Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Continued user-access cleanups in the futex code.

   - percpu-rwsem rewrite that uses its own waitqueue and atomic_t
     instead of an embedded rwsem. This addresses a couple of
     weaknesses, but the primary motivation was complications on the -rt
     kernel.

   - Introduce raw lock nesting detection on lockdep
     (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
     lock differences. This too originates from -rt.

   - Reuse lockdep zapped chain_hlocks entries, to conserve RAM
     footprint on distro-ish kernels running into the "BUG:
     MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
     chain-entries pool.

   - Misc cleanups, smaller fixes and enhancements - see the changelog
     for details"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
  fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
  thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
  Documentation/locking/locktypes: Minor copy editor fixes
  Documentation/locking/locktypes: Further clarifications and wordsmithing
  m68knommu: Remove mm.h include from uaccess_no.h
  x86: get rid of user_atomic_cmpxchg_inatomic()
  generic arch_futex_atomic_op_inuser() doesn't need access_ok()
  x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
  x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
  objtool: whitelist __sanitizer_cov_trace_switch()
  [parisc, s390, sparc64] no need for access_ok() in futex handling
  sh: no need of access_ok() in arch_futex_atomic_op_inuser()
  futex: arch_futex_atomic_op_inuser() calling conventions change
  completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
  lockdep: Add posixtimer context tracing bits
  lockdep: Annotate irq_work
  lockdep: Add hrtimer context tracing bits
  lockdep: Introduce wait-type checks
  completion: Use simple wait queues
  sched/swait: Prepare usage in completions
  ...

2 files changed, 13 insertions, 12 deletions

diff --git a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
index 7130e90773ed..a478cff8162a 100644
--- a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
+++ b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
@@ -19,6 +19,7 @@
 #include <linux/acpi.h>
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
+#include <linux/fs.h>
 #include "acpi_thermal_rel.h"
 
 static acpi_handle acpi_thermal_rel_handle;
diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c
index ddb4a973c698..e18758a8e911 100644
--- a/drivers/thermal/intel/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
@@ -63,7 +63,7 @@ static int max_id __read_mostly;
 /* Array of zone pointers */
 static struct zone_device **zones;
 /* Serializes interrupt notification, work and hotplug */
-static DEFINE_SPINLOCK(pkg_temp_lock);
+static DEFINE_RAW_SPINLOCK(pkg_temp_lock);
 /* Protects zone operation in the work function against hotplug removal */
 static DEFINE_MUTEX(thermal_zone_mutex);
 
@@ -266,12 +266,12 @@ static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work)
 	u64 msr_val, wr_val;
 
 	mutex_lock(&thermal_zone_mutex);
-	spin_lock_irq(&pkg_temp_lock);
+	raw_spin_lock_irq(&pkg_temp_lock);
 	++pkg_work_cnt;
 
 	zonedev = pkg_temp_thermal_get_dev(cpu);
 	if (!zonedev) {
-		spin_unlock_irq(&pkg_temp_lock);
+		raw_spin_unlock_irq(&pkg_temp_lock);
 		mutex_unlock(&thermal_zone_mutex);
 		return;
 	}
@@ -285,7 +285,7 @@ static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work)
 	}
 
 	enable_pkg_thres_interrupt();
-	spin_unlock_irq(&pkg_temp_lock);
+	raw_spin_unlock_irq(&pkg_temp_lock);
 
 	/*
 	 * If tzone is not NULL, then thermal_zone_mutex will prevent the
@@ -310,7 +310,7 @@ static int pkg_thermal_notify(u64 msr_val)
 	struct zone_device *zonedev;
 	unsigned long flags;
 
-	spin_lock_irqsave(&pkg_temp_lock, flags);
+	raw_spin_lock_irqsave(&pkg_temp_lock, flags);
 	++pkg_interrupt_cnt;
 
 	disable_pkg_thres_interrupt();
@@ -322,7 +322,7 @@ static int pkg_thermal_notify(u64 msr_val)
 		pkg_thermal_schedule_work(zonedev->cpu, &zonedev->work);
 	}
 
-	spin_unlock_irqrestore(&pkg_temp_lock, flags);
+	raw_spin_unlock_irqrestore(&pkg_temp_lock, flags);
 	return 0;
 }
 
@@ -368,9 +368,9 @@ static int pkg_temp_thermal_device_add(unsigned int cpu)
 	      zonedev->msr_pkg_therm_high);
 
 	cpumask_set_cpu(cpu, &zonedev->cpumask);
-	spin_lock_irq(&pkg_temp_lock);
+	raw_spin_lock_irq(&pkg_temp_lock);
 	zones[id] = zonedev;
-	spin_unlock_irq(&pkg_temp_lock);
+	raw_spin_unlock_irq(&pkg_temp_lock);
 	return 0;
 }
 
@@ -407,7 +407,7 @@ static int pkg_thermal_cpu_offline(unsigned int cpu)
 	}
 
 	/* Protect against work and interrupts */
-	spin_lock_irq(&pkg_temp_lock);
+	raw_spin_lock_irq(&pkg_temp_lock);
 
 	/*
 	 * Check whether this cpu was the current target and store the new
@@ -439,9 +439,9 @@ static int pkg_thermal_cpu_offline(unsigned int cpu)
 		 * To cancel the work we need to drop the lock, otherwise
 		 * we might deadlock if the work needs to be flushed.
 		 */
-		spin_unlock_irq(&pkg_temp_lock);
+		raw_spin_unlock_irq(&pkg_temp_lock);
 		cancel_delayed_work_sync(&zonedev->work);
-		spin_lock_irq(&pkg_temp_lock);
+		raw_spin_lock_irq(&pkg_temp_lock);
 		/*
 		 * If this is not the last cpu in the package and the work
 		 * did not run after we dropped the lock above, then we
@@ -452,7 +452,7 @@ static int pkg_thermal_cpu_offline(unsigned int cpu)
 			pkg_thermal_schedule_work(target, &zonedev->work);
 	}
 
-	spin_unlock_irq(&pkg_temp_lock);
+	raw_spin_unlock_irq(&pkg_temp_lock);
 
 	/* Final cleanup if this is the last cpu */
 	if (lastcpu)