Merge tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "The interesting things here are:

   - Turn on Config Request Retry Status Software Visibility.  This
     caused hangs last time, but we included a fix this time.
   - Rework PCI device configuration to use _HPP/_HPX more aggressively
   - Allow PCI devices to be put into D3cold during system suspend
   - Add arm64 PCI support
   - Add APM X-Gene host bridge driver
   - Add TI Keystone host bridge driver
   - Add Xilinx AXI host bridge driver

  More detailed summary:

  Enumeration
    - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
    - Enable Config Request Retry Status when supported (Rajat Jain)
    - Add generic domain handling (Catalin Marinas)
    - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)

  Resource management
    - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
    - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)

  PCI device hotplug
    - Prevent NULL dereference during pciehp probe (Andreas Noever)
    - Move _HPP & _HPX handling into core (Bjorn Helgaas)
    - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
    - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
    - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
    - Fix wait time in pciehp timeout message (Yinghai Lu)
    - Add more pciehp Slot Control debug output (Yinghai Lu)
    - Stop disabling pciehp notifications during init (Yinghai Lu)

  MSI
    - Remove arch_msi_check_device() (Alexander Gordeev)
    - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
    - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
    - Remove unused kobject from struct msi_desc (Yijing Wang)
    - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
    - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
    - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
    - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
    - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)

  Power management
    - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
    - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)

  AER
    - Add additional AER error strings (Gong Chen)
    - Make <linux/aer.h> standalone includable (Thierry Reding)

  Virtualization
    - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
    - Add ACS quirk for Intel 10G NICs (Alex Williamson)
    - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
    - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
    - Add device flag helpers (Ethan Zhao)
    - Assume all Mellanox devices have broken INTx masking (Gavin Shan)

  Generic host bridge driver
    - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
    - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
    - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
    - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
    - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
    - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
    - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
    - Add arm64 architectural support for PCI (Liviu Dudau)

  APM X-Gene
    - Add APM X-Gene PCIe driver (Tanmay Inamdar)
    - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)

  Freescale i.MX6
    - Probe in module_init(), not fs_initcall() (Lucas Stach)
    - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)

  Marvell MVEBU
    - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)

  NVIDIA Tegra
    - Make sure the PCIe PLL is really reset (Eric Yuen)
    - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
    - Fix extended configuration space mapping (Peter Daifuku)
    - Implement resource hierarchy (Thierry Reding)
    - Clear CLKREQ# enable on port disable (Thierry Reding)
    - Add Tegra124 support (Thierry Reding)

  ST Microelectronics SPEAr13xx
    - Pass config resource through reg property (Pratyush Anand)

  Synopsys DesignWare
    - Use NULL instead of false (Fabio Estevam)
    - Parse bus-range property from devicetree (Lucas Stach)
    - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
    - Remove pci_assign_unassigned_resources() (Lucas Stach)
    - Check private_data validity in single place (Lucas Stach)
    - Setup and clear exactly one MSI at a time (Lucas Stach)
    - Remove open-coded bitmap operations (Lucas Stach)
    - Fix configuration base address when using 'reg' (Minghuan Lian)
    - Fix IO resource end address calculation (Minghuan Lian)
    - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
    - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
    - Add support for v3.65 hardware (Murali Karicheri)
    - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)

  TI Keystone
    - Add TI Keystone PCIe driver (Murali Karicheri)
    - Limit MRSS for all downstream devices (Murali Karicheri)
    - Assume controller is already in RC mode (Murali Karicheri)
    - Set device ID based on SoC to support multiple ports (Murali Karicheri)

  Xilinx AXI
    - Add Xilinx AXI PCIe driver (Srikanth Thokala)
    - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)

  Miscellaneous
    - Clean up whitespace (Quentin Lambert)
    - Remove assignments from "if" conditions (Quentin Lambert)
    - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
    - x86: Mark DMI tables as initialization data (Mathias Krause)
    - x86: Move __init annotation to the correct place (Mathias Krause)
    - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
    - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
    - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
    - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
    - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)"

* tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits)
  arm64: dts: Add APM X-Gene PCIe device tree nodes
  PCI: Add ACS quirk for AMD A88X southbridge devices
  PCI: xgene: Add APM X-Gene PCIe driver
  PCI: designware: Remove open-coded bitmap operations
  PCI/MSI: Remove unnecessary temporary variable
  PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()
  MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg()
  PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg()
  PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints
  PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib
  PCI/MSI: Remove unused kobject from struct msi_desc
  PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()
  PCI/MSI: Move D0 check into pci_msi_check_device()
  PCI/MSI: Remove arch_msi_check_device()
  irqchip: armada-370-xp: Remove arch_msi_check_device()
  PCI/MSI/PPC: Remove arch_msi_check_device()
  arm64: Add architectural support for PCI
  PCI: Add pci_remap_iospace() to map bus I/O resources
  of/pci: Add support for parsing PCI host bridge resources from DT
  of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()
  ...

Conflicts:
	arch/arm64/boot/dts/apm-storm.dtsi

2 files changed, 296 insertions, 0 deletions

diff --git a/drivers/of/address.c b/drivers/of/address.c
index e3718250d66e..afdb78299f61 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -5,6 +5,8 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/pci_regs.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 
 /* Max address size we deal with */
@@ -293,6 +295,51 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 }
 EXPORT_SYMBOL_GPL(of_pci_range_parser_one);
 
+/*
+ * of_pci_range_to_resource - Create a resource from an of_pci_range
+ * @range:	the PCI range that describes the resource
+ * @np:		device node where the range belongs to
+ * @res:	pointer to a valid resource that will be updated to
+ *              reflect the values contained in the range.
+ *
+ * Returns EINVAL if the range cannot be converted to resource.
+ *
+ * Note that if the range is an IO range, the resource will be converted
+ * using pci_address_to_pio() which can fail if it is called too early or
+ * if the range cannot be matched to any host bridge IO space (our case here).
+ * To guard against that we try to register the IO range first.
+ * If that fails we know that pci_address_to_pio() will do too.
+ */
+int of_pci_range_to_resource(struct of_pci_range *range,
+			     struct device_node *np, struct resource *res)
+{
+	int err;
+	res->flags = range->flags;
+	res->parent = res->child = res->sibling = NULL;
+	res->name = np->full_name;
+
+	if (res->flags & IORESOURCE_IO) {
+		unsigned long port;
+		err = pci_register_io_range(range->cpu_addr, range->size);
+		if (err)
+			goto invalid_range;
+		port = pci_address_to_pio(range->cpu_addr);
+		if (port == (unsigned long)-1) {
+			err = -EINVAL;
+			goto invalid_range;
+		}
+		res->start = port;
+	} else {
+		res->start = range->cpu_addr;
+	}
+	res->end = res->start + range->size - 1;
+	return 0;
+
+invalid_range:
+	res->start = (resource_size_t)OF_BAD_ADDR;
+	res->end = (resource_size_t)OF_BAD_ADDR;
+	return err;
+}
 #endif /* CONFIG_PCI */
 
 /*
@@ -601,12 +648,119 @@ const __be32 *of_get_address(struct device_node *dev, int index, u64 *size,
 }
 EXPORT_SYMBOL(of_get_address);
 
+#ifdef PCI_IOBASE
+struct io_range {
+	struct list_head list;
+	phys_addr_t start;
+	resource_size_t size;
+};
+
+static LIST_HEAD(io_range_list);
+static DEFINE_SPINLOCK(io_range_lock);
+#endif
+
+/*
+ * Record the PCI IO range (expressed as CPU physical address + size).
+ * Return a negative value if an error has occured, zero otherwise
+ */
+int __weak pci_register_io_range(phys_addr_t addr, resource_size_t size)
+{
+	int err = 0;
+
+#ifdef PCI_IOBASE
+	struct io_range *range;
+	resource_size_t allocated_size = 0;
+
+	/* check if the range hasn't been previously recorded */
+	spin_lock(&io_range_lock);
+	list_for_each_entry(range, &io_range_list, list) {
+		if (addr >= range->start && addr + size <= range->start + size) {
+			/* range already registered, bail out */
+			goto end_register;
+		}
+		allocated_size += range->size;
+	}
+
+	/* range not registed yet, check for available space */
+	if (allocated_size + size - 1 > IO_SPACE_LIMIT) {
+		/* if it's too big check if 64K space can be reserved */
+		if (allocated_size + SZ_64K - 1 > IO_SPACE_LIMIT) {
+			err = -E2BIG;
+			goto end_register;
+		}
+
+		size = SZ_64K;
+		pr_warn("Requested IO range too big, new size set to 64K\n");
+	}
+
+	/* add the range to the list */
+	range = kzalloc(sizeof(*range), GFP_KERNEL);
+	if (!range) {
+		err = -ENOMEM;
+		goto end_register;
+	}
+
+	range->start = addr;
+	range->size = size;
+
+	list_add_tail(&range->list, &io_range_list);
+
+end_register:
+	spin_unlock(&io_range_lock);
+#endif
+
+	return err;
+}
+
+phys_addr_t pci_pio_to_address(unsigned long pio)
+{
+	phys_addr_t address = (phys_addr_t)OF_BAD_ADDR;
+
+#ifdef PCI_IOBASE
+	struct io_range *range;
+	resource_size_t allocated_size = 0;
+
+	if (pio > IO_SPACE_LIMIT)
+		return address;
+
+	spin_lock(&io_range_lock);
+	list_for_each_entry(range, &io_range_list, list) {
+		if (pio >= allocated_size && pio < allocated_size + range->size) {
+			address = range->start + pio - allocated_size;
+			break;
+		}
+		allocated_size += range->size;
+	}
+	spin_unlock(&io_range_lock);
+#endif
+
+	return address;
+}
+
 unsigned long __weak pci_address_to_pio(phys_addr_t address)
 {
+#ifdef PCI_IOBASE
+	struct io_range *res;
+	resource_size_t offset = 0;
+	unsigned long addr = -1;
+
+	spin_lock(&io_range_lock);
+	list_for_each_entry(res, &io_range_list, list) {
+		if (address >= res->start && address < res->start + res->size) {
+			addr = res->start - address + offset;
+			break;
+		}
+		offset += res->size;
+	}
+	spin_unlock(&io_range_lock);
+
+	return addr;
+#else
 	if (address > IO_SPACE_LIMIT)
 		return (unsigned long)-1;
 
 	return (unsigned long) address;
+#endif
 }
 
 static int __of_address_to_resource(struct device_node *dev,
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 848199633798..8882b467be95 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -1,7 +1,9 @@
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/slab.h>
 
 static inline int __of_pci_pci_compare(struct device_node *node,
 				       unsigned int data)
@@ -89,6 +91,146 @@ int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
 }
 EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
 
+/**
+ * This function will try to obtain the host bridge domain number by
+ * finding a property called "linux,pci-domain" of the given device node.
+ *
+ * @node: device tree node with the domain information
+ *
+ * Returns the associated domain number from DT in the range [0-0xffff], or
+ * a negative value if the required property is not found.
+ */
+int of_get_pci_domain_nr(struct device_node *node)
+{
+	const __be32 *value;
+	int len;
+	u16 domain;
+
+	value = of_get_property(node, "linux,pci-domain", &len);
+	if (!value || len < sizeof(*value))
+		return -EINVAL;
+
+	domain = (u16)be32_to_cpup(value);
+
+	return domain;
+}
+EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
+
+#if defined(CONFIG_OF_ADDRESS)
+/**
+ * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
+ * @dev: device node of the host bridge having the range property
+ * @busno: bus number associated with the bridge root bus
+ * @bus_max: maximum number of buses for this bridge
+ * @resources: list where the range of resources will be added after DT parsing
+ * @io_base: pointer to a variable that will contain on return the physical
+ * address for the start of the I/O range. Can be NULL if the caller doesn't
+ * expect IO ranges to be present in the device tree.
+ *
+ * It is the caller's job to free the @resources list.
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping based on its content. It is expected
+ * that the property conforms with the Power ePAPR document.
+ *
+ * It returns zero if the range parsing has been successful or a standard error
+ * value if it failed.
+ */
+int of_pci_get_host_bridge_resources(struct device_node *dev,
+			unsigned char busno, unsigned char bus_max,
+			struct list_head *resources, resource_size_t *io_base)
+{
+	struct resource *res;
+	struct resource *bus_range;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+	char range_type[4];
+	int err;
+
+	if (io_base)
+		*io_base = (resource_size_t)OF_BAD_ADDR;
+
+	bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL);
+	if (!bus_range)
+		return -ENOMEM;
+
+	pr_info("PCI host bridge %s ranges:\n", dev->full_name);
+
+	err = of_pci_parse_bus_range(dev, bus_range);
+	if (err) {
+		bus_range->start = busno;
+		bus_range->end = bus_max;
+		bus_range->flags = IORESOURCE_BUS;
+		pr_info("  No bus range found for %s, using %pR\n",
+			dev->full_name, bus_range);
+	} else {
+		if (bus_range->end > bus_range->start + bus_max)
+			bus_range->end = bus_range->start + bus_max;
+	}
+	pci_add_resource(resources, bus_range);
+
+	/* Check for ranges property */
+	err = of_pci_range_parser_init(&parser, dev);
+	if (err)
+		goto parse_failed;
+
+	pr_debug("Parsing ranges property...\n");
+	for_each_of_pci_range(&parser, &range) {
+		/* Read next ranges element */
+		if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
+			snprintf(range_type, 4, " IO");
+		else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
+			snprintf(range_type, 4, "MEM");
+		else
+			snprintf(range_type, 4, "err");
+		pr_info("  %s %#010llx..%#010llx -> %#010llx\n", range_type,
+			range.cpu_addr, range.cpu_addr + range.size - 1,
+			range.pci_addr);
+
+		/*
+		 * If we failed translation or got a zero-sized region
+		 * then skip this range
+		 */
+		if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
+			continue;
+
+		res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+		if (!res) {
+			err = -ENOMEM;
+			goto parse_failed;
+		}
+
+		err = of_pci_range_to_resource(&range, dev, res);
+		if (err)
+			goto conversion_failed;
+
+		if (resource_type(res) == IORESOURCE_IO) {
+			if (!io_base) {
+				pr_err("I/O range found for %s. Please provide an io_base pointer to save CPU base address\n",
+					dev->full_name);
+				err = -EINVAL;
+				goto conversion_failed;
+			}
+			if (*io_base != (resource_size_t)OF_BAD_ADDR)
+				pr_warn("More than one I/O resource converted for %s. CPU base address for old range lost!\n",
+					dev->full_name);
+			*io_base = range.cpu_addr;
+		}
+
+		pci_add_resource_offset(resources, res,	res->start - range.pci_addr);
+	}
+
+	return 0;
+
+conversion_failed:
+	kfree(res);
+parse_failed:
+	pci_free_resource_list(resources);
+	return err;
+}
+EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
+#endif /* CONFIG_OF_ADDRESS */
+
 #ifdef CONFIG_PCI_MSI
 
 static LIST_HEAD(of_pci_msi_chip_list);