Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd

Pull MTD updates from Richard Weinberger:
 "General changes:
   -  Unconfuse get_unmapped_area and point/unpoint driver methods
   -  New partition parser: sharpslpart
   -  Kill GENERIC_IO
   -  Various fixes

  NAND changes:
   -  Add a flag to mark NANDs that require 3 address cycles to encode a
      page address
   -  Set a default ECC/free layout when NAND_ECC_NONE is requested
   -  Fix a bug in panic_nand_write()
   -  Another batch of cleanups for the denali driver
   -  Fix PM support in the atmel driver
   -  Remove support for platform data in the omap driver
   -  Fix subpage write in the omap driver
   -  Fix irq handling in the mtk driver
   -  Change link order of mtk_ecc and mtk_nand drivers to speed up boot
      time
   -  Change log level of ECC error messages in the mxc driver
   -  Patch the pxa3xx driver to support Armada 8k platforms
   -  Add BAM DMA support to the qcom driver
   -  Convert gpio-nand to the GPIO desc API
   -  Fix ECC handling in the mt29f driver

  SPI-NOR changes:
   -  Introduce system power management support
   -  New mechanism to select the proper .quad_enable() hook by JEDEC
      ID, when needed, instead of only by manufacturer ID
   -  Add support to new memory parts from Gigadevice, Winbond, Macronix
      and Everspin
   -  Maintainance for Cadence, Intel, Mediatek and STM32 drivers"

*  tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits)
  mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid
  mtd: sharpslpart: Add sharpslpart partition parser
  mtd: Add sanity checks in mtd_write/read_oob()
  mtd: remove the get_unmapped_area method
  mtd: implement mtd_get_unmapped_area() using the point method
  mtd: chips/map_rom.c: implement point and unpoint methods
  mtd: chips/map_ram.c: implement point and unpoint methods
  mtd: mtdram: properly handle the phys argument in the point method
  mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD'
  mtd: slram: use memremap() instead of ioremap()
  kconfig: kill off GENERIC_IO option
  mtd: Fix C++ comment in include/linux/mtd/mtd.h
  mtd: constify mtd_partition
  mtd: plat-ram: Replace manual resource management by devm
  mtd: nand: Fix writing mtdoops to nand flash.
  mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID
  mtd: nand: mtk: fix infinite ECC decode IRQ issue
  mtd: spi-nor: Add support for mr25h128
  mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o
  mtd: spi-nor: enable 4B opcodes for mx66l51235l
  ...

1 files changed, 232 insertions, 145 deletions

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 54540c8fa1a2..dad438c4906a 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1133,129 +1133,172 @@ static u8  bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
 				0x97, 0x79, 0xe5, 0x24, 0xb5};
 
 /**
- * omap_calculate_ecc_bch - Generate bytes of ECC bytes
+ * _omap_calculate_ecc_bch - Generate ECC bytes for one sector
  * @mtd:	MTD device structure
  * @dat:	The pointer to data on which ecc is computed
  * @ecc_code:	The ecc_code buffer
+ * @i:		The sector number (for a multi sector page)
  *
- * Support calculating of BCH4/8 ecc vectors for the page
+ * Support calculating of BCH4/8/16 ECC vectors for one sector
+ * within a page. Sector number is in @i.
  */
-static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
-					const u_char *dat, u_char *ecc_calc)
+static int _omap_calculate_ecc_bch(struct mtd_info *mtd,
+				   const u_char *dat, u_char *ecc_calc, int i)
 {
 	struct omap_nand_info *info = mtd_to_omap(mtd);
 	int eccbytes	= info->nand.ecc.bytes;
 	struct gpmc_nand_regs	*gpmc_regs = &info->reg;
 	u8 *ecc_code;
-	unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
+	unsigned long bch_val1, bch_val2, bch_val3, bch_val4;
 	u32 val;
-	int i, j;
+	int j;
+
+	ecc_code = ecc_calc;
+	switch (info->ecc_opt) {
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+	case OMAP_ECC_BCH8_CODE_HW:
+		bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+		bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+		bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
+		bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
+		*ecc_code++ = (bch_val4 & 0xFF);
+		*ecc_code++ = ((bch_val3 >> 24) & 0xFF);
+		*ecc_code++ = ((bch_val3 >> 16) & 0xFF);
+		*ecc_code++ = ((bch_val3 >> 8) & 0xFF);
+		*ecc_code++ = (bch_val3 & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 24) & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 16) & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 8) & 0xFF);
+		*ecc_code++ = (bch_val2 & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 24) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 16) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 8) & 0xFF);
+		*ecc_code++ = (bch_val1 & 0xFF);
+		break;
+	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+	case OMAP_ECC_BCH4_CODE_HW:
+		bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+		bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+		*ecc_code++ = ((bch_val2 >> 12) & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 4) & 0xFF);
+		*ecc_code++ = ((bch_val2 & 0xF) << 4) |
+			((bch_val1 >> 28) & 0xF);
+		*ecc_code++ = ((bch_val1 >> 20) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 12) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
+		*ecc_code++ = ((bch_val1 & 0xF) << 4);
+		break;
+	case OMAP_ECC_BCH16_CODE_HW:
+		val = readl(gpmc_regs->gpmc_bch_result6[i]);
+		ecc_code[0]  = ((val >>  8) & 0xFF);
+		ecc_code[1]  = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result5[i]);
+		ecc_code[2]  = ((val >> 24) & 0xFF);
+		ecc_code[3]  = ((val >> 16) & 0xFF);
+		ecc_code[4]  = ((val >>  8) & 0xFF);
+		ecc_code[5]  = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result4[i]);
+		ecc_code[6]  = ((val >> 24) & 0xFF);
+		ecc_code[7]  = ((val >> 16) & 0xFF);
+		ecc_code[8]  = ((val >>  8) & 0xFF);
+		ecc_code[9]  = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result3[i]);
+		ecc_code[10] = ((val >> 24) & 0xFF);
+		ecc_code[11] = ((val >> 16) & 0xFF);
+		ecc_code[12] = ((val >>  8) & 0xFF);
+		ecc_code[13] = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result2[i]);
+		ecc_code[14] = ((val >> 24) & 0xFF);
+		ecc_code[15] = ((val >> 16) & 0xFF);
+		ecc_code[16] = ((val >>  8) & 0xFF);
+		ecc_code[17] = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result1[i]);
+		ecc_code[18] = ((val >> 24) & 0xFF);
+		ecc_code[19] = ((val >> 16) & 0xFF);
+		ecc_code[20] = ((val >>  8) & 0xFF);
+		ecc_code[21] = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result0[i]);
+		ecc_code[22] = ((val >> 24) & 0xFF);
+		ecc_code[23] = ((val >> 16) & 0xFF);
+		ecc_code[24] = ((val >>  8) & 0xFF);
+		ecc_code[25] = ((val >>  0) & 0xFF);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* ECC scheme specific syndrome customizations */
+	switch (info->ecc_opt) {
+	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+		/* Add constant polynomial to remainder, so that
+		 * ECC of blank pages results in 0x0 on reading back
+		 */
+		for (j = 0; j < eccbytes; j++)
+			ecc_calc[j] ^= bch4_polynomial[j];
+		break;
+	case OMAP_ECC_BCH4_CODE_HW:
+		/* Set  8th ECC byte as 0x0 for ROM compatibility */
+		ecc_calc[eccbytes - 1] = 0x0;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+		/* Add constant polynomial to remainder, so that
+		 * ECC of blank pages results in 0x0 on reading back
+		 */
+		for (j = 0; j < eccbytes; j++)
+			ecc_calc[j] ^= bch8_polynomial[j];
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		/* Set 14th ECC byte as 0x0 for ROM compatibility */
+		ecc_calc[eccbytes - 1] = 0x0;
+		break;
+	case OMAP_ECC_BCH16_CODE_HW:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used
+ * when SW based correction is required as ECC is required for one sector
+ * at a time.
+ */
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd,
+				     const u_char *dat, u_char *ecc_calc)
+{
+	return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0);
+}
+
+/**
+ * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go.
+ */
+static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd,
+					const u_char *dat, u_char *ecc_calc)
+{
+	struct omap_nand_info *info = mtd_to_omap(mtd);
+	int eccbytes = info->nand.ecc.bytes;
+	unsigned long nsectors;
+	int i, ret;
 
 	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
 	for (i = 0; i < nsectors; i++) {
-		ecc_code = ecc_calc;
-		switch (info->ecc_opt) {
-		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
-		case OMAP_ECC_BCH8_CODE_HW:
-			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
-			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
-			bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
-			bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
-			*ecc_code++ = (bch_val4 & 0xFF);
-			*ecc_code++ = ((bch_val3 >> 24) & 0xFF);
-			*ecc_code++ = ((bch_val3 >> 16) & 0xFF);
-			*ecc_code++ = ((bch_val3 >> 8) & 0xFF);
-			*ecc_code++ = (bch_val3 & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 24) & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 16) & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 8) & 0xFF);
-			*ecc_code++ = (bch_val2 & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 24) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 16) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 8) & 0xFF);
-			*ecc_code++ = (bch_val1 & 0xFF);
-			break;
-		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
-		case OMAP_ECC_BCH4_CODE_HW:
-			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
-			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
-			*ecc_code++ = ((bch_val2 >> 12) & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 4) & 0xFF);
-			*ecc_code++ = ((bch_val2 & 0xF) << 4) |
-				((bch_val1 >> 28) & 0xF);
-			*ecc_code++ = ((bch_val1 >> 20) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 12) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
-			*ecc_code++ = ((bch_val1 & 0xF) << 4);
-			break;
-		case OMAP_ECC_BCH16_CODE_HW:
-			val = readl(gpmc_regs->gpmc_bch_result6[i]);
-			ecc_code[0]  = ((val >>  8) & 0xFF);
-			ecc_code[1]  = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result5[i]);
-			ecc_code[2]  = ((val >> 24) & 0xFF);
-			ecc_code[3]  = ((val >> 16) & 0xFF);
-			ecc_code[4]  = ((val >>  8) & 0xFF);
-			ecc_code[5]  = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result4[i]);
-			ecc_code[6]  = ((val >> 24) & 0xFF);
-			ecc_code[7]  = ((val >> 16) & 0xFF);
-			ecc_code[8]  = ((val >>  8) & 0xFF);
-			ecc_code[9]  = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result3[i]);
-			ecc_code[10] = ((val >> 24) & 0xFF);
-			ecc_code[11] = ((val >> 16) & 0xFF);
-			ecc_code[12] = ((val >>  8) & 0xFF);
-			ecc_code[13] = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result2[i]);
-			ecc_code[14] = ((val >> 24) & 0xFF);
-			ecc_code[15] = ((val >> 16) & 0xFF);
-			ecc_code[16] = ((val >>  8) & 0xFF);
-			ecc_code[17] = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result1[i]);
-			ecc_code[18] = ((val >> 24) & 0xFF);
-			ecc_code[19] = ((val >> 16) & 0xFF);
-			ecc_code[20] = ((val >>  8) & 0xFF);
-			ecc_code[21] = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result0[i]);
-			ecc_code[22] = ((val >> 24) & 0xFF);
-			ecc_code[23] = ((val >> 16) & 0xFF);
-			ecc_code[24] = ((val >>  8) & 0xFF);
-			ecc_code[25] = ((val >>  0) & 0xFF);
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		/* ECC scheme specific syndrome customizations */
-		switch (info->ecc_opt) {
-		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
-			/* Add constant polynomial to remainder, so that
-			 * ECC of blank pages results in 0x0 on reading back */
-			for (j = 0; j < eccbytes; j++)
-				ecc_calc[j] ^= bch4_polynomial[j];
-			break;
-		case OMAP_ECC_BCH4_CODE_HW:
-			/* Set  8th ECC byte as 0x0 for ROM compatibility */
-			ecc_calc[eccbytes - 1] = 0x0;
-			break;
-		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
-			/* Add constant polynomial to remainder, so that
-			 * ECC of blank pages results in 0x0 on reading back */
-			for (j = 0; j < eccbytes; j++)
-				ecc_calc[j] ^= bch8_polynomial[j];
-			break;
-		case OMAP_ECC_BCH8_CODE_HW:
-			/* Set 14th ECC byte as 0x0 for ROM compatibility */
-			ecc_calc[eccbytes - 1] = 0x0;
-			break;
-		case OMAP_ECC_BCH16_CODE_HW:
-			break;
-		default:
-			return -EINVAL;
-		}
+		ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i);
+		if (ret)
+			return ret;
 
-	ecc_calc += eccbytes;
+		ecc_calc += eccbytes;
 	}
 
 	return 0;
@@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->write_buf(mtd, buf, mtd->writesize);
 
 	/* Update ecc vector from GPMC result registers */
-	chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+	omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]);
 
 	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
 					 chip->ecc.total);
@@ -1509,6 +1552,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /**
+ * omap_write_subpage_bch - BCH hardware ECC based subpage write
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @offset:	column address of subpage within the page
+ * @data_len:	data length
+ * @buf:	data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ *
+ * OMAP optimized subpage write method.
+ */
+static int omap_write_subpage_bch(struct mtd_info *mtd,
+				  struct nand_chip *chip, u32 offset,
+				  u32 data_len, const u8 *buf,
+				  int oob_required, int page)
+{
+	u8 *ecc_calc = chip->buffers->ecccalc;
+	int ecc_size      = chip->ecc.size;
+	int ecc_bytes     = chip->ecc.bytes;
+	int ecc_steps     = chip->ecc.steps;
+	u32 start_step = offset / ecc_size;
+	u32 end_step   = (offset + data_len - 1) / ecc_size;
+	int step, ret = 0;
+
+	/*
+	 * Write entire page at one go as it would be optimal
+	 * as ECC is calculated by hardware.
+	 * ECC is calculated for all subpages but we choose
+	 * only what we want.
+	 */
+
+	/* Enable GPMC ECC engine */
+	chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+	/* Write data */
+	chip->write_buf(mtd, buf, mtd->writesize);
+
+	for (step = 0; step < ecc_steps; step++) {
+		/* mask ECC of un-touched subpages by padding 0xFF */
+		if (step < start_step || step > end_step)
+			memset(ecc_calc, 0xff, ecc_bytes);
+		else
+			ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step);
+
+		if (ret)
+			return ret;
+
+		buf += ecc_size;
+		ecc_calc += ecc_bytes;
+	}
+
+	/* copy calculated ECC for whole page to chip->buffer->oob */
+	/* this include masked-value(0xFF) for unwritten subpages */
+	ecc_calc = chip->buffers->ecccalc;
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
+
+	/* write OOB buffer to NAND device */
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+/**
  * omap_read_page_bch - BCH ecc based page read function for entire page
  * @mtd:		mtd info structure
  * @chip:		nand chip info structure
@@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 		       chip->ecc.total);
 
 	/* Calculate ecc bytes */
-	chip->ecc.calculate(mtd, buf, ecc_calc);
+	omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc);
 
 	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
 					 chip->ecc.total);
@@ -1588,8 +1697,7 @@ static bool is_elm_present(struct omap_nand_info *info,
 	return true;
 }
 
-static bool omap2_nand_ecc_check(struct omap_nand_info *info,
-				 struct omap_nand_platform_data	*pdata)
+static bool omap2_nand_ecc_check(struct omap_nand_info *info)
 {
 	bool ecc_needs_bch, ecc_needs_omap_bch, ecc_needs_elm;
 
@@ -1804,7 +1912,6 @@ static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = {
 static int omap_nand_probe(struct platform_device *pdev)
 {
 	struct omap_nand_info		*info;
-	struct omap_nand_platform_data	*pdata = NULL;
 	struct mtd_info			*mtd;
 	struct nand_chip		*nand_chip;
 	int				err;
@@ -1821,29 +1928,10 @@ static int omap_nand_probe(struct platform_device *pdev)
 
 	info->pdev = pdev;
 
-	if (dev->of_node) {
-		if (omap_get_dt_info(dev, info))
-			return -EINVAL;
-	} else {
-		pdata = dev_get_platdata(&pdev->dev);
-		if (!pdata) {
-			dev_err(&pdev->dev, "platform data missing\n");
-			return -EINVAL;
-		}
-
-		info->gpmc_cs = pdata->cs;
-		info->reg = pdata->reg;
-		info->ecc_opt = pdata->ecc_opt;
-		if (pdata->dev_ready)
-			dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n");
-
-		info->xfer_type = pdata->xfer_type;
-		info->devsize = pdata->devsize;
-		info->elm_of_node = pdata->elm_of_node;
-		info->flash_bbt = pdata->flash_bbt;
-	}
+	err = omap_get_dt_info(dev, info);
+	if (err)
+		return err;
 
-	platform_set_drvdata(pdev, info);
 	info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
 	if (!info->ops) {
 		dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
@@ -2002,7 +2090,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		goto return_error;
 	}
 
-	if (!omap2_nand_ecc_check(info, pdata)) {
+	if (!omap2_nand_ecc_check(info)) {
 		err = -EINVAL;
 		goto return_error;
 	}
@@ -2044,7 +2132,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 4;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
 		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
@@ -2066,9 +2154,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 4;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;
 
@@ -2087,7 +2175,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 8;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
 		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
@@ -2109,9 +2197,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 8;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;
 
@@ -2131,9 +2219,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 16;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;
 
@@ -2167,10 +2255,9 @@ scan_tail:
 	if (err)
 		goto return_error;
 
-	if (dev->of_node)
-		mtd_device_register(mtd, NULL, 0);
-	else
-		mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+	err = mtd_device_register(mtd, NULL, 0);
+	if (err)
+		goto return_error;
 
 	platform_set_drvdata(pdev, mtd);