media: move dvb kAPI headers to include/media

Except for DVB, all media kAPI headers are at include/media.

Move the headers to it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

20 files changed, 14 insertions, 3466 deletions

diff --git a/drivers/media/dvb-core/demux.h b/drivers/media/dvb-core/demux.h
deleted file mode 100644
index c4df6cee48e6..000000000000
--- a/drivers/media/dvb-core/demux.h
+++ /dev/null
@@ -1,589 +0,0 @@
-/*
- * demux.h
- *
- * The Kernel Digital TV Demux kABI defines a driver-internal interface for
- * registering low-level, hardware specific driver to a hardware independent
- * demux layer.
- *
- * Copyright (c) 2002 Convergence GmbH
- *
- * based on code:
- * Copyright (c) 2000 Nokia Research Center
- *                    Tampere, FINLAND
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __DEMUX_H
-#define __DEMUX_H
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/time.h>
-#include <linux/dvb/dmx.h>
-
-/*
- * Common definitions
- */
-
-/*
- * DMX_MAX_FILTER_SIZE: Maximum length (in bytes) of a section/PES filter.
- */
-
-#ifndef DMX_MAX_FILTER_SIZE
-#define DMX_MAX_FILTER_SIZE 18
-#endif
-
-/*
- * DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed
- * filter.
- */
-
-#ifndef DMX_MAX_SECTION_SIZE
-#define DMX_MAX_SECTION_SIZE 4096
-#endif
-#ifndef DMX_MAX_SECFEED_SIZE
-#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188)
-#endif
-
-/*
- * TS packet reception
- */
-
-/**
- * enum ts_filter_type - filter type bitmap for dmx_ts_feed.set\(\)
- *
- * @TS_PACKET:		Send TS packets (188 bytes) to callback (default).
- * @TS_PAYLOAD_ONLY:	In case TS_PACKET is set, only send the TS payload
- *			(<=184 bytes per packet) to callback
- * @TS_DECODER:		Send stream to built-in decoder (if present).
- * @TS_DEMUX:		In case TS_PACKET is set, send the TS to the demux
- *			device, not to the dvr device
- */
-enum ts_filter_type {
-	TS_PACKET = 1,
-	TS_PAYLOAD_ONLY = 2,
-	TS_DECODER = 4,
-	TS_DEMUX = 8,
-};
-
-/**
- * struct dmx_ts_feed - Structure that contains a TS feed filter
- *
- * @is_filtering:	Set to non-zero when filtering in progress
- * @parent:		pointer to struct dmx_demux
- * @priv:		pointer to private data of the API client
- * @set:		sets the TS filter
- * @start_filtering:	starts TS filtering
- * @stop_filtering:	stops TS filtering
- *
- * A TS feed is typically mapped to a hardware PID filter on the demux chip.
- * Using this API, the client can set the filtering properties to start/stop
- * filtering TS packets on a particular TS feed.
- */
-struct dmx_ts_feed {
-	int is_filtering;
-	struct dmx_demux *parent;
-	void *priv;
-	int (*set)(struct dmx_ts_feed *feed,
-		   u16 pid,
-		   int type,
-		   enum dmx_ts_pes pes_type,
-		   ktime_t timeout);
-	int (*start_filtering)(struct dmx_ts_feed *feed);
-	int (*stop_filtering)(struct dmx_ts_feed *feed);
-};
-
-/*
- * Section reception
- */
-
-/**
- * struct dmx_section_filter - Structure that describes a section filter
- *
- * @filter_value: Contains up to 16 bytes (128 bits) of the TS section header
- *		  that will be matched by the section filter
- * @filter_mask:  Contains a 16 bytes (128 bits) filter mask with the bits
- *		  specified by @filter_value that will be used on the filter
- *		  match logic.
- * @filter_mode:  Contains a 16 bytes (128 bits) filter mode.
- * @parent:	  Pointer to struct dmx_section_feed.
- * @priv:	  Pointer to private data of the API client.
- *
- *
- * The @filter_mask controls which bits of @filter_value are compared with
- * the section headers/payload. On a binary value of 1 in filter_mask, the
- * corresponding bits are compared. The filter only accepts sections that are
- * equal to filter_value in all the tested bit positions.
- */
-struct dmx_section_filter {
-	u8 filter_value[DMX_MAX_FILTER_SIZE];
-	u8 filter_mask[DMX_MAX_FILTER_SIZE];
-	u8 filter_mode[DMX_MAX_FILTER_SIZE];
-	struct dmx_section_feed *parent; /* Back-pointer */
-	void *priv; /* Pointer to private data of the API client */
-};
-
-/**
- * struct dmx_section_feed - Structure that contains a section feed filter
- *
- * @is_filtering:	Set to non-zero when filtering in progress
- * @parent:		pointer to struct dmx_demux
- * @priv:		pointer to private data of the API client
- * @check_crc:		If non-zero, check the CRC values of filtered sections.
- * @set:		sets the section filter
- * @allocate_filter:	This function is used to allocate a section filter on
- *			the demux. It should only be called when no filtering
- *			is in progress on this section feed. If a filter cannot
- *			be allocated, the function fails with -ENOSPC.
- * @release_filter:	This function releases all the resources of a
- *			previously allocated section filter. The function
- *			should not be called while filtering is in progress
- *			on this section feed. After calling this function,
- *			the caller should not try to dereference the filter
- *			pointer.
- * @start_filtering:	starts section filtering
- * @stop_filtering:	stops section filtering
- *
- * A TS feed is typically mapped to a hardware PID filter on the demux chip.
- * Using this API, the client can set the filtering properties to start/stop
- * filtering TS packets on a particular TS feed.
- */
-struct dmx_section_feed {
-	int is_filtering;
-	struct dmx_demux *parent;
-	void *priv;
-
-	int check_crc;
-
-	/* private: Used internally at dvb_demux.c */
-	u32 crc_val;
-
-	u8 *secbuf;
-	u8 secbuf_base[DMX_MAX_SECFEED_SIZE];
-	u16 secbufp, seclen, tsfeedp;
-
-	/* public: */
-	int (*set)(struct dmx_section_feed *feed,
-		   u16 pid,
-		   int check_crc);
-	int (*allocate_filter)(struct dmx_section_feed *feed,
-			       struct dmx_section_filter **filter);
-	int (*release_filter)(struct dmx_section_feed *feed,
-			      struct dmx_section_filter *filter);
-	int (*start_filtering)(struct dmx_section_feed *feed);
-	int (*stop_filtering)(struct dmx_section_feed *feed);
-};
-
-/**
- * typedef dmx_ts_cb - DVB demux TS filter callback function prototype
- *
- * @buffer1:		Pointer to the start of the filtered TS packets.
- * @buffer1_length:	Length of the TS data in buffer1.
- * @buffer2:		Pointer to the tail of the filtered TS packets, or NULL.
- * @buffer2_length:	Length of the TS data in buffer2.
- * @source:		Indicates which TS feed is the source of the callback.
- *
- * This function callback prototype, provided by the client of the demux API,
- * is called from the demux code. The function is only called when filtering
- * on a TS feed has been enabled using the start_filtering\(\) function at
- * the &dmx_demux.
- * Any TS packets that match the filter settings are copied to a circular
- * buffer. The filtered TS packets are delivered to the client using this
- * callback function.
- * It is expected that the @buffer1 and @buffer2 callback parameters point to
- * addresses within the circular buffer, but other implementations are also
- * possible. Note that the called party should not try to free the memory
- * the @buffer1 and @buffer2 parameters point to.
- *
- * When this function is called, the @buffer1 parameter typically points to
- * the start of the first undelivered TS packet within a circular buffer.
- * The @buffer2 buffer parameter is normally NULL, except when the received
- * TS packets have crossed the last address of the circular buffer and
- * "wrapped" to the beginning of the buffer. In the latter case the @buffer1
- * parameter would contain an address within the circular buffer, while the
- * @buffer2 parameter would contain the first address of the circular buffer.
- * The number of bytes delivered with this function (i.e. @buffer1_length +
- * @buffer2_length) is usually equal to the value of callback_length parameter
- * given in the set() function, with one exception: if a timeout occurs before
- * receiving callback_length bytes of TS data, any undelivered packets are
- * immediately delivered to the client by calling this function. The timeout
- * duration is controlled by the set() function in the TS Feed API.
- *
- * If a TS packet is received with errors that could not be fixed by the
- * TS-level forward error correction (FEC), the Transport_error_indicator
- * flag of the TS packet header should be set. The TS packet should not be
- * discarded, as the error can possibly be corrected by a higher layer
- * protocol. If the called party is slow in processing the callback, it
- * is possible that the circular buffer eventually fills up. If this happens,
- * the demux driver should discard any TS packets received while the buffer
- * is full and return -EOVERFLOW.
- *
- * The type of data returned to the callback can be selected by the
- * &dmx_ts_feed.@set function. The type parameter decides if the raw
- * TS packet (TS_PACKET) or just the payload (TS_PACKET|TS_PAYLOAD_ONLY)
- * should be returned. If additionally the TS_DECODER bit is set the stream
- * will also be sent to the hardware MPEG decoder.
- *
- * Return:
- *
- * - 0, on success;
- *
- * - -EOVERFLOW, on buffer overflow.
- */
-typedef int (*dmx_ts_cb)(const u8 *buffer1,
-			 size_t buffer1_length,
-			 const u8 *buffer2,
-			 size_t buffer2_length,
-			 struct dmx_ts_feed *source);
-
-/**
- * typedef dmx_section_cb - DVB demux TS filter callback function prototype
- *
- * @buffer1:		Pointer to the start of the filtered section, e.g.
- *			within the circular buffer of the demux driver.
- * @buffer1_len:	Length of the filtered section data in @buffer1,
- *			including headers and CRC.
- * @buffer2:		Pointer to the tail of the filtered section data,
- *			or NULL. Useful to handle the wrapping of a
- *			circular buffer.
- * @buffer2_len:	Length of the filtered section data in @buffer2,
- *			including headers and CRC.
- * @source:		Indicates which section feed is the source of the
- *			callback.
- *
- * This function callback prototype, provided by the client of the demux API,
- * is called from the demux code. The function is only called when
- * filtering of sections has been enabled using the function
- * &dmx_ts_feed.@start_filtering. When the demux driver has received a
- * complete section that matches at least one section filter, the client
- * is notified via this callback function. Normally this function is called
- * for each received section; however, it is also possible to deliver
- * multiple sections with one callback, for example when the system load
- * is high. If an error occurs while receiving a section, this
- * function should be called with the corresponding error type set in the
- * success field, whether or not there is data to deliver. The Section Feed
- * implementation should maintain a circular buffer for received sections.
- * However, this is not necessary if the Section Feed API is implemented as
- * a client of the TS Feed API, because the TS Feed implementation then
- * buffers the received data. The size of the circular buffer can be
- * configured using the &dmx_ts_feed.@set function in the Section Feed API.
- * If there is no room in the circular buffer when a new section is received,
- * the section must be discarded. If this happens, the value of the success
- * parameter should be DMX_OVERRUN_ERROR on the next callback.
- */
-typedef int (*dmx_section_cb)(const u8 *buffer1,
-			      size_t buffer1_len,
-			      const u8 *buffer2,
-			      size_t buffer2_len,
-			      struct dmx_section_filter *source);
-
-/*
- * DVB Front-End
- */
-
-/**
- * enum dmx_frontend_source - Used to identify the type of frontend
- *
- * @DMX_MEMORY_FE:	The source of the demux is memory. It means that
- *			the MPEG-TS to be filtered comes from userspace,
- *			via write() syscall.
- *
- * @DMX_FRONTEND_0:	The source of the demux is a frontend connected
- *			to the demux.
- */
-enum dmx_frontend_source {
-	DMX_MEMORY_FE,
-	DMX_FRONTEND_0,
-};
-
-/**
- * struct dmx_frontend - Structure that lists the frontends associated with
- *			 a demux
- *
- * @connectivity_list:	List of front-ends that can be connected to a
- *			particular demux;
- * @source:		Type of the frontend.
- *
- * FIXME: this structure should likely be replaced soon by some
- *	media-controller based logic.
- */
-struct dmx_frontend {
-	struct list_head connectivity_list;
-	enum dmx_frontend_source source;
-};
-
-/*
- * MPEG-2 TS Demux
- */
-
-/**
- * enum dmx_demux_caps - MPEG-2 TS Demux capabilities bitmap
- *
- * @DMX_TS_FILTERING:		set if TS filtering is supported;
- * @DMX_SECTION_FILTERING:	set if section filtering is supported;
- * @DMX_MEMORY_BASED_FILTERING:	set if write() available.
- *
- * Those flags are OR'ed in the &dmx_demux.capabilities field
- */
-enum dmx_demux_caps {
-	DMX_TS_FILTERING = 1,
-	DMX_SECTION_FILTERING = 4,
-	DMX_MEMORY_BASED_FILTERING = 8,
-};
-
-/*
- * Demux resource type identifier.
- */
-
-/**
- * DMX_FE_ENTRY - Casts elements in the list of registered
- *		  front-ends from the generic type struct list_head
- *		  to the type * struct dmx_frontend
- *
- * @list: list of struct dmx_frontend
- */
-#define DMX_FE_ENTRY(list) \
-	list_entry(list, struct dmx_frontend, connectivity_list)
-
-/**
- * struct dmx_demux - Structure that contains the demux capabilities and
- *		      callbacks.
- *
- * @capabilities: Bitfield of capability flags.
- *
- * @frontend: Front-end connected to the demux
- *
- * @priv: Pointer to private data of the API client
- *
- * @open: This function reserves the demux for use by the caller and, if
- *	necessary, initializes the demux. When the demux is no longer needed,
- *	the function @close should be called. It should be possible for
- *	multiple clients to access the demux at the same time. Thus, the
- *	function implementation should increment the demux usage count when
- *	@open is called and decrement it when @close is called.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-EUSERS, if maximum usage count was reached;
- *	-EINVAL, on bad parameter.
- *
- * @close: This function reserves the demux for use by the caller and, if
- *	necessary, initializes the demux. When the demux is no longer needed,
- *	the function @close should be called. It should be possible for
- *	multiple clients to access the demux at the same time. Thus, the
- *	function implementation should increment the demux usage count when
- *	@open is called and decrement it when @close is called.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-ENODEV, if demux was not in use (e. g. no users);
- *	-EINVAL, on bad parameter.
- *
- * @write: This function provides the demux driver with a memory buffer
- *	containing TS packets. Instead of receiving TS packets from the DVB
- *	front-end, the demux driver software will read packets from memory.
- *	Any clients of this demux with active TS, PES or Section filters will
- *	receive filtered data via the Demux callback API (see 0). The function
- *	returns when all the data in the buffer has been consumed by the demux.
- *	Demux hardware typically cannot read TS from memory. If this is the
- *	case, memory-based filtering has to be implemented entirely in software.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @buf function parameter contains a pointer to the TS data in
- *	kernel-space memory.
- *	The @count function parameter contains the length of the TS data.
- *	It returns:
- *	0 on success;
- *	-ERESTARTSYS, if mutex lock was interrupted;
- *	-EINTR, if a signal handling is pending;
- *	-ENODEV, if demux was removed;
- *	-EINVAL, on bad parameter.
- *
- * @allocate_ts_feed: Allocates a new TS feed, which is used to filter the TS
- *	packets carrying a certain PID. The TS feed normally corresponds to a
- *	hardware PID filter on the demux chip.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @feed function parameter contains a pointer to the TS feed API and
- *	instance data.
- *	The @callback function parameter contains a pointer to the callback
- *	function for passing received TS packet.
- *	It returns:
- *	0 on success;
- *	-ERESTARTSYS, if mutex lock was interrupted;
- *	-EBUSY, if no more TS feeds is available;
- *	-EINVAL, on bad parameter.
- *
- * @release_ts_feed: Releases the resources allocated with @allocate_ts_feed.
- *	Any filtering in progress on the TS feed should be stopped before
- *	calling this function.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @feed function parameter contains a pointer to the TS feed API and
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-EINVAL on bad parameter.
- *
- * @allocate_section_feed: Allocates a new section feed, i.e. a demux resource
- *	for filtering and receiving sections. On platforms with hardware
- *	support for section filtering, a section feed is directly mapped to
- *	the demux HW. On other platforms, TS packets are first PID filtered in
- *	hardware and a hardware section filter then emulated in software. The
- *	caller obtains an API pointer of type dmx_section_feed_t as an out
- *	parameter. Using this API the caller can set filtering parameters and
- *	start receiving sections.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @feed function parameter contains a pointer to the TS feed API and
- *	instance data.
- *	The @callback function parameter contains a pointer to the callback
- *	function for passing received TS packet.
- *	It returns:
- *	0 on success;
- *	-EBUSY, if no more TS feeds is available;
- *	-EINVAL, on bad parameter.
- *
- * @release_section_feed: Releases the resources allocated with
- *	@allocate_section_feed, including allocated filters. Any filtering in
- *	progress on the section feed should be stopped before calling this
- *	function.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @feed function parameter contains a pointer to the TS feed API and
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-EINVAL, on bad parameter.
- *
- * @add_frontend: Registers a connectivity between a demux and a front-end,
- *	i.e., indicates that the demux can be connected via a call to
- *	@connect_frontend to use the given front-end as a TS source. The
- *	client of this function has to allocate dynamic or static memory for
- *	the frontend structure and initialize its fields before calling this
- *	function. This function is normally called during the driver
- *	initialization. The caller must not free the memory of the frontend
- *	struct before successfully calling @remove_frontend.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @frontend function parameter contains a pointer to the front-end
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-EINVAL, on bad parameter.
- *
- * @remove_frontend: Indicates that the given front-end, registered by a call
- *	to @add_frontend, can no longer be connected as a TS source by this
- *	demux. The function should be called when a front-end driver or a demux
- *	driver is removed from the system. If the front-end is in use, the
- *	function fails with the return value of -EBUSY. After successfully
- *	calling this function, the caller can free the memory of the frontend
- *	struct if it was dynamically allocated before the @add_frontend
- *	operation.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @frontend function parameter contains a pointer to the front-end
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-ENODEV, if the front-end was not found,
- *	-EINVAL, on bad parameter.
- *
- * @get_frontends: Provides the APIs of the front-ends that have been
- *	registered for this demux. Any of the front-ends obtained with this
- *	call can be used as a parameter for @connect_frontend. The include
- *	file demux.h contains the macro DMX_FE_ENTRY() for converting an
- *	element of the generic type struct &list_head * to the type
- *	struct &dmx_frontend *. The caller must not free the memory of any of
- *	the elements obtained via this function call.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	It returns a struct list_head pointer to the list of front-end
- *	interfaces, or NULL in the case of an empty list.
- *
- * @connect_frontend: Connects the TS output of the front-end to the input of
- *	the demux. A demux can only be connected to a front-end registered to
- *	the demux with the function @add_frontend. It may or may not be
- *	possible to connect multiple demuxes to the same front-end, depending
- *	on the capabilities of the HW platform. When not used, the front-end
- *	should be released by calling @disconnect_frontend.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @frontend function parameter contains a pointer to the front-end
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-EINVAL, on bad parameter.
- *
- * @disconnect_frontend: Disconnects the demux and a front-end previously
- *	connected by a @connect_frontend call.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	It returns:
- *	0 on success;
- *	-EINVAL on bad parameter.
- *
- * @get_pes_pids: Get the PIDs for DMX_PES_AUDIO0, DMX_PES_VIDEO0,
- *	DMX_PES_TELETEXT0, DMX_PES_SUBTITLE0 and DMX_PES_PCR0.
- *	The @demux function parameter contains a pointer to the demux API and
- *	instance data.
- *	The @pids function parameter contains an array with five u16 elements
- *	where the PIDs will be stored.
- *	It returns:
- *	0 on success;
- *	-EINVAL on bad parameter.
- */
-struct dmx_demux {
-	enum dmx_demux_caps capabilities;
-	struct dmx_frontend *frontend;
-	void *priv;
-	int (*open)(struct dmx_demux *demux);
-	int (*close)(struct dmx_demux *demux);
-	int (*write)(struct dmx_demux *demux, const char __user *buf,
-		     size_t count);
-	int (*allocate_ts_feed)(struct dmx_demux *demux,
-				struct dmx_ts_feed **feed,
-				dmx_ts_cb callback);
-	int (*release_ts_feed)(struct dmx_demux *demux,
-			       struct dmx_ts_feed *feed);
-	int (*allocate_section_feed)(struct dmx_demux *demux,
-				     struct dmx_section_feed **feed,
-				     dmx_section_cb callback);
-	int (*release_section_feed)(struct dmx_demux *demux,
-				    struct dmx_section_feed *feed);
-	int (*add_frontend)(struct dmx_demux *demux,
-			    struct dmx_frontend *frontend);
-	int (*remove_frontend)(struct dmx_demux *demux,
-			       struct dmx_frontend *frontend);
-	struct list_head *(*get_frontends)(struct dmx_demux *demux);
-	int (*connect_frontend)(struct dmx_demux *demux,
-				struct dmx_frontend *frontend);
-	int (*disconnect_frontend)(struct dmx_demux *demux);
-
-	int (*get_pes_pids)(struct dmx_demux *demux, u16 *pids);
-
-	/* private: */
-
-	/*
-	 * Only used at av7110, to read some data from firmware.
-	 * As this was never documented, we have no clue about what's
-	 * there, and its usage on other drivers aren't encouraged.
-	 */
-	int (*get_stc)(struct dmx_demux *demux, unsigned int num,
-		       u64 *stc, unsigned int *base);
-};
-
-#endif /* #ifndef __DEMUX_H */
diff --git a/drivers/media/dvb-core/dmxdev.c b/drivers/media/dvb-core/dmxdev.c
index 1308c11f0e5b..5eada88414d1 100644
--- a/drivers/media/dvb-core/dmxdev.c
+++ b/drivers/media/dvb-core/dmxdev.c
@@ -27,8 +27,8 @@
 #include <linux/ioctl.h>
 #include <linux/wait.h>
 #include <linux/uaccess.h>
-#include "dmxdev.h"
-#include "dvb_vb2.h"
+#include <media/dmxdev.h>
+#include <media/dvb_vb2.h>
 
 static int debug;
 
diff --git a/drivers/media/dvb-core/dmxdev.h b/drivers/media/dvb-core/dmxdev.h
deleted file mode 100644
index a77064d6e2c4..000000000000
--- a/drivers/media/dvb-core/dmxdev.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * dmxdev.h
- *
- * Copyright (C) 2000 Ralph Metzler & Marcus Metzler
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _DMXDEV_H_
-#define _DMXDEV_H_
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <linux/dvb/dmx.h>
-
-#include "dvbdev.h"
-#include "demux.h"
-#include "dvb_ringbuffer.h"
-#include "dvb_vb2.h"
-
-/**
- * enum dmxdev_type - type of demux filter type.
- *
- * @DMXDEV_TYPE_NONE:	no filter set.
- * @DMXDEV_TYPE_SEC:	section filter.
- * @DMXDEV_TYPE_PES:	Program Elementary Stream (PES) filter.
- */
-enum dmxdev_type {
-	DMXDEV_TYPE_NONE,
-	DMXDEV_TYPE_SEC,
-	DMXDEV_TYPE_PES,
-};
-
-/**
- * enum dmxdev_state - state machine for the dmxdev.
- *
- * @DMXDEV_STATE_FREE:		indicates that the filter is freed.
- * @DMXDEV_STATE_ALLOCATED:	indicates that the filter was allocated
- *				to be used.
- * @DMXDEV_STATE_SET:		indicates that the filter parameters are set.
- * @DMXDEV_STATE_GO:		indicates that the filter is running.
- * @DMXDEV_STATE_DONE:		indicates that a packet was already filtered
- *				and the filter is now disabled.
- *				Set only if %DMX_ONESHOT. See
- *				&dmx_sct_filter_params.
- * @DMXDEV_STATE_TIMEDOUT:	Indicates a timeout condition.
- */
-enum dmxdev_state {
-	DMXDEV_STATE_FREE,
-	DMXDEV_STATE_ALLOCATED,
-	DMXDEV_STATE_SET,
-	DMXDEV_STATE_GO,
-	DMXDEV_STATE_DONE,
-	DMXDEV_STATE_TIMEDOUT
-};
-
-/**
- * struct dmxdev_feed - digital TV dmxdev feed
- *
- * @pid:	Program ID to be filtered
- * @ts:		pointer to &struct dmx_ts_feed
- * @next:	&struct list_head pointing to the next feed.
- */
-
-struct dmxdev_feed {
-	u16 pid;
-	struct dmx_ts_feed *ts;
-	struct list_head next;
-};
-
-/**
- * struct dmxdev_filter - digital TV dmxdev filter
- *
- * @filter:	a union describing a dmxdev filter.
- *		Currently used only for section filters.
- * @filter.sec: a &struct dmx_section_filter pointer.
- *		For section filter only.
- * @feed:	a union describing a dmxdev feed.
- *		Depending on the filter type, it can be either
- *		@feed.ts or @feed.sec.
- * @feed.ts:	a &struct list_head list.
- *		For TS and PES feeds.
- * @feed.sec:	a &struct dmx_section_feed pointer.
- *		For section feed only.
- * @params:	a union describing dmxdev filter parameters.
- *		Depending on the filter type, it can be either
- *		@params.sec or @params.pes.
- * @params.sec:	a &struct dmx_sct_filter_params embedded struct.
- *		For section filter only.
- * @params.pes:	a &struct dmx_pes_filter_params embedded struct.
- *		For PES filter only.
- * @type:	type of the dmxdev filter, as defined by &enum dmxdev_type.
- * @state:	state of the dmxdev filter, as defined by &enum dmxdev_state.
- * @dev:	pointer to &struct dmxdev.
- * @buffer:	an embedded &struct dvb_ringbuffer buffer.
- * @mutex:	protects the access to &struct dmxdev_filter.
- * @timer:	&struct timer_list embedded timer, used to check for
- *		feed timeouts.
- *		Only for section filter.
- * @todo:	index for the @secheader.
- *		Only for section filter.
- * @secheader:	buffer cache to parse the section header.
- *		Only for section filter.
- */
-struct dmxdev_filter {
-	union {
-		struct dmx_section_filter *sec;
-	} filter;
-
-	union {
-		/* list of TS and PES feeds (struct dmxdev_feed) */
-		struct list_head ts;
-		struct dmx_section_feed *sec;
-	} feed;
-
-	union {
-		struct dmx_sct_filter_params sec;
-		struct dmx_pes_filter_params pes;
-	} params;
-
-	enum dmxdev_type type;
-	enum dmxdev_state state;
-	struct dmxdev *dev;
-	struct dvb_ringbuffer buffer;
-	struct dvb_vb2_ctx vb2_ctx;
-
-	struct mutex mutex;
-
-	/* only for sections */
-	struct timer_list timer;
-	int todo;
-	u8 secheader[3];
-};
-
-/**
- * struct dmxdev - Describes a digital TV demux device.
- *
- * @dvbdev:		pointer to &struct dvb_device associated with
- *			the demux device node.
- * @dvr_dvbdev:		pointer to &struct dvb_device associated with
- *			the dvr device node.
- * @filter:		pointer to &struct dmxdev_filter.
- * @demux:		pointer to &struct dmx_demux.
- * @filternum:		number of filters.
- * @capabilities:	demux capabilities as defined by &enum dmx_demux_caps.
- * @exit:		flag to indicate that the demux is being released.
- * @dvr_orig_fe:	pointer to &struct dmx_frontend.
- * @dvr_buffer:		embedded &struct dvb_ringbuffer for DVB output.
- * @mutex:		protects the usage of this structure.
- * @lock:		protects access to &dmxdev->filter->data.
- */
-struct dmxdev {
-	struct dvb_device *dvbdev;
-	struct dvb_device *dvr_dvbdev;
-
-	struct dmxdev_filter *filter;
-	struct dmx_demux *demux;
-
-	int filternum;
-	int capabilities;
-
-	unsigned int exit:1;
-#define DMXDEV_CAP_DUPLEX 1
-	struct dmx_frontend *dvr_orig_fe;
-
-	struct dvb_ringbuffer dvr_buffer;
-#define DVR_BUFFER_SIZE (10*188*1024)
-
-	struct dvb_vb2_ctx dvr_vb2_ctx;
-
-	struct mutex mutex;
-	spinlock_t lock;
-};
-
-/**
- * dvb_dmxdev_init - initializes a digital TV demux and registers both demux
- *	and DVR devices.
- *
- * @dmxdev: pointer to &struct dmxdev.
- * @adap: pointer to &struct dvb_adapter.
- */
-int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *adap);
-
-/**
- * dvb_dmxdev_release - releases a digital TV demux and unregisters it.
- *
- * @dmxdev: pointer to &struct dmxdev.
- */
-void dvb_dmxdev_release(struct dmxdev *dmxdev);
-
-#endif /* _DMXDEV_H_ */
diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
deleted file mode 100644
index 28e2be5c8a98..000000000000
--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ /dev/null
@@ -1,424 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* dvb-usb-ids.h is part of the DVB USB library.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de) see
- * dvb-usb-init.c for copyright information.
- *
- * a header file containing define's for the USB device supported by the
- * various drivers.
- */
-#ifndef _DVB_USB_IDS_H_
-#define _DVB_USB_IDS_H_
-
-/* Vendor IDs */
-#define USB_VID_ADSTECH				0x06e1
-#define USB_VID_AFATECH				0x15a4
-#define USB_VID_ALCOR_MICRO			0x058f
-#define USB_VID_ALINK				0x05e3
-#define USB_VID_AMT				0x1c73
-#define USB_VID_ANCHOR				0x0547
-#define USB_VID_ANSONIC				0x10b9
-#define USB_VID_ANUBIS_ELECTRONIC		0x10fd
-#define USB_VID_ASUS				0x0b05
-#define USB_VID_AVERMEDIA			0x07ca
-#define USB_VID_COMPRO				0x185b
-#define USB_VID_COMPRO_UNK			0x145f
-#define USB_VID_CONEXANT			0x0572
-#define USB_VID_CYPRESS				0x04b4
-#define USB_VID_DEXATEK				0x1d19
-#define USB_VID_DIBCOM				0x10b8
-#define USB_VID_DPOSH				0x1498
-#define USB_VID_DVICO				0x0fe9
-#define USB_VID_E3C				0x18b4
-#define USB_VID_ELGATO				0x0fd9
-#define USB_VID_EMPIA				0xeb1a
-#define USB_VID_GENPIX				0x09c0
-#define USB_VID_GRANDTEC			0x5032
-#define USB_VID_GTEK				0x1f4d
-#define USB_VID_HANFTEK				0x15f4
-#define USB_VID_HAUPPAUGE			0x2040
-#define USB_VID_HYPER_PALTEK			0x1025
-#define USB_VID_INTEL				0x8086
-#define USB_VID_ITETECH				0x048d
-#define USB_VID_KWORLD				0xeb2a
-#define USB_VID_KWORLD_2			0x1b80
-#define USB_VID_KYE				0x0458
-#define USB_VID_LEADTEK				0x0413
-#define USB_VID_LITEON				0x04ca
-#define USB_VID_MEDION				0x1660
-#define USB_VID_MIGLIA				0x18f3
-#define USB_VID_MSI				0x0db0
-#define USB_VID_MSI_2				0x1462
-#define USB_VID_OPERA1				0x695c
-#define USB_VID_PINNACLE			0x2304
-#define USB_VID_PCTV				0x2013
-#define USB_VID_PIXELVIEW			0x1554
-#define USB_VID_REALTEK				0x0bda
-#define USB_VID_TECHNOTREND			0x0b48
-#define USB_VID_TERRATEC			0x0ccd
-#define USB_VID_TELESTAR			0x10b9
-#define USB_VID_VISIONPLUS			0x13d3
-#define USB_VID_SONY				0x1415
-#define USB_PID_TEVII_S421			0xd421
-#define USB_PID_TEVII_S480_1			0xd481
-#define USB_PID_TEVII_S480_2			0xd482
-#define USB_PID_TEVII_S630			0xd630
-#define USB_PID_TEVII_S632			0xd632
-#define USB_PID_TEVII_S650			0xd650
-#define USB_PID_TEVII_S660			0xd660
-#define USB_PID_TEVII_S662			0xd662
-#define USB_VID_TWINHAN				0x1822
-#define USB_VID_ULTIMA_ELECTRONIC		0x05d8
-#define USB_VID_UNIWILL				0x1584
-#define USB_VID_WIDEVIEW			0x14aa
-#define USB_VID_GIGABYTE			0x1044
-#define USB_VID_YUAN				0x1164
-#define USB_VID_XTENSIONS			0x1ae7
-#define USB_VID_ZYDAS				0x0ace
-#define USB_VID_HUMAX_COEX			0x10b9
-#define USB_VID_774				0x7a69
-#define USB_VID_EVOLUTEPC			0x1e59
-#define USB_VID_AZUREWAVE			0x13d3
-#define USB_VID_TECHNISAT			0x14f7
-#define USB_VID_HAMA				0x147f
-#define USB_VID_MICROSOFT			0x045e
-
-/* Product IDs */
-#define USB_PID_ADSTECH_USB2_COLD			0xa333
-#define USB_PID_ADSTECH_USB2_WARM			0xa334
-#define USB_PID_AFATECH_AF9005				0x9020
-#define USB_PID_AFATECH_AF9015_9015			0x9015
-#define USB_PID_AFATECH_AF9015_9016			0x9016
-#define USB_PID_AFATECH_AF9035_1000			0x1000
-#define USB_PID_AFATECH_AF9035_1001			0x1001
-#define USB_PID_AFATECH_AF9035_1002			0x1002
-#define USB_PID_AFATECH_AF9035_1003			0x1003
-#define USB_PID_AFATECH_AF9035_9035			0x9035
-#define USB_PID_TREKSTOR_DVBT				0x901b
-#define USB_PID_TREKSTOR_TERRES_2_0			0xC803
-#define USB_VID_ALINK_DTU				0xf170
-#define USB_PID_ANSONIC_DVBT_USB			0x6000
-#define USB_PID_ANYSEE					0x861f
-#define USB_PID_AZUREWAVE_AD_TU700			0x3237
-#define USB_PID_AZUREWAVE_6007				0x0ccd
-#define USB_PID_AVERMEDIA_DVBT_USB_COLD			0x0001
-#define USB_PID_AVERMEDIA_DVBT_USB_WARM			0x0002
-#define USB_PID_AVERMEDIA_DVBT_USB2_COLD		0xa800
-#define USB_PID_AVERMEDIA_DVBT_USB2_WARM		0xa801
-#define USB_PID_COMPRO_DVBU2000_COLD			0xd000
-#define USB_PID_COMPRO_DVBU2000_WARM			0xd001
-#define USB_PID_COMPRO_DVBU2000_UNK_COLD		0x010c
-#define USB_PID_COMPRO_DVBU2000_UNK_WARM		0x010d
-#define USB_PID_COMPRO_VIDEOMATE_U500			0x1e78
-#define USB_PID_COMPRO_VIDEOMATE_U500_PC		0x1e80
-#define USB_PID_CONCEPTRONIC_CTVDIGRCU			0xe397
-#define USB_PID_CONEXANT_D680_DMB			0x86d6
-#define USB_PID_CREATIX_CTX1921				0x1921
-#define USB_PID_DELOCK_USB2_DVBT			0xb803
-#define USB_PID_DIBCOM_HOOK_DEFAULT			0x0064
-#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM		0x0065
-#define USB_PID_DIBCOM_MOD3000_COLD			0x0bb8
-#define USB_PID_DIBCOM_MOD3000_WARM			0x0bb9
-#define USB_PID_DIBCOM_MOD3001_COLD			0x0bc6
-#define USB_PID_DIBCOM_MOD3001_WARM			0x0bc7
-#define USB_PID_DIBCOM_STK7700P				0x1e14
-#define USB_PID_DIBCOM_STK7700P_PC			0x1e78
-#define USB_PID_DIBCOM_STK7700D				0x1ef0
-#define USB_PID_DIBCOM_STK7700_U7000			0x7001
-#define USB_PID_DIBCOM_STK7070P				0x1ebc
-#define USB_PID_DIBCOM_STK7070PD			0x1ebe
-#define USB_PID_DIBCOM_STK807XP				0x1f90
-#define USB_PID_DIBCOM_STK807XPVR			0x1f98
-#define USB_PID_DIBCOM_STK8096GP                        0x1fa0
-#define USB_PID_DIBCOM_STK8096PVR                       0x1faa
-#define USB_PID_DIBCOM_NIM8096MD                        0x1fa8
-#define USB_PID_DIBCOM_TFE8096P				0x1f9C
-#define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
-#define USB_PID_DIBCOM_STK7770P				0x1e80
-#define USB_PID_DIBCOM_NIM7090				0x1bb2
-#define USB_PID_DIBCOM_TFE7090PVR			0x1bb4
-#define USB_PID_DIBCOM_TFE7790P				0x1e6e
-#define USB_PID_DIBCOM_NIM9090M				0x2383
-#define USB_PID_DIBCOM_NIM9090MD			0x2384
-#define USB_PID_DPOSH_M9206_COLD			0x9206
-#define USB_PID_DPOSH_M9206_WARM			0xa090
-#define USB_PID_E3C_EC168				0x1689
-#define USB_PID_E3C_EC168_2				0xfffa
-#define USB_PID_E3C_EC168_3				0xfffb
-#define USB_PID_E3C_EC168_4				0x1001
-#define USB_PID_E3C_EC168_5				0x1002
-#define USB_PID_FREECOM_DVBT				0x0160
-#define USB_PID_FREECOM_DVBT_2				0x0161
-#define USB_PID_UNIWILL_STK7700P			0x6003
-#define USB_PID_GENIUS_TVGO_DVB_T03			0x4012
-#define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
-#define USB_PID_GRANDTEC_DVBT_USB_WARM			0x0fa1
-#define USB_PID_GOTVIEW_SAT_HD				0x5456
-#define USB_PID_INTEL_CE9500				0x9500
-#define USB_PID_ITETECH_IT9135				0x9135
-#define USB_PID_ITETECH_IT9135_9005			0x9005
-#define USB_PID_ITETECH_IT9135_9006			0x9006
-#define USB_PID_ITETECH_IT9303				0x9306
-#define USB_PID_KWORLD_399U				0xe399
-#define USB_PID_KWORLD_399U_2				0xe400
-#define USB_PID_KWORLD_395U				0xe396
-#define USB_PID_KWORLD_395U_2				0xe39b
-#define USB_PID_KWORLD_395U_3				0xe395
-#define USB_PID_KWORLD_395U_4				0xe39a
-#define USB_PID_KWORLD_MC810				0xc810
-#define USB_PID_KWORLD_PC160_2T				0xc160
-#define USB_PID_KWORLD_PC160_T				0xc161
-#define USB_PID_KWORLD_UB383_T				0xe383
-#define USB_PID_KWORLD_UB499_2T_T09			0xe409
-#define USB_PID_KWORLD_VSTREAM_COLD			0x17de
-#define USB_PID_KWORLD_VSTREAM_WARM			0x17df
-#define USB_PID_PROF_1100				0xb012
-#define USB_PID_TERRATEC_CINERGY_S			0x0064
-#define USB_PID_TERRATEC_CINERGY_T_USB_XE		0x0055
-#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2		0x0069
-#define USB_PID_TERRATEC_CINERGY_T_STICK		0x0093
-#define USB_PID_TERRATEC_CINERGY_T_STICK_RC		0x0097
-#define USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC	0x0099
-#define USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1	0x00a9
-#define USB_PID_TWINHAN_VP7041_COLD			0x3201
-#define USB_PID_TWINHAN_VP7041_WARM			0x3202
-#define USB_PID_TWINHAN_VP7020_COLD			0x3203
-#define USB_PID_TWINHAN_VP7020_WARM			0x3204
-#define USB_PID_TWINHAN_VP7045_COLD			0x3205
-#define USB_PID_TWINHAN_VP7045_WARM			0x3206
-#define USB_PID_TWINHAN_VP7021_COLD			0x3207
-#define USB_PID_TWINHAN_VP7021_WARM			0x3208
-#define USB_PID_TWINHAN_VP7049				0x3219
-#define USB_PID_TINYTWIN				0x3226
-#define USB_PID_TINYTWIN_2				0xe402
-#define USB_PID_TINYTWIN_3				0x9016
-#define USB_PID_DNTV_TINYUSB2_COLD			0x3223
-#define USB_PID_DNTV_TINYUSB2_WARM			0x3224
-#define USB_PID_ULTIMA_TVBOX_COLD			0x8105
-#define USB_PID_ULTIMA_TVBOX_WARM			0x8106
-#define USB_PID_ULTIMA_TVBOX_AN2235_COLD		0x8107
-#define USB_PID_ULTIMA_TVBOX_AN2235_WARM		0x8108
-#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD		0x2235
-#define USB_PID_ULTIMA_TVBOX_USB2_COLD			0x8109
-#define USB_PID_ULTIMA_TVBOX_USB2_WARM			0x810a
-#define USB_PID_ARTEC_T14_COLD				0x810b
-#define USB_PID_ARTEC_T14_WARM				0x810c
-#define USB_PID_ARTEC_T14BR				0x810f
-#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD		0x8613
-#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM		0x1002
-#define USB_PID_UNK_HYPER_PALTEK_COLD			0x005e
-#define USB_PID_UNK_HYPER_PALTEK_WARM			0x005f
-#define USB_PID_HANFTEK_UMT_010_COLD			0x0001
-#define USB_PID_HANFTEK_UMT_010_WARM			0x0015
-#define USB_PID_DTT200U_COLD				0x0201
-#define USB_PID_DTT200U_WARM				0x0301
-#define USB_PID_WT220U_ZAP250_COLD			0x0220
-#define USB_PID_WT220U_COLD				0x0222
-#define USB_PID_WT220U_WARM				0x0221
-#define USB_PID_WT220U_FC_COLD				0x0225
-#define USB_PID_WT220U_FC_WARM				0x0226
-#define USB_PID_WT220U_ZL0353_COLD			0x022a
-#define USB_PID_WT220U_ZL0353_WARM			0x022b
-#define USB_PID_WINTV_NOVA_T_USB2_COLD			0x9300
-#define USB_PID_WINTV_NOVA_T_USB2_WARM			0x9301
-#define USB_PID_HAUPPAUGE_NOVA_T_500			0x9941
-#define USB_PID_HAUPPAUGE_NOVA_T_500_2			0x9950
-#define USB_PID_HAUPPAUGE_NOVA_T_500_3			0x8400
-#define USB_PID_HAUPPAUGE_NOVA_T_STICK			0x7050
-#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2		0x7060
-#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3		0x7070
-#define USB_PID_HAUPPAUGE_MYTV_T			0x7080
-#define USB_PID_HAUPPAUGE_NOVA_TD_STICK			0x9580
-#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009		0x5200
-#define USB_PID_HAUPPAUGE_TIGER_ATSC			0xb200
-#define USB_PID_HAUPPAUGE_TIGER_ATSC_B210		0xb210
-#define USB_PID_AVERMEDIA_EXPRESS			0xb568
-#define USB_PID_AVERMEDIA_VOLAR				0xa807
-#define USB_PID_AVERMEDIA_VOLAR_2			0xb808
-#define USB_PID_AVERMEDIA_VOLAR_A868R			0xa868
-#define USB_PID_AVERMEDIA_MCE_USB_M038			0x1228
-#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R	0x0039
-#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC	0x1039
-#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT	0x2039
-#define USB_PID_AVERMEDIA_VOLAR_X			0xa815
-#define USB_PID_AVERMEDIA_VOLAR_X_2			0x8150
-#define USB_PID_AVERMEDIA_A309				0xa309
-#define USB_PID_AVERMEDIA_A310				0xa310
-#define USB_PID_AVERMEDIA_A850				0x850a
-#define USB_PID_AVERMEDIA_A850T				0x850b
-#define USB_PID_AVERMEDIA_A805				0xa805
-#define USB_PID_AVERMEDIA_A815M				0x815a
-#define USB_PID_AVERMEDIA_A835				0xa835
-#define USB_PID_AVERMEDIA_B835				0xb835
-#define USB_PID_AVERMEDIA_A835B_1835			0x1835
-#define USB_PID_AVERMEDIA_A835B_2835			0x2835
-#define USB_PID_AVERMEDIA_A835B_3835			0x3835
-#define USB_PID_AVERMEDIA_A835B_4835			0x4835
-#define USB_PID_AVERMEDIA_1867				0x1867
-#define USB_PID_AVERMEDIA_A867				0xa867
-#define USB_PID_AVERMEDIA_H335				0x0335
-#define USB_PID_AVERMEDIA_TD110				0xa110
-#define USB_PID_AVERMEDIA_TWINSTAR			0x0825
-#define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
-#define USB_PID_TECHNOTREND_CONNECT_S2400_8KEEPROM	0x3009
-#define USB_PID_TECHNOTREND_CONNECT_CT3650		0x300d
-#define USB_PID_TECHNOTREND_CONNECT_S2_4600             0x3011
-#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI		0x3012
-#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI_2	0x3015
-#define USB_PID_TECHNOTREND_TVSTICK_CT2_4400		0x3014
-#define USB_PID_TECHNOTREND_CONNECT_S2_4650_CI		0x3017
-#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
-#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
-#define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
-#define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
-#define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
-#define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
-#define USB_PID_TERRATEC_CINERGY_T_XXS_2		0x00ab
-#define USB_PID_TERRATEC_CINERGY_S2_R1			0x00a8
-#define USB_PID_TERRATEC_CINERGY_S2_R2			0x00b0
-#define USB_PID_TERRATEC_CINERGY_S2_R3			0x0102
-#define USB_PID_TERRATEC_CINERGY_S2_R4			0x0105
-#define USB_PID_TERRATEC_H7				0x10b4
-#define USB_PID_TERRATEC_H7_2				0x10a3
-#define USB_PID_TERRATEC_H7_3				0x10a5
-#define USB_PID_TERRATEC_T1				0x10ae
-#define USB_PID_TERRATEC_T3				0x10a0
-#define USB_PID_TERRATEC_T5				0x10a1
-#define USB_PID_NOXON_DAB_STICK				0x00b3
-#define USB_PID_NOXON_DAB_STICK_REV2			0x00e0
-#define USB_PID_NOXON_DAB_STICK_REV3			0x00b4
-#define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
-#define USB_PID_PINNACLE_PCTV2000E			0x022c
-#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH		0x0228
-#define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T	0x0229
-#define USB_PID_PINNACLE_PCTV71E			0x022b
-#define USB_PID_PINNACLE_PCTV72E			0x0236
-#define USB_PID_PINNACLE_PCTV73E			0x0237
-#define USB_PID_PINNACLE_PCTV310E			0x3211
-#define USB_PID_PINNACLE_PCTV801E			0x023a
-#define USB_PID_PINNACLE_PCTV801E_SE			0x023b
-#define USB_PID_PINNACLE_PCTV340E			0x023d
-#define USB_PID_PINNACLE_PCTV340E_SE			0x023e
-#define USB_PID_PINNACLE_PCTV73A			0x0243
-#define USB_PID_PINNACLE_PCTV73ESE			0x0245
-#define USB_PID_PINNACLE_PCTV74E			0x0246
-#define USB_PID_PINNACLE_PCTV282E			0x0248
-#define USB_PID_PIXELVIEW_SBTVD				0x5010
-#define USB_PID_PCTV_200E				0x020e
-#define USB_PID_PCTV_400E				0x020f
-#define USB_PID_PCTV_450E				0x0222
-#define USB_PID_PCTV_452E				0x021f
-#define USB_PID_PCTV_78E				0x025a
-#define USB_PID_PCTV_79E				0x0262
-#define USB_PID_REALTEK_RTL2831U			0x2831
-#define USB_PID_REALTEK_RTL2832U			0x2832
-#define USB_PID_TECHNOTREND_CONNECT_S2_3600		0x3007
-#define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI		0x300a
-#define USB_PID_NEBULA_DIGITV				0x0201
-#define USB_PID_DVICO_BLUEBIRD_LGDT			0xd820
-#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD		0xd500
-#define USB_PID_DVICO_BLUEBIRD_LG064F_WARM		0xd501
-#define USB_PID_DVICO_BLUEBIRD_LGZ201_COLD		0xdb00
-#define USB_PID_DVICO_BLUEBIRD_LGZ201_WARM		0xdb01
-#define USB_PID_DVICO_BLUEBIRD_TH7579_COLD		0xdb10
-#define USB_PID_DVICO_BLUEBIRD_TH7579_WARM		0xdb11
-#define USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD		0xdb50
-#define USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM		0xdb51
-#define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD		0xdb58
-#define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM		0xdb59
-#define USB_PID_DVICO_BLUEBIRD_DUAL_4			0xdb78
-#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2		0xdb98
-#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2		0xdb70
-#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM	0xdb71
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD		0xdb54
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM		0xdb55
-#define USB_PID_MEDION_MD95700				0x0932
-#define USB_PID_MSI_MEGASKY580				0x5580
-#define USB_PID_MSI_MEGASKY580_55801			0x5581
-#define USB_PID_KYE_DVB_T_COLD				0x701e
-#define USB_PID_KYE_DVB_T_WARM				0x701f
-#define USB_PID_LITEON_DVB_T_COLD			0xf000
-#define USB_PID_LITEON_DVB_T_WARM			0xf001
-#define USB_PID_DIGIVOX_MINI_SL_COLD			0xe360
-#define USB_PID_DIGIVOX_MINI_SL_WARM			0xe361
-#define USB_PID_GRANDTEC_DVBT_USB2_COLD			0x0bc6
-#define USB_PID_GRANDTEC_DVBT_USB2_WARM			0x0bc7
-#define USB_PID_WINFAST_DTV2000DS			0x6a04
-#define USB_PID_WINFAST_DTV2000DS_PLUS			0x6f12
-#define USB_PID_WINFAST_DTV_DONGLE_COLD			0x6025
-#define USB_PID_WINFAST_DTV_DONGLE_WARM			0x6026
-#define USB_PID_WINFAST_DTV_DONGLE_STK7700P		0x6f00
-#define USB_PID_WINFAST_DTV_DONGLE_H			0x60f6
-#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2		0x6f01
-#define USB_PID_WINFAST_DTV_DONGLE_GOLD			0x6029
-#define USB_PID_WINFAST_DTV_DONGLE_MINID		0x6f0f
-#define USB_PID_GENPIX_8PSK_REV_1_COLD			0x0200
-#define USB_PID_GENPIX_8PSK_REV_1_WARM			0x0201
-#define USB_PID_GENPIX_8PSK_REV_2			0x0202
-#define USB_PID_GENPIX_SKYWALKER_1			0x0203
-#define USB_PID_GENPIX_SKYWALKER_CW3K			0x0204
-#define USB_PID_GENPIX_SKYWALKER_2			0x0206
-#define USB_PID_SIGMATEK_DVB_110			0x6610
-#define USB_PID_MSI_DIGI_VOX_MINI_II			0x1513
-#define USB_PID_MSI_DIGIVOX_DUO				0x8801
-#define USB_PID_OPERA1_COLD				0x2830
-#define USB_PID_OPERA1_WARM				0x3829
-#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD		0x0514
-#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM		0x0513
-#define USB_PID_GIGABYTE_U7000				0x7001
-#define USB_PID_GIGABYTE_U8000				0x7002
-#define USB_PID_ASUS_U3000				0x171f
-#define USB_PID_ASUS_U3000H				0x1736
-#define USB_PID_ASUS_U3100				0x173f
-#define USB_PID_ASUS_U3100MINI_PLUS			0x1779
-#define USB_PID_YUAN_EC372S				0x1edc
-#define USB_PID_YUAN_STK7700PH				0x1f08
-#define USB_PID_YUAN_PD378S				0x2edc
-#define USB_PID_YUAN_MC770				0x0871
-#define USB_PID_YUAN_STK7700D				0x1efc
-#define USB_PID_YUAN_STK7700D_2				0x1e8c
-#define USB_PID_DW2102					0x2102
-#define USB_PID_DW2104					0x2104
-#define USB_PID_DW3101					0x3101
-#define USB_PID_XTENSIONS_XD_380			0x0381
-#define USB_PID_TELESTAR_STARSTICK_2			0x8000
-#define USB_PID_MSI_DIGI_VOX_MINI_III                   0x8807
-#define USB_PID_SONY_PLAYTV				0x0003
-#define USB_PID_MYGICA_D689				0xd811
-#define USB_PID_MYGICA_T230				0xc688
-#define USB_PID_MYGICA_T230C				0xc689
-#define USB_PID_ELGATO_EYETV_DIVERSITY			0x0011
-#define USB_PID_ELGATO_EYETV_DTT			0x0021
-#define USB_PID_ELGATO_EYETV_DTT_2			0x003f
-#define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
-#define USB_PID_ELGATO_EYETV_SAT			0x002a
-#define USB_PID_ELGATO_EYETV_SAT_V2			0x0025
-#define USB_PID_ELGATO_EYETV_SAT_V3			0x0036
-#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD		0x5000
-#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM		0x5001
-#define USB_PID_FRIIO_WHITE				0x0001
-#define USB_PID_TVWAY_PLUS				0x0002
-#define USB_PID_SVEON_STV20				0xe39d
-#define USB_PID_SVEON_STV20_RTL2832U			0xd39d
-#define USB_PID_SVEON_STV21				0xd3b0
-#define USB_PID_SVEON_STV22				0xe401
-#define USB_PID_SVEON_STV22_IT9137			0xe411
-#define USB_PID_AZUREWAVE_AZ6027			0x3275
-#define USB_PID_TERRATEC_DVBS2CI_V1			0x10a4
-#define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
-#define USB_PID_TECHNISAT_USB2_HDCI_V1			0x0001
-#define USB_PID_TECHNISAT_USB2_HDCI_V2			0x0002
-#define USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI		0x0003
-#define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2		0x0004
-#define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
-#define USB_PID_CPYTO_REDI_PC50A			0xa803
-#define USB_PID_CTVDIGDUAL_V2				0xe410
-#define USB_PID_PCTV_2002E                              0x025c
-#define USB_PID_PCTV_2002E_SE                           0x025d
-#define USB_PID_SVEON_STV27                             0xd3af
-#define USB_PID_TURBOX_DTT_2000                         0xd3a4
-#define USB_PID_WINTV_SOLOHD                            0x0264
-#define USB_PID_EVOLVEO_XTRATV_STICK			0xa115
-#define USB_PID_HAMA_DVBT_HYBRID			0x2758
-#define USB_PID_XBOX_ONE_TUNER                          0x02d5
-#endif
diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index a3b2754e7124..77858046d347 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -37,8 +37,8 @@
 #include <linux/sched/signal.h>
 #include <linux/kthread.h>
 
-#include "dvb_ca_en50221.h"
-#include "dvb_ringbuffer.h"
+#include <media/dvb_ca_en50221.h>
+#include <media/dvb_ringbuffer.h>
 
 static int dvb_ca_en50221_debug;
 
diff --git a/drivers/media/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb-core/dvb_ca_en50221.h
deleted file mode 100644
index 367687d2b41a..000000000000
--- a/drivers/media/dvb-core/dvb_ca_en50221.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * dvb_ca.h: generic DVB functions for EN50221 CA interfaces
- *
- * Copyright (C) 2004 Andrew de Quincey
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- */
-
-#ifndef _DVB_CA_EN50221_H_
-#define _DVB_CA_EN50221_H_
-
-#include <linux/list.h>
-#include <linux/dvb/ca.h>
-
-#include "dvbdev.h"
-
-#define DVB_CA_EN50221_POLL_CAM_PRESENT	1
-#define DVB_CA_EN50221_POLL_CAM_CHANGED	2
-#define DVB_CA_EN50221_POLL_CAM_READY		4
-
-#define DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE	1
-#define DVB_CA_EN50221_FLAG_IRQ_FR		2
-#define DVB_CA_EN50221_FLAG_IRQ_DA		4
-
-#define DVB_CA_EN50221_CAMCHANGE_REMOVED		0
-#define DVB_CA_EN50221_CAMCHANGE_INSERTED		1
-
-/**
- * struct dvb_ca_en50221- Structure describing a CA interface
- *
- * @owner:		the module owning this structure
- * @read_attribute_mem:	function for reading attribute memory on the CAM
- * @write_attribute_mem: function for writing attribute memory on the CAM
- * @read_cam_control:	function for reading the control interface on the CAM
- * @write_cam_control:	function for reading the control interface on the CAM
- * @read_data:		function for reading data (block mode)
- * @write_data:		function for writing data (block mode)
- * @slot_reset:		function to reset the CAM slot
- * @slot_shutdown:	function to shutdown a CAM slot
- * @slot_ts_enable:	function to enable the Transport Stream on a CAM slot
- * @poll_slot_status:	function to poll slot status. Only necessary if
- *			DVB_CA_FLAG_EN50221_IRQ_CAMCHANGE is not set.
- * @data:		private data, used by caller.
- * @private:		Opaque data used by the dvb_ca core. Do not modify!
- *
- * NOTE: the read_*, write_* and poll_slot_status functions will be
- * called for different slots concurrently and need to use locks where
- * and if appropriate. There will be no concurrent access to one slot.
- */
-struct dvb_ca_en50221 {
-	struct module *owner;
-
-	int (*read_attribute_mem)(struct dvb_ca_en50221 *ca,
-				  int slot, int address);
-	int (*write_attribute_mem)(struct dvb_ca_en50221 *ca,
-				   int slot, int address, u8 value);
-
-	int (*read_cam_control)(struct dvb_ca_en50221 *ca,
-				int slot, u8 address);
-	int (*write_cam_control)(struct dvb_ca_en50221 *ca,
-				 int slot, u8 address, u8 value);
-
-	int (*read_data)(struct dvb_ca_en50221 *ca,
-			 int slot, u8 *ebuf, int ecount);
-	int (*write_data)(struct dvb_ca_en50221 *ca,
-			  int slot, u8 *ebuf, int ecount);
-
-	int (*slot_reset)(struct dvb_ca_en50221 *ca, int slot);
-	int (*slot_shutdown)(struct dvb_ca_en50221 *ca, int slot);
-	int (*slot_ts_enable)(struct dvb_ca_en50221 *ca, int slot);
-
-	int (*poll_slot_status)(struct dvb_ca_en50221 *ca, int slot, int open);
-
-	void *data;
-
-	void *private;
-};
-
-/*
- * Functions for reporting IRQ events
- */
-
-/**
- * dvb_ca_en50221_camchange_irq - A CAMCHANGE IRQ has occurred.
- *
- * @pubca: CA instance.
- * @slot: Slot concerned.
- * @change_type: One of the DVB_CA_CAMCHANGE_* values
- */
-void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot,
-				  int change_type);
-
-/**
- * dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred.
- *
- * @pubca: CA instance.
- * @slot: Slot concerned.
- */
-void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot);
-
-/**
- * dvb_ca_en50221_frda_irq - An FR or a DA IRQ has occurred.
- *
- * @ca: CA instance.
- * @slot: Slot concerned.
- */
-void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *ca, int slot);
-
-/*
- * Initialisation/shutdown functions
- */
-
-/**
- * dvb_ca_en50221_init - Initialise a new DVB CA device.
- *
- * @dvb_adapter: DVB adapter to attach the new CA device to.
- * @ca: The dvb_ca instance.
- * @flags: Flags describing the CA device (DVB_CA_EN50221_FLAG_*).
- * @slot_count: Number of slots supported.
- *
- * @return 0 on success, nonzero on failure
- */
-int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
-			struct dvb_ca_en50221 *ca, int flags,
-			       int slot_count);
-
-/**
- * dvb_ca_en50221_release - Release a DVB CA device.
- *
- * @ca: The associated dvb_ca instance.
- */
-void dvb_ca_en50221_release(struct dvb_ca_en50221 *ca);
-
-#endif
diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c
index acade7543b82..5047a1f87050 100644
--- a/drivers/media/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb-core/dvb_demux.c
@@ -30,7 +30,7 @@
 #include <linux/uaccess.h>
 #include <asm/div64.h>
 
-#include "dvb_demux.h"
+#include <media/dvb_demux.h>
 
 static int dvb_demux_tscheck;
 module_param(dvb_demux_tscheck, int, 0644);
diff --git a/drivers/media/dvb-core/dvb_demux.h b/drivers/media/dvb-core/dvb_demux.h
deleted file mode 100644
index c3bcdeed06c4..000000000000
--- a/drivers/media/dvb-core/dvb_demux.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * dvb_demux.h: DVB kernel demux API
- *
- * Copyright (C) 2000-2001 Marcus Metzler & Ralph Metzler
- *                         for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _DVB_DEMUX_H_
-#define _DVB_DEMUX_H_
-
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#include "demux.h"
-
-/**
- * enum dvb_dmx_filter_type - type of demux feed.
- *
- * @DMX_TYPE_TS:	feed is in TS mode.
- * @DMX_TYPE_SEC:	feed is in Section mode.
- */
-enum dvb_dmx_filter_type {
-	DMX_TYPE_TS,
-	DMX_TYPE_SEC,
-};
-
-/**
- * enum dvb_dmx_state - state machine for a demux filter.
- *
- * @DMX_STATE_FREE:		indicates that the filter is freed.
- * @DMX_STATE_ALLOCATED:	indicates that the filter was allocated
- *				to be used.
- * @DMX_STATE_READY:		indicates that the filter is ready
- *				to be used.
- * @DMX_STATE_GO:		indicates that the filter is running.
- */
-enum dvb_dmx_state {
-	DMX_STATE_FREE,
-	DMX_STATE_ALLOCATED,
-	DMX_STATE_READY,
-	DMX_STATE_GO,
-};
-
-#define DVB_DEMUX_MASK_MAX 18
-
-#define MAX_PID 0x1fff
-
-#define SPEED_PKTS_INTERVAL 50000
-
-/**
- * struct dvb_demux_filter - Describes a DVB demux section filter.
- *
- * @filter:		Section filter as defined by &struct dmx_section_filter.
- * @maskandmode:	logical ``and`` bit mask.
- * @maskandnotmode:	logical ``and not`` bit mask.
- * @doneq:		flag that indicates when a filter is ready.
- * @next:		pointer to the next section filter.
- * @feed:		&struct dvb_demux_feed pointer.
- * @index:		index of the used demux filter.
- * @state:		state of the filter as described by &enum dvb_dmx_state.
- * @type:		type of the filter as described
- *			by &enum dvb_dmx_filter_type.
- */
-
-struct dvb_demux_filter {
-	struct dmx_section_filter filter;
-	u8 maskandmode[DMX_MAX_FILTER_SIZE];
-	u8 maskandnotmode[DMX_MAX_FILTER_SIZE];
-	bool doneq;
-
-	struct dvb_demux_filter *next;
-	struct dvb_demux_feed *feed;
-	int index;
-	enum dvb_dmx_state state;
-	enum dvb_dmx_filter_type type;
-
-	/* private: used only by av7110 */
-	u16 hw_handle;
-};
-
-/**
- * struct dvb_demux_feed - describes a DVB field
- *
- * @feed:	a union describing a digital TV feed.
- *		Depending on the feed type, it can be either
- *		@feed.ts or @feed.sec.
- * @feed.ts:	a &struct dmx_ts_feed pointer.
- *		For TS feed only.
- * @feed.sec:	a &struct dmx_section_feed pointer.
- *		For section feed only.
- * @cb:		a union describing digital TV callbacks.
- *		Depending on the feed type, it can be either
- *		@cb.ts or @cb.sec.
- * @cb.ts:	a dmx_ts_cb() calback function pointer.
- *		For TS feed only.
- * @cb.sec:	a dmx_section_cb() callback function pointer.
- *		For section feed only.
- * @demux:	pointer to &struct dvb_demux.
- * @priv:	private data that can optionally be used by a DVB driver.
- * @type:	type of the filter, as defined by &enum dvb_dmx_filter_type.
- * @state:	state of the filter as defined by &enum dvb_dmx_state.
- * @pid:	PID to be filtered.
- * @timeout:	feed timeout.
- * @filter:	pointer to &struct dvb_demux_filter.
- * @ts_type:	type of TS, as defined by &enum ts_filter_type.
- * @pes_type:	type of PES, as defined by &enum dmx_ts_pes.
- * @cc:		MPEG-TS packet continuity counter
- * @pusi_seen:	if true, indicates that a discontinuity was detected.
- *		it is used to prevent feeding of garbage from previous section.
- * @peslen:	length of the PES (Packet Elementary Stream).
- * @list_head:	head for the list of digital TV demux feeds.
- * @index:	a unique index for each feed. Can be used as hardware
- *		pid filter index.
- */
-struct dvb_demux_feed {
-	union {
-		struct dmx_ts_feed ts;
-		struct dmx_section_feed sec;
-	} feed;
-
-	union {
-		dmx_ts_cb ts;
-		dmx_section_cb sec;
-	} cb;
-
-	struct dvb_demux *demux;
-	void *priv;
-	enum dvb_dmx_filter_type type;
-	enum dvb_dmx_state state;
-	u16 pid;
-
-	ktime_t timeout;
-	struct dvb_demux_filter *filter;
-
-	enum ts_filter_type ts_type;
-	enum dmx_ts_pes pes_type;
-
-	int cc;
-	bool pusi_seen;
-
-	u16 peslen;
-
-	struct list_head list_head;
-	unsigned int index;
-};
-
-/**
- * struct dvb_demux - represents a digital TV demux
- * @dmx:		embedded &struct dmx_demux with demux capabilities
- *			and callbacks.
- * @priv:		private data that can optionally be used by
- *			a DVB driver.
- * @filternum:		maximum amount of DVB filters.
- * @feednum:		maximum amount of DVB feeds.
- * @start_feed:		callback routine to be called in order to start
- *			a DVB feed.
- * @stop_feed:		callback routine to be called in order to stop
- *			a DVB feed.
- * @write_to_decoder:	callback routine to be called if the feed is TS and
- *			it is routed to an A/V decoder, when a new TS packet
- *			is received.
- *			Used only on av7110-av.c.
- * @check_crc32:	callback routine to check CRC. If not initialized,
- *			dvb_demux will use an internal one.
- * @memcopy:		callback routine to memcopy received data.
- *			If not initialized, dvb_demux will default to memcpy().
- * @users:		counter for the number of demux opened file descriptors.
- *			Currently, it is limited to 10 users.
- * @filter:		pointer to &struct dvb_demux_filter.
- * @feed:		pointer to &struct dvb_demux_feed.
- * @frontend_list:	&struct list_head with frontends used by the demux.
- * @pesfilter:		array of &struct dvb_demux_feed with the PES types
- *			that will be filtered.
- * @pids:		list of filtered program IDs.
- * @feed_list:		&struct list_head with feeds.
- * @tsbuf:		temporary buffer used internally to store TS packets.
- * @tsbufp:		temporary buffer index used internally.
- * @mutex:		pointer to &struct mutex used to protect feed set
- *			logic.
- * @lock:		pointer to &spinlock_t, used to protect buffer handling.
- * @cnt_storage:	buffer used for TS/TEI continuity check.
- * @speed_last_time:	&ktime_t used for TS speed check.
- * @speed_pkts_cnt:	packets count used for TS speed check.
- */
-struct dvb_demux {
-	struct dmx_demux dmx;
-	void *priv;
-	int filternum;
-	int feednum;
-	int (*start_feed)(struct dvb_demux_feed *feed);
-	int (*stop_feed)(struct dvb_demux_feed *feed);
-	int (*write_to_decoder)(struct dvb_demux_feed *feed,
-				 const u8 *buf, size_t len);
-	u32 (*check_crc32)(struct dvb_demux_feed *feed,
-			    const u8 *buf, size_t len);
-	void (*memcopy)(struct dvb_demux_feed *feed, u8 *dst,
-			 const u8 *src, size_t len);
-
-	int users;
-#define MAX_DVB_DEMUX_USERS 10
-	struct dvb_demux_filter *filter;
-	struct dvb_demux_feed *feed;
-
-	struct list_head frontend_list;
-
-	struct dvb_demux_feed *pesfilter[DMX_PES_OTHER];
-	u16 pids[DMX_PES_OTHER];
-
-#define DMX_MAX_PID 0x2000
-	struct list_head feed_list;
-	u8 tsbuf[204];
-	int tsbufp;
-
-	struct mutex mutex;
-	spinlock_t lock;
-
-	uint8_t *cnt_storage; /* for TS continuity check */
-
-	ktime_t speed_last_time; /* for TS speed check */
-	uint32_t speed_pkts_cnt; /* for TS speed check */
-
-	/* private: used only on av7110 */
-	int playing;
-	int recording;
-};
-
-/**
- * dvb_dmx_init - initialize a digital TV demux struct.
- *
- * @demux: &struct dvb_demux to be initialized.
- *
- * Before being able to register a digital TV demux struct, drivers
- * should call this routine. On its typical usage, some fields should
- * be initialized at the driver before calling it.
- *
- * A typical usecase is::
- *
- *	dvb->demux.dmx.capabilities =
- *		DMX_TS_FILTERING | DMX_SECTION_FILTERING |
- *		DMX_MEMORY_BASED_FILTERING;
- *	dvb->demux.priv       = dvb;
- *	dvb->demux.filternum  = 256;
- *	dvb->demux.feednum    = 256;
- *	dvb->demux.start_feed = driver_start_feed;
- *	dvb->demux.stop_feed  = driver_stop_feed;
- *	ret = dvb_dmx_init(&dvb->demux);
- *	if (ret < 0)
- *		return ret;
- */
-int dvb_dmx_init(struct dvb_demux *demux);
-
-/**
- * dvb_dmx_release - releases a digital TV demux internal buffers.
- *
- * @demux: &struct dvb_demux to be released.
- *
- * The DVB core internally allocates data at @demux. This routine
- * releases those data. Please notice that the struct itelf is not
- * released, as it can be embedded on other structs.
- */
-void dvb_dmx_release(struct dvb_demux *demux);
-
-/**
- * dvb_dmx_swfilter_packets - use dvb software filter for a buffer with
- *	multiple MPEG-TS packets with 188 bytes each.
- *
- * @demux: pointer to &struct dvb_demux
- * @buf: buffer with data to be filtered
- * @count: number of MPEG-TS packets with size of 188.
- *
- * The routine will discard a DVB packet that don't start with 0x47.
- *
- * Use this routine if the DVB demux fills MPEG-TS buffers that are
- * already aligned.
- *
- * NOTE: The @buf size should have size equal to ``count * 188``.
- */
-void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
-			      size_t count);
-
-/**
- * dvb_dmx_swfilter -  use dvb software filter for a buffer with
- *	multiple MPEG-TS packets with 188 bytes each.
- *
- * @demux: pointer to &struct dvb_demux
- * @buf: buffer with data to be filtered
- * @count: number of MPEG-TS packets with size of 188.
- *
- * If a DVB packet doesn't start with 0x47, it will seek for the first
- * byte that starts with 0x47.
- *
- * Use this routine if the DVB demux fill buffers that may not start with
- * a packet start mark (0x47).
- *
- * NOTE: The @buf size should have size equal to ``count * 188``.
- */
-void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count);
-
-/**
- * dvb_dmx_swfilter_204 -  use dvb software filter for a buffer with
- *	multiple MPEG-TS packets with 204 bytes each.
- *
- * @demux: pointer to &struct dvb_demux
- * @buf: buffer with data to be filtered
- * @count: number of MPEG-TS packets with size of 204.
- *
- * If a DVB packet doesn't start with 0x47, it will seek for the first
- * byte that starts with 0x47.
- *
- * Use this routine if the DVB demux fill buffers that may not start with
- * a packet start mark (0x47).
- *
- * NOTE: The @buf size should have size equal to ``count * 204``.
- */
-void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf,
-			  size_t count);
-
-/**
- * dvb_dmx_swfilter_raw -  make the raw data available to userspace without
- *	filtering
- *
- * @demux: pointer to &struct dvb_demux
- * @buf: buffer with data
- * @count: number of packets to be passed. The actual size of each packet
- *	depends on the &dvb_demux->feed->cb.ts logic.
- *
- * Use it if the driver needs to deliver the raw payload to userspace without
- * passing through the kernel demux. That is meant to support some
- * delivery systems that aren't based on MPEG-TS.
- *
- * This function relies on &dvb_demux->feed->cb.ts to actually handle the
- * buffer.
- */
-void dvb_dmx_swfilter_raw(struct dvb_demux *demux, const u8 *buf,
-			  size_t count);
-
-#endif /* _DVB_DEMUX_H_ */
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index 5547b9830bbc..722b86a43497 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -43,8 +43,8 @@
 #include <linux/compat.h>
 #include <asm/processor.h>
 
-#include "dvb_frontend.h"
-#include "dvbdev.h"
+#include <media/dvb_frontend.h>
+#include <media/dvbdev.h>
 #include <linux/dvb/version.h>
 
 static int dvb_frontend_debug;
diff --git a/drivers/media/dvb-core/dvb_frontend.h b/drivers/media/dvb-core/dvb_frontend.h
deleted file mode 100644
index 2bc25f1e425b..000000000000
--- a/drivers/media/dvb-core/dvb_frontend.h
+++ /dev/null
@@ -1,795 +0,0 @@
-/*
- * dvb_frontend.h
- *
- * The Digital TV Frontend kABI defines a driver-internal interface for
- * registering low-level, hardware specific driver to a hardware independent
- * frontend layer.
- *
- * Copyright (C) 2001 convergence integrated media GmbH
- * Copyright (C) 2004 convergence GmbH
- *
- * Written by Ralph Metzler
- * Overhauled by Holger Waechtler
- * Kernel I2C stuff by Michael Hunold <hunold@convergence.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVB_FRONTEND_H_
-#define _DVB_FRONTEND_H_
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/ioctl.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <linux/dvb/frontend.h>
-
-#include "dvbdev.h"
-
-/*
- * Maximum number of Delivery systems per frontend. It
- * should be smaller or equal to 32
- */
-#define MAX_DELSYS	8
-
-/**
- * struct dvb_frontend_tune_settings - parameters to adjust frontend tuning
- *
- * @min_delay_ms:	minimum delay for tuning, in ms
- * @step_size:		step size between two consecutive frequencies
- * @max_drift:		maximum drift
- *
- * NOTE: step_size is in Hz, for terrestrial/cable or kHz for satellite
- */
-struct dvb_frontend_tune_settings {
-	int min_delay_ms;
-	int step_size;
-	int max_drift;
-};
-
-struct dvb_frontend;
-
-/**
- * struct dvb_tuner_info - Frontend name and min/max ranges/bandwidths
- *
- * @name:		name of the Frontend
- * @frequency_min:	minimal frequency supported
- * @frequency_max:	maximum frequency supported
- * @frequency_step:	frequency step
- * @bandwidth_min:	minimal frontend bandwidth supported
- * @bandwidth_max:	maximum frontend bandwidth supported
- * @bandwidth_step:	frontend bandwidth step
- *
- * NOTE: frequency parameters are in Hz, for terrestrial/cable or kHz for
- * satellite.
- */
-struct dvb_tuner_info {
-	char name[128];
-
-	u32 frequency_min;
-	u32 frequency_max;
-	u32 frequency_step;
-
-	u32 bandwidth_min;
-	u32 bandwidth_max;
-	u32 bandwidth_step;
-};
-
-/**
- * struct analog_parameters - Parameters to tune into an analog/radio channel
- *
- * @frequency:	Frequency used by analog TV tuner (either in 62.5 kHz step,
- * 		for TV, or 62.5 Hz for radio)
- * @mode:	Tuner mode, as defined on enum v4l2_tuner_type
- * @audmode:	Audio mode as defined for the rxsubchans field at videodev2.h,
- * 		e. g. V4L2_TUNER_MODE_*
- * @std:	TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_*
- *
- * Hybrid tuners should be supported by both V4L2 and DVB APIs. This
- * struct contains the data that are used by the V4L2 side. To avoid
- * dependencies from V4L2 headers, all enums here are declared as integers.
- */
-struct analog_parameters {
-	unsigned int frequency;
-	unsigned int mode;
-	unsigned int audmode;
-	u64 std;
-};
-
-/**
- * enum dvbfe_algo - defines the algorithm used to tune into a channel
- *
- * @DVBFE_ALGO_HW: Hardware Algorithm -
- *	Devices that support this algorithm do everything in hardware
- *	and no software support is needed to handle them.
- *	Requesting these devices to LOCK is the only thing required,
- *	device is supposed to do everything in the hardware.
- *
- * @DVBFE_ALGO_SW: Software Algorithm -
- * These are dumb devices, that require software to do everything
- *
- * @DVBFE_ALGO_CUSTOM: Customizable Agorithm -
- *	Devices having this algorithm can be customized to have specific
- *	algorithms in the frontend driver, rather than simply doing a
- *	software zig-zag. In this case the zigzag maybe hardware assisted
- *	or it maybe completely done in hardware. In all cases, usage of
- *	this algorithm, in conjunction with the search and track
- *	callbacks, utilizes the driver specific algorithm.
- *
- * @DVBFE_ALGO_RECOVERY: Recovery Algorithm -
- *	These devices have AUTO recovery capabilities from LOCK failure
- */
-enum dvbfe_algo {
-	DVBFE_ALGO_HW			= (1 <<  0),
-	DVBFE_ALGO_SW			= (1 <<  1),
-	DVBFE_ALGO_CUSTOM		= (1 <<  2),
-	DVBFE_ALGO_RECOVERY		= (1 << 31)
-};
-
-/**
- * enum dvbfe_search - search callback possible return status
- *
- * @DVBFE_ALGO_SEARCH_SUCCESS:
- *	The frontend search algorithm completed and returned successfully
- *
- * @DVBFE_ALGO_SEARCH_ASLEEP:
- *	The frontend search algorithm is sleeping
- *
- * @DVBFE_ALGO_SEARCH_FAILED:
- *	The frontend search for a signal failed
- *
- * @DVBFE_ALGO_SEARCH_INVALID:
- *	The frontend search algorith was probably supplied with invalid
- *	parameters and the search is an invalid one
- *
- * @DVBFE_ALGO_SEARCH_ERROR:
- *	The frontend search algorithm failed due to some error
- *
- * @DVBFE_ALGO_SEARCH_AGAIN:
- *	The frontend search algorithm was requested to search again
- */
-enum dvbfe_search {
-	DVBFE_ALGO_SEARCH_SUCCESS	= (1 <<  0),
-	DVBFE_ALGO_SEARCH_ASLEEP	= (1 <<  1),
-	DVBFE_ALGO_SEARCH_FAILED	= (1 <<  2),
-	DVBFE_ALGO_SEARCH_INVALID	= (1 <<  3),
-	DVBFE_ALGO_SEARCH_AGAIN		= (1 <<  4),
-	DVBFE_ALGO_SEARCH_ERROR		= (1 << 31),
-};
-
-/**
- * struct dvb_tuner_ops - Tuner information and callbacks
- *
- * @info:		embedded &struct dvb_tuner_info with tuner properties
- * @release:		callback function called when frontend is detached.
- *			drivers should free any allocated memory.
- * @init:		callback function used to initialize the tuner device.
- * @sleep:		callback function used to put the tuner to sleep.
- * @suspend:		callback function used to inform that the Kernel will
- *			suspend.
- * @resume:		callback function used to inform that the Kernel is
- *			resuming from suspend.
- * @set_params:		callback function used to inform the tuner to tune
- *			into a digital TV channel. The properties to be used
- *			are stored at &struct dvb_frontend.dtv_property_cache.
- *			The tuner demod can change the parameters to reflect
- *			the changes needed for the channel to be tuned, and
- *			update statistics. This is the recommended way to set
- *			the tuner parameters and should be used on newer
- *			drivers.
- * @set_analog_params:	callback function used to tune into an analog TV
- *			channel on hybrid tuners. It passes @analog_parameters
- *			to the driver.
- * @set_config:		callback function used to send some tuner-specific
- *			parameters.
- * @get_frequency:	get the actual tuned frequency
- * @get_bandwidth:	get the bandwitdh used by the low pass filters
- * @get_if_frequency:	get the Intermediate Frequency, in Hz. For baseband,
- * 			should return 0.
- * @get_status:		returns the frontend lock status
- * @get_rf_strength:	returns the RF signal strength. Used mostly to support
- *			analog TV and radio. Digital TV should report, instead,
- *			via DVBv5 API (&struct dvb_frontend.dtv_property_cache).
- * @get_afc:		Used only by analog TV core. Reports the frequency
- *			drift due to AFC.
- * @calc_regs:		callback function used to pass register data settings
- *			for simple tuners.  Shouldn't be used on newer drivers.
- * @set_frequency:	Set a new frequency. Shouldn't be used on newer drivers.
- * @set_bandwidth:	Set a new frequency. Shouldn't be used on newer drivers.
- *
- * NOTE: frequencies used on @get_frequency and @set_frequency are in Hz for
- * terrestrial/cable or kHz for satellite.
- *
- */
-struct dvb_tuner_ops {
-
-	struct dvb_tuner_info info;
-
-	void (*release)(struct dvb_frontend *fe);
-	int (*init)(struct dvb_frontend *fe);
-	int (*sleep)(struct dvb_frontend *fe);
-	int (*suspend)(struct dvb_frontend *fe);
-	int (*resume)(struct dvb_frontend *fe);
-
-	/* This is the recomended way to set the tuner */
-	int (*set_params)(struct dvb_frontend *fe);
-	int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p);
-
-	int (*set_config)(struct dvb_frontend *fe, void *priv_cfg);
-
-	int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency);
-	int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
-	int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency);
-
-#define TUNER_STATUS_LOCKED 1
-#define TUNER_STATUS_STEREO 2
-	int (*get_status)(struct dvb_frontend *fe, u32 *status);
-	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
-	int (*get_afc)(struct dvb_frontend *fe, s32 *afc);
-
-	/*
-	 * This is support for demods like the mt352 - fills out the supplied
-	 * buffer with what to write.
-	 *
-	 * Don't use on newer drivers.
-	 */
-	int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len);
-
-	/*
-	 * These are provided separately from set_params in order to
-	 * facilitate silicon tuners which require sophisticated tuning loops,
-	 * controlling each parameter separately.
-	 *
-	 * Don't use on newer drivers.
-	 */
-	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
-	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
-};
-
-/**
- * struct analog_demod_info - Information struct for analog TV part of the demod
- *
- * @name:	Name of the analog TV demodulator
- */
-struct analog_demod_info {
-	char *name;
-};
-
-/**
- * struct analog_demod_ops  - Demodulation information and callbacks for
- *			      analog TV and radio
- *
- * @info:		pointer to struct analog_demod_info
- * @set_params:		callback function used to inform the demod to set the
- *			demodulator parameters needed to decode an analog or
- *			radio channel. The properties are passed via
- *			&struct analog_params.
- * @has_signal:		returns 0xffff if has signal, or 0 if it doesn't.
- * @get_afc:		Used only by analog TV core. Reports the frequency
- *			drift due to AFC.
- * @tuner_status:	callback function that returns tuner status bits, e. g.
- *			%TUNER_STATUS_LOCKED and %TUNER_STATUS_STEREO.
- * @standby:		set the tuner to standby mode.
- * @release:		callback function called when frontend is detached.
- *			drivers should free any allocated memory.
- * @i2c_gate_ctrl:	controls the I2C gate. Newer drivers should use I2C
- *			mux support instead.
- * @set_config:		callback function used to send some tuner-specific
- *			parameters.
- */
-struct analog_demod_ops {
-
-	struct analog_demod_info info;
-
-	void (*set_params)(struct dvb_frontend *fe,
-			   struct analog_parameters *params);
-	int  (*has_signal)(struct dvb_frontend *fe, u16 *signal);
-	int  (*get_afc)(struct dvb_frontend *fe, s32 *afc);
-	void (*tuner_status)(struct dvb_frontend *fe);
-	void (*standby)(struct dvb_frontend *fe);
-	void (*release)(struct dvb_frontend *fe);
-	int  (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable);
-
-	/** This is to allow setting tuner-specific configuration */
-	int (*set_config)(struct dvb_frontend *fe, void *priv_cfg);
-};
-
-struct dtv_frontend_properties;
-
-
-/**
- * struct dvb_frontend_ops - Demodulation information and callbacks for
- *			      ditialt TV
- *
- * @info:		embedded &struct dvb_tuner_info with tuner properties
- * @delsys:		Delivery systems supported by the frontend
- * @detach:		callback function called when frontend is detached.
- *			drivers should clean up, but not yet free the &struct
- *			dvb_frontend allocation.
- * @release:		callback function called when frontend is ready to be
- *			freed.
- *			drivers should free any allocated memory.
- * @release_sec:	callback function requesting that the Satelite Equipment
- *			Control (SEC) driver to release and free any memory
- *			allocated by the driver.
- * @init:		callback function used to initialize the tuner device.
- * @sleep:		callback function used to put the tuner to sleep.
- * @write:		callback function used by some demod legacy drivers to
- *			allow other drivers to write data into their registers.
- *			Should not be used on new drivers.
- * @tune:		callback function used by demod drivers that use
- *			@DVBFE_ALGO_HW to tune into a frequency.
- * @get_frontend_algo:	returns the desired hardware algorithm.
- * @set_frontend:	callback function used to inform the demod to set the
- *			parameters for demodulating a digital TV channel.
- *			The properties to be used are stored at &struct
- *			dvb_frontend.dtv_property_cache. The demod can change
- *			the parameters to reflect the changes needed for the
- *			channel to be decoded, and update statistics.
- * @get_tune_settings:	callback function
- * @get_frontend:	callback function used to inform the parameters
- *			actuall in use. The properties to be used are stored at
- *			&struct dvb_frontend.dtv_property_cache and update
- *			statistics. Please notice that it should not return
- *			an error code if the statistics are not available
- *			because the demog is not locked.
- * @read_status:	returns the locking status of the frontend.
- * @read_ber:		legacy callback function to return the bit error rate.
- *			Newer drivers should provide such info via DVBv5 API,
- *			e. g. @set_frontend;/@get_frontend, implementing this
- *			callback only if DVBv3 API compatibility is wanted.
- * @read_signal_strength: legacy callback function to return the signal
- *			strength. Newer drivers should provide such info via
- *			DVBv5 API, e. g. @set_frontend/@get_frontend,
- *			implementing this callback only if DVBv3 API
- *			compatibility is wanted.
- * @read_snr:		legacy callback function to return the Signal/Noise
- * 			rate. Newer drivers should provide such info via
- *			DVBv5 API, e. g. @set_frontend/@get_frontend,
- *			implementing this callback only if DVBv3 API
- *			compatibility is wanted.
- * @read_ucblocks:	legacy callback function to return the Uncorrected Error
- *			Blocks. Newer drivers should provide such info via
- *			DVBv5 API, e. g. @set_frontend/@get_frontend,
- *			implementing this callback only if DVBv3 API
- *			compatibility is wanted.
- * @diseqc_reset_overload: callback function to implement the
- *			FE_DISEQC_RESET_OVERLOAD() ioctl (only Satellite)
- * @diseqc_send_master_cmd: callback function to implement the
- *			FE_DISEQC_SEND_MASTER_CMD() ioctl (only Satellite).
- * @diseqc_recv_slave_reply: callback function to implement the
- *			FE_DISEQC_RECV_SLAVE_REPLY() ioctl (only Satellite)
- * @diseqc_send_burst:	callback function to implement the
- *			FE_DISEQC_SEND_BURST() ioctl (only Satellite).
- * @set_tone:		callback function to implement the
- *			FE_SET_TONE() ioctl (only Satellite).
- * @set_voltage:	callback function to implement the
- *			FE_SET_VOLTAGE() ioctl (only Satellite).
- * @enable_high_lnb_voltage: callback function to implement the
- *			FE_ENABLE_HIGH_LNB_VOLTAGE() ioctl (only Satellite).
- * @dishnetwork_send_legacy_command: callback function to implement the
- *			FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl (only Satellite).
- *			Drivers should not use this, except when the DVB
- *			core emulation fails to provide proper support (e.g.
- *			if @set_voltage takes more than 8ms to work), and
- *			when backward compatibility with this legacy API is
- *			required.
- * @i2c_gate_ctrl:	controls the I2C gate. Newer drivers should use I2C
- *			mux support instead.
- * @ts_bus_ctrl:	callback function used to take control of the TS bus.
- * @set_lna:		callback function to power on/off/auto the LNA.
- * @search:		callback function used on some custom algo search algos.
- * @tuner_ops:		pointer to &struct dvb_tuner_ops
- * @analog_ops:		pointer to &struct analog_demod_ops
- */
-struct dvb_frontend_ops {
-	struct dvb_frontend_info info;
-
-	u8 delsys[MAX_DELSYS];
-
-	void (*detach)(struct dvb_frontend *fe);
-	void (*release)(struct dvb_frontend* fe);
-	void (*release_sec)(struct dvb_frontend* fe);
-
-	int (*init)(struct dvb_frontend* fe);
-	int (*sleep)(struct dvb_frontend* fe);
-
-	int (*write)(struct dvb_frontend* fe, const u8 buf[], int len);
-
-	/* if this is set, it overrides the default swzigzag */
-	int (*tune)(struct dvb_frontend* fe,
-		    bool re_tune,
-		    unsigned int mode_flags,
-		    unsigned int *delay,
-		    enum fe_status *status);
-
-	/* get frontend tuning algorithm from the module */
-	enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe);
-
-	/* these two are only used for the swzigzag code */
-	int (*set_frontend)(struct dvb_frontend *fe);
-	int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings);
-
-	int (*get_frontend)(struct dvb_frontend *fe,
-			    struct dtv_frontend_properties *props);
-
-	int (*read_status)(struct dvb_frontend *fe, enum fe_status *status);
-	int (*read_ber)(struct dvb_frontend* fe, u32* ber);
-	int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength);
-	int (*read_snr)(struct dvb_frontend* fe, u16* snr);
-	int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks);
-
-	int (*diseqc_reset_overload)(struct dvb_frontend* fe);
-	int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd);
-	int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply);
-	int (*diseqc_send_burst)(struct dvb_frontend *fe,
-				 enum fe_sec_mini_cmd minicmd);
-	int (*set_tone)(struct dvb_frontend *fe, enum fe_sec_tone_mode tone);
-	int (*set_voltage)(struct dvb_frontend *fe,
-			   enum fe_sec_voltage voltage);
-	int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg);
-	int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd);
-	int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable);
-	int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire);
-	int (*set_lna)(struct dvb_frontend *);
-
-	/*
-	 * These callbacks are for devices that implement their own
-	 * tuning algorithms, rather than a simple swzigzag
-	 */
-	enum dvbfe_search (*search)(struct dvb_frontend *fe);
-
-	struct dvb_tuner_ops tuner_ops;
-	struct analog_demod_ops analog_ops;
-};
-
-#ifdef __DVB_CORE__
-#define MAX_EVENT 8
-
-/* Used only internally at dvb_frontend.c */
-struct dvb_fe_events {
-	struct dvb_frontend_event events[MAX_EVENT];
-	int			  eventw;
-	int			  eventr;
-	int			  overflow;
-	wait_queue_head_t	  wait_queue;
-	struct mutex		  mtx;
-};
-#endif
-
-/**
- * struct dtv_frontend_properties - contains a list of properties that are
- *				    specific to a digital TV standard.
- *
- * @frequency:		frequency in Hz for terrestrial/cable or in kHz for
- *			Satellite
- * @modulation:		Frontend modulation type
- * @voltage:		SEC voltage (only Satellite)
- * @sectone:		SEC tone mode (only Satellite)
- * @inversion:		Spectral inversion
- * @fec_inner:		Forward error correction inner Code Rate
- * @transmission_mode:	Transmission Mode
- * @bandwidth_hz:	Bandwidth, in Hz. A zero value means that userspace
- * 			wants to autodetect.
- * @guard_interval:	Guard Interval
- * @hierarchy:		Hierarchy
- * @symbol_rate:	Symbol Rate
- * @code_rate_HP:	high priority stream code rate
- * @code_rate_LP:	low priority stream code rate
- * @pilot:		Enable/disable/autodetect pilot tones
- * @rolloff:		Rolloff factor (alpha)
- * @delivery_system:	FE delivery system (e. g. digital TV standard)
- * @interleaving:	interleaving
- * @isdbt_partial_reception: ISDB-T partial reception (only ISDB standard)
- * @isdbt_sb_mode:	ISDB-T Sound Broadcast (SB) mode (only ISDB standard)
- * @isdbt_sb_subchannel:	ISDB-T SB subchannel (only ISDB standard)
- * @isdbt_sb_segment_idx:	ISDB-T SB segment index (only ISDB standard)
- * @isdbt_sb_segment_count:	ISDB-T SB segment count (only ISDB standard)
- * @isdbt_layer_enabled:	ISDB Layer enabled (only ISDB standard)
- * @layer:		ISDB per-layer data (only ISDB standard)
- * @layer.segment_count: Segment Count;
- * @layer.fec:		per layer code rate;
- * @layer.modulation:	per layer modulation;
- * @layer.interleaving:	 per layer interleaving.
- * @stream_id:		If different than zero, enable substream filtering, if
- *			hardware supports (DVB-S2 and DVB-T2).
- * @scrambling_sequence_index:	Carries the index of the DVB-S2 physical layer
- *				scrambling sequence.
- * @atscmh_fic_ver:	Version number of the FIC (Fast Information Channel)
- *			signaling data (only ATSC-M/H)
- * @atscmh_parade_id:	Parade identification number (only ATSC-M/H)
- * @atscmh_nog:		Number of MH groups per MH subframe for a designated
- *			parade (only ATSC-M/H)
- * @atscmh_tnog:	Total number of MH groups including all MH groups
- *			belonging to all MH parades in one MH subframe
- *			(only ATSC-M/H)
- * @atscmh_sgn:		Start group number (only ATSC-M/H)
- * @atscmh_prc:		Parade repetition cycle (only ATSC-M/H)
- * @atscmh_rs_frame_mode:	Reed Solomon (RS) frame mode (only ATSC-M/H)
- * @atscmh_rs_frame_ensemble:	RS frame ensemble (only ATSC-M/H)
- * @atscmh_rs_code_mode_pri:	RS code mode pri (only ATSC-M/H)
- * @atscmh_rs_code_mode_sec:	RS code mode sec (only ATSC-M/H)
- * @atscmh_sccc_block_mode:	Series Concatenated Convolutional Code (SCCC)
- *				Block Mode (only ATSC-M/H)
- * @atscmh_sccc_code_mode_a:	SCCC code mode A (only ATSC-M/H)
- * @atscmh_sccc_code_mode_b:	SCCC code mode B (only ATSC-M/H)
- * @atscmh_sccc_code_mode_c:	SCCC code mode C (only ATSC-M/H)
- * @atscmh_sccc_code_mode_d:	SCCC code mode D (only ATSC-M/H)
- * @lna:		Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA)
- * @strength:		DVBv5 API statistics: Signal Strength
- * @cnr:		DVBv5 API statistics: Signal to Noise ratio of the
- * 			(main) carrier
- * @pre_bit_error:	DVBv5 API statistics: pre-Viterbi bit error count
- * @pre_bit_count:	DVBv5 API statistics: pre-Viterbi bit count
- * @post_bit_error:	DVBv5 API statistics: post-Viterbi bit error count
- * @post_bit_count:	DVBv5 API statistics: post-Viterbi bit count
- * @block_error:	DVBv5 API statistics: block error count
- * @block_count:	DVBv5 API statistics: block count
- *
- * NOTE: derivated statistics like Uncorrected Error blocks (UCE) are
- * calculated on userspace.
- *
- * Only a subset of the properties are needed for a given delivery system.
- * For more info, consult the media_api.html with the documentation of the
- * Userspace API.
- */
-struct dtv_frontend_properties {
-	u32			frequency;
-	enum fe_modulation	modulation;
-
-	enum fe_sec_voltage	voltage;
-	enum fe_sec_tone_mode	sectone;
-	enum fe_spectral_inversion inversion;
-	enum fe_code_rate	fec_inner;
-	enum fe_transmit_mode	transmission_mode;
-	u32			bandwidth_hz;	/* 0 = AUTO */
-	enum fe_guard_interval	guard_interval;
-	enum fe_hierarchy	hierarchy;
-	u32			symbol_rate;
-	enum fe_code_rate	code_rate_HP;
-	enum fe_code_rate	code_rate_LP;
-
-	enum fe_pilot		pilot;
-	enum fe_rolloff		rolloff;
-
-	enum fe_delivery_system	delivery_system;
-
-	enum fe_interleaving	interleaving;
-
-	/* ISDB-T specifics */
-	u8			isdbt_partial_reception;
-	u8			isdbt_sb_mode;
-	u8			isdbt_sb_subchannel;
-	u32			isdbt_sb_segment_idx;
-	u32			isdbt_sb_segment_count;
-	u8			isdbt_layer_enabled;
-	struct {
-	    u8			segment_count;
-	    enum fe_code_rate	fec;
-	    enum fe_modulation	modulation;
-	    u8			interleaving;
-	} layer[3];
-
-	/* Multistream specifics */
-	u32			stream_id;
-
-	/* Physical Layer Scrambling specifics */
-	u32			scrambling_sequence_index;
-
-	/* ATSC-MH specifics */
-	u8			atscmh_fic_ver;
-	u8			atscmh_parade_id;
-	u8			atscmh_nog;
-	u8			atscmh_tnog;
-	u8			atscmh_sgn;
-	u8			atscmh_prc;
-
-	u8			atscmh_rs_frame_mode;
-	u8			atscmh_rs_frame_ensemble;
-	u8			atscmh_rs_code_mode_pri;
-	u8			atscmh_rs_code_mode_sec;
-	u8			atscmh_sccc_block_mode;
-	u8			atscmh_sccc_code_mode_a;
-	u8			atscmh_sccc_code_mode_b;
-	u8			atscmh_sccc_code_mode_c;
-	u8			atscmh_sccc_code_mode_d;
-
-	u32			lna;
-
-	/* statistics data */
-	struct dtv_fe_stats	strength;
-	struct dtv_fe_stats	cnr;
-	struct dtv_fe_stats	pre_bit_error;
-	struct dtv_fe_stats	pre_bit_count;
-	struct dtv_fe_stats	post_bit_error;
-	struct dtv_fe_stats	post_bit_count;
-	struct dtv_fe_stats	block_error;
-	struct dtv_fe_stats	block_count;
-};
-
-#define DVB_FE_NO_EXIT  0
-#define DVB_FE_NORMAL_EXIT      1
-#define DVB_FE_DEVICE_REMOVED   2
-#define DVB_FE_DEVICE_RESUME    3
-
-/**
- * struct dvb_frontend - Frontend structure to be used on drivers.
- *
- * @refcount:		refcount to keep track of &struct dvb_frontend
- *			references
- * @ops:		embedded &struct dvb_frontend_ops
- * @dvb:		pointer to &struct dvb_adapter
- * @demodulator_priv:	demod private data
- * @tuner_priv:		tuner private data
- * @frontend_priv:	frontend private data
- * @sec_priv:		SEC private data
- * @analog_demod_priv:	Analog demod private data
- * @dtv_property_cache:	embedded &struct dtv_frontend_properties
- * @callback:		callback function used on some drivers to call
- *			either the tuner or the demodulator.
- * @id:			Frontend ID
- * @exit:		Used to inform the DVB core that the frontend
- *			thread should exit (usually, means that the hardware
- *			got disconnected.
- */
-
-struct dvb_frontend {
-	struct kref refcount;
-	struct dvb_frontend_ops ops;
-	struct dvb_adapter *dvb;
-	void *demodulator_priv;
-	void *tuner_priv;
-	void *frontend_priv;
-	void *sec_priv;
-	void *analog_demod_priv;
-	struct dtv_frontend_properties dtv_property_cache;
-#define DVB_FRONTEND_COMPONENT_TUNER 0
-#define DVB_FRONTEND_COMPONENT_DEMOD 1
-	int (*callback)(void *adapter_priv, int component, int cmd, int arg);
-	int id;
-	unsigned int exit;
-};
-
-/**
- * dvb_register_frontend() - Registers a DVB frontend at the adapter
- *
- * @dvb: pointer to &struct dvb_adapter
- * @fe: pointer to &struct dvb_frontend
- *
- * Allocate and initialize the private data needed by the frontend core to
- * manage the frontend and calls dvb_register_device() to register a new
- * frontend. It also cleans the property cache that stores the frontend
- * parameters and selects the first available delivery system.
- */
-int dvb_register_frontend(struct dvb_adapter *dvb,
-				 struct dvb_frontend *fe);
-
-/**
- * dvb_unregister_frontend() - Unregisters a DVB frontend
- *
- * @fe: pointer to &struct dvb_frontend
- *
- * Stops the frontend kthread, calls dvb_unregister_device() and frees the
- * private frontend data allocated by dvb_register_frontend().
- *
- * NOTE: This function doesn't frees the memory allocated by the demod,
- * by the SEC driver and by the tuner. In order to free it, an explicit call to
- * dvb_frontend_detach() is needed, after calling this function.
- */
-int dvb_unregister_frontend(struct dvb_frontend *fe);
-
-/**
- * dvb_frontend_detach() - Detaches and frees frontend specific data
- *
- * @fe: pointer to &struct dvb_frontend
- *
- * This function should be called after dvb_unregister_frontend(). It
- * calls the SEC, tuner and demod release functions:
- * &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release,
- * &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release.
- *
- * If the driver is compiled with %CONFIG_MEDIA_ATTACH, it also decreases
- * the module reference count, needed to allow userspace to remove the
- * previously used DVB frontend modules.
- */
-void dvb_frontend_detach(struct dvb_frontend *fe);
-
-/**
- * dvb_frontend_suspend() - Suspends a Digital TV frontend
- *
- * @fe: pointer to &struct dvb_frontend
- *
- * This function prepares a Digital TV frontend to suspend.
- *
- * In order to prepare the tuner to suspend, if
- * &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise,
- * it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available.
- *
- * It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend.
- *
- * The drivers should also call dvb_frontend_suspend\(\) as part of their
- * handler for the &device_driver.suspend\(\).
- */
-int dvb_frontend_suspend(struct dvb_frontend *fe);
-
-/**
- * dvb_frontend_resume() - Resumes a Digital TV frontend
- *
- * @fe: pointer to &struct dvb_frontend
- *
- * This function resumes the usual operation of the tuner after resume.
- *
- * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\).
- *
- * If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it.
- * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available.
- *
- * Once tuner and demods are resumed, it will enforce that the SEC voltage and
- * tone are restored to their previous values and wake up the frontend's
- * kthread in order to retune the frontend.
- *
- * The drivers should also call dvb_frontend_resume() as part of their
- * handler for the &device_driver.resume\(\).
- */
-int dvb_frontend_resume(struct dvb_frontend *fe);
-
-/**
- * dvb_frontend_reinitialise() - forces a reinitialisation at the frontend
- *
- * @fe: pointer to &struct dvb_frontend
- *
- * Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\),
- * and resets SEC tone and voltage (for Satellite systems).
- *
- * NOTE: Currently, this function is used only by one driver (budget-av).
- * It seems to be due to address some special issue with that specific
- * frontend.
- */
-void dvb_frontend_reinitialise(struct dvb_frontend *fe);
-
-/**
- * dvb_frontend_sleep_until() - Sleep for the amount of time given by
- *                      add_usec parameter
- *
- * @waketime: pointer to &struct ktime_t
- * @add_usec: time to sleep, in microseconds
- *
- * This function is used to measure the time required for the
- * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl to work. It needs to be as precise
- * as possible, as it affects the detection of the dish tone command at the
- * satellite subsystem.
- *
- * Its used internally by the DVB frontend core, in order to emulate
- * FE_DISHNETWORK_SEND_LEGACY_CMD() using the &dvb_frontend_ops.set_voltage\(\)
- * callback.
- *
- * NOTE: it should not be used at the drivers, as the emulation for the
- * legacy callback is provided by the Kernel. The only situation where this
- * should be at the drivers is when there are some bugs at the hardware that
- * would prevent the core emulation to work. On such cases, the driver would
- * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and
- * calling this function directly.
- */
-void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec);
-
-#endif
diff --git a/drivers/media/dvb-core/dvb_math.c b/drivers/media/dvb-core/dvb_math.c
index a2e1810dd83a..dc90564d7f34 100644
--- a/drivers/media/dvb-core/dvb_math.c
+++ b/drivers/media/dvb-core/dvb_math.c
@@ -19,7 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/bug.h>
-#include "dvb_math.h"
+#include <media/dvb_math.h>
 
 static const unsigned short logtable[256] = {
 	0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7,
diff --git a/drivers/media/dvb-core/dvb_math.h b/drivers/media/dvb-core/dvb_math.h
deleted file mode 100644
index 8690ec42954d..000000000000
--- a/drivers/media/dvb-core/dvb_math.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * dvb-math provides some complex fixed-point math
- * operations shared between the dvb related stuff
- *
- * Copyright (C) 2006 Christoph Pfister (christophpfister@gmail.com)
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- */
-
-#ifndef __DVB_MATH_H
-#define __DVB_MATH_H
-
-#include <linux/types.h>
-
-/**
- * intlog2 - computes log2 of a value; the result is shifted left by 24 bits
- *
- * @value: The value (must be != 0)
- *
- * to use rational values you can use the following method:
- *
- *   intlog2(value) = intlog2(value * 2^x) - x * 2^24
- *
- * Some usecase examples:
- *
- *	intlog2(8) will give 3 << 24 = 3 * 2^24
- *
- *	intlog2(9) will give 3 << 24 + ... = 3.16... * 2^24
- *
- *	intlog2(1.5) = intlog2(3) - 2^24 = 0.584... * 2^24
- *
- *
- * return: log2(value) * 2^24
- */
-extern unsigned int intlog2(u32 value);
-
-/**
- * intlog10 - computes log10 of a value; the result is shifted left by 24 bits
- *
- * @value: The value (must be != 0)
- *
- * to use rational values you can use the following method:
- *
- *   intlog10(value) = intlog10(value * 10^x) - x * 2^24
- *
- * An usecase example:
- *
- *	intlog10(1000) will give 3 << 24 = 3 * 2^24
- *
- *   due to the implementation intlog10(1000) might be not exactly 3 * 2^24
- *
- * look at intlog2 for similar examples
- *
- * return: log10(value) * 2^24
- */
-extern unsigned int intlog10(u32 value);
-
-#endif
diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index fc0834f20eab..b6c7eec863b9 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -64,8 +64,8 @@
 #include <linux/mutex.h>
 #include <linux/sched.h>
 
-#include "dvb_demux.h"
-#include "dvb_net.h"
+#include <media/dvb_demux.h>
+#include <media/dvb_net.h>
 
 static inline __u32 iov_crc32( __u32 c, struct kvec *iov, unsigned int cnt )
 {
diff --git a/drivers/media/dvb-core/dvb_net.h b/drivers/media/dvb-core/dvb_net.h
deleted file mode 100644
index 1eae8bad7cc1..000000000000
--- a/drivers/media/dvb-core/dvb_net.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * dvb_net.h
- *
- * Copyright (C) 2001 Ralph Metzler for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _DVB_NET_H_
-#define _DVB_NET_H_
-
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include "dvbdev.h"
-
-#define DVB_NET_DEVICES_MAX 10
-
-#ifdef CONFIG_DVB_NET
-
-/**
- * struct dvb_net - describes a DVB network interface
- *
- * @dvbdev:		pointer to &struct dvb_device.
- * @device:		array of pointers to &struct net_device.
- * @state:		array of integers to each net device. A value
- *			different than zero means that the interface is
- *			in usage.
- * @exit:		flag to indicate when the device is being removed.
- * @demux:		pointer to &struct dmx_demux.
- * @ioctl_mutex:	protect access to this struct.
- *
- * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network
- * devices.
- */
-
-struct dvb_net {
-	struct dvb_device *dvbdev;
-	struct net_device *device[DVB_NET_DEVICES_MAX];
-	int state[DVB_NET_DEVICES_MAX];
-	unsigned int exit:1;
-	struct dmx_demux *demux;
-	struct mutex ioctl_mutex;
-};
-
-/**
- * dvb_net_init - nitializes a digital TV network device and registers it.
- *
- * @adap:	pointer to &struct dvb_adapter.
- * @dvbnet:	pointer to &struct dvb_net.
- * @dmxdemux:	pointer to &struct dmx_demux.
- */
-int dvb_net_init(struct dvb_adapter *adap, struct dvb_net *dvbnet,
-		  struct dmx_demux *dmxdemux);
-
-/**
- * dvb_net_release - releases a digital TV network device and unregisters it.
- *
- * @dvbnet:	pointer to &struct dvb_net.
- */
-void dvb_net_release(struct dvb_net *dvbnet);
-
-#else
-
-struct dvb_net {
-	struct dvb_device *dvbdev;
-};
-
-static inline void dvb_net_release(struct dvb_net *dvbnet)
-{
-}
-
-static inline int dvb_net_init(struct dvb_adapter *adap,
-			       struct dvb_net *dvbnet, struct dmx_demux *dmx)
-{
-	return 0;
-}
-
-#endif /* ifdef CONFIG_DVB_NET */
-
-#endif
diff --git a/drivers/media/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb-core/dvb_ringbuffer.c
index 53011629c9ad..4330b6fa4af2 100644
--- a/drivers/media/dvb-core/dvb_ringbuffer.c
+++ b/drivers/media/dvb-core/dvb_ringbuffer.c
@@ -29,7 +29,7 @@
 #include <linux/string.h>
 #include <linux/uaccess.h>
 
-#include "dvb_ringbuffer.h"
+#include <media/dvb_ringbuffer.h>
 
 #define PKT_READY 0
 #define PKT_DISPOSED 1
diff --git a/drivers/media/dvb-core/dvb_ringbuffer.h b/drivers/media/dvb-core/dvb_ringbuffer.h
deleted file mode 100644
index 8ed6bcc3a56e..000000000000
--- a/drivers/media/dvb-core/dvb_ringbuffer.h
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- *
- * dvb_ringbuffer.h: ring buffer implementation for the dvb driver
- *
- * Copyright (C) 2003 Oliver Endriss
- * Copyright (C) 2004 Andrew de Quincey
- *
- * based on code originally found in av7110.c & dvb_ci.c:
- * Copyright (C) 1999-2003 Ralph Metzler & Marcus Metzler
- *                         for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Lesser General Public License for more details.
- */
-
-#ifndef _DVB_RINGBUFFER_H_
-#define _DVB_RINGBUFFER_H_
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-
-/**
- * struct dvb_ringbuffer - Describes a ring buffer used at DVB framework
- *
- * @data: Area were the ringbuffer data is written
- * @size: size of the ringbuffer
- * @pread: next position to read
- * @pwrite: next position to write
- * @error: used by ringbuffer clients to indicate that an error happened.
- * @queue: Wait queue used by ringbuffer clients to indicate when buffer
- *         was filled
- * @lock: Spinlock used to protect the ringbuffer
- */
-struct dvb_ringbuffer {
-	u8               *data;
-	ssize_t           size;
-	ssize_t           pread;
-	ssize_t           pwrite;
-	int               error;
-
-	wait_queue_head_t queue;
-	spinlock_t        lock;
-};
-
-#define DVB_RINGBUFFER_PKTHDRSIZE 3
-
-/**
- * dvb_ringbuffer_init - initialize ring buffer, lock and queue
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @data: pointer to the buffer where the data will be stored
- * @len: bytes from ring buffer into @buf
- */
-extern void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data,
-				size_t len);
-
-/**
- * dvb_ringbuffer_empty - test whether buffer is empty
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- */
-extern int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf);
-
-/**
- * dvb_ringbuffer_free - returns the number of free bytes in the buffer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- *
- * Return: number of free bytes in the buffer
- */
-extern ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf);
-
-/**
- * dvb_ringbuffer_avail - returns the number of bytes waiting in the buffer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- *
- * Return: number of bytes waiting in the buffer
- */
-extern ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf);
-
-/**
- * dvb_ringbuffer_reset - resets the ringbuffer to initial state
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- *
- * Resets the read and write pointers to zero and flush the buffer.
- *
- * This counts as a read and write operation
- */
-extern void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf);
-
-/*
- * read routines & macros
- */
-
-/**
- * dvb_ringbuffer_flush - flush buffer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- */
-extern void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf);
-
-/**
- * dvb_ringbuffer_flush_spinlock_wakeup- flush buffer protected by spinlock
- *      and wake-up waiting task(s)
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- */
-extern void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf);
-
-/**
- * DVB_RINGBUFFER_PEEK - peek at byte @offs in the buffer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @offs: offset inside the ringbuffer
- */
-#define DVB_RINGBUFFER_PEEK(rbuf, offs)	\
-			((rbuf)->data[((rbuf)->pread + (offs)) % (rbuf)->size])
-
-/**
- * DVB_RINGBUFFER_SKIP - advance read ptr by @num bytes
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @num: number of bytes to advance
- */
-#define DVB_RINGBUFFER_SKIP(rbuf, num)	{\
-			(rbuf)->pread = ((rbuf)->pread + (num)) % (rbuf)->size;\
-}
-
-/**
- * dvb_ringbuffer_read_user - Reads a buffer into a user pointer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @buf: pointer to the buffer where the data will be stored
- * @len: bytes from ring buffer into @buf
- *
- * This variant assumes that the buffer is a memory at the userspace. So,
- * it will internally call copy_to_user().
- *
- * Return: number of bytes transferred or -EFAULT
- */
-extern ssize_t dvb_ringbuffer_read_user(struct dvb_ringbuffer *rbuf,
-				   u8 __user *buf, size_t len);
-
-/**
- * dvb_ringbuffer_read - Reads a buffer into a pointer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @buf: pointer to the buffer where the data will be stored
- * @len: bytes from ring buffer into @buf
- *
- * This variant assumes that the buffer is a memory at the Kernel space
- *
- * Return: number of bytes transferred or -EFAULT
- */
-extern void dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf,
-				   u8 *buf, size_t len);
-
-/*
- * write routines & macros
- */
-
-/**
- * DVB_RINGBUFFER_WRITE_BYTE - write single byte to ring buffer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @byte: byte to write
- */
-#define DVB_RINGBUFFER_WRITE_BYTE(rbuf, byte)	\
-			{ (rbuf)->data[(rbuf)->pwrite] = (byte); \
-			(rbuf)->pwrite = ((rbuf)->pwrite + 1) % (rbuf)->size; }
-
-/**
- * dvb_ringbuffer_write - Writes a buffer into the ringbuffer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @buf: pointer to the buffer where the data will be read
- * @len: bytes from ring buffer into @buf
- *
- * This variant assumes that the buffer is a memory at the Kernel space
- *
- * return: number of bytes transferred or -EFAULT
- */
-extern ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf,
-				    size_t len);
-
-/**
- * dvb_ringbuffer_write_user - Writes a buffer received via a user pointer
- *
- * @rbuf: pointer to struct dvb_ringbuffer
- * @buf: pointer to the buffer where the data will be read
- * @len: bytes from ring buffer into @buf
- *
- * This variant assumes that the buffer is a memory at the userspace. So,
- * it will internally call copy_from_user().
- *
- * Return: number of bytes transferred or -EFAULT
- */
-extern ssize_t dvb_ringbuffer_write_user(struct dvb_ringbuffer *rbuf,
-					 const u8 __user *buf, size_t len);
-
-/**
- * dvb_ringbuffer_pkt_write - Write a packet into the ringbuffer.
- *
- * @rbuf: Ringbuffer to write to.
- * @buf: Buffer to write.
- * @len: Length of buffer (currently limited to 65535 bytes max).
- *
- * Return: Number of bytes written, or -EFAULT, -ENOMEM, -EVINAL.
- */
-extern ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8 *buf,
-					size_t len);
-
-/**
- * dvb_ringbuffer_pkt_read_user - Read from a packet in the ringbuffer.
- *
- * @rbuf: Ringbuffer concerned.
- * @idx: Packet index as returned by dvb_ringbuffer_pkt_next().
- * @offset: Offset into packet to read from.
- * @buf: Destination buffer for data.
- * @len: Size of destination buffer.
- *
- * Return: Number of bytes read, or -EFAULT.
- *
- * .. note::
- *
- *    unlike dvb_ringbuffer_read(), this does **NOT** update the read pointer
- *    in the ringbuffer. You must use dvb_ringbuffer_pkt_dispose() to mark a
- *    packet as no longer required.
- */
-extern ssize_t dvb_ringbuffer_pkt_read_user(struct dvb_ringbuffer *rbuf,
-					    size_t idx,
-					    int offset, u8 __user *buf,
-					    size_t len);
-
-/**
- * dvb_ringbuffer_pkt_read - Read from a packet in the ringbuffer.
- * Note: unlike dvb_ringbuffer_read_user(), this DOES update the read pointer
- * in the ringbuffer.
- *
- * @rbuf: Ringbuffer concerned.
- * @idx: Packet index as returned by dvb_ringbuffer_pkt_next().
- * @offset: Offset into packet to read from.
- * @buf: Destination buffer for data.
- * @len: Size of destination buffer.
- *
- * Return: Number of bytes read, or -EFAULT.
- */
-extern ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx,
-				       int offset, u8 *buf, size_t len);
-
-/**
- * dvb_ringbuffer_pkt_dispose - Dispose of a packet in the ring buffer.
- *
- * @rbuf: Ring buffer concerned.
- * @idx: Packet index as returned by dvb_ringbuffer_pkt_next().
- */
-extern void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx);
-
-/**
- * dvb_ringbuffer_pkt_next - Get the index of the next packet in a ringbuffer.
- *
- * @rbuf: Ringbuffer concerned.
- * @idx: Previous packet index, or -1 to return the first packet index.
- * @pktlen: On success, will be updated to contain the length of the packet
- *          in bytes.
- * returns Packet index (if >=0), or -1 if no packets available.
- */
-extern ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf,
-				       size_t idx, size_t *pktlen);
-
-#endif /* _DVB_RINGBUFFER_H_ */
diff --git a/drivers/media/dvb-core/dvb_vb2.c b/drivers/media/dvb-core/dvb_vb2.c
index 68c59a497925..61c6ca4e87d5 100644
--- a/drivers/media/dvb-core/dvb_vb2.c
+++ b/drivers/media/dvb-core/dvb_vb2.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 
-#include "dvbdev.h"
-#include "dvb_vb2.h"
+#include <media/dvbdev.h>
+#include <media/dvb_vb2.h>
 
 #define DVB_V2_MAX_SIZE		(4096 * 188)
 
diff --git a/drivers/media/dvb-core/dvb_vb2.h b/drivers/media/dvb-core/dvb_vb2.h
deleted file mode 100644
index 7a529844c5e1..000000000000
--- a/drivers/media/dvb-core/dvb_vb2.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0
- *
- * dvb-vb2.h - DVB driver helper framework for streaming I/O
- *
- * Copyright (C) 2015 Samsung Electronics
- *
- * Author: jh1009.sung@samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#ifndef _DVB_VB2_H
-#define _DVB_VB2_H
-
-#include <linux/mutex.h>
-#include <linux/poll.h>
-#include <linux/dvb/dmx.h>
-#include <media/videobuf2-core.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/videobuf2-vmalloc.h>
-
-enum dvb_buf_type {
-	DVB_BUF_TYPE_CAPTURE        = 1,
-	DVB_BUF_TYPE_OUTPUT         = 2,
-};
-
-#define DVB_VB2_STATE_NONE (0x0)
-#define DVB_VB2_STATE_INIT (0x1)
-#define DVB_VB2_STATE_REQBUFS (0x2)
-#define DVB_VB2_STATE_STREAMON (0x4)
-
-#define DVB_VB2_NAME_MAX (20)
-
-struct dvb_buffer {
-	struct vb2_buffer	vb;
-	struct list_head	list;
-};
-
-struct dvb_vb2_ctx {
-	struct vb2_queue	vb_q;
-	struct mutex		mutex;
-	spinlock_t		slock;
-	struct list_head	dvb_q;
-	struct dvb_buffer	*buf;
-	int	offset;
-	int	remain;
-	int	state;
-	int	buf_siz;
-	int	buf_cnt;
-	int	nonblocking;
-	char	name[DVB_VB2_NAME_MAX + 1];
-};
-
-int dvb_vb2_stream_on(struct dvb_vb2_ctx *ctx);
-int dvb_vb2_stream_off(struct dvb_vb2_ctx *ctx);
-#ifndef DVB_MMAP
-static inline int dvb_vb2_init(struct dvb_vb2_ctx *ctx,
-			       const char *name, int non_blocking)
-{
-	return 0;
-};
-static inline int dvb_vb2_release(struct dvb_vb2_ctx *ctx)
-{
-	return 0;
-};
-#define dvb_vb2_is_streaming(ctx) (0)
-#define dvb_vb2_fill_buffer(ctx, file, wait) (0)
-
-static inline unsigned int dvb_vb2_poll(struct dvb_vb2_ctx *ctx,
-					struct file *file,
-					poll_table *wait)
-{
-	return 0;
-}
-#else
-int dvb_vb2_init(struct dvb_vb2_ctx *ctx, const char *name, int non_blocking);
-int dvb_vb2_release(struct dvb_vb2_ctx *ctx);
-int dvb_vb2_is_streaming(struct dvb_vb2_ctx *ctx);
-int dvb_vb2_fill_buffer(struct dvb_vb2_ctx *ctx,
-			const unsigned char *src, int len);
-unsigned int dvb_vb2_poll(struct dvb_vb2_ctx *ctx, struct file *file,
-			  poll_table *wait);
-#endif
-
-
-int dvb_vb2_reqbufs(struct dvb_vb2_ctx *ctx, struct dmx_requestbuffers *req);
-int dvb_vb2_querybuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b);
-int dvb_vb2_expbuf(struct dvb_vb2_ctx *ctx, struct dmx_exportbuffer *exp);
-int dvb_vb2_qbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b);
-int dvb_vb2_dqbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b);
-int dvb_vb2_mmap(struct dvb_vb2_ctx *ctx, struct vm_area_struct *vma);
-
-#endif /* _DVB_VB2_H */
diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 060c60ddfcc3..60e9c2ba26be 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -30,7 +30,7 @@
 #include <linux/fs.h>
 #include <linux/cdev.h>
 #include <linux/mutex.h>
-#include "dvbdev.h"
+#include <media/dvbdev.h>
 
 /* Due to enum tuner_pad_index */
 #include <media/tuner.h>
diff --git a/drivers/media/dvb-core/dvbdev.h b/drivers/media/dvb-core/dvbdev.h
deleted file mode 100644
index bbc1c20c0529..000000000000
--- a/drivers/media/dvb-core/dvbdev.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * dvbdev.h
- *
- * Copyright (C) 2000 Ralph Metzler & Marcus Metzler
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Lesser Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _DVBDEV_H_
-#define _DVBDEV_H_
-
-#include <linux/types.h>
-#include <linux/poll.h>
-#include <linux/fs.h>
-#include <linux/list.h>
-#include <media/media-device.h>
-
-#define DVB_MAJOR 212
-
-#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0
-  #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
-#else
-  #define DVB_MAX_ADAPTERS 16
-#endif
-
-#define DVB_UNSET (-1)
-
-/* List of DVB device types */
-
-/**
- * enum dvb_device_type - type of the Digital TV device
- *
- * @DVB_DEVICE_SEC:		Digital TV standalone Common Interface (CI)
- * @DVB_DEVICE_FRONTEND:	Digital TV frontend.
- * @DVB_DEVICE_DEMUX:		Digital TV demux.
- * @DVB_DEVICE_DVR:		Digital TV digital video record (DVR).
- * @DVB_DEVICE_CA:		Digital TV Conditional Access (CA).
- * @DVB_DEVICE_NET:		Digital TV network.
- *
- * @DVB_DEVICE_VIDEO:		Digital TV video decoder.
- *				Deprecated. Used only on av7110-av.
- * @DVB_DEVICE_AUDIO:		Digital TV audio decoder.
- *				Deprecated. Used only on av7110-av.
- * @DVB_DEVICE_OSD:		Digital TV On Screen Display (OSD).
- *				Deprecated. Used only on av7110.
- */
-enum dvb_device_type {
-	DVB_DEVICE_SEC,
-	DVB_DEVICE_FRONTEND,
-	DVB_DEVICE_DEMUX,
-	DVB_DEVICE_DVR,
-	DVB_DEVICE_CA,
-	DVB_DEVICE_NET,
-
-	DVB_DEVICE_VIDEO,
-	DVB_DEVICE_AUDIO,
-	DVB_DEVICE_OSD,
-};
-
-#define DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr) \
-	static short adapter_nr[] = \
-		{[0 ... (DVB_MAX_ADAPTERS - 1)] = DVB_UNSET }; \
-	module_param_array(adapter_nr, short, NULL, 0444); \
-	MODULE_PARM_DESC(adapter_nr, "DVB adapter numbers")
-
-struct dvb_frontend;
-
-/**
- * struct dvb_adapter - represents a Digital TV adapter using Linux DVB API
- *
- * @num:		Number of the adapter
- * @list_head:		List with the DVB adapters
- * @device_list:	List with the DVB devices
- * @name:		Name of the adapter
- * @proposed_mac:	proposed MAC address for the adapter
- * @priv:		private data
- * @device:		pointer to struct device
- * @module:		pointer to struct module
- * @mfe_shared:		mfe shared: indicates mutually exclusive frontends
- *			Thie usage of this flag is currently deprecated
- * @mfe_dvbdev:		Frontend device in use, in the case of MFE
- * @mfe_lock:		Lock to prevent using the other frontends when MFE is
- *			used.
- * @mdev:		pointer to struct media_device, used when the media
- *			controller is used.
- * @conn:		RF connector. Used only if the device has no separate
- *			tuner.
- * @conn_pads:		pointer to struct media_pad associated with @conn;
- */
-struct dvb_adapter {
-	int num;
-	struct list_head list_head;
-	struct list_head device_list;
-	const char *name;
-	u8 proposed_mac [6];
-	void* priv;
-
-	struct device *device;
-
-	struct module *module;
-
-	int mfe_shared;			/* indicates mutually exclusive frontends */
-	struct dvb_device *mfe_dvbdev;	/* frontend device in use */
-	struct mutex mfe_lock;		/* access lock for thread creation */
-
-#if defined(CONFIG_MEDIA_CONTROLLER_DVB)
-	struct media_device *mdev;
-	struct media_entity *conn;
-	struct media_pad *conn_pads;
-#endif
-};
-
-/**
- * struct dvb_device - represents a DVB device node
- *
- * @list_head:	List head with all DVB devices
- * @fops:	pointer to struct file_operations
- * @adapter:	pointer to the adapter that holds this device node
- * @type:	type of the device, as defined by &enum dvb_device_type.
- * @minor:	devnode minor number. Major number is always DVB_MAJOR.
- * @id:		device ID number, inside the adapter
- * @readers:	Initialized by the caller. Each call to open() in Read Only mode
- *		decreases this counter by one.
- * @writers:	Initialized by the caller. Each call to open() in Read/Write
- *		mode decreases this counter by one.
- * @users:	Initialized by the caller. Each call to open() in any mode
- *		decreases this counter by one.
- * @wait_queue:	wait queue, used to wait for certain events inside one of
- *		the DVB API callers
- * @kernel_ioctl: callback function used to handle ioctl calls from userspace.
- * @name:	Name to be used for the device at the Media Controller
- * @entity:	pointer to struct media_entity associated with the device node
- * @pads:	pointer to struct media_pad associated with @entity;
- * @priv:	private data
- * @intf_devnode: Pointer to media_intf_devnode. Used by the dvbdev core to
- *		store the MC device node interface
- * @tsout_num_entities: Number of Transport Stream output entities
- * @tsout_entity: array with MC entities associated to each TS output node
- * @tsout_pads: array with the source pads for each @tsout_entity
- *
- * This structure is used by the DVB core (frontend, CA, net, demux) in
- * order to create the device nodes. Usually, driver should not initialize
- * this struct diretly.
- */
-struct dvb_device {
-	struct list_head list_head;
-	const struct file_operations *fops;
-	struct dvb_adapter *adapter;
-	enum dvb_device_type type;
-	int minor;
-	u32 id;
-
-	/* in theory, 'users' can vanish now,
-	   but I don't want to change too much now... */
-	int readers;
-	int writers;
-	int users;
-
-	wait_queue_head_t	  wait_queue;
-	/* don't really need those !? -- FIXME: use video_usercopy  */
-	int (*kernel_ioctl)(struct file *file, unsigned int cmd, void *arg);
-
-	/* Needed for media controller register/unregister */
-#if defined(CONFIG_MEDIA_CONTROLLER_DVB)
-	const char *name;
-
-	/* Allocated and filled inside dvbdev.c */
-	struct media_intf_devnode *intf_devnode;
-
-	unsigned tsout_num_entities;
-	struct media_entity *entity, *tsout_entity;
-	struct media_pad *pads, *tsout_pads;
-#endif
-
-	void *priv;
-};
-
-/**
- * dvb_register_adapter - Registers a new DVB adapter
- *
- * @adap:	pointer to struct dvb_adapter
- * @name:	Adapter's name
- * @module:	initialized with THIS_MODULE at the caller
- * @device:	pointer to struct device that corresponds to the device driver
- * @adapter_nums: Array with a list of the numbers for @dvb_register_adapter;
- * 		to select among them. Typically, initialized with:
- *		DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nums)
- */
-int dvb_register_adapter(struct dvb_adapter *adap, const char *name,
-			 struct module *module, struct device *device,
-			 short *adapter_nums);
-
-/**
- * dvb_unregister_adapter - Unregisters a DVB adapter
- *
- * @adap:	pointer to struct dvb_adapter
- */
-int dvb_unregister_adapter(struct dvb_adapter *adap);
-
-/**
- * dvb_register_device - Registers a new DVB device
- *
- * @adap:	pointer to struct dvb_adapter
- * @pdvbdev:	pointer to the place where the new struct dvb_device will be
- *		stored
- * @template:	Template used to create &pdvbdev;
- * @priv:	private data
- * @type:	type of the device, as defined by &enum dvb_device_type.
- * @demux_sink_pads: Number of demux outputs, to be used to create the TS
- *		outputs via the Media Controller.
- */
-int dvb_register_device(struct dvb_adapter *adap,
-			struct dvb_device **pdvbdev,
-			const struct dvb_device *template,
-			void *priv,
-			enum dvb_device_type type,
-			int demux_sink_pads);
-
-/**
- * dvb_remove_device - Remove a registered DVB device
- *
- * This does not free memory.  To do that, call dvb_free_device().
- *
- * @dvbdev:	pointer to struct dvb_device
- */
-void dvb_remove_device(struct dvb_device *dvbdev);
-
-/**
- * dvb_free_device - Free memory occupied by a DVB device.
- *
- * Call dvb_unregister_device() before calling this function.
- *
- * @dvbdev:	pointer to struct dvb_device
- */
-void dvb_free_device(struct dvb_device *dvbdev);
-
-/**
- * dvb_unregister_device - Unregisters a DVB device
- *
- * This is a combination of dvb_remove_device() and dvb_free_device().
- * Using this function is usually a mistake, and is often an indicator
- * for a use-after-free bug (when a userspace process keeps a file
- * handle to a detached device).
- *
- * @dvbdev:	pointer to struct dvb_device
- */
-void dvb_unregister_device(struct dvb_device *dvbdev);
-
-#ifdef CONFIG_MEDIA_CONTROLLER_DVB
-/**
- * dvb_create_media_graph - Creates media graph for the Digital TV part of the
- * 				device.
- *
- * @adap:			pointer to &struct dvb_adapter
- * @create_rf_connector:	if true, it creates the RF connector too
- *
- * This function checks all DVB-related functions at the media controller
- * entities and creates the needed links for the media graph. It is
- * capable of working with multiple tuners or multiple frontends, but it
- * won't create links if the device has multiple tuners and multiple frontends
- * or if the device has multiple muxes. In such case, the caller driver should
- * manually create the remaining links.
- */
-__must_check int dvb_create_media_graph(struct dvb_adapter *adap,
-					bool create_rf_connector);
-
-/**
- * dvb_register_media_controller - registers a media controller at DVB adapter
- *
- * @adap:			pointer to &struct dvb_adapter
- * @mdev:			pointer to &struct media_device
- */
-static inline void dvb_register_media_controller(struct dvb_adapter *adap,
-						 struct media_device *mdev)
-{
-	adap->mdev = mdev;
-}
-
-/**
- * dvb_get_media_controller - gets the associated media controller
- *
- * @adap:			pointer to &struct dvb_adapter
- */
-static inline struct media_device
-*dvb_get_media_controller(struct dvb_adapter *adap)
-{
-	return adap->mdev;
-}
-#else
-static inline
-int dvb_create_media_graph(struct dvb_adapter *adap,
-			   bool create_rf_connector)
-{
-	return 0;
-};
-#define dvb_register_media_controller(a, b) {}
-#define dvb_get_media_controller(a) NULL
-#endif
-
-/**
- * dvb_generic_open - Digital TV open function, used by DVB devices
- *
- * @inode: pointer to &struct inode.
- * @file: pointer to &struct file.
- *
- * Checks if a DVB devnode is still valid, and if the permissions are
- * OK and increment negative use count.
- */
-int dvb_generic_open(struct inode *inode, struct file *file);
-
-/**
- * dvb_generic_close - Digital TV close function, used by DVB devices
- *
- * @inode: pointer to &struct inode.
- * @file: pointer to &struct file.
- *
- * Checks if a DVB devnode is still valid, and if the permissions are
- * OK and decrement negative use count.
- */
-int dvb_generic_release(struct inode *inode, struct file *file);
-
-/**
- * dvb_generic_ioctl - Digital TV close function, used by DVB devices
- *
- * @file: pointer to &struct file.
- * @cmd: Ioctl name.
- * @arg: Ioctl argument.
- *
- * Checks if a DVB devnode and struct dvbdev.kernel_ioctl is still valid.
- * If so, calls dvb_usercopy().
- */
-long dvb_generic_ioctl(struct file *file,
-		       unsigned int cmd, unsigned long arg);
-
-/**
- * dvb_usercopy - copies data from/to userspace memory when an ioctl is
- *      issued.
- *
- * @file: Pointer to struct &file.
- * @cmd: Ioctl name.
- * @arg: Ioctl argument.
- * @func: function that will actually handle the ioctl
- *
- * Ancillary function that uses ioctl direction and size to copy from
- * userspace. Then, it calls @func, and, if needed, data is copied back
- * to userspace.
- */
-int dvb_usercopy(struct file *file, unsigned int cmd, unsigned long arg,
-		 int (*func)(struct file *file, unsigned int cmd, void *arg));
-
-/** generic DVB attach function. */
-#ifdef CONFIG_MEDIA_ATTACH
-
-/**
- * dvb_attach - attaches a DVB frontend into the DVB core.
- *
- * @FUNCTION:	function on a frontend module to be called.
- * @ARGS...:	@FUNCTION arguments.
- *
- * This ancillary function loads a frontend module in runtime and runs
- * the @FUNCTION function there, with @ARGS.
- * As it increments symbol usage cont, at unregister, dvb_detach()
- * should be called.
- */
-#define dvb_attach(FUNCTION, ARGS...) ({ \
-	void *__r = NULL; \
-	typeof(&FUNCTION) __a = symbol_request(FUNCTION); \
-	if (__a) { \
-		__r = (void *) __a(ARGS); \
-		if (__r == NULL) \
-			symbol_put(FUNCTION); \
-	} else { \
-		printk(KERN_ERR "DVB: Unable to find symbol "#FUNCTION"()\n"); \
-	} \
-	__r; \
-})
-
-/**
- * dvb_detach - detaches a DVB frontend loaded via dvb_attach()
- *
- * @FUNC:	attach function
- *
- * Decrements usage count for a function previously called via dvb_attach().
- */
-
-#define dvb_detach(FUNC)	symbol_put_addr(FUNC)
-
-#else
-#define dvb_attach(FUNCTION, ARGS...) ({ \
-	FUNCTION(ARGS); \
-})
-
-#define dvb_detach(FUNC)	{}
-
-#endif
-
-#endif /* #ifndef _DVBDEV_H_ */