Merge 5.14-rc6 into staging-next

We need the IIO fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 10 insertions, 8 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 2f0c0d512ae7..a0e9061f6d6b 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -232,6 +232,7 @@ config DMARD10
 
 config FXLS8962AF
 	tristate
+	depends on I2C || !I2C # cannot be built-in for modular I2C
 
 config FXLS8962AF_I2C
 	tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer I2C Driver"
@@ -248,6 +249,7 @@ config FXLS8962AF_I2C
 config FXLS8962AF_SPI
 	tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer SPI Driver"
 	depends on SPI
+	depends on I2C || !I2C
 	select FXLS8962AF
 	select REGMAP_SPI
 	help
diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
index 078d87865fde..0019f1ea7df2 100644
--- a/drivers/iio/accel/fxls8962af-core.c
+++ b/drivers/iio/accel/fxls8962af-core.c
@@ -637,7 +637,7 @@ static int fxls8962af_i2c_raw_read_errata3(struct fxls8962af_data *data,
 			return ret;
 	}
 
-	return ret;
+	return 0;
 }
 
 static int fxls8962af_fifo_transfer(struct fxls8962af_data *data,
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index 6ef09609be9f..f9c8385c72d3 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -664,8 +664,8 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
 
 	adc_period = adc->auto_conversion_period;
 	for (i = 0; i < 16; ++i) {
-		if (((1000 * (1 << i)) / 32) < adc_period)
-			continue;
+		if (((1000 * (1 << i)) / 32) >= adc_period)
+			break;
 	}
 	if (i > 0)
 		i--;
diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
index 2383eacada87..a2b83f0bd526 100644
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -568,7 +568,6 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	st->ring_xfer.tx_buf = &st->tx_buf[0];
 	st->ring_xfer.rx_buf = &st->rx_buf[0];
 	/* len will be set later */
-	st->ring_xfer.cs_change = true;
 
 	spi_message_add_tail(&st->ring_xfer, &st->ring_msg);
 
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index 2a957f19048e..9e0fce917ce4 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -25,6 +25,8 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 
+#include <linux/time.h>
+
 #define HDC100X_REG_TEMP			0x00
 #define HDC100X_REG_HUMIDITY			0x01
 
@@ -166,7 +168,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
 				   struct iio_chan_spec const *chan)
 {
 	struct i2c_client *client = data->client;
-	int delay = data->adc_int_us[chan->address];
+	int delay = data->adc_int_us[chan->address] + 1*USEC_PER_MSEC;
 	int ret;
 	__be16 val;
 
@@ -316,7 +318,7 @@ static irqreturn_t hdc100x_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct hdc100x_data *data = iio_priv(indio_dev);
 	struct i2c_client *client = data->client;
-	int delay = data->adc_int_us[0] + data->adc_int_us[1];
+	int delay = data->adc_int_us[0] + data->adc_int_us[1] + 2*USEC_PER_MSEC;
 	int ret;
 
 	/* dual read starts at temp register */
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index a5b421f42287..b9a06ca29bee 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -411,12 +411,11 @@ int __adis_initial_startup(struct adis *adis)
 	int ret;
 
 	/* check if the device has rst pin low */
-	gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_ASIS);
+	gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(gpio))
 		return PTR_ERR(gpio);
 
 	if (gpio) {
-		gpiod_set_value_cansleep(gpio, 1);
 		msleep(10);
 		/* bring device out of reset */
 		gpiod_set_value_cansleep(gpio, 0);