Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 10 insertions, 41 deletions

diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2fc867652ef5..6b4c7d95853f 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -24,14 +24,12 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/prefetch.h>
-
-#include <asm/byteorder.h>
-#include <mach/hardware.h>
+#include <linux/byteorder/generic.h>
+#include <linux/platform_data/pxa2xx_udc.h>
 
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <mach/udc.h>
 
 #include "pxa27x_udc.h"
 
@@ -611,7 +609,7 @@ static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
  *
  * Find the physical pxa27x ep, and setup its UDCCR
  */
-static __init void pxa_ep_setup(struct pxa_ep *ep)
+static void pxa_ep_setup(struct pxa_ep *ep)
 {
 	u32 new_udccr;
 
@@ -633,7 +631,7 @@ static __init void pxa_ep_setup(struct pxa_ep *ep)
  *
  * Setup all pxa physical endpoints, except ep0
  */
-static __init void pxa_eps_setup(struct pxa_udc *dev)
+static void pxa_eps_setup(struct pxa_udc *dev)
 {
 	unsigned int i;
 
@@ -1718,7 +1716,7 @@ static void udc_disable(struct pxa_udc *udc)
  * Initializes gadget endpoint list, endpoints locks. No action is taken
  * on the hardware.
  */
-static __init void udc_init_data(struct pxa_udc *dev)
+static void udc_init_data(struct pxa_udc *dev)
 {
 	int i;
 	struct pxa_ep *ep;
@@ -1811,7 +1809,6 @@ static int pxa27x_udc_start(struct usb_gadget *g,
 
 	/* first hook up the driver ... */
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	dplus_pullup(udc, 1);
 
 	if (!IS_ERR_OR_NULL(udc->transceiver)) {
@@ -1829,7 +1826,6 @@ static int pxa27x_udc_start(struct usb_gadget *g,
 
 fail:
 	udc->driver = NULL;
-	udc->gadget.dev.driver = NULL;
 	return retval;
 }
 
@@ -1871,7 +1867,6 @@ static int pxa27x_udc_stop(struct usb_gadget *g,
 
 	udc->driver = NULL;
 
-
 	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return otg_set_peripheral(udc->transceiver->otg, NULL);
 	return 0;
@@ -2413,7 +2408,7 @@ static struct pxa_udc memory = {
  * Perform basic init : allocates udc clock, creates sysfs files, requests
  * irq.
  */
-static int __init pxa_udc_probe(struct platform_device *pdev)
+static int pxa_udc_probe(struct platform_device *pdev)
 {
 	struct resource *regs;
 	struct pxa_udc *udc = &memory;
@@ -2456,9 +2451,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 		goto err_map;
 	}
 
-	device_initialize(&udc->gadget.dev);
-	udc->gadget.dev.parent = &pdev->dev;
-	udc->gadget.dev.dma_mask = NULL;
 	udc->vbus_sensed = 0;
 
 	the_controller = udc;
@@ -2475,12 +2467,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
-	retval = device_add(&udc->gadget.dev);
-	if (retval) {
-		dev_err(udc->dev, "device_add error %d\n", retval);
-		goto err_dev_add;
-	}
-
 	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (retval)
 		goto err_add_udc;
@@ -2490,8 +2476,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_udc:
-	device_unregister(&udc->gadget.dev);
-err_dev_add:
 	free_irq(udc->irq, udc);
 err_irq:
 	iounmap(udc->regs);
@@ -2506,13 +2490,12 @@ err_clk:
  * pxa_udc_remove - removes the udc device driver
  * @_dev: platform device
  */
-static int __exit pxa_udc_remove(struct platform_device *_dev)
+static int pxa_udc_remove(struct platform_device *_dev)
 {
 	struct pxa_udc *udc = platform_get_drvdata(_dev);
 	int gpio = udc->mach->gpio_pullup;
 
 	usb_del_gadget_udc(&udc->gadget);
-	device_del(&udc->gadget.dev);
 	usb_gadget_unregister_driver(udc->driver);
 	free_irq(udc->irq, udc);
 	pxa_cleanup_debugfs(udc);
@@ -2625,7 +2608,8 @@ static struct platform_driver udc_driver = {
 		.name	= "pxa27x-udc",
 		.owner	= THIS_MODULE,
 	},
-	.remove		= __exit_p(pxa_udc_remove),
+	.probe		= pxa_udc_probe,
+	.remove		= pxa_udc_remove,
 	.shutdown	= pxa_udc_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= pxa_udc_suspend,
@@ -2633,22 +2617,7 @@ static struct platform_driver udc_driver = {
 #endif
 };
 
-static int __init udc_init(void)
-{
-	if (!cpu_is_pxa27x() && !cpu_is_pxa3xx())
-		return -ENODEV;
-
-	printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
-	return platform_driver_probe(&udc_driver, pxa_udc_probe);
-}
-module_init(udc_init);
-
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-module_exit(udc_exit);
+module_platform_driver(udc_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Robert Jarzmik");