Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

8 files changed, 2417 insertions, 0 deletions

diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile
new file mode 100644
index 000000000000..bca41ad93de8
--- /dev/null
+++ b/drivers/media/video/ovcamchip/Makefile
@@ -0,0 +1,4 @@
+ovcamchip-objs     := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \
+                      ov76be.o
+
+obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o
diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c
new file mode 100644
index 000000000000..3433619ad93f
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov6x20.c
@@ -0,0 +1,415 @@
+/* OmniVision OV6620/OV6120 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN		0x00	/* gain [5:0] */
+#define REG_BLUE		0x01	/* blue gain */
+#define REG_RED			0x02	/* red gain */
+#define REG_SAT			0x03	/* saturation */
+#define REG_CNT			0x05	/* Y contrast */
+#define REG_BRT			0x06	/* Y brightness */
+#define REG_WB_BLUE		0x0C	/* WB blue ratio [5:0] */
+#define REG_WB_RED		0x0D	/* WB red ratio [5:0] */
+#define REG_EXP			0x10	/* exposure */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3A
+#define VWSBASE 0x05
+#define VWEBASE 0x06
+
+struct ov6x20 {
+	int auto_brt;
+	int auto_exp;
+	int backlight;
+	int bandfilt;
+	int mirror;
+};
+
+/* Initial values for use with OV511/OV511+ cameras */
+static struct ovcamchip_regvals regvals_init_6x20_511[] = {
+	{ 0x12, 0x80 }, /* reset */
+	{ 0x11, 0x01 },
+	{ 0x03, 0x60 },
+	{ 0x05, 0x7f }, /* For when autoadjust is off */
+	{ 0x07, 0xa8 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0x0f, 0x15 }, /* COMS */
+	{ 0x10, 0x75 }, /* AEC Exposure time */
+	{ 0x12, 0x24 }, /* Enable AGC and AWB */
+	{ 0x14, 0x04 },
+	{ 0x16, 0x03 },
+	{ 0x26, 0xb2 }, /* BLC enable */
+	/* 0x28: 0x05 Selects RGB format if RGB on */
+	{ 0x28, 0x05 },
+	{ 0x2a, 0x04 }, /* Disable framerate adjust */
+	{ 0x2d, 0x99 },
+	{ 0x33, 0xa0 }, /* Color Processing Parameter */
+	{ 0x34, 0xd2 }, /* Max A/D range */
+	{ 0x38, 0x8b },
+	{ 0x39, 0x40 },
+
+	{ 0x3c, 0x39 }, /* Enable AEC mode changing */
+	{ 0x3c, 0x3c }, /* Change AEC mode */
+	{ 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+	{ 0x3d, 0x80 },
+	/* These next two registers (0x4a, 0x4b) are undocumented. They
+	 * control the color balance */
+	{ 0x4a, 0x80 },
+	{ 0x4b, 0x80 },
+	{ 0x4d, 0xd2 }, /* This reduces noise a bit */
+	{ 0x4e, 0xc1 },
+	{ 0x4f, 0x04 },
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* Initial values for use with OV518 cameras */
+static struct ovcamchip_regvals regvals_init_6x20_518[] = {
+	{ 0x12, 0x80 }, /* Do a reset */
+	{ 0x03, 0xc0 }, /* Saturation */
+	{ 0x05, 0x8a }, /* Contrast */
+	{ 0x0c, 0x24 }, /* AWB blue */
+	{ 0x0d, 0x24 }, /* AWB red */
+	{ 0x0e, 0x8d }, /* Additional 2x gain */
+	{ 0x0f, 0x25 }, /* Black expanding level = 1.3V */
+	{ 0x11, 0x01 }, /* Clock div. */
+	{ 0x12, 0x24 }, /* Enable AGC and AWB */
+	{ 0x13, 0x01 }, /* (default) */
+	{ 0x14, 0x80 }, /* Set reserved bit 7 */
+	{ 0x15, 0x01 }, /* (default) */
+	{ 0x16, 0x03 }, /* (default) */
+	{ 0x17, 0x38 }, /* (default) */
+	{ 0x18, 0xea }, /* (default) */
+	{ 0x19, 0x04 },
+	{ 0x1a, 0x93 },
+	{ 0x1b, 0x00 }, /* (default) */
+	{ 0x1e, 0xc4 }, /* (default) */
+	{ 0x1f, 0x04 }, /* (default) */
+	{ 0x20, 0x20 }, /* Enable 1st stage aperture correction */
+	{ 0x21, 0x10 }, /* Y offset */
+	{ 0x22, 0x88 }, /* U offset */
+	{ 0x23, 0xc0 }, /* Set XTAL power level */
+	{ 0x24, 0x53 }, /* AEC bright ratio */
+	{ 0x25, 0x7a }, /* AEC black ratio */
+	{ 0x26, 0xb2 }, /* BLC enable */
+	{ 0x27, 0xa2 }, /* Full output range */
+	{ 0x28, 0x01 }, /* (default) */
+	{ 0x29, 0x00 }, /* (default) */
+	{ 0x2a, 0x84 }, /* (default) */
+	{ 0x2b, 0xa8 }, /* Set custom frame rate */
+	{ 0x2c, 0xa0 }, /* (reserved) */
+	{ 0x2d, 0x95 }, /* Enable banding filter */
+	{ 0x2e, 0x88 }, /* V offset */
+	{ 0x33, 0x22 }, /* Luminance gamma on */
+	{ 0x34, 0xc7 }, /* A/D bias */
+	{ 0x36, 0x12 }, /* (reserved) */
+	{ 0x37, 0x63 }, /* (reserved) */
+	{ 0x38, 0x8b }, /* Quick AEC/AEB */
+	{ 0x39, 0x00 }, /* (default) */
+	{ 0x3a, 0x0f }, /* (default) */
+	{ 0x3b, 0x3c }, /* (default) */
+	{ 0x3c, 0x5c }, /* AEC controls */
+	{ 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */
+	{ 0x3e, 0x80 }, /* (default) */
+	{ 0x3f, 0x02 }, /* (default) */
+	{ 0x40, 0x10 }, /* (reserved) */
+	{ 0x41, 0x10 }, /* (reserved) */
+	{ 0x42, 0x00 }, /* (reserved) */
+	{ 0x43, 0x7f }, /* (reserved) */
+	{ 0x44, 0x80 }, /* (reserved) */
+	{ 0x45, 0x1c }, /* (reserved) */
+	{ 0x46, 0x1c }, /* (reserved) */
+	{ 0x47, 0x80 }, /* (reserved) */
+	{ 0x48, 0x5f }, /* (reserved) */
+	{ 0x49, 0x00 }, /* (reserved) */
+	{ 0x4a, 0x00 }, /* Color balance (undocumented) */
+	{ 0x4b, 0x80 }, /* Color balance (undocumented) */
+	{ 0x4c, 0x58 }, /* (reserved) */
+	{ 0x4d, 0xd2 }, /* U *= .938, V *= .838 */
+	{ 0x4e, 0xa0 }, /* (default) */
+	{ 0x4f, 0x04 }, /* UV 3-point average */
+	{ 0x50, 0xff }, /* (reserved) */
+	{ 0x51, 0x58 }, /* (reserved) */
+	{ 0x52, 0xc0 }, /* (reserved) */
+	{ 0x53, 0x42 }, /* (reserved) */
+	{ 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */
+	{ 0x12, 0x20 },
+	{ 0x12, 0x24 },
+
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* This initializes the OV6x20 camera chip and relevant variables. */
+static int ov6x20_init(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov6x20 *s;
+	int rc;
+
+	DDEBUG(4, &c->dev, "entered");
+
+	switch (c->adapter->id) {
+	case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511:
+		rc = ov_write_regvals(c, regvals_init_6x20_511);
+		break;
+	case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518:
+		rc = ov_write_regvals(c, regvals_init_6x20_518);
+		break;
+	default:
+		dev_err(&c->dev, "ov6x20: Unsupported adapter\n");
+		rc = -ENODEV;
+	}
+
+	if (rc < 0)
+		return rc;
+
+	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+	memset(s, 0, sizeof *s);
+
+	s->auto_brt = 1;
+	s->auto_exp = 1;
+
+	return rc;
+}
+
+static int ov6x20_free(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+
+	kfree(ov->spriv);
+	return 0;
+}
+
+static int ov6x20_set_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov6x20 *s = ov->spriv;
+	int rc;
+	int v = ctl->value;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+		rc = ov_write(c, REG_CNT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_write(c, REG_BRT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_write(c, REG_SAT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_HUE:
+		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, REG_BLUE, v >> 8);
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_write(c, REG_EXP, v);
+		break;
+	case OVCAMCHIP_CID_FREQ:
+	{
+		int sixty = (v == 60);
+
+		rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
+		break;
+	}
+	case OVCAMCHIP_CID_BANDFILT:
+		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+		s->bandfilt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+		s->auto_brt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
+		s->auto_exp = v;
+		break;
+	case OVCAMCHIP_CID_BACKLIGHT:
+	{
+		rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80);
+		s->backlight = v;
+		break;
+	}
+	case OVCAMCHIP_CID_MIRROR:
+		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+		s->mirror = v;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+out:
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+	return rc;
+}
+
+static int ov6x20_get_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov6x20 *s = ov->spriv;
+	int rc = 0;
+	unsigned char val = 0;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+		rc = ov_read(c, REG_CNT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_read(c, REG_BRT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_read(c, REG_SAT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_HUE:
+		rc = ov_read(c, REG_BLUE, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_read(c, REG_EXP, &val);
+		ctl->value = val;
+		break;
+	case OVCAMCHIP_CID_BANDFILT:
+		ctl->value = s->bandfilt;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		ctl->value = s->auto_brt;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		ctl->value = s->auto_exp;
+		break;
+	case OVCAMCHIP_CID_BACKLIGHT:
+		ctl->value = s->backlight;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		ctl->value = s->mirror;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+	return rc;
+}
+
+static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	/******** QCIF-specific regs ********/
+
+	ov_write(c, 0x14, win->quarter?0x24:0x04);
+
+	/******** Palette-specific regs ********/
+
+	/* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */
+	if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+		if (win->format == VIDEO_PALETTE_GREY)
+			ov_write_mask(c, 0x13, 0x00, 0x20);
+		else
+			ov_write_mask(c, 0x13, 0x20, 0x20);
+	} else {
+		if (win->format == VIDEO_PALETTE_GREY)
+			ov_write_mask(c, 0x13, 0x20, 0x20);
+		else
+			ov_write_mask(c, 0x13, 0x00, 0x20);
+	}
+
+	/******** Clock programming ********/
+
+	/* The OV6620 needs special handling. This prevents the
+	 * severe banding that normally occurs */
+
+	/* Clock down */
+	ov_write(c, 0x2a, 0x04);
+
+	ov_write(c, 0x11, win->clockdiv);
+
+	ov_write(c, 0x2a, 0x84);
+	/* This next setting is critical. It seems to improve
+	 * the gain or the contrast. The "reserved" bits seem
+	 * to have some effect in this case. */
+	ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */
+
+	return 0;
+}
+
+static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int ret, hwscale, vwscale;
+
+	ret = ov6x20_mode_init(c, win);
+	if (ret < 0)
+		return ret;
+
+	if (win->quarter) {
+		hwscale = 0;
+		vwscale = 0;
+	} else {
+		hwscale = 1;
+		vwscale = 1;	/* The datasheet says 0; it's wrong */
+	}
+
+	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+	return 0;
+}
+
+static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+	switch (cmd) {
+	case OVCAMCHIP_CMD_S_CTRL:
+		return ov6x20_set_control(c, arg);
+	case OVCAMCHIP_CMD_G_CTRL:
+		return ov6x20_get_control(c, arg);
+	case OVCAMCHIP_CMD_S_MODE:
+		return ov6x20_set_window(c, arg);
+	default:
+		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+		return -ENOIOCTLCMD;
+	}
+}
+
+struct ovcamchip_ops ov6x20_ops = {
+	.init    =	ov6x20_init,
+	.free    =	ov6x20_free,
+	.command =	ov6x20_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c
new file mode 100644
index 000000000000..44a842379b45
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov6x30.c
@@ -0,0 +1,374 @@
+/* OmniVision OV6630/OV6130 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN		0x00	/* gain [5:0] */
+#define REG_BLUE		0x01	/* blue gain */
+#define REG_RED			0x02	/* red gain */
+#define REG_SAT			0x03	/* saturation [7:3] */
+#define REG_CNT			0x05	/* Y contrast [3:0] */
+#define REG_BRT			0x06	/* Y brightness */
+#define REG_SHARP		0x07	/* sharpness */
+#define REG_WB_BLUE		0x0C	/* WB blue ratio [5:0] */
+#define REG_WB_RED		0x0D	/* WB red ratio [5:0] */
+#define REG_EXP			0x10	/* exposure */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3A
+#define VWSBASE 0x05
+#define VWEBASE 0x06
+
+struct ov6x30 {
+	int auto_brt;
+	int auto_exp;
+	int backlight;
+	int bandfilt;
+	int mirror;
+};
+
+static struct ovcamchip_regvals regvals_init_6x30[] = {
+	{ 0x12, 0x80 }, /* reset */
+	{ 0x00, 0x1f }, /* Gain */
+	{ 0x01, 0x99 }, /* Blue gain */
+	{ 0x02, 0x7c }, /* Red gain */
+	{ 0x03, 0xc0 }, /* Saturation */
+	{ 0x05, 0x0a }, /* Contrast */
+	{ 0x06, 0x95 }, /* Brightness */
+	{ 0x07, 0x2d }, /* Sharpness */
+	{ 0x0c, 0x20 },
+	{ 0x0d, 0x20 },
+	{ 0x0e, 0x20 },
+	{ 0x0f, 0x05 },
+	{ 0x10, 0x9a }, /* "exposure check" */
+	{ 0x11, 0x00 }, /* Pixel clock = fastest */
+	{ 0x12, 0x24 }, /* Enable AGC and AWB */
+	{ 0x13, 0x21 },
+	{ 0x14, 0x80 },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x03 },
+	{ 0x17, 0x38 },
+	{ 0x18, 0xea },
+	{ 0x19, 0x04 },
+	{ 0x1a, 0x93 },
+	{ 0x1b, 0x00 },
+	{ 0x1e, 0xc4 },
+	{ 0x1f, 0x04 },
+	{ 0x20, 0x20 },
+	{ 0x21, 0x10 },
+	{ 0x22, 0x88 },
+	{ 0x23, 0xc0 }, /* Crystal circuit power level */
+	{ 0x25, 0x9a }, /* Increase AEC black pixel ratio */
+	{ 0x26, 0xb2 }, /* BLC enable */
+	{ 0x27, 0xa2 },
+	{ 0x28, 0x00 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x84 }, /* (keep) */
+	{ 0x2b, 0xa8 }, /* (keep) */
+	{ 0x2c, 0xa0 },
+	{ 0x2d, 0x95 },	/* Enable auto-brightness */
+	{ 0x2e, 0x88 },
+	{ 0x33, 0x26 },
+	{ 0x34, 0x03 },
+	{ 0x36, 0x8f },
+	{ 0x37, 0x80 },
+	{ 0x38, 0x83 },
+	{ 0x39, 0x80 },
+	{ 0x3a, 0x0f },
+	{ 0x3b, 0x3c },
+	{ 0x3c, 0x1a },
+	{ 0x3d, 0x80 },
+	{ 0x3e, 0x80 },
+	{ 0x3f, 0x0e },
+	{ 0x40, 0x00 }, /* White bal */
+	{ 0x41, 0x00 }, /* White bal */
+	{ 0x42, 0x80 },
+	{ 0x43, 0x3f }, /* White bal */
+	{ 0x44, 0x80 },
+	{ 0x45, 0x20 },
+	{ 0x46, 0x20 },
+	{ 0x47, 0x80 },
+	{ 0x48, 0x7f },
+	{ 0x49, 0x00 },
+	{ 0x4a, 0x00 },
+	{ 0x4b, 0x80 },
+	{ 0x4c, 0xd0 },
+	{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+	{ 0x4e, 0x40 },
+	{ 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
+	{ 0x50, 0xff },
+	{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
+	{ 0x55, 0xff },
+	{ 0x56, 0x12 },
+	{ 0x57, 0x81 }, /* (default) */
+	{ 0x58, 0x75 },
+	{ 0x59, 0x01 }, /* AGC dark current compensation: +1 */
+	{ 0x5a, 0x2c },
+	{ 0x5b, 0x0f }, /* AWB chrominance levels */
+	{ 0x5c, 0x10 },
+	{ 0x3d, 0x80 },
+	{ 0x27, 0xa6 },
+	/* Toggle AWB off and on */
+	{ 0x12, 0x20 },
+	{ 0x12, 0x24 },
+
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* This initializes the OV6x30 camera chip and relevant variables. */
+static int ov6x30_init(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov6x30 *s;
+	int rc;
+
+	DDEBUG(4, &c->dev, "entered");
+
+	rc = ov_write_regvals(c, regvals_init_6x30);
+	if (rc < 0)
+		return rc;
+
+	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+	memset(s, 0, sizeof *s);
+
+	s->auto_brt = 1;
+	s->auto_exp = 1;
+
+	return rc;
+}
+
+static int ov6x30_free(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+
+	kfree(ov->spriv);
+	return 0;
+}
+
+static int ov6x30_set_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov6x30 *s = ov->spriv;
+	int rc;
+	int v = ctl->value;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+		rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
+		break;
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_write(c, REG_BRT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_write(c, REG_SAT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_HUE:
+		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, REG_BLUE, v >> 8);
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_write(c, REG_EXP, v);
+		break;
+	case OVCAMCHIP_CID_FREQ:
+	{
+		int sixty = (v == 60);
+
+		rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
+		break;
+	}
+	case OVCAMCHIP_CID_BANDFILT:
+		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+		s->bandfilt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+		s->auto_brt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
+		s->auto_exp = v;
+		break;
+	case OVCAMCHIP_CID_BACKLIGHT:
+	{
+		rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
+		s->backlight = v;
+		break;
+	}
+	case OVCAMCHIP_CID_MIRROR:
+		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+		s->mirror = v;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+out:
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+	return rc;
+}
+
+static int ov6x30_get_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov6x30 *s = ov->spriv;
+	int rc = 0;
+	unsigned char val = 0;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+		rc = ov_read(c, REG_CNT, &val);
+		ctl->value = (val & 0x0f) << 12;
+		break;
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_read(c, REG_BRT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_read(c, REG_SAT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_HUE:
+		rc = ov_read(c, REG_BLUE, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_read(c, REG_EXP, &val);
+		ctl->value = val;
+		break;
+	case OVCAMCHIP_CID_BANDFILT:
+		ctl->value = s->bandfilt;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		ctl->value = s->auto_brt;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		ctl->value = s->auto_exp;
+		break;
+	case OVCAMCHIP_CID_BACKLIGHT:
+		ctl->value = s->backlight;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		ctl->value = s->mirror;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+	return rc;
+}
+
+static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	/******** QCIF-specific regs ********/
+
+	ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);
+
+	/******** Palette-specific regs ********/
+
+	if (win->format == VIDEO_PALETTE_GREY) {
+		if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+			/* Do nothing - we're already in 8-bit mode */
+		} else {
+			ov_write_mask(c, 0x13, 0x20, 0x20);
+		}
+	} else {
+		/* The OV518 needs special treatment. Although both the OV518
+		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
+		 * bus is actually used. The UV bus is tied to ground.
+		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
+		 * output mode */
+
+		if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+			/* Do nothing - we want to stay in 8-bit mode */
+			/* Warning: Messing with reg 0x13 breaks OV518 color */
+		} else {
+			ov_write_mask(c, 0x13, 0x00, 0x20);
+		}
+	}
+
+	/******** Clock programming ********/
+
+	ov_write(c, 0x11, win->clockdiv);
+
+	return 0;
+}
+
+static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int ret, hwscale, vwscale;
+
+	ret = ov6x30_mode_init(c, win);
+	if (ret < 0)
+		return ret;
+
+	if (win->quarter) {
+		hwscale = 0;
+		vwscale = 0;
+	} else {
+		hwscale = 1;
+		vwscale = 1;	/* The datasheet says 0; it's wrong */
+	}
+
+	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+	return 0;
+}
+
+static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+	switch (cmd) {
+	case OVCAMCHIP_CMD_S_CTRL:
+		return ov6x30_set_control(c, arg);
+	case OVCAMCHIP_CMD_G_CTRL:
+		return ov6x30_get_control(c, arg);
+	case OVCAMCHIP_CMD_S_MODE:
+		return ov6x30_set_window(c, arg);
+	default:
+		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+		return -ENOIOCTLCMD;
+	}
+}
+
+struct ovcamchip_ops ov6x30_ops = {
+	.init    =	ov6x30_init,
+	.free    =	ov6x30_free,
+	.command =	ov6x30_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov76be.c b/drivers/media/video/ovcamchip/ov76be.c
new file mode 100644
index 000000000000..29bbdc05e3b6
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov76be.c
@@ -0,0 +1,303 @@
+/* OmniVision OV76BE Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
+ * for now. */
+#define REG_GAIN		0x00	/* gain [5:0] */
+#define REG_BLUE		0x01	/* blue channel balance */
+#define REG_RED			0x02	/* red channel balance */
+#define REG_SAT			0x03	/* saturation */
+#define REG_CNT			0x05	/* Y contrast */
+#define REG_BRT			0x06	/* Y brightness */
+#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
+#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
+#define REG_GAMMA_COEFF		0x0E	/* gamma settings */
+#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
+#define REG_EXP			0x10	/* manual exposure setting */
+#define REG_CLOCK		0x11	/* polarity/clock prescaler */
+#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
+#define REG_HWIN_START		0x17	/* horizontal window start */
+#define REG_HWIN_END		0x18	/* horizontal window end */
+#define REG_VWIN_START		0x19	/* vertical window start */
+#define REG_VWIN_END		0x1A	/* vertical window end */
+#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
+#define REG_YOFFSET		0x21	/* Y channel offset */
+#define REG_UOFFSET		0x22	/* U channel offset */
+#define REG_ECW			0x24	/* exposure white level for AEC */
+#define REG_ECB			0x25	/* exposure black level for AEC */
+#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
+#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
+#define REG_ALC			0x2C	/* Auto Level Control settings */
+#define REG_VOFFSET		0x2E	/* V channel offset adjustment */
+#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
+#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
+#define REG_BIAS_ADJUST		0x34	/* misc bias settings */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3a
+#define VWSBASE 0x05
+#define VWEBASE 0x05
+
+struct ov76be {
+	int auto_brt;
+	int auto_exp;
+	int bandfilt;
+	int mirror;
+};
+
+/* NOTE: These are the same as the 7x10 settings, but should eventually be
+ * optimized for the OV76BE */
+static struct ovcamchip_regvals regvals_init_76be[] = {
+	{ 0x10, 0xff },
+	{ 0x16, 0x03 },
+	{ 0x28, 0x24 },
+	{ 0x2b, 0xac },
+	{ 0x12, 0x00 },
+	{ 0x38, 0x81 },
+	{ 0x28, 0x24 },	/* 0c */
+	{ 0x0f, 0x85 },	/* lg's setting */
+	{ 0x15, 0x01 },
+	{ 0x20, 0x1c },
+	{ 0x23, 0x2a },
+	{ 0x24, 0x10 },
+	{ 0x25, 0x8a },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xc2 },
+	{ 0x2a, 0x04 },
+	{ 0x2c, 0xfe },
+	{ 0x2d, 0x93 },
+	{ 0x30, 0x71 },
+	{ 0x31, 0x60 },
+	{ 0x32, 0x26 },
+	{ 0x33, 0x20 },
+	{ 0x34, 0x48 },
+	{ 0x12, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* This initializes the OV76be camera chip and relevant variables. */
+static int ov76be_init(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov76be *s;
+	int rc;
+
+	DDEBUG(4, &c->dev, "entered");
+
+	rc = ov_write_regvals(c, regvals_init_76be);
+	if (rc < 0)
+		return rc;
+
+	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+	memset(s, 0, sizeof *s);
+
+	s->auto_brt = 1;
+	s->auto_exp = 1;
+
+	return rc;
+}
+
+static int ov76be_free(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+
+	kfree(ov->spriv);
+	return 0;
+}
+
+static int ov76be_set_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov76be *s = ov->spriv;
+	int rc;
+	int v = ctl->value;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_write(c, REG_BRT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_write(c, REG_SAT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_write(c, REG_EXP, v);
+		break;
+	case OVCAMCHIP_CID_FREQ:
+	{
+		int sixty = (v == 60);
+
+		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
+		break;
+	}
+	case OVCAMCHIP_CID_BANDFILT:
+		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+		s->bandfilt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+		s->auto_brt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
+		s->auto_exp = v;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+		s->mirror = v;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+out:
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+	return rc;
+}
+
+static int ov76be_get_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov76be *s = ov->spriv;
+	int rc = 0;
+	unsigned char val = 0;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_read(c, REG_BRT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_read(c, REG_SAT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_read(c, REG_EXP, &val);
+		ctl->value = val;
+		break;
+	case OVCAMCHIP_CID_BANDFILT:
+		ctl->value = s->bandfilt;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		ctl->value = s->auto_brt;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		ctl->value = s->auto_exp;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		ctl->value = s->mirror;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+	return rc;
+}
+
+static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int qvga = win->quarter;
+
+	/******** QVGA-specific regs ********/
+
+	ov_write(c, 0x14, qvga?0xa4:0x84);
+
+	/******** Palette-specific regs ********/
+
+	if (win->format == VIDEO_PALETTE_GREY) {
+		ov_write_mask(c, 0x0e, 0x40, 0x40);
+		ov_write_mask(c, 0x13, 0x20, 0x20);
+	} else {
+		ov_write_mask(c, 0x0e, 0x00, 0x40);
+		ov_write_mask(c, 0x13, 0x00, 0x20);
+	}
+
+	/******** Clock programming ********/
+
+	ov_write(c, 0x11, win->clockdiv);
+
+	/******** Resolution-specific ********/
+
+	if (win->width == 640 && win->height == 480)
+		ov_write(c, 0x35, 0x9e);
+	else
+		ov_write(c, 0x35, 0x1e);
+
+	return 0;
+}
+
+static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int ret, hwscale, vwscale;
+
+	ret = ov76be_mode_init(c, win);
+	if (ret < 0)
+		return ret;
+
+	if (win->quarter) {
+		hwscale = 1;
+		vwscale = 0;
+	} else {
+		hwscale = 2;
+		vwscale = 1;
+	}
+
+	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+	return 0;
+}
+
+static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+	switch (cmd) {
+	case OVCAMCHIP_CMD_S_CTRL:
+		return ov76be_set_control(c, arg);
+	case OVCAMCHIP_CMD_G_CTRL:
+		return ov76be_get_control(c, arg);
+	case OVCAMCHIP_CMD_S_MODE:
+		return ov76be_set_window(c, arg);
+	default:
+		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+		return -ENOIOCTLCMD;
+	}
+}
+
+struct ovcamchip_ops ov76be_ops = {
+	.init    =	ov76be_init,
+	.free    =	ov76be_free,
+	.command =	ov76be_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov7x10.c b/drivers/media/video/ovcamchip/ov7x10.c
new file mode 100644
index 000000000000..6c383d4b14fa
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov7x10.c
@@ -0,0 +1,335 @@
+/* OmniVision OV7610/OV7110 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN		0x00	/* gain [5:0] */
+#define REG_BLUE		0x01	/* blue channel balance */
+#define REG_RED			0x02	/* red channel balance */
+#define REG_SAT			0x03	/* saturation */
+#define REG_CNT			0x05	/* Y contrast */
+#define REG_BRT			0x06	/* Y brightness */
+#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
+#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
+#define REG_GAMMA_COEFF		0x0E	/* gamma settings */
+#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
+#define REG_EXP			0x10	/* manual exposure setting */
+#define REG_CLOCK		0x11	/* polarity/clock prescaler */
+#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
+#define REG_HWIN_START		0x17	/* horizontal window start */
+#define REG_HWIN_END		0x18	/* horizontal window end */
+#define REG_VWIN_START		0x19	/* vertical window start */
+#define REG_VWIN_END		0x1A	/* vertical window end */
+#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
+#define REG_YOFFSET		0x21	/* Y channel offset */
+#define REG_UOFFSET		0x22	/* U channel offset */
+#define REG_ECW			0x24	/* exposure white level for AEC */
+#define REG_ECB			0x25	/* exposure black level for AEC */
+#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
+#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
+#define REG_ALC			0x2C	/* Auto Level Control settings */
+#define REG_VOFFSET		0x2E	/* V channel offset adjustment */
+#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
+#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
+#define REG_BIAS_ADJUST		0x34	/* misc bias settings */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3a
+#define VWSBASE 0x05
+#define VWEBASE 0x05
+
+struct ov7x10 {
+	int auto_brt;
+	int auto_exp;
+	int bandfilt;
+	int mirror;
+};
+
+/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+ *
+ * Register 0x0f in the 7610 has the following effects:
+ *
+ * 0x85 (AEC method 1): Best overall, good contrast range
+ * 0x45 (AEC method 2): Very overexposed
+ * 0xa5 (spec sheet default): Ok, but the black level is
+ *	shifted resulting in loss of contrast
+ * 0x05 (old driver setting): very overexposed, too much
+ *	contrast
+ */
+static struct ovcamchip_regvals regvals_init_7x10[] = {
+	{ 0x10, 0xff },
+	{ 0x16, 0x03 },
+	{ 0x28, 0x24 },
+	{ 0x2b, 0xac },
+	{ 0x12, 0x00 },
+	{ 0x38, 0x81 },
+	{ 0x28, 0x24 },	/* 0c */
+	{ 0x0f, 0x85 },	/* lg's setting */
+	{ 0x15, 0x01 },
+	{ 0x20, 0x1c },
+	{ 0x23, 0x2a },
+	{ 0x24, 0x10 },
+	{ 0x25, 0x8a },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xc2 },
+	{ 0x2a, 0x04 },
+	{ 0x2c, 0xfe },
+	{ 0x2d, 0x93 },
+	{ 0x30, 0x71 },
+	{ 0x31, 0x60 },
+	{ 0x32, 0x26 },
+	{ 0x33, 0x20 },
+	{ 0x34, 0x48 },
+	{ 0x12, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* This initializes the OV7x10 camera chip and relevant variables. */
+static int ov7x10_init(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov7x10 *s;
+	int rc;
+
+	DDEBUG(4, &c->dev, "entered");
+
+	rc = ov_write_regvals(c, regvals_init_7x10);
+	if (rc < 0)
+		return rc;
+
+	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+	memset(s, 0, sizeof *s);
+
+	s->auto_brt = 1;
+	s->auto_exp = 1;
+
+	return rc;
+}
+
+static int ov7x10_free(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+
+	kfree(ov->spriv);
+	return 0;
+}
+
+static int ov7x10_set_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov7x10 *s = ov->spriv;
+	int rc;
+	int v = ctl->value;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+		rc = ov_write(c, REG_CNT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_write(c, REG_BRT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_write(c, REG_SAT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_HUE:
+		rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, REG_BLUE, v >> 8);
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_write(c, REG_EXP, v);
+		break;
+	case OVCAMCHIP_CID_FREQ:
+	{
+		int sixty = (v == 60);
+
+		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x13, 0x10, 0x10);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x13, 0x00, 0x10);
+		break;
+	}
+	case OVCAMCHIP_CID_BANDFILT:
+		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+		s->bandfilt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+		s->auto_brt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		rc = ov_write_mask(c, 0x29, v?0x00:0x80, 0x80);
+		s->auto_exp = v;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+		s->mirror = v;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+out:
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+	return rc;
+}
+
+static int ov7x10_get_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov7x10 *s = ov->spriv;
+	int rc = 0;
+	unsigned char val = 0;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+		rc = ov_read(c, REG_CNT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_read(c, REG_BRT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_read(c, REG_SAT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_HUE:
+		rc = ov_read(c, REG_BLUE, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_read(c, REG_EXP, &val);
+		ctl->value = val;
+		break;
+	case OVCAMCHIP_CID_BANDFILT:
+		ctl->value = s->bandfilt;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		ctl->value = s->auto_brt;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		ctl->value = s->auto_exp;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		ctl->value = s->mirror;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+	return rc;
+}
+
+static int ov7x10_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int qvga = win->quarter;
+
+	/******** QVGA-specific regs ********/
+
+	ov_write(c, 0x14, qvga?0x24:0x04);
+
+	/******** Palette-specific regs ********/
+
+	if (win->format == VIDEO_PALETTE_GREY) {
+		ov_write_mask(c, 0x0e, 0x40, 0x40);
+		ov_write_mask(c, 0x13, 0x20, 0x20);
+	} else {
+		ov_write_mask(c, 0x0e, 0x00, 0x40);
+		ov_write_mask(c, 0x13, 0x00, 0x20);
+	}
+
+	/******** Clock programming ********/
+
+	ov_write(c, 0x11, win->clockdiv);
+
+	/******** Resolution-specific ********/
+
+	if (win->width == 640 && win->height == 480)
+		ov_write(c, 0x35, 0x9e);
+	else
+		ov_write(c, 0x35, 0x1e);
+
+	return 0;
+}
+
+static int ov7x10_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int ret, hwscale, vwscale;
+
+	ret = ov7x10_mode_init(c, win);
+	if (ret < 0)
+		return ret;
+
+	if (win->quarter) {
+		hwscale = 1;
+		vwscale = 0;
+	} else {
+		hwscale = 2;
+		vwscale = 1;
+	}
+
+	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+	return 0;
+}
+
+static int ov7x10_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+	switch (cmd) {
+	case OVCAMCHIP_CMD_S_CTRL:
+		return ov7x10_set_control(c, arg);
+	case OVCAMCHIP_CMD_G_CTRL:
+		return ov7x10_get_control(c, arg);
+	case OVCAMCHIP_CMD_S_MODE:
+		return ov7x10_set_window(c, arg);
+	default:
+		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+		return -ENOIOCTLCMD;
+	}
+}
+
+struct ovcamchip_ops ov7x10_ops = {
+	.init    =	ov7x10_init,
+	.free    =	ov7x10_free,
+	.command =	ov7x10_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c
new file mode 100644
index 000000000000..3c8c48f338ba
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov7x20.c
@@ -0,0 +1,455 @@
+/* OmniVision OV7620/OV7120 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN		0x00	/* gain [5:0] */
+#define REG_BLUE		0x01	/* blue gain */
+#define REG_RED			0x02	/* red gain */
+#define REG_SAT			0x03	/* saturation */
+#define REG_BRT			0x06	/* Y brightness */
+#define REG_SHARP		0x07	/* analog sharpness */
+#define REG_BLUE_BIAS		0x0C	/* WB blue ratio [5:0] */
+#define REG_RED_BIAS		0x0D	/* WB red ratio [5:0] */
+#define REG_EXP			0x10	/* exposure */
+
+/* Default control settings. Values are in terms of V4L2 controls. */
+#define OV7120_DFL_BRIGHT     0x60
+#define OV7620_DFL_BRIGHT     0x60
+#define OV7120_DFL_SAT        0xb0
+#define OV7620_DFL_SAT        0xc0
+#define DFL_AUTO_EXP             1
+#define DFL_AUTO_GAIN            1
+#define OV7120_DFL_GAIN       0x00
+#define OV7620_DFL_GAIN       0x00
+/* NOTE: Since autoexposure is the default, these aren't programmed into the
+ * OV7x20 chip. They are just here because V4L2 expects a default */
+#define OV7120_DFL_EXP        0x7f
+#define OV7620_DFL_EXP        0x7f
+
+/* Window parameters */
+#define HWSBASE 0x2F	/* From 7620.SET (spec is wrong) */
+#define HWEBASE 0x2F
+#define VWSBASE 0x05
+#define VWEBASE 0x05
+
+struct ov7x20 {
+	int auto_brt;
+	int auto_exp;
+	int auto_gain;
+	int backlight;
+	int bandfilt;
+	int mirror;
+};
+
+/* Contrast look-up table */
+static unsigned char ctab[] = {
+	0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
+	0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
+};
+
+/* Settings for (Black & White) OV7120 camera chip */
+static struct ovcamchip_regvals regvals_init_7120[] = {
+	{ 0x12, 0x80 }, /* reset */
+	{ 0x13, 0x00 }, /* Autoadjust off */
+	{ 0x12, 0x20 }, /* Disable AWB */
+	{ 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */
+	{ 0x00, OV7120_DFL_GAIN },
+	{ 0x01, 0x80 },
+	{ 0x02, 0x80 },
+	{ 0x03, OV7120_DFL_SAT },
+	{ 0x06, OV7120_DFL_BRIGHT },
+	{ 0x07, 0x00 },
+	{ 0x0c, 0x20 },
+	{ 0x0d, 0x20 },
+	{ 0x11, 0x01 },
+	{ 0x14, 0x84 },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x03 },
+	{ 0x17, 0x2f },
+	{ 0x18, 0xcf },
+	{ 0x19, 0x06 },
+	{ 0x1a, 0xf5 },
+	{ 0x1b, 0x00 },
+	{ 0x20, 0x08 },
+	{ 0x21, 0x80 },
+	{ 0x22, 0x80 },
+	{ 0x23, 0x00 },
+	{ 0x26, 0xa0 },
+	{ 0x27, 0xfa },
+	{ 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */
+	{ 0x29, DFL_AUTO_EXP?0x00:0x80 },
+	{ 0x2a, 0x10 },
+	{ 0x2b, 0x00 },
+	{ 0x2c, 0x88 },
+	{ 0x2d, 0x95 },
+	{ 0x2e, 0x80 },
+	{ 0x2f, 0x44 },
+	{ 0x60, 0x20 },
+	{ 0x61, 0x02 },
+	{ 0x62, 0x5f },
+	{ 0x63, 0xd5 },
+	{ 0x64, 0x57 },
+	{ 0x65, 0x83 }, /* OV says "don't change this value" */
+	{ 0x66, 0x55 },
+	{ 0x67, 0x92 },
+	{ 0x68, 0xcf },
+	{ 0x69, 0x76 },
+	{ 0x6a, 0x22 },
+	{ 0x6b, 0xe2 },
+	{ 0x6c, 0x40 },
+	{ 0x6d, 0x48 },
+	{ 0x6e, 0x80 },
+	{ 0x6f, 0x0d },
+	{ 0x70, 0x89 },
+	{ 0x71, 0x00 },
+	{ 0x72, 0x14 },
+	{ 0x73, 0x54 },
+	{ 0x74, 0xa0 },
+	{ 0x75, 0x8e },
+	{ 0x76, 0x00 },
+	{ 0x77, 0xff },
+	{ 0x78, 0x80 },
+	{ 0x79, 0x80 },
+	{ 0x7a, 0x80 },
+	{ 0x7b, 0xe6 },
+	{ 0x7c, 0x00 },
+	{ 0x24, 0x3a },
+	{ 0x25, 0x60 },
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* Settings for (color) OV7620 camera chip */
+static struct ovcamchip_regvals regvals_init_7620[] = {
+	{ 0x12, 0x80 }, /* reset */
+	{ 0x00, OV7620_DFL_GAIN },
+	{ 0x01, 0x80 },
+	{ 0x02, 0x80 },
+	{ 0x03, OV7620_DFL_SAT },
+	{ 0x06, OV7620_DFL_BRIGHT },
+	{ 0x07, 0x00 },
+	{ 0x0c, 0x24 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x12, 0x24 },
+	{ 0x13, DFL_AUTO_GAIN?0x01:0x00 },
+	{ 0x14, 0x84 },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x03 },
+	{ 0x17, 0x2f },
+	{ 0x18, 0xcf },
+	{ 0x19, 0x06 },
+	{ 0x1a, 0xf5 },
+	{ 0x1b, 0x00 },
+	{ 0x20, 0x18 },
+	{ 0x21, 0x80 },
+	{ 0x22, 0x80 },
+	{ 0x23, 0x00 },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xea },
+	{ 0x28, 0x20 },
+	{ 0x29, DFL_AUTO_EXP?0x00:0x80 },
+	{ 0x2a, 0x10 },
+	{ 0x2b, 0x00 },
+	{ 0x2c, 0x88 },
+	{ 0x2d, 0x91 },
+	{ 0x2e, 0x80 },
+	{ 0x2f, 0x44 },
+	{ 0x60, 0x27 },
+	{ 0x61, 0x02 },
+	{ 0x62, 0x5f },
+	{ 0x63, 0xd5 },
+	{ 0x64, 0x57 },
+	{ 0x65, 0x83 },
+	{ 0x66, 0x55 },
+	{ 0x67, 0x92 },
+	{ 0x68, 0xcf },
+	{ 0x69, 0x76 },
+	{ 0x6a, 0x22 },
+	{ 0x6b, 0x00 },
+	{ 0x6c, 0x02 },
+	{ 0x6d, 0x44 },
+	{ 0x6e, 0x80 },
+	{ 0x6f, 0x1d },
+	{ 0x70, 0x8b },
+	{ 0x71, 0x00 },
+	{ 0x72, 0x14 },
+	{ 0x73, 0x54 },
+	{ 0x74, 0x00 },
+	{ 0x75, 0x8e },
+	{ 0x76, 0x00 },
+	{ 0x77, 0xff },
+	{ 0x78, 0x80 },
+	{ 0x79, 0x80 },
+	{ 0x7a, 0x80 },
+	{ 0x7b, 0xe2 },
+	{ 0x7c, 0x00 },
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* Returns index into the specified look-up table, with 'n' elements, for which
+ * the value is greater than or equal to "val". If a match isn't found, (n-1)
+ * is returned. The entries in the table must be in ascending order. */
+static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val)
+{
+	int i = 0;
+
+	while (lut[i] < val && i < n)
+		i++;
+
+	return i;
+}
+
+/* This initializes the OV7x20 camera chip and relevant variables. */
+static int ov7x20_init(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov7x20 *s;
+	int rc;
+
+	DDEBUG(4, &c->dev, "entered");
+
+	if (ov->mono)
+		rc = ov_write_regvals(c, regvals_init_7120);
+	else
+		rc = ov_write_regvals(c, regvals_init_7620);
+
+	if (rc < 0)
+		return rc;
+
+	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+	memset(s, 0, sizeof *s);
+
+	s->auto_brt = 1;
+	s->auto_exp = DFL_AUTO_EXP;
+	s->auto_gain = DFL_AUTO_GAIN;
+
+	return 0;
+}
+
+static int ov7x20_free(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+
+	kfree(ov->spriv);
+	return 0;
+}
+
+static int ov7x20_set_v4l1_control(struct i2c_client *c,
+				   struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov7x20 *s = ov->spriv;
+	int rc;
+	int v = ctl->value;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+	{
+		/* Use Y gamma control instead. Bit 0 enables it. */
+		rc = ov_write(c, 0x64, ctab[v >> 12]);
+		break;
+	}
+	case OVCAMCHIP_CID_BRIGHT:
+		/* 7620 doesn't like manual changes when in auto mode */
+		if (!s->auto_brt)
+			rc = ov_write(c, REG_BRT, v >> 8);
+		else
+			rc = 0;
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_write(c, REG_SAT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_EXP:
+		if (!s->auto_exp)
+			rc = ov_write(c, REG_EXP, v);
+		else
+			rc = -EBUSY;
+		break;
+	case OVCAMCHIP_CID_FREQ:
+	{
+		int sixty = (v == 60);
+
+		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
+		break;
+	}
+	case OVCAMCHIP_CID_BANDFILT:
+		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+		s->bandfilt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+		s->auto_brt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
+		s->auto_exp = v;
+		break;
+	case OVCAMCHIP_CID_BACKLIGHT:
+	{
+		rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
+		s->backlight = v;
+		break;
+	}
+	case OVCAMCHIP_CID_MIRROR:
+		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+		s->mirror = v;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+out:
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+	return rc;
+}
+
+static int ov7x20_get_v4l1_control(struct i2c_client *c,
+				   struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov7x20 *s = ov->spriv;
+	int rc = 0;
+	unsigned char val = 0;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_CONT:
+		rc = ov_read(c, 0x64, &val);
+		ctl->value = ov7x20_lut_find(ctab, 16, val) << 12;
+		break;
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_read(c, REG_BRT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_read(c, REG_SAT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_read(c, REG_EXP, &val);
+		ctl->value = val;
+		break;
+	case OVCAMCHIP_CID_BANDFILT:
+		ctl->value = s->bandfilt;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		ctl->value = s->auto_brt;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		ctl->value = s->auto_exp;
+		break;
+	case OVCAMCHIP_CID_BACKLIGHT:
+		ctl->value = s->backlight;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		ctl->value = s->mirror;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+	return rc;
+}
+
+static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	int qvga = win->quarter;
+
+	/******** QVGA-specific regs ********/
+	ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20);
+	ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20);
+	ov_write(c, 0x24, qvga?0x20:0x3a);
+	ov_write(c, 0x25, qvga?0x30:0x60);
+	ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40);
+	if (!ov->mono)
+		ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0);
+	ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20);
+
+	/******** Clock programming ********/
+
+	ov_write(c, 0x11, win->clockdiv);
+
+	return 0;
+}
+
+static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int ret, hwscale, vwscale;
+
+	ret = ov7x20_mode_init(c, win);
+	if (ret < 0)
+		return ret;
+
+	if (win->quarter) {
+		hwscale = 1;
+		vwscale = 0;
+	} else {
+		hwscale = 2;
+		vwscale = 1;
+	}
+
+	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+	return 0;
+}
+
+static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+	switch (cmd) {
+	case OVCAMCHIP_CMD_S_CTRL:
+		return ov7x20_set_v4l1_control(c, arg);
+	case OVCAMCHIP_CMD_G_CTRL:
+		return ov7x20_get_v4l1_control(c, arg);
+	case OVCAMCHIP_CMD_S_MODE:
+		return ov7x20_set_window(c, arg);
+	default:
+		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+		return -ENOIOCTLCMD;
+	}
+}
+
+struct ovcamchip_ops ov7x20_ops = {
+	.init    =	ov7x20_init,
+	.free    =	ov7x20_free,
+	.command =	ov7x20_command,
+};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
new file mode 100644
index 000000000000..54dd5612d3b8
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ovcamchip_core.c
@@ -0,0 +1,444 @@
+/* Shared Code for OmniVision Camera Chip Drivers
+ *
+ * Copyright (c) 2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "ovcamchip_priv.h"
+
+#define DRIVER_VERSION "v2.27 for Linux 2.6"
+#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org>"
+#define DRIVER_DESC "OV camera chip I2C driver"
+
+#define PINFO(fmt, args...) printk(KERN_INFO "ovcamchip: " fmt "\n" , ## args);
+#define PERROR(fmt, args...) printk(KERN_ERR "ovcamchip: " fmt "\n" , ## args);
+
+#ifdef DEBUG
+int ovcamchip_debug = 0;
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug,
+  "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=all");
+#endif
+
+/* By default, let bridge driver tell us if chip is monochrome. mono=0
+ * will ignore that and always treat chips as color. mono=1 will force
+ * monochrome mode for all chips. */
+static int mono = -1;
+module_param(mono, int, 0);
+MODULE_PARM_DESC(mono,
+  "1=chips are monochrome (OVx1xx), 0=force color, -1=autodetect (default)");
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/* Registers common to all chips, that are needed for detection */
+#define GENERIC_REG_ID_HIGH       0x1C	/* manufacturer ID MSB */
+#define GENERIC_REG_ID_LOW        0x1D	/* manufacturer ID LSB */
+#define GENERIC_REG_COM_I         0x29	/* misc ID bits */
+
+extern struct ovcamchip_ops ov6x20_ops;
+extern struct ovcamchip_ops ov6x30_ops;
+extern struct ovcamchip_ops ov7x10_ops;
+extern struct ovcamchip_ops ov7x20_ops;
+extern struct ovcamchip_ops ov76be_ops;
+
+static char *chip_names[NUM_CC_TYPES] = {
+	[CC_UNKNOWN]	= "Unknown chip",
+	[CC_OV76BE]	= "OV76BE",
+	[CC_OV7610]	= "OV7610",
+	[CC_OV7620]	= "OV7620",
+	[CC_OV7620AE]	= "OV7620AE",
+	[CC_OV6620]	= "OV6620",
+	[CC_OV6630]	= "OV6630",
+	[CC_OV6630AE]	= "OV6630AE",
+	[CC_OV6630AF]	= "OV6630AF",
+};
+
+/* Forward declarations */
+static struct i2c_driver driver;
+static struct i2c_client client_template;
+
+/* ----------------------------------------------------------------------- */
+
+int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals)
+{
+	int rc;
+
+	while (rvals->reg != 0xff) {
+		rc = ov_write(c, rvals->reg, rvals->val);
+		if (rc < 0)
+			return rc;
+		rvals++;
+	}
+
+	return 0;
+}
+
+/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
+ * the same position as 1's in "mask" are cleared and set to "value". Bits
+ * that are in the same position as 0's in "mask" are preserved, regardless
+ * of their respective state in "value".
+ */
+int ov_write_mask(struct i2c_client *c,
+		  unsigned char reg,
+		  unsigned char value,
+		  unsigned char mask)
+{
+	int rc;
+	unsigned char oldval, newval;
+
+	if (mask == 0xff) {
+		newval = value;
+	} else {
+		rc = ov_read(c, reg, &oldval);
+		if (rc < 0)
+			return rc;
+
+		oldval &= (~mask);		/* Clear the masked bits */
+		value &= mask;			/* Enforce mask on value */
+		newval = oldval | value;	/* Set the desired bits */
+	}
+
+	return ov_write(c, reg, newval);
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Reset the chip and ensure that I2C is synchronized. Returns <0 if failure.
+ */
+static int init_camchip(struct i2c_client *c)
+{
+	int i, success;
+	unsigned char high, low;
+
+	/* Reset the chip */
+	ov_write(c, 0x12, 0x80);
+
+	/* Wait for it to initialize */
+	msleep(150);
+
+	for (i = 0, success = 0; i < I2C_DETECT_RETRIES && !success; i++) {
+		if (ov_read(c, GENERIC_REG_ID_HIGH, &high) >= 0) {
+			if (ov_read(c, GENERIC_REG_ID_LOW, &low) >= 0) {
+				if (high == 0x7F && low == 0xA2) {
+					success = 1;
+					continue;
+				}
+			}
+		}
+
+		/* Reset the chip */
+		ov_write(c, 0x12, 0x80);
+
+		/* Wait for it to initialize */
+		msleep(150);
+
+		/* Dummy read to sync I2C */
+		ov_read(c, 0x00, &low);
+	}
+
+	if (!success)
+		return -EIO;
+
+	PDEBUG(1, "I2C synced in %d attempt(s)", i);
+
+	return 0;
+}
+
+/* This detects the OV7610, OV7620, or OV76BE chip. */
+static int ov7xx0_detect(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	int rc;
+	unsigned char val;
+
+	PDEBUG(4, "");
+
+	/* Detect chip (sub)type */
+	rc = ov_read(c, GENERIC_REG_COM_I, &val);
+	if (rc < 0) {
+		PERROR("Error detecting ov7xx0 type");
+		return rc;
+	}
+
+	if ((val & 3) == 3) {
+		PINFO("Camera chip is an OV7610");
+		ov->subtype = CC_OV7610;
+	} else if ((val & 3) == 1) {
+		rc = ov_read(c, 0x15, &val);
+		if (rc < 0) {
+			PERROR("Error detecting ov7xx0 type");
+			return rc;
+		}
+
+		if (val & 1) {
+			PINFO("Camera chip is an OV7620AE");
+			/* OV7620 is a close enough match for now. There are
+			 * some definite differences though, so this should be
+			 * fixed */
+			ov->subtype = CC_OV7620;
+		} else {
+			PINFO("Camera chip is an OV76BE");
+			ov->subtype = CC_OV76BE;
+		}
+	} else if ((val & 3) == 0) {
+		PINFO("Camera chip is an OV7620");
+		ov->subtype = CC_OV7620;
+	} else {
+		PERROR("Unknown camera chip version: %d", val & 3);
+		return -ENOSYS;
+	}
+
+	if (ov->subtype == CC_OV76BE)
+		ov->sops = &ov76be_ops;
+	else if (ov->subtype == CC_OV7620)
+		ov->sops = &ov7x20_ops;
+	else
+		ov->sops = &ov7x10_ops;
+
+	return 0;
+}
+
+/* This detects the OV6620, OV6630, OV6630AE, or OV6630AF chip. */
+static int ov6xx0_detect(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	int rc;
+	unsigned char val;
+
+	PDEBUG(4, "");
+
+	/* Detect chip (sub)type */
+	rc = ov_read(c, GENERIC_REG_COM_I, &val);
+	if (rc < 0) {
+		PERROR("Error detecting ov6xx0 type");
+		return -1;
+	}
+
+	if ((val & 3) == 0) {
+		ov->subtype = CC_OV6630;
+		PINFO("Camera chip is an OV6630");
+	} else if ((val & 3) == 1) {
+		ov->subtype = CC_OV6620;
+		PINFO("Camera chip is an OV6620");
+	} else if ((val & 3) == 2) {
+		ov->subtype = CC_OV6630;
+		PINFO("Camera chip is an OV6630AE");
+	} else if ((val & 3) == 3) {
+		ov->subtype = CC_OV6630;
+		PINFO("Camera chip is an OV6630AF");
+	}
+
+	if (ov->subtype == CC_OV6620)
+		ov->sops = &ov6x20_ops;
+	else
+		ov->sops = &ov6x30_ops;
+
+	return 0;
+}
+
+static int ovcamchip_detect(struct i2c_client *c)
+{
+	/* Ideally we would just try a single register write and see if it NAKs.
+	 * That isn't possible since the OV518 can't report I2C transaction
+	 * failures. So, we have to try to initialize the chip (i.e. reset it
+	 * and check the ID registers) to detect its presence. */
+
+	/* Test for 7xx0 */
+	PDEBUG(3, "Testing for 0V7xx0");
+	c->addr = OV7xx0_SID;
+	if (init_camchip(c) < 0) {
+		/* Test for 6xx0 */
+		PDEBUG(3, "Testing for 0V6xx0");
+		c->addr = OV6xx0_SID;
+		if (init_camchip(c) < 0) {
+ 			return -ENODEV;
+		} else {
+			if (ov6xx0_detect(c) < 0) {
+				PERROR("Failed to init OV6xx0");
+ 				return -EIO;
+			}
+		}
+	} else {
+		if (ov7xx0_detect(c) < 0) {
+			PERROR("Failed to init OV7xx0");
+ 			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int ovcamchip_attach(struct i2c_adapter *adap)
+{
+	int rc = 0;
+	struct ovcamchip *ov;
+	struct i2c_client *c;
+
+	/* I2C is not a PnP bus, so we can never be certain that we're talking
+	 * to the right chip. To prevent damage to EEPROMS and such, only
+	 * attach to adapters that are known to contain OV camera chips. */
+
+	switch (adap->id) {
+	case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511):
+	case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518):
+	case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OVFX2):
+	case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_W9968CF):
+		PDEBUG(1, "Adapter ID 0x%06x accepted", adap->id);
+		break;
+	default:
+		PDEBUG(1, "Adapter ID 0x%06x rejected", adap->id);
+		return -ENODEV;
+	}
+
+	c = kmalloc(sizeof *c, GFP_KERNEL);
+	if (!c) {
+		rc = -ENOMEM;
+		goto no_client;
+	}
+	memcpy(c, &client_template, sizeof *c);
+	c->adapter = adap;
+	strcpy(i2c_clientname(c), "OV????");
+
+	ov = kmalloc(sizeof *ov, GFP_KERNEL);
+	if (!ov) {
+		rc = -ENOMEM;
+		goto no_ov;
+	}
+	memset(ov, 0, sizeof *ov);
+	i2c_set_clientdata(c, ov);
+
+	rc = ovcamchip_detect(c);
+	if (rc < 0)
+		goto error;
+
+	strcpy(i2c_clientname(c), chip_names[ov->subtype]);
+
+	PDEBUG(1, "Camera chip detection complete");
+
+	i2c_attach_client(c);
+
+	return rc;
+error:
+	kfree(ov);
+no_ov:
+	kfree(c);
+no_client:
+	PDEBUG(1, "returning %d", rc);
+	return rc;
+}
+
+static int ovcamchip_detach(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	int rc;
+
+	rc = ov->sops->free(c);
+	if (rc < 0)
+		return rc;
+
+	i2c_detach_client(c);
+
+	kfree(ov);
+	kfree(c);
+	return 0;
+}
+
+static int ovcamchip_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+
+	if (!ov->initialized &&
+	    cmd != OVCAMCHIP_CMD_Q_SUBTYPE &&
+	    cmd != OVCAMCHIP_CMD_INITIALIZE) {
+		dev_err(&c->dev, "ERROR: Camera chip not initialized yet!\n");
+		return -EPERM;
+	}
+
+	switch (cmd) {
+	case OVCAMCHIP_CMD_Q_SUBTYPE:
+	{
+		*(int *)arg = ov->subtype;
+		return 0;
+	}
+	case OVCAMCHIP_CMD_INITIALIZE:
+	{
+		int rc;
+
+		if (mono == -1)
+			ov->mono = *(int *)arg;
+		else
+			ov->mono = mono;
+
+		if (ov->mono) {
+			if (ov->subtype != CC_OV7620)
+				dev_warn(&c->dev, "Warning: Monochrome not "
+					"implemented for this chip\n");
+			else
+				dev_info(&c->dev, "Initializing chip as "
+					"monochrome\n");
+		}
+
+		rc = ov->sops->init(c);
+		if (rc < 0)
+			return rc;
+
+		ov->initialized = 1;
+		return 0;
+	}
+	default:
+		return ov->sops->command(c, cmd, arg);
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_driver driver = {
+	.owner =		THIS_MODULE,
+	.name =			"ovcamchip",
+	.id =			I2C_DRIVERID_OVCAMCHIP,
+	.class =		I2C_CLASS_CAM_DIGITAL,
+	.flags =		I2C_DF_NOTIFY,
+	.attach_adapter =	ovcamchip_attach,
+	.detach_client =	ovcamchip_detach,
+	.command =		ovcamchip_command,
+};
+
+static struct i2c_client client_template = {
+	I2C_DEVNAME("(unset)"),
+	.driver =	&driver,
+};
+
+static int __init ovcamchip_init(void)
+{
+#ifdef DEBUG
+	ovcamchip_debug = debug;
+#endif
+
+	PINFO(DRIVER_VERSION " : " DRIVER_DESC);
+	return i2c_add_driver(&driver);
+}
+
+static void __exit ovcamchip_exit(void)
+{
+	i2c_del_driver(&driver);
+}
+
+module_init(ovcamchip_init);
+module_exit(ovcamchip_exit);
diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h
new file mode 100644
index 000000000000..575e612a5546
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h
@@ -0,0 +1,87 @@
+/* OmniVision* camera chip driver private definitions for core code and
+ * chip-specific code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ *
+ * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
+ * is not sponsored or developed by them.
+ */
+
+#ifndef __LINUX_OVCAMCHIP_PRIV_H
+#define __LINUX_OVCAMCHIP_PRIV_H
+
+#include <media/ovcamchip.h>
+
+#ifdef DEBUG
+extern int ovcamchip_debug;
+#endif
+
+#define PDEBUG(level, fmt, args...) \
+	if (ovcamchip_debug >= (level))	pr_debug("[%s:%d] " fmt "\n", \
+		__FUNCTION__, __LINE__ , ## args)
+
+#define DDEBUG(level, dev, fmt, args...) \
+	if (ovcamchip_debug >= (level))	dev_dbg(dev, "[%s:%d] " fmt "\n", \
+		__FUNCTION__, __LINE__ , ## args)
+
+/* Number of times to retry chip detection. Increase this if you are getting
+ * "Failed to init camera chip" */
+#define I2C_DETECT_RETRIES	10
+
+struct ovcamchip_regvals {
+	unsigned char reg;
+	unsigned char val;
+};
+
+struct ovcamchip_ops {
+	int (*init)(struct i2c_client *);
+	int (*free)(struct i2c_client *);
+	int (*command)(struct i2c_client *, unsigned int, void *);
+};
+
+struct ovcamchip {
+	struct ovcamchip_ops *sops;
+	void *spriv;               /* Private data for OV7x10.c etc... */
+	int subtype;               /* = SEN_OV7610 etc... */
+	int mono;                  /* Monochrome chip? (invalid until init) */
+	int initialized;           /* OVCAMCHIP_CMD_INITIALIZE was successful */
+};
+
+/* --------------------------------- */
+/*              I2C I/O              */
+/* --------------------------------- */
+
+static inline int ov_read(struct i2c_client *c, unsigned char reg,
+			  unsigned char *value)
+{
+	int rc;
+
+	rc = i2c_smbus_read_byte_data(c, reg);
+	*value = (unsigned char) rc;
+	return rc;
+}
+
+static inline int ov_write(struct i2c_client *c, unsigned char reg,
+			   unsigned char value )
+{
+	return i2c_smbus_write_byte_data(c, reg, value);
+}
+
+/* --------------------------------- */
+/*        FUNCTION PROTOTYPES        */
+/* --------------------------------- */
+
+/* Functions in ovcamchip_core.c */
+
+extern int ov_write_regvals(struct i2c_client *c,
+			    struct ovcamchip_regvals *rvals);
+
+extern int ov_write_mask(struct i2c_client *c, unsigned char reg,
+	      		 unsigned char value, unsigned char mask);
+
+#endif