ARM i.MX: Move i.MX pwm driver to pwm framework

Move the driver to drivers/pwm/ and convert it to use the framework.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[eric@eukrea.com: set chip.dev to prevent probe failure]
[eric@eukrea.com: fix pwmchip_add return code test]
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>

3 files changed, 277 insertions, 0 deletions

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 0ef4f3037c4a..a9a971581108 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -18,6 +18,15 @@ config PWM_BFIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-bfin.
 
+config PWM_IMX
+	tristate "i.MX pwm support"
+	depends on ARCH_MXC
+	help
+	  Generic PWM framework driver for i.MX.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-imx.
+
 config PWM_PXA
 	tristate "PXA PWM support"
 	depends on ARCH_PXA
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index e859c513add8..3dd1b8357a0c 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
+obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
 obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
new file mode 100644
index 000000000000..900d14562de8
--- /dev/null
+++ b/drivers/pwm/pwm-imx.c
@@ -0,0 +1,267 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC    0x00   /* PWM Control Register */
+#define MX1_PWMS    0x04   /* PWM Sample Register */
+#define MX1_PWMP    0x08   /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR                 0x00    /* PWM Control Register */
+#define MX3_PWMSAR                0x0C    /* PWM Sample Register */
+#define MX3_PWMPR                 0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN                (1 << 24)
+#define MX3_PWMCR_WAITEN                (1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
+#define MX3_PWMCR_EN              (1 << 0)
+
+struct imx_chip {
+	struct clk	*clk;
+
+	int		clk_enabled;
+	void __iomem	*mmio_base;
+
+	struct pwm_chip	chip;
+};
+
+#define to_imx_chip(chip)	container_of(chip, struct imx_chip, chip)
+
+static int imx_pwm_config(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+
+	if (!(cpu_is_mx1() || cpu_is_mx21())) {
+		unsigned long long c;
+		unsigned long period_cycles, duty_cycles, prescale;
+		u32 cr;
+
+		c = clk_get_rate(imx->clk);
+		c = c * period_ns;
+		do_div(c, 1000000000);
+		period_cycles = c;
+
+		prescale = period_cycles / 0x10000 + 1;
+
+		period_cycles /= prescale;
+		c = (unsigned long long)period_cycles * duty_ns;
+		do_div(c, period_ns);
+		duty_cycles = c;
+
+		/*
+		 * according to imx pwm RM, the real period value should be
+		 * PERIOD value in PWMPR plus 2.
+		 */
+		if (period_cycles > 2)
+			period_cycles -= 2;
+		else
+			period_cycles = 0;
+
+		writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+		writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+		cr = MX3_PWMCR_PRESCALER(prescale) |
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
+
+		if (cpu_is_mx25())
+			cr |= MX3_PWMCR_CLKSRC_IPG;
+		else
+			cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+		writel(cr, imx->mmio_base + MX3_PWMCR);
+	} else if (cpu_is_mx1() || cpu_is_mx21()) {
+		/* The PWM subsystem allows for exact frequencies. However,
+		 * I cannot connect a scope on my device to the PWM line and
+		 * thus cannot provide the program the PWM controller
+		 * exactly. Instead, I'm relying on the fact that the
+		 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+		 * function group already. So I'll just modify the PWM sample
+		 * register to follow the ratio of duty_ns vs. period_ns
+		 * accordingly.
+		 *
+		 * This is good enough for programming the brightness of
+		 * the LCD backlight.
+		 *
+		 * The real implementation would divide PERCLK[0] first by
+		 * both the prescaler (/1 .. /128) and then by CLKSEL
+		 * (/2 .. /16).
+		 */
+		u32 max = readl(imx->mmio_base + MX1_PWMP);
+		u32 p = max * duty_ns / period_ns;
+		writel(max - p, imx->mmio_base + MX1_PWMS);
+	} else {
+		BUG();
+	}
+
+	return 0;
+}
+
+static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	int rc = 0;
+
+	if (!imx->clk_enabled) {
+		rc = clk_prepare_enable(imx->clk);
+		if (!rc)
+			imx->clk_enabled = 1;
+	}
+	return rc;
+}
+
+static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+
+	writel(0, imx->mmio_base + MX3_PWMCR);
+
+	if (imx->clk_enabled) {
+		clk_disable_unprepare(imx->clk);
+		imx->clk_enabled = 0;
+	}
+}
+
+static struct pwm_ops imx_pwm_ops = {
+	.enable = imx_pwm_enable,
+	.disable = imx_pwm_disable,
+	.config = imx_pwm_config,
+	.owner = THIS_MODULE,
+};
+
+static int __devinit imx_pwm_probe(struct platform_device *pdev)
+{
+	struct imx_chip *imx;
+	struct resource *r;
+	int ret = 0;
+
+	imx = kzalloc(sizeof(*imx), GFP_KERNEL);
+	if (imx == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	imx->clk = clk_get(&pdev->dev, "pwm");
+
+	if (IS_ERR(imx->clk)) {
+		ret = PTR_ERR(imx->clk);
+		goto err_free;
+	}
+
+	imx->chip.ops = &imx_pwm_ops;
+	imx->chip.dev = &pdev->dev;
+	imx->chip.base = -1;
+	imx->chip.npwm = 1;
+
+	imx->clk_enabled = 0;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	imx->mmio_base = ioremap(r->start, resource_size(r));
+	if (imx->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	ret = pwmchip_add(&imx->chip);
+	if (ret < 0)
+		goto err_iounmap;
+
+	platform_set_drvdata(pdev, imx);
+	return 0;
+
+err_iounmap:
+	iounmap(imx->mmio_base);
+err_free_mem:
+	release_mem_region(r->start, resource_size(r));
+err_free_clk:
+	clk_put(imx->clk);
+err_free:
+	kfree(imx);
+	return ret;
+}
+
+static int __devexit imx_pwm_remove(struct platform_device *pdev)
+{
+	struct imx_chip *imx;
+	struct resource *r;
+	int ret;
+
+	imx = platform_get_drvdata(pdev);
+	if (imx == NULL)
+		return -ENODEV;
+
+	ret = pwmchip_remove(&imx->chip);
+	if (ret)
+		return ret;
+
+	iounmap(imx->mmio_base);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, resource_size(r));
+
+	clk_put(imx->clk);
+
+	kfree(imx);
+	return 0;
+}
+
+static struct platform_driver imx_pwm_driver = {
+	.driver		= {
+		.name	= "mxc_pwm",
+	},
+	.probe		= imx_pwm_probe,
+	.remove		= __devexit_p(imx_pwm_remove),
+};
+
+static int __init imx_pwm_init(void)
+{
+	return platform_driver_register(&imx_pwm_driver);
+}
+arch_initcall(imx_pwm_init);
+
+static void __exit imx_pwm_exit(void)
+{
+	platform_driver_unregister(&imx_pwm_driver);
+}
+module_exit(imx_pwm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");