Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

50 files changed, 656 insertions, 431 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index dcdaf8e675bf..2b9a8f54bb2c 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -109,13 +109,13 @@ static void pca_stop(struct i2c_algo_pca_data *adap)
  * returns after the address has been sent
  */
 static int pca_address(struct i2c_algo_pca_data *adap,
-			struct i2c_msg *msg)
+		       struct i2c_msg *msg)
 {
 	int sta = pca_get_con(adap);
 	int addr;
 
-	addr = ( (0x7f & msg->addr) << 1 );
-	if (msg->flags & I2C_M_RD )
+	addr = ((0x7f & msg->addr) << 1);
+	if (msg->flags & I2C_M_RD)
 		addr |= 1;
 	DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n",
 	     msg->addr, msg->flags & I2C_M_RD ? 'R' : 'W', addr);
@@ -134,7 +134,7 @@ static int pca_address(struct i2c_algo_pca_data *adap,
  * Returns after the byte has been transmitted
  */
 static int pca_tx_byte(struct i2c_algo_pca_data *adap,
-			__u8 b)
+		       __u8 b)
 {
 	int sta = pca_get_con(adap);
 	DEB2("=== WRITE %#04x\n", b);
@@ -164,13 +164,13 @@ static void pca_rx_byte(struct i2c_algo_pca_data *adap,
  * Returns after next byte has arrived.
  */
 static int pca_rx_ack(struct i2c_algo_pca_data *adap,
-		       int ack)
+		      int ack)
 {
 	int sta = pca_get_con(adap);
 
 	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI|I2C_PCA_CON_AA);
 
-	if ( ack )
+	if (ack)
 		sta |= I2C_PCA_CON_AA;
 
 	pca_set_con(adap, sta);
@@ -178,12 +178,12 @@ static int pca_rx_ack(struct i2c_algo_pca_data *adap,
 }
 
 static int pca_xfer(struct i2c_adapter *i2c_adap,
-                    struct i2c_msg *msgs,
-                    int num)
+		    struct i2c_msg *msgs,
+		    int num)
 {
-        struct i2c_algo_pca_data *adap = i2c_adap->algo_data;
-        struct i2c_msg *msg = NULL;
-        int curmsg;
+	struct i2c_algo_pca_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *msg = NULL;
+	int curmsg;
 	int numbytes = 0;
 	int state;
 	int ret;
@@ -202,21 +202,21 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
 	DEB1("{{{ XFER %d messages\n", num);
 
-	if (i2c_debug>=2) {
+	if (i2c_debug >= 2) {
 		for (curmsg = 0; curmsg < num; curmsg++) {
 			int addr, i;
 			msg = &msgs[curmsg];
 
 			addr = (0x7f & msg->addr) ;
 
-			if (msg->flags & I2C_M_RD )
+			if (msg->flags & I2C_M_RD)
 				printk(KERN_INFO "    [%02d] RD %d bytes from %#02x [%#02x, ...]\n",
-				       curmsg, msg->len, addr, (addr<<1) | 1);
+				       curmsg, msg->len, addr, (addr << 1) | 1);
 			else {
 				printk(KERN_INFO "    [%02d] WR %d bytes to %#02x [%#02x%s",
-				       curmsg, msg->len, addr, addr<<1,
+				       curmsg, msg->len, addr, addr << 1,
 				       msg->len == 0 ? "" : ", ");
-				for(i=0; i < msg->len; i++)
+				for (i = 0; i < msg->len; i++)
 					printk("%#04x%s", msg->buf[i], i == msg->len - 1 ? "" : ", ");
 				printk("]\n");
 			}
@@ -305,7 +305,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 			goto out;
 
 		case 0x58: /* Data byte has been received; NOT ACK has been returned */
-			if ( numbytes == msg->len - 1 ) {
+			if (numbytes == msg->len - 1) {
 				pca_rx_byte(adap, &msg->buf[numbytes], 0);
 				curmsg++; numbytes = 0;
 				if (curmsg == num)
@@ -352,7 +352,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
 static u32 pca_func(struct i2c_adapter *adap)
 {
-        return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }
 
 static const struct i2c_algorithm pca_algo = {
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 9c6170cd9aac..87ab0568bb0e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -564,7 +564,7 @@ config I2C_STU300
 
 config I2C_VERSATILE
 	tristate "ARM Versatile/Realview I2C bus support"
-	depends on ARCH_VERSATILE || ARCH_REALVIEW
+	depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
 	select I2C_ALGOBIT
 	help
 	  Say yes if you want to support the I2C serial bus on ARMs Versatile
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index bd8f1e4d9e6c..906a3ca50db6 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -60,7 +60,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 
 /* ALI1535 SMBus address offsets */
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 659f63f5e4af..b14f6d68221d 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -67,7 +67,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* ALI15X3 SMBus address offsets */
 #define SMBHSTSTS	(0 + ali15x3_smba)
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index c5a9fa488e7f..03bcd07c4697 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -43,7 +43,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* AMD756 SMBus address offsets */
 #define SMB_ADDR_OFFSET		0xE0
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 2fbef27b6cd6..af1e5e254b7b 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -18,7 +18,7 @@
 #include <linux/delay.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>");
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 06e1ecb4919f..305c07504f7e 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -23,8 +23,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <mach/at91_twi.h>
 #include <mach/board.h>
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index f1e14dd590c9..fb26e5c67515 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -25,8 +25,6 @@
 #include <asm/portmux.h>
 #include <asm/irq.h>
 
-#define POLL_TIMEOUT       (2 * HZ)
-
 /* SMBus mode*/
 #define TWI_I2C_MODE_STANDARD		1
 #define TWI_I2C_MODE_STANDARDSUB	2
@@ -44,8 +42,6 @@ struct bfin_twi_iface {
 	int			cur_mode;
 	int			manual_stop;
 	int			result;
-	int			timeout_count;
-	struct timer_list	timeout_timer;
 	struct i2c_adapter	adap;
 	struct completion	complete;
 	struct i2c_msg 		*pmsg;
@@ -85,14 +81,15 @@ static const u16 pin_req[2][3] = {
 	{P_TWI1_SCL, P_TWI1_SDA, 0},
 };
 
-static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
+static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
+					unsigned short twi_int_status)
 {
-	unsigned short twi_int_status = read_INT_STAT(iface);
 	unsigned short mast_stat = read_MASTER_STAT(iface);
 
 	if (twi_int_status & XMTSERV) {
 		/* Transmit next data */
 		if (iface->writeNum > 0) {
+			SSYNC();
 			write_XMT_DATA8(iface, *(iface->transPtr++));
 			iface->writeNum--;
 		}
@@ -114,10 +111,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
 		}
-		SSYNC();
-		/* Clear status */
-		write_INT_STAT(iface, XMTSERV);
-		SSYNC();
 	}
 	if (twi_int_status & RCVSERV) {
 		if (iface->readNum > 0) {
@@ -139,7 +132,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 		} else if (iface->manual_stop) {
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) | STOP);
-			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 		           iface->cur_msg + 1 < iface->msg_num) {
 			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
@@ -148,44 +140,37 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			else
 				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
-			SSYNC();
 		}
-		/* Clear interrupt source */
-		write_INT_STAT(iface, RCVSERV);
-		SSYNC();
 	}
 	if (twi_int_status & MERR) {
-		write_INT_STAT(iface, MERR);
 		write_INT_MASK(iface, 0);
 		write_MASTER_STAT(iface, 0x3e);
 		write_MASTER_CTL(iface, 0);
-		SSYNC();
 		iface->result = -EIO;
-		/* if both err and complete int stats are set, return proper
-		 * results.
+
+		if (mast_stat & LOSTARB)
+			dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
+		if (mast_stat & ANAK)
+			dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
+		if (mast_stat & DNAK)
+			dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
+		if (mast_stat & BUFRDERR)
+			dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
+		if (mast_stat & BUFWRERR)
+			dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
+
+		/* If it is a quick transfer, only address without data,
+		 * not an err, return 1.
 		 */
-		if (twi_int_status & MCOMP) {
-			write_INT_STAT(iface, MCOMP);
-			write_INT_MASK(iface, 0);
-			write_MASTER_CTL(iface, 0);
-			SSYNC();
-			/* If it is a quick transfer, only address bug no data,
-			 * not an err, return 1.
-			 */
-			if (iface->writeNum == 0 && (mast_stat & BUFRDERR))
-				iface->result = 1;
-			/* If address not acknowledged return -1,
-			 * else return 0.
-			 */
-			else if (!(mast_stat & ANAK))
-				iface->result = 0;
-		}
+		if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
+			iface->transPtr == NULL &&
+			(twi_int_status & MCOMP) && (mast_stat & DNAK))
+			iface->result = 1;
+
 		complete(&iface->complete);
 		return;
 	}
 	if (twi_int_status & MCOMP) {
-		write_INT_STAT(iface, MCOMP);
-		SSYNC();
 		if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
 			if (iface->readNum == 0) {
 				/* set the read number to 1 and ask for manual
@@ -207,7 +192,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 				iface->cur_msg+1 < iface->msg_num) {
 			iface->cur_msg++;
@@ -226,7 +210,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 					write_XMT_DATA8(iface,
 						*(iface->transPtr++));
 					iface->writeNum--;
-					SSYNC();
 				}
 			}
 
@@ -244,15 +227,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			SSYNC();
 		} else {
 			iface->result = 1;
 			write_INT_MASK(iface, 0);
 			write_MASTER_CTL(iface, 0);
-			SSYNC();
-			complete(&iface->complete);
 		}
 	}
+	complete(&iface->complete);
 }
 
 /* Interrupt handler */
@@ -260,38 +241,26 @@ static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
 {
 	struct bfin_twi_iface *iface = dev_id;
 	unsigned long flags;
+	unsigned short twi_int_status;
 
 	spin_lock_irqsave(&iface->lock, flags);
-	del_timer(&iface->timeout_timer);
-	bfin_twi_handle_interrupt(iface);
-	spin_unlock_irqrestore(&iface->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void bfin_twi_timeout(unsigned long data)
-{
-	struct bfin_twi_iface *iface = (struct bfin_twi_iface *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&iface->lock, flags);
-	bfin_twi_handle_interrupt(iface);
-	if (iface->result == 0) {
-		iface->timeout_count--;
-		if (iface->timeout_count > 0) {
-			iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-			add_timer(&iface->timeout_timer);
-		} else {
-			iface->result = -1;
-			complete(&iface->complete);
-		}
+	while (1) {
+		twi_int_status = read_INT_STAT(iface);
+		if (!twi_int_status)
+			break;
+		/* Clear interrupt status */
+		write_INT_STAT(iface, twi_int_status);
+		bfin_twi_handle_interrupt(iface, twi_int_status);
+		SSYNC();
 	}
 	spin_unlock_irqrestore(&iface->lock, flags);
+	return IRQ_HANDLED;
 }
 
 /*
- * Generic i2c master transfer entrypoint
+ * One i2c master transfer
  */
-static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 				struct i2c_msg *msgs, int num)
 {
 	struct bfin_twi_iface *iface = adap->algo_data;
@@ -319,7 +288,6 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
 	iface->transPtr = pmsg->buf;
 	iface->writeNum = iface->readNum = pmsg->len;
 	iface->result = 0;
-	iface->timeout_count = 10;
 	init_completion(&(iface->complete));
 	/* Set Transmit device address */
 	write_MASTER_ADDR(iface, pmsg->addr);
@@ -358,30 +326,41 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
 		iface->manual_stop = 1;
 	}
 
-	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-	add_timer(&iface->timeout_timer);
-
 	/* Master enable */
 	write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
 		((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
 		((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
 	SSYNC();
 
-	wait_for_completion(&iface->complete);
-
-	rc = iface->result;
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "master transfer timeout\n");
+		}
+	}
 
-	if (rc == 1)
-		return num;
+	if (iface->result == 1)
+		rc = iface->cur_msg + 1;
 	else
-		return rc;
+		rc = iface->result;
+
+	return rc;
 }
 
 /*
- * SMBus type transfer entrypoint
+ * Generic i2c master transfer entrypoint
  */
+static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num)
+{
+	return bfin_twi_do_master_xfer(adap, msgs, num);
+}
 
-int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+/*
+ * One I2C SMBus transfer
+ */
+int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 			unsigned short flags, char read_write,
 			u8 command, int size, union i2c_smbus_data *data)
 {
@@ -469,7 +448,6 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	iface->manual_stop = 0;
 	iface->read_write = read_write;
 	iface->command = command;
-	iface->timeout_count = 10;
 	init_completion(&(iface->complete));
 
 	/* FIFO Initiation. Data in FIFO should be discarded before
@@ -486,9 +464,6 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	write_MASTER_ADDR(iface, addr);
 	SSYNC();
 
-	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-	add_timer(&iface->timeout_timer);
-
 	switch (iface->cur_mode) {
 	case TWI_I2C_MODE_STANDARDSUB:
 		write_XMT_DATA8(iface, iface->command);
@@ -550,10 +525,8 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 				else if (iface->readNum > 255) {
 					write_MASTER_CTL(iface, 0xff << 6);
 					iface->manual_stop = 1;
-				} else {
-					del_timer(&iface->timeout_timer);
+				} else
 					break;
-				}
 			}
 		}
 		write_INT_MASK(iface, MCOMP | MERR |
@@ -569,7 +542,13 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	}
 	SSYNC();
 
-	wait_for_completion(&iface->complete);
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "smbus transfer timeout\n");
+		}
+	}
 
 	rc = (iface->result >= 0) ? 0 : -1;
 
@@ -577,6 +556,17 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 }
 
 /*
+ * Generic I2C SMBus transfer entrypoint
+ */
+int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			unsigned short flags, char read_write,
+			u8 command, int size, union i2c_smbus_data *data)
+{
+	return bfin_twi_do_smbus_xfer(adap, addr, flags,
+			read_write, command, size, data);
+}
+
+/*
  * Return what the adapter supports
  */
 static u32 bfin_twi_functionality(struct i2c_adapter *adap)
@@ -667,10 +657,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 		goto out_error_no_irq;
 	}
 
-	init_timer(&(iface->timeout_timer));
-	iface->timeout_timer.function = bfin_twi_timeout;
-	iface->timeout_timer.data = (unsigned long)iface;
-
 	p_adap = &iface->adap;
 	p_adap->nr = pdev->id;
 	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
@@ -678,6 +664,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	p_adap->algo_data = iface;
 	p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	p_adap->dev.parent = &pdev->dev;
+	p_adap->timeout = 5 * HZ;
+	p_adap->retries = 3;
 
 	rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
 	if (rc) {
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 7637e1234142..b02b4533651d 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -441,7 +441,7 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 	init_waitqueue_head(&cpm->i2c_wait);
 
 	cpm->irq = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
-	if (cpm->irq == NO_IRQ)
+	if (!cpm->irq)
 		return -EINVAL;
 
 	/* Install interrupt handler. */
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 612255614a66..e5b1a3bf5b80 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -37,8 +37,8 @@
 #include <linux/isa.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-pcf.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include "../algos/i2c-algo-pcf.h"
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index c21077d248af..d9aa9a649e35 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -211,7 +211,7 @@ static int __init i2c_gpio_init(void)
 
 	return ret;
 }
-module_init(i2c_gpio_init);
+subsys_initcall(i2c_gpio_init);
 
 static void __exit i2c_gpio_exit(void)
 {
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index ce87a902c94d..3df1bc80f37a 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -282,7 +282,6 @@ static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 				  union i2c_smbus_data *data)
 {
 	struct highlander_i2c_dev *dev = i2c_get_adapdata(adap);
-	int read = read_write & I2C_SMBUS_READ;
 	u16 tmp;
 
 	init_completion(&dev->cmd_complete);
@@ -337,11 +336,11 @@ static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	highlander_i2c_done(dev);
 
 	/* Set slave address */
-	iowrite16((addr << 1) | read, dev->base + SMSMADR);
+	iowrite16((addr << 1) | read_write, dev->base + SMSMADR);
 
 	highlander_i2c_command(dev, command, dev->buf_len);
 
-	if (read)
+	if (read_write == I2C_SMBUS_READ)
 		return highlander_i2c_read(dev);
 	else
 		return highlander_i2c_write(dev);
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index c767295ad1fb..9ff1695d8458 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -28,7 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/hydra.h>
 
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 299b918455a3..f4b21f2bb8ed 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -138,6 +138,17 @@ static struct pci_dev *I801_dev;
 #define FEATURE_I2C_BLOCK_READ	(1 << 3)
 static unsigned int i801_features;
 
+static const char *i801_feature_names[] = {
+	"SMBus PEC",
+	"Block buffer",
+	"Block process call",
+	"I2C block read",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
 static int i801_check_pre(void)
@@ -341,9 +352,8 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
 		do {
 			msleep(1);
 			status = inb_p(SMBHSTSTS);
-		}
-		while ((!(status & SMBHSTSTS_BYTE_DONE))
-		       && (timeout++ < MAX_TIMEOUT));
+		} while ((!(status & SMBHSTSTS_BYTE_DONE))
+			 && (timeout++ < MAX_TIMEOUT));
 
 		result = i801_check_post(status, timeout > MAX_TIMEOUT);
 		if (result < 0)
@@ -440,9 +450,9 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 }
 
 /* Return negative errno on error. */
-static s32 i801_access(struct i2c_adapter * adap, u16 addr,
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 		       unsigned short flags, char read_write, u8 command,
-		       int size, union i2c_smbus_data * data)
+		       int size, union i2c_smbus_data *data)
 {
 	int hwpec;
 	int block = 0;
@@ -511,7 +521,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 	else
 		outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
 
-	if(block)
+	if (block)
 		ret = i801_block_transaction(data, read_write, size, hwpec);
 	else
 		ret = i801_transaction(xact | ENABLE_INT9);
@@ -523,9 +533,9 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
 		       SMBAUXCTL);
 
-	if(block)
+	if (block)
 		return ret;
-	if(ret)
+	if (ret)
 		return ret;
 	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
 		return 0;
@@ -585,7 +595,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ 0, }
 };
 
-MODULE_DEVICE_TABLE (pci, i801_ids);
+MODULE_DEVICE_TABLE(pci, i801_ids);
 
 #if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
 static unsigned char apanel_addr;
@@ -689,10 +699,11 @@ static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
 }
 #endif
 
-static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit i801_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
 {
 	unsigned char temp;
-	int err;
+	int err, i;
 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
 	const char *vendor;
 #endif
@@ -700,26 +711,28 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
 	I801_dev = dev;
 	i801_features = 0;
 	switch (dev->device) {
-	case PCI_DEVICE_ID_INTEL_82801EB_3:
-	case PCI_DEVICE_ID_INTEL_ESB_4:
-	case PCI_DEVICE_ID_INTEL_ICH6_16:
-	case PCI_DEVICE_ID_INTEL_ICH7_17:
-	case PCI_DEVICE_ID_INTEL_ESB2_17:
-	case PCI_DEVICE_ID_INTEL_ICH8_5:
-	case PCI_DEVICE_ID_INTEL_ICH9_6:
-	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
-	case PCI_DEVICE_ID_INTEL_ICH10_4:
-	case PCI_DEVICE_ID_INTEL_ICH10_5:
-	case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CPT_SMBUS:
+	default:
 		i801_features |= FEATURE_I2C_BLOCK_READ;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801DB_3:
 		i801_features |= FEATURE_SMBUS_PEC;
 		i801_features |= FEATURE_BLOCK_BUFFER;
+		/* fall through */
+	case PCI_DEVICE_ID_INTEL_82801CA_3:
+	case PCI_DEVICE_ID_INTEL_82801BA_2:
+	case PCI_DEVICE_ID_INTEL_82801AB_3:
+	case PCI_DEVICE_ID_INTEL_82801AA_3:
 		break;
 	}
 
+	/* Disable features on user request */
+	for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+		if (i801_features & disable_features & (1 << i))
+			dev_notice(&dev->dev, "%s disabled by user\n",
+				   i801_feature_names[i]);
+	}
+	i801_features &= ~disable_features;
+
 	err = pci_enable_device(dev);
 	if (err) {
 		dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 3876f993fe76..bf344135647a 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -39,7 +39,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
 #include <linux/of_platform.h>
@@ -668,12 +668,12 @@ static int __devinit iic_request_irq(struct of_device *ofdev,
 	int irq;
 
 	if (iic_force_poll)
-		return NO_IRQ;
+		return 0;
 
 	irq = irq_of_parse_and_map(np, 0);
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
-		return NO_IRQ;
+		return 0;
 	}
 
 	/* Disable interrupts until we finish initialization, assumes
@@ -683,7 +683,7 @@ static int __devinit iic_request_irq(struct of_device *ofdev,
 	if (request_irq(irq, iic_handler, 0, "IBM IIC", dev)) {
 		dev_err(&ofdev->dev, "request_irq %d failed\n", irq);
 		/* Fallback to the polling mode */
-		return NO_IRQ;
+		return 0;
 	}
 
 	return irq;
@@ -719,7 +719,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	init_waitqueue_head(&dev->wq);
 
 	dev->irq = iic_request_irq(ofdev, dev);
-	if (dev->irq == NO_IRQ)
+	if (!dev->irq)
 		dev_warn(&ofdev->dev, "using polling mode\n");
 
 	/* Board specific settings */
@@ -766,7 +766,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	return 0;
 
 error_cleanup:
-	if (dev->irq != NO_IRQ) {
+	if (dev->irq) {
 		iic_interrupt_mode(dev, 0);
 		free_irq(dev->irq, dev);
 	}
@@ -790,7 +790,7 @@ static int __devexit iic_remove(struct of_device *ofdev)
 
 	i2c_del_adapter(&dev->adap);
 
-	if (dev->irq != NO_IRQ) {
+	if (dev->irq) {
 		iic_interrupt_mode(dev, 0);
 		free_irq(dev->irq, dev);
 	}
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index f7e27b702375..d1ff9408dc1f 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -146,10 +146,10 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 				"<%s> I2C Interrupted\n", __func__);
 			return -EINTR;
 		}
-		if (time_after(jiffies, orig_jiffies + HZ / 1000)) {
+		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> I2C bus is busy\n", __func__);
-			return -EIO;
+			return -ETIMEDOUT;
 		}
 		schedule();
 	}
@@ -444,6 +444,8 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 			result = i2c_imx_read(i2c_imx, &msgs[i]);
 		else
 			result = i2c_imx_write(i2c_imx, &msgs[i]);
+		if (result)
+			goto fail0;
 	}
 
 fail0:
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 5901707fc66a..112c61f7b8cd 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -38,8 +38,7 @@
 #include <linux/errno.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include "i2c-iop3xx.h"
 
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 791b71f46f7b..df00eb1f11f9 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -118,7 +118,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	u32 x;
 	int result = 0;
 
-	if (i2c->irq == NO_IRQ) {
+	if (!i2c->irq) {
 		while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
 			schedule();
 			if (time_after(jiffies, orig_jiffies + timeout)) {
@@ -568,7 +568,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 	}
 
 	i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0);
-	if (i2c->irq != NO_IRQ) { /* i2c->irq = NO_IRQ implies polling */
+	if (i2c->irq) { /* no i2c->irq implies polling */
 		result = request_irq(i2c->irq, mpc_i2c_isr,
 				     IRQF_SHARED, "i2c-mpc", i2c);
 		if (result < 0) {
@@ -628,7 +628,7 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
 	i2c_del_adapter(&i2c->adap);
 	dev_set_drvdata(&op->dev, NULL);
 
-	if (i2c->irq != NO_IRQ)
+	if (i2c->irq)
 		free_irq(i2c->irq, i2c);
 
 	irq_dispose_mapping(i2c->irq);
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 3623a4499084..16242063144f 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -17,8 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/platform_device.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* Register defines */
 #define	MV64XXX_I2C_REG_SLAVE_ADDR			0x00
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 4a48dd4ef787..a605a5029cfe 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -57,7 +57,7 @@
 #include <linux/dmi.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@gmx.net>");
@@ -404,10 +404,9 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
 
 	/* SMBus adapter 1 */
 	res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
-	if (res1 < 0) {
-		dev_err(&dev->dev, "Error probing SMB1.\n");
+	if (res1 < 0)
 		smbuses[0].base = 0;	/* to have a check value */
-	}
+
 	/* SMBus adapter 2 */
 	if (dmi_check_system(nforce2_dmi_blacklist2)) {
 		dev_err(&dev->dev, "Disabling SMB2 for safety reasons.\n");
@@ -416,11 +415,10 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
 	} else {
 		res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1],
 					 "SMB2");
-		if (res2 < 0) {
-			dev_err(&dev->dev, "Error probing SMB2.\n");
+		if (res2 < 0)
 			smbuses[1].base = 0;	/* to have a check value */
-		}
 	}
+
 	if ((res1 < 0) && (res2 < 0)) {
 		/* we did not find even one of the SMBuses, so we give up */
 		kfree(smbuses);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index a4f8d33fa389..73de8ade10b1 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -704,7 +704,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 	case I2C_IT_MTD:
 	case I2C_IT_MTDWS:
 		if (dev->cli.operation == I2C_READ) {
-			while (!readl(dev->virtbase + I2C_RISR) & I2C_IT_RXFE) {
+			while (!(readl(dev->virtbase + I2C_RISR)
+				 & I2C_IT_RXFE)) {
 				if (dev->cli.count == 0)
 					break;
 				*dev->cli.buffer =
@@ -914,6 +915,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 
 static int __devexit nmk_i2c_remove(struct platform_device *pdev)
 {
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&dev->adap);
@@ -924,6 +926,8 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
 	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
 	free_irq(dev->irq, dev);
 	iounmap(dev->virtbase);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
 	clk_disable(dev->clk);
 	clk_put(dev->clk);
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index b4ed4ca802ed..0070371b29f3 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -19,7 +19,7 @@
 #include <linux/wait.h>
 #include <linux/i2c-ocores.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 struct ocores_i2c {
 	void __iomem *base;
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index a2481f40ea1c..0e9f85d0a835 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -447,7 +447,7 @@ static struct i2c_adapter octeon_i2c_ops = {
 /**
  * octeon_i2c_setclock - Calculate and set clock divisors.
  */
-static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_setclock(struct octeon_i2c *i2c)
 {
 	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
 	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
@@ -490,7 +490,7 @@ static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
 	return 0;
 }
 
-static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
 {
 	u8 status;
 	int tries;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 6bd0f19cd451..7674efb55378 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -38,6 +38,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/i2c-omap.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_REV_2			0x20
@@ -45,29 +46,37 @@
 /* I2C controller revisions present on specific hardware */
 #define OMAP_I2C_REV_ON_2430		0x36
 #define OMAP_I2C_REV_ON_3430		0x3C
+#define OMAP_I2C_REV_ON_4430		0x40
 
 /* timeout waiting for the controller to respond */
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
 
-#define OMAP_I2C_REV_REG		0x00
-#define OMAP_I2C_IE_REG			0x01
-#define OMAP_I2C_STAT_REG		0x02
-#define OMAP_I2C_IV_REG			0x03
 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
-#define OMAP_I2C_WE_REG			0x03
-#define OMAP_I2C_SYSS_REG		0x04
-#define OMAP_I2C_BUF_REG		0x05
-#define OMAP_I2C_CNT_REG		0x06
-#define OMAP_I2C_DATA_REG		0x07
-#define OMAP_I2C_SYSC_REG		0x08
-#define OMAP_I2C_CON_REG		0x09
-#define OMAP_I2C_OA_REG			0x0a
-#define OMAP_I2C_SA_REG			0x0b
-#define OMAP_I2C_PSC_REG		0x0c
-#define OMAP_I2C_SCLL_REG		0x0d
-#define OMAP_I2C_SCLH_REG		0x0e
-#define OMAP_I2C_SYSTEST_REG		0x0f
-#define OMAP_I2C_BUFSTAT_REG		0x10
+enum {
+	OMAP_I2C_REV_REG = 0,
+	OMAP_I2C_IE_REG,
+	OMAP_I2C_STAT_REG,
+	OMAP_I2C_IV_REG,
+	OMAP_I2C_WE_REG,
+	OMAP_I2C_SYSS_REG,
+	OMAP_I2C_BUF_REG,
+	OMAP_I2C_CNT_REG,
+	OMAP_I2C_DATA_REG,
+	OMAP_I2C_SYSC_REG,
+	OMAP_I2C_CON_REG,
+	OMAP_I2C_OA_REG,
+	OMAP_I2C_SA_REG,
+	OMAP_I2C_PSC_REG,
+	OMAP_I2C_SCLL_REG,
+	OMAP_I2C_SCLH_REG,
+	OMAP_I2C_SYSTEST_REG,
+	OMAP_I2C_BUFSTAT_REG,
+	OMAP_I2C_REVNB_LO,
+	OMAP_I2C_REVNB_HI,
+	OMAP_I2C_IRQSTATUS_RAW,
+	OMAP_I2C_IRQENABLE_SET,
+	OMAP_I2C_IRQENABLE_CLR,
+};
 
 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
 #define OMAP_I2C_IE_XDR		(1 << 14)	/* TX Buffer drain int enable */
@@ -157,6 +166,9 @@
 #define SYSC_IDLEMODE_SMART		0x2
 #define SYSC_CLOCKACTIVITY_FCLK		0x2
 
+/* Errata definitions */
+#define I2C_OMAP_ERRATA_I207		(1 << 0)
+#define I2C_OMAP3_1P153			(1 << 1)
 
 struct omap_i2c_dev {
 	struct device		*dev;
@@ -167,9 +179,13 @@ struct omap_i2c_dev {
 	struct clk		*fclk;		/* Functional clock */
 	struct completion	cmd_complete;
 	struct resource		*ioarea;
+	u32			latency;	/* maximum mpu wkup latency */
+	void			(*set_mpu_wkup_lat)(struct device *dev,
+						    long latency);
 	u32			speed;		/* Speed of bus in Khz */
 	u16			cmd_err;
 	u8			*buf;
+	u8			*regs;
 	size_t			buf_len;
 	struct i2c_adapter	adapter;
 	u8			fifo_size;	/* use as flag and value
@@ -186,17 +202,67 @@ struct omap_i2c_dev {
 	u16			bufstate;
 	u16			syscstate;
 	u16			westate;
+	u16			errata;
+};
+
+const static u8 reg_map[] = {
+	[OMAP_I2C_REV_REG] = 0x00,
+	[OMAP_I2C_IE_REG] = 0x01,
+	[OMAP_I2C_STAT_REG] = 0x02,
+	[OMAP_I2C_IV_REG] = 0x03,
+	[OMAP_I2C_WE_REG] = 0x03,
+	[OMAP_I2C_SYSS_REG] = 0x04,
+	[OMAP_I2C_BUF_REG] = 0x05,
+	[OMAP_I2C_CNT_REG] = 0x06,
+	[OMAP_I2C_DATA_REG] = 0x07,
+	[OMAP_I2C_SYSC_REG] = 0x08,
+	[OMAP_I2C_CON_REG] = 0x09,
+	[OMAP_I2C_OA_REG] = 0x0a,
+	[OMAP_I2C_SA_REG] = 0x0b,
+	[OMAP_I2C_PSC_REG] = 0x0c,
+	[OMAP_I2C_SCLL_REG] = 0x0d,
+	[OMAP_I2C_SCLH_REG] = 0x0e,
+	[OMAP_I2C_SYSTEST_REG] = 0x0f,
+	[OMAP_I2C_BUFSTAT_REG] = 0x10,
+};
+
+const static u8 omap4_reg_map[] = {
+	[OMAP_I2C_REV_REG] = 0x04,
+	[OMAP_I2C_IE_REG] = 0x2c,
+	[OMAP_I2C_STAT_REG] = 0x28,
+	[OMAP_I2C_IV_REG] = 0x34,
+	[OMAP_I2C_WE_REG] = 0x34,
+	[OMAP_I2C_SYSS_REG] = 0x90,
+	[OMAP_I2C_BUF_REG] = 0x94,
+	[OMAP_I2C_CNT_REG] = 0x98,
+	[OMAP_I2C_DATA_REG] = 0x9c,
+	[OMAP_I2C_SYSC_REG] = 0x20,
+	[OMAP_I2C_CON_REG] = 0xa4,
+	[OMAP_I2C_OA_REG] = 0xa8,
+	[OMAP_I2C_SA_REG] = 0xac,
+	[OMAP_I2C_PSC_REG] = 0xb0,
+	[OMAP_I2C_SCLL_REG] = 0xb4,
+	[OMAP_I2C_SCLH_REG] = 0xb8,
+	[OMAP_I2C_SYSTEST_REG] = 0xbC,
+	[OMAP_I2C_BUFSTAT_REG] = 0xc0,
+	[OMAP_I2C_REVNB_LO] = 0x00,
+	[OMAP_I2C_REVNB_HI] = 0x04,
+	[OMAP_I2C_IRQSTATUS_RAW] = 0x24,
+	[OMAP_I2C_IRQENABLE_SET] = 0x2c,
+	[OMAP_I2C_IRQENABLE_CLR] = 0x30,
 };
 
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift));
+	__raw_writew(val, i2c_dev->base +
+			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift));
+	return __raw_readw(i2c_dev->base +
+				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
@@ -265,7 +331,11 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 	WARN_ON(dev->idle);
 
 	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
-	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+	if (dev->rev >= OMAP_I2C_REV_ON_4430)
+		omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1);
+	else
+		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+
 	if (dev->rev < OMAP_I2C_REV_2) {
 		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
 	} else {
@@ -330,7 +400,9 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			 * REVISIT: Some wkup sources might not be needed.
 			 */
 			dev->westate = OMAP_I2C_WE_ALL;
-			omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+			if (dev->rev < OMAP_I2C_REV_ON_4430)
+				omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+								dev->westate);
 		}
 	}
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
@@ -357,7 +429,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			psc = fclk_rate / 12000000;
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
 
 		/*
 		 * HSI2C controller internal clk rate should be 19.2 Mhz for
@@ -430,6 +502,11 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	/* Take the I2C module out of reset: */
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 
+	dev->errata = 0;
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
+		dev->errata |= I2C_OMAP_ERRATA_I207;
+
 	/* Enable interrupts */
 	dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
@@ -539,8 +616,12 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	 * REVISIT: We should abort the transfer on signals, but the bus goes
 	 * into arbitration and we're currently unable to recover from it.
 	 */
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, dev->latency);
 	r = wait_for_completion_timeout(&dev->cmd_complete,
 					OMAP_I2C_TIMEOUT);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, -1);
 	dev->buf_len = 0;
 	if (r < 0)
 		return r;
@@ -623,6 +704,34 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 	omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 }
 
+static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat)
+{
+	/*
+	 * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
+	 * Not applicable for OMAP4.
+	 * Under certain rare conditions, RDR could be set again
+	 * when the bus is busy, then ignore the interrupt and
+	 * clear the interrupt.
+	 */
+	if (stat & OMAP_I2C_STAT_RDR) {
+		/* Step 1: If RDR is set, clear it */
+		omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
+
+		/* Step 2: */
+		if (!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
+						& OMAP_I2C_STAT_BB)) {
+
+			/* Step 3: */
+			if (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
+						& OMAP_I2C_STAT_RDR) {
+				omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
+				dev_dbg(dev->dev, "RDR when bus is busy.\n");
+			}
+
+		}
+	}
+}
+
 /* rev1 devices are apparently only on some 15xx */
 #ifdef CONFIG_ARCH_OMAP15XX
 
@@ -684,6 +793,35 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
 #define omap_i2c_rev1_isr		NULL
 #endif
 
+/*
+ * OMAP3430 Errata 1.153: When an XRDY/XDR is hit, wait for XUDF before writing
+ * data to DATA_REG. Otherwise some data bytes can be lost while transferring
+ * them from the memory to the I2C interface.
+ */
+static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
+{
+	unsigned long timeout = 10000;
+
+	while (--timeout && !(*stat & OMAP_I2C_STAT_XUDF)) {
+		if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+			omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
+							OMAP_I2C_STAT_XDR));
+			*err |= OMAP_I2C_STAT_XUDF;
+			return -ETIMEDOUT;
+		}
+
+		cpu_relax();
+		*stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+	}
+
+	if (!timeout) {
+		dev_err(dev->dev, "timeout waiting on XUDF bit\n");
+		return 0;
+	}
+
+	return 0;
+}
+
 static irqreturn_t
 omap_i2c_isr(int this_irq, void *dev_id)
 {
@@ -733,6 +871,10 @@ complete:
 		}
 		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 			u8 num_bytes = 1;
+
+			if (dev->errata & I2C_OMAP_ERRATA_I207)
+				i2c_omap_errata_i207(dev, stat);
+
 			if (dev->fifo_size) {
 				if (stat & OMAP_I2C_STAT_RRDY)
 					num_bytes = dev->fifo_size;
@@ -747,9 +889,12 @@ complete:
 				if (dev->buf_len) {
 					*dev->buf++ = w;
 					dev->buf_len--;
-					/* Data reg from 2430 is 8 bit wide */
-					if (!cpu_is_omap2430() &&
-							!cpu_is_omap34xx()) {
+					/*
+					 * Data reg in 2430, omap3 and
+					 * omap4 is 8 bit wide
+					 */
+					if (cpu_class_is_omap1() ||
+							cpu_is_omap2420()) {
 						if (dev->buf_len) {
 							*dev->buf++ = w >> 8;
 							dev->buf_len--;
@@ -787,9 +932,12 @@ complete:
 				if (dev->buf_len) {
 					w = *dev->buf++;
 					dev->buf_len--;
-					/* Data reg from  2430 is 8 bit wide */
-					if (!cpu_is_omap2430() &&
-							!cpu_is_omap34xx()) {
+					/*
+					 * Data reg in 2430, omap3 and
+					 * omap4 is 8 bit wide
+					 */
+					if (cpu_class_is_omap1() ||
+							cpu_is_omap2420()) {
 						if (dev->buf_len) {
 							w |= *dev->buf++ << 8;
 							dev->buf_len--;
@@ -807,25 +955,9 @@ complete:
 					break;
 				}
 
-				/*
-				 * OMAP3430 Errata 1.153: When an XRDY/XDR
-				 * is hit, wait for XUDF before writing data
-				 * to DATA_REG. Otherwise some data bytes can
-				 * be lost while transferring them from the
-				 * memory to the I2C interface.
-				 */
-
-				if (dev->rev <= OMAP_I2C_REV_ON_3430) {
-						while (!(stat & OMAP_I2C_STAT_XUDF)) {
-							if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
-								omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
-								err |= OMAP_I2C_STAT_XUDF;
-								goto complete;
-							}
-							cpu_relax();
-							stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
-						}
-				}
+				if ((dev->errata & I2C_OMAP3_1P153) &&
+				    errata_omap3_1p153(dev, &stat, &err))
+					goto complete;
 
 				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 			}
@@ -857,6 +989,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	struct omap_i2c_dev	*dev;
 	struct i2c_adapter	*adap;
 	struct resource		*mem, *irq, *ioarea;
+	struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
 	irq_handler_t isr;
 	int r;
 	u32 speed = 0;
@@ -886,10 +1019,13 @@ omap_i2c_probe(struct platform_device *pdev)
 		goto err_release_region;
 	}
 
-	if (pdev->dev.platform_data != NULL)
-		speed = *(u32 *)pdev->dev.platform_data;
-	else
-		speed = 100;	/* Defualt speed */
+	if (pdata != NULL) {
+		speed = pdata->clkrate;
+		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
+	} else {
+		speed = 100;	/* Default speed */
+		dev->set_mpu_wkup_lat = NULL;
+	}
 
 	dev->speed = speed;
 	dev->idle = 1;
@@ -903,14 +1039,29 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
+	if (cpu_is_omap7xx())
+		dev->reg_shift = 1;
+	else if (cpu_is_omap44xx())
+		dev->reg_shift = 0;
+	else
+		dev->reg_shift = 2;
+
 	if ((r = omap_i2c_get_clocks(dev)) != 0)
 		goto err_iounmap;
 
+	if (cpu_is_omap44xx())
+		dev->regs = (u8 *) omap4_reg_map;
+	else
+		dev->regs = (u8 *) reg_map;
+
 	omap_i2c_unidle(dev);
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (dev->rev <= OMAP_I2C_REV_ON_3430)
+		dev->errata |= I2C_OMAP3_1P153;
+
+	if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
 		u16 s;
 
 		/* Set up the fifo size - Get total size */
@@ -922,15 +1073,19 @@ omap_i2c_probe(struct platform_device *pdev)
 		 * size. This is to ensure that we can handle the status on int
 		 * call back latencies.
 		 */
-		dev->fifo_size = (dev->fifo_size / 2);
-		dev->b_hw = 1; /* Enable hardware fixes */
+		if (dev->rev >= OMAP_I2C_REV_ON_4430) {
+			dev->fifo_size = 0;
+			dev->b_hw = 0; /* Disable hardware fixes */
+		} else {
+			dev->fifo_size = (dev->fifo_size / 2);
+			dev->b_hw = 1; /* Enable hardware fixes */
+		}
+		/* calculate wakeup latency constraint for MPU */
+		if (dev->set_mpu_wkup_lat != NULL)
+			dev->latency = (1000000 * dev->fifo_size) /
+				       (1000 * speed / 8);
 	}
 
-	if (cpu_is_omap7xx())
-		dev->reg_shift = 1;
-	else
-		dev->reg_shift = 2;
-
 	/* reset ASAP, clearing any IRQs */
 	omap_i2c_init(dev);
 
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 5f41ec0f72d2..fc5fbd1012c9 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -33,7 +33,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-smbus.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include "i2c-parport.h"
 
 #define DEFAULT_BASE 0x378
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 846583ed4763..0eb1515541e7 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -137,7 +137,7 @@ static int parport_getsda(void *data)
    copied. The attaching code will set getscl to NULL for adapters that
    cannot read SCL back, and will also make the data field point to
    the parallel port structure. */
-static struct i2c_algo_bit_data parport_algo_data = {
+static const struct i2c_algo_bit_data parport_algo_data = {
 	.setsda		= parport_setsda,
 	.setscl		= parport_setscl,
 	.getsda		= parport_getsda,
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index d3d4a4b43a1d..4174101660c9 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -25,7 +25,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static struct pci_driver pasemi_smb_driver;
 
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index f7346a9bd95f..bbd77603a417 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -30,8 +30,8 @@
 #include <linux/isa.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-pca.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #define DRIVER "i2c-pca-isa"
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 5b2213df5ed0..ef5c78487eb7 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -23,9 +23,9 @@
 #include <linux/i2c-algo-pca.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/gpio.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 
 struct i2c_pca_pf_data {
 	void __iomem			*reg_base;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index ee9da6fcf69a..6d14ac2e3c41 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -39,7 +39,7 @@
 #include <linux/init.h>
 #include <linux/dmi.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 
 /* PIIX4 SMBus address offsets */
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 7b57d5f267e1..dfa7ae9c1b8e 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -33,7 +33,7 @@
 #include <linux/completion.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define DRV_NAME	"pmcmsptwi"
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 247103372a06..a97e3fec8148 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -173,6 +173,9 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 		/* We still have something to talk about... */
 		val = *alg_data->mif.buf++;
 
+		if (alg_data->mif.len == 1)
+			val |= stop_bit;
+
 		alg_data->mif.len--;
 		iowrite32(val, I2C_REG_TX(alg_data));
 
@@ -246,6 +249,9 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 			__func__);
 
 		if (alg_data->mif.len == 1) {
+			/* Last byte, do not acknowledge next rcv. */
+			val |= stop_bit;
+
 			/*
 			 * Enable interrupt RFDAIE (data in Rx fifo),
 			 * and disable DRMIE (need data for Tx)
@@ -633,6 +639,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	 */
 
 	tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+	if (tmp > 0x3FF)
+		tmp = 0x3FF;
 	iowrite32(tmp, I2C_REG_CKH(alg_data));
 	iowrite32(tmp, I2C_REG_CKL(alg_data));
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 14d249f5ed3f..020ff23d762f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,9 +34,9 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <plat/i2c.h>
 
 /*
@@ -209,18 +209,6 @@ static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
 }
 
 #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__)
-#else
-#define i2c_debug	0
-
-#define show_state(i2c) do { } while (0)
-#define decode_ISR(val) do { } while (0)
-#define decode_ICR(val) do { } while (0)
-#endif
-
-#define eedbg(lvl, x...) do { if ((lvl) < 1) { printk(KERN_DEBUG "" x); } } while(0)
-
-static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
-static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
 
 static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 {
@@ -236,6 +224,20 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 	printk("\n");
 }
 
+#else /* ifdef DEBUG */
+
+#define i2c_debug	0
+
+#define show_state(i2c) do { } while (0)
+#define decode_ISR(val) do { } while (0)
+#define decode_ICR(val) do { } while (0)
+#define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0)
+
+#endif /* ifdef DEBUG / else */
+
+static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
+static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
+
 static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
 {
 	return !(readl(_ICR(i2c)) & ICR_SCLE);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index d27072b2249f..72902e0bbfa7 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,9 +35,9 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <plat/regs-iic.h>
 #include <plat/iic.h>
@@ -482,7 +482,8 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 			      struct i2c_msg *msgs, int num)
 {
-	unsigned long timeout;
+	unsigned long iicstat, timeout;
+	int spins = 20;
 	int ret;
 
 	if (i2c->suspended)
@@ -521,7 +522,21 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 
 	/* ensure the stop has been through the bus */
 
-	msleep(1);
+	dev_dbg(i2c->dev, "waiting for bus idle\n");
+
+	/* first, try busy waiting briefly */
+	do {
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+	} while ((iicstat & S3C2410_IICSTAT_START) && --spins);
+
+	/* if that timed out sleep */
+	if (!spins) {
+		msleep(1);
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+	}
+
+	if (iicstat & S3C2410_IICSTAT_START)
+		dev_warn(i2c->dev, "timeout waiting for bus idle\n");
 
  out:
 	return ret;
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index c91359f4965c..cadc0216e02f 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -36,8 +36,8 @@
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include "i2c-s6000.h"
 
 #define DRV_NAME "i2c-s6000"
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index b9680f50f541..4f93da31d3ad 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -16,10 +16,10 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <asm/clock.h>
 #include <asm/i2c-sh7760.h>
-#include <asm/io.h>
 
 /* register offsets */
 #define I2CSCR		0x0		/* slave ctrl		*/
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 98b1ec489159..3d76a188e42f 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_smbus.h>
 
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
index 78b06107342c..2fc08fbf67a2 100644
--- a/drivers/i2c/busses/i2c-simtec.c
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -24,12 +24,11 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/io.h>
-
 struct simtec_i2c_data {
 	struct resource		*ioarea;
 	void __iomem		*reg;
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 55a71370c79b..437586611d4a 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -61,7 +61,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int blacklist[] = {
 	PCI_DEVICE_ID_SI_540,
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 2309c7f1bde2..e6f539e26f65 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -53,7 +53,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* SIS630 SMBus registers */
 #define SMB_STS			0x80	/* status */
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index d43d8f8943dd..86837f0c4cb9 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -38,7 +38,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* base address register in PCI config space */
 #define SIS96x_BAR 0x04
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 1f5b38be73bc..495be451d326 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -498,7 +498,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 	int i = 0;
 
 	/* Locate the apropriate clock setting */
-	while (i < ARRAY_SIZE(stu300_clktable) &&
+	while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
 	       stu300_clktable[i].rate < clkrate)
 		i++;
 
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index 0c770eabe85e..b1b3447942c9 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -29,13 +29,16 @@
 #include <linux/i2c.h>
 
 #define MAX_CHIPS 10
+#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
+		   I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
+		   I2C_FUNC_SMBUS_I2C_BLOCK)
 
 static unsigned short chip_addr[MAX_CHIPS];
 module_param_array(chip_addr, ushort, NULL, S_IRUGO);
 MODULE_PARM_DESC(chip_addr,
 		 "Chip addresses (up to 10, between 0x03 and 0x77)");
 
-static unsigned long functionality = ~0UL;
+static unsigned long functionality = STUB_FUNC;
 module_param(functionality, ulong, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(functionality, "Override functionality bitfield");
 
@@ -156,9 +159,7 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
 
 static u32 stub_func(struct i2c_adapter *adapter)
 {
-	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-		I2C_FUNC_SMBUS_I2C_BLOCK) & functionality;
+	return STUB_FUNC & functionality;
 }
 
 static const struct i2c_algorithm smbus_algorithm = {
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 5c473833d948..60556012312f 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -15,8 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define I2C_CONTROL	0x00
 #define I2C_CONTROLS	0x00
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index de78283bddbe..7799fe5bda88 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -25,7 +25,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* Power management registers */
 #define PM_CFG_REVID	0x08	/* silicon revision code */
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index d57292e5dae0..4c6fff5f330d 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -51,7 +51,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static struct pci_dev *vt596_pdev;
 
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 684395b6f3e2..4cb4bb009950 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -32,7 +32,7 @@
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <linux/scx200.h>
 
@@ -552,7 +552,7 @@ static int __init scx200_create_isa(const char *text, unsigned long base,
  * the name and the BAR where the I/O address resource is located.  ISA
  * devices are flagged with a bar value of -1 */
 
-static struct pci_device_id scx200_pci[] = {
+static const struct pci_device_id scx200_pci[] __initconst = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE),
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE),
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index 42df0eca43d5..7ee0d502ceab 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -27,7 +27,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <linux/scx200_gpio.h>
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 4099b2b8c392..e0f833cca3f1 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -40,12 +40,11 @@
 #include "i2c-core.h"
 
 
-/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees
+/* core_lock protects i2c_adapter_idr, and guarantees
    that device detection, deletion of detected devices, and attach_adapter
    and detach_adapter calls are serialized */
 static DEFINE_MUTEX(core_lock);
 static DEFINE_IDR(i2c_adapter_idr);
-static LIST_HEAD(userspace_devices);
 
 static struct device_type i2c_client_type;
 static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
@@ -117,8 +116,10 @@ static int i2c_device_probe(struct device *dev)
 	dev_dbg(dev, "probe\n");
 
 	status = driver->probe(client, i2c_match_id(driver->id_table, client));
-	if (status)
+	if (status) {
 		client->driver = NULL;
+		i2c_set_clientdata(client, NULL);
+	}
 	return status;
 }
 
@@ -139,8 +140,10 @@ static int i2c_device_remove(struct device *dev)
 		dev->driver = NULL;
 		status = 0;
 	}
-	if (status == 0)
+	if (status == 0) {
 		client->driver = NULL;
+		i2c_set_clientdata(client, NULL);
+	}
 	return status;
 }
 
@@ -156,106 +159,130 @@ static void i2c_device_shutdown(struct device *dev)
 		driver->shutdown(client);
 }
 
-#ifdef CONFIG_SUSPEND
-static int i2c_device_pm_suspend(struct device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int i2c_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
-	const struct dev_pm_ops *pm;
+	struct i2c_client *client = i2c_verify_client(dev);
+	struct i2c_driver *driver;
 
-	if (!dev->driver)
+	if (!client || !dev->driver)
 		return 0;
-	pm = dev->driver->pm;
-	if (!pm || !pm->suspend)
+	driver = to_i2c_driver(dev->driver);
+	if (!driver->suspend)
 		return 0;
-	return pm->suspend(dev);
+	return driver->suspend(client, mesg);
 }
 
-static int i2c_device_pm_resume(struct device *dev)
+static int i2c_legacy_resume(struct device *dev)
 {
-	const struct dev_pm_ops *pm;
+	struct i2c_client *client = i2c_verify_client(dev);
+	struct i2c_driver *driver;
 
-	if (!dev->driver)
+	if (!client || !dev->driver)
 		return 0;
-	pm = dev->driver->pm;
-	if (!pm || !pm->resume)
+	driver = to_i2c_driver(dev->driver);
+	if (!driver->resume)
 		return 0;
-	return pm->resume(dev);
+	return driver->resume(client);
 }
-#else
-#define i2c_device_pm_suspend	NULL
-#define i2c_device_pm_resume	NULL
-#endif
 
-#ifdef CONFIG_PM_RUNTIME
-static int i2c_device_runtime_suspend(struct device *dev)
+static int i2c_device_pm_suspend(struct device *dev)
 {
-	const struct dev_pm_ops *pm;
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (!dev->driver)
-		return 0;
-	pm = dev->driver->pm;
-	if (!pm || !pm->runtime_suspend)
+	if (pm_runtime_suspended(dev))
 		return 0;
-	return pm->runtime_suspend(dev);
-}
 
-static int i2c_device_runtime_resume(struct device *dev)
-{
-	const struct dev_pm_ops *pm;
+	if (pm)
+		return pm->suspend ? pm->suspend(dev) : 0;
 
-	if (!dev->driver)
-		return 0;
-	pm = dev->driver->pm;
-	if (!pm || !pm->runtime_resume)
-		return 0;
-	return pm->runtime_resume(dev);
+	return i2c_legacy_suspend(dev, PMSG_SUSPEND);
 }
 
-static int i2c_device_runtime_idle(struct device *dev)
+static int i2c_device_pm_resume(struct device *dev)
 {
-	const struct dev_pm_ops *pm = NULL;
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 	int ret;
 
-	if (dev->driver)
-		pm = dev->driver->pm;
-	if (pm && pm->runtime_idle) {
-		ret = pm->runtime_idle(dev);
-		if (ret)
-			return ret;
+	if (pm)
+		ret = pm->resume ? pm->resume(dev) : 0;
+	else
+		ret = i2c_legacy_resume(dev);
+
+	if (!ret) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
 	}
 
-	return pm_runtime_suspend(dev);
+	return ret;
 }
-#else
-#define i2c_device_runtime_suspend	NULL
-#define i2c_device_runtime_resume	NULL
-#define i2c_device_runtime_idle		NULL
-#endif
 
-static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
+static int i2c_device_pm_freeze(struct device *dev)
 {
-	struct i2c_client *client = i2c_verify_client(dev);
-	struct i2c_driver *driver;
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (!client || !dev->driver)
+	if (pm_runtime_suspended(dev))
 		return 0;
-	driver = to_i2c_driver(dev->driver);
-	if (!driver->suspend)
-		return 0;
-	return driver->suspend(client, mesg);
+
+	if (pm)
+		return pm->freeze ? pm->freeze(dev) : 0;
+
+	return i2c_legacy_suspend(dev, PMSG_FREEZE);
 }
 
-static int i2c_device_resume(struct device *dev)
+static int i2c_device_pm_thaw(struct device *dev)
 {
-	struct i2c_client *client = i2c_verify_client(dev);
-	struct i2c_driver *driver;
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (!client || !dev->driver)
+	if (pm_runtime_suspended(dev))
 		return 0;
-	driver = to_i2c_driver(dev->driver);
-	if (!driver->resume)
+
+	if (pm)
+		return pm->thaw ? pm->thaw(dev) : 0;
+
+	return i2c_legacy_resume(dev);
+}
+
+static int i2c_device_pm_poweroff(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm_runtime_suspended(dev))
 		return 0;
-	return driver->resume(client);
+
+	if (pm)
+		return pm->poweroff ? pm->poweroff(dev) : 0;
+
+	return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int i2c_device_pm_restore(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	int ret;
+
+	if (pm)
+		ret = pm->restore ? pm->restore(dev) : 0;
+	else
+		ret = i2c_legacy_resume(dev);
+
+	if (!ret) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
 }
+#else /* !CONFIG_PM_SLEEP */
+#define i2c_device_pm_suspend	NULL
+#define i2c_device_pm_resume	NULL
+#define i2c_device_pm_freeze	NULL
+#define i2c_device_pm_thaw	NULL
+#define i2c_device_pm_poweroff	NULL
+#define i2c_device_pm_restore	NULL
+#endif /* !CONFIG_PM_SLEEP */
 
 static void i2c_client_dev_release(struct device *dev)
 {
@@ -298,9 +325,15 @@ static const struct attribute_group *i2c_dev_attr_groups[] = {
 static const struct dev_pm_ops i2c_device_pm_ops = {
 	.suspend = i2c_device_pm_suspend,
 	.resume = i2c_device_pm_resume,
-	.runtime_suspend = i2c_device_runtime_suspend,
-	.runtime_resume = i2c_device_runtime_resume,
-	.runtime_idle = i2c_device_runtime_idle,
+	.freeze = i2c_device_pm_freeze,
+	.thaw = i2c_device_pm_thaw,
+	.poweroff = i2c_device_pm_poweroff,
+	.restore = i2c_device_pm_restore,
+	SET_RUNTIME_PM_OPS(
+		pm_generic_runtime_suspend,
+		pm_generic_runtime_resume,
+		pm_generic_runtime_idle
+	)
 };
 
 struct bus_type i2c_bus_type = {
@@ -309,8 +342,6 @@ struct bus_type i2c_bus_type = {
 	.probe		= i2c_device_probe,
 	.remove		= i2c_device_remove,
 	.shutdown	= i2c_device_shutdown,
-	.suspend	= i2c_device_suspend,
-	.resume		= i2c_device_resume,
 	.pm		= &i2c_device_pm_ops,
 };
 EXPORT_SYMBOL_GPL(i2c_bus_type);
@@ -541,9 +572,9 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
 		return -EEXIST;
 
 	/* Keep track of the added device */
-	mutex_lock(&core_lock);
-	list_add_tail(&client->detected, &userspace_devices);
-	mutex_unlock(&core_lock);
+	i2c_lock_adapter(adap);
+	list_add_tail(&client->detected, &adap->userspace_clients);
+	i2c_unlock_adapter(adap);
 	dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
 		 info.type, info.addr);
 
@@ -582,9 +613,10 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
 
 	/* Make sure the device was added through sysfs */
 	res = -ENOENT;
-	mutex_lock(&core_lock);
-	list_for_each_entry_safe(client, next, &userspace_devices, detected) {
-		if (client->addr == addr && client->adapter == adap) {
+	i2c_lock_adapter(adap);
+	list_for_each_entry_safe(client, next, &adap->userspace_clients,
+				 detected) {
+		if (client->addr == addr) {
 			dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
 				 "delete_device", client->name, client->addr);
 
@@ -594,7 +626,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
 			break;
 		}
 	}
-	mutex_unlock(&core_lock);
+	i2c_unlock_adapter(adap);
 
 	if (res < 0)
 		dev_err(dev, "%s: Can't find device in list\n",
@@ -676,6 +708,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	}
 
 	rt_mutex_init(&adap->bus_lock);
+	INIT_LIST_HEAD(&adap->userspace_clients);
 
 	/* Set default timeout to 1 second if not already set */
 	if (adap->timeout == 0)
@@ -878,14 +911,15 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 		return res;
 
 	/* Remove devices instantiated from sysfs */
-	list_for_each_entry_safe(client, next, &userspace_devices, detected) {
-		if (client->adapter == adap) {
-			dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
-				client->name, client->addr);
-			list_del(&client->detected);
-			i2c_unregister_device(client);
-		}
+	i2c_lock_adapter(adap);
+	list_for_each_entry_safe(client, next, &adap->userspace_clients,
+				 detected) {
+		dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
+			client->addr);
+		list_del(&client->detected);
+		i2c_unregister_device(client);
 	}
+	i2c_unlock_adapter(adap);
 
 	/* Detach any active clients. This can't fail, thus we do not
 	   checking the returned value. */
@@ -1190,10 +1224,10 @@ EXPORT_SYMBOL(i2c_transfer);
  *
  * Returns negative errno, or else the number of bytes written.
  */
-int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
+int i2c_master_send(struct i2c_client *client, const char *buf, int count)
 {
 	int ret;
-	struct i2c_adapter *adap=client->adapter;
+	struct i2c_adapter *adap = client->adapter;
 	struct i2c_msg msg;
 
 	msg.addr = client->addr;
@@ -1217,9 +1251,9 @@ EXPORT_SYMBOL(i2c_master_send);
  *
  * Returns negative errno, or else the number of bytes read.
  */
-int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
+int i2c_master_recv(struct i2c_client *client, char *buf, int count)
 {
-	struct i2c_adapter *adap=client->adapter;
+	struct i2c_adapter *adap = client->adapter;
 	struct i2c_msg msg;
 	int ret;
 
@@ -1263,12 +1297,23 @@ static int i2c_detect_address(struct i2c_client *temp_client,
 		return 0;
 
 	/* Make sure there is something at this address */
-	if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
-		return 0;
+	if (addr == 0x73 && (adapter->class & I2C_CLASS_HWMON)) {
+		/* Special probe for FSC hwmon chips */
+		union i2c_smbus_data dummy;
 
-	/* Prevent 24RF08 corruption */
-	if ((addr & ~0x0f) == 0x50)
-		i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL);
+		if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0,
+				   I2C_SMBUS_BYTE_DATA, &dummy) < 0)
+			return 0;
+	} else {
+		if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
+				   I2C_SMBUS_QUICK, NULL) < 0)
+			return 0;
+
+		/* Prevent 24RF08 corruption */
+		if ((addr & ~0x0f) == 0x50)
+			i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
+				       I2C_SMBUS_QUICK, NULL);
+	}
 
 	/* Finally call the custom detection function */
 	memset(&info, 0, sizeof(struct i2c_board_info));
@@ -1410,7 +1455,7 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 }
 EXPORT_SYMBOL_GPL(i2c_new_probed_device);
 
-struct i2c_adapter* i2c_get_adapter(int id)
+struct i2c_adapter *i2c_get_adapter(int id)
 {
 	struct i2c_adapter *adapter;
 
@@ -1437,7 +1482,7 @@ static u8 crc8(u16 data)
 {
 	int i;
 
-	for(i = 0; i < 8; i++) {
+	for (i = 0; i < 8; i++) {
 		if (data & 0x8000)
 			data = data ^ POLY;
 		data = data << 1;
@@ -1450,7 +1495,7 @@ static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
 {
 	int i;
 
-	for(i = 0; i < count; i++)
+	for (i = 0; i < count; i++)
 		crc = crc8((crc ^ p[i]) << 8);
 	return crc;
 }
@@ -1520,7 +1565,7 @@ EXPORT_SYMBOL(i2c_smbus_read_byte);
  */
 s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
 {
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
 	                      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
 }
 EXPORT_SYMBOL(i2c_smbus_write_byte);
@@ -1558,9 +1603,9 @@ s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
 {
 	union i2c_smbus_data data;
 	data.byte = value;
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
-	                      I2C_SMBUS_WRITE,command,
-	                      I2C_SMBUS_BYTE_DATA,&data);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BYTE_DATA, &data);
 }
 EXPORT_SYMBOL(i2c_smbus_write_byte_data);
 
@@ -1597,9 +1642,9 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
 {
 	union i2c_smbus_data data;
 	data.word = value;
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
-	                      I2C_SMBUS_WRITE,command,
-	                      I2C_SMBUS_WORD_DATA,&data);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_WORD_DATA, &data);
 }
 EXPORT_SYMBOL(i2c_smbus_write_word_data);
 
@@ -1676,9 +1721,9 @@ s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
 		length = I2C_SMBUS_BLOCK_MAX;
 	data.block[0] = length;
 	memcpy(&data.block[1], values, length);
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
-			      I2C_SMBUS_WRITE,command,
-			      I2C_SMBUS_BLOCK_DATA,&data);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BLOCK_DATA, &data);
 }
 EXPORT_SYMBOL(i2c_smbus_write_block_data);
 
@@ -1720,10 +1765,10 @@ EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
 
 /* Simulate a SMBus command using the i2c protocol
    No checking of parameters is done!  */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
-                                   unsigned short flags,
-                                   char read_write, u8 command, int size,
-                                   union i2c_smbus_data * data)
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
+				   unsigned short flags,
+				   char read_write, u8 command, int size,
+				   union i2c_smbus_data *data)
 {
 	/* So we need to generate a series of msgs. In the case of writing, we
 	  need to use only one message; when reading, we need two. We initialize
@@ -1731,7 +1776,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 	  simpler. */
 	unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
 	unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
-	int num = read_write == I2C_SMBUS_READ?2:1;
+	int num = read_write == I2C_SMBUS_READ ? 2 : 1;
 	struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
 	                          { addr, flags | I2C_M_RD, 0, msgbuf1 }
 	                        };
@@ -1740,7 +1785,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 	int status;
 
 	msgbuf0[0] = command;
-	switch(size) {
+	switch (size) {
 	case I2C_SMBUS_QUICK:
 		msg[0].len = 0;
 		/* Special case: The read/write field is used as data */
@@ -1767,7 +1812,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 		if (read_write == I2C_SMBUS_READ)
 			msg[1].len = 2;
 		else {
-			msg[0].len=3;
+			msg[0].len = 3;
 			msgbuf0[1] = data->word & 0xff;
 			msgbuf0[2] = data->word >> 8;
 		}
@@ -1860,26 +1905,26 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 	}
 
 	if (read_write == I2C_SMBUS_READ)
-		switch(size) {
-			case I2C_SMBUS_BYTE:
-				data->byte = msgbuf0[0];
-				break;
-			case I2C_SMBUS_BYTE_DATA:
-				data->byte = msgbuf1[0];
-				break;
-			case I2C_SMBUS_WORD_DATA:
-			case I2C_SMBUS_PROC_CALL:
-				data->word = msgbuf1[0] | (msgbuf1[1] << 8);
-				break;
-			case I2C_SMBUS_I2C_BLOCK_DATA:
-				for (i = 0; i < data->block[0]; i++)
-					data->block[i+1] = msgbuf1[i];
-				break;
-			case I2C_SMBUS_BLOCK_DATA:
-			case I2C_SMBUS_BLOCK_PROC_CALL:
-				for (i = 0; i < msgbuf1[0] + 1; i++)
-					data->block[i] = msgbuf1[i];
-				break;
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+			data->byte = msgbuf0[0];
+			break;
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = msgbuf1[0];
+			break;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < data->block[0]; i++)
+				data->block[i+1] = msgbuf1[i];
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			for (i = 0; i < msgbuf1[0] + 1; i++)
+				data->block[i] = msgbuf1[i];
+			break;
 		}
 	return 0;
 }
@@ -1924,7 +1969,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 		}
 		rt_mutex_unlock(&adapter->bus_lock);
 	} else
-		res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
+		res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
 					      command, protocol, data);
 
 	return res;
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index f4110aa49600..e0694e4d86c7 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -35,7 +35,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-dev.h>
 #include <linux/jiffies.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 static struct i2c_driver i2cdev_driver;
 
@@ -132,45 +132,45 @@ static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
  * needed by those system calls and by this SMBus interface.
  */
 
-static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
-                            loff_t *offset)
+static ssize_t i2cdev_read(struct file *file, char __user *buf, size_t count,
+		loff_t *offset)
 {
 	char *tmp;
 	int ret;
 
-	struct i2c_client *client = (struct i2c_client *)file->private_data;
+	struct i2c_client *client = file->private_data;
 
 	if (count > 8192)
 		count = 8192;
 
-	tmp = kmalloc(count,GFP_KERNEL);
-	if (tmp==NULL)
+	tmp = kmalloc(count, GFP_KERNEL);
+	if (tmp == NULL)
 		return -ENOMEM;
 
 	pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
-	ret = i2c_master_recv(client,tmp,count);
+	ret = i2c_master_recv(client, tmp, count);
 	if (ret >= 0)
-		ret = copy_to_user(buf,tmp,count)?-EFAULT:ret;
+		ret = copy_to_user(buf, tmp, count) ? -EFAULT : ret;
 	kfree(tmp);
 	return ret;
 }
 
-static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t count,
-                             loff_t *offset)
+static ssize_t i2cdev_write(struct file *file, const char __user *buf,
+		size_t count, loff_t *offset)
 {
 	int ret;
 	char *tmp;
-	struct i2c_client *client = (struct i2c_client *)file->private_data;
+	struct i2c_client *client = file->private_data;
 
 	if (count > 8192)
 		count = 8192;
 
-	tmp = kmalloc(count,GFP_KERNEL);
-	if (tmp==NULL)
+	tmp = kmalloc(count, GFP_KERNEL);
+	if (tmp == NULL)
 		return -ENOMEM;
-	if (copy_from_user(tmp,buf,count)) {
+	if (copy_from_user(tmp, buf, count)) {
 		kfree(tmp);
 		return -EFAULT;
 	}
@@ -178,7 +178,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c
 	pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
-	ret = i2c_master_send(client,tmp,count);
+	ret = i2c_master_send(client, tmp, count);
 	kfree(tmp);
 	return ret;
 }
@@ -369,13 +369,13 @@ static noinline int i2cdev_ioctl_smbus(struct i2c_client *client,
 
 static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct i2c_client *client = (struct i2c_client *)file->private_data;
+	struct i2c_client *client = file->private_data;
 	unsigned long funcs;
 
 	dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n",
 		cmd, arg);
 
-	switch ( cmd ) {
+	switch (cmd) {
 	case I2C_SLAVE:
 	case I2C_SLAVE_FORCE:
 		/* NOTE:  devices set up to work with "new style" drivers
@@ -601,7 +601,7 @@ static void __exit i2c_dev_exit(void)
 {
 	i2c_del_driver(&i2cdev_driver);
 	class_destroy(i2c_dev_class);
-	unregister_chrdev(I2C_MAJOR,"i2c");
+	unregister_chrdev(I2C_MAJOR, "i2c");
 }
 
 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "