parport: fix if-statement empty body warnings

Eliminate warnings by using pr_debug which is the more typical
kernel debugging style and also enable dynamic_debug on these
outputs.

Miscellaneous:

o A few messages were logged at KERN_INFO when enabled, now KERN_DEBUG
o Convert %d/%d to %zd/%zu to avoid compilation warnings

Original-patch-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20200403134325.11523-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 23 insertions, 44 deletions

diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index 5d41dda6da4e..b1c9f513167b 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -27,12 +27,6 @@
 #undef DEBUG /* Don't want a garbled console */
 #endif
 
-#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
-#else
-#define DPRINTK(stuff...)
-#endif
-
 /***                                *
  * One-way data transfer functions. *
  *                                ***/
@@ -115,7 +109,7 @@ size_t parport_ieee1284_write_compat (struct parport *port,
 		if (signal_pending (current))
 			break;
 
-		DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name);
+		pr_debug("%s: Timed out\n", port->name);
 		break;
 
 	ready:
@@ -178,9 +172,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
 		if (parport_wait_peripheral (port,
 					     PARPORT_STATUS_ACK, 0)) {
 			/* Timeout -- no more data? */
-			DPRINTK (KERN_DEBUG
-				 "%s: Nibble timeout at event 9 (%d bytes)\n",
-				 port->name, i/2);
+			pr_debug("%s: Nibble timeout at event 9 (%d bytes)\n",
+				 port->name, i / 2);
 			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
 			break;
 		}
@@ -201,8 +194,7 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
 					     PARPORT_STATUS_ACK,
 					     PARPORT_STATUS_ACK)) {
 			/* Timeout -- no more data? */
-			DPRINTK (KERN_DEBUG
-				 "%s: Nibble timeout at event 11\n",
+			pr_debug("%s: Nibble timeout at event 11\n",
 				 port->name);
 			break;
 		}
@@ -219,9 +211,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
 		/* Read the last nibble without checking data avail. */
 		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
 		end_of_data:
-			DPRINTK (KERN_DEBUG
-				"%s: No more nibble data (%d bytes)\n",
-				port->name, i/2);
+			pr_debug("%s: No more nibble data (%d bytes)\n",
+				 port->name, i / 2);
 
 			/* Go to reverse idle phase. */
 			parport_frob_control (port,
@@ -272,8 +263,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
 			/* Timeout -- no more data? */
 			parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
 						 0);
-			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n",
-				 port->name);
+			pr_debug("%s: Byte timeout at event 9\n", port->name);
 			break;
 		}
 
@@ -288,8 +278,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
 					     PARPORT_STATUS_ACK,
 					     PARPORT_STATUS_ACK)) {
 			/* Timeout -- no more data? */
-			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n",
-				 port->name);
+			pr_debug("%s: Byte timeout at event 11\n", port->name);
 			break;
 		}
 
@@ -307,8 +296,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
 		/* Read the last byte without checking data avail. */
 		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
 		end_of_data:
-			DPRINTK (KERN_DEBUG
-				 "%s: No more byte data (%zd bytes)\n",
+			pr_debug("%s: No more byte data (%zd bytes)\n",
 				 port->name, count);
 
 			/* Go to reverse idle phase. */
@@ -353,12 +341,10 @@ int ecp_forward_to_reverse (struct parport *port)
 					  PARPORT_STATUS_PAPEROUT, 0);
 
 	if (!retval) {
-		DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n",
-			 port->name);
+		pr_debug("%s: ECP direction: reverse\n", port->name);
 		port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
 	} else {
-		DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n",
-			 port->name);
+		pr_debug("%s: ECP direction: failed to reverse\n", port->name);
 		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
 	}
 
@@ -384,12 +370,10 @@ int ecp_reverse_to_forward (struct parport *port)
 
 	if (!retval) {
 		parport_data_forward (port);
-		DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
-			 port->name);
+		pr_debug("%s: ECP direction: forward\n", port->name);
 		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
 	} else {
-		DPRINTK (KERN_DEBUG
-			 "%s: ECP direction: failed to switch forward\n",
+		pr_debug("%s: ECP direction: failed to switch forward\n",
 			 port->name);
 		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
 	}
@@ -450,7 +434,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
 		}
 
 		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
-		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+		pr_debug("%s: ECP transfer stalled!\n", port->name);
 
 		parport_frob_control (port, PARPORT_CONTROL_INIT,
 				      PARPORT_CONTROL_INIT);
@@ -466,8 +450,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
 		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
 			break;
 
-		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
-			 port->name);
+		pr_debug("%s: Host transfer recovered\n", port->name);
 
 		if (time_after_eq (jiffies, expire)) break;
 		goto try_again;
@@ -565,23 +548,20 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
                    command or a normal data byte, don't accept it. */
 		if (command) {
 			if (byte & 0x80) {
-				DPRINTK (KERN_DEBUG "%s: stopping short at "
-					 "channel command (%02x)\n",
+				pr_debug("%s: stopping short at channel command (%02x)\n",
 					 port->name, byte);
 				goto out;
 			}
 			else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE)
-				DPRINTK (KERN_DEBUG "%s: device illegally "
-					 "using RLE; accepting anyway\n",
+				pr_debug("%s: device illegally using RLE; accepting anyway\n",
 					 port->name);
 
 			rle_count = byte + 1;
 
 			/* Are we allowed to read that many bytes? */
 			if (rle_count > (len - count)) {
-				DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes "
-					 "for next time\n", port->name,
-					 rle_count);
+				pr_debug("%s: leaving %d RLE bytes for next time\n",
+					 port->name, rle_count);
 				break;
 			}
 
@@ -596,7 +576,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
 					     PARPORT_STATUS_ACK)) {
 			/* It's gone wrong.  Return what data we have
                            to the caller. */
-			DPRINTK (KERN_DEBUG "ECP read timed out at 45\n");
+			pr_debug("ECP read timed out at 45\n");
 
 			if (command)
 				printk (KERN_WARNING
@@ -620,7 +600,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
 			memset (buf, byte, rle_count);
 			buf += rle_count;
 			count += rle_count;
-			DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n",
+			pr_debug("%s: decompressed to %d bytes\n",
 				 port->name, rle_count);
 		} else {
 			/* Normal data byte. */
@@ -686,7 +666,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
 		}
 
 		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
-		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+		pr_debug("%s: ECP transfer stalled!\n", port->name);
 
 		parport_frob_control (port, PARPORT_CONTROL_INIT,
 				      PARPORT_CONTROL_INIT);
@@ -702,8 +682,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
 		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
 			break;
 
-		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
-			 port->name);
+		pr_debug("%s: Host transfer recovered\n", port->name);
 
 		if (time_after_eq (jiffies, expire)) break;
 		goto try_again;