Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:

 - a few MM remainders

 - misc things

 - autofs updates

 - signals

 - affs updates

 - ipc

 - nilfs2

 - spelling.txt updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
  mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()
  mm: add arch-independent testcases for RODATA
  hfs: atomically read inode size
  mm: clarify mm_struct.mm_{users,count} documentation
  mm: use mmget_not_zero() helper
  mm: add new mmget() helper
  mm: add new mmgrab() helper
  checkpatch: warn when formats use %Z and suggest %z
  lib/vsprintf.c: remove %Z support
  scripts/spelling.txt: add some typo-words
  scripts/spelling.txt: add "followings" pattern and fix typo instances
  scripts/spelling.txt: add "therfore" pattern and fix typo instances
  scripts/spelling.txt: add "overwriten" pattern and fix typo instances
  scripts/spelling.txt: add "overwritting" pattern and fix typo instances
  scripts/spelling.txt: add "deintialize(d)" pattern and fix typo instances
  scripts/spelling.txt: add "disassocation" pattern and fix typo instances
  scripts/spelling.txt: add "omited" pattern and fix typo instances
  scripts/spelling.txt: add "explictely" pattern and fix typo instances
  scripts/spelling.txt: add "applys" pattern and fix typo instances
  scripts/spelling.txt: add "configuartion" pattern and fix typo instances
  ...

29 files changed, 59 insertions, 61 deletions

diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 6ea963e3b89a..62ee439d5882 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -123,7 +123,7 @@ static int __init arcnet_init(void)
 		arc_proto_map[count] = arc_proto_default;
 
 	if (BUGLVL(D_DURING))
-		pr_info("struct sizes: %Zd %Zd %Zd %Zd %Zd\n",
+		pr_info("struct sizes: %zd %zd %zd %zd %zd\n",
 			sizeof(struct arc_hardware),
 			sizeof(struct arc_rfc1201),
 			sizeof(struct arc_rfc1051),
diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index a81731303730..a9ac58c351a0 100644
--- a/drivers/net/ethernet/adi/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -1206,7 +1206,7 @@ static void bfin_mac_rx(struct bfin_mac_local *lp)
 	/* reserve 2 bytes for RXDWA padding */
 	skb_reserve(new_skb, NET_IP_ALIGN);
 	/* Invalidate the data cache of skb->data range when it is write back
-	 * cache. It will prevent overwritting the new data from DMA
+	 * cache. It will prevent overwriting the new data from DMA
 	 */
 	blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
 					 (unsigned long)new_skb->end);
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 0ee6e208aa07..50d88d3e03b6 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -817,7 +817,7 @@ static void bcm_enet_adjust_phy_link(struct net_device *dev)
 			rx_pause_en = 1;
 			tx_pause_en = 1;
 		} else if (!priv->pause_auto) {
-			/* pause setting overrided by user */
+			/* pause setting overridden by user */
 			rx_pause_en = priv->pause_rx;
 			tx_pause_en = priv->pause_tx;
 		} else {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 05356efdbf93..b209b7f6093e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -6957,7 +6957,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 			 * hence its link is expected to be down
 			 * - SECOND_PHY means that first phy should not be able
 			 * to link up by itself (using configuration)
-			 * - DEFAULT should be overriden during initialiazation
+			 * - DEFAULT should be overridden during initialization
 			 */
 				DP(NETIF_MSG_LINK, "Invalid link indication"
 					   "mpc=0x%x. DISABLING LINK !!!\n",
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 016d481c6476..30606b11b128 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -1622,7 +1622,7 @@ static void macb_init_rx_buffer_size(struct macb *bp, size_t size)
 		}
 	}
 
-	netdev_dbg(bp->dev, "mtu [%u] rx_buffer_size [%Zu]\n",
+	netdev_dbg(bp->dev, "mtu [%u] rx_buffer_size [%zu]\n",
 		   bp->dev->mtu, bp->rx_buffer_size);
 }
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index acc231293e4d..f6e739da7bb7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -1416,7 +1416,7 @@ static unsigned int xdigit2int(unsigned char c)
  * <pattern data>[/<pattern mask>][@<anchor>]
  *
  * Up to 2 filter patterns can be specified.  If 2 are supplied the first one
- * must be anchored at 0.  An omited mask is taken as a mask of 1s, an omitted
+ * must be anchored at 0.  An omitted mask is taken as a mask of 1s, an omitted
  * anchor is taken as 0.
  */
 static ssize_t mps_trc_write(struct file *file, const char __user *buf,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index cbbf8648307a..78460c52b7c4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -847,9 +847,7 @@ static void i40e_free_vf_res(struct i40e_vf *vf)
 		wr32(hw, reg_idx, reg);
 		i40e_flush(hw);
 	}
-	/* reset some of the state varibles keeping
-	 * track of the resources
-	 */
+	/* reset some of the state variables keeping track of the resources */
 	vf->num_queue_pairs = 0;
 	vf->vf_states = 0;
 	clear_bit(I40E_VF_STAT_INIT, &vf->vf_states);
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 2788a5409023..68812d783f33 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -294,7 +294,7 @@ s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
 	u32 i, i2ccmd = 0;
 	u16 phy_data_swapped;
 
-	/* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/
+	/* Prevent overwriting SFP I2C EEPROM which is at A0 address.*/
 	if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) {
 		hw_dbg("PHY I2C Address %d is out of range.\n",
 			  hw->phy.addr);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 30535e6b68f0..c8ac46049f34 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -1449,7 +1449,7 @@ do { \
  *  @atr_input: input bitstream to compute the hash on
  *  @input_mask: mask for the input bitstream
  *
- *  This function serves two main purposes.  First it applys the input_mask
+ *  This function serves two main purposes.  First it applies the input_mask
  *  to the atr_input resulting in a cleaned up atr_input data stream.
  *  Secondly it computes the hash and stores it in the bkt_hash field at
  *  the end of the input byte stream.  This way it will be available for
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index ee38c18c2d2d..ee1c78abab0b 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -1251,10 +1251,10 @@ struct ksz_port_info {
  * @tx_size:		Transmit data size.  Used for TX optimization.
  * 			The maximum is defined by MAX_TX_HELD_SIZE.
  * @perm_addr:		Permanent MAC address.
- * @override_addr:	Overrided MAC address.
+ * @override_addr:	Overridden MAC address.
  * @address:		Additional MAC address entries.
  * @addr_list_size:	Additional MAC address list size.
- * @mac_override:	Indication of MAC address overrided.
+ * @mac_override:	Indication of MAC address overridden.
  * @promiscuous:	Counter to keep track of promiscuous mode set.
  * @all_multi:		Counter to keep track of all multicast mode set.
  * @multi_list:		Multicast address entries.
@@ -4042,7 +4042,7 @@ static int empty_addr(u8 *addr)
  * @hw: 	The hardware instance.
  *
  * This routine programs the MAC address of the hardware when the address is
- * overrided.
+ * overridden.
  */
 static void hw_set_addr(struct ksz_hw *hw)
 {
@@ -7043,7 +7043,7 @@ static int pcidev_init(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (macaddr[0] != ':')
 		get_mac_addr(hw_priv, macaddr, MAIN_PORT);
 
-	/* Read MAC address and initialize override address if not overrided. */
+	/* Read MAC address and initialize override address if not overridden. */
 	hw_read_addr(hw);
 
 	/* Multiple device interfaces mode requires a second MAC address. */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 99b187bfdd55..718bf58a7da6 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -178,7 +178,7 @@ const u32 qlcnic_83xx_reg_tbl[] = {
 	0x3540,		/* Device state, DRV_REG1 */
 	0x3544,		/* Driver state, DRV_REG2 */
 	0x3548,		/* Driver scratch, DRV_REG3 */
-	0x354C,		/* Device partiton info, DRV_REG4 */
+	0x354C,		/* Device partition info, DRV_REG4 */
 	0x3524,		/* Driver IDC ver, DRV_REG5 */
 	0x3550,		/* FW_VER_MAJOR */
 	0x3554,		/* FW_VER_MINOR */
diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h
index 47ced8a898ca..91fb54fd03d9 100644
--- a/drivers/net/ethernet/sfc/mcdi_pcol.h
+++ b/drivers/net/ethernet/sfc/mcdi_pcol.h
@@ -10832,7 +10832,7 @@
 
 /***********************************/
 /* MC_CMD_GET_LICENSED_V3_FEATURE_STATES
- * Query the state of an one or more licensed features. (Note that the actual
+ * Query the state of one or more licensed features. (Note that the actual
  * state may be invalidated by the MC_CMD_LICENSING_V3 OP_UPDATE_LICENSE
  * operation or a reboot of the MC.) Used for V3 licensing (Medford)
  */
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 19a458716f1a..1b6f6171d078 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -176,7 +176,7 @@ struct sis900_private {
 
 	u32 msg_enable;
 
-	unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */
+	unsigned int cur_rx, dirty_rx; /* producer/consumer pointers for Tx/Rx ring */
 	unsigned int cur_tx, dirty_tx;
 
 	/* The saved address of a sent/receive-in-place packet buffer */
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index bda0c6413450..89698741682f 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1330,7 +1330,7 @@ static int __init gtp_init(void)
 	if (err < 0)
 		goto unreg_genl_family;
 
-	pr_info("GTP module loaded (pdp ctx size %Zd bytes)\n",
+	pr_info("GTP module loaded (pdp ctx size %zd bytes)\n",
 		sizeof(struct pdp_ctx));
 	return 0;
 
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
index 3e37724d30ae..8aefb282c862 100644
--- a/drivers/net/usb/kalmia.c
+++ b/drivers/net/usb/kalmia.c
@@ -343,7 +343,7 @@ static const struct driver_info kalmia_info = {
 static const struct usb_device_id products[] = {
 	/* The unswitched USB ID, to get the module auto loaded: */
 	{ USB_DEVICE(0x04e8, 0x689a) },
-	/* The stick swithed into modem (by e.g. usb_modeswitch): */
+	/* The stick switched into modem (by e.g. usb_modeswitch): */
 	{ USB_DEVICE(0x04e8, 0x6889),
 		.driver_info = (unsigned long) &kalmia_info, },
 	{ /* EMPTY == end of list */} };
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 4f4f71b2966b..c5b21138b7eb 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -383,7 +383,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
 
 	/* REVISIT:  peripheral "alignment" request is ignored ... */
 	dev_dbg(&intf->dev,
-		"hard mtu %u (%u from dev), rx buflen %Zu, align %d\n",
+		"hard mtu %u (%u from dev), rx buflen %zu, align %d\n",
 		dev->hard_mtu, tmp, dev->rx_urb_size,
 		1 << le32_to_cpu(u.init_c->packet_alignment));
 
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index d9440bc022f2..ac69f28d92d2 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -379,7 +379,7 @@ static int sierra_net_parse_lsi(struct usbnet *dev, char *data, int datalen)
 	u32 expected_length;
 
 	if (datalen < sizeof(struct lsi_umts_single)) {
-		netdev_err(dev->net, "%s: Data length %d, exp >= %Zu\n",
+		netdev_err(dev->net, "%s: Data length %d, exp >= %zu\n",
 			   __func__, datalen, sizeof(struct lsi_umts_single));
 		return -1;
 	}
diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c
index e74664b84925..502c346aa790 100644
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -237,7 +237,7 @@ void __i2400mu_bm_notif_cb(struct urb *urb)
  *
  * @i2400m: device descriptor
  * @urb: urb to use
- * @completion: completion varible to complete when done
+ * @completion: completion variable to complete when done
  *
  * Data is always read to i2400m->bm_ack_buf
  */
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 815efe9fd208..5214dd7a3936 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = {
 /*
  * MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm.
  * With OFDM for single stream you just add up all antenna inputs, you're
- * only interested in what you get after FFT. Signal aligment is also not
+ * only interested in what you get after FFT. Signal alignment is also not
  * required for OFDM because any phase difference adds up in the frequency
  * domain.
  *
  * MRC requires extra work for use with CCK. You need to align the antenna
  * signals from the different antenna before you can add the signals together.
- * You need aligment of signals as CCK is in time domain, so addition can cancel
+ * You need alignment of signals as CCK is in time domain, so addition can cancel
  * your signal completely if phase is 180 degrees (think of adding sine waves).
  * You also need to remove noise before the addition and this is where ANI
  * MRC CCK comes into play. One of the antenna inputs may be stronger but
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 10098b7586f3..944b83cfc519 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -4874,7 +4874,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		kfree(af_params);
 	} else {
 		brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control);
-		brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len);
+		brcmf_dbg_hex_dump(true, buf, len, "payload, len=%zu\n", len);
 	}
 
 exit:
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
index 356aba9d3d53..f922859acf40 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
@@ -1238,7 +1238,7 @@ static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
 }
 
 /*
- * Start firmware execution after power on and intialization
+ * Start firmware execution after power on and initialization
  * The sequence is:
  *  1. Release ARC
  *  2. Wait for f/w initialization completes;
@@ -1277,7 +1277,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
 	/* Release ARC - clear reset bit */
 	write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
 
-	/* wait for f/w intialization complete */
+	/* wait for f/w initialization complete */
 	IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
 	i = 5000;
 	do {
@@ -5652,7 +5652,7 @@ static void shim__set_security(struct net_device *dev,
 
 /* As a temporary work around to enable WPA until we figure out why
  * wpa_supplicant toggles the security capability of the driver, which
- * forces a disassocation with force_update...
+ * forces a disassociation with force_update...
  *
  *	if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
 	if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
index ef9af8a29cad..5ef3c5cc47c5 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
@@ -3974,7 +3974,7 @@ static void ipw_send_disassociate(struct ipw_priv *priv, int quiet)
 		return;
 	}
 
-	IPW_DEBUG_ASSOC("Disassocation attempt from %pM "
+	IPW_DEBUG_ASSOC("Disassociation attempt from %pM "
 			"on channel %d.\n",
 			priv->assoc_request.bssid,
 			priv->assoc_request.channel);
@@ -5196,7 +5196,7 @@ static void ipw_rx_queue_restock(struct ipw_priv *priv)
  * Move all used packet from rx_used to rx_free, allocating a new SKB for each.
  * Also restock the Rx queue via ipw_rx_queue_restock.
  *
- * This is called as a scheduled work item (except for during intialization)
+ * This is called as a scheduled work item (except for during initialization)
  */
 static void ipw_rx_queue_replenish(void *data)
 {
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
index a91d170a614b..2781f5728d07 100644
--- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
@@ -4855,39 +4855,39 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
 	 */
 
 	D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
-	D_INFO("f/w package hdr runtime inst size = %Zd\n", pieces.inst_size);
-	D_INFO("f/w package hdr runtime data size = %Zd\n", pieces.data_size);
-	D_INFO("f/w package hdr init inst size = %Zd\n", pieces.init_size);
-	D_INFO("f/w package hdr init data size = %Zd\n", pieces.init_data_size);
-	D_INFO("f/w package hdr boot inst size = %Zd\n", pieces.boot_size);
+	D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size);
+	D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size);
+	D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size);
+	D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size);
+	D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size);
 
 	/* Verify that uCode images will fit in card's SRAM */
 	if (pieces.inst_size > il->hw_params.max_inst_size) {
-		IL_ERR("uCode instr len %Zd too large to fit in\n",
+		IL_ERR("uCode instr len %zd too large to fit in\n",
 		       pieces.inst_size);
 		goto try_again;
 	}
 
 	if (pieces.data_size > il->hw_params.max_data_size) {
-		IL_ERR("uCode data len %Zd too large to fit in\n",
+		IL_ERR("uCode data len %zd too large to fit in\n",
 		       pieces.data_size);
 		goto try_again;
 	}
 
 	if (pieces.init_size > il->hw_params.max_inst_size) {
-		IL_ERR("uCode init instr len %Zd too large to fit in\n",
+		IL_ERR("uCode init instr len %zd too large to fit in\n",
 		       pieces.init_size);
 		goto try_again;
 	}
 
 	if (pieces.init_data_size > il->hw_params.max_data_size) {
-		IL_ERR("uCode init data len %Zd too large to fit in\n",
+		IL_ERR("uCode init data len %zd too large to fit in\n",
 		       pieces.init_data_size);
 		goto try_again;
 	}
 
 	if (pieces.boot_size > il->hw_params.max_bsm_size) {
-		IL_ERR("uCode boot instr len %Zd too large to fit in\n",
+		IL_ERR("uCode boot instr len %zd too large to fit in\n",
 		       pieces.boot_size);
 		goto try_again;
 	}
@@ -4938,7 +4938,7 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
 	/* Copy images into buffers for card's bus-master reads ... */
 
 	/* Runtime instructions (first block of data in file) */
-	D_INFO("Copying (but not loading) uCode instr len %Zd\n",
+	D_INFO("Copying (but not loading) uCode instr len %zd\n",
 	       pieces.inst_size);
 	memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);
 
@@ -4949,28 +4949,28 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
 	 * Runtime data
 	 * NOTE:  Copy into backup buffer will be done in il_up()
 	 */
-	D_INFO("Copying (but not loading) uCode data len %Zd\n",
+	D_INFO("Copying (but not loading) uCode data len %zd\n",
 	       pieces.data_size);
 	memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
 	memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
 
 	/* Initialization instructions */
 	if (pieces.init_size) {
-		D_INFO("Copying (but not loading) init instr len %Zd\n",
+		D_INFO("Copying (but not loading) init instr len %zd\n",
 		       pieces.init_size);
 		memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
 	}
 
 	/* Initialization data */
 	if (pieces.init_data_size) {
-		D_INFO("Copying (but not loading) init data len %Zd\n",
+		D_INFO("Copying (but not loading) init data len %zd\n",
 		       pieces.init_data_size);
 		memcpy(il->ucode_init_data.v_addr, pieces.init_data,
 		       pieces.init_data_size);
 	}
 
 	/* Bootstrap instructions */
-	D_INFO("Copying (but not loading) boot instr len %Zd\n",
+	D_INFO("Copying (but not loading) boot instr len %zd\n",
 	       pieces.boot_size);
 	memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
 
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 0e0293d42b5d..be466a074c1d 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1141,21 +1141,21 @@ static int validate_sec_sizes(struct iwl_drv *drv,
 			      struct iwl_firmware_pieces *pieces,
 			      const struct iwl_cfg *cfg)
 {
-	IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n",
+	IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %zd\n",
 		get_sec_size(pieces, IWL_UCODE_REGULAR,
 			     IWL_UCODE_SECTION_INST));
-	IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n",
+	IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %zd\n",
 		get_sec_size(pieces, IWL_UCODE_REGULAR,
 			     IWL_UCODE_SECTION_DATA));
-	IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n",
+	IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %zd\n",
 		get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST));
-	IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n",
+	IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %zd\n",
 		get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA));
 
 	/* Verify that uCode images will fit in card's SRAM. */
 	if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) >
 	    cfg->max_inst_size) {
-		IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n",
+		IWL_ERR(drv, "uCode instr len %zd too large to fit in\n",
 			get_sec_size(pieces, IWL_UCODE_REGULAR,
 				     IWL_UCODE_SECTION_INST));
 		return -1;
@@ -1163,7 +1163,7 @@ static int validate_sec_sizes(struct iwl_drv *drv,
 
 	if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) >
 	    cfg->max_data_size) {
-		IWL_ERR(drv, "uCode data len %Zd too large to fit in\n",
+		IWL_ERR(drv, "uCode data len %zd too large to fit in\n",
 			get_sec_size(pieces, IWL_UCODE_REGULAR,
 				     IWL_UCODE_SECTION_DATA));
 		return -1;
@@ -1171,7 +1171,7 @@ static int validate_sec_sizes(struct iwl_drv *drv,
 
 	if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) >
 	     cfg->max_inst_size) {
-		IWL_ERR(drv, "uCode init instr len %Zd too large to fit in\n",
+		IWL_ERR(drv, "uCode init instr len %zd too large to fit in\n",
 			get_sec_size(pieces, IWL_UCODE_INIT,
 				     IWL_UCODE_SECTION_INST));
 		return -1;
@@ -1179,7 +1179,7 @@ static int validate_sec_sizes(struct iwl_drv *drv,
 
 	if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA) >
 	    cfg->max_data_size) {
-		IWL_ERR(drv, "uCode init data len %Zd too large to fit in\n",
+		IWL_ERR(drv, "uCode init data len %zd too large to fit in\n",
 			get_sec_size(pieces, IWL_UCODE_REGULAR,
 				     IWL_UCODE_SECTION_DATA));
 		return -1;
diff --git a/drivers/net/wireless/marvell/mwifiex/wmm.c b/drivers/net/wireless/marvell/mwifiex/wmm.c
index 28c2f6fae3e6..e4ff3b973850 100644
--- a/drivers/net/wireless/marvell/mwifiex/wmm.c
+++ b/drivers/net/wireless/marvell/mwifiex/wmm.c
@@ -673,8 +673,8 @@ void mwifiex_update_ralist_tx_pause(struct mwifiex_private *priv, u8 *mac,
 	spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
 }
 
-/* This function update non-tdls peer ralist tx_pause while
- * tdls channel swithing
+/* This function updates non-tdls peer ralist tx_pause while
+ * tdls channel switching
  */
 void mwifiex_update_ralist_tx_pause_in_tdls_cs(struct mwifiex_private *priv,
 					       u8 *mac, u8 tx_pause)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
index 1922e78ad6bd..89a0a28b8b20 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
@@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
 	u8 i = 0;
 
 	do {
-		/* 8 - Byte aligment */
+		/* 8 - Byte alignment */
 		len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
 
 		/* Buffer length is not enough */
@@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
 	u8 i = 0;
 
 	do {
-		/* 8 - Byte aligment */
+		/* 8 - Byte alignment */
 		len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
 
 		/* Buffer length is not enough */
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index ef5d394f185b..cc8deecea8cb 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -516,7 +516,7 @@ err:
 
 /**
  * rsi_disconnect() - This function performs the reverse of the probe function,
- *		      it deintialize the driver structure.
+ *		      it deinitialize the driver structure.
  * @pfunction: Pointer to the USB interface structure.
  *
  * Return: None.
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 5bdf7a03e3dd..d1aa3eee0e81 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -178,7 +178,7 @@ static struct wlcore_conf wl18xx_conf = {
 	.sg = {
 		.params = {
 			[WL18XX_CONF_SG_PARAM_0] = 0,
-			/* Configuartion Parameters */
+			/* Configuration Parameters */
 			[WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0,
 			[WL18XX_CONF_SG_ZIGBEE_COEX] = 0,
 			[WL18XX_CONF_SG_TIME_SYNC] = 0,
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index d0b7734030ef..58898b99d3f7 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -544,7 +544,7 @@ static int wl12xx_init_sta_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	return 0;
 }
 
-/* vif-specific intialization */
+/* vif-specific initialization */
 static int wl12xx_init_ap_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 {
 	int ret;