diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2012-09-19 19:31:19 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2013-01-29 18:47:37 +0100 |
| commit | 7a4f26097d389c16c9956bc03b81532698d97d64 (patch) | |
| tree | 7b8ef72b5ab68de1724fa7afc3dcf6926c278ee2 /drivers/mfd | |
| parent | b5bbd41784cb607dd4499e893a660a04873d830b (diff) | |
| download | linux-7a4f26097d389c16c9956bc03b81532698d97d64.tar.gz | |
ARM: ux500: de-globalize <mach/id.h>
This removes the file <mach/id.h> from the global kernel include scope, making it a pure mach-ux500 detail. All ASIC specifics needed by drivers shall henceforth be passed from either platform data or the device tree. Cc: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/db8500-prcmu.c | 17 |
1 files changed, 6 insertions, 11 deletions
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index dc8826d8d69d..67d8b25d183e 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/db8500-regs.h> -#include <mach/id.h> #include "dbx500-prcmu-regs.h" /* Offset for the firmware version within the TCPM */ @@ -216,10 +215,8 @@ #define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1) #define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2) #define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3) -#define PRCMU_I2C_WRITE(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) -#define PRCMU_I2C_READ(slave) \ - (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6)) +#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6)) #define PRCMU_I2C_STOP_EN BIT(3) /* Mailbox 5 ACKs */ @@ -1049,12 +1046,13 @@ int db8500_prcmu_get_ddr_opp(void) * * This function sets the operating point of the DDR. */ +static bool enable_set_ddr_opp; int db8500_prcmu_set_ddr_opp(u8 opp) { if (opp < DDR_100_OPP || opp > DDR_25_OPP) return -EINVAL; /* Changing the DDR OPP can hang the hardware pre-v21 */ - if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20()) + if (enable_set_ddr_opp) writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW); return 0; @@ -2790,6 +2788,7 @@ void __init db8500_prcmu_early_init(void) pr_err("prcmu: Unsupported chip version\n"); BUG(); } + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); spin_lock_init(&mb0_transfer.lock); spin_lock_init(&mb0_transfer.dbb_irqs_lock); @@ -3104,9 +3103,6 @@ static int db8500_prcmu_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; int irq = 0, err = 0, i; - if (ux500_is_svp()) - return -ENODEV; - init_prcm_registers(); /* Clean up the mailbox interrupts after pre-kernel code. */ @@ -3135,8 +3131,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) } } - if (cpu_is_u8500v20_or_later()) - prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); + prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); db8500_prcmu_update_cpufreq(); |