hwmon: (tmp401) Add support for TI TMP461

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

2 files changed, 30 insertions, 7 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e0be99a4615c..be63b140a976 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1572,7 +1572,7 @@ config SENSORS_TMP401
 	depends on I2C
 	help
 	  If you say yes here you get support for Texas Instruments TMP401,
-	  TMP411, TMP431, TMP432 and TMP435 temperature sensor chips.
+	  TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp401.
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index ccf4cffe0ee1..eeeed2c7d081 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -47,7 +47,7 @@
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d,
 	0x4e, 0x4f, I2C_CLIENT_END };
 
-enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
+enum chips { tmp401, tmp411, tmp431, tmp432, tmp435, tmp461 };
 
 /*
  * The TMP401 registers, note some registers have different addresses for
@@ -62,31 +62,34 @@ enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
 #define TMP401_MANUFACTURER_ID_REG		0xFE
 #define TMP401_DEVICE_ID_REG			0xFF
 
-static const u8 TMP401_TEMP_MSB_READ[6][2] = {
+static const u8 TMP401_TEMP_MSB_READ[7][2] = {
 	{ 0x00, 0x01 },	/* temp */
 	{ 0x06, 0x08 },	/* low limit */
 	{ 0x05, 0x07 },	/* high limit */
 	{ 0x20, 0x19 },	/* therm (crit) limit */
 	{ 0x30, 0x34 },	/* lowest */
 	{ 0x32, 0x36 },	/* highest */
+	{ 0, 0x11 },	/* offset */
 };
 
-static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
+static const u8 TMP401_TEMP_MSB_WRITE[7][2] = {
 	{ 0, 0 },	/* temp (unused) */
 	{ 0x0C, 0x0E },	/* low limit */
 	{ 0x0B, 0x0D },	/* high limit */
 	{ 0x20, 0x19 },	/* therm (crit) limit */
 	{ 0x30, 0x34 },	/* lowest */
 	{ 0x32, 0x36 },	/* highest */
+	{ 0, 0x11 },	/* offset */
 };
 
-static const u8 TMP401_TEMP_LSB[6][2] = {
+static const u8 TMP401_TEMP_LSB[7][2] = {
 	{ 0x15, 0x10 },	/* temp */
 	{ 0x17, 0x14 },	/* low limit */
 	{ 0x16, 0x13 },	/* high limit */
 	{ 0, 0 },	/* therm (crit) limit (unused) */
 	{ 0x31, 0x35 },	/* lowest */
 	{ 0x33, 0x37 },	/* highest */
+	{ 0, 0x12 },	/* offset */
 };
 
 static const u8 TMP432_TEMP_MSB_READ[4][3] = {
@@ -149,6 +152,7 @@ static const struct i2c_device_id tmp401_id[] = {
 	{ "tmp431", tmp431 },
 	{ "tmp432", tmp432 },
 	{ "tmp435", tmp435 },
+	{ "tmp461", tmp461 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tmp401_id);
@@ -170,7 +174,7 @@ struct tmp401_data {
 	/* register values */
 	u8 status[4];
 	u8 config;
-	u16 temp[6][3];
+	u16 temp[7][3];
 	u8 temp_crit_hyst;
 };
 
@@ -613,6 +617,22 @@ static const struct attribute_group tmp432_group = {
 };
 
 /*
+ * Additional features of the TMP461 chip.
+ * The TMP461 temperature offset for the remote channel.
+ */
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp,
+			    store_temp, 6, 1);
+
+static struct attribute *tmp461_attributes[] = {
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tmp461_group = {
+	.attrs = tmp461_attributes,
+};
+
+/*
  * Begin non sysfs callback code (aka Real code)
  */
 
@@ -714,7 +734,7 @@ static int tmp401_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	static const char * const names[] = {
-		"TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
+		"TMP401", "TMP411", "TMP431", "TMP432", "TMP435", "TMP461"
 	};
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
@@ -745,6 +765,9 @@ static int tmp401_probe(struct i2c_client *client,
 	if (data->kind == tmp432)
 		data->groups[groups++] = &tmp432_group;
 
+	if (data->kind == tmp461)
+		data->groups[groups++] = &tmp461_group;
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data, data->groups);
 	if (IS_ERR(hwmon_dev))