Merge tag 'drm-intel-next-2022-06-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- General driver clean-up (Jani, Ville, Julia)
- DG2 enabling (Anusha, Vandita)
- Fix sparse warnings (Imre, Jani)
- DMC MMIO range checks (Anusha)
- Audio related fixes (Jani)
- Runtime PM fixes (Anshuman)
- PSR fixes (Jouni, Jose)
- Media freq factor and per-gt enhancements (Ashutosh, Dale)
- DSI fixes for ICL+ (Jani)
- Disable DMC flip queue handlers (Imre)
- ADL_P voltage swing updates (Balasubramani)
- Use more the VBT for panel information (Ville, Animesh)
- Fix on Type-C ports with TBT mode (Vivek)
- Improve fastset and allow seamless M/N changes (Ville)
- Accept more fixed modes with VRR/DMRRS panels (Ville)
- FBC fix (Jose)
- Remove noise logs (Luca)
- Disable connector polling for a headless SKU (Jouni)
- Sanitize display underrun reporting (Ville)
- ADL-S display PLL w/a (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrNzP2WTf3WBvpvd@intel.com

1 files changed, 21 insertions, 31 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 9e6fa59eabba..272e1bf6006b 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -32,6 +32,7 @@
 
 #include "i915_drv.h"
 #include "intel_audio.h"
+#include "intel_audio_regs.h"
 #include "intel_backlight.h"
 #include "intel_combo_phy.h"
 #include "intel_combo_phy_regs.h"
@@ -322,14 +323,10 @@ static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
 	}
 }
 
-static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
+int intel_crtc_dotclock(const struct intel_crtc_state *pipe_config)
 {
 	int dotclock;
 
-	/* CRT dotclock is determined via other means */
-	if (pipe_config->has_pch_encoder)
-		return;
-
 	if (intel_crtc_has_dp_encoder(pipe_config))
 		dotclock = intel_dotclock_calculate(pipe_config->port_clock,
 						    &pipe_config->dp_m_n);
@@ -345,7 +342,17 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
 	if (pipe_config->pixel_multiplier)
 		dotclock /= pipe_config->pixel_multiplier;
 
-	pipe_config->hw.adjusted_mode.crtc_clock = dotclock;
+	return dotclock;
+}
+
+static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
+{
+	/* CRT dotclock is determined via other means */
+	if (pipe_config->has_pch_encoder)
+		return;
+
+	pipe_config->hw.adjusted_mode.crtc_clock =
+		intel_crtc_dotclock(pipe_config);
 }
 
 void intel_ddi_set_dp_msa(const struct intel_crtc_state *crtc_state,
@@ -455,6 +462,9 @@ intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder,
 		temp |= TRANS_DDI_SELECT_PORT(port);
 
 	switch (crtc_state->pipe_bpp) {
+	default:
+		MISSING_CASE(crtc_state->pipe_bpp);
+		fallthrough;
 	case 18:
 		temp |= TRANS_DDI_BPC_6;
 		break;
@@ -467,8 +477,6 @@ intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder,
 	case 36:
 		temp |= TRANS_DDI_BPC_12;
 		break;
-	default:
-		BUG();
 	}
 
 	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC)
@@ -478,6 +486,9 @@ intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder,
 
 	if (cpu_transcoder == TRANSCODER_EDP) {
 		switch (pipe) {
+		default:
+			MISSING_CASE(pipe);
+			fallthrough;
 		case PIPE_A:
 			/* On Haswell, can only use the always-on power well for
 			 * eDP when not using the panel fitter, and when not
@@ -494,9 +505,6 @@ intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder,
 		case PIPE_C:
 			temp |= TRANS_DDI_EDP_INPUT_C_ONOFF;
 			break;
-		default:
-			BUG();
-			break;
 		}
 	}
 
@@ -3433,26 +3441,8 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
 	pipe_config->has_audio =
 		intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder);
 
-	if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp &&
-	    pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) {
-		/*
-		 * This is a big fat ugly hack.
-		 *
-		 * Some machines in UEFI boot mode provide us a VBT that has 18
-		 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
-		 * unknown we fail to light up. Yet the same BIOS boots up with
-		 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
-		 * max, not what it tells us to use.
-		 *
-		 * Note: This will still be broken if the eDP panel is not lit
-		 * up by the BIOS, and thus we can't get the mode at module
-		 * load.
-		 */
-		drm_dbg_kms(&dev_priv->drm,
-			    "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
-			    pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
-		dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
-	}
+	if (encoder->type == INTEL_OUTPUT_EDP)
+		intel_edp_fixup_vbt_bpp(encoder, pipe_config->pipe_bpp);
 
 	ddi_dotclock_get(pipe_config);