diff options
| author | Kalle Valo <kvalo@codeaurora.org> | 2015-11-18 10:18:44 +0200 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2015-11-18 14:28:31 +0200 |
| commit | 33aca94d797d7a8b6b4911ba02060c4fa9a0c47d (patch) | |
| tree | 8f4b1ce7ac83e747763be157671c5885ed7376d9 /drivers/net/wireless/rt2x00 | |
| parent | 941a967c98362d6ba9a5d8bb6fdc1b70d7179602 (diff) | |
| download | linux-33aca94d797d7a8b6b4911ba02060c4fa9a0c47d.tar.gz | |
rt2x00: move under ralink vendor directory
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/rt2x00')
46 files changed, 0 insertions, 43347 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig deleted file mode 100644 index de62f5dcb62f..000000000000 --- a/drivers/net/wireless/rt2x00/Kconfig +++ /dev/null @@ -1,269 +0,0 @@ -menuconfig RT2X00 - tristate "Ralink driver support" - depends on MAC80211 && HAS_DMA - ---help--- - This will enable the support for the Ralink drivers, - developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. - - These drivers make use of the mac80211 stack. - - When building one of the individual drivers, the rt2x00 library - will also be created. That library (when the driver is built as - a module) will be called rt2x00lib. - - Additionally PCI and USB libraries will also be build depending - on the types of drivers being selected, these libraries will be - called rt2x00pci and rt2x00usb. - -if RT2X00 - -config RT2400PCI - tristate "Ralink rt2400 (PCI/PCMCIA) support" - depends on PCI - select RT2X00_LIB_MMIO - select RT2X00_LIB_PCI - select EEPROM_93CX6 - ---help--- - This adds support for rt2400 wireless chipset family. - Supported chips: RT2460. - - When compiled as a module, this driver will be called rt2400pci. - -config RT2500PCI - tristate "Ralink rt2500 (PCI/PCMCIA) support" - depends on PCI - select RT2X00_LIB_MMIO - select RT2X00_LIB_PCI - select EEPROM_93CX6 - ---help--- - This adds support for rt2500 wireless chipset family. - Supported chips: RT2560. - - When compiled as a module, this driver will be called rt2500pci. - -config RT61PCI - tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" - depends on PCI - select RT2X00_LIB_PCI - select RT2X00_LIB_MMIO - select RT2X00_LIB_FIRMWARE - select RT2X00_LIB_CRYPTO - select CRC_ITU_T - select EEPROM_93CX6 - ---help--- - This adds support for rt2501 wireless chipset family. - Supported chips: RT2561, RT2561S & RT2661. - - When compiled as a module, this driver will be called rt61pci. - -config RT2800PCI - tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support" - depends on PCI - select RT2800_LIB - select RT2800_LIB_MMIO - select RT2X00_LIB_MMIO - select RT2X00_LIB_PCI - select RT2X00_LIB_FIRMWARE - select RT2X00_LIB_CRYPTO - select CRC_CCITT - select EEPROM_93CX6 - ---help--- - This adds support for rt27xx/rt28xx/rt30xx wireless chipset family. - Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890, RT3052, - RT3090, RT3091 & RT3092 - - When compiled as a module, this driver will be called "rt2800pci.ko". - -if RT2800PCI - -config RT2800PCI_RT33XX - bool "rt2800pci - Include support for rt33xx devices" - default y - ---help--- - This adds support for rt33xx wireless chipset family to the - rt2800pci driver. - Supported chips: RT3390 - -config RT2800PCI_RT35XX - bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)" - default y - ---help--- - This adds support for rt35xx wireless chipset family to the - rt2800pci driver. - Supported chips: RT3060, RT3062, RT3562, RT3592 - - -config RT2800PCI_RT53XX - bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)" - default y - ---help--- - This adds support for rt53xx wireless chipset family to the - rt2800pci driver. - Supported chips: RT5390 - -config RT2800PCI_RT3290 - bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)" - default y - ---help--- - This adds support for rt3290 wireless chipset family to the - rt2800pci driver. - Supported chips: RT3290 -endif - -config RT2500USB - tristate "Ralink rt2500 (USB) support" - depends on USB - select RT2X00_LIB_USB - select RT2X00_LIB_CRYPTO - ---help--- - This adds support for rt2500 wireless chipset family. - Supported chips: RT2571 & RT2572. - - When compiled as a module, this driver will be called rt2500usb. - -config RT73USB - tristate "Ralink rt2501/rt73 (USB) support" - depends on USB - select RT2X00_LIB_USB - select RT2X00_LIB_FIRMWARE - select RT2X00_LIB_CRYPTO - select CRC_ITU_T - ---help--- - This adds support for rt2501 wireless chipset family. - Supported chips: RT2571W, RT2573 & RT2671. - - When compiled as a module, this driver will be called rt73usb. - -config RT2800USB - tristate "Ralink rt27xx/rt28xx/rt30xx (USB) support" - depends on USB - select RT2800_LIB - select RT2X00_LIB_USB - select RT2X00_LIB_FIRMWARE - select RT2X00_LIB_CRYPTO - select CRC_CCITT - ---help--- - This adds support for rt27xx/rt28xx/rt30xx wireless chipset family. - Supported chips: RT2770, RT2870 & RT3070, RT3071 & RT3072 - - When compiled as a module, this driver will be called "rt2800usb.ko". - -if RT2800USB - -config RT2800USB_RT33XX - bool "rt2800usb - Include support for rt33xx devices" - default y - ---help--- - This adds support for rt33xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT3370 - -config RT2800USB_RT35XX - bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)" - default y - ---help--- - This adds support for rt35xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT3572 - -config RT2800USB_RT3573 - bool "rt2800usb - Include support for rt3573 devices (EXPERIMENTAL)" - ---help--- - This enables support for RT3573 chipset based wireless USB devices - in the rt2800usb driver. - -config RT2800USB_RT53XX - bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" - ---help--- - This adds support for rt53xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT5370 - -config RT2800USB_RT55XX - bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)" - ---help--- - This adds support for rt55xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT5572 - -config RT2800USB_UNKNOWN - bool "rt2800usb - Include support for unknown (USB) devices" - default n - ---help--- - This adds support for rt2800usb devices that are known to - have a rt28xx family compatible chipset, but for which the exact - chipset is unknown. - - Support status for these devices is unknown, and enabling these - devices may or may not work. - -endif - -config RT2800SOC - tristate "Ralink WiSoC support" - depends on SOC_RT288X || SOC_RT305X - select RT2X00_LIB_SOC - select RT2X00_LIB_MMIO - select RT2X00_LIB_CRYPTO - select RT2X00_LIB_FIRMWARE - select RT2800_LIB - select RT2800_LIB_MMIO - ---help--- - This adds support for Ralink WiSoC devices. - Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352. - - When compiled as a module, this driver will be called rt2800soc. - - -config RT2800_LIB - tristate - -config RT2800_LIB_MMIO - tristate - select RT2X00_LIB_MMIO - select RT2800_LIB - -config RT2X00_LIB_MMIO - tristate - -config RT2X00_LIB_PCI - tristate - select RT2X00_LIB - -config RT2X00_LIB_SOC - tristate - select RT2X00_LIB - -config RT2X00_LIB_USB - tristate - select RT2X00_LIB - -config RT2X00_LIB - tristate - -config RT2X00_LIB_FIRMWARE - bool - select FW_LOADER - -config RT2X00_LIB_CRYPTO - bool - -config RT2X00_LIB_LEDS - bool - default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) - -config RT2X00_LIB_DEBUGFS - bool "Ralink debugfs support" - depends on RT2X00_LIB && MAC80211_DEBUGFS - ---help--- - Enable creation of debugfs files for the rt2x00 drivers. - These debugfs files support both reading and writing of the - most important register types of the rt2x00 hardware. - -config RT2X00_DEBUG - bool "Ralink debug output" - depends on RT2X00_LIB - ---help--- - Enable debugging output for all rt2x00 modules - -endif diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile deleted file mode 100644 index 24a66015a495..000000000000 --- a/drivers/net/wireless/rt2x00/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -rt2x00lib-y += rt2x00dev.o -rt2x00lib-y += rt2x00mac.o -rt2x00lib-y += rt2x00config.o -rt2x00lib-y += rt2x00queue.o -rt2x00lib-y += rt2x00link.o -rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o -rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o -rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o -rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o - -obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o -obj-$(CONFIG_RT2X00_LIB_MMIO) += rt2x00mmio.o -obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o -obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o -obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o -obj-$(CONFIG_RT2800_LIB) += rt2800lib.o -obj-$(CONFIG_RT2800_LIB_MMIO) += rt2800mmio.o -obj-$(CONFIG_RT2400PCI) += rt2400pci.o -obj-$(CONFIG_RT2500PCI) += rt2500pci.o -obj-$(CONFIG_RT61PCI) += rt61pci.o -obj-$(CONFIG_RT2800PCI) += rt2800pci.o -obj-$(CONFIG_RT2500USB) += rt2500usb.o -obj-$(CONFIG_RT73USB) += rt73usb.o -obj-$(CONFIG_RT2800USB) += rt2800usb.o -obj-$(CONFIG_RT2800SOC) += rt2800soc.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c deleted file mode 100644 index 9a3966cd6fbe..000000000000 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ /dev/null @@ -1,1850 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2400pci - Abstract: rt2400pci device specific routines. - Supported chipsets: RT2460. - */ - -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/eeprom_93cx6.h> -#include <linux/slab.h> - -#include "rt2x00.h" -#include "rt2x00mmio.h" -#include "rt2x00pci.h" -#include "rt2400pci.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00mmio_register_read and rt2x00mmio_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attempt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) - -static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBPCSR_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); - - rt2x00mmio_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR21, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); -} - -static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00mmio_register_write(rt2x00dev, CSR21, reg); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2400pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00mmio_register_read, - .write = rt2x00mmio_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2400pci_bbp_read, - .write = rt2400pci_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2400pci_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); - return rt2x00_get_field32(reg, GPIOCSR_VAL0); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2400pci_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - u32 reg; - - rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); - - if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) - rt2x00_set_field32(®, LEDCSR_LINK, enabled); - else if (led->type == LED_TYPE_ACTIVITY) - rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled); - - rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); -} - -static int rt2400pci_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); - rt2x00_set_field32(®, LEDCSR_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, *delay_off); - rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); - - return 0; -} - -static void rt2400pci_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2400pci_brightness_set; - led->led_dev.blink_set = rt2400pci_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2400pci_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * since there is no filter for it at this time. - */ - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DROP_CRC, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); -} - -static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int bcn_preload; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Enable beacon config - */ - bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); - rt2x00mmio_register_read(rt2x00dev, BCNCSR1, ®); - rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); - rt2x00mmio_register_write(rt2x00dev, BCNCSR1, reg); - - /* - * Enable synchronisation. - */ - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - } - - if (flags & CONFIG_UPDATE_MAC) - rt2x00mmio_register_multiwrite(rt2x00dev, CSR3, - conf->mac, sizeof(conf->mac)); - - if (flags & CONFIG_UPDATE_BSSID) - rt2x00mmio_register_multiwrite(rt2x00dev, CSR5, - conf->bssid, - sizeof(conf->bssid)); -} - -static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp, - u32 changed) -{ - int preamble_mask; - u32 reg; - - /* - * When short preamble is enabled, we should set bit 0x08 - */ - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - preamble_mask = erp->short_preamble << 3; - - rt2x00mmio_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x1ff); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0x13a); - rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); - rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 10)); - rt2x00mmio_register_write(rt2x00dev, ARCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR3, ®); - rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); - rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 20)); - rt2x00mmio_register_write(rt2x00dev, ARCSR3, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR4, ®); - rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); - rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 55)); - rt2x00mmio_register_write(rt2x00dev, ARCSR4, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR5, ®); - rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); - rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 110)); - rt2x00mmio_register_write(rt2x00dev, ARCSR5, reg); - } - - if (changed & BSS_CHANGED_BASIC_RATES) - rt2x00mmio_register_write(rt2x00dev, ARCSR1, erp->basic_rates); - - if (changed & BSS_CHANGED_ERP_SLOT) { - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); - rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); - rt2x00mmio_register_write(rt2x00dev, CSR18, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, erp->difs); - rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); - rt2x00mmio_register_write(rt2x00dev, CSR19, reg); - } - - if (changed & BSS_CHANGED_BEACON_INT) { - rt2x00mmio_register_read(rt2x00dev, CSR12, ®); - rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, - erp->beacon_int * 16); - rt2x00mmio_register_write(rt2x00dev, CSR12, reg); - } -} - -static void rt2400pci_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r1; - u8 r4; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - rt2400pci_bbp_read(rt2x00dev, 4, &r4); - rt2400pci_bbp_read(rt2x00dev, 1, &r1); - - /* - * Configure the TX antenna. - */ - switch (ant->tx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - break; - } - - rt2400pci_bbp_write(rt2x00dev, 4, r4); - rt2400pci_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf) -{ - /* - * Switch on tuning bits. - */ - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1); - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1); - - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - /* - * RF2420 chipset don't need any additional actions. - */ - if (rt2x00_rf(rt2x00dev, RF2420)) - return; - - /* - * For the RT2421 chipsets we need to write an invalid - * reference clock rate to activate auto_tune. - * After that we set the value back to the correct channel. - */ - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - msleep(1); - - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - msleep(1); - - /* - * Switch off tuning bits. - */ - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0); - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0); - - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - /* - * Clear false CRC during channel switch. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, &rf->rf1); -} - -static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower) -{ - rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower)); -} - -static void rt2400pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_LONG_RETRY, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, CSR11_SHORT_RETRY, - libconf->conf->short_frame_max_tx_count); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); -} - -static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00mmio_register_read(rt2x00dev, CSR20, ®); - rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, - (rt2x00dev->beacon_int - 20) * 16); - rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, - libconf->conf->listen_interval - 1); - - /* We must first disable autowake before it can be enabled */ - rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - - rt2x00_set_field32(®, CSR20_AUTOWAKE, 1); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - } else { - rt2x00mmio_register_read(rt2x00dev, CSR20, ®); - rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - } - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); -} - -static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2400pci_config_channel(rt2x00dev, &libconf->rf); - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2400pci_config_txpower(rt2x00dev, - libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2400pci_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2400pci_config_ps(rt2x00dev, libconf); -} - -static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev, - const int cw_min, const int cw_max) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_CWMIN, cw_min); - rt2x00_set_field32(®, CSR11_CWMAX, cw_max); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); -} - -/* - * Link tuning - */ -static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - u8 bbp; - - /* - * Update FCS error count from register. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2400pci_bbp_read(rt2x00dev, 39, &bbp); - qual->false_cca = bbp; -} - -static inline void rt2400pci_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level_reg != vgc_level) { - rt2400pci_bbp_write(rt2x00dev, 13, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2400pci_set_vgc(rt2x00dev, qual, 0x08); -} - -static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - /* - * The link tuner should not run longer then 60 seconds, - * and should run once every 2 seconds. - */ - if (count > 60 || !(count & 1)) - return; - - /* - * Base r13 link tuning on the false cca count. - */ - if ((qual->false_cca > 512) && (qual->vgc_level < 0x20)) - rt2400pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level); - else if ((qual->false_cca < 100) && (qual->vgc_level > 0x08)) - rt2400pci_set_vgc(rt2x00dev, qual, --qual->vgc_level); -} - -/* - * Queue handlers. - */ -static void rt2400pci_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 0); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); - rt2x00_set_field32(®, CSR14_TBCN, 1); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - break; - default: - break; - } -} - -static void rt2400pci_kick_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_AC_VI: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_ATIM: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - default: - break; - } -} - -static void rt2400pci_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_ATIM: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_ABORT, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - /* - * Wait for possibly running tbtt tasklets. - */ - tasklet_kill(&rt2x00dev->tbtt_tasklet); - break; - default: - break; - } -} - -/* - * Initialization functions. - */ -static bool rt2400pci_get_entry_state(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - rt2x00_get_field32(word, TXD_W0_VALID)); - } -} - -static void rt2400pci_clear_entry(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 2, &word); - rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len); - rt2x00_desc_write(entry_priv->desc, 2, word); - - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 1, word); - - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); - } -} - -static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev) -{ - struct queue_entry_priv_mmio *entry_priv; - u32 reg; - - /* - * Initialize registers. - */ - rt2x00mmio_register_read(rt2x00dev, TXCSR2, ®); - rt2x00_set_field32(®, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size); - rt2x00_set_field32(®, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit); - rt2x00_set_field32(®, TXCSR2_NUM_ATIM, rt2x00dev->atim->limit); - rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); - rt2x00mmio_register_write(rt2x00dev, TXCSR2, reg); - - entry_priv = rt2x00dev->tx[1].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR3, ®); - rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR3, reg); - - entry_priv = rt2x00dev->tx[0].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR5, ®); - rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR5, reg); - - entry_priv = rt2x00dev->atim->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR4, ®); - rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR4, reg); - - entry_priv = rt2x00dev->bcn->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR6, ®); - rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR6, reg); - - rt2x00mmio_register_read(rt2x00dev, RXCSR1, ®); - rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); - rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); - rt2x00mmio_register_write(rt2x00dev, RXCSR1, reg); - - entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, RXCSR2, reg); - - return 0; -} - -static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_write(rt2x00dev, PSCSR0, 0x00020002); - rt2x00mmio_register_write(rt2x00dev, PSCSR1, 0x00000002); - rt2x00mmio_register_write(rt2x00dev, PSCSR2, 0x00023f20); - rt2x00mmio_register_write(rt2x00dev, PSCSR3, 0x00000002); - - rt2x00mmio_register_read(rt2x00dev, TIMECSR, ®); - rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); - rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); - rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); - rt2x00mmio_register_write(rt2x00dev, TIMECSR, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR9, ®); - rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, - (rt2x00dev->rx->data_size / 128)); - rt2x00mmio_register_write(rt2x00dev, CSR9, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_TCFP, 0); - rt2x00_set_field32(®, CSR14_TATIMW, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0); - rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - rt2x00mmio_register_write(rt2x00dev, CNT3, 0x3f080000); - - rt2x00mmio_register_read(rt2x00dev, ARCSR0, ®); - rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA0, 133); - rt2x00_set_field32(®, ARCSR0_AR_BBP_ID0, 134); - rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA1, 136); - rt2x00_set_field32(®, ARCSR0_AR_BBP_ID1, 135); - rt2x00mmio_register_write(rt2x00dev, ARCSR0, reg); - - rt2x00mmio_register_read(rt2x00dev, RXCSR3, ®); - rt2x00_set_field32(®, RXCSR3_BBP_ID0, 3); /* Tx power.*/ - rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID1, 32); /* Signal */ - rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID2, 36); /* Rssi */ - rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR3, reg); - - rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00mmio_register_write(rt2x00dev, MACCSR0, 0x00217223); - rt2x00mmio_register_write(rt2x00dev, MACCSR1, 0x00235518); - - rt2x00mmio_register_read(rt2x00dev, MACCSR2, ®); - rt2x00_set_field32(®, MACCSR2_DELAY, 64); - rt2x00mmio_register_write(rt2x00dev, MACCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, RALINKCSR, ®); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 154); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 154); - rt2x00mmio_register_write(rt2x00dev, RALINKCSR, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, CSR1_BBP_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 0); - rt2x00mmio_register_write(rt2x00dev, CSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 1); - rt2x00mmio_register_write(rt2x00dev, CSR1, reg); - - /* - * We must clear the FCS and FIFO error count. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, ®); - rt2x00mmio_register_read(rt2x00dev, CNT4, ®); - - return 0; -} - -static int rt2400pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2400pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} - -static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt2400pci_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2400pci_bbp_write(rt2x00dev, 1, 0x00); - rt2400pci_bbp_write(rt2x00dev, 3, 0x27); - rt2400pci_bbp_write(rt2x00dev, 4, 0x08); - rt2400pci_bbp_write(rt2x00dev, 10, 0x0f); - rt2400pci_bbp_write(rt2x00dev, 15, 0x72); - rt2400pci_bbp_write(rt2x00dev, 16, 0x74); - rt2400pci_bbp_write(rt2x00dev, 17, 0x20); - rt2400pci_bbp_write(rt2x00dev, 18, 0x72); - rt2400pci_bbp_write(rt2x00dev, 19, 0x0b); - rt2400pci_bbp_write(rt2x00dev, 20, 0x00); - rt2400pci_bbp_write(rt2x00dev, 28, 0x11); - rt2400pci_bbp_write(rt2x00dev, 29, 0x04); - rt2400pci_bbp_write(rt2x00dev, 30, 0x21); - rt2400pci_bbp_write(rt2x00dev, 31, 0x00); - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2400pci_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int mask = (state == STATE_RADIO_IRQ_OFF); - u32 reg; - unsigned long flags; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00mmio_register_read(rt2x00dev, CSR7, ®); - rt2x00mmio_register_write(rt2x00dev, CSR7, reg); - } - - /* - * Only toggle the interrupts bits we are going to use. - * Non-checked interrupt bits are disabled by default. - */ - spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); - rt2x00_set_field32(®, CSR8_RXDONE, mask); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); - - if (state == STATE_RADIO_IRQ_OFF) { - /* - * Ensure that all tasklets are finished before - * disabling the interrupts. - */ - tasklet_kill(&rt2x00dev->txstatus_tasklet); - tasklet_kill(&rt2x00dev->rxdone_tasklet); - tasklet_kill(&rt2x00dev->tbtt_tasklet); - } -} - -static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (unlikely(rt2400pci_init_queues(rt2x00dev) || - rt2400pci_init_registers(rt2x00dev) || - rt2400pci_init_bbp(rt2x00dev))) - return -EIO; - - return 0; -} - -static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Disable power - */ - rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0); -} - -static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg, reg2; - unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®); - rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); - rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); - rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®2); - bbp_state = rt2x00_get_field32(reg2, PWRCSR1_BBP_CURR_STATE); - rf_state = rt2x00_get_field32(reg2, PWRCSR1_RF_CURR_STATE); - if (bbp_state == state && rf_state == state) - return 0; - rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); - msleep(10); - } - - return -EBUSY; -} - -static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2400pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt2400pci_disable_radio(rt2x00dev); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - rt2400pci_toggle_irq(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2400pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt2400pci_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *txd = entry_priv->desc; - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, txdesc->length); - rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, txdesc->length); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 3, &word); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->u.plcp.signal); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_REGNUM, 5); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_BUSY, 1); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->u.plcp.service); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_REGNUM, 6); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_BUSY, 1); - rt2x00_desc_write(txd, 3, word); - - rt2x00_desc_read(txd, 4, &word); - rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, - txdesc->u.plcp.length_low); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_REGNUM, 8); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_BUSY, 1); - rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, - txdesc->u.plcp.length_high); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_REGNUM, 7); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_BUSY, 1); - rt2x00_desc_write(txd, 4, word); - - /* - * Writing TXD word 0 must the last to prevent a race condition with - * the device, whereby the device may take hold of the TXD before we - * finished updating it. - */ - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_RTS, - test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_desc_write(txd, 0, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->desc = txd; - skbdesc->desc_len = TXD_DESC_SIZE; -} - -/* - * TX data initialization - */ -static void rt2400pci_write_beacon(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - u32 reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - if (rt2x00queue_map_txskb(entry)) { - rt2x00_err(rt2x00dev, "Fail to map beacon, aborting\n"); - goto out; - } - /* - * Enable beaconing again. - */ - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - /* - * Write the TX descriptor for the beacon. - */ - rt2400pci_write_tx_desc(entry, txdesc); - - /* - * Dump beacon to userspace through debugfs. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -out: - /* - * Enable beaconing again. - */ - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); -} - -/* - * RX control handlers - */ -static void rt2400pci_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word0; - u32 word2; - u32 word3; - u32 word4; - u64 tsf; - u32 rx_low; - u32 rx_high; - - rt2x00_desc_read(entry_priv->desc, 0, &word0); - rt2x00_desc_read(entry_priv->desc, 2, &word2); - rt2x00_desc_read(entry_priv->desc, 3, &word3); - rt2x00_desc_read(entry_priv->desc, 4, &word4); - - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - /* - * We only get the lower 32bits from the timestamp, - * to get the full 64bits we must complement it with - * the timestamp from get_tsf(). - * Note that when a wraparound of the lower 32bits - * has occurred between the frame arrival and the get_tsf() - * call, we must decrease the higher 32bits with 1 to get - * to correct value. - */ - tsf = rt2x00dev->ops->hw->get_tsf(rt2x00dev->hw, NULL); - rx_low = rt2x00_get_field32(word4, RXD_W4_RX_END_TIME); - rx_high = upper_32_bits(tsf); - - if ((u32)tsf <= rx_low) - rx_high--; - - /* - * Obtain the status about this packet. - * The signal is the PLCP value, and needs to be stripped - * of the preamble bit (0x08). - */ - rxdesc->timestamp = ((u64)rx_high << 32) | rx_low; - rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL) & ~0x08; - rxdesc->rssi = rt2x00_get_field32(word3, RXD_W3_RSSI) - - entry->queue->rt2x00dev->rssi_offset; - rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; - if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; -} - -/* - * Interrupt functions. - */ -static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue_idx) -{ - struct data_queue *queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); - struct queue_entry_priv_mmio *entry_priv; - struct queue_entry *entry; - struct txdone_entry_desc txdesc; - u32 word; - - while (!rt2x00queue_empty(queue)) { - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - entry_priv = entry->priv_data; - rt2x00_desc_read(entry_priv->desc, 0, &word); - - if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - !rt2x00_get_field32(word, TXD_W0_VALID)) - break; - - /* - * Obtain the status about this packet. - */ - txdesc.flags = 0; - switch (rt2x00_get_field32(word, TXD_W0_RESULT)) { - case 0: /* Success */ - case 1: /* Success with retry */ - __set_bit(TXDONE_SUCCESS, &txdesc.flags); - break; - case 2: /* Failure, excessive retries */ - __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); - /* Don't break, this is a failed frame! */ - default: /* Failure */ - __set_bit(TXDONE_FAILURE, &txdesc.flags); - } - txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - - rt2x00lib_txdone(entry, &txdesc); - } -} - -static inline void rt2400pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) -{ - u32 reg; - - /* - * Enable a single interrupt. The interrupt mask register - * access needs locking. - */ - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, irq_field, 0); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); -} - -static void rt2400pci_txstatus_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - u32 reg; - - /* - * Handle all tx queues. - */ - rt2400pci_txdone(rt2x00dev, QID_ATIM); - rt2400pci_txdone(rt2x00dev, QID_AC_VO); - rt2400pci_txdone(rt2x00dev, QID_AC_VI); - - /* - * Enable all TXDONE interrupts again. - */ - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) { - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, 0); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); - } -} - -static void rt2400pci_tbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00lib_beacondone(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2400pci_enable_interrupt(rt2x00dev, CSR8_TBCN_EXPIRE); -} - -static void rt2400pci_rxdone_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2x00mmio_rxdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); -} - -static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg, mask; - - /* - * Get the interrupt sources & saved to local variable. - * Write register value back to clear pending interrupts. - */ - rt2x00mmio_register_read(rt2x00dev, CSR7, ®); - rt2x00mmio_register_write(rt2x00dev, CSR7, reg); - - if (!reg) - return IRQ_NONE; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - mask = reg; - - /* - * Schedule tasklets for interrupt handling. - */ - if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) - tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); - - if (rt2x00_get_field32(reg, CSR7_RXDONE)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - - if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING) || - rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING) || - rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) { - tasklet_schedule(&rt2x00dev->txstatus_tasklet); - /* - * Mask out all txdone interrupts. - */ - rt2x00_set_field32(&mask, CSR8_TXDONE_TXRING, 1); - rt2x00_set_field32(&mask, CSR8_TXDONE_ATIMRING, 1); - rt2x00_set_field32(&mask, CSR8_TXDONE_PRIORING, 1); - } - - /* - * Disable all interrupts for which a tasklet was scheduled right now, - * the tasklet will reenable the appropriate interrupts. - */ - spin_lock(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - reg |= mask; - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock(&rt2x00dev->irqmask_lock); - - - - return IRQ_HANDLED; -} - -/* - * Device probe functions. - */ -static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - u16 word; - u8 *mac; - - rt2x00mmio_register_read(rt2x00dev, CSR21, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt2400pci_eepromregister_read; - eeprom.register_write = rt2400pci_eepromregister_write; - eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? - PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - eth_random_addr(mac); - rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_err(rt2x00dev, "Invalid EEPROM data detected\n"); - return -EINVAL; - } - - return 0; -} - -static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00mmio_register_read(rt2x00dev, CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2460, value, - rt2x00_get_field32(reg, CSR0_REVISION)); - - if (!rt2x00_rf(rt2x00dev, RF2420) && !rt2x00_rf(rt2x00dev, RF2421)) { - rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead. - * I am not 100% sure about this, but the legacy drivers do not - * indicate antenna swapping in software is required when - * diversity is enabled. - */ - if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) - rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; - if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) - rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; - - /* - * Store led mode, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - if (value == LED_MODE_TXRX_ACTIVITY || - value == LED_MODE_DEFAULT || - value == LED_MODE_ASUS) - rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_ACTIVITY); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); - - /* - * Check if the BBP tuning should be enabled. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING)) - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - - return 0; -} - -/* - * RF value list for RF2420 & RF2421 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_b[] = { - { 1, 0x00022058, 0x000c1fda, 0x00000101, 0 }, - { 2, 0x00022058, 0x000c1fee, 0x00000101, 0 }, - { 3, 0x00022058, 0x000c2002, 0x00000101, 0 }, - { 4, 0x00022058, 0x000c2016, 0x00000101, 0 }, - { 5, 0x00022058, 0x000c202a, 0x00000101, 0 }, - { 6, 0x00022058, 0x000c203e, 0x00000101, 0 }, - { 7, 0x00022058, 0x000c2052, 0x00000101, 0 }, - { 8, 0x00022058, 0x000c2066, 0x00000101, 0 }, - { 9, 0x00022058, 0x000c207a, 0x00000101, 0 }, - { 10, 0x00022058, 0x000c208e, 0x00000101, 0 }, - { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 }, - { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 }, - { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 }, - { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 }, -}; - -static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power; - unsigned int i; - - /* - * Initialize all hw fields. - */ - ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); - ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING); - ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK; - - spec->num_channels = ARRAY_SIZE(rf_vals_b); - spec->channels = rf_vals_b; - - /* - * Create channel information array - */ - info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) { - info[i].max_power = TXPOWER_FROM_DEV(MAX_TXPOWER); - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); - } - - return 0; -} - -static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u32 reg; - - /* - * Allocate eeprom data. - */ - retval = rt2400pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2400pci_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); - rt2x00_set_field32(®, GPIOCSR_DIR0, 1); - rt2x00mmio_register_write(rt2x00dev, GPIOCSR, reg); - - /* - * Initialize hw specifications. - */ - retval = rt2400pci_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device requires the atim queue and DMA-mapped skbs. - */ - __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static int rt2400pci_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * We don't support variating cw_min and cw_max variables - * per queue. So by default we only configure the TX queue, - * and ignore all other configurations. - */ - if (queue != 0) - return -EINVAL; - - if (rt2x00mac_conf_tx(hw, vif, queue, params)) - return -EINVAL; - - /* - * Write configuration to register. - */ - rt2400pci_config_cw(rt2x00dev, - rt2x00dev->tx->cw_min, rt2x00dev->tx->cw_max); - - return 0; -} - -static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR17, ®); - tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; - rt2x00mmio_register_read(rt2x00dev, CSR16, ®); - tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); - - return tsf; -} - -static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR15, ®); - return rt2x00_get_field32(reg, CSR15_BEACON_SENT); -} - -static const struct ieee80211_ops rt2400pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2400pci_conf_tx, - .get_tsf = rt2400pci_get_tsf, - .tx_last_beacon = rt2400pci_tx_last_beacon, - .rfkill_poll = rt2x00mac_rfkill_poll, - .flush = rt2x00mac_flush, - .set_antenna = rt2x00mac_set_antenna, - .get_antenna = rt2x00mac_get_antenna, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { - .irq_handler = rt2400pci_interrupt, - .txstatus_tasklet = rt2400pci_txstatus_tasklet, - .tbtt_tasklet = rt2400pci_tbtt_tasklet, - .rxdone_tasklet = rt2400pci_rxdone_tasklet, - .probe_hw = rt2400pci_probe_hw, - .initialize = rt2x00mmio_initialize, - .uninitialize = rt2x00mmio_uninitialize, - .get_entry_state = rt2400pci_get_entry_state, - .clear_entry = rt2400pci_clear_entry, - .set_device_state = rt2400pci_set_device_state, - .rfkill_poll = rt2400pci_rfkill_poll, - .link_stats = rt2400pci_link_stats, - .reset_tuner = rt2400pci_reset_tuner, - .link_tuner = rt2400pci_link_tuner, - .start_queue = rt2400pci_start_queue, - .kick_queue = rt2400pci_kick_queue, - .stop_queue = rt2400pci_stop_queue, - .flush_queue = rt2x00mmio_flush_queue, - .write_tx_desc = rt2400pci_write_tx_desc, - .write_beacon = rt2400pci_write_beacon, - .fill_rxdone = rt2400pci_fill_rxdone, - .config_filter = rt2400pci_config_filter, - .config_intf = rt2400pci_config_intf, - .config_erp = rt2400pci_config_erp, - .config_ant = rt2400pci_config_ant, - .config = rt2400pci_config, -}; - -static void rt2400pci_queue_init(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_RX: - queue->limit = 24; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = RXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 24; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_BEACON: - queue->limit = 1; - queue->data_size = MGMT_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_ATIM: - queue->limit = 8; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - default: - BUG(); - break; - } -} - -static const struct rt2x00_ops rt2400pci_ops = { - .name = KBUILD_MODNAME, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt2400pci_queue_init, - .lib = &rt2400pci_rt2x00_ops, - .hw = &rt2400pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2400pci_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT2400pci module information. - */ -static const struct pci_device_id rt2400pci_device_table[] = { - { PCI_DEVICE(0x1814, 0x0101) }, - { 0, } -}; - - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards"); -MODULE_DEVICE_TABLE(pci, rt2400pci_device_table); -MODULE_LICENSE("GPL"); - -static int rt2400pci_probe(struct pci_dev *pci_dev, - const struct pci_device_id *id) -{ - return rt2x00pci_probe(pci_dev, &rt2400pci_ops); -} - -static struct pci_driver rt2400pci_driver = { - .name = KBUILD_MODNAME, - .id_table = rt2400pci_device_table, - .probe = rt2400pci_probe, - .remove = rt2x00pci_remove, - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -module_pci_driver(rt2400pci_driver); diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h deleted file mode 100644 index 0fd3a9d01a60..000000000000 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ /dev/null @@ -1,961 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2400pci - Abstract: Data structures and registers for the rt2400pci module. - Supported chipsets: RT2460. - */ - -#ifndef RT2400PCI_H -#define RT2400PCI_H - -/* - * RF chip defines. - */ -#define RF2420 0x0000 -#define RF2421 0x0001 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 100 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x0000 -#define CSR_REG_SIZE 0x014c -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0020 -#define RF_BASE 0x0004 -#define RF_SIZE 0x000c - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 2 - -/* - * Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * CSR0: ASIC revision number. - */ -#define CSR0 0x0000 -#define CSR0_REVISION FIELD32(0x0000ffff) - -/* - * CSR1: System control register. - * SOFT_RESET: Software reset, 1: reset, 0: normal. - * BBP_RESET: Hardware reset, 1: reset, 0, release. - * HOST_READY: Host ready after initialization. - */ -#define CSR1 0x0004 -#define CSR1_SOFT_RESET FIELD32(0x00000001) -#define CSR1_BBP_RESET FIELD32(0x00000002) -#define CSR1_HOST_READY FIELD32(0x00000004) - -/* - * CSR2: System admin status register (invalid). - */ -#define CSR2 0x0008 - -/* - * CSR3: STA MAC address register 0. - */ -#define CSR3 0x000c -#define CSR3_BYTE0 FIELD32(0x000000ff) -#define CSR3_BYTE1 FIELD32(0x0000ff00) -#define CSR3_BYTE2 FIELD32(0x00ff0000) -#define CSR3_BYTE3 FIELD32(0xff000000) - -/* - * CSR4: STA MAC address register 1. - */ -#define CSR4 0x0010 -#define CSR4_BYTE4 FIELD32(0x000000ff) -#define CSR4_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR5: BSSID register 0. - */ -#define CSR5 0x0014 -#define CSR5_BYTE0 FIELD32(0x000000ff) -#define CSR5_BYTE1 FIELD32(0x0000ff00) -#define CSR5_BYTE2 FIELD32(0x00ff0000) -#define CSR5_BYTE3 FIELD32(0xff000000) - -/* - * CSR6: BSSID register 1. - */ -#define CSR6 0x0018 -#define CSR6_BYTE4 FIELD32(0x000000ff) -#define CSR6_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR7: Interrupt source register. - * Write 1 to clear interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - */ -#define CSR7 0x001c -#define CSR7_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR7_TXDONE_TXRING FIELD32(0x00000008) -#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR7_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR7_RXDONE FIELD32(0x00000040) - -/* - * CSR8: Interrupt mask register. - * Write 1 to mask interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - */ -#define CSR8 0x0020 -#define CSR8_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR8_TXDONE_TXRING FIELD32(0x00000008) -#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR8_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR8_RXDONE FIELD32(0x00000040) - -/* - * CSR9: Maximum frame length register. - * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. - */ -#define CSR9 0x0024 -#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) - -/* - * CSR11: Back-off control register. - * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). - * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). - * SLOT_TIME: Slot time, default is 20us for 802.11b. - * LONG_RETRY: Long retry count. - * SHORT_RETRY: Short retry count. - */ -#define CSR11 0x002c -#define CSR11_CWMIN FIELD32(0x0000000f) -#define CSR11_CWMAX FIELD32(0x000000f0) -#define CSR11_SLOT_TIME FIELD32(0x00001f00) -#define CSR11_LONG_RETRY FIELD32(0x00ff0000) -#define CSR11_SHORT_RETRY FIELD32(0xff000000) - -/* - * CSR12: Synchronization configuration register 0. - * All units in 1/16 TU. - * BEACON_INTERVAL: Beacon interval, default is 100 TU. - * CFPMAX_DURATION: Cfp maximum duration, default is 100 TU. - */ -#define CSR12 0x0030 -#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) -#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) - -/* - * CSR13: Synchronization configuration register 1. - * All units in 1/16 TU. - * ATIMW_DURATION: Atim window duration. - * CFP_PERIOD: Cfp period, default is 0 TU. - */ -#define CSR13 0x0034 -#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) -#define CSR13_CFP_PERIOD FIELD32(0x00ff0000) - -/* - * CSR14: Synchronization control register. - * TSF_COUNT: Enable tsf auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * TBCN: Enable tbcn with reload value. - * TCFP: Enable tcfp & cfp / cp switching. - * TATIMW: Enable tatimw & atim window switching. - * BEACON_GEN: Enable beacon generator. - * CFP_COUNT_PRELOAD: Cfp count preload value. - * TBCM_PRELOAD: Tbcn preload value in units of 64us. - */ -#define CSR14 0x0038 -#define CSR14_TSF_COUNT FIELD32(0x00000001) -#define CSR14_TSF_SYNC FIELD32(0x00000006) -#define CSR14_TBCN FIELD32(0x00000008) -#define CSR14_TCFP FIELD32(0x00000010) -#define CSR14_TATIMW FIELD32(0x00000020) -#define CSR14_BEACON_GEN FIELD32(0x00000040) -#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) -#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) - -/* - * CSR15: Synchronization status register. - * CFP: ASIC is in contention-free period. - * ATIMW: ASIC is in ATIM window. - * BEACON_SENT: Beacon is send. - */ -#define CSR15 0x003c -#define CSR15_CFP FIELD32(0x00000001) -#define CSR15_ATIMW FIELD32(0x00000002) -#define CSR15_BEACON_SENT FIELD32(0x00000004) - -/* - * CSR16: TSF timer register 0. - */ -#define CSR16 0x0040 -#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR17: TSF timer register 1. - */ -#define CSR17 0x0044 -#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR18: IFS timer register 0. - * SIFS: Sifs, default is 10 us. - * PIFS: Pifs, default is 30 us. - */ -#define CSR18 0x0048 -#define CSR18_SIFS FIELD32(0x0000ffff) -#define CSR18_PIFS FIELD32(0xffff0000) - -/* - * CSR19: IFS timer register 1. - * DIFS: Difs, default is 50 us. - * EIFS: Eifs, default is 364 us. - */ -#define CSR19 0x004c -#define CSR19_DIFS FIELD32(0x0000ffff) -#define CSR19_EIFS FIELD32(0xffff0000) - -/* - * CSR20: Wakeup timer register. - * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * AUTOWAKE: Enable auto wakeup / sleep mechanism. - */ -#define CSR20 0x0050 -#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) -#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) -#define CSR20_AUTOWAKE FIELD32(0x01000000) - -/* - * CSR21: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - */ -#define CSR21 0x0054 -#define CSR21_RELOAD FIELD32(0x00000001) -#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) -#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) -#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) -#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) -#define CSR21_TYPE_93C46 FIELD32(0x00000020) - -/* - * CSR22: CFP control register. - * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. - * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. - */ -#define CSR22 0x0058 -#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) -#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) - -/* - * Transmit related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXCSR0: TX Control Register. - * KICK_TX: Kick tx ring. - * KICK_ATIM: Kick atim ring. - * KICK_PRIO: Kick priority ring. - * ABORT: Abort all transmit related ring operation. - */ -#define TXCSR0 0x0060 -#define TXCSR0_KICK_TX FIELD32(0x00000001) -#define TXCSR0_KICK_ATIM FIELD32(0x00000002) -#define TXCSR0_KICK_PRIO FIELD32(0x00000004) -#define TXCSR0_ABORT FIELD32(0x00000008) - -/* - * TXCSR1: TX Configuration Register. - * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. - * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. - * TSF_OFFSET: Insert tsf offset. - * AUTORESPONDER: Enable auto responder which include ack & cts. - */ -#define TXCSR1 0x0064 -#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) -#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) -#define TXCSR1_AUTORESPONDER FIELD32(0x01000000) - -/* - * TXCSR2: Tx descriptor configuration register. - * TXD_SIZE: Tx descriptor size, default is 48. - * NUM_TXD: Number of tx entries in ring. - * NUM_ATIM: Number of atim entries in ring. - * NUM_PRIO: Number of priority entries in ring. - */ -#define TXCSR2 0x0068 -#define TXCSR2_TXD_SIZE FIELD32(0x000000ff) -#define TXCSR2_NUM_TXD FIELD32(0x0000ff00) -#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) -#define TXCSR2_NUM_PRIO FIELD32(0xff000000) - -/* - * TXCSR3: TX Ring Base address register. - */ -#define TXCSR3 0x006c -#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR4: TX Atim Ring Base address register. - */ -#define TXCSR4 0x0070 -#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR5: TX Prio Ring Base address register. - */ -#define TXCSR5 0x0074 -#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR6: Beacon Base address register. - */ -#define TXCSR6 0x0078 -#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR7: Auto responder control register. - * AR_POWERMANAGEMENT: Auto responder power management bit. - */ -#define TXCSR7 0x007c -#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) - -/* - * Receive related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * RXCSR0: RX Control Register. - * DISABLE_RX: Disable rx engine. - * DROP_CRC: Drop crc error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TODS: Drop frame tods bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * PASS_CRC: Pass all packets with crc attached. - */ -#define RXCSR0 0x0080 -#define RXCSR0_DISABLE_RX FIELD32(0x00000001) -#define RXCSR0_DROP_CRC FIELD32(0x00000002) -#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) -#define RXCSR0_DROP_CONTROL FIELD32(0x00000008) -#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) -#define RXCSR0_DROP_TODS FIELD32(0x00000020) -#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) -#define RXCSR0_PASS_CRC FIELD32(0x00000080) - -/* - * RXCSR1: RX descriptor configuration register. - * RXD_SIZE: Rx descriptor size, default is 32b. - * NUM_RXD: Number of rx entries in ring. - */ -#define RXCSR1 0x0084 -#define RXCSR1_RXD_SIZE FIELD32(0x000000ff) -#define RXCSR1_NUM_RXD FIELD32(0x0000ff00) - -/* - * RXCSR2: RX Ring base address register. - */ -#define RXCSR2 0x0088 -#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) - -/* - * RXCSR3: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR3 0x0090 -#define RXCSR3_BBP_ID0 FIELD32(0x0000007f) -#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define RXCSR3_BBP_ID1 FIELD32(0x00007f00) -#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define RXCSR3_BBP_ID2 FIELD32(0x007f0000) -#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define RXCSR3_BBP_ID3 FIELD32(0x7f000000) -#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * RXCSR4: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR4 0x0094 -#define RXCSR4_BBP_ID4 FIELD32(0x0000007f) -#define RXCSR4_BBP_ID4_VALID FIELD32(0x00000080) -#define RXCSR4_BBP_ID5 FIELD32(0x00007f00) -#define RXCSR4_BBP_ID5_VALID FIELD32(0x00008000) - -/* - * ARCSR0: Auto Responder PLCP config register 0. - * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. - * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR0 0x0098 -#define ARCSR0_AR_BBP_DATA0 FIELD32(0x000000ff) -#define ARCSR0_AR_BBP_ID0 FIELD32(0x0000ff00) -#define ARCSR0_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define ARCSR0_AR_BBP_ID1 FIELD32(0xff000000) - -/* - * ARCSR1: Auto Responder PLCP config register 1. - * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. - * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR1 0x009c -#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) -#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) -#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) -#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) - -/* - * Miscellaneous Registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PCICSR: PCI control register. - * BIG_ENDIAN: 1: big endian, 0: little endian. - * RX_TRESHOLD: Rx threshold in dw to start pci access - * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. - * TX_TRESHOLD: Tx threshold in dw to start pci access - * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. - * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. - * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. - */ -#define PCICSR 0x008c -#define PCICSR_BIG_ENDIAN FIELD32(0x00000001) -#define PCICSR_RX_TRESHOLD FIELD32(0x00000006) -#define PCICSR_TX_TRESHOLD FIELD32(0x00000018) -#define PCICSR_BURST_LENTH FIELD32(0x00000060) -#define PCICSR_ENABLE_CLK FIELD32(0x00000080) - -/* - * CNT0: FCS error count. - * FCS_ERROR: FCS error count, cleared when read. - */ -#define CNT0 0x00a0 -#define CNT0_FCS_ERROR FIELD32(0x0000ffff) - -/* - * Statistic Register. - * CNT1: PLCP error count. - * CNT2: Long error count. - * CNT3: CCA false alarm count. - * CNT4: Rx FIFO overflow count. - * CNT5: Tx FIFO underrun count. - */ -#define TIMECSR2 0x00a8 -#define CNT1 0x00ac -#define CNT2 0x00b0 -#define TIMECSR3 0x00b4 -#define CNT3 0x00b8 -#define CNT4 0x00bc -#define CNT5 0x00c0 - -/* - * Baseband Control Register. - */ - -/* - * PWRCSR0: Power mode configuration register. - */ -#define PWRCSR0 0x00c4 - -/* - * Power state transition time registers. - */ -#define PSCSR0 0x00c8 -#define PSCSR1 0x00cc -#define PSCSR2 0x00d0 -#define PSCSR3 0x00d4 - -/* - * PWRCSR1: Manual power control / status register. - * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. - * SET_STATE: Set state. Write 1 to trigger, self cleared. - * BBP_DESIRE_STATE: BBP desired state. - * RF_DESIRE_STATE: RF desired state. - * BBP_CURR_STATE: BBP current state. - * RF_CURR_STATE: RF current state. - * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. - */ -#define PWRCSR1 0x00d8 -#define PWRCSR1_SET_STATE FIELD32(0x00000001) -#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) -#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) -#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) -#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) -#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) - -/* - * TIMECSR: Timer control register. - * US_COUNT: 1 us timer count in units of clock cycles. - * US_64_COUNT: 64 us timer count in units of 1 us timer. - * BEACON_EXPECT: Beacon expect window. - */ -#define TIMECSR 0x00dc -#define TIMECSR_US_COUNT FIELD32(0x000000ff) -#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) -#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) - -/* - * MACCSR0: MAC configuration register 0. - */ -#define MACCSR0 0x00e0 - -/* - * MACCSR1: MAC configuration register 1. - * KICK_RX: Kick one-shot rx in one-shot rx mode. - * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. - * BBPRX_RESET_MODE: Ralink bbp rx reset mode. - * AUTO_TXBBP: Auto tx logic access bbp control register. - * AUTO_RXBBP: Auto rx logic access bbp control register. - * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. - * INTERSIL_IF: Intersil if calibration pin. - */ -#define MACCSR1 0x00e4 -#define MACCSR1_KICK_RX FIELD32(0x00000001) -#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) -#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) -#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) -#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) -#define MACCSR1_LOOPBACK FIELD32(0x00000060) -#define MACCSR1_INTERSIL_IF FIELD32(0x00000080) - -/* - * RALINKCSR: Ralink Rx auto-reset BBCR. - * AR_BBP_DATA#: Auto reset BBP register # data. - * AR_BBP_ID#: Auto reset BBP register # id. - */ -#define RALINKCSR 0x00e8 -#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) -#define RALINKCSR_AR_BBP_ID0 FIELD32(0x0000ff00) -#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define RALINKCSR_AR_BBP_ID1 FIELD32(0xff000000) - -/* - * BCNCSR: Beacon interval control register. - * CHANGE: Write one to change beacon interval. - * DELTATIME: The delta time value. - * NUM_BEACON: Number of beacon according to mode. - * MODE: Please refer to asic specs. - * PLUS: Plus or minus delta time value. - */ -#define BCNCSR 0x00ec -#define BCNCSR_CHANGE FIELD32(0x00000001) -#define BCNCSR_DELTATIME FIELD32(0x0000001e) -#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) -#define BCNCSR_MODE FIELD32(0x00006000) -#define BCNCSR_PLUS FIELD32(0x00008000) - -/* - * BBP / RF / IF Control Register. - */ - -/* - * BBPCSR: BBP serial control register. - * VALUE: Register value to program into BBP. - * REGNUM: Selected BBP register. - * BUSY: 1: asic is busy execute BBP programming. - * WRITE_CONTROL: 1: write BBP, 0: read BBP. - */ -#define BBPCSR 0x00f0 -#define BBPCSR_VALUE FIELD32(0x000000ff) -#define BBPCSR_REGNUM FIELD32(0x00007f00) -#define BBPCSR_BUSY FIELD32(0x00008000) -#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) - -/* - * RFCSR: RF serial control register. - * VALUE: Register value + id to program into rf/if. - * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). - * IF_SELECT: Chip to program: 0: rf, 1: if. - * PLL_LD: Rf pll_ld status. - * BUSY: 1: asic is busy execute rf programming. - */ -#define RFCSR 0x00f4 -#define RFCSR_VALUE FIELD32(0x00ffffff) -#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) -#define RFCSR_IF_SELECT FIELD32(0x20000000) -#define RFCSR_PLL_LD FIELD32(0x40000000) -#define RFCSR_BUSY FIELD32(0x80000000) - -/* - * LEDCSR: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * LINK: 0: linkoff, 1: linkup. - * ACTIVITY: 0: idle, 1: active. - */ -#define LEDCSR 0x00f8 -#define LEDCSR_ON_PERIOD FIELD32(0x000000ff) -#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) -#define LEDCSR_LINK FIELD32(0x00010000) -#define LEDCSR_ACTIVITY FIELD32(0x00020000) - -/* - * ASIC pointer information. - * RXPTR: Current RX ring address. - * TXPTR: Current Tx ring address. - * PRIPTR: Current Priority ring address. - * ATIMPTR: Current ATIM ring address. - */ -#define RXPTR 0x0100 -#define TXPTR 0x0104 -#define PRIPTR 0x0108 -#define ATIMPTR 0x010c - -/* - * GPIO and others. - */ - -/* - * GPIOCSR: GPIO control register. - * GPIOCSR_VALx: Actual GPIO pin x value - * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input - */ -#define GPIOCSR 0x0120 -#define GPIOCSR_VAL0 FIELD32(0x00000001) -#define GPIOCSR_VAL1 FIELD32(0x00000002) -#define GPIOCSR_VAL2 FIELD32(0x00000004) -#define GPIOCSR_VAL3 FIELD32(0x00000008) -#define GPIOCSR_VAL4 FIELD32(0x00000010) -#define GPIOCSR_VAL5 FIELD32(0x00000020) -#define GPIOCSR_VAL6 FIELD32(0x00000040) -#define GPIOCSR_VAL7 FIELD32(0x00000080) -#define GPIOCSR_DIR0 FIELD32(0x00000100) -#define GPIOCSR_DIR1 FIELD32(0x00000200) -#define GPIOCSR_DIR2 FIELD32(0x00000400) -#define GPIOCSR_DIR3 FIELD32(0x00000800) -#define GPIOCSR_DIR4 FIELD32(0x00001000) -#define GPIOCSR_DIR5 FIELD32(0x00002000) -#define GPIOCSR_DIR6 FIELD32(0x00004000) -#define GPIOCSR_DIR7 FIELD32(0x00008000) - -/* - * BBPPCSR: BBP Pin control register. - */ -#define BBPPCSR 0x0124 - -/* - * BCNCSR1: Tx BEACON offset time control register. - * PRELOAD: Beacon timer offset in units of usec. - */ -#define BCNCSR1 0x0130 -#define BCNCSR1_PRELOAD FIELD32(0x0000ffff) - -/* - * MACCSR2: TX_PE to RX_PE turn-around time control register - * DELAY: RX_PE low width, in units of pci clock cycle. - */ -#define MACCSR2 0x0134 -#define MACCSR2_DELAY FIELD32(0x000000ff) - -/* - * ARCSR2: 1 Mbps ACK/CTS PLCP. - */ -#define ARCSR2 0x013c -#define ARCSR2_SIGNAL FIELD32(0x000000ff) -#define ARCSR2_SERVICE FIELD32(0x0000ff00) -#define ARCSR2_LENGTH_LOW FIELD32(0x00ff0000) -#define ARCSR2_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR3: 2 Mbps ACK/CTS PLCP. - */ -#define ARCSR3 0x0140 -#define ARCSR3_SIGNAL FIELD32(0x000000ff) -#define ARCSR3_SERVICE FIELD32(0x0000ff00) -#define ARCSR3_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR4: 5.5 Mbps ACK/CTS PLCP. - */ -#define ARCSR4 0x0144 -#define ARCSR4_SIGNAL FIELD32(0x000000ff) -#define ARCSR4_SERVICE FIELD32(0x0000ff00) -#define ARCSR4_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR5: 11 Mbps ACK/CTS PLCP. - */ -#define ARCSR5 0x0148 -#define ARCSR5_SIGNAL FIELD32(0x000000ff) -#define ARCSR5_SERVICE FIELD32(0x0000ff00) -#define ARCSR5_LENGTH FIELD32(0xffff0000) - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R1: TX antenna control - */ -#define BBP_R1_TX_ANTENNA FIELD8(0x03) - -/* - * R4: RX antenna control - */ -#define BBP_R4_RX_ANTENNA FIELD8(0x06) - -/* - * RF registers - */ - -/* - * RF 1 - */ -#define RF1_TUNER FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TUNER FIELD32(0x00000100) -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RF_TYPE: Rf_type of this adapter. - * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. - * RX_AGCVGC: 0: disable, 1:enable BBP R13 tuning. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - */ -#define EEPROM_ANTENNA 0x0b -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_LED_MODE FIELD16(0x0180) -#define EEPROM_ANTENNA_RX_AGCVGC_TUNING FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0c -#define EEPROM_BBP_SIZE 7 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER - */ -#define EEPROM_TXPOWER_START 0x13 -#define EEPROM_TXPOWER_SIZE 7 -#define EEPROM_TXPOWER_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_2 FIELD16(0xff00) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE (8 * sizeof(__le32)) -#define RXD_DESC_SIZE (8 * sizeof(__le32)) - -/* - * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_RESULT FIELD32(0x0000001c) -#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) -#define TXD_W0_MORE_FRAG FIELD32(0x00000100) -#define TXD_W0_ACK FIELD32(0x00000200) -#define TXD_W0_TIMESTAMP FIELD32(0x00000400) -#define TXD_W0_RTS FIELD32(0x00000800) -#define TXD_W0_IFS FIELD32(0x00006000) -#define TXD_W0_RETRY_MODE FIELD32(0x00008000) -#define TXD_W0_AGC FIELD32(0x00ff0000) -#define TXD_W0_R2 FIELD32(0xff000000) - -/* - * Word1 - */ -#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define TXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define TXD_W2_DATABYTE_COUNT FIELD32(0xffff0000) - -/* - * Word3 & 4: PLCP information - * The PLCP values should be treated as if they were BBP values. - */ -#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W3_PLCP_SIGNAL_REGNUM FIELD32(0x00007f00) -#define TXD_W3_PLCP_SIGNAL_BUSY FIELD32(0x00008000) -#define TXD_W3_PLCP_SERVICE FIELD32(0x00ff0000) -#define TXD_W3_PLCP_SERVICE_REGNUM FIELD32(0x7f000000) -#define TXD_W3_PLCP_SERVICE_BUSY FIELD32(0x80000000) - -#define TXD_W4_PLCP_LENGTH_LOW FIELD32(0x000000ff) -#define TXD_W3_PLCP_LENGTH_LOW_REGNUM FIELD32(0x00007f00) -#define TXD_W3_PLCP_LENGTH_LOW_BUSY FIELD32(0x00008000) -#define TXD_W4_PLCP_LENGTH_HIGH FIELD32(0x00ff0000) -#define TXD_W3_PLCP_LENGTH_HIGH_REGNUM FIELD32(0x7f000000) -#define TXD_W3_PLCP_LENGTH_HIGH_BUSY FIELD32(0x80000000) - -/* - * Word5 - */ -#define TXD_W5_BBCR4 FIELD32(0x0000ffff) -#define TXD_W5_AGC_REG FIELD32(0x007f0000) -#define TXD_W5_AGC_REG_VALID FIELD32(0x00800000) -#define TXD_W5_XXX_REG FIELD32(0x7f000000) -#define TXD_W5_XXX_REG_VALID FIELD32(0x80000000) - -/* - * Word6 - */ -#define TXD_W6_SK_BUFF FIELD32(0xffffffff) - -/* - * Word7 - */ -#define TXD_W7_RESERVED FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) -#define RXD_W0_MULTICAST FIELD32(0x00000004) -#define RXD_W0_BROADCAST FIELD32(0x00000008) -#define RXD_W0_MY_BSS FIELD32(0x00000010) -#define RXD_W0_CRC_ERROR FIELD32(0x00000020) -#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) -#define RXD_W0_DATABYTE_COUNT FIELD32(0xffff0000) - -/* - * Word1 - */ -#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define RXD_W2_BBR0 FIELD32(0x00ff0000) -#define RXD_W2_SIGNAL FIELD32(0xff000000) - -/* - * Word3 - */ -#define RXD_W3_RSSI FIELD32(0x000000ff) -#define RXD_W3_BBR3 FIELD32(0x0000ff00) -#define RXD_W3_BBR4 FIELD32(0x00ff0000) -#define RXD_W3_BBR5 FIELD32(0xff000000) - -/* - * Word4 - */ -#define RXD_W4_RX_END_TIME FIELD32(0xffffffff) - -/* - * Word5 & 6 & 7: Reserved - */ -#define RXD_W5_RESERVED FIELD32(0xffffffff) -#define RXD_W6_RESERVED FIELD32(0xffffffff) -#define RXD_W7_RESERVED FIELD32(0xffffffff) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - * NOTE: Logics in rt2400pci for txpower are reversed - * compared to the other rt2x00 drivers. A higher txpower - * value means that the txpower must be lowered. This is - * important when converting the value coming from the - * mac80211 stack to the rt2400 acceptable value. - */ -#define MIN_TXPOWER 31 -#define MAX_TXPOWER 62 -#define DEFAULT_TXPOWER 39 - -#define __CLAMP_TX(__txpower) \ - clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER) - -#define TXPOWER_FROM_DEV(__txpower) \ - ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER) - -#define TXPOWER_TO_DEV(__txpower) \ - (MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)) - -#endif /* RT2400PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c deleted file mode 100644 index 1a6740b4d396..000000000000 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ /dev/null @@ -1,2148 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2500pci - Abstract: rt2500pci device specific routines. - Supported chipsets: RT2560. - */ - -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/eeprom_93cx6.h> -#include <linux/slab.h> - -#include "rt2x00.h" -#include "rt2x00mmio.h" -#include "rt2x00pci.h" -#include "rt2500pci.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00mmio_register_read and rt2x00mmio_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) - -static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBPCSR_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); - - rt2x00mmio_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR21, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); -} - -static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00mmio_register_write(rt2x00dev, CSR21, reg); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2500pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00mmio_register_read, - .write = rt2x00mmio_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2500pci_bbp_read, - .write = rt2500pci_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2500pci_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); - return rt2x00_get_field32(reg, GPIOCSR_VAL0); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2500pci_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - u32 reg; - - rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); - - if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) - rt2x00_set_field32(®, LEDCSR_LINK, enabled); - else if (led->type == LED_TYPE_ACTIVITY) - rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled); - - rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); -} - -static int rt2500pci_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); - rt2x00_set_field32(®, LEDCSR_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, *delay_off); - rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); - - return 0; -} - -static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2500pci_brightness_set; - led->led_dev.blink_set = rt2500pci_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DROP_CRC, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, RXCSR0_DROP_MCAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RXCSR0_DROP_BCAST, 0); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); -} - -static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - struct data_queue *queue = rt2x00dev->bcn; - unsigned int bcn_preload; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Enable beacon config - */ - bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); - rt2x00mmio_register_read(rt2x00dev, BCNCSR1, ®); - rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); - rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, queue->cw_min); - rt2x00mmio_register_write(rt2x00dev, BCNCSR1, reg); - - /* - * Enable synchronisation. - */ - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - } - - if (flags & CONFIG_UPDATE_MAC) - rt2x00mmio_register_multiwrite(rt2x00dev, CSR3, - conf->mac, sizeof(conf->mac)); - - if (flags & CONFIG_UPDATE_BSSID) - rt2x00mmio_register_multiwrite(rt2x00dev, CSR5, - conf->bssid, sizeof(conf->bssid)); -} - -static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp, - u32 changed) -{ - int preamble_mask; - u32 reg; - - /* - * When short preamble is enabled, we should set bit 0x08 - */ - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - preamble_mask = erp->short_preamble << 3; - - rt2x00mmio_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x162); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0xa2); - rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); - rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 10)); - rt2x00mmio_register_write(rt2x00dev, ARCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR3, ®); - rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); - rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 20)); - rt2x00mmio_register_write(rt2x00dev, ARCSR3, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR4, ®); - rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); - rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 55)); - rt2x00mmio_register_write(rt2x00dev, ARCSR4, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR5, ®); - rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); - rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 110)); - rt2x00mmio_register_write(rt2x00dev, ARCSR5, reg); - } - - if (changed & BSS_CHANGED_BASIC_RATES) - rt2x00mmio_register_write(rt2x00dev, ARCSR1, erp->basic_rates); - - if (changed & BSS_CHANGED_ERP_SLOT) { - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); - rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); - rt2x00mmio_register_write(rt2x00dev, CSR18, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, erp->difs); - rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); - rt2x00mmio_register_write(rt2x00dev, CSR19, reg); - } - - if (changed & BSS_CHANGED_BEACON_INT) { - rt2x00mmio_register_read(rt2x00dev, CSR12, ®); - rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, - erp->beacon_int * 16); - rt2x00mmio_register_write(rt2x00dev, CSR12, reg); - } - -} - -static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u32 reg; - u8 r14; - u8 r2; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - rt2x00mmio_register_read(rt2x00dev, BBPCSR1, ®); - rt2500pci_bbp_read(rt2x00dev, 14, &r14); - rt2500pci_bbp_read(rt2x00dev, 2, &r2); - - /* - * Configure the TX antenna. - */ - switch (ant->tx) { - case ANTENNA_A: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); - rt2x00_set_field32(®, BBPCSR1_CCK, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); - rt2x00_set_field32(®, BBPCSR1_CCK, 2); - rt2x00_set_field32(®, BBPCSR1_OFDM, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_A: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); - break; - } - - /* - * RT2525E and RT5222 need to flip TX I/Q - */ - if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) { - rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1); - - /* - * RT2525E does not need RX I/Q Flip. - */ - if (rt2x00_rf(rt2x00dev, RF2525E)) - rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); - } else { - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 0); - } - - rt2x00mmio_register_write(rt2x00dev, BBPCSR1, reg); - rt2500pci_bbp_write(rt2x00dev, 14, r14); - rt2500pci_bbp_write(rt2x00dev, 2, r2); -} - -static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r70; - - /* - * Set TXpower. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - - /* - * Switch on tuning bits. - * For RT2523 devices we do not need to update the R1 register. - */ - if (!rt2x00_rf(rt2x00dev, RF2523)) - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1); - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1); - - /* - * For RT2525 we should first set the channel to half band higher. - */ - if (rt2x00_rf(rt2x00dev, RF2525)) { - static const u32 vals[] = { - 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a, - 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a, - 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a, - 0x00080d2e, 0x00080d3a - }; - - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500pci_rf_write(rt2x00dev, 4, rf->rf4); - } - - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2500pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500pci_rf_write(rt2x00dev, 4, rf->rf4); - - /* - * Channel 14 requires the Japan filter bit to be set. - */ - r70 = 0x46; - rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14); - rt2500pci_bbp_write(rt2x00dev, 70, r70); - - msleep(1); - - /* - * Switch off tuning bits. - * For RT2523 devices we do not need to update the R1 register. - */ - if (!rt2x00_rf(rt2x00dev, RF2523)) { - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0); - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - } - - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - - /* - * Clear false CRC during channel switch. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, &rf->rf1); -} - -static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 rf3; - - rt2x00_rf_read(rt2x00dev, 3, &rf3); - rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2500pci_rf_write(rt2x00dev, 3, rf3); -} - -static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_LONG_RETRY, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, CSR11_SHORT_RETRY, - libconf->conf->short_frame_max_tx_count); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); -} - -static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00mmio_register_read(rt2x00dev, CSR20, ®); - rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, - (rt2x00dev->beacon_int - 20) * 16); - rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, - libconf->conf->listen_interval - 1); - - /* We must first disable autowake before it can be enabled */ - rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - - rt2x00_set_field32(®, CSR20_AUTOWAKE, 1); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - } else { - rt2x00mmio_register_read(rt2x00dev, CSR20, ®); - rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - } - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); -} - -static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2500pci_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & IEEE80211_CONF_CHANGE_POWER) && - !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) - rt2500pci_config_txpower(rt2x00dev, - libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2500pci_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2500pci_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2x00mmio_register_read(rt2x00dev, CNT3, ®); - qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA); -} - -static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level_reg != vgc_level) { - rt2500pci_bbp_write(rt2x00dev, 17, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2500pci_set_vgc(rt2x00dev, qual, 0x48); -} - -static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - /* - * To prevent collisions with MAC ASIC on chipsets - * up to version C the link tuning should halt after 20 - * seconds while being associated. - */ - if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D && - rt2x00dev->intf_associated && count > 20) - return; - - /* - * Chipset versions C and lower should directly continue - * to the dynamic CCA tuning. Chipset version D and higher - * should go straight to dynamic CCA tuning when they - * are not associated. - */ - if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D || - !rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (qual->rssi < -80 && count > 20) { - if (qual->vgc_level_reg >= 0x41) - rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level); - return; - } - - /* - * Special big-R17 for short distance - */ - if (qual->rssi >= -58) { - rt2500pci_set_vgc(rt2x00dev, qual, 0x50); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (qual->rssi >= -74) { - rt2500pci_set_vgc(rt2x00dev, qual, 0x41); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - if (qual->vgc_level_reg >= 0x41) { - rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level); - return; - } - -dynamic_cca_tune: - - /* - * R17 is inside the dynamic tuning range, - * start tuning the link based on the false cca counter. - */ - if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40) - rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg); - else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32) - rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg); -} - -/* - * Queue handlers. - */ -static void rt2500pci_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 0); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); - rt2x00_set_field32(®, CSR14_TBCN, 1); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - break; - default: - break; - } -} - -static void rt2500pci_kick_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_AC_VI: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_ATIM: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - default: - break; - } -} - -static void rt2500pci_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_ATIM: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_ABORT, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - /* - * Wait for possibly running tbtt tasklets. - */ - tasklet_kill(&rt2x00dev->tbtt_tasklet); - break; - default: - break; - } -} - -/* - * Initialization functions. - */ -static bool rt2500pci_get_entry_state(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - rt2x00_get_field32(word, TXD_W0_VALID)); - } -} - -static void rt2500pci_clear_entry(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 1, word); - - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); - } -} - -static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev) -{ - struct queue_entry_priv_mmio *entry_priv; - u32 reg; - - /* - * Initialize registers. - */ - rt2x00mmio_register_read(rt2x00dev, TXCSR2, ®); - rt2x00_set_field32(®, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size); - rt2x00_set_field32(®, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit); - rt2x00_set_field32(®, TXCSR2_NUM_ATIM, rt2x00dev->atim->limit); - rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); - rt2x00mmio_register_write(rt2x00dev, TXCSR2, reg); - - entry_priv = rt2x00dev->tx[1].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR3, ®); - rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR3, reg); - - entry_priv = rt2x00dev->tx[0].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR5, ®); - rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR5, reg); - - entry_priv = rt2x00dev->atim->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR4, ®); - rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR4, reg); - - entry_priv = rt2x00dev->bcn->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR6, ®); - rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR6, reg); - - rt2x00mmio_register_read(rt2x00dev, RXCSR1, ®); - rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); - rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); - rt2x00mmio_register_write(rt2x00dev, RXCSR1, reg); - - entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, RXCSR2, reg); - - return 0; -} - -static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_write(rt2x00dev, PSCSR0, 0x00020002); - rt2x00mmio_register_write(rt2x00dev, PSCSR1, 0x00000002); - rt2x00mmio_register_write(rt2x00dev, PSCSR2, 0x00020002); - rt2x00mmio_register_write(rt2x00dev, PSCSR3, 0x00000002); - - rt2x00mmio_register_read(rt2x00dev, TIMECSR, ®); - rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); - rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); - rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); - rt2x00mmio_register_write(rt2x00dev, TIMECSR, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR9, ®); - rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, - rt2x00dev->rx->data_size / 128); - rt2x00mmio_register_write(rt2x00dev, CSR9, reg); - - /* - * Always use CWmin and CWmax set in descriptor. - */ - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_CW_SELECT, 0); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_TCFP, 0); - rt2x00_set_field32(®, CSR14_TATIMW, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0); - rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - rt2x00mmio_register_write(rt2x00dev, CNT3, 0); - - rt2x00mmio_register_read(rt2x00dev, TXCSR8, ®); - rt2x00_set_field32(®, TXCSR8_BBP_ID0, 10); - rt2x00_set_field32(®, TXCSR8_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID1, 11); - rt2x00_set_field32(®, TXCSR8_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID2, 13); - rt2x00_set_field32(®, TXCSR8_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID3, 12); - rt2x00_set_field32(®, TXCSR8_BBP_ID3_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR8, reg); - - rt2x00mmio_register_read(rt2x00dev, ARTCSR0, ®); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_1MBS, 112); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_2MBS, 56); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_5_5MBS, 20); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_11MBS, 10); - rt2x00mmio_register_write(rt2x00dev, ARTCSR0, reg); - - rt2x00mmio_register_read(rt2x00dev, ARTCSR1, ®); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_6MBS, 45); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_9MBS, 37); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_12MBS, 33); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_18MBS, 29); - rt2x00mmio_register_write(rt2x00dev, ARTCSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, ARTCSR2, ®); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_24MBS, 29); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_36MBS, 25); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_48MBS, 25); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_54MBS, 25); - rt2x00mmio_register_write(rt2x00dev, ARTCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, RXCSR3, ®); - rt2x00_set_field32(®, RXCSR3_BBP_ID0, 47); /* CCK Signal */ - rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID1, 51); /* Rssi */ - rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID2, 42); /* OFDM Rate */ - rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID3, 51); /* RSSI */ - rt2x00_set_field32(®, RXCSR3_BBP_ID3_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR3, reg); - - rt2x00mmio_register_read(rt2x00dev, PCICSR, ®); - rt2x00_set_field32(®, PCICSR_BIG_ENDIAN, 0); - rt2x00_set_field32(®, PCICSR_RX_TRESHOLD, 0); - rt2x00_set_field32(®, PCICSR_TX_TRESHOLD, 3); - rt2x00_set_field32(®, PCICSR_BURST_LENTH, 1); - rt2x00_set_field32(®, PCICSR_ENABLE_CLK, 1); - rt2x00_set_field32(®, PCICSR_READ_MULTIPLE, 1); - rt2x00_set_field32(®, PCICSR_WRITE_INVALID, 1); - rt2x00mmio_register_write(rt2x00dev, PCICSR, reg); - - rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); - - rt2x00mmio_register_write(rt2x00dev, GPIOCSR, 0x0000ff00); - rt2x00mmio_register_write(rt2x00dev, TESTCSR, 0x000000f0); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00mmio_register_write(rt2x00dev, MACCSR0, 0x00213223); - rt2x00mmio_register_write(rt2x00dev, MACCSR1, 0x00235518); - - rt2x00mmio_register_read(rt2x00dev, MACCSR2, ®); - rt2x00_set_field32(®, MACCSR2_DELAY, 64); - rt2x00mmio_register_write(rt2x00dev, MACCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, RALINKCSR, ®); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 26); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID0, 1); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 26); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID1, 1); - rt2x00mmio_register_write(rt2x00dev, RALINKCSR, reg); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR1, 0x82188200); - - rt2x00mmio_register_write(rt2x00dev, TXACKCSR0, 0x00000020); - - rt2x00mmio_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, CSR1_BBP_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 0); - rt2x00mmio_register_write(rt2x00dev, CSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 1); - rt2x00mmio_register_write(rt2x00dev, CSR1, reg); - - /* - * We must clear the FCS and FIFO error count. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, ®); - rt2x00mmio_register_read(rt2x00dev, CNT4, ®); - - return 0; -} - -static int rt2500pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} - -static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt2500pci_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2500pci_bbp_write(rt2x00dev, 3, 0x02); - rt2500pci_bbp_write(rt2x00dev, 4, 0x19); - rt2500pci_bbp_write(rt2x00dev, 14, 0x1c); - rt2500pci_bbp_write(rt2x00dev, 15, 0x30); - rt2500pci_bbp_write(rt2x00dev, 16, 0xac); - rt2500pci_bbp_write(rt2x00dev, 18, 0x18); - rt2500pci_bbp_write(rt2x00dev, 19, 0xff); - rt2500pci_bbp_write(rt2x00dev, 20, 0x1e); - rt2500pci_bbp_write(rt2x00dev, 21, 0x08); - rt2500pci_bbp_write(rt2x00dev, 22, 0x08); - rt2500pci_bbp_write(rt2x00dev, 23, 0x08); - rt2500pci_bbp_write(rt2x00dev, 24, 0x70); - rt2500pci_bbp_write(rt2x00dev, 25, 0x40); - rt2500pci_bbp_write(rt2x00dev, 26, 0x08); - rt2500pci_bbp_write(rt2x00dev, 27, 0x23); - rt2500pci_bbp_write(rt2x00dev, 30, 0x10); - rt2500pci_bbp_write(rt2x00dev, 31, 0x2b); - rt2500pci_bbp_write(rt2x00dev, 32, 0xb9); - rt2500pci_bbp_write(rt2x00dev, 34, 0x12); - rt2500pci_bbp_write(rt2x00dev, 35, 0x50); - rt2500pci_bbp_write(rt2x00dev, 39, 0xc4); - rt2500pci_bbp_write(rt2x00dev, 40, 0x02); - rt2500pci_bbp_write(rt2x00dev, 41, 0x60); - rt2500pci_bbp_write(rt2x00dev, 53, 0x10); - rt2500pci_bbp_write(rt2x00dev, 54, 0x18); - rt2500pci_bbp_write(rt2x00dev, 56, 0x08); - rt2500pci_bbp_write(rt2x00dev, 57, 0x10); - rt2500pci_bbp_write(rt2x00dev, 58, 0x08); - rt2500pci_bbp_write(rt2x00dev, 61, 0x6d); - rt2500pci_bbp_write(rt2x00dev, 62, 0x10); - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2500pci_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int mask = (state == STATE_RADIO_IRQ_OFF); - u32 reg; - unsigned long flags; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00mmio_register_read(rt2x00dev, CSR7, ®); - rt2x00mmio_register_write(rt2x00dev, CSR7, reg); - } - - /* - * Only toggle the interrupts bits we are going to use. - * Non-checked interrupt bits are disabled by default. - */ - spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); - rt2x00_set_field32(®, CSR8_RXDONE, mask); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); - - if (state == STATE_RADIO_IRQ_OFF) { - /* - * Ensure that all tasklets are finished. - */ - tasklet_kill(&rt2x00dev->txstatus_tasklet); - tasklet_kill(&rt2x00dev->rxdone_tasklet); - tasklet_kill(&rt2x00dev->tbtt_tasklet); - } -} - -static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (unlikely(rt2500pci_init_queues(rt2x00dev) || - rt2500pci_init_registers(rt2x00dev) || - rt2500pci_init_bbp(rt2x00dev))) - return -EIO; - - return 0; -} - -static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Disable power - */ - rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0); -} - -static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg, reg2; - unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®); - rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); - rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); - rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®2); - bbp_state = rt2x00_get_field32(reg2, PWRCSR1_BBP_CURR_STATE); - rf_state = rt2x00_get_field32(reg2, PWRCSR1_RF_CURR_STATE); - if (bbp_state == state && rf_state == state) - return 0; - rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); - msleep(10); - } - - return -EBUSY; -} - -static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2500pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt2500pci_disable_radio(rt2x00dev); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - rt2500pci_toggle_irq(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2500pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt2500pci_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *txd = entry_priv->desc; - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W2_AIFS, entry->queue->aifs); - rt2x00_set_field32(&word, TXD_W2_CWMIN, entry->queue->cw_min); - rt2x00_set_field32(&word, TXD_W2_CWMAX, entry->queue->cw_max); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 3, &word); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->u.plcp.signal); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->u.plcp.service); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, - txdesc->u.plcp.length_low); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, - txdesc->u.plcp.length_high); - rt2x00_desc_write(txd, 3, word); - - rt2x00_desc_read(txd, 10, &word); - rt2x00_set_field32(&word, TXD_W10_RTS, - test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)); - rt2x00_desc_write(txd, 10, word); - - /* - * Writing TXD word 0 must the last to prevent a race condition with - * the device, whereby the device may take hold of the TXD before we - * finished updating it. - */ - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - (txdesc->rate_mode == RATE_MODE_OFDM)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); - rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); - rt2x00_desc_write(txd, 0, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->desc = txd; - skbdesc->desc_len = TXD_DESC_SIZE; -} - -/* - * TX data initialization - */ -static void rt2500pci_write_beacon(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - u32 reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - if (rt2x00queue_map_txskb(entry)) { - rt2x00_err(rt2x00dev, "Fail to map beacon, aborting\n"); - goto out; - } - - /* - * Write the TX descriptor for the beacon. - */ - rt2500pci_write_tx_desc(entry, txdesc); - - /* - * Dump beacon to userspace through debugfs. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -out: - /* - * Enable beaconing again. - */ - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); -} - -/* - * RX control handlers - */ -static void rt2500pci_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word0; - u32 word2; - - rt2x00_desc_read(entry_priv->desc, 0, &word0); - rt2x00_desc_read(entry_priv->desc, 2, &word2); - - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - /* - * Obtain the status about this packet. - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 100kbit/s. - */ - rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - - entry->queue->rt2x00dev->rssi_offset; - rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - if (rt2x00_get_field32(word0, RXD_W0_OFDM)) - rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; - else - rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; - if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; -} - -/* - * Interrupt functions. - */ -static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue_idx) -{ - struct data_queue *queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); - struct queue_entry_priv_mmio *entry_priv; - struct queue_entry *entry; - struct txdone_entry_desc txdesc; - u32 word; - - while (!rt2x00queue_empty(queue)) { - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - entry_priv = entry->priv_data; - rt2x00_desc_read(entry_priv->desc, 0, &word); - - if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - !rt2x00_get_field32(word, TXD_W0_VALID)) - break; - - /* - * Obtain the status about this packet. - */ - txdesc.flags = 0; - switch (rt2x00_get_field32(word, TXD_W0_RESULT)) { - case 0: /* Success */ - case 1: /* Success with retry */ - __set_bit(TXDONE_SUCCESS, &txdesc.flags); - break; - case 2: /* Failure, excessive retries */ - __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); - /* Don't break, this is a failed frame! */ - default: /* Failure */ - __set_bit(TXDONE_FAILURE, &txdesc.flags); - } - txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - - rt2x00lib_txdone(entry, &txdesc); - } -} - -static inline void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) -{ - u32 reg; - - /* - * Enable a single interrupt. The interrupt mask register - * access needs locking. - */ - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, irq_field, 0); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); -} - -static void rt2500pci_txstatus_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - u32 reg; - - /* - * Handle all tx queues. - */ - rt2500pci_txdone(rt2x00dev, QID_ATIM); - rt2500pci_txdone(rt2x00dev, QID_AC_VO); - rt2500pci_txdone(rt2x00dev, QID_AC_VI); - - /* - * Enable all TXDONE interrupts again. - */ - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) { - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, 0); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); - } -} - -static void rt2500pci_tbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00lib_beacondone(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2500pci_enable_interrupt(rt2x00dev, CSR8_TBCN_EXPIRE); -} - -static void rt2500pci_rxdone_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2x00mmio_rxdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); -} - -static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg, mask; - - /* - * Get the interrupt sources & saved to local variable. - * Write register value back to clear pending interrupts. - */ - rt2x00mmio_register_read(rt2x00dev, CSR7, ®); - rt2x00mmio_register_write(rt2x00dev, CSR7, reg); - - if (!reg) - return IRQ_NONE; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - mask = reg; - - /* - * Schedule tasklets for interrupt handling. - */ - if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) - tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); - - if (rt2x00_get_field32(reg, CSR7_RXDONE)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - - if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING) || - rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING) || - rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) { - tasklet_schedule(&rt2x00dev->txstatus_tasklet); - /* - * Mask out all txdone interrupts. - */ - rt2x00_set_field32(&mask, CSR8_TXDONE_TXRING, 1); - rt2x00_set_field32(&mask, CSR8_TXDONE_ATIMRING, 1); - rt2x00_set_field32(&mask, CSR8_TXDONE_PRIORING, 1); - } - - /* - * Disable all interrupts for which a tasklet was scheduled right now, - * the tasklet will reenable the appropriate interrupts. - */ - spin_lock(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - reg |= mask; - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock(&rt2x00dev->irqmask_lock); - - return IRQ_HANDLED; -} - -/* - * Device probe functions. - */ -static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - u16 word; - u8 *mac; - - rt2x00mmio_register_read(rt2x00dev, CSR21, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt2500pci_eepromregister_read; - eeprom.register_write = rt2500pci_eepromregister_write; - eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? - PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - eth_random_addr(mac); - rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, - ANTENNA_SW_DIVERSITY); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, - ANTENNA_SW_DIVERSITY); - rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, - LED_MODE_DEFAULT); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, - DEFAULT_RSSI_OFFSET); - rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); - rt2x00_eeprom_dbg(rt2x00dev, "Calibrate offset: 0x%04x\n", - word); - } - - return 0; -} - -static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00mmio_register_read(rt2x00dev, CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2560, value, - rt2x00_get_field32(reg, CSR0_REVISION)); - - if (!rt2x00_rf(rt2x00dev, RF2522) && - !rt2x00_rf(rt2x00dev, RF2523) && - !rt2x00_rf(rt2x00dev, RF2524) && - !rt2x00_rf(rt2x00dev, RF2525) && - !rt2x00_rf(rt2x00dev, RF2525E) && - !rt2x00_rf(rt2x00dev, RF5222)) { - rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Store led mode, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - if (value == LED_MODE_TXRX_ACTIVITY || - value == LED_MODE_DEFAULT || - value == LED_MODE_ASUS) - rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_ACTIVITY); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) { - __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); - /* - * On this device RFKILL initialized during probe does not work. - */ - __set_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags); - } - - /* - * Check if the BBP tuning should be enabled. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - - /* - * Read the RSSI <-> dBm offset information. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); - rt2x00dev->rssi_offset = - rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); - - return 0; -} - -/* - * RF value list for RF2522 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2522[] = { - { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, - { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, - { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, - { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, - { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, - { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, - { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, - { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, - { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, - { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, - { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, - { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, - { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, - { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, -}; - -/* - * RF value list for RF2523 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2523[] = { - { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, - { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, - { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, - { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, - { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, - { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, - { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, - { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, - { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, - { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, - { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, - { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, - { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, - { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, -}; - -/* - * RF value list for RF2524 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2524[] = { - { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, - { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, - { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, - { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, - { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, - { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, - { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, - { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, - { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, - { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, - { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, - { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, - { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, - { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, -}; - -/* - * RF value list for RF2525 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525[] = { - { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, - { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, - { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, - { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, - { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, - { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, - { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, - { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, - { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, - { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, - { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, - { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, - { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, - { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, -}; - -/* - * RF value list for RF2525e - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525e[] = { - { 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b }, - { 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b }, - { 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b }, - { 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b }, - { 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b }, - { 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b }, - { 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b }, - { 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b }, - { 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b }, - { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b }, - { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b }, - { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b }, - { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b }, - { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b }, -}; - -/* - * RF value list for RF5222 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5222[] = { - { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, - { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, - { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, - { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, - { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, - { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, - { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, - { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, - { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, - { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, - { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, - { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, - { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, - { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, - { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, - { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, - { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, - { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, - { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, - { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, - { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, - { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, - { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, - { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, - { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, - { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, - { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, - { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, - { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, - { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, - - /* 802.11 UNII */ - { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, - { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, - { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, - { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, - { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, -}; - -static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power; - unsigned int i; - - /* - * Initialize all hw fields. - */ - ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); - ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING); - ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Disable powersaving as default. - */ - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(rt2x00dev, RF2522)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); - spec->channels = rf_vals_bg_2522; - } else if (rt2x00_rf(rt2x00dev, RF2523)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); - spec->channels = rf_vals_bg_2523; - } else if (rt2x00_rf(rt2x00dev, RF2524)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); - spec->channels = rf_vals_bg_2524; - } else if (rt2x00_rf(rt2x00dev, RF2525)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); - spec->channels = rf_vals_bg_2525; - } else if (rt2x00_rf(rt2x00dev, RF2525E)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); - spec->channels = rf_vals_bg_2525e; - } else if (rt2x00_rf(rt2x00dev, RF5222)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_5222); - spec->channels = rf_vals_5222; - } - - /* - * Create channel information array - */ - info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); - } - - if (spec->num_channels > 14) { - for (i = 14; i < spec->num_channels; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = DEFAULT_TXPOWER; - } - } - - return 0; -} - -static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u32 reg; - - /* - * Allocate eeprom data. - */ - retval = rt2500pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2500pci_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); - rt2x00_set_field32(®, GPIOCSR_DIR0, 1); - rt2x00mmio_register_write(rt2x00dev, GPIOCSR, reg); - - /* - * Initialize hw specifications. - */ - retval = rt2500pci_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device requires the atim queue and DMA-mapped skbs. - */ - __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR17, ®); - tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; - rt2x00mmio_register_read(rt2x00dev, CSR16, ®); - tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); - - return tsf; -} - -static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR15, ®); - return rt2x00_get_field32(reg, CSR15_BEACON_SENT); -} - -static const struct ieee80211_ops rt2500pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, - .get_tsf = rt2500pci_get_tsf, - .tx_last_beacon = rt2500pci_tx_last_beacon, - .rfkill_poll = rt2x00mac_rfkill_poll, - .flush = rt2x00mac_flush, - .set_antenna = rt2x00mac_set_antenna, - .get_antenna = rt2x00mac_get_antenna, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { - .irq_handler = rt2500pci_interrupt, - .txstatus_tasklet = rt2500pci_txstatus_tasklet, - .tbtt_tasklet = rt2500pci_tbtt_tasklet, - .rxdone_tasklet = rt2500pci_rxdone_tasklet, - .probe_hw = rt2500pci_probe_hw, - .initialize = rt2x00mmio_initialize, - .uninitialize = rt2x00mmio_uninitialize, - .get_entry_state = rt2500pci_get_entry_state, - .clear_entry = rt2500pci_clear_entry, - .set_device_state = rt2500pci_set_device_state, - .rfkill_poll = rt2500pci_rfkill_poll, - .link_stats = rt2500pci_link_stats, - .reset_tuner = rt2500pci_reset_tuner, - .link_tuner = rt2500pci_link_tuner, - .start_queue = rt2500pci_start_queue, - .kick_queue = rt2500pci_kick_queue, - .stop_queue = rt2500pci_stop_queue, - .flush_queue = rt2x00mmio_flush_queue, - .write_tx_desc = rt2500pci_write_tx_desc, - .write_beacon = rt2500pci_write_beacon, - .fill_rxdone = rt2500pci_fill_rxdone, - .config_filter = rt2500pci_config_filter, - .config_intf = rt2500pci_config_intf, - .config_erp = rt2500pci_config_erp, - .config_ant = rt2500pci_config_ant, - .config = rt2500pci_config, -}; - -static void rt2500pci_queue_init(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_RX: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = RXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_BEACON: - queue->limit = 1; - queue->data_size = MGMT_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_ATIM: - queue->limit = 8; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - default: - BUG(); - break; - } -} - -static const struct rt2x00_ops rt2500pci_ops = { - .name = KBUILD_MODNAME, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt2500pci_queue_init, - .lib = &rt2500pci_rt2x00_ops, - .hw = &rt2500pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500pci_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT2500pci module information. - */ -static const struct pci_device_id rt2500pci_device_table[] = { - { PCI_DEVICE(0x1814, 0x0201) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards"); -MODULE_DEVICE_TABLE(pci, rt2500pci_device_table); -MODULE_LICENSE("GPL"); - -static int rt2500pci_probe(struct pci_dev *pci_dev, - const struct pci_device_id *id) -{ - return rt2x00pci_probe(pci_dev, &rt2500pci_ops); -} - -static struct pci_driver rt2500pci_driver = { - .name = KBUILD_MODNAME, - .id_table = rt2500pci_device_table, - .probe = rt2500pci_probe, - .remove = rt2x00pci_remove, - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -module_pci_driver(rt2500pci_driver); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h deleted file mode 100644 index 573e87bcc553..000000000000 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ /dev/null @@ -1,1235 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2500pci - Abstract: Data structures and registers for the rt2500pci module. - Supported chipsets: RT2560. - */ - -#ifndef RT2500PCI_H -#define RT2500PCI_H - -/* - * RF chip defines. - */ -#define RF2522 0x0000 -#define RF2523 0x0001 -#define RF2524 0x0002 -#define RF2525 0x0003 -#define RF2525E 0x0004 -#define RF5222 0x0010 - -/* - * RT2560 version - */ -#define RT2560_VERSION_B 2 -#define RT2560_VERSION_C 3 -#define RT2560_VERSION_D 4 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 121 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x0000 -#define CSR_REG_SIZE 0x0174 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0200 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0040 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 2 - -/* - * Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * CSR0: ASIC revision number. - */ -#define CSR0 0x0000 -#define CSR0_REVISION FIELD32(0x0000ffff) - -/* - * CSR1: System control register. - * SOFT_RESET: Software reset, 1: reset, 0: normal. - * BBP_RESET: Hardware reset, 1: reset, 0, release. - * HOST_READY: Host ready after initialization. - */ -#define CSR1 0x0004 -#define CSR1_SOFT_RESET FIELD32(0x00000001) -#define CSR1_BBP_RESET FIELD32(0x00000002) -#define CSR1_HOST_READY FIELD32(0x00000004) - -/* - * CSR2: System admin status register (invalid). - */ -#define CSR2 0x0008 - -/* - * CSR3: STA MAC address register 0. - */ -#define CSR3 0x000c -#define CSR3_BYTE0 FIELD32(0x000000ff) -#define CSR3_BYTE1 FIELD32(0x0000ff00) -#define CSR3_BYTE2 FIELD32(0x00ff0000) -#define CSR3_BYTE3 FIELD32(0xff000000) - -/* - * CSR4: STA MAC address register 1. - */ -#define CSR4 0x0010 -#define CSR4_BYTE4 FIELD32(0x000000ff) -#define CSR4_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR5: BSSID register 0. - */ -#define CSR5 0x0014 -#define CSR5_BYTE0 FIELD32(0x000000ff) -#define CSR5_BYTE1 FIELD32(0x0000ff00) -#define CSR5_BYTE2 FIELD32(0x00ff0000) -#define CSR5_BYTE3 FIELD32(0xff000000) - -/* - * CSR6: BSSID register 1. - */ -#define CSR6 0x0018 -#define CSR6_BYTE4 FIELD32(0x000000ff) -#define CSR6_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR7: Interrupt source register. - * Write 1 to clear. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - * DECRYPTION_DONE: Decryption done interrupt. - * ENCRYPTION_DONE: Encryption done interrupt. - * UART1_TX_TRESHOLD: UART1 TX reaches threshold. - * UART1_RX_TRESHOLD: UART1 RX reaches threshold. - * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. - * UART1_TX_BUFF_ERROR: UART1 TX buffer error. - * UART1_RX_BUFF_ERROR: UART1 RX buffer error. - * UART2_TX_TRESHOLD: UART2 TX reaches threshold. - * UART2_RX_TRESHOLD: UART2 RX reaches threshold. - * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. - * UART2_TX_BUFF_ERROR: UART2 TX buffer error. - * UART2_RX_BUFF_ERROR: UART2 RX buffer error. - * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). - - */ -#define CSR7 0x001c -#define CSR7_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR7_TXDONE_TXRING FIELD32(0x00000008) -#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR7_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR7_RXDONE FIELD32(0x00000040) -#define CSR7_DECRYPTION_DONE FIELD32(0x00000080) -#define CSR7_ENCRYPTION_DONE FIELD32(0x00000100) -#define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200) -#define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400) -#define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800) -#define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000) -#define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000) -#define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000) -#define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000) -#define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000) -#define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000) -#define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000) -#define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000) - -/* - * CSR8: Interrupt mask register. - * Write 1 to mask interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - * DECRYPTION_DONE: Decryption done interrupt. - * ENCRYPTION_DONE: Encryption done interrupt. - * UART1_TX_TRESHOLD: UART1 TX reaches threshold. - * UART1_RX_TRESHOLD: UART1 RX reaches threshold. - * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. - * UART1_TX_BUFF_ERROR: UART1 TX buffer error. - * UART1_RX_BUFF_ERROR: UART1 RX buffer error. - * UART2_TX_TRESHOLD: UART2 TX reaches threshold. - * UART2_RX_TRESHOLD: UART2 RX reaches threshold. - * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. - * UART2_TX_BUFF_ERROR: UART2 TX buffer error. - * UART2_RX_BUFF_ERROR: UART2 RX buffer error. - * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). - */ -#define CSR8 0x0020 -#define CSR8_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR8_TXDONE_TXRING FIELD32(0x00000008) -#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR8_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR8_RXDONE FIELD32(0x00000040) -#define CSR8_DECRYPTION_DONE FIELD32(0x00000080) -#define CSR8_ENCRYPTION_DONE FIELD32(0x00000100) -#define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200) -#define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400) -#define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800) -#define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000) -#define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000) -#define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000) -#define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000) -#define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000) -#define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000) -#define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000) -#define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000) - -/* - * CSR9: Maximum frame length register. - * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. - */ -#define CSR9 0x0024 -#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) - -/* - * SECCSR0: WEP control register. - * KICK_DECRYPT: Kick decryption engine, self-clear. - * ONE_SHOT: 0: ring mode, 1: One shot only mode. - * DESC_ADDRESS: Descriptor physical address of frame. - */ -#define SECCSR0 0x0028 -#define SECCSR0_KICK_DECRYPT FIELD32(0x00000001) -#define SECCSR0_ONE_SHOT FIELD32(0x00000002) -#define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc) - -/* - * CSR11: Back-off control register. - * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). - * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). - * SLOT_TIME: Slot time, default is 20us for 802.11b - * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD. - * LONG_RETRY: Long retry count. - * SHORT_RETRY: Short retry count. - */ -#define CSR11 0x002c -#define CSR11_CWMIN FIELD32(0x0000000f) -#define CSR11_CWMAX FIELD32(0x000000f0) -#define CSR11_SLOT_TIME FIELD32(0x00001f00) -#define CSR11_CW_SELECT FIELD32(0x00002000) -#define CSR11_LONG_RETRY FIELD32(0x00ff0000) -#define CSR11_SHORT_RETRY FIELD32(0xff000000) - -/* - * CSR12: Synchronization configuration register 0. - * All units in 1/16 TU. - * BEACON_INTERVAL: Beacon interval, default is 100 TU. - * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU. - */ -#define CSR12 0x0030 -#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) -#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) - -/* - * CSR13: Synchronization configuration register 1. - * All units in 1/16 TU. - * ATIMW_DURATION: Atim window duration. - * CFP_PERIOD: Cfp period, default is 0 TU. - */ -#define CSR13 0x0034 -#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) -#define CSR13_CFP_PERIOD FIELD32(0x00ff0000) - -/* - * CSR14: Synchronization control register. - * TSF_COUNT: Enable tsf auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * TBCN: Enable tbcn with reload value. - * TCFP: Enable tcfp & cfp / cp switching. - * TATIMW: Enable tatimw & atim window switching. - * BEACON_GEN: Enable beacon generator. - * CFP_COUNT_PRELOAD: Cfp count preload value. - * TBCM_PRELOAD: Tbcn preload value in units of 64us. - */ -#define CSR14 0x0038 -#define CSR14_TSF_COUNT FIELD32(0x00000001) -#define CSR14_TSF_SYNC FIELD32(0x00000006) -#define CSR14_TBCN FIELD32(0x00000008) -#define CSR14_TCFP FIELD32(0x00000010) -#define CSR14_TATIMW FIELD32(0x00000020) -#define CSR14_BEACON_GEN FIELD32(0x00000040) -#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) -#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) - -/* - * CSR15: Synchronization status register. - * CFP: ASIC is in contention-free period. - * ATIMW: ASIC is in ATIM window. - * BEACON_SENT: Beacon is send. - */ -#define CSR15 0x003c -#define CSR15_CFP FIELD32(0x00000001) -#define CSR15_ATIMW FIELD32(0x00000002) -#define CSR15_BEACON_SENT FIELD32(0x00000004) - -/* - * CSR16: TSF timer register 0. - */ -#define CSR16 0x0040 -#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR17: TSF timer register 1. - */ -#define CSR17 0x0044 -#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR18: IFS timer register 0. - * SIFS: Sifs, default is 10 us. - * PIFS: Pifs, default is 30 us. - */ -#define CSR18 0x0048 -#define CSR18_SIFS FIELD32(0x000001ff) -#define CSR18_PIFS FIELD32(0x001f0000) - -/* - * CSR19: IFS timer register 1. - * DIFS: Difs, default is 50 us. - * EIFS: Eifs, default is 364 us. - */ -#define CSR19 0x004c -#define CSR19_DIFS FIELD32(0x0000ffff) -#define CSR19_EIFS FIELD32(0xffff0000) - -/* - * CSR20: Wakeup timer register. - * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * AUTOWAKE: Enable auto wakeup / sleep mechanism. - */ -#define CSR20 0x0050 -#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) -#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) -#define CSR20_AUTOWAKE FIELD32(0x01000000) - -/* - * CSR21: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - */ -#define CSR21 0x0054 -#define CSR21_RELOAD FIELD32(0x00000001) -#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) -#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) -#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) -#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) -#define CSR21_TYPE_93C46 FIELD32(0x00000020) - -/* - * CSR22: CFP control register. - * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. - * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. - */ -#define CSR22 0x0058 -#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) -#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) - -/* - * Transmit related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXCSR0: TX Control Register. - * KICK_TX: Kick tx ring. - * KICK_ATIM: Kick atim ring. - * KICK_PRIO: Kick priority ring. - * ABORT: Abort all transmit related ring operation. - */ -#define TXCSR0 0x0060 -#define TXCSR0_KICK_TX FIELD32(0x00000001) -#define TXCSR0_KICK_ATIM FIELD32(0x00000002) -#define TXCSR0_KICK_PRIO FIELD32(0x00000004) -#define TXCSR0_ABORT FIELD32(0x00000008) - -/* - * TXCSR1: TX Configuration Register. - * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. - * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. - * TSF_OFFSET: Insert tsf offset. - * AUTORESPONDER: Enable auto responder which include ack & cts. - */ -#define TXCSR1 0x0064 -#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) -#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) -#define TXCSR1_AUTORESPONDER FIELD32(0x01000000) - -/* - * TXCSR2: Tx descriptor configuration register. - * TXD_SIZE: Tx descriptor size, default is 48. - * NUM_TXD: Number of tx entries in ring. - * NUM_ATIM: Number of atim entries in ring. - * NUM_PRIO: Number of priority entries in ring. - */ -#define TXCSR2 0x0068 -#define TXCSR2_TXD_SIZE FIELD32(0x000000ff) -#define TXCSR2_NUM_TXD FIELD32(0x0000ff00) -#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) -#define TXCSR2_NUM_PRIO FIELD32(0xff000000) - -/* - * TXCSR3: TX Ring Base address register. - */ -#define TXCSR3 0x006c -#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR4: TX Atim Ring Base address register. - */ -#define TXCSR4 0x0070 -#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR5: TX Prio Ring Base address register. - */ -#define TXCSR5 0x0074 -#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR6: Beacon Base address register. - */ -#define TXCSR6 0x0078 -#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR7: Auto responder control register. - * AR_POWERMANAGEMENT: Auto responder power management bit. - */ -#define TXCSR7 0x007c -#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) - -/* - * TXCSR8: CCK Tx BBP register. - */ -#define TXCSR8 0x0098 -#define TXCSR8_BBP_ID0 FIELD32(0x0000007f) -#define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080) -#define TXCSR8_BBP_ID1 FIELD32(0x00007f00) -#define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000) -#define TXCSR8_BBP_ID2 FIELD32(0x007f0000) -#define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000) -#define TXCSR8_BBP_ID3 FIELD32(0x7f000000) -#define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXCSR9: OFDM TX BBP registers - * OFDM_SIGNAL: BBP rate field address for OFDM. - * OFDM_SERVICE: BBP service field address for OFDM. - * OFDM_LENGTH_LOW: BBP length low byte address for OFDM. - * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM. - */ -#define TXCSR9 0x0094 -#define TXCSR9_OFDM_RATE FIELD32(0x000000ff) -#define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00) -#define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000) -#define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Receive related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * RXCSR0: RX Control Register. - * DISABLE_RX: Disable rx engine. - * DROP_CRC: Drop crc error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TODS: Drop frame tods bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * PASS_CRC: Pass all packets with crc attached. - * PASS_CRC: Pass all packets with crc attached. - * PASS_PLCP: Pass all packets with 4 bytes PLCP attached. - * DROP_MCAST: Drop multicast frames. - * DROP_BCAST: Drop broadcast frames. - * ENABLE_QOS: Accept QOS data frame and parse QOS field. - */ -#define RXCSR0 0x0080 -#define RXCSR0_DISABLE_RX FIELD32(0x00000001) -#define RXCSR0_DROP_CRC FIELD32(0x00000002) -#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) -#define RXCSR0_DROP_CONTROL FIELD32(0x00000008) -#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) -#define RXCSR0_DROP_TODS FIELD32(0x00000020) -#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) -#define RXCSR0_PASS_CRC FIELD32(0x00000080) -#define RXCSR0_PASS_PLCP FIELD32(0x00000100) -#define RXCSR0_DROP_MCAST FIELD32(0x00000200) -#define RXCSR0_DROP_BCAST FIELD32(0x00000400) -#define RXCSR0_ENABLE_QOS FIELD32(0x00000800) - -/* - * RXCSR1: RX descriptor configuration register. - * RXD_SIZE: Rx descriptor size, default is 32b. - * NUM_RXD: Number of rx entries in ring. - */ -#define RXCSR1 0x0084 -#define RXCSR1_RXD_SIZE FIELD32(0x000000ff) -#define RXCSR1_NUM_RXD FIELD32(0x0000ff00) - -/* - * RXCSR2: RX Ring base address register. - */ -#define RXCSR2 0x0088 -#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) - -/* - * RXCSR3: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR3 0x0090 -#define RXCSR3_BBP_ID0 FIELD32(0x0000007f) -#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define RXCSR3_BBP_ID1 FIELD32(0x00007f00) -#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define RXCSR3_BBP_ID2 FIELD32(0x007f0000) -#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define RXCSR3_BBP_ID3 FIELD32(0x7f000000) -#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * ARCSR1: Auto Responder PLCP config register 1. - * AR_BBP_DATA#: Auto responder BBP register # data. - * AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR1 0x009c -#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) -#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) -#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) -#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) - -/* - * Miscellaneous Registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - - */ - -/* - * PCICSR: PCI control register. - * BIG_ENDIAN: 1: big endian, 0: little endian. - * RX_TRESHOLD: Rx threshold in dw to start pci access - * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. - * TX_TRESHOLD: Tx threshold in dw to start pci access - * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. - * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. - * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. - * READ_MULTIPLE: Enable memory read multiple. - * WRITE_INVALID: Enable memory write & invalid. - */ -#define PCICSR 0x008c -#define PCICSR_BIG_ENDIAN FIELD32(0x00000001) -#define PCICSR_RX_TRESHOLD FIELD32(0x00000006) -#define PCICSR_TX_TRESHOLD FIELD32(0x00000018) -#define PCICSR_BURST_LENTH FIELD32(0x00000060) -#define PCICSR_ENABLE_CLK FIELD32(0x00000080) -#define PCICSR_READ_MULTIPLE FIELD32(0x00000100) -#define PCICSR_WRITE_INVALID FIELD32(0x00000200) - -/* - * CNT0: FCS error count. - * FCS_ERROR: FCS error count, cleared when read. - */ -#define CNT0 0x00a0 -#define CNT0_FCS_ERROR FIELD32(0x0000ffff) - -/* - * Statistic Register. - * CNT1: PLCP error count. - * CNT2: Long error count. - */ -#define TIMECSR2 0x00a8 -#define CNT1 0x00ac -#define CNT2 0x00b0 -#define TIMECSR3 0x00b4 - -/* - * CNT3: CCA false alarm count. - */ -#define CNT3 0x00b8 -#define CNT3_FALSE_CCA FIELD32(0x0000ffff) - -/* - * Statistic Register. - * CNT4: Rx FIFO overflow count. - * CNT5: Tx FIFO underrun count. - */ -#define CNT4 0x00bc -#define CNT5 0x00c0 - -/* - * Baseband Control Register. - */ - -/* - * PWRCSR0: Power mode configuration register. - */ -#define PWRCSR0 0x00c4 - -/* - * Power state transition time registers. - */ -#define PSCSR0 0x00c8 -#define PSCSR1 0x00cc -#define PSCSR2 0x00d0 -#define PSCSR3 0x00d4 - -/* - * PWRCSR1: Manual power control / status register. - * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. - * SET_STATE: Set state. Write 1 to trigger, self cleared. - * BBP_DESIRE_STATE: BBP desired state. - * RF_DESIRE_STATE: RF desired state. - * BBP_CURR_STATE: BBP current state. - * RF_CURR_STATE: RF current state. - * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. - */ -#define PWRCSR1 0x00d8 -#define PWRCSR1_SET_STATE FIELD32(0x00000001) -#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) -#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) -#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) -#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) -#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) - -/* - * TIMECSR: Timer control register. - * US_COUNT: 1 us timer count in units of clock cycles. - * US_64_COUNT: 64 us timer count in units of 1 us timer. - * BEACON_EXPECT: Beacon expect window. - */ -#define TIMECSR 0x00dc -#define TIMECSR_US_COUNT FIELD32(0x000000ff) -#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) -#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) - -/* - * MACCSR0: MAC configuration register 0. - */ -#define MACCSR0 0x00e0 - -/* - * MACCSR1: MAC configuration register 1. - * KICK_RX: Kick one-shot rx in one-shot rx mode. - * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. - * BBPRX_RESET_MODE: Ralink bbp rx reset mode. - * AUTO_TXBBP: Auto tx logic access bbp control register. - * AUTO_RXBBP: Auto rx logic access bbp control register. - * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. - * INTERSIL_IF: Intersil if calibration pin. - */ -#define MACCSR1 0x00e4 -#define MACCSR1_KICK_RX FIELD32(0x00000001) -#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) -#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) -#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) -#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) -#define MACCSR1_LOOPBACK FIELD32(0x00000060) -#define MACCSR1_INTERSIL_IF FIELD32(0x00000080) - -/* - * RALINKCSR: Ralink Rx auto-reset BBCR. - * AR_BBP_DATA#: Auto reset BBP register # data. - * AR_BBP_ID#: Auto reset BBP register # id. - */ -#define RALINKCSR 0x00e8 -#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) -#define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00) -#define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000) -#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000) -#define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000) - -/* - * BCNCSR: Beacon interval control register. - * CHANGE: Write one to change beacon interval. - * DELTATIME: The delta time value. - * NUM_BEACON: Number of beacon according to mode. - * MODE: Please refer to asic specs. - * PLUS: Plus or minus delta time value. - */ -#define BCNCSR 0x00ec -#define BCNCSR_CHANGE FIELD32(0x00000001) -#define BCNCSR_DELTATIME FIELD32(0x0000001e) -#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) -#define BCNCSR_MODE FIELD32(0x00006000) -#define BCNCSR_PLUS FIELD32(0x00008000) - -/* - * BBP / RF / IF Control Register. - */ - -/* - * BBPCSR: BBP serial control register. - * VALUE: Register value to program into BBP. - * REGNUM: Selected BBP register. - * BUSY: 1: asic is busy execute BBP programming. - * WRITE_CONTROL: 1: write BBP, 0: read BBP. - */ -#define BBPCSR 0x00f0 -#define BBPCSR_VALUE FIELD32(0x000000ff) -#define BBPCSR_REGNUM FIELD32(0x00007f00) -#define BBPCSR_BUSY FIELD32(0x00008000) -#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) - -/* - * RFCSR: RF serial control register. - * VALUE: Register value + id to program into rf/if. - * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). - * IF_SELECT: Chip to program: 0: rf, 1: if. - * PLL_LD: Rf pll_ld status. - * BUSY: 1: asic is busy execute rf programming. - */ -#define RFCSR 0x00f4 -#define RFCSR_VALUE FIELD32(0x00ffffff) -#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) -#define RFCSR_IF_SELECT FIELD32(0x20000000) -#define RFCSR_PLL_LD FIELD32(0x40000000) -#define RFCSR_BUSY FIELD32(0x80000000) - -/* - * LEDCSR: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * LINK: 0: linkoff, 1: linkup. - * ACTIVITY: 0: idle, 1: active. - * LINK_POLARITY: 0: active low, 1: active high. - * ACTIVITY_POLARITY: 0: active low, 1: active high. - * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF. - */ -#define LEDCSR 0x00f8 -#define LEDCSR_ON_PERIOD FIELD32(0x000000ff) -#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) -#define LEDCSR_LINK FIELD32(0x00010000) -#define LEDCSR_ACTIVITY FIELD32(0x00020000) -#define LEDCSR_LINK_POLARITY FIELD32(0x00040000) -#define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000) -#define LEDCSR_LED_DEFAULT FIELD32(0x00100000) - -/* - * SECCSR3: AES control register. - */ -#define SECCSR3 0x00fc - -/* - * ASIC pointer information. - * RXPTR: Current RX ring address. - * TXPTR: Current Tx ring address. - * PRIPTR: Current Priority ring address. - * ATIMPTR: Current ATIM ring address. - */ -#define RXPTR 0x0100 -#define TXPTR 0x0104 -#define PRIPTR 0x0108 -#define ATIMPTR 0x010c - -/* - * TXACKCSR0: TX ACK timeout. - */ -#define TXACKCSR0 0x0110 - -/* - * ACK timeout count registers. - * ACKCNT0: TX ACK timeout count. - * ACKCNT1: RX ACK timeout count. - */ -#define ACKCNT0 0x0114 -#define ACKCNT1 0x0118 - -/* - * GPIO and others. - */ - -/* - * GPIOCSR: GPIO control register. - * GPIOCSR_VALx: GPIO value - * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input - */ -#define GPIOCSR 0x0120 -#define GPIOCSR_VAL0 FIELD32(0x00000001) -#define GPIOCSR_VAL1 FIELD32(0x00000002) -#define GPIOCSR_VAL2 FIELD32(0x00000004) -#define GPIOCSR_VAL3 FIELD32(0x00000008) -#define GPIOCSR_VAL4 FIELD32(0x00000010) -#define GPIOCSR_VAL5 FIELD32(0x00000020) -#define GPIOCSR_VAL6 FIELD32(0x00000040) -#define GPIOCSR_VAL7 FIELD32(0x00000080) -#define GPIOCSR_DIR0 FIELD32(0x00000100) -#define GPIOCSR_DIR1 FIELD32(0x00000200) -#define GPIOCSR_DIR2 FIELD32(0x00000400) -#define GPIOCSR_DIR3 FIELD32(0x00000800) -#define GPIOCSR_DIR4 FIELD32(0x00001000) -#define GPIOCSR_DIR5 FIELD32(0x00002000) -#define GPIOCSR_DIR6 FIELD32(0x00004000) -#define GPIOCSR_DIR7 FIELD32(0x00008000) - -/* - * FIFO pointer registers. - * FIFOCSR0: TX FIFO pointer. - * FIFOCSR1: RX FIFO pointer. - */ -#define FIFOCSR0 0x0128 -#define FIFOCSR1 0x012c - -/* - * BCNCSR1: Tx BEACON offset time control register. - * PRELOAD: Beacon timer offset in units of usec. - * BEACON_CWMIN: 2^CwMin. - */ -#define BCNCSR1 0x0130 -#define BCNCSR1_PRELOAD FIELD32(0x0000ffff) -#define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000) - -/* - * MACCSR2: TX_PE to RX_PE turn-around time control register - * DELAY: RX_PE low width, in units of pci clock cycle. - */ -#define MACCSR2 0x0134 -#define MACCSR2_DELAY FIELD32(0x000000ff) - -/* - * TESTCSR: TEST mode selection register. - */ -#define TESTCSR 0x0138 - -/* - * ARCSR2: 1 Mbps ACK/CTS PLCP. - */ -#define ARCSR2 0x013c -#define ARCSR2_SIGNAL FIELD32(0x000000ff) -#define ARCSR2_SERVICE FIELD32(0x0000ff00) -#define ARCSR2_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR3: 2 Mbps ACK/CTS PLCP. - */ -#define ARCSR3 0x0140 -#define ARCSR3_SIGNAL FIELD32(0x000000ff) -#define ARCSR3_SERVICE FIELD32(0x0000ff00) -#define ARCSR3_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR4: 5.5 Mbps ACK/CTS PLCP. - */ -#define ARCSR4 0x0144 -#define ARCSR4_SIGNAL FIELD32(0x000000ff) -#define ARCSR4_SERVICE FIELD32(0x0000ff00) -#define ARCSR4_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR5: 11 Mbps ACK/CTS PLCP. - */ -#define ARCSR5 0x0148 -#define ARCSR5_SIGNAL FIELD32(0x000000ff) -#define ARCSR5_SERVICE FIELD32(0x0000ff00) -#define ARCSR5_LENGTH FIELD32(0xffff0000) - -/* - * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps. - */ -#define ARTCSR0 0x014c -#define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff) -#define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00) -#define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000) -#define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000) - - -/* - * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. - */ -#define ARTCSR1 0x0150 -#define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff) -#define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00) -#define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000) -#define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000) - -/* - * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. - */ -#define ARTCSR2 0x0154 -#define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff) -#define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00) -#define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000) -#define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000) - -/* - * SECCSR1: WEP control register. - * KICK_ENCRYPT: Kick encryption engine, self-clear. - * ONE_SHOT: 0: ring mode, 1: One shot only mode. - * DESC_ADDRESS: Descriptor physical address of frame. - */ -#define SECCSR1 0x0158 -#define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001) -#define SECCSR1_ONE_SHOT FIELD32(0x00000002) -#define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc) - -/* - * BBPCSR1: BBP TX configuration. - */ -#define BBPCSR1 0x015c -#define BBPCSR1_CCK FIELD32(0x00000003) -#define BBPCSR1_CCK_FLIP FIELD32(0x00000004) -#define BBPCSR1_OFDM FIELD32(0x00030000) -#define BBPCSR1_OFDM_FLIP FIELD32(0x00040000) - -/* - * Dual band configuration registers. - * DBANDCSR0: Dual band configuration register 0. - * DBANDCSR1: Dual band configuration register 1. - */ -#define DBANDCSR0 0x0160 -#define DBANDCSR1 0x0164 - -/* - * BBPPCSR: BBP Pin control register. - */ -#define BBPPCSR 0x0168 - -/* - * MAC special debug mode selection registers. - * DBGSEL0: MAC special debug mode selection register 0. - * DBGSEL1: MAC special debug mode selection register 1. - */ -#define DBGSEL0 0x016c -#define DBGSEL1 0x0170 - -/* - * BISTCSR: BBP BIST register. - */ -#define BISTCSR 0x0174 - -/* - * Multicast filter registers. - * MCAST0: Multicast filter register 0. - * MCAST1: Multicast filter register 1. - */ -#define MCAST0 0x0178 -#define MCAST1 0x017c - -/* - * UART registers. - * UARTCSR0: UART1 TX register. - * UARTCSR1: UART1 RX register. - * UARTCSR3: UART1 frame control register. - * UARTCSR4: UART1 buffer control register. - * UART2CSR0: UART2 TX register. - * UART2CSR1: UART2 RX register. - * UART2CSR3: UART2 frame control register. - * UART2CSR4: UART2 buffer control register. - */ -#define UARTCSR0 0x0180 -#define UARTCSR1 0x0184 -#define UARTCSR3 0x0188 -#define UARTCSR4 0x018c -#define UART2CSR0 0x0190 -#define UART2CSR1 0x0194 -#define UART2CSR3 0x0198 -#define UART2CSR4 0x019c - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2: TX antenna control - */ -#define BBP_R2_TX_ANTENNA FIELD8(0x03) -#define BBP_R2_TX_IQ_FLIP FIELD8(0x04) - -/* - * R14: RX antenna control - */ -#define BBP_R14_RX_ANTENNA FIELD8(0x03) -#define BBP_R14_RX_IQ_FLIP FIELD8(0x04) - -/* - * BBP_R70 - */ -#define BBP_R70_JAPAN_FILTER FIELD8(0x08) - -/* - * RF registers - */ - -/* - * RF 1 - */ -#define RF1_TUNER FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TUNER FIELD32(0x00000100) -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x10 -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * CARDBUS_ACCEL: 0: enable, 1: disable. - * DYN_BBP_TUNE: 0: enable, 1: disable. - * CCK_TX_POWER: CCK TX power compensation. - */ -#define EEPROM_NIC 0x11 -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) -#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) -#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) - -/* - * EEPROM geography. - * GEO: Default geography setting for device. - */ -#define EEPROM_GEOGRAPHY 0x12 -#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x13 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER - */ -#define EEPROM_TXPOWER_START 0x23 -#define EEPROM_TXPOWER_SIZE 7 -#define EEPROM_TXPOWER_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_2 FIELD16(0xff00) - -/* - * RSSI <-> dBm offset calibration - */ -#define EEPROM_CALIBRATE_OFFSET 0x3e -#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE (11 * sizeof(__le32)) -#define RXD_DESC_SIZE (11 * sizeof(__le32)) - -/* - * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_RESULT FIELD32(0x0000001c) -#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) -#define TXD_W0_MORE_FRAG FIELD32(0x00000100) -#define TXD_W0_ACK FIELD32(0x00000200) -#define TXD_W0_TIMESTAMP FIELD32(0x00000400) -#define TXD_W0_OFDM FIELD32(0x00000800) -#define TXD_W0_CIPHER_OWNER FIELD32(0x00001000) -#define TXD_W0_IFS FIELD32(0x00006000) -#define TXD_W0_RETRY_MODE FIELD32(0x00008000) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - */ -#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define TXD_W2_IV_OFFSET FIELD32(0x0000003f) -#define TXD_W2_AIFS FIELD32(0x000000c0) -#define TXD_W2_CWMIN FIELD32(0x00000f00) -#define TXD_W2_CWMAX FIELD32(0x0000f000) - -/* - * Word3: PLCP information - */ -#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word4 - */ -#define TXD_W4_IV FIELD32(0xffffffff) - -/* - * Word5 - */ -#define TXD_W5_EIV FIELD32(0xffffffff) - -/* - * Word6-9: Key - */ -#define TXD_W6_KEY FIELD32(0xffffffff) -#define TXD_W7_KEY FIELD32(0xffffffff) -#define TXD_W8_KEY FIELD32(0xffffffff) -#define TXD_W9_KEY FIELD32(0xffffffff) - -/* - * Word10 - */ -#define TXD_W10_RTS FIELD32(0x00000001) -#define TXD_W10_TX_RATE FIELD32(0x000000fe) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) -#define RXD_W0_MULTICAST FIELD32(0x00000004) -#define RXD_W0_BROADCAST FIELD32(0x00000008) -#define RXD_W0_MY_BSS FIELD32(0x00000010) -#define RXD_W0_CRC_ERROR FIELD32(0x00000020) -#define RXD_W0_OFDM FIELD32(0x00000040) -#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) -#define RXD_W0_CIPHER_OWNER FIELD32(0x00000100) -#define RXD_W0_ICV_ERROR FIELD32(0x00000200) -#define RXD_W0_IV_OFFSET FIELD32(0x0000fc00) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - */ -#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define RXD_W2_SIGNAL FIELD32(0x000000ff) -#define RXD_W2_RSSI FIELD32(0x0000ff00) -#define RXD_W2_TA FIELD32(0xffff0000) - -/* - * Word3 - */ -#define RXD_W3_TA FIELD32(0xffffffff) - -/* - * Word4 - */ -#define RXD_W4_IV FIELD32(0xffffffff) - -/* - * Word5 - */ -#define RXD_W5_EIV FIELD32(0xffffffff) - -/* - * Word6-9: Key - */ -#define RXD_W6_KEY FIELD32(0xffffffff) -#define RXD_W7_KEY FIELD32(0xffffffff) -#define RXD_W8_KEY FIELD32(0xffffffff) -#define RXD_W9_KEY FIELD32(0xffffffff) - -/* - * Word10 - */ -#define RXD_W10_DROP FIELD32(0x00000001) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ - (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) - -#endif /* RT2500PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c deleted file mode 100644 index b50d873145d5..000000000000 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ /dev/null @@ -1,2001 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2500usb - Abstract: rt2500usb device specific routines. - Supported chipsets: RT2570. - */ - -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/usb.h> - -#include "rt2x00.h" -#include "rt2x00usb.h" -#include "rt2500usb.h" - -/* - * Allow hardware encryption to be disabled. - */ -static bool modparam_nohwcrypt; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2500usb_register_read and rt2500usb_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_USB_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - * If the csr_mutex is already held then the _lock variants must - * be used instead. - */ -static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 *value) -{ - __le16 reg; - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(reg)); - *value = le16_to_cpu(reg); -} - -static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 *value) -{ - __le16 reg; - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); - *value = le16_to_cpu(reg); -} - -static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u16 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - value, length); -} - -static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 value) -{ - __le16 reg = cpu_to_le16(value); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(reg)); -} - -static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 value) -{ - __le16 reg = cpu_to_le16(value); - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); -} - -static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u16 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - value, length); -} - -static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - struct rt2x00_field16 field, - u16 *reg) -{ - unsigned int i; - - for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) { - rt2500usb_register_read_lock(rt2x00dev, offset, reg); - if (!rt2x00_get_field16(*reg, field)) - return 1; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "Indirect register access failed: offset=0x%.08x, value=0x%.08x\n", - offset, *reg); - *reg = ~0; - - return 0; -} - -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg)) - -static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u16 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_DATA, value); - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); - - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u16 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); - - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); - - if (WAIT_FOR_BBP(rt2x00dev, ®)) - rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®); - } - - *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u16 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg); - - reg = 0; - rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); - rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); - rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); - rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); - - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static void _rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - rt2500usb_register_read(rt2x00dev, offset, (u16 *)value); -} - -static void _rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - rt2500usb_register_write(rt2x00dev, offset, value); -} - -static const struct rt2x00debug rt2500usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = _rt2500usb_register_read, - .write = _rt2500usb_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u16), - .word_count = CSR_REG_SIZE / sizeof(u16), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2500usb_bbp_read, - .write = rt2500usb_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2500usb_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); - return rt2x00_get_field16(reg, MAC_CSR19_VAL7); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2500usb_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - u16 reg; - - rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, ®); - - if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) - rt2x00_set_field16(®, MAC_CSR20_LINK, enabled); - else if (led->type == LED_TYPE_ACTIVITY) - rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, enabled); - - rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg); -} - -static int rt2500usb_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u16 reg; - - rt2500usb_register_read(led->rt2x00dev, MAC_CSR21, ®); - rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, *delay_on); - rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, *delay_off); - rt2500usb_register_write(led->rt2x00dev, MAC_CSR21, reg); - - return 0; -} - -static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2500usb_brightness_set; - led->led_dev.blink_set = rt2500usb_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ - -/* - * rt2500usb does not differentiate between shared and pairwise - * keys, so we should use the same function for both key types. - */ -static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - u32 mask; - u16 reg; - enum cipher curr_cipher; - - if (crypto->cmd == SET_KEY) { - /* - * Disallow to set WEP key other than with index 0, - * it is known that not work at least on some hardware. - * SW crypto will be used in that case. - */ - if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) && - key->keyidx != 0) - return -EOPNOTSUPP; - - /* - * Pairwise key will always be entry 0, but this - * could collide with a shared key on the same - * position... - */ - mask = TXRX_CSR0_KEY_ID.bit_mask; - - rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); - curr_cipher = rt2x00_get_field16(reg, TXRX_CSR0_ALGORITHM); - reg &= mask; - - if (reg && reg == mask) - return -ENOSPC; - - reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID); - - key->hw_key_idx += reg ? ffz(reg) : 0; - /* - * Hardware requires that all keys use the same cipher - * (e.g. TKIP-only, AES-only, but not TKIP+AES). - * If this is not the first key, compare the cipher with the - * first one and fall back to SW crypto if not the same. - */ - if (key->hw_key_idx > 0 && crypto->cipher != curr_cipher) - return -EOPNOTSUPP; - - rt2500usb_register_multiwrite(rt2x00dev, KEY_ENTRY(key->hw_key_idx), - crypto->key, sizeof(crypto->key)); - - /* - * The driver does not support the IV/EIV generation - * in hardware. However it demands the data to be provided - * both separately as well as inside the frame. - * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib - * to ensure rt2x00lib will not strip the data from the - * frame after the copy, now we must tell mac80211 - * to generate the IV/EIV data. - */ - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - } - - /* - * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate - * a particular key is valid. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field16(®, TXRX_CSR0_ALGORITHM, crypto->cipher); - rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER); - - mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID); - if (crypto->cmd == SET_KEY) - mask |= 1 << key->hw_key_idx; - else if (crypto->cmd == DISABLE_KEY) - mask &= ~(1 << key->hw_key_idx); - rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, mask); - rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - return 0; -} - -static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u16 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, 1); - rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, - !rt2x00dev->intf_ap_count); - rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); - rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); -} - -static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int bcn_preload; - u16 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Enable beacon config - */ - bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); - rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); - rt2x00_set_field16(®, TXRX_CSR20_OFFSET, bcn_preload >> 6); - rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, - 2 * (conf->type != NL80211_IFTYPE_STATION)); - rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg); - - /* - * Enable synchronisation. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); - rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, conf->sync); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - } - - if (flags & CONFIG_UPDATE_MAC) - rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac, - (3 * sizeof(__le16))); - - if (flags & CONFIG_UPDATE_BSSID) - rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, conf->bssid, - (3 * sizeof(__le16))); -} - -static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp, - u32 changed) -{ - u16 reg; - - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); - rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, - !!erp->short_preamble); - rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); - } - - if (changed & BSS_CHANGED_BASIC_RATES) - rt2500usb_register_write(rt2x00dev, TXRX_CSR11, - erp->basic_rates); - - if (changed & BSS_CHANGED_BEACON_INT) { - rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); - rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, - erp->beacon_int * 4); - rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); - } - - if (changed & BSS_CHANGED_ERP_SLOT) { - rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time); - rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs); - } -} - -static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r2; - u8 r14; - u16 csr5; - u16 csr6; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - rt2500usb_bbp_read(rt2x00dev, 2, &r2); - rt2500usb_bbp_read(rt2x00dev, 14, &r14); - rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5); - rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6); - - /* - * Configure the TX antenna. - */ - switch (ant->tx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); - break; - } - - /* - * RT2525E and RT5222 need to flip TX I/Q - */ - if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) { - rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1); - - /* - * RT2525E does not need RX I/Q Flip. - */ - if (rt2x00_rf(rt2x00dev, RF2525E)) - rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); - } else { - rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0); - } - - rt2500usb_bbp_write(rt2x00dev, 2, r2); - rt2500usb_bbp_write(rt2x00dev, 14, r14); - rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5); - rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6); -} - -static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - /* - * Set TXpower. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - - /* - * For RT2525E we should first set the channel to half band higher. - */ - if (rt2x00_rf(rt2x00dev, RF2525E)) { - static const u32 vals[] = { - 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2, - 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba, - 0x000008ba, 0x000008be, 0x000008b7, 0x00000902, - 0x00000902, 0x00000906 - }; - - rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]); - if (rf->rf4) - rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); - } - - rt2500usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2500usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2500usb_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 rf3; - - rt2x00_rf_read(rt2x00dev, 3, &rf3); - rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2500usb_rf_write(rt2x00dev, 3, rf3); -} - -static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u16 reg; - - if (state == STATE_SLEEP) { - rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); - rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, - rt2x00dev->beacon_int - 20); - rt2x00_set_field16(®, MAC_CSR18_BEACONS_BEFORE_WAKEUP, - libconf->conf->listen_interval - 1); - - /* We must first disable autowake before it can be enabled */ - rt2x00_set_field16(®, MAC_CSR18_AUTO_WAKE, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); - - rt2x00_set_field16(®, MAC_CSR18_AUTO_WAKE, 1); - rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); - } else { - rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); - rt2x00_set_field16(®, MAC_CSR18_AUTO_WAKE, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); - } - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); -} - -static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2500usb_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & IEEE80211_CONF_CHANGE_POWER) && - !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) - rt2500usb_config_txpower(rt2x00dev, - libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2500usb_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u16 reg; - - /* - * Update FCS error count from register. - */ - rt2500usb_register_read(rt2x00dev, STA_CSR0, ®); - qual->rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2500usb_register_read(rt2x00dev, STA_CSR3, ®); - qual->false_cca = rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR); -} - -static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u16 eeprom; - u16 value; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW); - rt2500usb_bbp_write(rt2x00dev, 24, value); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW); - rt2500usb_bbp_write(rt2x00dev, 25, value); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW); - rt2500usb_bbp_write(rt2x00dev, 61, value); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER); - rt2500usb_bbp_write(rt2x00dev, 17, value); - - qual->vgc_level = value; -} - -/* - * Queue handlers. - */ -static void rt2500usb_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u16 reg; - - switch (queue->qid) { - case QID_RX: - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); - break; - case QID_BEACON: - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - break; - default: - break; - } -} - -static void rt2500usb_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u16 reg; - - switch (queue->qid) { - case QID_RX: - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); - break; - case QID_BEACON: - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0); - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - break; - default: - break; - } -} - -/* - * Initialization functions. - */ -static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001, - USB_MODE_TEST, REGISTER_TIMEOUT); - rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308, - 0x00f0, REGISTER_TIMEOUT); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); - - rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111); - rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11); - - rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 1); - rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR5, ®); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0, 13); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1, 12); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1_VALID, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR6, ®); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0, 10); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1, 11); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1_VALID, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR7, ®); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0, 7); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1, 6); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1_VALID, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR8, ®); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0, 5); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1, 0); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0); - rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 0); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0); - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - - rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f); - rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1); - rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); - - if (rt2x00_rev(rt2x00dev) >= RT2570_VERSION_C) { - rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®); - rt2x00_set_field16(®, PHY_CSR2_LNA, 0); - } else { - reg = 0; - rt2x00_set_field16(®, PHY_CSR2_LNA, 1); - rt2x00_set_field16(®, PHY_CSR2_LNA_MODE, 3); - } - rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg); - - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002); - rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053); - rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee); - rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000); - - rt2500usb_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field16(®, MAC_CSR8_MAX_FRAME_UNIT, - rt2x00dev->rx->data_size); - rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field16(®, TXRX_CSR0_ALGORITHM, CIPHER_NONE); - rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); - rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, 90); - rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); - - rt2500usb_register_read(rt2x00dev, PHY_CSR4, ®); - rt2x00_set_field16(®, PHY_CSR4_LOW_RF_LE, 1); - rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field16(®, TXRX_CSR1_AUTO_SEQUENCE, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); - - return 0; -} - -static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) { - rt2500usb_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} - -static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 value; - u8 reg_id; - - if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2500usb_bbp_write(rt2x00dev, 3, 0x02); - rt2500usb_bbp_write(rt2x00dev, 4, 0x19); - rt2500usb_bbp_write(rt2x00dev, 14, 0x1c); - rt2500usb_bbp_write(rt2x00dev, 15, 0x30); - rt2500usb_bbp_write(rt2x00dev, 16, 0xac); - rt2500usb_bbp_write(rt2x00dev, 18, 0x18); - rt2500usb_bbp_write(rt2x00dev, 19, 0xff); - rt2500usb_bbp_write(rt2x00dev, 20, 0x1e); - rt2500usb_bbp_write(rt2x00dev, 21, 0x08); - rt2500usb_bbp_write(rt2x00dev, 22, 0x08); - rt2500usb_bbp_write(rt2x00dev, 23, 0x08); - rt2500usb_bbp_write(rt2x00dev, 24, 0x80); - rt2500usb_bbp_write(rt2x00dev, 25, 0x50); - rt2500usb_bbp_write(rt2x00dev, 26, 0x08); - rt2500usb_bbp_write(rt2x00dev, 27, 0x23); - rt2500usb_bbp_write(rt2x00dev, 30, 0x10); - rt2500usb_bbp_write(rt2x00dev, 31, 0x2b); - rt2500usb_bbp_write(rt2x00dev, 32, 0xb9); - rt2500usb_bbp_write(rt2x00dev, 34, 0x12); - rt2500usb_bbp_write(rt2x00dev, 35, 0x50); - rt2500usb_bbp_write(rt2x00dev, 39, 0xc4); - rt2500usb_bbp_write(rt2x00dev, 40, 0x02); - rt2500usb_bbp_write(rt2x00dev, 41, 0x60); - rt2500usb_bbp_write(rt2x00dev, 53, 0x10); - rt2500usb_bbp_write(rt2x00dev, 54, 0x18); - rt2500usb_bbp_write(rt2x00dev, 56, 0x08); - rt2500usb_bbp_write(rt2x00dev, 57, 0x10); - rt2500usb_bbp_write(rt2x00dev, 58, 0x08); - rt2500usb_bbp_write(rt2x00dev, 61, 0x60); - rt2500usb_bbp_write(rt2x00dev, 62, 0x10); - rt2500usb_bbp_write(rt2x00dev, 75, 0xff); - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2500usb_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -/* - * Device state switch handlers. - */ -static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (unlikely(rt2500usb_init_registers(rt2x00dev) || - rt2500usb_init_bbp(rt2x00dev))) - return -EIO; - - return 0; -} - -static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121); - rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121); - - /* - * Disable synchronisation. - */ - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); - - rt2x00usb_disable_radio(rt2x00dev); -} - -static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u16 reg; - u16 reg2; - unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; - - put_to_sleep = (state != STATE_AWAKE); - - reg = 0; - rt2x00_set_field16(®, MAC_CSR17_BBP_DESIRE_STATE, state); - rt2x00_set_field16(®, MAC_CSR17_RF_DESIRE_STATE, state); - rt2x00_set_field16(®, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep); - rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); - rt2x00_set_field16(®, MAC_CSR17_SET_STATE, 1); - rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) { - rt2500usb_register_read(rt2x00dev, MAC_CSR17, ®2); - bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE); - rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE); - if (bbp_state == state && rf_state == state) - return 0; - rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); - msleep(30); - } - - return -EBUSY; -} - -static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2500usb_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt2500usb_disable_radio(rt2x00dev); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - /* No support, but no error either */ - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2500usb_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt2500usb_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - __le32 *txd = (__le32 *) entry->skb->data; - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - (txdesc->rate_mode == RATE_MODE_OFDM)); - rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, - test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); - rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher); - rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx); - rt2x00_desc_write(txd, 0, word); - - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); - rt2x00_set_field32(&word, TXD_W1_AIFS, entry->queue->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->u.plcp.signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->u.plcp.service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, - txdesc->u.plcp.length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, - txdesc->u.plcp.length_high); - rt2x00_desc_write(txd, 2, word); - - if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { - _rt2x00_desc_write(txd, 3, skbdesc->iv[0]); - _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); - } - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->flags |= SKBDESC_DESC_IN_SKB; - skbdesc->desc = txd; - skbdesc->desc_len = TXD_DESC_SIZE; -} - -/* - * TX data initialization - */ -static void rt2500usb_beacondone(struct urb *urb); - -static void rt2500usb_write_beacon(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); - struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; - int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint); - int length; - u16 reg, reg0; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - - /* - * Add space for the descriptor in front of the skb. - */ - skb_push(entry->skb, TXD_DESC_SIZE); - memset(entry->skb->data, 0, TXD_DESC_SIZE); - - /* - * Write the TX descriptor for the beacon. - */ - rt2500usb_write_tx_desc(entry, txdesc); - - /* - * Dump beacon to userspace through debugfs. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - - /* - * USB devices cannot blindly pass the skb->len as the - * length of the data to usb_fill_bulk_urb. Pass the skb - * to the driver to determine what the length should be. - */ - length = rt2x00dev->ops->lib->get_tx_data_len(entry); - - usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe, - entry->skb->data, length, rt2500usb_beacondone, - entry); - - /* - * Second we need to create the guardian byte. - * We only need a single byte, so lets recycle - * the 'flags' field we are not using for beacons. - */ - bcn_priv->guardian_data = 0; - usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe, - &bcn_priv->guardian_data, 1, rt2500usb_beacondone, - entry); - - /* - * Send out the guardian byte. - */ - usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC); - - /* - * Enable beaconing again. - */ - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); - reg0 = reg; - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); - /* - * Beacon generation will fail initially. - * To prevent this we need to change the TXRX_CSR19 - * register several times (reg0 is the same as reg - * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0 - * and 1 in reg). - */ - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); -} - -static int rt2500usb_get_tx_data_len(struct queue_entry *entry) -{ - int length; - - /* - * The length _must_ be a multiple of 2, - * but it must _not_ be a multiple of the USB packet size. - */ - length = roundup(entry->skb->len, 2); - length += (2 * !(length % entry->queue->usb_maxpacket)); - - return length; -} - -/* - * RX control handlers - */ -static void rt2500usb_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct queue_entry_priv_usb *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - __le32 *rxd = - (__le32 *)(entry->skb->data + - (entry_priv->urb->actual_length - - entry->queue->desc_size)); - u32 word0; - u32 word1; - - /* - * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of - * frame data in rt2x00usb. - */ - memcpy(skbdesc->desc, rxd, skbdesc->desc_len); - rxd = (__le32 *)skbdesc->desc; - - /* - * It is now safe to read the descriptor on all architectures. - */ - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 1, &word1); - - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER); - if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) - rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY; - - if (rxdesc->cipher != CIPHER_NONE) { - _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]); - _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]); - rxdesc->dev_flags |= RXDONE_CRYPTO_IV; - - /* ICV is located at the end of frame */ - - rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; - if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) - rxdesc->flags |= RX_FLAG_DECRYPTED; - else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) - rxdesc->flags |= RX_FLAG_MMIC_ERROR; - } - - /* - * Obtain the status about this packet. - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 100kbit/s. - */ - rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = - rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset; - rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - if (rt2x00_get_field32(word0, RXD_W0_OFDM)) - rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; - else - rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; - if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; - - /* - * Adjust the skb memory window to the frame boundaries. - */ - skb_trim(entry->skb, rxdesc->size); -} - -/* - * Interrupt functions. - */ -static void rt2500usb_beacondone(struct urb *urb) -{ - struct queue_entry *entry = (struct queue_entry *)urb->context; - struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) - return; - - /* - * Check if this was the guardian beacon, - * if that was the case we need to send the real beacon now. - * Otherwise we should free the sk_buffer, the device - * should be doing the rest of the work now. - */ - if (bcn_priv->guardian_urb == urb) { - usb_submit_urb(bcn_priv->urb, GFP_ATOMIC); - } else if (bcn_priv->urb == urb) { - dev_kfree_skb(entry->skb); - entry->skb = NULL; - } -} - -/* - * Device probe functions. - */ -static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - u8 *mac; - u8 bbp; - - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - eth_random_addr(mac); - rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, - ANTENNA_SW_DIVERSITY); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, - ANTENNA_SW_DIVERSITY); - rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, - LED_MODE_DEFAULT); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, - DEFAULT_RSSI_OFFSET); - rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); - rt2x00_eeprom_dbg(rt2x00dev, "Calibrate offset: 0x%04x\n", - word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word); - rt2x00_eeprom_dbg(rt2x00dev, "BBPtune: 0x%04x\n", word); - } - - /* - * Switch lower vgc bound to current BBP R17 value, - * lower the value a bit for better quality. - */ - rt2500usb_bbp_read(rt2x00dev, 17, &bbp); - bbp -= 6; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); - rt2x00_eeprom_dbg(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); - } else { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); - rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r17: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word); - rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r24: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word); - rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r25: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word); - rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r61: 0x%04x\n", word); - } - - return 0; -} - -static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2570, value, reg); - - if (((reg & 0xfff0) != 0) || ((reg & 0x0000000f) == 0)) { - rt2x00_err(rt2x00dev, "Invalid RT chipset detected\n"); - return -ENODEV; - } - - if (!rt2x00_rf(rt2x00dev, RF2522) && - !rt2x00_rf(rt2x00dev, RF2523) && - !rt2x00_rf(rt2x00dev, RF2524) && - !rt2x00_rf(rt2x00dev, RF2525) && - !rt2x00_rf(rt2x00dev, RF2525E) && - !rt2x00_rf(rt2x00dev, RF5222)) { - rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead. - * I am not 100% sure about this, but the legacy drivers do not - * indicate antenna swapping in software is required when - * diversity is enabled. - */ - if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) - rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; - if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) - rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; - - /* - * Store led mode, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - if (value == LED_MODE_TXRX_ACTIVITY || - value == LED_MODE_DEFAULT || - value == LED_MODE_ASUS) - rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_ACTIVITY); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); - - /* - * Read the RSSI <-> dBm offset information. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); - rt2x00dev->rssi_offset = - rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); - - return 0; -} - -/* - * RF value list for RF2522 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2522[] = { - { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, - { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, - { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, - { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, - { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, - { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, - { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, - { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, - { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, - { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, - { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, - { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, - { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, - { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, -}; - -/* - * RF value list for RF2523 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2523[] = { - { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, - { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, - { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, - { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, - { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, - { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, - { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, - { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, - { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, - { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, - { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, - { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, - { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, - { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, -}; - -/* - * RF value list for RF2524 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2524[] = { - { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, - { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, - { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, - { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, - { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, - { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, - { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, - { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, - { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, - { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, - { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, - { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, - { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, - { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, -}; - -/* - * RF value list for RF2525 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525[] = { - { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, - { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, - { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, - { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, - { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, - { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, - { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, - { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, - { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, - { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, - { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, - { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, - { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, - { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, -}; - -/* - * RF value list for RF2525e - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525e[] = { - { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b }, - { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 }, - { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b }, - { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 }, - { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b }, - { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 }, - { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b }, - { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 }, - { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b }, - { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 }, - { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b }, - { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 }, - { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b }, - { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 }, -}; - -/* - * RF value list for RF5222 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5222[] = { - { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, - { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, - { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, - { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, - { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, - { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, - { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, - { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, - { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, - { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, - { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, - { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, - { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, - { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, - { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, - { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, - { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, - { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, - { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, - { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, - { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, - { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, - { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, - { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, - { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, - { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, - { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, - { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, - { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, - { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, - - /* 802.11 UNII */ - { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, - { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, - { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, - { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, - { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, -}; - -static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power; - unsigned int i; - - /* - * Initialize all hw fields. - * - * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING unless we are - * capable of sending the buffered frames out after the DTIM - * transmission using rt2x00lib_beacondone. This will send out - * multicast and broadcast traffic immediately instead of buffering it - * infinitly and thus dropping it after some time. - */ - ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); - ieee80211_hw_set(rt2x00dev->hw, RX_INCLUDES_FCS); - ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); - - /* - * Disable powersaving as default. - */ - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(rt2x00dev, RF2522)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); - spec->channels = rf_vals_bg_2522; - } else if (rt2x00_rf(rt2x00dev, RF2523)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); - spec->channels = rf_vals_bg_2523; - } else if (rt2x00_rf(rt2x00dev, RF2524)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); - spec->channels = rf_vals_bg_2524; - } else if (rt2x00_rf(rt2x00dev, RF2525)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); - spec->channels = rf_vals_bg_2525; - } else if (rt2x00_rf(rt2x00dev, RF2525E)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); - spec->channels = rf_vals_bg_2525e; - } else if (rt2x00_rf(rt2x00dev, RF5222)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_5222); - spec->channels = rf_vals_5222; - } - - /* - * Create channel information array - */ - info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); - } - - if (spec->num_channels > 14) { - for (i = 14; i < spec->num_channels; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = DEFAULT_TXPOWER; - } - } - - return 0; -} - -static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u16 reg; - - /* - * Allocate eeprom data. - */ - retval = rt2500usb_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2500usb_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); - rt2x00_set_field16(®, MAC_CSR19_DIR0, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg); - - /* - * Initialize hw specifications. - */ - retval = rt2500usb_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device requires the atim queue - */ - __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags); - if (!modparam_nohwcrypt) { - __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_COPY_IV, &rt2x00dev->cap_flags); - } - __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -static const struct ieee80211_ops rt2500usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_tim = rt2x00mac_set_tim, - .set_key = rt2x00mac_set_key, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, - .rfkill_poll = rt2x00mac_rfkill_poll, - .flush = rt2x00mac_flush, - .set_antenna = rt2x00mac_set_antenna, - .get_antenna = rt2x00mac_get_antenna, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { - .probe_hw = rt2500usb_probe_hw, - .initialize = rt2x00usb_initialize, - .uninitialize = rt2x00usb_uninitialize, - .clear_entry = rt2x00usb_clear_entry, - .set_device_state = rt2500usb_set_device_state, - .rfkill_poll = rt2500usb_rfkill_poll, - .link_stats = rt2500usb_link_stats, - .reset_tuner = rt2500usb_reset_tuner, - .watchdog = rt2x00usb_watchdog, - .start_queue = rt2500usb_start_queue, - .kick_queue = rt2x00usb_kick_queue, - .stop_queue = rt2500usb_stop_queue, - .flush_queue = rt2x00usb_flush_queue, - .write_tx_desc = rt2500usb_write_tx_desc, - .write_beacon = rt2500usb_write_beacon, - .get_tx_data_len = rt2500usb_get_tx_data_len, - .fill_rxdone = rt2500usb_fill_rxdone, - .config_shared_key = rt2500usb_config_key, - .config_pairwise_key = rt2500usb_config_key, - .config_filter = rt2500usb_config_filter, - .config_intf = rt2500usb_config_intf, - .config_erp = rt2500usb_config_erp, - .config_ant = rt2500usb_config_ant, - .config = rt2500usb_config, -}; - -static void rt2500usb_queue_init(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_RX: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = RXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_BEACON: - queue->limit = 1; - queue->data_size = MGMT_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_usb_bcn); - break; - - case QID_ATIM: - queue->limit = 8; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - default: - BUG(); - break; - } -} - -static const struct rt2x00_ops rt2500usb_ops = { - .name = KBUILD_MODNAME, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt2500usb_queue_init, - .lib = &rt2500usb_rt2x00_ops, - .hw = &rt2500usb_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500usb_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * rt2500usb module information. - */ -static struct usb_device_id rt2500usb_device_table[] = { - /* ASUS */ - { USB_DEVICE(0x0b05, 0x1706) }, - { USB_DEVICE(0x0b05, 0x1707) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x7050) }, /* FCC ID: K7SF5D7050A ver. 2.x */ - { USB_DEVICE(0x050d, 0x7051) }, - /* Cisco Systems */ - { USB_DEVICE(0x13b1, 0x000d) }, - { USB_DEVICE(0x13b1, 0x0011) }, - { USB_DEVICE(0x13b1, 0x001a) }, - /* Conceptronic */ - { USB_DEVICE(0x14b2, 0x3c02) }, - /* D-LINK */ - { USB_DEVICE(0x2001, 0x3c00) }, - /* Gigabyte */ - { USB_DEVICE(0x1044, 0x8001) }, - { USB_DEVICE(0x1044, 0x8007) }, - /* Hercules */ - { USB_DEVICE(0x06f8, 0xe000) }, - /* Melco */ - { USB_DEVICE(0x0411, 0x005e) }, - { USB_DEVICE(0x0411, 0x0066) }, - { USB_DEVICE(0x0411, 0x0067) }, - { USB_DEVICE(0x0411, 0x008b) }, - { USB_DEVICE(0x0411, 0x0097) }, - /* MSI */ - { USB_DEVICE(0x0db0, 0x6861) }, - { USB_DEVICE(0x0db0, 0x6865) }, - { USB_DEVICE(0x0db0, 0x6869) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x1706) }, - { USB_DEVICE(0x148f, 0x2570) }, - { USB_DEVICE(0x148f, 0x9020) }, - /* Sagem */ - { USB_DEVICE(0x079b, 0x004b) }, - /* Siemens */ - { USB_DEVICE(0x0681, 0x3c06) }, - /* SMC */ - { USB_DEVICE(0x0707, 0xee13) }, - /* Spairon */ - { USB_DEVICE(0x114b, 0x0110) }, - /* SURECOM */ - { USB_DEVICE(0x0769, 0x11f3) }, - /* Trust */ - { USB_DEVICE(0x0eb0, 0x9020) }, - /* VTech */ - { USB_DEVICE(0x0f88, 0x3012) }, - /* Zinwell */ - { USB_DEVICE(0x5a57, 0x0260) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards"); -MODULE_DEVICE_TABLE(usb, rt2500usb_device_table); -MODULE_LICENSE("GPL"); - -static int rt2500usb_probe(struct usb_interface *usb_intf, - const struct usb_device_id *id) -{ - return rt2x00usb_probe(usb_intf, &rt2500usb_ops); -} - -static struct usb_driver rt2500usb_driver = { - .name = KBUILD_MODNAME, - .id_table = rt2500usb_device_table, - .probe = rt2500usb_probe, - .disconnect = rt2x00usb_disconnect, - .suspend = rt2x00usb_suspend, - .resume = rt2x00usb_resume, - .reset_resume = rt2x00usb_resume, - .disable_hub_initiated_lpm = 1, -}; - -module_usb_driver(rt2500usb_driver); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h deleted file mode 100644 index 78cc035b2d17..000000000000 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ /dev/null @@ -1,855 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2500usb - Abstract: Data structures and registers for the rt2500usb module. - Supported chipsets: RT2570. - */ - -#ifndef RT2500USB_H -#define RT2500USB_H - -/* - * RF chip defines. - */ -#define RF2522 0x0000 -#define RF2523 0x0001 -#define RF2524 0x0002 -#define RF2525 0x0003 -#define RF2525E 0x0005 -#define RF5222 0x0010 - -/* - * RT2570 version - */ -#define RT2570_VERSION_B 2 -#define RT2570_VERSION_C 3 -#define RT2570_VERSION_D 4 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x0400 -#define CSR_REG_SIZE 0x0100 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x006e -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0060 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 2 - -/* - * Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - */ -#define MAC_CSR0 0x0400 - -/* - * MAC_CSR1: System control. - * SOFT_RESET: Software reset, 1: reset, 0: normal. - * BBP_RESET: Hardware reset, 1: reset, 0, release. - * HOST_READY: Host ready after initialization. - */ -#define MAC_CSR1 0x0402 -#define MAC_CSR1_SOFT_RESET FIELD16(0x00000001) -#define MAC_CSR1_BBP_RESET FIELD16(0x00000002) -#define MAC_CSR1_HOST_READY FIELD16(0x00000004) - -/* - * MAC_CSR2: STA MAC register 0. - */ -#define MAC_CSR2 0x0404 -#define MAC_CSR2_BYTE0 FIELD16(0x00ff) -#define MAC_CSR2_BYTE1 FIELD16(0xff00) - -/* - * MAC_CSR3: STA MAC register 1. - */ -#define MAC_CSR3 0x0406 -#define MAC_CSR3_BYTE2 FIELD16(0x00ff) -#define MAC_CSR3_BYTE3 FIELD16(0xff00) - -/* - * MAC_CSR4: STA MAC register 2. - */ -#define MAC_CSR4 0X0408 -#define MAC_CSR4_BYTE4 FIELD16(0x00ff) -#define MAC_CSR4_BYTE5 FIELD16(0xff00) - -/* - * MAC_CSR5: BSSID register 0. - */ -#define MAC_CSR5 0x040a -#define MAC_CSR5_BYTE0 FIELD16(0x00ff) -#define MAC_CSR5_BYTE1 FIELD16(0xff00) - -/* - * MAC_CSR6: BSSID register 1. - */ -#define MAC_CSR6 0x040c -#define MAC_CSR6_BYTE2 FIELD16(0x00ff) -#define MAC_CSR6_BYTE3 FIELD16(0xff00) - -/* - * MAC_CSR7: BSSID register 2. - */ -#define MAC_CSR7 0x040e -#define MAC_CSR7_BYTE4 FIELD16(0x00ff) -#define MAC_CSR7_BYTE5 FIELD16(0xff00) - -/* - * MAC_CSR8: Max frame length. - */ -#define MAC_CSR8 0x0410 -#define MAC_CSR8_MAX_FRAME_UNIT FIELD16(0x0fff) - -/* - * Misc MAC_CSR registers. - * MAC_CSR9: Timer control. - * MAC_CSR10: Slot time. - * MAC_CSR11: SIFS. - * MAC_CSR12: EIFS. - * MAC_CSR13: Power mode0. - * MAC_CSR14: Power mode1. - * MAC_CSR15: Power saving transition0 - * MAC_CSR16: Power saving transition1 - */ -#define MAC_CSR9 0x0412 -#define MAC_CSR10 0x0414 -#define MAC_CSR11 0x0416 -#define MAC_CSR12 0x0418 -#define MAC_CSR13 0x041a -#define MAC_CSR14 0x041c -#define MAC_CSR15 0x041e -#define MAC_CSR16 0x0420 - -/* - * MAC_CSR17: Manual power control / status register. - * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. - * SET_STATE: Set state. Write 1 to trigger, self cleared. - * BBP_DESIRE_STATE: BBP desired state. - * RF_DESIRE_STATE: RF desired state. - * BBP_CURRENT_STATE: BBP current state. - * RF_CURRENT_STATE: RF current state. - * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. - */ -#define MAC_CSR17 0x0422 -#define MAC_CSR17_SET_STATE FIELD16(0x0001) -#define MAC_CSR17_BBP_DESIRE_STATE FIELD16(0x0006) -#define MAC_CSR17_RF_DESIRE_STATE FIELD16(0x0018) -#define MAC_CSR17_BBP_CURR_STATE FIELD16(0x0060) -#define MAC_CSR17_RF_CURR_STATE FIELD16(0x0180) -#define MAC_CSR17_PUT_TO_SLEEP FIELD16(0x0200) - -/* - * MAC_CSR18: Wakeup timer register. - * DELAY_AFTER_BEACON: Delay after Tbcn expired in units of 1/16 TU. - * BEACONS_BEFORE_WAKEUP: Number of beacon before wakeup. - * AUTO_WAKE: Enable auto wakeup / sleep mechanism. - */ -#define MAC_CSR18 0x0424 -#define MAC_CSR18_DELAY_AFTER_BEACON FIELD16(0x00ff) -#define MAC_CSR18_BEACONS_BEFORE_WAKEUP FIELD16(0x7f00) -#define MAC_CSR18_AUTO_WAKE FIELD16(0x8000) - -/* - * MAC_CSR19: GPIO control register. - * MAC_CSR19_VALx: GPIO value - * MAC_CSR19_DIRx: GPIO direction: 0 = input; 1 = output - */ -#define MAC_CSR19 0x0426 -#define MAC_CSR19_VAL0 FIELD16(0x0001) -#define MAC_CSR19_VAL1 FIELD16(0x0002) -#define MAC_CSR19_VAL2 FIELD16(0x0004) -#define MAC_CSR19_VAL3 FIELD16(0x0008) -#define MAC_CSR19_VAL4 FIELD16(0x0010) -#define MAC_CSR19_VAL5 FIELD16(0x0020) -#define MAC_CSR19_VAL6 FIELD16(0x0040) -#define MAC_CSR19_VAL7 FIELD16(0x0080) -#define MAC_CSR19_DIR0 FIELD16(0x0100) -#define MAC_CSR19_DIR1 FIELD16(0x0200) -#define MAC_CSR19_DIR2 FIELD16(0x0400) -#define MAC_CSR19_DIR3 FIELD16(0x0800) -#define MAC_CSR19_DIR4 FIELD16(0x1000) -#define MAC_CSR19_DIR5 FIELD16(0x2000) -#define MAC_CSR19_DIR6 FIELD16(0x4000) -#define MAC_CSR19_DIR7 FIELD16(0x8000) - -/* - * MAC_CSR20: LED control register. - * ACTIVITY: 0: idle, 1: active. - * LINK: 0: linkoff, 1: linkup. - * ACTIVITY_POLARITY: 0: active low, 1: active high. - */ -#define MAC_CSR20 0x0428 -#define MAC_CSR20_ACTIVITY FIELD16(0x0001) -#define MAC_CSR20_LINK FIELD16(0x0002) -#define MAC_CSR20_ACTIVITY_POLARITY FIELD16(0x0004) - -/* - * MAC_CSR21: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - */ -#define MAC_CSR21 0x042a -#define MAC_CSR21_ON_PERIOD FIELD16(0x00ff) -#define MAC_CSR21_OFF_PERIOD FIELD16(0xff00) - -/* - * MAC_CSR22: Collision window control register. - */ -#define MAC_CSR22 0x042c - -/* - * Transmit related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXRX_CSR0: Security control register. - */ -#define TXRX_CSR0 0x0440 -#define TXRX_CSR0_ALGORITHM FIELD16(0x0007) -#define TXRX_CSR0_IV_OFFSET FIELD16(0x01f8) -#define TXRX_CSR0_KEY_ID FIELD16(0x1e00) - -/* - * TXRX_CSR1: TX configuration. - * ACK_TIMEOUT: ACK Timeout in unit of 1-us. - * TSF_OFFSET: TSF offset in MAC header. - * AUTO_SEQUENCE: Let ASIC control frame sequence number. - */ -#define TXRX_CSR1 0x0442 -#define TXRX_CSR1_ACK_TIMEOUT FIELD16(0x00ff) -#define TXRX_CSR1_TSF_OFFSET FIELD16(0x7f00) -#define TXRX_CSR1_AUTO_SEQUENCE FIELD16(0x8000) - -/* - * TXRX_CSR2: RX control. - * DISABLE_RX: Disable rx engine. - * DROP_CRC: Drop crc error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TODS: Drop frame tods bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * DROP_MCAST: Drop multicast frames. - * DROP_BCAST: Drop broadcast frames. - */ -#define TXRX_CSR2 0x0444 -#define TXRX_CSR2_DISABLE_RX FIELD16(0x0001) -#define TXRX_CSR2_DROP_CRC FIELD16(0x0002) -#define TXRX_CSR2_DROP_PHYSICAL FIELD16(0x0004) -#define TXRX_CSR2_DROP_CONTROL FIELD16(0x0008) -#define TXRX_CSR2_DROP_NOT_TO_ME FIELD16(0x0010) -#define TXRX_CSR2_DROP_TODS FIELD16(0x0020) -#define TXRX_CSR2_DROP_VERSION_ERROR FIELD16(0x0040) -#define TXRX_CSR2_DROP_MULTICAST FIELD16(0x0200) -#define TXRX_CSR2_DROP_BROADCAST FIELD16(0x0400) - -/* - * RX BBP ID registers - * TXRX_CSR3: CCK RX BBP ID. - * TXRX_CSR4: OFDM RX BBP ID. - */ -#define TXRX_CSR3 0x0446 -#define TXRX_CSR4 0x0448 - -/* - * TXRX_CSR5: CCK TX BBP ID0. - */ -#define TXRX_CSR5 0x044a -#define TXRX_CSR5_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR5_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR5_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR5_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR6: CCK TX BBP ID1. - */ -#define TXRX_CSR6 0x044c -#define TXRX_CSR6_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR6_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR6_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR6_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR7: OFDM TX BBP ID0. - */ -#define TXRX_CSR7 0x044e -#define TXRX_CSR7_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR7_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR7_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR7_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR8: OFDM TX BBP ID1. - */ -#define TXRX_CSR8 0x0450 -#define TXRX_CSR8_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR8_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR8_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR8_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR9: TX ACK time-out. - */ -#define TXRX_CSR9 0x0452 - -/* - * TXRX_CSR10: Auto responder control. - */ -#define TXRX_CSR10 0x0454 -#define TXRX_CSR10_AUTORESPOND_PREAMBLE FIELD16(0x0004) - -/* - * TXRX_CSR11: Auto responder basic rate. - */ -#define TXRX_CSR11 0x0456 - -/* - * ACK/CTS time registers. - */ -#define TXRX_CSR12 0x0458 -#define TXRX_CSR13 0x045a -#define TXRX_CSR14 0x045c -#define TXRX_CSR15 0x045e -#define TXRX_CSR16 0x0460 -#define TXRX_CSR17 0x0462 - -/* - * TXRX_CSR18: Synchronization control register. - */ -#define TXRX_CSR18 0x0464 -#define TXRX_CSR18_OFFSET FIELD16(0x000f) -#define TXRX_CSR18_INTERVAL FIELD16(0xfff0) - -/* - * TXRX_CSR19: Synchronization control register. - * TSF_COUNT: Enable TSF auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * TBCN: Enable Tbcn with reload value. - * BEACON_GEN: Enable beacon generator. - */ -#define TXRX_CSR19 0x0466 -#define TXRX_CSR19_TSF_COUNT FIELD16(0x0001) -#define TXRX_CSR19_TSF_SYNC FIELD16(0x0006) -#define TXRX_CSR19_TBCN FIELD16(0x0008) -#define TXRX_CSR19_BEACON_GEN FIELD16(0x0010) - -/* - * TXRX_CSR20: Tx BEACON offset time control register. - * OFFSET: In units of usec. - * BCN_EXPECT_WINDOW: Default: 2^CWmin - */ -#define TXRX_CSR20 0x0468 -#define TXRX_CSR20_OFFSET FIELD16(0x1fff) -#define TXRX_CSR20_BCN_EXPECT_WINDOW FIELD16(0xe000) - -/* - * TXRX_CSR21 - */ -#define TXRX_CSR21 0x046a - -/* - * Encryption related CSRs. - * - */ - -/* - * SEC_CSR0: Shared key 0, word 0 - * SEC_CSR1: Shared key 0, word 1 - * SEC_CSR2: Shared key 0, word 2 - * SEC_CSR3: Shared key 0, word 3 - * SEC_CSR4: Shared key 0, word 4 - * SEC_CSR5: Shared key 0, word 5 - * SEC_CSR6: Shared key 0, word 6 - * SEC_CSR7: Shared key 0, word 7 - */ -#define SEC_CSR0 0x0480 -#define SEC_CSR1 0x0482 -#define SEC_CSR2 0x0484 -#define SEC_CSR3 0x0486 -#define SEC_CSR4 0x0488 -#define SEC_CSR5 0x048a -#define SEC_CSR6 0x048c -#define SEC_CSR7 0x048e - -/* - * SEC_CSR8: Shared key 1, word 0 - * SEC_CSR9: Shared key 1, word 1 - * SEC_CSR10: Shared key 1, word 2 - * SEC_CSR11: Shared key 1, word 3 - * SEC_CSR12: Shared key 1, word 4 - * SEC_CSR13: Shared key 1, word 5 - * SEC_CSR14: Shared key 1, word 6 - * SEC_CSR15: Shared key 1, word 7 - */ -#define SEC_CSR8 0x0490 -#define SEC_CSR9 0x0492 -#define SEC_CSR10 0x0494 -#define SEC_CSR11 0x0496 -#define SEC_CSR12 0x0498 -#define SEC_CSR13 0x049a -#define SEC_CSR14 0x049c -#define SEC_CSR15 0x049e - -/* - * SEC_CSR16: Shared key 2, word 0 - * SEC_CSR17: Shared key 2, word 1 - * SEC_CSR18: Shared key 2, word 2 - * SEC_CSR19: Shared key 2, word 3 - * SEC_CSR20: Shared key 2, word 4 - * SEC_CSR21: Shared key 2, word 5 - * SEC_CSR22: Shared key 2, word 6 - * SEC_CSR23: Shared key 2, word 7 - */ -#define SEC_CSR16 0x04a0 -#define SEC_CSR17 0x04a2 -#define SEC_CSR18 0X04A4 -#define SEC_CSR19 0x04a6 -#define SEC_CSR20 0x04a8 -#define SEC_CSR21 0x04aa -#define SEC_CSR22 0x04ac -#define SEC_CSR23 0x04ae - -/* - * SEC_CSR24: Shared key 3, word 0 - * SEC_CSR25: Shared key 3, word 1 - * SEC_CSR26: Shared key 3, word 2 - * SEC_CSR27: Shared key 3, word 3 - * SEC_CSR28: Shared key 3, word 4 - * SEC_CSR29: Shared key 3, word 5 - * SEC_CSR30: Shared key 3, word 6 - * SEC_CSR31: Shared key 3, word 7 - */ -#define SEC_CSR24 0x04b0 -#define SEC_CSR25 0x04b2 -#define SEC_CSR26 0x04b4 -#define SEC_CSR27 0x04b6 -#define SEC_CSR28 0x04b8 -#define SEC_CSR29 0x04ba -#define SEC_CSR30 0x04bc -#define SEC_CSR31 0x04be - -#define KEY_ENTRY(__idx) \ - ( SEC_CSR0 + ((__idx) * 16) ) - -/* - * PHY control registers. - */ - -/* - * PHY_CSR0: RF switching timing control. - */ -#define PHY_CSR0 0x04c0 - -/* - * PHY_CSR1: TX PA configuration. - */ -#define PHY_CSR1 0x04c2 - -/* - * MAC configuration registers. - */ - -/* - * PHY_CSR2: TX MAC configuration. - * NOTE: Both register fields are complete dummy, - * documentation and legacy drivers are unclear un - * what this register means or what fields exists. - */ -#define PHY_CSR2 0x04c4 -#define PHY_CSR2_LNA FIELD16(0x0002) -#define PHY_CSR2_LNA_MODE FIELD16(0x3000) - -/* - * PHY_CSR3: RX MAC configuration. - */ -#define PHY_CSR3 0x04c6 - -/* - * PHY_CSR4: Interface configuration. - */ -#define PHY_CSR4 0x04c8 -#define PHY_CSR4_LOW_RF_LE FIELD16(0x0001) - -/* - * BBP pre-TX registers. - * PHY_CSR5: BBP pre-TX CCK. - */ -#define PHY_CSR5 0x04ca -#define PHY_CSR5_CCK FIELD16(0x0003) -#define PHY_CSR5_CCK_FLIP FIELD16(0x0004) - -/* - * BBP pre-TX registers. - * PHY_CSR6: BBP pre-TX OFDM. - */ -#define PHY_CSR6 0x04cc -#define PHY_CSR6_OFDM FIELD16(0x0003) -#define PHY_CSR6_OFDM_FLIP FIELD16(0x0004) - -/* - * PHY_CSR7: BBP access register 0. - * BBP_DATA: BBP data. - * BBP_REG_ID: BBP register ID. - * BBP_READ_CONTROL: 0: write, 1: read. - */ -#define PHY_CSR7 0x04ce -#define PHY_CSR7_DATA FIELD16(0x00ff) -#define PHY_CSR7_REG_ID FIELD16(0x7f00) -#define PHY_CSR7_READ_CONTROL FIELD16(0x8000) - -/* - * PHY_CSR8: BBP access register 1. - * BBP_BUSY: ASIC is busy execute BBP programming. - */ -#define PHY_CSR8 0x04d0 -#define PHY_CSR8_BUSY FIELD16(0x0001) - -/* - * PHY_CSR9: RF access register. - * RF_VALUE: Register value + id to program into rf/if. - */ -#define PHY_CSR9 0x04d2 -#define PHY_CSR9_RF_VALUE FIELD16(0xffff) - -/* - * PHY_CSR10: RF access register. - * RF_VALUE: Register value + id to program into rf/if. - * RF_NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). - * RF_IF_SELECT: Chip to program: 0: rf, 1: if. - * RF_PLL_LD: Rf pll_ld status. - * RF_BUSY: 1: asic is busy execute rf programming. - */ -#define PHY_CSR10 0x04d4 -#define PHY_CSR10_RF_VALUE FIELD16(0x00ff) -#define PHY_CSR10_RF_NUMBER_OF_BITS FIELD16(0x1f00) -#define PHY_CSR10_RF_IF_SELECT FIELD16(0x2000) -#define PHY_CSR10_RF_PLL_LD FIELD16(0x4000) -#define PHY_CSR10_RF_BUSY FIELD16(0x8000) - -/* - * STA_CSR0: FCS error count. - * FCS_ERROR: FCS error count, cleared when read. - */ -#define STA_CSR0 0x04e0 -#define STA_CSR0_FCS_ERROR FIELD16(0xffff) - -/* - * STA_CSR1: PLCP error count. - */ -#define STA_CSR1 0x04e2 - -/* - * STA_CSR2: LONG error count. - */ -#define STA_CSR2 0x04e4 - -/* - * STA_CSR3: CCA false alarm. - * FALSE_CCA_ERROR: False CCA error count, cleared when read. - */ -#define STA_CSR3 0x04e6 -#define STA_CSR3_FALSE_CCA_ERROR FIELD16(0xffff) - -/* - * STA_CSR4: RX FIFO overflow. - */ -#define STA_CSR4 0x04e8 - -/* - * STA_CSR5: Beacon sent counter. - */ -#define STA_CSR5 0x04ea - -/* - * Statistics registers - */ -#define STA_CSR6 0x04ec -#define STA_CSR7 0x04ee -#define STA_CSR8 0x04f0 -#define STA_CSR9 0x04f2 -#define STA_CSR10 0x04f4 - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2: TX antenna control - */ -#define BBP_R2_TX_ANTENNA FIELD8(0x03) -#define BBP_R2_TX_IQ_FLIP FIELD8(0x04) - -/* - * R14: RX antenna control - */ -#define BBP_R14_RX_ANTENNA FIELD8(0x03) -#define BBP_R14_RX_IQ_FLIP FIELD8(0x04) - -/* - * RF registers. - */ - -/* - * RF 1 - */ -#define RF1_TUNER FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TUNER FIELD32(0x00000100) -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * EEPROM contents. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * LED_MODE: 0: default, 1: TX/RX activity, 2: Single (ignore link), 3: rsvd. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x000b -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * CARDBUS_ACCEL: 0: enable, 1: disable. - * DYN_BBP_TUNE: 0: enable, 1: disable. - * CCK_TX_POWER: CCK TX power compensation. - */ -#define EEPROM_NIC 0x000c -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) -#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) -#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) - -/* - * EEPROM geography. - * GEO: Default geography setting for device. - */ -#define EEPROM_GEOGRAPHY 0x000d -#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x000e -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER - */ -#define EEPROM_TXPOWER_START 0x001e -#define EEPROM_TXPOWER_SIZE 7 -#define EEPROM_TXPOWER_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_2 FIELD16(0xff00) - -/* - * EEPROM Tuning threshold - */ -#define EEPROM_BBPTUNE 0x0030 -#define EEPROM_BBPTUNE_THRESHOLD FIELD16(0x00ff) - -/* - * EEPROM BBP R24 Tuning. - */ -#define EEPROM_BBPTUNE_R24 0x0031 -#define EEPROM_BBPTUNE_R24_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R24_HIGH FIELD16(0xff00) - -/* - * EEPROM BBP R25 Tuning. - */ -#define EEPROM_BBPTUNE_R25 0x0032 -#define EEPROM_BBPTUNE_R25_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R25_HIGH FIELD16(0xff00) - -/* - * EEPROM BBP R24 Tuning. - */ -#define EEPROM_BBPTUNE_R61 0x0033 -#define EEPROM_BBPTUNE_R61_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R61_HIGH FIELD16(0xff00) - -/* - * EEPROM BBP VGC Tuning. - */ -#define EEPROM_BBPTUNE_VGC 0x0034 -#define EEPROM_BBPTUNE_VGCUPPER FIELD16(0x00ff) -#define EEPROM_BBPTUNE_VGCLOWER FIELD16(0xff00) - -/* - * EEPROM BBP R17 Tuning. - */ -#define EEPROM_BBPTUNE_R17 0x0035 -#define EEPROM_BBPTUNE_R17_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R17_HIGH FIELD16(0xff00) - -/* - * RSSI <-> dBm offset calibration - */ -#define EEPROM_CALIBRATE_OFFSET 0x0036 -#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 5 * sizeof(__le32) ) -#define RXD_DESC_SIZE ( 4 * sizeof(__le32) ) - -/* - * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_PACKET_ID FIELD32(0x0000000f) -#define TXD_W0_RETRY_LIMIT FIELD32(0x000000f0) -#define TXD_W0_MORE_FRAG FIELD32(0x00000100) -#define TXD_W0_ACK FIELD32(0x00000200) -#define TXD_W0_TIMESTAMP FIELD32(0x00000400) -#define TXD_W0_OFDM FIELD32(0x00000800) -#define TXD_W0_NEW_SEQ FIELD32(0x00001000) -#define TXD_W0_IFS FIELD32(0x00006000) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_CIPHER FIELD32(0x20000000) -#define TXD_W0_KEY_ID FIELD32(0xc0000000) - -/* - * Word1 - */ -#define TXD_W1_IV_OFFSET FIELD32(0x0000003f) -#define TXD_W1_AIFS FIELD32(0x000000c0) -#define TXD_W1_CWMIN FIELD32(0x00000f00) -#define TXD_W1_CWMAX FIELD32(0x0000f000) - -/* - * Word2: PLCP information - */ -#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word3 - */ -#define TXD_W3_IV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define TXD_W4_EIV FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) -#define RXD_W0_MULTICAST FIELD32(0x00000004) -#define RXD_W0_BROADCAST FIELD32(0x00000008) -#define RXD_W0_MY_BSS FIELD32(0x00000010) -#define RXD_W0_CRC_ERROR FIELD32(0x00000020) -#define RXD_W0_OFDM FIELD32(0x00000040) -#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) -#define RXD_W0_CIPHER FIELD32(0x00000100) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000200) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) - -/* - * Word1 - */ -#define RXD_W1_RSSI FIELD32(0x000000ff) -#define RXD_W1_SIGNAL FIELD32(0x0000ff00) - -/* - * Word2 - */ -#define RXD_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - */ -#define RXD_W3_EIV FIELD32(0xffffffff) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ - (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) - -#endif /* RT2500USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h deleted file mode 100644 index 95c1d7c0a2f3..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ /dev/null @@ -1,2986 +0,0 @@ -/* - Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> - Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> - Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> - Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2800 - Abstract: Data structures and registers for the rt2800 modules. - Supported chipsets: RT2800E, RT2800ED & RT2800U. - */ - -#ifndef RT2800_H -#define RT2800_H - -/* - * RF chip defines. - * - * RF2820 2.4G 2T3R - * RF2850 2.4G/5G 2T3R - * RF2720 2.4G 1T2R - * RF2750 2.4G/5G 1T2R - * RF3020 2.4G 1T1R - * RF2020 2.4G B/G - * RF3021 2.4G 1T2R - * RF3022 2.4G 2T2R - * RF3052 2.4G/5G 2T2R - * RF2853 2.4G/5G 3T3R - * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) - * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) - * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662) - * RF5592 2.4G/5G 2T2R - * RF3070 2.4G 1T1R - * RF5360 2.4G 1T1R - * RF5362 2.4G 1T1R - * RF5370 2.4G 1T1R - * RF5390 2.4G 1T1R - */ -#define RF2820 0x0001 -#define RF2850 0x0002 -#define RF2720 0x0003 -#define RF2750 0x0004 -#define RF3020 0x0005 -#define RF2020 0x0006 -#define RF3021 0x0007 -#define RF3022 0x0008 -#define RF3052 0x0009 -#define RF2853 0x000a -#define RF3320 0x000b -#define RF3322 0x000c -#define RF3053 0x000d -#define RF5592 0x000f -#define RF3070 0x3070 -#define RF3290 0x3290 -#define RF5360 0x5360 -#define RF5362 0x5362 -#define RF5370 0x5370 -#define RF5372 0x5372 -#define RF5390 0x5390 -#define RF5392 0x5392 - -/* - * Chipset revisions. - */ -#define REV_RT2860C 0x0100 -#define REV_RT2860D 0x0101 -#define REV_RT2872E 0x0200 -#define REV_RT3070E 0x0200 -#define REV_RT3070F 0x0201 -#define REV_RT3071E 0x0211 -#define REV_RT3090E 0x0211 -#define REV_RT3390E 0x0211 -#define REV_RT3593E 0x0211 -#define REV_RT5390F 0x0502 -#define REV_RT5390R 0x1502 -#define REV_RT5592C 0x0221 - -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x1000 -#define CSR_REG_SIZE 0x0800 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0200 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x00ff -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 -#define RFCSR_BASE 0x0000 -#define RFCSR_SIZE 0x0040 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 4 - -/* - * Registers. - */ - - -/* - * MAC_CSR0_3290: MAC_CSR0 for RT3290 to identity MAC version number. - */ -#define MAC_CSR0_3290 0x0000 - -/* - * E2PROM_CSR: PCI EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE: 0: 93c46, 1:93c66. - * LOAD_STATUS: 1:loading, 0:done. - */ -#define E2PROM_CSR 0x0004 -#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) -#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) -#define E2PROM_CSR_DATA_IN FIELD32(0x00000004) -#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) -#define E2PROM_CSR_TYPE FIELD32(0x00000030) -#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) -#define E2PROM_CSR_RELOAD FIELD32(0x00000080) - -/* - * CMB_CTRL_CFG - */ -#define CMB_CTRL 0x0020 -#define AUX_OPT_BIT0 FIELD32(0x00000001) -#define AUX_OPT_BIT1 FIELD32(0x00000002) -#define AUX_OPT_BIT2 FIELD32(0x00000004) -#define AUX_OPT_BIT3 FIELD32(0x00000008) -#define AUX_OPT_BIT4 FIELD32(0x00000010) -#define AUX_OPT_BIT5 FIELD32(0x00000020) -#define AUX_OPT_BIT6 FIELD32(0x00000040) -#define AUX_OPT_BIT7 FIELD32(0x00000080) -#define AUX_OPT_BIT8 FIELD32(0x00000100) -#define AUX_OPT_BIT9 FIELD32(0x00000200) -#define AUX_OPT_BIT10 FIELD32(0x00000400) -#define AUX_OPT_BIT11 FIELD32(0x00000800) -#define AUX_OPT_BIT12 FIELD32(0x00001000) -#define AUX_OPT_BIT13 FIELD32(0x00002000) -#define AUX_OPT_BIT14 FIELD32(0x00004000) -#define AUX_OPT_BIT15 FIELD32(0x00008000) -#define LDO25_LEVEL FIELD32(0x00030000) -#define LDO25_LARGEA FIELD32(0x00040000) -#define LDO25_FRC_ON FIELD32(0x00080000) -#define CMB_RSV FIELD32(0x00300000) -#define XTAL_RDY FIELD32(0x00400000) -#define PLL_LD FIELD32(0x00800000) -#define LDO_CORE_LEVEL FIELD32(0x0F000000) -#define LDO_BGSEL FIELD32(0x30000000) -#define LDO3_EN FIELD32(0x40000000) -#define LDO0_EN FIELD32(0x80000000) - -/* - * EFUSE_CSR_3290: RT3290 EEPROM - */ -#define EFUSE_CTRL_3290 0x0024 - -/* - * EFUSE_DATA3 of 3290 - */ -#define EFUSE_DATA3_3290 0x0028 - -/* - * EFUSE_DATA2 of 3290 - */ -#define EFUSE_DATA2_3290 0x002c - -/* - * EFUSE_DATA1 of 3290 - */ -#define EFUSE_DATA1_3290 0x0030 - -/* - * EFUSE_DATA0 of 3290 - */ -#define EFUSE_DATA0_3290 0x0034 - -/* - * OSC_CTRL_CFG - * Ring oscillator configuration - */ -#define OSC_CTRL 0x0038 -#define OSC_REF_CYCLE FIELD32(0x00001fff) -#define OSC_RSV FIELD32(0x0000e000) -#define OSC_CAL_CNT FIELD32(0x0fff0000) -#define OSC_CAL_ACK FIELD32(0x10000000) -#define OSC_CLK_32K_VLD FIELD32(0x20000000) -#define OSC_CAL_REQ FIELD32(0x40000000) -#define OSC_ROSC_EN FIELD32(0x80000000) - -/* - * COEX_CFG_0 - */ -#define COEX_CFG0 0x0040 -#define COEX_CFG_ANT FIELD32(0xff000000) -/* - * COEX_CFG_1 - */ -#define COEX_CFG1 0x0044 - -/* - * COEX_CFG_2 - */ -#define COEX_CFG2 0x0048 -#define BT_COEX_CFG1 FIELD32(0xff000000) -#define BT_COEX_CFG0 FIELD32(0x00ff0000) -#define WL_COEX_CFG1 FIELD32(0x0000ff00) -#define WL_COEX_CFG0 FIELD32(0x000000ff) -/* - * PLL_CTRL_CFG - * PLL configuration register - */ -#define PLL_CTRL 0x0050 -#define PLL_RESERVED_INPUT1 FIELD32(0x000000ff) -#define PLL_RESERVED_INPUT2 FIELD32(0x0000ff00) -#define PLL_CONTROL FIELD32(0x00070000) -#define PLL_LPF_R1 FIELD32(0x00080000) -#define PLL_LPF_C1_CTRL FIELD32(0x00300000) -#define PLL_LPF_C2_CTRL FIELD32(0x00c00000) -#define PLL_CP_CURRENT_CTRL FIELD32(0x03000000) -#define PLL_PFD_DELAY_CTRL FIELD32(0x0c000000) -#define PLL_LOCK_CTRL FIELD32(0x70000000) -#define PLL_VBGBK_EN FIELD32(0x80000000) - - -/* - * WLAN_CTRL_CFG - * RT3290 wlan configuration - */ -#define WLAN_FUN_CTRL 0x0080 -#define WLAN_EN FIELD32(0x00000001) -#define WLAN_CLK_EN FIELD32(0x00000002) -#define WLAN_RSV1 FIELD32(0x00000004) -#define WLAN_RESET FIELD32(0x00000008) -#define PCIE_APP0_CLK_REQ FIELD32(0x00000010) -#define FRC_WL_ANT_SET FIELD32(0x00000020) -#define INV_TR_SW0 FIELD32(0x00000040) -#define WLAN_GPIO_IN_BIT0 FIELD32(0x00000100) -#define WLAN_GPIO_IN_BIT1 FIELD32(0x00000200) -#define WLAN_GPIO_IN_BIT2 FIELD32(0x00000400) -#define WLAN_GPIO_IN_BIT3 FIELD32(0x00000800) -#define WLAN_GPIO_IN_BIT4 FIELD32(0x00001000) -#define WLAN_GPIO_IN_BIT5 FIELD32(0x00002000) -#define WLAN_GPIO_IN_BIT6 FIELD32(0x00004000) -#define WLAN_GPIO_IN_BIT7 FIELD32(0x00008000) -#define WLAN_GPIO_IN_BIT_ALL FIELD32(0x0000ff00) -#define WLAN_GPIO_OUT_BIT0 FIELD32(0x00010000) -#define WLAN_GPIO_OUT_BIT1 FIELD32(0x00020000) -#define WLAN_GPIO_OUT_BIT2 FIELD32(0x00040000) -#define WLAN_GPIO_OUT_BIT3 FIELD32(0x00050000) -#define WLAN_GPIO_OUT_BIT4 FIELD32(0x00100000) -#define WLAN_GPIO_OUT_BIT5 FIELD32(0x00200000) -#define WLAN_GPIO_OUT_BIT6 FIELD32(0x00400000) -#define WLAN_GPIO_OUT_BIT7 FIELD32(0x00800000) -#define WLAN_GPIO_OUT_BIT_ALL FIELD32(0x00ff0000) -#define WLAN_GPIO_OUT_OE_BIT0 FIELD32(0x01000000) -#define WLAN_GPIO_OUT_OE_BIT1 FIELD32(0x02000000) -#define WLAN_GPIO_OUT_OE_BIT2 FIELD32(0x04000000) -#define WLAN_GPIO_OUT_OE_BIT3 FIELD32(0x08000000) -#define WLAN_GPIO_OUT_OE_BIT4 FIELD32(0x10000000) -#define WLAN_GPIO_OUT_OE_BIT5 FIELD32(0x20000000) -#define WLAN_GPIO_OUT_OE_BIT6 FIELD32(0x40000000) -#define WLAN_GPIO_OUT_OE_BIT7 FIELD32(0x80000000) -#define WLAN_GPIO_OUT_OE_BIT_ALL FIELD32(0xff000000) - -/* - * AUX_CTRL: Aux/PCI-E related configuration - */ -#define AUX_CTRL 0x10c -#define AUX_CTRL_WAKE_PCIE_EN FIELD32(0x00000002) -#define AUX_CTRL_FORCE_PCIE_CLK FIELD32(0x00000400) - -/* - * OPT_14: Unknown register used by rt3xxx devices. - */ -#define OPT_14_CSR 0x0114 -#define OPT_14_CSR_BIT0 FIELD32(0x00000001) - -/* - * INT_SOURCE_CSR: Interrupt source register. - * Write one to clear corresponding bit. - * TX_FIFO_STATUS: FIFO Statistics is full, sw should read TX_STA_FIFO - */ -#define INT_SOURCE_CSR 0x0200 -#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) -#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) -#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) -#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. - */ -#define INT_MASK_CSR 0x0204 -#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) -#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_MASK_CSR_TBTT FIELD32(0x00000800) -#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) -#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * WPDMA_GLO_CFG - */ -#define WPDMA_GLO_CFG 0x0208 -#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) -#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) -#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) -#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) -#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) -#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) -#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) -#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) -#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) - -/* - * WPDMA_RST_IDX - */ -#define WPDMA_RST_IDX 0x020c -#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) -#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) -#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) -#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) -#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) -#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) -#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) - -/* - * DELAY_INT_CFG - */ -#define DELAY_INT_CFG 0x0210 -#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) -#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) -#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) -#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) -#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) -#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) - -/* - * WMM_AIFSN_CFG: Aifsn for each EDCA AC - * AIFSN0: AC_VO - * AIFSN1: AC_VI - * AIFSN2: AC_BE - * AIFSN3: AC_BK - */ -#define WMM_AIFSN_CFG 0x0214 -#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) -#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) -#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) -#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) - -/* - * WMM_CWMIN_CSR: CWmin for each EDCA AC - * CWMIN0: AC_VO - * CWMIN1: AC_VI - * CWMIN2: AC_BE - * CWMIN3: AC_BK - */ -#define WMM_CWMIN_CFG 0x0218 -#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) -#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) -#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) -#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) - -/* - * WMM_CWMAX_CSR: CWmax for each EDCA AC - * CWMAX0: AC_VO - * CWMAX1: AC_VI - * CWMAX2: AC_BE - * CWMAX3: AC_BK - */ -#define WMM_CWMAX_CFG 0x021c -#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) -#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) -#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) -#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) - -/* - * AC_TXOP0: AC_VO/AC_VI TXOP register - * AC0TXOP: AC_VO in unit of 32us - * AC1TXOP: AC_VI in unit of 32us - */ -#define WMM_TXOP0_CFG 0x0220 -#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) -#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) - -/* - * AC_TXOP1: AC_BE/AC_BK TXOP register - * AC2TXOP: AC_BE in unit of 32us - * AC3TXOP: AC_BK in unit of 32us - */ -#define WMM_TXOP1_CFG 0x0224 -#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) -#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) - -/* - * GPIO_CTRL: - * GPIO_CTRL_VALx: GPIO value - * GPIO_CTRL_DIRx: GPIO direction: 0 = output; 1 = input - */ -#define GPIO_CTRL 0x0228 -#define GPIO_CTRL_VAL0 FIELD32(0x00000001) -#define GPIO_CTRL_VAL1 FIELD32(0x00000002) -#define GPIO_CTRL_VAL2 FIELD32(0x00000004) -#define GPIO_CTRL_VAL3 FIELD32(0x00000008) -#define GPIO_CTRL_VAL4 FIELD32(0x00000010) -#define GPIO_CTRL_VAL5 FIELD32(0x00000020) -#define GPIO_CTRL_VAL6 FIELD32(0x00000040) -#define GPIO_CTRL_VAL7 FIELD32(0x00000080) -#define GPIO_CTRL_DIR0 FIELD32(0x00000100) -#define GPIO_CTRL_DIR1 FIELD32(0x00000200) -#define GPIO_CTRL_DIR2 FIELD32(0x00000400) -#define GPIO_CTRL_DIR3 FIELD32(0x00000800) -#define GPIO_CTRL_DIR4 FIELD32(0x00001000) -#define GPIO_CTRL_DIR5 FIELD32(0x00002000) -#define GPIO_CTRL_DIR6 FIELD32(0x00004000) -#define GPIO_CTRL_DIR7 FIELD32(0x00008000) -#define GPIO_CTRL_VAL8 FIELD32(0x00010000) -#define GPIO_CTRL_VAL9 FIELD32(0x00020000) -#define GPIO_CTRL_VAL10 FIELD32(0x00040000) -#define GPIO_CTRL_DIR8 FIELD32(0x01000000) -#define GPIO_CTRL_DIR9 FIELD32(0x02000000) -#define GPIO_CTRL_DIR10 FIELD32(0x04000000) - -/* - * MCU_CMD_CFG - */ -#define MCU_CMD_CFG 0x022c - -/* - * AC_VO register offsets - */ -#define TX_BASE_PTR0 0x0230 -#define TX_MAX_CNT0 0x0234 -#define TX_CTX_IDX0 0x0238 -#define TX_DTX_IDX0 0x023c - -/* - * AC_VI register offsets - */ -#define TX_BASE_PTR1 0x0240 -#define TX_MAX_CNT1 0x0244 -#define TX_CTX_IDX1 0x0248 -#define TX_DTX_IDX1 0x024c - -/* - * AC_BE register offsets - */ -#define TX_BASE_PTR2 0x0250 -#define TX_MAX_CNT2 0x0254 -#define TX_CTX_IDX2 0x0258 -#define TX_DTX_IDX2 0x025c - -/* - * AC_BK register offsets - */ -#define TX_BASE_PTR3 0x0260 -#define TX_MAX_CNT3 0x0264 -#define TX_CTX_IDX3 0x0268 -#define TX_DTX_IDX3 0x026c - -/* - * HCCA register offsets - */ -#define TX_BASE_PTR4 0x0270 -#define TX_MAX_CNT4 0x0274 -#define TX_CTX_IDX4 0x0278 -#define TX_DTX_IDX4 0x027c - -/* - * MGMT register offsets - */ -#define TX_BASE_PTR5 0x0280 -#define TX_MAX_CNT5 0x0284 -#define TX_CTX_IDX5 0x0288 -#define TX_DTX_IDX5 0x028c - -/* - * RX register offsets - */ -#define RX_BASE_PTR 0x0290 -#define RX_MAX_CNT 0x0294 -#define RX_CRX_IDX 0x0298 -#define RX_DRX_IDX 0x029c - -/* - * USB_DMA_CFG - * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. - * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. - * PHY_CLEAR: phy watch dog enable. - * TX_CLEAR: Clear USB DMA TX path. - * TXOP_HALT: Halt TXOP count down when TX buffer is full. - * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation. - * RX_BULK_EN: Enable USB DMA Rx. - * TX_BULK_EN: Enable USB DMA Tx. - * EP_OUT_VALID: OUT endpoint data valid. - * RX_BUSY: USB DMA RX FSM busy. - * TX_BUSY: USB DMA TX FSM busy. - */ -#define USB_DMA_CFG 0x02a0 -#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff) -#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00) -#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000) -#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000) -#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000) -#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000) -#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000) -#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000) -#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000) -#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000) -#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000) - -/* - * US_CYC_CNT - * BT_MODE_EN: Bluetooth mode enable - * CLOCK CYCLE: Clock cycle count in 1us. - * PCI:0x21, PCIE:0x7d, USB:0x1e - */ -#define US_CYC_CNT 0x02a4 -#define US_CYC_CNT_BT_MODE_EN FIELD32(0x00000100) -#define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff) - -/* - * PBF_SYS_CTRL - * HOST_RAM_WRITE: enable Host program ram write selection - */ -#define PBF_SYS_CTRL 0x0400 -#define PBF_SYS_CTRL_READY FIELD32(0x00000080) -#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) - -/* - * HOST-MCU shared memory - */ -#define HOST_CMD_CSR 0x0404 -#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) - -/* - * PBF registers - * Most are for debug. Driver doesn't touch PBF register. - */ -#define PBF_CFG 0x0408 -#define PBF_MAX_PCNT 0x040c -#define PBF_CTRL 0x0410 -#define PBF_INT_STA 0x0414 -#define PBF_INT_ENA 0x0418 - -/* - * BCN_OFFSET0: - */ -#define BCN_OFFSET0 0x042c -#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) -#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) -#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) -#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) - -/* - * BCN_OFFSET1: - */ -#define BCN_OFFSET1 0x0430 -#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) -#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) -#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) -#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) - -/* - * TXRXQ_PCNT: PBF register - * PCNT_TX0Q: Page count for TX hardware queue 0 - * PCNT_TX1Q: Page count for TX hardware queue 1 - * PCNT_TX2Q: Page count for TX hardware queue 2 - * PCNT_RX0Q: Page count for RX hardware queue - */ -#define TXRXQ_PCNT 0x0438 -#define TXRXQ_PCNT_TX0Q FIELD32(0x000000ff) -#define TXRXQ_PCNT_TX1Q FIELD32(0x0000ff00) -#define TXRXQ_PCNT_TX2Q FIELD32(0x00ff0000) -#define TXRXQ_PCNT_RX0Q FIELD32(0xff000000) - -/* - * PBF register - * Debug. Driver doesn't touch PBF register. - */ -#define PBF_DBG 0x043c - -/* - * RF registers - */ -#define RF_CSR_CFG 0x0500 -#define RF_CSR_CFG_DATA FIELD32(0x000000ff) -#define RF_CSR_CFG_REGNUM FIELD32(0x00003f00) -#define RF_CSR_CFG_WRITE FIELD32(0x00010000) -#define RF_CSR_CFG_BUSY FIELD32(0x00020000) - -/* - * EFUSE_CSR: RT30x0 EEPROM - */ -#define EFUSE_CTRL 0x0580 -#define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000) -#define EFUSE_CTRL_MODE FIELD32(0x000000c0) -#define EFUSE_CTRL_KICK FIELD32(0x40000000) -#define EFUSE_CTRL_PRESENT FIELD32(0x80000000) - -/* - * EFUSE_DATA0 - */ -#define EFUSE_DATA0 0x0590 - -/* - * EFUSE_DATA1 - */ -#define EFUSE_DATA1 0x0594 - -/* - * EFUSE_DATA2 - */ -#define EFUSE_DATA2 0x0598 - -/* - * EFUSE_DATA3 - */ -#define EFUSE_DATA3 0x059c - -/* - * LDO_CFG0 - */ -#define LDO_CFG0 0x05d4 -#define LDO_CFG0_DELAY3 FIELD32(0x000000ff) -#define LDO_CFG0_DELAY2 FIELD32(0x0000ff00) -#define LDO_CFG0_DELAY1 FIELD32(0x00ff0000) -#define LDO_CFG0_BGSEL FIELD32(0x03000000) -#define LDO_CFG0_LDO_CORE_VLEVEL FIELD32(0x1c000000) -#define LD0_CFG0_LDO25_LEVEL FIELD32(0x60000000) -#define LDO_CFG0_LDO25_LARGEA FIELD32(0x80000000) - -/* - * GPIO_SWITCH - */ -#define GPIO_SWITCH 0x05dc -#define GPIO_SWITCH_0 FIELD32(0x00000001) -#define GPIO_SWITCH_1 FIELD32(0x00000002) -#define GPIO_SWITCH_2 FIELD32(0x00000004) -#define GPIO_SWITCH_3 FIELD32(0x00000008) -#define GPIO_SWITCH_4 FIELD32(0x00000010) -#define GPIO_SWITCH_5 FIELD32(0x00000020) -#define GPIO_SWITCH_6 FIELD32(0x00000040) -#define GPIO_SWITCH_7 FIELD32(0x00000080) - -/* - * FIXME: where the DEBUG_INDEX name come from? - */ -#define MAC_DEBUG_INDEX 0x05e8 -#define MAC_DEBUG_INDEX_XTAL FIELD32(0x80000000) - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - * ASIC_REV: 0 - * ASIC_VER: 2860 or 2870 - */ -#define MAC_CSR0 0x1000 -#define MAC_CSR0_REVISION FIELD32(0x0000ffff) -#define MAC_CSR0_CHIPSET FIELD32(0xffff0000) - -/* - * MAC_SYS_CTRL: - */ -#define MAC_SYS_CTRL 0x1004 -#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) -#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) -#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) -#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) -#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) -#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) -#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) -#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) - -/* - * MAC_ADDR_DW0: STA MAC register 0 - */ -#define MAC_ADDR_DW0 0x1008 -#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_ADDR_DW1: STA MAC register 1 - * UNICAST_TO_ME_MASK: - * Used to mask off bits from byte 5 of the MAC address - * to determine the UNICAST_TO_ME bit for RX frames. - * The full mask is complemented by BSS_ID_MASK: - * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK - */ -#define MAC_ADDR_DW1 0x100c -#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_BSSID_DW0: BSSID register 0 - */ -#define MAC_BSSID_DW0 0x1010 -#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_BSSID_DW1: BSSID register 1 - * BSS_ID_MASK: - * 0: 1-BSSID mode (BSS index = 0) - * 1: 2-BSSID mode (BSS index: Byte5, bit 0) - * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) - * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) - * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the - * BSSID. This will make sure that those bits will be ignored - * when determining the MY_BSS of RX frames. - */ -#define MAC_BSSID_DW1 0x1014 -#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) -#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) - -/* - * MAX_LEN_CFG: Maximum frame length register. - * MAX_MPDU: rt2860b max 16k bytes - * MAX_PSDU: Maximum PSDU length - * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 - */ -#define MAX_LEN_CFG 0x1018 -#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) -#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) -#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) -#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) - -/* - * BBP_CSR_CFG: BBP serial control register - * VALUE: Register value to program into BBP - * REG_NUM: Selected BBP register - * READ_CONTROL: 0 write BBP, 1 read BBP - * BUSY: ASIC is busy executing BBP commands - * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks - * BBP_RW_MODE: 0 serial, 1 parallel - */ -#define BBP_CSR_CFG 0x101c -#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) -#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) -#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) -#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) -#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) -#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) - -/* - * RF_CSR_CFG0: RF control register - * REGID_AND_VALUE: Register value to program into RF - * BITWIDTH: Selected RF register - * STANDBYMODE: 0 high when standby, 1 low when standby - * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate - * BUSY: ASIC is busy executing RF commands - */ -#define RF_CSR_CFG0 0x1020 -#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) -#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) -#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) -#define RF_CSR_CFG0_SEL FIELD32(0x40000000) -#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) - -/* - * RF_CSR_CFG1: RF control register - * REGID_AND_VALUE: Register value to program into RF - * RFGAP: Gap between BB_CONTROL_RF and RF_LE - * 0: 3 system clock cycle (37.5usec) - * 1: 5 system clock cycle (62.5usec) - */ -#define RF_CSR_CFG1 0x1024 -#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) - -/* - * RF_CSR_CFG2: RF control register - * VALUE: Register value to program into RF - */ -#define RF_CSR_CFG2 0x1028 -#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) - -/* - * LED_CFG: LED control - * ON_PERIOD: LED active time (ms) during TX (only used for LED mode 1) - * OFF_PERIOD: LED inactive time (ms) during TX (only used for LED mode 1) - * SLOW_BLINK_PERIOD: LED blink interval in seconds (only used for LED mode 2) - * color LED's: - * 0: off - * 1: blinking upon TX2 - * 2: periodic slow blinking - * 3: always on - * LED polarity: - * 0: active low - * 1: active high - */ -#define LED_CFG 0x102c -#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) -#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) -#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) -#define LED_CFG_R_LED_MODE FIELD32(0x03000000) -#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) -#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) -#define LED_CFG_LED_POLAR FIELD32(0x40000000) - -/* - * AMPDU_BA_WINSIZE: Force BlockAck window size - * FORCE_WINSIZE_ENABLE: - * 0: Disable forcing of BlockAck window size - * 1: Enable forcing of BlockAck window size, overwrites values BlockAck - * window size values in the TXWI - * FORCE_WINSIZE: BlockAck window size - */ -#define AMPDU_BA_WINSIZE 0x1040 -#define AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE FIELD32(0x00000020) -#define AMPDU_BA_WINSIZE_FORCE_WINSIZE FIELD32(0x0000001f) - -/* - * XIFS_TIME_CFG: MAC timing - * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX - * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX - * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX - * when MAC doesn't reference BBP signal BBRXEND - * EIFS: unit 1us - * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer - * - */ -#define XIFS_TIME_CFG 0x1100 -#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) -#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) -#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) -#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) -#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) - -/* - * BKOFF_SLOT_CFG: - */ -#define BKOFF_SLOT_CFG 0x1104 -#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) -#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) - -/* - * NAV_TIME_CFG: - */ -#define NAV_TIME_CFG 0x1108 -#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) -#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) -#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) -#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) - -/* - * CH_TIME_CFG: count as channel busy - * EIFS_BUSY: Count EIFS as channel busy - * NAV_BUSY: Count NAS as channel busy - * RX_BUSY: Count RX as channel busy - * TX_BUSY: Count TX as channel busy - * TMR_EN: Enable channel statistics timer - */ -#define CH_TIME_CFG 0x110c -#define CH_TIME_CFG_EIFS_BUSY FIELD32(0x00000010) -#define CH_TIME_CFG_NAV_BUSY FIELD32(0x00000008) -#define CH_TIME_CFG_RX_BUSY FIELD32(0x00000004) -#define CH_TIME_CFG_TX_BUSY FIELD32(0x00000002) -#define CH_TIME_CFG_TMR_EN FIELD32(0x00000001) - -/* - * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us - */ -#define PBF_LIFE_TIMER 0x1110 - -/* - * BCN_TIME_CFG: - * BEACON_INTERVAL: in unit of 1/16 TU - * TSF_TICKING: Enable TSF auto counting - * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode - * BEACON_GEN: Enable beacon generator - */ -#define BCN_TIME_CFG 0x1114 -#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) -#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) -#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) -#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) -#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) -#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) - -/* - * TBTT_SYNC_CFG: - * BCN_AIFSN: Beacon AIFSN after TBTT interrupt in slots - * BCN_CWMIN: Beacon CWMin after TBTT interrupt in slots - */ -#define TBTT_SYNC_CFG 0x1118 -#define TBTT_SYNC_CFG_TBTT_ADJUST FIELD32(0x000000ff) -#define TBTT_SYNC_CFG_BCN_EXP_WIN FIELD32(0x0000ff00) -#define TBTT_SYNC_CFG_BCN_AIFSN FIELD32(0x000f0000) -#define TBTT_SYNC_CFG_BCN_CWMIN FIELD32(0x00f00000) - -/* - * TSF_TIMER_DW0: Local lsb TSF timer, read-only - */ -#define TSF_TIMER_DW0 0x111c -#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) - -/* - * TSF_TIMER_DW1: Local msb TSF timer, read-only - */ -#define TSF_TIMER_DW1 0x1120 -#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) - -/* - * TBTT_TIMER: TImer remains till next TBTT, read-only - */ -#define TBTT_TIMER 0x1124 - -/* - * INT_TIMER_CFG: timer configuration - * PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU - * GP_TIMER: period of general purpose timer in units of 1/16 TU - */ -#define INT_TIMER_CFG 0x1128 -#define INT_TIMER_CFG_PRE_TBTT_TIMER FIELD32(0x0000ffff) -#define INT_TIMER_CFG_GP_TIMER FIELD32(0xffff0000) - -/* - * INT_TIMER_EN: GP-timer and pre-tbtt Int enable - */ -#define INT_TIMER_EN 0x112c -#define INT_TIMER_EN_PRE_TBTT_TIMER FIELD32(0x00000001) -#define INT_TIMER_EN_GP_TIMER FIELD32(0x00000002) - -/* - * CH_IDLE_STA: channel idle time (in us) - */ -#define CH_IDLE_STA 0x1130 - -/* - * CH_BUSY_STA: channel busy time on primary channel (in us) - */ -#define CH_BUSY_STA 0x1134 - -/* - * CH_BUSY_STA_SEC: channel busy time on secondary channel in HT40 mode (in us) - */ -#define CH_BUSY_STA_SEC 0x1138 - -/* - * MAC_STATUS_CFG: - * BBP_RF_BUSY: When set to 0, BBP and RF are stable. - * if 1 or higher one of the 2 registers is busy. - */ -#define MAC_STATUS_CFG 0x1200 -#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) - -/* - * PWR_PIN_CFG: - */ -#define PWR_PIN_CFG 0x1204 - -/* - * AUTOWAKEUP_CFG: Manual power control / status register - * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set - * AUTOWAKE: 0:sleep, 1:awake - */ -#define AUTOWAKEUP_CFG 0x1208 -#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) -#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) -#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) - -/* - * EDCA_AC0_CFG: - */ -#define EDCA_AC0_CFG 0x1300 -#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC1_CFG: - */ -#define EDCA_AC1_CFG 0x1304 -#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC2_CFG: - */ -#define EDCA_AC2_CFG 0x1308 -#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC3_CFG: - */ -#define EDCA_AC3_CFG 0x130c -#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_TID_AC_MAP: - */ -#define EDCA_TID_AC_MAP 0x1310 - -/* - * TX_PWR_CFG: - */ -#define TX_PWR_CFG_RATE0 FIELD32(0x0000000f) -#define TX_PWR_CFG_RATE1 FIELD32(0x000000f0) -#define TX_PWR_CFG_RATE2 FIELD32(0x00000f00) -#define TX_PWR_CFG_RATE3 FIELD32(0x0000f000) -#define TX_PWR_CFG_RATE4 FIELD32(0x000f0000) -#define TX_PWR_CFG_RATE5 FIELD32(0x00f00000) -#define TX_PWR_CFG_RATE6 FIELD32(0x0f000000) -#define TX_PWR_CFG_RATE7 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_0: - */ -#define TX_PWR_CFG_0 0x1314 -#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) -#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) -#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) -#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) -/* bits for 3T devices */ -#define TX_PWR_CFG_0_CCK1_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_0_CCK1_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_0_CCK5_CH0 FIELD32(0x00000f00) -#define TX_PWR_CFG_0_CCK5_CH1 FIELD32(0x0000f000) -#define TX_PWR_CFG_0_OFDM6_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000) -#define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_1: - */ -#define TX_PWR_CFG_1 0x1318 -#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) -#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) -#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) -#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) -/* bits for 3T devices */ -#define TX_PWR_CFG_1_OFDM24_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_1_OFDM24_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_1_OFDM48_CH0 FIELD32(0x00000f00) -#define TX_PWR_CFG_1_OFDM48_CH1 FIELD32(0x0000f000) -#define TX_PWR_CFG_1_MCS0_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000) -#define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_2: - */ -#define TX_PWR_CFG_2 0x131c -#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) -#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) -#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) -#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) -#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) -#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) -#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) -#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) -/* bits for 3T devices */ -#define TX_PWR_CFG_2_MCS4_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_2_MCS4_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_2_MCS6_CH0 FIELD32(0x00000f00) -#define TX_PWR_CFG_2_MCS6_CH1 FIELD32(0x0000f000) -#define TX_PWR_CFG_2_MCS8_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000) -#define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_3: - */ -#define TX_PWR_CFG_3 0x1320 -#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) -#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) -#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) -#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) -#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) -#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) -#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) -#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) -/* bits for 3T devices */ -#define TX_PWR_CFG_3_MCS12_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_3_MCS12_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_3_MCS14_CH0 FIELD32(0x00000f00) -#define TX_PWR_CFG_3_MCS14_CH1 FIELD32(0x0000f000) -#define TX_PWR_CFG_3_STBC0_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000) -#define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_4: - */ -#define TX_PWR_CFG_4 0x1324 -#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) -#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) -#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) -#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) -/* bits for 3T devices */ -#define TX_PWR_CFG_3_STBC4_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_3_STBC4_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_3_STBC6_CH0 FIELD32(0x00000f00) -#define TX_PWR_CFG_3_STBC6_CH1 FIELD32(0x0000f000) - -/* - * TX_PIN_CFG: - */ -#define TX_PIN_CFG 0x1328 -#define TX_PIN_CFG_PA_PE_DISABLE 0xfcfffff0 -#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) -#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) -#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) -#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) -#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) -#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) -#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) -#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) -#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) -#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) -#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) -#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) -#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) -#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) -#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) -#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) -#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) -#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) -#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) -#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) -#define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000) -#define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000) -#define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000) -#define TX_PIN_CFG_PA_PE_G2_POL FIELD32(0x08000000) -#define TX_PIN_CFG_LNA_PE_A2_EN FIELD32(0x10000000) -#define TX_PIN_CFG_LNA_PE_G2_EN FIELD32(0x20000000) -#define TX_PIN_CFG_LNA_PE_A2_POL FIELD32(0x40000000) -#define TX_PIN_CFG_LNA_PE_G2_POL FIELD32(0x80000000) - -/* - * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz - */ -#define TX_BAND_CFG 0x132c -#define TX_BAND_CFG_HT40_MINUS FIELD32(0x00000001) -#define TX_BAND_CFG_A FIELD32(0x00000002) -#define TX_BAND_CFG_BG FIELD32(0x00000004) - -/* - * TX_SW_CFG0: - */ -#define TX_SW_CFG0 0x1330 - -/* - * TX_SW_CFG1: - */ -#define TX_SW_CFG1 0x1334 - -/* - * TX_SW_CFG2: - */ -#define TX_SW_CFG2 0x1338 - -/* - * TXOP_THRES_CFG: - */ -#define TXOP_THRES_CFG 0x133c - -/* - * TXOP_CTRL_CFG: - * TIMEOUT_TRUN_EN: Enable/Disable TXOP timeout truncation - * AC_TRUN_EN: Enable/Disable truncation for AC change - * TXRATEGRP_TRUN_EN: Enable/Disable truncation for TX rate group change - * USER_MODE_TRUN_EN: Enable/Disable truncation for user TXOP mode - * MIMO_PS_TRUN_EN: Enable/Disable truncation for MIMO PS RTS/CTS - * RESERVED_TRUN_EN: Reserved - * LSIG_TXOP_EN: Enable/Disable L-SIG TXOP protection - * EXT_CCA_EN: Enable/Disable extension channel CCA reference (Defer 40Mhz - * transmissions if extension CCA is clear). - * EXT_CCA_DLY: Extension CCA signal delay time (unit: us) - * EXT_CWMIN: CwMin for extension channel backoff - * 0: Disabled - * - */ -#define TXOP_CTRL_CFG 0x1340 -#define TXOP_CTRL_CFG_TIMEOUT_TRUN_EN FIELD32(0x00000001) -#define TXOP_CTRL_CFG_AC_TRUN_EN FIELD32(0x00000002) -#define TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN FIELD32(0x00000004) -#define TXOP_CTRL_CFG_USER_MODE_TRUN_EN FIELD32(0x00000008) -#define TXOP_CTRL_CFG_MIMO_PS_TRUN_EN FIELD32(0x00000010) -#define TXOP_CTRL_CFG_RESERVED_TRUN_EN FIELD32(0x00000020) -#define TXOP_CTRL_CFG_LSIG_TXOP_EN FIELD32(0x00000040) -#define TXOP_CTRL_CFG_EXT_CCA_EN FIELD32(0x00000080) -#define TXOP_CTRL_CFG_EXT_CCA_DLY FIELD32(0x0000ff00) -#define TXOP_CTRL_CFG_EXT_CWMIN FIELD32(0x000f0000) - -/* - * TX_RTS_CFG: - * RTS_THRES: unit:byte - * RTS_FBK_EN: enable rts rate fallback - */ -#define TX_RTS_CFG 0x1344 -#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) -#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) -#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) - -/* - * TX_TIMEOUT_CFG: - * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us - * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure - * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. - * it is recommended that: - * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) - */ -#define TX_TIMEOUT_CFG 0x1348 -#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) -#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) -#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) - -/* - * TX_RTY_CFG: - * SHORT_RTY_LIMIT: short retry limit - * LONG_RTY_LIMIT: long retry limit - * LONG_RTY_THRE: Long retry threshoold - * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * AGG_RTY_MODE: Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable - */ -#define TX_RTY_CFG 0x134c -#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) -#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) -#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) -#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) -#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) -#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) - -/* - * TX_LINK_CFG: - * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us - * MFB_ENABLE: TX apply remote MFB 1:enable - * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable - * 0: not apply remote remote unsolicit (MFS=7) - * TX_MRQ_EN: MCS request TX enable - * TX_RDG_EN: RDG TX enable - * TX_CF_ACK_EN: Piggyback CF-ACK enable - * REMOTE_MFB: remote MCS feedback - * REMOTE_MFS: remote MCS feedback sequence number - */ -#define TX_LINK_CFG 0x1350 -#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) -#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) -#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) -#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) -#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) -#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) -#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) -#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) - -/* - * HT_FBK_CFG0: - */ -#define HT_FBK_CFG0 0x1354 -#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) -#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) -#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) -#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) -#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) -#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) -#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) -#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) - -/* - * HT_FBK_CFG1: - */ -#define HT_FBK_CFG1 0x1358 -#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) -#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) -#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) -#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) -#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) -#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) -#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) -#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG0: - */ -#define LG_FBK_CFG0 0x135c -#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) -#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) -#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) -#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) -#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG1: - */ -#define LG_FBK_CFG1 0x1360 -#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) - -/* - * CCK_PROT_CFG: CCK Protection - * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) - * PROTECT_CTRL: Protection control frame type for CCK TX - * 0:none, 1:RTS/CTS, 2:CTS-to-self - * PROTECT_NAV_SHORT: TXOP protection type for CCK TX with short NAV - * PROTECT_NAV_LONG: TXOP protection type for CCK TX with long NAV - * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow - * RTS_TH_EN: RTS threshold enable on CCK TX - */ -#define CCK_PROT_CFG 0x1364 -#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define CCK_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) -#define CCK_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) -#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * OFDM_PROT_CFG: OFDM Protection - */ -#define OFDM_PROT_CFG 0x1368 -#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define OFDM_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) -#define OFDM_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM20_PROT_CFG: MM20 Protection - */ -#define MM20_PROT_CFG 0x136c -#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) -#define MM20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) -#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM40_PROT_CFG: MM40 Protection - */ -#define MM40_PROT_CFG 0x1370 -#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) -#define MM40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) -#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF20_PROT_CFG: GF20 Protection - */ -#define GF20_PROT_CFG 0x1374 -#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) -#define GF20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) -#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF40_PROT_CFG: GF40 Protection - */ -#define GF40_PROT_CFG 0x1378 -#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) -#define GF40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) -#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * EXP_CTS_TIME: - */ -#define EXP_CTS_TIME 0x137c - -/* - * EXP_ACK_TIME: - */ -#define EXP_ACK_TIME 0x1380 - -/* TX_PWR_CFG_5 */ -#define TX_PWR_CFG_5 0x1384 -#define TX_PWR_CFG_5_MCS16_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_5_MCS16_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_5_MCS16_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_5_MCS18_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_5_MCS18_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_5_MCS18_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_6 */ -#define TX_PWR_CFG_6 0x1388 -#define TX_PWR_CFG_6_MCS20_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_6_MCS20_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_6_MCS20_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_6_MCS22_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_6_MCS22_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_6_MCS22_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_0_EXT */ -#define TX_PWR_CFG_0_EXT 0x1390 -#define TX_PWR_CFG_0_EXT_CCK1_CH2 FIELD32(0x0000000f) -#define TX_PWR_CFG_0_EXT_CCK5_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_0_EXT_OFDM6_CH2 FIELD32(0x000f0000) -#define TX_PWR_CFG_0_EXT_OFDM12_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_1_EXT */ -#define TX_PWR_CFG_1_EXT 0x1394 -#define TX_PWR_CFG_1_EXT_OFDM24_CH2 FIELD32(0x0000000f) -#define TX_PWR_CFG_1_EXT_OFDM48_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_1_EXT_MCS0_CH2 FIELD32(0x000f0000) -#define TX_PWR_CFG_1_EXT_MCS2_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_2_EXT */ -#define TX_PWR_CFG_2_EXT 0x1398 -#define TX_PWR_CFG_2_EXT_MCS4_CH2 FIELD32(0x0000000f) -#define TX_PWR_CFG_2_EXT_MCS6_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_2_EXT_MCS8_CH2 FIELD32(0x000f0000) -#define TX_PWR_CFG_2_EXT_MCS10_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_3_EXT */ -#define TX_PWR_CFG_3_EXT 0x139c -#define TX_PWR_CFG_3_EXT_MCS12_CH2 FIELD32(0x0000000f) -#define TX_PWR_CFG_3_EXT_MCS14_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_3_EXT_STBC0_CH2 FIELD32(0x000f0000) -#define TX_PWR_CFG_3_EXT_STBC2_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_4_EXT */ -#define TX_PWR_CFG_4_EXT 0x13a0 -#define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f) -#define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00) - -/* TX_PWR_CFG_7 */ -#define TX_PWR_CFG_7 0x13d4 -#define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_7_OFDM54_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_7_OFDM54_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_8 */ -#define TX_PWR_CFG_8 0x13d8 -#define TX_PWR_CFG_8_MCS15_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_8_MCS15_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_8_MCS15_CH2 FIELD32(0x00000f00) -#define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000) -#define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000) -#define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000) - -/* TX_PWR_CFG_9 */ -#define TX_PWR_CFG_9 0x13dc -#define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f) -#define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0) -#define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00) - -/* - * RX_FILTER_CFG: RX configuration register. - */ -#define RX_FILTER_CFG 0x1400 -#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) -#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) -#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) -#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) -#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) -#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) -#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) -#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) -#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) -#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) -#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) -#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) -#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) -#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) -#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) -#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) -#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) - -/* - * AUTO_RSP_CFG: - * AUTORESPONDER: 0: disable, 1: enable - * BAC_ACK_POLICY: 0:long, 1:short preamble - * CTS_40_MMODE: Response CTS 40MHz duplicate mode - * CTS_40_MREF: Response CTS 40MHz duplicate mode - * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble - * DUAL_CTS_EN: Power bit value in control frame - * ACK_CTS_PSM_BIT:Power bit value in control frame - */ -#define AUTO_RSP_CFG 0x1404 -#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) -#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) -#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) -#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) -#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) -#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) -#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) - -/* - * LEGACY_BASIC_RATE: - */ -#define LEGACY_BASIC_RATE 0x1408 - -/* - * HT_BASIC_RATE: - */ -#define HT_BASIC_RATE 0x140c - -/* - * HT_CTRL_CFG: - */ -#define HT_CTRL_CFG 0x1410 - -/* - * SIFS_COST_CFG: - */ -#define SIFS_COST_CFG 0x1414 - -/* - * RX_PARSER_CFG: - * Set NAV for all received frames - */ -#define RX_PARSER_CFG 0x1418 - -/* - * TX_SEC_CNT0: - */ -#define TX_SEC_CNT0 0x1500 - -/* - * RX_SEC_CNT0: - */ -#define RX_SEC_CNT0 0x1504 - -/* - * CCMP_FC_MUTE: - */ -#define CCMP_FC_MUTE 0x1508 - -/* - * TXOP_HLDR_ADDR0: - */ -#define TXOP_HLDR_ADDR0 0x1600 - -/* - * TXOP_HLDR_ADDR1: - */ -#define TXOP_HLDR_ADDR1 0x1604 - -/* - * TXOP_HLDR_ET: - */ -#define TXOP_HLDR_ET 0x1608 - -/* - * QOS_CFPOLL_RA_DW0: - */ -#define QOS_CFPOLL_RA_DW0 0x160c - -/* - * QOS_CFPOLL_RA_DW1: - */ -#define QOS_CFPOLL_RA_DW1 0x1610 - -/* - * QOS_CFPOLL_QC: - */ -#define QOS_CFPOLL_QC 0x1614 - -/* - * RX_STA_CNT0: RX PLCP error count & RX CRC error count - */ -#define RX_STA_CNT0 0x1700 -#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) -#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT1: RX False CCA count & RX LONG frame count - */ -#define RX_STA_CNT1 0x1704 -#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) -#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT2: - */ -#define RX_STA_CNT2 0x1708 -#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) -#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) - -/* - * TX_STA_CNT0: TX Beacon count - */ -#define TX_STA_CNT0 0x170c -#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_CNT1: TX tx count - */ -#define TX_STA_CNT1 0x1710 -#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) -#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) - -/* - * TX_STA_CNT2: TX tx count - */ -#define TX_STA_CNT2 0x1714 -#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_FIFO: TX Result for specific PID status fifo register. - * - * This register is implemented as FIFO with 16 entries in the HW. Each - * register read fetches the next tx result. If the FIFO is full because - * it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS) - * triggered, the hw seems to simply drop further tx results. - * - * VALID: 1: this tx result is valid - * 0: no valid tx result -> driver should stop reading - * PID_TYPE: The PID latched from the PID field in the TXWI, can be used - * to match a frame with its tx result (even though the PID is - * only 4 bits wide). - * PID_QUEUE: Part of PID_TYPE, this is the queue index number (0-3) - * PID_ENTRY: Part of PID_TYPE, this is the queue entry index number (1-3) - * This identification number is calculated by ((idx % 3) + 1). - * TX_SUCCESS: Indicates tx success (1) or failure (0) - * TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0) - * TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0) - * WCID: The wireless client ID. - * MCS: The tx rate used during the last transmission of this frame, be it - * successful or not. - * PHYMODE: The phymode used for the transmission. - */ -#define TX_STA_FIFO 0x1718 -#define TX_STA_FIFO_VALID FIELD32(0x00000001) -#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) -#define TX_STA_FIFO_PID_QUEUE FIELD32(0x00000006) -#define TX_STA_FIFO_PID_ENTRY FIELD32(0x00000018) -#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) -#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) -#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) -#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) -#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) -#define TX_STA_FIFO_MCS FIELD32(0x007f0000) -#define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000) - -/* - * TX_AGG_CNT: Debug counter - */ -#define TX_AGG_CNT 0x171c -#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT0: - */ -#define TX_AGG_CNT0 0x1720 -#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT1: - */ -#define TX_AGG_CNT1 0x1724 -#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT2: - */ -#define TX_AGG_CNT2 0x1728 -#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT3: - */ -#define TX_AGG_CNT3 0x172c -#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT4: - */ -#define TX_AGG_CNT4 0x1730 -#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT5: - */ -#define TX_AGG_CNT5 0x1734 -#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT6: - */ -#define TX_AGG_CNT6 0x1738 -#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT7: - */ -#define TX_AGG_CNT7 0x173c -#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) - -/* - * MPDU_DENSITY_CNT: - * TX_ZERO_DEL: TX zero length delimiter count - * RX_ZERO_DEL: RX zero length delimiter count - */ -#define MPDU_DENSITY_CNT 0x1740 -#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) -#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) - -/* - * Security key table memory. - * - * The pairwise key table shares some memory with the beacon frame - * buffers 6 and 7. That basically means that when beacon 6 & 7 - * are used we should only use the reduced pairwise key table which - * has a maximum of 222 entries. - * - * --------------------------------------------- - * |0x4000 | Pairwise Key | Reduced Pairwise | - * | | Table | Key Table | - * | | Size: 256 * 32 | Size: 222 * 32 | - * |0x5BC0 | |------------------- - * | | | Beacon 6 | - * |0x5DC0 | |------------------- - * | | | Beacon 7 | - * |0x5FC0 | |------------------- - * |0x5FFF | | - * -------------------------- - * - * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry - * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry - * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry - * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry - * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry - * SHARED_KEY_MODE_BASE: 4-byte * 16-entry - */ -#define MAC_WCID_BASE 0x1800 -#define PAIRWISE_KEY_TABLE_BASE 0x4000 -#define MAC_IVEIV_TABLE_BASE 0x6000 -#define MAC_WCID_ATTRIBUTE_BASE 0x6800 -#define SHARED_KEY_TABLE_BASE 0x6c00 -#define SHARED_KEY_MODE_BASE 0x7000 - -#define MAC_WCID_ENTRY(__idx) \ - (MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry))) -#define PAIRWISE_KEY_ENTRY(__idx) \ - (PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry))) -#define MAC_IVEIV_ENTRY(__idx) \ - (MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry))) -#define MAC_WCID_ATTR_ENTRY(__idx) \ - (MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32))) -#define SHARED_KEY_ENTRY(__idx) \ - (SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry))) -#define SHARED_KEY_MODE_ENTRY(__idx) \ - (SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32))) - -struct mac_wcid_entry { - u8 mac[6]; - u8 reserved[2]; -} __packed; - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __packed; - -struct mac_iveiv_entry { - u8 iv[8]; -} __packed; - -/* - * MAC_WCID_ATTRIBUTE: - */ -#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) -#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) -#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) -#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) -#define MAC_WCID_ATTRIBUTE_CIPHER_EXT FIELD32(0x00000400) -#define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT FIELD32(0x00000800) -#define MAC_WCID_ATTRIBUTE_WAPI_MCBC FIELD32(0x00008000) -#define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX FIELD32(0xff000000) - -/* - * SHARED_KEY_MODE: - */ -#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) -#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) -#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) -#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) -#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) -#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) -#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) -#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) - -/* - * HOST-MCU communication - */ - -/* - * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. - * CMD_TOKEN: Command id, 0xff disable status reporting. - */ -#define H2M_MAILBOX_CSR 0x7010 -#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) - -/* - * H2M_MAILBOX_CID: - * Free slots contain 0xff. MCU will store command's token to lowest free slot. - * If all slots are occupied status will be dropped. - */ -#define H2M_MAILBOX_CID 0x7014 -#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) -#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) - -/* - * H2M_MAILBOX_STATUS: - * Command status will be saved to same slot as command id. - */ -#define H2M_MAILBOX_STATUS 0x701c - -/* - * H2M_INT_SRC: - */ -#define H2M_INT_SRC 0x7024 - -/* - * H2M_BBP_AGENT: - */ -#define H2M_BBP_AGENT 0x7028 - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD8(0x1f) -#define MCU_LEDCS_POLARITY FIELD8(0x01) - -/* - * HW_CS_CTS_BASE: - * Carrier-sense CTS frame base address. - * It's where mac stores carrier-sense frame for carrier-sense function. - */ -#define HW_CS_CTS_BASE 0x7700 - -/* - * HW_DFS_CTS_BASE: - * DFS CTS frame base address. It's where mac stores CTS frame for DFS. - */ -#define HW_DFS_CTS_BASE 0x7780 - -/* - * TXRX control registers - base address 0x3000 - */ - -/* - * TXRX_CSR1: - * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. - */ -#define TXRX_CSR1 0x77d0 - -/* - * HW_DEBUG_SETTING_BASE: - * since NULL frame won't be that long (256 byte) - * We steal 16 tail bytes to save debugging settings - */ -#define HW_DEBUG_SETTING_BASE 0x77f0 -#define HW_DEBUG_SETTING_BASE2 0x7770 - -/* - * HW_BEACON_BASE - * In order to support maximum 8 MBSS and its maximum length - * is 512 bytes for each beacon - * Three section discontinue memory segments will be used. - * 1. The original region for BCN 0~3 - * 2. Extract memory from FCE table for BCN 4~5 - * 3. Extract memory from Pair-wise key table for BCN 6~7 - * It occupied those memory of wcid 238~253 for BCN 6 - * and wcid 222~237 for BCN 7 (see Security key table memory - * for more info). - * - * IMPORTANT NOTE: Not sure why legacy driver does this, - * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. - */ -#define HW_BEACON_BASE0 0x7800 -#define HW_BEACON_BASE1 0x7a00 -#define HW_BEACON_BASE2 0x7c00 -#define HW_BEACON_BASE3 0x7e00 -#define HW_BEACON_BASE4 0x7200 -#define HW_BEACON_BASE5 0x7400 -#define HW_BEACON_BASE6 0x5dc0 -#define HW_BEACON_BASE7 0x5bc0 - -#define HW_BEACON_BASE(__index) \ - (((__index) < 4) ? (HW_BEACON_BASE0 + (__index * 0x0200)) : \ - (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \ - (HW_BEACON_BASE6 - ((__index - 6) * 0x0200)))) - -#define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64) - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * BBP 1: TX Antenna & Power Control - * POWER_CTRL: - * 0 - normal, - * 1 - drop tx power by 6dBm, - * 2 - drop tx power by 12dBm, - * 3 - increase tx power by 6dBm - */ -#define BBP1_TX_POWER_CTRL FIELD8(0x03) -#define BBP1_TX_ANTENNA FIELD8(0x18) - -/* - * BBP 3: RX Antenna - */ -#define BBP3_RX_ADC FIELD8(0x03) -#define BBP3_RX_ANTENNA FIELD8(0x18) -#define BBP3_HT40_MINUS FIELD8(0x20) -#define BBP3_ADC_MODE_SWITCH FIELD8(0x40) -#define BBP3_ADC_INIT_MODE FIELD8(0x80) - -/* - * BBP 4: Bandwidth - */ -#define BBP4_TX_BF FIELD8(0x01) -#define BBP4_BANDWIDTH FIELD8(0x18) -#define BBP4_MAC_IF_CTRL FIELD8(0x40) - -/* BBP27 */ -#define BBP27_RX_CHAIN_SEL FIELD8(0x60) - -/* - * BBP 47: Bandwidth - */ -#define BBP47_TSSI_REPORT_SEL FIELD8(0x03) -#define BBP47_TSSI_UPDATE_REQ FIELD8(0x04) -#define BBP47_TSSI_TSSI_MODE FIELD8(0x18) -#define BBP47_TSSI_ADC6 FIELD8(0x80) - -/* - * BBP 49 - */ -#define BBP49_UPDATE_FLAG FIELD8(0x01) - -/* - * BBP 105: - * - bit0: detect SIG on primary channel only (on 40MHz bandwidth) - * - bit1: FEQ (Feed Forward Compensation) for independend streams - * - bit2: MLD (Maximum Likehood Detection) for 2 streams (reserved on single - * stream) - * - bit4: channel estimation updates based on remodulation of - * L-SIG and HT-SIG symbols - */ -#define BBP105_DETECT_SIG_ON_PRIMARY FIELD8(0x01) -#define BBP105_FEQ FIELD8(0x02) -#define BBP105_MLD FIELD8(0x04) -#define BBP105_SIG_REMODULATION FIELD8(0x08) - -/* - * BBP 109 - */ -#define BBP109_TX0_POWER FIELD8(0x0f) -#define BBP109_TX1_POWER FIELD8(0xf0) - -/* BBP 110 */ -#define BBP110_TX2_POWER FIELD8(0x0f) - - -/* - * BBP 138: Unknown - */ -#define BBP138_RX_ADC1 FIELD8(0x02) -#define BBP138_RX_ADC2 FIELD8(0x04) -#define BBP138_TX_DAC1 FIELD8(0x20) -#define BBP138_TX_DAC2 FIELD8(0x40) - -/* - * BBP 152: Rx Ant - */ -#define BBP152_RX_DEFAULT_ANT FIELD8(0x80) - -/* - * BBP 254: unknown - */ -#define BBP254_BIT7 FIELD8(0x80) - -/* - * RFCSR registers - * The wordsize of the RFCSR is 8 bits. - */ - -/* - * RFCSR 1: - */ -#define RFCSR1_RF_BLOCK_EN FIELD8(0x01) -#define RFCSR1_PLL_PD FIELD8(0x02) -#define RFCSR1_RX0_PD FIELD8(0x04) -#define RFCSR1_TX0_PD FIELD8(0x08) -#define RFCSR1_RX1_PD FIELD8(0x10) -#define RFCSR1_TX1_PD FIELD8(0x20) -#define RFCSR1_RX2_PD FIELD8(0x40) -#define RFCSR1_TX2_PD FIELD8(0x80) - -/* - * RFCSR 2: - */ -#define RFCSR2_RESCAL_EN FIELD8(0x80) - -/* - * RFCSR 3: - */ -#define RFCSR3_K FIELD8(0x0f) -/* Bits [7-4] for RF3320 (RT3370/RT3390), on other chipsets reserved */ -#define RFCSR3_PA1_BIAS_CCK FIELD8(0x70) -#define RFCSR3_PA2_CASCODE_BIAS_CCKK FIELD8(0x80) -/* Bits for RF3290/RF5360/RF5362/RF5370/RF5372/RF5390/RF5392 */ -#define RFCSR3_VCOCAL_EN FIELD8(0x80) -/* Bits for RF3050 */ -#define RFCSR3_BIT1 FIELD8(0x02) -#define RFCSR3_BIT2 FIELD8(0x04) -#define RFCSR3_BIT3 FIELD8(0x08) -#define RFCSR3_BIT4 FIELD8(0x10) -#define RFCSR3_BIT5 FIELD8(0x20) - -/* - * FRCSR 5: - */ -#define RFCSR5_R1 FIELD8(0x0c) - -/* - * RFCSR 6: - */ -#define RFCSR6_R1 FIELD8(0x03) -#define RFCSR6_R2 FIELD8(0x40) -#define RFCSR6_TXDIV FIELD8(0x0c) -/* bits for RF3053 */ -#define RFCSR6_VCO_IC FIELD8(0xc0) - -/* - * RFCSR 7: - */ -#define RFCSR7_RF_TUNING FIELD8(0x01) -#define RFCSR7_BIT1 FIELD8(0x02) -#define RFCSR7_BIT2 FIELD8(0x04) -#define RFCSR7_BIT3 FIELD8(0x08) -#define RFCSR7_BIT4 FIELD8(0x10) -#define RFCSR7_BIT5 FIELD8(0x20) -#define RFCSR7_BITS67 FIELD8(0xc0) - -/* - * RFCSR 9: - */ -#define RFCSR9_K FIELD8(0x0f) -#define RFCSR9_N FIELD8(0x10) -#define RFCSR9_UNKNOWN FIELD8(0x60) -#define RFCSR9_MOD FIELD8(0x80) - -/* - * RFCSR 11: - */ -#define RFCSR11_R FIELD8(0x03) -#define RFCSR11_PLL_MOD FIELD8(0x0c) -#define RFCSR11_MOD FIELD8(0xc0) -/* bits for RF3053 */ -/* TODO: verify RFCSR11_MOD usage on other chips */ -#define RFCSR11_PLL_IDOH FIELD8(0x40) - - -/* - * RFCSR 12: - */ -#define RFCSR12_TX_POWER FIELD8(0x1f) -#define RFCSR12_DR0 FIELD8(0xe0) - -/* - * RFCSR 13: - */ -#define RFCSR13_TX_POWER FIELD8(0x1f) -#define RFCSR13_DR0 FIELD8(0xe0) - -/* - * RFCSR 15: - */ -#define RFCSR15_TX_LO2_EN FIELD8(0x08) - -/* - * RFCSR 16: - */ -#define RFCSR16_TXMIXER_GAIN FIELD8(0x07) - -/* - * RFCSR 17: - */ -#define RFCSR17_TXMIXER_GAIN FIELD8(0x07) -#define RFCSR17_TX_LO1_EN FIELD8(0x08) -#define RFCSR17_R FIELD8(0x20) -#define RFCSR17_CODE FIELD8(0x7f) - -/* RFCSR 18 */ -#define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40) - - -/* - * RFCSR 20: - */ -#define RFCSR20_RX_LO1_EN FIELD8(0x08) - -/* - * RFCSR 21: - */ -#define RFCSR21_RX_LO2_EN FIELD8(0x08) - -/* - * RFCSR 22: - */ -#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) - -/* - * RFCSR 23: - */ -#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) - -/* - * RFCSR 24: - */ -#define RFCSR24_TX_AGC_FC FIELD8(0x1f) -#define RFCSR24_TX_H20M FIELD8(0x20) -#define RFCSR24_TX_CALIB FIELD8(0x7f) - -/* - * RFCSR 27: - */ -#define RFCSR27_R1 FIELD8(0x03) -#define RFCSR27_R2 FIELD8(0x04) -#define RFCSR27_R3 FIELD8(0x30) -#define RFCSR27_R4 FIELD8(0x40) - -/* - * RFCSR 29: - */ -#define RFCSR29_ADC6_TEST FIELD8(0x01) -#define RFCSR29_ADC6_INT_TEST FIELD8(0x02) -#define RFCSR29_RSSI_RESET FIELD8(0x04) -#define RFCSR29_RSSI_ON FIELD8(0x08) -#define RFCSR29_RSSI_RIP_CTRL FIELD8(0x30) -#define RFCSR29_RSSI_GAIN FIELD8(0xc0) - -/* - * RFCSR 30: - */ -#define RFCSR30_TX_H20M FIELD8(0x02) -#define RFCSR30_RX_H20M FIELD8(0x04) -#define RFCSR30_RX_VCM FIELD8(0x18) -#define RFCSR30_RF_CALIBRATION FIELD8(0x80) - -/* - * RFCSR 31: - */ -#define RFCSR31_RX_AGC_FC FIELD8(0x1f) -#define RFCSR31_RX_H20M FIELD8(0x20) -#define RFCSR31_RX_CALIB FIELD8(0x7f) - -/* RFCSR 32 bits for RF3053 */ -#define RFCSR32_TX_AGC_FC FIELD8(0xf8) - -/* RFCSR 36 bits for RF3053 */ -#define RFCSR36_RF_BS FIELD8(0x80) - -/* - * RFCSR 38: - */ -#define RFCSR38_RX_LO1_EN FIELD8(0x20) - -/* - * RFCSR 39: - */ -#define RFCSR39_RX_DIV FIELD8(0x40) -#define RFCSR39_RX_LO2_EN FIELD8(0x80) - -/* - * RFCSR 49: - */ -#define RFCSR49_TX FIELD8(0x3f) -#define RFCSR49_EP FIELD8(0xc0) -/* bits for RT3593 */ -#define RFCSR49_TX_LO1_IC FIELD8(0x1c) -#define RFCSR49_TX_DIV FIELD8(0x20) - -/* - * RFCSR 50: - */ -#define RFCSR50_TX FIELD8(0x3f) -#define RFCSR50_EP FIELD8(0xc0) -/* bits for RT3593 */ -#define RFCSR50_TX_LO1_EN FIELD8(0x20) -#define RFCSR50_TX_LO2_EN FIELD8(0x10) - -/* RFCSR 51 */ -/* bits for RT3593 */ -#define RFCSR51_BITS01 FIELD8(0x03) -#define RFCSR51_BITS24 FIELD8(0x1c) -#define RFCSR51_BITS57 FIELD8(0xe0) - -#define RFCSR53_TX_POWER FIELD8(0x3f) -#define RFCSR53_UNKNOWN FIELD8(0xc0) - -#define RFCSR54_TX_POWER FIELD8(0x3f) -#define RFCSR54_UNKNOWN FIELD8(0xc0) - -#define RFCSR55_TX_POWER FIELD8(0x3f) -#define RFCSR55_UNKNOWN FIELD8(0xc0) - -#define RFCSR57_DRV_CC FIELD8(0xfc) - - -/* - * RF registers - */ - -/* - * RF 2 - */ -#define RF2_ANTENNA_RX2 FIELD32(0x00000040) -#define RF2_ANTENNA_TX1 FIELD32(0x00004000) -#define RF2_ANTENNA_RX1 FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TXPOWER_G FIELD32(0x00003e00) -#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) -#define RF3_TXPOWER_A FIELD32(0x00003c00) - -/* - * RF 4 - */ -#define RF4_TXPOWER_G FIELD32(0x000007c0) -#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) -#define RF4_TXPOWER_A FIELD32(0x00000780) -#define RF4_FREQ_OFFSET FIELD32(0x001f8000) -#define RF4_HT40 FIELD32(0x00200000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -enum rt2800_eeprom_word { - EEPROM_CHIP_ID = 0, - EEPROM_VERSION, - EEPROM_MAC_ADDR_0, - EEPROM_MAC_ADDR_1, - EEPROM_MAC_ADDR_2, - EEPROM_NIC_CONF0, - EEPROM_NIC_CONF1, - EEPROM_FREQ, - EEPROM_LED_AG_CONF, - EEPROM_LED_ACT_CONF, - EEPROM_LED_POLARITY, - EEPROM_NIC_CONF2, - EEPROM_LNA, - EEPROM_RSSI_BG, - EEPROM_RSSI_BG2, - EEPROM_TXMIXER_GAIN_BG, - EEPROM_RSSI_A, - EEPROM_RSSI_A2, - EEPROM_TXMIXER_GAIN_A, - EEPROM_EIRP_MAX_TX_POWER, - EEPROM_TXPOWER_DELTA, - EEPROM_TXPOWER_BG1, - EEPROM_TXPOWER_BG2, - EEPROM_TSSI_BOUND_BG1, - EEPROM_TSSI_BOUND_BG2, - EEPROM_TSSI_BOUND_BG3, - EEPROM_TSSI_BOUND_BG4, - EEPROM_TSSI_BOUND_BG5, - EEPROM_TXPOWER_A1, - EEPROM_TXPOWER_A2, - EEPROM_TSSI_BOUND_A1, - EEPROM_TSSI_BOUND_A2, - EEPROM_TSSI_BOUND_A3, - EEPROM_TSSI_BOUND_A4, - EEPROM_TSSI_BOUND_A5, - EEPROM_TXPOWER_BYRATE, - EEPROM_BBP_START, - - /* IDs for extended EEPROM format used by three-chain devices */ - EEPROM_EXT_LNA2, - EEPROM_EXT_TXPOWER_BG3, - EEPROM_EXT_TXPOWER_A3, - - /* New values must be added before this */ - EEPROM_WORD_COUNT -}; - -/* - * EEPROM Version - */ -#define EEPROM_VERSION_FAE FIELD16(0x00ff) -#define EEPROM_VERSION_VERSION FIELD16(0xff00) - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM NIC Configuration 0 - * RXPATH: 1: 1R, 2: 2R, 3: 3R - * TXPATH: 1: 1T, 2: 2T, 3: 3T - * RF_TYPE: RFIC type - */ -#define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f) -#define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0) -#define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00) - -/* - * EEPROM NIC Configuration 1 - * HW_RADIO: 0: disable, 1: enable - * EXTERNAL_TX_ALC: 0: disable, 1: enable - * EXTERNAL_LNA_2G: 0: disable, 1: enable - * EXTERNAL_LNA_5G: 0: disable, 1: enable - * CARDBUS_ACCEL: 0: enable, 1: disable - * BW40M_SB_2G: 0: disable, 1: enable - * BW40M_SB_5G: 0: disable, 1: enable - * WPS_PBC: 0: disable, 1: enable - * BW40M_2G: 0: enable, 1: disable - * BW40M_5G: 0: enable, 1: disable - * BROADBAND_EXT_LNA: 0: disable, 1: enable - * ANT_DIVERSITY: 00: Disable, 01: Diversity, - * 10: Main antenna, 11: Aux antenna - * INTERNAL_TX_ALC: 0: disable, 1: enable - * BT_COEXIST: 0: disable, 1: enable - * DAC_TEST: 0: disable, 1: enable - */ -#define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001) -#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002) -#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004) -#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008) -#define EEPROM_NIC_CONF1_CARDBUS_ACCEL FIELD16(0x0010) -#define EEPROM_NIC_CONF1_BW40M_SB_2G FIELD16(0x0020) -#define EEPROM_NIC_CONF1_BW40M_SB_5G FIELD16(0x0040) -#define EEPROM_NIC_CONF1_WPS_PBC FIELD16(0x0080) -#define EEPROM_NIC_CONF1_BW40M_2G FIELD16(0x0100) -#define EEPROM_NIC_CONF1_BW40M_5G FIELD16(0x0200) -#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400) -#define EEPROM_NIC_CONF1_ANT_DIVERSITY FIELD16(0x1800) -#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000) -#define EEPROM_NIC_CONF1_BT_COEXIST FIELD16(0x4000) -#define EEPROM_NIC_CONF1_DAC_TEST FIELD16(0x8000) - -/* - * EEPROM frequency - */ -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) -#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) - -/* - * EEPROM LED - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM NIC Configuration 2 - * RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream - * TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream - * CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved - */ -#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f) -#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0) -#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600) - -/* - * EEPROM LNA - */ -#define EEPROM_LNA_BG FIELD16(0x00ff) -#define EEPROM_LNA_A0 FIELD16(0xff00) - -/* - * EEPROM RSSI BG offset - */ -#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI BG2 offset - */ -#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) - -/* - * EEPROM TXMIXER GAIN BG offset (note overlaps with EEPROM RSSI BG2). - */ -#define EEPROM_TXMIXER_GAIN_BG_VAL FIELD16(0x0007) - -/* - * EEPROM RSSI A offset - */ -#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI A2 offset - */ -#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) - -/* - * EEPROM TXMIXER GAIN A offset (note overlaps with EEPROM RSSI A2). - */ -#define EEPROM_TXMIXER_GAIN_A_VAL FIELD16(0x0007) - -/* - * EEPROM EIRP Maximum TX power values(unit: dbm) - */ -#define EEPROM_EIRP_MAX_TX_POWER_2GHZ FIELD16(0x00ff) -#define EEPROM_EIRP_MAX_TX_POWER_5GHZ FIELD16(0xff00) - -/* - * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. - * This is delta in 40MHZ. - * VALUE: Tx Power dalta value, MAX=4(unit: dbm) - * TYPE: 1: Plus the delta value, 0: minus the delta value - * ENABLE: enable tx power compensation for 40BW - */ -#define EEPROM_TXPOWER_DELTA_VALUE_2G FIELD16(0x003f) -#define EEPROM_TXPOWER_DELTA_TYPE_2G FIELD16(0x0040) -#define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080) -#define EEPROM_TXPOWER_DELTA_VALUE_5G FIELD16(0x3f00) -#define EEPROM_TXPOWER_DELTA_TYPE_5G FIELD16(0x4000) -#define EEPROM_TXPOWER_DELTA_ENABLE_5G FIELD16(0x8000) - -/* - * EEPROM TXPOWER 802.11BG - */ -#define EEPROM_TXPOWER_BG_SIZE 7 -#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11BG - * MINUS4: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -4) - * MINUS3: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -3) - */ -#define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11BG - * MINUS2: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -2) - * MINUS1: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -1) - */ -#define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11BG - * REF: Reference TSSI value, no tx power changes needed - * PLUS1: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 1) - */ -#define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11BG - * PLUS2: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 2) - * PLUS3: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 3) - */ -#define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11BG - * PLUS4: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 4) - * AGC_STEP: Temperature compensation step. - */ -#define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A_SIZE 6 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* EEPROM_TXPOWER_{A,G} fields for RT3593 */ -#define EEPROM_TXPOWER_ALC FIELD8(0x1f) -#define EEPROM_TXPOWER_FINE_CTRL FIELD8(0xe0) - -/* - * EEPROM temperature compensation boundaries 802.11A - * MINUS4: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -4) - * MINUS3: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -3) - */ -#define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11A - * MINUS2: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -2) - * MINUS1: If the actual TSSI is below this boundary, tx power needs to be - * reduced by (agc_step * -1) - */ -#define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11A - * REF: Reference TSSI value, no tx power changes needed - * PLUS1: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 1) - */ -#define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11A - * PLUS2: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 2) - * PLUS3: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 3) - */ -#define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00) - -/* - * EEPROM temperature compensation boundaries 802.11A - * PLUS4: If the actual TSSI is above this boundary, tx power needs to be - * increased by (agc_step * 4) - * AGC_STEP: Temperature compensation step. - */ -#define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff) -#define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00) - -/* - * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode - */ -#define EEPROM_TXPOWER_BYRATE_SIZE 9 - -#define EEPROM_TXPOWER_BYRATE_RATE0 FIELD16(0x000f) -#define EEPROM_TXPOWER_BYRATE_RATE1 FIELD16(0x00f0) -#define EEPROM_TXPOWER_BYRATE_RATE2 FIELD16(0x0f00) -#define EEPROM_TXPOWER_BYRATE_RATE3 FIELD16(0xf000) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* EEPROM_EXT_LNA2 */ -#define EEPROM_EXT_LNA2_A1 FIELD16(0x00ff) -#define EEPROM_EXT_LNA2_A2 FIELD16(0xff00) - -/* - * EEPROM IQ Calibration, unlike other entries those are byte addresses. - */ - -#define EEPROM_IQ_GAIN_CAL_TX0_2G 0x130 -#define EEPROM_IQ_PHASE_CAL_TX0_2G 0x131 -#define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G 0x132 -#define EEPROM_IQ_GAIN_CAL_TX1_2G 0x133 -#define EEPROM_IQ_PHASE_CAL_TX1_2G 0x134 -#define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G 0x135 -#define EEPROM_IQ_GAIN_CAL_RX0_2G 0x136 -#define EEPROM_IQ_PHASE_CAL_RX0_2G 0x137 -#define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G 0x138 -#define EEPROM_IQ_GAIN_CAL_RX1_2G 0x139 -#define EEPROM_IQ_PHASE_CAL_RX1_2G 0x13A -#define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G 0x13B -#define EEPROM_RF_IQ_COMPENSATION_CONTROL 0x13C -#define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL 0x13D -#define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G 0x144 -#define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G 0x145 -#define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G 0X146 -#define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G 0x147 -#define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G 0x148 -#define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G 0x149 -#define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G 0x14A -#define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G 0x14B -#define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G 0X14C -#define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G 0x14D -#define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G 0x14E -#define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G 0x14F -#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G 0x150 -#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G 0x151 -#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G 0x152 -#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G 0x153 -#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G 0x154 -#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G 0x155 -#define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G 0x156 -#define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G 0x157 -#define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G 0X158 -#define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G 0x159 -#define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G 0x15A -#define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G 0x15B -#define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G 0x15C -#define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G 0x15D -#define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G 0X15E -#define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G 0x15F -#define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G 0x160 -#define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G 0x161 -#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G 0x162 -#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G 0x163 -#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G 0x164 -#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G 0x165 -#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G 0x166 -#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G 0x167 - -/* - * MCU mailbox commands. - * MCU_SLEEP - go to power-save mode. - * arg1: 1: save as much power as possible, 0: save less power. - * status: 1: success, 2: already asleep, - * 3: maybe MAC is busy so can't finish this task. - * MCU_RADIO_OFF - * arg0: 0: do power-saving, NOT turn off radio. - */ -#define MCU_SLEEP 0x30 -#define MCU_WAKEUP 0x31 -#define MCU_RADIO_OFF 0x35 -#define MCU_CURRENT 0x36 -#define MCU_LED 0x50 -#define MCU_LED_STRENGTH 0x51 -#define MCU_LED_AG_CONF 0x52 -#define MCU_LED_ACT_CONF 0x53 -#define MCU_LED_LED_POLARITY 0x54 -#define MCU_RADAR 0x60 -#define MCU_BOOT_SIGNAL 0x72 -#define MCU_ANT_SELECT 0X73 -#define MCU_FREQ_OFFSET 0x74 -#define MCU_BBP_SIGNAL 0x80 -#define MCU_POWER_SAVE 0x83 -#define MCU_BAND_SELECT 0x91 - -/* - * MCU mailbox tokens - */ -#define TOKEN_SLEEP 1 -#define TOKEN_RADIO_OFF 2 -#define TOKEN_WAKEUP 3 - - -/* - * DMA descriptor defines. - */ - -#define TXWI_DESC_SIZE_4WORDS (4 * sizeof(__le32)) -#define TXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32)) - -#define RXWI_DESC_SIZE_4WORDS (4 * sizeof(__le32)) -#define RXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32)) -#define RXWI_DESC_SIZE_6WORDS (6 * sizeof(__le32)) - -/* - * TX WI structure - */ - -/* - * Word0 - * FRAG: 1 To inform TKIP engine this is a fragment. - * MIMO_PS: The remote peer is in dynamic MIMO-PS mode - * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs - * BW: Channel bandwidth 0:20MHz, 1:40 MHz (for legacy rates this will - * duplicate the frame to both channels). - * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED - * AMPDU: 1: this frame is eligible for AMPDU aggregation, the hw will - * aggregate consecutive frames with the same RA and QoS TID. If - * a frame A with the same RA and QoS TID but AMPDU=0 is queued - * directly after a frame B with AMPDU=1, frame A might still - * get aggregated into the AMPDU started by frame B. So, setting - * AMPDU to 0 does _not_ necessarily mean the frame is sent as - * MPDU, it can still end up in an AMPDU if the previous frame - * was tagged as AMPDU. - */ -#define TXWI_W0_FRAG FIELD32(0x00000001) -#define TXWI_W0_MIMO_PS FIELD32(0x00000002) -#define TXWI_W0_CF_ACK FIELD32(0x00000004) -#define TXWI_W0_TS FIELD32(0x00000008) -#define TXWI_W0_AMPDU FIELD32(0x00000010) -#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) -#define TXWI_W0_TX_OP FIELD32(0x00000300) -#define TXWI_W0_MCS FIELD32(0x007f0000) -#define TXWI_W0_BW FIELD32(0x00800000) -#define TXWI_W0_SHORT_GI FIELD32(0x01000000) -#define TXWI_W0_STBC FIELD32(0x06000000) -#define TXWI_W0_IFS FIELD32(0x08000000) -#define TXWI_W0_PHYMODE FIELD32(0xc0000000) - -/* - * Word1 - * ACK: 0: No Ack needed, 1: Ack needed - * NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number - * BW_WIN_SIZE: BA windows size of the recipient - * WIRELESS_CLI_ID: Client ID for WCID table access - * MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame - * PACKETID: Will be latched into the TX_STA_FIFO register once the according - * frame was processed. If multiple frames are aggregated together - * (AMPDU==1) the reported tx status will always contain the packet - * id of the first frame. 0: Don't report tx status for this frame. - * PACKETID_QUEUE: Part of PACKETID, This is the queue index (0-3) - * PACKETID_ENTRY: Part of PACKETID, THis is the queue entry index (1-3) - * This identification number is calculated by ((idx % 3) + 1). - * The (+1) is required to prevent PACKETID to become 0. - */ -#define TXWI_W1_ACK FIELD32(0x00000001) -#define TXWI_W1_NSEQ FIELD32(0x00000002) -#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) -#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) -#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define TXWI_W1_PACKETID FIELD32(0xf0000000) -#define TXWI_W1_PACKETID_QUEUE FIELD32(0x30000000) -#define TXWI_W1_PACKETID_ENTRY FIELD32(0xc0000000) - -/* - * Word2 - */ -#define TXWI_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - */ -#define TXWI_W3_EIV FIELD32(0xffffffff) - -/* - * RX WI structure - */ - -/* - * Word0 - */ -#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) -#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) -#define RXWI_W0_BSSID FIELD32(0x00001c00) -#define RXWI_W0_UDF FIELD32(0x0000e000) -#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define RXWI_W0_TID FIELD32(0xf0000000) - -/* - * Word1 - */ -#define RXWI_W1_FRAG FIELD32(0x0000000f) -#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) -#define RXWI_W1_MCS FIELD32(0x007f0000) -#define RXWI_W1_BW FIELD32(0x00800000) -#define RXWI_W1_SHORT_GI FIELD32(0x01000000) -#define RXWI_W1_STBC FIELD32(0x06000000) -#define RXWI_W1_PHYMODE FIELD32(0xc0000000) - -/* - * Word2 - */ -#define RXWI_W2_RSSI0 FIELD32(0x000000ff) -#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) -#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) - -/* - * Word3 - */ -#define RXWI_W3_SNR0 FIELD32(0x000000ff) -#define RXWI_W3_SNR1 FIELD32(0x0000ff00) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_G_TXPOWER 0 -#define MIN_A_TXPOWER -7 -#define MAX_G_TXPOWER 31 -#define MAX_A_TXPOWER 15 -#define DEFAULT_TXPOWER 5 - -#define MIN_A_TXPOWER_3593 0 -#define MAX_A_TXPOWER_3593 31 - -#define TXPOWER_G_FROM_DEV(__txpower) \ - ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_A_FROM_DEV(__txpower) \ - ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -/* - * Board's maximun TX power limitation - */ -#define EIRP_MAX_TX_POWER_LIMIT 0x50 - -/* - * Number of TBTT intervals after which we have to adjust - * the hw beacon timer. - */ -#define BCN_TBTT_OFFSET 64 - -/* - * Hardware has 255 WCID table entries. First 32 entries are reserved for - * shared keys. Since parts of the pairwise key table might be shared with - * the beacon frame buffers 6 & 7 we could only use the first 222 entries. - */ -#define WCID_START 33 -#define WCID_END 222 -#define STA_IDS_SIZE (WCID_END - WCID_START + 2) - -/* - * RT2800 driver data structure - */ -struct rt2800_drv_data { - u8 calibration_bw20; - u8 calibration_bw40; - u8 bbp25; - u8 bbp26; - u8 txmixer_gain_24g; - u8 txmixer_gain_5g; - unsigned int tbtt_tick; - DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); -}; - -#endif /* RT2800_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c deleted file mode 100644 index 9733b31a780d..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ /dev/null @@ -1,8021 +0,0 @@ -/* - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> - Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com> - - Based on the original rt2800pci.c and rt2800usb.c. - Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> - Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> - Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> - Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2800lib - Abstract: rt2800 generic device routines. - */ - -#include <linux/crc-ccitt.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> - -#include "rt2x00.h" -#include "rt2800lib.h" -#include "rt2800.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2800_register_read and rt2800_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - * The _lock versions must be used if you already hold the csr_mutex - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RFCSR(__dev, __reg) \ - rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) -#define WAIT_FOR_MCU(__dev, __reg) \ - rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \ - H2M_MAILBOX_CSR_OWNER, (__reg)) - -static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev) -{ - /* check for rt2872 on SoC */ - if (!rt2x00_is_soc(rt2x00dev) || - !rt2x00_rt(rt2x00dev, RT2872)) - return false; - - /* we know for sure that these rf chipsets are used on rt305x boards */ - if (rt2x00_rf(rt2x00dev, RF3020) || - rt2x00_rf(rt2x00dev, RF3021) || - rt2x00_rf(rt2x00dev, RF3022)) - return true; - - rt2x00_warn(rt2x00dev, "Unknown RF chipset on rt305x\n"); - return false; -} - -static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); - rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); - - rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); - - rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); - - WAIT_FOR_RFCSR(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); - rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); - - rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = { - [EEPROM_CHIP_ID] = 0x0000, - [EEPROM_VERSION] = 0x0001, - [EEPROM_MAC_ADDR_0] = 0x0002, - [EEPROM_MAC_ADDR_1] = 0x0003, - [EEPROM_MAC_ADDR_2] = 0x0004, - [EEPROM_NIC_CONF0] = 0x001a, - [EEPROM_NIC_CONF1] = 0x001b, - [EEPROM_FREQ] = 0x001d, - [EEPROM_LED_AG_CONF] = 0x001e, - [EEPROM_LED_ACT_CONF] = 0x001f, - [EEPROM_LED_POLARITY] = 0x0020, - [EEPROM_NIC_CONF2] = 0x0021, - [EEPROM_LNA] = 0x0022, - [EEPROM_RSSI_BG] = 0x0023, - [EEPROM_RSSI_BG2] = 0x0024, - [EEPROM_TXMIXER_GAIN_BG] = 0x0024, /* overlaps with RSSI_BG2 */ - [EEPROM_RSSI_A] = 0x0025, - [EEPROM_RSSI_A2] = 0x0026, - [EEPROM_TXMIXER_GAIN_A] = 0x0026, /* overlaps with RSSI_A2 */ - [EEPROM_EIRP_MAX_TX_POWER] = 0x0027, - [EEPROM_TXPOWER_DELTA] = 0x0028, - [EEPROM_TXPOWER_BG1] = 0x0029, - [EEPROM_TXPOWER_BG2] = 0x0030, - [EEPROM_TSSI_BOUND_BG1] = 0x0037, - [EEPROM_TSSI_BOUND_BG2] = 0x0038, - [EEPROM_TSSI_BOUND_BG3] = 0x0039, - [EEPROM_TSSI_BOUND_BG4] = 0x003a, - [EEPROM_TSSI_BOUND_BG5] = 0x003b, - [EEPROM_TXPOWER_A1] = 0x003c, - [EEPROM_TXPOWER_A2] = 0x0053, - [EEPROM_TSSI_BOUND_A1] = 0x006a, - [EEPROM_TSSI_BOUND_A2] = 0x006b, - [EEPROM_TSSI_BOUND_A3] = 0x006c, - [EEPROM_TSSI_BOUND_A4] = 0x006d, - [EEPROM_TSSI_BOUND_A5] = 0x006e, - [EEPROM_TXPOWER_BYRATE] = 0x006f, - [EEPROM_BBP_START] = 0x0078, -}; - -static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = { - [EEPROM_CHIP_ID] = 0x0000, - [EEPROM_VERSION] = 0x0001, - [EEPROM_MAC_ADDR_0] = 0x0002, - [EEPROM_MAC_ADDR_1] = 0x0003, - [EEPROM_MAC_ADDR_2] = 0x0004, - [EEPROM_NIC_CONF0] = 0x001a, - [EEPROM_NIC_CONF1] = 0x001b, - [EEPROM_NIC_CONF2] = 0x001c, - [EEPROM_EIRP_MAX_TX_POWER] = 0x0020, - [EEPROM_FREQ] = 0x0022, - [EEPROM_LED_AG_CONF] = 0x0023, - [EEPROM_LED_ACT_CONF] = 0x0024, - [EEPROM_LED_POLARITY] = 0x0025, - [EEPROM_LNA] = 0x0026, - [EEPROM_EXT_LNA2] = 0x0027, - [EEPROM_RSSI_BG] = 0x0028, - [EEPROM_RSSI_BG2] = 0x0029, - [EEPROM_RSSI_A] = 0x002a, - [EEPROM_RSSI_A2] = 0x002b, - [EEPROM_TXPOWER_BG1] = 0x0030, - [EEPROM_TXPOWER_BG2] = 0x0037, - [EEPROM_EXT_TXPOWER_BG3] = 0x003e, - [EEPROM_TSSI_BOUND_BG1] = 0x0045, - [EEPROM_TSSI_BOUND_BG2] = 0x0046, - [EEPROM_TSSI_BOUND_BG3] = 0x0047, - [EEPROM_TSSI_BOUND_BG4] = 0x0048, - [EEPROM_TSSI_BOUND_BG5] = 0x0049, - [EEPROM_TXPOWER_A1] = 0x004b, - [EEPROM_TXPOWER_A2] = 0x0065, - [EEPROM_EXT_TXPOWER_A3] = 0x007f, - [EEPROM_TSSI_BOUND_A1] = 0x009a, - [EEPROM_TSSI_BOUND_A2] = 0x009b, - [EEPROM_TSSI_BOUND_A3] = 0x009c, - [EEPROM_TSSI_BOUND_A4] = 0x009d, - [EEPROM_TSSI_BOUND_A5] = 0x009e, - [EEPROM_TXPOWER_BYRATE] = 0x00a0, -}; - -static unsigned int rt2800_eeprom_word_index(struct rt2x00_dev *rt2x00dev, - const enum rt2800_eeprom_word word) -{ - const unsigned int *map; - unsigned int index; - - if (WARN_ONCE(word >= EEPROM_WORD_COUNT, - "%s: invalid EEPROM word %d\n", - wiphy_name(rt2x00dev->hw->wiphy), word)) - return 0; - - if (rt2x00_rt(rt2x00dev, RT3593)) - map = rt2800_eeprom_map_ext; - else - map = rt2800_eeprom_map; - - index = map[word]; - - /* Index 0 is valid only for EEPROM_CHIP_ID. - * Otherwise it means that the offset of the - * given word is not initialized in the map, - * or that the field is not usable on the - * actual chipset. - */ - WARN_ONCE(word != EEPROM_CHIP_ID && index == 0, - "%s: invalid access of EEPROM word %d\n", - wiphy_name(rt2x00dev->hw->wiphy), word); - - return index; -} - -static void *rt2800_eeprom_addr(struct rt2x00_dev *rt2x00dev, - const enum rt2800_eeprom_word word) -{ - unsigned int index; - - index = rt2800_eeprom_word_index(rt2x00dev, word); - return rt2x00_eeprom_addr(rt2x00dev, index); -} - -static void rt2800_eeprom_read(struct rt2x00_dev *rt2x00dev, - const enum rt2800_eeprom_word word, u16 *data) -{ - unsigned int index; - - index = rt2800_eeprom_word_index(rt2x00dev, word); - rt2x00_eeprom_read(rt2x00dev, index, data); -} - -static void rt2800_eeprom_write(struct rt2x00_dev *rt2x00dev, - const enum rt2800_eeprom_word word, u16 data) -{ - unsigned int index; - - index = rt2800_eeprom_word_index(rt2x00dev, word); - rt2x00_eeprom_write(rt2x00dev, index, data); -} - -static void rt2800_eeprom_read_from_array(struct rt2x00_dev *rt2x00dev, - const enum rt2800_eeprom_word array, - unsigned int offset, - u16 *data) -{ - unsigned int index; - - index = rt2800_eeprom_word_index(rt2x00dev, array); - rt2x00_eeprom_read(rt2x00dev, index + offset, data); -} - -static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - int i, count; - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - if (rt2x00_get_field32(reg, WLAN_EN)) - return 0; - - rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); - rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); - rt2x00_set_field32(®, WLAN_CLK_EN, 0); - rt2x00_set_field32(®, WLAN_EN, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - - udelay(REGISTER_BUSY_DELAY); - - count = 0; - do { - /* - * Check PLL_LD & XTAL_RDY. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, CMB_CTRL, ®); - if (rt2x00_get_field32(reg, PLL_LD) && - rt2x00_get_field32(reg, XTAL_RDY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - if (i >= REGISTER_BUSY_COUNT) { - - if (count >= 10) - return -EIO; - - rt2800_register_write(rt2x00dev, 0x58, 0x018); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x418); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x618); - udelay(REGISTER_BUSY_DELAY); - count++; - } else { - count = 0; - } - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); - rt2x00_set_field32(®, WLAN_CLK_EN, 1); - rt2x00_set_field32(®, WLAN_RESET, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2x00_set_field32(®, WLAN_RESET, 0); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); - } while (count != 0); - - return 0; -} - -void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1) -{ - u32 reg; - - /* - * SOC devices don't support MCU requests. - */ - if (rt2x00_is_soc(rt2x00dev)) - return; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the MCU becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_MCU(rt2x00dev, ®)) { - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); - - reg = 0; - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} -EXPORT_SYMBOL_GPL(rt2800_mcu_request); - -int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i = 0; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - return 0; - msleep(1); - } - - rt2x00_err(rt2x00dev, "Unstable hardware\n"); - return -EBUSY; -} -EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready); - -int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - /* - * Some devices are really slow to respond here. Wait a whole second - * before timing out. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && - !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) - return 0; - - msleep(10); - } - - rt2x00_err(rt2x00dev, "WPDMA TX/RX busy [0x%08x]\n", reg); - return -EACCES; -} -EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready); - -void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); -} -EXPORT_SYMBOL_GPL(rt2800_disable_wpdma); - -void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev, - unsigned short *txwi_size, - unsigned short *rxwi_size) -{ - switch (rt2x00dev->chip.rt) { - case RT3593: - *txwi_size = TXWI_DESC_SIZE_4WORDS; - *rxwi_size = RXWI_DESC_SIZE_5WORDS; - break; - - case RT5592: - *txwi_size = TXWI_DESC_SIZE_5WORDS; - *rxwi_size = RXWI_DESC_SIZE_6WORDS; - break; - - default: - *txwi_size = TXWI_DESC_SIZE_4WORDS; - *rxwi_size = RXWI_DESC_SIZE_4WORDS; - break; - } -} -EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size); - -static bool rt2800_check_firmware_crc(const u8 *data, const size_t len) -{ - u16 fw_crc; - u16 crc; - - /* - * The last 2 bytes in the firmware array are the crc checksum itself, - * this means that we should never pass those 2 bytes to the crc - * algorithm. - */ - fw_crc = (data[len - 2] << 8 | data[len - 1]); - - /* - * Use the crc ccitt algorithm. - * This will return the same value as the legacy driver which - * used bit ordering reversion on the both the firmware bytes - * before input input as well as on the final output. - * Obviously using crc ccitt directly is much more efficient. - */ - crc = crc_ccitt(~0, data, len - 2); - - /* - * There is a small difference between the crc-itu-t + bitrev and - * the crc-ccitt crc calculation. In the latter method the 2 bytes - * will be swapped, use swab16 to convert the crc to the correct - * value. - */ - crc = swab16(crc); - - return fw_crc == crc; -} - -int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - size_t offset = 0; - size_t fw_len; - bool multiple; - - /* - * PCI(e) & SOC devices require firmware with a length - * of 8kb. USB devices require firmware files with a length - * of 4kb. Certain USB chipsets however require different firmware, - * which Ralink only provides attached to the original firmware - * file. Thus for USB devices, firmware files have a length - * which is a multiple of 4kb. The firmware for rt3290 chip also - * have a length which is a multiple of 4kb. - */ - if (rt2x00_is_usb(rt2x00dev) || rt2x00_rt(rt2x00dev, RT3290)) - fw_len = 4096; - else - fw_len = 8192; - - multiple = true; - /* - * Validate the firmware length - */ - if (len != fw_len && (!multiple || (len % fw_len) != 0)) - return FW_BAD_LENGTH; - - /* - * Check if the chipset requires one of the upper parts - * of the firmware. - */ - if (rt2x00_is_usb(rt2x00dev) && - !rt2x00_rt(rt2x00dev, RT2860) && - !rt2x00_rt(rt2x00dev, RT2872) && - !rt2x00_rt(rt2x00dev, RT3070) && - ((len / fw_len) == 1)) - return FW_BAD_VERSION; - - /* - * 8kb firmware files must be checked as if it were - * 2 separate firmware files. - */ - while (offset < len) { - if (!rt2800_check_firmware_crc(data + offset, fw_len)) - return FW_BAD_CRC; - - offset += fw_len; - } - - return FW_OK; -} -EXPORT_SYMBOL_GPL(rt2800_check_firmware); - -int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - unsigned int i; - u32 reg; - int retval; - - if (rt2x00_rt(rt2x00dev, RT3290)) { - retval = rt2800_enable_wlan_rt3290(rt2x00dev); - if (retval) - return -EBUSY; - } - - /* - * If driver doesn't wake up firmware here, - * rt2800_load_firmware will hang forever when interface is up again. - */ - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); - - /* - * Wait for stable hardware. - */ - if (rt2800_wait_csr_ready(rt2x00dev)) - return -EBUSY; - - if (rt2x00_is_pci(rt2x00dev)) { - if (rt2x00_rt(rt2x00dev, RT3290) || - rt2x00_rt(rt2x00dev, RT3572) || - rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392)) { - rt2800_register_read(rt2x00dev, AUX_CTRL, ®); - rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1); - rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1); - rt2800_register_write(rt2x00dev, AUX_CTRL, reg); - } - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); - } - - rt2800_disable_wpdma(rt2x00dev); - - /* - * Write firmware to the device. - */ - rt2800_drv_write_firmware(rt2x00dev, data, len); - - /* - * Wait for device to stabilize. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); - if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - rt2x00_err(rt2x00dev, "PBF system register not ready\n"); - return -EBUSY; - } - - /* - * Disable DMA, will be reenabled later when enabling - * the radio. - */ - rt2800_disable_wpdma(rt2x00dev); - - /* - * Initialize firmware. - */ - rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - if (rt2x00_is_usb(rt2x00dev)) { - rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0); - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); - } - msleep(1); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_load_firmware); - -void rt2800_write_tx_data(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - __le32 *txwi = rt2800_drv_get_txwi(entry); - u32 word; - int i; - - /* - * Initialize TX Info descriptor - */ - rt2x00_desc_read(txwi, 0, &word); - rt2x00_set_field32(&word, TXWI_W0_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, - test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); - rt2x00_set_field32(&word, TXWI_W0_TS, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_AMPDU, - test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, - txdesc->u.ht.mpdu_density); - rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->u.ht.txop); - rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->u.ht.mcs); - rt2x00_set_field32(&word, TXWI_W0_BW, - test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, - test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->u.ht.stbc); - rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); - rt2x00_desc_write(txwi, 0, word); - - rt2x00_desc_read(txwi, 1, &word); - rt2x00_set_field32(&word, TXWI_W1_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W1_NSEQ, - test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->u.ht.ba_size); - rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, - test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? - txdesc->key_idx : txdesc->u.ht.wcid); - rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, - txdesc->length); - rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid); - rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1); - rt2x00_desc_write(txwi, 1, word); - - /* - * Always write 0 to IV/EIV fields (word 2 and 3), hardware will insert - * the IV from the IVEIV register when TXD_W3_WIV is set to 0. - * When TXD_W3_WIV is set to 1 it will use the IV data - * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which - * crypto entry in the registers should be used to encrypt the frame. - * - * Nulify all remaining words as well, we don't know how to program them. - */ - for (i = 2; i < entry->queue->winfo_size / sizeof(__le32); i++) - _rt2x00_desc_write(txwi, i, 0); -} -EXPORT_SYMBOL_GPL(rt2800_write_tx_data); - -static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2) -{ - s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0); - s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1); - s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2); - u16 eeprom; - u8 offset0; - u8 offset1; - u8 offset2; - - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom); - offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0); - offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1); - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2); - } else { - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &eeprom); - offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0); - offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1); - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2); - } - - /* - * Convert the value from the descriptor into the RSSI value - * If the value in the descriptor is 0, it is considered invalid - * and the default (extremely low) rssi value is assumed - */ - rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128; - rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128; - rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128; - - /* - * mac80211 only accepts a single RSSI value. Calculating the - * average doesn't deliver a fair answer either since -60:-60 would - * be considered equally good as -50:-70 while the second is the one - * which gives less energy... - */ - rssi0 = max(rssi0, rssi1); - return (int)max(rssi0, rssi2); -} - -void rt2800_process_rxwi(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - __le32 *rxwi = (__le32 *) entry->skb->data; - u32 word; - - rt2x00_desc_read(rxwi, 0, &word); - - rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF); - rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); - - rt2x00_desc_read(rxwi, 1, &word); - - if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI)) - rxdesc->flags |= RX_FLAG_SHORT_GI; - - if (rt2x00_get_field32(word, RXWI_W1_BW)) - rxdesc->flags |= RX_FLAG_40MHZ; - - /* - * Detect RX rate, always use MCS as signal type. - */ - rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; - rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS); - rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE); - - /* - * Mask of 0x8 bit to remove the short preamble flag. - */ - if (rxdesc->rate_mode == RATE_MODE_CCK) - rxdesc->signal &= ~0x8; - - rt2x00_desc_read(rxwi, 2, &word); - - /* - * Convert descriptor AGC value to RSSI value. - */ - rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word); - /* - * Remove RXWI descriptor from start of the buffer. - */ - skb_pull(entry->skb, entry->queue->winfo_size); -} -EXPORT_SYMBOL_GPL(rt2800_process_rxwi); - -void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct txdone_entry_desc txdesc; - u32 word; - u16 mcs, real_mcs; - int aggr, ampdu; - - /* - * Obtain the status about this packet. - */ - txdesc.flags = 0; - rt2x00_desc_read(txwi, 0, &word); - - mcs = rt2x00_get_field32(word, TXWI_W0_MCS); - ampdu = rt2x00_get_field32(word, TXWI_W0_AMPDU); - - real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS); - aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE); - - /* - * If a frame was meant to be sent as a single non-aggregated MPDU - * but ended up in an aggregate the used tx rate doesn't correlate - * with the one specified in the TXWI as the whole aggregate is sent - * with the same rate. - * - * For example: two frames are sent to rt2x00, the first one sets - * AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0 - * and requests MCS15. If the hw aggregates both frames into one - * AMDPU the tx status for both frames will contain MCS7 although - * the frame was sent successfully. - * - * Hence, replace the requested rate with the real tx rate to not - * confuse the rate control algortihm by providing clearly wrong - * data. - */ - if (unlikely(aggr == 1 && ampdu == 0 && real_mcs != mcs)) { - skbdesc->tx_rate_idx = real_mcs; - mcs = real_mcs; - } - - if (aggr == 1 || ampdu == 1) - __set_bit(TXDONE_AMPDU, &txdesc.flags); - - /* - * Ralink has a retry mechanism using a global fallback - * table. We setup this fallback table to try the immediate - * lower rate for all rates. In the TX_STA_FIFO, the MCS field - * always contains the MCS used for the last transmission, be - * it successful or not. - */ - if (rt2x00_get_field32(status, TX_STA_FIFO_TX_SUCCESS)) { - /* - * Transmission succeeded. The number of retries is - * mcs - real_mcs - */ - __set_bit(TXDONE_SUCCESS, &txdesc.flags); - txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0); - } else { - /* - * Transmission failed. The number of retries is - * always 7 in this case (for a total number of 8 - * frames sent). - */ - __set_bit(TXDONE_FAILURE, &txdesc.flags); - txdesc.retry = rt2x00dev->long_retry; - } - - /* - * the frame was retried at least once - * -> hw used fallback rates - */ - if (txdesc.retry) - __set_bit(TXDONE_FALLBACK, &txdesc.flags); - - rt2x00lib_txdone(entry, &txdesc); -} -EXPORT_SYMBOL_GPL(rt2800_txdone_entry); - -static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev, - unsigned int index) -{ - return HW_BEACON_BASE(index); -} - -static inline u8 rt2800_get_beacon_offset(struct rt2x00_dev *rt2x00dev, - unsigned int index) -{ - return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev, index)); -} - -static void rt2800_update_beacons_setup(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue = rt2x00dev->bcn; - struct queue_entry *entry; - int i, bcn_num = 0; - u64 off, reg = 0; - u32 bssid_dw1; - - /* - * Setup offsets of all active beacons in BCN_OFFSET{0,1} registers. - */ - for (i = 0; i < queue->limit; i++) { - entry = &queue->entries[i]; - if (!test_bit(ENTRY_BCN_ENABLED, &entry->flags)) - continue; - off = rt2800_get_beacon_offset(rt2x00dev, entry->entry_idx); - reg |= off << (8 * bcn_num); - bcn_num++; - } - - WARN_ON_ONCE(bcn_num != rt2x00dev->intf_beaconing); - - rt2800_register_write(rt2x00dev, BCN_OFFSET0, (u32) reg); - rt2800_register_write(rt2x00dev, BCN_OFFSET1, (u32) (reg >> 32)); - - /* - * H/W sends up to MAC_BSSID_DW1_BSS_BCN_NUM + 1 consecutive beacons. - */ - rt2800_register_read(rt2x00dev, MAC_BSSID_DW1, &bssid_dw1); - rt2x00_set_field32(&bssid_dw1, MAC_BSSID_DW1_BSS_BCN_NUM, - bcn_num > 0 ? bcn_num - 1 : 0); - rt2800_register_write(rt2x00dev, MAC_BSSID_DW1, bssid_dw1); -} - -void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - unsigned int beacon_base; - unsigned int padding_len; - u32 orig_reg, reg; - const int txwi_desc_size = entry->queue->winfo_size; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - orig_reg = reg; - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - /* - * Add space for the TXWI in front of the skb. - */ - memset(skb_push(entry->skb, txwi_desc_size), 0, txwi_desc_size); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->flags |= SKBDESC_DESC_IN_SKB; - skbdesc->desc = entry->skb->data; - skbdesc->desc_len = txwi_desc_size; - - /* - * Add the TXWI for the beacon to the skb. - */ - rt2800_write_tx_data(entry, txdesc); - - /* - * Dump beacon to userspace through debugfs. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - - /* - * Write entire beacon with TXWI and padding to register. - */ - padding_len = roundup(entry->skb->len, 4) - entry->skb->len; - if (padding_len && skb_pad(entry->skb, padding_len)) { - rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n"); - /* skb freed by skb_pad() on failure */ - entry->skb = NULL; - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg); - return; - } - - beacon_base = rt2800_hw_beacon_base(rt2x00dev, entry->entry_idx); - - rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data, - entry->skb->len + padding_len); - __set_bit(ENTRY_BCN_ENABLED, &entry->flags); - - /* - * Change global beacons settings. - */ - rt2800_update_beacons_setup(rt2x00dev); - - /* - * Restore beaconing state. - */ - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg); - - /* - * Clean up beacon skb. - */ - dev_kfree_skb_any(entry->skb); - entry->skb = NULL; -} -EXPORT_SYMBOL_GPL(rt2800_write_beacon); - -static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev, - unsigned int index) -{ - int i; - const int txwi_desc_size = rt2x00dev->bcn->winfo_size; - unsigned int beacon_base; - - beacon_base = rt2800_hw_beacon_base(rt2x00dev, index); - - /* - * For the Beacon base registers we only need to clear - * the whole TXWI which (when set to 0) will invalidate - * the entire beacon. - */ - for (i = 0; i < txwi_desc_size; i += sizeof(__le32)) - rt2800_register_write(rt2x00dev, beacon_base + i, 0); -} - -void rt2800_clear_beacon(struct queue_entry *entry) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - u32 orig_reg, reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &orig_reg); - reg = orig_reg; - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - /* - * Clear beacon. - */ - rt2800_clear_beacon_register(rt2x00dev, entry->entry_idx); - __clear_bit(ENTRY_BCN_ENABLED, &entry->flags); - - /* - * Change global beacons settings. - */ - rt2800_update_beacons_setup(rt2x00dev); - /* - * Restore beaconing state. - */ - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg); -} -EXPORT_SYMBOL_GPL(rt2800_clear_beacon); - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -const struct rt2x00debug rt2800_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2800_register_read, - .write = rt2800_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - /* NOTE: The local EEPROM access functions can't - * be used here, use the generic versions instead. - */ - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2800_bbp_read, - .write = rt2800_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2800_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, - .rfcsr = { - .read = rt2800_rfcsr_read, - .write = rt2800_rfcsr_write, - .word_base = RFCSR_BASE, - .word_size = sizeof(u8), - .word_count = RFCSR_SIZE / sizeof(u8), - }, -}; -EXPORT_SYMBOL_GPL(rt2800_rt2x00debug); -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - if (rt2x00_rt(rt2x00dev, RT3290)) { - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0); - } else { - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - return rt2x00_get_field32(reg, GPIO_CTRL_VAL2); - } -} -EXPORT_SYMBOL_GPL(rt2800_rfkill_poll); - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2800_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - unsigned int polarity = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_POLARITY); - unsigned int ledmode = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_MODE); - u32 reg; - - /* Check for SoC (SOC devices don't support MCU requests) */ - if (rt2x00_is_soc(led->rt2x00dev)) { - rt2800_register_read(led->rt2x00dev, LED_CFG, ®); - - /* Set LED Polarity */ - rt2x00_set_field32(®, LED_CFG_LED_POLAR, polarity); - - /* Set LED Mode */ - if (led->type == LED_TYPE_RADIO) { - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, - enabled ? 3 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, - enabled ? 3 : 0); - } else if (led->type == LED_TYPE_QUALITY) { - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, - enabled ? 3 : 0); - } - - rt2800_register_write(led->rt2x00dev, LED_CFG, reg); - - } else { - if (led->type == LED_TYPE_RADIO) { - rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? 0x20 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * The specs tell us the following levels: - * 0, 1 ,3, 7, 15, 31 - * to determine the level in a simple way we can simply - * work with bitshifting: - * (1 << level) - 1 - */ - rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - (1 << brightness / (LED_FULL / 6)) - 1, - polarity); - } - } -} - -static void rt2800_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2800_brightness_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2800_config_wcid(struct rt2x00_dev *rt2x00dev, - const u8 *address, - int wcid) -{ - struct mac_wcid_entry wcid_entry; - u32 offset; - - offset = MAC_WCID_ENTRY(wcid); - - memset(&wcid_entry, 0xff, sizeof(wcid_entry)); - if (address) - memcpy(wcid_entry.mac, address, ETH_ALEN); - - rt2800_register_multiwrite(rt2x00dev, offset, - &wcid_entry, sizeof(wcid_entry)); -} - -static void rt2800_delete_wcid_attr(struct rt2x00_dev *rt2x00dev, int wcid) -{ - u32 offset; - offset = MAC_WCID_ATTR_ENTRY(wcid); - rt2800_register_write(rt2x00dev, offset, 0); -} - -static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev *rt2x00dev, - int wcid, u32 bssidx) -{ - u32 offset = MAC_WCID_ATTR_ENTRY(wcid); - u32 reg; - - /* - * The BSS Idx numbers is split in a main value of 3 bits, - * and a extended field for adding one additional bit to the value. - */ - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, (bssidx & 0x7)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT, - (bssidx & 0x8) >> 3); - rt2800_register_write(rt2x00dev, offset, reg); -} - -static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct mac_iveiv_entry iveiv_entry; - u32 offset; - u32 reg; - - offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); - - if (crypto->cmd == SET_KEY) { - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); - /* - * Both the cipher as the BSS Idx numbers are split in a main - * value of 3 bits, and a extended field for adding one additional - * bit to the value. - */ - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, - (crypto->cipher & 0x7)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER_EXT, - (crypto->cipher & 0x8) >> 3); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2800_register_write(rt2x00dev, offset, reg); - } else { - /* Delete the cipher without touching the bssidx */ - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, 0); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, 0); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER_EXT, 0); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); - rt2800_register_write(rt2x00dev, offset, reg); - } - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - - memset(&iveiv_entry, 0, sizeof(iveiv_entry)); - if ((crypto->cipher == CIPHER_TKIP) || - (crypto->cipher == CIPHER_TKIP_NO_MIC) || - (crypto->cipher == CIPHER_AES)) - iveiv_entry.iv[3] |= 0x20; - iveiv_entry.iv[3] |= key->keyidx << 6; - rt2800_register_multiwrite(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); -} - -int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - u32 offset; - u32 reg; - - if (crypto->cmd == SET_KEY) { - key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = SHARED_KEY_ENTRY(key->hw_key_idx); - rt2800_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * The cipher types are stored over multiple registers - * starting with SHARED_KEY_MODE_BASE each word will have - * 32 bits and contains the cipher types for 2 bssidx each. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - - offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2800_register_write(rt2x00dev, offset, reg); - - /* - * Update WCID information - */ - rt2800_config_wcid(rt2x00dev, crypto->address, key->hw_key_idx); - rt2800_config_wcid_attr_bssidx(rt2x00dev, key->hw_key_idx, - crypto->bssidx); - rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_config_shared_key); - -int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - u32 offset; - - if (crypto->cmd == SET_KEY) { - /* - * Allow key configuration only for STAs that are - * known by the hw. - */ - if (crypto->wcid > WCID_END) - return -ENOSPC; - key->hw_key_idx = crypto->wcid; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - rt2800_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * Update WCID information - */ - rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key); - -int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - int wcid; - struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta); - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - - /* - * Search for the first free WCID entry and return the corresponding - * index. - */ - wcid = find_first_zero_bit(drv_data->sta_ids, STA_IDS_SIZE) + WCID_START; - - /* - * Store selected wcid even if it is invalid so that we can - * later decide if the STA is uploaded into the hw. - */ - sta_priv->wcid = wcid; - - /* - * No space left in the device, however, we can still communicate - * with the STA -> No error. - */ - if (wcid > WCID_END) - return 0; - - __set_bit(wcid - WCID_START, drv_data->sta_ids); - - /* - * Clean up WCID attributes and write STA address to the device. - */ - rt2800_delete_wcid_attr(rt2x00dev, wcid); - rt2800_config_wcid(rt2x00dev, sta->addr, wcid); - rt2800_config_wcid_attr_bssidx(rt2x00dev, wcid, - rt2x00lib_get_bssidx(rt2x00dev, vif)); - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_sta_add); - -int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, int wcid) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - - if (wcid > WCID_END) - return 0; - /* - * Remove WCID entry, no need to clean the attributes as they will - * get renewed when the WCID is reused. - */ - rt2800_config_wcid(rt2x00dev, NULL, wcid); - __clear_bit(wcid - WCID_START, drv_data->sta_ids); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_sta_remove); - -void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, - !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, - !(filter_flags & FIF_CONTROL)); - rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); -} -EXPORT_SYMBOL_GPL(rt2800_config_filter); - -void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, const unsigned int flags) -{ - u32 reg; - bool update_bssid = false; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Enable synchronisation. - */ - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - if (conf->sync == TSF_SYNC_AP_NONE) { - /* - * Tune beacon queue transmit parameters for AP mode - */ - rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, ®); - rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 0); - rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 1); - rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32); - rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 0); - rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg); - } else { - rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, ®); - rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 4); - rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 2); - rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32); - rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 16); - rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg); - } - } - - if (flags & CONFIG_UPDATE_MAC) { - if (flags & CONFIG_UPDATE_TYPE && - conf->sync == TSF_SYNC_AP_NONE) { - /* - * The BSSID register has to be set to our own mac - * address in AP mode. - */ - memcpy(conf->bssid, conf->mac, sizeof(conf->mac)); - update_bssid = true; - } - - if (!is_zero_ether_addr((const u8 *)conf->mac)) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - } - - rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, - conf->mac, sizeof(conf->mac)); - } - - if ((flags & CONFIG_UPDATE_BSSID) || update_bssid) { - if (!is_zero_ether_addr((const u8 *)conf->bssid)) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 3); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); - conf->bssid[1] = cpu_to_le32(reg); - } - - rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, - conf->bssid, sizeof(conf->bssid)); - } -} -EXPORT_SYMBOL_GPL(rt2800_config_intf); - -static void rt2800_config_ht_opmode(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) -{ - bool any_sta_nongf = !!(erp->ht_opmode & - IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); - u8 protection = erp->ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION; - u8 mm20_mode, mm40_mode, gf20_mode, gf40_mode; - u16 mm20_rate, mm40_rate, gf20_rate, gf40_rate; - u32 reg; - - /* default protection rate for HT20: OFDM 24M */ - mm20_rate = gf20_rate = 0x4004; - - /* default protection rate for HT40: duplicate OFDM 24M */ - mm40_rate = gf40_rate = 0x4084; - - switch (protection) { - case IEEE80211_HT_OP_MODE_PROTECTION_NONE: - /* - * All STAs in this BSS are HT20/40 but there might be - * STAs not supporting greenfield mode. - * => Disable protection for HT transmissions. - */ - mm20_mode = mm40_mode = gf20_mode = gf40_mode = 0; - - break; - case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: - /* - * All STAs in this BSS are HT20 or HT20/40 but there - * might be STAs not supporting greenfield mode. - * => Protect all HT40 transmissions. - */ - mm20_mode = gf20_mode = 0; - mm40_mode = gf40_mode = 2; - - break; - case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: - /* - * Nonmember protection: - * According to 802.11n we _should_ protect all - * HT transmissions (but we don't have to). - * - * But if cts_protection is enabled we _shall_ protect - * all HT transmissions using a CCK rate. - * - * And if any station is non GF we _shall_ protect - * GF transmissions. - * - * We decide to protect everything - * -> fall through to mixed mode. - */ - case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: - /* - * Legacy STAs are present - * => Protect all HT transmissions. - */ - mm20_mode = mm40_mode = gf20_mode = gf40_mode = 2; - - /* - * If erp protection is needed we have to protect HT - * transmissions with CCK 11M long preamble. - */ - if (erp->cts_protection) { - /* don't duplicate RTS/CTS in CCK mode */ - mm20_rate = mm40_rate = 0x0003; - gf20_rate = gf40_rate = 0x0003; - } - break; - } - - /* check for STAs not supporting greenfield mode */ - if (any_sta_nongf) - gf20_mode = gf40_mode = 2; - - /* Update HT protection config */ - rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, mm20_rate); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, mm20_mode); - rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, mm40_rate); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, mm40_mode); - rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, gf20_rate); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, gf20_mode); - rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, gf40_rate); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, gf40_mode); - rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); -} - -void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp, - u32 changed) -{ - u32 reg; - - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - } - - if (changed & BSS_CHANGED_ERP_CTS_PROT) { - rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - } - - if (changed & BSS_CHANGED_BASIC_RATES) { - rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - } - - if (changed & BSS_CHANGED_ERP_SLOT) { - rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, - erp->slot_time); - rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - } - - if (changed & BSS_CHANGED_BEACON_INT) { - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - - if (changed & BSS_CHANGED_HT) - rt2800_config_ht_opmode(rt2x00dev, erp); -} -EXPORT_SYMBOL_GPL(rt2800_config_erp); - -static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 eeprom; - u8 led_ctrl, led_g_mode, led_r_mode; - - rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - rt2x00_set_field32(®, GPIO_SWITCH_0, 1); - rt2x00_set_field32(®, GPIO_SWITCH_1, 1); - } else { - rt2x00_set_field32(®, GPIO_SWITCH_0, 0); - rt2x00_set_field32(®, GPIO_SWITCH_1, 0); - } - rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); - - rt2800_register_read(rt2x00dev, LED_CFG, ®); - led_g_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 3 : 0; - led_r_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 0 : 3; - if (led_g_mode != rt2x00_get_field32(reg, LED_CFG_G_LED_MODE) || - led_r_mode != rt2x00_get_field32(reg, LED_CFG_R_LED_MODE)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - led_ctrl = rt2x00_get_field16(eeprom, EEPROM_FREQ_LED_MODE); - if (led_ctrl == 0 || led_ctrl > 0x40) { - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, led_g_mode); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, led_r_mode); - rt2800_register_write(rt2x00dev, LED_CFG, reg); - } else { - rt2800_mcu_request(rt2x00dev, MCU_BAND_SELECT, 0xff, - (led_g_mode << 2) | led_r_mode, 1); - } - } -} - -static void rt2800_set_ant_diversity(struct rt2x00_dev *rt2x00dev, - enum antenna ant) -{ - u32 reg; - u8 eesk_pin = (ant == ANTENNA_A) ? 1 : 0; - u8 gpio_bit3 = (ant == ANTENNA_A) ? 0 : 1; - - if (rt2x00_is_pci(rt2x00dev)) { - rt2800_register_read(rt2x00dev, E2PROM_CSR, ®); - rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, eesk_pin); - rt2800_register_write(rt2x00dev, E2PROM_CSR, reg); - } else if (rt2x00_is_usb(rt2x00dev)) - rt2800_mcu_request(rt2x00dev, MCU_ANT_SELECT, 0xff, - eesk_pin, 0); - - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0); - rt2x00_set_field32(®, GPIO_CTRL_VAL3, gpio_bit3); - rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); -} - -void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) -{ - u8 r1; - u8 r3; - u16 eeprom; - - rt2800_bbp_read(rt2x00dev, 1, &r1); - rt2800_bbp_read(rt2x00dev, 3, &r3); - - if (rt2x00_rt(rt2x00dev, RT3572) && - rt2x00_has_cap_bt_coexist(rt2x00dev)) - rt2800_config_3572bt_ant(rt2x00dev); - - /* - * Configure the TX antenna. - */ - switch (ant->tx_chain_num) { - case 1: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - break; - case 2: - if (rt2x00_rt(rt2x00dev, RT3572) && - rt2x00_has_cap_bt_coexist(rt2x00dev)) - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1); - else - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - case 3: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (ant->rx_chain_num) { - case 1: - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3090) || - rt2x00_rt(rt2x00dev, RT3352) || - rt2x00_rt(rt2x00dev, RT3390)) { - rt2800_eeprom_read(rt2x00dev, - EEPROM_NIC_CONF1, &eeprom); - if (rt2x00_get_field16(eeprom, - EEPROM_NIC_CONF1_ANT_DIVERSITY)) - rt2800_set_ant_diversity(rt2x00dev, - rt2x00dev->default_ant.rx); - } - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - if (rt2x00_rt(rt2x00dev, RT3572) && - rt2x00_has_cap_bt_coexist(rt2x00dev)) { - rt2x00_set_field8(&r3, BBP3_RX_ADC, 1); - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, - rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); - rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B); - } else { - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); - } - break; - case 3: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); - break; - } - - rt2800_bbp_write(rt2x00dev, 3, r3); - rt2800_bbp_write(rt2x00dev, 1, r1); - - if (rt2x00_rt(rt2x00dev, RT3593)) { - if (ant->rx_chain_num == 1) - rt2800_bbp_write(rt2x00dev, 86, 0x00); - else - rt2800_bbp_write(rt2x00dev, 86, 0x46); - } -} -EXPORT_SYMBOL_GPL(rt2800_config_ant); - -static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain; - - if (libconf->rf.channel <= 14) { - rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); - } else if (libconf->rf.channel <= 64) { - rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { - if (rt2x00_rt(rt2x00dev, RT3593)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, - EEPROM_EXT_LNA2_A1); - } else { - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, - EEPROM_RSSI_BG2_LNA_A1); - } - } else { - if (rt2x00_rt(rt2x00dev, RT3593)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, - EEPROM_EXT_LNA2_A2); - } else { - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, - EEPROM_RSSI_A2_LNA_A2); - } - } - - rt2x00dev->lna_gain = lna_gain; -} - -#define FREQ_OFFSET_BOUND 0x5f - -static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) -{ - u8 freq_offset, prev_freq_offset; - u8 rfcsr, prev_rfcsr; - - freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE); - freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND); - - rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); - prev_rfcsr = rfcsr; - - rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset); - if (rfcsr == prev_rfcsr) - return; - - if (rt2x00_is_usb(rt2x00dev)) { - rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff, - freq_offset, prev_rfcsr); - return; - } - - prev_freq_offset = rt2x00_get_field8(prev_rfcsr, RFCSR17_CODE); - while (prev_freq_offset != freq_offset) { - if (prev_freq_offset < freq_offset) - prev_freq_offset++; - else - prev_freq_offset--; - - rt2x00_set_field8(&rfcsr, RFCSR17_CODE, prev_freq_offset); - rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); - - usleep_range(1000, 1500); - } -} - -static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - if (rt2x00dev->default_ant.tx_chain_num == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); - - if (rt2x00dev->default_ant.rx_chain_num == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - } else if (rt2x00dev->default_ant.rx_chain_num == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - - if (rf->channel > 14) { - /* - * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minimum value is -7). - * However this means that values between 0 and 7 have - * double meaning, and we should set a 7DBm boost flag. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->default_power1 >= 0)); - - if (info->default_power1 < 0) - info->default_power1 += 7; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1); - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->default_power2 >= 0)); - - if (info->default_power2 < 0) - info->default_power2 += 7; - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2); - } - - rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u8 rfcsr, calib_tx, calib_rx; - - rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); - - rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR3_K, rf->rf3); - rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2); - rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1); - rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2); - rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, - rt2x00dev->default_ant.rx_chain_num <= 1); - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, - rt2x00dev->default_ant.rx_chain_num <= 2); - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, - rt2x00dev->default_ant.tx_chain_num <= 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, - rt2x00dev->default_ant.tx_chain_num <= 2); - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); - - if (rt2x00_rt(rt2x00dev, RT3390)) { - calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f; - calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f; - } else { - if (conf_is_ht40(conf)) { - calib_tx = drv_data->calibration_bw40; - calib_rx = drv_data->calibration_bw40; - } else { - calib_tx = drv_data->calibration_bw20; - calib_rx = drv_data->calibration_bw20; - } - } - - rt2800_rfcsr_read(rt2x00dev, 24, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR24_TX_CALIB, calib_tx); - rt2800_rfcsr_write(rt2x00dev, 24, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR31_RX_CALIB, calib_rx); - rt2800_rfcsr_write(rt2x00dev, 31, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); -} - -static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u8 rfcsr; - u32 reg; - - if (rf->channel <= 14) { - rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25); - rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26); - } else { - rt2800_bbp_write(rt2x00dev, 25, 0x09); - rt2800_bbp_write(rt2x00dev, 26, 0xff); - } - - rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3); - - rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2); - if (rf->channel <= 14) - rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 2); - else - rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 1); - rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 5, &rfcsr); - if (rf->channel <= 14) - rt2x00_set_field8(&rfcsr, RFCSR5_R1, 1); - else - rt2x00_set_field8(&rfcsr, RFCSR5_R1, 2); - rt2800_rfcsr_write(rt2x00dev, 5, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); - if (rf->channel <= 14) { - rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - info->default_power1); - } else { - rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - (info->default_power1 & 0x3) | - ((info->default_power1 & 0xC) << 1)); - } - rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr); - if (rf->channel <= 14) { - rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3); - rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, - info->default_power2); - } else { - rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7); - rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, - (info->default_power2 & 0x3) | - ((info->default_power2 & 0xC) << 1)); - } - rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); - if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { - if (rf->channel <= 14) { - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); - } - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); - } else { - switch (rt2x00dev->default_ant.tx_chain_num) { - case 1: - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); - case 2: - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); - break; - } - - switch (rt2x00dev->default_ant.rx_chain_num) { - case 1: - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); - case 2: - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); - break; - } - } - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); - - if (conf_is_ht40(conf)) { - rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40); - rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40); - } else { - rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20); - rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20); - } - - if (rf->channel <= 14) { - rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); - rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); - rt2800_rfcsr_write(rt2x00dev, 15, 0x53); - rfcsr = 0x4c; - rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN, - drv_data->txmixer_gain_24g); - rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); - rt2800_rfcsr_write(rt2x00dev, 17, 0x23); - rt2800_rfcsr_write(rt2x00dev, 19, 0x93); - rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 25, 0x15); - rt2800_rfcsr_write(rt2x00dev, 26, 0x85); - rt2800_rfcsr_write(rt2x00dev, 27, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); - } else { - rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_BIT2, 1); - rt2x00_set_field8(&rfcsr, RFCSR7_BIT3, 0); - rt2x00_set_field8(&rfcsr, RFCSR7_BIT4, 1); - rt2x00_set_field8(&rfcsr, RFCSR7_BITS67, 0); - rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); - rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 11, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x43); - rfcsr = 0x7a; - rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN, - drv_data->txmixer_gain_5g); - rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); - rt2800_rfcsr_write(rt2x00dev, 17, 0x23); - if (rf->channel <= 64) { - rt2800_rfcsr_write(rt2x00dev, 19, 0xb7); - rt2800_rfcsr_write(rt2x00dev, 20, 0xf6); - rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); - } else if (rf->channel <= 128) { - rt2800_rfcsr_write(rt2x00dev, 19, 0x74); - rt2800_rfcsr_write(rt2x00dev, 20, 0xf4); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); - } else { - rt2800_rfcsr_write(rt2x00dev, 19, 0x72); - rt2800_rfcsr_write(rt2x00dev, 20, 0xf3); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); - } - rt2800_rfcsr_write(rt2x00dev, 26, 0x87); - rt2800_rfcsr_write(rt2x00dev, 27, 0x01); - rt2800_rfcsr_write(rt2x00dev, 29, 0x9f); - } - - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0); - if (rf->channel <= 14) - rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1); - else - rt2x00_set_field32(®, GPIO_CTRL_VAL7, 0); - rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); - - rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); -} - -static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u8 txrx_agc_fc; - u8 txrx_h20m; - u8 rfcsr; - u8 bbp; - const bool txbf_enabled = false; /* TODO */ - - /* TODO: use TX{0,1,2}FinePowerControl values from EEPROM */ - rt2800_bbp_read(rt2x00dev, 109, &bbp); - rt2x00_set_field8(&bbp, BBP109_TX0_POWER, 0); - rt2x00_set_field8(&bbp, BBP109_TX1_POWER, 0); - rt2800_bbp_write(rt2x00dev, 109, bbp); - - rt2800_bbp_read(rt2x00dev, 110, &bbp); - rt2x00_set_field8(&bbp, BBP110_TX2_POWER, 0); - rt2800_bbp_write(rt2x00dev, 110, bbp); - - if (rf->channel <= 14) { - /* Restore BBP 25 & 26 for 2.4 GHz */ - rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25); - rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26); - } else { - /* Hard code BBP 25 & 26 for 5GHz */ - - /* Enable IQ Phase correction */ - rt2800_bbp_write(rt2x00dev, 25, 0x09); - /* Setup IQ Phase correction value */ - rt2800_bbp_write(rt2x00dev, 26, 0xff); - } - - rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3 & 0xf); - - rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR11_R, (rf->rf2 & 0x3)); - rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR11_PLL_IDOH, 1); - if (rf->channel <= 14) - rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 1); - else - rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 2); - rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 53, &rfcsr); - if (rf->channel <= 14) { - rfcsr = 0; - rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER, - info->default_power1 & 0x1f); - } else { - if (rt2x00_is_usb(rt2x00dev)) - rfcsr = 0x40; - - rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER, - ((info->default_power1 & 0x18) << 1) | - (info->default_power1 & 7)); - } - rt2800_rfcsr_write(rt2x00dev, 53, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 55, &rfcsr); - if (rf->channel <= 14) { - rfcsr = 0; - rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER, - info->default_power2 & 0x1f); - } else { - if (rt2x00_is_usb(rt2x00dev)) - rfcsr = 0x40; - - rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER, - ((info->default_power2 & 0x18) << 1) | - (info->default_power2 & 7)); - } - rt2800_rfcsr_write(rt2x00dev, 55, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 54, &rfcsr); - if (rf->channel <= 14) { - rfcsr = 0; - rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER, - info->default_power3 & 0x1f); - } else { - if (rt2x00_is_usb(rt2x00dev)) - rfcsr = 0x40; - - rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER, - ((info->default_power3 & 0x18) << 1) | - (info->default_power3 & 7)); - } - rt2800_rfcsr_write(rt2x00dev, 54, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); - - switch (rt2x00dev->default_ant.tx_chain_num) { - case 3: - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); - /* fallthrough */ - case 2: - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); - /* fallthrough */ - case 1: - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); - break; - } - - switch (rt2x00dev->default_ant.rx_chain_num) { - case 3: - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); - /* fallthrough */ - case 2: - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); - /* fallthrough */ - case 1: - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); - break; - } - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - - rt2800_adjust_freq_offset(rt2x00dev); - - if (conf_is_ht40(conf)) { - txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, - RFCSR24_TX_AGC_FC); - txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw40, - RFCSR24_TX_H20M); - } else { - txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw20, - RFCSR24_TX_AGC_FC); - txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw20, - RFCSR24_TX_H20M); - } - - /* NOTE: the reference driver does not writes the new value - * back to RFCSR 32 - */ - rt2800_rfcsr_read(rt2x00dev, 32, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR32_TX_AGC_FC, txrx_agc_fc); - - if (rf->channel <= 14) - rfcsr = 0xa0; - else - rfcsr = 0x80; - rt2800_rfcsr_write(rt2x00dev, 31, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, txrx_h20m); - rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, txrx_h20m); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - - /* Band selection */ - rt2800_rfcsr_read(rt2x00dev, 36, &rfcsr); - if (rf->channel <= 14) - rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1); - else - rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0); - rt2800_rfcsr_write(rt2x00dev, 36, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 34, &rfcsr); - if (rf->channel <= 14) - rfcsr = 0x3c; - else - rfcsr = 0x20; - rt2800_rfcsr_write(rt2x00dev, 34, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); - if (rf->channel <= 14) - rfcsr = 0x1a; - else - rfcsr = 0x12; - rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - if (rf->channel >= 1 && rf->channel <= 14) - rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1); - else if (rf->channel >= 36 && rf->channel <= 64) - rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2); - else if (rf->channel >= 100 && rf->channel <= 128) - rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2); - else - rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1); - rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - - rt2800_rfcsr_write(rt2x00dev, 46, 0x60); - - if (rf->channel <= 14) { - rt2800_rfcsr_write(rt2x00dev, 10, 0xd3); - rt2800_rfcsr_write(rt2x00dev, 13, 0x12); - } else { - rt2800_rfcsr_write(rt2x00dev, 10, 0xd8); - rt2800_rfcsr_write(rt2x00dev, 13, 0x23); - } - - rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR51_BITS01, 1); - rt2800_rfcsr_write(rt2x00dev, 51, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr); - if (rf->channel <= 14) { - rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 5); - rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 3); - } else { - rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 4); - rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 2); - } - rt2800_rfcsr_write(rt2x00dev, 51, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr); - if (rf->channel <= 14) - rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 3); - else - rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 2); - - if (txbf_enabled) - rt2x00_set_field8(&rfcsr, RFCSR49_TX_DIV, 1); - - rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO1_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 57, &rfcsr); - if (rf->channel <= 14) - rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x1b); - else - rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 57, rfcsr); - - if (rf->channel <= 14) { - rt2800_rfcsr_write(rt2x00dev, 44, 0x93); - rt2800_rfcsr_write(rt2x00dev, 52, 0x45); - } else { - rt2800_rfcsr_write(rt2x00dev, 44, 0x9b); - rt2800_rfcsr_write(rt2x00dev, 52, 0x05); - } - - /* Initiate VCO calibration */ - rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); - if (rf->channel <= 14) { - rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); - } else { - rt2x00_set_field8(&rfcsr, RFCSR3_BIT1, 1); - rt2x00_set_field8(&rfcsr, RFCSR3_BIT2, 1); - rt2x00_set_field8(&rfcsr, RFCSR3_BIT3, 1); - rt2x00_set_field8(&rfcsr, RFCSR3_BIT4, 1); - rt2x00_set_field8(&rfcsr, RFCSR3_BIT5, 1); - rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); - } - rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); - - if (rf->channel >= 1 && rf->channel <= 14) { - rfcsr = 0x23; - if (txbf_enabled) - rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); - rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); - - rt2800_rfcsr_write(rt2x00dev, 45, 0xbb); - } else if (rf->channel >= 36 && rf->channel <= 64) { - rfcsr = 0x36; - if (txbf_enabled) - rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); - rt2800_rfcsr_write(rt2x00dev, 39, 0x36); - - rt2800_rfcsr_write(rt2x00dev, 45, 0xeb); - } else if (rf->channel >= 100 && rf->channel <= 128) { - rfcsr = 0x32; - if (txbf_enabled) - rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); - rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); - - rt2800_rfcsr_write(rt2x00dev, 45, 0xb3); - } else { - rfcsr = 0x30; - if (txbf_enabled) - rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1); - rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); - - rt2800_rfcsr_write(rt2x00dev, 45, 0x9b); - } -} - -#define POWER_BOUND 0x27 -#define POWER_BOUND_5G 0x2b - -static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); - rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2); - rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr); - if (info->default_power1 > POWER_BOUND) - rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND); - else - rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); - rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); - - rt2800_adjust_freq_offset(rt2x00dev); - - if (rf->channel <= 14) { - if (rf->channel == 6) - rt2800_bbp_write(rt2x00dev, 68, 0x0c); - else - rt2800_bbp_write(rt2x00dev, 68, 0x0b); - - if (rf->channel >= 1 && rf->channel <= 6) - rt2800_bbp_write(rt2x00dev, 59, 0x0f); - else if (rf->channel >= 7 && rf->channel <= 11) - rt2800_bbp_write(rt2x00dev, 59, 0x0e); - else if (rf->channel >= 12 && rf->channel <= 14) - rt2800_bbp_write(rt2x00dev, 59, 0x0d); - } -} - -static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); - - rt2800_rfcsr_write(rt2x00dev, 11, 0x42); - rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); - rt2800_rfcsr_write(rt2x00dev, 13, 0x00); - - if (info->default_power1 > POWER_BOUND) - rt2800_rfcsr_write(rt2x00dev, 47, POWER_BOUND); - else - rt2800_rfcsr_write(rt2x00dev, 47, info->default_power1); - - if (info->default_power2 > POWER_BOUND) - rt2800_rfcsr_write(rt2x00dev, 48, POWER_BOUND); - else - rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2); - - rt2800_adjust_freq_offset(rt2x00dev); - - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); - - if ( rt2x00dev->default_ant.tx_chain_num == 2 ) - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); - else - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); - - if ( rt2x00dev->default_ant.rx_chain_num == 2 ) - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); - else - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); - - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); - - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - - rt2800_rfcsr_write(rt2x00dev, 31, 80); -} - -static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); - rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2); - rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr); - if (info->default_power1 > POWER_BOUND) - rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND); - else - rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); - rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); - - if (rt2x00_rt(rt2x00dev, RT5392)) { - rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr); - if (info->default_power2 > POWER_BOUND) - rt2x00_set_field8(&rfcsr, RFCSR50_TX, POWER_BOUND); - else - rt2x00_set_field8(&rfcsr, RFCSR50_TX, - info->default_power2); - rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); - } - - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - if (rt2x00_rt(rt2x00dev, RT5392)) { - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); - } - rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - - rt2800_adjust_freq_offset(rt2x00dev); - - if (rf->channel <= 14) { - int idx = rf->channel-1; - - if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { - /* r55/r59 value array of channel 1~14 */ - static const char r55_bt_rev[] = {0x83, 0x83, - 0x83, 0x73, 0x73, 0x63, 0x53, 0x53, - 0x53, 0x43, 0x43, 0x43, 0x43, 0x43}; - static const char r59_bt_rev[] = {0x0e, 0x0e, - 0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09, - 0x07, 0x07, 0x07, 0x07, 0x07, 0x07}; - - rt2800_rfcsr_write(rt2x00dev, 55, - r55_bt_rev[idx]); - rt2800_rfcsr_write(rt2x00dev, 59, - r59_bt_rev[idx]); - } else { - static const char r59_bt[] = {0x8b, 0x8b, 0x8b, - 0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89, - 0x88, 0x88, 0x86, 0x85, 0x84}; - - rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]); - } - } else { - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { - static const char r55_nonbt_rev[] = {0x23, 0x23, - 0x23, 0x23, 0x13, 0x13, 0x03, 0x03, - 0x03, 0x03, 0x03, 0x03, 0x03, 0x03}; - static const char r59_nonbt_rev[] = {0x07, 0x07, - 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, - 0x07, 0x07, 0x06, 0x05, 0x04, 0x04}; - - rt2800_rfcsr_write(rt2x00dev, 55, - r55_nonbt_rev[idx]); - rt2800_rfcsr_write(rt2x00dev, 59, - r59_nonbt_rev[idx]); - } else if (rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392)) { - static const char r59_non_bt[] = {0x8f, 0x8f, - 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d, - 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86}; - - rt2800_rfcsr_write(rt2x00dev, 59, - r59_non_bt[idx]); - } - } - } -} - -static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr, ep_reg; - u32 reg; - int power_bound; - - /* TODO */ - const bool is_11b = false; - const bool is_type_ep = false; - - rt2800_register_read(rt2x00dev, LDO_CFG0, ®); - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, - (rf->channel > 14 || conf_is_ht40(conf)) ? 5 : 0); - rt2800_register_write(rt2x00dev, LDO_CFG0, reg); - - /* Order of values on rf_channel entry: N, K, mod, R */ - rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1 & 0xff); - - rt2800_rfcsr_read(rt2x00dev, 9, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR9_K, rf->rf2 & 0xf); - rt2x00_set_field8(&rfcsr, RFCSR9_N, (rf->rf1 & 0x100) >> 8); - rt2x00_set_field8(&rfcsr, RFCSR9_MOD, ((rf->rf3 - 8) & 0x4) >> 2); - rt2800_rfcsr_write(rt2x00dev, 9, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf4 - 1); - rt2x00_set_field8(&rfcsr, RFCSR11_MOD, (rf->rf3 - 8) & 0x3); - rt2800_rfcsr_write(rt2x00dev, 11, rfcsr); - - if (rf->channel <= 14) { - rt2800_rfcsr_write(rt2x00dev, 10, 0x90); - /* FIXME: RF11 owerwrite ? */ - rt2800_rfcsr_write(rt2x00dev, 11, 0x4A); - rt2800_rfcsr_write(rt2x00dev, 12, 0x52); - rt2800_rfcsr_write(rt2x00dev, 13, 0x42); - rt2800_rfcsr_write(rt2x00dev, 22, 0x40); - rt2800_rfcsr_write(rt2x00dev, 24, 0x4A); - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - rt2800_rfcsr_write(rt2x00dev, 27, 0x42); - rt2800_rfcsr_write(rt2x00dev, 36, 0x80); - rt2800_rfcsr_write(rt2x00dev, 37, 0x08); - rt2800_rfcsr_write(rt2x00dev, 38, 0x89); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1B); - rt2800_rfcsr_write(rt2x00dev, 40, 0x0D); - rt2800_rfcsr_write(rt2x00dev, 41, 0x9B); - rt2800_rfcsr_write(rt2x00dev, 42, 0xD5); - rt2800_rfcsr_write(rt2x00dev, 43, 0x72); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0E); - rt2800_rfcsr_write(rt2x00dev, 45, 0xA2); - rt2800_rfcsr_write(rt2x00dev, 46, 0x6B); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 51, 0x3E); - rt2800_rfcsr_write(rt2x00dev, 52, 0x48); - rt2800_rfcsr_write(rt2x00dev, 54, 0x38); - rt2800_rfcsr_write(rt2x00dev, 56, 0xA1); - rt2800_rfcsr_write(rt2x00dev, 57, 0x00); - rt2800_rfcsr_write(rt2x00dev, 58, 0x39); - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - rt2800_rfcsr_write(rt2x00dev, 61, 0x91); - rt2800_rfcsr_write(rt2x00dev, 62, 0x39); - - /* TODO RF27 <- tssi */ - - rfcsr = rf->channel <= 10 ? 0x07 : 0x06; - rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); - rt2800_rfcsr_write(rt2x00dev, 59, rfcsr); - - if (is_11b) { - /* CCK */ - rt2800_rfcsr_write(rt2x00dev, 31, 0xF8); - rt2800_rfcsr_write(rt2x00dev, 32, 0xC0); - if (is_type_ep) - rt2800_rfcsr_write(rt2x00dev, 55, 0x06); - else - rt2800_rfcsr_write(rt2x00dev, 55, 0x47); - } else { - /* OFDM */ - if (is_type_ep) - rt2800_rfcsr_write(rt2x00dev, 55, 0x03); - else - rt2800_rfcsr_write(rt2x00dev, 55, 0x43); - } - - power_bound = POWER_BOUND; - ep_reg = 0x2; - } else { - rt2800_rfcsr_write(rt2x00dev, 10, 0x97); - /* FIMXE: RF11 overwrite */ - rt2800_rfcsr_write(rt2x00dev, 11, 0x40); - rt2800_rfcsr_write(rt2x00dev, 25, 0xBF); - rt2800_rfcsr_write(rt2x00dev, 27, 0x42); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 37, 0x04); - rt2800_rfcsr_write(rt2x00dev, 38, 0x85); - rt2800_rfcsr_write(rt2x00dev, 40, 0x42); - rt2800_rfcsr_write(rt2x00dev, 41, 0xBB); - rt2800_rfcsr_write(rt2x00dev, 42, 0xD7); - rt2800_rfcsr_write(rt2x00dev, 45, 0x41); - rt2800_rfcsr_write(rt2x00dev, 48, 0x00); - rt2800_rfcsr_write(rt2x00dev, 57, 0x77); - rt2800_rfcsr_write(rt2x00dev, 60, 0x05); - rt2800_rfcsr_write(rt2x00dev, 61, 0x01); - - /* TODO RF27 <- tssi */ - - if (rf->channel >= 36 && rf->channel <= 64) { - - rt2800_rfcsr_write(rt2x00dev, 12, 0x2E); - rt2800_rfcsr_write(rt2x00dev, 13, 0x22); - rt2800_rfcsr_write(rt2x00dev, 22, 0x60); - rt2800_rfcsr_write(rt2x00dev, 23, 0x7F); - if (rf->channel <= 50) - rt2800_rfcsr_write(rt2x00dev, 24, 0x09); - else if (rf->channel >= 52) - rt2800_rfcsr_write(rt2x00dev, 24, 0x07); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1C); - rt2800_rfcsr_write(rt2x00dev, 43, 0x5B); - rt2800_rfcsr_write(rt2x00dev, 44, 0X40); - rt2800_rfcsr_write(rt2x00dev, 46, 0X00); - rt2800_rfcsr_write(rt2x00dev, 51, 0xFE); - rt2800_rfcsr_write(rt2x00dev, 52, 0x0C); - rt2800_rfcsr_write(rt2x00dev, 54, 0xF8); - if (rf->channel <= 50) { - rt2800_rfcsr_write(rt2x00dev, 55, 0x06), - rt2800_rfcsr_write(rt2x00dev, 56, 0xD3); - } else if (rf->channel >= 52) { - rt2800_rfcsr_write(rt2x00dev, 55, 0x04); - rt2800_rfcsr_write(rt2x00dev, 56, 0xBB); - } - - rt2800_rfcsr_write(rt2x00dev, 58, 0x15); - rt2800_rfcsr_write(rt2x00dev, 59, 0x7F); - rt2800_rfcsr_write(rt2x00dev, 62, 0x15); - - } else if (rf->channel >= 100 && rf->channel <= 165) { - - rt2800_rfcsr_write(rt2x00dev, 12, 0x0E); - rt2800_rfcsr_write(rt2x00dev, 13, 0x42); - rt2800_rfcsr_write(rt2x00dev, 22, 0x40); - if (rf->channel <= 153) { - rt2800_rfcsr_write(rt2x00dev, 23, 0x3C); - rt2800_rfcsr_write(rt2x00dev, 24, 0x06); - } else if (rf->channel >= 155) { - rt2800_rfcsr_write(rt2x00dev, 23, 0x38); - rt2800_rfcsr_write(rt2x00dev, 24, 0x05); - } - if (rf->channel <= 138) { - rt2800_rfcsr_write(rt2x00dev, 39, 0x1A); - rt2800_rfcsr_write(rt2x00dev, 43, 0x3B); - rt2800_rfcsr_write(rt2x00dev, 44, 0x20); - rt2800_rfcsr_write(rt2x00dev, 46, 0x18); - } else if (rf->channel >= 140) { - rt2800_rfcsr_write(rt2x00dev, 39, 0x18); - rt2800_rfcsr_write(rt2x00dev, 43, 0x1B); - rt2800_rfcsr_write(rt2x00dev, 44, 0x10); - rt2800_rfcsr_write(rt2x00dev, 46, 0X08); - } - if (rf->channel <= 124) - rt2800_rfcsr_write(rt2x00dev, 51, 0xFC); - else if (rf->channel >= 126) - rt2800_rfcsr_write(rt2x00dev, 51, 0xEC); - if (rf->channel <= 138) - rt2800_rfcsr_write(rt2x00dev, 52, 0x06); - else if (rf->channel >= 140) - rt2800_rfcsr_write(rt2x00dev, 52, 0x06); - rt2800_rfcsr_write(rt2x00dev, 54, 0xEB); - if (rf->channel <= 138) - rt2800_rfcsr_write(rt2x00dev, 55, 0x01); - else if (rf->channel >= 140) - rt2800_rfcsr_write(rt2x00dev, 55, 0x00); - if (rf->channel <= 128) - rt2800_rfcsr_write(rt2x00dev, 56, 0xBB); - else if (rf->channel >= 130) - rt2800_rfcsr_write(rt2x00dev, 56, 0xAB); - if (rf->channel <= 116) - rt2800_rfcsr_write(rt2x00dev, 58, 0x1D); - else if (rf->channel >= 118) - rt2800_rfcsr_write(rt2x00dev, 58, 0x15); - if (rf->channel <= 138) - rt2800_rfcsr_write(rt2x00dev, 59, 0x3F); - else if (rf->channel >= 140) - rt2800_rfcsr_write(rt2x00dev, 59, 0x7C); - if (rf->channel <= 116) - rt2800_rfcsr_write(rt2x00dev, 62, 0x1D); - else if (rf->channel >= 118) - rt2800_rfcsr_write(rt2x00dev, 62, 0x15); - } - - power_bound = POWER_BOUND_5G; - ep_reg = 0x3; - } - - rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr); - if (info->default_power1 > power_bound) - rt2x00_set_field8(&rfcsr, RFCSR49_TX, power_bound); - else - rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); - if (is_type_ep) - rt2x00_set_field8(&rfcsr, RFCSR49_EP, ep_reg); - rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr); - if (info->default_power2 > power_bound) - rt2x00_set_field8(&rfcsr, RFCSR50_TX, power_bound); - else - rt2x00_set_field8(&rfcsr, RFCSR50_TX, info->default_power2); - if (is_type_ep) - rt2x00_set_field8(&rfcsr, RFCSR50_EP, ep_reg); - rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); - - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, - rt2x00dev->default_ant.tx_chain_num >= 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, - rt2x00dev->default_ant.tx_chain_num == 2); - rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); - - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, - rt2x00dev->default_ant.rx_chain_num >= 1); - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, - rt2x00dev->default_ant.rx_chain_num == 2); - rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); - - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - rt2800_rfcsr_write(rt2x00dev, 6, 0xe4); - - if (conf_is_ht40(conf)) - rt2800_rfcsr_write(rt2x00dev, 30, 0x16); - else - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - - if (!is_11b) { - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - } - - /* TODO proper frequency adjustment */ - rt2800_adjust_freq_offset(rt2x00dev); - - /* TODO merge with others */ - rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); - rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); - - /* BBP settings */ - rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - - rt2800_bbp_write(rt2x00dev, 79, (rf->channel <= 14) ? 0x1C : 0x18); - rt2800_bbp_write(rt2x00dev, 80, (rf->channel <= 14) ? 0x0E : 0x08); - rt2800_bbp_write(rt2x00dev, 81, (rf->channel <= 14) ? 0x3A : 0x38); - rt2800_bbp_write(rt2x00dev, 82, (rf->channel <= 14) ? 0x62 : 0x92); - - /* GLRT band configuration */ - rt2800_bbp_write(rt2x00dev, 195, 128); - rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0xE0 : 0xF0); - rt2800_bbp_write(rt2x00dev, 195, 129); - rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x1F : 0x1E); - rt2800_bbp_write(rt2x00dev, 195, 130); - rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x38 : 0x28); - rt2800_bbp_write(rt2x00dev, 195, 131); - rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x32 : 0x20); - rt2800_bbp_write(rt2x00dev, 195, 133); - rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x28 : 0x7F); - rt2800_bbp_write(rt2x00dev, 195, 124); - rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F); -} - -static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, - const unsigned int word, - const u8 value) -{ - u8 chain, reg; - - for (chain = 0; chain < rt2x00dev->default_ant.rx_chain_num; chain++) { - rt2800_bbp_read(rt2x00dev, 27, ®); - rt2x00_set_field8(®, BBP27_RX_CHAIN_SEL, chain); - rt2800_bbp_write(rt2x00dev, 27, reg); - - rt2800_bbp_write(rt2x00dev, word, value); - } -} - -static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel) -{ - u8 cal; - - /* TX0 IQ Gain */ - rt2800_bbp_write(rt2x00dev, 158, 0x2c); - if (channel <= 14) - cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G); - else if (channel >= 36 && channel <= 64) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G); - else if (channel >= 100 && channel <= 138) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G); - else if (channel >= 140 && channel <= 165) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G); - else - cal = 0; - rt2800_bbp_write(rt2x00dev, 159, cal); - - /* TX0 IQ Phase */ - rt2800_bbp_write(rt2x00dev, 158, 0x2d); - if (channel <= 14) - cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G); - else if (channel >= 36 && channel <= 64) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G); - else if (channel >= 100 && channel <= 138) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G); - else if (channel >= 140 && channel <= 165) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G); - else - cal = 0; - rt2800_bbp_write(rt2x00dev, 159, cal); - - /* TX1 IQ Gain */ - rt2800_bbp_write(rt2x00dev, 158, 0x4a); - if (channel <= 14) - cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G); - else if (channel >= 36 && channel <= 64) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G); - else if (channel >= 100 && channel <= 138) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G); - else if (channel >= 140 && channel <= 165) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G); - else - cal = 0; - rt2800_bbp_write(rt2x00dev, 159, cal); - - /* TX1 IQ Phase */ - rt2800_bbp_write(rt2x00dev, 158, 0x4b); - if (channel <= 14) - cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G); - else if (channel >= 36 && channel <= 64) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G); - else if (channel >= 100 && channel <= 138) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G); - else if (channel >= 140 && channel <= 165) - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G); - else - cal = 0; - rt2800_bbp_write(rt2x00dev, 159, cal); - - /* FIXME: possible RX0, RX1 callibration ? */ - - /* RF IQ compensation control */ - rt2800_bbp_write(rt2x00dev, 158, 0x04); - cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL); - rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0); - - /* RF IQ imbalance compensation control */ - rt2800_bbp_write(rt2x00dev, 158, 0x03); - cal = rt2x00_eeprom_byte(rt2x00dev, - EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL); - rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0); -} - -static char rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev, - unsigned int channel, - char txpower) -{ - if (rt2x00_rt(rt2x00dev, RT3593)) - txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC); - - if (channel <= 14) - return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER); - - if (rt2x00_rt(rt2x00dev, RT3593)) - return clamp_t(char, txpower, MIN_A_TXPOWER_3593, - MAX_A_TXPOWER_3593); - else - return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); -} - -static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u32 reg; - unsigned int tx_pin; - u8 bbp, rfcsr; - - info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, - info->default_power1); - info->default_power2 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, - info->default_power2); - if (rt2x00dev->default_ant.tx_chain_num > 2) - info->default_power3 = - rt2800_txpower_to_dev(rt2x00dev, rf->channel, - info->default_power3); - - switch (rt2x00dev->chip.rf) { - case RF2020: - case RF3020: - case RF3021: - case RF3022: - case RF3320: - rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info); - break; - case RF3052: - rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info); - break; - case RF3053: - rt2800_config_channel_rf3053(rt2x00dev, conf, rf, info); - break; - case RF3290: - rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info); - break; - case RF3322: - rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); - break; - case RF3070: - case RF5360: - case RF5362: - case RF5370: - case RF5372: - case RF5390: - case RF5392: - rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info); - break; - case RF5592: - rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info); - break; - default: - rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); - } - - if (rt2x00_rf(rt2x00dev, RF3070) || - rt2x00_rf(rt2x00dev, RF3290) || - rt2x00_rf(rt2x00dev, RF3322) || - rt2x00_rf(rt2x00dev, RF5360) || - rt2x00_rf(rt2x00dev, RF5362) || - rt2x00_rf(rt2x00dev, RF5370) || - rt2x00_rf(rt2x00dev, RF5372) || - rt2x00_rf(rt2x00dev, RF5390) || - rt2x00_rf(rt2x00dev, RF5392)) { - rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0); - rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); - rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); - } - - /* - * Change BBP settings - */ - if (rt2x00_rt(rt2x00dev, RT3352)) { - rt2800_bbp_write(rt2x00dev, 27, 0x0); - rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 27, 0x20); - rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain); - } else if (rt2x00_rt(rt2x00dev, RT3593)) { - if (rf->channel > 14) { - /* Disable CCK Packet detection on 5GHz */ - rt2800_bbp_write(rt2x00dev, 70, 0x00); - } else { - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - } - - if (conf_is_ht40(conf)) - rt2800_bbp_write(rt2x00dev, 105, 0x04); - else - rt2800_bbp_write(rt2x00dev, 105, 0x34); - - rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 77, 0x98); - } else { - rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 86, 0); - } - - if (rf->channel <= 14) { - if (!rt2x00_rt(rt2x00dev, RT5390) && - !rt2x00_rt(rt2x00dev, RT5392)) { - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { - rt2800_bbp_write(rt2x00dev, 82, 0x62); - rt2800_bbp_write(rt2x00dev, 75, 0x46); - } else { - if (rt2x00_rt(rt2x00dev, RT3593)) - rt2800_bbp_write(rt2x00dev, 82, 0x62); - else - rt2800_bbp_write(rt2x00dev, 82, 0x84); - rt2800_bbp_write(rt2x00dev, 75, 0x50); - } - if (rt2x00_rt(rt2x00dev, RT3593)) - rt2800_bbp_write(rt2x00dev, 83, 0x8a); - } - - } else { - if (rt2x00_rt(rt2x00dev, RT3572)) - rt2800_bbp_write(rt2x00dev, 82, 0x94); - else if (rt2x00_rt(rt2x00dev, RT3593)) - rt2800_bbp_write(rt2x00dev, 82, 0x82); - else - rt2800_bbp_write(rt2x00dev, 82, 0xf2); - - if (rt2x00_rt(rt2x00dev, RT3593)) - rt2800_bbp_write(rt2x00dev, 83, 0x9a); - - if (rt2x00_has_cap_external_lna_a(rt2x00dev)) - rt2800_bbp_write(rt2x00dev, 75, 0x46); - else - rt2800_bbp_write(rt2x00dev, 75, 0x50); - } - - rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf)); - rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); - rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); - rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); - - if (rt2x00_rt(rt2x00dev, RT3572)) - rt2800_rfcsr_write(rt2x00dev, 8, 0); - - tx_pin = 0; - - switch (rt2x00dev->default_ant.tx_chain_num) { - case 3: - /* Turn on tertiary PAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, - rf->channel > 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, - rf->channel <= 14); - /* fall-through */ - case 2: - /* Turn on secondary PAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, - rf->channel > 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, - rf->channel <= 14); - /* fall-through */ - case 1: - /* Turn on primary PAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, - rf->channel > 14); - if (rt2x00_has_cap_bt_coexist(rt2x00dev)) - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); - else - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, - rf->channel <= 14); - break; - } - - switch (rt2x00dev->default_ant.rx_chain_num) { - case 3: - /* Turn on tertiary LNAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1); - /* fall-through */ - case 2: - /* Turn on secondary LNAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); - /* fall-through */ - case 1: - /* Turn on primary LNAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); - break; - } - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); - - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - if (rt2x00_rt(rt2x00dev, RT3572)) { - rt2800_rfcsr_write(rt2x00dev, 8, 0x80); - - /* AGC init */ - if (rf->channel <= 14) - reg = 0x1c + (2 * rt2x00dev->lna_gain); - else - reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3); - - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); - } - - if (rt2x00_rt(rt2x00dev, RT3593)) { - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - - /* Band selection */ - if (rt2x00_is_usb(rt2x00dev) || - rt2x00_is_pcie(rt2x00dev)) { - /* GPIO #8 controls all paths */ - rt2x00_set_field32(®, GPIO_CTRL_DIR8, 0); - if (rf->channel <= 14) - rt2x00_set_field32(®, GPIO_CTRL_VAL8, 1); - else - rt2x00_set_field32(®, GPIO_CTRL_VAL8, 0); - } - - /* LNA PE control. */ - if (rt2x00_is_usb(rt2x00dev)) { - /* GPIO #4 controls PE0 and PE1, - * GPIO #7 controls PE2 - */ - rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); - rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0); - - rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); - rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1); - } else if (rt2x00_is_pcie(rt2x00dev)) { - /* GPIO #4 controls PE0, PE1 and PE2 */ - rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); - rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); - } - - rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); - - /* AGC init */ - if (rf->channel <= 14) - reg = 0x1c + 2 * rt2x00dev->lna_gain; - else - reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3); - - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); - - usleep_range(1000, 1500); - } - - if (rt2x00_rt(rt2x00dev, RT5592)) { - rt2800_bbp_write(rt2x00dev, 195, 141); - rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a); - - /* AGC init */ - reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2 * rt2x00dev->lna_gain; - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); - - rt2800_iq_calibrate(rt2x00dev, rf->channel); - } - - rt2800_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800_bbp_write(rt2x00dev, 4, bbp); - - rt2800_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf)); - rt2800_bbp_write(rt2x00dev, 3, bbp); - - if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { - if (conf_is_ht40(conf)) { - rt2800_bbp_write(rt2x00dev, 69, 0x1a); - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - rt2800_bbp_write(rt2x00dev, 73, 0x16); - } else { - rt2800_bbp_write(rt2x00dev, 69, 0x16); - rt2800_bbp_write(rt2x00dev, 70, 0x08); - rt2800_bbp_write(rt2x00dev, 73, 0x11); - } - } - - msleep(1); - - /* - * Clear channel statistic counters - */ - rt2800_register_read(rt2x00dev, CH_IDLE_STA, ®); - rt2800_register_read(rt2x00dev, CH_BUSY_STA, ®); - rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, ®); - - /* - * Clear update flag - */ - if (rt2x00_rt(rt2x00dev, RT3352)) { - rt2800_bbp_read(rt2x00dev, 49, &bbp); - rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0); - rt2800_bbp_write(rt2x00dev, 49, bbp); - } -} - -static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) -{ - u8 tssi_bounds[9]; - u8 current_tssi; - u16 eeprom; - u8 step; - int i; - - /* - * First check if temperature compensation is supported. - */ - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); - if (!rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC)) - return 0; - - /* - * Read TSSI boundaries for temperature compensation from - * the EEPROM. - * - * Array idx 0 1 2 3 4 5 6 7 8 - * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4 - * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00 - */ - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom); - tssi_bounds[0] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG1_MINUS4); - tssi_bounds[1] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG1_MINUS3); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom); - tssi_bounds[2] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG2_MINUS2); - tssi_bounds[3] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG2_MINUS1); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom); - tssi_bounds[4] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG3_REF); - tssi_bounds[5] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG3_PLUS1); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom); - tssi_bounds[6] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG4_PLUS2); - tssi_bounds[7] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG4_PLUS3); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom); - tssi_bounds[8] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG5_PLUS4); - - step = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_BG5_AGC_STEP); - } else { - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom); - tssi_bounds[0] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A1_MINUS4); - tssi_bounds[1] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A1_MINUS3); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom); - tssi_bounds[2] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A2_MINUS2); - tssi_bounds[3] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A2_MINUS1); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom); - tssi_bounds[4] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A3_REF); - tssi_bounds[5] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A3_PLUS1); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom); - tssi_bounds[6] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A4_PLUS2); - tssi_bounds[7] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A4_PLUS3); - - rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom); - tssi_bounds[8] = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A5_PLUS4); - - step = rt2x00_get_field16(eeprom, - EEPROM_TSSI_BOUND_A5_AGC_STEP); - } - - /* - * Check if temperature compensation is supported. - */ - if (tssi_bounds[4] == 0xff || step == 0xff) - return 0; - - /* - * Read current TSSI (BBP 49). - */ - rt2800_bbp_read(rt2x00dev, 49, ¤t_tssi); - - /* - * Compare TSSI value (BBP49) with the compensation boundaries - * from the EEPROM and increase or decrease tx power. - */ - for (i = 0; i <= 3; i++) { - if (current_tssi > tssi_bounds[i]) - break; - } - - if (i == 4) { - for (i = 8; i >= 5; i--) { - if (current_tssi < tssi_bounds[i]) - break; - } - } - - return (i - 4) * step; -} - -static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev, - enum ieee80211_band band) -{ - u16 eeprom; - u8 comp_en; - u8 comp_type; - int comp_value = 0; - - rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom); - - /* - * HT40 compensation not required. - */ - if (eeprom == 0xffff || - !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0; - - if (band == IEEE80211_BAND_2GHZ) { - comp_en = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_DELTA_ENABLE_2G); - if (comp_en) { - comp_type = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_DELTA_TYPE_2G); - comp_value = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_DELTA_VALUE_2G); - if (!comp_type) - comp_value = -comp_value; - } - } else { - comp_en = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_DELTA_ENABLE_5G); - if (comp_en) { - comp_type = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_DELTA_TYPE_5G); - comp_value = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_DELTA_VALUE_5G); - if (!comp_type) - comp_value = -comp_value; - } - } - - return comp_value; -} - -static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev, - int power_level, int max_power) -{ - int delta; - - if (rt2x00_has_cap_power_limit(rt2x00dev)) - return 0; - - /* - * XXX: We don't know the maximum transmit power of our hardware since - * the EEPROM doesn't expose it. We only know that we are calibrated - * to 100% tx power. - * - * Hence, we assume the regulatory limit that cfg80211 calulated for - * the current channel is our maximum and if we are requested to lower - * the value we just reduce our tx power accordingly. - */ - delta = power_level - max_power; - return min(delta, 0); -} - -static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b, - enum ieee80211_band band, int power_level, - u8 txpower, int delta) -{ - u16 eeprom; - u8 criterion; - u8 eirp_txpower; - u8 eirp_txpower_criterion; - u8 reg_limit; - - if (rt2x00_rt(rt2x00dev, RT3593)) - return min_t(u8, txpower, 0xc); - - if (rt2x00_has_cap_power_limit(rt2x00dev)) { - /* - * Check if eirp txpower exceed txpower_limit. - * We use OFDM 6M as criterion and its eirp txpower - * is stored at EEPROM_EIRP_MAX_TX_POWER. - * .11b data rate need add additional 4dbm - * when calculating eirp txpower. - */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - 1, &eeprom); - criterion = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE0); - - rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER, - &eeprom); - - if (band == IEEE80211_BAND_2GHZ) - eirp_txpower_criterion = rt2x00_get_field16(eeprom, - EEPROM_EIRP_MAX_TX_POWER_2GHZ); - else - eirp_txpower_criterion = rt2x00_get_field16(eeprom, - EEPROM_EIRP_MAX_TX_POWER_5GHZ); - - eirp_txpower = eirp_txpower_criterion + (txpower - criterion) + - (is_rate_b ? 4 : 0) + delta; - - reg_limit = (eirp_txpower > power_level) ? - (eirp_txpower - power_level) : 0; - } else - reg_limit = 0; - - txpower = max(0, txpower + delta - reg_limit); - return min_t(u8, txpower, 0xc); -} - - -enum { - TX_PWR_CFG_0_IDX, - TX_PWR_CFG_1_IDX, - TX_PWR_CFG_2_IDX, - TX_PWR_CFG_3_IDX, - TX_PWR_CFG_4_IDX, - TX_PWR_CFG_5_IDX, - TX_PWR_CFG_6_IDX, - TX_PWR_CFG_7_IDX, - TX_PWR_CFG_8_IDX, - TX_PWR_CFG_9_IDX, - TX_PWR_CFG_0_EXT_IDX, - TX_PWR_CFG_1_EXT_IDX, - TX_PWR_CFG_2_EXT_IDX, - TX_PWR_CFG_3_EXT_IDX, - TX_PWR_CFG_4_EXT_IDX, - TX_PWR_CFG_IDX_COUNT, -}; - -static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev, - struct ieee80211_channel *chan, - int power_level) -{ - u8 txpower; - u16 eeprom; - u32 regs[TX_PWR_CFG_IDX_COUNT]; - unsigned int offset; - enum ieee80211_band band = chan->band; - int delta; - int i; - - memset(regs, '\0', sizeof(regs)); - - /* TODO: adapt TX power reduction from the rt28xx code */ - - /* calculate temperature compensation delta */ - delta = rt2800_get_gain_calibration_delta(rt2x00dev); - - if (band == IEEE80211_BAND_5GHZ) - offset = 16; - else - offset = 0; - - if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - offset += 8; - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset, &eeprom); - - /* CCK 1MBS,2MBS */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_CCK1_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_CCK1_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], - TX_PWR_CFG_0_EXT_CCK1_CH2, txpower); - - /* CCK 5.5MBS,11MBS */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_CCK5_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_CCK5_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], - TX_PWR_CFG_0_EXT_CCK5_CH2, txpower); - - /* OFDM 6MBS,9MBS */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_OFDM6_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_OFDM6_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], - TX_PWR_CFG_0_EXT_OFDM6_CH2, txpower); - - /* OFDM 12MBS,18MBS */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_OFDM12_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX], - TX_PWR_CFG_0_OFDM12_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX], - TX_PWR_CFG_0_EXT_OFDM12_CH2, txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset + 1, &eeprom); - - /* OFDM 24MBS,36MBS */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_OFDM24_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_OFDM24_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], - TX_PWR_CFG_1_EXT_OFDM24_CH2, txpower); - - /* OFDM 48MBS */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_OFDM48_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_OFDM48_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], - TX_PWR_CFG_1_EXT_OFDM48_CH2, txpower); - - /* OFDM 54MBS */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], - TX_PWR_CFG_7_OFDM54_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], - TX_PWR_CFG_7_OFDM54_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], - TX_PWR_CFG_7_OFDM54_CH2, txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset + 2, &eeprom); - - /* MCS 0,1 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_MCS0_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_MCS0_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], - TX_PWR_CFG_1_EXT_MCS0_CH2, txpower); - - /* MCS 2,3 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_MCS2_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX], - TX_PWR_CFG_1_MCS2_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX], - TX_PWR_CFG_1_EXT_MCS2_CH2, txpower); - - /* MCS 4,5 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS4_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS4_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], - TX_PWR_CFG_2_EXT_MCS4_CH2, txpower); - - /* MCS 6 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS6_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS6_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], - TX_PWR_CFG_2_EXT_MCS6_CH2, txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset + 3, &eeprom); - - /* MCS 7 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], - TX_PWR_CFG_7_MCS7_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], - TX_PWR_CFG_7_MCS7_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX], - TX_PWR_CFG_7_MCS7_CH2, txpower); - - /* MCS 8,9 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS8_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS8_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], - TX_PWR_CFG_2_EXT_MCS8_CH2, txpower); - - /* MCS 10,11 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS10_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX], - TX_PWR_CFG_2_MCS10_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX], - TX_PWR_CFG_2_EXT_MCS10_CH2, txpower); - - /* MCS 12,13 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_MCS12_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_MCS12_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], - TX_PWR_CFG_3_EXT_MCS12_CH2, txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset + 4, &eeprom); - - /* MCS 14 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_MCS14_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_MCS14_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], - TX_PWR_CFG_3_EXT_MCS14_CH2, txpower); - - /* MCS 15 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], - TX_PWR_CFG_8_MCS15_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], - TX_PWR_CFG_8_MCS15_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], - TX_PWR_CFG_8_MCS15_CH2, txpower); - - /* MCS 16,17 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], - TX_PWR_CFG_5_MCS16_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], - TX_PWR_CFG_5_MCS16_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], - TX_PWR_CFG_5_MCS16_CH2, txpower); - - /* MCS 18,19 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], - TX_PWR_CFG_5_MCS18_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], - TX_PWR_CFG_5_MCS18_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX], - TX_PWR_CFG_5_MCS18_CH2, txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset + 5, &eeprom); - - /* MCS 20,21 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], - TX_PWR_CFG_6_MCS20_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], - TX_PWR_CFG_6_MCS20_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], - TX_PWR_CFG_6_MCS20_CH2, txpower); - - /* MCS 22 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], - TX_PWR_CFG_6_MCS22_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], - TX_PWR_CFG_6_MCS22_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX], - TX_PWR_CFG_6_MCS22_CH2, txpower); - - /* MCS 23 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], - TX_PWR_CFG_8_MCS23_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], - TX_PWR_CFG_8_MCS23_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX], - TX_PWR_CFG_8_MCS23_CH2, txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset + 6, &eeprom); - - /* STBC, MCS 0,1 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_STBC0_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_STBC0_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], - TX_PWR_CFG_3_EXT_STBC0_CH2, txpower); - - /* STBC, MCS 2,3 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_STBC2_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX], - TX_PWR_CFG_3_STBC2_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX], - TX_PWR_CFG_3_EXT_STBC2_CH2, txpower); - - /* STBC, MCS 4,5 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE0, - txpower); - - /* STBC, MCS 6 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE2, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE3, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE2, - txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - offset + 7, &eeprom); - - /* STBC, MCS 7 */ - txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level, - txpower, delta); - rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX], - TX_PWR_CFG_9_STBC7_CH0, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX], - TX_PWR_CFG_9_STBC7_CH1, txpower); - rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX], - TX_PWR_CFG_9_STBC7_CH2, txpower); - - rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, regs[TX_PWR_CFG_0_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, regs[TX_PWR_CFG_1_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, regs[TX_PWR_CFG_2_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, regs[TX_PWR_CFG_3_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, regs[TX_PWR_CFG_4_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_5, regs[TX_PWR_CFG_5_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_6, regs[TX_PWR_CFG_6_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, regs[TX_PWR_CFG_7_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, regs[TX_PWR_CFG_8_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, regs[TX_PWR_CFG_9_IDX]); - - rt2800_register_write(rt2x00dev, TX_PWR_CFG_0_EXT, - regs[TX_PWR_CFG_0_EXT_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_1_EXT, - regs[TX_PWR_CFG_1_EXT_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_2_EXT, - regs[TX_PWR_CFG_2_EXT_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_3_EXT, - regs[TX_PWR_CFG_3_EXT_IDX]); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_4_EXT, - regs[TX_PWR_CFG_4_EXT_IDX]); - - for (i = 0; i < TX_PWR_CFG_IDX_COUNT; i++) - rt2x00_dbg(rt2x00dev, - "band:%cGHz, BW:%c0MHz, TX_PWR_CFG_%d%s = %08lx\n", - (band == IEEE80211_BAND_5GHZ) ? '5' : '2', - (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ? - '4' : '2', - (i > TX_PWR_CFG_9_IDX) ? - (i - TX_PWR_CFG_9_IDX - 1) : i, - (i > TX_PWR_CFG_9_IDX) ? "_EXT" : "", - (unsigned long) regs[i]); -} - -/* - * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and - * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values, - * 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power - * for all rates, but allow to set only 4 discrete values: -12, -6, 0 and 6 dBm. - * Reference per rate transmit power values are located in the EEPROM at - * EEPROM_TXPOWER_BYRATE offset. We adjust them and BBP R1 settings according to - * current conditions (i.e. band, bandwidth, temperature, user settings). - */ -static void rt2800_config_txpower_rt28xx(struct rt2x00_dev *rt2x00dev, - struct ieee80211_channel *chan, - int power_level) -{ - u8 txpower, r1; - u16 eeprom; - u32 reg, offset; - int i, is_rate_b, delta, power_ctrl; - enum ieee80211_band band = chan->band; - - /* - * Calculate HT40 compensation. For 40MHz we need to add or subtract - * value read from EEPROM (different for 2GHz and for 5GHz). - */ - delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); - - /* - * Calculate temperature compensation. Depends on measurement of current - * TSSI (Transmitter Signal Strength Indication) we know TX power (due - * to temperature or maybe other factors) is smaller or bigger than - * expected. We adjust it, based on TSSI reference and boundaries values - * provided in EEPROM. - */ - switch (rt2x00dev->chip.rt) { - case RT2860: - case RT2872: - case RT2883: - case RT3070: - case RT3071: - case RT3090: - case RT3572: - delta += rt2800_get_gain_calibration_delta(rt2x00dev); - break; - default: - /* TODO: temperature compensation code for other chips. */ - break; - } - - /* - * Decrease power according to user settings, on devices with unknown - * maximum tx power. For other devices we take user power_level into - * consideration on rt2800_compensate_txpower(). - */ - delta += rt2800_get_txpower_reg_delta(rt2x00dev, power_level, - chan->max_power); - - /* - * BBP_R1 controls TX power for all rates, it allow to set the following - * gains -12, -6, 0, +6 dBm by setting values 2, 1, 0, 3 respectively. - * - * TODO: we do not use +6 dBm option to do not increase power beyond - * regulatory limit, however this could be utilized for devices with - * CAPABILITY_POWER_LIMIT. - */ - if (delta <= -12) { - power_ctrl = 2; - delta += 12; - } else if (delta <= -6) { - power_ctrl = 1; - delta += 6; - } else { - power_ctrl = 0; - } - rt2800_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl); - rt2800_bbp_write(rt2x00dev, 1, r1); - - offset = TX_PWR_CFG_0; - - for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) { - /* just to be safe */ - if (offset > TX_PWR_CFG_4) - break; - - rt2800_register_read(rt2x00dev, offset, ®); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - i, &eeprom); - - is_rate_b = i ? 0 : 1; - /* - * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS, - * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE0, txpower); - - /* - * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS, - * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE1, txpower); - - /* - * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS, - * TX_PWR_CFG_2: MCS6, TX_PWR_CFG_3: MCS14, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE2, txpower); - - /* - * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS, - * TX_PWR_CFG_2: MCS7, TX_PWR_CFG_3: MCS15, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE3, txpower); - - /* read the next four txpower values */ - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, - i + 1, &eeprom); - - is_rate_b = 0; - /* - * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0, - * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE4, txpower); - - /* - * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1, - * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE5, txpower); - - /* - * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2, - * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE6, txpower); - - /* - * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3, - * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown, - * TX_PWR_CFG_4: unknown - */ - txpower = rt2x00_get_field16(eeprom, - EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower, delta); - rt2x00_set_field32(®, TX_PWR_CFG_RATE7, txpower); - - rt2800_register_write(rt2x00dev, offset, reg); - - /* next TX_PWR_CFG register */ - offset += 4; - } -} - -static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, - struct ieee80211_channel *chan, - int power_level) -{ - if (rt2x00_rt(rt2x00dev, RT3593)) - rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level); - else - rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level); -} - -void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev) -{ - rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan, - rt2x00dev->tx_power); -} -EXPORT_SYMBOL_GPL(rt2800_gain_calibration); - -void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev) -{ - u32 tx_pin; - u8 rfcsr; - - /* - * A voltage-controlled oscillator(VCO) is an electronic oscillator - * designed to be controlled in oscillation frequency by a voltage - * input. Maybe the temperature will affect the frequency of - * oscillation to be shifted. The VCO calibration will be called - * periodically to adjust the frequency to be precision. - */ - - rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin); - tx_pin &= TX_PIN_CFG_PA_PE_DISABLE; - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - switch (rt2x00dev->chip.rf) { - case RF2020: - case RF3020: - case RF3021: - case RF3022: - case RF3320: - case RF3052: - rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); - break; - case RF3053: - case RF3070: - case RF3290: - case RF5360: - case RF5362: - case RF5370: - case RF5372: - case RF5390: - case RF5392: - rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); - rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); - break; - default: - return; - } - - mdelay(1); - - rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin); - if (rt2x00dev->rf_channel <= 14) { - switch (rt2x00dev->default_ant.tx_chain_num) { - case 3: - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1); - /* fall through */ - case 2: - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); - /* fall through */ - case 1: - default: - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); - break; - } - } else { - switch (rt2x00dev->default_ant.tx_chain_num) { - case 3: - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1); - /* fall through */ - case 2: - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); - /* fall through */ - case 1: - default: - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); - break; - } - } - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - -} -EXPORT_SYMBOL_GPL(rt2800_vco_calibration); - -static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); -} - -static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - - rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } else { - rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } -} - -void rt2800_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt2800_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) { - rt2800_config_channel(rt2x00dev, libconf->conf, - &libconf->rf, &libconf->channel); - rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan, - libconf->conf->power_level); - } - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan, - libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2800_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2800_config_ps(rt2x00dev, libconf); -} -EXPORT_SYMBOL_GPL(rt2800_config); - -/* - * Link tuning - */ -void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -} -EXPORT_SYMBOL_GPL(rt2800_link_stats); - -static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) -{ - u8 vgc; - - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3090) || - rt2x00_rt(rt2x00dev, RT3290) || - rt2x00_rt(rt2x00dev, RT3390) || - rt2x00_rt(rt2x00dev, RT3572) || - rt2x00_rt(rt2x00dev, RT3593) || - rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392) || - rt2x00_rt(rt2x00dev, RT5592)) - vgc = 0x1c + (2 * rt2x00dev->lna_gain); - else - vgc = 0x2e + rt2x00dev->lna_gain; - } else { /* 5GHZ band */ - if (rt2x00_rt(rt2x00dev, RT3593)) - vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; - else if (rt2x00_rt(rt2x00dev, RT5592)) - vgc = 0x24 + (2 * rt2x00dev->lna_gain); - else { - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - vgc = 0x32 + (rt2x00dev->lna_gain * 5) / 3; - else - vgc = 0x3a + (rt2x00dev->lna_gain * 5) / 3; - } - } - - return vgc; -} - -static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - if (rt2x00_rt(rt2x00dev, RT3572) || - rt2x00_rt(rt2x00dev, RT3593)) { - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, - vgc_level); - } else if (rt2x00_rt(rt2x00dev, RT5592)) { - rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a); - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level); - } else { - rt2800_bbp_write(rt2x00dev, 66, vgc_level); - } - - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) -{ - rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev)); -} -EXPORT_SYMBOL_GPL(rt2800_reset_tuner); - -void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, - const u32 count) -{ - u8 vgc; - - if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) - return; - - /* When RSSI is better than a certain threshold, increase VGC - * with a chip specific value in order to improve the balance - * between sensibility and noise isolation. - */ - - vgc = rt2800_get_default_vgc(rt2x00dev); - - switch (rt2x00dev->chip.rt) { - case RT3572: - case RT3593: - if (qual->rssi > -65) { - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) - vgc += 0x20; - else - vgc += 0x10; - } - break; - - case RT5592: - if (qual->rssi > -65) - vgc += 0x20; - break; - - default: - if (qual->rssi > -80) - vgc += 0x10; - break; - } - - rt2800_set_vgc(rt2x00dev, qual, vgc); -} -EXPORT_SYMBOL_GPL(rt2800_link_tuner); - -/* - * Initialization functions. - */ -static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 eeprom; - unsigned int i; - int ret; - - rt2800_disable_wpdma(rt2x00dev); - - ret = rt2800_drv_init_registers(rt2x00dev); - if (ret) - return ret; - - rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); - rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 1600); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - rt2800_config_filter(rt2x00dev, FIF_ALLMULTI); - - rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, 9); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); - rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - if (rt2x00_rt(rt2x00dev, RT3290)) { - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - if (rt2x00_get_field32(reg, WLAN_EN) == 1) { - rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - } - - rt2800_register_read(rt2x00dev, CMB_CTRL, ®); - if (!(rt2x00_get_field32(reg, LDO0_EN) == 1)) { - rt2x00_set_field32(®, LDO0_EN, 1); - rt2x00_set_field32(®, LDO_BGSEL, 3); - rt2800_register_write(rt2x00dev, CMB_CTRL, reg); - } - - rt2800_register_read(rt2x00dev, OSC_CTRL, ®); - rt2x00_set_field32(®, OSC_ROSC_EN, 1); - rt2x00_set_field32(®, OSC_CAL_REQ, 1); - rt2x00_set_field32(®, OSC_REF_CYCLE, 0x27); - rt2800_register_write(rt2x00dev, OSC_CTRL, reg); - - rt2800_register_read(rt2x00dev, COEX_CFG0, ®); - rt2x00_set_field32(®, COEX_CFG_ANT, 0x5e); - rt2800_register_write(rt2x00dev, COEX_CFG0, reg); - - rt2800_register_read(rt2x00dev, COEX_CFG2, ®); - rt2x00_set_field32(®, BT_COEX_CFG1, 0x00); - rt2x00_set_field32(®, BT_COEX_CFG0, 0x17); - rt2x00_set_field32(®, WL_COEX_CFG1, 0x93); - rt2x00_set_field32(®, WL_COEX_CFG0, 0x7f); - rt2800_register_write(rt2x00dev, COEX_CFG2, reg); - - rt2800_register_read(rt2x00dev, PLL_CTRL, ®); - rt2x00_set_field32(®, PLL_CONTROL, 1); - rt2800_register_write(rt2x00dev, PLL_CTRL, reg); - } - - if (rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3090) || - rt2x00_rt(rt2x00dev, RT3290) || - rt2x00_rt(rt2x00dev, RT3390)) { - - if (rt2x00_rt(rt2x00dev, RT3290)) - rt2800_register_write(rt2x00dev, TX_SW_CFG0, - 0x00000404); - else - rt2800_register_write(rt2x00dev, TX_SW_CFG0, - 0x00000400); - - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); - if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || - rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || - rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, - &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST)) - rt2800_register_write(rt2x00dev, TX_SW_CFG2, - 0x0000002c); - else - rt2800_register_write(rt2x00dev, TX_SW_CFG2, - 0x0000000f); - } else { - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } - } else if (rt2x00_rt(rt2x00dev, RT3070)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); - - if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c); - } else { - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } - } else if (rt2800_is_305x_soc(rt2x00dev)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030); - } else if (rt2x00_rt(rt2x00dev, RT3352)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } else if (rt2x00_rt(rt2x00dev, RT3572)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - } else if (rt2x00_rt(rt2x00dev, RT3593)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); - if (rt2x00_rt_rev_lt(rt2x00dev, RT3593, REV_RT3593E)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, - &eeprom); - if (rt2x00_get_field16(eeprom, - EEPROM_NIC_CONF1_DAC_TEST)) - rt2800_register_write(rt2x00dev, TX_SW_CFG2, - 0x0000001f); - else - rt2800_register_write(rt2x00dev, TX_SW_CFG2, - 0x0000000f); - } else { - rt2800_register_write(rt2x00dev, TX_SW_CFG2, - 0x00000000); - } - } else if (rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392) || - rt2x00_rt(rt2x00dev, RT5592)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } else { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - } - - rt2800_register_read(rt2x00dev, TX_LINK_CFG, ®); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); - rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); - rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg); - - rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); - rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®); - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); - if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) || - rt2x00_rt(rt2x00dev, RT2883) || - rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E)) - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); - else - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); - rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg); - - rt2800_register_read(rt2x00dev, LED_CFG, ®); - rt2x00_set_field32(®, LED_CFG_ON_PERIOD, 70); - rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, 30); - rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); - rt2800_register_write(rt2x00dev, LED_CFG, reg); - - rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); - - rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, 15); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, 31); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); - rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); - rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); - - rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, 1); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, 1); - rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); - rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 3); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV_SHORT, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1); - rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 3); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV_SHORT, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1); - rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV_SHORT, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 0); - rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV_SHORT, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 0); - rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV_SHORT, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 0); - rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV_SHORT, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 0); - rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - if (rt2x00_is_usb(rt2x00dev)) { - rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006); - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - } - - /* - * The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1 - * although it is reserved. - */ - rt2800_register_read(rt2x00dev, TXOP_CTRL_CFG, ®); - rt2x00_set_field32(®, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN, 1); - rt2x00_set_field32(®, TXOP_CTRL_CFG_AC_TRUN_EN, 1); - rt2x00_set_field32(®, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN, 1); - rt2x00_set_field32(®, TXOP_CTRL_CFG_USER_MODE_TRUN_EN, 1); - rt2x00_set_field32(®, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN, 1); - rt2x00_set_field32(®, TXOP_CTRL_CFG_RESERVED_TRUN_EN, 1); - rt2x00_set_field32(®, TXOP_CTRL_CFG_LSIG_TXOP_EN, 0); - rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CCA_EN, 0); - rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CCA_DLY, 88); - rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CWMIN, 0); - rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg); - - reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002; - rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg); - - rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, - IEEE80211_MAX_RTS_THRESHOLD); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); - rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); - - /* - * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS - * time should be set to 16. However, the original Ralink driver uses - * 16 for both and indeed using a value of 10 for CCK SIFS results in - * connection problems with 11g + CTS protection. Hence, use the same - * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS. - */ - rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, 314); - rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); - rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - /* - * ASIC will keep garbage value after boot, clear encryption keys. - */ - for (i = 0; i < 4; i++) - rt2800_register_write(rt2x00dev, - SHARED_KEY_MODE_ENTRY(i), 0); - - for (i = 0; i < 256; i++) { - rt2800_config_wcid(rt2x00dev, NULL, i); - rt2800_delete_wcid_attr(rt2x00dev, i); - rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); - } - - /* - * Clear all beacons - */ - for (i = 0; i < 8; i++) - rt2800_clear_beacon_register(rt2x00dev, i); - - if (rt2x00_is_usb(rt2x00dev)) { - rt2800_register_read(rt2x00dev, US_CYC_CNT, ®); - rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 30); - rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); - } else if (rt2x00_is_pcie(rt2x00dev)) { - rt2800_register_read(rt2x00dev, US_CYC_CNT, ®); - rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125); - rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); - } - - rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); - rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg); - - rt2800_register_read(rt2x00dev, HT_FBK_CFG1, ®); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); - rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg); - - rt2800_register_read(rt2x00dev, LG_FBK_CFG0, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); - rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg); - - rt2800_register_read(rt2x00dev, LG_FBK_CFG1, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); - rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg); - - /* - * Do not force the BA window size, we use the TXWI to set it - */ - rt2800_register_read(rt2x00dev, AMPDU_BA_WINSIZE, ®); - rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE, 0); - rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE, 0); - rt2800_register_write(rt2x00dev, AMPDU_BA_WINSIZE, reg); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); - rt2800_register_read(rt2x00dev, RX_STA_CNT1, ®); - rt2800_register_read(rt2x00dev, RX_STA_CNT2, ®); - rt2800_register_read(rt2x00dev, TX_STA_CNT0, ®); - rt2800_register_read(rt2x00dev, TX_STA_CNT1, ®); - rt2800_register_read(rt2x00dev, TX_STA_CNT2, ®); - - /* - * Setup leadtime for pre tbtt interrupt to 6ms - */ - rt2800_register_read(rt2x00dev, INT_TIMER_CFG, ®); - rt2x00_set_field32(®, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4); - rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg); - - /* - * Set up channel statistics timer - */ - rt2800_register_read(rt2x00dev, CH_TIME_CFG, ®); - rt2x00_set_field32(®, CH_TIME_CFG_EIFS_BUSY, 1); - rt2x00_set_field32(®, CH_TIME_CFG_NAV_BUSY, 1); - rt2x00_set_field32(®, CH_TIME_CFG_RX_BUSY, 1); - rt2x00_set_field32(®, CH_TIME_CFG_TX_BUSY, 1); - rt2x00_set_field32(®, CH_TIME_CFG_TMR_EN, 1); - rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg); - - return 0; -} - -static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, ®); - if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) - return 0; - - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n"); - return -EACCES; -} - -static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - /* - * BBP was enabled after firmware was loaded, - * but we need to reactivate it now. - */ - rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - msleep(1); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} - -static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev) -{ - u8 value; - - rt2800_bbp_read(rt2x00dev, 4, &value); - rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1); - rt2800_bbp_write(rt2x00dev, 4, value); -} - -static void rt2800_init_freq_calibration(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 142, 1); - rt2800_bbp_write(rt2x00dev, 143, 57); -} - -static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev) -{ - const u8 glrt_table[] = { - 0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */ - 0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */ - 0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */ - 0X3C, 0x34, 0x2C, 0x2F, 0x3C, 0x35, 0x2E, 0x2A, 0x49, 0x41, /* 158 ~ 167 */ - 0x36, 0x31, 0x30, 0x30, 0x0E, 0x0D, 0x28, 0x21, 0x1C, 0x16, /* 168 ~ 177 */ - 0x50, 0x4A, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, /* 178 ~ 187 */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 188 ~ 197 */ - 0x00, 0x00, 0x7D, 0x14, 0x32, 0x2C, 0x36, 0x4C, 0x43, 0x2C, /* 198 ~ 207 */ - 0x2E, 0x36, 0x30, 0x6E, /* 208 ~ 211 */ - }; - int i; - - for (i = 0; i < ARRAY_SIZE(glrt_table); i++) { - rt2800_bbp_write(rt2x00dev, 195, 128 + i); - rt2800_bbp_write(rt2x00dev, 196, glrt_table[i]); - } -}; - -static void rt2800_init_bbp_early(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 65, 0x2C); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - rt2800_bbp_write(rt2x00dev, 68, 0x0B); - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - rt2800_bbp_write(rt2x00dev, 73, 0x10); - rt2800_bbp_write(rt2x00dev, 81, 0x37); - rt2800_bbp_write(rt2x00dev, 82, 0x62); - rt2800_bbp_write(rt2x00dev, 83, 0x6A); - rt2800_bbp_write(rt2x00dev, 84, 0x99); - rt2800_bbp_write(rt2x00dev, 86, 0x00); - rt2800_bbp_write(rt2x00dev, 91, 0x04); - rt2800_bbp_write(rt2x00dev, 92, 0x00); - rt2800_bbp_write(rt2x00dev, 103, 0x00); - rt2800_bbp_write(rt2x00dev, 105, 0x05); - rt2800_bbp_write(rt2x00dev, 106, 0x35); -} - -static void rt2800_disable_unused_dac_adc(struct rt2x00_dev *rt2x00dev) -{ - u16 eeprom; - u8 value; - - rt2800_bbp_read(rt2x00dev, 138, &value); - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) - value |= 0x20; - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) - value &= ~0x02; - rt2800_bbp_write(rt2x00dev, 138, value); -} - -static void rt2800_init_bbp_305x_soc(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 31, 0x08); - - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x10); - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 78, 0x0e); - rt2800_bbp_write(rt2x00dev, 80, 0x08); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x6a); - - rt2800_bbp_write(rt2x00dev, 84, 0x99); - - rt2800_bbp_write(rt2x00dev, 86, 0x00); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x00); - - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - - rt2800_bbp_write(rt2x00dev, 105, 0x01); - - rt2800_bbp_write(rt2x00dev, 106, 0x35); -} - -static void rt2800_init_bbp_28xx(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { - rt2800_bbp_write(rt2x00dev, 69, 0x16); - rt2800_bbp_write(rt2x00dev, 73, 0x12); - } else { - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x10); - } - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 81, 0x37); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x6a); - - if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D)) - rt2800_bbp_write(rt2x00dev, 84, 0x19); - else - rt2800_bbp_write(rt2x00dev, 84, 0x99); - - rt2800_bbp_write(rt2x00dev, 86, 0x00); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x00); - - rt2800_bbp_write(rt2x00dev, 103, 0x00); - - rt2800_bbp_write(rt2x00dev, 105, 0x05); - - rt2800_bbp_write(rt2x00dev, 106, 0x35); -} - -static void rt2800_init_bbp_30xx(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x10); - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 79, 0x13); - rt2800_bbp_write(rt2x00dev, 80, 0x05); - rt2800_bbp_write(rt2x00dev, 81, 0x33); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x6a); - - rt2800_bbp_write(rt2x00dev, 84, 0x99); - - rt2800_bbp_write(rt2x00dev, 86, 0x00); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x00); - - if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) || - rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) || - rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E)) - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - else - rt2800_bbp_write(rt2x00dev, 103, 0x00); - - rt2800_bbp_write(rt2x00dev, 105, 0x05); - - rt2800_bbp_write(rt2x00dev, 106, 0x35); - - if (rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3090)) - rt2800_disable_unused_dac_adc(rt2x00dev); -} - -static void rt2800_init_bbp_3290(struct rt2x00_dev *rt2x00dev) -{ - u8 value; - - rt2800_bbp4_mac_if_ctrl(rt2x00dev); - - rt2800_bbp_write(rt2x00dev, 31, 0x08); - - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - rt2800_bbp_write(rt2x00dev, 68, 0x0b); - - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x13); - rt2800_bbp_write(rt2x00dev, 75, 0x46); - rt2800_bbp_write(rt2x00dev, 76, 0x28); - - rt2800_bbp_write(rt2x00dev, 77, 0x58); - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 74, 0x0b); - rt2800_bbp_write(rt2x00dev, 79, 0x18); - rt2800_bbp_write(rt2x00dev, 80, 0x09); - rt2800_bbp_write(rt2x00dev, 81, 0x33); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x7a); - - rt2800_bbp_write(rt2x00dev, 84, 0x9a); - - rt2800_bbp_write(rt2x00dev, 86, 0x38); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x02); - - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - - rt2800_bbp_write(rt2x00dev, 104, 0x92); - - rt2800_bbp_write(rt2x00dev, 105, 0x1c); - - rt2800_bbp_write(rt2x00dev, 106, 0x03); - - rt2800_bbp_write(rt2x00dev, 128, 0x12); - - rt2800_bbp_write(rt2x00dev, 67, 0x24); - rt2800_bbp_write(rt2x00dev, 143, 0x04); - rt2800_bbp_write(rt2x00dev, 142, 0x99); - rt2800_bbp_write(rt2x00dev, 150, 0x30); - rt2800_bbp_write(rt2x00dev, 151, 0x2e); - rt2800_bbp_write(rt2x00dev, 152, 0x20); - rt2800_bbp_write(rt2x00dev, 153, 0x34); - rt2800_bbp_write(rt2x00dev, 154, 0x40); - rt2800_bbp_write(rt2x00dev, 155, 0x3b); - rt2800_bbp_write(rt2x00dev, 253, 0x04); - - rt2800_bbp_read(rt2x00dev, 47, &value); - rt2x00_set_field8(&value, BBP47_TSSI_ADC6, 1); - rt2800_bbp_write(rt2x00dev, 47, value); - - /* Use 5-bit ADC for Acquisition and 8-bit ADC for data */ - rt2800_bbp_read(rt2x00dev, 3, &value); - rt2x00_set_field8(&value, BBP3_ADC_MODE_SWITCH, 1); - rt2x00_set_field8(&value, BBP3_ADC_INIT_MODE, 1); - rt2800_bbp_write(rt2x00dev, 3, value); -} - -static void rt2800_init_bbp_3352(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 3, 0x00); - rt2800_bbp_write(rt2x00dev, 4, 0x50); - - rt2800_bbp_write(rt2x00dev, 31, 0x08); - - rt2800_bbp_write(rt2x00dev, 47, 0x48); - - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - rt2800_bbp_write(rt2x00dev, 68, 0x0b); - - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x13); - rt2800_bbp_write(rt2x00dev, 75, 0x46); - rt2800_bbp_write(rt2x00dev, 76, 0x28); - - rt2800_bbp_write(rt2x00dev, 77, 0x59); - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 78, 0x0e); - rt2800_bbp_write(rt2x00dev, 80, 0x08); - rt2800_bbp_write(rt2x00dev, 81, 0x37); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x6a); - - rt2800_bbp_write(rt2x00dev, 84, 0x99); - - rt2800_bbp_write(rt2x00dev, 86, 0x38); - - rt2800_bbp_write(rt2x00dev, 88, 0x90); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x02); - - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - - rt2800_bbp_write(rt2x00dev, 104, 0x92); - - rt2800_bbp_write(rt2x00dev, 105, 0x34); - - rt2800_bbp_write(rt2x00dev, 106, 0x05); - - rt2800_bbp_write(rt2x00dev, 120, 0x50); - - rt2800_bbp_write(rt2x00dev, 137, 0x0f); - - rt2800_bbp_write(rt2x00dev, 163, 0xbd); - /* Set ITxBF timeout to 0x9c40=1000msec */ - rt2800_bbp_write(rt2x00dev, 179, 0x02); - rt2800_bbp_write(rt2x00dev, 180, 0x00); - rt2800_bbp_write(rt2x00dev, 182, 0x40); - rt2800_bbp_write(rt2x00dev, 180, 0x01); - rt2800_bbp_write(rt2x00dev, 182, 0x9c); - rt2800_bbp_write(rt2x00dev, 179, 0x00); - /* Reprogram the inband interface to put right values in RXWI */ - rt2800_bbp_write(rt2x00dev, 142, 0x04); - rt2800_bbp_write(rt2x00dev, 143, 0x3b); - rt2800_bbp_write(rt2x00dev, 142, 0x06); - rt2800_bbp_write(rt2x00dev, 143, 0xa0); - rt2800_bbp_write(rt2x00dev, 142, 0x07); - rt2800_bbp_write(rt2x00dev, 143, 0xa1); - rt2800_bbp_write(rt2x00dev, 142, 0x08); - rt2800_bbp_write(rt2x00dev, 143, 0xa2); - - rt2800_bbp_write(rt2x00dev, 148, 0xc8); -} - -static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x10); - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 79, 0x13); - rt2800_bbp_write(rt2x00dev, 80, 0x05); - rt2800_bbp_write(rt2x00dev, 81, 0x33); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x6a); - - rt2800_bbp_write(rt2x00dev, 84, 0x99); - - rt2800_bbp_write(rt2x00dev, 86, 0x00); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x00); - - if (rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E)) - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - else - rt2800_bbp_write(rt2x00dev, 103, 0x00); - - rt2800_bbp_write(rt2x00dev, 105, 0x05); - - rt2800_bbp_write(rt2x00dev, 106, 0x35); - - rt2800_disable_unused_dac_adc(rt2x00dev); -} - -static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev) -{ - rt2800_bbp_write(rt2x00dev, 31, 0x08); - - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x10); - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 79, 0x13); - rt2800_bbp_write(rt2x00dev, 80, 0x05); - rt2800_bbp_write(rt2x00dev, 81, 0x33); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x6a); - - rt2800_bbp_write(rt2x00dev, 84, 0x99); - - rt2800_bbp_write(rt2x00dev, 86, 0x00); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x00); - - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - - rt2800_bbp_write(rt2x00dev, 105, 0x05); - - rt2800_bbp_write(rt2x00dev, 106, 0x35); - - rt2800_disable_unused_dac_adc(rt2x00dev); -} - -static void rt2800_init_bbp_3593(struct rt2x00_dev *rt2x00dev) -{ - rt2800_init_bbp_early(rt2x00dev); - - rt2800_bbp_write(rt2x00dev, 79, 0x13); - rt2800_bbp_write(rt2x00dev, 80, 0x05); - rt2800_bbp_write(rt2x00dev, 81, 0x33); - rt2800_bbp_write(rt2x00dev, 137, 0x0f); - - rt2800_bbp_write(rt2x00dev, 84, 0x19); - - /* Enable DC filter */ - if (rt2x00_rt_rev_gte(rt2x00dev, RT3593, REV_RT3593E)) - rt2800_bbp_write(rt2x00dev, 103, 0xc0); -} - -static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) -{ - int ant, div_mode; - u16 eeprom; - u8 value; - - rt2800_bbp4_mac_if_ctrl(rt2x00dev); - - rt2800_bbp_write(rt2x00dev, 31, 0x08); - - rt2800_bbp_write(rt2x00dev, 65, 0x2c); - rt2800_bbp_write(rt2x00dev, 66, 0x38); - - rt2800_bbp_write(rt2x00dev, 68, 0x0b); - - rt2800_bbp_write(rt2x00dev, 69, 0x12); - rt2800_bbp_write(rt2x00dev, 73, 0x13); - rt2800_bbp_write(rt2x00dev, 75, 0x46); - rt2800_bbp_write(rt2x00dev, 76, 0x28); - - rt2800_bbp_write(rt2x00dev, 77, 0x59); - - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - - rt2800_bbp_write(rt2x00dev, 79, 0x13); - rt2800_bbp_write(rt2x00dev, 80, 0x05); - rt2800_bbp_write(rt2x00dev, 81, 0x33); - - rt2800_bbp_write(rt2x00dev, 82, 0x62); - - rt2800_bbp_write(rt2x00dev, 83, 0x7a); - - rt2800_bbp_write(rt2x00dev, 84, 0x9a); - - rt2800_bbp_write(rt2x00dev, 86, 0x38); - - if (rt2x00_rt(rt2x00dev, RT5392)) - rt2800_bbp_write(rt2x00dev, 88, 0x90); - - rt2800_bbp_write(rt2x00dev, 91, 0x04); - - rt2800_bbp_write(rt2x00dev, 92, 0x02); - - if (rt2x00_rt(rt2x00dev, RT5392)) { - rt2800_bbp_write(rt2x00dev, 95, 0x9a); - rt2800_bbp_write(rt2x00dev, 98, 0x12); - } - - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - - rt2800_bbp_write(rt2x00dev, 104, 0x92); - - rt2800_bbp_write(rt2x00dev, 105, 0x3c); - - if (rt2x00_rt(rt2x00dev, RT5390)) - rt2800_bbp_write(rt2x00dev, 106, 0x03); - else if (rt2x00_rt(rt2x00dev, RT5392)) - rt2800_bbp_write(rt2x00dev, 106, 0x12); - else - WARN_ON(1); - - rt2800_bbp_write(rt2x00dev, 128, 0x12); - - if (rt2x00_rt(rt2x00dev, RT5392)) { - rt2800_bbp_write(rt2x00dev, 134, 0xd0); - rt2800_bbp_write(rt2x00dev, 135, 0xf6); - } - - rt2800_disable_unused_dac_adc(rt2x00dev); - - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); - div_mode = rt2x00_get_field16(eeprom, - EEPROM_NIC_CONF1_ANT_DIVERSITY); - ant = (div_mode == 3) ? 1 : 0; - - /* check if this is a Bluetooth combo card */ - if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { - u32 reg; - - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0); - rt2x00_set_field32(®, GPIO_CTRL_DIR6, 0); - rt2x00_set_field32(®, GPIO_CTRL_VAL3, 0); - rt2x00_set_field32(®, GPIO_CTRL_VAL6, 0); - if (ant == 0) - rt2x00_set_field32(®, GPIO_CTRL_VAL3, 1); - else if (ant == 1) - rt2x00_set_field32(®, GPIO_CTRL_VAL6, 1); - rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); - } - - /* This chip has hardware antenna diversity*/ - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) { - rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */ - rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */ - rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */ - } - - rt2800_bbp_read(rt2x00dev, 152, &value); - if (ant == 0) - rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1); - else - rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0); - rt2800_bbp_write(rt2x00dev, 152, value); - - rt2800_init_freq_calibration(rt2x00dev); -} - -static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev) -{ - int ant, div_mode; - u16 eeprom; - u8 value; - - rt2800_init_bbp_early(rt2x00dev); - - rt2800_bbp_read(rt2x00dev, 105, &value); - rt2x00_set_field8(&value, BBP105_MLD, - rt2x00dev->default_ant.rx_chain_num == 2); - rt2800_bbp_write(rt2x00dev, 105, value); - - rt2800_bbp4_mac_if_ctrl(rt2x00dev); - - rt2800_bbp_write(rt2x00dev, 20, 0x06); - rt2800_bbp_write(rt2x00dev, 31, 0x08); - rt2800_bbp_write(rt2x00dev, 65, 0x2C); - rt2800_bbp_write(rt2x00dev, 68, 0xDD); - rt2800_bbp_write(rt2x00dev, 69, 0x1A); - rt2800_bbp_write(rt2x00dev, 70, 0x05); - rt2800_bbp_write(rt2x00dev, 73, 0x13); - rt2800_bbp_write(rt2x00dev, 74, 0x0F); - rt2800_bbp_write(rt2x00dev, 75, 0x4F); - rt2800_bbp_write(rt2x00dev, 76, 0x28); - rt2800_bbp_write(rt2x00dev, 77, 0x59); - rt2800_bbp_write(rt2x00dev, 84, 0x9A); - rt2800_bbp_write(rt2x00dev, 86, 0x38); - rt2800_bbp_write(rt2x00dev, 88, 0x90); - rt2800_bbp_write(rt2x00dev, 91, 0x04); - rt2800_bbp_write(rt2x00dev, 92, 0x02); - rt2800_bbp_write(rt2x00dev, 95, 0x9a); - rt2800_bbp_write(rt2x00dev, 98, 0x12); - rt2800_bbp_write(rt2x00dev, 103, 0xC0); - rt2800_bbp_write(rt2x00dev, 104, 0x92); - /* FIXME BBP105 owerwrite */ - rt2800_bbp_write(rt2x00dev, 105, 0x3C); - rt2800_bbp_write(rt2x00dev, 106, 0x35); - rt2800_bbp_write(rt2x00dev, 128, 0x12); - rt2800_bbp_write(rt2x00dev, 134, 0xD0); - rt2800_bbp_write(rt2x00dev, 135, 0xF6); - rt2800_bbp_write(rt2x00dev, 137, 0x0F); - - /* Initialize GLRT (Generalized Likehood Radio Test) */ - rt2800_init_bbp_5592_glrt(rt2x00dev); - - rt2800_bbp4_mac_if_ctrl(rt2x00dev); - - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); - div_mode = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_ANT_DIVERSITY); - ant = (div_mode == 3) ? 1 : 0; - rt2800_bbp_read(rt2x00dev, 152, &value); - if (ant == 0) { - /* Main antenna */ - rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1); - } else { - /* Auxiliary antenna */ - rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0); - } - rt2800_bbp_write(rt2x00dev, 152, value); - - if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) { - rt2800_bbp_read(rt2x00dev, 254, &value); - rt2x00_set_field8(&value, BBP254_BIT7, 1); - rt2800_bbp_write(rt2x00dev, 254, value); - } - - rt2800_init_freq_calibration(rt2x00dev); - - rt2800_bbp_write(rt2x00dev, 84, 0x19); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) - rt2800_bbp_write(rt2x00dev, 103, 0xc0); -} - -static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (rt2800_is_305x_soc(rt2x00dev)) - rt2800_init_bbp_305x_soc(rt2x00dev); - - switch (rt2x00dev->chip.rt) { - case RT2860: - case RT2872: - case RT2883: - rt2800_init_bbp_28xx(rt2x00dev); - break; - case RT3070: - case RT3071: - case RT3090: - rt2800_init_bbp_30xx(rt2x00dev); - break; - case RT3290: - rt2800_init_bbp_3290(rt2x00dev); - break; - case RT3352: - rt2800_init_bbp_3352(rt2x00dev); - break; - case RT3390: - rt2800_init_bbp_3390(rt2x00dev); - break; - case RT3572: - rt2800_init_bbp_3572(rt2x00dev); - break; - case RT3593: - rt2800_init_bbp_3593(rt2x00dev); - return; - case RT5390: - case RT5392: - rt2800_init_bbp_53xx(rt2x00dev); - break; - case RT5592: - rt2800_init_bbp_5592(rt2x00dev); - return; - } - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_BBP_START, i, - &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2800_bbp_write(rt2x00dev, reg_id, value); - } - } -} - -static void rt2800_led_open_drain_enable(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, OPT_14_CSR, ®); - rt2x00_set_field32(®, OPT_14_CSR_BIT0, 1); - rt2800_register_write(rt2x00dev, OPT_14_CSR, reg); -} - -static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40, - u8 filter_target) -{ - unsigned int i; - u8 bbp; - u8 rfcsr; - u8 passband; - u8 stopband; - u8 overtuned = 0; - u8 rfcsr24 = (bw40) ? 0x27 : 0x07; - - rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); - - rt2800_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); - rt2800_bbp_write(rt2x00dev, 4, bbp); - - rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR31_RX_H20M, bw40); - rt2800_rfcsr_write(rt2x00dev, 31, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); - rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * Set power & frequency of passband test tone - */ - rt2800_bbp_write(rt2x00dev, 24, 0); - - for (i = 0; i < 100; i++) { - rt2800_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800_bbp_read(rt2x00dev, 55, &passband); - if (passband) - break; - } - - /* - * Set power & frequency of stopband test tone - */ - rt2800_bbp_write(rt2x00dev, 24, 0x06); - - for (i = 0; i < 100; i++) { - rt2800_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800_bbp_read(rt2x00dev, 55, &stopband); - - if ((passband - stopband) <= filter_target) { - rfcsr24++; - overtuned += ((passband - stopband) == filter_target); - } else - break; - - rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); - } - - rfcsr24 -= !!overtuned; - - rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); - return rfcsr24; -} - -static void rt2800_rf_init_calibration(struct rt2x00_dev *rt2x00dev, - const unsigned int rf_reg) -{ - u8 rfcsr; - - rt2800_rfcsr_read(rt2x00dev, rf_reg, &rfcsr); - rt2x00_set_field8(&rfcsr, FIELD8(0x80), 1); - rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, FIELD8(0x80), 0); - rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr); -} - -static void rt2800_rx_filter_calibration(struct rt2x00_dev *rt2x00dev) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u8 filter_tgt_bw20; - u8 filter_tgt_bw40; - u8 rfcsr, bbp; - - /* - * TODO: sync filter_tgt values with vendor driver - */ - if (rt2x00_rt(rt2x00dev, RT3070)) { - filter_tgt_bw20 = 0x16; - filter_tgt_bw40 = 0x19; - } else { - filter_tgt_bw20 = 0x13; - filter_tgt_bw40 = 0x15; - } - - drv_data->calibration_bw20 = - rt2800_init_rx_filter(rt2x00dev, false, filter_tgt_bw20); - drv_data->calibration_bw40 = - rt2800_init_rx_filter(rt2x00dev, true, filter_tgt_bw40); - - /* - * Save BBP 25 & 26 values for later use in channel switching (for 3052) - */ - rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25); - rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26); - - /* - * Set back to initial state - */ - rt2800_bbp_write(rt2x00dev, 24, 0); - - rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); - rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * Set BBP back to BW20 - */ - rt2800_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); - rt2800_bbp_write(rt2x00dev, 4, bbp); -} - -static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u8 min_gain, rfcsr, bbp; - u16 eeprom; - - rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); - - rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0); - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || - rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || - rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { - if (!rt2x00_has_cap_external_lna_bg(rt2x00dev)) - rt2x00_set_field8(&rfcsr, RFCSR17_R, 1); - } - - min_gain = rt2x00_rt(rt2x00dev, RT3070) ? 1 : 2; - if (drv_data->txmixer_gain_24g >= min_gain) { - rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN, - drv_data->txmixer_gain_24g); - } - - rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); - - if (rt2x00_rt(rt2x00dev, RT3090)) { - /* Turn off unused DAC1 and ADC1 to reduce power consumption */ - rt2800_bbp_read(rt2x00dev, 138, &bbp); - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) - rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) - rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1); - rt2800_bbp_write(rt2x00dev, 138, bbp); - } - - if (rt2x00_rt(rt2x00dev, RT3070)) { - rt2800_rfcsr_read(rt2x00dev, 27, &rfcsr); - if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) - rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3); - else - rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0); - rt2x00_set_field8(&rfcsr, RFCSR27_R2, 0); - rt2x00_set_field8(&rfcsr, RFCSR27_R3, 0); - rt2x00_set_field8(&rfcsr, RFCSR27_R4, 0); - rt2800_rfcsr_write(rt2x00dev, 27, rfcsr); - } else if (rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3090) || - rt2x00_rt(rt2x00dev, RT3390)) { - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); - rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 15, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR15_TX_LO2_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 15, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR20_RX_LO1_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR21_RX_LO2_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 21, rfcsr); - } -} - -static void rt2800_normal_mode_setup_3593(struct rt2x00_dev *rt2x00dev) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u8 rfcsr; - u8 tx_gain; - - rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO2_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr); - tx_gain = rt2x00_get_field8(drv_data->txmixer_gain_24g, - RFCSR17_TXMIXER_GAIN); - rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, tx_gain); - rt2800_rfcsr_write(rt2x00dev, 51, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 38, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 39, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); - rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); - rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - - /* TODO: enable stream mode */ -} - -static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev) -{ - u8 reg; - u16 eeprom; - - /* Turn off unused DAC1 and ADC1 to reduce power consumption */ - rt2800_bbp_read(rt2x00dev, 138, ®); - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) - rt2x00_set_field8(®, BBP138_RX_ADC1, 0); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) - rt2x00_set_field8(®, BBP138_TX_DAC1, 1); - rt2800_bbp_write(rt2x00dev, 138, reg); - - rt2800_rfcsr_read(rt2x00dev, 38, ®); - rt2x00_set_field8(®, RFCSR38_RX_LO1_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 38, reg); - - rt2800_rfcsr_read(rt2x00dev, 39, ®); - rt2x00_set_field8(®, RFCSR39_RX_LO2_EN, 0); - rt2800_rfcsr_write(rt2x00dev, 39, reg); - - rt2800_bbp4_mac_if_ctrl(rt2x00dev); - - rt2800_rfcsr_read(rt2x00dev, 30, ®); - rt2x00_set_field8(®, RFCSR30_RX_VCM, 2); - rt2800_rfcsr_write(rt2x00dev, 30, reg); -} - -static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev) -{ - rt2800_rf_init_calibration(rt2x00dev, 30); - - rt2800_rfcsr_write(rt2x00dev, 0, 0x50); - rt2800_rfcsr_write(rt2x00dev, 1, 0x01); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); - rt2800_rfcsr_write(rt2x00dev, 3, 0x75); - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800_rfcsr_write(rt2x00dev, 7, 0x50); - rt2800_rfcsr_write(rt2x00dev, 8, 0x39); - rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 10, 0x60); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x75); - rt2800_rfcsr_write(rt2x00dev, 13, 0x75); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x31); - rt2800_rfcsr_write(rt2x00dev, 24, 0x08); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800_rfcsr_write(rt2x00dev, 26, 0x25); - rt2800_rfcsr_write(rt2x00dev, 27, 0x23); - rt2800_rfcsr_write(rt2x00dev, 28, 0x13); - rt2800_rfcsr_write(rt2x00dev, 29, 0x83); - rt2800_rfcsr_write(rt2x00dev, 30, 0x00); - rt2800_rfcsr_write(rt2x00dev, 31, 0x00); -} - -static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev) -{ - u8 rfcsr; - u16 eeprom; - u32 reg; - - /* XXX vendor driver do this only for 3070 */ - rt2800_rf_init_calibration(rt2x00dev, 30); - - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800_rfcsr_write(rt2x00dev, 7, 0x60); - rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 10, 0x41); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x03); - rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); - - if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { - rt2800_register_read(rt2x00dev, LDO_CFG0, ®); - rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); - rt2800_register_write(rt2x00dev, LDO_CFG0, reg); - } else if (rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3090)) { - rt2800_rfcsr_write(rt2x00dev, 31, 0x14); - - rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1); - rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800_register_read(rt2x00dev, LDO_CFG0, ®); - rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); - if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || - rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, - &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST)) - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); - else - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); - } - rt2800_register_write(rt2x00dev, LDO_CFG0, reg); - - rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®); - rt2x00_set_field32(®, GPIO_SWITCH_5, 0); - rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); - } - - rt2800_rx_filter_calibration(rt2x00dev); - - if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) || - rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || - rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) - rt2800_rfcsr_write(rt2x00dev, 27, 0x03); - - rt2800_led_open_drain_enable(rt2x00dev); - rt2800_normal_mode_setup_3xxx(rt2x00dev); -} - -static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev) -{ - u8 rfcsr; - - rt2800_rf_init_calibration(rt2x00dev, 2); - - rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x08); - rt2800_rfcsr_write(rt2x00dev, 4, 0x00); - rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 8, 0xf3); - rt2800_rfcsr_write(rt2x00dev, 9, 0x02); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0x46); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 18, 0x02); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 25, 0x83); - rt2800_rfcsr_write(rt2x00dev, 26, 0x82); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x05); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 38, 0x85); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); - rt2800_rfcsr_write(rt2x00dev, 43, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - rt2800_rfcsr_write(rt2x00dev, 47, 0x00); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x98); - rt2800_rfcsr_write(rt2x00dev, 52, 0x38); - rt2800_rfcsr_write(rt2x00dev, 53, 0x00); - rt2800_rfcsr_write(rt2x00dev, 54, 0x78); - rt2800_rfcsr_write(rt2x00dev, 55, 0x43); - rt2800_rfcsr_write(rt2x00dev, 56, 0x02); - rt2800_rfcsr_write(rt2x00dev, 57, 0x80); - rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x09); - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - rt2800_rfcsr_write(rt2x00dev, 61, 0xc1); - - rt2800_rfcsr_read(rt2x00dev, 29, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR29_RSSI_GAIN, 3); - rt2800_rfcsr_write(rt2x00dev, 29, rfcsr); - - rt2800_led_open_drain_enable(rt2x00dev); - rt2800_normal_mode_setup_3xxx(rt2x00dev); -} - -static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev) -{ - rt2800_rf_init_calibration(rt2x00dev, 30); - - rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); - rt2800_rfcsr_write(rt2x00dev, 1, 0x23); - rt2800_rfcsr_write(rt2x00dev, 2, 0x50); - rt2800_rfcsr_write(rt2x00dev, 3, 0x18); - rt2800_rfcsr_write(rt2x00dev, 4, 0x00); - rt2800_rfcsr_write(rt2x00dev, 5, 0x00); - rt2800_rfcsr_write(rt2x00dev, 6, 0x33); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 9, 0x02); - rt2800_rfcsr_write(rt2x00dev, 10, 0xd2); - rt2800_rfcsr_write(rt2x00dev, 11, 0x42); - rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); - rt2800_rfcsr_write(rt2x00dev, 13, 0x00); - rt2800_rfcsr_write(rt2x00dev, 14, 0x5a); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x01); - rt2800_rfcsr_write(rt2x00dev, 18, 0x45); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x00); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x00); - rt2800_rfcsr_write(rt2x00dev, 24, 0x00); - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - rt2800_rfcsr_write(rt2x00dev, 26, 0x00); - rt2800_rfcsr_write(rt2x00dev, 27, 0x03); - rt2800_rfcsr_write(rt2x00dev, 28, 0x03); - rt2800_rfcsr_write(rt2x00dev, 29, 0x00); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x01); - rt2800_rfcsr_write(rt2x00dev, 35, 0x03); - rt2800_rfcsr_write(rt2x00dev, 36, 0xbd); - rt2800_rfcsr_write(rt2x00dev, 37, 0x3c); - rt2800_rfcsr_write(rt2x00dev, 38, 0x5f); - rt2800_rfcsr_write(rt2x00dev, 39, 0xc5); - rt2800_rfcsr_write(rt2x00dev, 40, 0x33); - rt2800_rfcsr_write(rt2x00dev, 41, 0x5b); - rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); - rt2800_rfcsr_write(rt2x00dev, 43, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 44, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 45, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 46, 0xdd); - rt2800_rfcsr_write(rt2x00dev, 47, 0x0d); - rt2800_rfcsr_write(rt2x00dev, 48, 0x14); - rt2800_rfcsr_write(rt2x00dev, 49, 0x00); - rt2800_rfcsr_write(rt2x00dev, 50, 0x2d); - rt2800_rfcsr_write(rt2x00dev, 51, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 52, 0x00); - rt2800_rfcsr_write(rt2x00dev, 53, 0x52); - rt2800_rfcsr_write(rt2x00dev, 54, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 55, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 56, 0x00); - rt2800_rfcsr_write(rt2x00dev, 57, 0x52); - rt2800_rfcsr_write(rt2x00dev, 58, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 59, 0x00); - rt2800_rfcsr_write(rt2x00dev, 60, 0x00); - rt2800_rfcsr_write(rt2x00dev, 61, 0x00); - rt2800_rfcsr_write(rt2x00dev, 62, 0x00); - rt2800_rfcsr_write(rt2x00dev, 63, 0x00); - - rt2800_rx_filter_calibration(rt2x00dev); - rt2800_led_open_drain_enable(rt2x00dev); - rt2800_normal_mode_setup_3xxx(rt2x00dev); -} - -static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2800_rf_init_calibration(rt2x00dev, 30); - - rt2800_rfcsr_write(rt2x00dev, 0, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 1, 0xe1); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 3, 0x62); - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x8b); - rt2800_rfcsr_write(rt2x00dev, 6, 0x42); - rt2800_rfcsr_write(rt2x00dev, 7, 0x34); - rt2800_rfcsr_write(rt2x00dev, 8, 0x00); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); - rt2800_rfcsr_write(rt2x00dev, 10, 0x61); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x3b); - rt2800_rfcsr_write(rt2x00dev, 13, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x53); - rt2800_rfcsr_write(rt2x00dev, 16, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 17, 0x94); - rt2800_rfcsr_write(rt2x00dev, 18, 0x5c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 20, 0xb2); - rt2800_rfcsr_write(rt2x00dev, 21, 0xf6); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x14); - rt2800_rfcsr_write(rt2x00dev, 24, 0x08); - rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); - rt2800_rfcsr_write(rt2x00dev, 26, 0x85); - rt2800_rfcsr_write(rt2x00dev, 27, 0x00); - rt2800_rfcsr_write(rt2x00dev, 28, 0x41); - rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); - rt2800_rfcsr_write(rt2x00dev, 30, 0x20); - rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); - - rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®); - rt2x00_set_field32(®, GPIO_SWITCH_5, 0); - rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); - - rt2800_rx_filter_calibration(rt2x00dev); - - if (rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) - rt2800_rfcsr_write(rt2x00dev, 27, 0x03); - - rt2800_led_open_drain_enable(rt2x00dev); - rt2800_normal_mode_setup_3xxx(rt2x00dev); -} - -static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev) -{ - u8 rfcsr; - u32 reg; - - rt2800_rf_init_calibration(rt2x00dev, 30); - - rt2800_rfcsr_write(rt2x00dev, 0, 0x70); - rt2800_rfcsr_write(rt2x00dev, 1, 0x81); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 3, 0x02); - rt2800_rfcsr_write(rt2x00dev, 4, 0x4c); - rt2800_rfcsr_write(rt2x00dev, 5, 0x05); - rt2800_rfcsr_write(rt2x00dev, 6, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); - rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); - rt2800_rfcsr_write(rt2x00dev, 12, 0x70); - rt2800_rfcsr_write(rt2x00dev, 13, 0x65); - rt2800_rfcsr_write(rt2x00dev, 14, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 15, 0x53); - rt2800_rfcsr_write(rt2x00dev, 16, 0x4c); - rt2800_rfcsr_write(rt2x00dev, 17, 0x23); - rt2800_rfcsr_write(rt2x00dev, 18, 0xac); - rt2800_rfcsr_write(rt2x00dev, 19, 0x93); - rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 21, 0xd0); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x3c); - rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x15); - rt2800_rfcsr_write(rt2x00dev, 26, 0x85); - rt2800_rfcsr_write(rt2x00dev, 27, 0x00); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); - rt2800_rfcsr_write(rt2x00dev, 30, 0x09); - rt2800_rfcsr_write(rt2x00dev, 31, 0x10); - - rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1); - rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800_register_read(rt2x00dev, LDO_CFG0, ®); - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); - rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); - rt2800_register_write(rt2x00dev, LDO_CFG0, reg); - msleep(1); - rt2800_register_read(rt2x00dev, LDO_CFG0, ®); - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); - rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); - rt2800_register_write(rt2x00dev, LDO_CFG0, reg); - - rt2800_rx_filter_calibration(rt2x00dev); - rt2800_led_open_drain_enable(rt2x00dev); - rt2800_normal_mode_setup_3xxx(rt2x00dev); -} - -static void rt3593_post_bbp_init(struct rt2x00_dev *rt2x00dev) -{ - u8 bbp; - bool txbf_enabled = false; /* FIXME */ - - rt2800_bbp_read(rt2x00dev, 105, &bbp); - if (rt2x00dev->default_ant.rx_chain_num == 1) - rt2x00_set_field8(&bbp, BBP105_MLD, 0); - else - rt2x00_set_field8(&bbp, BBP105_MLD, 1); - rt2800_bbp_write(rt2x00dev, 105, bbp); - - rt2800_bbp4_mac_if_ctrl(rt2x00dev); - - rt2800_bbp_write(rt2x00dev, 92, 0x02); - rt2800_bbp_write(rt2x00dev, 82, 0x82); - rt2800_bbp_write(rt2x00dev, 106, 0x05); - rt2800_bbp_write(rt2x00dev, 104, 0x92); - rt2800_bbp_write(rt2x00dev, 88, 0x90); - rt2800_bbp_write(rt2x00dev, 148, 0xc8); - rt2800_bbp_write(rt2x00dev, 47, 0x48); - rt2800_bbp_write(rt2x00dev, 120, 0x50); - - if (txbf_enabled) - rt2800_bbp_write(rt2x00dev, 163, 0xbd); - else - rt2800_bbp_write(rt2x00dev, 163, 0x9d); - - /* SNR mapping */ - rt2800_bbp_write(rt2x00dev, 142, 6); - rt2800_bbp_write(rt2x00dev, 143, 160); - rt2800_bbp_write(rt2x00dev, 142, 7); - rt2800_bbp_write(rt2x00dev, 143, 161); - rt2800_bbp_write(rt2x00dev, 142, 8); - rt2800_bbp_write(rt2x00dev, 143, 162); - - /* ADC/DAC control */ - rt2800_bbp_write(rt2x00dev, 31, 0x08); - - /* RX AGC energy lower bound in log2 */ - rt2800_bbp_write(rt2x00dev, 68, 0x0b); - - /* FIXME: BBP 105 owerwrite? */ - rt2800_bbp_write(rt2x00dev, 105, 0x04); - -} - -static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u32 reg; - u8 rfcsr; - - /* Disable GPIO #4 and #7 function for LAN PE control */ - rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®); - rt2x00_set_field32(®, GPIO_SWITCH_4, 0); - rt2x00_set_field32(®, GPIO_SWITCH_7, 0); - rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); - - /* Initialize default register values */ - rt2800_rfcsr_write(rt2x00dev, 1, 0x03); - rt2800_rfcsr_write(rt2x00dev, 3, 0x80); - rt2800_rfcsr_write(rt2x00dev, 5, 0x00); - rt2800_rfcsr_write(rt2x00dev, 6, 0x40); - rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 9, 0x02); - rt2800_rfcsr_write(rt2x00dev, 10, 0xd3); - rt2800_rfcsr_write(rt2x00dev, 11, 0x40); - rt2800_rfcsr_write(rt2x00dev, 12, 0x4e); - rt2800_rfcsr_write(rt2x00dev, 13, 0x12); - rt2800_rfcsr_write(rt2x00dev, 18, 0x40); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x78); - rt2800_rfcsr_write(rt2x00dev, 33, 0x3b); - rt2800_rfcsr_write(rt2x00dev, 34, 0x3c); - rt2800_rfcsr_write(rt2x00dev, 35, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 38, 0x86); - rt2800_rfcsr_write(rt2x00dev, 39, 0x23); - rt2800_rfcsr_write(rt2x00dev, 44, 0xd3); - rt2800_rfcsr_write(rt2x00dev, 45, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 46, 0x60); - rt2800_rfcsr_write(rt2x00dev, 49, 0x8e); - rt2800_rfcsr_write(rt2x00dev, 50, 0x86); - rt2800_rfcsr_write(rt2x00dev, 51, 0x75); - rt2800_rfcsr_write(rt2x00dev, 52, 0x45); - rt2800_rfcsr_write(rt2x00dev, 53, 0x18); - rt2800_rfcsr_write(rt2x00dev, 54, 0x18); - rt2800_rfcsr_write(rt2x00dev, 55, 0x18); - rt2800_rfcsr_write(rt2x00dev, 56, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 57, 0x6e); - - /* Initiate calibration */ - /* TODO: use rt2800_rf_init_calibration ? */ - rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1); - rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); - - rt2800_adjust_freq_offset(rt2x00dev); - - rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1); - rt2800_rfcsr_write(rt2x00dev, 18, rfcsr); - - rt2800_register_read(rt2x00dev, LDO_CFG0, ®); - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); - rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); - rt2800_register_write(rt2x00dev, LDO_CFG0, reg); - usleep_range(1000, 1500); - rt2800_register_read(rt2x00dev, LDO_CFG0, ®); - rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); - rt2800_register_write(rt2x00dev, LDO_CFG0, reg); - - /* Set initial values for RX filter calibration */ - drv_data->calibration_bw20 = 0x1f; - drv_data->calibration_bw40 = 0x2f; - - /* Save BBP 25 & 26 values for later use in channel switching */ - rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25); - rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26); - - rt2800_led_open_drain_enable(rt2x00dev); - rt2800_normal_mode_setup_3593(rt2x00dev); - - rt3593_post_bbp_init(rt2x00dev); - - /* TODO: enable stream mode support */ -} - -static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) -{ - rt2800_rf_init_calibration(rt2x00dev, 2); - - rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x88); - rt2800_rfcsr_write(rt2x00dev, 5, 0x10); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); - else - rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0x46); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 14, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x00); - rt2800_rfcsr_write(rt2x00dev, 18, 0x03); - rt2800_rfcsr_write(rt2x00dev, 19, 0x00); - - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x00); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 23, 0x00); - rt2800_rfcsr_write(rt2x00dev, 24, 0x00); - if (rt2x00_is_usb(rt2x00dev) && - rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - else - rt2800_rfcsr_write(rt2x00dev, 25, 0xc0); - rt2800_rfcsr_write(rt2x00dev, 26, 0x00); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x07); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 37, 0x08); - rt2800_rfcsr_write(rt2x00dev, 38, 0x85); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - - rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd2); - rt2800_rfcsr_write(rt2x00dev, 43, 0x9a); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - else - rt2800_rfcsr_write(rt2x00dev, 46, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 47, 0x00); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x94); - - rt2800_rfcsr_write(rt2x00dev, 52, 0x38); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 53, 0x00); - else - rt2800_rfcsr_write(rt2x00dev, 53, 0x84); - rt2800_rfcsr_write(rt2x00dev, 54, 0x78); - rt2800_rfcsr_write(rt2x00dev, 55, 0x44); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 56, 0x42); - else - rt2800_rfcsr_write(rt2x00dev, 56, 0x22); - rt2800_rfcsr_write(rt2x00dev, 57, 0x80); - rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x8f); - - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { - if (rt2x00_is_usb(rt2x00dev)) - rt2800_rfcsr_write(rt2x00dev, 61, 0xd1); - else - rt2800_rfcsr_write(rt2x00dev, 61, 0xd5); - } else { - if (rt2x00_is_usb(rt2x00dev)) - rt2800_rfcsr_write(rt2x00dev, 61, 0xdd); - else - rt2800_rfcsr_write(rt2x00dev, 61, 0xb5); - } - rt2800_rfcsr_write(rt2x00dev, 62, 0x00); - rt2800_rfcsr_write(rt2x00dev, 63, 0x00); - - rt2800_normal_mode_setup_5xxx(rt2x00dev); - - rt2800_led_open_drain_enable(rt2x00dev); -} - -static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) -{ - rt2800_rf_init_calibration(rt2x00dev, 2); - - rt2800_rfcsr_write(rt2x00dev, 1, 0x17); - rt2800_rfcsr_write(rt2x00dev, 3, 0x88); - rt2800_rfcsr_write(rt2x00dev, 5, 0x10); - rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0x46); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 14, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x00); - rt2800_rfcsr_write(rt2x00dev, 18, 0x03); - rt2800_rfcsr_write(rt2x00dev, 19, 0x4d); - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x8d); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 23, 0x0b); - rt2800_rfcsr_write(rt2x00dev, 24, 0x44); - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - rt2800_rfcsr_write(rt2x00dev, 26, 0x82); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x20); - rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); - rt2800_rfcsr_write(rt2x00dev, 34, 0x07); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 37, 0x08); - rt2800_rfcsr_write(rt2x00dev, 38, 0x89); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 40, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); - rt2800_rfcsr_write(rt2x00dev, 43, 0x9b); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - rt2800_rfcsr_write(rt2x00dev, 47, 0x0c); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x94); - rt2800_rfcsr_write(rt2x00dev, 50, 0x94); - rt2800_rfcsr_write(rt2x00dev, 51, 0x3a); - rt2800_rfcsr_write(rt2x00dev, 52, 0x48); - rt2800_rfcsr_write(rt2x00dev, 53, 0x44); - rt2800_rfcsr_write(rt2x00dev, 54, 0x38); - rt2800_rfcsr_write(rt2x00dev, 55, 0x43); - rt2800_rfcsr_write(rt2x00dev, 56, 0xa1); - rt2800_rfcsr_write(rt2x00dev, 57, 0x00); - rt2800_rfcsr_write(rt2x00dev, 58, 0x39); - rt2800_rfcsr_write(rt2x00dev, 59, 0x07); - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - rt2800_rfcsr_write(rt2x00dev, 61, 0x91); - rt2800_rfcsr_write(rt2x00dev, 62, 0x39); - rt2800_rfcsr_write(rt2x00dev, 63, 0x07); - - rt2800_normal_mode_setup_5xxx(rt2x00dev); - - rt2800_led_open_drain_enable(rt2x00dev); -} - -static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev) -{ - rt2800_rf_init_calibration(rt2x00dev, 30); - - rt2800_rfcsr_write(rt2x00dev, 1, 0x3F); - rt2800_rfcsr_write(rt2x00dev, 3, 0x08); - rt2800_rfcsr_write(rt2x00dev, 5, 0x10); - rt2800_rfcsr_write(rt2x00dev, 6, 0xE4); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 14, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x00); - rt2800_rfcsr_write(rt2x00dev, 18, 0x03); - rt2800_rfcsr_write(rt2x00dev, 19, 0x4D); - rt2800_rfcsr_write(rt2x00dev, 20, 0x10); - rt2800_rfcsr_write(rt2x00dev, 21, 0x8D); - rt2800_rfcsr_write(rt2x00dev, 26, 0x82); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); - rt2800_rfcsr_write(rt2x00dev, 34, 0x07); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 47, 0x0C); - rt2800_rfcsr_write(rt2x00dev, 53, 0x22); - rt2800_rfcsr_write(rt2x00dev, 63, 0x07); - - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - msleep(1); - - rt2800_adjust_freq_offset(rt2x00dev); - - /* Enable DC filter */ - if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - - rt2800_normal_mode_setup_5xxx(rt2x00dev); - - if (rt2x00_rt_rev_lt(rt2x00dev, RT5592, REV_RT5592C)) - rt2800_rfcsr_write(rt2x00dev, 27, 0x03); - - rt2800_led_open_drain_enable(rt2x00dev); -} - -static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) -{ - if (rt2800_is_305x_soc(rt2x00dev)) { - rt2800_init_rfcsr_305x_soc(rt2x00dev); - return; - } - - switch (rt2x00dev->chip.rt) { - case RT3070: - case RT3071: - case RT3090: - rt2800_init_rfcsr_30xx(rt2x00dev); - break; - case RT3290: - rt2800_init_rfcsr_3290(rt2x00dev); - break; - case RT3352: - rt2800_init_rfcsr_3352(rt2x00dev); - break; - case RT3390: - rt2800_init_rfcsr_3390(rt2x00dev); - break; - case RT3572: - rt2800_init_rfcsr_3572(rt2x00dev); - break; - case RT3593: - rt2800_init_rfcsr_3593(rt2x00dev); - break; - case RT5390: - rt2800_init_rfcsr_5390(rt2x00dev); - break; - case RT5392: - rt2800_init_rfcsr_5392(rt2x00dev); - break; - case RT5592: - rt2800_init_rfcsr_5592(rt2x00dev); - break; - } -} - -int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 word; - - /* - * Initialize MAC registers. - */ - if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800_init_registers(rt2x00dev))) - return -EIO; - - /* - * Wait BBP/RF to wake up. - */ - if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev))) - return -EIO; - - /* - * Send signal during boot time to initialize firmware. - */ - rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - if (rt2x00_is_usb(rt2x00dev)) - rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0); - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); - msleep(1); - - /* - * Make sure BBP is up and running. - */ - if (unlikely(rt2800_wait_bbp_ready(rt2x00dev))) - return -EIO; - - /* - * Initialize BBP/RF registers. - */ - rt2800_init_bbp(rt2x00dev); - rt2800_init_rfcsr(rt2x00dev); - - if (rt2x00_is_usb(rt2x00dev) && - (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3572))) { - udelay(200); - rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); - udelay(10); - } - - /* - * Enable RX. - */ - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - udelay(50); - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - /* - * Initialize LED control - */ - rt2800_eeprom_read(rt2x00dev, EEPROM_LED_AG_CONF, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_AG_CONF, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2800_eeprom_read(rt2x00dev, EEPROM_LED_ACT_CONF, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_ACT_CONF, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2800_eeprom_read(rt2x00dev, EEPROM_LED_POLARITY, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff, - word & 0xff, (word >> 8) & 0xff); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_enable_radio); - -void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2800_disable_wpdma(rt2x00dev); - - /* Wait for DMA, ignore error */ - rt2800_wait_wpdma_ready(rt2x00dev); - - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 0); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); -} -EXPORT_SYMBOL_GPL(rt2800_disable_radio); - -int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 efuse_ctrl_reg; - - if (rt2x00_rt(rt2x00dev, RT3290)) - efuse_ctrl_reg = EFUSE_CTRL_3290; - else - efuse_ctrl_reg = EFUSE_CTRL; - - rt2800_register_read(rt2x00dev, efuse_ctrl_reg, ®); - return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT); -} -EXPORT_SYMBOL_GPL(rt2800_efuse_detect); - -static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) -{ - u32 reg; - u16 efuse_ctrl_reg; - u16 efuse_data0_reg; - u16 efuse_data1_reg; - u16 efuse_data2_reg; - u16 efuse_data3_reg; - - if (rt2x00_rt(rt2x00dev, RT3290)) { - efuse_ctrl_reg = EFUSE_CTRL_3290; - efuse_data0_reg = EFUSE_DATA0_3290; - efuse_data1_reg = EFUSE_DATA1_3290; - efuse_data2_reg = EFUSE_DATA2_3290; - efuse_data3_reg = EFUSE_DATA3_3290; - } else { - efuse_ctrl_reg = EFUSE_CTRL; - efuse_data0_reg = EFUSE_DATA0; - efuse_data1_reg = EFUSE_DATA1; - efuse_data2_reg = EFUSE_DATA2; - efuse_data3_reg = EFUSE_DATA3; - } - mutex_lock(&rt2x00dev->csr_mutex); - - rt2800_register_read_lock(rt2x00dev, efuse_ctrl_reg, ®); - rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); - rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); - rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); - rt2800_register_write_lock(rt2x00dev, efuse_ctrl_reg, reg); - - /* Wait until the EEPROM has been loaded */ - rt2800_regbusy_read(rt2x00dev, efuse_ctrl_reg, EFUSE_CTRL_KICK, ®); - /* Apparently the data is read from end to start */ - rt2800_register_read_lock(rt2x00dev, efuse_data3_reg, ®); - /* The returned value is in CPU order, but eeprom is le */ - *(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg); - rt2800_register_read_lock(rt2x00dev, efuse_data2_reg, ®); - *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg); - rt2800_register_read_lock(rt2x00dev, efuse_data1_reg, ®); - *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg); - rt2800_register_read_lock(rt2x00dev, efuse_data0_reg, ®); - *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - - for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) - rt2800_efuse_read(rt2x00dev, i); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); - -static u8 rt2800_get_txmixer_gain_24g(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - - if (rt2x00_rt(rt2x00dev, RT3593)) - return 0; - - rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word); - if ((word & 0x00ff) != 0x00ff) - return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL); - - return 0; -} - -static u8 rt2800_get_txmixer_gain_5g(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - - if (rt2x00_rt(rt2x00dev, RT3593)) - return 0; - - rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word); - if ((word & 0x00ff) != 0x00ff) - return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL); - - return 0; -} - -static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u16 word; - u8 *mac; - u8 default_lna_gain; - int retval; - - /* - * Read the EEPROM. - */ - retval = rt2800_read_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Start validation of the data that has been read. - */ - mac = rt2800_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - eth_random_addr(mac); - rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2); - rt2x00_set_field16(&word, EEPROM_NIC_CONF0_TXPATH, 1); - rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820); - rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word); - rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); - } else if (rt2x00_rt(rt2x00dev, RT2860) || - rt2x00_rt(rt2x00dev, RT2872)) { - /* - * There is a max of 2 RX streams for RT28x0 series - */ - if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2) - rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2); - rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word); - } - - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_2G, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_5G, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_WPS_PBC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_2G, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_5G, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_ANT_DIVERSITY, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0); - rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF1, word); - rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if ((word & 0x00ff) == 0x00ff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word); - } - if ((word & 0xff00) == 0xff00) { - rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, - LED_MODE_TXRX_ACTIVITY); - rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); - rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - rt2800_eeprom_write(rt2x00dev, EEPROM_LED_AG_CONF, 0x5555); - rt2800_eeprom_write(rt2x00dev, EEPROM_LED_ACT_CONF, 0x2221); - rt2800_eeprom_write(rt2x00dev, EEPROM_LED_POLARITY, 0xa9f8); - rt2x00_eeprom_dbg(rt2x00dev, "Led Mode: 0x%04x\n", word); - } - - /* - * During the LNA validation we are going to use - * lna0 as correct value. Note that EEPROM_LNA - * is never validated. - */ - rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &word); - default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); - - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); - rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); - - drv_data->txmixer_gain_24g = rt2800_get_txmixer_gain_24g(rt2x00dev); - - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); - if (!rt2x00_rt(rt2x00dev, RT3593)) { - if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, - default_lna_gain); - } - rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); - - drv_data->txmixer_gain_5g = rt2800_get_txmixer_gain_5g(rt2x00dev); - - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); - rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); - - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); - if (!rt2x00_rt(rt2x00dev, RT3593)) { - if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, - default_lna_gain); - } - rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); - - if (rt2x00_rt(rt2x00dev, RT3593)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &word); - if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 || - rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff) - rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1, - default_lna_gain); - if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0x00 || - rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0xff) - rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1, - default_lna_gain); - rt2800_eeprom_write(rt2x00dev, EEPROM_EXT_LNA2, word); - } - - return 0; -} - -static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 value; - u16 eeprom; - u16 rf; - - /* - * Read EEPROM word for configuration. - */ - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom); - - /* - * Identify RF chipset by EEPROM value - * RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field - * RT53xx: defined in "EEPROM_CHIP_ID" field - */ - if (rt2x00_rt(rt2x00dev, RT3290) || - rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392)) - rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf); - else - rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE); - - switch (rf) { - case RF2820: - case RF2850: - case RF2720: - case RF2750: - case RF3020: - case RF2020: - case RF3021: - case RF3022: - case RF3052: - case RF3053: - case RF3070: - case RF3290: - case RF3320: - case RF3322: - case RF5360: - case RF5362: - case RF5370: - case RF5372: - case RF5390: - case RF5392: - case RF5592: - break; - default: - rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n", - rf); - return -ENODEV; - } - - rt2x00_set_rf(rt2x00dev, rf); - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx_chain_num = - rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH); - rt2x00dev->default_ant.rx_chain_num = - rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH); - - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); - - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3090) || - rt2x00_rt(rt2x00dev, RT3352) || - rt2x00_rt(rt2x00dev, RT3390)) { - value = rt2x00_get_field16(eeprom, - EEPROM_NIC_CONF1_ANT_DIVERSITY); - switch (value) { - case 0: - case 1: - case 2: - rt2x00dev->default_ant.tx = ANTENNA_A; - rt2x00dev->default_ant.rx = ANTENNA_A; - break; - case 3: - rt2x00dev->default_ant.tx = ANTENNA_A; - rt2x00dev->default_ant.rx = ANTENNA_B; - break; - } - } else { - rt2x00dev->default_ant.tx = ANTENNA_A; - rt2x00dev->default_ant.rx = ANTENNA_A; - } - - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) { - rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; /* Unused */ - rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; /* Unused */ - } - - /* - * Determine external LNA informations. - */ - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G)) - __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G)) - __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO)) - __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); - - /* - * Detect if this device has Bluetooth co-existence. - */ - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) - __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags); - - /* - * Read frequency offset and RF programming sequence. - */ - rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Store led settings, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); - - rt2x00dev->led_mcu_reg = eeprom; -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - /* - * Check if support EIRP tx power limit feature. - */ - rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) < - EIRP_MAX_TX_POWER_LIMIT) - __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags); - - return 0; -} - -/* - * RF value list for rt28xx - * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) - */ -static const struct rf_channel rf_vals[] = { - { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, - { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, - { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, - { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, - { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, - { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, - { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, - { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, - { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, - { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, - { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, - { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, - { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, - { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, - { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, - { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, - { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, - { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, - { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, - { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, - { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, - { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, - { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, - { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, - { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, - - /* 802.11 HyperLan 2 */ - { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, - { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, - { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, - { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, - { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, - { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, - { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, - { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, - { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, - { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, - { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, - { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, - { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, - { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, - { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, - { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, - - /* 802.11 UNII */ - { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, - { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, - { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, - { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, - { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, - { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, - { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, - { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, - { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, - { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, - { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, - - /* 802.11 Japan */ - { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, - { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, - { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, - { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, - { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, - { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, - { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, -}; - -/* - * RF value list for rt3xxx - * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053) - */ -static const struct rf_channel rf_vals_3x[] = { - {1, 241, 2, 2 }, - {2, 241, 2, 7 }, - {3, 242, 2, 2 }, - {4, 242, 2, 7 }, - {5, 243, 2, 2 }, - {6, 243, 2, 7 }, - {7, 244, 2, 2 }, - {8, 244, 2, 7 }, - {9, 245, 2, 2 }, - {10, 245, 2, 7 }, - {11, 246, 2, 2 }, - {12, 246, 2, 7 }, - {13, 247, 2, 2 }, - {14, 248, 2, 4 }, - - /* 802.11 UNI / HyperLan 2 */ - {36, 0x56, 0, 4}, - {38, 0x56, 0, 6}, - {40, 0x56, 0, 8}, - {44, 0x57, 0, 0}, - {46, 0x57, 0, 2}, - {48, 0x57, 0, 4}, - {52, 0x57, 0, 8}, - {54, 0x57, 0, 10}, - {56, 0x58, 0, 0}, - {60, 0x58, 0, 4}, - {62, 0x58, 0, 6}, - {64, 0x58, 0, 8}, - - /* 802.11 HyperLan 2 */ - {100, 0x5b, 0, 8}, - {102, 0x5b, 0, 10}, - {104, 0x5c, 0, 0}, - {108, 0x5c, 0, 4}, - {110, 0x5c, 0, 6}, - {112, 0x5c, 0, 8}, - {116, 0x5d, 0, 0}, - {118, 0x5d, 0, 2}, - {120, 0x5d, 0, 4}, - {124, 0x5d, 0, 8}, - {126, 0x5d, 0, 10}, - {128, 0x5e, 0, 0}, - {132, 0x5e, 0, 4}, - {134, 0x5e, 0, 6}, - {136, 0x5e, 0, 8}, - {140, 0x5f, 0, 0}, - - /* 802.11 UNII */ - {149, 0x5f, 0, 9}, - {151, 0x5f, 0, 11}, - {153, 0x60, 0, 1}, - {157, 0x60, 0, 5}, - {159, 0x60, 0, 7}, - {161, 0x60, 0, 9}, - {165, 0x61, 0, 1}, - {167, 0x61, 0, 3}, - {169, 0x61, 0, 5}, - {171, 0x61, 0, 7}, - {173, 0x61, 0, 9}, -}; - -static const struct rf_channel rf_vals_5592_xtal20[] = { - /* Channel, N, K, mod, R */ - {1, 482, 4, 10, 3}, - {2, 483, 4, 10, 3}, - {3, 484, 4, 10, 3}, - {4, 485, 4, 10, 3}, - {5, 486, 4, 10, 3}, - {6, 487, 4, 10, 3}, - {7, 488, 4, 10, 3}, - {8, 489, 4, 10, 3}, - {9, 490, 4, 10, 3}, - {10, 491, 4, 10, 3}, - {11, 492, 4, 10, 3}, - {12, 493, 4, 10, 3}, - {13, 494, 4, 10, 3}, - {14, 496, 8, 10, 3}, - {36, 172, 8, 12, 1}, - {38, 173, 0, 12, 1}, - {40, 173, 4, 12, 1}, - {42, 173, 8, 12, 1}, - {44, 174, 0, 12, 1}, - {46, 174, 4, 12, 1}, - {48, 174, 8, 12, 1}, - {50, 175, 0, 12, 1}, - {52, 175, 4, 12, 1}, - {54, 175, 8, 12, 1}, - {56, 176, 0, 12, 1}, - {58, 176, 4, 12, 1}, - {60, 176, 8, 12, 1}, - {62, 177, 0, 12, 1}, - {64, 177, 4, 12, 1}, - {100, 183, 4, 12, 1}, - {102, 183, 8, 12, 1}, - {104, 184, 0, 12, 1}, - {106, 184, 4, 12, 1}, - {108, 184, 8, 12, 1}, - {110, 185, 0, 12, 1}, - {112, 185, 4, 12, 1}, - {114, 185, 8, 12, 1}, - {116, 186, 0, 12, 1}, - {118, 186, 4, 12, 1}, - {120, 186, 8, 12, 1}, - {122, 187, 0, 12, 1}, - {124, 187, 4, 12, 1}, - {126, 187, 8, 12, 1}, - {128, 188, 0, 12, 1}, - {130, 188, 4, 12, 1}, - {132, 188, 8, 12, 1}, - {134, 189, 0, 12, 1}, - {136, 189, 4, 12, 1}, - {138, 189, 8, 12, 1}, - {140, 190, 0, 12, 1}, - {149, 191, 6, 12, 1}, - {151, 191, 10, 12, 1}, - {153, 192, 2, 12, 1}, - {155, 192, 6, 12, 1}, - {157, 192, 10, 12, 1}, - {159, 193, 2, 12, 1}, - {161, 193, 6, 12, 1}, - {165, 194, 2, 12, 1}, - {184, 164, 0, 12, 1}, - {188, 164, 4, 12, 1}, - {192, 165, 8, 12, 1}, - {196, 166, 0, 12, 1}, -}; - -static const struct rf_channel rf_vals_5592_xtal40[] = { - /* Channel, N, K, mod, R */ - {1, 241, 2, 10, 3}, - {2, 241, 7, 10, 3}, - {3, 242, 2, 10, 3}, - {4, 242, 7, 10, 3}, - {5, 243, 2, 10, 3}, - {6, 243, 7, 10, 3}, - {7, 244, 2, 10, 3}, - {8, 244, 7, 10, 3}, - {9, 245, 2, 10, 3}, - {10, 245, 7, 10, 3}, - {11, 246, 2, 10, 3}, - {12, 246, 7, 10, 3}, - {13, 247, 2, 10, 3}, - {14, 248, 4, 10, 3}, - {36, 86, 4, 12, 1}, - {38, 86, 6, 12, 1}, - {40, 86, 8, 12, 1}, - {42, 86, 10, 12, 1}, - {44, 87, 0, 12, 1}, - {46, 87, 2, 12, 1}, - {48, 87, 4, 12, 1}, - {50, 87, 6, 12, 1}, - {52, 87, 8, 12, 1}, - {54, 87, 10, 12, 1}, - {56, 88, 0, 12, 1}, - {58, 88, 2, 12, 1}, - {60, 88, 4, 12, 1}, - {62, 88, 6, 12, 1}, - {64, 88, 8, 12, 1}, - {100, 91, 8, 12, 1}, - {102, 91, 10, 12, 1}, - {104, 92, 0, 12, 1}, - {106, 92, 2, 12, 1}, - {108, 92, 4, 12, 1}, - {110, 92, 6, 12, 1}, - {112, 92, 8, 12, 1}, - {114, 92, 10, 12, 1}, - {116, 93, 0, 12, 1}, - {118, 93, 2, 12, 1}, - {120, 93, 4, 12, 1}, - {122, 93, 6, 12, 1}, - {124, 93, 8, 12, 1}, - {126, 93, 10, 12, 1}, - {128, 94, 0, 12, 1}, - {130, 94, 2, 12, 1}, - {132, 94, 4, 12, 1}, - {134, 94, 6, 12, 1}, - {136, 94, 8, 12, 1}, - {138, 94, 10, 12, 1}, - {140, 95, 0, 12, 1}, - {149, 95, 9, 12, 1}, - {151, 95, 11, 12, 1}, - {153, 96, 1, 12, 1}, - {155, 96, 3, 12, 1}, - {157, 96, 5, 12, 1}, - {159, 96, 7, 12, 1}, - {161, 96, 9, 12, 1}, - {165, 97, 1, 12, 1}, - {184, 82, 0, 12, 1}, - {188, 82, 4, 12, 1}, - {192, 82, 8, 12, 1}, - {196, 83, 0, 12, 1}, -}; - -static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *default_power1; - char *default_power2; - char *default_power3; - unsigned int i; - u32 reg; - - /* - * Disable powersaving as default. - */ - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - /* - * Initialize all hw fields. - */ - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_HT_CCK_RATES); - ieee80211_hw_set(rt2x00dev->hw, REPORTS_TX_ACK_STATUS); - ieee80211_hw_set(rt2x00dev->hw, AMPDU_AGGREGATION); - ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); - ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); - - /* - * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices - * unless we are capable of sending the buffered frames out after the - * DTIM transmission using rt2x00lib_beacondone. This will send out - * multicast and broadcast traffic immediately instead of buffering it - * infinitly and thus dropping it after some time. - */ - if (!rt2x00_is_usb(rt2x00dev)) - ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING); - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2800_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * As rt2800 has a global fallback table we cannot specify - * more then one tx rate per frame but since the hw will - * try several rates (based on the fallback table) we should - * initialize max_report_rates to the maximum number of rates - * we are going to try. Otherwise mac80211 will truncate our - * reported tx rates and the rc algortihm will end up with - * incorrect data. - */ - rt2x00dev->hw->max_rates = 1; - rt2x00dev->hw->max_report_rates = 7; - rt2x00dev->hw->max_rate_tries = 1; - - /* - * Initialize hw_mode information. - */ - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - switch (rt2x00dev->chip.rf) { - case RF2720: - case RF2820: - spec->num_channels = 14; - spec->channels = rf_vals; - break; - - case RF2750: - case RF2850: - spec->num_channels = ARRAY_SIZE(rf_vals); - spec->channels = rf_vals; - break; - - case RF2020: - case RF3020: - case RF3021: - case RF3022: - case RF3070: - case RF3290: - case RF3320: - case RF3322: - case RF5360: - case RF5362: - case RF5370: - case RF5372: - case RF5390: - case RF5392: - spec->num_channels = 14; - spec->channels = rf_vals_3x; - break; - - case RF3052: - case RF3053: - spec->num_channels = ARRAY_SIZE(rf_vals_3x); - spec->channels = rf_vals_3x; - break; - - case RF5592: - rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX, ®); - if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) { - spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal40); - spec->channels = rf_vals_5592_xtal40; - } else { - spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal20); - spec->channels = rf_vals_5592_xtal20; - } - break; - } - - if (WARN_ON_ONCE(!spec->channels)) - return -ENODEV; - - spec->supported_bands = SUPPORT_BAND_2GHZ; - if (spec->num_channels > 14) - spec->supported_bands |= SUPPORT_BAND_5GHZ; - - /* - * Initialize HT information. - */ - if (!rt2x00_rf(rt2x00dev, RF2020)) - spec->ht.ht_supported = true; - else - spec->ht.ht_supported = false; - - spec->ht.cap = - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | - IEEE80211_HT_CAP_GRN_FLD | - IEEE80211_HT_CAP_SGI_20 | - IEEE80211_HT_CAP_SGI_40; - - if (rt2x00dev->default_ant.tx_chain_num >= 2) - spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC; - - spec->ht.cap |= rt2x00dev->default_ant.rx_chain_num << - IEEE80211_HT_CAP_RX_STBC_SHIFT; - - spec->ht.ampdu_factor = 3; - spec->ht.ampdu_density = 4; - spec->ht.mcs.tx_params = - IEEE80211_HT_MCS_TX_DEFINED | - IEEE80211_HT_MCS_TX_RX_DIFF | - ((rt2x00dev->default_ant.tx_chain_num - 1) << - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); - - switch (rt2x00dev->default_ant.rx_chain_num) { - case 3: - spec->ht.mcs.rx_mask[2] = 0xff; - case 2: - spec->ht.mcs.rx_mask[1] = 0xff; - case 1: - spec->ht.mcs.rx_mask[0] = 0xff; - spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ - break; - } - - /* - * Create channel information array - */ - info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - default_power1 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); - default_power2 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); - - if (rt2x00dev->default_ant.tx_chain_num > 2) - default_power3 = rt2800_eeprom_addr(rt2x00dev, - EEPROM_EXT_TXPOWER_BG3); - else - default_power3 = NULL; - - for (i = 0; i < 14; i++) { - info[i].default_power1 = default_power1[i]; - info[i].default_power2 = default_power2[i]; - if (default_power3) - info[i].default_power3 = default_power3[i]; - } - - if (spec->num_channels > 14) { - default_power1 = rt2800_eeprom_addr(rt2x00dev, - EEPROM_TXPOWER_A1); - default_power2 = rt2800_eeprom_addr(rt2x00dev, - EEPROM_TXPOWER_A2); - - if (rt2x00dev->default_ant.tx_chain_num > 2) - default_power3 = - rt2800_eeprom_addr(rt2x00dev, - EEPROM_EXT_TXPOWER_A3); - else - default_power3 = NULL; - - for (i = 14; i < spec->num_channels; i++) { - info[i].default_power1 = default_power1[i - 14]; - info[i].default_power2 = default_power2[i - 14]; - if (default_power3) - info[i].default_power3 = default_power3[i - 14]; - } - } - - switch (rt2x00dev->chip.rf) { - case RF2020: - case RF3020: - case RF3021: - case RF3022: - case RF3320: - case RF3052: - case RF3053: - case RF3070: - case RF3290: - case RF5360: - case RF5362: - case RF5370: - case RF5372: - case RF5390: - case RF5392: - __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags); - break; - } - - return 0; -} - -static int rt2800_probe_rt(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u32 rt; - u32 rev; - - if (rt2x00_rt(rt2x00dev, RT3290)) - rt2800_register_read(rt2x00dev, MAC_CSR0_3290, ®); - else - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - - rt = rt2x00_get_field32(reg, MAC_CSR0_CHIPSET); - rev = rt2x00_get_field32(reg, MAC_CSR0_REVISION); - - switch (rt) { - case RT2860: - case RT2872: - case RT2883: - case RT3070: - case RT3071: - case RT3090: - case RT3290: - case RT3352: - case RT3390: - case RT3572: - case RT3593: - case RT5390: - case RT5392: - case RT5592: - break; - default: - rt2x00_err(rt2x00dev, "Invalid RT chipset 0x%04x, rev %04x detected\n", - rt, rev); - return -ENODEV; - } - - rt2x00_set_rt(rt2x00dev, rt, rev); - - return 0; -} - -int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u32 reg; - - retval = rt2800_probe_rt(rt2x00dev); - if (retval) - return retval; - - /* - * Allocate eeprom data. - */ - retval = rt2800_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2800_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1); - rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); - - /* - * Initialize hw specifications. - */ - retval = rt2800_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * Set device capabilities. - */ - __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags); - if (!rt2x00_is_usb(rt2x00dev)) - __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags); - - /* - * Set device requirements. - */ - if (!rt2x00_is_soc(rt2x00dev)) - __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags); - if (!rt2800_hwcrypt_disabled(rt2x00dev)) - __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags); - if (rt2x00_is_usb(rt2x00dev)) - __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags); - else { - __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags); - } - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_probe_hw); - -/* - * IEEE80211 stack callback functions. - */ -void rt2800_get_key_seq(struct ieee80211_hw *hw, - struct ieee80211_key_conf *key, - struct ieee80211_key_seq *seq) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - - if (key->cipher != WLAN_CIPHER_SUITE_TKIP) - return; - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - rt2800_register_multiread(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2); - memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4); -} -EXPORT_SYMBOL_GPL(rt2800_get_key_seq); - -int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); - - rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); - rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); - rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); - rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); - rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); - rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); - rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); - rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold); - -int rt2800_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - struct rt2x00_field32 field; - int retval; - u32 reg; - u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will - * update the queue settings and validate the input. After that - * we are free to update the registers based on the value - * in the queue parameter. - */ - retval = rt2x00mac_conf_tx(hw, vif, queue_idx, params); - if (retval) - return retval; - - /* - * We only need to perform additional register initialization - * for WMM queues/ - */ - if (queue_idx >= 4) - return 0; - - queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ - offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); - field.bit_offset = (queue_idx & 1) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2800_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; - field.bit_mask = 0xf << field.bit_offset; - - rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); - rt2x00_set_field32(®, field, queue->aifs); - rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); - - rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_min); - rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); - - rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_max); - rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); - - /* Update EDCA registers */ - offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); - - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); - rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); - rt2800_register_write(rt2x00dev, offset, reg); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800_conf_tx); - -u64 rt2800_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, ®); - tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; - rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, ®); - tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); - - return tsf; -} -EXPORT_SYMBOL_GPL(rt2800_get_tsf); - -int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - enum ieee80211_ampdu_mlme_action action, - struct ieee80211_sta *sta, u16 tid, u16 *ssn, - u8 buf_size, bool amsdu) -{ - struct rt2x00_sta *sta_priv = (struct rt2x00_sta *)sta->drv_priv; - int ret = 0; - - /* - * Don't allow aggregation for stations the hardware isn't aware - * of because tx status reports for frames to an unknown station - * always contain wcid=WCID_END+1 and thus we can't distinguish - * between multiple stations which leads to unwanted situations - * when the hw reorders frames due to aggregation. - */ - if (sta_priv->wcid > WCID_END) - return 1; - - switch (action) { - case IEEE80211_AMPDU_RX_START: - case IEEE80211_AMPDU_RX_STOP: - /* - * The hw itself takes care of setting up BlockAck mechanisms. - * So, we only have to allow mac80211 to nagotiate a BlockAck - * agreement. Once that is done, the hw will BlockAck incoming - * AMPDUs without further setup. - */ - break; - case IEEE80211_AMPDU_TX_START: - ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); - break; - case IEEE80211_AMPDU_TX_STOP_CONT: - case IEEE80211_AMPDU_TX_STOP_FLUSH: - case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: - ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); - break; - case IEEE80211_AMPDU_TX_OPERATIONAL: - break; - default: - rt2x00_warn((struct rt2x00_dev *)hw->priv, - "Unknown AMPDU action\n"); - } - - return ret; -} -EXPORT_SYMBOL_GPL(rt2800_ampdu_action); - -int rt2800_get_survey(struct ieee80211_hw *hw, int idx, - struct survey_info *survey) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct ieee80211_conf *conf = &hw->conf; - u32 idle, busy, busy_ext; - - if (idx != 0) - return -ENOENT; - - survey->channel = conf->chandef.chan; - - rt2800_register_read(rt2x00dev, CH_IDLE_STA, &idle); - rt2800_register_read(rt2x00dev, CH_BUSY_STA, &busy); - rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &busy_ext); - - if (idle || busy) { - survey->filled = SURVEY_INFO_TIME | - SURVEY_INFO_TIME_BUSY | - SURVEY_INFO_TIME_EXT_BUSY; - - survey->time = (idle + busy) / 1000; - survey->time_busy = busy / 1000; - survey->time_ext_busy = busy_ext / 1000; - } - - if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) - survey->filled |= SURVEY_INFO_IN_USE; - - return 0; - -} -EXPORT_SYMBOL_GPL(rt2800_get_survey); - -MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz"); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2800 library"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h deleted file mode 100644 index 440790b92b19..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2009 Bartlomiej Zolnierkiewicz - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef RT2800LIB_H -#define RT2800LIB_H - -struct rt2800_ops { - void (*register_read)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value); - void (*register_read_lock)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value); - void (*register_write)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 value); - void (*register_write_lock)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 value); - - void (*register_multiread)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length); - void (*register_multiwrite)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, const u32 length); - - int (*regbusy_read)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, u32 *reg); - - int (*read_eeprom)(struct rt2x00_dev *rt2x00dev); - bool (*hwcrypt_disabled)(struct rt2x00_dev *rt2x00dev); - - int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len); - int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev); - __le32 *(*drv_get_txwi)(struct queue_entry *entry); -}; - -static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - rt2800ops->register_read(rt2x00dev, offset, value); -} - -static inline void rt2800_register_read_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - rt2800ops->register_read_lock(rt2x00dev, offset, value); -} - -static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - rt2800ops->register_write(rt2x00dev, offset, value); -} - -static inline void rt2800_register_write_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - rt2800ops->register_write_lock(rt2x00dev, offset, value); -} - -static inline void rt2800_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - rt2800ops->register_multiread(rt2x00dev, offset, value, length); -} - -static inline void rt2800_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, - const u32 length) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - rt2800ops->register_multiwrite(rt2x00dev, offset, value, length); -} - -static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg); -} - -static inline int rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - return rt2800ops->read_eeprom(rt2x00dev); -} - -static inline bool rt2800_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - return rt2800ops->hwcrypt_disabled(rt2x00dev); -} - -static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - return rt2800ops->drv_write_firmware(rt2x00dev, data, len); -} - -static inline int rt2800_drv_init_registers(struct rt2x00_dev *rt2x00dev) -{ - const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - - return rt2800ops->drv_init_registers(rt2x00dev); -} - -static inline __le32 *rt2800_drv_get_txwi(struct queue_entry *entry) -{ - const struct rt2800_ops *rt2800ops = entry->queue->rt2x00dev->ops->drv; - - return rt2800ops->drv_get_txwi(entry); -} - -void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1); - -int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev); -int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev); - -int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len); -int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len); - -void rt2800_write_tx_data(struct queue_entry *entry, - struct txentry_desc *txdesc); -void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc); - -void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32* txwi); - -void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc); -void rt2800_clear_beacon(struct queue_entry *entry); - -extern const struct rt2x00debug rt2800_rt2x00debug; - -int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev); -int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key); -int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key); -int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif, - struct ieee80211_sta *sta); -int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, int wcid); -void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags); -void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, const unsigned int flags); -void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp, - u32 changed); -void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant); -void rt2800_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags); -void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); -void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); -void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, - const u32 count); -void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev); -void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev); - -int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev); -void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev); - -int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev); -int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); - -int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev); - -void rt2800_get_key_seq(struct ieee80211_hw *hw, - struct ieee80211_key_conf *key, - struct ieee80211_key_seq *seq); -int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value); -int rt2800_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue_idx, - const struct ieee80211_tx_queue_params *params); -u64 rt2800_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif); -int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - enum ieee80211_ampdu_mlme_action action, - struct ieee80211_sta *sta, u16 tid, u16 *ssn, - u8 buf_size, bool amsdu); -int rt2800_get_survey(struct ieee80211_hw *hw, int idx, - struct survey_info *survey); -void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev); - -void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev, - unsigned short *txwi_size, - unsigned short *rxwi_size); - -#endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800mmio.c b/drivers/net/wireless/rt2x00/rt2800mmio.c deleted file mode 100644 index de4790b41be7..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800mmio.c +++ /dev/null @@ -1,871 +0,0 @@ -/* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - * Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> - * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> - * Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - * Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> - * Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - * Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> - * <http://rt2x00.serialmonkey.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* Module: rt2800mmio - * Abstract: rt2800 MMIO device routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/export.h> - -#include "rt2x00.h" -#include "rt2x00mmio.h" -#include "rt2800.h" -#include "rt2800lib.h" -#include "rt2800mmio.h" - -/* - * TX descriptor initialization - */ -__le32 *rt2800mmio_get_txwi(struct queue_entry *entry) -{ - return (__le32 *) entry->skb->data; -} -EXPORT_SYMBOL_GPL(rt2800mmio_get_txwi); - -void rt2800mmio_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *txd = entry_priv->desc; - u32 word; - const unsigned int txwi_size = entry->queue->winfo_size; - - /* - * The buffers pointed by SD_PTR0/SD_LEN0 and SD_PTR1/SD_LEN1 - * must contains a TXWI structure + 802.11 header + padding + 802.11 - * data. We choose to have SD_PTR0/SD_LEN0 only contains TXWI and - * SD_PTR1/SD_LEN1 contains 802.11 header + padding + 802.11 - * data. It means that LAST_SEC0 is always 0. - */ - - /* - * Initialize TX descriptor - */ - word = 0; - rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma); - rt2x00_desc_write(txd, 0, word); - - word = 0; - rt2x00_set_field32(&word, TXD_W1_SD_LEN1, entry->skb->len); - rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, - !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W1_BURST, - test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W1_SD_LEN0, txwi_size); - rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0); - rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0); - rt2x00_desc_write(txd, 1, word); - - word = 0; - rt2x00_set_field32(&word, TXD_W2_SD_PTR1, - skbdesc->skb_dma + txwi_size); - rt2x00_desc_write(txd, 2, word); - - word = 0; - rt2x00_set_field32(&word, TXD_W3_WIV, - !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W3_QSEL, 2); - rt2x00_desc_write(txd, 3, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->desc = txd; - skbdesc->desc_len = TXD_DESC_SIZE; -} -EXPORT_SYMBOL_GPL(rt2800mmio_write_tx_desc); - -/* - * RX control handlers - */ -void rt2800mmio_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *rxd = entry_priv->desc; - u32 word; - - rt2x00_desc_read(rxd, 3, &word); - - if (rt2x00_get_field32(word, RXD_W3_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - - /* - * Unfortunately we don't know the cipher type used during - * decryption. This prevents us from correct providing - * correct statistics through debugfs. - */ - rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W3_CIPHER_ERROR); - - if (rt2x00_get_field32(word, RXD_W3_DECRYPTED)) { - /* - * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. Unfortunately the descriptor doesn't contain - * any fields with the EIV/IV data either, so they can't - * be restored by rt2x00lib. - */ - rxdesc->flags |= RX_FLAG_IV_STRIPPED; - - /* - * The hardware has already checked the Michael Mic and has - * stripped it from the frame. Signal this to mac80211. - */ - rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; - - if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) - rxdesc->flags |= RX_FLAG_DECRYPTED; - else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) - rxdesc->flags |= RX_FLAG_MMIC_ERROR; - } - - if (rt2x00_get_field32(word, RXD_W3_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; - - if (rt2x00_get_field32(word, RXD_W3_L2PAD)) - rxdesc->dev_flags |= RXDONE_L2PAD; - - /* - * Process the RXWI structure that is at the start of the buffer. - */ - rt2800_process_rxwi(entry, rxdesc); -} -EXPORT_SYMBOL_GPL(rt2800mmio_fill_rxdone); - -/* - * Interrupt functions. - */ -static void rt2800mmio_wakeup(struct rt2x00_dev *rt2x00dev) -{ - struct ieee80211_conf conf = { .flags = 0 }; - struct rt2x00lib_conf libconf = { .conf = &conf }; - - rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); -} - -static bool rt2800mmio_txdone_entry_check(struct queue_entry *entry, u32 status) -{ - __le32 *txwi; - u32 word; - int wcid, tx_wcid; - - wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID); - - txwi = rt2800_drv_get_txwi(entry); - rt2x00_desc_read(txwi, 1, &word); - tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); - - return (tx_wcid == wcid); -} - -static bool rt2800mmio_txdone_find_entry(struct queue_entry *entry, void *data) -{ - u32 status = *(u32 *)data; - - /* - * rt2800pci hardware might reorder frames when exchanging traffic - * with multiple BA enabled STAs. - * - * For example, a tx queue - * [ STA1 | STA2 | STA1 | STA2 ] - * can result in tx status reports - * [ STA1 | STA1 | STA2 | STA2 ] - * when the hw decides to aggregate the frames for STA1 into one AMPDU. - * - * To mitigate this effect, associate the tx status to the first frame - * in the tx queue with a matching wcid. - */ - if (rt2800mmio_txdone_entry_check(entry, status) && - !test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) { - /* - * Got a matching frame, associate the tx status with - * the frame - */ - entry->status = status; - set_bit(ENTRY_DATA_STATUS_SET, &entry->flags); - return true; - } - - /* Check the next frame */ - return false; -} - -static bool rt2800mmio_txdone_match_first(struct queue_entry *entry, void *data) -{ - u32 status = *(u32 *)data; - - /* - * Find the first frame without tx status and assign this status to it - * regardless if it matches or not. - */ - if (!test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) { - /* - * Got a matching frame, associate the tx status with - * the frame - */ - entry->status = status; - set_bit(ENTRY_DATA_STATUS_SET, &entry->flags); - return true; - } - - /* Check the next frame */ - return false; -} -static bool rt2800mmio_txdone_release_entries(struct queue_entry *entry, - void *data) -{ - if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) { - rt2800_txdone_entry(entry, entry->status, - rt2800mmio_get_txwi(entry)); - return false; - } - - /* No more frames to release */ - return true; -} - -static bool rt2800mmio_txdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - u32 status; - u8 qid; - int max_tx_done = 16; - - while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) { - qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE); - if (unlikely(qid >= QID_RX)) { - /* - * Unknown queue, this shouldn't happen. Just drop - * this tx status. - */ - rt2x00_warn(rt2x00dev, "Got TX status report with unexpected pid %u, dropping\n", - qid); - break; - } - - queue = rt2x00queue_get_tx_queue(rt2x00dev, qid); - if (unlikely(queue == NULL)) { - /* - * The queue is NULL, this shouldn't happen. Stop - * processing here and drop the tx status - */ - rt2x00_warn(rt2x00dev, "Got TX status for an unavailable queue %u, dropping\n", - qid); - break; - } - - if (unlikely(rt2x00queue_empty(queue))) { - /* - * The queue is empty. Stop processing here - * and drop the tx status. - */ - rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n", - qid); - break; - } - - /* - * Let's associate this tx status with the first - * matching frame. - */ - if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, - Q_INDEX, &status, - rt2800mmio_txdone_find_entry)) { - /* - * We cannot match the tx status to any frame, so just - * use the first one. - */ - if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, - Q_INDEX, &status, - rt2800mmio_txdone_match_first)) { - rt2x00_warn(rt2x00dev, "No frame found for TX status on queue %u, dropping\n", - qid); - break; - } - } - - /* - * Release all frames with a valid tx status. - */ - rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, - Q_INDEX, NULL, - rt2800mmio_txdone_release_entries); - - if (--max_tx_done == 0) - break; - } - - return !max_tx_done; -} - -static inline void rt2800mmio_enable_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) -{ - u32 reg; - - /* - * Enable a single interrupt. The interrupt mask register - * access needs locking. - */ - spin_lock_irq(&rt2x00dev->irqmask_lock); - rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, irq_field, 1); - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - spin_unlock_irq(&rt2x00dev->irqmask_lock); -} - -void rt2800mmio_txstatus_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2800mmio_txdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->txstatus_tasklet); - - /* - * No need to enable the tx status interrupt here as we always - * leave it enabled to minimize the possibility of a tx status - * register overflow. See comment in interrupt handler. - */ -} -EXPORT_SYMBOL_GPL(rt2800mmio_txstatus_tasklet); - -void rt2800mmio_pretbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00lib_pretbtt(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT); -} -EXPORT_SYMBOL_GPL(rt2800mmio_pretbtt_tasklet); - -void rt2800mmio_tbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u32 reg; - - rt2x00lib_beacondone(rt2x00dev); - - if (rt2x00dev->intf_ap_count) { - /* - * The rt2800pci hardware tbtt timer is off by 1us per tbtt - * causing beacon skew and as a result causing problems with - * some powersaving clients over time. Shorten the beacon - * interval every 64 beacons by 64us to mitigate this effect. - */ - if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) { - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - (rt2x00dev->beacon_int * 16) - 1); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) { - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - (rt2x00dev->beacon_int * 16)); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - drv_data->tbtt_tick++; - drv_data->tbtt_tick %= BCN_TBTT_OFFSET; - } - - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT); -} -EXPORT_SYMBOL_GPL(rt2800mmio_tbtt_tasklet); - -void rt2800mmio_rxdone_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2x00mmio_rxdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE); -} -EXPORT_SYMBOL_GPL(rt2800mmio_rxdone_tasklet); - -void rt2800mmio_autowake_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2800mmio_wakeup(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800mmio_enable_interrupt(rt2x00dev, - INT_MASK_CSR_AUTO_WAKEUP); -} -EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet); - -static void rt2800mmio_txstatus_interrupt(struct rt2x00_dev *rt2x00dev) -{ - u32 status; - int i; - - /* - * The TX_FIFO_STATUS interrupt needs special care. We should - * read TX_STA_FIFO but we should do it immediately as otherwise - * the register can overflow and we would lose status reports. - * - * Hence, read the TX_STA_FIFO register and copy all tx status - * reports into a kernel FIFO which is handled in the txstatus - * tasklet. We use a tasklet to process the tx status reports - * because we can schedule the tasklet multiple times (when the - * interrupt fires again during tx status processing). - * - * Furthermore we don't disable the TX_FIFO_STATUS - * interrupt here but leave it enabled so that the TX_STA_FIFO - * can also be read while the tx status tasklet gets executed. - * - * Since we have only one producer and one consumer we don't - * need to lock the kfifo. - */ - for (i = 0; i < rt2x00dev->tx->limit; i++) { - rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status); - - if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID)) - break; - - if (!kfifo_put(&rt2x00dev->txstatus_fifo, status)) { - rt2x00_warn(rt2x00dev, "TX status FIFO overrun, drop tx status report\n"); - break; - } - } - - /* Schedule the tasklet for processing the tx status. */ - tasklet_schedule(&rt2x00dev->txstatus_tasklet); -} - -irqreturn_t rt2800mmio_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg, mask; - - /* Read status and ACK all interrupts */ - rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - - if (!reg) - return IRQ_NONE; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - /* - * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits - * for interrupts and interrupt masks we can just use the value of - * INT_SOURCE_CSR to create the interrupt mask. - */ - mask = ~reg; - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) { - rt2800mmio_txstatus_interrupt(rt2x00dev); - /* - * Never disable the TX_FIFO_STATUS interrupt. - */ - rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1); - } - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT)) - tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT)) - tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) - tasklet_schedule(&rt2x00dev->autowake_tasklet); - - /* - * Disable all interrupts for which a tasklet was scheduled right now, - * the tasklet will reenable the appropriate interrupts. - */ - spin_lock(&rt2x00dev->irqmask_lock); - rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®); - reg &= mask; - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - spin_unlock(&rt2x00dev->irqmask_lock); - - return IRQ_HANDLED; -} -EXPORT_SYMBOL_GPL(rt2800mmio_interrupt); - -void rt2800mmio_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - unsigned long flags; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - } - - spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); - reg = 0; - if (state == STATE_RADIO_IRQ_ON) { - rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, 1); - rt2x00_set_field32(®, INT_MASK_CSR_TBTT, 1); - rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, 1); - rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1); - rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, 1); - } - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); - - if (state == STATE_RADIO_IRQ_OFF) { - /* - * Wait for possibly running tasklets to finish. - */ - tasklet_kill(&rt2x00dev->txstatus_tasklet); - tasklet_kill(&rt2x00dev->rxdone_tasklet); - tasklet_kill(&rt2x00dev->autowake_tasklet); - tasklet_kill(&rt2x00dev->tbtt_tasklet); - tasklet_kill(&rt2x00dev->pretbtt_tasklet); - } -} -EXPORT_SYMBOL_GPL(rt2800mmio_toggle_irq); - -/* - * Queue handlers. - */ -void rt2800mmio_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - rt2x00mmio_register_read(rt2x00dev, INT_TIMER_EN, ®); - rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 1); - rt2x00mmio_register_write(rt2x00dev, INT_TIMER_EN, reg); - break; - default: - break; - } -} -EXPORT_SYMBOL_GPL(rt2800mmio_start_queue); - -void rt2800mmio_kick_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - struct queue_entry *entry; - - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - entry = rt2x00queue_get_entry(queue, Q_INDEX); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX(queue->qid), - entry->entry_idx); - break; - case QID_MGMT: - entry = rt2x00queue_get_entry(queue, Q_INDEX); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX(5), - entry->entry_idx); - break; - default: - break; - } -} -EXPORT_SYMBOL_GPL(rt2800mmio_kick_queue); - -void rt2800mmio_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - rt2x00mmio_register_read(rt2x00dev, INT_TIMER_EN, ®); - rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 0); - rt2x00mmio_register_write(rt2x00dev, INT_TIMER_EN, reg); - - /* - * Wait for current invocation to finish. The tasklet - * won't be scheduled anymore afterwards since we disabled - * the TBTT and PRE TBTT timer. - */ - tasklet_kill(&rt2x00dev->tbtt_tasklet); - tasklet_kill(&rt2x00dev->pretbtt_tasklet); - - break; - default: - break; - } -} -EXPORT_SYMBOL_GPL(rt2800mmio_stop_queue); - -void rt2800mmio_queue_init(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - unsigned short txwi_size, rxwi_size; - - rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size); - - switch (queue->qid) { - case QID_RX: - queue->limit = 128; - queue->data_size = AGGREGATION_SIZE; - queue->desc_size = RXD_DESC_SIZE; - queue->winfo_size = rxwi_size; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 64; - queue->data_size = AGGREGATION_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->winfo_size = txwi_size; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_BEACON: - queue->limit = 8; - queue->data_size = 0; /* No DMA required for beacons */ - queue->desc_size = TXD_DESC_SIZE; - queue->winfo_size = txwi_size; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_ATIM: - /* fallthrough */ - default: - BUG(); - break; - } -} -EXPORT_SYMBOL_GPL(rt2800mmio_queue_init); - -/* - * Initialization functions. - */ -bool rt2800mmio_get_entry_state(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 1, &word); - - return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE)); - } else { - rt2x00_desc_read(entry_priv->desc, 1, &word); - - return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE)); - } -} -EXPORT_SYMBOL_GPL(rt2800mmio_get_entry_state); - -void rt2800mmio_clear_entry(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 0, word); - - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0); - rt2x00_desc_write(entry_priv->desc, 1, word); - - /* - * Set RX IDX in register to inform hardware that we have - * handled this entry and it is available for reuse again. - */ - rt2x00mmio_register_write(rt2x00dev, RX_CRX_IDX, - entry->entry_idx); - } else { - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1); - rt2x00_desc_write(entry_priv->desc, 1, word); - } -} -EXPORT_SYMBOL_GPL(rt2800mmio_clear_entry); - -int rt2800mmio_init_queues(struct rt2x00_dev *rt2x00dev) -{ - struct queue_entry_priv_mmio *entry_priv; - - /* - * Initialize registers. - */ - entry_priv = rt2x00dev->tx[0].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR0, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT0, - rt2x00dev->tx[0].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX0, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX0, 0); - - entry_priv = rt2x00dev->tx[1].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR1, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT1, - rt2x00dev->tx[1].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX1, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX1, 0); - - entry_priv = rt2x00dev->tx[2].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR2, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT2, - rt2x00dev->tx[2].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX2, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX2, 0); - - entry_priv = rt2x00dev->tx[3].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR3, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT3, - rt2x00dev->tx[3].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX3, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX3, 0); - - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR4, 0); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT4, 0); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX4, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX4, 0); - - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR5, 0); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT5, 0); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX5, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX5, 0); - - entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, RX_BASE_PTR, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, RX_MAX_CNT, - rt2x00dev->rx[0].limit); - rt2x00mmio_register_write(rt2x00dev, RX_CRX_IDX, - rt2x00dev->rx[0].limit - 1); - rt2x00mmio_register_write(rt2x00dev, RX_DRX_IDX, 0); - - rt2800_disable_wpdma(rt2x00dev); - - rt2x00mmio_register_write(rt2x00dev, DELAY_INT_CFG, 0); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800mmio_init_queues); - -int rt2800mmio_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Reset DMA indexes - */ - rt2x00mmio_register_read(rt2x00dev, WPDMA_RST_IDX, ®); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); - rt2x00mmio_register_write(rt2x00dev, WPDMA_RST_IDX, reg); - - rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); - rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); - - if (rt2x00_is_pcie(rt2x00dev) && - (rt2x00_rt(rt2x00dev, RT3090) || - rt2x00_rt(rt2x00dev, RT3390) || - rt2x00_rt(rt2x00dev, RT3572) || - rt2x00_rt(rt2x00dev, RT3593) || - rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392) || - rt2x00_rt(rt2x00dev, RT5592))) { - rt2x00mmio_register_read(rt2x00dev, AUX_CTRL, ®); - rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1); - rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1); - rt2x00mmio_register_write(rt2x00dev, AUX_CTRL, reg); - } - - rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - reg = 0; - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2800mmio_init_registers); - -/* - * Device state switch handlers. - */ -int rt2800mmio_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* Wait for DMA, ignore error until we initialize queues. */ - rt2800_wait_wpdma_ready(rt2x00dev); - - if (unlikely(rt2800mmio_init_queues(rt2x00dev))) - return -EIO; - - return rt2800_enable_radio(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2800mmio_enable_radio); - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2800 MMIO library"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2800mmio.h b/drivers/net/wireless/rt2x00/rt2800mmio.h deleted file mode 100644 index b63312ce3f27..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800mmio.h +++ /dev/null @@ -1,163 +0,0 @@ -/* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - * Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> - * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> - * Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - * Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> - * Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - * Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> - * <http://rt2x00.serialmonkey.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* Module: rt2800mmio - * Abstract: forward declarations for the rt2800mmio module. - */ - -#ifndef RT2800MMIO_H -#define RT2800MMIO_H - -/* - * Queue register offset macros - */ -#define TX_QUEUE_REG_OFFSET 0x10 -#define TX_BASE_PTR(__x) (TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)) -#define TX_MAX_CNT(__x) (TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)) -#define TX_CTX_IDX(__x) (TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)) -#define TX_DTX_IDX(__x) (TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE (4 * sizeof(__le32)) -#define RXD_DESC_SIZE (4 * sizeof(__le32)) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_SD_PTR0 FIELD32(0xffffffff) - -/* - * Word1 - */ -#define TXD_W1_SD_LEN1 FIELD32(0x00003fff) -#define TXD_W1_LAST_SEC1 FIELD32(0x00004000) -#define TXD_W1_BURST FIELD32(0x00008000) -#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000) -#define TXD_W1_LAST_SEC0 FIELD32(0x40000000) -#define TXD_W1_DMA_DONE FIELD32(0x80000000) - -/* - * Word2 - */ -#define TXD_W2_SD_PTR1 FIELD32(0xffffffff) - -/* - * Word3 - * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI - * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. - * 0:MGMT, 1:HCCA 2:EDCA - */ -#define TXD_W3_WIV FIELD32(0x01000000) -#define TXD_W3_QSEL FIELD32(0x06000000) -#define TXD_W3_TCO FIELD32(0x20000000) -#define TXD_W3_UCO FIELD32(0x40000000) -#define TXD_W3_ICO FIELD32(0x80000000) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_SDP0 FIELD32(0xffffffff) - -/* - * Word1 - */ -#define RXD_W1_SDL1 FIELD32(0x00003fff) -#define RXD_W1_SDL0 FIELD32(0x3fff0000) -#define RXD_W1_LS0 FIELD32(0x40000000) -#define RXD_W1_DMA_DONE FIELD32(0x80000000) - -/* - * Word2 - */ -#define RXD_W2_SDP1 FIELD32(0xffffffff) - -/* - * Word3 - * AMSDU: RX with 802.3 header, not 802.11 header. - * DECRYPTED: This frame is being decrypted. - */ -#define RXD_W3_BA FIELD32(0x00000001) -#define RXD_W3_DATA FIELD32(0x00000002) -#define RXD_W3_NULLDATA FIELD32(0x00000004) -#define RXD_W3_FRAG FIELD32(0x00000008) -#define RXD_W3_UNICAST_TO_ME FIELD32(0x00000010) -#define RXD_W3_MULTICAST FIELD32(0x00000020) -#define RXD_W3_BROADCAST FIELD32(0x00000040) -#define RXD_W3_MY_BSS FIELD32(0x00000080) -#define RXD_W3_CRC_ERROR FIELD32(0x00000100) -#define RXD_W3_CIPHER_ERROR FIELD32(0x00000600) -#define RXD_W3_AMSDU FIELD32(0x00000800) -#define RXD_W3_HTC FIELD32(0x00001000) -#define RXD_W3_RSSI FIELD32(0x00002000) -#define RXD_W3_L2PAD FIELD32(0x00004000) -#define RXD_W3_AMPDU FIELD32(0x00008000) -#define RXD_W3_DECRYPTED FIELD32(0x00010000) -#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000) -#define RXD_W3_PLCP_RSSI FIELD32(0x00040000) - -/* TX descriptor initialization */ -__le32 *rt2800mmio_get_txwi(struct queue_entry *entry); -void rt2800mmio_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc); - -/* RX control handlers */ -void rt2800mmio_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc); - -/* Interrupt functions */ -void rt2800mmio_txstatus_tasklet(unsigned long data); -void rt2800mmio_pretbtt_tasklet(unsigned long data); -void rt2800mmio_tbtt_tasklet(unsigned long data); -void rt2800mmio_rxdone_tasklet(unsigned long data); -void rt2800mmio_autowake_tasklet(unsigned long data); -irqreturn_t rt2800mmio_interrupt(int irq, void *dev_instance); -void rt2800mmio_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state); - -/* Queue handlers */ -void rt2800mmio_start_queue(struct data_queue *queue); -void rt2800mmio_kick_queue(struct data_queue *queue); -void rt2800mmio_stop_queue(struct data_queue *queue); -void rt2800mmio_queue_init(struct data_queue *queue); - -/* Initialization functions */ -bool rt2800mmio_get_entry_state(struct queue_entry *entry); -void rt2800mmio_clear_entry(struct queue_entry *entry); -int rt2800mmio_init_queues(struct rt2x00_dev *rt2x00dev); -int rt2800mmio_init_registers(struct rt2x00_dev *rt2x00dev); - -/* Device state switch handlers. */ -int rt2800mmio_enable_radio(struct rt2x00_dev *rt2x00dev); - -#endif /* RT2800MMIO_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c deleted file mode 100644 index 0af22573a2eb..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ /dev/null @@ -1,471 +0,0 @@ -/* - Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> - Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> - Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> - Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2800pci - Abstract: rt2800pci device specific routines. - Supported chipsets: RT2800E & RT2800ED. - */ - -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/eeprom_93cx6.h> - -#include "rt2x00.h" -#include "rt2x00mmio.h" -#include "rt2x00pci.h" -#include "rt2800lib.h" -#include "rt2800mmio.h" -#include "rt2800.h" -#include "rt2800pci.h" - -/* - * Allow hardware encryption to be disabled. - */ -static bool modparam_nohwcrypt = false; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - -static bool rt2800pci_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) -{ - return modparam_nohwcrypt; -} - -static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) -{ - unsigned int i; - u32 reg; - - /* - * SOC devices don't support MCU requests. - */ - if (rt2x00_is_soc(rt2x00dev)) - return; - - for (i = 0; i < 200; i++) { - rt2x00mmio_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); - - if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) || - (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) || - (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) || - (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token)) - break; - - udelay(REGISTER_BUSY_DELAY); - } - - if (i == 200) - rt2x00_err(rt2x00dev, "MCU request failed, no response from hardware\n"); - - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); -} - -static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); -} - -static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00mmio_register_write(rt2x00dev, E2PROM_CSR, reg); -} - -static int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt2800pci_eepromregister_read; - eeprom.register_write = rt2800pci_eepromregister_write; - switch (rt2x00_get_field32(reg, E2PROM_CSR_TYPE)) - { - case 0: - eeprom.width = PCI_EEPROM_WIDTH_93C46; - break; - case 1: - eeprom.width = PCI_EEPROM_WIDTH_93C66; - break; - default: - eeprom.width = PCI_EEPROM_WIDTH_93C86; - break; - } - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - return 0; -} - -static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) -{ - return rt2800_efuse_detect(rt2x00dev); -} - -static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) -{ - return rt2800_read_eeprom_efuse(rt2x00dev); -} - -/* - * Firmware functions - */ -static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) -{ - /* - * Chip rt3290 use specific 4KB firmware named rt3290.bin. - */ - if (rt2x00_rt(rt2x00dev, RT3290)) - return FIRMWARE_RT3290; - else - return FIRMWARE_RT2860; -} - -static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - u32 reg; - - /* - * enable Host program ram write selection - */ - reg = 0; - rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1); - rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, reg); - - /* - * Write firmware to device. - */ - rt2x00mmio_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, - data, len); - - rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000); - rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001); - - rt2x00mmio_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - - return 0; -} - -/* - * Device state switch handlers. - */ -static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - retval = rt2800mmio_enable_radio(rt2x00dev); - if (retval) - return retval; - - /* After resume MCU_BOOT_SIGNAL will trash these. */ - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); - - rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_RADIO_OFF, 0xff, 0x02); - rt2800pci_mcu_status(rt2x00dev, TOKEN_RADIO_OFF); - - rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP, 0, 0); - rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP); - - return retval; -} - -static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - if (state == STATE_AWAKE) { - rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP, - 0, 0x02); - rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP); - } else if (state == STATE_SLEEP) { - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, - 0xffffffff); - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, - 0xffffffff); - rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_SLEEP, - 0xff, 0x01); - } - - return 0; -} - -static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2800pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - /* - * After the radio has been disabled, the device should - * be put to sleep for powersaving. - */ - rt2800pci_set_state(rt2x00dev, STATE_SLEEP); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - rt2800mmio_toggle_irq(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2800pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * Device probe functions. - */ -static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - if (rt2800pci_efuse_detect(rt2x00dev)) - retval = rt2800pci_read_eeprom_efuse(rt2x00dev); - else - retval = rt2800pci_read_eeprom_pci(rt2x00dev); - - return retval; -} - -static const struct ieee80211_ops rt2800pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_key = rt2x00mac_set_key, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .get_key_seq = rt2800_get_key_seq, - .set_rts_threshold = rt2800_set_rts_threshold, - .sta_add = rt2x00mac_sta_add, - .sta_remove = rt2x00mac_sta_remove, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2800_conf_tx, - .get_tsf = rt2800_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, - .ampdu_action = rt2800_ampdu_action, - .flush = rt2x00mac_flush, - .get_survey = rt2800_get_survey, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2800_ops rt2800pci_rt2800_ops = { - .register_read = rt2x00mmio_register_read, - .register_read_lock = rt2x00mmio_register_read, /* same for PCI */ - .register_write = rt2x00mmio_register_write, - .register_write_lock = rt2x00mmio_register_write, /* same for PCI */ - .register_multiread = rt2x00mmio_register_multiread, - .register_multiwrite = rt2x00mmio_register_multiwrite, - .regbusy_read = rt2x00mmio_regbusy_read, - .read_eeprom = rt2800pci_read_eeprom, - .hwcrypt_disabled = rt2800pci_hwcrypt_disabled, - .drv_write_firmware = rt2800pci_write_firmware, - .drv_init_registers = rt2800mmio_init_registers, - .drv_get_txwi = rt2800mmio_get_txwi, -}; - -static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { - .irq_handler = rt2800mmio_interrupt, - .txstatus_tasklet = rt2800mmio_txstatus_tasklet, - .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet, - .tbtt_tasklet = rt2800mmio_tbtt_tasklet, - .rxdone_tasklet = rt2800mmio_rxdone_tasklet, - .autowake_tasklet = rt2800mmio_autowake_tasklet, - .probe_hw = rt2800_probe_hw, - .get_firmware_name = rt2800pci_get_firmware_name, - .check_firmware = rt2800_check_firmware, - .load_firmware = rt2800_load_firmware, - .initialize = rt2x00mmio_initialize, - .uninitialize = rt2x00mmio_uninitialize, - .get_entry_state = rt2800mmio_get_entry_state, - .clear_entry = rt2800mmio_clear_entry, - .set_device_state = rt2800pci_set_device_state, - .rfkill_poll = rt2800_rfkill_poll, - .link_stats = rt2800_link_stats, - .reset_tuner = rt2800_reset_tuner, - .link_tuner = rt2800_link_tuner, - .gain_calibration = rt2800_gain_calibration, - .vco_calibration = rt2800_vco_calibration, - .start_queue = rt2800mmio_start_queue, - .kick_queue = rt2800mmio_kick_queue, - .stop_queue = rt2800mmio_stop_queue, - .flush_queue = rt2x00mmio_flush_queue, - .write_tx_desc = rt2800mmio_write_tx_desc, - .write_tx_data = rt2800_write_tx_data, - .write_beacon = rt2800_write_beacon, - .clear_beacon = rt2800_clear_beacon, - .fill_rxdone = rt2800mmio_fill_rxdone, - .config_shared_key = rt2800_config_shared_key, - .config_pairwise_key = rt2800_config_pairwise_key, - .config_filter = rt2800_config_filter, - .config_intf = rt2800_config_intf, - .config_erp = rt2800_config_erp, - .config_ant = rt2800_config_ant, - .config = rt2800_config, - .sta_add = rt2800_sta_add, - .sta_remove = rt2800_sta_remove, -}; - -static const struct rt2x00_ops rt2800pci_ops = { - .name = KBUILD_MODNAME, - .drv_data_size = sizeof(struct rt2800_drv_data), - .max_ap_intf = 8, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt2800mmio_queue_init, - .lib = &rt2800pci_rt2x00_ops, - .drv = &rt2800pci_rt2800_ops, - .hw = &rt2800pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT2800pci module information. - */ -static const struct pci_device_id rt2800pci_device_table[] = { - { PCI_DEVICE(0x1814, 0x0601) }, - { PCI_DEVICE(0x1814, 0x0681) }, - { PCI_DEVICE(0x1814, 0x0701) }, - { PCI_DEVICE(0x1814, 0x0781) }, - { PCI_DEVICE(0x1814, 0x3090) }, - { PCI_DEVICE(0x1814, 0x3091) }, - { PCI_DEVICE(0x1814, 0x3092) }, - { PCI_DEVICE(0x1432, 0x7708) }, - { PCI_DEVICE(0x1432, 0x7727) }, - { PCI_DEVICE(0x1432, 0x7728) }, - { PCI_DEVICE(0x1432, 0x7738) }, - { PCI_DEVICE(0x1432, 0x7748) }, - { PCI_DEVICE(0x1432, 0x7758) }, - { PCI_DEVICE(0x1432, 0x7768) }, - { PCI_DEVICE(0x1462, 0x891a) }, - { PCI_DEVICE(0x1a3b, 0x1059) }, -#ifdef CONFIG_RT2800PCI_RT3290 - { PCI_DEVICE(0x1814, 0x3290) }, -#endif -#ifdef CONFIG_RT2800PCI_RT33XX - { PCI_DEVICE(0x1814, 0x3390) }, -#endif -#ifdef CONFIG_RT2800PCI_RT35XX - { PCI_DEVICE(0x1432, 0x7711) }, - { PCI_DEVICE(0x1432, 0x7722) }, - { PCI_DEVICE(0x1814, 0x3060) }, - { PCI_DEVICE(0x1814, 0x3062) }, - { PCI_DEVICE(0x1814, 0x3562) }, - { PCI_DEVICE(0x1814, 0x3592) }, - { PCI_DEVICE(0x1814, 0x3593) }, - { PCI_DEVICE(0x1814, 0x359f) }, -#endif -#ifdef CONFIG_RT2800PCI_RT53XX - { PCI_DEVICE(0x1814, 0x5360) }, - { PCI_DEVICE(0x1814, 0x5362) }, - { PCI_DEVICE(0x1814, 0x5390) }, - { PCI_DEVICE(0x1814, 0x5392) }, - { PCI_DEVICE(0x1814, 0x539a) }, - { PCI_DEVICE(0x1814, 0x539b) }, - { PCI_DEVICE(0x1814, 0x539f) }, -#endif - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); -MODULE_FIRMWARE(FIRMWARE_RT2860); -MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); -MODULE_LICENSE("GPL"); - -static int rt2800pci_probe(struct pci_dev *pci_dev, - const struct pci_device_id *id) -{ - return rt2x00pci_probe(pci_dev, &rt2800pci_ops); -} - -static struct pci_driver rt2800pci_driver = { - .name = KBUILD_MODNAME, - .id_table = rt2800pci_device_table, - .probe = rt2800pci_probe, - .remove = rt2x00pci_remove, - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -module_pci_driver(rt2800pci_driver); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h deleted file mode 100644 index 9dfef4607d6b..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800pci.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> - Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> - Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> - Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2800pci - Abstract: Data structures and registers for the rt2800pci module. - Supported chipsets: RT2800E & RT2800ED. - */ - -#ifndef RT2800PCI_H -#define RT2800PCI_H - -/* - * 8051 firmware image. - */ -#define FIRMWARE_RT2860 "rt2860.bin" -#define FIRMWARE_RT3290 "rt3290.bin" -#define FIRMWARE_IMAGE_BASE 0x2000 - -#endif /* RT2800PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800soc.c b/drivers/net/wireless/rt2x00/rt2800soc.c deleted file mode 100644 index a985a5a7945e..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800soc.c +++ /dev/null @@ -1,260 +0,0 @@ -/* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - * Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> - * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> - * Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - * Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> - * Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - * Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> - * <http://rt2x00.serialmonkey.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* Module: rt2800soc - * Abstract: rt2800 WiSoC specific routines. - */ - -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include "rt2x00.h" -#include "rt2x00mmio.h" -#include "rt2x00soc.h" -#include "rt2800.h" -#include "rt2800lib.h" -#include "rt2800mmio.h" - -/* Allow hardware encryption to be disabled. */ -static bool modparam_nohwcrypt; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - -static bool rt2800soc_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) -{ - return modparam_nohwcrypt; -} - -static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - rt2800_disable_radio(rt2x00dev); - rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0); -} - -static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2800mmio_enable_radio(rt2x00dev); - break; - - case STATE_RADIO_OFF: - rt2800soc_disable_radio(rt2x00dev); - break; - - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - rt2800mmio_toggle_irq(rt2x00dev, state); - break; - - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - /* These states are not supported, but don't report an error */ - retval = 0; - break; - - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev) -{ - void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); - - if (!base_addr) - return -ENOMEM; - - memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); - - iounmap(base_addr); - return 0; -} - -/* Firmware functions */ -static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev) -{ - WARN_ON_ONCE(1); - return NULL; -} - -static int rt2800soc_load_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - WARN_ON_ONCE(1); - return 0; -} - -static int rt2800soc_check_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - WARN_ON_ONCE(1); - return 0; -} - -static int rt2800soc_write_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - WARN_ON_ONCE(1); - return 0; -} - -static const struct ieee80211_ops rt2800soc_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_key = rt2x00mac_set_key, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .get_key_seq = rt2800_get_key_seq, - .set_rts_threshold = rt2800_set_rts_threshold, - .sta_add = rt2x00mac_sta_add, - .sta_remove = rt2x00mac_sta_remove, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2800_conf_tx, - .get_tsf = rt2800_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, - .ampdu_action = rt2800_ampdu_action, - .flush = rt2x00mac_flush, - .get_survey = rt2800_get_survey, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2800_ops rt2800soc_rt2800_ops = { - .register_read = rt2x00mmio_register_read, - .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */ - .register_write = rt2x00mmio_register_write, - .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */ - .register_multiread = rt2x00mmio_register_multiread, - .register_multiwrite = rt2x00mmio_register_multiwrite, - .regbusy_read = rt2x00mmio_regbusy_read, - .read_eeprom = rt2800soc_read_eeprom, - .hwcrypt_disabled = rt2800soc_hwcrypt_disabled, - .drv_write_firmware = rt2800soc_write_firmware, - .drv_init_registers = rt2800mmio_init_registers, - .drv_get_txwi = rt2800mmio_get_txwi, -}; - -static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = { - .irq_handler = rt2800mmio_interrupt, - .txstatus_tasklet = rt2800mmio_txstatus_tasklet, - .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet, - .tbtt_tasklet = rt2800mmio_tbtt_tasklet, - .rxdone_tasklet = rt2800mmio_rxdone_tasklet, - .autowake_tasklet = rt2800mmio_autowake_tasklet, - .probe_hw = rt2800_probe_hw, - .get_firmware_name = rt2800soc_get_firmware_name, - .check_firmware = rt2800soc_check_firmware, - .load_firmware = rt2800soc_load_firmware, - .initialize = rt2x00mmio_initialize, - .uninitialize = rt2x00mmio_uninitialize, - .get_entry_state = rt2800mmio_get_entry_state, - .clear_entry = rt2800mmio_clear_entry, - .set_device_state = rt2800soc_set_device_state, - .rfkill_poll = rt2800_rfkill_poll, - .link_stats = rt2800_link_stats, - .reset_tuner = rt2800_reset_tuner, - .link_tuner = rt2800_link_tuner, - .gain_calibration = rt2800_gain_calibration, - .vco_calibration = rt2800_vco_calibration, - .start_queue = rt2800mmio_start_queue, - .kick_queue = rt2800mmio_kick_queue, - .stop_queue = rt2800mmio_stop_queue, - .flush_queue = rt2x00mmio_flush_queue, - .write_tx_desc = rt2800mmio_write_tx_desc, - .write_tx_data = rt2800_write_tx_data, - .write_beacon = rt2800_write_beacon, - .clear_beacon = rt2800_clear_beacon, - .fill_rxdone = rt2800mmio_fill_rxdone, - .config_shared_key = rt2800_config_shared_key, - .config_pairwise_key = rt2800_config_pairwise_key, - .config_filter = rt2800_config_filter, - .config_intf = rt2800_config_intf, - .config_erp = rt2800_config_erp, - .config_ant = rt2800_config_ant, - .config = rt2800_config, - .sta_add = rt2800_sta_add, - .sta_remove = rt2800_sta_remove, -}; - -static const struct rt2x00_ops rt2800soc_ops = { - .name = KBUILD_MODNAME, - .drv_data_size = sizeof(struct rt2800_drv_data), - .max_ap_intf = 8, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt2800mmio_queue_init, - .lib = &rt2800soc_rt2x00_ops, - .drv = &rt2800soc_rt2800_ops, - .hw = &rt2800soc_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -static int rt2800soc_probe(struct platform_device *pdev) -{ - return rt2x00soc_probe(pdev, &rt2800soc_ops); -} - -static struct platform_driver rt2800soc_driver = { - .driver = { - .name = "rt2800_wmac", - .mod_name = KBUILD_MODNAME, - }, - .probe = rt2800soc_probe, - .remove = rt2x00soc_remove, - .suspend = rt2x00soc_suspend, - .resume = rt2x00soc_resume, -}; - -module_platform_driver(rt2800soc_driver); - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink WiSoC Wireless LAN driver."); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c deleted file mode 100644 index bf9afbf46c1b..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ /dev/null @@ -1,1462 +0,0 @@ -/* - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2800usb - Abstract: rt2800usb device specific routines. - Supported chipsets: RT2800U. - */ - -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/usb.h> - -#include "rt2x00.h" -#include "rt2x00usb.h" -#include "rt2800lib.h" -#include "rt2800.h" -#include "rt2800usb.h" - -/* - * Allow hardware encryption to be disabled. - */ -static bool modparam_nohwcrypt; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - -static bool rt2800usb_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) -{ - return modparam_nohwcrypt; -} - -/* - * Queue handlers. - */ -static void rt2800usb_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - break; - case QID_BEACON: - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - break; - default: - break; - } -} - -static void rt2800usb_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - break; - case QID_BEACON: - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - break; - default: - break; - } -} - -/* - * test if there is an entry in any TX queue for which DMA is done - * but the TX status has not been returned yet - */ -static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - tx_queue_for_each(rt2x00dev, queue) { - if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) != - rt2x00queue_get_entry(queue, Q_INDEX_DONE)) - return true; - } - return false; -} - -static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry) -{ - bool tout; - - if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) - return false; - - tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100)); - if (unlikely(tout)) - rt2x00_dbg(entry->queue->rt2x00dev, - "TX status timeout for entry %d in queue %d\n", - entry->entry_idx, entry->queue->qid); - return tout; - -} - -static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - struct queue_entry *entry; - - tx_queue_for_each(rt2x00dev, queue) { - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - if (rt2800usb_entry_txstatus_timeout(entry)) - return true; - } - return false; -} - -#define TXSTATUS_READ_INTERVAL 1000000 - -static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev, - int urb_status, u32 tx_status) -{ - bool valid; - - if (urb_status) { - rt2x00_warn(rt2x00dev, "TX status read failed %d\n", - urb_status); - - goto stop_reading; - } - - valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID); - if (valid) { - if (!kfifo_put(&rt2x00dev->txstatus_fifo, tx_status)) - rt2x00_warn(rt2x00dev, "TX status FIFO overrun\n"); - - queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work); - - /* Reschedule urb to read TX status again instantly */ - return true; - } - - /* Check if there is any entry that timedout waiting on TX status */ - if (rt2800usb_txstatus_timeout(rt2x00dev)) - queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work); - - if (rt2800usb_txstatus_pending(rt2x00dev)) { - /* Read register after 1 ms */ - hrtimer_start(&rt2x00dev->txstatus_timer, - ktime_set(0, TXSTATUS_READ_INTERVAL), - HRTIMER_MODE_REL); - return false; - } - -stop_reading: - clear_bit(TX_STATUS_READING, &rt2x00dev->flags); - /* - * There is small race window above, between txstatus pending check and - * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck - * here again if status reading is needed. - */ - if (rt2800usb_txstatus_pending(rt2x00dev) && - !test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags)) - return true; - else - return false; -} - -static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev) -{ - - if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags)) - return; - - /* Read TX_STA_FIFO register after 2 ms */ - hrtimer_start(&rt2x00dev->txstatus_timer, - ktime_set(0, 2*TXSTATUS_READ_INTERVAL), - HRTIMER_MODE_REL); -} - -static void rt2800usb_tx_dma_done(struct queue_entry *entry) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - - rt2800usb_async_read_tx_status(rt2x00dev); -} - -static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer) -{ - struct rt2x00_dev *rt2x00dev = - container_of(timer, struct rt2x00_dev, txstatus_timer); - - rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO, - rt2800usb_tx_sta_fifo_read_completed); - - return HRTIMER_NORESTART; -} - -/* - * Firmware functions - */ -static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev) -{ - __le32 *reg; - u32 fw_mode; - int ret; - - reg = kmalloc(sizeof(*reg), GFP_KERNEL); - if (reg == NULL) - return -ENOMEM; - /* cannot use rt2x00usb_register_read here as it uses different - * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the - * magic value USB_MODE_AUTORUN (0x11) to the device, thus the - * returned value would be invalid. - */ - ret = rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE, - USB_VENDOR_REQUEST_IN, 0, - USB_MODE_AUTORUN, reg, sizeof(*reg), - REGISTER_TIMEOUT_FIRMWARE); - fw_mode = le32_to_cpu(*reg); - kfree(reg); - if (ret < 0) - return ret; - - if ((fw_mode & 0x00000003) == 2) - return 1; - - return 0; -} - -static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) -{ - return FIRMWARE_RT2870; -} - -static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - int status; - u32 offset; - u32 length; - int retval; - - /* - * Check which section of the firmware we need. - */ - if (rt2x00_rt(rt2x00dev, RT2860) || - rt2x00_rt(rt2x00dev, RT2872) || - rt2x00_rt(rt2x00dev, RT3070)) { - offset = 0; - length = 4096; - } else { - offset = 4096; - length = 4096; - } - - /* - * Write firmware to device. - */ - retval = rt2800usb_autorun_detect(rt2x00dev); - if (retval < 0) - return retval; - if (retval) { - rt2x00_info(rt2x00dev, - "Firmware loading not required - NIC in AutoRun mode\n"); - __clear_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); - } else { - rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, - data + offset, length); - } - - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); - - /* - * Send firmware request to device to load firmware, - * we need to specify a long timeout time. - */ - status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, - 0, USB_MODE_FIRMWARE, - REGISTER_TIMEOUT_FIRMWARE); - if (status < 0) { - rt2x00_err(rt2x00dev, "Failed to write Firmware to device\n"); - return status; - } - - msleep(10); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - - return 0; -} - -/* - * Device state switch handlers. - */ -static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Wait until BBP and RF are ready. - */ - if (rt2800_wait_csr_ready(rt2x00dev)) - return -EBUSY; - - rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); - rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); - - reg = 0; - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, - USB_MODE_RESET, REGISTER_TIMEOUT); - - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - return 0; -} - -static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev))) - return -EIO; - - rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®); - rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); - rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0); - rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128); - /* - * Total room for RX frames in kilobytes, PBF might still exceed - * this limit so reduce the number to prevent errors. - */ - rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT, - ((rt2x00dev->rx->limit * DATA_FRAME_SIZE) - / 1024) - 3); - rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); - rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); - - return rt2800_enable_radio(rt2x00dev); -} - -static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - rt2800_disable_radio(rt2x00dev); -} - -static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - if (state == STATE_AWAKE) - rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2); - else - rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2); - - return 0; -} - -static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - /* - * Before the radio can be enabled, the device first has - * to be woken up. After that it needs a bit of time - * to be fully awake and then the radio can be enabled. - */ - rt2800usb_set_state(rt2x00dev, STATE_AWAKE); - msleep(1); - retval = rt2800usb_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - /* - * After the radio has been disabled, the device should - * be put to sleep for powersaving. - */ - rt2800usb_disable_radio(rt2x00dev); - rt2800usb_set_state(rt2x00dev, STATE_SLEEP); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - /* No support, but no error either */ - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2800usb_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * Watchdog handlers - */ -static void rt2800usb_watchdog(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, ®); - if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) { - rt2x00_warn(rt2x00dev, "TX HW queue 0 timed out, invoke forced kick\n"); - - rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40012); - - for (i = 0; i < 10; i++) { - udelay(10); - if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) - break; - } - - rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006); - } - - rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, ®); - if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) { - rt2x00_warn(rt2x00dev, "TX HW queue 1 timed out, invoke forced kick\n"); - - rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf4000a); - - for (i = 0; i < 10; i++) { - udelay(10); - if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) - break; - } - - rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006); - } - - rt2x00usb_watchdog(rt2x00dev); -} - -/* - * TX descriptor initialization - */ -static __le32 *rt2800usb_get_txwi(struct queue_entry *entry) -{ - if (entry->queue->qid == QID_BEACON) - return (__le32 *) (entry->skb->data); - else - return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE); -} - -static void rt2800usb_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - __le32 *txi = (__le32 *) entry->skb->data; - u32 word; - - /* - * Initialize TXINFO descriptor - */ - rt2x00_desc_read(txi, 0, &word); - - /* - * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is - * TXWI + 802.11 header + L2 pad + payload + pad, - * so need to decrease size of TXINFO. - */ - rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, - roundup(entry->skb->len, 4) - TXINFO_DESC_SIZE); - rt2x00_set_field32(&word, TXINFO_W0_WIV, - !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); - rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); - rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); - rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0); - rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST, - test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_desc_write(txi, 0, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->flags |= SKBDESC_DESC_IN_SKB; - skbdesc->desc = txi; - skbdesc->desc_len = TXINFO_DESC_SIZE + entry->queue->winfo_size; -} - -/* - * TX data initialization - */ -static int rt2800usb_get_tx_data_len(struct queue_entry *entry) -{ - /* - * pad(1~3 bytes) is needed after each 802.11 payload. - * USB end pad(4 bytes) is needed at each USB bulk out packet end. - * TX frame format is : - * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad | - * |<------------- tx_pkt_len ------------->| - */ - - return roundup(entry->skb->len, 4) + 4; -} - -/* - * TX control handlers - */ -static enum txdone_entry_desc_flags -rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg) -{ - __le32 *txwi; - u32 word; - int wcid, ack, pid; - int tx_wcid, tx_ack, tx_pid, is_agg; - - /* - * This frames has returned with an IO error, - * so the status report is not intended for this - * frame. - */ - if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) - return TXDONE_FAILURE; - - wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); - ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); - pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); - is_agg = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE); - - /* - * Validate if this TX status report is intended for - * this entry by comparing the WCID/ACK/PID fields. - */ - txwi = rt2800usb_get_txwi(entry); - - rt2x00_desc_read(txwi, 1, &word); - tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); - tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); - tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); - - if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) { - rt2x00_dbg(entry->queue->rt2x00dev, - "TX status report missed for queue %d entry %d\n", - entry->queue->qid, entry->entry_idx); - return TXDONE_UNKNOWN; - } - - return TXDONE_SUCCESS; -} - -static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - struct queue_entry *entry; - u32 reg; - u8 qid; - enum txdone_entry_desc_flags done_status; - - while (kfifo_get(&rt2x00dev->txstatus_fifo, ®)) { - /* - * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is - * guaranteed to be one of the TX QIDs . - */ - qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE); - queue = rt2x00queue_get_tx_queue(rt2x00dev, qid); - - if (unlikely(rt2x00queue_empty(queue))) { - rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n", - qid); - break; - } - - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - - if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || - !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) { - rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n", - entry->entry_idx, qid); - break; - } - - done_status = rt2800usb_txdone_entry_check(entry, reg); - if (likely(done_status == TXDONE_SUCCESS)) - rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry)); - else - rt2x00lib_txdone_noinfo(entry, done_status); - } -} - -static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - struct queue_entry *entry; - - /* - * Process any trailing TX status reports for IO failures, - * we loop until we find the first non-IO error entry. This - * can either be a frame which is free, is being uploaded, - * or has completed the upload but didn't have an entry - * in the TX_STAT_FIFO register yet. - */ - tx_queue_for_each(rt2x00dev, queue) { - while (!rt2x00queue_empty(queue)) { - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - - if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || - !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) - break; - - if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) - rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); - else if (rt2800usb_entry_txstatus_timeout(entry)) - rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN); - else - break; - } - } -} - -static void rt2800usb_work_txdone(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, txdone_work); - - while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) || - rt2800usb_txstatus_timeout(rt2x00dev)) { - - rt2800usb_txdone(rt2x00dev); - - rt2800usb_txdone_nostatus(rt2x00dev); - - /* - * The hw may delay sending the packet after DMA complete - * if the medium is busy, thus the TX_STA_FIFO entry is - * also delayed -> use a timer to retrieve it. - */ - if (rt2800usb_txstatus_pending(rt2x00dev)) - rt2800usb_async_read_tx_status(rt2x00dev); - } -} - -/* - * RX control handlers - */ -static void rt2800usb_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - __le32 *rxi = (__le32 *)entry->skb->data; - __le32 *rxd; - u32 word; - int rx_pkt_len; - - /* - * Copy descriptor to the skbdesc->desc buffer, making it safe from - * moving of frame data in rt2x00usb. - */ - memcpy(skbdesc->desc, rxi, skbdesc->desc_len); - - /* - * RX frame format is : - * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad | - * |<------------ rx_pkt_len -------------->| - */ - rt2x00_desc_read(rxi, 0, &word); - rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN); - - /* - * Remove the RXINFO structure from the sbk. - */ - skb_pull(entry->skb, RXINFO_DESC_SIZE); - - /* - * Check for rx_pkt_len validity. Return if invalid, leaving - * rxdesc->size zeroed out by the upper level. - */ - if (unlikely(rx_pkt_len == 0 || - rx_pkt_len > entry->queue->data_size)) { - rt2x00_err(entry->queue->rt2x00dev, - "Bad frame size %d, forcing to 0\n", rx_pkt_len); - return; - } - - rxd = (__le32 *)(entry->skb->data + rx_pkt_len); - - /* - * It is now safe to read the descriptor on all architectures. - */ - rt2x00_desc_read(rxd, 0, &word); - - if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - - rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR); - - if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) { - /* - * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. Unfortunately the descriptor doesn't contain - * any fields with the EIV/IV data either, so they can't - * be restored by rt2x00lib. - */ - rxdesc->flags |= RX_FLAG_IV_STRIPPED; - - /* - * The hardware has already checked the Michael Mic and has - * stripped it from the frame. Signal this to mac80211. - */ - rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; - - if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) - rxdesc->flags |= RX_FLAG_DECRYPTED; - else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) - rxdesc->flags |= RX_FLAG_MMIC_ERROR; - } - - if (rt2x00_get_field32(word, RXD_W0_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; - - if (rt2x00_get_field32(word, RXD_W0_L2PAD)) - rxdesc->dev_flags |= RXDONE_L2PAD; - - /* - * Remove RXD descriptor from end of buffer. - */ - skb_trim(entry->skb, rx_pkt_len); - - /* - * Process the RXWI structure. - */ - rt2800_process_rxwi(entry, rxdesc); -} - -/* - * Device probe functions. - */ -static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - retval = rt2800usb_autorun_detect(rt2x00dev); - if (retval < 0) - return retval; - if (retval) - return 1; - return rt2800_efuse_detect(rt2x00dev); -} - -static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - retval = rt2800usb_efuse_detect(rt2x00dev); - if (retval < 0) - return retval; - if (retval) - retval = rt2800_read_eeprom_efuse(rt2x00dev); - else - retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, - EEPROM_SIZE); - - return retval; -} - -static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - retval = rt2800_probe_hw(rt2x00dev); - if (retval) - return retval; - - /* - * Set txstatus timer function. - */ - rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout; - - /* - * Overwrite TX done handler - */ - INIT_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone); - - return 0; -} - -static const struct ieee80211_ops rt2800usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_tim = rt2x00mac_set_tim, - .set_key = rt2x00mac_set_key, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .get_key_seq = rt2800_get_key_seq, - .set_rts_threshold = rt2800_set_rts_threshold, - .sta_add = rt2x00mac_sta_add, - .sta_remove = rt2x00mac_sta_remove, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2800_conf_tx, - .get_tsf = rt2800_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, - .ampdu_action = rt2800_ampdu_action, - .flush = rt2x00mac_flush, - .get_survey = rt2800_get_survey, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2800_ops rt2800usb_rt2800_ops = { - .register_read = rt2x00usb_register_read, - .register_read_lock = rt2x00usb_register_read_lock, - .register_write = rt2x00usb_register_write, - .register_write_lock = rt2x00usb_register_write_lock, - .register_multiread = rt2x00usb_register_multiread, - .register_multiwrite = rt2x00usb_register_multiwrite, - .regbusy_read = rt2x00usb_regbusy_read, - .read_eeprom = rt2800usb_read_eeprom, - .hwcrypt_disabled = rt2800usb_hwcrypt_disabled, - .drv_write_firmware = rt2800usb_write_firmware, - .drv_init_registers = rt2800usb_init_registers, - .drv_get_txwi = rt2800usb_get_txwi, -}; - -static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { - .probe_hw = rt2800usb_probe_hw, - .get_firmware_name = rt2800usb_get_firmware_name, - .check_firmware = rt2800_check_firmware, - .load_firmware = rt2800_load_firmware, - .initialize = rt2x00usb_initialize, - .uninitialize = rt2x00usb_uninitialize, - .clear_entry = rt2x00usb_clear_entry, - .set_device_state = rt2800usb_set_device_state, - .rfkill_poll = rt2800_rfkill_poll, - .link_stats = rt2800_link_stats, - .reset_tuner = rt2800_reset_tuner, - .link_tuner = rt2800_link_tuner, - .gain_calibration = rt2800_gain_calibration, - .vco_calibration = rt2800_vco_calibration, - .watchdog = rt2800usb_watchdog, - .start_queue = rt2800usb_start_queue, - .kick_queue = rt2x00usb_kick_queue, - .stop_queue = rt2800usb_stop_queue, - .flush_queue = rt2x00usb_flush_queue, - .tx_dma_done = rt2800usb_tx_dma_done, - .write_tx_desc = rt2800usb_write_tx_desc, - .write_tx_data = rt2800_write_tx_data, - .write_beacon = rt2800_write_beacon, - .clear_beacon = rt2800_clear_beacon, - .get_tx_data_len = rt2800usb_get_tx_data_len, - .fill_rxdone = rt2800usb_fill_rxdone, - .config_shared_key = rt2800_config_shared_key, - .config_pairwise_key = rt2800_config_pairwise_key, - .config_filter = rt2800_config_filter, - .config_intf = rt2800_config_intf, - .config_erp = rt2800_config_erp, - .config_ant = rt2800_config_ant, - .config = rt2800_config, - .sta_add = rt2800_sta_add, - .sta_remove = rt2800_sta_remove, -}; - -static void rt2800usb_queue_init(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - unsigned short txwi_size, rxwi_size; - - rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size); - - switch (queue->qid) { - case QID_RX: - queue->limit = 128; - queue->data_size = AGGREGATION_SIZE; - queue->desc_size = RXINFO_DESC_SIZE; - queue->winfo_size = rxwi_size; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 16; - queue->data_size = AGGREGATION_SIZE; - queue->desc_size = TXINFO_DESC_SIZE; - queue->winfo_size = txwi_size; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_BEACON: - queue->limit = 8; - queue->data_size = MGMT_FRAME_SIZE; - queue->desc_size = TXINFO_DESC_SIZE; - queue->winfo_size = txwi_size; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_ATIM: - /* fallthrough */ - default: - BUG(); - break; - } -} - -static const struct rt2x00_ops rt2800usb_ops = { - .name = KBUILD_MODNAME, - .drv_data_size = sizeof(struct rt2800_drv_data), - .max_ap_intf = 8, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt2800usb_queue_init, - .lib = &rt2800usb_rt2x00_ops, - .drv = &rt2800usb_rt2800_ops, - .hw = &rt2800usb_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * rt2800usb module information. - */ -static struct usb_device_id rt2800usb_device_table[] = { - /* Abocom */ - { USB_DEVICE(0x07b8, 0x2870) }, - { USB_DEVICE(0x07b8, 0x2770) }, - { USB_DEVICE(0x07b8, 0x3070) }, - { USB_DEVICE(0x07b8, 0x3071) }, - { USB_DEVICE(0x07b8, 0x3072) }, - { USB_DEVICE(0x1482, 0x3c09) }, - /* AirTies */ - { USB_DEVICE(0x1eda, 0x2012) }, - { USB_DEVICE(0x1eda, 0x2210) }, - { USB_DEVICE(0x1eda, 0x2310) }, - /* Allwin */ - { USB_DEVICE(0x8516, 0x2070) }, - { USB_DEVICE(0x8516, 0x2770) }, - { USB_DEVICE(0x8516, 0x2870) }, - { USB_DEVICE(0x8516, 0x3070) }, - { USB_DEVICE(0x8516, 0x3071) }, - { USB_DEVICE(0x8516, 0x3072) }, - /* Alpha Networks */ - { USB_DEVICE(0x14b2, 0x3c06) }, - { USB_DEVICE(0x14b2, 0x3c07) }, - { USB_DEVICE(0x14b2, 0x3c09) }, - { USB_DEVICE(0x14b2, 0x3c12) }, - { USB_DEVICE(0x14b2, 0x3c23) }, - { USB_DEVICE(0x14b2, 0x3c25) }, - { USB_DEVICE(0x14b2, 0x3c27) }, - { USB_DEVICE(0x14b2, 0x3c28) }, - { USB_DEVICE(0x14b2, 0x3c2c) }, - /* Amit */ - { USB_DEVICE(0x15c5, 0x0008) }, - /* Askey */ - { USB_DEVICE(0x1690, 0x0740) }, - /* ASUS */ - { USB_DEVICE(0x0b05, 0x1731) }, - { USB_DEVICE(0x0b05, 0x1732) }, - { USB_DEVICE(0x0b05, 0x1742) }, - { USB_DEVICE(0x0b05, 0x1784) }, - { USB_DEVICE(0x1761, 0x0b05) }, - /* AzureWave */ - { USB_DEVICE(0x13d3, 0x3247) }, - { USB_DEVICE(0x13d3, 0x3273) }, - { USB_DEVICE(0x13d3, 0x3305) }, - { USB_DEVICE(0x13d3, 0x3307) }, - { USB_DEVICE(0x13d3, 0x3321) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x8053) }, - { USB_DEVICE(0x050d, 0x805c) }, - { USB_DEVICE(0x050d, 0x815c) }, - { USB_DEVICE(0x050d, 0x825a) }, - { USB_DEVICE(0x050d, 0x825b) }, - { USB_DEVICE(0x050d, 0x935a) }, - { USB_DEVICE(0x050d, 0x935b) }, - /* Buffalo */ - { USB_DEVICE(0x0411, 0x00e8) }, - { USB_DEVICE(0x0411, 0x0158) }, - { USB_DEVICE(0x0411, 0x015d) }, - { USB_DEVICE(0x0411, 0x016f) }, - { USB_DEVICE(0x0411, 0x01a2) }, - { USB_DEVICE(0x0411, 0x01ee) }, - { USB_DEVICE(0x0411, 0x01a8) }, - /* Corega */ - { USB_DEVICE(0x07aa, 0x002f) }, - { USB_DEVICE(0x07aa, 0x003c) }, - { USB_DEVICE(0x07aa, 0x003f) }, - { USB_DEVICE(0x18c5, 0x0012) }, - /* D-Link */ - { USB_DEVICE(0x07d1, 0x3c09) }, - { USB_DEVICE(0x07d1, 0x3c0a) }, - { USB_DEVICE(0x07d1, 0x3c0d) }, - { USB_DEVICE(0x07d1, 0x3c0e) }, - { USB_DEVICE(0x07d1, 0x3c0f) }, - { USB_DEVICE(0x07d1, 0x3c11) }, - { USB_DEVICE(0x07d1, 0x3c13) }, - { USB_DEVICE(0x07d1, 0x3c15) }, - { USB_DEVICE(0x07d1, 0x3c16) }, - { USB_DEVICE(0x07d1, 0x3c17) }, - { USB_DEVICE(0x2001, 0x3317) }, - { USB_DEVICE(0x2001, 0x3c1b) }, - { USB_DEVICE(0x2001, 0x3c25) }, - /* Draytek */ - { USB_DEVICE(0x07fa, 0x7712) }, - /* DVICO */ - { USB_DEVICE(0x0fe9, 0xb307) }, - /* Edimax */ - { USB_DEVICE(0x7392, 0x4085) }, - { USB_DEVICE(0x7392, 0x7711) }, - { USB_DEVICE(0x7392, 0x7717) }, - { USB_DEVICE(0x7392, 0x7718) }, - { USB_DEVICE(0x7392, 0x7722) }, - /* Encore */ - { USB_DEVICE(0x203d, 0x1480) }, - { USB_DEVICE(0x203d, 0x14a9) }, - /* EnGenius */ - { USB_DEVICE(0x1740, 0x9701) }, - { USB_DEVICE(0x1740, 0x9702) }, - { USB_DEVICE(0x1740, 0x9703) }, - { USB_DEVICE(0x1740, 0x9705) }, - { USB_DEVICE(0x1740, 0x9706) }, - { USB_DEVICE(0x1740, 0x9707) }, - { USB_DEVICE(0x1740, 0x9708) }, - { USB_DEVICE(0x1740, 0x9709) }, - /* Gemtek */ - { USB_DEVICE(0x15a9, 0x0012) }, - /* Gigabyte */ - { USB_DEVICE(0x1044, 0x800b) }, - { USB_DEVICE(0x1044, 0x800d) }, - /* Hawking */ - { USB_DEVICE(0x0e66, 0x0001) }, - { USB_DEVICE(0x0e66, 0x0003) }, - { USB_DEVICE(0x0e66, 0x0009) }, - { USB_DEVICE(0x0e66, 0x000b) }, - { USB_DEVICE(0x0e66, 0x0013) }, - { USB_DEVICE(0x0e66, 0x0017) }, - { USB_DEVICE(0x0e66, 0x0018) }, - /* I-O DATA */ - { USB_DEVICE(0x04bb, 0x0945) }, - { USB_DEVICE(0x04bb, 0x0947) }, - { USB_DEVICE(0x04bb, 0x0948) }, - /* Linksys */ - { USB_DEVICE(0x13b1, 0x0031) }, - { USB_DEVICE(0x1737, 0x0070) }, - { USB_DEVICE(0x1737, 0x0071) }, - { USB_DEVICE(0x1737, 0x0077) }, - { USB_DEVICE(0x1737, 0x0078) }, - /* Logitec */ - { USB_DEVICE(0x0789, 0x0162) }, - { USB_DEVICE(0x0789, 0x0163) }, - { USB_DEVICE(0x0789, 0x0164) }, - { USB_DEVICE(0x0789, 0x0166) }, - /* Motorola */ - { USB_DEVICE(0x100d, 0x9031) }, - /* MSI */ - { USB_DEVICE(0x0db0, 0x3820) }, - { USB_DEVICE(0x0db0, 0x3821) }, - { USB_DEVICE(0x0db0, 0x3822) }, - { USB_DEVICE(0x0db0, 0x3870) }, - { USB_DEVICE(0x0db0, 0x3871) }, - { USB_DEVICE(0x0db0, 0x6899) }, - { USB_DEVICE(0x0db0, 0x821a) }, - { USB_DEVICE(0x0db0, 0x822a) }, - { USB_DEVICE(0x0db0, 0x822b) }, - { USB_DEVICE(0x0db0, 0x822c) }, - { USB_DEVICE(0x0db0, 0x870a) }, - { USB_DEVICE(0x0db0, 0x871a) }, - { USB_DEVICE(0x0db0, 0x871b) }, - { USB_DEVICE(0x0db0, 0x871c) }, - { USB_DEVICE(0x0db0, 0x899a) }, - /* Ovislink */ - { USB_DEVICE(0x1b75, 0x3070) }, - { USB_DEVICE(0x1b75, 0x3071) }, - { USB_DEVICE(0x1b75, 0x3072) }, - { USB_DEVICE(0x1b75, 0xa200) }, - /* Para */ - { USB_DEVICE(0x20b8, 0x8888) }, - /* Pegatron */ - { USB_DEVICE(0x1d4d, 0x0002) }, - { USB_DEVICE(0x1d4d, 0x000c) }, - { USB_DEVICE(0x1d4d, 0x000e) }, - { USB_DEVICE(0x1d4d, 0x0011) }, - /* Philips */ - { USB_DEVICE(0x0471, 0x200f) }, - /* Planex */ - { USB_DEVICE(0x2019, 0x5201) }, - { USB_DEVICE(0x2019, 0xab25) }, - { USB_DEVICE(0x2019, 0xed06) }, - /* Quanta */ - { USB_DEVICE(0x1a32, 0x0304) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x2070) }, - { USB_DEVICE(0x148f, 0x2770) }, - { USB_DEVICE(0x148f, 0x2870) }, - { USB_DEVICE(0x148f, 0x3070) }, - { USB_DEVICE(0x148f, 0x3071) }, - { USB_DEVICE(0x148f, 0x3072) }, - /* Samsung */ - { USB_DEVICE(0x04e8, 0x2018) }, - /* Siemens */ - { USB_DEVICE(0x129b, 0x1828) }, - /* Sitecom */ - { USB_DEVICE(0x0df6, 0x0017) }, - { USB_DEVICE(0x0df6, 0x002b) }, - { USB_DEVICE(0x0df6, 0x002c) }, - { USB_DEVICE(0x0df6, 0x002d) }, - { USB_DEVICE(0x0df6, 0x0039) }, - { USB_DEVICE(0x0df6, 0x003b) }, - { USB_DEVICE(0x0df6, 0x003d) }, - { USB_DEVICE(0x0df6, 0x003e) }, - { USB_DEVICE(0x0df6, 0x003f) }, - { USB_DEVICE(0x0df6, 0x0040) }, - { USB_DEVICE(0x0df6, 0x0042) }, - { USB_DEVICE(0x0df6, 0x0047) }, - { USB_DEVICE(0x0df6, 0x0048) }, - { USB_DEVICE(0x0df6, 0x0051) }, - { USB_DEVICE(0x0df6, 0x005f) }, - { USB_DEVICE(0x0df6, 0x0060) }, - /* SMC */ - { USB_DEVICE(0x083a, 0x6618) }, - { USB_DEVICE(0x083a, 0x7511) }, - { USB_DEVICE(0x083a, 0x7512) }, - { USB_DEVICE(0x083a, 0x7522) }, - { USB_DEVICE(0x083a, 0x8522) }, - { USB_DEVICE(0x083a, 0xa618) }, - { USB_DEVICE(0x083a, 0xa701) }, - { USB_DEVICE(0x083a, 0xa702) }, - { USB_DEVICE(0x083a, 0xa703) }, - { USB_DEVICE(0x083a, 0xb522) }, - /* Sparklan */ - { USB_DEVICE(0x15a9, 0x0006) }, - /* Sweex */ - { USB_DEVICE(0x177f, 0x0153) }, - { USB_DEVICE(0x177f, 0x0164) }, - { USB_DEVICE(0x177f, 0x0302) }, - { USB_DEVICE(0x177f, 0x0313) }, - { USB_DEVICE(0x177f, 0x0323) }, - { USB_DEVICE(0x177f, 0x0324) }, - /* U-Media */ - { USB_DEVICE(0x157e, 0x300e) }, - { USB_DEVICE(0x157e, 0x3013) }, - /* ZCOM */ - { USB_DEVICE(0x0cde, 0x0022) }, - { USB_DEVICE(0x0cde, 0x0025) }, - /* Zinwell */ - { USB_DEVICE(0x5a57, 0x0280) }, - { USB_DEVICE(0x5a57, 0x0282) }, - { USB_DEVICE(0x5a57, 0x0283) }, - { USB_DEVICE(0x5a57, 0x5257) }, - /* Zyxel */ - { USB_DEVICE(0x0586, 0x3416) }, - { USB_DEVICE(0x0586, 0x3418) }, - { USB_DEVICE(0x0586, 0x341a) }, - { USB_DEVICE(0x0586, 0x341e) }, - { USB_DEVICE(0x0586, 0x343e) }, -#ifdef CONFIG_RT2800USB_RT33XX - /* Belkin */ - { USB_DEVICE(0x050d, 0x945b) }, - /* D-Link */ - { USB_DEVICE(0x2001, 0x3c17) }, - /* Panasonic */ - { USB_DEVICE(0x083a, 0xb511) }, - /* Philips */ - { USB_DEVICE(0x0471, 0x20dd) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x3370) }, - { USB_DEVICE(0x148f, 0x8070) }, - /* Sitecom */ - { USB_DEVICE(0x0df6, 0x0050) }, - /* Sweex */ - { USB_DEVICE(0x177f, 0x0163) }, - { USB_DEVICE(0x177f, 0x0165) }, -#endif -#ifdef CONFIG_RT2800USB_RT35XX - /* Allwin */ - { USB_DEVICE(0x8516, 0x3572) }, - /* Askey */ - { USB_DEVICE(0x1690, 0x0744) }, - { USB_DEVICE(0x1690, 0x0761) }, - { USB_DEVICE(0x1690, 0x0764) }, - /* ASUS */ - { USB_DEVICE(0x0b05, 0x179d) }, - /* Cisco */ - { USB_DEVICE(0x167b, 0x4001) }, - /* EnGenius */ - { USB_DEVICE(0x1740, 0x9801) }, - /* I-O DATA */ - { USB_DEVICE(0x04bb, 0x0944) }, - /* Linksys */ - { USB_DEVICE(0x13b1, 0x002f) }, - { USB_DEVICE(0x1737, 0x0079) }, - /* Logitec */ - { USB_DEVICE(0x0789, 0x0170) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x3572) }, - /* Sitecom */ - { USB_DEVICE(0x0df6, 0x0041) }, - { USB_DEVICE(0x0df6, 0x0062) }, - { USB_DEVICE(0x0df6, 0x0065) }, - { USB_DEVICE(0x0df6, 0x0066) }, - { USB_DEVICE(0x0df6, 0x0068) }, - /* Toshiba */ - { USB_DEVICE(0x0930, 0x0a07) }, - /* Zinwell */ - { USB_DEVICE(0x5a57, 0x0284) }, -#endif -#ifdef CONFIG_RT2800USB_RT3573 - /* AirLive */ - { USB_DEVICE(0x1b75, 0x7733) }, - /* ASUS */ - { USB_DEVICE(0x0b05, 0x17bc) }, - { USB_DEVICE(0x0b05, 0x17ad) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x1103) }, - /* Cameo */ - { USB_DEVICE(0x148f, 0xf301) }, - /* D-Link */ - { USB_DEVICE(0x2001, 0x3c1f) }, - /* Edimax */ - { USB_DEVICE(0x7392, 0x7733) }, - /* Hawking */ - { USB_DEVICE(0x0e66, 0x0020) }, - { USB_DEVICE(0x0e66, 0x0021) }, - /* I-O DATA */ - { USB_DEVICE(0x04bb, 0x094e) }, - /* Linksys */ - { USB_DEVICE(0x13b1, 0x003b) }, - /* Logitec */ - { USB_DEVICE(0x0789, 0x016b) }, - /* NETGEAR */ - { USB_DEVICE(0x0846, 0x9012) }, - { USB_DEVICE(0x0846, 0x9013) }, - { USB_DEVICE(0x0846, 0x9019) }, - /* Planex */ - { USB_DEVICE(0x2019, 0xed19) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x3573) }, - /* Sitecom */ - { USB_DEVICE(0x0df6, 0x0067) }, - { USB_DEVICE(0x0df6, 0x006a) }, - { USB_DEVICE(0x0df6, 0x006e) }, - /* ZyXEL */ - { USB_DEVICE(0x0586, 0x3421) }, -#endif -#ifdef CONFIG_RT2800USB_RT53XX - /* Arcadyan */ - { USB_DEVICE(0x043e, 0x7a12) }, - { USB_DEVICE(0x043e, 0x7a32) }, - /* ASUS */ - { USB_DEVICE(0x0b05, 0x17e8) }, - /* Azurewave */ - { USB_DEVICE(0x13d3, 0x3329) }, - { USB_DEVICE(0x13d3, 0x3365) }, - /* D-Link */ - { USB_DEVICE(0x2001, 0x3c15) }, - { USB_DEVICE(0x2001, 0x3c19) }, - { USB_DEVICE(0x2001, 0x3c1c) }, - { USB_DEVICE(0x2001, 0x3c1d) }, - { USB_DEVICE(0x2001, 0x3c1e) }, - { USB_DEVICE(0x2001, 0x3c20) }, - { USB_DEVICE(0x2001, 0x3c22) }, - { USB_DEVICE(0x2001, 0x3c23) }, - /* LG innotek */ - { USB_DEVICE(0x043e, 0x7a22) }, - { USB_DEVICE(0x043e, 0x7a42) }, - /* Panasonic */ - { USB_DEVICE(0x04da, 0x1801) }, - { USB_DEVICE(0x04da, 0x1800) }, - { USB_DEVICE(0x04da, 0x23f6) }, - /* Philips */ - { USB_DEVICE(0x0471, 0x2104) }, - { USB_DEVICE(0x0471, 0x2126) }, - { USB_DEVICE(0x0471, 0x2180) }, - { USB_DEVICE(0x0471, 0x2181) }, - { USB_DEVICE(0x0471, 0x2182) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x5370) }, - { USB_DEVICE(0x148f, 0x5372) }, -#endif -#ifdef CONFIG_RT2800USB_RT55XX - /* Arcadyan */ - { USB_DEVICE(0x043e, 0x7a32) }, - /* AVM GmbH */ - { USB_DEVICE(0x057c, 0x8501) }, - /* Buffalo */ - { USB_DEVICE(0x0411, 0x0241) }, - { USB_DEVICE(0x0411, 0x0253) }, - /* D-Link */ - { USB_DEVICE(0x2001, 0x3c1a) }, - { USB_DEVICE(0x2001, 0x3c21) }, - /* Proware */ - { USB_DEVICE(0x043e, 0x7a13) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x5572) }, - /* TRENDnet */ - { USB_DEVICE(0x20f4, 0x724a) }, -#endif -#ifdef CONFIG_RT2800USB_UNKNOWN - /* - * Unclear what kind of devices these are (they aren't supported by the - * vendor linux driver). - */ - /* Abocom */ - { USB_DEVICE(0x07b8, 0x3073) }, - { USB_DEVICE(0x07b8, 0x3074) }, - /* Alpha Networks */ - { USB_DEVICE(0x14b2, 0x3c08) }, - { USB_DEVICE(0x14b2, 0x3c11) }, - /* Amigo */ - { USB_DEVICE(0x0e0b, 0x9031) }, - { USB_DEVICE(0x0e0b, 0x9041) }, - /* ASUS */ - { USB_DEVICE(0x0b05, 0x166a) }, - { USB_DEVICE(0x0b05, 0x1760) }, - { USB_DEVICE(0x0b05, 0x1761) }, - { USB_DEVICE(0x0b05, 0x1790) }, - { USB_DEVICE(0x0b05, 0x17a7) }, - /* AzureWave */ - { USB_DEVICE(0x13d3, 0x3262) }, - { USB_DEVICE(0x13d3, 0x3284) }, - { USB_DEVICE(0x13d3, 0x3322) }, - { USB_DEVICE(0x13d3, 0x3340) }, - { USB_DEVICE(0x13d3, 0x3399) }, - { USB_DEVICE(0x13d3, 0x3400) }, - { USB_DEVICE(0x13d3, 0x3401) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x1003) }, - /* Buffalo */ - { USB_DEVICE(0x0411, 0x012e) }, - { USB_DEVICE(0x0411, 0x0148) }, - { USB_DEVICE(0x0411, 0x0150) }, - /* Corega */ - { USB_DEVICE(0x07aa, 0x0041) }, - { USB_DEVICE(0x07aa, 0x0042) }, - { USB_DEVICE(0x18c5, 0x0008) }, - /* D-Link */ - { USB_DEVICE(0x07d1, 0x3c0b) }, - /* Encore */ - { USB_DEVICE(0x203d, 0x14a1) }, - /* EnGenius */ - { USB_DEVICE(0x1740, 0x0600) }, - { USB_DEVICE(0x1740, 0x0602) }, - /* Gemtek */ - { USB_DEVICE(0x15a9, 0x0010) }, - /* Gigabyte */ - { USB_DEVICE(0x1044, 0x800c) }, - /* Hercules */ - { USB_DEVICE(0x06f8, 0xe036) }, - /* Huawei */ - { USB_DEVICE(0x148f, 0xf101) }, - /* I-O DATA */ - { USB_DEVICE(0x04bb, 0x094b) }, - /* LevelOne */ - { USB_DEVICE(0x1740, 0x0605) }, - { USB_DEVICE(0x1740, 0x0615) }, - /* Logitec */ - { USB_DEVICE(0x0789, 0x0168) }, - { USB_DEVICE(0x0789, 0x0169) }, - /* Motorola */ - { USB_DEVICE(0x100d, 0x9032) }, - /* Pegatron */ - { USB_DEVICE(0x05a6, 0x0101) }, - { USB_DEVICE(0x1d4d, 0x0010) }, - /* Planex */ - { USB_DEVICE(0x2019, 0xab24) }, - { USB_DEVICE(0x2019, 0xab29) }, - /* Qcom */ - { USB_DEVICE(0x18e8, 0x6259) }, - /* RadioShack */ - { USB_DEVICE(0x08b9, 0x1197) }, - /* Sitecom */ - { USB_DEVICE(0x0df6, 0x003c) }, - { USB_DEVICE(0x0df6, 0x004a) }, - { USB_DEVICE(0x0df6, 0x004d) }, - { USB_DEVICE(0x0df6, 0x0053) }, - { USB_DEVICE(0x0df6, 0x0069) }, - { USB_DEVICE(0x0df6, 0x006f) }, - { USB_DEVICE(0x0df6, 0x0078) }, - /* SMC */ - { USB_DEVICE(0x083a, 0xa512) }, - { USB_DEVICE(0x083a, 0xc522) }, - { USB_DEVICE(0x083a, 0xd522) }, - { USB_DEVICE(0x083a, 0xf511) }, - /* Sweex */ - { USB_DEVICE(0x177f, 0x0254) }, - /* TP-LINK */ - { USB_DEVICE(0xf201, 0x5370) }, -#endif - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards"); -MODULE_DEVICE_TABLE(usb, rt2800usb_device_table); -MODULE_FIRMWARE(FIRMWARE_RT2870); -MODULE_LICENSE("GPL"); - -static int rt2800usb_probe(struct usb_interface *usb_intf, - const struct usb_device_id *id) -{ - return rt2x00usb_probe(usb_intf, &rt2800usb_ops); -} - -static struct usb_driver rt2800usb_driver = { - .name = KBUILD_MODNAME, - .id_table = rt2800usb_device_table, - .probe = rt2800usb_probe, - .disconnect = rt2x00usb_disconnect, - .suspend = rt2x00usb_suspend, - .resume = rt2x00usb_resume, - .reset_resume = rt2x00usb_resume, - .disable_hub_initiated_lpm = 1, -}; - -module_usb_driver(rt2800usb_driver); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h deleted file mode 100644 index ea7cac095997..000000000000 --- a/drivers/net/wireless/rt2x00/rt2800usb.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> - Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> - Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> - Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2800usb - Abstract: Data structures and registers for the rt2800usb module. - Supported chipsets: RT2800U. - */ - -#ifndef RT2800USB_H -#define RT2800USB_H - -/* - * 8051 firmware image. - */ -#define FIRMWARE_RT2870 "rt2870.bin" -#define FIRMWARE_IMAGE_BASE 0x3000 - -/* - * DMA descriptor defines. - */ -#define TXINFO_DESC_SIZE (1 * sizeof(__le32)) -#define RXINFO_DESC_SIZE (1 * sizeof(__le32)) - -/* - * TX Info structure - */ - -/* - * Word0 - * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI - * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. - * 0:MGMT, 1:HCCA 2:EDCA - * USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid - * DMA_TX_BURST: used ONLY in USB bulk Aggregation. - * Force USB DMA transmit frame from current selected endpoint - */ -#define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff) -#define TXINFO_W0_WIV FIELD32(0x01000000) -#define TXINFO_W0_QSEL FIELD32(0x06000000) -#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000) -#define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000) -#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000) - -/* - * RX Info structure - */ - -/* - * Word 0 - */ - -#define RXINFO_W0_USB_DMA_RX_PKT_LEN FIELD32(0x0000ffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - * UNICAST_TO_ME: This RX frame is unicast to me. - * MULTICAST: This is a multicast frame. - * BROADCAST: This is a broadcast frame. - * MY_BSS: this frame belongs to the same BSSID. - * CRC_ERROR: CRC error. - * CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid. - * AMSDU: rx with 802.3 header, not 802.11 header. - */ - -#define RXD_W0_BA FIELD32(0x00000001) -#define RXD_W0_DATA FIELD32(0x00000002) -#define RXD_W0_NULLDATA FIELD32(0x00000004) -#define RXD_W0_FRAG FIELD32(0x00000008) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010) -#define RXD_W0_MULTICAST FIELD32(0x00000020) -#define RXD_W0_BROADCAST FIELD32(0x00000040) -#define RXD_W0_MY_BSS FIELD32(0x00000080) -#define RXD_W0_CRC_ERROR FIELD32(0x00000100) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000600) -#define RXD_W0_AMSDU FIELD32(0x00000800) -#define RXD_W0_HTC FIELD32(0x00001000) -#define RXD_W0_RSSI FIELD32(0x00002000) -#define RXD_W0_L2PAD FIELD32(0x00004000) -#define RXD_W0_AMPDU FIELD32(0x00008000) -#define RXD_W0_DECRYPTED FIELD32(0x00010000) -#define RXD_W0_PLCP_RSSI FIELD32(0x00020000) -#define RXD_W0_CIPHER_ALG FIELD32(0x00040000) -#define RXD_W0_LAST_AMSDU FIELD32(0x00080000) -#define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000) - -#endif /* RT2800USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h deleted file mode 100644 index 3282ddb766f4..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ /dev/null @@ -1,1478 +0,0 @@ -/* - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00 - Abstract: rt2x00 global information. - */ - -#ifndef RT2X00_H -#define RT2X00_H - -#include <linux/bitops.h> -#include <linux/interrupt.h> -#include <linux/skbuff.h> -#include <linux/workqueue.h> -#include <linux/firmware.h> -#include <linux/leds.h> -#include <linux/mutex.h> -#include <linux/etherdevice.h> -#include <linux/input-polldev.h> -#include <linux/kfifo.h> -#include <linux/hrtimer.h> -#include <linux/average.h> - -#include <net/mac80211.h> - -#include "rt2x00debug.h" -#include "rt2x00dump.h" -#include "rt2x00leds.h" -#include "rt2x00reg.h" -#include "rt2x00queue.h" - -/* - * Module information. - */ -#define DRV_VERSION "2.3.0" -#define DRV_PROJECT "http://rt2x00.serialmonkey.com" - -/* Debug definitions. - * Debug output has to be enabled during compile time. - */ -#ifdef CONFIG_RT2X00_DEBUG -#define DEBUG -#endif /* CONFIG_RT2X00_DEBUG */ - -/* Utility printing macros - * rt2x00_probe_err is for messages when rt2x00_dev is uninitialized - */ -#define rt2x00_probe_err(fmt, ...) \ - printk(KERN_ERR KBUILD_MODNAME ": %s: Error - " fmt, \ - __func__, ##__VA_ARGS__) -#define rt2x00_err(dev, fmt, ...) \ - wiphy_err((dev)->hw->wiphy, "%s: Error - " fmt, \ - __func__, ##__VA_ARGS__) -#define rt2x00_warn(dev, fmt, ...) \ - wiphy_warn((dev)->hw->wiphy, "%s: Warning - " fmt, \ - __func__, ##__VA_ARGS__) -#define rt2x00_info(dev, fmt, ...) \ - wiphy_info((dev)->hw->wiphy, "%s: Info - " fmt, \ - __func__, ##__VA_ARGS__) - -/* Various debug levels */ -#define rt2x00_dbg(dev, fmt, ...) \ - wiphy_dbg((dev)->hw->wiphy, "%s: Debug - " fmt, \ - __func__, ##__VA_ARGS__) -#define rt2x00_eeprom_dbg(dev, fmt, ...) \ - wiphy_dbg((dev)->hw->wiphy, "%s: EEPROM recovery - " fmt, \ - __func__, ##__VA_ARGS__) - -/* - * Duration calculations - * The rate variable passed is: 100kbs. - * To convert from bytes to bits we multiply size with 8, - * then the size is multiplied with 10 to make the - * real rate -> rate argument correction. - */ -#define GET_DURATION(__size, __rate) (((__size) * 8 * 10) / (__rate)) -#define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate)) - -/* - * Determine the number of L2 padding bytes required between the header and - * the payload. - */ -#define L2PAD_SIZE(__hdrlen) (-(__hdrlen) & 3) - -/* - * Determine the alignment requirement, - * to make sure the 802.11 payload is padded to a 4-byte boundrary - * we must determine the address of the payload and calculate the - * amount of bytes needed to move the data. - */ -#define ALIGN_SIZE(__skb, __header) \ - ( ((unsigned long)((__skb)->data + (__header))) & 3 ) - -/* - * Constants for extra TX headroom for alignment purposes. - */ -#define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */ -#define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */ - -/* - * Standard timing and size defines. - * These values should follow the ieee80211 specifications. - */ -#define ACK_SIZE 14 -#define IEEE80211_HEADER 24 -#define PLCP 48 -#define BEACON 100 -#define PREAMBLE 144 -#define SHORT_PREAMBLE 72 -#define SLOT_TIME 20 -#define SHORT_SLOT_TIME 9 -#define SIFS 10 -#define PIFS ( SIFS + SLOT_TIME ) -#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME ) -#define DIFS ( PIFS + SLOT_TIME ) -#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) -#define EIFS ( SIFS + DIFS + \ - GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) ) -#define SHORT_EIFS ( SIFS + SHORT_DIFS + \ - GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) ) - -enum rt2x00_chip_intf { - RT2X00_CHIP_INTF_PCI, - RT2X00_CHIP_INTF_PCIE, - RT2X00_CHIP_INTF_USB, - RT2X00_CHIP_INTF_SOC, -}; - -/* - * Chipset identification - * The chipset on the device is composed of a RT and RF chip. - * The chipset combination is important for determining device capabilities. - */ -struct rt2x00_chip { - u16 rt; -#define RT2460 0x2460 -#define RT2560 0x2560 -#define RT2570 0x2570 -#define RT2661 0x2661 -#define RT2573 0x2573 -#define RT2860 0x2860 /* 2.4GHz */ -#define RT2872 0x2872 /* WSOC */ -#define RT2883 0x2883 /* WSOC */ -#define RT3070 0x3070 -#define RT3071 0x3071 -#define RT3090 0x3090 /* 2.4GHz PCIe */ -#define RT3290 0x3290 -#define RT3352 0x3352 /* WSOC */ -#define RT3390 0x3390 -#define RT3572 0x3572 -#define RT3593 0x3593 -#define RT3883 0x3883 /* WSOC */ -#define RT5390 0x5390 /* 2.4GHz */ -#define RT5392 0x5392 /* 2.4GHz */ -#define RT5592 0x5592 - - u16 rf; - u16 rev; - - enum rt2x00_chip_intf intf; -}; - -/* - * RF register values that belong to a particular channel. - */ -struct rf_channel { - int channel; - u32 rf1; - u32 rf2; - u32 rf3; - u32 rf4; -}; - -/* - * Channel information structure - */ -struct channel_info { - unsigned int flags; -#define GEOGRAPHY_ALLOWED 0x00000001 - - short max_power; - short default_power1; - short default_power2; - short default_power3; -}; - -/* - * Antenna setup values. - */ -struct antenna_setup { - enum antenna rx; - enum antenna tx; - u8 rx_chain_num; - u8 tx_chain_num; -}; - -/* - * Quality statistics about the currently active link. - */ -struct link_qual { - /* - * Statistics required for Link tuning by driver - * The rssi value is provided by rt2x00lib during the - * link_tuner() callback function. - * The false_cca field is filled during the link_stats() - * callback function and could be used during the - * link_tuner() callback function. - */ - int rssi; - int false_cca; - - /* - * VGC levels - * Hardware driver will tune the VGC level during each call - * to the link_tuner() callback function. This vgc_level is - * is determined based on the link quality statistics like - * average RSSI and the false CCA count. - * - * In some cases the drivers need to differentiate between - * the currently "desired" VGC level and the level configured - * in the hardware. The latter is important to reduce the - * number of BBP register reads to reduce register access - * overhead. For this reason we store both values here. - */ - u8 vgc_level; - u8 vgc_level_reg; - - /* - * Statistics required for Signal quality calculation. - * These fields might be changed during the link_stats() - * callback function. - */ - int rx_success; - int rx_failed; - int tx_success; - int tx_failed; -}; - -DECLARE_EWMA(rssi, 1024, 8) - -/* - * Antenna settings about the currently active link. - */ -struct link_ant { - /* - * Antenna flags - */ - unsigned int flags; -#define ANTENNA_RX_DIVERSITY 0x00000001 -#define ANTENNA_TX_DIVERSITY 0x00000002 -#define ANTENNA_MODE_SAMPLE 0x00000004 - - /* - * Currently active TX/RX antenna setup. - * When software diversity is used, this will indicate - * which antenna is actually used at this time. - */ - struct antenna_setup active; - - /* - * RSSI history information for the antenna. - * Used to determine when to switch antenna - * when using software diversity. - */ - int rssi_history; - - /* - * Current RSSI average of the currently active antenna. - * Similar to the avg_rssi in the link_qual structure - * this value is updated by using the walking average. - */ - struct ewma_rssi rssi_ant; -}; - -/* - * To optimize the quality of the link we need to store - * the quality of received frames and periodically - * optimize the link. - */ -struct link { - /* - * Link tuner counter - * The number of times the link has been tuned - * since the radio has been switched on. - */ - u32 count; - - /* - * Quality measurement values. - */ - struct link_qual qual; - - /* - * TX/RX antenna setup. - */ - struct link_ant ant; - - /* - * Currently active average RSSI value - */ - struct ewma_rssi avg_rssi; - - /* - * Work structure for scheduling periodic link tuning. - */ - struct delayed_work work; - - /* - * Work structure for scheduling periodic watchdog monitoring. - * This work must be scheduled on the kernel workqueue, while - * all other work structures must be queued on the mac80211 - * workqueue. This guarantees that the watchdog can schedule - * other work structures and wait for their completion in order - * to bring the device/driver back into the desired state. - */ - struct delayed_work watchdog_work; - - /* - * Work structure for scheduling periodic AGC adjustments. - */ - struct delayed_work agc_work; - - /* - * Work structure for scheduling periodic VCO calibration. - */ - struct delayed_work vco_work; -}; - -enum rt2x00_delayed_flags { - DELAYED_UPDATE_BEACON, -}; - -/* - * Interface structure - * Per interface configuration details, this structure - * is allocated as the private data for ieee80211_vif. - */ -struct rt2x00_intf { - /* - * beacon->skb must be protected with the mutex. - */ - struct mutex beacon_skb_mutex; - - /* - * Entry in the beacon queue which belongs to - * this interface. Each interface has its own - * dedicated beacon entry. - */ - struct queue_entry *beacon; - bool enable_beacon; - - /* - * Actions that needed rescheduling. - */ - unsigned long delayed_flags; - - /* - * Software sequence counter, this is only required - * for hardware which doesn't support hardware - * sequence counting. - */ - atomic_t seqno; -}; - -static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) -{ - return (struct rt2x00_intf *)vif->drv_priv; -} - -/** - * struct hw_mode_spec: Hardware specifications structure - * - * Details about the supported modes, rates and channels - * of a particular chipset. This is used by rt2x00lib - * to build the ieee80211_hw_mode array for mac80211. - * - * @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz). - * @supported_rates: Rate types which are supported (CCK, OFDM). - * @num_channels: Number of supported channels. This is used as array size - * for @tx_power_a, @tx_power_bg and @channels. - * @channels: Device/chipset specific channel values (See &struct rf_channel). - * @channels_info: Additional information for channels (See &struct channel_info). - * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap). - */ -struct hw_mode_spec { - unsigned int supported_bands; -#define SUPPORT_BAND_2GHZ 0x00000001 -#define SUPPORT_BAND_5GHZ 0x00000002 - - unsigned int supported_rates; -#define SUPPORT_RATE_CCK 0x00000001 -#define SUPPORT_RATE_OFDM 0x00000002 - - unsigned int num_channels; - const struct rf_channel *channels; - const struct channel_info *channels_info; - - struct ieee80211_sta_ht_cap ht; -}; - -/* - * Configuration structure wrapper around the - * mac80211 configuration structure. - * When mac80211 configures the driver, rt2x00lib - * can precalculate values which are equal for all - * rt2x00 drivers. Those values can be stored in here. - */ -struct rt2x00lib_conf { - struct ieee80211_conf *conf; - - struct rf_channel rf; - struct channel_info channel; -}; - -/* - * Configuration structure for erp settings. - */ -struct rt2x00lib_erp { - int short_preamble; - int cts_protection; - - u32 basic_rates; - - int slot_time; - - short sifs; - short pifs; - short difs; - short eifs; - - u16 beacon_int; - u16 ht_opmode; -}; - -/* - * Configuration structure for hardware encryption. - */ -struct rt2x00lib_crypto { - enum cipher cipher; - - enum set_key_cmd cmd; - const u8 *address; - - u32 bssidx; - - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; - - int wcid; -}; - -/* - * Configuration structure wrapper around the - * rt2x00 interface configuration handler. - */ -struct rt2x00intf_conf { - /* - * Interface type - */ - enum nl80211_iftype type; - - /* - * TSF sync value, this is dependent on the operation type. - */ - enum tsf_sync sync; - - /* - * The MAC and BSSID addresses are simple array of bytes, - * these arrays are little endian, so when sending the addresses - * to the drivers, copy the it into a endian-signed variable. - * - * Note that all devices (except rt2500usb) have 32 bits - * register word sizes. This means that whatever variable we - * pass _must_ be a multiple of 32 bits. Otherwise the device - * might not accept what we are sending to it. - * This will also make it easier for the driver to write - * the data to the device. - */ - __le32 mac[2]; - __le32 bssid[2]; -}; - -/* - * Private structure for storing STA details - * wcid: Wireless Client ID - */ -struct rt2x00_sta { - int wcid; -}; - -static inline struct rt2x00_sta* sta_to_rt2x00_sta(struct ieee80211_sta *sta) -{ - return (struct rt2x00_sta *)sta->drv_priv; -} - -/* - * rt2x00lib callback functions. - */ -struct rt2x00lib_ops { - /* - * Interrupt handlers. - */ - irq_handler_t irq_handler; - - /* - * TX status tasklet handler. - */ - void (*txstatus_tasklet) (unsigned long data); - void (*pretbtt_tasklet) (unsigned long data); - void (*tbtt_tasklet) (unsigned long data); - void (*rxdone_tasklet) (unsigned long data); - void (*autowake_tasklet) (unsigned long data); - - /* - * Device init handlers. - */ - int (*probe_hw) (struct rt2x00_dev *rt2x00dev); - char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev); - int (*check_firmware) (struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len); - int (*load_firmware) (struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len); - - /* - * Device initialization/deinitialization handlers. - */ - int (*initialize) (struct rt2x00_dev *rt2x00dev); - void (*uninitialize) (struct rt2x00_dev *rt2x00dev); - - /* - * queue initialization handlers - */ - bool (*get_entry_state) (struct queue_entry *entry); - void (*clear_entry) (struct queue_entry *entry); - - /* - * Radio control handlers. - */ - int (*set_device_state) (struct rt2x00_dev *rt2x00dev, - enum dev_state state); - int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev); - void (*link_stats) (struct rt2x00_dev *rt2x00dev, - struct link_qual *qual); - void (*reset_tuner) (struct rt2x00_dev *rt2x00dev, - struct link_qual *qual); - void (*link_tuner) (struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count); - void (*gain_calibration) (struct rt2x00_dev *rt2x00dev); - void (*vco_calibration) (struct rt2x00_dev *rt2x00dev); - - /* - * Data queue handlers. - */ - void (*watchdog) (struct rt2x00_dev *rt2x00dev); - void (*start_queue) (struct data_queue *queue); - void (*kick_queue) (struct data_queue *queue); - void (*stop_queue) (struct data_queue *queue); - void (*flush_queue) (struct data_queue *queue, bool drop); - void (*tx_dma_done) (struct queue_entry *entry); - - /* - * TX control handlers - */ - void (*write_tx_desc) (struct queue_entry *entry, - struct txentry_desc *txdesc); - void (*write_tx_data) (struct queue_entry *entry, - struct txentry_desc *txdesc); - void (*write_beacon) (struct queue_entry *entry, - struct txentry_desc *txdesc); - void (*clear_beacon) (struct queue_entry *entry); - int (*get_tx_data_len) (struct queue_entry *entry); - - /* - * RX control handlers - */ - void (*fill_rxdone) (struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc); - - /* - * Configuration handlers. - */ - int (*config_shared_key) (struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key); - int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key); - void (*config_filter) (struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags); - void (*config_intf) (struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags); -#define CONFIG_UPDATE_TYPE ( 1 << 1 ) -#define CONFIG_UPDATE_MAC ( 1 << 2 ) -#define CONFIG_UPDATE_BSSID ( 1 << 3 ) - - void (*config_erp) (struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp, - u32 changed); - void (*config_ant) (struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant); - void (*config) (struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int changed_flags); - int (*sta_add) (struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta); - int (*sta_remove) (struct rt2x00_dev *rt2x00dev, - int wcid); -}; - -/* - * rt2x00 driver callback operation structure. - */ -struct rt2x00_ops { - const char *name; - const unsigned int drv_data_size; - const unsigned int max_ap_intf; - const unsigned int eeprom_size; - const unsigned int rf_size; - const unsigned int tx_queues; - void (*queue_init)(struct data_queue *queue); - const struct rt2x00lib_ops *lib; - const void *drv; - const struct ieee80211_ops *hw; -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - const struct rt2x00debug *debugfs; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * rt2x00 state flags - */ -enum rt2x00_state_flags { - /* - * Device flags - */ - DEVICE_STATE_PRESENT, - DEVICE_STATE_REGISTERED_HW, - DEVICE_STATE_INITIALIZED, - DEVICE_STATE_STARTED, - DEVICE_STATE_ENABLED_RADIO, - DEVICE_STATE_SCANNING, - - /* - * Driver configuration - */ - CONFIG_CHANNEL_HT40, - CONFIG_POWERSAVING, - CONFIG_HT_DISABLED, - CONFIG_QOS_DISABLED, - - /* - * Mark we currently are sequentially reading TX_STA_FIFO register - * FIXME: this is for only rt2800usb, should go to private data - */ - TX_STATUS_READING, -}; - -/* - * rt2x00 capability flags - */ -enum rt2x00_capability_flags { - /* - * Requirements - */ - REQUIRE_FIRMWARE, - REQUIRE_BEACON_GUARD, - REQUIRE_ATIM_QUEUE, - REQUIRE_DMA, - REQUIRE_COPY_IV, - REQUIRE_L2PAD, - REQUIRE_TXSTATUS_FIFO, - REQUIRE_TASKLET_CONTEXT, - REQUIRE_SW_SEQNO, - REQUIRE_HT_TX_DESC, - REQUIRE_PS_AUTOWAKE, - REQUIRE_DELAYED_RFKILL, - - /* - * Capabilities - */ - CAPABILITY_HW_BUTTON, - CAPABILITY_HW_CRYPTO, - CAPABILITY_POWER_LIMIT, - CAPABILITY_CONTROL_FILTERS, - CAPABILITY_CONTROL_FILTER_PSPOLL, - CAPABILITY_PRE_TBTT_INTERRUPT, - CAPABILITY_LINK_TUNING, - CAPABILITY_FRAME_TYPE, - CAPABILITY_RF_SEQUENCE, - CAPABILITY_EXTERNAL_LNA_A, - CAPABILITY_EXTERNAL_LNA_BG, - CAPABILITY_DOUBLE_ANTENNA, - CAPABILITY_BT_COEXIST, - CAPABILITY_VCO_RECALIBRATION, -}; - -/* - * Interface combinations - */ -enum { - IF_COMB_AP = 0, - NUM_IF_COMB, -}; - -/* - * rt2x00 device structure. - */ -struct rt2x00_dev { - /* - * Device structure. - * The structure stored in here depends on the - * system bus (PCI or USB). - * When accessing this variable, the rt2x00dev_{pci,usb} - * macros should be used for correct typecasting. - */ - struct device *dev; - - /* - * Callback functions. - */ - const struct rt2x00_ops *ops; - - /* - * Driver data. - */ - void *drv_data; - - /* - * IEEE80211 control structure. - */ - struct ieee80211_hw *hw; - struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; - enum ieee80211_band curr_band; - int curr_freq; - - /* - * If enabled, the debugfs interface structures - * required for deregistration of debugfs. - */ -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - struct rt2x00debug_intf *debugfs_intf; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - - /* - * LED structure for changing the LED status - * by mac8011 or the kernel. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - struct rt2x00_led led_radio; - struct rt2x00_led led_assoc; - struct rt2x00_led led_qual; - u16 led_mcu_reg; -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - /* - * Device state flags. - * In these flags the current status is stored. - * Access to these flags should occur atomically. - */ - unsigned long flags; - - /* - * Device capabiltiy flags. - * In these flags the device/driver capabilities are stored. - * Access to these flags should occur non-atomically. - */ - unsigned long cap_flags; - - /* - * Device information, Bus IRQ and name (PCI, SoC) - */ - int irq; - const char *name; - - /* - * Chipset identification. - */ - struct rt2x00_chip chip; - - /* - * hw capability specifications. - */ - struct hw_mode_spec spec; - - /* - * This is the default TX/RX antenna setup as indicated - * by the device's EEPROM. - */ - struct antenna_setup default_ant; - - /* - * Register pointers - * csr.base: CSR base register address. (PCI) - * csr.cache: CSR cache for usb_control_msg. (USB) - */ - union csr { - void __iomem *base; - void *cache; - } csr; - - /* - * Mutex to protect register accesses. - * For PCI and USB devices it protects against concurrent indirect - * register access (BBP, RF, MCU) since accessing those - * registers require multiple calls to the CSR registers. - * For USB devices it also protects the csr_cache since that - * field is used for normal CSR access and it cannot support - * multiple callers simultaneously. - */ - struct mutex csr_mutex; - - /* - * Current packet filter configuration for the device. - * This contains all currently active FIF_* flags send - * to us by mac80211 during configure_filter(). - */ - unsigned int packet_filter; - - /* - * Interface details: - * - Open ap interface count. - * - Open sta interface count. - * - Association count. - * - Beaconing enabled count. - */ - unsigned int intf_ap_count; - unsigned int intf_sta_count; - unsigned int intf_associated; - unsigned int intf_beaconing; - - /* - * Interface combinations - */ - struct ieee80211_iface_limit if_limits_ap; - struct ieee80211_iface_combination if_combinations[NUM_IF_COMB]; - - /* - * Link quality - */ - struct link link; - - /* - * EEPROM data. - */ - __le16 *eeprom; - - /* - * Active RF register values. - * These are stored here so we don't need - * to read the rf registers and can directly - * use this value instead. - * This field should be accessed by using - * rt2x00_rf_read() and rt2x00_rf_write(). - */ - u32 *rf; - - /* - * LNA gain - */ - short lna_gain; - - /* - * Current TX power value. - */ - u16 tx_power; - - /* - * Current retry values. - */ - u8 short_retry; - u8 long_retry; - - /* - * Rssi <-> Dbm offset - */ - u8 rssi_offset; - - /* - * Frequency offset. - */ - u8 freq_offset; - - /* - * Association id. - */ - u16 aid; - - /* - * Beacon interval. - */ - u16 beacon_int; - - /** - * Timestamp of last received beacon - */ - unsigned long last_beacon; - - /* - * Low level statistics which will have - * to be kept up to date while device is running. - */ - struct ieee80211_low_level_stats low_level_stats; - - /** - * Work queue for all work which should not be placed - * on the mac80211 workqueue (because of dependencies - * between various work structures). - */ - struct workqueue_struct *workqueue; - - /* - * Scheduled work. - * NOTE: intf_work will use ieee80211_iterate_active_interfaces() - * which means it cannot be placed on the hw->workqueue - * due to RTNL locking requirements. - */ - struct work_struct intf_work; - - /** - * Scheduled work for TX/RX done handling (USB devices) - */ - struct work_struct rxdone_work; - struct work_struct txdone_work; - - /* - * Powersaving work - */ - struct delayed_work autowakeup_work; - struct work_struct sleep_work; - - /* - * Data queue arrays for RX, TX, Beacon and ATIM. - */ - unsigned int data_queues; - struct data_queue *rx; - struct data_queue *tx; - struct data_queue *bcn; - struct data_queue *atim; - - /* - * Firmware image. - */ - const struct firmware *fw; - - /* - * FIFO for storing tx status reports between isr and tasklet. - */ - DECLARE_KFIFO_PTR(txstatus_fifo, u32); - - /* - * Timer to ensure tx status reports are read (rt2800usb). - */ - struct hrtimer txstatus_timer; - - /* - * Tasklet for processing tx status reports (rt2800pci). - */ - struct tasklet_struct txstatus_tasklet; - struct tasklet_struct pretbtt_tasklet; - struct tasklet_struct tbtt_tasklet; - struct tasklet_struct rxdone_tasklet; - struct tasklet_struct autowake_tasklet; - - /* - * Used for VCO periodic calibration. - */ - int rf_channel; - - /* - * Protect the interrupt mask register. - */ - spinlock_t irqmask_lock; - - /* - * List of BlockAckReq TX entries that need driver BlockAck processing. - */ - struct list_head bar_list; - spinlock_t bar_list_lock; - - /* Extra TX headroom required for alignment purposes. */ - unsigned int extra_tx_headroom; -}; - -struct rt2x00_bar_list_entry { - struct list_head list; - struct rcu_head head; - - struct queue_entry *entry; - int block_acked; - - /* Relevant parts of the IEEE80211 BAR header */ - __u8 ra[6]; - __u8 ta[6]; - __le16 control; - __le16 start_seq_num; -}; - -/* - * Register defines. - * Some registers require multiple attempts before success, - * in those cases REGISTER_BUSY_COUNT attempts should be - * taken with a REGISTER_BUSY_DELAY interval. Due to USB - * bus delays, we do not have to loop so many times to wait - * for valid register value on that bus. - */ -#define REGISTER_BUSY_COUNT 100 -#define REGISTER_USB_BUSY_COUNT 20 -#define REGISTER_BUSY_DELAY 100 - -/* - * Generic RF access. - * The RF is being accessed by word index. - */ -static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32)); - *data = rt2x00dev->rf[word - 1]; -} - -static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32)); - rt2x00dev->rf[word - 1] = data; -} - -/* - * Generic EEPROM access. The EEPROM is being accessed by word or byte index. - */ -static inline void *rt2x00_eeprom_addr(struct rt2x00_dev *rt2x00dev, - const unsigned int word) -{ - return (void *)&rt2x00dev->eeprom[word]; -} - -static inline void rt2x00_eeprom_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u16 *data) -{ - *data = le16_to_cpu(rt2x00dev->eeprom[word]); -} - -static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u16 data) -{ - rt2x00dev->eeprom[word] = cpu_to_le16(data); -} - -static inline u8 rt2x00_eeprom_byte(struct rt2x00_dev *rt2x00dev, - const unsigned int byte) -{ - return *(((u8 *)rt2x00dev->eeprom) + byte); -} - -/* - * Chipset handlers - */ -static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev, - const u16 rt, const u16 rf, const u16 rev) -{ - rt2x00dev->chip.rt = rt; - rt2x00dev->chip.rf = rf; - rt2x00dev->chip.rev = rev; - - rt2x00_info(rt2x00dev, "Chipset detected - rt: %04x, rf: %04x, rev: %04x\n", - rt2x00dev->chip.rt, rt2x00dev->chip.rf, - rt2x00dev->chip.rev); -} - -static inline void rt2x00_set_rt(struct rt2x00_dev *rt2x00dev, - const u16 rt, const u16 rev) -{ - rt2x00dev->chip.rt = rt; - rt2x00dev->chip.rev = rev; - - rt2x00_info(rt2x00dev, "RT chipset %04x, rev %04x detected\n", - rt2x00dev->chip.rt, rt2x00dev->chip.rev); -} - -static inline void rt2x00_set_rf(struct rt2x00_dev *rt2x00dev, const u16 rf) -{ - rt2x00dev->chip.rf = rf; - - rt2x00_info(rt2x00dev, "RF chipset %04x detected\n", - rt2x00dev->chip.rf); -} - -static inline bool rt2x00_rt(struct rt2x00_dev *rt2x00dev, const u16 rt) -{ - return (rt2x00dev->chip.rt == rt); -} - -static inline bool rt2x00_rf(struct rt2x00_dev *rt2x00dev, const u16 rf) -{ - return (rt2x00dev->chip.rf == rf); -} - -static inline u16 rt2x00_rev(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00dev->chip.rev; -} - -static inline bool rt2x00_rt_rev(struct rt2x00_dev *rt2x00dev, - const u16 rt, const u16 rev) -{ - return (rt2x00_rt(rt2x00dev, rt) && rt2x00_rev(rt2x00dev) == rev); -} - -static inline bool rt2x00_rt_rev_lt(struct rt2x00_dev *rt2x00dev, - const u16 rt, const u16 rev) -{ - return (rt2x00_rt(rt2x00dev, rt) && rt2x00_rev(rt2x00dev) < rev); -} - -static inline bool rt2x00_rt_rev_gte(struct rt2x00_dev *rt2x00dev, - const u16 rt, const u16 rev) -{ - return (rt2x00_rt(rt2x00dev, rt) && rt2x00_rev(rt2x00dev) >= rev); -} - -static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev, - enum rt2x00_chip_intf intf) -{ - rt2x00dev->chip.intf = intf; -} - -static inline bool rt2x00_intf(struct rt2x00_dev *rt2x00dev, - enum rt2x00_chip_intf intf) -{ - return (rt2x00dev->chip.intf == intf); -} - -static inline bool rt2x00_is_pci(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI) || - rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE); -} - -static inline bool rt2x00_is_pcie(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE); -} - -static inline bool rt2x00_is_usb(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); -} - -static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC); -} - -/* Helpers for capability flags */ - -static inline bool -rt2x00_has_cap_flag(struct rt2x00_dev *rt2x00dev, - enum rt2x00_capability_flags cap_flag) -{ - return test_bit(cap_flag, &rt2x00dev->cap_flags); -} - -static inline bool -rt2x00_has_cap_hw_crypto(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_HW_CRYPTO); -} - -static inline bool -rt2x00_has_cap_power_limit(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_POWER_LIMIT); -} - -static inline bool -rt2x00_has_cap_control_filters(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_CONTROL_FILTERS); -} - -static inline bool -rt2x00_has_cap_control_filter_pspoll(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_CONTROL_FILTER_PSPOLL); -} - -static inline bool -rt2x00_has_cap_pre_tbtt_interrupt(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_PRE_TBTT_INTERRUPT); -} - -static inline bool -rt2x00_has_cap_link_tuning(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_LINK_TUNING); -} - -static inline bool -rt2x00_has_cap_frame_type(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_FRAME_TYPE); -} - -static inline bool -rt2x00_has_cap_rf_sequence(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_RF_SEQUENCE); -} - -static inline bool -rt2x00_has_cap_external_lna_a(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_EXTERNAL_LNA_A); -} - -static inline bool -rt2x00_has_cap_external_lna_bg(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_EXTERNAL_LNA_BG); -} - -static inline bool -rt2x00_has_cap_double_antenna(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_DOUBLE_ANTENNA); -} - -static inline bool -rt2x00_has_cap_bt_coexist(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_BT_COEXIST); -} - -static inline bool -rt2x00_has_cap_vco_recalibration(struct rt2x00_dev *rt2x00dev) -{ - return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_VCO_RECALIBRATION); -} - -/** - * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. - * @entry: Pointer to &struct queue_entry - * - * Returns -ENOMEM if mapping fail, 0 otherwise. - */ -int rt2x00queue_map_txskb(struct queue_entry *entry); - -/** - * rt2x00queue_unmap_skb - Unmap a skb from DMA. - * @entry: Pointer to &struct queue_entry - */ -void rt2x00queue_unmap_skb(struct queue_entry *entry); - -/** - * rt2x00queue_get_tx_queue - Convert tx queue index to queue pointer - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @queue: rt2x00 queue index (see &enum data_queue_qid). - * - * Returns NULL for non tx queues. - */ -static inline struct data_queue * -rt2x00queue_get_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue) -{ - if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx) - return &rt2x00dev->tx[queue]; - - if (queue == QID_ATIM) - return rt2x00dev->atim; - - return NULL; -} - -/** - * rt2x00queue_get_entry - Get queue entry where the given index points to. - * @queue: Pointer to &struct data_queue from where we obtain the entry. - * @index: Index identifier for obtaining the correct index. - */ -struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, - enum queue_index index); - -/** - * rt2x00queue_pause_queue - Pause a data queue - * @queue: Pointer to &struct data_queue. - * - * This function will pause the data queue locally, preventing - * new frames to be added to the queue (while the hardware is - * still allowed to run). - */ -void rt2x00queue_pause_queue(struct data_queue *queue); - -/** - * rt2x00queue_unpause_queue - unpause a data queue - * @queue: Pointer to &struct data_queue. - * - * This function will unpause the data queue locally, allowing - * new frames to be added to the queue again. - */ -void rt2x00queue_unpause_queue(struct data_queue *queue); - -/** - * rt2x00queue_start_queue - Start a data queue - * @queue: Pointer to &struct data_queue. - * - * This function will start handling all pending frames in the queue. - */ -void rt2x00queue_start_queue(struct data_queue *queue); - -/** - * rt2x00queue_stop_queue - Halt a data queue - * @queue: Pointer to &struct data_queue. - * - * This function will stop all pending frames in the queue. - */ -void rt2x00queue_stop_queue(struct data_queue *queue); - -/** - * rt2x00queue_flush_queue - Flush a data queue - * @queue: Pointer to &struct data_queue. - * @drop: True to drop all pending frames. - * - * This function will flush the queue. After this call - * the queue is guaranteed to be empty. - */ -void rt2x00queue_flush_queue(struct data_queue *queue, bool drop); - -/** - * rt2x00queue_start_queues - Start all data queues - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * This function will loop through all available queues to start them - */ -void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00queue_stop_queues - Halt all data queues - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * This function will loop through all available queues to stop - * any pending frames. - */ -void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00queue_flush_queues - Flush all data queues - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @drop: True to drop all pending frames. - * - * This function will loop through all available queues to flush - * any pending frames. - */ -void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop); - -/* - * Debugfs handlers. - */ -/** - * rt2x00debug_dump_frame - Dump a frame to userspace through debugfs. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @type: The type of frame that is being dumped. - * @skb: The skb containing the frame to be dumped. - */ -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, - enum rt2x00_dump_type type, struct sk_buff *skb); -#else -static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, - enum rt2x00_dump_type type, - struct sk_buff *skb) -{ -} -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -/* - * Utility functions. - */ -u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif); - -/* - * Interrupt context handlers. - */ -void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_dmastart(struct queue_entry *entry); -void rt2x00lib_dmadone(struct queue_entry *entry); -void rt2x00lib_txdone(struct queue_entry *entry, - struct txdone_entry_desc *txdesc); -void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status); -void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp); - -/* - * mac80211 handlers. - */ -void rt2x00mac_tx(struct ieee80211_hw *hw, - struct ieee80211_tx_control *control, - struct sk_buff *skb); -int rt2x00mac_start(struct ieee80211_hw *hw); -void rt2x00mac_stop(struct ieee80211_hw *hw); -int rt2x00mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -void rt2x00mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed); -void rt2x00mac_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast); -int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, - bool set); -#ifdef CONFIG_RT2X00_LIB_CRYPTO -int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key); -#else -#define rt2x00mac_set_key NULL -#endif /* CONFIG_RT2X00_LIB_CRYPTO */ -int rt2x00mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_sta *sta); -int rt2x00mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_sta *sta); -void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - const u8 *mac_addr); -void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -int rt2x00mac_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats); -void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue, - const struct ieee80211_tx_queue_params *params); -void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw); -void rt2x00mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - u32 queues, bool drop); -int rt2x00mac_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant); -int rt2x00mac_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); -void rt2x00mac_get_ringparam(struct ieee80211_hw *hw, - u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); -bool rt2x00mac_tx_frames_pending(struct ieee80211_hw *hw); - -/* - * Driver allocation handlers. - */ -int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev); -#ifdef CONFIG_PM -int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state); -int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev); -#endif /* CONFIG_PM */ - -#endif /* RT2X00_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c deleted file mode 100644 index 7e8bb1198ae9..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 generic configuration routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - enum nl80211_iftype type, - const u8 *mac, const u8 *bssid) -{ - struct rt2x00intf_conf conf; - unsigned int flags = 0; - - conf.type = type; - - switch (type) { - case NL80211_IFTYPE_ADHOC: - conf.sync = TSF_SYNC_ADHOC; - break; - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_MESH_POINT: - case NL80211_IFTYPE_WDS: - conf.sync = TSF_SYNC_AP_NONE; - break; - case NL80211_IFTYPE_STATION: - conf.sync = TSF_SYNC_INFRA; - break; - default: - conf.sync = TSF_SYNC_NONE; - break; - } - - /* - * Note that when NULL is passed as address we will send - * 00:00:00:00:00 to the device to clear the address. - * This will prevent the device being confused when it wants - * to ACK frames or considers itself associated. - */ - memset(conf.mac, 0, sizeof(conf.mac)); - if (mac) - memcpy(conf.mac, mac, ETH_ALEN); - - memset(conf.bssid, 0, sizeof(conf.bssid)); - if (bssid) - memcpy(conf.bssid, bssid, ETH_ALEN); - - flags |= CONFIG_UPDATE_TYPE; - if (mac || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)) - flags |= CONFIG_UPDATE_MAC; - if (bssid || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)) - flags |= CONFIG_UPDATE_BSSID; - - rt2x00dev->ops->lib->config_intf(rt2x00dev, intf, &conf, flags); -} - -void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct ieee80211_bss_conf *bss_conf, - u32 changed) -{ - struct rt2x00lib_erp erp; - - memset(&erp, 0, sizeof(erp)); - - erp.short_preamble = bss_conf->use_short_preamble; - erp.cts_protection = bss_conf->use_cts_prot; - - erp.slot_time = bss_conf->use_short_slot ? SHORT_SLOT_TIME : SLOT_TIME; - erp.sifs = SIFS; - erp.pifs = bss_conf->use_short_slot ? SHORT_PIFS : PIFS; - erp.difs = bss_conf->use_short_slot ? SHORT_DIFS : DIFS; - erp.eifs = bss_conf->use_short_slot ? SHORT_EIFS : EIFS; - - erp.basic_rates = bss_conf->basic_rates; - erp.beacon_int = bss_conf->beacon_int; - - /* Update the AID, this is needed for dynamic PS support */ - rt2x00dev->aid = bss_conf->assoc ? bss_conf->aid : 0; - rt2x00dev->last_beacon = bss_conf->sync_tsf; - - /* Update global beacon interval time, this is needed for PS support */ - rt2x00dev->beacon_int = bss_conf->beacon_int; - - if (changed & BSS_CHANGED_HT) - erp.ht_opmode = bss_conf->ht_operation_mode; - - rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp, changed); -} - -void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, - struct antenna_setup config) -{ - struct link_ant *ant = &rt2x00dev->link.ant; - struct antenna_setup *def = &rt2x00dev->default_ant; - struct antenna_setup *active = &rt2x00dev->link.ant.active; - - /* - * When the caller tries to send the SW diversity, - * we must update the ANTENNA_RX_DIVERSITY flag to - * enable the antenna diversity in the link tuner. - * - * Secondly, we must guarentee we never send the - * software antenna diversity command to the driver. - */ - if (!(ant->flags & ANTENNA_RX_DIVERSITY)) { - if (config.rx == ANTENNA_SW_DIVERSITY) { - ant->flags |= ANTENNA_RX_DIVERSITY; - - if (def->rx == ANTENNA_SW_DIVERSITY) - config.rx = ANTENNA_B; - else - config.rx = def->rx; - } - } else if (config.rx == ANTENNA_SW_DIVERSITY) - config.rx = active->rx; - - if (!(ant->flags & ANTENNA_TX_DIVERSITY)) { - if (config.tx == ANTENNA_SW_DIVERSITY) { - ant->flags |= ANTENNA_TX_DIVERSITY; - - if (def->tx == ANTENNA_SW_DIVERSITY) - config.tx = ANTENNA_B; - else - config.tx = def->tx; - } - } else if (config.tx == ANTENNA_SW_DIVERSITY) - config.tx = active->tx; - - /* - * Antenna setup changes require the RX to be disabled, - * else the changes will be ignored by the device. - */ - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00queue_stop_queue(rt2x00dev->rx); - - /* - * Write new antenna setup to device and reset the link tuner. - * The latter is required since we need to recalibrate the - * noise-sensitivity ratio for the new setup. - */ - rt2x00dev->ops->lib->config_ant(rt2x00dev, &config); - - rt2x00link_reset_tuner(rt2x00dev, true); - - memcpy(active, &config, sizeof(config)); - - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00queue_start_queue(rt2x00dev->rx); -} - -static u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - int center_channel; - u16 i; - - /* - * Initialize center channel to current channel. - */ - center_channel = spec->channels[conf->chandef.chan->hw_value].channel; - - /* - * Adjust center channel to HT40+ and HT40- operation. - */ - if (conf_is_ht40_plus(conf)) - center_channel += 2; - else if (conf_is_ht40_minus(conf)) - center_channel -= (center_channel == 14) ? 1 : 2; - - for (i = 0; i < spec->num_channels; i++) - if (spec->channels[i].channel == center_channel) - return i; - - WARN_ON(1); - return conf->chandef.chan->hw_value; -} - -void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - unsigned int ieee80211_flags) -{ - struct rt2x00lib_conf libconf; - u16 hw_value; - u16 autowake_timeout; - u16 beacon_int; - u16 beacon_diff; - - memset(&libconf, 0, sizeof(libconf)); - - libconf.conf = conf; - - if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) { - if (!conf_is_ht(conf)) - set_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags); - else - clear_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags); - - if (conf_is_ht40(conf)) { - set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags); - hw_value = rt2x00ht_center_channel(rt2x00dev, conf); - } else { - clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags); - hw_value = conf->chandef.chan->hw_value; - } - - memcpy(&libconf.rf, - &rt2x00dev->spec.channels[hw_value], - sizeof(libconf.rf)); - - memcpy(&libconf.channel, - &rt2x00dev->spec.channels_info[hw_value], - sizeof(libconf.channel)); - - /* Used for VCO periodic calibration */ - rt2x00dev->rf_channel = libconf.rf.channel; - } - - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_PS_AUTOWAKE) && - (ieee80211_flags & IEEE80211_CONF_CHANGE_PS)) - cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); - - /* - * Start configuration. - */ - rt2x00dev->ops->lib->config(rt2x00dev, &libconf, ieee80211_flags); - - /* - * Some configuration changes affect the link quality - * which means we need to reset the link tuner. - */ - if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2x00link_reset_tuner(rt2x00dev, false); - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && - rt2x00_has_cap_flag(rt2x00dev, REQUIRE_PS_AUTOWAKE) && - (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) && - (conf->flags & IEEE80211_CONF_PS)) { - beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon; - beacon_int = msecs_to_jiffies(rt2x00dev->beacon_int); - - if (beacon_diff > beacon_int) - beacon_diff = 0; - - autowake_timeout = (conf->ps_dtim_period * beacon_int) - beacon_diff; - queue_delayed_work(rt2x00dev->workqueue, - &rt2x00dev->autowakeup_work, - autowake_timeout - 15); - } - - if (conf->flags & IEEE80211_CONF_PS) - set_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); - else - clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); - - rt2x00dev->curr_band = conf->chandef.chan->band; - rt2x00dev->curr_freq = conf->chandef.chan->center_freq; - rt2x00dev->tx_power = conf->power_level; - rt2x00dev->short_retry = conf->short_frame_max_tx_count; - rt2x00dev->long_retry = conf->long_frame_max_tx_count; -} diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c deleted file mode 100644 index a2fd05ba25ca..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 crypto specific routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) -{ - switch (key->cipher) { - case WLAN_CIPHER_SUITE_WEP40: - return CIPHER_WEP64; - case WLAN_CIPHER_SUITE_WEP104: - return CIPHER_WEP128; - case WLAN_CIPHER_SUITE_TKIP: - return CIPHER_TKIP; - case WLAN_CIPHER_SUITE_CCMP: - return CIPHER_AES; - default: - return CIPHER_NONE; - } -} - -void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; - - if (!rt2x00_has_cap_hw_crypto(rt2x00dev) || !hw_key) - return; - - __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); - - txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); - - if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE) - __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags); - - txdesc->key_idx = hw_key->hw_key_idx; - txdesc->iv_offset = txdesc->header_length; - txdesc->iv_len = hw_key->iv_len; - - if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) - __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags); - - if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) - __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); -} - -unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_key_conf *key = tx_info->control.hw_key; - unsigned int overhead = 0; - - if (!rt2x00_has_cap_hw_crypto(rt2x00dev) || !key) - return overhead; - - /* - * Extend frame length to include IV/EIV/ICV/MMIC, - * note that these lengths should only be added when - * mac80211 does not generate it. - */ - overhead += key->icv_len; - - if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) - overhead += key->iv_len; - - if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) { - if (key->cipher == WLAN_CIPHER_SUITE_TKIP) - overhead += 8; - } - - return overhead; -} - -void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - - if (unlikely(!txdesc->iv_len)) - return; - - /* Copy IV/EIV data */ - memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len); -} - -void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - - if (unlikely(!txdesc->iv_len)) - return; - - /* Copy IV/EIV data */ - memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len); - - /* Move ieee80211 header */ - memmove(skb->data + txdesc->iv_len, skb->data, txdesc->iv_offset); - - /* Pull buffer to correct size */ - skb_pull(skb, txdesc->iv_len); - txdesc->length -= txdesc->iv_len; - - /* IV/EIV data has officially been stripped */ - skbdesc->flags |= SKBDESC_IV_STRIPPED; -} - -void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - const unsigned int iv_len = - ((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4); - - if (!(skbdesc->flags & SKBDESC_IV_STRIPPED)) - return; - - skb_push(skb, iv_len); - - /* Move ieee80211 header */ - memmove(skb->data, skb->data + iv_len, header_length); - - /* Copy IV/EIV data */ - memcpy(skb->data + header_length, skbdesc->iv, iv_len); - - /* IV/EIV data has returned into the frame */ - skbdesc->flags &= ~SKBDESC_IV_STRIPPED; -} - -void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, - unsigned int header_length, - struct rxdone_entry_desc *rxdesc) -{ - unsigned int payload_len = rxdesc->size - header_length; - unsigned int align = ALIGN_SIZE(skb, header_length); - unsigned int iv_len; - unsigned int icv_len; - unsigned int transfer = 0; - - /* - * WEP64/WEP128: Provides IV & ICV - * TKIP: Provides IV/EIV & ICV - * AES: Provies IV/EIV & ICV - */ - switch (rxdesc->cipher) { - case CIPHER_WEP64: - case CIPHER_WEP128: - iv_len = 4; - icv_len = 4; - break; - case CIPHER_TKIP: - iv_len = 8; - icv_len = 4; - break; - case CIPHER_AES: - iv_len = 8; - icv_len = 8; - break; - default: - /* Unsupport type */ - return; - } - - /* - * Make room for new data. There are 2 possibilities - * either the alignment is already present between - * the 802.11 header and payload. In that case we - * we have to move the header less then the iv_len - * since we can use the already available l2pad bytes - * for the iv data. - * When the alignment must be added manually we must - * move the header more then iv_len since we must - * make room for the payload move as well. - */ - if (rxdesc->dev_flags & RXDONE_L2PAD) { - skb_push(skb, iv_len - align); - skb_put(skb, icv_len); - - /* Move ieee80211 header */ - memmove(skb->data + transfer, - skb->data + transfer + (iv_len - align), - header_length); - transfer += header_length; - } else { - skb_push(skb, iv_len + align); - if (align < icv_len) - skb_put(skb, icv_len - align); - else if (align > icv_len) - skb_trim(skb, rxdesc->size + iv_len + icv_len); - - /* Move ieee80211 header */ - memmove(skb->data + transfer, - skb->data + transfer + iv_len + align, - header_length); - transfer += header_length; - } - - /* Copy IV/EIV data */ - memcpy(skb->data + transfer, rxdesc->iv, iv_len); - transfer += iv_len; - - /* - * Move payload for alignment purposes. Note that - * this is only needed when no l2 padding is present. - */ - if (!(rxdesc->dev_flags & RXDONE_L2PAD)) { - memmove(skb->data + transfer, - skb->data + transfer + align, - payload_len); - } - - /* - * NOTE: Always count the payload as transferred, - * even when alignment was set to zero. This is required - * for determining the correct offset for the ICV data. - */ - transfer += payload_len; - - /* - * Copy ICV data - * AES appends 8 bytes, we can't fill the upper - * 4 bytes, but mac80211 doesn't care about what - * we provide here anyway and strips it immediately. - */ - memcpy(skb->data + transfer, &rxdesc->icv, 4); - transfer += icv_len; - - /* IV/EIV/ICV has been inserted into frame */ - rxdesc->size = transfer; - rxdesc->flags &= ~RX_FLAG_IV_STRIPPED; -} diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c deleted file mode 100644 index 90fdb02b55e7..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ /dev/null @@ -1,800 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 debugfs specific routines. - */ - -#include <linux/debugfs.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/poll.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/uaccess.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" -#include "rt2x00dump.h" - -#define MAX_LINE_LENGTH 64 - -struct rt2x00debug_crypto { - unsigned long success; - unsigned long icv_error; - unsigned long mic_error; - unsigned long key_error; -}; - -struct rt2x00debug_intf { - /* - * Pointer to driver structure where - * this debugfs entry belongs to. - */ - struct rt2x00_dev *rt2x00dev; - - /* - * Reference to the rt2x00debug structure - * which can be used to communicate with - * the registers. - */ - const struct rt2x00debug *debug; - - /* - * Debugfs entries for: - * - driver folder - * - driver file - * - chipset file - * - device state flags file - * - device capability flags file - * - register folder - * - csr offset/value files - * - eeprom offset/value files - * - bbp offset/value files - * - rf offset/value files - * - rfcsr offset/value files - * - queue folder - * - frame dump file - * - queue stats file - * - crypto stats file - */ - struct dentry *driver_folder; - struct dentry *driver_entry; - struct dentry *chipset_entry; - struct dentry *dev_flags; - struct dentry *cap_flags; - struct dentry *register_folder; - struct dentry *csr_off_entry; - struct dentry *csr_val_entry; - struct dentry *eeprom_off_entry; - struct dentry *eeprom_val_entry; - struct dentry *bbp_off_entry; - struct dentry *bbp_val_entry; - struct dentry *rf_off_entry; - struct dentry *rf_val_entry; - struct dentry *rfcsr_off_entry; - struct dentry *rfcsr_val_entry; - struct dentry *queue_folder; - struct dentry *queue_frame_dump_entry; - struct dentry *queue_stats_entry; - struct dentry *crypto_stats_entry; - - /* - * The frame dump file only allows a single reader, - * so we need to store the current state here. - */ - unsigned long frame_dump_flags; -#define FRAME_DUMP_FILE_OPEN 1 - - /* - * We queue each frame before dumping it to the user, - * per read command we will pass a single skb structure - * so we should be prepared to queue multiple sk buffers - * before sending it to userspace. - */ - struct sk_buff_head frame_dump_skbqueue; - wait_queue_head_t frame_dump_waitqueue; - - /* - * HW crypto statistics. - * All statistics are stored separately per cipher type. - */ - struct rt2x00debug_crypto crypto_stats[CIPHER_MAX]; - - /* - * Driver and chipset files will use a data buffer - * that has been created in advance. This will simplify - * the code since we can use the debugfs functions. - */ - struct debugfs_blob_wrapper driver_blob; - struct debugfs_blob_wrapper chipset_blob; - - /* - * Requested offset for each register type. - */ - unsigned int offset_csr; - unsigned int offset_eeprom; - unsigned int offset_bbp; - unsigned int offset_rf; - unsigned int offset_rfcsr; -}; - -void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, - struct rxdone_entry_desc *rxdesc) -{ - struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; - enum cipher cipher = rxdesc->cipher; - enum rx_crypto status = rxdesc->cipher_status; - - if (cipher == CIPHER_TKIP_NO_MIC) - cipher = CIPHER_TKIP; - if (cipher == CIPHER_NONE || cipher >= CIPHER_MAX) - return; - - /* Remove CIPHER_NONE index */ - cipher--; - - intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS); - intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV); - intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC); - intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY); -} - -void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, - enum rt2x00_dump_type type, struct sk_buff *skb) -{ - struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct sk_buff *skbcopy; - struct rt2x00dump_hdr *dump_hdr; - struct timeval timestamp; - u32 data_len; - - if (likely(!test_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags))) - return; - - do_gettimeofday(×tamp); - - if (skb_queue_len(&intf->frame_dump_skbqueue) > 20) { - rt2x00_dbg(rt2x00dev, "txrx dump queue length exceeded\n"); - return; - } - - data_len = skb->len; - if (skbdesc->flags & SKBDESC_DESC_IN_SKB) - data_len -= skbdesc->desc_len; - - skbcopy = alloc_skb(sizeof(*dump_hdr) + skbdesc->desc_len + data_len, - GFP_ATOMIC); - if (!skbcopy) { - rt2x00_dbg(rt2x00dev, "Failed to copy skb for dump\n"); - return; - } - - dump_hdr = (struct rt2x00dump_hdr *)skb_put(skbcopy, sizeof(*dump_hdr)); - dump_hdr->version = cpu_to_le32(DUMP_HEADER_VERSION); - dump_hdr->header_length = cpu_to_le32(sizeof(*dump_hdr)); - dump_hdr->desc_length = cpu_to_le32(skbdesc->desc_len); - dump_hdr->data_length = cpu_to_le32(data_len); - dump_hdr->chip_rt = cpu_to_le16(rt2x00dev->chip.rt); - dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf); - dump_hdr->chip_rev = cpu_to_le16(rt2x00dev->chip.rev); - dump_hdr->type = cpu_to_le16(type); - dump_hdr->queue_index = skbdesc->entry->queue->qid; - dump_hdr->entry_index = skbdesc->entry->entry_idx; - dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec); - dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec); - - if (!(skbdesc->flags & SKBDESC_DESC_IN_SKB)) - memcpy(skb_put(skbcopy, skbdesc->desc_len), skbdesc->desc, - skbdesc->desc_len); - memcpy(skb_put(skbcopy, skb->len), skb->data, skb->len); - - skb_queue_tail(&intf->frame_dump_skbqueue, skbcopy); - wake_up_interruptible(&intf->frame_dump_waitqueue); - - /* - * Verify that the file has not been closed while we were working. - */ - if (!test_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags)) - skb_queue_purge(&intf->frame_dump_skbqueue); -} -EXPORT_SYMBOL_GPL(rt2x00debug_dump_frame); - -static int rt2x00debug_file_open(struct inode *inode, struct file *file) -{ - struct rt2x00debug_intf *intf = inode->i_private; - - file->private_data = inode->i_private; - - if (!try_module_get(intf->debug->owner)) - return -EBUSY; - - return 0; -} - -static int rt2x00debug_file_release(struct inode *inode, struct file *file) -{ - struct rt2x00debug_intf *intf = file->private_data; - - module_put(intf->debug->owner); - - return 0; -} - -static int rt2x00debug_open_queue_dump(struct inode *inode, struct file *file) -{ - struct rt2x00debug_intf *intf = inode->i_private; - int retval; - - retval = rt2x00debug_file_open(inode, file); - if (retval) - return retval; - - if (test_and_set_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags)) { - rt2x00debug_file_release(inode, file); - return -EBUSY; - } - - return 0; -} - -static int rt2x00debug_release_queue_dump(struct inode *inode, struct file *file) -{ - struct rt2x00debug_intf *intf = inode->i_private; - - skb_queue_purge(&intf->frame_dump_skbqueue); - - clear_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags); - - return rt2x00debug_file_release(inode, file); -} - -static ssize_t rt2x00debug_read_queue_dump(struct file *file, - char __user *buf, - size_t length, - loff_t *offset) -{ - struct rt2x00debug_intf *intf = file->private_data; - struct sk_buff *skb; - size_t status; - int retval; - - if (file->f_flags & O_NONBLOCK) - return -EAGAIN; - - retval = - wait_event_interruptible(intf->frame_dump_waitqueue, - (skb = - skb_dequeue(&intf->frame_dump_skbqueue))); - if (retval) - return retval; - - status = min_t(size_t, skb->len, length); - if (copy_to_user(buf, skb->data, status)) { - status = -EFAULT; - goto exit; - } - - *offset += status; - -exit: - kfree_skb(skb); - - return status; -} - -static unsigned int rt2x00debug_poll_queue_dump(struct file *file, - poll_table *wait) -{ - struct rt2x00debug_intf *intf = file->private_data; - - poll_wait(file, &intf->frame_dump_waitqueue, wait); - - if (!skb_queue_empty(&intf->frame_dump_skbqueue)) - return POLLOUT | POLLWRNORM; - - return 0; -} - -static const struct file_operations rt2x00debug_fop_queue_dump = { - .owner = THIS_MODULE, - .read = rt2x00debug_read_queue_dump, - .poll = rt2x00debug_poll_queue_dump, - .open = rt2x00debug_open_queue_dump, - .release = rt2x00debug_release_queue_dump, - .llseek = default_llseek, -}; - -static ssize_t rt2x00debug_read_queue_stats(struct file *file, - char __user *buf, - size_t length, - loff_t *offset) -{ - struct rt2x00debug_intf *intf = file->private_data; - struct data_queue *queue; - unsigned long irqflags; - unsigned int lines = 1 + intf->rt2x00dev->data_queues; - size_t size; - char *data; - char *temp; - - if (*offset) - return 0; - - data = kcalloc(lines, MAX_LINE_LENGTH, GFP_KERNEL); - if (!data) - return -ENOMEM; - - temp = data + - sprintf(data, "qid\tflags\t\tcount\tlimit\tlength\tindex\tdma done\tdone\n"); - - queue_for_each(intf->rt2x00dev, queue) { - spin_lock_irqsave(&queue->index_lock, irqflags); - - temp += sprintf(temp, "%d\t0x%.8x\t%d\t%d\t%d\t%d\t%d\t\t%d\n", - queue->qid, (unsigned int)queue->flags, - queue->count, queue->limit, queue->length, - queue->index[Q_INDEX], - queue->index[Q_INDEX_DMA_DONE], - queue->index[Q_INDEX_DONE]); - - spin_unlock_irqrestore(&queue->index_lock, irqflags); - } - - size = strlen(data); - size = min(size, length); - - if (copy_to_user(buf, data, size)) { - kfree(data); - return -EFAULT; - } - - kfree(data); - - *offset += size; - return size; -} - -static const struct file_operations rt2x00debug_fop_queue_stats = { - .owner = THIS_MODULE, - .read = rt2x00debug_read_queue_stats, - .open = rt2x00debug_file_open, - .release = rt2x00debug_file_release, - .llseek = default_llseek, -}; - -#ifdef CONFIG_RT2X00_LIB_CRYPTO -static ssize_t rt2x00debug_read_crypto_stats(struct file *file, - char __user *buf, - size_t length, - loff_t *offset) -{ - struct rt2x00debug_intf *intf = file->private_data; - static const char * const name[] = { "WEP64", "WEP128", "TKIP", "AES" }; - char *data; - char *temp; - size_t size; - unsigned int i; - - if (*offset) - return 0; - - data = kzalloc((1 + CIPHER_MAX) * MAX_LINE_LENGTH, GFP_KERNEL); - if (!data) - return -ENOMEM; - - temp = data; - temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n"); - - for (i = 0; i < CIPHER_MAX; i++) { - temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i], - intf->crypto_stats[i].success, - intf->crypto_stats[i].icv_error, - intf->crypto_stats[i].mic_error, - intf->crypto_stats[i].key_error); - } - - size = strlen(data); - size = min(size, length); - - if (copy_to_user(buf, data, size)) { - kfree(data); - return -EFAULT; - } - - kfree(data); - - *offset += size; - return size; -} - -static const struct file_operations rt2x00debug_fop_crypto_stats = { - .owner = THIS_MODULE, - .read = rt2x00debug_read_crypto_stats, - .open = rt2x00debug_file_open, - .release = rt2x00debug_file_release, - .llseek = default_llseek, -}; -#endif - -#define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \ -static ssize_t rt2x00debug_read_##__name(struct file *file, \ - char __user *buf, \ - size_t length, \ - loff_t *offset) \ -{ \ - struct rt2x00debug_intf *intf = file->private_data; \ - const struct rt2x00debug *debug = intf->debug; \ - char line[16]; \ - size_t size; \ - unsigned int index = intf->offset_##__name; \ - __type value; \ - \ - if (*offset) \ - return 0; \ - \ - if (index >= debug->__name.word_count) \ - return -EINVAL; \ - \ - index += (debug->__name.word_base / \ - debug->__name.word_size); \ - \ - if (debug->__name.flags & RT2X00DEBUGFS_OFFSET) \ - index *= debug->__name.word_size; \ - \ - debug->__name.read(intf->rt2x00dev, index, &value); \ - \ - size = sprintf(line, __format, value); \ - \ - if (copy_to_user(buf, line, size)) \ - return -EFAULT; \ - \ - *offset += size; \ - return size; \ -} - -#define RT2X00DEBUGFS_OPS_WRITE(__name, __type) \ -static ssize_t rt2x00debug_write_##__name(struct file *file, \ - const char __user *buf,\ - size_t length, \ - loff_t *offset) \ -{ \ - struct rt2x00debug_intf *intf = file->private_data; \ - const struct rt2x00debug *debug = intf->debug; \ - char line[16]; \ - size_t size; \ - unsigned int index = intf->offset_##__name; \ - __type value; \ - \ - if (*offset) \ - return 0; \ - \ - if (index >= debug->__name.word_count) \ - return -EINVAL; \ - \ - if (length > sizeof(line)) \ - return -EINVAL; \ - \ - if (copy_from_user(line, buf, length)) \ - return -EFAULT; \ - \ - size = strlen(line); \ - value = simple_strtoul(line, NULL, 0); \ - \ - index += (debug->__name.word_base / \ - debug->__name.word_size); \ - \ - if (debug->__name.flags & RT2X00DEBUGFS_OFFSET) \ - index *= debug->__name.word_size; \ - \ - debug->__name.write(intf->rt2x00dev, index, value); \ - \ - *offset += size; \ - return size; \ -} - -#define RT2X00DEBUGFS_OPS(__name, __format, __type) \ -RT2X00DEBUGFS_OPS_READ(__name, __format, __type); \ -RT2X00DEBUGFS_OPS_WRITE(__name, __type); \ - \ -static const struct file_operations rt2x00debug_fop_##__name = {\ - .owner = THIS_MODULE, \ - .read = rt2x00debug_read_##__name, \ - .write = rt2x00debug_write_##__name, \ - .open = rt2x00debug_file_open, \ - .release = rt2x00debug_file_release, \ - .llseek = generic_file_llseek, \ -}; - -RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32); -RT2X00DEBUGFS_OPS(eeprom, "0x%.4x\n", u16); -RT2X00DEBUGFS_OPS(bbp, "0x%.2x\n", u8); -RT2X00DEBUGFS_OPS(rf, "0x%.8x\n", u32); -RT2X00DEBUGFS_OPS(rfcsr, "0x%.2x\n", u8); - -static ssize_t rt2x00debug_read_dev_flags(struct file *file, - char __user *buf, - size_t length, - loff_t *offset) -{ - struct rt2x00debug_intf *intf = file->private_data; - char line[16]; - size_t size; - - if (*offset) - return 0; - - size = sprintf(line, "0x%.8x\n", (unsigned int)intf->rt2x00dev->flags); - - if (copy_to_user(buf, line, size)) - return -EFAULT; - - *offset += size; - return size; -} - -static const struct file_operations rt2x00debug_fop_dev_flags = { - .owner = THIS_MODULE, - .read = rt2x00debug_read_dev_flags, - .open = rt2x00debug_file_open, - .release = rt2x00debug_file_release, - .llseek = default_llseek, -}; - -static ssize_t rt2x00debug_read_cap_flags(struct file *file, - char __user *buf, - size_t length, - loff_t *offset) -{ - struct rt2x00debug_intf *intf = file->private_data; - char line[16]; - size_t size; - - if (*offset) - return 0; - - size = sprintf(line, "0x%.8x\n", (unsigned int)intf->rt2x00dev->cap_flags); - - if (copy_to_user(buf, line, size)) - return -EFAULT; - - *offset += size; - return size; -} - -static const struct file_operations rt2x00debug_fop_cap_flags = { - .owner = THIS_MODULE, - .read = rt2x00debug_read_cap_flags, - .open = rt2x00debug_file_open, - .release = rt2x00debug_file_release, - .llseek = default_llseek, -}; - -static struct dentry *rt2x00debug_create_file_driver(const char *name, - struct rt2x00debug_intf - *intf, - struct debugfs_blob_wrapper - *blob) -{ - char *data; - - data = kzalloc(3 * MAX_LINE_LENGTH, GFP_KERNEL); - if (!data) - return NULL; - - blob->data = data; - data += sprintf(data, "driver:\t%s\n", intf->rt2x00dev->ops->name); - data += sprintf(data, "version:\t%s\n", DRV_VERSION); - blob->size = strlen(blob->data); - - return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); -} - -static struct dentry *rt2x00debug_create_file_chipset(const char *name, - struct rt2x00debug_intf - *intf, - struct - debugfs_blob_wrapper - *blob) -{ - const struct rt2x00debug *debug = intf->debug; - char *data; - - data = kzalloc(9 * MAX_LINE_LENGTH, GFP_KERNEL); - if (!data) - return NULL; - - blob->data = data; - data += sprintf(data, "rt chip:\t%04x\n", intf->rt2x00dev->chip.rt); - data += sprintf(data, "rf chip:\t%04x\n", intf->rt2x00dev->chip.rf); - data += sprintf(data, "revision:\t%04x\n", intf->rt2x00dev->chip.rev); - data += sprintf(data, "\n"); - data += sprintf(data, "register\tbase\twords\twordsize\n"); -#define RT2X00DEBUGFS_SPRINTF_REGISTER(__name) \ -{ \ - if(debug->__name.read) \ - data += sprintf(data, __stringify(__name) \ - "\t%d\t%d\t%d\n", \ - debug->__name.word_base, \ - debug->__name.word_count, \ - debug->__name.word_size); \ -} - RT2X00DEBUGFS_SPRINTF_REGISTER(csr); - RT2X00DEBUGFS_SPRINTF_REGISTER(eeprom); - RT2X00DEBUGFS_SPRINTF_REGISTER(bbp); - RT2X00DEBUGFS_SPRINTF_REGISTER(rf); - RT2X00DEBUGFS_SPRINTF_REGISTER(rfcsr); -#undef RT2X00DEBUGFS_SPRINTF_REGISTER - - blob->size = strlen(blob->data); - - return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); -} - -void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) -{ - const struct rt2x00debug *debug = rt2x00dev->ops->debugfs; - struct rt2x00debug_intf *intf; - - intf = kzalloc(sizeof(struct rt2x00debug_intf), GFP_KERNEL); - if (!intf) { - rt2x00_err(rt2x00dev, "Failed to allocate debug handler\n"); - return; - } - - intf->debug = debug; - intf->rt2x00dev = rt2x00dev; - rt2x00dev->debugfs_intf = intf; - - intf->driver_folder = - debugfs_create_dir(intf->rt2x00dev->ops->name, - rt2x00dev->hw->wiphy->debugfsdir); - if (IS_ERR(intf->driver_folder) || !intf->driver_folder) - goto exit; - - intf->driver_entry = - rt2x00debug_create_file_driver("driver", intf, &intf->driver_blob); - if (IS_ERR(intf->driver_entry) || !intf->driver_entry) - goto exit; - - intf->chipset_entry = - rt2x00debug_create_file_chipset("chipset", - intf, &intf->chipset_blob); - if (IS_ERR(intf->chipset_entry) || !intf->chipset_entry) - goto exit; - - intf->dev_flags = debugfs_create_file("dev_flags", S_IRUSR, - intf->driver_folder, intf, - &rt2x00debug_fop_dev_flags); - if (IS_ERR(intf->dev_flags) || !intf->dev_flags) - goto exit; - - intf->cap_flags = debugfs_create_file("cap_flags", S_IRUSR, - intf->driver_folder, intf, - &rt2x00debug_fop_cap_flags); - if (IS_ERR(intf->cap_flags) || !intf->cap_flags) - goto exit; - - intf->register_folder = - debugfs_create_dir("register", intf->driver_folder); - if (IS_ERR(intf->register_folder) || !intf->register_folder) - goto exit; - -#define RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(__intf, __name) \ -({ \ - if(debug->__name.read) { \ - (__intf)->__name##_off_entry = \ - debugfs_create_u32(__stringify(__name) "_offset", \ - S_IRUSR | S_IWUSR, \ - (__intf)->register_folder, \ - &(__intf)->offset_##__name); \ - if (IS_ERR((__intf)->__name##_off_entry) \ - || !(__intf)->__name##_off_entry) \ - goto exit; \ - \ - (__intf)->__name##_val_entry = \ - debugfs_create_file(__stringify(__name) "_value", \ - S_IRUSR | S_IWUSR, \ - (__intf)->register_folder, \ - (__intf), &rt2x00debug_fop_##__name); \ - if (IS_ERR((__intf)->__name##_val_entry) \ - || !(__intf)->__name##_val_entry) \ - goto exit; \ - } \ -}) - - RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, csr); - RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, eeprom); - RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, bbp); - RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, rf); - RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, rfcsr); - -#undef RT2X00DEBUGFS_CREATE_REGISTER_ENTRY - - intf->queue_folder = - debugfs_create_dir("queue", intf->driver_folder); - if (IS_ERR(intf->queue_folder) || !intf->queue_folder) - goto exit; - - intf->queue_frame_dump_entry = - debugfs_create_file("dump", S_IRUSR, intf->queue_folder, - intf, &rt2x00debug_fop_queue_dump); - if (IS_ERR(intf->queue_frame_dump_entry) - || !intf->queue_frame_dump_entry) - goto exit; - - skb_queue_head_init(&intf->frame_dump_skbqueue); - init_waitqueue_head(&intf->frame_dump_waitqueue); - - intf->queue_stats_entry = - debugfs_create_file("queue", S_IRUSR, intf->queue_folder, - intf, &rt2x00debug_fop_queue_stats); - -#ifdef CONFIG_RT2X00_LIB_CRYPTO - if (rt2x00_has_cap_hw_crypto(rt2x00dev)) - intf->crypto_stats_entry = - debugfs_create_file("crypto", S_IRUGO, intf->queue_folder, - intf, &rt2x00debug_fop_crypto_stats); -#endif - - return; - -exit: - rt2x00debug_deregister(rt2x00dev); - rt2x00_err(rt2x00dev, "Failed to register debug handler\n"); -} - -void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) -{ - struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; - - if (unlikely(!intf)) - return; - - skb_queue_purge(&intf->frame_dump_skbqueue); - -#ifdef CONFIG_RT2X00_LIB_CRYPTO - debugfs_remove(intf->crypto_stats_entry); -#endif - debugfs_remove(intf->queue_stats_entry); - debugfs_remove(intf->queue_frame_dump_entry); - debugfs_remove(intf->queue_folder); - debugfs_remove(intf->rfcsr_val_entry); - debugfs_remove(intf->rfcsr_off_entry); - debugfs_remove(intf->rf_val_entry); - debugfs_remove(intf->rf_off_entry); - debugfs_remove(intf->bbp_val_entry); - debugfs_remove(intf->bbp_off_entry); - debugfs_remove(intf->eeprom_val_entry); - debugfs_remove(intf->eeprom_off_entry); - debugfs_remove(intf->csr_val_entry); - debugfs_remove(intf->csr_off_entry); - debugfs_remove(intf->register_folder); - debugfs_remove(intf->dev_flags); - debugfs_remove(intf->cap_flags); - debugfs_remove(intf->chipset_entry); - debugfs_remove(intf->driver_entry); - debugfs_remove(intf->driver_folder); - kfree(intf->chipset_blob.data); - kfree(intf->driver_blob.data); - kfree(intf); - - rt2x00dev->debugfs_intf = NULL; -} diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h deleted file mode 100644 index e65712c235bd..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00debug.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00debug - Abstract: Data structures for the rt2x00debug. - */ - -#ifndef RT2X00DEBUG_H -#define RT2X00DEBUG_H - -struct rt2x00_dev; - -/** - * enum rt2x00debugfs_entry_flags: Flags for debugfs registry entry - * - * @RT2X00DEBUGFS_OFFSET: rt2x00lib should pass the register offset - * as argument when using the callback function read()/write() - */ -enum rt2x00debugfs_entry_flags { - RT2X00DEBUGFS_OFFSET = (1 << 0), -}; - -#define RT2X00DEBUGFS_REGISTER_ENTRY(__name, __type) \ -struct reg##__name { \ - void (*read)(struct rt2x00_dev *rt2x00dev, \ - const unsigned int word, __type *data); \ - void (*write)(struct rt2x00_dev *rt2x00dev, \ - const unsigned int word, __type data); \ - \ - unsigned int flags; \ - \ - unsigned int word_base; \ - unsigned int word_size; \ - unsigned int word_count; \ -} __name - -struct rt2x00debug { - /* - * Reference to the modules structure. - */ - struct module *owner; - - /* - * Register access entries. - */ - RT2X00DEBUGFS_REGISTER_ENTRY(csr, u32); - RT2X00DEBUGFS_REGISTER_ENTRY(eeprom, u16); - RT2X00DEBUGFS_REGISTER_ENTRY(bbp, u8); - RT2X00DEBUGFS_REGISTER_ENTRY(rf, u32); - RT2X00DEBUGFS_REGISTER_ENTRY(rfcsr, u8); -}; - -#endif /* RT2X00DEBUG_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c deleted file mode 100644 index 5639ed816813..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ /dev/null @@ -1,1549 +0,0 @@ -/* - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 generic device routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/log2.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -/* - * Utility functions. - */ -u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif) -{ - /* - * When in STA mode, bssidx is always 0 otherwise local_address[5] - * contains the bss number, see BSS_ID_MASK comments for details. - */ - if (rt2x00dev->intf_sta_count) - return 0; - return vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1); -} -EXPORT_SYMBOL_GPL(rt2x00lib_get_bssidx); - -/* - * Radio control handlers. - */ -int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - int status; - - /* - * Don't enable the radio twice. - * And check if the hardware button has been disabled. - */ - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return 0; - - /* - * Initialize all data queues. - */ - rt2x00queue_init_queues(rt2x00dev); - - /* - * Enable radio. - */ - status = - rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON); - if (status) - return status; - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON); - - rt2x00leds_led_radio(rt2x00dev, true); - rt2x00led_led_activity(rt2x00dev, true); - - set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); - - /* - * Enable queues. - */ - rt2x00queue_start_queues(rt2x00dev); - rt2x00link_start_tuner(rt2x00dev); - rt2x00link_start_agc(rt2x00dev); - if (rt2x00_has_cap_vco_recalibration(rt2x00dev)) - rt2x00link_start_vcocal(rt2x00dev); - - /* - * Start watchdog monitoring. - */ - rt2x00link_start_watchdog(rt2x00dev); - - return 0; -} - -void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* - * Stop watchdog monitoring. - */ - rt2x00link_stop_watchdog(rt2x00dev); - - /* - * Stop all queues - */ - rt2x00link_stop_agc(rt2x00dev); - if (rt2x00_has_cap_vco_recalibration(rt2x00dev)) - rt2x00link_stop_vcocal(rt2x00dev); - rt2x00link_stop_tuner(rt2x00dev); - rt2x00queue_stop_queues(rt2x00dev); - rt2x00queue_flush_queues(rt2x00dev, true); - - /* - * Disable radio. - */ - rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); - rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF); - rt2x00led_led_activity(rt2x00dev, false); - rt2x00leds_led_radio(rt2x00dev, false); -} - -static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = data; - struct rt2x00_intf *intf = vif_to_intf(vif); - - /* - * It is possible the radio was disabled while the work had been - * scheduled. If that happens we should return here immediately, - * note that in the spinlock protected area above the delayed_flags - * have been cleared correctly. - */ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags)) { - mutex_lock(&intf->beacon_skb_mutex); - rt2x00queue_update_beacon(rt2x00dev, vif); - mutex_unlock(&intf->beacon_skb_mutex); - } -} - -static void rt2x00lib_intf_scheduled(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, intf_work); - - /* - * Iterate over each interface and perform the - * requested configurations. - */ - ieee80211_iterate_active_interfaces(rt2x00dev->hw, - IEEE80211_IFACE_ITER_RESUME_ALL, - rt2x00lib_intf_scheduled_iter, - rt2x00dev); -} - -static void rt2x00lib_autowakeup(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, autowakeup_work.work); - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return; - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - rt2x00_err(rt2x00dev, "Device failed to wakeup\n"); - clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); -} - -/* - * Interrupt context handlers. - */ -static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac, - struct ieee80211_vif *vif) -{ - struct ieee80211_tx_control control = {}; - struct rt2x00_dev *rt2x00dev = data; - struct sk_buff *skb; - - /* - * Only AP mode interfaces do broad- and multicast buffering - */ - if (vif->type != NL80211_IFTYPE_AP) - return; - - /* - * Send out buffered broad- and multicast frames - */ - skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif); - while (skb) { - rt2x00mac_tx(rt2x00dev->hw, &control, skb); - skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif); - } -} - -static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = data; - - if (vif->type != NL80211_IFTYPE_AP && - vif->type != NL80211_IFTYPE_ADHOC && - vif->type != NL80211_IFTYPE_MESH_POINT && - vif->type != NL80211_IFTYPE_WDS) - return; - - /* - * Update the beacon without locking. This is safe on PCI devices - * as they only update the beacon periodically here. This should - * never be called for USB devices. - */ - WARN_ON(rt2x00_is_usb(rt2x00dev)); - rt2x00queue_update_beacon(rt2x00dev, vif); -} - -void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* send buffered bc/mc frames out for every bssid */ - ieee80211_iterate_active_interfaces_atomic( - rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL, - rt2x00lib_bc_buffer_iter, rt2x00dev); - /* - * Devices with pre tbtt interrupt don't need to update the beacon - * here as they will fetch the next beacon directly prior to - * transmission. - */ - if (rt2x00_has_cap_pre_tbtt_interrupt(rt2x00dev)) - return; - - /* fetch next beacon */ - ieee80211_iterate_active_interfaces_atomic( - rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL, - rt2x00lib_beaconupdate_iter, rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); - -void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* fetch next beacon */ - ieee80211_iterate_active_interfaces_atomic( - rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL, - rt2x00lib_beaconupdate_iter, rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt); - -void rt2x00lib_dmastart(struct queue_entry *entry) -{ - set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - rt2x00queue_index_inc(entry, Q_INDEX); -} -EXPORT_SYMBOL_GPL(rt2x00lib_dmastart); - -void rt2x00lib_dmadone(struct queue_entry *entry) -{ - set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags); - clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE); -} -EXPORT_SYMBOL_GPL(rt2x00lib_dmadone); - -static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct ieee80211_bar *bar = (void *) entry->skb->data; - struct rt2x00_bar_list_entry *bar_entry; - int ret; - - if (likely(!ieee80211_is_back_req(bar->frame_control))) - return 0; - - /* - * Unlike all other frames, the status report for BARs does - * not directly come from the hardware as it is incapable of - * matching a BA to a previously send BAR. The hardware will - * report all BARs as if they weren't acked at all. - * - * Instead the RX-path will scan for incoming BAs and set the - * block_acked flag if it sees one that was likely caused by - * a BAR from us. - * - * Remove remaining BARs here and return their status for - * TX done processing. - */ - ret = 0; - rcu_read_lock(); - list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) { - if (bar_entry->entry != entry) - continue; - - spin_lock_bh(&rt2x00dev->bar_list_lock); - /* Return whether this BAR was blockacked or not */ - ret = bar_entry->block_acked; - /* Remove the BAR from our checklist */ - list_del_rcu(&bar_entry->list); - spin_unlock_bh(&rt2x00dev->bar_list_lock); - kfree_rcu(bar_entry, head); - - break; - } - rcu_read_unlock(); - - return ret; -} - -void rt2x00lib_txdone(struct queue_entry *entry, - struct txdone_entry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - unsigned int header_length, i; - u8 rate_idx, rate_flags, retry_rates; - u8 skbdesc_flags = skbdesc->flags; - bool success; - - /* - * Unmap the skb. - */ - rt2x00queue_unmap_skb(entry); - - /* - * Remove the extra tx headroom from the skb. - */ - skb_pull(entry->skb, rt2x00dev->extra_tx_headroom); - - /* - * Signal that the TX descriptor is no longer in the skb. - */ - skbdesc->flags &= ~SKBDESC_DESC_IN_SKB; - - /* - * Determine the length of 802.11 header. - */ - header_length = ieee80211_get_hdrlen_from_skb(entry->skb); - - /* - * Remove L2 padding which was added during - */ - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) - rt2x00queue_remove_l2pad(entry->skb, header_length); - - /* - * If the IV/EIV data was stripped from the frame before it was - * passed to the hardware, we should now reinsert it again because - * mac80211 will expect the same data to be present it the - * frame as it was passed to us. - */ - if (rt2x00_has_cap_hw_crypto(rt2x00dev)) - rt2x00crypto_tx_insert_iv(entry->skb, header_length); - - /* - * Send frame to debugfs immediately, after this call is completed - * we are going to overwrite the skb->cb array. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb); - - /* - * Determine if the frame has been successfully transmitted and - * remove BARs from our check list while checking for their - * TX status. - */ - success = - rt2x00lib_txdone_bar_status(entry) || - test_bit(TXDONE_SUCCESS, &txdesc->flags) || - test_bit(TXDONE_UNKNOWN, &txdesc->flags); - - /* - * Update TX statistics. - */ - rt2x00dev->link.qual.tx_success += success; - rt2x00dev->link.qual.tx_failed += !success; - - rate_idx = skbdesc->tx_rate_idx; - rate_flags = skbdesc->tx_rate_flags; - retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ? - (txdesc->retry + 1) : 1; - - /* - * Initialize TX status - */ - memset(&tx_info->status, 0, sizeof(tx_info->status)); - tx_info->status.ack_signal = 0; - - /* - * Frame was send with retries, hardware tried - * different rates to send out the frame, at each - * retry it lowered the rate 1 step except when the - * lowest rate was used. - */ - for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) { - tx_info->status.rates[i].idx = rate_idx - i; - tx_info->status.rates[i].flags = rate_flags; - - if (rate_idx - i == 0) { - /* - * The lowest rate (index 0) was used until the - * number of max retries was reached. - */ - tx_info->status.rates[i].count = retry_rates - i; - i++; - break; - } - tx_info->status.rates[i].count = 1; - } - if (i < (IEEE80211_TX_MAX_RATES - 1)) - tx_info->status.rates[i].idx = -1; /* terminate */ - - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (success) - tx_info->flags |= IEEE80211_TX_STAT_ACK; - else - rt2x00dev->low_level_stats.dot11ACKFailureCount++; - } - - /* - * Every single frame has it's own tx status, hence report - * every frame as ampdu of size 1. - * - * TODO: if we can find out how many frames were aggregated - * by the hw we could provide the real ampdu_len to mac80211 - * which would allow the rc algorithm to better decide on - * which rates are suitable. - */ - if (test_bit(TXDONE_AMPDU, &txdesc->flags) || - tx_info->flags & IEEE80211_TX_CTL_AMPDU) { - tx_info->flags |= IEEE80211_TX_STAT_AMPDU; - tx_info->status.ampdu_len = 1; - tx_info->status.ampdu_ack_len = success ? 1 : 0; - - if (!success) - tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - } - - if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { - if (success) - rt2x00dev->low_level_stats.dot11RTSSuccessCount++; - else - rt2x00dev->low_level_stats.dot11RTSFailureCount++; - } - - /* - * Only send the status report to mac80211 when it's a frame - * that originated in mac80211. If this was a extra frame coming - * through a mac80211 library call (RTS/CTS) then we should not - * send the status report back. - */ - if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) { - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TASKLET_CONTEXT)) - ieee80211_tx_status(rt2x00dev->hw, entry->skb); - else - ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb); - } else - dev_kfree_skb_any(entry->skb); - - /* - * Make this entry available for reuse. - */ - entry->skb = NULL; - entry->flags = 0; - - rt2x00dev->ops->lib->clear_entry(entry); - - rt2x00queue_index_inc(entry, Q_INDEX_DONE); - - /* - * If the data queue was below the threshold before the txdone - * handler we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. This has to be - * serialized with rt2x00mac_tx(), otherwise we can wake up queue - * before it was stopped. - */ - spin_lock_bh(&entry->queue->tx_lock); - if (!rt2x00queue_threshold(entry->queue)) - rt2x00queue_unpause_queue(entry->queue); - spin_unlock_bh(&entry->queue->tx_lock); -} -EXPORT_SYMBOL_GPL(rt2x00lib_txdone); - -void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status) -{ - struct txdone_entry_desc txdesc; - - txdesc.flags = 0; - __set_bit(status, &txdesc.flags); - txdesc.retry = 0; - - rt2x00lib_txdone(entry, &txdesc); -} -EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo); - -static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie) -{ - struct ieee80211_mgmt *mgmt = (void *)data; - u8 *pos, *end; - - pos = (u8 *)mgmt->u.beacon.variable; - end = data + len; - while (pos < end) { - if (pos + 2 + pos[1] > end) - return NULL; - - if (pos[0] == ie) - return pos; - - pos += 2 + pos[1]; - } - - return NULL; -} - -static void rt2x00lib_sleep(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, sleep_work); - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return; - - /* - * Check again is powersaving is enabled, to prevent races from delayed - * work execution. - */ - if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags)) - rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, - IEEE80211_CONF_CHANGE_PS); -} - -static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct rxdone_entry_desc *rxdesc) -{ - struct rt2x00_bar_list_entry *entry; - struct ieee80211_bar *ba = (void *)skb->data; - - if (likely(!ieee80211_is_back(ba->frame_control))) - return; - - if (rxdesc->size < sizeof(*ba) + FCS_LEN) - return; - - rcu_read_lock(); - list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) { - - if (ba->start_seq_num != entry->start_seq_num) - continue; - -#define TID_CHECK(a, b) ( \ - ((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) == \ - ((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK))) \ - - if (!TID_CHECK(ba->control, entry->control)) - continue; - -#undef TID_CHECK - - if (!ether_addr_equal_64bits(ba->ra, entry->ta)) - continue; - - if (!ether_addr_equal_64bits(ba->ta, entry->ra)) - continue; - - /* Mark BAR since we received the according BA */ - spin_lock_bh(&rt2x00dev->bar_list_lock); - entry->block_acked = 1; - spin_unlock_bh(&rt2x00dev->bar_list_lock); - break; - } - rcu_read_unlock(); - -} - -static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct rxdone_entry_desc *rxdesc) -{ - struct ieee80211_hdr *hdr = (void *) skb->data; - struct ieee80211_tim_ie *tim_ie; - u8 *tim; - u8 tim_len; - bool cam; - - /* If this is not a beacon, or if mac80211 has no powersaving - * configured, or if the device is already in powersaving mode - * we can exit now. */ - if (likely(!ieee80211_is_beacon(hdr->frame_control) || - !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS))) - return; - - /* min. beacon length + FCS_LEN */ - if (skb->len <= 40 + FCS_LEN) - return; - - /* and only beacons from the associated BSSID, please */ - if (!(rxdesc->dev_flags & RXDONE_MY_BSS) || - !rt2x00dev->aid) - return; - - rt2x00dev->last_beacon = jiffies; - - tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM); - if (!tim) - return; - - if (tim[1] < sizeof(*tim_ie)) - return; - - tim_len = tim[1]; - tim_ie = (struct ieee80211_tim_ie *) &tim[2]; - - /* Check whenever the PHY can be turned off again. */ - - /* 1. What about buffered unicast traffic for our AID? */ - cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid); - - /* 2. Maybe the AP wants to send multicast/broadcast data? */ - cam |= (tim_ie->bitmap_ctrl & 0x01); - - if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags)) - queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work); -} - -static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev, - struct rxdone_entry_desc *rxdesc) -{ - struct ieee80211_supported_band *sband; - const struct rt2x00_rate *rate; - unsigned int i; - int signal = rxdesc->signal; - int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK); - - switch (rxdesc->rate_mode) { - case RATE_MODE_CCK: - case RATE_MODE_OFDM: - /* - * For non-HT rates the MCS value needs to contain the - * actually used rate modulation (CCK or OFDM). - */ - if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS) - signal = RATE_MCS(rxdesc->rate_mode, signal); - - sband = &rt2x00dev->bands[rt2x00dev->curr_band]; - for (i = 0; i < sband->n_bitrates; i++) { - rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - if (((type == RXDONE_SIGNAL_PLCP) && - (rate->plcp == signal)) || - ((type == RXDONE_SIGNAL_BITRATE) && - (rate->bitrate == signal)) || - ((type == RXDONE_SIGNAL_MCS) && - (rate->mcs == signal))) { - return i; - } - } - break; - case RATE_MODE_HT_MIX: - case RATE_MODE_HT_GREENFIELD: - if (signal >= 0 && signal <= 76) - return signal; - break; - default: - break; - } - - rt2x00_warn(rt2x00dev, "Frame received with unrecognized signal, mode=0x%.4x, signal=0x%.4x, type=%d\n", - rxdesc->rate_mode, signal, type); - return 0; -} - -void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct rxdone_entry_desc rxdesc; - struct sk_buff *skb; - struct ieee80211_rx_status *rx_status; - unsigned int header_length; - int rate_idx; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || - !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - goto submit_entry; - - if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) - goto submit_entry; - - /* - * Allocate a new sk_buffer. If no new buffer available, drop the - * received frame and reuse the existing buffer. - */ - skb = rt2x00queue_alloc_rxskb(entry, gfp); - if (!skb) - goto submit_entry; - - /* - * Unmap the skb. - */ - rt2x00queue_unmap_skb(entry); - - /* - * Extract the RXD details. - */ - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - - /* - * Check for valid size in case we get corrupted descriptor from - * hardware. - */ - if (unlikely(rxdesc.size == 0 || - rxdesc.size > entry->queue->data_size)) { - rt2x00_err(rt2x00dev, "Wrong frame size %d max %d\n", - rxdesc.size, entry->queue->data_size); - dev_kfree_skb(entry->skb); - goto renew_skb; - } - - /* - * The data behind the ieee80211 header must be - * aligned on a 4 byte boundary. - */ - header_length = ieee80211_get_hdrlen_from_skb(entry->skb); - - /* - * Hardware might have stripped the IV/EIV/ICV data, - * in that case it is possible that the data was - * provided separately (through hardware descriptor) - * in which case we should reinsert the data into the frame. - */ - if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && - (rxdesc.flags & RX_FLAG_IV_STRIPPED)) - rt2x00crypto_rx_insert_iv(entry->skb, header_length, - &rxdesc); - else if (header_length && - (rxdesc.size > header_length) && - (rxdesc.dev_flags & RXDONE_L2PAD)) - rt2x00queue_remove_l2pad(entry->skb, header_length); - - /* Trim buffer to correct size */ - skb_trim(entry->skb, rxdesc.size); - - /* - * Translate the signal to the correct bitrate index. - */ - rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc); - if (rxdesc.rate_mode == RATE_MODE_HT_MIX || - rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD) - rxdesc.flags |= RX_FLAG_HT; - - /* - * Check if this is a beacon, and more frames have been - * buffered while we were in powersaving mode. - */ - rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc); - - /* - * Check for incoming BlockAcks to match to the BlockAckReqs - * we've send out. - */ - rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc); - - /* - * Update extra components - */ - rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc); - rt2x00debug_update_crypto(rt2x00dev, &rxdesc); - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb); - - /* - * Initialize RX status information, and send frame - * to mac80211. - */ - rx_status = IEEE80211_SKB_RXCB(entry->skb); - - /* Ensure that all fields of rx_status are initialized - * properly. The skb->cb array was used for driver - * specific informations, so rx_status might contain - * garbage. - */ - memset(rx_status, 0, sizeof(*rx_status)); - - rx_status->mactime = rxdesc.timestamp; - rx_status->band = rt2x00dev->curr_band; - rx_status->freq = rt2x00dev->curr_freq; - rx_status->rate_idx = rate_idx; - rx_status->signal = rxdesc.rssi; - rx_status->flag = rxdesc.flags; - rx_status->antenna = rt2x00dev->link.ant.active.rx; - - ieee80211_rx_ni(rt2x00dev->hw, entry->skb); - -renew_skb: - /* - * Replace the skb with the freshly allocated one. - */ - entry->skb = skb; - -submit_entry: - entry->flags = 0; - rt2x00queue_index_inc(entry, Q_INDEX_DONE); - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && - test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00dev->ops->lib->clear_entry(entry); -} -EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); - -/* - * Driver initialization handlers. - */ -const struct rt2x00_rate rt2x00_supported_rates[12] = { - { - .flags = DEV_RATE_CCK, - .bitrate = 10, - .ratemask = BIT(0), - .plcp = 0x00, - .mcs = RATE_MCS(RATE_MODE_CCK, 0), - }, - { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, - .bitrate = 20, - .ratemask = BIT(1), - .plcp = 0x01, - .mcs = RATE_MCS(RATE_MODE_CCK, 1), - }, - { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, - .bitrate = 55, - .ratemask = BIT(2), - .plcp = 0x02, - .mcs = RATE_MCS(RATE_MODE_CCK, 2), - }, - { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, - .bitrate = 110, - .ratemask = BIT(3), - .plcp = 0x03, - .mcs = RATE_MCS(RATE_MODE_CCK, 3), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 60, - .ratemask = BIT(4), - .plcp = 0x0b, - .mcs = RATE_MCS(RATE_MODE_OFDM, 0), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 90, - .ratemask = BIT(5), - .plcp = 0x0f, - .mcs = RATE_MCS(RATE_MODE_OFDM, 1), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 120, - .ratemask = BIT(6), - .plcp = 0x0a, - .mcs = RATE_MCS(RATE_MODE_OFDM, 2), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 180, - .ratemask = BIT(7), - .plcp = 0x0e, - .mcs = RATE_MCS(RATE_MODE_OFDM, 3), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 240, - .ratemask = BIT(8), - .plcp = 0x09, - .mcs = RATE_MCS(RATE_MODE_OFDM, 4), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 360, - .ratemask = BIT(9), - .plcp = 0x0d, - .mcs = RATE_MCS(RATE_MODE_OFDM, 5), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 480, - .ratemask = BIT(10), - .plcp = 0x08, - .mcs = RATE_MCS(RATE_MODE_OFDM, 6), - }, - { - .flags = DEV_RATE_OFDM, - .bitrate = 540, - .ratemask = BIT(11), - .plcp = 0x0c, - .mcs = RATE_MCS(RATE_MODE_OFDM, 7), - }, -}; - -static void rt2x00lib_channel(struct ieee80211_channel *entry, - const int channel, const int tx_power, - const int value) -{ - /* XXX: this assumption about the band is wrong for 802.11j */ - entry->band = channel <= 14 ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - entry->center_freq = ieee80211_channel_to_frequency(channel, - entry->band); - entry->hw_value = value; - entry->max_power = tx_power; - entry->max_antenna_gain = 0xff; -} - -static void rt2x00lib_rate(struct ieee80211_rate *entry, - const u16 index, const struct rt2x00_rate *rate) -{ - entry->flags = 0; - entry->bitrate = rate->bitrate; - entry->hw_value = index; - entry->hw_value_short = index; - - if (rate->flags & DEV_RATE_SHORT_PREAMBLE) - entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE; -} - -static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, - struct hw_mode_spec *spec) -{ - struct ieee80211_hw *hw = rt2x00dev->hw; - struct ieee80211_channel *channels; - struct ieee80211_rate *rates; - unsigned int num_rates; - unsigned int i; - - num_rates = 0; - if (spec->supported_rates & SUPPORT_RATE_CCK) - num_rates += 4; - if (spec->supported_rates & SUPPORT_RATE_OFDM) - num_rates += 8; - - channels = kcalloc(spec->num_channels, sizeof(*channels), GFP_KERNEL); - if (!channels) - return -ENOMEM; - - rates = kcalloc(num_rates, sizeof(*rates), GFP_KERNEL); - if (!rates) - goto exit_free_channels; - - /* - * Initialize Rate list. - */ - for (i = 0; i < num_rates; i++) - rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i)); - - /* - * Initialize Channel list. - */ - for (i = 0; i < spec->num_channels; i++) { - rt2x00lib_channel(&channels[i], - spec->channels[i].channel, - spec->channels_info[i].max_power, i); - } - - /* - * Intitialize 802.11b, 802.11g - * Rates: CCK, OFDM. - * Channels: 2.4 GHz - */ - if (spec->supported_bands & SUPPORT_BAND_2GHZ) { - rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14; - rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates; - rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels; - rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates; - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &rt2x00dev->bands[IEEE80211_BAND_2GHZ]; - memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap, - &spec->ht, sizeof(spec->ht)); - } - - /* - * Intitialize 802.11a - * Rates: OFDM. - * Channels: OFDM, UNII, HiperLAN2. - */ - if (spec->supported_bands & SUPPORT_BAND_5GHZ) { - rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels = - spec->num_channels - 14; - rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates = - num_rates - 4; - rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14]; - rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4]; - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &rt2x00dev->bands[IEEE80211_BAND_5GHZ]; - memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap, - &spec->ht, sizeof(spec->ht)); - } - - return 0; - - exit_free_channels: - kfree(channels); - rt2x00_err(rt2x00dev, "Allocation ieee80211 modes failed\n"); - return -ENOMEM; -} - -static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) -{ - if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) - ieee80211_unregister_hw(rt2x00dev->hw); - - if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) { - kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels); - kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates); - rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL; - rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL; - } - - kfree(rt2x00dev->spec.channels_info); -} - -static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - int status; - - if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) - return 0; - - /* - * Initialize HW modes. - */ - status = rt2x00lib_probe_hw_modes(rt2x00dev, spec); - if (status) - return status; - - /* - * Initialize HW fields. - */ - rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues; - - /* - * Initialize extra TX headroom required. - */ - rt2x00dev->hw->extra_tx_headroom = - max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM, - rt2x00dev->extra_tx_headroom); - - /* - * Take TX headroom required for alignment into account. - */ - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) - rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE; - else if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) - rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE; - - /* - * Tell mac80211 about the size of our private STA structure. - */ - rt2x00dev->hw->sta_data_size = sizeof(struct rt2x00_sta); - - /* - * Allocate tx status FIFO for driver use. - */ - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TXSTATUS_FIFO)) { - /* - * Allocate the txstatus fifo. In the worst case the tx - * status fifo has to hold the tx status of all entries - * in all tx queues. Hence, calculate the kfifo size as - * tx_queues * entry_num and round up to the nearest - * power of 2. - */ - int kfifo_size = - roundup_pow_of_two(rt2x00dev->ops->tx_queues * - rt2x00dev->tx->limit * - sizeof(u32)); - - status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size, - GFP_KERNEL); - if (status) - return status; - } - - /* - * Initialize tasklets if used by the driver. Tasklets are - * disabled until the interrupts are turned on. The driver - * has to handle that. - */ -#define RT2X00_TASKLET_INIT(taskletname) \ - if (rt2x00dev->ops->lib->taskletname) { \ - tasklet_init(&rt2x00dev->taskletname, \ - rt2x00dev->ops->lib->taskletname, \ - (unsigned long)rt2x00dev); \ - } - - RT2X00_TASKLET_INIT(txstatus_tasklet); - RT2X00_TASKLET_INIT(pretbtt_tasklet); - RT2X00_TASKLET_INIT(tbtt_tasklet); - RT2X00_TASKLET_INIT(rxdone_tasklet); - RT2X00_TASKLET_INIT(autowake_tasklet); - -#undef RT2X00_TASKLET_INIT - - /* - * Register HW. - */ - status = ieee80211_register_hw(rt2x00dev->hw); - if (status) - return status; - - set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags); - - return 0; -} - -/* - * Initialization/uninitialization handlers. - */ -static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) - return; - - /* - * Stop rfkill polling. - */ - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) - rt2x00rfkill_unregister(rt2x00dev); - - /* - * Allow the HW to uninitialize. - */ - rt2x00dev->ops->lib->uninitialize(rt2x00dev); - - /* - * Free allocated queue entries. - */ - rt2x00queue_uninitialize(rt2x00dev); -} - -static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) -{ - int status; - - if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) - return 0; - - /* - * Allocate all queue entries. - */ - status = rt2x00queue_initialize(rt2x00dev); - if (status) - return status; - - /* - * Initialize the device. - */ - status = rt2x00dev->ops->lib->initialize(rt2x00dev); - if (status) { - rt2x00queue_uninitialize(rt2x00dev); - return status; - } - - set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags); - - /* - * Start rfkill polling. - */ - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) - rt2x00rfkill_register(rt2x00dev); - - return 0; -} - -int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) - return 0; - - /* - * If this is the first interface which is added, - * we should load the firmware now. - */ - retval = rt2x00lib_load_firmware(rt2x00dev); - if (retval) - return retval; - - /* - * Initialize the device. - */ - retval = rt2x00lib_initialize(rt2x00dev); - if (retval) - return retval; - - rt2x00dev->intf_ap_count = 0; - rt2x00dev->intf_sta_count = 0; - rt2x00dev->intf_associated = 0; - - /* Enable the radio */ - retval = rt2x00lib_enable_radio(rt2x00dev); - if (retval) - return retval; - - set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags); - - return 0; -} - -void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) -{ - if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) - return; - - /* - * Perhaps we can add something smarter here, - * but for now just disabling the radio should do. - */ - rt2x00lib_disable_radio(rt2x00dev); - - rt2x00dev->intf_ap_count = 0; - rt2x00dev->intf_sta_count = 0; - rt2x00dev->intf_associated = 0; -} - -static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev) -{ - struct ieee80211_iface_limit *if_limit; - struct ieee80211_iface_combination *if_combination; - - if (rt2x00dev->ops->max_ap_intf < 2) - return; - - /* - * Build up AP interface limits structure. - */ - if_limit = &rt2x00dev->if_limits_ap; - if_limit->max = rt2x00dev->ops->max_ap_intf; - if_limit->types = BIT(NL80211_IFTYPE_AP); -#ifdef CONFIG_MAC80211_MESH - if_limit->types |= BIT(NL80211_IFTYPE_MESH_POINT); -#endif - - /* - * Build up AP interface combinations structure. - */ - if_combination = &rt2x00dev->if_combinations[IF_COMB_AP]; - if_combination->limits = if_limit; - if_combination->n_limits = 1; - if_combination->max_interfaces = if_limit->max; - if_combination->num_different_channels = 1; - - /* - * Finally, specify the possible combinations to mac80211. - */ - rt2x00dev->hw->wiphy->iface_combinations = rt2x00dev->if_combinations; - rt2x00dev->hw->wiphy->n_iface_combinations = 1; -} - -static unsigned int rt2x00dev_extra_tx_headroom(struct rt2x00_dev *rt2x00dev) -{ - if (WARN_ON(!rt2x00dev->tx)) - return 0; - - if (rt2x00_is_usb(rt2x00dev)) - return rt2x00dev->tx[0].winfo_size + rt2x00dev->tx[0].desc_size; - - return rt2x00dev->tx[0].winfo_size; -} - -/* - * driver allocation handlers. - */ -int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) -{ - int retval = -ENOMEM; - - /* - * Set possible interface combinations. - */ - rt2x00lib_set_if_combinations(rt2x00dev); - - /* - * Allocate the driver data memory, if necessary. - */ - if (rt2x00dev->ops->drv_data_size > 0) { - rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size, - GFP_KERNEL); - if (!rt2x00dev->drv_data) { - retval = -ENOMEM; - goto exit; - } - } - - spin_lock_init(&rt2x00dev->irqmask_lock); - mutex_init(&rt2x00dev->csr_mutex); - INIT_LIST_HEAD(&rt2x00dev->bar_list); - spin_lock_init(&rt2x00dev->bar_list_lock); - - set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - - /* - * Make room for rt2x00_intf inside the per-interface - * structure ieee80211_vif. - */ - rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf); - - /* - * rt2x00 devices can only use the last n bits of the MAC address - * for virtual interfaces. - */ - rt2x00dev->hw->wiphy->addr_mask[ETH_ALEN - 1] = - (rt2x00dev->ops->max_ap_intf - 1); - - /* - * Initialize work. - */ - rt2x00dev->workqueue = - alloc_ordered_workqueue("%s", 0, wiphy_name(rt2x00dev->hw->wiphy)); - if (!rt2x00dev->workqueue) { - retval = -ENOMEM; - goto exit; - } - - INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); - INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup); - INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep); - - /* - * Let the driver probe the device to detect the capabilities. - */ - retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev); - if (retval) { - rt2x00_err(rt2x00dev, "Failed to allocate device\n"); - goto exit; - } - - /* - * Allocate queue array. - */ - retval = rt2x00queue_allocate(rt2x00dev); - if (retval) - goto exit; - - /* Cache TX headroom value */ - rt2x00dev->extra_tx_headroom = rt2x00dev_extra_tx_headroom(rt2x00dev); - - /* - * Determine which operating modes are supported, all modes - * which require beaconing, depend on the availability of - * beacon entries. - */ - rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - if (rt2x00dev->bcn->limit > 0) - rt2x00dev->hw->wiphy->interface_modes |= - BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_AP) | -#ifdef CONFIG_MAC80211_MESH - BIT(NL80211_IFTYPE_MESH_POINT) | -#endif - BIT(NL80211_IFTYPE_WDS); - - rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; - - /* - * Initialize ieee80211 structure. - */ - retval = rt2x00lib_probe_hw(rt2x00dev); - if (retval) { - rt2x00_err(rt2x00dev, "Failed to initialize hw\n"); - goto exit; - } - - /* - * Register extra components. - */ - rt2x00link_register(rt2x00dev); - rt2x00leds_register(rt2x00dev); - rt2x00debug_register(rt2x00dev); - - /* - * Start rfkill polling. - */ - if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) - rt2x00rfkill_register(rt2x00dev); - - return 0; - -exit: - rt2x00lib_remove_dev(rt2x00dev); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); - -void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) -{ - clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - - /* - * Stop rfkill polling. - */ - if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) - rt2x00rfkill_unregister(rt2x00dev); - - /* - * Disable radio. - */ - rt2x00lib_disable_radio(rt2x00dev); - - /* - * Stop all work. - */ - cancel_work_sync(&rt2x00dev->intf_work); - cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); - cancel_work_sync(&rt2x00dev->sleep_work); - if (rt2x00_is_usb(rt2x00dev)) { - hrtimer_cancel(&rt2x00dev->txstatus_timer); - cancel_work_sync(&rt2x00dev->rxdone_work); - cancel_work_sync(&rt2x00dev->txdone_work); - } - if (rt2x00dev->workqueue) - destroy_workqueue(rt2x00dev->workqueue); - - /* - * Free the tx status fifo. - */ - kfifo_free(&rt2x00dev->txstatus_fifo); - - /* - * Kill the tx status tasklet. - */ - tasklet_kill(&rt2x00dev->txstatus_tasklet); - tasklet_kill(&rt2x00dev->pretbtt_tasklet); - tasklet_kill(&rt2x00dev->tbtt_tasklet); - tasklet_kill(&rt2x00dev->rxdone_tasklet); - tasklet_kill(&rt2x00dev->autowake_tasklet); - - /* - * Uninitialize device. - */ - rt2x00lib_uninitialize(rt2x00dev); - - /* - * Free extra components - */ - rt2x00debug_deregister(rt2x00dev); - rt2x00leds_unregister(rt2x00dev); - - /* - * Free ieee80211_hw memory. - */ - rt2x00lib_remove_hw(rt2x00dev); - - /* - * Free firmware image. - */ - rt2x00lib_free_firmware(rt2x00dev); - - /* - * Free queue structures. - */ - rt2x00queue_free(rt2x00dev); - - /* - * Free the driver data. - */ - kfree(rt2x00dev->drv_data); -} -EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); - -/* - * Device state handlers - */ -#ifdef CONFIG_PM -int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) -{ - rt2x00_dbg(rt2x00dev, "Going to sleep\n"); - - /* - * Prevent mac80211 from accessing driver while suspended. - */ - if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - /* - * Cleanup as much as possible. - */ - rt2x00lib_uninitialize(rt2x00dev); - - /* - * Suspend/disable extra components. - */ - rt2x00leds_suspend(rt2x00dev); - rt2x00debug_deregister(rt2x00dev); - - /* - * Set device mode to sleep for power management, - * on some hardware this call seems to consistently fail. - * From the specifications it is hard to tell why it fails, - * and if this is a "bad thing". - * Overall it is safe to just ignore the failure and - * continue suspending. The only downside is that the - * device will not be in optimal power save mode, but with - * the radio and the other components already disabled the - * device is as good as disabled. - */ - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP)) - rt2x00_warn(rt2x00dev, "Device failed to enter sleep state, continue suspending\n"); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00lib_suspend); - -int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) -{ - rt2x00_dbg(rt2x00dev, "Waking up\n"); - - /* - * Restore/enable extra components. - */ - rt2x00debug_register(rt2x00dev); - rt2x00leds_resume(rt2x00dev); - - /* - * We are ready again to receive requests from mac80211. - */ - set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00lib_resume); -#endif /* CONFIG_PM */ - -/* - * rt2x00lib module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 library"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h deleted file mode 100644 index 4c0e01b5d515..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00dump.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00dump - Abstract: - Data structures for the rt2x00debug & userspace. - - The declarations in this file can be used by both rt2x00 - and userspace and therefore should be kept together in - this file. - */ - -#ifndef RT2X00DUMP_H -#define RT2X00DUMP_H - -/** - * DOC: Introduction - * - * This header is intended to be exported to userspace, - * to make the structures and enumerations available to userspace - * applications. This means that all data types should be exportable. - * - * When rt2x00 is compiled with debugfs support enabled, - * it is possible to capture all data coming in and out of the device - * by reading the frame dump file. This file can have only a single reader. - * The following frames will be reported: - * - All incoming frames (rx) - * - All outgoing frames (tx, including beacon and atim) - * - All completed frames (txdone including atim) - * - * The data is send to the file using the following format: - * - * [rt2x00dump header][hardware descriptor][ieee802.11 frame] - * - * rt2x00dump header: The description of the dumped frame, as well as - * additional information useful for debugging. See &rt2x00dump_hdr. - * hardware descriptor: Descriptor that was used to receive or transmit - * the frame. - * ieee802.11 frame: The actual frame that was received or transmitted. - */ - -/** - * enum rt2x00_dump_type - Frame type - * - * These values are used for the @type member of &rt2x00dump_hdr. - * @DUMP_FRAME_RXDONE: This frame has been received by the hardware. - * @DUMP_FRAME_TX: This frame is queued for transmission to the hardware. - * @DUMP_FRAME_TXDONE: This frame indicates the device has handled - * the tx event which has either succeeded or failed. A frame - * with this type should also have been reported with as a - * %DUMP_FRAME_TX frame. - * @DUMP_FRAME_BEACON: This beacon frame is queued for transmission to the - * hardware. - */ -enum rt2x00_dump_type { - DUMP_FRAME_RXDONE = 1, - DUMP_FRAME_TX = 2, - DUMP_FRAME_TXDONE = 3, - DUMP_FRAME_BEACON = 4, -}; - -/** - * struct rt2x00dump_hdr - Dump frame header - * - * Each frame dumped to the debugfs file starts with this header - * attached. This header contains the description of the actual - * frame which was dumped. - * - * New fields inside the structure must be appended to the end of - * the structure. This way userspace tools compiled for earlier - * header versions can still correctly handle the frame dump - * (although they will not handle all data passed to them in the dump). - * - * @version: Header version should always be set to %DUMP_HEADER_VERSION. - * This field must be checked by userspace to determine if it can - * handle this frame. - * @header_length: The length of the &rt2x00dump_hdr structure. This is - * used for compatibility reasons so userspace can easily determine - * the location of the next field in the dump. - * @desc_length: The length of the device descriptor. - * @data_length: The length of the frame data (including the ieee802.11 header. - * @chip_rt: RT chipset - * @chip_rf: RF chipset - * @chip_rev: Chipset revision - * @type: The frame type (&rt2x00_dump_type) - * @queue_index: The index number of the data queue. - * @entry_index: The index number of the entry inside the data queue. - * @timestamp_sec: Timestamp - seconds - * @timestamp_usec: Timestamp - microseconds - */ -struct rt2x00dump_hdr { - __le32 version; -#define DUMP_HEADER_VERSION 2 - - __le32 header_length; - __le32 desc_length; - __le32 data_length; - - __le16 chip_rt; - __le16 chip_rf; - __le16 chip_rev; - - __le16 type; - __u8 queue_index; - __u8 entry_index; - - __le32 timestamp_sec; - __le32 timestamp_usec; -}; - -#endif /* RT2X00DUMP_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c deleted file mode 100644 index 5813300f68a2..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 firmware loading routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) -{ - struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); - const struct firmware *fw; - char *fw_name; - int retval; - - /* - * Read correct firmware from harddisk. - */ - fw_name = rt2x00dev->ops->lib->get_firmware_name(rt2x00dev); - if (!fw_name) { - rt2x00_err(rt2x00dev, - "Invalid firmware filename\n" - "Please file bug report to %s\n", DRV_PROJECT); - return -EINVAL; - } - - rt2x00_info(rt2x00dev, "Loading firmware file '%s'\n", fw_name); - - retval = request_firmware(&fw, fw_name, device); - if (retval) { - rt2x00_err(rt2x00dev, "Failed to request Firmware\n"); - return retval; - } - - if (!fw || !fw->size || !fw->data) { - rt2x00_err(rt2x00dev, "Failed to read Firmware\n"); - release_firmware(fw); - return -ENOENT; - } - - rt2x00_info(rt2x00dev, "Firmware detected - version: %d.%d\n", - fw->data[fw->size - 4], fw->data[fw->size - 3]); - snprintf(rt2x00dev->hw->wiphy->fw_version, - sizeof(rt2x00dev->hw->wiphy->fw_version), "%d.%d", - fw->data[fw->size - 4], fw->data[fw->size - 3]); - - retval = rt2x00dev->ops->lib->check_firmware(rt2x00dev, fw->data, fw->size); - switch (retval) { - case FW_OK: - break; - case FW_BAD_CRC: - rt2x00_err(rt2x00dev, "Firmware checksum error\n"); - goto exit; - case FW_BAD_LENGTH: - rt2x00_err(rt2x00dev, "Invalid firmware file length (len=%zu)\n", - fw->size); - goto exit; - case FW_BAD_VERSION: - rt2x00_err(rt2x00dev, "Current firmware does not support detected chipset\n"); - goto exit; - } - - rt2x00dev->fw = fw; - - return 0; - -exit: - release_firmware(fw); - - return -ENOENT; -} - -int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_FIRMWARE)) - return 0; - - if (!rt2x00dev->fw) { - retval = rt2x00lib_request_firmware(rt2x00dev); - if (retval) - return retval; - } - - /* - * Send firmware to the device. - */ - retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev, - rt2x00dev->fw->data, - rt2x00dev->fw->size); - - /* - * When the firmware is uploaded to the hardware the LED - * association status might have been triggered, for correct - * LED handling it should now be reset. - */ - rt2x00leds_led_assoc(rt2x00dev, false); - - return retval; -} - -void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) -{ - release_firmware(rt2x00dev->fw); - rt2x00dev->fw = NULL; -} diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c deleted file mode 100644 index c681d04b506c..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 led specific routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi) -{ - struct rt2x00_led *led = &rt2x00dev->led_qual; - unsigned int brightness; - - if ((led->type != LED_TYPE_QUALITY) || !(led->flags & LED_REGISTERED)) - return; - - /* - * Led handling requires a positive value for the rssi, - * to do that correctly we need to add the correction. - */ - rssi += rt2x00dev->rssi_offset; - - /* - * Get the rssi level, this is used to convert the rssi - * to a LED value inside the range LED_OFF - LED_FULL. - */ - if (rssi <= 30) - rssi = 0; - else if (rssi <= 39) - rssi = 1; - else if (rssi <= 49) - rssi = 2; - else if (rssi <= 53) - rssi = 3; - else if (rssi <= 63) - rssi = 4; - else - rssi = 5; - - /* - * Note that we must _not_ send LED_OFF since the driver - * is going to calculate the value and might use it in a - * division. - */ - brightness = ((LED_FULL / 6) * rssi) + 1; - if (brightness != led->led_dev.brightness) { - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; - } -} - -static void rt2x00led_led_simple(struct rt2x00_led *led, bool enabled) -{ - unsigned int brightness = enabled ? LED_FULL : LED_OFF; - - if (!(led->flags & LED_REGISTERED)) - return; - - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; -} - -void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled) -{ - if (rt2x00dev->led_qual.type == LED_TYPE_ACTIVITY) - rt2x00led_led_simple(&rt2x00dev->led_qual, enabled); -} - -void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) -{ - if (rt2x00dev->led_assoc.type == LED_TYPE_ASSOC) - rt2x00led_led_simple(&rt2x00dev->led_assoc, enabled); -} - -void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled) -{ - if (rt2x00dev->led_radio.type == LED_TYPE_RADIO) - rt2x00led_led_simple(&rt2x00dev->led_radio, enabled); -} - -static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - const char *name) -{ - struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); - int retval; - - led->led_dev.name = name; - led->led_dev.brightness = LED_OFF; - - retval = led_classdev_register(device, &led->led_dev); - if (retval) { - rt2x00_err(rt2x00dev, "Failed to register led handler\n"); - return retval; - } - - led->flags |= LED_REGISTERED; - - return 0; -} - -void rt2x00leds_register(struct rt2x00_dev *rt2x00dev) -{ - char name[36]; - int retval; - unsigned long on_period; - unsigned long off_period; - const char *phy_name = wiphy_name(rt2x00dev->hw->wiphy); - - if (rt2x00dev->led_radio.flags & LED_INITIALIZED) { - snprintf(name, sizeof(name), "%s-%s::radio", - rt2x00dev->ops->name, phy_name); - - retval = rt2x00leds_register_led(rt2x00dev, - &rt2x00dev->led_radio, - name); - if (retval) - goto exit_fail; - } - - if (rt2x00dev->led_assoc.flags & LED_INITIALIZED) { - snprintf(name, sizeof(name), "%s-%s::assoc", - rt2x00dev->ops->name, phy_name); - - retval = rt2x00leds_register_led(rt2x00dev, - &rt2x00dev->led_assoc, - name); - if (retval) - goto exit_fail; - } - - if (rt2x00dev->led_qual.flags & LED_INITIALIZED) { - snprintf(name, sizeof(name), "%s-%s::quality", - rt2x00dev->ops->name, phy_name); - - retval = rt2x00leds_register_led(rt2x00dev, - &rt2x00dev->led_qual, - name); - if (retval) - goto exit_fail; - } - - /* - * Initialize blink time to default value: - * On period: 70ms - * Off period: 30ms - */ - if (rt2x00dev->led_radio.led_dev.blink_set) { - on_period = 70; - off_period = 30; - rt2x00dev->led_radio.led_dev.blink_set( - &rt2x00dev->led_radio.led_dev, &on_period, &off_period); - } - - return; - -exit_fail: - rt2x00leds_unregister(rt2x00dev); -} - -static void rt2x00leds_unregister_led(struct rt2x00_led *led) -{ - led_classdev_unregister(&led->led_dev); - - /* - * This might look weird, but when we are unregistering while - * suspended the led is already off, and since we haven't - * fully resumed yet, access to the device might not be - * possible yet. - */ - if (!(led->led_dev.flags & LED_SUSPENDED)) - led->led_dev.brightness_set(&led->led_dev, LED_OFF); - - led->flags &= ~LED_REGISTERED; -} - -void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->led_qual.flags & LED_REGISTERED) - rt2x00leds_unregister_led(&rt2x00dev->led_qual); - if (rt2x00dev->led_assoc.flags & LED_REGISTERED) - rt2x00leds_unregister_led(&rt2x00dev->led_assoc); - if (rt2x00dev->led_radio.flags & LED_REGISTERED) - rt2x00leds_unregister_led(&rt2x00dev->led_radio); -} - -static inline void rt2x00leds_suspend_led(struct rt2x00_led *led) -{ - led_classdev_suspend(&led->led_dev); - - /* This shouldn't be needed, but just to be safe */ - led->led_dev.brightness_set(&led->led_dev, LED_OFF); - led->led_dev.brightness = LED_OFF; -} - -void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->led_qual.flags & LED_REGISTERED) - rt2x00leds_suspend_led(&rt2x00dev->led_qual); - if (rt2x00dev->led_assoc.flags & LED_REGISTERED) - rt2x00leds_suspend_led(&rt2x00dev->led_assoc); - if (rt2x00dev->led_radio.flags & LED_REGISTERED) - rt2x00leds_suspend_led(&rt2x00dev->led_radio); -} - -static inline void rt2x00leds_resume_led(struct rt2x00_led *led) -{ - led_classdev_resume(&led->led_dev); - - /* Device might have enabled the LEDS during resume */ - led->led_dev.brightness_set(&led->led_dev, LED_OFF); - led->led_dev.brightness = LED_OFF; -} - -void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->led_radio.flags & LED_REGISTERED) - rt2x00leds_resume_led(&rt2x00dev->led_radio); - if (rt2x00dev->led_assoc.flags & LED_REGISTERED) - rt2x00leds_resume_led(&rt2x00dev->led_assoc); - if (rt2x00dev->led_qual.flags & LED_REGISTERED) - rt2x00leds_resume_led(&rt2x00dev->led_qual); -} diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h deleted file mode 100644 index b2c5269570da..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00leds.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 led datastructures and routines - */ - -#ifndef RT2X00LEDS_H -#define RT2X00LEDS_H - -enum led_type { - LED_TYPE_RADIO, - LED_TYPE_ASSOC, - LED_TYPE_ACTIVITY, - LED_TYPE_QUALITY, -}; - -struct rt2x00_led { - struct rt2x00_dev *rt2x00dev; - struct led_classdev led_dev; - - enum led_type type; - unsigned int flags; -#define LED_INITIALIZED ( 1 << 0 ) -#define LED_REGISTERED ( 1 << 1 ) -}; - -#endif /* RT2X00LEDS_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h deleted file mode 100644 index fb7c349ccc9c..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ /dev/null @@ -1,468 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: Data structures and definitions for the rt2x00lib module. - */ - -#ifndef RT2X00LIB_H -#define RT2X00LIB_H - -/* - * Interval defines - */ -#define WATCHDOG_INTERVAL round_jiffies_relative(HZ) -#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ) -#define AGC_INTERVAL round_jiffies_relative(4 * HZ) -#define VCO_INTERVAL round_jiffies_relative(10 * HZ) /* 10 sec */ - -/* - * rt2x00_rate: Per rate device information - */ -struct rt2x00_rate { - unsigned short flags; -#define DEV_RATE_CCK 0x0001 -#define DEV_RATE_OFDM 0x0002 -#define DEV_RATE_SHORT_PREAMBLE 0x0004 - - unsigned short bitrate; /* In 100kbit/s */ - unsigned short ratemask; - - unsigned short plcp; - unsigned short mcs; -}; - -extern const struct rt2x00_rate rt2x00_supported_rates[12]; - -static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value) -{ - return &rt2x00_supported_rates[hw_value & 0xff]; -} - -#define RATE_MCS(__mode, __mcs) \ - ((((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff)) - -static inline int rt2x00_get_rate_mcs(const u16 mcs_value) -{ - return (mcs_value & 0x00ff); -} - -/* - * Radio control handlers. - */ -int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev); - -/* - * Initialization handlers. - */ -int rt2x00lib_start(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev); - -/* - * Configuration handlers. - */ -void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - enum nl80211_iftype type, - const u8 *mac, const u8 *bssid); -void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct ieee80211_bss_conf *conf, - u32 changed); -void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, - struct antenna_setup ant); -void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - const unsigned int changed_flags); - -/** - * DOC: Queue handlers - */ - -/** - * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. - * @entry: The entry for which the skb will be applicable. - */ -struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp); - -/** - * rt2x00queue_free_skb - free a skb - * @entry: The entry for which the skb will be applicable. - */ -void rt2x00queue_free_skb(struct queue_entry *entry); - -/** - * rt2x00queue_align_frame - Align 802.11 frame to 4-byte boundary - * @skb: The skb to align - * - * Align the start of the 802.11 frame to a 4-byte boundary, this could - * mean the payload is not aligned properly though. - */ -void rt2x00queue_align_frame(struct sk_buff *skb); - -/** - * rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary - * @skb: The skb to align - * @header_length: Length of 802.11 header - * - * Apply L2 padding to align both header and payload to 4-byte boundary - */ -void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length); - -/** - * rt2x00queue_insert_l2pad - Remove L2 padding from 802.11 frame - * @skb: The skb to align - * @header_length: Length of 802.11 header - * - * Remove L2 padding used to align both header and payload to 4-byte boundary, - * by removing the L2 padding the header will no longer be 4-byte aligned. - */ -void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length); - -/** - * rt2x00queue_write_tx_frame - Write TX frame to hardware - * @queue: Queue over which the frame should be send - * @skb: The skb to send - * @local: frame is not from mac80211 - */ -int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, - struct ieee80211_sta *sta, bool local); - -/** - * rt2x00queue_update_beacon - Send new beacon from mac80211 - * to hardware. Handles locking by itself (mutex). - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @vif: Interface for which the beacon should be updated. - */ -int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif); - -/** - * rt2x00queue_update_beacon_locked - Send new beacon from mac80211 - * to hardware. Caller needs to ensure locking. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @vif: Interface for which the beacon should be updated. - */ -int rt2x00queue_update_beacon_locked(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif); - -/** - * rt2x00queue_clear_beacon - Clear beacon in hardware - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @vif: Interface for which the beacon should be updated. - */ -int rt2x00queue_clear_beacon(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif); - -/** - * rt2x00queue_index_inc - Index incrementation function - * @entry: Queue entry (&struct queue_entry) to perform the action on. - * @index: Index type (&enum queue_index) to perform the action on. - * - * This function will increase the requested index on the entry's queue, - * it will grab the appropriate locks and handle queue overflow events by - * resetting the index to the start of the queue. - */ -void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index); - -/** - * rt2x00queue_init_queues - Initialize all data queues - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * This function will loop through all available queues to clear all - * index numbers and set the queue entry to the correct initialization - * state. - */ -void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev); - -int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev); -int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev); -void rt2x00queue_free(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_update_stats - Update link statistics from RX frame - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: Received frame - * @rxdesc: Received frame descriptor - * - * Update link statistics based on the information from the - * received frame descriptor. - */ -void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct rxdone_entry_desc *rxdesc); - -/** - * rt2x00link_start_tuner - Start periodic link tuner work - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * This start the link tuner periodic work, this work will - * be executed periodically until &rt2x00link_stop_tuner has - * been called. - */ -void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_stop_tuner - Stop periodic link tuner work - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * After this function completed the link tuner will not - * be running until &rt2x00link_start_tuner is called. - */ -void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_reset_tuner - Reset periodic link tuner work - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @antenna: Should the antenna tuning also be reset - * - * The VGC limit configured in the hardware will be reset to 0 - * which forces the driver to rediscover the correct value for - * the current association. This is needed when configuration - * options have changed which could drastically change the - * SNR level or link quality (i.e. changing the antenna setting). - * - * Resetting the link tuner will also cause the periodic work counter - * to be reset. Any driver which has a fixed limit on the number - * of rounds the link tuner is supposed to work will accept the - * tuner actions again if this limit was previously reached. - * - * If @antenna is set to true a the software antenna diversity - * tuning will also be reset. - */ -void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna); - -/** - * rt2x00link_start_watchdog - Start periodic watchdog monitoring - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * This start the watchdog periodic work, this work will - *be executed periodically until &rt2x00link_stop_watchdog has - * been called. - */ -void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_stop_watchdog - Stop periodic watchdog monitoring - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * After this function completed the watchdog monitoring will not - * be running until &rt2x00link_start_watchdog is called. - */ -void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_start_agc - Start periodic gain calibration - * @rt2x00dev: Pointer to &struct rt2x00_dev. - */ -void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_start_vcocal - Start periodic VCO calibration - * @rt2x00dev: Pointer to &struct rt2x00_dev. - */ -void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_stop_agc - Stop periodic gain calibration - * @rt2x00dev: Pointer to &struct rt2x00_dev. - */ -void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_stop_vcocal - Stop periodic VCO calibration - * @rt2x00dev: Pointer to &struct rt2x00_dev. - */ -void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00link_register - Initialize link tuning & watchdog functionality - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * - * Initialize work structure and all link tuning and watchdog related - * parameters. This will not start the periodic work itself. - */ -void rt2x00link_register(struct rt2x00_dev *rt2x00dev); - -/* - * Firmware handlers. - */ -#ifdef CONFIG_RT2X00_LIB_FIRMWARE -int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev); -#else -static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} -static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) -{ -} -#endif /* CONFIG_RT2X00_LIB_FIRMWARE */ - -/* - * Debugfs handlers. - */ -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -void rt2x00debug_register(struct rt2x00_dev *rt2x00dev); -void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); -void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, - struct rxdone_entry_desc *rxdesc); -#else -static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, - struct rxdone_entry_desc *rxdesc) -{ -} -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -/* - * Crypto handlers. - */ -#ifdef CONFIG_RT2X00_LIB_CRYPTO -enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key); -void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc); -unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb); -void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, - struct txentry_desc *txdesc); -void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, - struct txentry_desc *txdesc); -void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length); -void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, - unsigned int header_length, - struct rxdone_entry_desc *rxdesc); -#else -static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) -{ - return CIPHER_NONE; -} - -static inline void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) -{ -} - -static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) -{ - return 0; -} - -static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, - struct txentry_desc *txdesc) -{ -} - -static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, - struct txentry_desc *txdesc) -{ -} - -static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, - unsigned int header_length) -{ -} - -static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, - unsigned int header_length, - struct rxdone_entry_desc *rxdesc) -{ -} -#endif /* CONFIG_RT2X00_LIB_CRYPTO */ - -/* - * RFkill handlers. - */ -static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) -{ - if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags)) - wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy); -} - -static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) -{ - if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags)) - wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy); -} - -/* - * LED handlers - */ -#ifdef CONFIG_RT2X00_LIB_LEDS -void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi); -void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled); -void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled); -void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled); -void rt2x00leds_register(struct rt2x00_dev *rt2x00dev); -void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev); -void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev); -void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev); -#else -static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, - int rssi) -{ -} - -static inline void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, - bool enabled) -{ -} - -static inline void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, - bool enabled) -{ -} - -static inline void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, - bool enabled) -{ -} - -static inline void rt2x00leds_register(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev) -{ -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -#endif /* RT2X00LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c deleted file mode 100644 index 017188e5a736..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ /dev/null @@ -1,492 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 generic link tuning routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -/* - * When we lack RSSI information return something less then -80 to - * tell the driver to tune the device to maximum sensitivity. - */ -#define DEFAULT_RSSI -128 - -static inline int rt2x00link_get_avg_rssi(struct ewma_rssi *ewma) -{ - unsigned long avg; - - avg = ewma_rssi_read(ewma); - if (avg) - return -avg; - - return DEFAULT_RSSI; -} - -static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev) -{ - struct link_ant *ant = &rt2x00dev->link.ant; - - if (rt2x00dev->link.qual.rx_success) - return rt2x00link_get_avg_rssi(&ant->rssi_ant); - - return DEFAULT_RSSI; -} - -static int rt2x00link_antenna_get_rssi_history(struct rt2x00_dev *rt2x00dev) -{ - struct link_ant *ant = &rt2x00dev->link.ant; - - if (ant->rssi_history) - return ant->rssi_history; - return DEFAULT_RSSI; -} - -static void rt2x00link_antenna_update_rssi_history(struct rt2x00_dev *rt2x00dev, - int rssi) -{ - struct link_ant *ant = &rt2x00dev->link.ant; - ant->rssi_history = rssi; -} - -static void rt2x00link_antenna_reset(struct rt2x00_dev *rt2x00dev) -{ - ewma_rssi_init(&rt2x00dev->link.ant.rssi_ant); -} - -static void rt2x00lib_antenna_diversity_sample(struct rt2x00_dev *rt2x00dev) -{ - struct link_ant *ant = &rt2x00dev->link.ant; - struct antenna_setup new_ant; - int other_antenna; - - int sample_current = rt2x00link_antenna_get_link_rssi(rt2x00dev); - int sample_other = rt2x00link_antenna_get_rssi_history(rt2x00dev); - - memcpy(&new_ant, &ant->active, sizeof(new_ant)); - - /* - * We are done sampling. Now we should evaluate the results. - */ - ant->flags &= ~ANTENNA_MODE_SAMPLE; - - /* - * During the last period we have sampled the RSSI - * from both antennas. It now is time to determine - * which antenna demonstrated the best performance. - * When we are already on the antenna with the best - * performance, just create a good starting point - * for the history and we are done. - */ - if (sample_current >= sample_other) { - rt2x00link_antenna_update_rssi_history(rt2x00dev, - sample_current); - return; - } - - other_antenna = (ant->active.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; - - if (ant->flags & ANTENNA_RX_DIVERSITY) - new_ant.rx = other_antenna; - - if (ant->flags & ANTENNA_TX_DIVERSITY) - new_ant.tx = other_antenna; - - rt2x00lib_config_antenna(rt2x00dev, new_ant); -} - -static void rt2x00lib_antenna_diversity_eval(struct rt2x00_dev *rt2x00dev) -{ - struct link_ant *ant = &rt2x00dev->link.ant; - struct antenna_setup new_ant; - int rssi_curr; - int rssi_old; - - memcpy(&new_ant, &ant->active, sizeof(new_ant)); - - /* - * Get current RSSI value along with the historical value, - * after that update the history with the current value. - */ - rssi_curr = rt2x00link_antenna_get_link_rssi(rt2x00dev); - rssi_old = rt2x00link_antenna_get_rssi_history(rt2x00dev); - rt2x00link_antenna_update_rssi_history(rt2x00dev, rssi_curr); - - /* - * Legacy driver indicates that we should swap antenna's - * when the difference in RSSI is greater that 5. This - * also should be done when the RSSI was actually better - * then the previous sample. - * When the difference exceeds the threshold we should - * sample the rssi from the other antenna to make a valid - * comparison between the 2 antennas. - */ - if (abs(rssi_curr - rssi_old) < 5) - return; - - ant->flags |= ANTENNA_MODE_SAMPLE; - - if (ant->flags & ANTENNA_RX_DIVERSITY) - new_ant.rx = (new_ant.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; - - if (ant->flags & ANTENNA_TX_DIVERSITY) - new_ant.tx = (new_ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; - - rt2x00lib_config_antenna(rt2x00dev, new_ant); -} - -static bool rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev) -{ - struct link_ant *ant = &rt2x00dev->link.ant; - - /* - * Determine if software diversity is enabled for - * either the TX or RX antenna (or both). - */ - if (!(ant->flags & ANTENNA_RX_DIVERSITY) && - !(ant->flags & ANTENNA_TX_DIVERSITY)) { - ant->flags = 0; - return true; - } - - /* - * If we have only sampled the data over the last period - * we should now harvest the data. Otherwise just evaluate - * the data. The latter should only be performed once - * every 2 seconds. - */ - if (ant->flags & ANTENNA_MODE_SAMPLE) { - rt2x00lib_antenna_diversity_sample(rt2x00dev); - return true; - } else if (rt2x00dev->link.count & 1) { - rt2x00lib_antenna_diversity_eval(rt2x00dev); - return true; - } - - return false; -} - -void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct rxdone_entry_desc *rxdesc) -{ - struct link *link = &rt2x00dev->link; - struct link_qual *qual = &rt2x00dev->link.qual; - struct link_ant *ant = &rt2x00dev->link.ant; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - - /* - * No need to update the stats for !=STA interfaces - */ - if (!rt2x00dev->intf_sta_count) - return; - - /* - * Frame was received successfully since non-succesfull - * frames would have been dropped by the hardware. - */ - qual->rx_success++; - - /* - * We are only interested in quality statistics from - * beacons which came from the BSS which we are - * associated with. - */ - if (!ieee80211_is_beacon(hdr->frame_control) || - !(rxdesc->dev_flags & RXDONE_MY_BSS)) - return; - - /* - * Update global RSSI - */ - ewma_rssi_add(&link->avg_rssi, -rxdesc->rssi); - - /* - * Update antenna RSSI - */ - ewma_rssi_add(&ant->rssi_ant, -rxdesc->rssi); -} - -void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) -{ - struct link *link = &rt2x00dev->link; - - /* - * Link tuning should only be performed when - * an active sta interface exists. AP interfaces - * don't need link tuning and monitor mode interfaces - * should never have to work with link tuners. - */ - if (!rt2x00dev->intf_sta_count) - return; - - /** - * While scanning, link tuning is disabled. By default - * the most sensitive settings will be used to make sure - * that all beacons and probe responses will be received - * during the scan. - */ - if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) - return; - - rt2x00link_reset_tuner(rt2x00dev, false); - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); -} - -void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) -{ - cancel_delayed_work_sync(&rt2x00dev->link.work); -} - -void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna) -{ - struct link_qual *qual = &rt2x00dev->link.qual; - u8 vgc_level = qual->vgc_level_reg; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* - * Reset link information. - * Both the currently active vgc level as well as - * the link tuner counter should be reset. Resetting - * the counter is important for devices where the - * device should only perform link tuning during the - * first minute after being enabled. - */ - rt2x00dev->link.count = 0; - memset(qual, 0, sizeof(*qual)); - ewma_rssi_init(&rt2x00dev->link.avg_rssi); - - /* - * Restore the VGC level as stored in the registers, - * the driver can use this to determine if the register - * must be updated during reset or not. - */ - qual->vgc_level_reg = vgc_level; - - /* - * Reset the link tuner. - */ - rt2x00dev->ops->lib->reset_tuner(rt2x00dev, qual); - - if (antenna) - rt2x00link_antenna_reset(rt2x00dev); -} - -static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev) -{ - struct link_qual *qual = &rt2x00dev->link.qual; - - qual->rx_success = 0; - qual->rx_failed = 0; - qual->tx_success = 0; - qual->tx_failed = 0; -} - -static void rt2x00link_tuner(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, link.work.work); - struct link *link = &rt2x00dev->link; - struct link_qual *qual = &rt2x00dev->link.qual; - - /* - * When the radio is shutting down we should - * immediately cease all link tuning. - */ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || - test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) - return; - - /* - * Update statistics. - */ - rt2x00dev->ops->lib->link_stats(rt2x00dev, qual); - rt2x00dev->low_level_stats.dot11FCSErrorCount += qual->rx_failed; - - /* - * Update quality RSSI for link tuning, - * when we have received some frames and we managed to - * collect the RSSI data we could use this. Otherwise we - * must fallback to the default RSSI value. - */ - if (!qual->rx_success) - qual->rssi = DEFAULT_RSSI; - else - qual->rssi = rt2x00link_get_avg_rssi(&link->avg_rssi); - - /* - * Check if link tuning is supported by the hardware, some hardware - * do not support link tuning at all, while other devices can disable - * the feature from the EEPROM. - */ - if (rt2x00_has_cap_link_tuning(rt2x00dev)) - rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count); - - /* - * Send a signal to the led to update the led signal strength. - */ - rt2x00leds_led_quality(rt2x00dev, qual->rssi); - - /* - * Evaluate antenna setup, make this the last step when - * rt2x00lib_antenna_diversity made changes the quality - * statistics will be reset. - */ - if (rt2x00lib_antenna_diversity(rt2x00dev)) - rt2x00link_reset_qual(rt2x00dev); - - /* - * Increase tuner counter, and reschedule the next link tuner run. - */ - link->count++; - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); -} - -void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev) -{ - struct link *link = &rt2x00dev->link; - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && - rt2x00dev->ops->lib->watchdog) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->watchdog_work, - WATCHDOG_INTERVAL); -} - -void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev) -{ - cancel_delayed_work_sync(&rt2x00dev->link.watchdog_work); -} - -static void rt2x00link_watchdog(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, link.watchdog_work.work); - struct link *link = &rt2x00dev->link; - - /* - * When the radio is shutting down we should - * immediately cease the watchdog monitoring. - */ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - rt2x00dev->ops->lib->watchdog(rt2x00dev); - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->watchdog_work, - WATCHDOG_INTERVAL); -} - -void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev) -{ - struct link *link = &rt2x00dev->link; - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && - rt2x00dev->ops->lib->gain_calibration) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->agc_work, - AGC_INTERVAL); -} - -void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev) -{ - struct link *link = &rt2x00dev->link; - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && - rt2x00dev->ops->lib->vco_calibration) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->vco_work, - VCO_INTERVAL); -} - -void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev) -{ - cancel_delayed_work_sync(&rt2x00dev->link.agc_work); -} - -void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev) -{ - cancel_delayed_work_sync(&rt2x00dev->link.vco_work); -} - -static void rt2x00link_agc(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, link.agc_work.work); - struct link *link = &rt2x00dev->link; - - /* - * When the radio is shutting down we should - * immediately cease the watchdog monitoring. - */ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - rt2x00dev->ops->lib->gain_calibration(rt2x00dev); - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->agc_work, - AGC_INTERVAL); -} - -static void rt2x00link_vcocal(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, link.vco_work.work); - struct link *link = &rt2x00dev->link; - - /* - * When the radio is shutting down we should - * immediately cease the VCO calibration. - */ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - rt2x00dev->ops->lib->vco_calibration(rt2x00dev); - - if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->vco_work, - VCO_INTERVAL); -} - -void rt2x00link_register(struct rt2x00_dev *rt2x00dev) -{ - INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc); - if (rt2x00_has_cap_vco_recalibration(rt2x00dev)) - INIT_DELAYED_WORK(&rt2x00dev->link.vco_work, rt2x00link_vcocal); - INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog); - INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner); -} diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c deleted file mode 100644 index 3c26ee65a415..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ /dev/null @@ -1,846 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00mac - Abstract: rt2x00 generic mac80211 routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue, - struct sk_buff *frag_skb) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb); - struct ieee80211_tx_info *rts_info; - struct sk_buff *skb; - unsigned int data_length; - int retval = 0; - - if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) - data_length = sizeof(struct ieee80211_cts); - else - data_length = sizeof(struct ieee80211_rts); - - skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom); - if (unlikely(!skb)) { - rt2x00_warn(rt2x00dev, "Failed to create RTS/CTS frame\n"); - return -ENOMEM; - } - - skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); - skb_put(skb, data_length); - - /* - * Copy TX information over from original frame to - * RTS/CTS frame. Note that we set the no encryption flag - * since we don't want this frame to be encrypted. - * RTS frames should be acked, while CTS-to-self frames - * should not. The ready for TX flag is cleared to prevent - * it being automatically send when the descriptor is - * written to the hardware. - */ - memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); - rts_info = IEEE80211_SKB_CB(skb); - rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS; - rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT; - - if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) - rts_info->flags |= IEEE80211_TX_CTL_NO_ACK; - else - rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; - - /* Disable hardware encryption */ - rts_info->control.hw_key = NULL; - - /* - * RTS/CTS frame should use the length of the frame plus any - * encryption overhead that will be added by the hardware. - */ - data_length += rt2x00crypto_tx_overhead(rt2x00dev, skb); - - if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) - ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, data_length, tx_info, - (struct ieee80211_cts *)(skb->data)); - else - ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, data_length, tx_info, - (struct ieee80211_rts *)(skb->data)); - - retval = rt2x00queue_write_tx_frame(queue, skb, NULL, true); - if (retval) { - dev_kfree_skb_any(skb); - rt2x00_warn(rt2x00dev, "Failed to send RTS/CTS frame\n"); - } - - return retval; -} - -void rt2x00mac_tx(struct ieee80211_hw *hw, - struct ieee80211_tx_control *control, - struct sk_buff *skb) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - enum data_queue_qid qid = skb_get_queue_mapping(skb); - struct data_queue *queue = NULL; - - /* - * Mac80211 might be calling this function while we are trying - * to remove the device or perhaps suspending it. - * Note that we can only stop the TX queues inside the TX path - * due to possible race conditions in mac80211. - */ - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - goto exit_free_skb; - - /* - * Use the ATIM queue if appropriate and present. - */ - if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM && - rt2x00_has_cap_flag(rt2x00dev, REQUIRE_ATIM_QUEUE)) - qid = QID_ATIM; - - queue = rt2x00queue_get_tx_queue(rt2x00dev, qid); - if (unlikely(!queue)) { - rt2x00_err(rt2x00dev, - "Attempt to send packet over invalid queue %d\n" - "Please file bug report to %s\n", qid, DRV_PROJECT); - goto exit_free_skb; - } - - /* - * If CTS/RTS is required. create and queue that frame first. - * Make sure we have at least enough entries available to send - * this CTS/RTS frame as well as the data frame. - * Note that when the driver has set the set_rts_threshold() - * callback function it doesn't need software generation of - * either RTS or CTS-to-self frame and handles everything - * inside the hardware. - */ - if (!rt2x00dev->ops->hw->set_rts_threshold && - (tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | - IEEE80211_TX_RC_USE_CTS_PROTECT))) { - if (rt2x00queue_available(queue) <= 1) - goto exit_fail; - - if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) - goto exit_fail; - } - - if (unlikely(rt2x00queue_write_tx_frame(queue, skb, control->sta, false))) - goto exit_fail; - - /* - * Pausing queue has to be serialized with rt2x00lib_txdone(). Note - * we should not use spin_lock_bh variant as bottom halve was already - * disabled before ieee80211_xmit() call. - */ - spin_lock(&queue->tx_lock); - if (rt2x00queue_threshold(queue)) - rt2x00queue_pause_queue(queue); - spin_unlock(&queue->tx_lock); - - return; - - exit_fail: - spin_lock(&queue->tx_lock); - rt2x00queue_pause_queue(queue); - spin_unlock(&queue->tx_lock); - exit_free_skb: - ieee80211_free_txskb(hw, skb); -} -EXPORT_SYMBOL_GPL(rt2x00mac_tx); - -int rt2x00mac_start(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - return rt2x00lib_start(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00mac_start); - -void rt2x00mac_stop(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return; - - rt2x00lib_stop(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00mac_stop); - -int rt2x00mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(vif); - struct data_queue *queue = rt2x00dev->bcn; - struct queue_entry *entry = NULL; - unsigned int i; - - /* - * Don't allow interfaces to be added - * the device has disappeared. - */ - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || - !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) - return -ENODEV; - - /* - * Loop through all beacon queues to find a free - * entry. Since there are as much beacon entries - * as the maximum interfaces, this search shouldn't - * fail. - */ - for (i = 0; i < queue->limit; i++) { - entry = &queue->entries[i]; - if (!test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags)) - break; - } - - if (unlikely(i == queue->limit)) - return -ENOBUFS; - - /* - * We are now absolutely sure the interface can be created, - * increase interface count and start initialization. - */ - - if (vif->type == NL80211_IFTYPE_AP) - rt2x00dev->intf_ap_count++; - else - rt2x00dev->intf_sta_count++; - - mutex_init(&intf->beacon_skb_mutex); - intf->beacon = entry; - - /* - * The MAC address must be configured after the device - * has been initialized. Otherwise the device can reset - * the MAC registers. - * The BSSID address must only be configured in AP mode, - * however we should not send an empty BSSID address for - * STA interfaces at this time, since this can cause - * invalid behavior in the device. - */ - rt2x00lib_config_intf(rt2x00dev, intf, vif->type, - vif->addr, NULL); - - /* - * Some filters depend on the current working mode. We can force - * an update during the next configure_filter() run by mac80211 by - * resetting the current packet_filter state. - */ - rt2x00dev->packet_filter = 0; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_add_interface); - -void rt2x00mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(vif); - - /* - * Don't allow interfaces to be remove while - * either the device has disappeared or when - * no interface is present. - */ - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || - (vif->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) || - (vif->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count)) - return; - - if (vif->type == NL80211_IFTYPE_AP) - rt2x00dev->intf_ap_count--; - else - rt2x00dev->intf_sta_count--; - - /* - * Release beacon entry so it is available for - * new interfaces again. - */ - clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags); - - /* - * Make sure the bssid and mac address registers - * are cleared to prevent false ACKing of frames. - */ - rt2x00lib_config_intf(rt2x00dev, intf, - NL80211_IFTYPE_UNSPECIFIED, NULL, NULL); -} -EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); - -int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct ieee80211_conf *conf = &hw->conf; - - /* - * mac80211 might be calling this function while we are trying - * to remove the device or perhaps suspending it. - */ - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - /* - * Some configuration parameters (e.g. channel and antenna values) can - * only be set when the radio is enabled, but do require the RX to - * be off. During this period we should keep link tuning enabled, - * if for any reason the link tuner must be reset, this will be - * handled by rt2x00lib_config(). - */ - rt2x00queue_stop_queue(rt2x00dev->rx); - - /* - * When we've just turned on the radio, we want to reprogram - * everything to ensure a consistent state - */ - rt2x00lib_config(rt2x00dev, conf, changed); - - /* - * After the radio has been enabled we need to configure - * the antenna to the default settings. rt2x00lib_config_antenna() - * should determine if any action should be taken based on - * checking if diversity has been enabled or no antenna changes - * have been made since the last configuration change. - */ - rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant); - - /* Turn RX back on */ - rt2x00queue_start_queue(rt2x00dev->rx); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_config); - -void rt2x00mac_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Mask off any flags we are going to ignore - * from the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_PSPOLL | - FIF_OTHER_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Multicast filter seems to kill broadcast traffic so never use it. - */ - *total_flags |= FIF_ALLMULTI; - - /* - * If the device has a single filter for all control frames, - * FIF_CONTROL and FIF_PSPOLL flags imply each other. - * And if the device has more than one filter for control frames - * of different types, but has no a separate filter for PS Poll frames, - * FIF_CONTROL flag implies FIF_PSPOLL. - */ - if (!rt2x00_has_cap_control_filters(rt2x00dev)) { - if (*total_flags & FIF_CONTROL || *total_flags & FIF_PSPOLL) - *total_flags |= FIF_CONTROL | FIF_PSPOLL; - } - if (!rt2x00_has_cap_control_filter_pspoll(rt2x00dev)) { - if (*total_flags & FIF_CONTROL) - *total_flags |= FIF_PSPOLL; - } - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); -} -EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); - -static void rt2x00mac_set_tim_iter(void *data, u8 *mac, - struct ieee80211_vif *vif) -{ - struct rt2x00_intf *intf = vif_to_intf(vif); - - if (vif->type != NL80211_IFTYPE_AP && - vif->type != NL80211_IFTYPE_ADHOC && - vif->type != NL80211_IFTYPE_MESH_POINT && - vif->type != NL80211_IFTYPE_WDS) - return; - - set_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags); -} - -int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, - bool set) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return 0; - - ieee80211_iterate_active_interfaces_atomic( - rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL, - rt2x00mac_set_tim_iter, rt2x00dev); - - /* queue work to upodate the beacon template */ - ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work); - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_set_tim); - -#ifdef CONFIG_RT2X00_LIB_CRYPTO -static void memcpy_tkip(struct rt2x00lib_crypto *crypto, u8 *key, u8 key_len) -{ - if (key_len > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) - memcpy(crypto->key, - &key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], - sizeof(crypto->key)); - - if (key_len > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) - memcpy(crypto->tx_mic, - &key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], - sizeof(crypto->tx_mic)); - - if (key_len > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) - memcpy(crypto->rx_mic, - &key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], - sizeof(crypto->rx_mic)); -} - -int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - int (*set_key) (struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key); - struct rt2x00lib_crypto crypto; - static const u8 bcast_addr[ETH_ALEN] = - { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, }; - struct rt2x00_sta *sta_priv = NULL; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - if (!rt2x00_has_cap_hw_crypto(rt2x00dev)) - return -EOPNOTSUPP; - - /* - * To support IBSS RSN, don't program group keys in IBSS, the - * hardware will then not attempt to decrypt the frames. - */ - if (vif->type == NL80211_IFTYPE_ADHOC && - !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) - return -EOPNOTSUPP; - - if (key->keylen > 32) - return -ENOSPC; - - memset(&crypto, 0, sizeof(crypto)); - - crypto.bssidx = rt2x00lib_get_bssidx(rt2x00dev, vif); - crypto.cipher = rt2x00crypto_key_to_cipher(key); - if (crypto.cipher == CIPHER_NONE) - return -EOPNOTSUPP; - if (crypto.cipher == CIPHER_TKIP && rt2x00_is_usb(rt2x00dev)) - return -EOPNOTSUPP; - - crypto.cmd = cmd; - - if (sta) { - crypto.address = sta->addr; - sta_priv = sta_to_rt2x00_sta(sta); - crypto.wcid = sta_priv->wcid; - } else - crypto.address = bcast_addr; - - if (crypto.cipher == CIPHER_TKIP) - memcpy_tkip(&crypto, &key->key[0], key->keylen); - else - memcpy(crypto.key, &key->key[0], key->keylen); - /* - * Each BSS has a maximum of 4 shared keys. - * Shared key index values: - * 0) BSS0 key0 - * 1) BSS0 key1 - * ... - * 4) BSS1 key0 - * ... - * 8) BSS2 key0 - * ... - * Both pairwise as shared key indeces are determined by - * driver. This is required because the hardware requires - * keys to be assigned in correct order (When key 1 is - * provided but key 0 is not, then the key is not found - * by the hardware during RX). - */ - if (cmd == SET_KEY) - key->hw_key_idx = 0; - - if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) - set_key = rt2x00dev->ops->lib->config_pairwise_key; - else - set_key = rt2x00dev->ops->lib->config_shared_key; - - if (!set_key) - return -EOPNOTSUPP; - - return set_key(rt2x00dev, &crypto, key); -} -EXPORT_SYMBOL_GPL(rt2x00mac_set_key); -#endif /* CONFIG_RT2X00_LIB_CRYPTO */ - -int rt2x00mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - return rt2x00dev->ops->lib->sta_add(rt2x00dev, vif, sta); -} -EXPORT_SYMBOL_GPL(rt2x00mac_sta_add); - -int rt2x00mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta); - - return rt2x00dev->ops->lib->sta_remove(rt2x00dev, sta_priv->wcid); -} -EXPORT_SYMBOL_GPL(rt2x00mac_sta_remove); - -void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - const u8 *mac_addr) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - set_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags); - rt2x00link_stop_tuner(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_start); - -void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - clear_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags); - rt2x00link_start_tuner(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_complete); - -int rt2x00mac_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * The dot11ACKFailureCount, dot11RTSFailureCount and - * dot11RTSSuccessCount are updated in interrupt time. - * dot11FCSErrorCount is updated in the link tuner. - */ - memcpy(stats, &rt2x00dev->low_level_stats, sizeof(*stats)); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_get_stats); - -void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(vif); - - /* - * mac80211 might be calling this function while we are trying - * to remove the device or perhaps suspending it. - */ - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return; - - /* - * Update the BSSID. - */ - if (changes & BSS_CHANGED_BSSID) - rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL, - bss_conf->bssid); - - /* - * Start/stop beaconing. - */ - if (changes & BSS_CHANGED_BEACON_ENABLED) { - mutex_lock(&intf->beacon_skb_mutex); - if (!bss_conf->enable_beacon && intf->enable_beacon) { - rt2x00dev->intf_beaconing--; - intf->enable_beacon = false; - - if (rt2x00dev->intf_beaconing == 0) { - /* - * Last beaconing interface disabled - * -> stop beacon queue. - */ - rt2x00queue_stop_queue(rt2x00dev->bcn); - } - /* - * Clear beacon in the H/W for this vif. This is needed - * to disable beaconing on this particular interface - * and keep it running on other interfaces. - */ - rt2x00queue_clear_beacon(rt2x00dev, vif); - } else if (bss_conf->enable_beacon && !intf->enable_beacon) { - rt2x00dev->intf_beaconing++; - intf->enable_beacon = true; - /* - * Upload beacon to the H/W. This is only required on - * USB devices. PCI devices fetch beacons periodically. - */ - if (rt2x00_is_usb(rt2x00dev)) - rt2x00queue_update_beacon(rt2x00dev, vif); - - if (rt2x00dev->intf_beaconing == 1) { - /* - * First beaconing interface enabled - * -> start beacon queue. - */ - rt2x00queue_start_queue(rt2x00dev->bcn); - } - } - mutex_unlock(&intf->beacon_skb_mutex); - } - - /* - * When the association status has changed we must reset the link - * tuner counter. This is because some drivers determine if they - * should perform link tuning based on the number of seconds - * while associated or not associated. - */ - if (changes & BSS_CHANGED_ASSOC) { - rt2x00dev->link.count = 0; - - if (bss_conf->assoc) - rt2x00dev->intf_associated++; - else - rt2x00dev->intf_associated--; - - rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated); - - clear_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags); - } - - /* - * Check for access point which do not support 802.11e . We have to - * generate data frames sequence number in S/W for such AP, because - * of H/W bug. - */ - if (changes & BSS_CHANGED_QOS && !bss_conf->qos) - set_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags); - - /* - * When the erp information has changed, we should perform - * additional configuration steps. For all other changes we are done. - */ - if (changes & (BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE | - BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BASIC_RATES | - BSS_CHANGED_BEACON_INT | BSS_CHANGED_HT)) - rt2x00lib_config_erp(rt2x00dev, intf, bss_conf, changes); -} -EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed); - -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - - queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); - if (unlikely(!queue)) - return -EINVAL; - - /* - * The passed variables are stored as real value ((2^n)-1). - * Ralink registers require to know the bit number 'n'. - */ - if (params->cw_min > 0) - queue->cw_min = fls(params->cw_min); - else - queue->cw_min = 5; /* cw_min: 2^5 = 32. */ - - if (params->cw_max > 0) - queue->cw_max = fls(params->cw_max); - else - queue->cw_max = 10; /* cw_min: 2^10 = 1024. */ - - queue->aifs = params->aifs; - queue->txop = params->txop; - - rt2x00_dbg(rt2x00dev, - "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d\n", - queue_idx, queue->cw_min, queue->cw_max, queue->aifs, - queue->txop); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx); - -void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - bool active = !!rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); - - wiphy_rfkill_set_hw_state(hw->wiphy, !active); -} -EXPORT_SYMBOL_GPL(rt2x00mac_rfkill_poll); - -void rt2x00mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - u32 queues, bool drop) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return; - - tx_queue_for_each(rt2x00dev, queue) - rt2x00queue_flush_queue(queue, drop); -} -EXPORT_SYMBOL_GPL(rt2x00mac_flush); - -int rt2x00mac_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct link_ant *ant = &rt2x00dev->link.ant; - struct antenna_setup *def = &rt2x00dev->default_ant; - struct antenna_setup setup; - - // The antenna value is not supposed to be 0, - // or exceed the maximum number of antenna's. - if (!tx_ant || (tx_ant & ~3) || !rx_ant || (rx_ant & ~3)) - return -EINVAL; - - // When the client tried to configure the antenna to or from - // diversity mode, we must reset the default antenna as well - // as that controls the diversity switch. - if (ant->flags & ANTENNA_TX_DIVERSITY && tx_ant != 3) - ant->flags &= ~ANTENNA_TX_DIVERSITY; - if (ant->flags & ANTENNA_RX_DIVERSITY && rx_ant != 3) - ant->flags &= ~ANTENNA_RX_DIVERSITY; - - // If diversity is being enabled, check if we need hardware - // or software diversity. In the latter case, reset the value, - // and make sure we update the antenna flags to have the - // link tuner pick up the diversity tuning. - if (tx_ant == 3 && def->tx == ANTENNA_SW_DIVERSITY) { - tx_ant = ANTENNA_SW_DIVERSITY; - ant->flags |= ANTENNA_TX_DIVERSITY; - } - - if (rx_ant == 3 && def->rx == ANTENNA_SW_DIVERSITY) { - rx_ant = ANTENNA_SW_DIVERSITY; - ant->flags |= ANTENNA_RX_DIVERSITY; - } - - setup.tx = tx_ant; - setup.rx = rx_ant; - setup.rx_chain_num = 0; - setup.tx_chain_num = 0; - - rt2x00lib_config_antenna(rt2x00dev, setup); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_set_antenna); - -int rt2x00mac_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct link_ant *ant = &rt2x00dev->link.ant; - struct antenna_setup *active = &rt2x00dev->link.ant.active; - - // When software diversity is active, we must report this to the - // client and not the current active antenna state. - if (ant->flags & ANTENNA_TX_DIVERSITY) - *tx_ant = ANTENNA_HW_DIVERSITY; - else - *tx_ant = active->tx; - - if (ant->flags & ANTENNA_RX_DIVERSITY) - *rx_ant = ANTENNA_HW_DIVERSITY; - else - *rx_ant = active->rx; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_get_antenna); - -void rt2x00mac_get_ringparam(struct ieee80211_hw *hw, - u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - - tx_queue_for_each(rt2x00dev, queue) { - *tx += queue->length; - *tx_max += queue->limit; - } - - *rx = rt2x00dev->rx->length; - *rx_max = rt2x00dev->rx->limit; -} -EXPORT_SYMBOL_GPL(rt2x00mac_get_ringparam); - -bool rt2x00mac_tx_frames_pending(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - - tx_queue_for_each(rt2x00dev, queue) { - if (!rt2x00queue_empty(queue)) - return true; - } - - return false; -} -EXPORT_SYMBOL_GPL(rt2x00mac_tx_frames_pending); diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.c b/drivers/net/wireless/rt2x00/rt2x00mmio.c deleted file mode 100644 index f0178fd4fe5f..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00mmio.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00mmio - Abstract: rt2x00 generic mmio device routines. - */ - -#include <linux/dma-mapping.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> - -#include "rt2x00.h" -#include "rt2x00mmio.h" - -/* - * Register access. - */ -int rt2x00mmio_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg) -{ - unsigned int i; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00mmio_register_read(rt2x00dev, offset, reg); - if (!rt2x00_get_field32(*reg, field)) - return 1; - udelay(REGISTER_BUSY_DELAY); - } - - printk_once(KERN_ERR "%s() Indirect register access failed: " - "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg); - *reg = ~0; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mmio_regbusy_read); - -bool rt2x00mmio_rxdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue = rt2x00dev->rx; - struct queue_entry *entry; - struct queue_entry_priv_mmio *entry_priv; - struct skb_frame_desc *skbdesc; - int max_rx = 16; - - while (--max_rx) { - entry = rt2x00queue_get_entry(queue, Q_INDEX); - entry_priv = entry->priv_data; - - if (rt2x00dev->ops->lib->get_entry_state(entry)) - break; - - /* - * Fill in desc fields of the skb descriptor - */ - skbdesc = get_skb_frame_desc(entry->skb); - skbdesc->desc = entry_priv->desc; - skbdesc->desc_len = entry->queue->desc_size; - - /* - * DMA is already done, notify rt2x00lib that - * it finished successfully. - */ - rt2x00lib_dmastart(entry); - rt2x00lib_dmadone(entry); - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, GFP_ATOMIC); - } - - return !max_rx; -} -EXPORT_SYMBOL_GPL(rt2x00mmio_rxdone); - -void rt2x00mmio_flush_queue(struct data_queue *queue, bool drop) -{ - unsigned int i; - - for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++) - msleep(10); -} -EXPORT_SYMBOL_GPL(rt2x00mmio_flush_queue); - -/* - * Device initialization handlers. - */ -static int rt2x00mmio_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) -{ - struct queue_entry_priv_mmio *entry_priv; - void *addr; - dma_addr_t dma; - unsigned int i; - - /* - * Allocate DMA memory for descriptor and buffer. - */ - addr = dma_zalloc_coherent(rt2x00dev->dev, - queue->limit * queue->desc_size, &dma, - GFP_KERNEL); - if (!addr) - return -ENOMEM; - - /* - * Initialize all queue entries to contain valid addresses. - */ - for (i = 0; i < queue->limit; i++) { - entry_priv = queue->entries[i].priv_data; - entry_priv->desc = addr + i * queue->desc_size; - entry_priv->desc_dma = dma + i * queue->desc_size; - } - - return 0; -} - -static void rt2x00mmio_free_queue_dma(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) -{ - struct queue_entry_priv_mmio *entry_priv = - queue->entries[0].priv_data; - - if (entry_priv->desc) - dma_free_coherent(rt2x00dev->dev, - queue->limit * queue->desc_size, - entry_priv->desc, entry_priv->desc_dma); - entry_priv->desc = NULL; -} - -int rt2x00mmio_initialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - int status; - - /* - * Allocate DMA - */ - queue_for_each(rt2x00dev, queue) { - status = rt2x00mmio_alloc_queue_dma(rt2x00dev, queue); - if (status) - goto exit; - } - - /* - * Register interrupt handler. - */ - status = request_irq(rt2x00dev->irq, - rt2x00dev->ops->lib->irq_handler, - IRQF_SHARED, rt2x00dev->name, rt2x00dev); - if (status) { - rt2x00_err(rt2x00dev, "IRQ %d allocation failed (error %d)\n", - rt2x00dev->irq, status); - goto exit; - } - - return 0; - -exit: - queue_for_each(rt2x00dev, queue) - rt2x00mmio_free_queue_dma(rt2x00dev, queue); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00mmio_initialize); - -void rt2x00mmio_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - /* - * Free irq line. - */ - free_irq(rt2x00dev->irq, rt2x00dev); - - /* - * Free DMA - */ - queue_for_each(rt2x00dev, queue) - rt2x00mmio_free_queue_dma(rt2x00dev, queue); -} -EXPORT_SYMBOL_GPL(rt2x00mmio_uninitialize); - -/* - * rt2x00mmio module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 mmio library"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.h b/drivers/net/wireless/rt2x00/rt2x00mmio.h deleted file mode 100644 index 701c3127efb9..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00mmio.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00mmio - Abstract: Data structures for the rt2x00mmio module. - */ - -#ifndef RT2X00MMIO_H -#define RT2X00MMIO_H - -#include <linux/io.h> - -/* - * Register access. - */ -static inline void rt2x00mmio_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - *value = readl(rt2x00dev->csr.base + offset); -} - -static inline void rt2x00mmio_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - memcpy_fromio(value, rt2x00dev->csr.base + offset, length); -} - -static inline void rt2x00mmio_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - writel(value, rt2x00dev->csr.base + offset); -} - -static inline void rt2x00mmio_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, - const u32 length) -{ - __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2); -} - -/** - * rt2x00mmio_regbusy_read - Read from register with busy check - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @field: Field to check if register is busy - * @reg: Pointer to where register contents should be stored - * - * This function will read the given register, and checks if the - * register is busy. If it is, it will sleep for a couple of - * microseconds before reading the register again. If the register - * is not read after a certain timeout, this function will return - * FALSE. - */ -int rt2x00mmio_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg); - -/** - * struct queue_entry_priv_mmio: Per entry PCI specific information - * - * @desc: Pointer to device descriptor - * @desc_dma: DMA pointer to &desc. - * @data: Pointer to device's entry memory. - * @data_dma: DMA pointer to &data. - */ -struct queue_entry_priv_mmio { - __le32 *desc; - dma_addr_t desc_dma; -}; - -/** - * rt2x00mmio_rxdone - Handle RX done events - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * - * Returns true if there are still rx frames pending and false if all - * pending rx frames were processed. - */ -bool rt2x00mmio_rxdone(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00mmio_flush_queue - Flush data queue - * @queue: Data queue to stop - * @drop: True to drop all pending frames. - * - * This will wait for a maximum of 100ms, waiting for the queues - * to become empty. - */ -void rt2x00mmio_flush_queue(struct data_queue *queue, bool drop); - -/* - * Device initialization handlers. - */ -int rt2x00mmio_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00mmio_uninitialize(struct rt2x00_dev *rt2x00dev); - -#endif /* RT2X00MMIO_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c deleted file mode 100644 index d93db4b0371b..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00pci - Abstract: rt2x00 generic pci device routines. - */ - -#include <linux/dma-mapping.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/slab.h> - -#include "rt2x00.h" -#include "rt2x00pci.h" - -/* - * PCI driver handlers. - */ -static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rf); - rt2x00dev->rf = NULL; - - kfree(rt2x00dev->eeprom); - rt2x00dev->eeprom = NULL; - - if (rt2x00dev->csr.base) { - iounmap(rt2x00dev->csr.base); - rt2x00dev->csr.base = NULL; - } -} - -static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) -{ - struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); - - rt2x00dev->csr.base = pci_ioremap_bar(pci_dev, 0); - if (!rt2x00dev->csr.base) - goto exit; - - rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); - if (!rt2x00dev->eeprom) - goto exit; - - rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); - if (!rt2x00dev->rf) - goto exit; - - return 0; - -exit: - rt2x00_probe_err("Failed to allocate registers\n"); - - rt2x00pci_free_reg(rt2x00dev); - - return -ENOMEM; -} - -int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops) -{ - struct ieee80211_hw *hw; - struct rt2x00_dev *rt2x00dev; - int retval; - u16 chip; - - retval = pci_enable_device(pci_dev); - if (retval) { - rt2x00_probe_err("Enable device failed\n"); - return retval; - } - - retval = pci_request_regions(pci_dev, pci_name(pci_dev)); - if (retval) { - rt2x00_probe_err("PCI request regions failed\n"); - goto exit_disable_device; - } - - pci_set_master(pci_dev); - - if (pci_set_mwi(pci_dev)) - rt2x00_probe_err("MWI not available\n"); - - if (dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32))) { - rt2x00_probe_err("PCI DMA not supported\n"); - retval = -EIO; - goto exit_release_regions; - } - - hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); - if (!hw) { - rt2x00_probe_err("Failed to allocate hardware\n"); - retval = -ENOMEM; - goto exit_release_regions; - } - - pci_set_drvdata(pci_dev, hw); - - rt2x00dev = hw->priv; - rt2x00dev->dev = &pci_dev->dev; - rt2x00dev->ops = ops; - rt2x00dev->hw = hw; - rt2x00dev->irq = pci_dev->irq; - rt2x00dev->name = ops->name; - - if (pci_is_pcie(pci_dev)) - rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE); - else - rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); - - retval = rt2x00pci_alloc_reg(rt2x00dev); - if (retval) - goto exit_free_device; - - /* - * Because rt3290 chip use different efuse offset to read efuse data. - * So before read efuse it need to indicate it is the - * rt3290 or not. - */ - pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip); - rt2x00dev->chip.rt = chip; - - retval = rt2x00lib_probe_dev(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00pci_free_reg(rt2x00dev); - -exit_free_device: - ieee80211_free_hw(hw); - -exit_release_regions: - pci_release_regions(pci_dev); - -exit_disable_device: - pci_disable_device(pci_dev); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00pci_probe); - -void rt2x00pci_remove(struct pci_dev *pci_dev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Free all allocated data. - */ - rt2x00lib_remove_dev(rt2x00dev); - rt2x00pci_free_reg(rt2x00dev); - ieee80211_free_hw(hw); - - /* - * Free the PCI device data. - */ - pci_disable_device(pci_dev); - pci_release_regions(pci_dev); -} -EXPORT_SYMBOL_GPL(rt2x00pci_remove); - -#ifdef CONFIG_PM -int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); - struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - - retval = rt2x00lib_suspend(rt2x00dev, state); - if (retval) - return retval; - - pci_save_state(pci_dev); - pci_disable_device(pci_dev); - return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); -} -EXPORT_SYMBOL_GPL(rt2x00pci_suspend); - -int rt2x00pci_resume(struct pci_dev *pci_dev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); - struct rt2x00_dev *rt2x00dev = hw->priv; - - if (pci_set_power_state(pci_dev, PCI_D0) || - pci_enable_device(pci_dev)) { - rt2x00_err(rt2x00dev, "Failed to resume device\n"); - return -EIO; - } - - pci_restore_state(pci_dev); - return rt2x00lib_resume(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00pci_resume); -#endif /* CONFIG_PM */ - -/* - * rt2x00pci module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 pci library"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h deleted file mode 100644 index bc0ca5f58f38..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00pci - Abstract: Data structures for the rt2x00pci module. - */ - -#ifndef RT2X00PCI_H -#define RT2X00PCI_H - -#include <linux/io.h> -#include <linux/pci.h> - -/* - * This variable should be used with the - * pci_driver structure initialization. - */ -#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) - -/* - * PCI driver handlers. - */ -int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops); -void rt2x00pci_remove(struct pci_dev *pci_dev); -#ifdef CONFIG_PM -int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state); -int rt2x00pci_resume(struct pci_dev *pci_dev); -#else -#define rt2x00pci_suspend NULL -#define rt2x00pci_resume NULL -#endif /* CONFIG_PM */ - -#endif /* RT2X00PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c deleted file mode 100644 index 68b620b2462f..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ /dev/null @@ -1,1290 +0,0 @@ -/* - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 queue specific routines. - */ - -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/dma-mapping.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp) -{ - struct data_queue *queue = entry->queue; - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - struct sk_buff *skb; - struct skb_frame_desc *skbdesc; - unsigned int frame_size; - unsigned int head_size = 0; - unsigned int tail_size = 0; - - /* - * The frame size includes descriptor size, because the - * hardware directly receive the frame into the skbuffer. - */ - frame_size = queue->data_size + queue->desc_size + queue->winfo_size; - - /* - * The payload should be aligned to a 4-byte boundary, - * this means we need at least 3 bytes for moving the frame - * into the correct offset. - */ - head_size = 4; - - /* - * For IV/EIV/ICV assembly we must make sure there is - * at least 8 bytes bytes available in headroom for IV/EIV - * and 8 bytes for ICV data as tailroon. - */ - if (rt2x00_has_cap_hw_crypto(rt2x00dev)) { - head_size += 8; - tail_size += 8; - } - - /* - * Allocate skbuffer. - */ - skb = __dev_alloc_skb(frame_size + head_size + tail_size, gfp); - if (!skb) - return NULL; - - /* - * Make sure we not have a frame with the requested bytes - * available in the head and tail. - */ - skb_reserve(skb, head_size); - skb_put(skb, frame_size); - - /* - * Populate skbdesc. - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->entry = entry; - - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) { - dma_addr_t skb_dma; - - skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, - DMA_FROM_DEVICE); - if (unlikely(dma_mapping_error(rt2x00dev->dev, skb_dma))) { - dev_kfree_skb_any(skb); - return NULL; - } - - skbdesc->skb_dma = skb_dma; - skbdesc->flags |= SKBDESC_DMA_MAPPED_RX; - } - - return skb; -} - -int rt2x00queue_map_txskb(struct queue_entry *entry) -{ - struct device *dev = entry->queue->rt2x00dev->dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - - skbdesc->skb_dma = - dma_map_single(dev, entry->skb->data, entry->skb->len, DMA_TO_DEVICE); - - if (unlikely(dma_mapping_error(dev, skbdesc->skb_dma))) - return -ENOMEM; - - skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); - -void rt2x00queue_unmap_skb(struct queue_entry *entry) -{ - struct device *dev = entry->queue->rt2x00dev->dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - - if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) { - dma_unmap_single(dev, skbdesc->skb_dma, entry->skb->len, - DMA_FROM_DEVICE); - skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX; - } else if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { - dma_unmap_single(dev, skbdesc->skb_dma, entry->skb->len, - DMA_TO_DEVICE); - skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; - } -} -EXPORT_SYMBOL_GPL(rt2x00queue_unmap_skb); - -void rt2x00queue_free_skb(struct queue_entry *entry) -{ - if (!entry->skb) - return; - - rt2x00queue_unmap_skb(entry); - dev_kfree_skb_any(entry->skb); - entry->skb = NULL; -} - -void rt2x00queue_align_frame(struct sk_buff *skb) -{ - unsigned int frame_length = skb->len; - unsigned int align = ALIGN_SIZE(skb, 0); - - if (!align) - return; - - skb_push(skb, align); - memmove(skb->data, skb->data + align, frame_length); - skb_trim(skb, frame_length); -} - -/* - * H/W needs L2 padding between the header and the paylod if header size - * is not 4 bytes aligned. - */ -void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int hdr_len) -{ - unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0; - - if (!l2pad) - return; - - skb_push(skb, l2pad); - memmove(skb->data, skb->data + l2pad, hdr_len); -} - -void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int hdr_len) -{ - unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0; - - if (!l2pad) - return; - - memmove(skb->data + l2pad, skb->data, hdr_len); - skb_pull(skb, l2pad); -} - -static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); - u16 seqno; - - if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) - return; - - __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); - - if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_SW_SEQNO)) { - /* - * rt2800 has a H/W (or F/W) bug, device incorrectly increase - * seqno on retransmited data (non-QOS) frames. To workaround - * the problem let's generate seqno in software if QOS is - * disabled. - */ - if (test_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags)) - __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); - else - /* H/W will generate sequence number */ - return; - } - - /* - * The hardware is not able to insert a sequence number. Assign a - * software generated one here. - * - * This is wrong because beacons are not getting sequence - * numbers assigned properly. - * - * A secondary problem exists for drivers that cannot toggle - * sequence counting per-frame, since those will override the - * sequence counter given by mac80211. - */ - if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) - seqno = atomic_add_return(0x10, &intf->seqno); - else - seqno = atomic_read(&intf->seqno); - - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(seqno); -} - -static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc, - const struct rt2x00_rate *hwrate) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; - unsigned int data_length; - unsigned int duration; - unsigned int residual; - - /* - * Determine with what IFS priority this frame should be send. - * Set ifs to IFS_SIFS when the this is not the first fragment, - * or this fragment came after RTS/CTS. - */ - if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) - txdesc->u.plcp.ifs = IFS_BACKOFF; - else - txdesc->u.plcp.ifs = IFS_SIFS; - - /* Data length + CRC + Crypto overhead (IV/EIV/ICV/MIC) */ - data_length = skb->len + 4; - data_length += rt2x00crypto_tx_overhead(rt2x00dev, skb); - - /* - * PLCP setup - * Length calculation depends on OFDM/CCK rate. - */ - txdesc->u.plcp.signal = hwrate->plcp; - txdesc->u.plcp.service = 0x04; - - if (hwrate->flags & DEV_RATE_OFDM) { - txdesc->u.plcp.length_high = (data_length >> 6) & 0x3f; - txdesc->u.plcp.length_low = data_length & 0x3f; - } else { - /* - * Convert length to microseconds. - */ - residual = GET_DURATION_RES(data_length, hwrate->bitrate); - duration = GET_DURATION(data_length, hwrate->bitrate); - - if (residual != 0) { - duration++; - - /* - * Check if we need to set the Length Extension - */ - if (hwrate->bitrate == 110 && residual <= 30) - txdesc->u.plcp.service |= 0x80; - } - - txdesc->u.plcp.length_high = (duration >> 8) & 0xff; - txdesc->u.plcp.length_low = duration & 0xff; - - /* - * When preamble is enabled we should set the - * preamble bit for the signal. - */ - if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) - txdesc->u.plcp.signal |= 0x08; - } -} - -static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_sta *sta, - const struct rt2x00_rate *hwrate) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct rt2x00_sta *sta_priv = NULL; - - if (sta) { - txdesc->u.ht.mpdu_density = - sta->ht_cap.ampdu_density; - - sta_priv = sta_to_rt2x00_sta(sta); - txdesc->u.ht.wcid = sta_priv->wcid; - } - - /* - * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the - * mcs rate to be used - */ - if (txrate->flags & IEEE80211_TX_RC_MCS) { - txdesc->u.ht.mcs = txrate->idx; - - /* - * MIMO PS should be set to 1 for STA's using dynamic SM PS - * when using more then one tx stream (>MCS7). - */ - if (sta && txdesc->u.ht.mcs > 7 && - sta->smps_mode == IEEE80211_SMPS_DYNAMIC) - __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags); - } else { - txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs); - if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) - txdesc->u.ht.mcs |= 0x08; - } - - if (test_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags)) { - if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)) - txdesc->u.ht.txop = TXOP_SIFS; - else - txdesc->u.ht.txop = TXOP_BACKOFF; - - /* Left zero on all other settings. */ - return; - } - - txdesc->u.ht.ba_size = 7; /* FIXME: What value is needed? */ - - /* - * Only one STBC stream is supported for now. - */ - if (tx_info->flags & IEEE80211_TX_CTL_STBC) - txdesc->u.ht.stbc = 1; - - /* - * This frame is eligible for an AMPDU, however, don't aggregate - * frames that are intended to probe a specific tx rate. - */ - if (tx_info->flags & IEEE80211_TX_CTL_AMPDU && - !(tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)) - __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags); - - /* - * Set 40Mhz mode if necessary (for legacy rates this will - * duplicate the frame to both channels). - */ - if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH || - txrate->flags & IEEE80211_TX_RC_DUP_DATA) - __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags); - if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) - __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags); - - /* - * Determine IFS values - * - Use TXOP_BACKOFF for management frames except beacons - * - Use TXOP_SIFS for fragment bursts - * - Use TXOP_HTTXOP for everything else - * - * Note: rt2800 devices won't use CTS protection (if used) - * for frames not transmitted with TXOP_HTTXOP - */ - if (ieee80211_is_mgmt(hdr->frame_control) && - !ieee80211_is_beacon(hdr->frame_control)) - txdesc->u.ht.txop = TXOP_BACKOFF; - else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)) - txdesc->u.ht.txop = TXOP_SIFS; - else - txdesc->u.ht.txop = TXOP_HTTXOP; -} - -static void rt2x00queue_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_sta *sta) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; - struct ieee80211_rate *rate; - const struct rt2x00_rate *hwrate = NULL; - - memset(txdesc, 0, sizeof(*txdesc)); - - /* - * Header and frame information. - */ - txdesc->length = skb->len; - txdesc->header_length = ieee80211_get_hdrlen_from_skb(skb); - - /* - * Check whether this frame is to be acked. - */ - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) - __set_bit(ENTRY_TXD_ACK, &txdesc->flags); - - /* - * Check if this is a RTS/CTS frame - */ - if (ieee80211_is_rts(hdr->frame_control) || - ieee80211_is_cts(hdr->frame_control)) { - __set_bit(ENTRY_TXD_BURST, &txdesc->flags); - if (ieee80211_is_rts(hdr->frame_control)) - __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags); - else - __set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags); - if (tx_info->control.rts_cts_rate_idx >= 0) - rate = - ieee80211_get_rts_cts_rate(rt2x00dev->hw, tx_info); - } - - /* - * Determine retry information. - */ - txdesc->retry_limit = tx_info->control.rates[0].count - 1; - if (txdesc->retry_limit >= rt2x00dev->long_retry) - __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); - - /* - * Check if more fragments are pending - */ - if (ieee80211_has_morefrags(hdr->frame_control)) { - __set_bit(ENTRY_TXD_BURST, &txdesc->flags); - __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags); - } - - /* - * Check if more frames (!= fragments) are pending - */ - if (tx_info->flags & IEEE80211_TX_CTL_MORE_FRAMES) - __set_bit(ENTRY_TXD_BURST, &txdesc->flags); - - /* - * Beacons and probe responses require the tsf timestamp - * to be inserted into the frame. - */ - if (ieee80211_is_beacon(hdr->frame_control) || - ieee80211_is_probe_resp(hdr->frame_control)) - __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags); - - if ((tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) && - !test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) - __set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags); - - /* - * Determine rate modulation. - */ - if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) - txdesc->rate_mode = RATE_MODE_HT_GREENFIELD; - else if (txrate->flags & IEEE80211_TX_RC_MCS) - txdesc->rate_mode = RATE_MODE_HT_MIX; - else { - rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); - hwrate = rt2x00_get_rate(rate->hw_value); - if (hwrate->flags & DEV_RATE_OFDM) - txdesc->rate_mode = RATE_MODE_OFDM; - else - txdesc->rate_mode = RATE_MODE_CCK; - } - - /* - * Apply TX descriptor handling by components - */ - rt2x00crypto_create_tx_descriptor(rt2x00dev, skb, txdesc); - rt2x00queue_create_tx_descriptor_seq(rt2x00dev, skb, txdesc); - - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_HT_TX_DESC)) - rt2x00queue_create_tx_descriptor_ht(rt2x00dev, skb, txdesc, - sta, hwrate); - else - rt2x00queue_create_tx_descriptor_plcp(rt2x00dev, skb, txdesc, - hwrate); -} - -static int rt2x00queue_write_tx_data(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - - /* - * This should not happen, we already checked the entry - * was ours. When the hardware disagrees there has been - * a queue corruption! - */ - if (unlikely(rt2x00dev->ops->lib->get_entry_state && - rt2x00dev->ops->lib->get_entry_state(entry))) { - rt2x00_err(rt2x00dev, - "Corrupt queue %d, accessing entry which is not ours\n" - "Please file bug report to %s\n", - entry->queue->qid, DRV_PROJECT); - return -EINVAL; - } - - /* - * Add the requested extra tx headroom in front of the skb. - */ - skb_push(entry->skb, rt2x00dev->extra_tx_headroom); - memset(entry->skb->data, 0, rt2x00dev->extra_tx_headroom); - - /* - * Call the driver's write_tx_data function, if it exists. - */ - if (rt2x00dev->ops->lib->write_tx_data) - rt2x00dev->ops->lib->write_tx_data(entry, txdesc); - - /* - * Map the skb to DMA. - */ - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA) && - rt2x00queue_map_txskb(entry)) - return -ENOMEM; - - return 0; -} - -static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct data_queue *queue = entry->queue; - - queue->rt2x00dev->ops->lib->write_tx_desc(entry, txdesc); - - /* - * All processing on the frame has been completed, this means - * it is now ready to be dumped to userspace through debugfs. - */ - rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry->skb); -} - -static void rt2x00queue_kick_tx_queue(struct data_queue *queue, - struct txentry_desc *txdesc) -{ - /* - * Check if we need to kick the queue, there are however a few rules - * 1) Don't kick unless this is the last in frame in a burst. - * When the burst flag is set, this frame is always followed - * by another frame which in some way are related to eachother. - * This is true for fragments, RTS or CTS-to-self frames. - * 2) Rule 1 can be broken when the available entries - * in the queue are less then a certain threshold. - */ - if (rt2x00queue_threshold(queue) || - !test_bit(ENTRY_TXD_BURST, &txdesc->flags)) - queue->rt2x00dev->ops->lib->kick_queue(queue); -} - -static void rt2x00queue_bar_check(struct queue_entry *entry) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct ieee80211_bar *bar = (void *) (entry->skb->data + - rt2x00dev->extra_tx_headroom); - struct rt2x00_bar_list_entry *bar_entry; - - if (likely(!ieee80211_is_back_req(bar->frame_control))) - return; - - bar_entry = kmalloc(sizeof(*bar_entry), GFP_ATOMIC); - - /* - * If the alloc fails we still send the BAR out but just don't track - * it in our bar list. And as a result we will report it to mac80211 - * back as failed. - */ - if (!bar_entry) - return; - - bar_entry->entry = entry; - bar_entry->block_acked = 0; - - /* - * Copy the relevant parts of the 802.11 BAR into out check list - * such that we can use RCU for less-overhead in the RX path since - * sending BARs and processing the according BlockAck should be - * the exception. - */ - memcpy(bar_entry->ra, bar->ra, sizeof(bar->ra)); - memcpy(bar_entry->ta, bar->ta, sizeof(bar->ta)); - bar_entry->control = bar->control; - bar_entry->start_seq_num = bar->start_seq_num; - - /* - * Insert BAR into our BAR check list. - */ - spin_lock_bh(&rt2x00dev->bar_list_lock); - list_add_tail_rcu(&bar_entry->list, &rt2x00dev->bar_list); - spin_unlock_bh(&rt2x00dev->bar_list_lock); -} - -int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, - struct ieee80211_sta *sta, bool local) -{ - struct ieee80211_tx_info *tx_info; - struct queue_entry *entry; - struct txentry_desc txdesc; - struct skb_frame_desc *skbdesc; - u8 rate_idx, rate_flags; - int ret = 0; - - /* - * Copy all TX descriptor information into txdesc, - * after that we are free to use the skb->cb array - * for our information. - */ - rt2x00queue_create_tx_descriptor(queue->rt2x00dev, skb, &txdesc, sta); - - /* - * All information is retrieved from the skb->cb array, - * now we should claim ownership of the driver part of that - * array, preserving the bitrate index and flags. - */ - tx_info = IEEE80211_SKB_CB(skb); - rate_idx = tx_info->control.rates[0].idx; - rate_flags = tx_info->control.rates[0].flags; - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->tx_rate_idx = rate_idx; - skbdesc->tx_rate_flags = rate_flags; - - if (local) - skbdesc->flags |= SKBDESC_NOT_MAC80211; - - /* - * When hardware encryption is supported, and this frame - * is to be encrypted, we should strip the IV/EIV data from - * the frame so we can provide it to the driver separately. - */ - if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && - !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { - if (rt2x00_has_cap_flag(queue->rt2x00dev, REQUIRE_COPY_IV)) - rt2x00crypto_tx_copy_iv(skb, &txdesc); - else - rt2x00crypto_tx_remove_iv(skb, &txdesc); - } - - /* - * When DMA allocation is required we should guarantee to the - * driver that the DMA is aligned to a 4-byte boundary. - * However some drivers require L2 padding to pad the payload - * rather then the header. This could be a requirement for - * PCI and USB devices, while header alignment only is valid - * for PCI devices. - */ - if (rt2x00_has_cap_flag(queue->rt2x00dev, REQUIRE_L2PAD)) - rt2x00queue_insert_l2pad(skb, txdesc.header_length); - else if (rt2x00_has_cap_flag(queue->rt2x00dev, REQUIRE_DMA)) - rt2x00queue_align_frame(skb); - - /* - * That function must be called with bh disabled. - */ - spin_lock(&queue->tx_lock); - - if (unlikely(rt2x00queue_full(queue))) { - rt2x00_err(queue->rt2x00dev, "Dropping frame due to full tx queue %d\n", - queue->qid); - ret = -ENOBUFS; - goto out; - } - - entry = rt2x00queue_get_entry(queue, Q_INDEX); - - if (unlikely(test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, - &entry->flags))) { - rt2x00_err(queue->rt2x00dev, - "Arrived at non-free entry in the non-full queue %d\n" - "Please file bug report to %s\n", - queue->qid, DRV_PROJECT); - ret = -EINVAL; - goto out; - } - - skbdesc->entry = entry; - entry->skb = skb; - - /* - * It could be possible that the queue was corrupted and this - * call failed. Since we always return NETDEV_TX_OK to mac80211, - * this frame will simply be dropped. - */ - if (unlikely(rt2x00queue_write_tx_data(entry, &txdesc))) { - clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - entry->skb = NULL; - ret = -EIO; - goto out; - } - - /* - * Put BlockAckReqs into our check list for driver BA processing. - */ - rt2x00queue_bar_check(entry); - - set_bit(ENTRY_DATA_PENDING, &entry->flags); - - rt2x00queue_index_inc(entry, Q_INDEX); - rt2x00queue_write_tx_descriptor(entry, &txdesc); - rt2x00queue_kick_tx_queue(queue, &txdesc); - -out: - spin_unlock(&queue->tx_lock); - return ret; -} - -int rt2x00queue_clear_beacon(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif) -{ - struct rt2x00_intf *intf = vif_to_intf(vif); - - if (unlikely(!intf->beacon)) - return -ENOBUFS; - - /* - * Clean up the beacon skb. - */ - rt2x00queue_free_skb(intf->beacon); - - /* - * Clear beacon (single bssid devices don't need to clear the beacon - * since the beacon queue will get stopped anyway). - */ - if (rt2x00dev->ops->lib->clear_beacon) - rt2x00dev->ops->lib->clear_beacon(intf->beacon); - - return 0; -} - -int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif) -{ - struct rt2x00_intf *intf = vif_to_intf(vif); - struct skb_frame_desc *skbdesc; - struct txentry_desc txdesc; - - if (unlikely(!intf->beacon)) - return -ENOBUFS; - - /* - * Clean up the beacon skb. - */ - rt2x00queue_free_skb(intf->beacon); - - intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif); - if (!intf->beacon->skb) - return -ENOMEM; - - /* - * Copy all TX descriptor information into txdesc, - * after that we are free to use the skb->cb array - * for our information. - */ - rt2x00queue_create_tx_descriptor(rt2x00dev, intf->beacon->skb, &txdesc, NULL); - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(intf->beacon->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->entry = intf->beacon; - - /* - * Send beacon to hardware. - */ - rt2x00dev->ops->lib->write_beacon(intf->beacon, &txdesc); - - return 0; - -} - -bool rt2x00queue_for_each_entry(struct data_queue *queue, - enum queue_index start, - enum queue_index end, - void *data, - bool (*fn)(struct queue_entry *entry, - void *data)) -{ - unsigned long irqflags; - unsigned int index_start; - unsigned int index_end; - unsigned int i; - - if (unlikely(start >= Q_INDEX_MAX || end >= Q_INDEX_MAX)) { - rt2x00_err(queue->rt2x00dev, - "Entry requested from invalid index range (%d - %d)\n", - start, end); - return true; - } - - /* - * Only protect the range we are going to loop over, - * if during our loop a extra entry is set to pending - * it should not be kicked during this run, since it - * is part of another TX operation. - */ - spin_lock_irqsave(&queue->index_lock, irqflags); - index_start = queue->index[start]; - index_end = queue->index[end]; - spin_unlock_irqrestore(&queue->index_lock, irqflags); - - /* - * Start from the TX done pointer, this guarantees that we will - * send out all frames in the correct order. - */ - if (index_start < index_end) { - for (i = index_start; i < index_end; i++) { - if (fn(&queue->entries[i], data)) - return true; - } - } else { - for (i = index_start; i < queue->limit; i++) { - if (fn(&queue->entries[i], data)) - return true; - } - - for (i = 0; i < index_end; i++) { - if (fn(&queue->entries[i], data)) - return true; - } - } - - return false; -} -EXPORT_SYMBOL_GPL(rt2x00queue_for_each_entry); - -struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, - enum queue_index index) -{ - struct queue_entry *entry; - unsigned long irqflags; - - if (unlikely(index >= Q_INDEX_MAX)) { - rt2x00_err(queue->rt2x00dev, "Entry requested from invalid index type (%d)\n", - index); - return NULL; - } - - spin_lock_irqsave(&queue->index_lock, irqflags); - - entry = &queue->entries[queue->index[index]]; - - spin_unlock_irqrestore(&queue->index_lock, irqflags); - - return entry; -} -EXPORT_SYMBOL_GPL(rt2x00queue_get_entry); - -void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index) -{ - struct data_queue *queue = entry->queue; - unsigned long irqflags; - - if (unlikely(index >= Q_INDEX_MAX)) { - rt2x00_err(queue->rt2x00dev, - "Index change on invalid index type (%d)\n", index); - return; - } - - spin_lock_irqsave(&queue->index_lock, irqflags); - - queue->index[index]++; - if (queue->index[index] >= queue->limit) - queue->index[index] = 0; - - entry->last_action = jiffies; - - if (index == Q_INDEX) { - queue->length++; - } else if (index == Q_INDEX_DONE) { - queue->length--; - queue->count++; - } - - spin_unlock_irqrestore(&queue->index_lock, irqflags); -} - -static void rt2x00queue_pause_queue_nocheck(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - /* - * For TX queues, we have to disable the queue - * inside mac80211. - */ - ieee80211_stop_queue(queue->rt2x00dev->hw, queue->qid); - break; - default: - break; - } -} -void rt2x00queue_pause_queue(struct data_queue *queue) -{ - if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) || - !test_bit(QUEUE_STARTED, &queue->flags) || - test_and_set_bit(QUEUE_PAUSED, &queue->flags)) - return; - - rt2x00queue_pause_queue_nocheck(queue); -} -EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue); - -void rt2x00queue_unpause_queue(struct data_queue *queue) -{ - if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) || - !test_bit(QUEUE_STARTED, &queue->flags) || - !test_and_clear_bit(QUEUE_PAUSED, &queue->flags)) - return; - - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - /* - * For TX queues, we have to enable the queue - * inside mac80211. - */ - ieee80211_wake_queue(queue->rt2x00dev->hw, queue->qid); - break; - case QID_RX: - /* - * For RX we need to kick the queue now in order to - * receive frames. - */ - queue->rt2x00dev->ops->lib->kick_queue(queue); - default: - break; - } -} -EXPORT_SYMBOL_GPL(rt2x00queue_unpause_queue); - -void rt2x00queue_start_queue(struct data_queue *queue) -{ - mutex_lock(&queue->status_lock); - - if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) || - test_and_set_bit(QUEUE_STARTED, &queue->flags)) { - mutex_unlock(&queue->status_lock); - return; - } - - set_bit(QUEUE_PAUSED, &queue->flags); - - queue->rt2x00dev->ops->lib->start_queue(queue); - - rt2x00queue_unpause_queue(queue); - - mutex_unlock(&queue->status_lock); -} -EXPORT_SYMBOL_GPL(rt2x00queue_start_queue); - -void rt2x00queue_stop_queue(struct data_queue *queue) -{ - mutex_lock(&queue->status_lock); - - if (!test_and_clear_bit(QUEUE_STARTED, &queue->flags)) { - mutex_unlock(&queue->status_lock); - return; - } - - rt2x00queue_pause_queue_nocheck(queue); - - queue->rt2x00dev->ops->lib->stop_queue(queue); - - mutex_unlock(&queue->status_lock); -} -EXPORT_SYMBOL_GPL(rt2x00queue_stop_queue); - -void rt2x00queue_flush_queue(struct data_queue *queue, bool drop) -{ - bool tx_queue = - (queue->qid == QID_AC_VO) || - (queue->qid == QID_AC_VI) || - (queue->qid == QID_AC_BE) || - (queue->qid == QID_AC_BK); - - - /* - * If we are not supposed to drop any pending - * frames, this means we must force a start (=kick) - * to the queue to make sure the hardware will - * start transmitting. - */ - if (!drop && tx_queue) - queue->rt2x00dev->ops->lib->kick_queue(queue); - - /* - * Check if driver supports flushing, if that is the case we can - * defer the flushing to the driver. Otherwise we must use the - * alternative which just waits for the queue to become empty. - */ - if (likely(queue->rt2x00dev->ops->lib->flush_queue)) - queue->rt2x00dev->ops->lib->flush_queue(queue, drop); - - /* - * The queue flush has failed... - */ - if (unlikely(!rt2x00queue_empty(queue))) - rt2x00_warn(queue->rt2x00dev, "Queue %d failed to flush\n", - queue->qid); -} -EXPORT_SYMBOL_GPL(rt2x00queue_flush_queue); - -void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - /* - * rt2x00queue_start_queue will call ieee80211_wake_queue - * for each queue after is has been properly initialized. - */ - tx_queue_for_each(rt2x00dev, queue) - rt2x00queue_start_queue(queue); - - rt2x00queue_start_queue(rt2x00dev->rx); -} -EXPORT_SYMBOL_GPL(rt2x00queue_start_queues); - -void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - /* - * rt2x00queue_stop_queue will call ieee80211_stop_queue - * as well, but we are completely shutting doing everything - * now, so it is much safer to stop all TX queues at once, - * and use rt2x00queue_stop_queue for cleaning up. - */ - ieee80211_stop_queues(rt2x00dev->hw); - - tx_queue_for_each(rt2x00dev, queue) - rt2x00queue_stop_queue(queue); - - rt2x00queue_stop_queue(rt2x00dev->rx); -} -EXPORT_SYMBOL_GPL(rt2x00queue_stop_queues); - -void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop) -{ - struct data_queue *queue; - - tx_queue_for_each(rt2x00dev, queue) - rt2x00queue_flush_queue(queue, drop); - - rt2x00queue_flush_queue(rt2x00dev->rx, drop); -} -EXPORT_SYMBOL_GPL(rt2x00queue_flush_queues); - -static void rt2x00queue_reset(struct data_queue *queue) -{ - unsigned long irqflags; - unsigned int i; - - spin_lock_irqsave(&queue->index_lock, irqflags); - - queue->count = 0; - queue->length = 0; - - for (i = 0; i < Q_INDEX_MAX; i++) - queue->index[i] = 0; - - spin_unlock_irqrestore(&queue->index_lock, irqflags); -} - -void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - unsigned int i; - - queue_for_each(rt2x00dev, queue) { - rt2x00queue_reset(queue); - - for (i = 0; i < queue->limit; i++) - rt2x00dev->ops->lib->clear_entry(&queue->entries[i]); - } -} - -static int rt2x00queue_alloc_entries(struct data_queue *queue) -{ - struct queue_entry *entries; - unsigned int entry_size; - unsigned int i; - - rt2x00queue_reset(queue); - - /* - * Allocate all queue entries. - */ - entry_size = sizeof(*entries) + queue->priv_size; - entries = kcalloc(queue->limit, entry_size, GFP_KERNEL); - if (!entries) - return -ENOMEM; - -#define QUEUE_ENTRY_PRIV_OFFSET(__base, __index, __limit, __esize, __psize) \ - (((char *)(__base)) + ((__limit) * (__esize)) + \ - ((__index) * (__psize))) - - for (i = 0; i < queue->limit; i++) { - entries[i].flags = 0; - entries[i].queue = queue; - entries[i].skb = NULL; - entries[i].entry_idx = i; - entries[i].priv_data = - QUEUE_ENTRY_PRIV_OFFSET(entries, i, queue->limit, - sizeof(*entries), queue->priv_size); - } - -#undef QUEUE_ENTRY_PRIV_OFFSET - - queue->entries = entries; - - return 0; -} - -static void rt2x00queue_free_skbs(struct data_queue *queue) -{ - unsigned int i; - - if (!queue->entries) - return; - - for (i = 0; i < queue->limit; i++) { - rt2x00queue_free_skb(&queue->entries[i]); - } -} - -static int rt2x00queue_alloc_rxskbs(struct data_queue *queue) -{ - unsigned int i; - struct sk_buff *skb; - - for (i = 0; i < queue->limit; i++) { - skb = rt2x00queue_alloc_rxskb(&queue->entries[i], GFP_KERNEL); - if (!skb) - return -ENOMEM; - queue->entries[i].skb = skb; - } - - return 0; -} - -int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - int status; - - status = rt2x00queue_alloc_entries(rt2x00dev->rx); - if (status) - goto exit; - - tx_queue_for_each(rt2x00dev, queue) { - status = rt2x00queue_alloc_entries(queue); - if (status) - goto exit; - } - - status = rt2x00queue_alloc_entries(rt2x00dev->bcn); - if (status) - goto exit; - - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_ATIM_QUEUE)) { - status = rt2x00queue_alloc_entries(rt2x00dev->atim); - if (status) - goto exit; - } - - status = rt2x00queue_alloc_rxskbs(rt2x00dev->rx); - if (status) - goto exit; - - return 0; - -exit: - rt2x00_err(rt2x00dev, "Queue entries allocation failed\n"); - - rt2x00queue_uninitialize(rt2x00dev); - - return status; -} - -void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - rt2x00queue_free_skbs(rt2x00dev->rx); - - queue_for_each(rt2x00dev, queue) { - kfree(queue->entries); - queue->entries = NULL; - } -} - -static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue, enum data_queue_qid qid) -{ - mutex_init(&queue->status_lock); - spin_lock_init(&queue->tx_lock); - spin_lock_init(&queue->index_lock); - - queue->rt2x00dev = rt2x00dev; - queue->qid = qid; - queue->txop = 0; - queue->aifs = 2; - queue->cw_min = 5; - queue->cw_max = 10; - - rt2x00dev->ops->queue_init(queue); - - queue->threshold = DIV_ROUND_UP(queue->limit, 10); -} - -int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - enum data_queue_qid qid; - unsigned int req_atim = - rt2x00_has_cap_flag(rt2x00dev, REQUIRE_ATIM_QUEUE); - - /* - * We need the following queues: - * RX: 1 - * TX: ops->tx_queues - * Beacon: 1 - * Atim: 1 (if required) - */ - rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim; - - queue = kcalloc(rt2x00dev->data_queues, sizeof(*queue), GFP_KERNEL); - if (!queue) { - rt2x00_err(rt2x00dev, "Queue allocation failed\n"); - return -ENOMEM; - } - - /* - * Initialize pointers - */ - rt2x00dev->rx = queue; - rt2x00dev->tx = &queue[1]; - rt2x00dev->bcn = &queue[1 + rt2x00dev->ops->tx_queues]; - rt2x00dev->atim = req_atim ? &queue[2 + rt2x00dev->ops->tx_queues] : NULL; - - /* - * Initialize queue parameters. - * RX: qid = QID_RX - * TX: qid = QID_AC_VO + index - * TX: cw_min: 2^5 = 32. - * TX: cw_max: 2^10 = 1024. - * BCN: qid = QID_BEACON - * ATIM: qid = QID_ATIM - */ - rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX); - - qid = QID_AC_VO; - tx_queue_for_each(rt2x00dev, queue) - rt2x00queue_init(rt2x00dev, queue, qid++); - - rt2x00queue_init(rt2x00dev, rt2x00dev->bcn, QID_BEACON); - if (req_atim) - rt2x00queue_init(rt2x00dev, rt2x00dev->atim, QID_ATIM); - - return 0; -} - -void rt2x00queue_free(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rx); - rt2x00dev->rx = NULL; - rt2x00dev->tx = NULL; - rt2x00dev->bcn = NULL; -} diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h deleted file mode 100644 index 2233b911a1d7..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ /dev/null @@ -1,686 +0,0 @@ -/* - Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00 - Abstract: rt2x00 queue datastructures and routines - */ - -#ifndef RT2X00QUEUE_H -#define RT2X00QUEUE_H - -#include <linux/prefetch.h> - -/** - * DOC: Entry frame size - * - * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes, - * for USB devices this restriction does not apply, but the value of - * 2432 makes sense since it is big enough to contain the maximum fragment - * size according to the ieee802.11 specs. - * The aggregation size depends on support from the driver, but should - * be something around 3840 bytes. - */ -#define DATA_FRAME_SIZE 2432 -#define MGMT_FRAME_SIZE 256 -#define AGGREGATION_SIZE 3840 - -/** - * enum data_queue_qid: Queue identification - * - * @QID_AC_VO: AC VO queue - * @QID_AC_VI: AC VI queue - * @QID_AC_BE: AC BE queue - * @QID_AC_BK: AC BK queue - * @QID_HCCA: HCCA queue - * @QID_MGMT: MGMT queue (prio queue) - * @QID_RX: RX queue - * @QID_OTHER: None of the above (don't use, only present for completeness) - * @QID_BEACON: Beacon queue (value unspecified, don't send it to device) - * @QID_ATIM: Atim queue (value unspecified, don't send it to device) - */ -enum data_queue_qid { - QID_AC_VO = 0, - QID_AC_VI = 1, - QID_AC_BE = 2, - QID_AC_BK = 3, - QID_HCCA = 4, - QID_MGMT = 13, - QID_RX = 14, - QID_OTHER = 15, - QID_BEACON, - QID_ATIM, -}; - -/** - * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc - * - * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX - * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX - * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by - * mac80211 but was stripped for processing by the driver. - * @SKBDESC_NOT_MAC80211: Frame didn't originate from mac80211, - * don't try to pass it back. - * @SKBDESC_DESC_IN_SKB: The descriptor is at the start of the - * skb, instead of in the desc field. - */ -enum skb_frame_desc_flags { - SKBDESC_DMA_MAPPED_RX = 1 << 0, - SKBDESC_DMA_MAPPED_TX = 1 << 1, - SKBDESC_IV_STRIPPED = 1 << 2, - SKBDESC_NOT_MAC80211 = 1 << 3, - SKBDESC_DESC_IN_SKB = 1 << 4, -}; - -/** - * struct skb_frame_desc: Descriptor information for the skb buffer - * - * This structure is placed over the driver_data array, this means that - * this structure should not exceed the size of that array (40 bytes). - * - * @flags: Frame flags, see &enum skb_frame_desc_flags. - * @desc_len: Length of the frame descriptor. - * @tx_rate_idx: the index of the TX rate, used for TX status reporting - * @tx_rate_flags: the TX rate flags, used for TX status reporting - * @desc: Pointer to descriptor part of the frame. - * Note that this pointer could point to something outside - * of the scope of the skb->data pointer. - * @iv: IV/EIV data used during encryption/decryption. - * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. - * @entry: The entry to which this sk buffer belongs. - */ -struct skb_frame_desc { - u8 flags; - - u8 desc_len; - u8 tx_rate_idx; - u8 tx_rate_flags; - - void *desc; - - __le32 iv[2]; - - dma_addr_t skb_dma; - - struct queue_entry *entry; -}; - -/** - * get_skb_frame_desc - Obtain the rt2x00 frame descriptor from a sk_buff. - * @skb: &struct sk_buff from where we obtain the &struct skb_frame_desc - */ -static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) -{ - BUILD_BUG_ON(sizeof(struct skb_frame_desc) > - IEEE80211_TX_INFO_DRIVER_DATA_SIZE); - return (struct skb_frame_desc *)&IEEE80211_SKB_CB(skb)->driver_data; -} - -/** - * enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc - * - * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value. - * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value. - * @RXDONE_SIGNAL_MCS: Signal field contains the mcs value. - * @RXDONE_MY_BSS: Does this frame originate from device's BSS. - * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data. - * @RXDONE_CRYPTO_ICV: Driver provided ICV data. - * @RXDONE_L2PAD: 802.11 payload has been padded to 4-byte boundary. - */ -enum rxdone_entry_desc_flags { - RXDONE_SIGNAL_PLCP = BIT(0), - RXDONE_SIGNAL_BITRATE = BIT(1), - RXDONE_SIGNAL_MCS = BIT(2), - RXDONE_MY_BSS = BIT(3), - RXDONE_CRYPTO_IV = BIT(4), - RXDONE_CRYPTO_ICV = BIT(5), - RXDONE_L2PAD = BIT(6), -}; - -/** - * RXDONE_SIGNAL_MASK - Define to mask off all &rxdone_entry_desc_flags flags - * except for the RXDONE_SIGNAL_* flags. This is useful to convert the dev_flags - * from &rxdone_entry_desc to a signal value type. - */ -#define RXDONE_SIGNAL_MASK \ - ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE | RXDONE_SIGNAL_MCS ) - -/** - * struct rxdone_entry_desc: RX Entry descriptor - * - * Summary of information that has been read from the RX frame descriptor. - * - * @timestamp: RX Timestamp - * @signal: Signal of the received frame. - * @rssi: RSSI of the received frame. - * @size: Data size of the received frame. - * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). - * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). - * @rate_mode: Rate mode (See @enum rate_modulation). - * @cipher: Cipher type used during decryption. - * @cipher_status: Decryption status. - * @iv: IV/EIV data used during decryption. - * @icv: ICV data used during decryption. - */ -struct rxdone_entry_desc { - u64 timestamp; - int signal; - int rssi; - int size; - int flags; - int dev_flags; - u16 rate_mode; - u8 cipher; - u8 cipher_status; - - __le32 iv[2]; - __le32 icv; -}; - -/** - * enum txdone_entry_desc_flags: Flags for &struct txdone_entry_desc - * - * Every txdone report has to contain the basic result of the - * transmission, either &TXDONE_UNKNOWN, &TXDONE_SUCCESS or - * &TXDONE_FAILURE. The flag &TXDONE_FALLBACK can be used in - * conjunction with all of these flags but should only be set - * if retires > 0. The flag &TXDONE_EXCESSIVE_RETRY can only be used - * in conjunction with &TXDONE_FAILURE. - * - * @TXDONE_UNKNOWN: Hardware could not determine success of transmission. - * @TXDONE_SUCCESS: Frame was successfully send - * @TXDONE_FALLBACK: Hardware used fallback rates for retries - * @TXDONE_FAILURE: Frame was not successfully send - * @TXDONE_EXCESSIVE_RETRY: In addition to &TXDONE_FAILURE, the - * frame transmission failed due to excessive retries. - */ -enum txdone_entry_desc_flags { - TXDONE_UNKNOWN, - TXDONE_SUCCESS, - TXDONE_FALLBACK, - TXDONE_FAILURE, - TXDONE_EXCESSIVE_RETRY, - TXDONE_AMPDU, -}; - -/** - * struct txdone_entry_desc: TX done entry descriptor - * - * Summary of information that has been read from the TX frame descriptor - * after the device is done with transmission. - * - * @flags: TX done flags (See &enum txdone_entry_desc_flags). - * @retry: Retry count. - */ -struct txdone_entry_desc { - unsigned long flags; - int retry; -}; - -/** - * enum txentry_desc_flags: Status flags for TX entry descriptor - * - * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. - * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. - * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter. - * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. - * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. - * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. - * @ENTRY_TXD_BURST: This frame belongs to the same burst event. - * @ENTRY_TXD_ACK: An ACK is required for this frame. - * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used. - * @ENTRY_TXD_ENCRYPT: This frame should be encrypted. - * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared). - * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware. - * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware. - * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU. - * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth. - * @ENTRY_TXD_HT_SHORT_GI: Use short GI. - * @ENTRY_TXD_HT_MIMO_PS: The receiving STA is in dynamic SM PS mode. - */ -enum txentry_desc_flags { - ENTRY_TXD_RTS_FRAME, - ENTRY_TXD_CTS_FRAME, - ENTRY_TXD_GENERATE_SEQ, - ENTRY_TXD_FIRST_FRAGMENT, - ENTRY_TXD_MORE_FRAG, - ENTRY_TXD_REQ_TIMESTAMP, - ENTRY_TXD_BURST, - ENTRY_TXD_ACK, - ENTRY_TXD_RETRY_MODE, - ENTRY_TXD_ENCRYPT, - ENTRY_TXD_ENCRYPT_PAIRWISE, - ENTRY_TXD_ENCRYPT_IV, - ENTRY_TXD_ENCRYPT_MMIC, - ENTRY_TXD_HT_AMPDU, - ENTRY_TXD_HT_BW_40, - ENTRY_TXD_HT_SHORT_GI, - ENTRY_TXD_HT_MIMO_PS, -}; - -/** - * struct txentry_desc: TX Entry descriptor - * - * Summary of information for the frame descriptor before sending a TX frame. - * - * @flags: Descriptor flags (See &enum queue_entry_flags). - * @length: Length of the entire frame. - * @header_length: Length of 802.11 header. - * @length_high: PLCP length high word. - * @length_low: PLCP length low word. - * @signal: PLCP signal. - * @service: PLCP service. - * @msc: MCS. - * @stbc: Use Space Time Block Coding (only available for MCS rates < 8). - * @ba_size: Size of the recepients RX reorder buffer - 1. - * @rate_mode: Rate mode (See @enum rate_modulation). - * @mpdu_density: MDPU density. - * @retry_limit: Max number of retries. - * @ifs: IFS value. - * @txop: IFS value for 11n capable chips. - * @cipher: Cipher type used for encryption. - * @key_idx: Key index used for encryption. - * @iv_offset: Position where IV should be inserted by hardware. - * @iv_len: Length of IV data. - */ -struct txentry_desc { - unsigned long flags; - - u16 length; - u16 header_length; - - union { - struct { - u16 length_high; - u16 length_low; - u16 signal; - u16 service; - enum ifs ifs; - } plcp; - - struct { - u16 mcs; - u8 stbc; - u8 ba_size; - u8 mpdu_density; - enum txop txop; - int wcid; - } ht; - } u; - - enum rate_modulation rate_mode; - - short retry_limit; - - enum cipher cipher; - u16 key_idx; - u16 iv_offset; - u16 iv_len; -}; - -/** - * enum queue_entry_flags: Status flags for queue entry - * - * @ENTRY_BCN_ASSIGNED: This entry has been assigned to an interface. - * As long as this bit is set, this entry may only be touched - * through the interface structure. - * @ENTRY_OWNER_DEVICE_DATA: This entry is owned by the device for data - * transfer (either TX or RX depending on the queue). The entry should - * only be touched after the device has signaled it is done with it. - * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting - * for the signal to start sending. - * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occurred - * while transferring the data to the hardware. No TX status report will - * be expected from the hardware. - * @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and - * returned. It is now waiting for the status reporting before the - * entry can be reused again. - */ -enum queue_entry_flags { - ENTRY_BCN_ASSIGNED, - ENTRY_BCN_ENABLED, - ENTRY_OWNER_DEVICE_DATA, - ENTRY_DATA_PENDING, - ENTRY_DATA_IO_FAILED, - ENTRY_DATA_STATUS_PENDING, - ENTRY_DATA_STATUS_SET, -}; - -/** - * struct queue_entry: Entry inside the &struct data_queue - * - * @flags: Entry flags, see &enum queue_entry_flags. - * @last_action: Timestamp of last change. - * @queue: The data queue (&struct data_queue) to which this entry belongs. - * @skb: The buffer which is currently being transmitted (for TX queue), - * or used to directly receive data in (for RX queue). - * @entry_idx: The entry index number. - * @priv_data: Private data belonging to this queue entry. The pointer - * points to data specific to a particular driver and queue type. - * @status: Device specific status - */ -struct queue_entry { - unsigned long flags; - unsigned long last_action; - - struct data_queue *queue; - - struct sk_buff *skb; - - unsigned int entry_idx; - - u32 status; - - void *priv_data; -}; - -/** - * enum queue_index: Queue index type - * - * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is - * owned by the hardware then the queue is considered to be full. - * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been - * transferred to the hardware. - * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by - * the hardware and for which we need to run the txdone handler. If this - * entry is not owned by the hardware the queue is considered to be empty. - * @Q_INDEX_MAX: Keep last, used in &struct data_queue to determine the size - * of the index array. - */ -enum queue_index { - Q_INDEX, - Q_INDEX_DMA_DONE, - Q_INDEX_DONE, - Q_INDEX_MAX, -}; - -/** - * enum data_queue_flags: Status flags for data queues - * - * @QUEUE_STARTED: The queue has been started. Fox RX queues this means the - * device might be DMA'ing skbuffers. TX queues will accept skbuffers to - * be transmitted and beacon queues will start beaconing the configured - * beacons. - * @QUEUE_PAUSED: The queue has been started but is currently paused. - * When this bit is set, the queue has been stopped in mac80211, - * preventing new frames to be enqueued. However, a few frames - * might still appear shortly after the pausing... - */ -enum data_queue_flags { - QUEUE_STARTED, - QUEUE_PAUSED, -}; - -/** - * struct data_queue: Data queue - * - * @rt2x00dev: Pointer to main &struct rt2x00dev where this queue belongs to. - * @entries: Base address of the &struct queue_entry which are - * part of this queue. - * @qid: The queue identification, see &enum data_queue_qid. - * @flags: Entry flags, see &enum queue_entry_flags. - * @status_lock: The mutex for protecting the start/stop/flush - * handling on this queue. - * @tx_lock: Spinlock to serialize tx operations on this queue. - * @index_lock: Spinlock to protect index handling. Whenever @index, @index_done or - * @index_crypt needs to be changed this lock should be grabbed to prevent - * index corruption due to concurrency. - * @count: Number of frames handled in the queue. - * @limit: Maximum number of entries in the queue. - * @threshold: Minimum number of free entries before queue is kicked by force. - * @length: Number of frames in queue. - * @index: Index pointers to entry positions in the queue, - * use &enum queue_index to get a specific index field. - * @txop: maximum burst time. - * @aifs: The aifs value for outgoing frames (field ignored in RX queue). - * @cw_min: The cw min value for outgoing frames (field ignored in RX queue). - * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). - * @data_size: Maximum data size for the frames in this queue. - * @desc_size: Hardware descriptor size for the data in this queue. - * @priv_size: Size of per-queue_entry private data. - * @usb_endpoint: Device endpoint used for communication (USB only) - * @usb_maxpacket: Max packet size for given endpoint (USB only) - */ -struct data_queue { - struct rt2x00_dev *rt2x00dev; - struct queue_entry *entries; - - enum data_queue_qid qid; - unsigned long flags; - - struct mutex status_lock; - spinlock_t tx_lock; - spinlock_t index_lock; - - unsigned int count; - unsigned short limit; - unsigned short threshold; - unsigned short length; - unsigned short index[Q_INDEX_MAX]; - - unsigned short txop; - unsigned short aifs; - unsigned short cw_min; - unsigned short cw_max; - - unsigned short data_size; - unsigned char desc_size; - unsigned char winfo_size; - unsigned short priv_size; - - unsigned short usb_endpoint; - unsigned short usb_maxpacket; -}; - -/** - * queue_end - Return pointer to the last queue (HELPER MACRO). - * @__dev: Pointer to &struct rt2x00_dev - * - * Using the base rx pointer and the maximum number of available queues, - * this macro will return the address of 1 position beyond the end of the - * queues array. - */ -#define queue_end(__dev) \ - &(__dev)->rx[(__dev)->data_queues] - -/** - * tx_queue_end - Return pointer to the last TX queue (HELPER MACRO). - * @__dev: Pointer to &struct rt2x00_dev - * - * Using the base tx pointer and the maximum number of available TX - * queues, this macro will return the address of 1 position beyond - * the end of the TX queue array. - */ -#define tx_queue_end(__dev) \ - &(__dev)->tx[(__dev)->ops->tx_queues] - -/** - * queue_next - Return pointer to next queue in list (HELPER MACRO). - * @__queue: Current queue for which we need the next queue - * - * Using the current queue address we take the address directly - * after the queue to take the next queue. Note that this macro - * should be used carefully since it does not protect against - * moving past the end of the list. (See macros &queue_end and - * &tx_queue_end for determining the end of the queue). - */ -#define queue_next(__queue) \ - &(__queue)[1] - -/** - * queue_loop - Loop through the queues within a specific range (HELPER MACRO). - * @__entry: Pointer where the current queue entry will be stored in. - * @__start: Start queue pointer. - * @__end: End queue pointer. - * - * This macro will loop through all queues between &__start and &__end. - */ -#define queue_loop(__entry, __start, __end) \ - for ((__entry) = (__start); \ - prefetch(queue_next(__entry)), (__entry) != (__end);\ - (__entry) = queue_next(__entry)) - -/** - * queue_for_each - Loop through all queues - * @__dev: Pointer to &struct rt2x00_dev - * @__entry: Pointer where the current queue entry will be stored in. - * - * This macro will loop through all available queues. - */ -#define queue_for_each(__dev, __entry) \ - queue_loop(__entry, (__dev)->rx, queue_end(__dev)) - -/** - * tx_queue_for_each - Loop through the TX queues - * @__dev: Pointer to &struct rt2x00_dev - * @__entry: Pointer where the current queue entry will be stored in. - * - * This macro will loop through all TX related queues excluding - * the Beacon and Atim queues. - */ -#define tx_queue_for_each(__dev, __entry) \ - queue_loop(__entry, (__dev)->tx, tx_queue_end(__dev)) - -/** - * txall_queue_for_each - Loop through all TX related queues - * @__dev: Pointer to &struct rt2x00_dev - * @__entry: Pointer where the current queue entry will be stored in. - * - * This macro will loop through all TX related queues including - * the Beacon and Atim queues. - */ -#define txall_queue_for_each(__dev, __entry) \ - queue_loop(__entry, (__dev)->tx, queue_end(__dev)) - -/** - * rt2x00queue_for_each_entry - Loop through all entries in the queue - * @queue: Pointer to @data_queue - * @start: &enum queue_index Pointer to start index - * @end: &enum queue_index Pointer to end index - * @data: Data to pass to the callback function - * @fn: The function to call for each &struct queue_entry - * - * This will walk through all entries in the queue, in chronological - * order. This means it will start at the current @start pointer - * and will walk through the queue until it reaches the @end pointer. - * - * If fn returns true for an entry rt2x00queue_for_each_entry will stop - * processing and return true as well. - */ -bool rt2x00queue_for_each_entry(struct data_queue *queue, - enum queue_index start, - enum queue_index end, - void *data, - bool (*fn)(struct queue_entry *entry, - void *data)); - -/** - * rt2x00queue_empty - Check if the queue is empty. - * @queue: Queue to check if empty. - */ -static inline int rt2x00queue_empty(struct data_queue *queue) -{ - return queue->length == 0; -} - -/** - * rt2x00queue_full - Check if the queue is full. - * @queue: Queue to check if full. - */ -static inline int rt2x00queue_full(struct data_queue *queue) -{ - return queue->length == queue->limit; -} - -/** - * rt2x00queue_free - Check the number of available entries in queue. - * @queue: Queue to check. - */ -static inline int rt2x00queue_available(struct data_queue *queue) -{ - return queue->limit - queue->length; -} - -/** - * rt2x00queue_threshold - Check if the queue is below threshold - * @queue: Queue to check. - */ -static inline int rt2x00queue_threshold(struct data_queue *queue) -{ - return rt2x00queue_available(queue) < queue->threshold; -} -/** - * rt2x00queue_dma_timeout - Check if a timeout occurred for DMA transfers - * @entry: Queue entry to check. - */ -static inline int rt2x00queue_dma_timeout(struct queue_entry *entry) -{ - if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) - return false; - return time_after(jiffies, entry->last_action + msecs_to_jiffies(100)); -} - -/** - * _rt2x00_desc_read - Read a word from the hardware descriptor. - * @desc: Base descriptor address - * @word: Word index from where the descriptor should be read. - * @value: Address where the descriptor value should be written into. - */ -static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value) -{ - *value = desc[word]; -} - -/** - * rt2x00_desc_read - Read a word from the hardware descriptor, this - * function will take care of the byte ordering. - * @desc: Base descriptor address - * @word: Word index from where the descriptor should be read. - * @value: Address where the descriptor value should be written into. - */ -static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value) -{ - __le32 tmp; - _rt2x00_desc_read(desc, word, &tmp); - *value = le32_to_cpu(tmp); -} - -/** - * rt2x00_desc_write - write a word to the hardware descriptor, this - * function will take care of the byte ordering. - * @desc: Base descriptor address - * @word: Word index from where the descriptor should be written. - * @value: Value that should be written into the descriptor. - */ -static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value) -{ - desc[word] = value; -} - -/** - * rt2x00_desc_write - write a word to the hardware descriptor. - * @desc: Base descriptor address - * @word: Word index from where the descriptor should be written. - * @value: Value that should be written into the descriptor. - */ -static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value) -{ - _rt2x00_desc_write(desc, word, cpu_to_le32(value)); -} - -#endif /* RT2X00QUEUE_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h deleted file mode 100644 index 3cc541d13d67..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ /dev/null @@ -1,277 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00 - Abstract: rt2x00 generic register information. - */ - -#ifndef RT2X00REG_H -#define RT2X00REG_H - -/* - * RX crypto status - */ -enum rx_crypto { - RX_CRYPTO_SUCCESS = 0, - RX_CRYPTO_FAIL_ICV = 1, - RX_CRYPTO_FAIL_MIC = 2, - RX_CRYPTO_FAIL_KEY = 3, -}; - -/* - * Antenna values - */ -enum antenna { - ANTENNA_SW_DIVERSITY = 0, - ANTENNA_A = 1, - ANTENNA_B = 2, - ANTENNA_HW_DIVERSITY = 3, -}; - -/* - * Led mode values. - */ -enum led_mode { - LED_MODE_DEFAULT = 0, - LED_MODE_TXRX_ACTIVITY = 1, - LED_MODE_SIGNAL_STRENGTH = 2, - LED_MODE_ASUS = 3, - LED_MODE_ALPHA = 4, -}; - -/* - * TSF sync values - */ -enum tsf_sync { - TSF_SYNC_NONE = 0, - TSF_SYNC_INFRA = 1, - TSF_SYNC_ADHOC = 2, - TSF_SYNC_AP_NONE = 3, -}; - -/* - * Device states - */ -enum dev_state { - STATE_DEEP_SLEEP = 0, - STATE_SLEEP = 1, - STATE_STANDBY = 2, - STATE_AWAKE = 3, - -/* - * Additional device states, these values are - * not strict since they are not directly passed - * into the device. - */ - STATE_RADIO_ON, - STATE_RADIO_OFF, - STATE_RADIO_IRQ_ON, - STATE_RADIO_IRQ_OFF, -}; - -/* - * IFS backoff values - */ -enum ifs { - IFS_BACKOFF = 0, - IFS_SIFS = 1, - IFS_NEW_BACKOFF = 2, - IFS_NONE = 3, -}; - -/* - * IFS backoff values for HT devices - */ -enum txop { - TXOP_HTTXOP = 0, - TXOP_PIFS = 1, - TXOP_SIFS = 2, - TXOP_BACKOFF = 3, -}; - -/* - * Cipher types for hardware encryption - */ -enum cipher { - CIPHER_NONE = 0, - CIPHER_WEP64 = 1, - CIPHER_WEP128 = 2, - CIPHER_TKIP = 3, - CIPHER_AES = 4, -/* - * The following fields were added by rt61pci and rt73usb. - */ - CIPHER_CKIP64 = 5, - CIPHER_CKIP128 = 6, - CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */ - -/* - * Max cipher type. - * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128 - * are excluded due to limitations in mac80211. - */ - CIPHER_MAX = 4, -}; - -/* - * Rate modulations - */ -enum rate_modulation { - RATE_MODE_CCK = 0, - RATE_MODE_OFDM = 1, - RATE_MODE_HT_MIX = 2, - RATE_MODE_HT_GREENFIELD = 3, -}; - -/* - * Firmware validation error codes - */ -enum firmware_errors { - FW_OK, - FW_BAD_CRC, - FW_BAD_LENGTH, - FW_BAD_VERSION, -}; - -/* - * Register handlers. - * We store the position of a register field inside a field structure, - * This will simplify the process of setting and reading a certain field - * inside the register while making sure the process remains byte order safe. - */ -struct rt2x00_field8 { - u8 bit_offset; - u8 bit_mask; -}; - -struct rt2x00_field16 { - u16 bit_offset; - u16 bit_mask; -}; - -struct rt2x00_field32 { - u32 bit_offset; - u32 bit_mask; -}; - -/* - * Power of two check, this will check - * if the mask that has been given contains and contiguous set of bits. - * Note that we cannot use the is_power_of_2() function since this - * check must be done at compile-time. - */ -#define is_power_of_two(x) ( !((x) & ((x)-1)) ) -#define low_bit_mask(x) ( ((x)-1) & ~(x) ) -#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x)) - -/* - * Macros to find first set bit in a variable. - * These macros behave the same as the __ffs() functions but - * the most important difference that this is done during - * compile-time rather then run-time. - */ -#define compile_ffs2(__x) \ - __builtin_choose_expr(((__x) & 0x1), 0, 1) - -#define compile_ffs4(__x) \ - __builtin_choose_expr(((__x) & 0x3), \ - (compile_ffs2((__x))), \ - (compile_ffs2((__x) >> 2) + 2)) - -#define compile_ffs8(__x) \ - __builtin_choose_expr(((__x) & 0xf), \ - (compile_ffs4((__x))), \ - (compile_ffs4((__x) >> 4) + 4)) - -#define compile_ffs16(__x) \ - __builtin_choose_expr(((__x) & 0xff), \ - (compile_ffs8((__x))), \ - (compile_ffs8((__x) >> 8) + 8)) - -#define compile_ffs32(__x) \ - __builtin_choose_expr(((__x) & 0xffff), \ - (compile_ffs16((__x))), \ - (compile_ffs16((__x) >> 16) + 16)) - -/* - * This macro will check the requirements for the FIELD{8,16,32} macros - * The mask should be a constant non-zero contiguous set of bits which - * does not exceed the given typelimit. - */ -#define FIELD_CHECK(__mask, __type) \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (__type)(__mask)) \ - -#define FIELD8(__mask) \ -({ \ - FIELD_CHECK(__mask, u8); \ - (struct rt2x00_field8) { \ - compile_ffs8(__mask), (__mask) \ - }; \ -}) - -#define FIELD16(__mask) \ -({ \ - FIELD_CHECK(__mask, u16); \ - (struct rt2x00_field16) { \ - compile_ffs16(__mask), (__mask) \ - }; \ -}) - -#define FIELD32(__mask) \ -({ \ - FIELD_CHECK(__mask, u32); \ - (struct rt2x00_field32) { \ - compile_ffs32(__mask), (__mask) \ - }; \ -}) - -#define SET_FIELD(__reg, __type, __field, __value)\ -({ \ - typecheck(__type, __field); \ - *(__reg) &= ~((__field).bit_mask); \ - *(__reg) |= ((__value) << \ - ((__field).bit_offset)) & \ - ((__field).bit_mask); \ -}) - -#define GET_FIELD(__reg, __type, __field) \ -({ \ - typecheck(__type, __field); \ - ((__reg) & ((__field).bit_mask)) >> \ - ((__field).bit_offset); \ -}) - -#define rt2x00_set_field32(__reg, __field, __value) \ - SET_FIELD(__reg, struct rt2x00_field32, __field, __value) -#define rt2x00_get_field32(__reg, __field) \ - GET_FIELD(__reg, struct rt2x00_field32, __field) - -#define rt2x00_set_field16(__reg, __field, __value) \ - SET_FIELD(__reg, struct rt2x00_field16, __field, __value) -#define rt2x00_get_field16(__reg, __field) \ - GET_FIELD(__reg, struct rt2x00_field16, __field) - -#define rt2x00_set_field8(__reg, __field, __value) \ - SET_FIELD(__reg, struct rt2x00_field8, __field, __value) -#define rt2x00_get_field8(__reg, __field) \ - GET_FIELD(__reg, struct rt2x00_field8, __field) - -#endif /* RT2X00REG_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c deleted file mode 100644 index 69a0cdadb07f..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00soc.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - Copyright (C) 2004 - 2009 Felix Fietkau <nbd@openwrt.org> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00soc - Abstract: rt2x00 generic soc device routines. - */ - -#include <linux/bug.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include "rt2x00.h" -#include "rt2x00soc.h" - -static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rf); - rt2x00dev->rf = NULL; - - kfree(rt2x00dev->eeprom); - rt2x00dev->eeprom = NULL; - - iounmap(rt2x00dev->csr.base); -} - -static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev) -{ - struct platform_device *pdev = to_platform_device(rt2x00dev->dev); - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - rt2x00dev->csr.base = ioremap(res->start, resource_size(res)); - if (!rt2x00dev->csr.base) - return -ENOMEM; - - rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); - if (!rt2x00dev->eeprom) - goto exit; - - rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); - if (!rt2x00dev->rf) - goto exit; - - return 0; - -exit: - rt2x00_probe_err("Failed to allocate registers\n"); - rt2x00soc_free_reg(rt2x00dev); - - return -ENOMEM; -} - -int rt2x00soc_probe(struct platform_device *pdev, const struct rt2x00_ops *ops) -{ - struct ieee80211_hw *hw; - struct rt2x00_dev *rt2x00dev; - int retval; - - hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); - if (!hw) { - rt2x00_probe_err("Failed to allocate hardware\n"); - return -ENOMEM; - } - - platform_set_drvdata(pdev, hw); - - rt2x00dev = hw->priv; - rt2x00dev->dev = &pdev->dev; - rt2x00dev->ops = ops; - rt2x00dev->hw = hw; - rt2x00dev->irq = platform_get_irq(pdev, 0); - rt2x00dev->name = pdev->dev.driver->name; - - rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC); - - retval = rt2x00soc_alloc_reg(rt2x00dev); - if (retval) - goto exit_free_device; - - retval = rt2x00lib_probe_dev(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00soc_free_reg(rt2x00dev); - -exit_free_device: - ieee80211_free_hw(hw); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00soc_probe); - -int rt2x00soc_remove(struct platform_device *pdev) -{ - struct ieee80211_hw *hw = platform_get_drvdata(pdev); - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Free all allocated data. - */ - rt2x00lib_remove_dev(rt2x00dev); - rt2x00soc_free_reg(rt2x00dev); - ieee80211_free_hw(hw); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00soc_remove); - -#ifdef CONFIG_PM -int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct ieee80211_hw *hw = platform_get_drvdata(pdev); - struct rt2x00_dev *rt2x00dev = hw->priv; - - return rt2x00lib_suspend(rt2x00dev, state); -} -EXPORT_SYMBOL_GPL(rt2x00soc_suspend); - -int rt2x00soc_resume(struct platform_device *pdev) -{ - struct ieee80211_hw *hw = platform_get_drvdata(pdev); - struct rt2x00_dev *rt2x00dev = hw->priv; - - return rt2x00lib_resume(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00soc_resume); -#endif /* CONFIG_PM */ - -/* - * rt2x00soc module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 soc library"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h deleted file mode 100644 index 9948d355e9a4..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00soc.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00soc - Abstract: Data structures for the rt2x00soc module. - */ - -#ifndef RT2X00SOC_H -#define RT2X00SOC_H - -/* - * SoC driver handlers. - */ -int rt2x00soc_probe(struct platform_device *pdev, const struct rt2x00_ops *ops); -int rt2x00soc_remove(struct platform_device *pdev); -#ifdef CONFIG_PM -int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state); -int rt2x00soc_resume(struct platform_device *pdev); -#else -#define rt2x00soc_suspend NULL -#define rt2x00soc_resume NULL -#endif /* CONFIG_PM */ - -#endif /* RT2X00SOC_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c deleted file mode 100644 index 7627af6098eb..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ /dev/null @@ -1,884 +0,0 @@ -/* - Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> - Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00usb - Abstract: rt2x00 generic usb device routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/usb.h> -#include <linux/bug.h> - -#include "rt2x00.h" -#include "rt2x00usb.h" - -/* - * Interfacing with the HW. - */ -int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, const u16 value, - void *buffer, const u16 buffer_length, - const int timeout) -{ - struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); - int status; - unsigned int pipe = - (requesttype == USB_VENDOR_REQUEST_IN) ? - usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); - unsigned long expire = jiffies + msecs_to_jiffies(timeout); - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return -ENODEV; - - do { - status = usb_control_msg(usb_dev, pipe, request, requesttype, - value, offset, buffer, buffer_length, - timeout / 2); - if (status >= 0) - return 0; - - if (status == -ENODEV) { - /* Device has disappeared. */ - clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - break; - } - } while (time_before(jiffies, expire)); - - rt2x00_err(rt2x00dev, - "Vendor Request 0x%02x failed for offset 0x%04x with error %d\n", - request, offset, status); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request); - -int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, void *buffer, - const u16 buffer_length, const int timeout) -{ - int status; - - BUG_ON(!mutex_is_locked(&rt2x00dev->csr_mutex)); - - /* - * Check for Cache availability. - */ - if (unlikely(!rt2x00dev->csr.cache || buffer_length > CSR_CACHE_SIZE)) { - rt2x00_err(rt2x00dev, "CSR cache not available\n"); - return -ENOMEM; - } - - if (requesttype == USB_VENDOR_REQUEST_OUT) - memcpy(rt2x00dev->csr.cache, buffer, buffer_length); - - status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, - offset, 0, rt2x00dev->csr.cache, - buffer_length, timeout); - - if (!status && requesttype == USB_VENDOR_REQUEST_IN) - memcpy(buffer, rt2x00dev->csr.cache, buffer_length); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_vendor_req_buff_lock); - -int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, void *buffer, - const u16 buffer_length) -{ - int status = 0; - unsigned char *tb; - u16 off, len, bsize; - - mutex_lock(&rt2x00dev->csr_mutex); - - tb = (char *)buffer; - off = offset; - len = buffer_length; - while (len && !status) { - bsize = min_t(u16, CSR_CACHE_SIZE, len); - status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, - requesttype, off, tb, - bsize, REGISTER_TIMEOUT); - - tb += bsize; - len -= bsize; - off += bsize; - } - - mutex_unlock(&rt2x00dev->csr_mutex); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); - -int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg) -{ - unsigned int i; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return -ENODEV; - - for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) { - rt2x00usb_register_read_lock(rt2x00dev, offset, reg); - if (!rt2x00_get_field32(*reg, field)) - return 1; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "Indirect register access failed: offset=0x%.08x, value=0x%.08x\n", - offset, *reg); - *reg = ~0; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read); - - -struct rt2x00_async_read_data { - __le32 reg; - struct usb_ctrlrequest cr; - struct rt2x00_dev *rt2x00dev; - bool (*callback)(struct rt2x00_dev *, int, u32); -}; - -static void rt2x00usb_register_read_async_cb(struct urb *urb) -{ - struct rt2x00_async_read_data *rd = urb->context; - if (rd->callback(rd->rt2x00dev, urb->status, le32_to_cpu(rd->reg))) { - if (usb_submit_urb(urb, GFP_ATOMIC) < 0) - kfree(rd); - } else - kfree(rd); -} - -void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - bool (*callback)(struct rt2x00_dev*, int, u32)) -{ - struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); - struct urb *urb; - struct rt2x00_async_read_data *rd; - - rd = kmalloc(sizeof(*rd), GFP_ATOMIC); - if (!rd) - return; - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - kfree(rd); - return; - } - - rd->rt2x00dev = rt2x00dev; - rd->callback = callback; - rd->cr.bRequestType = USB_VENDOR_REQUEST_IN; - rd->cr.bRequest = USB_MULTI_READ; - rd->cr.wValue = 0; - rd->cr.wIndex = cpu_to_le16(offset); - rd->cr.wLength = cpu_to_le16(sizeof(u32)); - - usb_fill_control_urb(urb, usb_dev, usb_rcvctrlpipe(usb_dev, 0), - (unsigned char *)(&rd->cr), &rd->reg, sizeof(rd->reg), - rt2x00usb_register_read_async_cb, rd); - if (usb_submit_urb(urb, GFP_ATOMIC) < 0) - kfree(rd); - usb_free_urb(urb); -} -EXPORT_SYMBOL_GPL(rt2x00usb_register_read_async); - -/* - * TX data handlers. - */ -static void rt2x00usb_work_txdone_entry(struct queue_entry *entry) -{ - /* - * If the transfer to hardware succeeded, it does not mean the - * frame was send out correctly. It only means the frame - * was successfully pushed to the hardware, we have no - * way to determine the transmission status right now. - * (Only indirectly by looking at the failed TX counters - * in the register). - */ - if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) - rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); - else - rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN); -} - -static void rt2x00usb_work_txdone(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, txdone_work); - struct data_queue *queue; - struct queue_entry *entry; - - tx_queue_for_each(rt2x00dev, queue) { - while (!rt2x00queue_empty(queue)) { - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - - if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || - !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) - break; - - rt2x00usb_work_txdone_entry(entry); - } - } -} - -static void rt2x00usb_interrupt_txdone(struct urb *urb) -{ - struct queue_entry *entry = (struct queue_entry *)urb->context; - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - - if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) - return; - /* - * Check if the frame was correctly uploaded - */ - if (urb->status) - set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); - /* - * Report the frame as DMA done - */ - rt2x00lib_dmadone(entry); - - if (rt2x00dev->ops->lib->tx_dma_done) - rt2x00dev->ops->lib->tx_dma_done(entry); - /* - * Schedule the delayed work for reading the TX status - * from the device. - */ - if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TXSTATUS_FIFO) || - !kfifo_is_empty(&rt2x00dev->txstatus_fifo)) - queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work); -} - -static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void *data) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); - struct queue_entry_priv_usb *entry_priv = entry->priv_data; - u32 length; - int status; - - if (!test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags) || - test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) - return false; - - /* - * USB devices require certain padding at the end of each frame - * and urb. Those paddings are not included in skbs. Pass entry - * to the driver to determine what the overall length should be. - */ - length = rt2x00dev->ops->lib->get_tx_data_len(entry); - - status = skb_padto(entry->skb, length); - if (unlikely(status)) { - /* TODO: report something more appropriate than IO_FAILED. */ - rt2x00_warn(rt2x00dev, "TX SKB padding error, out of memory\n"); - set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); - rt2x00lib_dmadone(entry); - - return false; - } - - usb_fill_bulk_urb(entry_priv->urb, usb_dev, - usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint), - entry->skb->data, length, - rt2x00usb_interrupt_txdone, entry); - - status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC); - if (status) { - if (status == -ENODEV) - clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); - rt2x00lib_dmadone(entry); - } - - return false; -} - -/* - * RX data handlers. - */ -static void rt2x00usb_work_rxdone(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, rxdone_work); - struct queue_entry *entry; - struct skb_frame_desc *skbdesc; - u8 rxd[32]; - - while (!rt2x00queue_empty(rt2x00dev->rx)) { - entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE); - - if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || - !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) - break; - - /* - * Fill in desc fields of the skb descriptor - */ - skbdesc = get_skb_frame_desc(entry->skb); - skbdesc->desc = rxd; - skbdesc->desc_len = entry->queue->desc_size; - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, GFP_KERNEL); - } -} - -static void rt2x00usb_interrupt_rxdone(struct urb *urb) -{ - struct queue_entry *entry = (struct queue_entry *)urb->context; - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - - if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) - return; - - /* - * Report the frame as DMA done - */ - rt2x00lib_dmadone(entry); - - /* - * Check if the received data is simply too small - * to be actually valid, or if the urb is signaling - * a problem. - */ - if (urb->actual_length < entry->queue->desc_size || urb->status) - set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); - - /* - * Schedule the delayed work for reading the RX status - * from the device. - */ - queue_work(rt2x00dev->workqueue, &rt2x00dev->rxdone_work); -} - -static bool rt2x00usb_kick_rx_entry(struct queue_entry *entry, void *data) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); - struct queue_entry_priv_usb *entry_priv = entry->priv_data; - int status; - - if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || - test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) - return false; - - rt2x00lib_dmastart(entry); - - usb_fill_bulk_urb(entry_priv->urb, usb_dev, - usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint), - entry->skb->data, entry->skb->len, - rt2x00usb_interrupt_rxdone, entry); - - status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC); - if (status) { - if (status == -ENODEV) - clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); - rt2x00lib_dmadone(entry); - } - - return false; -} - -void rt2x00usb_kick_queue(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - if (!rt2x00queue_empty(queue)) - rt2x00queue_for_each_entry(queue, - Q_INDEX_DONE, - Q_INDEX, - NULL, - rt2x00usb_kick_tx_entry); - break; - case QID_RX: - if (!rt2x00queue_full(queue)) - rt2x00queue_for_each_entry(queue, - Q_INDEX, - Q_INDEX_DONE, - NULL, - rt2x00usb_kick_rx_entry); - break; - default: - break; - } -} -EXPORT_SYMBOL_GPL(rt2x00usb_kick_queue); - -static bool rt2x00usb_flush_entry(struct queue_entry *entry, void *data) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct queue_entry_priv_usb *entry_priv = entry->priv_data; - struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; - - if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) - return false; - - usb_kill_urb(entry_priv->urb); - - /* - * Kill guardian urb (if required by driver). - */ - if ((entry->queue->qid == QID_BEACON) && - (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_BEACON_GUARD))) - usb_kill_urb(bcn_priv->guardian_urb); - - return false; -} - -void rt2x00usb_flush_queue(struct data_queue *queue, bool drop) -{ - struct work_struct *completion; - unsigned int i; - - if (drop) - rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX, NULL, - rt2x00usb_flush_entry); - - /* - * Obtain the queue completion handler - */ - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - completion = &queue->rt2x00dev->txdone_work; - break; - case QID_RX: - completion = &queue->rt2x00dev->rxdone_work; - break; - default: - return; - } - - for (i = 0; i < 10; i++) { - /* - * Check if the driver is already done, otherwise we - * have to sleep a little while to give the driver/hw - * the oppurtunity to complete interrupt process itself. - */ - if (rt2x00queue_empty(queue)) - break; - - /* - * Schedule the completion handler manually, when this - * worker function runs, it should cleanup the queue. - */ - queue_work(queue->rt2x00dev->workqueue, completion); - - /* - * Wait for a little while to give the driver - * the oppurtunity to recover itself. - */ - msleep(10); - } -} -EXPORT_SYMBOL_GPL(rt2x00usb_flush_queue); - -static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue) -{ - rt2x00_warn(queue->rt2x00dev, "TX queue %d DMA timed out, invoke forced forced reset\n", - queue->qid); - - rt2x00queue_stop_queue(queue); - rt2x00queue_flush_queue(queue, true); - rt2x00queue_start_queue(queue); -} - -static int rt2x00usb_dma_timeout(struct data_queue *queue) -{ - struct queue_entry *entry; - - entry = rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE); - return rt2x00queue_dma_timeout(entry); -} - -void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - tx_queue_for_each(rt2x00dev, queue) { - if (!rt2x00queue_empty(queue)) { - if (rt2x00usb_dma_timeout(queue)) - rt2x00usb_watchdog_tx_dma(queue); - } - } -} -EXPORT_SYMBOL_GPL(rt2x00usb_watchdog); - -/* - * Radio handlers - */ -void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, - REGISTER_TIMEOUT); -} -EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); - -/* - * Device initialization handlers. - */ -void rt2x00usb_clear_entry(struct queue_entry *entry) -{ - entry->flags = 0; - - if (entry->queue->qid == QID_RX) - rt2x00usb_kick_rx_entry(entry, NULL); -} -EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry); - -static void rt2x00usb_assign_endpoint(struct data_queue *queue, - struct usb_endpoint_descriptor *ep_desc) -{ - struct usb_device *usb_dev = to_usb_device_intf(queue->rt2x00dev->dev); - int pipe; - - queue->usb_endpoint = usb_endpoint_num(ep_desc); - - if (queue->qid == QID_RX) { - pipe = usb_rcvbulkpipe(usb_dev, queue->usb_endpoint); - queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 0); - } else { - pipe = usb_sndbulkpipe(usb_dev, queue->usb_endpoint); - queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 1); - } - - if (!queue->usb_maxpacket) - queue->usb_maxpacket = 1; -} - -static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev) -{ - struct usb_interface *intf = to_usb_interface(rt2x00dev->dev); - struct usb_host_interface *intf_desc = intf->cur_altsetting; - struct usb_endpoint_descriptor *ep_desc; - struct data_queue *queue = rt2x00dev->tx; - struct usb_endpoint_descriptor *tx_ep_desc = NULL; - unsigned int i; - - /* - * Walk through all available endpoints to search for "bulk in" - * and "bulk out" endpoints. When we find such endpoints collect - * the information we need from the descriptor and assign it - * to the queue. - */ - for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) { - ep_desc = &intf_desc->endpoint[i].desc; - - if (usb_endpoint_is_bulk_in(ep_desc)) { - rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc); - } else if (usb_endpoint_is_bulk_out(ep_desc) && - (queue != queue_end(rt2x00dev))) { - rt2x00usb_assign_endpoint(queue, ep_desc); - queue = queue_next(queue); - - tx_ep_desc = ep_desc; - } - } - - /* - * At least 1 endpoint for RX and 1 endpoint for TX must be available. - */ - if (!rt2x00dev->rx->usb_endpoint || !rt2x00dev->tx->usb_endpoint) { - rt2x00_err(rt2x00dev, "Bulk-in/Bulk-out endpoints not found\n"); - return -EPIPE; - } - - /* - * It might be possible not all queues have a dedicated endpoint. - * Loop through all TX queues and copy the endpoint information - * which we have gathered from already assigned endpoints. - */ - txall_queue_for_each(rt2x00dev, queue) { - if (!queue->usb_endpoint) - rt2x00usb_assign_endpoint(queue, tx_ep_desc); - } - - return 0; -} - -static int rt2x00usb_alloc_entries(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - struct queue_entry_priv_usb *entry_priv; - struct queue_entry_priv_usb_bcn *bcn_priv; - unsigned int i; - - for (i = 0; i < queue->limit; i++) { - entry_priv = queue->entries[i].priv_data; - entry_priv->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!entry_priv->urb) - return -ENOMEM; - } - - /* - * If this is not the beacon queue or - * no guardian byte was required for the beacon, - * then we are done. - */ - if (queue->qid != QID_BEACON || - !rt2x00_has_cap_flag(rt2x00dev, REQUIRE_BEACON_GUARD)) - return 0; - - for (i = 0; i < queue->limit; i++) { - bcn_priv = queue->entries[i].priv_data; - bcn_priv->guardian_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!bcn_priv->guardian_urb) - return -ENOMEM; - } - - return 0; -} - -static void rt2x00usb_free_entries(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - struct queue_entry_priv_usb *entry_priv; - struct queue_entry_priv_usb_bcn *bcn_priv; - unsigned int i; - - if (!queue->entries) - return; - - for (i = 0; i < queue->limit; i++) { - entry_priv = queue->entries[i].priv_data; - usb_kill_urb(entry_priv->urb); - usb_free_urb(entry_priv->urb); - } - - /* - * If this is not the beacon queue or - * no guardian byte was required for the beacon, - * then we are done. - */ - if (queue->qid != QID_BEACON || - !rt2x00_has_cap_flag(rt2x00dev, REQUIRE_BEACON_GUARD)) - return; - - for (i = 0; i < queue->limit; i++) { - bcn_priv = queue->entries[i].priv_data; - usb_kill_urb(bcn_priv->guardian_urb); - usb_free_urb(bcn_priv->guardian_urb); - } -} - -int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - int status; - - /* - * Find endpoints for each queue - */ - status = rt2x00usb_find_endpoints(rt2x00dev); - if (status) - goto exit; - - /* - * Allocate DMA - */ - queue_for_each(rt2x00dev, queue) { - status = rt2x00usb_alloc_entries(queue); - if (status) - goto exit; - } - - return 0; - -exit: - rt2x00usb_uninitialize(rt2x00dev); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_initialize); - -void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - queue_for_each(rt2x00dev, queue) - rt2x00usb_free_entries(queue); -} -EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); - -/* - * USB driver handlers. - */ -static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rf); - rt2x00dev->rf = NULL; - - kfree(rt2x00dev->eeprom); - rt2x00dev->eeprom = NULL; - - kfree(rt2x00dev->csr.cache); - rt2x00dev->csr.cache = NULL; -} - -static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) -{ - rt2x00dev->csr.cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); - if (!rt2x00dev->csr.cache) - goto exit; - - rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); - if (!rt2x00dev->eeprom) - goto exit; - - rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); - if (!rt2x00dev->rf) - goto exit; - - return 0; - -exit: - rt2x00_probe_err("Failed to allocate registers\n"); - - rt2x00usb_free_reg(rt2x00dev); - - return -ENOMEM; -} - -int rt2x00usb_probe(struct usb_interface *usb_intf, - const struct rt2x00_ops *ops) -{ - struct usb_device *usb_dev = interface_to_usbdev(usb_intf); - struct ieee80211_hw *hw; - struct rt2x00_dev *rt2x00dev; - int retval; - - usb_dev = usb_get_dev(usb_dev); - usb_reset_device(usb_dev); - - hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); - if (!hw) { - rt2x00_probe_err("Failed to allocate hardware\n"); - retval = -ENOMEM; - goto exit_put_device; - } - - usb_set_intfdata(usb_intf, hw); - - rt2x00dev = hw->priv; - rt2x00dev->dev = &usb_intf->dev; - rt2x00dev->ops = ops; - rt2x00dev->hw = hw; - - rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); - - INIT_WORK(&rt2x00dev->rxdone_work, rt2x00usb_work_rxdone); - INIT_WORK(&rt2x00dev->txdone_work, rt2x00usb_work_txdone); - hrtimer_init(&rt2x00dev->txstatus_timer, CLOCK_MONOTONIC, - HRTIMER_MODE_REL); - - retval = rt2x00usb_alloc_reg(rt2x00dev); - if (retval) - goto exit_free_device; - - retval = rt2x00lib_probe_dev(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00usb_free_reg(rt2x00dev); - -exit_free_device: - ieee80211_free_hw(hw); - -exit_put_device: - usb_put_dev(usb_dev); - - usb_set_intfdata(usb_intf, NULL); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00usb_probe); - -void rt2x00usb_disconnect(struct usb_interface *usb_intf) -{ - struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Free all allocated data. - */ - rt2x00lib_remove_dev(rt2x00dev); - rt2x00usb_free_reg(rt2x00dev); - ieee80211_free_hw(hw); - - /* - * Free the USB device data. - */ - usb_set_intfdata(usb_intf, NULL); - usb_put_dev(interface_to_usbdev(usb_intf)); -} -EXPORT_SYMBOL_GPL(rt2x00usb_disconnect); - -#ifdef CONFIG_PM -int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) -{ - struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); - struct rt2x00_dev *rt2x00dev = hw->priv; - - return rt2x00lib_suspend(rt2x00dev, state); -} -EXPORT_SYMBOL_GPL(rt2x00usb_suspend); - -int rt2x00usb_resume(struct usb_interface *usb_intf) -{ - struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); - struct rt2x00_dev *rt2x00dev = hw->priv; - - return rt2x00lib_resume(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00usb_resume); -#endif /* CONFIG_PM */ - -/* - * rt2x00usb module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 usb library"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h deleted file mode 100644 index 569363da00a2..000000000000 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ /dev/null @@ -1,424 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2x00usb - Abstract: Data structures for the rt2x00usb module. - */ - -#ifndef RT2X00USB_H -#define RT2X00USB_H - -#include <linux/usb.h> - -#define to_usb_device_intf(d) \ -({ \ - struct usb_interface *intf = to_usb_interface(d); \ - interface_to_usbdev(intf); \ -}) - -/* - * For USB vendor requests we need to pass a timeout time in ms, for this we - * use the REGISTER_TIMEOUT, however when loading firmware or read EEPROM - * a higher value is required. In that case we use the REGISTER_TIMEOUT_FIRMWARE - * and EEPROM_TIMEOUT. - */ -#define REGISTER_TIMEOUT 100 -#define REGISTER_TIMEOUT_FIRMWARE 1000 -#define EEPROM_TIMEOUT 2000 - -/* - * Cache size - */ -#define CSR_CACHE_SIZE 64 - -/* - * USB request types. - */ -#define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE ) -#define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) -#define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) - -/** - * enum rt2x00usb_vendor_request: USB vendor commands. - */ -enum rt2x00usb_vendor_request { - USB_DEVICE_MODE = 1, - USB_SINGLE_WRITE = 2, - USB_SINGLE_READ = 3, - USB_MULTI_WRITE = 6, - USB_MULTI_READ = 7, - USB_EEPROM_WRITE = 8, - USB_EEPROM_READ = 9, - USB_LED_CONTROL = 10, /* RT73USB */ - USB_RX_CONTROL = 12, -}; - -/** - * enum rt2x00usb_mode_offset: Device modes offset. - */ -enum rt2x00usb_mode_offset { - USB_MODE_RESET = 1, - USB_MODE_UNPLUG = 2, - USB_MODE_FUNCTION = 3, - USB_MODE_TEST = 4, - USB_MODE_SLEEP = 7, /* RT73USB */ - USB_MODE_FIRMWARE = 8, /* RT73USB */ - USB_MODE_WAKEUP = 9, /* RT73USB */ - USB_MODE_AUTORUN = 17, /* RT2800USB */ -}; - -/** - * rt2x00usb_vendor_request - Send register command to device - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @request: USB vendor command (See &enum rt2x00usb_vendor_request) - * @requesttype: Request type &USB_VENDOR_REQUEST_* - * @offset: Register offset to perform action on - * @value: Value to write to device - * @buffer: Buffer where information will be read/written to by device - * @buffer_length: Size of &buffer - * @timeout: Operation timeout - * - * This is the main function to communicate with the device, - * the &buffer argument _must_ either be NULL or point to - * a buffer allocated by kmalloc. Failure to do so can lead - * to unexpected behavior depending on the architecture. - */ -int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, const u16 value, - void *buffer, const u16 buffer_length, - const int timeout); - -/** - * rt2x00usb_vendor_request_buff - Send register command to device (buffered) - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @request: USB vendor command (See &enum rt2x00usb_vendor_request) - * @requesttype: Request type &USB_VENDOR_REQUEST_* - * @offset: Register offset to perform action on - * @buffer: Buffer where information will be read/written to by device - * @buffer_length: Size of &buffer - * - * This function will use a previously with kmalloc allocated cache - * to communicate with the device. The contents of the buffer pointer - * will be copied to this cache when writing, or read from the cache - * when reading. - * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with - * kmalloc. Hence the reason for using a previously allocated cache - * which has been allocated properly. - */ -int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, void *buffer, - const u16 buffer_length); - -/** - * rt2x00usb_vendor_request_buff - Send register command to device (buffered) - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @request: USB vendor command (See &enum rt2x00usb_vendor_request) - * @requesttype: Request type &USB_VENDOR_REQUEST_* - * @offset: Register offset to perform action on - * @buffer: Buffer where information will be read/written to by device - * @buffer_length: Size of &buffer - * @timeout: Operation timeout - * - * A version of &rt2x00usb_vendor_request_buff which must be called - * if the usb_cache_mutex is already held. - */ -int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, void *buffer, - const u16 buffer_length, const int timeout); - -/** - * rt2x00usb_vendor_request_sw - Send single register command to device - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @request: USB vendor command (See &enum rt2x00usb_vendor_request) - * @offset: Register offset to perform action on - * @value: Value to write to device - * @timeout: Operation timeout - * - * Simple wrapper around rt2x00usb_vendor_request to write a single - * command to the device. Since we don't use the buffer argument we - * don't have to worry about kmalloc here. - */ -static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev, - const u8 request, - const u16 offset, - const u16 value, - const int timeout) -{ - return rt2x00usb_vendor_request(rt2x00dev, request, - USB_VENDOR_REQUEST_OUT, offset, - value, NULL, 0, timeout); -} - -/** - * rt2x00usb_eeprom_read - Read eeprom from device - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @eeprom: Pointer to eeprom array to store the information in - * @length: Number of bytes to read from the eeprom - * - * Simple wrapper around rt2x00usb_vendor_request to read the eeprom - * from the device. Note that the eeprom argument _must_ be allocated using - * kmalloc for correct handling inside the kernel USB layer. - */ -static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, - __le16 *eeprom, const u16 length) -{ - return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, - USB_VENDOR_REQUEST_IN, 0, 0, - eeprom, length, EEPROM_TIMEOUT); -} - -/** - * rt2x00usb_register_read - Read 32bit register word - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @value: Pointer to where register contents should be stored - * - * This function is a simple wrapper for 32bit register access - * through rt2x00usb_vendor_request_buff(). - */ -static inline void rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - __le32 reg = 0; - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(reg)); - *value = le32_to_cpu(reg); -} - -/** - * rt2x00usb_register_read_lock - Read 32bit register word - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @value: Pointer to where register contents should be stored - * - * This function is a simple wrapper for 32bit register access - * through rt2x00usb_vendor_req_buff_lock(). - */ -static inline void rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - __le32 reg = 0; - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); - *value = le32_to_cpu(reg); -} - -/** - * rt2x00usb_register_multiread - Read 32bit register words - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @value: Pointer to where register contents should be stored - * @length: Length of the data - * - * This function is a simple wrapper for 32bit register access - * through rt2x00usb_vendor_request_buff(). - */ -static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - value, length); -} - -/** - * rt2x00usb_register_write - Write 32bit register word - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @value: Data which should be written - * - * This function is a simple wrapper for 32bit register access - * through rt2x00usb_vendor_request_buff(). - */ -static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - __le32 reg = cpu_to_le32(value); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(reg)); -} - -/** - * rt2x00usb_register_write_lock - Write 32bit register word - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @value: Data which should be written - * - * This function is a simple wrapper for 32bit register access - * through rt2x00usb_vendor_req_buff_lock(). - */ -static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - __le32 reg = cpu_to_le32(value); - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); -} - -/** - * rt2x00usb_register_multiwrite - Write 32bit register words - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @value: Data which should be written - * @length: Length of the data - * - * This function is a simple wrapper for 32bit register access - * through rt2x00usb_vendor_request_buff(). - */ -static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, - const u32 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - (void *)value, length); -} - -/** - * rt2x00usb_regbusy_read - Read from register with busy check - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @field: Field to check if register is busy - * @reg: Pointer to where register contents should be stored - * - * This function will read the given register, and checks if the - * register is busy. If it is, it will sleep for a couple of - * microseconds before reading the register again. If the register - * is not read after a certain timeout, this function will return - * FALSE. - */ -int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg); - -/** - * rt2x00usb_register_read_async - Asynchronously read 32bit register word - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @callback: Functon to call when read completes. - * - * Submit a control URB to read a 32bit register. This safe to - * be called from atomic context. The callback will be called - * when the URB completes. Otherwise the function is similar - * to rt2x00usb_register_read(). - * When the callback function returns false, the memory will be cleaned up, - * when it returns true, the urb will be fired again. - */ -void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - bool (*callback)(struct rt2x00_dev*, int, u32)); - -/* - * Radio handlers - */ -void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); - -/** - * struct queue_entry_priv_usb: Per entry USB specific information - * - * @urb: Urb structure used for device communication. - */ -struct queue_entry_priv_usb { - struct urb *urb; -}; - -/** - * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information - * - * The first section should match &struct queue_entry_priv_usb exactly. - * rt2500usb can use this structure to send a guardian byte when working - * with beacons. - * - * @urb: Urb structure used for device communication. - * @guardian_data: Set to 0, used for sending the guardian data. - * @guardian_urb: Urb structure used to send the guardian data. - */ -struct queue_entry_priv_usb_bcn { - struct urb *urb; - - unsigned int guardian_data; - struct urb *guardian_urb; -}; - -/** - * rt2x00usb_kick_queue - Kick data queue - * @queue: Data queue to kick - * - * This will walk through all entries of the queue and push all pending - * frames to the hardware as a single burst. - */ -void rt2x00usb_kick_queue(struct data_queue *queue); - -/** - * rt2x00usb_flush_queue - Flush data queue - * @queue: Data queue to stop - * @drop: True to drop all pending frames. - * - * This will walk through all entries of the queue and will optionally - * kill all URB's which were send to the device, or at least wait until - * they have been returned from the device.. - */ -void rt2x00usb_flush_queue(struct data_queue *queue, bool drop); - -/** - * rt2x00usb_watchdog - Watchdog for USB communication - * @rt2x00dev: Pointer to &struct rt2x00_dev - * - * Check the health of the USB communication and determine - * if timeouts have occurred. If this is the case, this function - * will reset all communication to restore functionality again. - */ -void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev); - -/* - * Device initialization handlers. - */ -void rt2x00usb_clear_entry(struct queue_entry *entry); -int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); - -/* - * USB driver handlers. - */ -int rt2x00usb_probe(struct usb_interface *usb_intf, - const struct rt2x00_ops *ops); -void rt2x00usb_disconnect(struct usb_interface *usb_intf); -#ifdef CONFIG_PM -int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state); -int rt2x00usb_resume(struct usb_interface *usb_intf); -#else -#define rt2x00usb_suspend NULL -#define rt2x00usb_resume NULL -#endif /* CONFIG_PM */ - -#endif /* RT2X00USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c deleted file mode 100644 index c0e730ea1b69..000000000000 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ /dev/null @@ -1,3111 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt61pci - Abstract: rt61pci device specific routines. - Supported chipsets: RT2561, RT2561s, RT2661. - */ - -#include <linux/crc-itu-t.h> -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/eeprom_93cx6.h> - -#include "rt2x00.h" -#include "rt2x00mmio.h" -#include "rt2x00pci.h" -#include "rt61pci.h" - -/* - * Allow hardware encryption to be disabled. - */ -static bool modparam_nohwcrypt = false; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - -/* - * Register access. - * BBP and RF register require indirect register access, - * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attempt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) -#define WAIT_FOR_MCU(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), H2M_MAILBOX_CSR, \ - H2M_MAILBOX_CSR_OWNER, (__reg)) - -static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - - rt2x00mmio_register_write(rt2x00dev, PHY_CSR3, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - - rt2x00mmio_register_write(rt2x00dev, PHY_CSR3, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - - rt2x00mmio_register_write(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the MCU becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_MCU(rt2x00dev, ®)) { - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, HOST_CMD_CSR, ®); - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); - rt2x00mmio_register_write(rt2x00dev, HOST_CMD_CSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); - -} - -static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); -} - -static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00mmio_register_write(rt2x00dev, E2PROM_CSR, reg); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt61pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00mmio_register_read, - .write = rt2x00mmio_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt61pci_bbp_read, - .write = rt61pci_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt61pci_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR13, ®); - return rt2x00_get_field32(reg, MAC_CSR13_VAL5); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt61pci_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int a_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - - if (led->type == LED_TYPE_RADIO) { - rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, - MCU_LEDCS_RADIO_STATUS, enabled); - - rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, - (led->rt2x00dev->led_mcu_reg & 0xff), - ((led->rt2x00dev->led_mcu_reg >> 8))); - } else if (led->type == LED_TYPE_ASSOC) { - rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, - MCU_LEDCS_LINK_BG_STATUS, bg_mode); - rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, - MCU_LEDCS_LINK_A_STATUS, a_mode); - - rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, - (led->rt2x00dev->led_mcu_reg & 0xff), - ((led->rt2x00dev->led_mcu_reg >> 8))); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * this means we need to convert the brightness - * argument into the matching level within that range. - */ - rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - brightness / (LED_FULL / 6), 0); - } -} - -static int rt61pci_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00mmio_register_read(led->rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); - rt2x00mmio_register_write(led->rt2x00dev, MAC_CSR14, reg); - - return 0; -} - -static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt61pci_brightness_set; - led->led_dev.blink_set = rt61pci_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - u32 mask; - u32 reg; - - if (crypto->cmd == SET_KEY) { - /* - * rt2x00lib can't determine the correct free - * key_idx for shared keys. We have 1 register - * with key valid bits. The goal is simple, read - * the register, if that is full we have no slots - * left. - * Note that each BSS is allowed to have up to 4 - * shared keys, so put a mask over the allowed - * entries. - */ - mask = (0xf << crypto->bssidx); - - rt2x00mmio_register_read(rt2x00dev, SEC_CSR0, ®); - reg &= mask; - - if (reg && reg == mask) - return -ENOSPC; - - key->hw_key_idx += reg ? ffz(reg) : 0; - - /* - * Upload key to hardware - */ - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - reg = SHARED_KEY_ENTRY(key->hw_key_idx); - rt2x00mmio_register_multiwrite(rt2x00dev, reg, - &key_entry, sizeof(key_entry)); - - /* - * The cipher types are stored over 2 registers. - * bssidx 0 and 1 keys are stored in SEC_CSR1 and - * bssidx 1 and 2 keys are stored in SEC_CSR5. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - if (key->hw_key_idx < 8) { - field.bit_offset = (3 * key->hw_key_idx); - field.bit_mask = 0x7 << field.bit_offset; - - rt2x00mmio_register_read(rt2x00dev, SEC_CSR1, ®); - rt2x00_set_field32(®, field, crypto->cipher); - rt2x00mmio_register_write(rt2x00dev, SEC_CSR1, reg); - } else { - field.bit_offset = (3 * (key->hw_key_idx - 8)); - field.bit_mask = 0x7 << field.bit_offset; - - rt2x00mmio_register_read(rt2x00dev, SEC_CSR5, ®); - rt2x00_set_field32(®, field, crypto->cipher); - rt2x00mmio_register_write(rt2x00dev, SEC_CSR5, reg); - } - - /* - * The driver does not support the IV/EIV generation - * in hardware. However it doesn't support the IV/EIV - * inside the ieee80211 frame either, but requires it - * to be provided separately for the descriptor. - * rt2x00lib will cut the IV/EIV data out of all frames - * given to us by mac80211, but we must tell mac80211 - * to generate the IV/EIV data. - */ - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - } - - /* - * SEC_CSR0 contains only single-bit fields to indicate - * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead, we use - * a calculation to determine the correct bit directly. - */ - mask = 1 << key->hw_key_idx; - - rt2x00mmio_register_read(rt2x00dev, SEC_CSR0, ®); - if (crypto->cmd == SET_KEY) - reg |= mask; - else if (crypto->cmd == DISABLE_KEY) - reg &= ~mask; - rt2x00mmio_register_write(rt2x00dev, SEC_CSR0, reg); - - return 0; -} - -static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_pairwise_ta_entry addr_entry; - struct hw_key_entry key_entry; - u32 mask; - u32 reg; - - if (crypto->cmd == SET_KEY) { - /* - * rt2x00lib can't determine the correct free - * key_idx for pairwise keys. We have 2 registers - * with key valid bits. The goal is simple: read - * the first register. If that is full, move to - * the next register. - * When both registers are full, we drop the key. - * Otherwise, we use the first invalid entry. - */ - rt2x00mmio_register_read(rt2x00dev, SEC_CSR2, ®); - if (reg && reg == ~0) { - key->hw_key_idx = 32; - rt2x00mmio_register_read(rt2x00dev, SEC_CSR3, ®); - if (reg && reg == ~0) - return -ENOSPC; - } - - key->hw_key_idx += reg ? ffz(reg) : 0; - - /* - * Upload key to hardware - */ - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - memset(&addr_entry, 0, sizeof(addr_entry)); - memcpy(&addr_entry, crypto->address, ETH_ALEN); - addr_entry.cipher = crypto->cipher; - - reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - rt2x00mmio_register_multiwrite(rt2x00dev, reg, - &key_entry, sizeof(key_entry)); - - reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); - rt2x00mmio_register_multiwrite(rt2x00dev, reg, - &addr_entry, sizeof(addr_entry)); - - /* - * Enable pairwise lookup table for given BSS idx. - * Without this, received frames will not be decrypted - * by the hardware. - */ - rt2x00mmio_register_read(rt2x00dev, SEC_CSR4, ®); - reg |= (1 << crypto->bssidx); - rt2x00mmio_register_write(rt2x00dev, SEC_CSR4, reg); - - /* - * The driver does not support the IV/EIV generation - * in hardware. However it doesn't support the IV/EIV - * inside the ieee80211 frame either, but requires it - * to be provided separately for the descriptor. - * rt2x00lib will cut the IV/EIV data out of all frames - * given to us by mac80211, but we must tell mac80211 - * to generate the IV/EIV data. - */ - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - } - - /* - * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate - * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead, we use - * a calculation to determine the correct bit directly. - */ - if (key->hw_key_idx < 32) { - mask = 1 << key->hw_key_idx; - - rt2x00mmio_register_read(rt2x00dev, SEC_CSR2, ®); - if (crypto->cmd == SET_KEY) - reg |= mask; - else if (crypto->cmd == DISABLE_KEY) - reg &= ~mask; - rt2x00mmio_register_write(rt2x00dev, SEC_CSR2, reg); - } else { - mask = 1 << (key->hw_key_idx - 32); - - rt2x00mmio_register_read(rt2x00dev, SEC_CSR3, ®); - if (crypto->cmd == SET_KEY) - reg |= mask; - else if (crypto->cmd == DISABLE_KEY) - reg &= ~mask; - rt2x00mmio_register_write(rt2x00dev, SEC_CSR3, reg); - } - - return 0; -} - -static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg); -} - -static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Enable synchronisation. - */ - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2x00mmio_register_multiwrite(rt2x00dev, MAC_CSR2, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); - conf->bssid[1] = cpu_to_le32(reg); - - rt2x00mmio_register_multiwrite(rt2x00dev, MAC_CSR4, - conf->bssid, - sizeof(conf->bssid)); - } -} - -static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp, - u32 changed) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32); - rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg); - - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!erp->short_preamble); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR4, reg); - } - - if (changed & BSS_CHANGED_BASIC_RATES) - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR5, - erp->basic_rates); - - if (changed & BSS_CHANGED_BEACON_INT) { - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - } - - if (changed & BSS_CHANGED_ERP_SLOT) { - rt2x00mmio_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR9, reg); - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR8, reg); - } -} - -static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r3; - u8 r4; - u8 r77; - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt61pci_bbp_read(rt2x00dev, 4, &r4); - rt61pci_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF5325)); - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ)); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); - else - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); - else - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); - break; - } - - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_bbp_write(rt2x00dev, 3, r3); - rt61pci_bbp_write(rt2x00dev, 4, r4); -} - -static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r3; - u8 r4; - u8 r77; - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt61pci_bbp_read(rt2x00dev, 4, &r4); - rt61pci_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529)); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !rt2x00_has_cap_frame_type(rt2x00dev)); - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); - break; - } - - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_bbp_write(rt2x00dev, 3, r3); - rt61pci_bbp_write(rt2x00dev, 4, r4); -} - -static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev, - const int p1, const int p2) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR13, ®); - - rt2x00_set_field32(®, MAC_CSR13_DIR4, 0); - rt2x00_set_field32(®, MAC_CSR13_VAL4, p1); - - rt2x00_set_field32(®, MAC_CSR13_DIR3, 0); - rt2x00_set_field32(®, MAC_CSR13_VAL3, !p2); - - rt2x00mmio_register_write(rt2x00dev, MAC_CSR13, reg); -} - -static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r3; - u8 r4; - u8 r77; - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt61pci_bbp_read(rt2x00dev, 4, &r4); - rt61pci_bbp_read(rt2x00dev, 77, &r77); - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); - break; - case ANTENNA_HW_DIVERSITY: - /* - * FIXME: Antenna selection for the rf 2529 is very confusing - * in the legacy driver. Just default to antenna B until the - * legacy code can be properly translated into rt2x00 code. - */ - case ANTENNA_B: - default: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); - break; - } - - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_bbp_write(rt2x00dev, 3, r3); - rt61pci_bbp_write(rt2x00dev, 4, r4); -} - -struct antenna_sel { - u8 word; - /* - * value[0] -> non-LNA - * value[1] -> LNA - */ - u8 value[2]; -}; - -static const struct antenna_sel antenna_sel_a[] = { - { 96, { 0x58, 0x78 } }, - { 104, { 0x38, 0x48 } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x60, 0x60 } }, - { 97, { 0x58, 0x58 } }, - { 98, { 0x58, 0x58 } }, -}; - -static const struct antenna_sel antenna_sel_bg[] = { - { 96, { 0x48, 0x68 } }, - { 104, { 0x2c, 0x3c } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x50, 0x50 } }, - { 97, { 0x48, 0x48 } }, - { 98, { 0x48, 0x48 } }, -}; - -static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - const struct antenna_sel *sel; - unsigned int lna; - unsigned int i; - u32 reg; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - sel = antenna_sel_a; - lna = rt2x00_has_cap_external_lna_a(rt2x00dev); - } else { - sel = antenna_sel_bg; - lna = rt2x00_has_cap_external_lna_bg(rt2x00dev); - } - - for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) - rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); - - rt2x00mmio_register_read(rt2x00dev, PHY_CSR0, ®); - - rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, - rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, - rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); - - rt2x00mmio_register_write(rt2x00dev, PHY_CSR0, reg); - - if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) - rt61pci_config_antenna_5x(rt2x00dev, ant); - else if (rt2x00_rf(rt2x00dev, RF2527)) - rt61pci_config_antenna_2x(rt2x00dev, ant); - else if (rt2x00_rf(rt2x00dev, RF2529)) { - if (rt2x00_has_cap_double_antenna(rt2x00dev)) - rt61pci_config_antenna_2x(rt2x00dev, ant); - else - rt61pci_config_antenna_2529(rt2x00dev, ant); - } -} - -static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain = 0; - - if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) - lna_gain += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); - } else { - if (rt2x00_has_cap_external_lna_a(rt2x00dev)) - lna_gain += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r3; - u8 r94; - u8 smart; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527)); - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); - rt61pci_bbp_write(rt2x00dev, 3, r3); - - r94 = 6; - if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) - r94 += txpower - MAX_TXPOWER; - else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) - r94 += txpower; - rt61pci_bbp_write(rt2x00dev, 94, r94); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - msleep(1); -} - -static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - struct rf_channel rf; - - rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); - rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); - rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); - rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); - - rt61pci_config_channel(rt2x00dev, &rf, txpower); -} - -static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1); - rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_RATE_STEP, 0); - rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0); - rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR4, reg); -} - -static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00mmio_register_read(rt2x00dev, MAC_CSR11, ®); - rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, - rt2x00dev->beacon_int - 10); - rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5); - - /* We must first disable autowake before it can be enabled */ - rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR11, reg); - - rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR11, reg); - - rt2x00mmio_register_write(rt2x00dev, SOFT_RESET_CSR, - 0x00000005); - rt2x00mmio_register_write(rt2x00dev, IO_CNTL_CSR, 0x0000001c); - rt2x00mmio_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000060); - - rt61pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); - } else { - rt2x00mmio_register_read(rt2x00dev, MAC_CSR11, ®); - rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, 0); - rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0); - rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); - rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 0); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR11, reg); - - rt2x00mmio_register_write(rt2x00dev, SOFT_RESET_CSR, - 0x00000007); - rt2x00mmio_register_write(rt2x00dev, IO_CNTL_CSR, 0x00000018); - rt2x00mmio_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000020); - - rt61pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); - } -} - -static void rt61pci_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt61pci_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt61pci_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & IEEE80211_CONF_CHANGE_POWER) && - !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) - rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt61pci_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt61pci_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00mmio_register_read(rt2x00dev, STA_CSR0, ®); - qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2x00mmio_register_read(rt2x00dev, STA_CSR1, ®); - qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); -} - -static inline void rt61pci_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt61pci_bbp_write(rt2x00dev, 17, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt61pci_set_vgc(rt2x00dev, qual, 0x20); -} - -static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - u8 up_bound; - u8 low_bound; - - /* - * Determine r17 bounds. - */ - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - low_bound = 0x28; - up_bound = 0x48; - if (rt2x00_has_cap_external_lna_a(rt2x00dev)) { - low_bound += 0x10; - up_bound += 0x10; - } - } else { - low_bound = 0x20; - up_bound = 0x40; - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { - low_bound += 0x10; - up_bound += 0x10; - } - } - - /* - * If we are not associated, we should go straight to the - * dynamic CCA tuning. - */ - if (!rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * Special big-R17 for very short distance - */ - if (qual->rssi >= -35) { - rt61pci_set_vgc(rt2x00dev, qual, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (qual->rssi >= -58) { - rt61pci_set_vgc(rt2x00dev, qual, up_bound); - return; - } - - /* - * Special big-R17 for middle-short distance - */ - if (qual->rssi >= -66) { - rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x10); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (qual->rssi >= -74) { - rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x08); - return; - } - - /* - * Special case: Change up_bound based on the rssi. - * Lower up_bound when rssi is weaker then -74 dBm. - */ - up_bound -= 2 * (-74 - qual->rssi); - if (low_bound > up_bound) - up_bound = low_bound; - - if (qual->vgc_level > up_bound) { - rt61pci_set_vgc(rt2x00dev, qual, up_bound); - return; - } - -dynamic_cca_tune: - - /* - * r17 does not yet exceed upper limit, continue and base - * the r17 tuning on the false CCA count. - */ - if ((qual->false_cca > 512) && (qual->vgc_level < up_bound)) - rt61pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level); - else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound)) - rt61pci_set_vgc(rt2x00dev, qual, --qual->vgc_level); -} - -/* - * Queue handlers. - */ -static void rt61pci_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - break; - default: - break; - } -} - -static void rt61pci_kick_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - case QID_AC_VI: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - case QID_AC_BE: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - case QID_AC_BK: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - default: - break; - } -} - -static void rt61pci_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - case QID_AC_VI: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - case QID_AC_BE: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - case QID_AC_BK: - rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); - rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg); - break; - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 1); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * Wait for possibly running tbtt tasklets. - */ - tasklet_kill(&rt2x00dev->tbtt_tasklet); - break; - default: - break; - } -} - -/* - * Firmware functions - */ -static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) -{ - u16 chip; - char *fw_name; - - pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip); - switch (chip) { - case RT2561_PCI_ID: - fw_name = FIRMWARE_RT2561; - break; - case RT2561s_PCI_ID: - fw_name = FIRMWARE_RT2561s; - break; - case RT2661_PCI_ID: - fw_name = FIRMWARE_RT2661; - break; - default: - fw_name = NULL; - break; - } - - return fw_name; -} - -static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - u16 fw_crc; - u16 crc; - - /* - * Only support 8kb firmware files. - */ - if (len != 8192) - return FW_BAD_LENGTH; - - /* - * The last 2 bytes in the firmware array are the crc checksum itself. - * This means that we should never pass those 2 bytes to the crc - * algorithm. - */ - fw_crc = (data[len - 2] << 8 | data[len - 1]); - - /* - * Use the crc itu-t algorithm. - */ - crc = crc_itu_t(0, data, len - 2); - crc = crc_itu_t_byte(crc, 0); - crc = crc_itu_t_byte(crc, 0); - - return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; -} - -static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - int i; - u32 reg; - - /* - * Wait for stable hardware. - */ - for (i = 0; i < 100; i++) { - rt2x00mmio_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg) - break; - msleep(1); - } - - if (!reg) { - rt2x00_err(rt2x00dev, "Unstable hardware\n"); - return -EBUSY; - } - - /* - * Prepare MCU and mailbox for firmware loading. - */ - reg = 0; - rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); - rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - rt2x00mmio_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); - rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - rt2x00mmio_register_write(rt2x00dev, HOST_CMD_CSR, 0); - - /* - * Write firmware to device. - */ - reg = 0; - rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); - rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 1); - rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - - rt2x00mmio_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, - data, len); - - rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 0); - rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - - rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 0); - rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - - for (i = 0; i < 100; i++) { - rt2x00mmio_register_read(rt2x00dev, MCU_CNTL_CSR, ®); - if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY)) - break; - msleep(1); - } - - if (i == 100) { - rt2x00_err(rt2x00dev, "MCU Control register not ready\n"); - return -EBUSY; - } - - /* - * Hardware needs another millisecond before it is ready. - */ - msleep(1); - - /* - * Reset MAC and BBP registers. - */ - reg = 0; - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg); - - return 0; -} - -/* - * Initialization functions. - */ -static bool rt61pci_get_entry_state(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - rt2x00_get_field32(word, TXD_W0_VALID)); - } -} - -static void rt61pci_clear_entry(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 5, &word); - rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 5, word); - - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); - } -} - -static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) -{ - struct queue_entry_priv_mmio *entry_priv; - u32 reg; - - /* - * Initialize registers. - */ - rt2x00mmio_register_read(rt2x00dev, TX_RING_CSR0, ®); - rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE, - rt2x00dev->tx[0].limit); - rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE, - rt2x00dev->tx[1].limit); - rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE, - rt2x00dev->tx[2].limit); - rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE, - rt2x00dev->tx[3].limit); - rt2x00mmio_register_write(rt2x00dev, TX_RING_CSR0, reg); - - rt2x00mmio_register_read(rt2x00dev, TX_RING_CSR1, ®); - rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE, - rt2x00dev->tx[0].desc_size / 4); - rt2x00mmio_register_write(rt2x00dev, TX_RING_CSR1, reg); - - entry_priv = rt2x00dev->tx[0].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, AC0_BASE_CSR, ®); - rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, AC0_BASE_CSR, reg); - - entry_priv = rt2x00dev->tx[1].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, AC1_BASE_CSR, ®); - rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, AC1_BASE_CSR, reg); - - entry_priv = rt2x00dev->tx[2].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, AC2_BASE_CSR, ®); - rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, AC2_BASE_CSR, reg); - - entry_priv = rt2x00dev->tx[3].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, AC3_BASE_CSR, ®); - rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, AC3_BASE_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, RX_RING_CSR, ®); - rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit); - rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE, - rt2x00dev->rx->desc_size / 4); - rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); - rt2x00mmio_register_write(rt2x00dev, RX_RING_CSR, reg); - - entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, RX_BASE_CSR, ®); - rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, RX_BASE_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC0, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2); - rt2x00mmio_register_write(rt2x00dev, TX_DMA_DST_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1); - rt2x00mmio_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, RX_CNTL_CSR, ®); - rt2x00_set_field32(®, RX_CNTL_CSR_LOAD_RXD, 1); - rt2x00mmio_register_write(rt2x00dev, RX_CNTL_CSR, reg); - - return 0; -} - -static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); - rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR1, reg); - - /* - * CCK TXD BBP registers - */ - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR2, reg); - - /* - * OFDM TXD BBP registers - */ - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR3, ®); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR3, reg); - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR7, ®); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR7, reg); - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR8, ®); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR8, reg); - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); - - rt2x00mmio_register_write(rt2x00dev, MAC_CSR6, 0x00000fff); - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR9, reg); - - rt2x00mmio_register_write(rt2x00dev, MAC_CSR10, 0x0000071c); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00mmio_register_write(rt2x00dev, MAC_CSR13, 0x0000e000); - - /* - * Invalidate all Shared Keys (SEC_CSR0), - * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) - */ - rt2x00mmio_register_write(rt2x00dev, SEC_CSR0, 0x00000000); - rt2x00mmio_register_write(rt2x00dev, SEC_CSR1, 0x00000000); - rt2x00mmio_register_write(rt2x00dev, SEC_CSR5, 0x00000000); - - rt2x00mmio_register_write(rt2x00dev, PHY_CSR1, 0x000023b0); - rt2x00mmio_register_write(rt2x00dev, PHY_CSR5, 0x060a100c); - rt2x00mmio_register_write(rt2x00dev, PHY_CSR6, 0x00080606); - rt2x00mmio_register_write(rt2x00dev, PHY_CSR7, 0x00000a08); - - rt2x00mmio_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404); - - rt2x00mmio_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200); - - rt2x00mmio_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); - - /* - * Clear all beacons - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00mmio_register_read(rt2x00dev, STA_CSR0, ®); - rt2x00mmio_register_read(rt2x00dev, STA_CSR1, ®); - rt2x00mmio_register_read(rt2x00dev, STA_CSR2, ®); - - /* - * Reset MAC and BBP registers. - */ - rt2x00mmio_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg); - - return 0; -} - -static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt61pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} - -static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt61pci_bbp_write(rt2x00dev, 3, 0x00); - rt61pci_bbp_write(rt2x00dev, 15, 0x30); - rt61pci_bbp_write(rt2x00dev, 21, 0xc8); - rt61pci_bbp_write(rt2x00dev, 22, 0x38); - rt61pci_bbp_write(rt2x00dev, 23, 0x06); - rt61pci_bbp_write(rt2x00dev, 24, 0xfe); - rt61pci_bbp_write(rt2x00dev, 25, 0x0a); - rt61pci_bbp_write(rt2x00dev, 26, 0x0d); - rt61pci_bbp_write(rt2x00dev, 34, 0x12); - rt61pci_bbp_write(rt2x00dev, 37, 0x07); - rt61pci_bbp_write(rt2x00dev, 39, 0xf8); - rt61pci_bbp_write(rt2x00dev, 41, 0x60); - rt61pci_bbp_write(rt2x00dev, 53, 0x10); - rt61pci_bbp_write(rt2x00dev, 54, 0x18); - rt61pci_bbp_write(rt2x00dev, 60, 0x10); - rt61pci_bbp_write(rt2x00dev, 61, 0x04); - rt61pci_bbp_write(rt2x00dev, 62, 0x04); - rt61pci_bbp_write(rt2x00dev, 75, 0xfe); - rt61pci_bbp_write(rt2x00dev, 86, 0xfe); - rt61pci_bbp_write(rt2x00dev, 88, 0xfe); - rt61pci_bbp_write(rt2x00dev, 90, 0x0f); - rt61pci_bbp_write(rt2x00dev, 99, 0x00); - rt61pci_bbp_write(rt2x00dev, 102, 0x16); - rt61pci_bbp_write(rt2x00dev, 107, 0x04); - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt61pci_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int mask = (state == STATE_RADIO_IRQ_OFF); - u32 reg; - unsigned long flags; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®); - rt2x00mmio_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg); - } - - /* - * Only toggle the interrupts bits we are going to use. - * Non-checked interrupt bits are disabled by default. - */ - spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); - - rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, INT_MASK_CSR_TXDONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_RXDONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_BEACON_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_ENABLE_MITIGATION, mask); - rt2x00_set_field32(®, INT_MASK_CSR_MITIGATION_PERIOD, 0xff); - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_0, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_1, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_2, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_3, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_4, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_5, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_6, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_7, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_TWAKEUP, mask); - rt2x00mmio_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); - - spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); - - if (state == STATE_RADIO_IRQ_OFF) { - /* - * Ensure that all tasklets are finished. - */ - tasklet_kill(&rt2x00dev->txstatus_tasklet); - tasklet_kill(&rt2x00dev->rxdone_tasklet); - tasklet_kill(&rt2x00dev->autowake_tasklet); - tasklet_kill(&rt2x00dev->tbtt_tasklet); - } -} - -static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Initialize all registers. - */ - if (unlikely(rt61pci_init_queues(rt2x00dev) || - rt61pci_init_registers(rt2x00dev) || - rt61pci_init_bbp(rt2x00dev))) - return -EIO; - - /* - * Enable RX. - */ - rt2x00mmio_register_read(rt2x00dev, RX_CNTL_CSR, ®); - rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1); - rt2x00mmio_register_write(rt2x00dev, RX_CNTL_CSR, reg); - - return 0; -} - -static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Disable power - */ - rt2x00mmio_register_write(rt2x00dev, MAC_CSR10, 0x00001818); -} - -static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) -{ - u32 reg, reg2; - unsigned int i; - char put_to_sleep; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00mmio_register_read(rt2x00dev, MAC_CSR12, ®); - rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); - rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR12, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00mmio_register_read(rt2x00dev, MAC_CSR12, ®2); - state = rt2x00_get_field32(reg2, MAC_CSR12_BBP_CURRENT_STATE); - if (state == !put_to_sleep) - return 0; - rt2x00mmio_register_write(rt2x00dev, MAC_CSR12, reg); - msleep(10); - } - - return -EBUSY; -} - -static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt61pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt61pci_disable_radio(rt2x00dev); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - rt61pci_toggle_irq(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt61pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt61pci_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *txd = entry_priv->desc; - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, entry->queue->qid); - rt2x00_set_field32(&word, TXD_W1_AIFSN, entry->queue->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, - test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->u.plcp.signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->u.plcp.service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, - txdesc->u.plcp.length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, - txdesc->u.plcp.length_high); - rt2x00_desc_write(txd, 2, word); - - if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { - _rt2x00_desc_write(txd, 3, skbdesc->iv[0]); - _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); - } - - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid); - rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, - skbdesc->entry->entry_idx); - rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power)); - rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); - rt2x00_desc_write(txd, 5, word); - - if (entry->queue->qid != QID_BEACON) { - rt2x00_desc_read(txd, 6, &word); - rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - skbdesc->skb_dma); - rt2x00_desc_write(txd, 6, word); - - rt2x00_desc_read(txd, 11, &word); - rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, - txdesc->length); - rt2x00_desc_write(txd, 11, word); - } - - /* - * Writing TXD word 0 must the last to prevent a race condition with - * the device, whereby the device may take hold of the TXD before we - * finished updating it. - */ - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - (txdesc->rate_mode == RATE_MODE_OFDM)); - rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, - test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, - test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); - rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); - rt2x00_desc_write(txd, 0, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->desc = txd; - skbdesc->desc_len = (entry->queue->qid == QID_BEACON) ? TXINFO_SIZE : - TXD_DESC_SIZE; -} - -/* - * TX data initialization - */ -static void rt61pci_write_beacon(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - unsigned int beacon_base; - unsigned int padding_len; - u32 orig_reg, reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9, ®); - orig_reg = reg; - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * Write the TX descriptor for the beacon. - */ - rt61pci_write_tx_desc(entry, txdesc); - - /* - * Dump beacon to userspace through debugfs. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - - /* - * Write entire beacon with descriptor and padding to register. - */ - padding_len = roundup(entry->skb->len, 4) - entry->skb->len; - if (padding_len && skb_pad(entry->skb, padding_len)) { - rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n"); - /* skb freed by skb_pad() on failure */ - entry->skb = NULL; - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, orig_reg); - return; - } - - beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00mmio_register_multiwrite(rt2x00dev, beacon_base, - entry_priv->desc, TXINFO_SIZE); - rt2x00mmio_register_multiwrite(rt2x00dev, beacon_base + TXINFO_SIZE, - entry->skb->data, - entry->skb->len + padding_len); - - /* - * Enable beaconing again. - * - * For Wi-Fi faily generated beacons between participating - * stations. Set TBTT phase adaptive adjustment step to 8us. - */ - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); - - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * Clean up beacon skb. - */ - dev_kfree_skb_any(entry->skb); - entry->skb = NULL; -} - -static void rt61pci_clear_beacon(struct queue_entry *entry) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - u32 orig_reg, reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9, &orig_reg); - reg = orig_reg; - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * Clear beacon. - */ - rt2x00mmio_register_write(rt2x00dev, - HW_BEACON_OFFSET(entry->entry_idx), 0); - - /* - * Restore global beaconing state. - */ - rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, orig_reg); -} - -/* - * RX control handlers - */ -static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) -{ - u8 offset = rt2x00dev->lna_gain; - u8 lna; - - lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); - switch (lna) { - case 3: - offset += 90; - break; - case 2: - offset += 74; - break; - case 1: - offset += 64; - break; - default: - return 0; - } - - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - if (lna == 3 || lna == 2) - offset += 10; - } - - return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; -} - -static void rt61pci_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word0; - u32 word1; - - rt2x00_desc_read(entry_priv->desc, 0, &word0); - rt2x00_desc_read(entry_priv->desc, 1, &word1); - - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - - rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); - rxdesc->cipher_status = rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); - - if (rxdesc->cipher != CIPHER_NONE) { - _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv[0]); - _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->iv[1]); - rxdesc->dev_flags |= RXDONE_CRYPTO_IV; - - _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv); - rxdesc->dev_flags |= RXDONE_CRYPTO_ICV; - - /* - * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. It has provided the data separately but rt2x00lib - * should decide if it should be reinserted. - */ - rxdesc->flags |= RX_FLAG_IV_STRIPPED; - - /* - * The hardware has already checked the Michael Mic and has - * stripped it from the frame. Signal this to mac80211. - */ - rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; - - if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) - rxdesc->flags |= RX_FLAG_DECRYPTED; - else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) - rxdesc->flags |= RX_FLAG_MMIC_ERROR; - } - - /* - * Obtain the status about this packet. - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 100kbit/s. - */ - rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1); - rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - if (rt2x00_get_field32(word0, RXD_W0_OFDM)) - rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; - else - rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; - if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; -} - -/* - * Interrupt functions. - */ -static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - struct queue_entry *entry; - struct queue_entry *entry_done; - struct queue_entry_priv_mmio *entry_priv; - struct txdone_entry_desc txdesc; - u32 word; - u32 reg; - int type; - int index; - int i; - - /* - * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO - * at most X times and also stop processing once the TX_STA_FIFO_VALID - * flag is not set anymore. - * - * The legacy drivers use X=TX_RING_SIZE but state in a comment - * that the TX_STA_FIFO stack has a size of 16. We stick to our - * tx ring size for now. - */ - for (i = 0; i < rt2x00dev->tx->limit; i++) { - rt2x00mmio_register_read(rt2x00dev, STA_CSR4, ®); - if (!rt2x00_get_field32(reg, STA_CSR4_VALID)) - break; - - /* - * Skip this entry when it contains an invalid - * queue identication number. - */ - type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE); - queue = rt2x00queue_get_tx_queue(rt2x00dev, type); - if (unlikely(!queue)) - continue; - - /* - * Skip this entry when it contains an invalid - * index number. - */ - index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE); - if (unlikely(index >= queue->limit)) - continue; - - entry = &queue->entries[index]; - entry_priv = entry->priv_data; - rt2x00_desc_read(entry_priv->desc, 0, &word); - - if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - !rt2x00_get_field32(word, TXD_W0_VALID)) - return; - - entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - while (entry != entry_done) { - /* Catch up. - * Just report any entries we missed as failed. - */ - rt2x00_warn(rt2x00dev, "TX status report missed for entry %d\n", - entry_done->entry_idx); - - rt2x00lib_txdone_noinfo(entry_done, TXDONE_UNKNOWN); - entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - } - - /* - * Obtain the status about this packet. - */ - txdesc.flags = 0; - switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) { - case 0: /* Success, maybe with retry */ - __set_bit(TXDONE_SUCCESS, &txdesc.flags); - break; - case 6: /* Failure, excessive retries */ - __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); - /* Don't break, this is a failed frame! */ - default: /* Failure */ - __set_bit(TXDONE_FAILURE, &txdesc.flags); - } - txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - - /* - * the frame was retried at least once - * -> hw used fallback rates - */ - if (txdesc.retry) - __set_bit(TXDONE_FALLBACK, &txdesc.flags); - - rt2x00lib_txdone(entry, &txdesc); - } -} - -static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev) -{ - struct rt2x00lib_conf libconf = { .conf = &rt2x00dev->hw->conf }; - - rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); -} - -static inline void rt61pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) -{ - u32 reg; - - /* - * Enable a single interrupt. The interrupt mask register - * access needs locking. - */ - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, irq_field, 0); - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); -} - -static void rt61pci_enable_mcu_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) -{ - u32 reg; - - /* - * Enable a single MCU interrupt. The interrupt mask register - * access needs locking. - */ - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®); - rt2x00_set_field32(®, irq_field, 0); - rt2x00mmio_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); -} - -static void rt61pci_txstatus_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt61pci_txdone(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TXDONE); -} - -static void rt61pci_tbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00lib_beacondone(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_BEACON_DONE); -} - -static void rt61pci_rxdone_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2x00mmio_rxdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE); -} - -static void rt61pci_autowake_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt61pci_wakeup(rt2x00dev); - rt2x00mmio_register_write(rt2x00dev, - M2H_CMD_DONE_CSR, 0xffffffff); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt61pci_enable_mcu_interrupt(rt2x00dev, MCU_INT_MASK_CSR_TWAKEUP); -} - -static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg_mcu, mask_mcu; - u32 reg, mask; - - /* - * Get the interrupt sources & saved to local variable. - * Write register value back to clear pending interrupts. - */ - rt2x00mmio_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®_mcu); - rt2x00mmio_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu); - - rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - - if (!reg && !reg_mcu) - return IRQ_NONE; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - /* - * Schedule tasklets for interrupt handling. - */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE)) - tasklet_schedule(&rt2x00dev->txstatus_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_BEACON_DONE)) - tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); - - if (rt2x00_get_field32(reg_mcu, MCU_INT_SOURCE_CSR_TWAKEUP)) - tasklet_schedule(&rt2x00dev->autowake_tasklet); - - /* - * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits - * for interrupts and interrupt masks we can just use the value of - * INT_SOURCE_CSR to create the interrupt mask. - */ - mask = reg; - mask_mcu = reg_mcu; - - /* - * Disable all interrupts for which a tasklet was scheduled right now, - * the tasklet will reenable the appropriate interrupts. - */ - spin_lock(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®); - reg |= mask; - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®); - reg |= mask_mcu; - rt2x00mmio_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); - - spin_unlock(&rt2x00dev->irqmask_lock); - - return IRQ_HANDLED; -} - -/* - * Device probe functions. - */ -static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - u16 word; - u8 *mac; - s8 value; - - rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt61pci_eepromregister_read; - eeprom.register_write = rt61pci_eepromregister_write; - eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ? - PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - eth_random_addr(mac); - rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, - ANTENNA_B); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, - ANTENNA_B); - rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0); - rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0); - rt2x00_set_field16(&word, EEPROM_NIC_RX_FIXED, 0); - rt2x00_set_field16(&word, EEPROM_NIC_TX_FIXED, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, - LED_MODE_DEFAULT); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); - rt2x00_eeprom_dbg(rt2x00dev, "Led: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - rt2x00_eeprom_dbg(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - rt2x00_eeprom_dbg(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - } - - return 0; -} - -static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00mmio_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET), - value, rt2x00_get_field32(reg, MAC_CSR0_REVISION)); - - if (!rt2x00_rf(rt2x00dev, RF5225) && - !rt2x00_rf(rt2x00dev, RF5325) && - !rt2x00_rf(rt2x00dev, RF2527) && - !rt2x00_rf(rt2x00dev, RF2529)) { - rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n"); - return -ENODEV; - } - - /* - * Determine number of antennas. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) - __set_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags); - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Read the Frame type. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) - __set_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags); - - /* - * Detect if this device has a hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); - - /* - * Read frequency offset and RF programming sequence. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ)) - __set_bit(CAPABILITY_RF_SEQUENCE, &rt2x00dev->cap_flags); - - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Read external LNA informations. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) - __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) - __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); - - /* - * When working with a RF2529 chip without double antenna, - * the antenna settings should be gathered from the NIC - * eeprom word. - */ - if (rt2x00_rf(rt2x00dev, RF2529) && - !rt2x00_has_cap_double_antenna(rt2x00dev)) { - rt2x00dev->default_ant.rx = - ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED); - rt2x00dev->default_ant.tx = - ANTENNA_B - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_FIXED); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) - rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY; - if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) - rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY; - } - - /* - * Store led settings, for correct led behaviour. - * If the eeprom value is invalid, - * switch to default led mode. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); - - rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - if (value == LED_MODE_SIGNAL_STRENGTH) - rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_QUALITY); - - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT, - rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_A)); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - return 0; -} - -/* - * RF value list for RF5225 & RF5325 - * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled - */ -static const struct rf_channel rf_vals_noseq[] = { - { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, - { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, - { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, - { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, - { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, - { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, - { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, - { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, - { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, - { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, - { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, - { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, - { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, - { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, - { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, - { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, - { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, - { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, - { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, - { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, - { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, - { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, - { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, - { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, - { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, - { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, - { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, - { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, - { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, - { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, - - /* 802.11 UNII */ - { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, - { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, - { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, - { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, - { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, - { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, - { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, - { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, - { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, -}; - -/* - * RF value list for RF5225 & RF5325 - * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled - */ -static const struct rf_channel rf_vals_seq[] = { - { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, - { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, - { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, - { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, - { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, - { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, - { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, - { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, - { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, - { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, - { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, - { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, - { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, - { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 }, - { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 }, - { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b }, - { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b }, - { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 }, - { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 }, - { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 }, - { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 }, - { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 }, - { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 }, - { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 }, - { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 }, - { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 }, - { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b }, - { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b }, - { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 }, - { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 }, - - /* 802.11 UNII */ - { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 }, - { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b }, - { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b }, - { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 }, - { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 }, - { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b }, - { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 }, - { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b }, - { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, -}; - -static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power; - unsigned int i; - - /* - * Disable powersaving as default. - */ - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - /* - * Initialize all hw fields. - */ - ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); - ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING); - ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * As rt61 has a global fallback table we cannot specify - * more then one tx rate per frame but since the hw will - * try several rates (based on the fallback table) we should - * initialize max_report_rates to the maximum number of rates - * we are going to try. Otherwise mac80211 will truncate our - * reported tx rates and the rc algortihm will end up with - * incorrect data. - */ - rt2x00dev->hw->max_rates = 1; - rt2x00dev->hw->max_report_rates = 7; - rt2x00dev->hw->max_rate_tries = 1; - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (!rt2x00_has_cap_rf_sequence(rt2x00dev)) { - spec->num_channels = 14; - spec->channels = rf_vals_noseq; - } else { - spec->num_channels = 14; - spec->channels = rf_vals_seq; - } - - if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_seq); - } - - /* - * Create channel information array - */ - info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); - } - - if (spec->num_channels > 14) { - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 14; i < spec->num_channels; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = - TXPOWER_FROM_DEV(tx_power[i - 14]); - } - } - - return 0; -} - -static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u32 reg; - - /* - * Disable power saving. - */ - rt2x00mmio_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007); - - /* - * Allocate eeprom data. - */ - retval = rt61pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt61pci_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2x00mmio_register_read(rt2x00dev, MAC_CSR13, ®); - rt2x00_set_field32(®, MAC_CSR13_DIR5, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_CSR13, reg); - - /* - * Initialize hw specifications. - */ - retval = rt61pci_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device has multiple filters for control frames, - * but has no a separate filter for PS Poll frames. - */ - __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); - - /* - * This device requires firmware and DMA mapped skbs. - */ - __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); - if (!modparam_nohwcrypt) - __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static int rt61pci_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - struct rt2x00_field32 field; - int retval; - u32 reg; - u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will - * update the queue settings and validate the input. After that - * we are free to update the registers based on the value - * in the queue parameter. - */ - retval = rt2x00mac_conf_tx(hw, vif, queue_idx, params); - if (retval) - return retval; - - /* - * We only need to perform additional register initialization - * for WMM queues. - */ - if (queue_idx >= 4) - return 0; - - queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ - offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2))); - field.bit_offset = (queue_idx & 1) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00mmio_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00mmio_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; - field.bit_mask = 0xf << field.bit_offset; - - rt2x00mmio_register_read(rt2x00dev, AIFSN_CSR, ®); - rt2x00_set_field32(®, field, queue->aifs); - rt2x00mmio_register_write(rt2x00dev, AIFSN_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, CWMIN_CSR, ®); - rt2x00_set_field32(®, field, queue->cw_min); - rt2x00mmio_register_write(rt2x00dev, CWMIN_CSR, reg); - - rt2x00mmio_register_read(rt2x00dev, CWMAX_CSR, ®); - rt2x00_set_field32(®, field, queue->cw_max); - rt2x00mmio_register_write(rt2x00dev, CWMAX_CSR, reg); - - return 0; -} - -static u64 rt61pci_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR13, ®); - tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; - rt2x00mmio_register_read(rt2x00dev, TXRX_CSR12, ®); - tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); - - return tsf; -} - -static const struct ieee80211_ops rt61pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_key = rt2x00mac_set_key, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt61pci_conf_tx, - .get_tsf = rt61pci_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, - .flush = rt2x00mac_flush, - .set_antenna = rt2x00mac_set_antenna, - .get_antenna = rt2x00mac_get_antenna, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { - .irq_handler = rt61pci_interrupt, - .txstatus_tasklet = rt61pci_txstatus_tasklet, - .tbtt_tasklet = rt61pci_tbtt_tasklet, - .rxdone_tasklet = rt61pci_rxdone_tasklet, - .autowake_tasklet = rt61pci_autowake_tasklet, - .probe_hw = rt61pci_probe_hw, - .get_firmware_name = rt61pci_get_firmware_name, - .check_firmware = rt61pci_check_firmware, - .load_firmware = rt61pci_load_firmware, - .initialize = rt2x00mmio_initialize, - .uninitialize = rt2x00mmio_uninitialize, - .get_entry_state = rt61pci_get_entry_state, - .clear_entry = rt61pci_clear_entry, - .set_device_state = rt61pci_set_device_state, - .rfkill_poll = rt61pci_rfkill_poll, - .link_stats = rt61pci_link_stats, - .reset_tuner = rt61pci_reset_tuner, - .link_tuner = rt61pci_link_tuner, - .start_queue = rt61pci_start_queue, - .kick_queue = rt61pci_kick_queue, - .stop_queue = rt61pci_stop_queue, - .flush_queue = rt2x00mmio_flush_queue, - .write_tx_desc = rt61pci_write_tx_desc, - .write_beacon = rt61pci_write_beacon, - .clear_beacon = rt61pci_clear_beacon, - .fill_rxdone = rt61pci_fill_rxdone, - .config_shared_key = rt61pci_config_shared_key, - .config_pairwise_key = rt61pci_config_pairwise_key, - .config_filter = rt61pci_config_filter, - .config_intf = rt61pci_config_intf, - .config_erp = rt61pci_config_erp, - .config_ant = rt61pci_config_ant, - .config = rt61pci_config, -}; - -static void rt61pci_queue_init(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_RX: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = RXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_BEACON: - queue->limit = 4; - queue->data_size = 0; /* No DMA required for beacons */ - queue->desc_size = TXINFO_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_ATIM: - /* fallthrough */ - default: - BUG(); - break; - } -} - -static const struct rt2x00_ops rt61pci_ops = { - .name = KBUILD_MODNAME, - .max_ap_intf = 4, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt61pci_queue_init, - .lib = &rt61pci_rt2x00_ops, - .hw = &rt61pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt61pci_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT61pci module information. - */ -static const struct pci_device_id rt61pci_device_table[] = { - /* RT2561s */ - { PCI_DEVICE(0x1814, 0x0301) }, - /* RT2561 v2 */ - { PCI_DEVICE(0x1814, 0x0302) }, - /* RT2661 */ - { PCI_DEVICE(0x1814, 0x0401) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 " - "PCI & PCMCIA chipset based cards"); -MODULE_DEVICE_TABLE(pci, rt61pci_device_table); -MODULE_FIRMWARE(FIRMWARE_RT2561); -MODULE_FIRMWARE(FIRMWARE_RT2561s); -MODULE_FIRMWARE(FIRMWARE_RT2661); -MODULE_LICENSE("GPL"); - -static int rt61pci_probe(struct pci_dev *pci_dev, - const struct pci_device_id *id) -{ - return rt2x00pci_probe(pci_dev, &rt61pci_ops); -} - -static struct pci_driver rt61pci_driver = { - .name = KBUILD_MODNAME, - .id_table = rt61pci_device_table, - .probe = rt61pci_probe, - .remove = rt2x00pci_remove, - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -module_pci_driver(rt61pci_driver); diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h deleted file mode 100644 index 1442075a8382..000000000000 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ /dev/null @@ -1,1500 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt61pci - Abstract: Data structures and registers for the rt61pci module. - Supported chipsets: RT2561, RT2561s, RT2661. - */ - -#ifndef RT61PCI_H -#define RT61PCI_H - -/* - * RT chip PCI IDs. - */ -#define RT2561s_PCI_ID 0x0301 -#define RT2561_PCI_ID 0x0302 -#define RT2661_PCI_ID 0x0401 - -/* - * RF chip defines. - */ -#define RF5225 0x0001 -#define RF5325 0x0002 -#define RF2527 0x0003 -#define RF2529 0x0004 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x3000 -#define CSR_REG_SIZE 0x04b0 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0080 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 4 - -/* - * PCI registers. - */ - -/* - * HOST_CMD_CSR: For HOST to interrupt embedded processor - */ -#define HOST_CMD_CSR 0x0008 -#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f) -#define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080) - -/* - * MCU_CNTL_CSR - * SELECT_BANK: Select 8051 program bank. - * RESET: Enable 8051 reset state. - * READY: Ready state for 8051. - */ -#define MCU_CNTL_CSR 0x000c -#define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001) -#define MCU_CNTL_CSR_RESET FIELD32(0x00000002) -#define MCU_CNTL_CSR_READY FIELD32(0x00000004) - -/* - * SOFT_RESET_CSR - * FORCE_CLOCK_ON: Host force MAC clock ON - */ -#define SOFT_RESET_CSR 0x0010 -#define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002) - -/* - * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register. - */ -#define MCU_INT_SOURCE_CSR 0x0014 -#define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001) -#define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002) -#define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004) -#define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008) -#define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010) -#define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020) -#define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040) -#define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080) -#define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100) -#define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200) - -/* - * MCU_INT_MASK_CSR: MCU interrupt source/mask register. - */ -#define MCU_INT_MASK_CSR 0x0018 -#define MCU_INT_MASK_CSR_0 FIELD32(0x00000001) -#define MCU_INT_MASK_CSR_1 FIELD32(0x00000002) -#define MCU_INT_MASK_CSR_2 FIELD32(0x00000004) -#define MCU_INT_MASK_CSR_3 FIELD32(0x00000008) -#define MCU_INT_MASK_CSR_4 FIELD32(0x00000010) -#define MCU_INT_MASK_CSR_5 FIELD32(0x00000020) -#define MCU_INT_MASK_CSR_6 FIELD32(0x00000040) -#define MCU_INT_MASK_CSR_7 FIELD32(0x00000080) -#define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100) -#define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200) - -/* - * PCI_USEC_CSR - */ -#define PCI_USEC_CSR 0x001c - -/* - * Security key table memory. - * 16 entries 32-byte for shared key table - * 64 entries 32-byte for pairwise key table - * 64 entries 8-byte for pairwise ta key table - */ -#define SHARED_KEY_TABLE_BASE 0x1000 -#define PAIRWISE_KEY_TABLE_BASE 0x1200 -#define PAIRWISE_TA_TABLE_BASE 0x1a00 - -#define SHARED_KEY_ENTRY(__idx) \ - ( SHARED_KEY_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_key_entry)) ) -#define PAIRWISE_KEY_ENTRY(__idx) \ - ( PAIRWISE_KEY_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_key_entry)) ) -#define PAIRWISE_TA_ENTRY(__idx) \ - ( PAIRWISE_TA_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __packed; - -struct hw_pairwise_ta_entry { - u8 address[6]; - u8 cipher; - u8 reserved; -} __packed; - -/* - * Other on-chip shared memory space. - */ -#define HW_CIS_BASE 0x2000 -#define HW_NULL_BASE 0x2b00 - -/* - * Since NULL frame won't be that long (256 byte), - * We steal 16 tail bytes to save debugging settings. - */ -#define HW_DEBUG_SETTING_BASE 0x2bf0 - -/* - * On-chip BEACON frame space. - */ -#define HW_BEACON_BASE0 0x2c00 -#define HW_BEACON_BASE1 0x2d00 -#define HW_BEACON_BASE2 0x2e00 -#define HW_BEACON_BASE3 0x2f00 - -#define HW_BEACON_OFFSET(__index) \ - ( HW_BEACON_BASE0 + (__index * 0x0100) ) - -/* - * HOST-MCU shared memory. - */ - -/* - * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. - */ -#define H2M_MAILBOX_CSR 0x2100 -#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD16(0x001f) -#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) -#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) -#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) -#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) -#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) -#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) -#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) -#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) -#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) -#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) -#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) - -/* - * M2H_CMD_DONE_CSR. - */ -#define M2H_CMD_DONE_CSR 0x2104 - -/* - * MCU_TXOP_ARRAY_BASE. - */ -#define MCU_TXOP_ARRAY_BASE 0x2110 - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - */ -#define MAC_CSR0 0x3000 -#define MAC_CSR0_REVISION FIELD32(0x0000000f) -#define MAC_CSR0_CHIPSET FIELD32(0x000ffff0) - -/* - * MAC_CSR1: System control register. - * SOFT_RESET: Software reset bit, 1: reset, 0: normal. - * BBP_RESET: Hardware reset BBP. - * HOST_READY: Host is ready after initialization, 1: ready. - */ -#define MAC_CSR1 0x3004 -#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) -#define MAC_CSR1_BBP_RESET FIELD32(0x00000002) -#define MAC_CSR1_HOST_READY FIELD32(0x00000004) - -/* - * MAC_CSR2: STA MAC register 0. - */ -#define MAC_CSR2 0x3008 -#define MAC_CSR2_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR2_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR3: STA MAC register 1. - * UNICAST_TO_ME_MASK: - * Used to mask off bits from byte 5 of the MAC address - * to determine the UNICAST_TO_ME bit for RX frames. - * The full mask is complemented by BSS_ID_MASK: - * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK - */ -#define MAC_CSR3 0x300c -#define MAC_CSR3_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR4: BSSID register 0. - */ -#define MAC_CSR4 0x3010 -#define MAC_CSR4_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR4_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR5: BSSID register 1. - * BSS_ID_MASK: - * This mask is used to mask off bits 0 and 1 of byte 5 of the - * BSSID. This will make sure that those bits will be ignored - * when determining the MY_BSS of RX frames. - * 0: 1-BSSID mode (BSS index = 0) - * 1: 2-BSSID mode (BSS index: Byte5, bit 0) - * 2: 2-BSSID mode (BSS index: byte5, bit 1) - * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1) - */ -#define MAC_CSR5 0x3014 -#define MAC_CSR5_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR6: Maximum frame length register. - */ -#define MAC_CSR6 0x3018 -#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) - -/* - * MAC_CSR7: Reserved - */ -#define MAC_CSR7 0x301c - -/* - * MAC_CSR8: SIFS/EIFS register. - * All units are in US. - */ -#define MAC_CSR8 0x3020 -#define MAC_CSR8_SIFS FIELD32(0x000000ff) -#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) -#define MAC_CSR8_EIFS FIELD32(0xffff0000) - -/* - * MAC_CSR9: Back-Off control register. - * SLOT_TIME: Slot time, default is 20us for 802.11BG. - * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). - * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). - * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. - */ -#define MAC_CSR9 0x3024 -#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) -#define MAC_CSR9_CWMIN FIELD32(0x00000f00) -#define MAC_CSR9_CWMAX FIELD32(0x0000f000) -#define MAC_CSR9_CW_SELECT FIELD32(0x00010000) - -/* - * MAC_CSR10: Power state configuration. - */ -#define MAC_CSR10 0x3028 - -/* - * MAC_CSR11: Power saving transition time register. - * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * WAKEUP_LATENCY: In unit of TU. - */ -#define MAC_CSR11 0x302c -#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) -#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) -#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) -#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) - -/* - * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). - * CURRENT_STATE: 0:sleep, 1:awake. - * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. - * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. - */ -#define MAC_CSR12 0x3030 -#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) -#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) -#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) -#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) - -/* - * MAC_CSR13: GPIO. - * MAC_CSR13_VALx: GPIO value - * MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input - */ -#define MAC_CSR13 0x3034 -#define MAC_CSR13_VAL0 FIELD32(0x00000001) -#define MAC_CSR13_VAL1 FIELD32(0x00000002) -#define MAC_CSR13_VAL2 FIELD32(0x00000004) -#define MAC_CSR13_VAL3 FIELD32(0x00000008) -#define MAC_CSR13_VAL4 FIELD32(0x00000010) -#define MAC_CSR13_VAL5 FIELD32(0x00000020) -#define MAC_CSR13_DIR0 FIELD32(0x00000100) -#define MAC_CSR13_DIR1 FIELD32(0x00000200) -#define MAC_CSR13_DIR2 FIELD32(0x00000400) -#define MAC_CSR13_DIR3 FIELD32(0x00000800) -#define MAC_CSR13_DIR4 FIELD32(0x00001000) -#define MAC_CSR13_DIR5 FIELD32(0x00002000) - -/* - * MAC_CSR14: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. - * SW_LED: s/w LED, 1: ON, 0: OFF. - * HW_LED_POLARITY: 0: active low, 1: active high. - */ -#define MAC_CSR14 0x3038 -#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) -#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) -#define MAC_CSR14_HW_LED FIELD32(0x00010000) -#define MAC_CSR14_SW_LED FIELD32(0x00020000) -#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) -#define MAC_CSR14_SW_LED2 FIELD32(0x00080000) - -/* - * MAC_CSR15: NAV control. - */ -#define MAC_CSR15 0x303c - -/* - * TXRX control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXRX_CSR0: TX/RX configuration register. - * TSF_OFFSET: Default is 24. - * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. - * DISABLE_RX: Disable Rx engine. - * DROP_CRC: Drop CRC error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TO_DS: Drop fram ToDs bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * DROP_MULTICAST: Drop multicast frames. - * DROP_BORADCAST: Drop broadcast frames. - * DROP_ACK_CTS: Drop received ACK and CTS. - */ -#define TXRX_CSR0 0x3040 -#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) -#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) -#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) -#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) -#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) -#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) -#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) -#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) -#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) -#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) -#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000) -#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) -#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) - -/* - * TXRX_CSR1 - */ -#define TXRX_CSR1 0x3044 -#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR2 - */ -#define TXRX_CSR2 0x3048 -#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR3 - */ -#define TXRX_CSR3 0x304c -#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR4: Auto-Responder/Tx-retry register. - * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. - * OFDM_TX_RATE_DOWN: 1:enable. - * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. - * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. - */ -#define TXRX_CSR4 0x3050 -#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) -#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) -#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) -#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) -#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) -#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) -#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) -#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) -#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) -#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) - -/* - * TXRX_CSR5 - */ -#define TXRX_CSR5 0x3054 - -/* - * TXRX_CSR6: ACK/CTS payload consumed time - */ -#define TXRX_CSR6 0x3058 - -/* - * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. - */ -#define TXRX_CSR7 0x305c -#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) -#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) -#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) -#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) - -/* - * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. - */ -#define TXRX_CSR8 0x3060 -#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) -#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) -#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) -#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) - -/* - * TXRX_CSR9: Synchronization control register. - * BEACON_INTERVAL: In unit of 1/16 TU. - * TSF_TICKING: Enable TSF auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * BEACON_GEN: Enable beacon generator. - */ -#define TXRX_CSR9 0x3064 -#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) -#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) -#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) -#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) -#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) -#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) - -/* - * TXRX_CSR10: BEACON alignment. - */ -#define TXRX_CSR10 0x3068 - -/* - * TXRX_CSR11: AES mask. - */ -#define TXRX_CSR11 0x306c - -/* - * TXRX_CSR12: TSF low 32. - */ -#define TXRX_CSR12 0x3070 -#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR13: TSF high 32. - */ -#define TXRX_CSR13 0x3074 -#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR14: TBTT timer. - */ -#define TXRX_CSR14 0x3078 - -/* - * TXRX_CSR15: TKIP MIC priority byte "AND" mask. - */ -#define TXRX_CSR15 0x307c - -/* - * PHY control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PHY_CSR0: RF/PS control. - */ -#define PHY_CSR0 0x3080 -#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) -#define PHY_CSR0_PA_PE_A FIELD32(0x00020000) - -/* - * PHY_CSR1 - */ -#define PHY_CSR1 0x3084 - -/* - * PHY_CSR2: Pre-TX BBP control. - */ -#define PHY_CSR2 0x3088 - -/* - * PHY_CSR3: BBP serial control register. - * VALUE: Register value to program into BBP. - * REG_NUM: Selected BBP register. - * READ_CONTROL: 0: Write BBP, 1: Read BBP. - * BUSY: 1: ASIC is busy execute BBP programming. - */ -#define PHY_CSR3 0x308c -#define PHY_CSR3_VALUE FIELD32(0x000000ff) -#define PHY_CSR3_REGNUM FIELD32(0x00007f00) -#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) -#define PHY_CSR3_BUSY FIELD32(0x00010000) - -/* - * PHY_CSR4: RF serial control register - * VALUE: Register value (include register id) serial out to RF/IF chip. - * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). - * IF_SELECT: 1: select IF to program, 0: select RF to program. - * PLL_LD: RF PLL_LD status. - * BUSY: 1: ASIC is busy execute RF programming. - */ -#define PHY_CSR4 0x3090 -#define PHY_CSR4_VALUE FIELD32(0x00ffffff) -#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) -#define PHY_CSR4_IF_SELECT FIELD32(0x20000000) -#define PHY_CSR4_PLL_LD FIELD32(0x40000000) -#define PHY_CSR4_BUSY FIELD32(0x80000000) - -/* - * PHY_CSR5: RX to TX signal switch timing control. - */ -#define PHY_CSR5 0x3094 -#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR6: TX to RX signal timing control. - */ -#define PHY_CSR6 0x3098 -#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR7: TX DAC switching timing control. - */ -#define PHY_CSR7 0x309c - -/* - * Security control register. - */ - -/* - * SEC_CSR0: Shared key table control. - */ -#define SEC_CSR0 0x30a0 -#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) -#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) -#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) -#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) -#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) -#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) -#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) -#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) -#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) -#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) -#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) -#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) -#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) -#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) -#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) -#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) - -/* - * SEC_CSR1: Shared key table security mode register. - */ -#define SEC_CSR1 0x30a4 -#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * Pairwise key table valid bitmap registers. - * SEC_CSR2: pairwise key table valid bitmap 0. - * SEC_CSR3: pairwise key table valid bitmap 1. - */ -#define SEC_CSR2 0x30a8 -#define SEC_CSR3 0x30ac - -/* - * SEC_CSR4: Pairwise key table lookup control. - */ -#define SEC_CSR4 0x30b0 -#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) -#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) -#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) -#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) - -/* - * SEC_CSR5: shared key table security mode register. - */ -#define SEC_CSR5 0x30b4 -#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * STA control registers. - */ - -/* - * STA_CSR0: RX PLCP error count & RX FCS error count. - */ -#define STA_CSR0 0x30c0 -#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) -#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR1: RX False CCA count & RX LONG frame count. - */ -#define STA_CSR1 0x30c4 -#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) -#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR2: TX Beacon count and RX FIFO overflow count. - */ -#define STA_CSR2 0x30c8 -#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) -#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) - -/* - * STA_CSR3: TX Beacon count. - */ -#define STA_CSR3 0x30cc -#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) - -/* - * STA_CSR4: TX Result status register. - * VALID: 1:This register contains a valid TX result. - */ -#define STA_CSR4 0x30d0 -#define STA_CSR4_VALID FIELD32(0x00000001) -#define STA_CSR4_TX_RESULT FIELD32(0x0000000e) -#define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0) -#define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00) -#define STA_CSR4_PID_TYPE FIELD32(0x0000e000) -#define STA_CSR4_TXRATE FIELD32(0x000f0000) - -/* - * QOS control registers. - */ - -/* - * QOS_CSR0: TXOP holder MAC address register. - */ -#define QOS_CSR0 0x30e0 -#define QOS_CSR0_BYTE0 FIELD32(0x000000ff) -#define QOS_CSR0_BYTE1 FIELD32(0x0000ff00) -#define QOS_CSR0_BYTE2 FIELD32(0x00ff0000) -#define QOS_CSR0_BYTE3 FIELD32(0xff000000) - -/* - * QOS_CSR1: TXOP holder MAC address register. - */ -#define QOS_CSR1 0x30e4 -#define QOS_CSR1_BYTE4 FIELD32(0x000000ff) -#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) - -/* - * QOS_CSR2: TXOP holder timeout register. - */ -#define QOS_CSR2 0x30e8 - -/* - * RX QOS-CFPOLL MAC address register. - * QOS_CSR3: RX QOS-CFPOLL MAC address 0. - * QOS_CSR4: RX QOS-CFPOLL MAC address 1. - */ -#define QOS_CSR3 0x30ec -#define QOS_CSR4 0x30f0 - -/* - * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. - */ -#define QOS_CSR5 0x30f4 - -/* - * Host DMA registers. - */ - -/* - * AC0_BASE_CSR: AC_VO base address. - */ -#define AC0_BASE_CSR 0x3400 -#define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC1_BASE_CSR: AC_VI base address. - */ -#define AC1_BASE_CSR 0x3404 -#define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC2_BASE_CSR: AC_BE base address. - */ -#define AC2_BASE_CSR 0x3408 -#define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC3_BASE_CSR: AC_BK base address. - */ -#define AC3_BASE_CSR 0x340c -#define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * MGMT_BASE_CSR: MGMT ring base address. - */ -#define MGMT_BASE_CSR 0x3410 -#define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * TX_RING_CSR0: TX Ring size for AC_VO, AC_VI, AC_BE, AC_BK. - */ -#define TX_RING_CSR0 0x3418 -#define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff) -#define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00) -#define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000) -#define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000) - -/* - * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring - * TXD_SIZE: In unit of 32-bit. - */ -#define TX_RING_CSR1 0x341c -#define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff) -#define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00) -#define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000) - -/* - * AIFSN_CSR: AIFSN for each EDCA AC. - * AIFSN0: For AC_VO. - * AIFSN1: For AC_VI. - * AIFSN2: For AC_BE. - * AIFSN3: For AC_BK. - */ -#define AIFSN_CSR 0x3420 -#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) -#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) -#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) -#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) - -/* - * CWMIN_CSR: CWmin for each EDCA AC. - * CWMIN0: For AC_VO. - * CWMIN1: For AC_VI. - * CWMIN2: For AC_BE. - * CWMIN3: For AC_BK. - */ -#define CWMIN_CSR 0x3424 -#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) -#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) -#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) -#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) - -/* - * CWMAX_CSR: CWmax for each EDCA AC. - * CWMAX0: For AC_VO. - * CWMAX1: For AC_VI. - * CWMAX2: For AC_BE. - * CWMAX3: For AC_BK. - */ -#define CWMAX_CSR 0x3428 -#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) -#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) -#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) -#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) - -/* - * TX_DMA_DST_CSR: TX DMA destination - * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid - */ -#define TX_DMA_DST_CSR 0x342c -#define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003) -#define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c) -#define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030) -#define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0) -#define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300) - -/* - * TX_CNTL_CSR: KICK/Abort TX. - * KICK_TX_AC0: For AC_VO. - * KICK_TX_AC1: For AC_VI. - * KICK_TX_AC2: For AC_BE. - * KICK_TX_AC3: For AC_BK. - * ABORT_TX_AC0: For AC_VO. - * ABORT_TX_AC1: For AC_VI. - * ABORT_TX_AC2: For AC_BE. - * ABORT_TX_AC3: For AC_BK. - */ -#define TX_CNTL_CSR 0x3430 -#define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001) -#define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002) -#define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004) -#define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008) -#define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010) -#define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000) -#define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000) -#define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000) -#define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000) -#define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000) - -/* - * LOAD_TX_RING_CSR: Load RX desriptor - */ -#define LOAD_TX_RING_CSR 0x3434 -#define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008) -#define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010) - -/* - * Several read-only registers, for debugging. - */ -#define AC0_TXPTR_CSR 0x3438 -#define AC1_TXPTR_CSR 0x343c -#define AC2_TXPTR_CSR 0x3440 -#define AC3_TXPTR_CSR 0x3444 -#define MGMT_TXPTR_CSR 0x3448 - -/* - * RX_BASE_CSR - */ -#define RX_BASE_CSR 0x3450 -#define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * RX_RING_CSR. - * RXD_SIZE: In unit of 32-bit. - */ -#define RX_RING_CSR 0x3454 -#define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff) -#define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00) -#define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000) - -/* - * RX_CNTL_CSR - */ -#define RX_CNTL_CSR 0x3458 -#define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001) -#define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002) - -/* - * RXPTR_CSR: Read-only, for debugging. - */ -#define RXPTR_CSR 0x345c - -/* - * PCI_CFG_CSR - */ -#define PCI_CFG_CSR 0x3460 - -/* - * BUF_FORMAT_CSR - */ -#define BUF_FORMAT_CSR 0x3464 - -/* - * INT_SOURCE_CSR: Interrupt source register. - * Write one to clear corresponding bit. - */ -#define INT_SOURCE_CSR 0x3468 -#define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001) -#define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002) -#define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004) -#define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010) -#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000) -#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000) -#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000) -#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000) -#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000) -#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000) - -/* - * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. - * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock. - */ -#define INT_MASK_CSR 0x346c -#define INT_MASK_CSR_TXDONE FIELD32(0x00000001) -#define INT_MASK_CSR_RXDONE FIELD32(0x00000002) -#define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004) -#define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010) -#define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080) -#define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00) -#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000) -#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000) -#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000) -#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000) -#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000) -#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000) - -/* - * E2PROM_CSR: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - * LOAD_STATUS: 1:loading, 0:done. - */ -#define E2PROM_CSR 0x3470 -#define E2PROM_CSR_RELOAD FIELD32(0x00000001) -#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002) -#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004) -#define E2PROM_CSR_DATA_IN FIELD32(0x00000008) -#define E2PROM_CSR_DATA_OUT FIELD32(0x00000010) -#define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020) -#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) - -/* - * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register. - * AC0_TX_OP: For AC_VO, in unit of 32us. - * AC1_TX_OP: For AC_VI, in unit of 32us. - */ -#define AC_TXOP_CSR0 0x3474 -#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) - -/* - * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register. - * AC2_TX_OP: For AC_BE, in unit of 32us. - * AC3_TX_OP: For AC_BK, in unit of 32us. - */ -#define AC_TXOP_CSR1 0x3478 -#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) - -/* - * DMA_STATUS_CSR - */ -#define DMA_STATUS_CSR 0x3480 - -/* - * TEST_MODE_CSR - */ -#define TEST_MODE_CSR 0x3484 - -/* - * UART0_TX_CSR - */ -#define UART0_TX_CSR 0x3488 - -/* - * UART0_RX_CSR - */ -#define UART0_RX_CSR 0x348c - -/* - * UART0_FRAME_CSR - */ -#define UART0_FRAME_CSR 0x3490 - -/* - * UART0_BUFFER_CSR - */ -#define UART0_BUFFER_CSR 0x3494 - -/* - * IO_CNTL_CSR - * RF_PS: Set RF interface value to power save - */ -#define IO_CNTL_CSR 0x3498 -#define IO_CNTL_CSR_RF_PS FIELD32(0x00000004) - -/* - * UART_INT_SOURCE_CSR - */ -#define UART_INT_SOURCE_CSR 0x34a8 - -/* - * UART_INT_MASK_CSR - */ -#define UART_INT_MASK_CSR 0x34ac - -/* - * PBF_QUEUE_CSR - */ -#define PBF_QUEUE_CSR 0x34b0 - -/* - * Firmware DMA registers. - * Firmware DMA registers are dedicated for MCU usage - * and should not be touched by host driver. - * Therefore we skip the definition of these registers. - */ -#define FW_TX_BASE_CSR 0x34c0 -#define FW_TX_START_CSR 0x34c4 -#define FW_TX_LAST_CSR 0x34c8 -#define FW_MODE_CNTL_CSR 0x34cc -#define FW_TXPTR_CSR 0x34d0 - -/* - * 8051 firmware image. - */ -#define FIRMWARE_RT2561 "rt2561.bin" -#define FIRMWARE_RT2561s "rt2561s.bin" -#define FIRMWARE_RT2661 "rt2661.bin" -#define FIRMWARE_IMAGE_BASE 0x4000 - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2 - */ -#define BBP_R2_BG_MODE FIELD8(0x20) - -/* - * R3 - */ -#define BBP_R3_SMART_MODE FIELD8(0x01) - -/* - * R4: RX antenna control - * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) - */ - -/* - * ANTENNA_CONTROL semantics (guessed): - * 0x1: Software controlled antenna switching (fixed or SW diversity) - * 0x2: Hardware diversity. - */ -#define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03) -#define BBP_R4_RX_FRAME_END FIELD8(0x20) - -/* - * R77 - */ -#define BBP_R77_RX_ANTENNA FIELD8(0x03) - -/* - * RF registers - */ - -/* - * RF 3 - */ -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * RF 4 - */ -#define RF4_FREQ_OFFSET FIELD32(0x0003f000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x0010 -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * ENABLE_DIVERSITY: 1:enable, 0:disable. - * EXTERNAL_LNA_BG: External LNA enable for 2.4G. - * CARDBUS_ACCEL: 0:enable, 1:disable. - * EXTERNAL_LNA_A: External LNA enable for 5G. - */ -#define EEPROM_NIC 0x0011 -#define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001) -#define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002) -#define EEPROM_NIC_RX_FIXED FIELD16(0x0004) -#define EEPROM_NIC_TX_FIXED FIELD16(0x0008) -#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010) -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020) -#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040) - -/* - * EEPROM geography. - * GEO_A: Default geographical setting for 5GHz band - * GEO: Default geographical setting. - */ -#define EEPROM_GEOGRAPHY 0x0012 -#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) -#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0013 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11G - */ -#define EEPROM_TXPOWER_G_START 0x0023 -#define EEPROM_TXPOWER_G_SIZE 7 -#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_G_2 FIELD16(0xff00) - -/* - * EEPROM Frequency - */ -#define EEPROM_FREQ 0x002f -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) -#define EEPROM_FREQ_SEQ FIELD16(0x0300) - -/* - * EEPROM LED. - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED 0x0030 -#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A_START 0x0031 -#define EEPROM_TXPOWER_A_SIZE 12 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11BG - */ -#define EEPROM_RSSI_OFFSET_BG 0x004d -#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11A - */ -#define EEPROM_RSSI_OFFSET_A 0x004e -#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) - -/* - * MCU mailbox commands. - */ -#define MCU_SLEEP 0x30 -#define MCU_WAKEUP 0x31 -#define MCU_LED 0x50 -#define MCU_LED_STRENGTH 0x52 - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 16 * sizeof(__le32) ) -#define TXINFO_SIZE ( 6 * sizeof(__le32) ) -#define RXD_DESC_SIZE ( 16 * sizeof(__le32) ) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. - * KEY_TABLE: Use per-client pairwise KEY table. - * KEY_INDEX: - * Key index (0~31) to the pairwise KEY table. - * 0~3 to shared KEY table 0 (BSS0). - * 4~7 to shared KEY table 1 (BSS1). - * 8~11 to shared KEY table 2 (BSS2). - * 12~15 to shared KEY table 3 (BSS3). - * BURST: Next frame belongs to same "burst" event. - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_MORE_FRAG FIELD32(0x00000004) -#define TXD_W0_ACK FIELD32(0x00000008) -#define TXD_W0_TIMESTAMP FIELD32(0x00000010) -#define TXD_W0_OFDM FIELD32(0x00000020) -#define TXD_W0_IFS FIELD32(0x00000040) -#define TXD_W0_RETRY_MODE FIELD32(0x00000080) -#define TXD_W0_TKIP_MIC FIELD32(0x00000100) -#define TXD_W0_KEY_TABLE FIELD32(0x00000200) -#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_BURST FIELD32(0x10000000) -#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * HOST_Q_ID: EDCA/HCCA queue ID. - * HW_SEQUENCE: MAC overwrites the frame sequence number. - * BUFFER_COUNT: Number of buffers in this TXD. - */ -#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) -#define TXD_W1_AIFSN FIELD32(0x000000f0) -#define TXD_W1_CWMIN FIELD32(0x00000f00) -#define TXD_W1_CWMAX FIELD32(0x0000f000) -#define TXD_W1_IV_OFFSET FIELD32(0x003f0000) -#define TXD_W1_PIGGY_BACK FIELD32(0x01000000) -#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) -#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) - -/* - * Word2: PLCP information - */ -#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word3 - */ -#define TXD_W3_IV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define TXD_W4_EIV FIELD32(0xffffffff) - -/* - * Word5 - * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). - * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler. - * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler. - * WAITING_DMA_DONE_INT: TXD been filled with data - * and waiting for TxDoneISR housekeeping. - */ -#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) -#define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00) -#define TXD_W5_PID_TYPE FIELD32(0x0000e000) -#define TXD_W5_TX_POWER FIELD32(0x00ff0000) -#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) - -/* - * the above 24-byte is called TXINFO and will be DMAed to MAC block - * through TXFIFO. MAC block use this TXINFO to control the transmission - * behavior of this frame. - * The following fields are not used by MAC block. - * They are used by DMA block and HOST driver only. - * Once a frame has been DMA to ASIC, all the following fields are useless - * to ASIC. - */ - -/* - * Word6-10: Buffer physical address - */ -#define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) - -/* - * Word11-13: Buffer length - */ -#define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff) -#define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000) -#define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff) -#define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000) -#define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff) - -/* - * Word14 - */ -#define TXD_W14_SK_BUFFER FIELD32(0xffffffff) - -/* - * Word15 - */ -#define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. - * KEY_INDEX: Decryption key actually used. - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_DROP FIELD32(0x00000002) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) -#define RXD_W0_MULTICAST FIELD32(0x00000008) -#define RXD_W0_BROADCAST FIELD32(0x00000010) -#define RXD_W0_MY_BSS FIELD32(0x00000020) -#define RXD_W0_CRC_ERROR FIELD32(0x00000040) -#define RXD_W0_OFDM FIELD32(0x00000080) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) -#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * SIGNAL: RX raw data rate reported by BBP. - */ -#define RXD_W1_SIGNAL FIELD32(0x000000ff) -#define RXD_W1_RSSI_AGC FIELD32(0x00001f00) -#define RXD_W1_RSSI_LNA FIELD32(0x00006000) -#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) - -/* - * Word2 - * IV: Received IV of originally encrypted. - */ -#define RXD_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - * EIV: Received EIV of originally encrypted. - */ -#define RXD_W3_EIV FIELD32(0xffffffff) - -/* - * Word4 - * ICV: Received ICV of originally encrypted. - * NOTE: This is a guess, the official definition is "reserved" - */ -#define RXD_W4_ICV FIELD32(0xffffffff) - -/* - * the above 20-byte is called RXINFO and will be DMAed to MAC RX block - * and passed to the HOST driver. - * The following fields are for DMA block and HOST usage only. - * Can't be touched by ASIC MAC block. - */ - -/* - * Word5 - */ -#define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) - -/* - * Word6-15: Reserved - */ -#define RXD_W6_RESERVED FIELD32(0xffffffff) -#define RXD_W7_RESERVED FIELD32(0xffffffff) -#define RXD_W8_RESERVED FIELD32(0xffffffff) -#define RXD_W9_RESERVED FIELD32(0xffffffff) -#define RXD_W10_RESERVED FIELD32(0xffffffff) -#define RXD_W11_RESERVED FIELD32(0xffffffff) -#define RXD_W12_RESERVED FIELD32(0xffffffff) -#define RXD_W13_RESERVED FIELD32(0xffffffff) -#define RXD_W14_RESERVED FIELD32(0xffffffff) -#define RXD_W15_RESERVED FIELD32(0xffffffff) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ - (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) - -#endif /* RT61PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c deleted file mode 100644 index 7081e13b4fd6..000000000000 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ /dev/null @@ -1,2548 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt73usb - Abstract: rt73usb device specific routines. - Supported chipsets: rt2571W & rt2671. - */ - -#include <linux/crc-itu-t.h> -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/usb.h> - -#include "rt2x00.h" -#include "rt2x00usb.h" -#include "rt73usb.h" - -/* - * Allow hardware encryption to be disabled. - */ -static bool modparam_nohwcrypt; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00usb_register_read and rt2x00usb_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - * The _lock versions must be used if you already hold the csr_mutex - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) - -static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - - rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - - rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); - /* - * RF5225 and RF2527 contain 21 bits per RF register value, - * all others contain 20 bits. - */ - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, - 20 + (rt2x00_rf(rt2x00dev, RF5225) || - rt2x00_rf(rt2x00dev, RF2527))); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt73usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00usb_register_read, - .write = rt2x00usb_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt73usb_bbp_read, - .write = rt73usb_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt73usb_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®); - return rt2x00_get_field32(reg, MAC_CSR13_VAL7); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt73usb_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int a_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - - if (led->type == LED_TYPE_RADIO) { - rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, - MCU_LEDCS_RADIO_STATUS, enabled); - - rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, - 0, led->rt2x00dev->led_mcu_reg, - REGISTER_TIMEOUT); - } else if (led->type == LED_TYPE_ASSOC) { - rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, - MCU_LEDCS_LINK_BG_STATUS, bg_mode); - rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, - MCU_LEDCS_LINK_A_STATUS, a_mode); - - rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, - 0, led->rt2x00dev->led_mcu_reg, - REGISTER_TIMEOUT); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * this means we need to convert the brightness - * argument into the matching level within that range. - */ - rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, - brightness / (LED_FULL / 6), - led->rt2x00dev->led_mcu_reg, - REGISTER_TIMEOUT); - } -} - -static int rt73usb_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00usb_register_read(led->rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); - rt2x00usb_register_write(led->rt2x00dev, MAC_CSR14, reg); - - return 0; -} - -static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt73usb_brightness_set; - led->led_dev.blink_set = rt73usb_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - u32 mask; - u32 reg; - - if (crypto->cmd == SET_KEY) { - /* - * rt2x00lib can't determine the correct free - * key_idx for shared keys. We have 1 register - * with key valid bits. The goal is simple, read - * the register, if that is full we have no slots - * left. - * Note that each BSS is allowed to have up to 4 - * shared keys, so put a mask over the allowed - * entries. - */ - mask = (0xf << crypto->bssidx); - - rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®); - reg &= mask; - - if (reg && reg == mask) - return -ENOSPC; - - key->hw_key_idx += reg ? ffz(reg) : 0; - - /* - * Upload key to hardware - */ - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - reg = SHARED_KEY_ENTRY(key->hw_key_idx); - rt2x00usb_register_multiwrite(rt2x00dev, reg, - &key_entry, sizeof(key_entry)); - - /* - * The cipher types are stored over 2 registers. - * bssidx 0 and 1 keys are stored in SEC_CSR1 and - * bssidx 1 and 2 keys are stored in SEC_CSR5. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - if (key->hw_key_idx < 8) { - field.bit_offset = (3 * key->hw_key_idx); - field.bit_mask = 0x7 << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, SEC_CSR1, ®); - rt2x00_set_field32(®, field, crypto->cipher); - rt2x00usb_register_write(rt2x00dev, SEC_CSR1, reg); - } else { - field.bit_offset = (3 * (key->hw_key_idx - 8)); - field.bit_mask = 0x7 << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, SEC_CSR5, ®); - rt2x00_set_field32(®, field, crypto->cipher); - rt2x00usb_register_write(rt2x00dev, SEC_CSR5, reg); - } - - /* - * The driver does not support the IV/EIV generation - * in hardware. However it doesn't support the IV/EIV - * inside the ieee80211 frame either, but requires it - * to be provided separately for the descriptor. - * rt2x00lib will cut the IV/EIV data out of all frames - * given to us by mac80211, but we must tell mac80211 - * to generate the IV/EIV data. - */ - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - } - - /* - * SEC_CSR0 contains only single-bit fields to indicate - * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead we use - * a calculation to determine the correct bit directly. - */ - mask = 1 << key->hw_key_idx; - - rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®); - if (crypto->cmd == SET_KEY) - reg |= mask; - else if (crypto->cmd == DISABLE_KEY) - reg &= ~mask; - rt2x00usb_register_write(rt2x00dev, SEC_CSR0, reg); - - return 0; -} - -static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_pairwise_ta_entry addr_entry; - struct hw_key_entry key_entry; - u32 mask; - u32 reg; - - if (crypto->cmd == SET_KEY) { - /* - * rt2x00lib can't determine the correct free - * key_idx for pairwise keys. We have 2 registers - * with key valid bits. The goal is simple, read - * the first register, if that is full move to - * the next register. - * When both registers are full, we drop the key, - * otherwise we use the first invalid entry. - */ - rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®); - if (reg && reg == ~0) { - key->hw_key_idx = 32; - rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®); - if (reg && reg == ~0) - return -ENOSPC; - } - - key->hw_key_idx += reg ? ffz(reg) : 0; - - /* - * Upload key to hardware - */ - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - rt2x00usb_register_multiwrite(rt2x00dev, reg, - &key_entry, sizeof(key_entry)); - - /* - * Send the address and cipher type to the hardware register. - */ - memset(&addr_entry, 0, sizeof(addr_entry)); - memcpy(&addr_entry, crypto->address, ETH_ALEN); - addr_entry.cipher = crypto->cipher; - - reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); - rt2x00usb_register_multiwrite(rt2x00dev, reg, - &addr_entry, sizeof(addr_entry)); - - /* - * Enable pairwise lookup table for given BSS idx, - * without this received frames will not be decrypted - * by the hardware. - */ - rt2x00usb_register_read(rt2x00dev, SEC_CSR4, ®); - reg |= (1 << crypto->bssidx); - rt2x00usb_register_write(rt2x00dev, SEC_CSR4, reg); - - /* - * The driver does not support the IV/EIV generation - * in hardware. However it doesn't support the IV/EIV - * inside the ieee80211 frame either, but requires it - * to be provided separately for the descriptor. - * rt2x00lib will cut the IV/EIV data out of all frames - * given to us by mac80211, but we must tell mac80211 - * to generate the IV/EIV data. - */ - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - } - - /* - * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate - * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead we use - * a calculation to determine the correct bit directly. - */ - if (key->hw_key_idx < 32) { - mask = 1 << key->hw_key_idx; - - rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®); - if (crypto->cmd == SET_KEY) - reg |= mask; - else if (crypto->cmd == DISABLE_KEY) - reg &= ~mask; - rt2x00usb_register_write(rt2x00dev, SEC_CSR2, reg); - } else { - mask = 1 << (key->hw_key_idx - 32); - - rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®); - if (crypto->cmd == SET_KEY) - reg |= mask; - else if (crypto->cmd == DISABLE_KEY) - reg &= ~mask; - rt2x00usb_register_write(rt2x00dev, SEC_CSR3, reg); - } - - return 0; -} - -static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); -} - -static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Enable synchronisation. - */ - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR2, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); - conf->bssid[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR4, - conf->bssid, sizeof(conf->bssid)); - } -} - -static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp, - u32 changed) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32); - rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!erp->short_preamble); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); - } - - if (changed & BSS_CHANGED_BASIC_RATES) - rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, - erp->basic_rates); - - if (changed & BSS_CHANGED_BEACON_INT) { - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - } - - if (changed & BSS_CHANGED_ERP_SLOT) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); - rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); - - rt2x00usb_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); - rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg); - } -} - -static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r3; - u8 r4; - u8 r77; - u8 temp; - - rt73usb_bbp_read(rt2x00dev, 3, &r3); - rt73usb_bbp_read(rt2x00dev, 4, &r4); - rt73usb_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); - temp = !rt2x00_has_cap_frame_type(rt2x00dev) && - (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); - else - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); - else - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); - break; - } - - rt73usb_bbp_write(rt2x00dev, 77, r77); - rt73usb_bbp_write(rt2x00dev, 3, r3); - rt73usb_bbp_write(rt2x00dev, 4, r4); -} - -static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r3; - u8 r4; - u8 r77; - - rt73usb_bbp_read(rt2x00dev, 3, &r3); - rt73usb_bbp_read(rt2x00dev, 4, &r4); - rt73usb_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !rt2x00_has_cap_frame_type(rt2x00dev)); - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); - break; - case ANTENNA_A: - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); - break; - } - - rt73usb_bbp_write(rt2x00dev, 77, r77); - rt73usb_bbp_write(rt2x00dev, 3, r3); - rt73usb_bbp_write(rt2x00dev, 4, r4); -} - -struct antenna_sel { - u8 word; - /* - * value[0] -> non-LNA - * value[1] -> LNA - */ - u8 value[2]; -}; - -static const struct antenna_sel antenna_sel_a[] = { - { 96, { 0x58, 0x78 } }, - { 104, { 0x38, 0x48 } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x60, 0x60 } }, - { 97, { 0x58, 0x58 } }, - { 98, { 0x58, 0x58 } }, -}; - -static const struct antenna_sel antenna_sel_bg[] = { - { 96, { 0x48, 0x68 } }, - { 104, { 0x2c, 0x3c } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x50, 0x50 } }, - { 97, { 0x48, 0x48 } }, - { 98, { 0x48, 0x48 } }, -}; - -static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - const struct antenna_sel *sel; - unsigned int lna; - unsigned int i; - u32 reg; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - sel = antenna_sel_a; - lna = rt2x00_has_cap_external_lna_a(rt2x00dev); - } else { - sel = antenna_sel_bg; - lna = rt2x00_has_cap_external_lna_bg(rt2x00dev); - } - - for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) - rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); - - rt2x00usb_register_read(rt2x00dev, PHY_CSR0, ®); - - rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, - (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)); - rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, - (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)); - - rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg); - - if (rt2x00_rf(rt2x00dev, RF5226) || rt2x00_rf(rt2x00dev, RF5225)) - rt73usb_config_antenna_5x(rt2x00dev, ant); - else if (rt2x00_rf(rt2x00dev, RF2528) || rt2x00_rf(rt2x00dev, RF2527)) - rt73usb_config_antenna_2x(rt2x00dev, ant); -} - -static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain = 0; - - if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) - lna_gain += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r3; - u8 r94; - u8 smart; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527)); - - rt73usb_bbp_read(rt2x00dev, 3, &r3); - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); - rt73usb_bbp_write(rt2x00dev, 3, r3); - - r94 = 6; - if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) - r94 += txpower - MAX_TXPOWER; - else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) - r94 += txpower; - rt73usb_bbp_write(rt2x00dev, 94, r94); - - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); - - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); - - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(10); -} - -static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - struct rf_channel rf; - - rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); - rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); - rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); - rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); - - rt73usb_config_channel(rt2x00dev, &rf, txpower); -} - -static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1); - rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_RATE_STEP, 0); - rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0); - rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); -} - -static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR11, ®); - rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, - rt2x00dev->beacon_int - 10); - rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5); - - /* We must first disable autowake before it can be enabled */ - rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); - rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg); - - rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 1); - rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, - USB_MODE_SLEEP, REGISTER_TIMEOUT); - } else { - rt2x00usb_register_read(rt2x00dev, MAC_CSR11, ®); - rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, 0); - rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0); - rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); - rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 0); - rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, - USB_MODE_WAKEUP, REGISTER_TIMEOUT); - } -} - -static void rt73usb_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt73usb_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt73usb_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & IEEE80211_CONF_CHANGE_POWER) && - !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) - rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt73usb_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt73usb_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®); - qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®); - qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); -} - -static inline void rt73usb_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt73usb_bbp_write(rt2x00dev, 17, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt73usb_set_vgc(rt2x00dev, qual, 0x20); -} - -static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - u8 up_bound; - u8 low_bound; - - /* - * Determine r17 bounds. - */ - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - low_bound = 0x28; - up_bound = 0x48; - - if (rt2x00_has_cap_external_lna_a(rt2x00dev)) { - low_bound += 0x10; - up_bound += 0x10; - } - } else { - if (qual->rssi > -82) { - low_bound = 0x1c; - up_bound = 0x40; - } else if (qual->rssi > -84) { - low_bound = 0x1c; - up_bound = 0x20; - } else { - low_bound = 0x1c; - up_bound = 0x1c; - } - - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { - low_bound += 0x14; - up_bound += 0x10; - } - } - - /* - * If we are not associated, we should go straight to the - * dynamic CCA tuning. - */ - if (!rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * Special big-R17 for very short distance - */ - if (qual->rssi > -35) { - rt73usb_set_vgc(rt2x00dev, qual, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (qual->rssi >= -58) { - rt73usb_set_vgc(rt2x00dev, qual, up_bound); - return; - } - - /* - * Special big-R17 for middle-short distance - */ - if (qual->rssi >= -66) { - rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x10); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (qual->rssi >= -74) { - rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x08); - return; - } - - /* - * Special case: Change up_bound based on the rssi. - * Lower up_bound when rssi is weaker then -74 dBm. - */ - up_bound -= 2 * (-74 - qual->rssi); - if (low_bound > up_bound) - up_bound = low_bound; - - if (qual->vgc_level > up_bound) { - rt73usb_set_vgc(rt2x00dev, qual, up_bound); - return; - } - -dynamic_cca_tune: - - /* - * r17 does not yet exceed upper limit, continue and base - * the r17 tuning on the false CCA count. - */ - if ((qual->false_cca > 512) && (qual->vgc_level < up_bound)) - rt73usb_set_vgc(rt2x00dev, qual, - min_t(u8, qual->vgc_level + 4, up_bound)); - else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound)) - rt73usb_set_vgc(rt2x00dev, qual, - max_t(u8, qual->vgc_level - 4, low_bound)); -} - -/* - * Queue handlers. - */ -static void rt73usb_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - break; - case QID_BEACON: - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - break; - default: - break; - } -} - -static void rt73usb_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 1); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - break; - case QID_BEACON: - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - break; - default: - break; - } -} - -/* - * Firmware functions - */ -static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) -{ - return FIRMWARE_RT2571; -} - -static int rt73usb_check_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - u16 fw_crc; - u16 crc; - - /* - * Only support 2kb firmware files. - */ - if (len != 2048) - return FW_BAD_LENGTH; - - /* - * The last 2 bytes in the firmware array are the crc checksum itself, - * this means that we should never pass those 2 bytes to the crc - * algorithm. - */ - fw_crc = (data[len - 2] << 8 | data[len - 1]); - - /* - * Use the crc itu-t algorithm. - */ - crc = crc_itu_t(0, data, len - 2); - crc = crc_itu_t_byte(crc, 0); - crc = crc_itu_t_byte(crc, 0); - - return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; -} - -static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, - const u8 *data, const size_t len) -{ - unsigned int i; - int status; - u32 reg; - - /* - * Wait for stable hardware. - */ - for (i = 0; i < 100; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg) - break; - msleep(1); - } - - if (!reg) { - rt2x00_err(rt2x00dev, "Unstable hardware\n"); - return -EBUSY; - } - - /* - * Write firmware to device. - */ - rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len); - - /* - * Send firmware request to device to load firmware, - * we need to specify a long timeout time. - */ - status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, - 0, USB_MODE_FIRMWARE, - REGISTER_TIMEOUT_FIRMWARE); - if (status < 0) { - rt2x00_err(rt2x00dev, "Failed to write Firmware to device\n"); - return status; - } - - return 0; -} - -/* - * Initialization functions. - */ -static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); - rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR1, reg); - - /* - * CCK TXD BBP registers - */ - rt2x00usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR2, reg); - - /* - * OFDM TXD BBP registers - */ - rt2x00usb_register_read(rt2x00dev, TXRX_CSR3, ®); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR3, reg); - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR7, ®); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR7, reg); - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR8, ®); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR8, reg); - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - - rt2x00usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); - - rt2x00usb_register_read(rt2x00dev, MAC_CSR6, ®); - rt2x00_set_field32(®, MAC_CSR6_MAX_FRAME_UNIT, 0xfff); - rt2x00usb_register_write(rt2x00dev, MAC_CSR6, reg); - - rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00); - - /* - * Invalidate all Shared Keys (SEC_CSR0), - * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) - */ - rt2x00usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000); - rt2x00usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000); - rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000); - - reg = 0x000023b0; - if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527)) - rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1); - rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg); - - rt2x00usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06); - rt2x00usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); - rt2x00usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); - - rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); - rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); - - /* - * Clear all beacons - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®); - rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®); - rt2x00usb_register_read(rt2x00dev, STA_CSR2, ®); - - /* - * Reset MAC and BBP registers. - */ - rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); - - return 0; -} - -static int rt73usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) { - rt73usb_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} - -static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt73usb_bbp_write(rt2x00dev, 3, 0x80); - rt73usb_bbp_write(rt2x00dev, 15, 0x30); - rt73usb_bbp_write(rt2x00dev, 21, 0xc8); - rt73usb_bbp_write(rt2x00dev, 22, 0x38); - rt73usb_bbp_write(rt2x00dev, 23, 0x06); - rt73usb_bbp_write(rt2x00dev, 24, 0xfe); - rt73usb_bbp_write(rt2x00dev, 25, 0x0a); - rt73usb_bbp_write(rt2x00dev, 26, 0x0d); - rt73usb_bbp_write(rt2x00dev, 32, 0x0b); - rt73usb_bbp_write(rt2x00dev, 34, 0x12); - rt73usb_bbp_write(rt2x00dev, 37, 0x07); - rt73usb_bbp_write(rt2x00dev, 39, 0xf8); - rt73usb_bbp_write(rt2x00dev, 41, 0x60); - rt73usb_bbp_write(rt2x00dev, 53, 0x10); - rt73usb_bbp_write(rt2x00dev, 54, 0x18); - rt73usb_bbp_write(rt2x00dev, 60, 0x10); - rt73usb_bbp_write(rt2x00dev, 61, 0x04); - rt73usb_bbp_write(rt2x00dev, 62, 0x04); - rt73usb_bbp_write(rt2x00dev, 75, 0xfe); - rt73usb_bbp_write(rt2x00dev, 86, 0xfe); - rt73usb_bbp_write(rt2x00dev, 88, 0xfe); - rt73usb_bbp_write(rt2x00dev, 90, 0x0f); - rt73usb_bbp_write(rt2x00dev, 99, 0x00); - rt73usb_bbp_write(rt2x00dev, 102, 0x16); - rt73usb_bbp_write(rt2x00dev, 107, 0x04); - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt73usb_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -/* - * Device state switch handlers. - */ -static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (unlikely(rt73usb_init_registers(rt2x00dev) || - rt73usb_init_bbp(rt2x00dev))) - return -EIO; - - return 0; -} - -static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); - - /* - * Disable synchronisation. - */ - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, 0); - - rt2x00usb_disable_radio(rt2x00dev); -} - -static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) -{ - u32 reg, reg2; - unsigned int i; - char put_to_sleep; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®); - rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); - rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); - rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®2); - state = rt2x00_get_field32(reg2, MAC_CSR12_BBP_CURRENT_STATE); - if (state == !put_to_sleep) - return 0; - rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg); - msleep(10); - } - - return -EBUSY; -} - -static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt73usb_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt73usb_disable_radio(rt2x00dev); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - /* No support, but no error either */ - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt73usb_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt73usb_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - __le32 *txd = (__le32 *) entry->skb->data; - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - (txdesc->rate_mode == RATE_MODE_OFDM)); - rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, - test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, - test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); - rt2x00_set_field32(&word, TXD_W0_BURST2, - test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); - rt2x00_desc_write(txd, 0, word); - - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, entry->queue->qid); - rt2x00_set_field32(&word, TXD_W1_AIFSN, entry->queue->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, - test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->u.plcp.signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->u.plcp.service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, - txdesc->u.plcp.length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, - txdesc->u.plcp.length_high); - rt2x00_desc_write(txd, 2, word); - - if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { - _rt2x00_desc_write(txd, 3, skbdesc->iv[0]); - _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); - } - - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power)); - rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); - rt2x00_desc_write(txd, 5, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->flags |= SKBDESC_DESC_IN_SKB; - skbdesc->desc = txd; - skbdesc->desc_len = TXD_DESC_SIZE; -} - -/* - * TX data initialization - */ -static void rt73usb_write_beacon(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - unsigned int beacon_base; - unsigned int padding_len; - u32 orig_reg, reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); - orig_reg = reg; - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * Add space for the descriptor in front of the skb. - */ - skb_push(entry->skb, TXD_DESC_SIZE); - memset(entry->skb->data, 0, TXD_DESC_SIZE); - - /* - * Write the TX descriptor for the beacon. - */ - rt73usb_write_tx_desc(entry, txdesc); - - /* - * Dump beacon to userspace through debugfs. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - - /* - * Write entire beacon with descriptor and padding to register. - */ - padding_len = roundup(entry->skb->len, 4) - entry->skb->len; - if (padding_len && skb_pad(entry->skb, padding_len)) { - rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n"); - /* skb freed by skb_pad() on failure */ - entry->skb = NULL; - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, orig_reg); - return; - } - - beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data, - entry->skb->len + padding_len); - - /* - * Enable beaconing again. - * - * For Wi-Fi faily generated beacons between participating stations. - * Set TBTT phase adaptive adjustment step to 8us (default 16us) - */ - rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); - - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * Clean up the beacon skb. - */ - dev_kfree_skb(entry->skb); - entry->skb = NULL; -} - -static void rt73usb_clear_beacon(struct queue_entry *entry) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - unsigned int beacon_base; - u32 orig_reg, reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &orig_reg); - reg = orig_reg; - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * Clear beacon. - */ - beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_register_write(rt2x00dev, beacon_base, 0); - - /* - * Restore beaconing state. - */ - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, orig_reg); -} - -static int rt73usb_get_tx_data_len(struct queue_entry *entry) -{ - int length; - - /* - * The length _must_ be a multiple of 4, - * but it must _not_ be a multiple of the USB packet size. - */ - length = roundup(entry->skb->len, 4); - length += (4 * !(length % entry->queue->usb_maxpacket)); - - return length; -} - -/* - * RX control handlers - */ -static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) -{ - u8 offset = rt2x00dev->lna_gain; - u8 lna; - - lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); - switch (lna) { - case 3: - offset += 90; - break; - case 2: - offset += 74; - break; - case 1: - offset += 64; - break; - default: - return 0; - } - - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { - if (rt2x00_has_cap_external_lna_a(rt2x00dev)) { - if (lna == 3 || lna == 2) - offset += 10; - } else { - if (lna == 3) - offset += 6; - else if (lna == 2) - offset += 8; - } - } - - return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; -} - -static void rt73usb_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - __le32 *rxd = (__le32 *)entry->skb->data; - u32 word0; - u32 word1; - - /* - * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of - * frame data in rt2x00usb. - */ - memcpy(skbdesc->desc, rxd, skbdesc->desc_len); - rxd = (__le32 *)skbdesc->desc; - - /* - * It is now safe to read the descriptor on all architectures. - */ - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 1, &word1); - - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - - rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); - rxdesc->cipher_status = rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); - - if (rxdesc->cipher != CIPHER_NONE) { - _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]); - _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]); - rxdesc->dev_flags |= RXDONE_CRYPTO_IV; - - _rt2x00_desc_read(rxd, 4, &rxdesc->icv); - rxdesc->dev_flags |= RXDONE_CRYPTO_ICV; - - /* - * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. It has provided the data separately but rt2x00lib - * should decide if it should be reinserted. - */ - rxdesc->flags |= RX_FLAG_IV_STRIPPED; - - /* - * The hardware has already checked the Michael Mic and has - * stripped it from the frame. Signal this to mac80211. - */ - rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; - - if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) - rxdesc->flags |= RX_FLAG_DECRYPTED; - else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) - rxdesc->flags |= RX_FLAG_MMIC_ERROR; - } - - /* - * Obtain the status about this packet. - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 100kbit/s. - */ - rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1); - rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - if (rt2x00_get_field32(word0, RXD_W0_OFDM)) - rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; - else - rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; - if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; - - /* - * Set skb pointers, and update frame information. - */ - skb_pull(entry->skb, entry->queue->desc_size); - skb_trim(entry->skb, rxdesc->size); -} - -/* - * Device probe functions. - */ -static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - u8 *mac; - s8 value; - - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - eth_random_addr(mac); - rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, - ANTENNA_B); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, - ANTENNA_B); - rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0); - rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, - LED_MODE_DEFAULT); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); - rt2x00_eeprom_dbg(rt2x00dev, "Led: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - rt2x00_eeprom_dbg(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - rt2x00_eeprom_dbg(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - } - - return 0; -} - -static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET), - value, rt2x00_get_field32(reg, MAC_CSR0_REVISION)); - - if (!rt2x00_rt(rt2x00dev, RT2573) || (rt2x00_rev(rt2x00dev) == 0)) { - rt2x00_err(rt2x00dev, "Invalid RT chipset detected\n"); - return -ENODEV; - } - - if (!rt2x00_rf(rt2x00dev, RF5226) && - !rt2x00_rf(rt2x00dev, RF2528) && - !rt2x00_rf(rt2x00dev, RF5225) && - !rt2x00_rf(rt2x00dev, RF2527)) { - rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Read the Frame type. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) - __set_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags); - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); - - /* - * Read frequency offset. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Read external LNA informations. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) { - __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); - } - - /* - * Store led settings, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); - - rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt73usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - if (value == LED_MODE_SIGNAL_STRENGTH) - rt73usb_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_QUALITY); - - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT, - rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_A)); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - return 0; -} - -/* - * RF value list for RF2528 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2528[] = { - { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b }, - { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f }, - { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b }, - { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f }, - { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b }, - { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f }, - { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b }, - { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f }, - { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b }, - { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f }, - { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b }, - { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f }, - { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b }, - { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 }, -}; - -/* - * RF value list for RF5226 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5226[] = { - { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b }, - { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f }, - { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b }, - { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f }, - { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b }, - { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f }, - { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b }, - { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f }, - { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b }, - { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f }, - { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b }, - { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f }, - { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b }, - { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 }, - { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 }, - { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b }, - { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 }, - { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b }, - { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 }, - { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 }, - { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 }, - { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b }, - { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 }, - { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b }, - { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 }, - { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 }, - { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b }, - { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 }, - { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b }, - { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 }, - - /* 802.11 UNII */ - { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 }, - { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f }, - { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 }, - { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 }, - { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f }, - { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b }, - { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 }, - { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b }, - { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 }, -}; - -/* - * RF value list for RF5225 & RF2527 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5225_2527[] = { - { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, - { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, - { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, - { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, - { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, - { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, - { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, - { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, - { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, - { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, - { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, - { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, - { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, - { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, - { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, - { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, - { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, - { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, - { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, - { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, - { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, - { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, - { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, - { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, - { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, - { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, - { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, - { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, - { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, - { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, - - /* 802.11 UNII */ - { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, - { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, - { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, - { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, - { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, - { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, - { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, - { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, - { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, -}; - - -static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power; - unsigned int i; - - /* - * Initialize all hw fields. - * - * Don't set IEEE80211_HOST_BROADCAST_PS_BUFFERING unless we are - * capable of sending the buffered frames out after the DTIM - * transmission using rt2x00lib_beacondone. This will send out - * multicast and broadcast traffic immediately instead of buffering it - * infinitly and thus dropping it after some time. - */ - ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); - ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(rt2x00dev, RF2528)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528); - spec->channels = rf_vals_bg_2528; - } else if (rt2x00_rf(rt2x00dev, RF5226)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_5226); - spec->channels = rf_vals_5226; - } else if (rt2x00_rf(rt2x00dev, RF2527)) { - spec->num_channels = 14; - spec->channels = rf_vals_5225_2527; - } else if (rt2x00_rf(rt2x00dev, RF5225)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527); - spec->channels = rf_vals_5225_2527; - } - - /* - * Create channel information array - */ - info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); - } - - if (spec->num_channels > 14) { - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 14; i < spec->num_channels; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = - TXPOWER_FROM_DEV(tx_power[i - 14]); - } - } - - return 0; -} - -static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u32 reg; - - /* - * Allocate eeprom data. - */ - retval = rt73usb_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt73usb_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®); - rt2x00_set_field32(®, MAC_CSR13_DIR7, 0); - rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg); - - /* - * Initialize hw specifications. - */ - retval = rt73usb_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device has multiple filters for control frames, - * but has no a separate filter for PS Poll frames. - */ - __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); - - /* - * This device requires firmware. - */ - __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); - if (!modparam_nohwcrypt) - __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static int rt73usb_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - struct rt2x00_field32 field; - int retval; - u32 reg; - u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will - * update the queue settings and validate the input. After that - * we are free to update the registers based on the value - * in the queue parameter. - */ - retval = rt2x00mac_conf_tx(hw, vif, queue_idx, params); - if (retval) - return retval; - - /* - * We only need to perform additional register initialization - * for WMM queues/ - */ - if (queue_idx >= 4) - return 0; - - queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ - offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2))); - field.bit_offset = (queue_idx & 1) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; - field.bit_mask = 0xf << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, AIFSN_CSR, ®); - rt2x00_set_field32(®, field, queue->aifs); - rt2x00usb_register_write(rt2x00dev, AIFSN_CSR, reg); - - rt2x00usb_register_read(rt2x00dev, CWMIN_CSR, ®); - rt2x00_set_field32(®, field, queue->cw_min); - rt2x00usb_register_write(rt2x00dev, CWMIN_CSR, reg); - - rt2x00usb_register_read(rt2x00dev, CWMAX_CSR, ®); - rt2x00_set_field32(®, field, queue->cw_max); - rt2x00usb_register_write(rt2x00dev, CWMAX_CSR, reg); - - return 0; -} - -static u64 rt73usb_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TXRX_CSR13, ®); - tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; - rt2x00usb_register_read(rt2x00dev, TXRX_CSR12, ®); - tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); - - return tsf; -} - -static const struct ieee80211_ops rt73usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_tim = rt2x00mac_set_tim, - .set_key = rt2x00mac_set_key, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt73usb_conf_tx, - .get_tsf = rt73usb_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, - .flush = rt2x00mac_flush, - .set_antenna = rt2x00mac_set_antenna, - .get_antenna = rt2x00mac_get_antenna, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { - .probe_hw = rt73usb_probe_hw, - .get_firmware_name = rt73usb_get_firmware_name, - .check_firmware = rt73usb_check_firmware, - .load_firmware = rt73usb_load_firmware, - .initialize = rt2x00usb_initialize, - .uninitialize = rt2x00usb_uninitialize, - .clear_entry = rt2x00usb_clear_entry, - .set_device_state = rt73usb_set_device_state, - .rfkill_poll = rt73usb_rfkill_poll, - .link_stats = rt73usb_link_stats, - .reset_tuner = rt73usb_reset_tuner, - .link_tuner = rt73usb_link_tuner, - .watchdog = rt2x00usb_watchdog, - .start_queue = rt73usb_start_queue, - .kick_queue = rt2x00usb_kick_queue, - .stop_queue = rt73usb_stop_queue, - .flush_queue = rt2x00usb_flush_queue, - .write_tx_desc = rt73usb_write_tx_desc, - .write_beacon = rt73usb_write_beacon, - .clear_beacon = rt73usb_clear_beacon, - .get_tx_data_len = rt73usb_get_tx_data_len, - .fill_rxdone = rt73usb_fill_rxdone, - .config_shared_key = rt73usb_config_shared_key, - .config_pairwise_key = rt73usb_config_pairwise_key, - .config_filter = rt73usb_config_filter, - .config_intf = rt73usb_config_intf, - .config_erp = rt73usb_config_erp, - .config_ant = rt73usb_config_ant, - .config = rt73usb_config, -}; - -static void rt73usb_queue_init(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_RX: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = RXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_BEACON: - queue->limit = 4; - queue->data_size = MGMT_FRAME_SIZE; - queue->desc_size = TXINFO_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_usb); - break; - - case QID_ATIM: - /* fallthrough */ - default: - BUG(); - break; - } -} - -static const struct rt2x00_ops rt73usb_ops = { - .name = KBUILD_MODNAME, - .max_ap_intf = 4, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt73usb_queue_init, - .lib = &rt73usb_rt2x00_ops, - .hw = &rt73usb_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt73usb_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * rt73usb module information. - */ -static struct usb_device_id rt73usb_device_table[] = { - /* AboCom */ - { USB_DEVICE(0x07b8, 0xb21b) }, - { USB_DEVICE(0x07b8, 0xb21c) }, - { USB_DEVICE(0x07b8, 0xb21d) }, - { USB_DEVICE(0x07b8, 0xb21e) }, - { USB_DEVICE(0x07b8, 0xb21f) }, - /* AL */ - { USB_DEVICE(0x14b2, 0x3c10) }, - /* Amigo */ - { USB_DEVICE(0x148f, 0x9021) }, - { USB_DEVICE(0x0eb0, 0x9021) }, - /* AMIT */ - { USB_DEVICE(0x18c5, 0x0002) }, - /* Askey */ - { USB_DEVICE(0x1690, 0x0722) }, - /* ASUS */ - { USB_DEVICE(0x0b05, 0x1723) }, - { USB_DEVICE(0x0b05, 0x1724) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x7050) }, /* FCC ID: K7SF5D7050B ver. 3.x */ - { USB_DEVICE(0x050d, 0x705a) }, - { USB_DEVICE(0x050d, 0x905b) }, - { USB_DEVICE(0x050d, 0x905c) }, - /* Billionton */ - { USB_DEVICE(0x1631, 0xc019) }, - { USB_DEVICE(0x08dd, 0x0120) }, - /* Buffalo */ - { USB_DEVICE(0x0411, 0x00d8) }, - { USB_DEVICE(0x0411, 0x00d9) }, - { USB_DEVICE(0x0411, 0x00e6) }, - { USB_DEVICE(0x0411, 0x00f4) }, - { USB_DEVICE(0x0411, 0x0116) }, - { USB_DEVICE(0x0411, 0x0119) }, - { USB_DEVICE(0x0411, 0x0137) }, - /* CEIVA */ - { USB_DEVICE(0x178d, 0x02be) }, - /* CNet */ - { USB_DEVICE(0x1371, 0x9022) }, - { USB_DEVICE(0x1371, 0x9032) }, - /* Conceptronic */ - { USB_DEVICE(0x14b2, 0x3c22) }, - /* Corega */ - { USB_DEVICE(0x07aa, 0x002e) }, - /* D-Link */ - { USB_DEVICE(0x07d1, 0x3c03) }, - { USB_DEVICE(0x07d1, 0x3c04) }, - { USB_DEVICE(0x07d1, 0x3c06) }, - { USB_DEVICE(0x07d1, 0x3c07) }, - /* Edimax */ - { USB_DEVICE(0x7392, 0x7318) }, - { USB_DEVICE(0x7392, 0x7618) }, - /* EnGenius */ - { USB_DEVICE(0x1740, 0x3701) }, - /* Gemtek */ - { USB_DEVICE(0x15a9, 0x0004) }, - /* Gigabyte */ - { USB_DEVICE(0x1044, 0x8008) }, - { USB_DEVICE(0x1044, 0x800a) }, - /* Huawei-3Com */ - { USB_DEVICE(0x1472, 0x0009) }, - /* Hercules */ - { USB_DEVICE(0x06f8, 0xe002) }, - { USB_DEVICE(0x06f8, 0xe010) }, - { USB_DEVICE(0x06f8, 0xe020) }, - /* Linksys */ - { USB_DEVICE(0x13b1, 0x0020) }, - { USB_DEVICE(0x13b1, 0x0023) }, - { USB_DEVICE(0x13b1, 0x0028) }, - /* MSI */ - { USB_DEVICE(0x0db0, 0x4600) }, - { USB_DEVICE(0x0db0, 0x6877) }, - { USB_DEVICE(0x0db0, 0x6874) }, - { USB_DEVICE(0x0db0, 0xa861) }, - { USB_DEVICE(0x0db0, 0xa874) }, - /* Ovislink */ - { USB_DEVICE(0x1b75, 0x7318) }, - /* Ralink */ - { USB_DEVICE(0x04bb, 0x093d) }, - { USB_DEVICE(0x148f, 0x2573) }, - { USB_DEVICE(0x148f, 0x2671) }, - { USB_DEVICE(0x0812, 0x3101) }, - /* Qcom */ - { USB_DEVICE(0x18e8, 0x6196) }, - { USB_DEVICE(0x18e8, 0x6229) }, - { USB_DEVICE(0x18e8, 0x6238) }, - /* Samsung */ - { USB_DEVICE(0x04e8, 0x4471) }, - /* Senao */ - { USB_DEVICE(0x1740, 0x7100) }, - /* Sitecom */ - { USB_DEVICE(0x0df6, 0x0024) }, - { USB_DEVICE(0x0df6, 0x0027) }, - { USB_DEVICE(0x0df6, 0x002f) }, - { USB_DEVICE(0x0df6, 0x90ac) }, - { USB_DEVICE(0x0df6, 0x9712) }, - /* Surecom */ - { USB_DEVICE(0x0769, 0x31f3) }, - /* Tilgin */ - { USB_DEVICE(0x6933, 0x5001) }, - /* Philips */ - { USB_DEVICE(0x0471, 0x200a) }, - /* Planex */ - { USB_DEVICE(0x2019, 0xab01) }, - { USB_DEVICE(0x2019, 0xab50) }, - /* WideTell */ - { USB_DEVICE(0x7167, 0x3840) }, - /* Zcom */ - { USB_DEVICE(0x0cde, 0x001c) }, - /* ZyXEL */ - { USB_DEVICE(0x0586, 0x3415) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards"); -MODULE_DEVICE_TABLE(usb, rt73usb_device_table); -MODULE_FIRMWARE(FIRMWARE_RT2571); -MODULE_LICENSE("GPL"); - -static int rt73usb_probe(struct usb_interface *usb_intf, - const struct usb_device_id *id) -{ - return rt2x00usb_probe(usb_intf, &rt73usb_ops); -} - -static struct usb_driver rt73usb_driver = { - .name = KBUILD_MODNAME, - .id_table = rt73usb_device_table, - .probe = rt73usb_probe, - .disconnect = rt2x00usb_disconnect, - .suspend = rt2x00usb_suspend, - .resume = rt2x00usb_resume, - .reset_resume = rt2x00usb_resume, - .disable_hub_initiated_lpm = 1, -}; - -module_usb_driver(rt73usb_driver); diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h deleted file mode 100644 index 4a4f235466d1..000000000000 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ /dev/null @@ -1,1079 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt73usb - Abstract: Data structures and registers for the rt73usb module. - Supported chipsets: rt2571W & rt2671. - */ - -#ifndef RT73USB_H -#define RT73USB_H - -/* - * RF chip defines. - */ -#define RF5226 0x0001 -#define RF2528 0x0002 -#define RF5225 0x0003 -#define RF2527 0x0004 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x3000 -#define CSR_REG_SIZE 0x04b0 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0080 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 4 - -/* - * USB registers. - */ - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD16(0x001f) -#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) -#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) -#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) -#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) -#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) -#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) -#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) -#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) -#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) -#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) -#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) - -/* - * 8051 firmware image. - */ -#define FIRMWARE_RT2571 "rt73.bin" -#define FIRMWARE_IMAGE_BASE 0x0800 - -/* - * Security key table memory. - * 16 entries 32-byte for shared key table - * 64 entries 32-byte for pairwise key table - * 64 entries 8-byte for pairwise ta key table - */ -#define SHARED_KEY_TABLE_BASE 0x1000 -#define PAIRWISE_KEY_TABLE_BASE 0x1200 -#define PAIRWISE_TA_TABLE_BASE 0x1a00 - -#define SHARED_KEY_ENTRY(__idx) \ - ( SHARED_KEY_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_key_entry)) ) -#define PAIRWISE_KEY_ENTRY(__idx) \ - ( PAIRWISE_KEY_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_key_entry)) ) -#define PAIRWISE_TA_ENTRY(__idx) \ - ( PAIRWISE_TA_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __packed; - -struct hw_pairwise_ta_entry { - u8 address[6]; - u8 cipher; - u8 reserved; -} __packed; - -/* - * Since NULL frame won't be that long (256 byte), - * We steal 16 tail bytes to save debugging settings. - */ -#define HW_DEBUG_SETTING_BASE 0x2bf0 - -/* - * On-chip BEACON frame space. - */ -#define HW_BEACON_BASE0 0x2400 -#define HW_BEACON_BASE1 0x2500 -#define HW_BEACON_BASE2 0x2600 -#define HW_BEACON_BASE3 0x2700 - -#define HW_BEACON_OFFSET(__index) \ - ( HW_BEACON_BASE0 + (__index * 0x0100) ) - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - */ -#define MAC_CSR0 0x3000 -#define MAC_CSR0_REVISION FIELD32(0x0000000f) -#define MAC_CSR0_CHIPSET FIELD32(0x000ffff0) - -/* - * MAC_CSR1: System control register. - * SOFT_RESET: Software reset bit, 1: reset, 0: normal. - * BBP_RESET: Hardware reset BBP. - * HOST_READY: Host is ready after initialization, 1: ready. - */ -#define MAC_CSR1 0x3004 -#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) -#define MAC_CSR1_BBP_RESET FIELD32(0x00000002) -#define MAC_CSR1_HOST_READY FIELD32(0x00000004) - -/* - * MAC_CSR2: STA MAC register 0. - */ -#define MAC_CSR2 0x3008 -#define MAC_CSR2_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR2_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR3: STA MAC register 1. - * UNICAST_TO_ME_MASK: - * Used to mask off bits from byte 5 of the MAC address - * to determine the UNICAST_TO_ME bit for RX frames. - * The full mask is complemented by BSS_ID_MASK: - * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK - */ -#define MAC_CSR3 0x300c -#define MAC_CSR3_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR4: BSSID register 0. - */ -#define MAC_CSR4 0x3010 -#define MAC_CSR4_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR4_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR5: BSSID register 1. - * BSS_ID_MASK: - * This mask is used to mask off bits 0 and 1 of byte 5 of the - * BSSID. This will make sure that those bits will be ignored - * when determining the MY_BSS of RX frames. - * 0: 1-BSSID mode (BSS index = 0) - * 1: 2-BSSID mode (BSS index: Byte5, bit 0) - * 2: 2-BSSID mode (BSS index: byte5, bit 1) - * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1) - */ -#define MAC_CSR5 0x3014 -#define MAC_CSR5_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR6: Maximum frame length register. - */ -#define MAC_CSR6 0x3018 -#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) - -/* - * MAC_CSR7: Reserved - */ -#define MAC_CSR7 0x301c - -/* - * MAC_CSR8: SIFS/EIFS register. - * All units are in US. - */ -#define MAC_CSR8 0x3020 -#define MAC_CSR8_SIFS FIELD32(0x000000ff) -#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) -#define MAC_CSR8_EIFS FIELD32(0xffff0000) - -/* - * MAC_CSR9: Back-Off control register. - * SLOT_TIME: Slot time, default is 20us for 802.11BG. - * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). - * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). - * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. - */ -#define MAC_CSR9 0x3024 -#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) -#define MAC_CSR9_CWMIN FIELD32(0x00000f00) -#define MAC_CSR9_CWMAX FIELD32(0x0000f000) -#define MAC_CSR9_CW_SELECT FIELD32(0x00010000) - -/* - * MAC_CSR10: Power state configuration. - */ -#define MAC_CSR10 0x3028 - -/* - * MAC_CSR11: Power saving transition time register. - * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * WAKEUP_LATENCY: In unit of TU. - */ -#define MAC_CSR11 0x302c -#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) -#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) -#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) -#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) - -/* - * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). - * CURRENT_STATE: 0:sleep, 1:awake. - * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. - * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. - */ -#define MAC_CSR12 0x3030 -#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) -#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) -#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) -#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) - -/* - * MAC_CSR13: GPIO. - * MAC_CSR13_VALx: GPIO value - * MAC_CSR13_DIRx: GPIO direction: 0 = input; 1 = output - */ -#define MAC_CSR13 0x3034 -#define MAC_CSR13_VAL0 FIELD32(0x00000001) -#define MAC_CSR13_VAL1 FIELD32(0x00000002) -#define MAC_CSR13_VAL2 FIELD32(0x00000004) -#define MAC_CSR13_VAL3 FIELD32(0x00000008) -#define MAC_CSR13_VAL4 FIELD32(0x00000010) -#define MAC_CSR13_VAL5 FIELD32(0x00000020) -#define MAC_CSR13_VAL6 FIELD32(0x00000040) -#define MAC_CSR13_VAL7 FIELD32(0x00000080) -#define MAC_CSR13_DIR0 FIELD32(0x00000100) -#define MAC_CSR13_DIR1 FIELD32(0x00000200) -#define MAC_CSR13_DIR2 FIELD32(0x00000400) -#define MAC_CSR13_DIR3 FIELD32(0x00000800) -#define MAC_CSR13_DIR4 FIELD32(0x00001000) -#define MAC_CSR13_DIR5 FIELD32(0x00002000) -#define MAC_CSR13_DIR6 FIELD32(0x00004000) -#define MAC_CSR13_DIR7 FIELD32(0x00008000) - -/* - * MAC_CSR14: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. - * SW_LED: s/w LED, 1: ON, 0: OFF. - * HW_LED_POLARITY: 0: active low, 1: active high. - */ -#define MAC_CSR14 0x3038 -#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) -#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) -#define MAC_CSR14_HW_LED FIELD32(0x00010000) -#define MAC_CSR14_SW_LED FIELD32(0x00020000) -#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) -#define MAC_CSR14_SW_LED2 FIELD32(0x00080000) - -/* - * MAC_CSR15: NAV control. - */ -#define MAC_CSR15 0x303c - -/* - * TXRX control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXRX_CSR0: TX/RX configuration register. - * TSF_OFFSET: Default is 24. - * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. - * DISABLE_RX: Disable Rx engine. - * DROP_CRC: Drop CRC error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TO_DS: Drop fram ToDs bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * DROP_MULTICAST: Drop multicast frames. - * DROP_BORADCAST: Drop broadcast frames. - * DROP_ACK_CTS: Drop received ACK and CTS. - */ -#define TXRX_CSR0 0x3040 -#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) -#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) -#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) -#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) -#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) -#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) -#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) -#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) -#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) -#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) -#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000) -#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) -#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) - -/* - * TXRX_CSR1 - */ -#define TXRX_CSR1 0x3044 -#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR2 - */ -#define TXRX_CSR2 0x3048 -#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR3 - */ -#define TXRX_CSR3 0x304c -#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR4: Auto-Responder/Tx-retry register. - * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. - * OFDM_TX_RATE_DOWN: 1:enable. - * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. - * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. - */ -#define TXRX_CSR4 0x3050 -#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) -#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) -#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) -#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) -#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) -#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) -#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) -#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) -#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) -#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) - -/* - * TXRX_CSR5 - */ -#define TXRX_CSR5 0x3054 - -/* - * TXRX_CSR6: ACK/CTS payload consumed time - */ -#define TXRX_CSR6 0x3058 - -/* - * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. - */ -#define TXRX_CSR7 0x305c -#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) -#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) -#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) -#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) - -/* - * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. - */ -#define TXRX_CSR8 0x3060 -#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) -#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) -#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) -#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) - -/* - * TXRX_CSR9: Synchronization control register. - * BEACON_INTERVAL: In unit of 1/16 TU. - * TSF_TICKING: Enable TSF auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * BEACON_GEN: Enable beacon generator. - */ -#define TXRX_CSR9 0x3064 -#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) -#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) -#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) -#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) -#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) -#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) - -/* - * TXRX_CSR10: BEACON alignment. - */ -#define TXRX_CSR10 0x3068 - -/* - * TXRX_CSR11: AES mask. - */ -#define TXRX_CSR11 0x306c - -/* - * TXRX_CSR12: TSF low 32. - */ -#define TXRX_CSR12 0x3070 -#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR13: TSF high 32. - */ -#define TXRX_CSR13 0x3074 -#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR14: TBTT timer. - */ -#define TXRX_CSR14 0x3078 - -/* - * TXRX_CSR15: TKIP MIC priority byte "AND" mask. - */ -#define TXRX_CSR15 0x307c - -/* - * PHY control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PHY_CSR0: RF/PS control. - */ -#define PHY_CSR0 0x3080 -#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) -#define PHY_CSR0_PA_PE_A FIELD32(0x00020000) - -/* - * PHY_CSR1 - */ -#define PHY_CSR1 0x3084 -#define PHY_CSR1_RF_RPI FIELD32(0x00010000) - -/* - * PHY_CSR2: Pre-TX BBP control. - */ -#define PHY_CSR2 0x3088 - -/* - * PHY_CSR3: BBP serial control register. - * VALUE: Register value to program into BBP. - * REG_NUM: Selected BBP register. - * READ_CONTROL: 0: Write BBP, 1: Read BBP. - * BUSY: 1: ASIC is busy execute BBP programming. - */ -#define PHY_CSR3 0x308c -#define PHY_CSR3_VALUE FIELD32(0x000000ff) -#define PHY_CSR3_REGNUM FIELD32(0x00007f00) -#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) -#define PHY_CSR3_BUSY FIELD32(0x00010000) - -/* - * PHY_CSR4: RF serial control register - * VALUE: Register value (include register id) serial out to RF/IF chip. - * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). - * IF_SELECT: 1: select IF to program, 0: select RF to program. - * PLL_LD: RF PLL_LD status. - * BUSY: 1: ASIC is busy execute RF programming. - */ -#define PHY_CSR4 0x3090 -#define PHY_CSR4_VALUE FIELD32(0x00ffffff) -#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) -#define PHY_CSR4_IF_SELECT FIELD32(0x20000000) -#define PHY_CSR4_PLL_LD FIELD32(0x40000000) -#define PHY_CSR4_BUSY FIELD32(0x80000000) - -/* - * PHY_CSR5: RX to TX signal switch timing control. - */ -#define PHY_CSR5 0x3094 -#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR6: TX to RX signal timing control. - */ -#define PHY_CSR6 0x3098 -#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR7: TX DAC switching timing control. - */ -#define PHY_CSR7 0x309c - -/* - * Security control register. - */ - -/* - * SEC_CSR0: Shared key table control. - */ -#define SEC_CSR0 0x30a0 -#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) -#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) -#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) -#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) -#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) -#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) -#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) -#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) -#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) -#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) -#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) -#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) -#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) -#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) -#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) -#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) - -/* - * SEC_CSR1: Shared key table security mode register. - */ -#define SEC_CSR1 0x30a4 -#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * Pairwise key table valid bitmap registers. - * SEC_CSR2: pairwise key table valid bitmap 0. - * SEC_CSR3: pairwise key table valid bitmap 1. - */ -#define SEC_CSR2 0x30a8 -#define SEC_CSR3 0x30ac - -/* - * SEC_CSR4: Pairwise key table lookup control. - */ -#define SEC_CSR4 0x30b0 -#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) -#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) -#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) -#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) - -/* - * SEC_CSR5: shared key table security mode register. - */ -#define SEC_CSR5 0x30b4 -#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * STA control registers. - */ - -/* - * STA_CSR0: RX PLCP error count & RX FCS error count. - */ -#define STA_CSR0 0x30c0 -#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) -#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR1: RX False CCA count & RX LONG frame count. - */ -#define STA_CSR1 0x30c4 -#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) -#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR2: TX Beacon count and RX FIFO overflow count. - */ -#define STA_CSR2 0x30c8 -#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) -#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) - -/* - * STA_CSR3: TX Beacon count. - */ -#define STA_CSR3 0x30cc -#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) - -/* - * STA_CSR4: TX Retry count. - */ -#define STA_CSR4 0x30d0 -#define STA_CSR4_TX_NO_RETRY_COUNT FIELD32(0x0000ffff) -#define STA_CSR4_TX_ONE_RETRY_COUNT FIELD32(0xffff0000) - -/* - * STA_CSR5: TX Retry count. - */ -#define STA_CSR5 0x30d4 -#define STA_CSR4_TX_MULTI_RETRY_COUNT FIELD32(0x0000ffff) -#define STA_CSR4_TX_RETRY_FAIL_COUNT FIELD32(0xffff0000) - -/* - * QOS control registers. - */ - -/* - * QOS_CSR1: TXOP holder MAC address register. - */ -#define QOS_CSR1 0x30e4 -#define QOS_CSR1_BYTE4 FIELD32(0x000000ff) -#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) - -/* - * QOS_CSR2: TXOP holder timeout register. - */ -#define QOS_CSR2 0x30e8 - -/* - * RX QOS-CFPOLL MAC address register. - * QOS_CSR3: RX QOS-CFPOLL MAC address 0. - * QOS_CSR4: RX QOS-CFPOLL MAC address 1. - */ -#define QOS_CSR3 0x30ec -#define QOS_CSR4 0x30f0 - -/* - * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. - */ -#define QOS_CSR5 0x30f4 - -/* - * WMM Scheduler Register - */ - -/* - * AIFSN_CSR: AIFSN for each EDCA AC. - * AIFSN0: For AC_VO. - * AIFSN1: For AC_VI. - * AIFSN2: For AC_BE. - * AIFSN3: For AC_BK. - */ -#define AIFSN_CSR 0x0400 -#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) -#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) -#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) -#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) - -/* - * CWMIN_CSR: CWmin for each EDCA AC. - * CWMIN0: For AC_VO. - * CWMIN1: For AC_VI. - * CWMIN2: For AC_BE. - * CWMIN3: For AC_BK. - */ -#define CWMIN_CSR 0x0404 -#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) -#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) -#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) -#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) - -/* - * CWMAX_CSR: CWmax for each EDCA AC. - * CWMAX0: For AC_VO. - * CWMAX1: For AC_VI. - * CWMAX2: For AC_BE. - * CWMAX3: For AC_BK. - */ -#define CWMAX_CSR 0x0408 -#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) -#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) -#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) -#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) - -/* - * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register. - * AC0_TX_OP: For AC_VO, in unit of 32us. - * AC1_TX_OP: For AC_VI, in unit of 32us. - */ -#define AC_TXOP_CSR0 0x040c -#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) - -/* - * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register. - * AC2_TX_OP: For AC_BE, in unit of 32us. - * AC3_TX_OP: For AC_BK, in unit of 32us. - */ -#define AC_TXOP_CSR1 0x0410 -#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2 - */ -#define BBP_R2_BG_MODE FIELD8(0x20) - -/* - * R3 - */ -#define BBP_R3_SMART_MODE FIELD8(0x01) - -/* - * R4: RX antenna control - * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) - */ - -/* - * ANTENNA_CONTROL semantics (guessed): - * 0x1: Software controlled antenna switching (fixed or SW diversity) - * 0x2: Hardware diversity. - */ -#define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03) -#define BBP_R4_RX_FRAME_END FIELD8(0x20) - -/* - * R77 - */ -#define BBP_R77_RX_ANTENNA FIELD8(0x03) - -/* - * RF registers - */ - -/* - * RF 3 - */ -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * RF 4 - */ -#define RF4_FREQ_OFFSET FIELD32(0x0003f000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antennas. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x0010 -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * EXTERNAL_LNA: External LNA. - */ -#define EEPROM_NIC 0x0011 -#define EEPROM_NIC_EXTERNAL_LNA FIELD16(0x0010) - -/* - * EEPROM geography. - * GEO_A: Default geographical setting for 5GHz band - * GEO: Default geographical setting. - */ -#define EEPROM_GEOGRAPHY 0x0012 -#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) -#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0013 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11G - */ -#define EEPROM_TXPOWER_G_START 0x0023 -#define EEPROM_TXPOWER_G_SIZE 7 -#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_G_2 FIELD16(0xff00) - -/* - * EEPROM Frequency - */ -#define EEPROM_FREQ 0x002f -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) -#define EEPROM_FREQ_SEQ FIELD16(0x0300) - -/* - * EEPROM LED. - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED 0x0030 -#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A_START 0x0031 -#define EEPROM_TXPOWER_A_SIZE 12 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11BG - */ -#define EEPROM_RSSI_OFFSET_BG 0x004d -#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11A - */ -#define EEPROM_RSSI_OFFSET_A 0x004e -#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 6 * sizeof(__le32) ) -#define TXINFO_SIZE ( 6 * sizeof(__le32) ) -#define RXD_DESC_SIZE ( 6 * sizeof(__le32) ) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - * BURST: Next frame belongs to same "burst" event. - * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. - * KEY_TABLE: Use per-client pairwise KEY table. - * KEY_INDEX: - * Key index (0~31) to the pairwise KEY table. - * 0~3 to shared KEY table 0 (BSS0). - * 4~7 to shared KEY table 1 (BSS1). - * 8~11 to shared KEY table 2 (BSS2). - * 12~15 to shared KEY table 3 (BSS3). - * BURST2: For backward compatibility, set to same value as BURST. - */ -#define TXD_W0_BURST FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_MORE_FRAG FIELD32(0x00000004) -#define TXD_W0_ACK FIELD32(0x00000008) -#define TXD_W0_TIMESTAMP FIELD32(0x00000010) -#define TXD_W0_OFDM FIELD32(0x00000020) -#define TXD_W0_IFS FIELD32(0x00000040) -#define TXD_W0_RETRY_MODE FIELD32(0x00000080) -#define TXD_W0_TKIP_MIC FIELD32(0x00000100) -#define TXD_W0_KEY_TABLE FIELD32(0x00000200) -#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_BURST2 FIELD32(0x10000000) -#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * HOST_Q_ID: EDCA/HCCA queue ID. - * HW_SEQUENCE: MAC overwrites the frame sequence number. - * BUFFER_COUNT: Number of buffers in this TXD. - */ -#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) -#define TXD_W1_AIFSN FIELD32(0x000000f0) -#define TXD_W1_CWMIN FIELD32(0x00000f00) -#define TXD_W1_CWMAX FIELD32(0x0000f000) -#define TXD_W1_IV_OFFSET FIELD32(0x003f0000) -#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) -#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) - -/* - * Word2: PLCP information - */ -#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word3 - */ -#define TXD_W3_IV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define TXD_W4_EIV FIELD32(0xffffffff) - -/* - * Word5 - * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). - * PACKET_ID: Driver assigned packet ID to categorize TXResult in interrupt. - * WAITING_DMA_DONE_INT: TXD been filled with data - * and waiting for TxDoneISR housekeeping. - */ -#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) -#define TXD_W5_PACKET_ID FIELD32(0x0000ff00) -#define TXD_W5_TX_POWER FIELD32(0x00ff0000) -#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. - * KEY_INDEX: Decryption key actually used. - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_DROP FIELD32(0x00000002) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) -#define RXD_W0_MULTICAST FIELD32(0x00000008) -#define RXD_W0_BROADCAST FIELD32(0x00000010) -#define RXD_W0_MY_BSS FIELD32(0x00000020) -#define RXD_W0_CRC_ERROR FIELD32(0x00000040) -#define RXD_W0_OFDM FIELD32(0x00000080) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) -#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * WORD1 - * SIGNAL: RX raw data rate reported by BBP. - * RSSI: RSSI reported by BBP. - */ -#define RXD_W1_SIGNAL FIELD32(0x000000ff) -#define RXD_W1_RSSI_AGC FIELD32(0x00001f00) -#define RXD_W1_RSSI_LNA FIELD32(0x00006000) -#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) - -/* - * Word2 - * IV: Received IV of originally encrypted. - */ -#define RXD_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - * EIV: Received EIV of originally encrypted. - */ -#define RXD_W3_EIV FIELD32(0xffffffff) - -/* - * Word4 - * ICV: Received ICV of originally encrypted. - * NOTE: This is a guess, the official definition is "reserved" - */ -#define RXD_W4_ICV FIELD32(0xffffffff) - -/* - * the above 20-byte is called RXINFO and will be DMAed to MAC RX block - * and passed to the HOST driver. - * The following fields are for DMA block and HOST usage only. - * Can't be touched by ASIC MAC block. - */ - -/* - * Word5 - */ -#define RXD_W5_RESERVED FIELD32(0xffffffff) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ - (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) - -#endif /* RT73USB_H */ |