Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

2 files changed, 27 insertions, 11 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index afe8c6fa166a..54f91321749a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -225,7 +225,7 @@ config MMC_OMAP
 
 config MMC_OMAP_HS
 	tristate "TI OMAP High Speed Multimedia Card Interface support"
-	depends on ARCH_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4
+	depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4
 	help
 	  This selects the TI OMAP High Speed Multimedia card Interface.
 	  If you have an OMAP2430 or OMAP3 board or OMAP4 board with a
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 078fdf11af03..158c0ee53b2c 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -118,7 +118,7 @@
 
 #define MMC_TIMEOUT_MS		20
 #define OMAP_MMC_MASTER_CLOCK	96000000
-#define DRIVER_NAME		"mmci-omap-hs"
+#define DRIVER_NAME		"omap_hsmmc"
 
 /* Timeouts for entering power saving states on inactivity, msec */
 #define OMAP_MMC_DISABLED_TIMEOUT	100
@@ -260,7 +260,7 @@ static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
+static int omap_hsmmc_235_set_power(struct device *dev, int slot, int power_on,
 				   int vdd)
 {
 	struct omap_hsmmc_host *host =
@@ -316,6 +316,12 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
+static int omap_hsmmc_4_set_power(struct device *dev, int slot, int power_on,
+					int vdd)
+{
+	return 0;
+}
+
 static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
 				  int vdd, int cardsleep)
 {
@@ -326,7 +332,7 @@ static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
 	return regulator_set_mode(host->vcc, mode);
 }
 
-static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
+static int omap_hsmmc_235_set_sleep(struct device *dev, int slot, int sleep,
 				   int vdd, int cardsleep)
 {
 	struct omap_hsmmc_host *host =
@@ -365,6 +371,12 @@ static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
 		return regulator_enable(host->vcc_aux);
 }
 
+static int omap_hsmmc_4_set_sleep(struct device *dev, int slot, int sleep,
+					int vdd, int cardsleep)
+{
+	return 0;
+}
+
 static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 {
 	struct regulator *reg;
@@ -379,10 +391,14 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 		break;
 	case OMAP_MMC2_DEVID:
 	case OMAP_MMC3_DEVID:
+	case OMAP_MMC5_DEVID:
 		/* Off-chip level shifting, or none */
-		mmc_slot(host).set_power = omap_hsmmc_23_set_power;
-		mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep;
+		mmc_slot(host).set_power = omap_hsmmc_235_set_power;
+		mmc_slot(host).set_sleep = omap_hsmmc_235_set_sleep;
 		break;
+	case OMAP_MMC4_DEVID:
+		mmc_slot(host).set_power = omap_hsmmc_4_set_power;
+		mmc_slot(host).set_sleep = omap_hsmmc_4_set_sleep;
 	default:
 		pr_err("MMC%d configuration not supported!\n", host->id);
 		return -EINVAL;
@@ -1555,7 +1571,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		break;
 	}
 
-	if (host->id == OMAP_MMC1_DEVID) {
+	if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
 		/* Only MMC1 can interface at 3V without some flavor
 		 * of external transceiver; but they all handle 1.8V.
 		 */
@@ -1647,7 +1663,7 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
 	u32 hctl, capa, value;
 
 	/* Only MMC1 supports 3.0V */
-	if (host->id == OMAP_MMC1_DEVID) {
+	if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
 		hctl = SDVS30;
 		capa = VS30 | VS18;
 	} else {
@@ -2101,14 +2117,14 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
 	/* we start off in DISABLED state */
 	host->dpm_state = DISABLED;
 
-	if (mmc_host_enable(host->mmc) != 0) {
+	if (clk_enable(host->iclk) != 0) {
 		clk_put(host->iclk);
 		clk_put(host->fclk);
 		goto err1;
 	}
 
-	if (clk_enable(host->iclk) != 0) {
-		mmc_host_disable(host->mmc);
+	if (mmc_host_enable(host->mmc) != 0) {
+		clk_disable(host->iclk);
 		clk_put(host->iclk);
 		clk_put(host->fclk);
 		goto err1;