Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 142 insertions, 0 deletions

diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
new file mode 100644
index 000000000000..64fd5e37f2d2
--- /dev/null
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -0,0 +1,142 @@
+/*
+ * drivers/pcmcia/sa1100_h3600.c
+ *
+ * PCMCIA implementation routines for H3600
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch/h3600.h>
+
+#include "sa1100_generic.h"
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, IRQ_GPIO_H3600_PCMCIA_CD0, "PCMCIA CD0" },
+	{ 1, IRQ_GPIO_H3600_PCMCIA_CD1, "PCMCIA CD1" }
+};
+
+static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = skt->nr ? IRQ_GPIO_H3600_PCMCIA_IRQ1
+			   : IRQ_GPIO_H3600_PCMCIA_IRQ0;
+
+
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+  
+	/* Disable CF bus: */
+	clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
+	clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
+	set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+}
+
+static void
+h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
+{
+	unsigned long levels = GPLR;
+
+	switch (skt->nr) {
+	case 0:
+		state->detect = levels & GPIO_H3600_PCMCIA_CD0 ? 0 : 1;
+		state->ready = levels & GPIO_H3600_PCMCIA_IRQ0 ? 1 : 0;
+		state->bvd1 = 0;
+		state->bvd2 = 0;
+		state->wrprot = 0; /* Not available on H3600. */
+		state->vs_3v = 0;
+		state->vs_Xv = 0;
+		break;
+
+	case 1:
+		state->detect = levels & GPIO_H3600_PCMCIA_CD1 ? 0 : 1;
+		state->ready = levels & GPIO_H3600_PCMCIA_IRQ1 ? 1 : 0;
+		state->bvd1 = 0;
+		state->bvd2 = 0;
+		state->wrprot = 0; /* Not available on H3600. */
+		state->vs_3v = 0;
+		state->vs_Xv = 0;
+		break;
+	}
+}
+
+static int
+h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+	if (state->Vcc != 0 && state->Vcc != 33 && state->Vcc != 50) {
+		printk(KERN_ERR "h3600_pcmcia: unrecognized Vcc %u.%uV\n",
+		       state->Vcc / 10, state->Vcc % 10);
+		return -1;
+	}
+
+	if (state->flags & SS_RESET)
+		set_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
+	else
+		clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
+
+	/* Silently ignore Vpp, output enable, speaker enable. */
+
+	return 0;
+}
+
+static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	/* Enable CF bus: */
+	set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
+	set_h3600_egpio(IPAQ_EGPIO_OPT_ON);
+	clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+
+	msleep(10);
+
+	soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+	/*
+	 * FIXME:  This doesn't fit well.  We don't have the mechanism in
+	 * the generic PCMCIA layer to deal with the idea of two sockets
+	 * on one bus.  We rely on the cs.c behaviour shutting down
+	 * socket 0 then socket 1.
+	 */
+	if (skt->nr == 1) {
+		clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
+		clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
+		/* hmm, does this suck power? */
+		set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+	}
+}
+
+struct pcmcia_low_level h3600_pcmcia_ops = { 
+	.owner			= THIS_MODULE,
+	.hw_init		= h3600_pcmcia_hw_init,
+	.hw_shutdown		= h3600_pcmcia_hw_shutdown,
+	.socket_state		= h3600_pcmcia_socket_state,
+	.configure_socket	= h3600_pcmcia_configure_socket,
+
+	.socket_init		= h3600_pcmcia_socket_init,
+	.socket_suspend		= h3600_pcmcia_socket_suspend,
+};
+
+int __init pcmcia_h3600_init(struct device *dev)
+{
+	int ret = -ENODEV;
+
+	if (machine_is_h3600())
+		ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
+
+	return ret;
+}