POWER_CTRL			0xAC
-#define POWER_CTRL_OTG_ENAB		(1 << 5)
-
-#define OTHER_IFC_CTRL2			0xAF
-#define OTHER_IFC_CTRL2_ULPI_STP_LOW	(1 << 4)
-#define OTHER_IFC_CTRL2_ULPI_TXEN_POL	(1 << 3)
-#define OTHER_IFC_CTRL2_ULPI_4PIN_2430	(1 << 2)
-#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK	(3 << 0) /* bits 0 and 1 */
-#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N	(0 << 0)
-#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N	(1 << 0)
-
-#define REG_CTRL_EN			0xB2
-#define REG_CTRL_ERROR			0xB5
-#define ULPI_I2C_CONFLICT_INTEN		(1 << 0)
-
-#define OTHER_FUNC_CTRL2		0xB8
-#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN	(1 << 0)
-
-/* following registers do not have separate _clr and _set registers */
-#define VBUS_DEBOUNCE			0xC0
-#define ID_DEBOUNCE			0xC1
-#define VBAT_TIMER			0xD3
-#define PHY_PWR_CTRL			0xFD
-#define PHY_PWR_PHYPWD			(1 << 0)
-#define PHY_CLK_CTRL			0xFE
-#define PHY_CLK_CTRL_CLOCKGATING_EN	(1 << 2)
-#define PHY_CLK_CTRL_CLK32K_EN		(1 << 1)
-#define REQ_PHY_DPLL_CLK		(1 << 0)
-#define PHY_CLK_CTRL_STS		0xFF
-#define PHY_DPLL_CLK			(1 << 0)
-
-/* In module TWL_MODULE_PM_MASTER */
-#define STS_HW_CONDITIONS		0x0F
-
-/* In module TWL_MODULE_PM_RECEIVER */
-#define VUSB_DEDICATED1			0x7D
-#define VUSB_DEDICATED2			0x7E
-#define VUSB1V5_DEV_GRP			0x71
-#define VUSB1V5_TYPE			0x72
-#define VUSB1V5_REMAP			0x73
-#define VUSB1V8_DEV_GRP			0x74
-#define VUSB1V8_TYPE			0x75
-#define VUSB1V8_REMAP			0x76
-#define VUSB3V1_DEV_GRP			0x77
-#define VUSB3V1_TYPE			0x78
-#define VUSB3V1_REMAP			0x79
-
-/* In module TWL4030_MODULE_INTBR */
-#define PMBR1				0x0D
-#define GPIO_USB_4PIN_ULPI_2430C	(3 << 0)
-
-struct twl4030_usb {
-	struct usb_phy		phy;
-	struct device		*dev;
-
-	/* TWL4030 internal USB regulator supplies */
-	struct regulator	*usb1v5;
-	struct regulator	*usb1v8;
-	struct regulator	*usb3v1;
-
-	/* for vbus reporting with irqs disabled */
-	spinlock_t		lock;
-
-	/* pin configuration */
-	enum twl4030_usb_mode	usb_mode;
-
-	int			irq;
-	enum omap_musb_vbus_id_status linkstat;
-	bool			vbus_supplied;
-	u8			asleep;
-	bool			irq_enabled;
-
-	struct delayed_work	id_workaround_work;
-};
-
-/* internal define on top of container_of */
-#define phy_to_twl(x)		container_of((x), struct twl4030_usb, phy)
-
-/*-------------------------------------------------------------------------*/
-
-static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
-		u8 module, u8 data, u8 address)
-{
-	u8 check;
-
-	if ((twl_i2c_write_u8(module, data, address) >= 0) &&
-	    (twl_i2c_read_u8(module, &check, address) >= 0) &&
-						(check == data))
-		return 0;
-	dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
-			1, module, address, check, data);
-
-	/* Failed once: Try again */
-	if ((twl_i2c_write_u8(module, data, address) >= 0) &&
-	    (twl_i2c_read_u8(module, &check, address) >= 0) &&
-						(check == data))
-		return 0;
-	dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
-			2, module, address, check, data);
-
-	/* Failed again: Return error */
-	return -EBUSY;
-}
-
-#define twl4030_usb_write_verify(twl, address, data)	\
-	twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
-
-static inline int twl4030_usb_write(struct twl4030_usb *twl,
-		u8 address, u8 data)
-{
-	int ret = 0;
-
-	ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
-	if (ret < 0)
-		dev_dbg(twl->dev,
-			"TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
-	return ret;
-}
-
-static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
-{
-	u8 data;
-	int ret = 0;
-
-	ret = twl_i2c_read_u8(module, &data, address);
-	if (ret >= 0)
-		ret = data;
-	else
-		dev_dbg(twl->dev,
-			"TWL4030:readb[0x%x,0x%x] Error %d\n",
-					module, address, ret);
-
-	return ret;
-}
-
-static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
-{
-	return twl4030_readb(twl, TWL_MODULE_USB, address);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline int
-twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
-{
-	return twl4030_usb_write(twl, ULPI_SET(reg), bits);
-}
-
-static inline int
-twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
-{
-	return twl4030_usb_write(twl, ULPI_CLR(reg), bits);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
-{
-	int ret;
-
-	ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS);
-	if (ret < 0 || !(ret & PHY_DPLL_CLK))
-		/*
-		 * if clocks are off, registers are not updated,
-		 * but we can assume we don't drive VBUS in this case
-		 */
-		return false;
-
-	ret = twl4030_usb_read(twl, ULPI_OTG_CTRL);
-	if (ret < 0)
-		return false;
-
-	return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
-}
-
-static enum omap_musb_vbus_id_status
-	twl4030_usb_linkstat(struct twl4030_usb *twl)
-{
-	int	status;
-	enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
-
-	twl->vbus_supplied = false;
-
-	/*
-	 * For ID/VBUS sensing, see manual section 15.4.8 ...
-	 * except when using only battery backup power, two
-	 * comparators produce VBUS_PRES and ID_PRES signals,
-	 * which don't match docs elsewhere.  But ... BIT(7)
-	 * and BIT(2) of STS_HW_CONDITIONS, respectively, do
-	 * seem to match up.  If either is true the USB_PRES
-	 * signal is active, the OTG module is activated, and
-	 * its interrupt may be raised (may wake the system).
-	 */
-	status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
-	if (status < 0)
-		dev_err(twl->dev, "USB link status err %d\n", status);
-	else if (status & (BIT(7) | BIT(2))) {
-		if (status & BIT(7)) {
-			if (twl4030_is_driving_vbus(twl))
-				status &= ~BIT(7);
-			else
-				twl->vbus_supplied = true;
-		}
-
-		if (status & BIT(2))
-			linkstat = OMAP_MUSB_ID_GROUND;
-		else if (status & BIT(7))
-			linkstat = OMAP_MUSB_VBUS_VALID;
-		else
-			linkstat = OMAP_MUSB_VBUS_OFF;
-	} else {
-		if (twl->linkstat != OMAP_MUSB_UNKNOWN)
-			linkstat = OMAP_MUSB_VBUS_OFF;
-	}
-
-	dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
-			status, status, linkstat);
-
-	/* REVISIT this assumes host and peripheral controllers
-	 * are registered, and that both are active...
-	 */
-
-	return linkstat;
-}
-
-static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
-{
-	twl->usb_mode = mode;
-
-	switch (mode) {
-	case T2_USB_MODE_ULPI:
-		twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL,
-					ULPI_IFC_CTRL_CARKITMODE);
-		twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
-		twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL,
-					ULPI_FUNC_CTRL_XCVRSEL_MASK |
-					ULPI_FUNC_CTRL_OPMODE_MASK);
-		break;
-	case -1:
-		/* FIXME: power on defaults */
-		break;
-	default:
-		dev_err(twl->dev, "unsupported T2 transceiver mode %d\n",
-				mode);
-		break;
-	};
-}
-
-static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
-{
-	unsigned long timeout;
-	int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
-
-	if (val >= 0) {
-		if (on) {
-			/* enable DPLL to access PHY registers over I2C */
-			val |= REQ_PHY_DPLL_CLK;
-			WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
-						(u8)val) < 0);
-
-			timeout = jiffies + HZ;
-			while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
-							PHY_DPLL_CLK)
-				&& time_before(jiffies, timeout))
-					udelay(10);
-			if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
-							PHY_DPLL_CLK))
-				dev_err(twl->dev, "Timeout setting T2 HSUSB "
-						"PHY DPLL clock\n");
-		} else {
-			/* let ULPI control the DPLL clock */
-			val &= ~REQ_PHY_DPLL_CLK;
-			WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
-						(u8)val) < 0);
-		}
-	}
-}
-
-static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
-{
-	u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
-
-	if (on)
-		pwr &= ~PHY_PWR_PHYPWD;
-	else
-		pwr |= PHY_PWR_PHYPWD;
-
-	WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
-}
-
-static void twl4030_phy_power(struct twl4030_usb *twl, int on)
-{
-	int ret;
-
-	if (on) {
-		ret = regulator_enable(twl->usb3v1);
-		if (ret)
-			dev_err(twl->dev, "Failed to enable usb3v1\n");
-
-		ret = regulator_enable(twl->usb1v8);
-		if (ret)
-			dev_err(twl->dev, "Failed to enable usb1v8\n");
-
-		/*
-		 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
-		 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
-		 * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
-		 * SLEEP. We work around this by clearing the bit after usv3v1
-		 * is re-activated. This ensures that VUSB3V1 is really active.
-		 */
-		twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
-
-		ret = regulator_enable(twl->usb1v5);
-		if (ret)
-			dev_err(twl->dev, "Failed to enable usb1v5\n");
-
-		__twl4030_phy_power(twl, 1);
-		twl4030_usb_write(twl, PHY_CLK_CTRL,
-				  twl4030_usb_read(twl, PHY_CLK_CTRL) |
-					(PHY_CLK_CTRL_CLOCKGATING_EN |
-						PHY_CLK_CTRL_CLK32K_EN));
-	} else {
-		__twl4030_phy_power(twl, 0);
-		regulator_disable(twl->usb1v5);
-		regulator_disable(twl->usb1v8);
-		regulator_disable(twl->usb3v1);
-	}
-}
-
-static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
-{
-	if (twl->asleep)
-		return;
-
-	twl4030_phy_power(twl, 0);
-	twl->asleep = 1;
-	dev_dbg(twl->dev, "%s\n", __func__);
-}
-
-static void __twl4030_phy_resume(struct twl4030_usb *twl)
-{
-	twl4030_phy_power(twl, 1);
-	twl4030_i2c_access(twl, 1);
-	twl4030_usb_set_mode(twl, twl->usb_mode);
-	if (twl->usb_mode == T2_USB_MODE_ULPI)
-		twl4030_i2c_access(twl, 0);
-}
-
-static void twl4030_phy_resume(struct twl4030_usb *twl)
-{
-	if (!twl->asleep)
-		return;
-	__twl4030_phy_resume(twl);
-	twl->asleep = 0;
-	dev_dbg(twl->dev, "%s\n", __func__);
-
-	/*
-	 * XXX When VBUS gets driven after musb goes to A mode,
-	 * ID_PRES related interrupts no longer arrive, why?
-	 * Register itself is updated fine though, so we must poll.
-	 */
-	if (twl->linkstat == OMAP_MUSB_ID_GROUND) {
-		cancel_delayed_work(&twl->id_workaround_work);
-		schedule_delayed_work(&twl->id_workaround_work, HZ);
-	}
-}
-
-static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
-{
-	/* Enable writing to power configuration registers */
-	twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
-			 TWL4030_PM_MASTER_PROTECT_KEY);
-
-	twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
-			 TWL4030_PM_MASTER_PROTECT_KEY);
-
-	/* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
-	/*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
-
-	/* input to VUSB3V1 LDO is from VBAT, not VBUS */
-	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
-
-	/* Initialize 3.1V regulator */
-	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
-
-	twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1");
-	if (IS_ERR(twl->usb3v1))
-		return -ENODEV;
-
-	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
-
-	/* Initialize 1.5V regulator */
-	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
-
-	twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5");
-	if (IS_ERR(twl->usb1v5))
-		return -ENODEV;
-
-	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
-
-	/* Initialize 1.8V regulator */
-	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
-
-	twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8");
-	if (IS_ERR(twl->usb1v8))
-		return -ENODEV;
-
-	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
-
-	/* disable access to power configuration registers */
-	twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
-			 TWL4030_PM_MASTER_PROTECT_KEY);
-
-	return 0;
-}
-
-static ssize_t twl4030_usb_vbus_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct twl4030_usb *twl = dev_get_drvdata(dev);
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	spin_lock_irqsave(&twl->lock, flags);
-	ret = sprintf(buf, "%s\n",
-			twl->vbus_supplied ? "on" : "off");
-	spin_unlock_irqrestore(&twl->lock, flags);
-
-	return ret;
-}
-static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
-
-static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
-{
-	struct twl4030_usb *twl = _twl;
-	enum omap_musb_vbus_id_status status;
-	bool status_changed = false;
-
-	status = twl4030_usb_linkstat(twl);
-
-	spin_lock_irq(&twl->lock);
-	if (status >= 0 && status != twl->linkstat) {
-		twl->linkstat = status;
-		status_changed = true;
-	}
-	spin_unlock_irq(&twl->lock);
-
-	if (status_changed) {
-		/* FIXME add a set_power() method so that B-devices can
-		 * configure the charger appropriately.  It's not always
-		 * correct to consume VBUS power, and how much current to
-		 * consume is a function of the USB configuration chosen
-		 * by the host.
-		 *
-		 * REVISIT usb_gadget_vbus_connect(...) as needed, ditto
-		 * its disconnect() sibling, when changing to/from the
-		 * USB_LINK_VBUS state.  musb_hdrc won't care until it
-		 * starts to handle softconnect right.
-		 */
-		omap_musb_mailbox(status);
-	}
-	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
-
-	return IRQ_HANDLED;
-}
-
-static void twl4030_id_workaround_work(struct work_struct *work)
-{
-	struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
-		id_workaround_work.work);
-	enum omap_musb_vbus_id_status status;
-	bool status_changed = false;
-
-	status = twl4030_usb_linkstat(twl);
-
-	spin_lock_irq(&twl->lock);
-	if (status >= 0 && status != twl->linkstat) {
-		twl->linkstat = status;
-		status_changed = true;
-	}
-	spin_unlock_irq(&twl->lock);
-
-	if (status_changed) {
-		dev_dbg(twl->dev, "handle missing status change to %d\n",
-				status);
-		omap_musb_mailbox(status);
-	}
-
-	/* don't schedule during sleep - irq works right then */
-	if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
-		cancel_delayed_work(&twl->id_workaround_work);
-		schedule_delayed_work(&twl->id_workaround_work, HZ);
-	}
-}
-
-static int twl4030_usb_phy_init(struct usb_phy *phy)
-{
-	struct twl4030_usb *twl = phy_to_twl(phy);
-	enum omap_musb_vbus_id_status status;
-
-	/*
-	 * Start in sleep state, we'll get called through set_suspend()
-	 * callback when musb is runtime resumed and it's time to start.
-	 */
-	__twl4030_phy_power(twl, 0);
-	twl->asleep = 1;
-
-	status = twl4030_usb_linkstat(twl);
-	twl->linkstat = status;
-
-	if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID)
-		omap_musb_mailbox(twl->linkstat);
-
-	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
-	return 0;
-}
-
-static int twl4030_set_suspend(struct usb_phy *x, int suspend)
-{
-	struct twl4030_usb *twl = phy_to_twl(x);
-
-	if (suspend)
-		twl4030_phy_suspend(twl, 1);
-	else
-		twl4030_phy_resume(twl);
-
-	return 0;
-}
-
-static int twl4030_set_peripheral(struct usb_otg *otg,
-					struct usb_gadget *gadget)
-{
-	if (!otg)
-		return -ENODEV;
-
-	otg->gadget = gadget;
-	if (!gadget)
-		otg->phy->state = OTG_STATE_UNDEFINED;
-
-	return 0;
-}
-
-static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	if (!otg)
-		return -ENODEV;
-
-	otg->host = host;
-	if (!host)
-		otg->phy->state = OTG_STATE_UNDEFINED;
-
-	return 0;
-}
-
-static int twl4030_usb_probe(struct platform_device *pdev)
-{
-	struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
-	struct twl4030_usb	*twl;
-	int			status, err;
-	struct usb_otg		*otg;
-	struct device_node	*np = pdev->dev.of_node;
-
-	twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
-	if (!twl)
-		return -ENOMEM;
-
-	if (np)
-		of_property_read_u32(np, "usb_mode",
-				(enum twl4030_usb_mode *)&twl->usb_mode);
-	else if (pdata)
-		twl->usb_mode = pdata->usb_mode;
-	else {
-		dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
-		return -EINVAL;
-	}
-
-	otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL);
-	if (!otg)
-		return -ENOMEM;
-
-	twl->dev		= &pdev->dev;
-	twl->irq		= platform_get_irq(pdev, 0);
-	twl->vbus_supplied	= false;
-	twl->asleep		= 1;
-	twl->linkstat		= OMAP_MUSB_UNKNOWN;
-
-	twl->phy.dev		= twl->dev;
-	twl->phy.label		= "twl4030";
-	twl->phy.otg		= otg;
-	twl->phy.type		= USB_PHY_TYPE_USB2;
-	twl->phy.set_suspend	= twl4030_set_suspend;
-	twl->phy.init		= twl4030_usb_phy_init;
-
-	otg->phy		= &twl->phy;
-	otg->set_host		= twl4030_set_host;
-	otg->set_peripheral	= twl4030_set_peripheral;
-
-	/* init spinlock for workqueue */
-	spin_lock_init(&twl->lock);
-
-	INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
-
-	err = twl4030_usb_ldo_init(twl);
-	if (err) {
-		dev_err(&pdev->dev, "ldo init failed\n");
-		return err;
-	}
-	usb_add_phy_dev(&twl->phy);
-
-	platform_set_drvdata(pdev, twl);
-	if (device_create_file(&pdev->dev, &dev_attr_vbus))
-		dev_warn(&pdev->dev, "could not create sysfs file\n");
-
-	/* Our job is to use irqs and status from the power module
-	 * to keep the transceiver disabled when nothing's connected.
-	 *
-	 * FIXME we actually shouldn't start enabling it until the
-	 * USB controller drivers have said they're ready, by calling
-	 * set_host() and/or set_peripheral() ... OTG_capable boards
-	 * need both handles, otherwise just one suffices.
-	 */
-	twl->irq_enabled = true;
-	status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
-			twl4030_usb_irq, IRQF_TRIGGER_FALLING |
-			IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
-	if (status < 0) {
-		dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
-			twl->irq, status);
-		return status;
-	}
-
-	dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
-	return 0;
-}
-
-static int twl4030_usb_remove(struct platform_device *pdev)
-{
-	struct twl4030_usb *twl = platform_get_drvdata(pdev);
-	int val;
-
-	cancel_delayed_work(&twl->id_workaround_work);
-	device_remove_file(twl->dev, &dev_attr_vbus);
-
-	/* set transceiver mode to power on defaults */
-	twl4030_usb_set_mode(twl, -1);
-
-	/* autogate 60MHz ULPI clock,
-	 * clear dpll clock request for i2c access,
-	 * disable 32KHz
-	 */
-	val = twl4030_usb_read(twl, PHY_CLK_CTRL);
-	if (val >= 0) {
-		val |= PHY_CLK_CTRL_CLOCKGATING_EN;
-		val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
-		twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
-	}
-
-	/* disable complete OTG block */
-	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
-
-	if (!twl->asleep)
-		twl4030_phy_power(twl, 0);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id twl4030_usb_id_table[] = {
-	{ .compatible = "ti,twl4030-usb" },
-	{}
-};
-MODULE_DEVICE_TABLE(of, twl4030_usb_id_table);
-#endif
-
-static struct platform_driver twl4030_usb_driver = {
-	.probe		= twl4030_usb_probe,
-	.remove		= twl4030_usb_remove,
-	.driver		= {
-		.name	= "twl4030_usb",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(twl4030_usb_id_table),
-	},
-};
-
-static int __init twl4030_usb_init(void)
-{
-	return platform_driver_register(&twl4030_usb_driver);
-}
-subsys_initcall(twl4030_usb_init);
-
-static void __exit twl4030_usb_exit(void)
-{
-	platform_driver_unregister(&twl4030_usb_driver);
-}
-module_exit(twl4030_usb_exit);
-
-MODULE_ALIAS("platform:twl4030_usb");
-MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
-MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
-MODULE_LICENSE("GPL");