Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull i2c embedded fixes from Wolfram Sang:
 "The last bunch of (typical) i2c-embedded driver fixes for 3.6.

  Also update the MAINTAINERS file to point to my tree since people keep
  asking where to find their patches."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: algo: pca: Fix mode selection for PCA9665
  MAINTAINERS: fix tree for current i2c-embedded development
  i2c: mxs: correctly setup speed for non devicetree
  i2c: pnx: Fix read transactions of >= 2 bytes
  i2c: pnx: Fix bit definitions

3 files changed, 40 insertions, 32 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 73133b1063f0..6f5f98d69af7 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -476,17 +476,17 @@ static int pca_init(struct i2c_adapter *adap)
 		/* To avoid integer overflow, use clock/100 for calculations */
 		clock = pca_clock(pca_data) / 100;
 
-		if (pca_data->i2c_clock > 10000) {
+		if (pca_data->i2c_clock > 1000000) {
 			mode = I2C_PCA_MODE_TURBO;
 			min_tlow = 14;
 			min_thi  = 5;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 4000) {
+		} else if (pca_data->i2c_clock > 400000) {
 			mode = I2C_PCA_MODE_FASTP;
 			min_tlow = 17;
 			min_thi  = 9;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 1000) {
+		} else if (pca_data->i2c_clock > 100000) {
 			mode = I2C_PCA_MODE_FAST;
 			min_tlow = 44;
 			min_thi  = 20;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 088c5c1ed17d..51f05b8520ed 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -365,10 +365,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
 	struct device_node *node = dev->of_node;
 	int ret;
 
-	if (!node)
-		return -EINVAL;
-
-	i2c->speed = &mxs_i2c_95kHz_config;
 	ret = of_property_read_u32(node, "clock-frequency", &speed);
 	if (ret)
 		dev_warn(dev, "No I2C speed selected, using 100kHz\n");
@@ -419,10 +415,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
 		return err;
 
 	i2c->dev = dev;
+	i2c->speed = &mxs_i2c_95kHz_config;
 
-	err = mxs_i2c_get_ofdata(i2c);
-	if (err)
-		return err;
+	if (dev->of_node) {
+		err = mxs_i2c_get_ofdata(i2c);
+		if (err)
+			return err;
+	}
 
 	platform_set_drvdata(pdev, i2c);
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d54416770b0..8488bddfe465 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -48,8 +48,9 @@ enum {
 	mcntrl_afie = 0x00000002,
 	mcntrl_naie = 0x00000004,
 	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
+	mcntrl_drsie = 0x00000010,
+	mcntrl_rffie = 0x00000020,
+	mcntrl_daie = 0x00000040,
 	mcntrl_tffie = 0x00000080,
 	mcntrl_reset = 0x00000100,
 	mcntrl_cdbmode = 0x00000400,
@@ -290,31 +291,37 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 	 * or we didn't 'ask' for it yet.
 	 */
 	if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
-		dev_dbg(&alg_data->adapter.dev,
-			"%s(): Write dummy data to fill Rx-fifo...\n",
-			__func__);
+		/* 'Asking' is done asynchronously, e.g. dummy TX of several
+		 * bytes is done before the first actual RX arrives in FIFO.
+		 * Therefore, ordered bytes (via TX) are counted separately.
+		 */
+		if (alg_data->mif.order) {
+			dev_dbg(&alg_data->adapter.dev,
+				"%s(): Write dummy data to fill Rx-fifo...\n",
+				__func__);
 
-		if (alg_data->mif.len == 1) {
-			/* Last byte, do not acknowledge next rcv. */
-			val |= stop_bit;
+			if (alg_data->mif.order == 1) {
+				/* Last byte, do not acknowledge next rcv. */
+				val |= stop_bit;
+
+				/*
+				 * Enable interrupt RFDAIE (data in Rx fifo),
+				 * and disable DRMIE (need data for Tx)
+				 */
+				ctl = ioread32(I2C_REG_CTL(alg_data));
+				ctl |= mcntrl_rffie | mcntrl_daie;
+				ctl &= ~mcntrl_drmie;
+				iowrite32(ctl, I2C_REG_CTL(alg_data));
+			}
 
 			/*
-			 * Enable interrupt RFDAIE (data in Rx fifo),
-			 * and disable DRMIE (need data for Tx)
+			 * Now we'll 'ask' for data:
+			 * For each byte we want to receive, we must
+			 * write a (dummy) byte to the Tx-FIFO.
 			 */
-			ctl = ioread32(I2C_REG_CTL(alg_data));
-			ctl |= mcntrl_rffie | mcntrl_daie;
-			ctl &= ~mcntrl_drmie;
-			iowrite32(ctl, I2C_REG_CTL(alg_data));
+			iowrite32(val, I2C_REG_TX(alg_data));
+			alg_data->mif.order--;
 		}
-
-		/*
-		 * Now we'll 'ask' for data:
-		 * For each byte we want to receive, we must
-		 * write a (dummy) byte to the Tx-FIFO.
-		 */
-		iowrite32(val, I2C_REG_TX(alg_data));
-
 		return 0;
 	}
 
@@ -514,6 +521,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
 		alg_data->mif.buf = pmsg->buf;
 		alg_data->mif.len = pmsg->len;
+		alg_data->mif.order = pmsg->len;
 		alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
 			I2C_SMBUS_READ : I2C_SMBUS_WRITE;
 		alg_data->mif.ret = 0;
@@ -566,6 +574,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	/* Cleanup to be sure... */
 	alg_data->mif.buf = NULL;
 	alg_data->mif.len = 0;
+	alg_data->mif.order = 0;
 
 	dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));