Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It's a relatively calm development cycle, but still lots of updates in
  the driver side like Intel SOF. Below are some highlights:

  ALSA / ASoC core:
   - A new kselftest for ALSA control API
   - PCM NO_REWINDS support
   - Potential race fixes around control removals
   - Unify x86 SG-buffer memory allocation code
   - Cleanups and race fixes for ASoC DPCM locking

  ASoC:
   - Refinements and cleanups around the delay() APIs
   - Wider use of dev_err_probe().
   - Continuing cleanups and improvements to the SOF code
   - Support for pin switches in simple-card derived cards
   - Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
     systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
     S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
     TLV320ADC3xxx

  HD-audio / USB-audio:
   - Fix deadlock at HD-audio codec unbinding
   - Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
   - Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device

  Misc:
   - Fix virmidi drain behavior

  Note that the merge of CS35L41 codec support is still half-baked, and
  at least one ACPI change is missing. Although this won't hinder the
  kernel build itself, we're going to catch up before RC1"

* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
  ALSA: hda: intel-dsp-config: reorder the config table
  ALSA: hda: intel-dsp-config: add JasperLake support
  ALSA: hda: cs35l41: fix double free on error in probe()
  ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
  ALSA: hda: Fix dependency on ASoC cs35l41 codec
  ASoC: cs35l41: Add support for hibernate memory retention mode
  ASoC: cs35l41: Update handling of test key registers
  ALSA: intel_hdmi: Check for error num after setting mask
  ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
  ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
  ALSA: virmidi: Remove duplicated code
  ALSA: seq: virmidi: Add a drain operation
  ASoC: topology: Fix typo
  ASoC: fsl_asrc: refine the check of available clock divider
  ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
  ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
  ASoC: rt5640: Add support for boards with an external jack-detect GPIO
  ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
  ASoC: rt5640: Change jack_work to a delayed_work
  ASoC: rt5640: Fix possible NULL pointer deref on resume
  ...

7 files changed, 60 insertions, 43 deletions

diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index a23563cd118b..5a53d7fcef01 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -727,12 +727,6 @@ static int mmp_pdma_config_write(struct dma_chan *dchan,
 
 	chan->dir = direction;
 	chan->dev_addr = addr;
-	/* FIXME: drivers should be ported over to use the filter
-	 * function. Once that's done, the following two lines can
-	 * be removed.
-	 */
-	if (cfg->slave_id)
-		chan->drcmr = cfg->slave_id;
 
 	return 0;
 }
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 52d04641e361..6078cc81892e 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -909,13 +909,6 @@ static void pxad_get_config(struct pxad_chan *chan,
 		*dcmd |= PXA_DCMD_BURST16;
 	else if (maxburst == 32)
 		*dcmd |= PXA_DCMD_BURST32;
-
-	/* FIXME: drivers should be ported over to use the filter
-	 * function. Once that's done, the following two lines can
-	 * be removed.
-	 */
-	if (chan->cfg.slave_id)
-		chan->drcmr = chan->cfg.slave_id;
 }
 
 static struct dma_async_tx_descriptor *
diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c
index ee78bed8d60d..facdacf8aede 100644
--- a/drivers/dma/qcom/qcom_adm.c
+++ b/drivers/dma/qcom/qcom_adm.c
@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma/qcom_adm.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -140,6 +141,8 @@ struct adm_chan {
 
 	struct adm_async_desc *curr_txd;
 	struct dma_slave_config slave;
+	u32 crci;
+	u32 mux;
 	struct list_head node;
 
 	int error;
@@ -379,8 +382,8 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 			return ERR_PTR(-EINVAL);
 		}
 
-		crci = achan->slave.slave_id & 0xf;
-		if (!crci || achan->slave.slave_id > 0x1f) {
+		crci = achan->crci & 0xf;
+		if (!crci || achan->crci > 0x1f) {
 			dev_err(adev->dev, "invalid crci value\n");
 			return ERR_PTR(-EINVAL);
 		}
@@ -403,9 +406,7 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 	if (!async_desc)
 		return ERR_PTR(-ENOMEM);
 
-	if (crci)
-		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
-					ADM_CRCI_CTL_MUX_SEL : 0;
+	async_desc->mux = achan->mux ? ADM_CRCI_CTL_MUX_SEL : 0;
 	async_desc->crci = crci;
 	async_desc->blk_size = blk_size;
 	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
@@ -488,10 +489,13 @@ static int adm_terminate_all(struct dma_chan *chan)
 static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
 {
 	struct adm_chan *achan = to_adm_chan(chan);
+	struct qcom_adm_peripheral_config *config = cfg->peripheral_config;
 	unsigned long flag;
 
 	spin_lock_irqsave(&achan->vc.lock, flag);
 	memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+	if (cfg->peripheral_size == sizeof(config))
+		achan->crci = config->crci;
 	spin_unlock_irqrestore(&achan->vc.lock, flag);
 
 	return 0;
@@ -694,6 +698,45 @@ static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
 	achan->vc.desc_free = adm_dma_free_desc;
 }
 
+/**
+ * adm_dma_xlate
+ * @dma_spec:	pointer to DMA specifier as found in the device tree
+ * @ofdma:	pointer to DMA controller data
+ *
+ * This can use either 1-cell or 2-cell formats, the first cell
+ * identifies the slave device, while the optional second cell
+ * contains the crci value.
+ *
+ * Returns pointer to appropriate dma channel on success or NULL on error.
+ */
+static struct dma_chan *adm_dma_xlate(struct of_phandle_args *dma_spec,
+			       struct of_dma *ofdma)
+{
+	struct dma_device *dev = ofdma->of_dma_data;
+	struct dma_chan *chan, *candidate = NULL;
+	struct adm_chan *achan;
+
+	if (!dev || dma_spec->args_count > 2)
+		return NULL;
+
+	list_for_each_entry(chan, &dev->channels, device_node)
+		if (chan->chan_id == dma_spec->args[0]) {
+			candidate = chan;
+			break;
+		}
+
+	if (!candidate)
+		return NULL;
+
+	achan = to_adm_chan(candidate);
+	if (dma_spec->args_count == 2)
+		achan->crci = dma_spec->args[1];
+	else
+		achan->crci = 0;
+
+	return dma_get_slave_channel(candidate);
+}
+
 static int adm_dma_probe(struct platform_device *pdev)
 {
 	struct adm_device *adev;
@@ -838,8 +881,7 @@ static int adm_dma_probe(struct platform_device *pdev)
 		goto err_disable_clks;
 	}
 
-	ret = of_dma_controller_register(pdev->dev.of_node,
-					 of_dma_xlate_by_chan_id,
+	ret = of_dma_controller_register(pdev->dev.of_node, adm_dma_xlate,
 					 &adev->common);
 	if (ret)
 		goto err_unregister_dma;
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 7f72b3f4cd1a..41c6bc650fa3 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -787,14 +787,6 @@ static int shdma_config(struct dma_chan *chan,
 		return -EINVAL;
 
 	/*
-	 * overriding the slave_id through dma_slave_config is deprecated,
-	 * but possibly some out-of-tree drivers still do it.
-	 */
-	if (WARN_ON_ONCE(config->slave_id &&
-			 config->slave_id != schan->real_slave_id))
-		schan->real_slave_id = config->slave_id;
-
-	/*
 	 * We could lock this, but you shouldn't be configuring the
 	 * channel, while using it...
 	 */
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 4357d2395e6b..7f158ef5672d 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -795,9 +795,6 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 		return dst_datawidth;
 	}
 
-	if (slave_cfg->slave_id)
-		schan->dev_id = slave_cfg->slave_id;
-
 	hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
 
 	/*
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index b7260749e8ee..eaafcbe4ca94 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -343,12 +343,6 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
 	}
 
 	memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
-	if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID &&
-	    sconfig->device_fc) {
-		if (sconfig->slave_id > TEGRA_APBDMA_CSR_REQ_SEL_MASK)
-			return -EINVAL;
-		tdc->slave_id = sconfig->slave_id;
-	}
 	tdc->config_init = true;
 
 	return 0;
diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
index ce5c66e6897d..b0f4948b00a5 100644
--- a/drivers/dma/xilinx/xilinx_dpdma.c
+++ b/drivers/dma/xilinx/xilinx_dpdma.c
@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/dma/xilinx_dpdma.h>
 #include <linux/dmaengine.h>
 #include <linux/dmapool.h>
 #include <linux/interrupt.h>
@@ -1273,6 +1274,7 @@ static int xilinx_dpdma_config(struct dma_chan *dchan,
 			       struct dma_slave_config *config)
 {
 	struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
+	struct xilinx_dpdma_peripheral_config *pconfig;
 	unsigned long flags;
 
 	/*
@@ -1282,15 +1284,18 @@ static int xilinx_dpdma_config(struct dma_chan *dchan,
 	 * fixed both on the DPDMA side and on the DP controller side.
 	 */
 
-	spin_lock_irqsave(&chan->lock, flags);
-
 	/*
-	 * Abuse the slave_id to indicate that the channel is part of a video
-	 * group.
+	 * Use the peripheral_config to indicate that the channel is part
+	 * of a video group. This requires matching use of the custom
+	 * structure in each driver.
 	 */
-	if (chan->id <= ZYNQMP_DPDMA_VIDEO2)
-		chan->video_group = config->slave_id != 0;
+	pconfig = config->peripheral_config;
+	if (WARN_ON(pconfig && config->peripheral_size != sizeof(*pconfig)))
+		return -EINVAL;
 
+	spin_lock_irqsave(&chan->lock, flags);
+	if (chan->id <= ZYNQMP_DPDMA_VIDEO2 && pconfig)
+		chan->video_group = pconfig->video_group;
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	return 0;