Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...

1 files changed, 71 insertions, 37 deletions

diff --git a/drivers/memory/samsung/exynos5422-dmc.c b/drivers/memory/samsung/exynos5422-dmc.c
index 714d1f6f077c..c5ee4121a4d2 100644
--- a/drivers/memory/samsung/exynos5422-dmc.c
+++ b/drivers/memory/samsung/exynos5422-dmc.c
@@ -98,6 +98,8 @@ MODULE_PARM_DESC(irqmode, "Enable IRQ mode (0=off [default], 1=on)");
 
 /**
  * struct dmc_opp_table - Operating level desciption
+ * @freq_hz:		target frequency in Hz
+ * @volt_uv:		target voltage in uV
  *
  * Covers frequency and voltage settings of the DMC operating mode.
  */
@@ -108,6 +110,41 @@ struct dmc_opp_table {
 
 /**
  * struct exynos5_dmc - main structure describing DMC device
+ * @dev:		DMC device
+ * @df:			devfreq device structure returned by devfreq framework
+ * @gov_data:		configuration of devfreq governor
+ * @base_drexi0:	DREX0 registers mapping
+ * @base_drexi1:	DREX1 registers mapping
+ * @clk_regmap:		regmap for clock controller registers
+ * @lock:		protects curr_rate and frequency/voltage setting section
+ * @curr_rate:		current frequency
+ * @curr_volt:		current voltage
+ * @opp:		OPP table
+ * @opp_count:		number of 'opp' elements
+ * @timings_arr_size:	number of 'timings' elements
+ * @timing_row:		values for timing row register, for each OPP
+ * @timing_data:	values for timing data register, for each OPP
+ * @timing_power:	balues for timing power register, for each OPP
+ * @timings:		DDR memory timings, from device tree
+ * @min_tck:		DDR memory minimum timing values, from device tree
+ * @bypass_timing_row:	value for timing row register for bypass timings
+ * @bypass_timing_data:	value for timing data register for bypass timings
+ * @bypass_timing_power:	value for timing power register for bypass
+ *				timings
+ * @vdd_mif:		Memory interface regulator
+ * @fout_spll:		clock: SPLL
+ * @fout_bpll:		clock: BPLL
+ * @mout_spll:		clock: mux SPLL
+ * @mout_bpll:		clock: mux BPLL
+ * @mout_mclk_cdrex:	clock: mux mclk_cdrex
+ * @mout_mx_mspll_ccore:	clock: mux mx_mspll_ccore
+ * @counter:		devfreq events
+ * @num_counters:	number of 'counter' elements
+ * @last_overflow_ts:	time (in ns) of last overflow of each DREX
+ * @load:		utilization in percents
+ * @total:		total time between devfreq events
+ * @in_irq_mode:	whether running in interrupt mode (true)
+ *			or polling (false)
  *
  * The main structure for the Dynamic Memory Controller which covers clocks,
  * memory regions, HW information, parameters and current operating mode.
@@ -119,12 +156,11 @@ struct exynos5_dmc {
 	void __iomem *base_drexi0;
 	void __iomem *base_drexi1;
 	struct regmap *clk_regmap;
+	/* Protects curr_rate and frequency/voltage setting section */
 	struct mutex lock;
 	unsigned long curr_rate;
 	unsigned long curr_volt;
-	unsigned long bypass_rate;
 	struct dmc_opp_table *opp;
-	struct dmc_opp_table opp_bypass;
 	int opp_count;
 	u32 timings_arr_size;
 	u32 *timing_row;
@@ -142,8 +178,6 @@ struct exynos5_dmc {
 	struct clk *mout_bpll;
 	struct clk *mout_mclk_cdrex;
 	struct clk *mout_mx_mspll_ccore;
-	struct clk *mx_mspll_ccore_phy;
-	struct clk *mout_mx_mspll_ccore_phy;
 	struct devfreq_event_dev **counter;
 	int num_counters;
 	u64 last_overflow_ts[2];
@@ -169,7 +203,7 @@ struct timing_reg {
 	unsigned int val;
 };
 
-static const struct timing_reg timing_row[] = {
+static const struct timing_reg timing_row_reg_fields[] = {
 	TIMING_FIELD("tRFC", 24, 31),
 	TIMING_FIELD("tRRD", 20, 23),
 	TIMING_FIELD("tRP", 16, 19),
@@ -178,7 +212,7 @@ static const struct timing_reg timing_row[] = {
 	TIMING_FIELD("tRAS", 0, 5),
 };
 
-static const struct timing_reg timing_data[] = {
+static const struct timing_reg timing_data_reg_fields[] = {
 	TIMING_FIELD("tWTR", 28, 31),
 	TIMING_FIELD("tWR", 24, 27),
 	TIMING_FIELD("tRTP", 20, 23),
@@ -189,7 +223,7 @@ static const struct timing_reg timing_data[] = {
 	TIMING_FIELD("RL", 0, 3),
 };
 
-static const struct timing_reg timing_power[] = {
+static const struct timing_reg timing_power_reg_fields[] = {
 	TIMING_FIELD("tFAW", 26, 31),
 	TIMING_FIELD("tXSR", 16, 25),
 	TIMING_FIELD("tXP", 8, 15),
@@ -197,8 +231,9 @@ static const struct timing_reg timing_power[] = {
 	TIMING_FIELD("tMRD", 0, 3),
 };
 
-#define TIMING_COUNT (ARRAY_SIZE(timing_row) + ARRAY_SIZE(timing_data) + \
-		      ARRAY_SIZE(timing_power))
+#define TIMING_COUNT (ARRAY_SIZE(timing_row_reg_fields) + \
+		      ARRAY_SIZE(timing_data_reg_fields) + \
+		      ARRAY_SIZE(timing_power_reg_fields))
 
 static int exynos5_counters_set_event(struct exynos5_dmc *dmc)
 {
@@ -346,7 +381,6 @@ err_opp:
 /**
  * exynos5_set_bypass_dram_timings() - Low-level changes of the DRAM timings
  * @dmc:	device for which the new settings is going to be applied
- * @param:	DRAM parameters which passes timing data
  *
  * Low-level function for changing timings for DRAM memory clocking from
  * 'bypass' clock source (fixed frequency @400MHz).
@@ -453,9 +487,6 @@ static int exynos5_dmc_align_bypass_voltage(struct exynos5_dmc *dmc,
 					    unsigned long target_volt)
 {
 	int ret = 0;
-	unsigned long bypass_volt = dmc->opp_bypass.volt_uv;
-
-	target_volt = max(bypass_volt, target_volt);
 
 	if (dmc->curr_volt >= target_volt)
 		return 0;
@@ -617,6 +648,7 @@ disable_clocks:
  *			requested
  * @target_volt:	returned voltage which corresponds to the returned
  *			frequency
+ * @flags:	devfreq flags provided for this frequency change request
  *
  * Function gets requested frequency and checks OPP framework for needed
  * frequency and voltage. It populates the values 'target_rate' and
@@ -908,7 +940,10 @@ static int exynos5_dmc_get_status(struct device *dev,
 	int ret;
 
 	if (dmc->in_irq_mode) {
+		mutex_lock(&dmc->lock);
 		stat->current_frequency = dmc->curr_rate;
+		mutex_unlock(&dmc->lock);
+
 		stat->busy_time = dmc->load;
 		stat->total_time = dmc->total;
 	} else {
@@ -950,7 +985,7 @@ static int exynos5_dmc_get_cur_freq(struct device *dev, unsigned long *freq)
 	return 0;
 }
 
-/**
+/*
  * exynos5_dmc_df_profile - Devfreq governor's profile structure
  *
  * It provides to the devfreq framework needed functions and polling period.
@@ -993,7 +1028,9 @@ exynos5_dmc_align_init_freq(struct exynos5_dmc *dmc,
 /**
  * create_timings_aligned() - Create register values and align with standard
  * @dmc:	device for which the frequency is going to be set
- * @idx:	speed bin in the OPP table
+ * @reg_timing_row:	array to fill with values for timing row register
+ * @reg_timing_data:	array to fill with values for timing data register
+ * @reg_timing_power:	array to fill with values for timing power register
  * @clk_period_ps:	the period of the clock, known as tCK
  *
  * The function calculates timings and creates a register value ready for
@@ -1018,117 +1055,117 @@ static int create_timings_aligned(struct exynos5_dmc *dmc, u32 *reg_timing_row,
 	val = dmc->timings->tRFC / clk_period_ps;
 	val += dmc->timings->tRFC % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRFC);
-	reg = &timing_row[0];
+	reg = &timing_row_reg_fields[0];
 	*reg_timing_row |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tRRD / clk_period_ps;
 	val += dmc->timings->tRRD % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRRD);
-	reg = &timing_row[1];
+	reg = &timing_row_reg_fields[1];
 	*reg_timing_row |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tRPab / clk_period_ps;
 	val += dmc->timings->tRPab % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRPab);
-	reg = &timing_row[2];
+	reg = &timing_row_reg_fields[2];
 	*reg_timing_row |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tRCD / clk_period_ps;
 	val += dmc->timings->tRCD % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRCD);
-	reg = &timing_row[3];
+	reg = &timing_row_reg_fields[3];
 	*reg_timing_row |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tRC / clk_period_ps;
 	val += dmc->timings->tRC % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRC);
-	reg = &timing_row[4];
+	reg = &timing_row_reg_fields[4];
 	*reg_timing_row |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tRAS / clk_period_ps;
 	val += dmc->timings->tRAS % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRAS);
-	reg = &timing_row[5];
+	reg = &timing_row_reg_fields[5];
 	*reg_timing_row |= TIMING_VAL2REG(reg, val);
 
 	/* data related timings */
 	val = dmc->timings->tWTR / clk_period_ps;
 	val += dmc->timings->tWTR % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tWTR);
-	reg = &timing_data[0];
+	reg = &timing_data_reg_fields[0];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tWR / clk_period_ps;
 	val += dmc->timings->tWR % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tWR);
-	reg = &timing_data[1];
+	reg = &timing_data_reg_fields[1];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tRTP / clk_period_ps;
 	val += dmc->timings->tRTP % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRTP);
-	reg = &timing_data[2];
+	reg = &timing_data_reg_fields[2];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tW2W_C2C / clk_period_ps;
 	val += dmc->timings->tW2W_C2C % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tW2W_C2C);
-	reg = &timing_data[3];
+	reg = &timing_data_reg_fields[3];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tR2R_C2C / clk_period_ps;
 	val += dmc->timings->tR2R_C2C % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tR2R_C2C);
-	reg = &timing_data[4];
+	reg = &timing_data_reg_fields[4];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tWL / clk_period_ps;
 	val += dmc->timings->tWL % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tWL);
-	reg = &timing_data[5];
+	reg = &timing_data_reg_fields[5];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tDQSCK / clk_period_ps;
 	val += dmc->timings->tDQSCK % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tDQSCK);
-	reg = &timing_data[6];
+	reg = &timing_data_reg_fields[6];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tRL / clk_period_ps;
 	val += dmc->timings->tRL % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tRL);
-	reg = &timing_data[7];
+	reg = &timing_data_reg_fields[7];
 	*reg_timing_data |= TIMING_VAL2REG(reg, val);
 
 	/* power related timings */
 	val = dmc->timings->tFAW / clk_period_ps;
 	val += dmc->timings->tFAW % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tFAW);
-	reg = &timing_power[0];
+	reg = &timing_power_reg_fields[0];
 	*reg_timing_power |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tXSR / clk_period_ps;
 	val += dmc->timings->tXSR % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tXSR);
-	reg = &timing_power[1];
+	reg = &timing_power_reg_fields[1];
 	*reg_timing_power |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tXP / clk_period_ps;
 	val += dmc->timings->tXP % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tXP);
-	reg = &timing_power[2];
+	reg = &timing_power_reg_fields[2];
 	*reg_timing_power |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tCKE / clk_period_ps;
 	val += dmc->timings->tCKE % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tCKE);
-	reg = &timing_power[3];
+	reg = &timing_power_reg_fields[3];
 	*reg_timing_power |= TIMING_VAL2REG(reg, val);
 
 	val = dmc->timings->tMRD / clk_period_ps;
 	val += dmc->timings->tMRD % clk_period_ps ? 1 : 0;
 	val = max(val, dmc->min_tck->tMRD);
-	reg = &timing_power[4];
+	reg = &timing_power_reg_fields[4];
 	*reg_timing_power |= TIMING_VAL2REG(reg, val);
 
 	return 0;
@@ -1263,8 +1300,6 @@ static int exynos5_dmc_init_clks(struct exynos5_dmc *dmc)
 
 	clk_set_parent(dmc->mout_mx_mspll_ccore, dmc->mout_spll);
 
-	dmc->bypass_rate = clk_get_rate(dmc->mout_mx_mspll_ccore);
-
 	clk_prepare_enable(dmc->fout_bpll);
 	clk_prepare_enable(dmc->mout_bpll);
 
@@ -1332,7 +1367,6 @@ static int exynos5_performance_counters_init(struct exynos5_dmc *dmc)
 /**
  * exynos5_dmc_set_pause_on_switching() - Controls a pause feature in DMC
  * @dmc:	device which is used for changing this feature
- * @set:	a boolean state passing enable/disable request
  *
  * There is a need of pausing DREX DMC when divider or MUX in clock tree
  * changes its configuration. In such situation access to the memory is blocked