Merge tag 'nand/for-4.7' of github.com:linux-nand/linux

Updates from Boris Brezillon:

This pull request contains the following infrastructure changes:
* introduction of the ECC algo concept to extend the ECC mode one
* replacement of the nand_ecclayout infrastructure by something more
  future-proof.
* addition of an mtd-activity led trigger to replace the nand-activity
  one

And a bunch of specific NAND driver improvements/fixes. Here are the
changes that are worth mentioning:
* rework of the OMAP GPMC and NAND drivers
* prepare the sunxi NAND driver to receive DMA support
* handle bitflips in erased pages on GPMI revisions that do not support
  this in hardware.

* tag 'nand/for-4.7' of github.com:linux-nand/linux: (152 commits)
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  mtd: nand: sh_flctl: rely on generic DT parsing done in nand_scan_ident()
  mtd: nand: mxc: rely on generic DT parsing done in nand_scan_ident()
  ...

1 files changed, 35 insertions, 11 deletions

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index e7b2e439696c..b833e6cc684c 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -67,16 +67,40 @@ module_param(reliable_mode, uint, 0);
 MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
 		 "2=reliable) : MLC normal operations are in normal mode");
 
-/**
- * struct docg3_oobinfo - DiskOnChip G3 OOB layout
- * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
- * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
- * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
- */
-static struct nand_ecclayout docg3_oobinfo = {
-	.eccbytes = 8,
-	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
-	.oobfree = {{0, 7}, {15, 1} },
+static int docg3_ooblayout_ecc(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	/* byte 7 is Hamming ECC, byte 8-14 are BCH ECC */
+	oobregion->offset = 7;
+	oobregion->length = 8;
+
+	return 0;
+}
+
+static int docg3_ooblayout_free(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	/* free bytes: byte 0 until byte 6, byte 15 */
+	if (!section) {
+		oobregion->offset = 0;
+		oobregion->length = 7;
+	} else {
+		oobregion->offset = 15;
+		oobregion->length = 1;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_docg3_ops = {
+	.ecc = docg3_ooblayout_ecc,
+	.free = docg3_ooblayout_free,
 };
 
 static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
@@ -1857,7 +1881,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 	mtd->_read_oob = doc_read_oob;
 	mtd->_write_oob = doc_write_oob;
 	mtd->_block_isbad = doc_block_isbad;
-	mtd->ecclayout = &docg3_oobinfo;
+	mtd_set_ooblayout(mtd, &nand_ooblayout_docg3_ops);
 	mtd->oobavail = 8;
 	mtd->ecc_strength = DOC_ECC_BCH_T;