Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 124 insertions, 0 deletions

diff --git a/drivers/mmc/pxamci.h b/drivers/mmc/pxamci.h
new file mode 100644
index 000000000000..1b163220df2b
--- /dev/null
+++ b/drivers/mmc/pxamci.h
@@ -0,0 +1,124 @@
+#undef MMC_STRPCL
+#undef MMC_STAT
+#undef MMC_CLKRT
+#undef MMC_SPI
+#undef MMC_CMDAT
+#undef MMC_RESTO
+#undef MMC_RDTO
+#undef MMC_BLKLEN
+#undef MMC_NOB
+#undef MMC_PRTBUF
+#undef MMC_I_MASK
+#undef END_CMD_RES
+#undef PRG_DONE
+#undef DATA_TRAN_DONE
+#undef MMC_I_REG
+#undef MMC_CMD
+#undef MMC_ARGH
+#undef MMC_ARGL
+#undef MMC_RES
+#undef MMC_RXFIFO
+#undef MMC_TXFIFO
+
+#define MMC_STRPCL	0x0000
+#define STOP_CLOCK		(1 << 0)
+#define START_CLOCK		(2 << 0)
+
+#define MMC_STAT	0x0004
+#define STAT_END_CMD_RES		(1 << 13)
+#define STAT_PRG_DONE			(1 << 12)
+#define STAT_DATA_TRAN_DONE		(1 << 11)
+#define STAT_CLK_EN			(1 << 8)
+#define STAT_RECV_FIFO_FULL		(1 << 7)
+#define STAT_XMIT_FIFO_EMPTY		(1 << 6)
+#define STAT_RES_CRC_ERR		(1 << 5)
+#define STAT_SPI_READ_ERROR_TOKEN	(1 << 4)
+#define STAT_CRC_READ_ERROR		(1 << 3)
+#define STAT_CRC_WRITE_ERROR		(1 << 2)
+#define STAT_TIME_OUT_RESPONSE		(1 << 1)
+#define STAT_READ_TIME_OUT		(1 << 0)
+
+#define MMC_CLKRT	0x0008		/* 3 bit */
+
+#define MMC_SPI		0x000c
+#define SPI_CS_ADDRESS		(1 << 3)
+#define SPI_CS_EN		(1 << 2)
+#define CRC_ON			(1 << 1)
+#define SPI_EN			(1 << 0)
+
+#define MMC_CMDAT	0x0010
+#define CMDAT_DMAEN		(1 << 7)
+#define CMDAT_INIT		(1 << 6)
+#define CMDAT_BUSY		(1 << 5)
+#define CMDAT_STREAM		(1 << 4)	/* 1 = stream */
+#define CMDAT_WRITE		(1 << 3)	/* 1 = write */
+#define CMDAT_DATAEN		(1 << 2)
+#define CMDAT_RESP_NONE		(0 << 0)
+#define CMDAT_RESP_SHORT	(1 << 0)
+#define CMDAT_RESP_R2		(2 << 0)
+#define CMDAT_RESP_R3		(3 << 0)
+
+#define MMC_RESTO	0x0014	/* 7 bit */
+
+#define MMC_RDTO	0x0018	/* 16 bit */
+
+#define MMC_BLKLEN	0x001c	/* 10 bit */
+
+#define MMC_NOB		0x0020	/* 16 bit */
+
+#define MMC_PRTBUF	0x0024
+#define BUF_PART_FULL		(1 << 0)
+
+#define MMC_I_MASK	0x0028
+
+/*PXA27x MMC interrupts*/
+#define SDIO_SUSPEND_ACK  	(1 << 12)
+#define SDIO_INT          	(1 << 11)
+#define RD_STALLED        	(1 << 10)
+#define RES_ERR           	(1 << 9)
+#define DAT_ERR           	(1 << 8)
+#define TINT              	(1 << 7)
+
+/*PXA2xx MMC interrupts*/
+#define TXFIFO_WR_REQ		(1 << 6)
+#define RXFIFO_RD_REQ		(1 << 5)
+#define CLK_IS_OFF		(1 << 4)
+#define STOP_CMD		(1 << 3)
+#define END_CMD_RES		(1 << 2)
+#define PRG_DONE		(1 << 1)
+#define DATA_TRAN_DONE		(1 << 0)
+
+#ifdef CONFIG_PXA27x
+#define MMC_I_MASK_ALL          0x00001fff
+#else
+#define MMC_I_MASK_ALL          0x0000007f
+#endif
+
+#define MMC_I_REG	0x002c
+/* same as MMC_I_MASK */
+
+#define MMC_CMD		0x0030
+
+#define MMC_ARGH	0x0034	/* 16 bit */
+
+#define MMC_ARGL	0x0038	/* 16 bit */
+
+#define MMC_RES		0x003c	/* 16 bit */
+
+#define MMC_RXFIFO	0x0040	/* 8 bit */
+
+#define MMC_TXFIFO	0x0044	/* 8 bit */
+
+/*
+ * The base MMC clock rate
+ */
+#ifdef CONFIG_PXA27x
+#define CLOCKRATE_MIN	304688
+#define CLOCKRATE_MAX	19500000
+#else
+#define CLOCKRATE_MIN	312500
+#define CLOCKRATE_MAX	20000000
+#endif
+
+#define CLOCKRATE	CLOCKRATE_MAX
+