Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...

1 files changed, 29 insertions, 297 deletions

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index dbeeb385fb9f..3d5271a7a849 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1426,26 +1426,38 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
 	pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
 
+	parent = pci_upstream_bridge(pdev);
+	if (!parent)
+		return;
+
 	/*
-	 * A Root Port or a PCI-to-PCIe bridge is always the upstream end
-	 * of a Link.  No PCIe component has two Links.  Two Links are
-	 * connected by a Switch that has a Port on each Link and internal
-	 * logic to connect the two Ports.
+	 * Some systems do not identify their upstream/downstream ports
+	 * correctly so detect impossible configurations here and correct
+	 * the port type accordingly.
 	 */
 	type = pci_pcie_type(pdev);
-	if (type == PCI_EXP_TYPE_ROOT_PORT ||
-	    type == PCI_EXP_TYPE_PCIE_BRIDGE)
-		pdev->has_secondary_link = 1;
-	else if (type == PCI_EXP_TYPE_UPSTREAM ||
-		 type == PCI_EXP_TYPE_DOWNSTREAM) {
-		parent = pci_upstream_bridge(pdev);
-
+	if (type == PCI_EXP_TYPE_DOWNSTREAM) {
 		/*
-		 * Usually there's an upstream device (Root Port or Switch
-		 * Downstream Port), but we can't assume one exists.
+		 * If pdev claims to be downstream port but the parent
+		 * device is also downstream port assume pdev is actually
+		 * upstream port.
 		 */
-		if (parent && !parent->has_secondary_link)
-			pdev->has_secondary_link = 1;
+		if (pcie_downstream_port(parent)) {
+			pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n");
+			pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
+			pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM;
+		}
+	} else if (type == PCI_EXP_TYPE_UPSTREAM) {
+		/*
+		 * If pdev claims to be upstream port but the parent
+		 * device is also upstream port assume pdev is actually
+		 * downstream port.
+		 */
+		if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) {
+			pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n");
+			pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
+			pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM;
+		}
 	}
 }
 
@@ -1915,275 +1927,6 @@ static void pci_configure_mps(struct pci_dev *dev)
 		 p_mps, mps, mpss);
 }
 
-static struct hpp_type0 pci_default_type0 = {
-	.revision = 1,
-	.cache_line_size = 8,
-	.latency_timer = 0x40,
-	.enable_serr = 0,
-	.enable_perr = 0,
-};
-
-static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
-{
-	u16 pci_cmd, pci_bctl;
-
-	if (!hpp)
-		hpp = &pci_default_type0;
-
-	if (hpp->revision > 1) {
-		pci_warn(dev, "PCI settings rev %d not supported; using defaults\n",
-			 hpp->revision);
-		hpp = &pci_default_type0;
-	}
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
-	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
-	if (hpp->enable_serr)
-		pci_cmd |= PCI_COMMAND_SERR;
-	if (hpp->enable_perr)
-		pci_cmd |= PCI_COMMAND_PARITY;
-	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
-
-	/* Program bridge control value */
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
-				      hpp->latency_timer);
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
-		if (hpp->enable_perr)
-			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
-	}
-}
-
-static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
-{
-	int pos;
-
-	if (!hpp)
-		return;
-
-	pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
-	if (!pos)
-		return;
-
-	pci_warn(dev, "PCI-X settings not supported\n");
-}
-
-static bool pcie_root_rcb_set(struct pci_dev *dev)
-{
-	struct pci_dev *rp = pcie_find_root_port(dev);
-	u16 lnkctl;
-
-	if (!rp)
-		return false;
-
-	pcie_capability_read_word(rp, PCI_EXP_LNKCTL, &lnkctl);
-	if (lnkctl & PCI_EXP_LNKCTL_RCB)
-		return true;
-
-	return false;
-}
-
-static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
-{
-	int pos;
-	u32 reg32;
-
-	if (!hpp)
-		return;
-
-	if (!pci_is_pcie(dev))
-		return;
-
-	if (hpp->revision > 1) {
-		pci_warn(dev, "PCIe settings rev %d not supported\n",
-			 hpp->revision);
-		return;
-	}
-
-	/*
-	 * Don't allow _HPX to change MPS or MRRS settings.  We manage
-	 * those to make sure they're consistent with the rest of the
-	 * platform.
-	 */
-	hpp->pci_exp_devctl_and |= PCI_EXP_DEVCTL_PAYLOAD |
-				    PCI_EXP_DEVCTL_READRQ;
-	hpp->pci_exp_devctl_or &= ~(PCI_EXP_DEVCTL_PAYLOAD |
-				    PCI_EXP_DEVCTL_READRQ);
-
-	/* Initialize Device Control Register */
-	pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
-			~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or);
-
-	/* Initialize Link Control Register */
-	if (pcie_cap_has_lnkctl(dev)) {
-
-		/*
-		 * If the Root Port supports Read Completion Boundary of
-		 * 128, set RCB to 128.  Otherwise, clear it.
-		 */
-		hpp->pci_exp_lnkctl_and |= PCI_EXP_LNKCTL_RCB;
-		hpp->pci_exp_lnkctl_or &= ~PCI_EXP_LNKCTL_RCB;
-		if (pcie_root_rcb_set(dev))
-			hpp->pci_exp_lnkctl_or |= PCI_EXP_LNKCTL_RCB;
-
-		pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL,
-			~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or);
-	}
-
-	/* Find Advanced Error Reporting Enhanced Capability */
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-	if (!pos)
-		return;
-
-	/* Initialize Uncorrectable Error Mask Register */
-	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
-	reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
-	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
-
-	/* Initialize Uncorrectable Error Severity Register */
-	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
-	reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
-	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
-
-	/* Initialize Correctable Error Mask Register */
-	pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
-	reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
-	pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
-
-	/* Initialize Advanced Error Capabilities and Control Register */
-	pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
-	reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
-
-	/* Don't enable ECRC generation or checking if unsupported */
-	if (!(reg32 & PCI_ERR_CAP_ECRC_GENC))
-		reg32 &= ~PCI_ERR_CAP_ECRC_GENE;
-	if (!(reg32 & PCI_ERR_CAP_ECRC_CHKC))
-		reg32 &= ~PCI_ERR_CAP_ECRC_CHKE;
-	pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
-
-	/*
-	 * FIXME: The following two registers are not supported yet.
-	 *
-	 *   o Secondary Uncorrectable Error Severity Register
-	 *   o Secondary Uncorrectable Error Mask Register
-	 */
-}
-
-static u16 hpx3_device_type(struct pci_dev *dev)
-{
-	u16 pcie_type = pci_pcie_type(dev);
-	const int pcie_to_hpx3_type[] = {
-		[PCI_EXP_TYPE_ENDPOINT]    = HPX_TYPE_ENDPOINT,
-		[PCI_EXP_TYPE_LEG_END]     = HPX_TYPE_LEG_END,
-		[PCI_EXP_TYPE_RC_END]      = HPX_TYPE_RC_END,
-		[PCI_EXP_TYPE_RC_EC]       = HPX_TYPE_RC_EC,
-		[PCI_EXP_TYPE_ROOT_PORT]   = HPX_TYPE_ROOT_PORT,
-		[PCI_EXP_TYPE_UPSTREAM]    = HPX_TYPE_UPSTREAM,
-		[PCI_EXP_TYPE_DOWNSTREAM]  = HPX_TYPE_DOWNSTREAM,
-		[PCI_EXP_TYPE_PCI_BRIDGE]  = HPX_TYPE_PCI_BRIDGE,
-		[PCI_EXP_TYPE_PCIE_BRIDGE] = HPX_TYPE_PCIE_BRIDGE,
-	};
-
-	if (pcie_type >= ARRAY_SIZE(pcie_to_hpx3_type))
-		return 0;
-
-	return pcie_to_hpx3_type[pcie_type];
-}
-
-static u8 hpx3_function_type(struct pci_dev *dev)
-{
-	if (dev->is_virtfn)
-		return HPX_FN_SRIOV_VIRT;
-	else if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV) > 0)
-		return HPX_FN_SRIOV_PHYS;
-	else
-		return HPX_FN_NORMAL;
-}
-
-static bool hpx3_cap_ver_matches(u8 pcie_cap_id, u8 hpx3_cap_id)
-{
-	u8 cap_ver = hpx3_cap_id & 0xf;
-
-	if ((hpx3_cap_id & BIT(4)) && cap_ver >= pcie_cap_id)
-		return true;
-	else if (cap_ver == pcie_cap_id)
-		return true;
-
-	return false;
-}
-
-static void program_hpx_type3_register(struct pci_dev *dev,
-				       const struct hpx_type3 *reg)
-{
-	u32 match_reg, write_reg, header, orig_value;
-	u16 pos;
-
-	if (!(hpx3_device_type(dev) & reg->device_type))
-		return;
-
-	if (!(hpx3_function_type(dev) & reg->function_type))
-		return;
-
-	switch (reg->config_space_location) {
-	case HPX_CFG_PCICFG:
-		pos = 0;
-		break;
-	case HPX_CFG_PCIE_CAP:
-		pos = pci_find_capability(dev, reg->pci_exp_cap_id);
-		if (pos == 0)
-			return;
-
-		break;
-	case HPX_CFG_PCIE_CAP_EXT:
-		pos = pci_find_ext_capability(dev, reg->pci_exp_cap_id);
-		if (pos == 0)
-			return;
-
-		pci_read_config_dword(dev, pos, &header);
-		if (!hpx3_cap_ver_matches(PCI_EXT_CAP_VER(header),
-					  reg->pci_exp_cap_ver))
-			return;
-
-		break;
-	case HPX_CFG_VEND_CAP:	/* Fall through */
-	case HPX_CFG_DVSEC:	/* Fall through */
-	default:
-		pci_warn(dev, "Encountered _HPX type 3 with unsupported config space location");
-		return;
-	}
-
-	pci_read_config_dword(dev, pos + reg->match_offset, &match_reg);
-
-	if ((match_reg & reg->match_mask_and) != reg->match_value)
-		return;
-
-	pci_read_config_dword(dev, pos + reg->reg_offset, &write_reg);
-	orig_value = write_reg;
-	write_reg &= reg->reg_mask_and;
-	write_reg |= reg->reg_mask_or;
-
-	if (orig_value == write_reg)
-		return;
-
-	pci_write_config_dword(dev, pos + reg->reg_offset, write_reg);
-
-	pci_dbg(dev, "Applied _HPX3 at [0x%x]: 0x%08x -> 0x%08x",
-		pos, orig_value, write_reg);
-}
-
-static void program_hpx_type3(struct pci_dev *dev, struct hpx_type3 *hpx3)
-{
-	if (!hpx3)
-		return;
-
-	if (!pci_is_pcie(dev))
-		return;
-
-	program_hpx_type3_register(dev, hpx3);
-}
-
 int pci_configure_extended_tags(struct pci_dev *dev, void *ign)
 {
 	struct pci_host_bridge *host;
@@ -2364,13 +2107,6 @@ static void pci_configure_serr(struct pci_dev *dev)
 
 static void pci_configure_device(struct pci_dev *dev)
 {
-	static const struct hotplug_program_ops hp_ops = {
-		.program_type0 = program_hpp_type0,
-		.program_type1 = program_hpp_type1,
-		.program_type2 = program_hpp_type2,
-		.program_type3 = program_hpx_type3,
-	};
-
 	pci_configure_mps(dev);
 	pci_configure_extended_tags(dev, NULL);
 	pci_configure_relaxed_ordering(dev);
@@ -2378,7 +2114,7 @@ static void pci_configure_device(struct pci_dev *dev)
 	pci_configure_eetlp_prefix(dev);
 	pci_configure_serr(dev);
 
-	pci_acpi_program_hp_params(dev, &hp_ops);
+	pci_acpi_program_hp_params(dev);
 }
 
 static void pci_release_capabilities(struct pci_dev *dev)
@@ -2759,12 +2495,8 @@ static int only_one_child(struct pci_bus *bus)
 	 * A PCIe Downstream Port normally leads to a Link with only Device
 	 * 0 on it (PCIe spec r3.1, sec 7.3.1).  As an optimization, scan
 	 * only for Device 0 in that situation.
-	 *
-	 * Checking has_secondary_link is a hack to identify Downstream
-	 * Ports because sometimes Switches are configured such that the
-	 * PCIe Port Type labels are backwards.
 	 */
-	if (bridge && pci_is_pcie(bridge) && bridge->has_secondary_link)
+	if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge))
 		return 1;
 
 	return 0;