Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The major thing here is the addition of some helpers to factor code
  out of drivers, making a fair proportion of regulators much more just
  data rather than code which is nice.

  - Helpers in the core for regulators using regmap, providing generic
    implementations of the enable and voltage selection operations which
    just need data to describe them in the drivers.
  - Split out voltage mapping and voltage setting, allowing many more
    drivers to take advantage of the infrastructure for selectors.
  - Loads and loads of cleanups from Axel Lin once again, including many
    changes to take advantage of the above new framework features
  - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI
    TPS65913, TI TWL6035 and TI TWL6037.

  Some of the registration changes to support the core refactoring
  caused so many conflicts that eventually topic branches were abandoned
  for this release."

* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits)
  regulator: tps65910: use of_node of matched regulator being register
  regulator: tps65910: dt: support when "regulators" node found
  regulator: tps65910: add error message in case of failure
  regulator: tps62360: dt: initialize of_node param for regulator register.
  regulator: tps65910: use devm_* for memory allocation
  regulator: tps65910: use small letter for regulator names
  mfd: tpx6586x:  Depend on regulator
  regulator: regulator for Palmas Kconfig
  regulator: regulator driver for Palmas series chips
  regulator: Enable Device Tree for the db8500-prcmu regulator driver
  regulator: db8500-prcmu: Separate regulator registration from probe
  regulator: ab3100: Use regulator_map_voltage_iterate()
  regulator: tps65217: Convert to set_voltage_sel and map_voltage
  regulator: Enable the ab8500 for Device Tree
  regulator: ab8500: Split up probe() into manageable pieces
  regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info
  regulator: max8649: Remove unused check_range() function
  regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info
  regulator: da9052: Convert to set_voltage_sel and map_voltage
  regulator: max8952: Use devm_kzalloc
  ...

1 files changed, 24 insertions, 63 deletions

diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 0cfabd318a59..981bea9cb9d7 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -124,6 +124,10 @@ static const int *ldo_voltage_map[] = {
 static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
 {
 	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+
+	if (index > LDO_VOL_MAX_IDX)
+		return -EINVAL;
+
 	return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
 }
 
@@ -168,32 +172,15 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
 	return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
 }
 
-static int lp3971_ldo_set_voltage(struct regulator_dev *dev,
-				  int min_uV, int max_uV,
-				  unsigned int *selector)
+static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
+				      unsigned int selector)
 {
 	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3971_LDO1;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
-	const int *vol_map = LDO_VOL_VALUE_MAP(ldo);
-	u16 val;
-
-	if (min_vol < vol_map[LDO_VOL_MIN_IDX] ||
-	    min_vol > vol_map[LDO_VOL_MAX_IDX])
-		return -EINVAL;
-
-	for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)
-		if (vol_map[val] >= min_vol)
-			break;
-
-	if (val > LDO_VOL_MAX_IDX || vol_map[val] > max_vol)
-		return -EINVAL;
-
-	*selector = val;
 
 	return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
 			LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo),
-			val << LDO_VOL_CONTR_SHIFT(ldo));
+			selector << LDO_VOL_CONTR_SHIFT(ldo));
 }
 
 static struct regulator_ops lp3971_ldo_ops = {
@@ -202,11 +189,14 @@ static struct regulator_ops lp3971_ldo_ops = {
 	.enable = lp3971_ldo_enable,
 	.disable = lp3971_ldo_disable,
 	.get_voltage = lp3971_ldo_get_voltage,
-	.set_voltage = lp3971_ldo_set_voltage,
+	.set_voltage_sel = lp3971_ldo_set_voltage_sel,
 };
 
 static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
 {
+	if (index < BUCK_TARGET_VOL_MIN_IDX || index > BUCK_TARGET_VOL_MAX_IDX)
+		return -EINVAL;
+
 	return 1000 * buck_voltage_map[index];
 }
 
@@ -259,33 +249,15 @@ static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
 	return val;
 }
 
-static int lp3971_dcdc_set_voltage(struct regulator_dev *dev,
-				   int min_uV, int max_uV,
-				   unsigned int *selector)
+static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
+				       unsigned int selector)
 {
 	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3971_DCDC1;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
-	const int *vol_map = buck_voltage_map;
-	u16 val;
 	int ret;
 
-	if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] ||
-	    min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX])
-		return -EINVAL;
-
-	for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX;
-	     val++)
-		if (vol_map[val] >= min_vol)
-			break;
-
-	if (val > BUCK_TARGET_VOL_MAX_IDX || vol_map[val] > max_vol)
-		return -EINVAL;
-
-	*selector = val;
-
 	ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
-	       BUCK_TARGET_VOL_MASK, val);
+	       BUCK_TARGET_VOL_MASK, selector);
 	if (ret)
 		return ret;
 
@@ -306,10 +278,10 @@ static struct regulator_ops lp3971_dcdc_ops = {
 	.enable = lp3971_dcdc_enable,
 	.disable = lp3971_dcdc_disable,
 	.get_voltage = lp3971_dcdc_get_voltage,
-	.set_voltage = lp3971_dcdc_set_voltage,
+	.set_voltage_sel = lp3971_dcdc_set_voltage_sel,
 };
 
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
 	{
 		.name = "LDO1",
 		.id = LP3971_LDO1,
@@ -449,10 +421,15 @@ static int __devinit setup_regulators(struct lp3971 *lp3971,
 
 	/* Instantiate the regulators */
 	for (i = 0; i < pdata->num_regulators; i++) {
+		struct regulator_config config = { };
 		struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
-		lp3971->rdev[i] = regulator_register(&regulators[reg->id],
-				lp3971->dev, reg->initdata, lp3971, NULL);
 
+		config.dev = lp3971->dev;
+		config.init_data = reg->initdata;
+		config.driver_data = lp3971;
+
+		lp3971->rdev[i] = regulator_register(&regulators[reg->id],
+						     &config);
 		if (IS_ERR(lp3971->rdev[i])) {
 			err = PTR_ERR(lp3971->rdev[i]);
 			dev_err(lp3971->dev, "regulator init failed: %d\n",
@@ -545,23 +522,7 @@ static struct i2c_driver lp3971_i2c_driver = {
 	.id_table = lp3971_i2c_id,
 };
 
-static int __init lp3971_module_init(void)
-{
-	int ret;
-
-	ret = i2c_add_driver(&lp3971_i2c_driver);
-	if (ret != 0)
-		pr_err("Failed to register I2C driver: %d\n", ret);
-
-	return ret;
-}
-module_init(lp3971_module_init);
-
-static void __exit lp3971_module_exit(void)
-{
-	i2c_del_driver(&lp3971_i2c_driver);
-}
-module_exit(lp3971_module_exit);
+module_i2c_driver(lp3971_i2c_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>");