[netdrvr] Use dev_printk() when ethernet interface isn't available

For messages prior to register_netdev(), prefer dev_printk() because
that prints out both our driver name and our [PCI | whatever] bus id.

Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx,
	 hamachi, ne2k-pci, ns83820, pci-skeleton, r8169.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index d33130f64700..428e2067738c 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -4887,13 +4887,13 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device, "
+		dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, "
 		       "aborting.\n");
 		return err;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		printk(KERN_ERR PFX "Cannot find proper PCI device "
+		dev_printk(KERN_ERR, &pdev->dev, "Cannot find proper PCI device "
 		       "base address, aborting.\n");
 		err = -ENODEV;
 		goto err_out_disable_pdev;
@@ -4901,7 +4901,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 
 	dev = alloc_etherdev(sizeof(*cp));
 	if (!dev) {
-		printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
+		dev_printk(KERN_ERR, &pdev->dev, "Etherdev alloc failed, aborting.\n");
 		err = -ENOMEM;
 		goto err_out_disable_pdev;
 	}
@@ -4910,7 +4910,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 
 	err = pci_request_regions(pdev, dev->name);
 	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources, "
+		dev_printk(KERN_ERR, &pdev->dev, "Cannot obtain PCI resources, "
 		       "aborting.\n");
 		goto err_out_free_netdev;
 	}
@@ -4941,7 +4941,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		if (pci_write_config_byte(pdev, 
 					  PCI_CACHE_LINE_SIZE, 
 					  cas_cacheline_size)) {
-			printk(KERN_ERR PFX "Could not set PCI cache "
+			dev_printk(KERN_ERR, &pdev->dev, "Could not set PCI cache "
 			       "line size\n");
 			goto err_write_cacheline;
 		}
@@ -4955,7 +4955,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		err = pci_set_consistent_dma_mask(pdev,
 						  DMA_64BIT_MASK);
 		if (err < 0) {
-			printk(KERN_ERR PFX "Unable to obtain 64-bit DMA "
+			dev_printk(KERN_ERR, &pdev->dev, "Unable to obtain 64-bit DMA "
 			       "for consistent allocations\n");
 			goto err_out_free_res;
 		}
@@ -4963,7 +4963,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	} else {
 		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (err) {
-			printk(KERN_ERR PFX "No usable DMA configuration, "
+			dev_printk(KERN_ERR, &pdev->dev, "No usable DMA configuration, "
 			       "aborting.\n");
 			goto err_out_free_res;
 		}
@@ -5023,7 +5023,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	/* give us access to cassini registers */
 	cp->regs = pci_iomap(pdev, 0, casreg_len);
 	if (cp->regs == 0UL) {
-		printk(KERN_ERR PFX "Cannot map device registers, "
+		dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, "
 		       "aborting.\n");
 		goto err_out_free_res;
 	}
@@ -5040,7 +5040,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		pci_alloc_consistent(pdev, sizeof(struct cas_init_block),
 				     &cp->block_dvma);
 	if (!cp->init_block) {
-		printk(KERN_ERR PFX "Cannot allocate init block, "
+		dev_printk(KERN_ERR, &pdev->dev, "Cannot allocate init block, "
 		       "aborting.\n");
 		goto err_out_iounmap;
 	}
@@ -5085,7 +5085,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		dev->features |= NETIF_F_HIGHDMA;
 
 	if (register_netdev(dev)) {
-		printk(KERN_ERR PFX "Cannot register net device, "
+		dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, "
 		       "aborting.\n");
 		goto err_out_free_consistent;
 	}