[CPUFREQ] Move x86 drivers to drivers/cpufreq/

Signed-off-by: Dave Jones <davej@redhat.com>

1 files changed, 222 insertions, 0 deletions

diff --git a/drivers/cpufreq/powernow-k8.h b/drivers/cpufreq/powernow-k8.h
new file mode 100644
index 000000000000..3744d26cdc2b
--- /dev/null
+++ b/drivers/cpufreq/powernow-k8.h
@@ -0,0 +1,222 @@
+/*
+ *  (c) 2003-2006 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+enum pstate {
+	HW_PSTATE_INVALID = 0xff,
+	HW_PSTATE_0 = 0,
+	HW_PSTATE_1 = 1,
+	HW_PSTATE_2 = 2,
+	HW_PSTATE_3 = 3,
+	HW_PSTATE_4 = 4,
+	HW_PSTATE_5 = 5,
+	HW_PSTATE_6 = 6,
+	HW_PSTATE_7 = 7,
+};
+
+struct powernow_k8_data {
+	unsigned int cpu;
+
+	u32 numps;  /* number of p-states */
+	u32 batps;  /* number of p-states supported on battery */
+	u32 max_hw_pstate; /* maximum legal hardware pstate */
+
+	/* these values are constant when the PSB is used to determine
+	 * vid/fid pairings, but are modified during the ->target() call
+	 * when ACPI is used */
+	u32 rvo;     /* ramp voltage offset */
+	u32 irt;     /* isochronous relief time */
+	u32 vidmvs;  /* usable value calculated from mvs */
+	u32 vstable; /* voltage stabilization time, units 20 us */
+	u32 plllock; /* pll lock time, units 1 us */
+        u32 exttype; /* extended interface = 1 */
+
+	/* keep track of the current fid / vid or pstate */
+	u32 currvid;
+	u32 currfid;
+	enum pstate currpstate;
+
+	/* the powernow_table includes all frequency and vid/fid pairings:
+	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
+	 * frequency is in kHz */
+	struct cpufreq_frequency_table  *powernow_table;
+
+	/* the acpi table needs to be kept. it's only available if ACPI was
+	 * used to determine valid frequency/vid/fid states */
+	struct acpi_processor_performance acpi_data;
+
+	/* we need to keep track of associated cores, but let cpufreq
+	 * handle hotplug events - so just point at cpufreq pol->cpus
+	 * structure */
+	struct cpumask *available_cores;
+};
+
+/* processor's cpuid instruction support */
+#define CPUID_PROCESSOR_SIGNATURE	1	/* function 1 */
+#define CPUID_XFAM			0x0ff00000	/* extended family */
+#define CPUID_XFAM_K8			0
+#define CPUID_XMOD			0x000f0000	/* extended model */
+#define CPUID_XMOD_REV_MASK		0x000c0000
+#define CPUID_XFAM_10H			0x00100000	/* family 0x10 */
+#define CPUID_USE_XFAM_XMOD		0x00000f00
+#define CPUID_GET_MAX_CAPABILITIES	0x80000000
+#define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
+#define P_STATE_TRANSITION_CAPABLE	6
+
+/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For     */
+/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and   */
+/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */
+/* the register number is placed in ecx, and the data is returned in edx:eax. */
+
+#define MSR_FIDVID_CTL      0xc0010041
+#define MSR_FIDVID_STATUS   0xc0010042
+
+/* Field definitions within the FID VID Low Control MSR : */
+#define MSR_C_LO_INIT_FID_VID     0x00010000
+#define MSR_C_LO_NEW_VID          0x00003f00
+#define MSR_C_LO_NEW_FID          0x0000003f
+#define MSR_C_LO_VID_SHIFT        8
+
+/* Field definitions within the FID VID High Control MSR : */
+#define MSR_C_HI_STP_GNT_TO	  0x000fffff
+
+/* Field definitions within the FID VID Low Status MSR : */
+#define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x3f000000
+#define MSR_S_LO_MAX_FID          0x003f0000
+#define MSR_S_LO_START_FID        0x00003f00
+#define MSR_S_LO_CURRENT_FID      0x0000003f
+
+/* Field definitions within the FID VID High Status MSR : */
+#define MSR_S_HI_MIN_WORKING_VID  0x3f000000
+#define MSR_S_HI_MAX_WORKING_VID  0x003f0000
+#define MSR_S_HI_START_VID        0x00003f00
+#define MSR_S_HI_CURRENT_VID      0x0000003f
+#define MSR_C_HI_STP_GNT_BENIGN	  0x00000001
+
+
+/* Hardware Pstate _PSS and MSR definitions */
+#define USE_HW_PSTATE		0x00000080
+#define HW_PSTATE_MASK 		0x00000007
+#define HW_PSTATE_VALID_MASK 	0x80000000
+#define HW_PSTATE_MAX_MASK	0x000000f0
+#define HW_PSTATE_MAX_SHIFT	4
+#define MSR_PSTATE_DEF_BASE 	0xc0010064 /* base of Pstate MSRs */
+#define MSR_PSTATE_STATUS 	0xc0010063 /* Pstate Status MSR */
+#define MSR_PSTATE_CTRL 	0xc0010062 /* Pstate control MSR */
+#define MSR_PSTATE_CUR_LIMIT	0xc0010061 /* pstate current limit MSR */
+
+/* define the two driver architectures */
+#define CPU_OPTERON 0
+#define CPU_HW_PSTATE 1
+
+
+/*
+ * There are restrictions frequencies have to follow:
+ * - only 1 entry in the low fid table ( <=1.4GHz )
+ * - lowest entry in the high fid table must be >= 2 * the entry in the
+ *   low fid table
+ * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
+ *   in the low fid table
+ * - the parts can only step at <= 200 MHz intervals, odd fid values are
+ *   supported in revision G and later revisions.
+ * - lowest frequency must be >= interprocessor hypertransport link speed
+ *   (only applies to MP systems obviously)
+ */
+
+/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
+#define LO_FID_TABLE_TOP     7	/* fid values marking the boundary    */
+#define HI_FID_TABLE_BOTTOM  8	/* between the low and high tables    */
+
+#define LO_VCOFREQ_TABLE_TOP    1400	/* corresponding vco frequency values */
+#define HI_VCOFREQ_TABLE_BOTTOM 1600
+
+#define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
+
+#define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
+#define LEAST_VID 0x3e	/* Lowest (numerically highest) useful vid value */
+
+#define MIN_FREQ 800	/* Min and max freqs, per spec */
+#define MAX_FREQ 5000
+
+#define INVALID_FID_MASK 0xffffffc0  /* not a valid fid if these bits are set */
+#define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
+
+#define VID_OFF 0x3f
+
+#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
+
+#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
+
+#define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
+#define VST_UNITS_20US 20   /* Voltage Stabilization Time is in units of 20us */
+
+/*
+ * Most values of interest are encoded in a single field of the _PSS
+ * entries: the "control" value.
+ */
+
+#define IRT_SHIFT      30
+#define RVO_SHIFT      28
+#define EXT_TYPE_SHIFT 27
+#define PLL_L_SHIFT    20
+#define MVS_SHIFT      18
+#define VST_SHIFT      11
+#define VID_SHIFT       6
+#define IRT_MASK        3
+#define RVO_MASK        3
+#define EXT_TYPE_MASK   1
+#define PLL_L_MASK   0x7f
+#define MVS_MASK        3
+#define VST_MASK     0x7f
+#define VID_MASK     0x1f
+#define FID_MASK     0x1f
+#define EXT_VID_MASK 0x3f
+#define EXT_FID_MASK 0x3f
+
+
+/*
+ * Version 1.4 of the PSB table. This table is constructed by BIOS and is
+ * to tell the OS's power management driver which VIDs and FIDs are
+ * supported by this particular processor.
+ * If the data in the PSB / PST is wrong, then this driver will program the
+ * wrong values into hardware, which is very likely to lead to a crash.
+ */
+
+#define PSB_ID_STRING      "AMDK7PNOW!"
+#define PSB_ID_STRING_LEN  10
+
+#define PSB_VERSION_1_4  0x14
+
+struct psb_s {
+	u8 signature[10];
+	u8 tableversion;
+	u8 flags1;
+	u16 vstable;
+	u8 flags2;
+	u8 num_tables;
+	u32 cpuid;
+	u8 plllocktime;
+	u8 maxfid;
+	u8 maxvid;
+	u8 numps;
+};
+
+/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */
+struct pst_s {
+	u8 fid;
+	u8 vid;
+};
+
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+	u32 reqvid, u32 regfid);
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+
+static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);