Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...

8 files changed, 27 insertions, 133 deletions

diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 726ada9b8c79..abcad097ff2f 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -1,25 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial Attached SCSI (SAS) Discover process
  *
  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
- *
- * This file is licensed under GPLv2.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/scatterlist.h>
@@ -309,7 +293,7 @@ void sas_free_device(struct kref *kref)
 	dev->phy = NULL;
 
 	/* remove the phys and ports, everything else should be gone */
-	if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+	if (dev_is_expander(dev->dev_type))
 		kfree(dev->ex_dev.ex_phy);
 
 	if (dev_is_sata(dev) && dev->sata_dev.ap) {
@@ -519,8 +503,7 @@ static void sas_revalidate_domain(struct work_struct *work)
 	pr_debug("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
 		 task_pid_nr(current));
 
-	if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
-		     ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
+	if (ddev && dev_is_expander(ddev->dev_type))
 		res = sas_ex_revalidate_domain(ddev);
 
 	pr_debug("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
index b1e0f7d2b396..a1852f6c042b 100644
--- a/drivers/scsi/libsas/sas_event.c
+++ b/drivers/scsi/libsas/sas_event.c
@@ -1,25 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial Attached SCSI (SAS) Event processing
  *
  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
- *
- * This file is licensed under GPLv2.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/export.h>
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 9f7e2457360e..9fdb9c9fbda4 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial Attached SCSI (SAS) Expander discovery and configuration
  *
@@ -5,21 +6,6 @@
  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
  *
  * This file is licensed under GPLv2.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/scatterlist.h>
@@ -1106,7 +1092,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 				 SAS_ADDR(dev->sas_addr),
 				 phy_id);
 			sas_ex_disable_phy(dev, phy_id);
-			break;
+			return res;
 		} else
 			memcpy(dev->port->disc.fanout_sas_addr,
 			       ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
@@ -1118,27 +1104,9 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 		break;
 	}
 
-	if (child) {
-		int i;
-
-		for (i = 0; i < ex->num_phys; i++) {
-			if (ex->ex_phy[i].phy_state == PHY_VACANT ||
-			    ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
-				continue;
-			/*
-			 * Due to races, the phy might not get added to the
-			 * wide port, so we add the phy to the wide port here.
-			 */
-			if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
-			    SAS_ADDR(child->sas_addr)) {
-				ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
-				if (sas_ex_join_wide_port(dev, i))
-					pr_debug("Attaching ex phy%02d to wide port %016llx\n",
-						 i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
-			}
-		}
-	}
-
+	if (!child)
+		pr_notice("ex %016llx phy%02d failed to discover\n",
+			  SAS_ADDR(dev->sas_addr), phy_id);
 	return res;
 }
 
@@ -1154,8 +1122,7 @@ static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
 		    phy->phy_state == PHY_NOT_PRESENT)
 			continue;
 
-		if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE ||
-		     phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) &&
+		if (dev_is_expander(phy->attached_dev_type) &&
 		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
 
 			memcpy(sub_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
@@ -1173,8 +1140,7 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev)
 	u8 sub_addr[SAS_ADDR_SIZE] = {0, };
 
 	list_for_each_entry(child, &ex->children, siblings) {
-		if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
-		    child->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
+		if (!dev_is_expander(child->dev_type))
 			continue;
 		if (sub_addr[0] == 0) {
 			sas_find_sub_addr(child, sub_addr);
@@ -1259,8 +1225,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
 		    phy->phy_state == PHY_NOT_PRESENT)
 			continue;
 
-		if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
-		     phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) &&
+		if (dev_is_expander(phy->attached_dev_type) &&
 		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
 
 			if (!sub_sas_addr)
@@ -1356,8 +1321,7 @@ static int sas_check_parent_topology(struct domain_device *child)
 	if (!child->parent)
 		return 0;
 
-	if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
-	    child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
+	if (!dev_is_expander(child->parent->dev_type))
 		return 0;
 
 	parent_ex = &child->parent->ex_dev;
@@ -1653,8 +1617,7 @@ static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
 	struct domain_device *dev;
 
 	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
-		if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
-		    dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+		if (dev_is_expander(dev->dev_type)) {
 			struct sas_expander_device *ex =
 				rphy_to_expander_device(dev->rphy);
 
@@ -1886,7 +1849,7 @@ static int sas_find_bcast_dev(struct domain_device *dev,
 				SAS_ADDR(dev->sas_addr));
 	}
 	list_for_each_entry(ch, &ex->children, siblings) {
-		if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+		if (dev_is_expander(ch->dev_type)) {
 			res = sas_find_bcast_dev(ch, src_dev);
 			if (*src_dev)
 				return res;
@@ -1903,8 +1866,7 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi
 
 	list_for_each_entry_safe(child, n, &ex->children, siblings) {
 		set_bit(SAS_DEV_GONE, &child->state);
-		if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
-		    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+		if (dev_is_expander(child->dev_type))
 			sas_unregister_ex_tree(port, child);
 		else
 			sas_unregister_dev(port, child);
@@ -1924,8 +1886,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
 			if (SAS_ADDR(child->sas_addr) ==
 			    SAS_ADDR(phy->attached_sas_addr)) {
 				set_bit(SAS_DEV_GONE, &child->state);
-				if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
-				    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+				if (dev_is_expander(child->dev_type))
 					sas_unregister_ex_tree(parent->port, child);
 				else
 					sas_unregister_dev(parent->port, child);
@@ -1954,8 +1915,7 @@ static int sas_discover_bfs_by_root_level(struct domain_device *root,
 	int res = 0;
 
 	list_for_each_entry(child, &ex_root->children, siblings) {
-		if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
-		    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+		if (dev_is_expander(child->dev_type)) {
 			struct sas_expander_device *ex =
 				rphy_to_expander_device(child->rphy);
 
@@ -2008,8 +1968,7 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
 	list_for_each_entry(child, &dev->ex_dev.children, siblings) {
 		if (SAS_ADDR(child->sas_addr) ==
 		    SAS_ADDR(ex_phy->attached_sas_addr)) {
-			if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
-			    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+			if (dev_is_expander(child->dev_type))
 				res = sas_discover_bfs_by_root(child);
 			break;
 		}
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index d50810da53a9..21c43b18d5d5 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Serial Attached SCSI (SAS) Transport Layer initialization
  *
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 1f1e07e98477..01f1738ce6df 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Serial Attached SCSI (SAS) class internal header file
  *
diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c
index b71f5ac6c7dc..4ca4b1f30bd0 100644
--- a/drivers/scsi/libsas/sas_phy.c
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -1,25 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial Attached SCSI (SAS) Phy class
  *
  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
- *
- * This file is licensed under GPLv2.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include "sas_internal.h"
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 38a10478605c..7c86fd248129 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -1,25 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial Attached SCSI (SAS) Port class
  *
  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
- *
- * This file is licensed under GPLv2.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include "sas_internal.h"
@@ -70,7 +54,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
 			continue;
 		}
 
-		if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+		if (dev_is_expander(dev->dev_type)) {
 			dev->ex_dev.ex_change_count = -1;
 			for (i = 0; i < dev->ex_dev.num_phys; i++) {
 				struct ex_phy *phy = &dev->ex_dev.ex_phy[i];
@@ -195,7 +179,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 
 	sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
 	/* Only insert a revalidate event after initial discovery */
-	if (port_dev && sas_dev_type_is_expander(port_dev->dev_type)) {
+	if (port_dev && dev_is_expander(port_dev->dev_type)) {
 		struct expander_device *ex_dev = &port_dev->ex_dev;
 
 		ex_dev->ex_change_count = -1;
@@ -264,7 +248,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone)
 	spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
 
 	/* Only insert revalidate event if the port still has members */
-	if (port->port && dev && sas_dev_type_is_expander(dev->dev_type)) {
+	if (port->port && dev && dev_is_expander(dev->dev_type)) {
 		struct expander_device *ex_dev = &dev->ex_dev;
 
 		ex_dev->ex_change_count = -1;
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index ede0674d8399..4f339f939a51 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Serial Attached SCSI (SAS) class SCSI Host glue.
  *