Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, the drivers/tee and drivers/reset subsystems get merged
  here, with the expected set of smaller updates and some new hardware
  support. The tee subsystem now supports device drivers to be attached
  to a tee, the first example here is a random number driver with its
  implementation in the secure world.

  Three new power domain drivers get added for specific chip families:
   - Broadcom BCM283x chips (used in Raspberry Pi)
   - Qualcomm Snapdragon phone chips
   - Xilinx ZynqMP FPGA SoCs

  One new driver is added to talk to the BPMP firmware on NVIDIA
  Tegra210

  Existing drivers are extended for new SoC variants from NXP, NVIDIA,
  Amlogic and Qualcomm"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
  tee: optee: update optee_msg.h and optee_smc.h to dual license
  tee: add cancellation support to client interface
  dpaa2-eth: configure the cache stashing amount on a queue
  soc: fsl: dpio: configure cache stashing destination
  soc: fsl: dpio: enable frame data cache stashing per software portal
  soc: fsl: guts: make fsl_guts_get_svr() static
  hwrng: make symbol 'optee_rng_id_table' static
  tee: optee: Fix unsigned comparison with less than zero
  hwrng: Fix unsigned comparison with less than zero
  tee: fix possible error pointer ctx dereferencing
  hwrng: optee: Initialize some structs using memset instead of braces
  tee: optee: Initialize some structs using memset instead of braces
  soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
  clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
  soc: qcom: llcc-slice: Fix typos
  qcom: soc: llcc-slice: Consolidate some code
  qcom: soc: llcc-slice: Clear the global drv_data pointer on error
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  ...

2 files changed, 93 insertions, 0 deletions

diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 12980a4ad460..ee6fb6af655e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
 obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
+obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
 cros_ec_core-objs		:= cros_ec.o
diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
new file mode 100644
index 000000000000..42fe67f1538e
--- /dev/null
+++ b/drivers/mfd/bcm2835-pm.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PM MFD driver for Broadcom BCM2835
+ *
+ * This driver binds to the PM block and creates the MFD device for
+ * the WDT and power drivers.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/bcm2835-pm.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+static const struct mfd_cell bcm2835_pm_devs[] = {
+	{ .name = "bcm2835-wdt" },
+};
+
+static const struct mfd_cell bcm2835_power_devs[] = {
+	{ .name = "bcm2835-power" },
+};
+
+static int bcm2835_pm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct bcm2835_pm *pm;
+	int ret;
+
+	pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL);
+	if (!pm)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, pm);
+
+	pm->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pm->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pm->base))
+		return PTR_ERR(pm->base);
+
+	ret = devm_mfd_add_devices(dev, -1,
+				   bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
+				   NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	/* We'll use the presence of the AXI ASB regs in the
+	 * bcm2835-pm binding as the key for whether we can reference
+	 * the full PM register range and support power domains.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		pm->asb = devm_ioremap_resource(dev, res);
+		if (IS_ERR(pm->asb))
+			return PTR_ERR(pm->asb);
+
+		ret = devm_mfd_add_devices(dev, -1,
+					   bcm2835_power_devs,
+					   ARRAY_SIZE(bcm2835_power_devs),
+					   NULL, 0, NULL);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_pm_of_match[] = {
+	{ .compatible = "brcm,bcm2835-pm-wdt", },
+	{ .compatible = "brcm,bcm2835-pm", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
+
+static struct platform_driver bcm2835_pm_driver = {
+	.probe		= bcm2835_pm_probe,
+	.driver = {
+		.name =	"bcm2835-pm",
+		.of_match_table = bcm2835_pm_of_match,
+	},
+};
+module_platform_driver(bcm2835_pm_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM MFD");
+MODULE_LICENSE("GPL");