Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...

23 files changed, 350 insertions, 540 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index df7a3843069d..34c8b6c7e095 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -240,6 +240,7 @@ config RTC_DRV_AS3722
 
 config RTC_DRV_DS1307
 	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for various compatible RTC
 	  chips (often with battery backup) connected with I2C. This driver
@@ -622,6 +623,7 @@ config RTC_DRV_RX8010
 
 config RTC_DRV_RX8581
 	tristate "Epson RX-8571/RX-8581"
+	select REGMAP_I2C
 	help
 	  If you say yes here you will get support for the Epson RX-8571/
 	  RX-8581.
@@ -649,6 +651,7 @@ config RTC_DRV_EM3027
 
 config RTC_DRV_RV3028
 	tristate "Micro Crystal RV3028"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Micro Crystal
 	  RV3028.
@@ -677,13 +680,14 @@ config RTC_DRV_S5M
 	  will be called rtc-s5m.
 
 config RTC_DRV_SD3078
-    tristate "ZXW Shenzhen whwave SD3078"
-    help
-      If you say yes here you get support for the ZXW Shenzhen whwave
-      SD3078 RTC chips.
+	tristate "ZXW Shenzhen whwave SD3078"
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the ZXW Shenzhen whwave
+	  SD3078 RTC chips.
 
-      This driver can also be built as a module. If so, the module
-      will be called rtc-sd3078
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-sd3078
 
 endif # I2C
 
@@ -849,14 +853,14 @@ config RTC_I2C_AND_SPI
 	default m if I2C=m
 	default y if I2C=y
 	default y if SPI_MASTER=y
-	select REGMAP_I2C if I2C
-	select REGMAP_SPI if SPI_MASTER
 
 comment "SPI and I2C RTC drivers"
 
 config RTC_DRV_DS3232
 	tristate "Dallas/Maxim DS3232/DS3234"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for Dallas Semiconductor
 	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
@@ -876,6 +880,8 @@ config RTC_DRV_DS3232_HWMON
 config RTC_DRV_PCF2127
 	tristate "NXP PCF2127"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	select WATCHDOG_CORE if WATCHDOG
 	help
 	  If you say yes here you get support for the NXP PCF2127/29 RTC
@@ -892,6 +898,8 @@ config RTC_DRV_PCF2127
 config RTC_DRV_RV3029C2
 	tristate "Micro Crystal RV3029/3049"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for the Micro Crystal
 	  RV3029 and RV3049 RTC chips.
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 73830670a41f..3521d8e8dc38 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -523,12 +523,9 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		if (status < 0)
 			return status;
 
-		tmp = !!(status & ABX8XX_STATUS_BLF);
+		tmp = status & ABX8XX_STATUS_BLF ? RTC_VL_BACKUP_LOW : 0;
 
-		if (copy_to_user((void __user *)arg, &tmp, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
+		return put_user(tmp, (unsigned int __user *)arg);
 
 	case RTC_VL_CLR:
 		status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c
index 10064bdabdff..3ab81cdec00b 100644
--- a/drivers/rtc/rtc-asm9260.c
+++ b/drivers/rtc/rtc-asm9260.c
@@ -264,6 +264,9 @@ static int asm9260_rtc_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->iobase);
 
 	priv->clk = devm_clk_get(dev, "ahb");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
 	ret = clk_prepare_enable(priv->clk);
 	if (ret) {
 		dev_err(dev, "Failed to enable clk!\n");
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 3b833e02a657..5e811e04cb21 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/bcd.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
@@ -30,7 +31,51 @@
 #include <linux/time.h>
 #include <linux/uaccess.h>
 
-#include "rtc-at91rm9200.h"
+#define	AT91_RTC_CR		0x00			/* Control Register */
+#define		AT91_RTC_UPDTIM		BIT(0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		BIT(1)		/* Update Request Calendar Register */
+
+#define	AT91_RTC_MR		0x04			/* Mode Register */
+
+#define	AT91_RTC_TIMR		0x08			/* Time Register */
+#define		AT91_RTC_SEC		GENMASK(6, 0)	/* Current Second */
+#define		AT91_RTC_MIN		GENMASK(14, 8)	/* Current Minute */
+#define		AT91_RTC_HOUR		GENMASK(21, 16)	/* Current Hour */
+#define		AT91_RTC_AMPM		BIT(22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		0x0c			/* Calendar Register */
+#define		AT91_RTC_CENT		GENMASK(6, 0)	/* Current Century */
+#define		AT91_RTC_YEAR		GENMASK(15, 8)	/* Current Year */
+#define		AT91_RTC_MONTH		GENMASK(20, 16)	/* Current Month */
+#define		AT91_RTC_DAY		GENMASK(23, 21)	/* Current Day */
+#define		AT91_RTC_DATE		GENMASK(29, 24)	/* Current Date */
+
+#define	AT91_RTC_TIMALR		0x10			/* Time Alarm Register */
+#define		AT91_RTC_SECEN		BIT(7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		BIT(15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		BIT(23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		0x14			/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		BIT(23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		BIT(31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		0x18			/* Status Register */
+#define		AT91_RTC_ACKUPD		BIT(0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		BIT(1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		BIT(2)		/* Second Event */
+#define		AT91_RTC_TIMEV		BIT(3)		/* Time Event */
+#define		AT91_RTC_CALEV		BIT(4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		0x1c			/* Status Clear Command Register */
+#define	AT91_RTC_IER		0x20			/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		0x24			/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		0x28			/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		0x2c			/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		BIT(0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		BIT(1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	BIT(2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	BIT(3)		/* Non valid Calendar Alarm */
 
 #define at91_rtc_read(field) \
 	readl_relaxed(at91_rtc_regs + field)
@@ -117,20 +162,20 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
 	} while ((time != at91_rtc_read(timereg)) ||
 			(date != at91_rtc_read(calreg)));
 
-	tm->tm_sec  = bcd2bin((time & AT91_RTC_SEC) >> 0);
-	tm->tm_min  = bcd2bin((time & AT91_RTC_MIN) >> 8);
-	tm->tm_hour = bcd2bin((time & AT91_RTC_HOUR) >> 16);
+	tm->tm_sec  = bcd2bin(FIELD_GET(AT91_RTC_SEC, time));
+	tm->tm_min  = bcd2bin(FIELD_GET(AT91_RTC_MIN, time));
+	tm->tm_hour = bcd2bin(FIELD_GET(AT91_RTC_HOUR, time));
 
 	/*
 	 * The Calendar Alarm register does not have a field for
 	 * the year - so these will return an invalid value.
 	 */
 	tm->tm_year  = bcd2bin(date & AT91_RTC_CENT) * 100;	/* century */
-	tm->tm_year += bcd2bin((date & AT91_RTC_YEAR) >> 8);	/* year */
+	tm->tm_year += bcd2bin(FIELD_GET(AT91_RTC_YEAR, date));	/* year */
 
-	tm->tm_wday = bcd2bin((date & AT91_RTC_DAY) >> 21) - 1;	/* day of the week [0-6], Sunday=0 */
-	tm->tm_mon  = bcd2bin((date & AT91_RTC_MONTH) >> 16) - 1;
-	tm->tm_mday = bcd2bin((date & AT91_RTC_DATE) >> 24);
+	tm->tm_wday = bcd2bin(FIELD_GET(AT91_RTC_DAY, date)) - 1;	/* day of the week [0-6], Sunday=0 */
+	tm->tm_mon  = bcd2bin(FIELD_GET(AT91_RTC_MONTH, date)) - 1;
+	tm->tm_mday = bcd2bin(FIELD_GET(AT91_RTC_DATE, date));
 }
 
 /*
@@ -167,16 +212,17 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
 	at91_rtc_write_idr(AT91_RTC_ACKUPD);
 
 	at91_rtc_write(AT91_RTC_TIMR,
-			  bin2bcd(tm->tm_sec) << 0
-			| bin2bcd(tm->tm_min) << 8
-			| bin2bcd(tm->tm_hour) << 16);
+			  FIELD_PREP(AT91_RTC_SEC, bin2bcd(tm->tm_sec))
+			| FIELD_PREP(AT91_RTC_MIN, bin2bcd(tm->tm_min))
+			| FIELD_PREP(AT91_RTC_HOUR, bin2bcd(tm->tm_hour)));
 
 	at91_rtc_write(AT91_RTC_CALR,
-			  bin2bcd((tm->tm_year + 1900) / 100)	/* century */
-			| bin2bcd(tm->tm_year % 100) << 8	/* year */
-			| bin2bcd(tm->tm_mon + 1) << 16		/* tm_mon starts at zero */
-			| bin2bcd(tm->tm_wday + 1) << 21	/* day of the week [0-6], Sunday=0 */
-			| bin2bcd(tm->tm_mday) << 24);
+			  FIELD_PREP(AT91_RTC_CENT,
+				     bin2bcd((tm->tm_year + 1900) / 100))
+			| FIELD_PREP(AT91_RTC_YEAR, bin2bcd(tm->tm_year % 100))
+			| FIELD_PREP(AT91_RTC_MONTH, bin2bcd(tm->tm_mon + 1))
+			| FIELD_PREP(AT91_RTC_DAY, bin2bcd(tm->tm_wday + 1))
+			| FIELD_PREP(AT91_RTC_DATE, bin2bcd(tm->tm_mday)));
 
 	/* Restart Time/Calendar */
 	cr = at91_rtc_read(AT91_RTC_CR);
@@ -211,25 +257,17 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
  */
 static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-	struct rtc_time tm;
-
-	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, &tm);
-
-	tm.tm_mon = alrm->time.tm_mon;
-	tm.tm_mday = alrm->time.tm_mday;
-	tm.tm_hour = alrm->time.tm_hour;
-	tm.tm_min = alrm->time.tm_min;
-	tm.tm_sec = alrm->time.tm_sec;
+	struct rtc_time tm = alrm->time;
 
 	at91_rtc_write_idr(AT91_RTC_ALARM);
 	at91_rtc_write(AT91_RTC_TIMALR,
-		  bin2bcd(tm.tm_sec) << 0
-		| bin2bcd(tm.tm_min) << 8
-		| bin2bcd(tm.tm_hour) << 16
+		  FIELD_PREP(AT91_RTC_SEC, bin2bcd(alrm->time.tm_sec))
+		| FIELD_PREP(AT91_RTC_MIN, bin2bcd(alrm->time.tm_min))
+		| FIELD_PREP(AT91_RTC_HOUR, bin2bcd(alrm->time.tm_hour))
 		| AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN);
 	at91_rtc_write(AT91_RTC_CALALR,
-		  bin2bcd(tm.tm_mon + 1) << 16		/* tm_mon starts at zero */
-		| bin2bcd(tm.tm_mday) << 24
+		  FIELD_PREP(AT91_RTC_MONTH, bin2bcd(alrm->time.tm_mon + 1))
+		| FIELD_PREP(AT91_RTC_DATE, bin2bcd(alrm->time.tm_mday))
 		| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
 
 	if (alrm->enabled) {
@@ -254,20 +292,6 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 
 	return 0;
 }
-/*
- * Provide additional RTC information in /proc/driver/rtc
- */
-static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
-{
-	unsigned long imr = at91_rtc_read_imr();
-
-	seq_printf(seq, "update_IRQ\t: %s\n",
-			(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
-	seq_printf(seq, "periodic_IRQ\t: %s\n",
-			(imr & AT91_RTC_SECEV) ? "yes" : "no");
-
-	return 0;
-}
 
 /*
  * IRQ handler for the RTC
@@ -327,6 +351,12 @@ static const struct of_device_id at91_rtc_dt_ids[] = {
 		.compatible = "atmel,at91sam9x5-rtc",
 		.data = &at91sam9x5_config,
 	}, {
+		.compatible = "atmel,sama5d4-rtc",
+		.data = &at91rm9200_config,
+	}, {
+		.compatible = "atmel,sama5d2-rtc",
+		.data = &at91rm9200_config,
+	}, {
 		/* sentinel */
 	}
 };
@@ -337,7 +367,6 @@ static const struct rtc_class_ops at91_rtc_ops = {
 	.set_time	= at91_rtc_settime,
 	.read_alarm	= at91_rtc_readalarm,
 	.set_alarm	= at91_rtc_setalarm,
-	.proc		= at91_rtc_proc,
 	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
 };
 
diff --git a/drivers/rtc/rtc-at91rm9200.h b/drivers/rtc/rtc-at91rm9200.h
deleted file mode 100644
index 8be5289da8e2..000000000000
--- a/drivers/rtc/rtc-at91rm9200.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-at91/include/mach/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define	AT91_RTC_CR		0x00			/* Control Register */
-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
-
-#define	AT91_RTC_MR		0x04			/* Mode Register */
-#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
-
-#define	AT91_RTC_TIMR		0x08			/* Time Register */
-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
-
-#define	AT91_RTC_CALR		0x0c			/* Calendar Register */
-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
-
-#define	AT91_RTC_TIMALR		0x10			/* Time Alarm Register */
-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
-
-#define	AT91_RTC_CALALR		0x14			/* Calendar Alarm Register */
-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
-
-#define	AT91_RTC_SR		0x18			/* Status Register */
-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
-
-#define	AT91_RTC_SCCR		0x1c			/* Status Clear Command Register */
-#define	AT91_RTC_IER		0x20			/* Interrupt Enable Register */
-#define	AT91_RTC_IDR		0x24			/* Interrupt Disable Register */
-#define	AT91_RTC_IMR		0x28			/* Interrupt Mask Register */
-
-#define	AT91_RTC_VER		0x2c			/* Valid Entry Register */
-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
-
-#endif
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 033303708c8b..b795fe4cbd2e 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -850,7 +850,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 			rtc_cmos_int_handler = cmos_interrupt;
 
 		retval = request_irq(rtc_irq, rtc_cmos_int_handler,
-				IRQF_SHARED, dev_name(&cmos_rtc.rtc->dev),
+				0, dev_name(&cmos_rtc.rtc->dev),
 				cmos_rtc.rtc);
 		if (retval < 0) {
 			dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
@@ -1197,8 +1197,6 @@ static void rtc_wake_off(struct device *dev)
 /* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */
 static void use_acpi_alarm_quirks(void)
 {
-	int year;
-
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
 		return;
 
@@ -1208,8 +1206,10 @@ static void use_acpi_alarm_quirks(void)
 	if (!is_hpet_enabled())
 		return;
 
-	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2015)
-		use_acpi_alarm = true;
+	if (dmi_get_bios_year() < 2015)
+		return;
+
+	use_acpi_alarm = true;
 }
 #else
 static inline void use_acpi_alarm_quirks(void) { }
@@ -1305,7 +1305,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 		 * hardcode it on systems with a legacy PIC.
 		 */
 		if (nr_legacy_irqs())
-			irq = 8;
+			irq = RTC_IRQ;
 #endif
 		return cmos_do_probe(&pnp->dev,
 				pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c
index d21004a68ee0..ba143423875b 100644
--- a/drivers/rtc/rtc-ds1343.c
+++ b/drivers/rtc/rtc-ds1343.c
@@ -75,7 +75,6 @@ static const struct spi_device_id ds1343_id[] = {
 MODULE_DEVICE_TABLE(spi, ds1343_id);
 
 struct ds1343_priv {
-	struct spi_device *spi;
 	struct rtc_device *rtc;
 	struct regmap *map;
 	int irq;
@@ -362,12 +361,13 @@ static int ds1343_probe(struct spi_device *spi)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->spi = spi;
-
 	/* RTC DS1347 works in spi mode 3 and
-	 * its chip select is active high
+	 * its chip select is active high. Active high should be defined as
+	 * "inverse polarity" as GPIO-based chip selects can be logically
+	 * active high but inverted by the GPIO library.
 	 */
-	spi->mode = SPI_MODE_3 | SPI_CS_HIGH;
+	spi->mode |= SPI_MODE_3;
+	spi->mode ^= SPI_CS_HIGH;
 	spi->bits_per_word = 8;
 	res = spi_setup(spi);
 	if (res)
diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index 443f6d05ce29..0fb79c4afb46 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -78,7 +78,6 @@
 struct hym8563 {
 	struct i2c_client	*client;
 	struct rtc_device	*rtc;
-	bool			valid;
 #ifdef CONFIG_COMMON_CLK
 	struct clk_hw		clkout_hw;
 #endif
@@ -91,19 +90,19 @@ struct hym8563 {
 static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct hym8563 *hym8563 = i2c_get_clientdata(client);
 	u8 buf[7];
 	int ret;
 
-	if (!hym8563->valid) {
-		dev_warn(&client->dev, "no valid clock/calendar values available\n");
-		return -EPERM;
-	}
-
 	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
 	if (ret < 0)
 		return ret;
 
+	if (buf[0] & HYM8563_SEC_VL) {
+		dev_warn(&client->dev,
+			 "no valid clock/calendar values available\n");
+		return -EINVAL;
+	}
+
 	tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
 	tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
 	tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK);
@@ -118,7 +117,6 @@ static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct hym8563 *hym8563 = i2c_get_clientdata(client);
 	u8 buf[7];
 	int ret;
 
@@ -157,8 +155,6 @@ static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	if (ret < 0)
 		return ret;
 
-	hym8563->valid = true;
-
 	return 0;
 }
 
@@ -556,9 +552,8 @@ static int hym8563_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	hym8563->valid = !(ret & HYM8563_SEC_VL);
 	dev_dbg(&client->dev, "rtc information is %s\n",
-		hym8563->valid ? "valid" : "invalid");
+		(ret & HYM8563_SEC_VL) ? "invalid" : "valid");
 
 	hym8563->rtc = devm_rtc_device_register(&client->dev, client->name,
 						&hym8563_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-moxart.c b/drivers/rtc/rtc-moxart.c
index 07b30a373a92..6b24ac9e1cfa 100644
--- a/drivers/rtc/rtc-moxart.c
+++ b/drivers/rtc/rtc-moxart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MOXA ART RTC driver.
  *
@@ -7,10 +8,6 @@
  *
  * Based on code from
  * Moxa Technology Co., Ltd. <www.moxa.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 9135e2101752..cda238dfe69b 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -297,15 +297,7 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 
 	rtc->rtc_dev->ops = &mtk_rtc_ops;
 
-	ret = rtc_register_device(rtc->rtc_dev);
-	if (ret)
-		goto out_free_irq;
-
-	return 0;
-
-out_free_irq:
-	free_irq(rtc->irq, rtc);
-	return ret;
+	return rtc_register_device(rtc->rtc_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 988a4dfcfaf8..d4ed20fb3194 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -616,7 +616,7 @@ static int rtc_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 	default:
 		return -ENOTSUPP;
-	};
+	}
 
 	*config = pinconf_to_config_packed(param, arg);
 
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index ba5baaca47be..4e50d6768f13 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -199,11 +199,9 @@ static int pcf2127_rtc_ioctl(struct device *dev,
 		if (ret)
 			return ret;
 
-		touser = touser & PCF2127_BIT_CTRL3_BLF ? 1 : 0;
+		touser = touser & PCF2127_BIT_CTRL3_BLF ? RTC_VL_BACKUP_LOW : 0;
 
-		if (copy_to_user((void __user *)arg, &touser, sizeof(int)))
-			return -EFAULT;
-		return 0;
+		return put_user(touser, (unsigned int __user *)arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 1afa6d9fa9fb..1db17ba1fc64 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -289,21 +289,9 @@ static int pcf85063_ioctl(struct device *dev, unsigned int cmd,
 		if (ret < 0)
 			return ret;
 
-		if (status & PCF85063_REG_SC_OS)
-			dev_warn(&pcf85063->rtc->dev, "Voltage low, data loss detected.\n");
+		status = status & PCF85063_REG_SC_OS ? RTC_VL_DATA_INVALID : 0;
 
-		status &= PCF85063_REG_SC_OS;
-
-		if (copy_to_user((void __user *)arg, &status, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
-
-	case RTC_VL_CLR:
-		ret = regmap_update_bits(pcf85063->regmap, PCF85063_REG_SC,
-					 PCF85063_REG_SC_OS, 0);
-
-		return ret;
+		return put_user(status, (unsigned int __user *)arg);
 
 	default:
 		return -ENOIOCTLCMD;
diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c
index b24c908f5f06..47e0f411dd5c 100644
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -282,11 +282,11 @@ static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
 		ret = pcf8523_voltage_low(client);
 		if (ret < 0)
 			return ret;
+		if (ret)
+			ret = RTC_VL_BACKUP_LOW;
 
-		if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
-			return -EFAULT;
+		return put_user(ret, (unsigned int __user *)arg);
 
-		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 3c322f3079b0..2dc30eafa639 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -22,8 +22,8 @@
 
 #define PCF8563_REG_ST1		0x00 /* status */
 #define PCF8563_REG_ST2		0x01
-#define PCF8563_BIT_AIE		(1 << 1)
-#define PCF8563_BIT_AF		(1 << 3)
+#define PCF8563_BIT_AIE		BIT(1)
+#define PCF8563_BIT_AF		BIT(3)
 #define PCF8563_BITS_ST2_N	(7 << 5)
 
 #define PCF8563_REG_SC		0x02 /* datetime */
@@ -76,7 +76,6 @@ struct pcf8563 {
 	 * 1970...2069.
 	 */
 	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
-	int voltage_low; /* incicates if a low_voltage was detected */
 
 	struct i2c_client *client;
 #ifdef CONFIG_COMMON_CLK
@@ -208,7 +207,6 @@ static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		return err;
 
 	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
-		pcf8563->voltage_low = 1;
 		dev_err(&client->dev,
 			"low voltage detected, date/time is not reliable.\n");
 		return -EINVAL;
@@ -276,43 +274,23 @@ static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 				9 - PCF8563_REG_SC, buf + PCF8563_REG_SC);
 }
 
-#ifdef CONFIG_RTC_INTF_DEV
 static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
-	struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev));
-	struct rtc_time tm;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		if (pcf8563->voltage_low)
-			dev_info(dev, "low voltage detected, date/time is not reliable.\n");
-
-		if (copy_to_user((void __user *)arg, &pcf8563->voltage_low,
-					sizeof(int)))
-			return -EFAULT;
-		return 0;
-	case RTC_VL_CLR:
-		/*
-		 * Clear the VL bit in the seconds register in case
-		 * the time has not been set already (which would
-		 * have cleared it). This does not really matter
-		 * because of the cached voltage_low value but do it
-		 * anyway for consistency.
-		 */
-		if (pcf8563_rtc_read_time(dev, &tm))
-			pcf8563_rtc_set_time(dev, &tm);
-
-		/* Clear the cached value. */
-		pcf8563->voltage_low = 0;
+		ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC);
+		if (ret < 0)
+			return ret;
 
-		return 0;
+		return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0,
+				(unsigned int __user *)arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
 }
-#else
-#define pcf8563_rtc_ioctl NULL
-#endif
 
 static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
 {
diff --git a/drivers/rtc/rtc-rv3028.c b/drivers/rtc/rtc-rv3028.c
index 6b7b3a69601a..a0ddc86c975a 100644
--- a/drivers/rtc/rtc-rv3028.c
+++ b/drivers/rtc/rtc-rv3028.c
@@ -428,21 +428,8 @@ static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		if (ret < 0)
 			return ret;
 
-		if (status & RV3028_STATUS_PORF)
-			dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n");
-
-		status &= RV3028_STATUS_PORF;
-
-		if (copy_to_user((void __user *)arg, &status, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
-
-	case RTC_VL_CLR:
-		ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
-					 RV3028_STATUS_PORF, 0);
-
-		return ret;
+		status = status & RV3028_STATUS_PORF ? RTC_VL_DATA_INVALID : 0;
+		return put_user(status, (unsigned int __user *)arg);
 
 	default:
 		return -ENOIOCTLCMD;
diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index 4cdf6588e1d9..62718231731b 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -109,10 +109,8 @@
 #define RV3029_CONTROL_E2P_TOV_MASK	0x3F /* XTAL turnover temp mask */
 
 /* user ram section */
-#define RV3029_USR1_RAM_PAGE		0x38
-#define RV3029_USR1_SECTION_LEN		0x04
-#define RV3029_USR2_RAM_PAGE		0x3C
-#define RV3029_USR2_SECTION_LEN		0x04
+#define RV3029_RAM_PAGE			0x38
+#define RV3029_RAM_SECTION_LEN		8
 
 struct rv3029_data {
 	struct device		*dev;
@@ -121,77 +119,13 @@ struct rv3029_data {
 	int irq;
 };
 
-static int rv3029_read_regs(struct device *dev, u8 reg, u8 *buf,
-			    unsigned int len)
-{
-	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
-
-	if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
-	    (reg + len > RV3029_USR1_RAM_PAGE + 8))
-		return -EINVAL;
-
-	return regmap_bulk_read(rv3029->regmap, reg, buf, len);
-}
-
-static int rv3029_write_regs(struct device *dev, u8 reg, u8 const buf[],
-			     unsigned int len)
-{
-	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
-
-	if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
-	    (reg + len > RV3029_USR1_RAM_PAGE + 8))
-		return -EINVAL;
-
-	return regmap_bulk_write(rv3029->regmap, reg, buf, len);
-}
-
-static int rv3029_update_bits(struct device *dev, u8 reg, u8 mask, u8 set)
-{
-	u8 buf;
-	int ret;
-
-	ret = rv3029_read_regs(dev, reg, &buf, 1);
-	if (ret < 0)
-		return ret;
-	buf &= ~mask;
-	buf |= set & mask;
-	ret = rv3029_write_regs(dev, reg, &buf, 1);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int rv3029_get_sr(struct device *dev, u8 *buf)
-{
-	int ret = rv3029_read_regs(dev, RV3029_STATUS, buf, 1);
-
-	if (ret < 0)
-		return -EIO;
-	dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]);
-	return 0;
-}
-
-static int rv3029_set_sr(struct device *dev, u8 val)
-{
-	u8 buf[1];
-	int sr;
-
-	buf[0] = val;
-	sr = rv3029_write_regs(dev, RV3029_STATUS, buf, 1);
-	dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]);
-	if (sr < 0)
-		return -EIO;
-	return 0;
-}
-
-static int rv3029_eeprom_busywait(struct device *dev)
+static int rv3029_eeprom_busywait(struct rv3029_data *rv3029)
 {
+	unsigned int sr;
 	int i, ret;
-	u8 sr;
 
 	for (i = 100; i > 0; i--) {
-		ret = rv3029_get_sr(dev, &sr);
+		ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
 		if (ret < 0)
 			break;
 		if (!(sr & RV3029_STATUS_EEBUSY))
@@ -199,126 +133,128 @@ static int rv3029_eeprom_busywait(struct device *dev)
 		usleep_range(1000, 10000);
 	}
 	if (i <= 0) {
-		dev_err(dev, "EEPROM busy wait timeout.\n");
+		dev_err(rv3029->dev, "EEPROM busy wait timeout.\n");
 		return -ETIMEDOUT;
 	}
 
 	return ret;
 }
 
-static int rv3029_eeprom_exit(struct device *dev)
+static int rv3029_eeprom_exit(struct rv3029_data *rv3029)
 {
 	/* Re-enable eeprom refresh */
-	return rv3029_update_bits(dev, RV3029_ONOFF_CTRL,
+	return regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
 				  RV3029_ONOFF_CTRL_EERE,
 				  RV3029_ONOFF_CTRL_EERE);
 }
 
-static int rv3029_eeprom_enter(struct device *dev)
+static int rv3029_eeprom_enter(struct rv3029_data *rv3029)
 {
+	unsigned int sr;
 	int ret;
-	u8 sr;
 
 	/* Check whether we are in the allowed voltage range. */
-	ret = rv3029_get_sr(dev, &sr);
+	ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
 	if (ret < 0)
 		return ret;
-	if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+	if (sr & RV3029_STATUS_VLOW2)
+		return -ENODEV;
+	if (sr & RV3029_STATUS_VLOW1) {
 		/* We clear the bits and retry once just in case
 		 * we had a brown out in early startup.
 		 */
-		sr &= ~RV3029_STATUS_VLOW1;
-		sr &= ~RV3029_STATUS_VLOW2;
-		ret = rv3029_set_sr(dev, sr);
+		ret = regmap_update_bits(rv3029->regmap, RV3029_STATUS,
+					 RV3029_STATUS_VLOW1, 0);
 		if (ret < 0)
 			return ret;
 		usleep_range(1000, 10000);
-		ret = rv3029_get_sr(dev, &sr);
+		ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
 		if (ret < 0)
 			return ret;
-		if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
-			dev_err(dev,
+		if (sr & RV3029_STATUS_VLOW1) {
+			dev_err(rv3029->dev,
 				"Supply voltage is too low to safely access the EEPROM.\n");
 			return -ENODEV;
 		}
 	}
 
 	/* Disable eeprom refresh. */
-	ret = rv3029_update_bits(dev, RV3029_ONOFF_CTRL, RV3029_ONOFF_CTRL_EERE,
-				 0);
+	ret = regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
+				 RV3029_ONOFF_CTRL_EERE, 0);
 	if (ret < 0)
 		return ret;
 
 	/* Wait for any previous eeprom accesses to finish. */
-	ret = rv3029_eeprom_busywait(dev);
+	ret = rv3029_eeprom_busywait(rv3029);
 	if (ret < 0)
-		rv3029_eeprom_exit(dev);
+		rv3029_eeprom_exit(rv3029);
 
 	return ret;
 }
 
-static int rv3029_eeprom_read(struct device *dev, u8 reg,
+static int rv3029_eeprom_read(struct rv3029_data *rv3029, u8 reg,
 			      u8 buf[], size_t len)
 {
 	int ret, err;
 
-	err = rv3029_eeprom_enter(dev);
+	err = rv3029_eeprom_enter(rv3029);
 	if (err < 0)
 		return err;
 
-	ret = rv3029_read_regs(dev, reg, buf, len);
+	ret = regmap_bulk_read(rv3029->regmap, reg, buf, len);
 
-	err = rv3029_eeprom_exit(dev);
+	err = rv3029_eeprom_exit(rv3029);
 	if (err < 0)
 		return err;
 
 	return ret;
 }
 
-static int rv3029_eeprom_write(struct device *dev, u8 reg,
+static int rv3029_eeprom_write(struct rv3029_data *rv3029, u8 reg,
 			       u8 const buf[], size_t len)
 {
+	unsigned int tmp;
 	int ret, err;
 	size_t i;
-	u8 tmp;
 
-	err = rv3029_eeprom_enter(dev);
+	err = rv3029_eeprom_enter(rv3029);
 	if (err < 0)
 		return err;
 
 	for (i = 0; i < len; i++, reg++) {
-		ret = rv3029_read_regs(dev, reg, &tmp, 1);
+		ret = regmap_read(rv3029->regmap, reg, &tmp);
 		if (ret < 0)
 			break;
 		if (tmp != buf[i]) {
-			ret = rv3029_write_regs(dev, reg, &buf[i], 1);
+			tmp = buf[i];
+			ret = regmap_write(rv3029->regmap, reg, tmp);
 			if (ret < 0)
 				break;
 		}
-		ret = rv3029_eeprom_busywait(dev);
+		ret = rv3029_eeprom_busywait(rv3029);
 		if (ret < 0)
 			break;
 	}
 
-	err = rv3029_eeprom_exit(dev);
+	err = rv3029_eeprom_exit(rv3029);
 	if (err < 0)
 		return err;
 
 	return ret;
 }
 
-static int rv3029_eeprom_update_bits(struct device *dev,
+static int rv3029_eeprom_update_bits(struct rv3029_data *rv3029,
 				     u8 reg, u8 mask, u8 set)
 {
 	u8 buf;
 	int ret;
 
-	ret = rv3029_eeprom_read(dev, reg, &buf, 1);
+	ret = rv3029_eeprom_read(rv3029, reg, &buf, 1);
 	if (ret < 0)
 		return ret;
 	buf &= ~mask;
 	buf |= set & mask;
-	ret = rv3029_eeprom_write(dev, reg, &buf, 1);
+	ret = rv3029_eeprom_write(rv3029, reg, &buf, 1);
 	if (ret < 0)
 		return ret;
 
@@ -330,20 +266,20 @@ static irqreturn_t rv3029_handle_irq(int irq, void *dev_id)
 	struct device *dev = dev_id;
 	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 	struct mutex *lock = &rv3029->rtc->ops_lock;
+	unsigned int flags, controls;
 	unsigned long events = 0;
-	u8 flags, controls;
 	int ret;
 
 	mutex_lock(lock);
 
-	ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
+	ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls);
 	if (ret) {
 		dev_warn(dev, "Read IRQ Control Register error %d\n", ret);
 		mutex_unlock(lock);
 		return IRQ_NONE;
 	}
 
-	ret = rv3029_read_regs(dev, RV3029_IRQ_FLAGS, &flags, 1);
+	ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags);
 	if (ret) {
 		dev_warn(dev, "Read IRQ Flags Register error %d\n", ret);
 		mutex_unlock(lock);
@@ -358,8 +294,8 @@ static irqreturn_t rv3029_handle_irq(int irq, void *dev_id)
 
 	if (events) {
 		rtc_update_irq(rv3029->rtc, 1, events);
-		rv3029_write_regs(dev, RV3029_IRQ_FLAGS, &flags, 1);
-		rv3029_write_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
+		regmap_write(rv3029->regmap, RV3029_IRQ_FLAGS, flags);
+		regmap_write(rv3029->regmap, RV3029_IRQ_CTRL, controls);
 	}
 	mutex_unlock(lock);
 
@@ -368,22 +304,22 @@ static irqreturn_t rv3029_handle_irq(int irq, void *dev_id)
 
 static int rv3029_read_time(struct device *dev, struct rtc_time *tm)
 {
-	u8 buf[1];
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+	unsigned int sr;
 	int ret;
 	u8 regs[RV3029_WATCH_SECTION_LEN] = { 0, };
 
-	ret = rv3029_get_sr(dev, buf);
-	if (ret < 0) {
-		dev_err(dev, "%s: reading SR failed\n", __func__);
-		return -EIO;
-	}
+	ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
+	if (ret < 0)
+		return ret;
+
+	if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON))
+		return -EINVAL;
 
-	ret = rv3029_read_regs(dev, RV3029_W_SEC, regs,
+	ret = regmap_bulk_read(rv3029->regmap, RV3029_W_SEC, regs,
 			       RV3029_WATCH_SECTION_LEN);
-	if (ret < 0) {
-		dev_err(dev, "%s: reading RTC section failed\n", __func__);
+	if (ret < 0)
 		return ret;
-	}
 
 	tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]);
 	tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]);
@@ -411,34 +347,24 @@ static int rv3029_read_time(struct device *dev, struct rtc_time *tm)
 
 static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 	struct rtc_time *const tm = &alarm->time;
+	unsigned int controls, flags;
 	int ret;
-	u8 regs[8], controls, flags;
-
-	ret = rv3029_get_sr(dev, regs);
-	if (ret < 0) {
-		dev_err(dev, "%s: reading SR failed\n", __func__);
-		return -EIO;
-	}
+	u8 regs[8];
 
-	ret = rv3029_read_regs(dev, RV3029_A_SC, regs,
+	ret = regmap_bulk_read(rv3029->regmap, RV3029_A_SC, regs,
 			       RV3029_ALARM_SECTION_LEN);
-
-	if (ret < 0) {
-		dev_err(dev, "%s: reading alarm section failed\n", __func__);
+	if (ret < 0)
 		return ret;
-	}
 
-	ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
-	if (ret) {
-		dev_err(dev, "Read IRQ Control Register error %d\n", ret);
+	ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls);
+	if (ret)
 		return ret;
-	}
-	ret = rv3029_read_regs(dev, RV3029_IRQ_FLAGS, &flags, 1);
-	if (ret < 0) {
-		dev_err(dev, "Read IRQ Flags Register error %d\n", ret);
+
+	ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags);
+	if (ret < 0)
 		return ret;
-	}
 
 	tm->tm_sec = bcd2bin(regs[RV3029_A_SC - RV3029_A_SC] & 0x7f);
 	tm->tm_min = bcd2bin(regs[RV3029_A_MN - RV3029_A_SC] & 0x7f);
@@ -456,50 +382,20 @@ static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 
 static int rv3029_alarm_irq_enable(struct device *dev, unsigned int enable)
 {
-	int ret;
-	u8 controls;
-
-	ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
-	if (ret < 0) {
-		dev_warn(dev, "Read IRQ Control Register error %d\n", ret);
-		return ret;
-	}
-
-	/* enable/disable AIE irq */
-	if (enable)
-		controls |= RV3029_IRQ_CTRL_AIE;
-	else
-		controls &= ~RV3029_IRQ_CTRL_AIE;
-
-	ret = rv3029_write_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
-	if (ret < 0) {
-		dev_err(dev, "can't update INT reg\n");
-		return ret;
-	}
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 
-	return 0;
+	return regmap_update_bits(rv3029->regmap, RV3029_IRQ_CTRL,
+				  RV3029_IRQ_CTRL_AIE,
+				  enable ? RV3029_IRQ_CTRL_AIE : 0);
 }
 
 static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 	struct rtc_time *const tm = &alarm->time;
 	int ret;
 	u8 regs[8];
 
-	/*
-	 * The clock has an 8 bit wide bcd-coded register (they never learn)
-	 * for the year. tm_year is an offset from 1900 and we are interested
-	 * in the 2000-2099 range, so any value less than 100 is invalid.
-	*/
-	if (tm->tm_year < 100)
-		return -EINVAL;
-
-	ret = rv3029_get_sr(dev, regs);
-	if (ret < 0) {
-		dev_err(dev, "%s: reading SR failed\n", __func__);
-		return -EIO;
-	}
-
 	/* Activate all the alarms with AE_x bit */
 	regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec) | RV3029_A_AE_X;
 	regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min) | RV3029_A_AE_X;
@@ -515,39 +411,20 @@ static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 		| RV3029_A_AE_X;
 
 	/* Write the alarm */
-	ret = rv3029_write_regs(dev, RV3029_A_SC, regs,
+	ret = regmap_bulk_write(rv3029->regmap, RV3029_A_SC, regs,
 				RV3029_ALARM_SECTION_LEN);
 	if (ret < 0)
 		return ret;
 
-	if (alarm->enabled) {
-		/* enable AIE irq */
-		ret = rv3029_alarm_irq_enable(dev, 1);
-		if (ret)
-			return ret;
-	} else {
-		/* disable AIE irq */
-		ret = rv3029_alarm_irq_enable(dev, 0);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
+	return rv3029_alarm_irq_enable(dev, alarm->enabled);
 }
 
 static int rv3029_set_time(struct device *dev, struct rtc_time *tm)
 {
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 	u8 regs[8];
 	int ret;
 
-	/*
-	 * The clock has an 8 bit wide bcd-coded register (they never learn)
-	 * for the year. tm_year is an offset from 1900 and we are interested
-	 * in the 2000-2099 range, so any value less than 100 is invalid.
-	*/
-	if (tm->tm_year < 100)
-		return -EINVAL;
-
 	regs[RV3029_W_SEC - RV3029_W_SEC] = bin2bcd(tm->tm_sec);
 	regs[RV3029_W_MINUTES - RV3029_W_SEC] = bin2bcd(tm->tm_min);
 	regs[RV3029_W_HOURS - RV3029_W_SEC] = bin2bcd(tm->tm_hour);
@@ -556,24 +433,55 @@ static int rv3029_set_time(struct device *dev, struct rtc_time *tm)
 	regs[RV3029_W_DAYS - RV3029_W_SEC] = bin2bcd(tm->tm_wday + 1) & 0x7;
 	regs[RV3029_W_YEARS - RV3029_W_SEC] = bin2bcd(tm->tm_year - 100);
 
-	ret = rv3029_write_regs(dev, RV3029_W_SEC, regs,
+	ret = regmap_bulk_write(rv3029->regmap, RV3029_W_SEC, regs,
 				RV3029_WATCH_SECTION_LEN);
 	if (ret < 0)
 		return ret;
 
-	ret = rv3029_get_sr(dev, regs);
-	if (ret < 0) {
-		dev_err(dev, "%s: reading SR failed\n", __func__);
-		return ret;
-	}
-	/* clear PON bit */
-	ret = rv3029_set_sr(dev, (regs[0] & ~RV3029_STATUS_PON));
-	if (ret < 0) {
-		dev_err(dev, "%s: reading SR failed\n", __func__);
-		return ret;
+	/* clear PON and VLOW2 bits */
+	return regmap_update_bits(rv3029->regmap, RV3029_STATUS,
+				  RV3029_STATUS_PON | RV3029_STATUS_VLOW2, 0);
+}
+
+static int rv3029_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+	unsigned long vl = 0;
+	int sr, ret = 0;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
+		if (ret < 0)
+			return ret;
+
+		if (sr & RV3029_STATUS_VLOW1)
+			vl = RTC_VL_ACCURACY_LOW;
+
+		if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON))
+			vl |= RTC_VL_DATA_INVALID;
+
+		return put_user(vl, (unsigned int __user *)arg);
+
+	case RTC_VL_CLR:
+		return regmap_update_bits(rv3029->regmap, RV3029_STATUS,
+					  RV3029_STATUS_VLOW1, 0);
+
+	default:
+		return -ENOIOCTLCMD;
 	}
+}
 
-	return 0;
+static int rv3029_nvram_write(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	return regmap_bulk_write(priv, RV3029_RAM_PAGE + offset, val, bytes);
+}
+
+static int rv3029_nvram_read(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	return regmap_bulk_read(priv, RV3029_RAM_PAGE + offset, val, bytes);
 }
 
 static const struct rv3029_trickle_tab_elem {
@@ -635,6 +543,7 @@ static const struct rv3029_trickle_tab_elem {
 
 static void rv3029_trickle_config(struct device *dev)
 {
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 	struct device_node *of_node = dev->of_node;
 	const struct rv3029_trickle_tab_elem *elem;
 	int i, err;
@@ -661,7 +570,7 @@ static void rv3029_trickle_config(struct device *dev)
 			 "Trickle charger enabled at %d ohms resistance.\n",
 			 elem->r);
 	}
-	err = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL,
+	err = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL,
 					RV3029_TRICKLE_MASK,
 					trickle_set_bits);
 	if (err < 0)
@@ -670,12 +579,12 @@ static void rv3029_trickle_config(struct device *dev)
 
 #ifdef CONFIG_RTC_DRV_RV3029_HWMON
 
-static int rv3029_read_temp(struct device *dev, int *temp_mC)
+static int rv3029_read_temp(struct rv3029_data *rv3029, int *temp_mC)
 {
+	unsigned int temp;
 	int ret;
-	u8 temp;
 
-	ret = rv3029_read_regs(dev, RV3029_TEMP_PAGE, &temp, 1);
+	ret = regmap_read(rv3029->regmap, RV3029_TEMP_PAGE, &temp);
 	if (ret < 0)
 		return ret;
 
@@ -688,9 +597,10 @@ static ssize_t rv3029_hwmon_show_temp(struct device *dev,
 				      struct device_attribute *attr,
 				      char *buf)
 {
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 	int ret, temp_mC;
 
-	ret = rv3029_read_temp(dev, &temp_mC);
+	ret = rv3029_read_temp(rv3029, &temp_mC);
 	if (ret < 0)
 		return ret;
 
@@ -702,9 +612,10 @@ static ssize_t rv3029_hwmon_set_update_interval(struct device *dev,
 						const char *buf,
 						size_t count)
 {
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+	unsigned int th_set_bits = 0;
 	unsigned long interval_ms;
 	int ret;
-	u8 th_set_bits = 0;
 
 	ret = kstrtoul(buf, 10, &interval_ms);
 	if (ret < 0)
@@ -715,7 +626,7 @@ static ssize_t rv3029_hwmon_set_update_interval(struct device *dev,
 		if (interval_ms >= 16000)
 			th_set_bits |= RV3029_EECTRL_THP;
 	}
-	ret = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL,
+	ret = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL,
 					RV3029_EECTRL_THE | RV3029_EECTRL_THP,
 					th_set_bits);
 	if (ret < 0)
@@ -728,10 +639,11 @@ static ssize_t rv3029_hwmon_show_update_interval(struct device *dev,
 						 struct device_attribute *attr,
 						 char *buf)
 {
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
 	int ret, interval_ms;
 	u8 eectrl;
 
-	ret = rv3029_eeprom_read(dev, RV3029_CONTROL_E2P_EECTRL,
+	ret = rv3029_eeprom_read(rv3029, RV3029_CONTROL_E2P_EECTRL,
 				 &eectrl, 1);
 	if (ret < 0)
 		return ret;
@@ -785,14 +697,23 @@ static void rv3029_hwmon_register(struct device *dev, const char *name)
 static struct rtc_class_ops rv3029_rtc_ops = {
 	.read_time	= rv3029_read_time,
 	.set_time	= rv3029_set_time,
+	.ioctl		= rv3029_ioctl,
 };
 
 static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq,
 			const char *name)
 {
 	struct rv3029_data *rv3029;
+	struct nvmem_config nvmem_cfg = {
+		.name = "rv3029_nvram",
+		.word_size = 1,
+		.stride = 1,
+		.size = RV3029_RAM_SECTION_LEN,
+		.type = NVMEM_TYPE_BATTERY_BACKED,
+		.reg_read = rv3029_nvram_read,
+		.reg_write = rv3029_nvram_write,
+	};
 	int rc = 0;
-	u8 buf[1];
 
 	rv3029 = devm_kzalloc(dev, sizeof(*rv3029), GFP_KERNEL);
 	if (!rv3029)
@@ -803,21 +724,12 @@ static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq,
 	rv3029->dev = dev;
 	dev_set_drvdata(dev, rv3029);
 
-	rc = rv3029_get_sr(dev, buf);
-	if (rc < 0) {
-		dev_err(dev, "reading status failed\n");
-		return rc;
-	}
-
 	rv3029_trickle_config(dev);
 	rv3029_hwmon_register(dev, name);
 
-	rv3029->rtc = devm_rtc_device_register(dev, name, &rv3029_rtc_ops,
-					       THIS_MODULE);
-	if (IS_ERR(rv3029->rtc)) {
-		dev_err(dev, "unable to register the class device\n");
+	rv3029->rtc = devm_rtc_allocate_device(dev);
+	if (IS_ERR(rv3029->rtc))
 		return PTR_ERR(rv3029->rtc);
-	}
 
 	if (rv3029->irq > 0) {
 		rc = devm_request_threaded_irq(dev, rv3029->irq,
@@ -834,20 +746,48 @@ static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq,
 		}
 	}
 
+	rv3029->rtc->ops = &rv3029_rtc_ops;
+	rv3029->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rv3029->rtc->range_max = RTC_TIMESTAMP_END_2079;
+
+	rc = rtc_register_device(rv3029->rtc);
+	if (rc)
+		return rc;
+
+	nvmem_cfg.priv = rv3029->regmap;
+	rtc_nvmem_register(rv3029->rtc, &nvmem_cfg);
+
 	return 0;
 }
 
+static const struct regmap_range rv3029_holes_range[] = {
+	regmap_reg_range(0x05, 0x07),
+	regmap_reg_range(0x0f, 0x0f),
+	regmap_reg_range(0x17, 0x17),
+	regmap_reg_range(0x1a, 0x1f),
+	regmap_reg_range(0x21, 0x27),
+	regmap_reg_range(0x34, 0x37),
+};
+
+static const struct regmap_access_table rv3029_regs = {
+	.no_ranges =	rv3029_holes_range,
+	.n_no_ranges =	ARRAY_SIZE(rv3029_holes_range),
+};
+
+static const struct regmap_config config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.rd_table = &rv3029_regs,
+	.wr_table = &rv3029_regs,
+	.max_register = 0x3f,
+};
+
 #if IS_ENABLED(CONFIG_I2C)
 
 static int rv3029_i2c_probe(struct i2c_client *client,
 			    const struct i2c_device_id *id)
 {
 	struct regmap *regmap;
-	static const struct regmap_config config = {
-		.reg_bits = 8,
-		.val_bits = 8,
-	};
-
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
 				     I2C_FUNC_SMBUS_BYTE)) {
 		dev_err(&client->dev, "Adapter does not support SMBUS_I2C_BLOCK or SMBUS_I2C_BYTE\n");
@@ -855,11 +795,8 @@ static int rv3029_i2c_probe(struct i2c_client *client,
 	}
 
 	regmap = devm_regmap_init_i2c(client, &config);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
-			__func__, PTR_ERR(regmap));
+	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
-	}
 
 	return rv3029_probe(&client->dev, regmap, client->irq, client->name);
 }
@@ -873,24 +810,20 @@ MODULE_DEVICE_TABLE(i2c, rv3029_id);
 
 static const struct of_device_id rv3029_of_match[] = {
 	{ .compatible = "microcrystal,rv3029" },
-	/* Backward compatibility only, do not use compatibles below: */
-	{ .compatible = "rv3029" },
-	{ .compatible = "rv3029c2" },
-	{ .compatible = "mc,rv3029c2" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rv3029_of_match);
 
 static struct i2c_driver rv3029_driver = {
 	.driver = {
-		.name = "rtc-rv3029c2",
+		.name = "rv3029",
 		.of_match_table = of_match_ptr(rv3029_of_match),
 	},
 	.probe		= rv3029_i2c_probe,
 	.id_table	= rv3029_id,
 };
 
-static int rv3029_register_driver(void)
+static int __init rv3029_register_driver(void)
 {
 	return i2c_add_driver(&rv3029_driver);
 }
@@ -902,7 +835,7 @@ static void rv3029_unregister_driver(void)
 
 #else
 
-static int rv3029_register_driver(void)
+static int __init rv3029_register_driver(void)
 {
 	return 0;
 }
@@ -917,18 +850,11 @@ static void rv3029_unregister_driver(void)
 
 static int rv3049_probe(struct spi_device *spi)
 {
-	static const struct regmap_config config = {
-		.reg_bits = 8,
-		.val_bits = 8,
-	};
 	struct regmap *regmap;
 
 	regmap = devm_regmap_init_spi(spi, &config);
-	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
-			__func__, PTR_ERR(regmap));
+	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
-	}
 
 	return rv3029_probe(&spi->dev, regmap, spi->irq, "rv3049");
 }
@@ -940,24 +866,24 @@ static struct spi_driver rv3049_driver = {
 	.probe   = rv3049_probe,
 };
 
-static int rv3049_register_driver(void)
+static int __init rv3049_register_driver(void)
 {
 	return spi_register_driver(&rv3049_driver);
 }
 
-static void rv3049_unregister_driver(void)
+static void __exit rv3049_unregister_driver(void)
 {
 	spi_unregister_driver(&rv3049_driver);
 }
 
 #else
 
-static int rv3049_register_driver(void)
+static int __init rv3049_register_driver(void)
 {
 	return 0;
 }
 
-static void rv3049_unregister_driver(void)
+static void __exit rv3049_unregister_driver(void)
 {
 }
 
@@ -968,16 +894,12 @@ static int __init rv30x9_init(void)
 	int ret;
 
 	ret = rv3029_register_driver();
-	if (ret) {
-		pr_err("Failed to register rv3029 driver: %d\n", ret);
+	if (ret)
 		return ret;
-	}
 
 	ret = rv3049_register_driver();
-	if (ret) {
-		pr_err("Failed to register rv3049 driver: %d\n", ret);
+	if (ret)
 		rv3029_unregister_driver();
-	}
 
 	return ret;
 }
diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 4960f0a2b249..93c3a6b627bd 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -411,6 +411,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+	unsigned int vl = 0;
 	int flags, ret = 0;
 
 	switch (cmd) {
@@ -419,18 +420,15 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		if (flags < 0)
 			return flags;
 
-		if (flags & RV8803_FLAG_V1F)
+		if (flags & RV8803_FLAG_V1F) {
 			dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n");
+			vl = RTC_VL_ACCURACY_LOW;
+		}
 
 		if (flags & RV8803_FLAG_V2F)
-			dev_warn(&client->dev, "Voltage low, data loss detected.\n");
-
-		flags &= RV8803_FLAG_V1F | RV8803_FLAG_V2F;
+			vl |= RTC_VL_DATA_INVALID;
 
-		if (copy_to_user((void __user *)arg, &flags, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
+		return put_user(vl, (unsigned int __user *)arg);
 
 	case RTC_VL_CLR:
 		mutex_lock(&rv8803->flags_lock);
@@ -440,7 +438,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 			return flags;
 		}
 
-		flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F);
+		flags &= ~RV8803_FLAG_V1F;
 		ret = rv8803_write_reg(client, RV8803_FLAG, flags);
 		mutex_unlock(&rv8803->flags_lock);
 		if (ret)
diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c
index 8102469e27c0..fe010151ec8f 100644
--- a/drivers/rtc/rtc-rx8010.c
+++ b/drivers/rtc/rtc-rx8010.c
@@ -389,9 +389,8 @@ static int rx8010_alarm_irq_enable(struct device *dev,
 
 static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
-	int ret, tmp;
+	int tmp;
 	int flagreg;
 
 	switch (cmd) {
@@ -400,24 +399,8 @@ static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		if (flagreg < 0)
 			return flagreg;
 
-		tmp = !!(flagreg & RX8010_FLAG_VLF);
-		if (copy_to_user((void __user *)arg, &tmp, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
-
-	case RTC_VL_CLR:
-		flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
-		if (flagreg < 0) {
-			return flagreg;
-		}
-
-		flagreg &= ~RX8010_FLAG_VLF;
-		ret = i2c_smbus_write_byte_data(client, RX8010_FLAG, flagreg);
-		if (ret < 0)
-			return ret;
-
-		return 0;
+		tmp = flagreg & RX8010_FLAG_VLF ? RTC_VL_DATA_INVALID : 0;
+		return put_user(tmp, (unsigned int __user *)arg);
 
 	default:
 		return -ENOIOCTLCMD;
@@ -482,7 +465,7 @@ static int rx8010_probe(struct i2c_client *client,
 
 	rx8010->rtc->max_user_freq = 1;
 
-	return err;
+	return 0;
 }
 
 static struct i2c_driver rx8010_driver = {
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index b9bda10589e0..a24f85893f90 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -67,7 +67,6 @@ static const struct i2c_device_id rx8025_id[] = {
 MODULE_DEVICE_TABLE(i2c, rx8025_id);
 
 struct rx8025_data {
-	struct i2c_client *client;
 	struct rtc_device *rtc;
 	u8 ctrl1;
 };
@@ -103,10 +102,10 @@ static s32 rx8025_write_regs(const struct i2c_client *client,
 
 static int rx8025_check_validity(struct device *dev)
 {
-	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	int ctrl2;
 
-	ctrl2 = rx8025_read_reg(rx8025->client, RX8025_REG_CTRL2);
+	ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
 	if (ctrl2 < 0)
 		return ctrl2;
 
@@ -178,6 +177,7 @@ out:
 
 static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
 	u8 date[7];
 	int err;
@@ -186,7 +186,7 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
 	if (err)
 		return err;
 
-	err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date);
+	err = rx8025_read_regs(client, RX8025_REG_SEC, 7, date);
 	if (err)
 		return err;
 
@@ -211,6 +211,7 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
 
 static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
 	u8 date[7];
 	int ret;
@@ -237,11 +238,11 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
 
 	dev_dbg(dev, "%s: write %7ph\n", __func__, date);
 
-	ret = rx8025_write_regs(rx8025->client, RX8025_REG_SEC, 7, date);
+	ret = rx8025_write_regs(client, RX8025_REG_SEC, 7, date);
 	if (ret < 0)
 		return ret;
 
-	return rx8025_reset_validity(rx8025->client);
+	return rx8025_reset_validity(client);
 }
 
 static int rx8025_init_client(struct i2c_client *client)
@@ -251,7 +252,7 @@ static int rx8025_init_client(struct i2c_client *client)
 	int need_clear = 0;
 	int err;
 
-	err = rx8025_read_regs(rx8025->client, RX8025_REG_CTRL1, 2, ctrl);
+	err = rx8025_read_regs(client, RX8025_REG_CTRL1, 2, ctrl);
 	if (err)
 		goto out;
 
@@ -280,8 +281,8 @@ out:
 /* Alarm support */
 static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
-	struct i2c_client *client = rx8025->client;
 	u8 ald[2];
 	int ctrl2, err;
 
@@ -347,18 +348,18 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE) {
 		rx8025->ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
-		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+		err = rx8025_write_reg(client, RX8025_REG_CTRL1,
 				       rx8025->ctrl1);
 		if (err)
 			return err;
 	}
-	err = rx8025_write_regs(rx8025->client, RX8025_REG_ALDMIN, 2, ald);
+	err = rx8025_write_regs(client, RX8025_REG_ALDMIN, 2, ald);
 	if (err)
 		return err;
 
 	if (t->enabled) {
 		rx8025->ctrl1 |= RX8025_BIT_CTRL1_DALE;
-		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+		err = rx8025_write_reg(client, RX8025_REG_CTRL1,
 				       rx8025->ctrl1);
 		if (err)
 			return err;
@@ -369,6 +370,7 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
 	u8 ctrl1;
 	int err;
@@ -381,7 +383,7 @@ static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled)
 
 	if (ctrl1 != rx8025->ctrl1) {
 		rx8025->ctrl1 = ctrl1;
-		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+		err = rx8025_write_reg(client, RX8025_REG_CTRL1,
 				       rx8025->ctrl1);
 		if (err)
 			return err;
@@ -516,7 +518,6 @@ static int rx8025_probe(struct i2c_client *client,
 	if (!rx8025)
 		return -ENOMEM;
 
-	rx8025->client = client;
 	i2c_set_clientdata(client, rx8025);
 
 	err = rx8025_init_client(client);
diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index 781cabb2afca..d774aa18f57a 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -897,8 +897,11 @@ static int stm32_rtc_resume(struct device *dev)
 	}
 
 	ret = stm32_rtc_wait_sync(rtc);
-	if (ret < 0)
+	if (ret < 0) {
+		if (rtc->data->has_pclk)
+			clk_disable_unprepare(rtc->pclk);
 		return ret;
+	}
 
 	if (device_may_wakeup(dev))
 		return disable_irq_wake(rtc->irq_alarm);
diff --git a/drivers/rtc/rtc-tps6586x.c b/drivers/rtc/rtc-tps6586x.c
index 859d901fa6cb..e39af2d67051 100644
--- a/drivers/rtc/rtc-tps6586x.c
+++ b/drivers/rtc/rtc-tps6586x.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/mfd/tps6586x.h>
 #include <linux/module.h>
@@ -267,6 +268,8 @@ static int tps6586x_rtc_probe(struct platform_device *pdev)
 	rtc->rtc->start_secs = mktime64(2009, 1, 1, 0, 0, 0);
 	rtc->rtc->set_start_time = true;
 
+	irq_set_status_flags(rtc->irq, IRQ_NOAUTOEN);
+
 	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
 				tps6586x_rtc_irq,
 				IRQF_ONESHOT,
@@ -276,7 +279,6 @@ static int tps6586x_rtc_probe(struct platform_device *pdev)
 				rtc->irq, ret);
 		goto fail_rtc_register;
 	}
-	disable_irq(rtc->irq);
 
 	ret = rtc_register_device(rtc->rtc);
 	if (ret)
diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
index 539690568298..5786866c09e9 100644
--- a/drivers/rtc/rtc-zynqmp.c
+++ b/drivers/rtc/rtc-zynqmp.c
@@ -94,7 +94,7 @@ static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		 * RTC has updated the CURRENT_TIME with the time written into
 		 * SET_TIME_WRITE register.
 		 */
-		rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm);
+		read_time = readl(xrtcdev->reg_base + RTC_CUR_TM);
 	} else {
 		/*
 		 * Time written in SET_TIME_WRITE has not yet updated into
@@ -104,8 +104,8 @@ static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		 * reading.
 		 */
 		read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
-		rtc_time64_to_tm(read_time, tm);
 	}
+	rtc_time64_to_tm(read_time, tm);
 
 	return 0;
 }