MIPSsim: General cleanup

General cleanups mostly as suggested by checkpatch plus getting rid of
homebrew version of offsetof().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 44 insertions, 39 deletions

diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h
index 026c732024c9..0132c6714a40 100644
--- a/drivers/net/mipsnet.h
+++ b/drivers/net/mipsnet.h
@@ -9,32 +9,34 @@
 /*
  *  Id of this Net device, as seen by the core.
  */
-#define MIPS_NET_DEV_ID ((uint64_t)           \
-	                     ((uint64_t)'M'<< 0)| \
-	                     ((uint64_t)'I'<< 8)| \
-	                     ((uint64_t)'P'<<16)| \
-	                     ((uint64_t)'S'<<24)| \
-	                     ((uint64_t)'N'<<32)| \
-	                     ((uint64_t)'E'<<40)| \
-	                     ((uint64_t)'T'<<48)| \
-	                     ((uint64_t)'0'<<56))
+#define MIPS_NET_DEV_ID ((uint64_t)	   \
+			     ((uint64_t) 'M' <<  0)| \
+			     ((uint64_t) 'I' <<  8)| \
+			     ((uint64_t) 'P' << 16)| \
+			     ((uint64_t) 'S' << 24)| \
+			     ((uint64_t) 'N' << 32)| \
+			     ((uint64_t) 'E' << 40)| \
+			     ((uint64_t) 'T' << 48)| \
+			     ((uint64_t) '0' << 56))
 
 /*
  * Net status/control block as seen by sw in the core.
  * (Why not use bit fields? can't be bothered with cross-platform struct
  *  packing.)
  */
-typedef struct _net_control_block {
-	/// dev info for probing
-	///  reads as MIPSNET%d where %d is some form of version
-	uint64_t devId;		/*0x00 */
+struct net_control_block {
+	/*
+	 * dev info for probing
+	 * reads as MIPSNET%d where %d is some form of version
+	 */
+	uint64_t devId;		/* 0x00 */
 
 	/*
 	 * read only busy flag.
 	 * Set and cleared by the Net Device to indicate that an rx or a tx
 	 * is in progress.
 	 */
-	uint32_t busy;		/*0x08 */
+	uint32_t busy;		/* 0x08 */
 
 	/*
 	 * Set by the Net Device.
@@ -43,16 +45,16 @@ typedef struct _net_control_block {
 	 * rxDataBuffer.  The value will decrease till 0 until all the data
 	 * from rxDataBuffer has been read.
 	 */
-	uint32_t rxDataCount;	/*0x0c */
+	uint32_t rxDataCount;	/* 0x0c */
 #define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
 
 	/*
-	 * Settable from the MIPS core, cleared by the Net Device.
-	 * The core should set the number of bytes it wants to send,
-	 *   then it should write those bytes of data to txDataBuffer.
-	 * The device will clear txDataCount has been processed (not necessarily sent).
+	 * Settable from the MIPS core, cleared by the Net Device.  The core
+	 * should set the number of bytes it wants to send, then it should
+	 * write those bytes of data to txDataBuffer.  The device will clear
+	 * txDataCount has been processed (not necessarily sent).
 	 */
-	uint32_t txDataCount;	/*0x10 */
+	uint32_t txDataCount;	/* 0x10 */
 
 	/*
 	 * Interrupt control
@@ -69,39 +71,42 @@ typedef struct _net_control_block {
 	 *    To clear the test interrupt, write 0 to this register.
 	 */
 	uint32_t interruptControl;	/*0x14 */
-#define MIPSNET_INTCTL_TXDONE     ((uint32_t)(1<< 0))
-#define MIPSNET_INTCTL_RXDONE     ((uint32_t)(1<< 1))
-#define MIPSNET_INTCTL_TESTBIT    ((uint32_t)(1<<31))
-#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT)
+#define MIPSNET_INTCTL_TXDONE     ((uint32_t)(1 <<  0))
+#define MIPSNET_INTCTL_RXDONE     ((uint32_t)(1 <<  1))
+#define MIPSNET_INTCTL_TESTBIT    ((uint32_t)(1 << 31))
+#define MIPSNET_INTCTL_ALLSOURCES	(MIPSNET_INTCTL_TXDONE | \
+					 MIPSNET_INTCTL_RXDONE | \
+					 MIPSNET_INTCTL_TESTBIT)
 
 	/*
-	 * Readonly core-specific interrupt info for the device to signal the core.
-	 * The meaning of the contents of this field might change.
-	 */
-	/*###\todo: the whole memIntf interrupt scheme is messy: the device should have
-	 *  no control what so ever of what VPE/register set is being used.
-	 *  The MemIntf should only expose interrupt lines, and something in the
-	 *  config should be responsible for the line<->core/vpe bindings.
+	 * Readonly core-specific interrupt info for the device to signal the
+	 * core.  The meaning of the contents of this field might change.
+	 *
+	 * TODO: the whole memIntf interrupt scheme is messy: the device should
+	 *       have no control what so ever of what VPE/register set is being
+	 *       used.  The MemIntf should only expose interrupt lines, and
+	 *       something in the config should be responsible for the
+	 *       line<->core/vpe bindings.
 	 */
-	uint32_t interruptInfo;	/*0x18 */
+	uint32_t interruptInfo;	/* 0x18 */
 
 	/*
 	 *  This is where the received data is read out.
 	 *  There is more data to read until rxDataReady is 0.
 	 *  Only 1 byte at this regs offset is used.
 	 */
-	uint32_t rxDataBuffer;	/*0x1c */
+	uint32_t rxDataBuffer;	/* 0x1c */
 
 	/*
-	 * This is where the data to transmit is written.
-	 * Data should be written for the amount specified in the txDataCount register.
-	 *  Only 1 byte at this regs offset is used.
+	 * This is where the data to transmit is written.  Data should be
+	 * written for the amount specified in the txDataCount register.  Only
+	 * 1 byte at this regs offset is used.
 	 */
-	uint32_t txDataBuffer;	/*0x20 */
-} MIPS_T_NetControl;
+	uint32_t txDataBuffer;	/* 0x20 */
+};
 
 #define MIPSNET_IO_EXTENT 0x40	/* being generous */
 
-#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field)
+#define field_offset(field) (offsetof(struct net_control_block, field))
 
 #endif /* __MIPSNET_H */