i825xx: Move the Intel 82586/82593/82596 based drivers

Move the drivers that use the i82586/i82593/i82596 chipsets into
drivers/net/ethernet/i825xx/ and make the necessary Kconfig and
Makefile changes.  There were 4 3Com drivers which were initially
moved into 3com/, which now reside in i825xx since they all used
the i82586 chip.

CC: Philip Blundell <philb@gnu.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: <aris@cathedrallabs.org>
CC: Donald Becker <becker@scyld.com>
CC: Chris Beauregard <cpbeaure@undergrad.math.uwaterloo.ca>
CC: Richard Procter <rnp@paradise.net.nz>
CC: Andries Brouwer <aeb@cwi.nl>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Richard Hirst <richard@sleepie.demon.co.uk>
CC: Sam Creasey <sammy@oh.verio.com>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 292 deletions

diff --git a/drivers/net/3c505.h b/drivers/net/3c505.h
deleted file mode 100644
index 04df2a9002b6..000000000000
--- a/drivers/net/3c505.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*****************************************************************
- *
- *  defines for 3Com Etherlink Plus adapter
- *
- *****************************************************************/
-
-#define ELP_DMA       6
-#define ELP_RX_PCBS   4
-#define ELP_MAX_CARDS 4
-
-/*
- * I/O register offsets
- */
-#define	PORT_COMMAND	0x00	/* read/write, 8-bit */
-#define	PORT_STATUS	0x02	/* read only, 8-bit */
-#define	PORT_AUXDMA	0x02	/* write only, 8-bit */
-#define	PORT_DATA	0x04	/* read/write, 16-bit */
-#define	PORT_CONTROL	0x06	/* read/write, 8-bit */
-
-#define ELP_IO_EXTENT	0x10	/* size of used IO registers */
-
-/*
- * host control registers bits
- */
-#define	ATTN	0x80	/* attention */
-#define	FLSH	0x40	/* flush data register */
-#define DMAE	0x20	/* DMA enable */
-#define DIR	0x10	/* direction */
-#define	TCEN	0x08	/* terminal count interrupt enable */
-#define	CMDE	0x04	/* command register interrupt enable */
-#define	HSF2	0x02	/* host status flag 2 */
-#define	HSF1	0x01	/* host status flag 1 */
-
-/*
- * combinations of HSF flags used for PCB transmission
- */
-#define	HSF_PCB_ACK	HSF1
-#define	HSF_PCB_NAK	HSF2
-#define	HSF_PCB_END	(HSF2|HSF1)
-#define	HSF_PCB_MASK	(HSF2|HSF1)
-
-/*
- * host status register bits
- */
-#define	HRDY	0x80	/* data register ready */
-#define	HCRE	0x40	/* command register empty */
-#define	ACRF	0x20	/* adapter command register full */
-/* #define DIR 	0x10	direction - same as in control register */
-#define	DONE	0x08	/* DMA done */
-#define	ASF3	0x04	/* adapter status flag 3 */
-#define	ASF2	0x02	/* adapter status flag 2 */
-#define	ASF1	0x01	/* adapter status flag 1 */
-
-/*
- * combinations of ASF flags used for PCB reception
- */
-#define	ASF_PCB_ACK	ASF1
-#define	ASF_PCB_NAK	ASF2
-#define	ASF_PCB_END	(ASF2|ASF1)
-#define	ASF_PCB_MASK	(ASF2|ASF1)
-
-/*
- * host aux DMA register bits
- */
-#define	DMA_BRST	0x01	/* DMA burst */
-
-/*
- * maximum amount of data allowed in a PCB
- */
-#define	MAX_PCB_DATA	62
-
-/*****************************************************************
- *
- *  timeout value
- *	this is a rough value used for loops to stop them from
- *	locking up the whole machine in the case of failure or
- *	error conditions
- *
- *****************************************************************/
-
-#define	TIMEOUT	300
-
-/*****************************************************************
- *
- * PCB commands
- *
- *****************************************************************/
-
-enum {
-  /*
-   * host PCB commands
-   */
-  CMD_CONFIGURE_ADAPTER_MEMORY	= 0x01,
-  CMD_CONFIGURE_82586		= 0x02,
-  CMD_STATION_ADDRESS		= 0x03,
-  CMD_DMA_DOWNLOAD		= 0x04,
-  CMD_DMA_UPLOAD		= 0x05,
-  CMD_PIO_DOWNLOAD		= 0x06,
-  CMD_PIO_UPLOAD		= 0x07,
-  CMD_RECEIVE_PACKET		= 0x08,
-  CMD_TRANSMIT_PACKET		= 0x09,
-  CMD_NETWORK_STATISTICS	= 0x0a,
-  CMD_LOAD_MULTICAST_LIST	= 0x0b,
-  CMD_CLEAR_PROGRAM		= 0x0c,
-  CMD_DOWNLOAD_PROGRAM		= 0x0d,
-  CMD_EXECUTE_PROGRAM		= 0x0e,
-  CMD_SELF_TEST			= 0x0f,
-  CMD_SET_STATION_ADDRESS	= 0x10,
-  CMD_ADAPTER_INFO		= 0x11,
-  NUM_TRANSMIT_CMDS,
-
-  /*
-   * adapter PCB commands
-   */
-  CMD_CONFIGURE_ADAPTER_RESPONSE	= 0x31,
-  CMD_CONFIGURE_82586_RESPONSE		= 0x32,
-  CMD_ADDRESS_RESPONSE			= 0x33,
-  CMD_DOWNLOAD_DATA_REQUEST		= 0x34,
-  CMD_UPLOAD_DATA_REQUEST		= 0x35,
-  CMD_RECEIVE_PACKET_COMPLETE		= 0x38,
-  CMD_TRANSMIT_PACKET_COMPLETE		= 0x39,
-  CMD_NETWORK_STATISTICS_RESPONSE	= 0x3a,
-  CMD_LOAD_MULTICAST_RESPONSE		= 0x3b,
-  CMD_CLEAR_PROGRAM_RESPONSE		= 0x3c,
-  CMD_DOWNLOAD_PROGRAM_RESPONSE		= 0x3d,
-  CMD_EXECUTE_RESPONSE			= 0x3e,
-  CMD_SELF_TEST_RESPONSE		= 0x3f,
-  CMD_SET_ADDRESS_RESPONSE		= 0x40,
-  CMD_ADAPTER_INFO_RESPONSE		= 0x41
-};
-
-/* Definitions for the PCB data structure */
-
-/* Data units */
-typedef unsigned char         byte;
-typedef unsigned short int    word;
-typedef unsigned long int     dword;
-
-/* Data structures */
-struct Memconf {
-	word	cmd_q,
-		rcv_q,
-		mcast,
-		frame,
-		rcv_b,
-		progs;
-};
-
-struct Rcv_pkt {
-	word	buf_ofs,
-		buf_seg,
-		buf_len,
-		timeout;
-};
-
-struct Xmit_pkt {
-	word	buf_ofs,
-		buf_seg,
-		pkt_len;
-};
-
-struct Rcv_resp {
-	word	buf_ofs,
-		buf_seg,
-		buf_len,
-		pkt_len,
-		timeout,
-		status;
-	dword	timetag;
-};
-
-struct Xmit_resp {
-	word	buf_ofs,
-		buf_seg,
-		c_stat,
-		status;
-};
-
-
-struct Netstat {
-	dword	tot_recv,
-		tot_xmit;
-	word	err_CRC,
-		err_align,
-		err_res,
-		err_ovrrun;
-};
-
-
-struct Selftest {
-	word	error;
-	union {
-		word ROM_cksum;
-		struct {
-			word ofs, seg;
-		} RAM;
-		word i82586;
-	} failure;
-};
-
-struct Info {
-	byte	minor_vers,
-		major_vers;
-	word	ROM_cksum,
-		RAM_sz,
-		free_ofs,
-		free_seg;
-};
-
-struct Memdump {
-       word size,
-            off,
-            seg;
-};
-
-/*
-Primary Command Block. The most important data structure. All communication
-between the host and the adapter is done with these. (Except for the actual
-Ethernet data, which has different packaging.)
-*/
-typedef struct {
-	byte	command;
-	byte	length;
-	union	{
-		struct Memconf		memconf;
-		word			configure;
-		struct Rcv_pkt		rcv_pkt;
-		struct Xmit_pkt		xmit_pkt;
-		byte			multicast[10][6];
-		byte			eth_addr[6];
-		byte			failed;
-		struct Rcv_resp		rcv_resp;
-		struct Xmit_resp	xmit_resp;
-		struct Netstat		netstat;
-		struct Selftest		selftest;
-		struct Info		info;
-		struct Memdump    	memdump;
-		byte			raw[62];
-	} data;
-} pcb_struct;
-
-/* These defines for 'configure' */
-#define RECV_STATION	0x00
-#define RECV_BROAD	0x01
-#define RECV_MULTI	0x02
-#define RECV_PROMISC	0x04
-#define NO_LOOPBACK	0x00
-#define INT_LOOPBACK	0x08
-#define EXT_LOOPBACK	0x10
-
-/*****************************************************************
- *
- *  structure to hold context information for adapter
- *
- *****************************************************************/
-
-#define DMA_BUFFER_SIZE  1600
-#define BACKLOG_SIZE      4
-
-typedef struct {
-	volatile short got[NUM_TRANSMIT_CMDS];	/* flags for
-						   command completion */
-	pcb_struct tx_pcb;	/* PCB for foreground sending */
-	pcb_struct rx_pcb;	/* PCB for foreground receiving */
-	pcb_struct itx_pcb;	/* PCB for background sending */
-	pcb_struct irx_pcb;	/* PCB for background receiving */
-
-	void *dma_buffer;
-
-	struct {
-		unsigned int length[BACKLOG_SIZE];
-		unsigned int in;
-		unsigned int out;
-	} rx_backlog;
-
-	struct {
-		unsigned int direction;
-		unsigned int length;
-		struct sk_buff *skb;
-	        void *target;
-		unsigned long start_time;
-	} current_dma;
-
-	/* flags */
-	unsigned long send_pcb_semaphore;
-	unsigned long dmaing;
-	unsigned long busy;
-
-	unsigned int rx_active;  /* number of receive PCBs */
-        volatile unsigned char hcr_val;  /* what we think the HCR contains */
-        spinlock_t lock;	/* Interrupt v tx lock */
-} elp_device;