PCI: Enable PASID only if entire path supports End-End TLP prefixes

A PCIe endpoint carries the process address space identifier (PASID) in
the TLP prefix as part of the memory read/write transaction. The address
information in the TLP is relevant only for a given PASID context.

An IOMMU takes PASID value and the address information from the
TLP to look up the physical address in the system.

PASID is an End-End TLP Prefix (PCIe r4.0, sec 6.20).  Sec 2.2.10.2 says

  It is an error to receive a TLP with an End-End TLP Prefix by a
  Receiver that does not support End-End TLP Prefixes. A TLP in
  violation of this rule is handled as a Malformed TLP. This is a
  reported error associated with the Receiving Port (see Section 6.2).

Prevent error condition by proactively requiring End-End TLP prefix to be
supported on the entire data path between the endpoint and the root port
before enabling PASID.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

1 files changed, 24 insertions, 0 deletions

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ac876e32de4b..4c35c2909d57 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2042,6 +2042,29 @@ static void pci_configure_ltr(struct pci_dev *dev)
 #endif
 }
 
+static void pci_configure_eetlp_prefix(struct pci_dev *dev)
+{
+#ifdef CONFIG_PCI_PASID
+	struct pci_dev *bridge;
+	u32 cap;
+
+	if (!pci_is_pcie(dev))
+		return;
+
+	pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
+	if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
+		return;
+
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
+		dev->eetlp_prefix_path = 1;
+	else {
+		bridge = pci_upstream_bridge(dev);
+		if (bridge && bridge->eetlp_prefix_path)
+			dev->eetlp_prefix_path = 1;
+	}
+#endif
+}
+
 static void pci_configure_device(struct pci_dev *dev)
 {
 	struct hotplug_params hpp;
@@ -2051,6 +2074,7 @@ static void pci_configure_device(struct pci_dev *dev)
 	pci_configure_extended_tags(dev, NULL);
 	pci_configure_relaxed_ordering(dev);
 	pci_configure_ltr(dev);
+	pci_configure_eetlp_prefix(dev);
 
 	memset(&hpp, 0, sizeof(hpp));
 	ret = pci_get_hp_params(dev, &hpp);