Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...

12 files changed, 64 insertions, 1817 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 26956c006987..fea084e0909b 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -7,28 +7,6 @@ menu "Character devices"
 
 source "drivers/tty/Kconfig"
 
-config DEVMEM
-	bool "/dev/mem virtual device support"
-	default y
-	help
-	  Say Y here if you want to support the /dev/mem device.
-	  The /dev/mem device is used to access areas of physical
-	  memory.
-	  When in doubt, say "Y".
-
-config DEVKMEM
-	bool "/dev/kmem virtual device support"
-	# On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write
-	depends on !ARM64
-	help
-	  Say Y here if you want to support the /dev/kmem device. The
-	  /dev/kmem device is rarely used, but can be used for certain
-	  kind of kernel debugging operations.
-	  When in doubt, say "N".
-
-source "drivers/tty/serial/Kconfig"
-source "drivers/tty/serdev/Kconfig"
-
 config TTY_PRINTK
 	tristate "TTY driver to output user messages via printk"
 	depends on EXPERT && TTY
@@ -113,8 +91,6 @@ config PPDEV
 
 	  If unsure, say N.
 
-source "drivers/tty/hvc/Kconfig"
-
 config VIRTIO_CONSOLE
 	tristate "Virtio console"
 	depends on VIRTIO && TTY
@@ -220,89 +196,6 @@ config NWFLASH
 
 source "drivers/char/hw_random/Kconfig"
 
-config NVRAM
-	tristate "/dev/nvram support"
-	depends on X86 || HAVE_ARCH_NVRAM_OPS
-	default M68K || PPC
-	---help---
-	  If you say Y here and create a character special file /dev/nvram
-	  with major number 10 and minor number 144 using mknod ("man mknod"),
-	  you get read and write access to the non-volatile memory.
-
-	  /dev/nvram may be used to view settings in NVRAM or to change them
-	  (with some utility). It could also be used to frequently
-	  save a few bits of very important data that may not be lost over
-	  power-off and for which writing to disk is too insecure. Note
-	  however that most NVRAM space in a PC belongs to the BIOS and you
-	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
-	  for a guide to the use of CMOS bytes by your BIOS.
-
-	  This memory is conventionally called "NVRAM" on PowerPC machines,
-	  "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called nvram.
-
-#
-# These legacy RTC drivers just cause too many conflicts with the generic
-# RTC framework ... let's not even try to coexist any more.
-#
-if RTC_LIB=n
-
-config RTC
-	tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
-	depends on ALPHA
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you run Linux on a multiprocessor machine and said Y to
-	  "Symmetric Multi Processing" above, you should say Y here to read
-	  and set the RTC in an SMP compatible fashion.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
-	  for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rtc.
-
-config JS_RTC
-	tristate "Enhanced Real Time Clock Support"
-	depends on SPARC32 && PCI
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
-	  for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called js-rtc.
-
-config EFI_RTC
-	bool "EFI Real Time Clock Services"
-	depends on IA64
-
-endif # RTC_LIB
-
 config DTLK
 	tristate "Double Talk PC internal speech card support"
 	depends on ISA
@@ -431,6 +324,48 @@ config NSC_GPIO
 	  pc8736x_gpio drivers.  If those drivers are built as
 	  modules, this one will be too, named nsc_gpio
 
+config DEVMEM
+	bool "/dev/mem virtual device support"
+	default y
+	help
+	  Say Y here if you want to support the /dev/mem device.
+	  The /dev/mem device is used to access areas of physical
+	  memory.
+	  When in doubt, say "Y".
+
+config DEVKMEM
+	bool "/dev/kmem virtual device support"
+	# On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write
+	depends on !ARM64
+	help
+	  Say Y here if you want to support the /dev/kmem device. The
+	  /dev/kmem device is rarely used, but can be used for certain
+	  kind of kernel debugging operations.
+	  When in doubt, say "N".
+
+config NVRAM
+	tristate "/dev/nvram support"
+	depends on X86 || HAVE_ARCH_NVRAM_OPS
+	default M68K || PPC
+	---help---
+	  If you say Y here and create a character special file /dev/nvram
+	  with major number 10 and minor number 144 using mknod ("man mknod"),
+	  you get read and write access to the non-volatile memory.
+
+	  /dev/nvram may be used to view settings in NVRAM or to change them
+	  (with some utility). It could also be used to frequently
+	  save a few bits of very important data that may not be lost over
+	  power-off and for which writing to disk is too insecure. Note
+	  however that most NVRAM space in a PC belongs to the BIOS and you
+	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
+	  for a guide to the use of CMOS bytes by your BIOS.
+
+	  This memory is conventionally called "NVRAM" on PowerPC machines,
+	  "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvram.
+
 config RAW_DRIVER
 	tristate "RAW driver (/dev/raw/rawN)"
 	depends on BLOCK
@@ -452,6 +387,14 @@ config MAX_RAW_DEVS
 	  Default is 256. Increase this number in case you need lots of
 	  raw devices.
 
+config DEVPORT
+	bool "/dev/port character device"
+	depends on ISA || PCI
+	default y
+	help
+	  Say Y here if you want to support the /dev/port device. The /dev/port
+	  device is similar to /dev/mem, but for I/O ports.
+
 config HPET
 	bool "HPET - High Precision Event Timer" if (X86 || IA64)
 	default n
@@ -511,14 +454,6 @@ config TELCLOCK
 	  /sys/devices/platform/telco_clock, with a number of files for
 	  controlling the behavior of this hardware.
 
-config DEVPORT
-	bool "/dev/port character device"
-	depends on ISA || PCI
-	default y
-	help
-	  Say Y here if you want to support the /dev/port device. The /dev/port
-	  device is similar to /dev/mem, but for I/O ports.
-
 source "drivers/s390/char/Kconfig"
 
 source "drivers/char/xillybus/Kconfig"
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 7c5ea6f9df14..ffce287ef415 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -20,9 +20,7 @@ obj-$(CONFIG_APM_EMULATION)	+= apm-emulation.o
 obj-$(CONFIG_DTLK)		+= dtlk.o
 obj-$(CONFIG_APPLICOM)		+= applicom.o
 obj-$(CONFIG_SONYPI)		+= sonypi.o
-obj-$(CONFIG_RTC)		+= rtc.o
 obj-$(CONFIG_HPET)		+= hpet.o
-obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_XILINX_HWICAP)	+= xilinx_hwicap/
 obj-$(CONFIG_NVRAM)		+= nvram.o
 obj-$(CONFIG_TOSHIBA)		+= toshiba.o
@@ -46,9 +44,6 @@ obj-$(CONFIG_TCG_TPM)		+= tpm/
 
 obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
 
-obj-$(CONFIG_JS_RTC)		+= js-rtc.o
-js-rtc-y = rtc.o
-
 obj-$(CONFIG_XILLYBUS)		+= xillybus/
 obj-$(CONFIG_POWERNV_OP_PANEL)	+= powernv-op-panel.o
 obj-$(CONFIG_ADI)		+= adi.o
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 51121a4b82c7..14b2d8034c51 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -53,7 +53,6 @@
 #define MAX_BOARD 8		/* maximum of pc board possible */
 #define MAX_ISA_BOARD 4
 #define LEN_RAM_IO 0x800
-#define AC_MINOR 157
 
 #ifndef PCI_VENDOR_ID_APPLICOM
 #define PCI_VENDOR_ID_APPLICOM                0x1389
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
deleted file mode 100644
index 4f73064d0c6f..000000000000
--- a/drivers/char/efirtc.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * EFI Time Services Driver for Linux
- *
- * Copyright (C) 1999 Hewlett-Packard Co
- * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
- *
- * Based on skeleton from the drivers/char/rtc.c driver by P. Gortmaker
- *
- * This code provides an architected & portable interface to the real time
- * clock by using EFI instead of direct bit fiddling. The functionalities are 
- * quite different from the rtc.c driver. The only way to talk to the device 
- * is by using ioctl(). There is a /proc interface which provides the raw 
- * information.
- *
- * Please note that we have kept the API as close as possible to the
- * legacy RTC. The standard /sbin/hwclock program should work normally 
- * when used to get/set the time.
- *
- * NOTES:
- *	- Locking is required for safe execution of EFI calls with regards
- *	  to interrupts and SMP.
- *
- * TODO (December 1999):
- * 	- provide the API to set/get the WakeUp Alarm (different from the
- *	  rtc.c alarm).
- *	- SMP testing
- * 	- Add module support
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/rtc.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/efi.h>
-#include <linux/uaccess.h>
-
-
-#define EFI_RTC_VERSION		"0.4"
-
-#define EFI_ISDST (EFI_TIME_ADJUST_DAYLIGHT|EFI_TIME_IN_DAYLIGHT)
-/*
- * EFI Epoch is 1/1/1998
- */
-#define EFI_RTC_EPOCH		1998
-
-static DEFINE_SPINLOCK(efi_rtc_lock);
-
-static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg);
-
-#define is_leap(year) \
-          ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-
-static const unsigned short int __mon_yday[2][13] =
-{
-	/* Normal years.  */
-	{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
-	/* Leap years.  */  
-	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
-};
-
-/*
- * returns day of the year [0-365]
- */
-static inline int
-compute_yday(efi_time_t *eft)
-{
-	/* efi_time_t.month is in the [1-12] so, we need -1 */
-	return  __mon_yday[is_leap(eft->year)][eft->month-1]+ eft->day -1;
-}
-/*
- * returns day of the week [0-6] 0=Sunday
- *
- * Don't try to provide a year that's before 1998, please !
- */
-static int
-compute_wday(efi_time_t *eft)
-{
-	int y;
-	int ndays = 0;
-
-	if ( eft->year < 1998 ) {
-		printk(KERN_ERR "efirtc: EFI year < 1998, invalid date\n");
-		return -1;
-	}
-
-	for(y=EFI_RTC_EPOCH; y < eft->year; y++ ) {
-		ndays += 365 + (is_leap(y) ? 1 : 0);
-	}
-	ndays += compute_yday(eft);
-
-	/*
-	 * 4=1/1/1998 was a Thursday
-	 */
-	return (ndays + 4) % 7;
-}
-
-static void
-convert_to_efi_time(struct rtc_time *wtime, efi_time_t *eft)
-{
-
-	eft->year	= wtime->tm_year + 1900;
-	eft->month	= wtime->tm_mon + 1; 
-	eft->day	= wtime->tm_mday;
-	eft->hour	= wtime->tm_hour;
-	eft->minute	= wtime->tm_min;
-	eft->second 	= wtime->tm_sec;
-	eft->nanosecond = 0; 
-	eft->daylight	= wtime->tm_isdst ? EFI_ISDST: 0;
-	eft->timezone	= EFI_UNSPECIFIED_TIMEZONE;
-}
-
-static void
-convert_from_efi_time(efi_time_t *eft, struct rtc_time *wtime)
-{
-	memset(wtime, 0, sizeof(*wtime));
-	wtime->tm_sec  = eft->second;
-	wtime->tm_min  = eft->minute;
-	wtime->tm_hour = eft->hour;
-	wtime->tm_mday = eft->day;
-	wtime->tm_mon  = eft->month - 1;
-	wtime->tm_year = eft->year - 1900;
-
-	/* day of the week [0-6], Sunday=0 */
-	wtime->tm_wday = compute_wday(eft);
-
-	/* day in the year [1-365]*/
-	wtime->tm_yday = compute_yday(eft);
-
-
-	switch (eft->daylight & EFI_ISDST) {
-		case EFI_ISDST:
-			wtime->tm_isdst = 1;
-			break;
-		case EFI_TIME_ADJUST_DAYLIGHT:
-			wtime->tm_isdst = 0;
-			break;
-		default:
-			wtime->tm_isdst = -1;
-	}
-}
-
-static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
-{
-
-	efi_status_t	status;
-	unsigned long	flags;
-	efi_time_t	eft;
-	efi_time_cap_t	cap;
-	struct rtc_time	wtime;
-	struct rtc_wkalrm __user *ewp;
-	unsigned char	enabled, pending;
-
-	switch (cmd) {
-		case RTC_UIE_ON:
-		case RTC_UIE_OFF:
-		case RTC_PIE_ON:
-		case RTC_PIE_OFF:
-		case RTC_AIE_ON:
-		case RTC_AIE_OFF:
-		case RTC_ALM_SET:
-		case RTC_ALM_READ:
-		case RTC_IRQP_READ:
-		case RTC_IRQP_SET:
-		case RTC_EPOCH_READ:
-		case RTC_EPOCH_SET:
-			return -EINVAL;
-
-		case RTC_RD_TIME:
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-
-			status = efi.get_time(&eft, &cap);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			if (status != EFI_SUCCESS) {
-				/* should never happen */
-				printk(KERN_ERR "efitime: can't read time\n");
-				return -EINVAL;
-			}
-
-			convert_from_efi_time(&eft, &wtime);
-
- 			return copy_to_user((void __user *)arg, &wtime,
-					    sizeof (struct rtc_time)) ? - EFAULT : 0;
-
-		case RTC_SET_TIME:
-
-			if (!capable(CAP_SYS_TIME)) return -EACCES;
-
-			if (copy_from_user(&wtime, (struct rtc_time __user *)arg,
-					   sizeof(struct rtc_time)) )
-				return -EFAULT;
-
-			convert_to_efi_time(&wtime, &eft);
-
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-
-			status = efi.set_time(&eft);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			return status == EFI_SUCCESS ? 0 : -EINVAL;
-
-		case RTC_WKALM_SET:
-
-			if (!capable(CAP_SYS_TIME)) return -EACCES;
-
-			ewp = (struct rtc_wkalrm __user *)arg;
-
-			if (  get_user(enabled, &ewp->enabled)
-			   || copy_from_user(&wtime, &ewp->time, sizeof(struct rtc_time)) )
-				return -EFAULT;
-
-			convert_to_efi_time(&wtime, &eft);
-
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-			/*
-			 * XXX Fixme:
-			 * As of EFI 0.92 with the firmware I have on my
-			 * machine this call does not seem to work quite
-			 * right
-			 */
-			status = efi.set_wakeup_time((efi_bool_t)enabled, &eft);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			return status == EFI_SUCCESS ? 0 : -EINVAL;
-
-		case RTC_WKALM_RD:
-
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-
-			status = efi.get_wakeup_time((efi_bool_t *)&enabled, (efi_bool_t *)&pending, &eft);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			if (status != EFI_SUCCESS) return -EINVAL;
-
-			ewp = (struct rtc_wkalrm __user *)arg;
-
-			if (  put_user(enabled, &ewp->enabled)
-			   || put_user(pending, &ewp->pending)) return -EFAULT;
-
-			convert_from_efi_time(&eft, &wtime);
-
-			return copy_to_user(&ewp->time, &wtime,
-					    sizeof(struct rtc_time)) ? -EFAULT : 0;
-	}
-	return -ENOTTY;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations efi_rtc_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= efi_rtc_ioctl,
-	.llseek		= no_llseek,
-};
-
-static struct miscdevice efi_rtc_dev= {
-	EFI_RTC_MINOR,
-	"efirtc",
-	&efi_rtc_fops
-};
-
-/*
- *	We export RAW EFI information to /proc/driver/efirtc
- */
-static int efi_rtc_proc_show(struct seq_file *m, void *v)
-{
-	efi_time_t 	eft, alm;
-	efi_time_cap_t	cap;
-	efi_bool_t	enabled, pending;	
-	unsigned long	flags;
-
-	memset(&eft, 0, sizeof(eft));
-	memset(&alm, 0, sizeof(alm));
-	memset(&cap, 0, sizeof(cap));
-
-	spin_lock_irqsave(&efi_rtc_lock, flags);
-
-	efi.get_time(&eft, &cap);
-	efi.get_wakeup_time(&enabled, &pending, &alm);
-
-	spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-	seq_printf(m,
-		   "Time           : %u:%u:%u.%09u\n"
-		   "Date           : %u-%u-%u\n"
-		   "Daylight       : %u\n",
-		   eft.hour, eft.minute, eft.second, eft.nanosecond, 
-		   eft.year, eft.month, eft.day,
-		   eft.daylight);
-
-	if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE)
-		seq_puts(m, "Timezone       : unspecified\n");
-	else
-		/* XXX fixme: convert to string? */
-		seq_printf(m, "Timezone       : %u\n", eft.timezone);
-		
-
-	seq_printf(m,
-		   "Alarm Time     : %u:%u:%u.%09u\n"
-		   "Alarm Date     : %u-%u-%u\n"
-		   "Alarm Daylight : %u\n"
-		   "Enabled        : %s\n"
-		   "Pending        : %s\n",
-		   alm.hour, alm.minute, alm.second, alm.nanosecond, 
-		   alm.year, alm.month, alm.day, 
-		   alm.daylight,
-		   enabled == 1 ? "yes" : "no",
-		   pending == 1 ? "yes" : "no");
-
-	if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE)
-		seq_puts(m, "Timezone       : unspecified\n");
-	else
-		/* XXX fixme: convert to string? */
-		seq_printf(m, "Timezone       : %u\n", alm.timezone);
-
-	/*
-	 * now prints the capabilities
-	 */
-	seq_printf(m,
-		   "Resolution     : %u\n"
-		   "Accuracy       : %u\n"
-		   "SetstoZero     : %u\n",
-		   cap.resolution, cap.accuracy, cap.sets_to_zero);
-
-	return 0;
-}
-static int __init 
-efi_rtc_init(void)
-{
-	int ret;
-	struct proc_dir_entry *dir;
-
-	printk(KERN_INFO "EFI Time Services Driver v%s\n", EFI_RTC_VERSION);
-
-	ret = misc_register(&efi_rtc_dev);
-	if (ret) {
-		printk(KERN_ERR "efirtc: can't misc_register on minor=%d\n",
-				EFI_RTC_MINOR);
-		return ret;
-	}
-
-	dir = proc_create_single("driver/efirtc", 0, NULL, efi_rtc_proc_show);
-	if (dir == NULL) {
-		printk(KERN_ERR "efirtc: can't create /proc/driver/efirtc.\n");
-		misc_deregister(&efi_rtc_dev);
-		return -1;
-	}
-	return 0;
-}
-device_initcall(efi_rtc_init);
-
-/*
-MODULE_LICENSE("GPL");
-*/
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index a9d9f074fbd6..7d583222e8fa 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -75,7 +75,7 @@ struct vma_data {
 	enum mspec_page_type type; /* Type of pages allocated. */
 	unsigned long vm_start;	/* Original (unsplit) base. */
 	unsigned long vm_end;	/* Original (unsplit) end. */
-	unsigned long maddr[0];	/* Array of MSPEC addresses. */
+	unsigned long maddr[];	/* Array of MSPEC addresses. */
 };
 
 /*
diff --git a/drivers/char/nwbutton.h b/drivers/char/nwbutton.h
index 9dedfd7adc0e..f2b9fdc1f9ea 100644
--- a/drivers/char/nwbutton.h
+++ b/drivers/char/nwbutton.h
@@ -14,7 +14,6 @@
 #define NUM_PRESSES_REBOOT 2	/* How many presses to activate shutdown */
 #define BUTTON_DELAY 30 	/* How many jiffies for sequence to end */
 #define VERSION "0.3"		/* Driver version number */
-#define BUTTON_MINOR 158	/* Major 10, Minor 158, /dev/nwbutton */
 
 /* Structure definitions: */
 
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index a4a0797daa19..0973c2c2b01a 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -576,7 +576,7 @@ static const struct file_operations flash_fops =
 
 static struct miscdevice flash_miscdev =
 {
-	FLASH_MINOR,
+	NWFLASH_MINOR,
 	"nwflash",
 	&flash_fops
 };
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 15bf585af5d3..4edb4174a1e2 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -731,8 +731,9 @@ static void monitor_card(struct timer_list *t)
 	}
 
 	switch (dev->mstate) {
+	case M_CARDOFF: {
 		unsigned char flags0;
-	case M_CARDOFF:
+
 		DEBUGP(4, dev, "M_CARDOFF\n");
 		flags0 = inb(REG_FLAGS0(iobase));
 		if (flags0 & 0x02) {
@@ -755,6 +756,7 @@ static void monitor_card(struct timer_list *t)
 			dev->mdelay = T_50MSEC;
 		}
 		break;
+	}
 	case M_FETCH_ATR:
 		DEBUGP(4, dev, "M_FETCH_ATR\n");
 		xoutb(0x80, REG_FLAGS0(iobase));
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 2c2381a806ae..38b46c7d1737 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -355,14 +355,19 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct pp_struct *pp = file->private_data;
 	struct parport *port;
 	void __user *argp = (void __user *)arg;
+	struct ieee1284_info *info;
+	unsigned char reg;
+	unsigned char mask;
+	int mode;
+	s32 time32[2];
+	s64 time64[2];
+	struct timespec64 ts;
+	int ret;
 
 	/* First handle the cases that don't take arguments. */
 	switch (cmd) {
 	case PPCLAIM:
 	    {
-		struct ieee1284_info *info;
-		int ret;
-
 		if (pp->flags & PP_CLAIMED) {
 			dev_dbg(&pp->pdev->dev, "you've already got it!\n");
 			return -EINVAL;
@@ -513,15 +518,6 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	port = pp->pdev->port;
 	switch (cmd) {
-		struct ieee1284_info *info;
-		unsigned char reg;
-		unsigned char mask;
-		int mode;
-		s32 time32[2];
-		s64 time64[2];
-		struct timespec64 ts;
-		int ret;
-
 	case PPRSTATUS:
 		reg = parport_read_status(port);
 		if (copy_to_user(argp, &reg, sizeof(reg)))
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
deleted file mode 100644
index 3b91184b77ae..000000000000
--- a/drivers/char/rtc.c
+++ /dev/null
@@ -1,1311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *	Real Time Clock interface for Linux
- *
- *	Copyright (C) 1996 Paul Gortmaker
- *
- *	This driver allows use of the real time clock (built into
- *	nearly all computers) from user space. It exports the /dev/rtc
- *	interface supporting various ioctl() and also the
- *	/proc/driver/rtc pseudo-file for status information.
- *
- *	The ioctls can be used to set the interrupt behaviour and
- *	generation rate from the RTC via IRQ 8. Then the /dev/rtc
- *	interface can be used to make use of these timer interrupts,
- *	be they interval or alarm based.
- *
- *	The /dev/rtc interface will block on reads until an interrupt
- *	has been received. If a RTC interrupt has already happened,
- *	it will output an unsigned long and then block. The output value
- *	contains the interrupt status in the low byte and the number of
- *	interrupts since the last read in the remaining high bytes. The
- *	/dev/rtc interface can also be used with the select(2) call.
- *
- *	Based on other minimal char device drivers, like Alan's
- *	watchdog, Ted's random, etc. etc.
- *
- *	1.07	Paul Gortmaker.
- *	1.08	Miquel van Smoorenburg: disallow certain things on the
- *		DEC Alpha as the CMOS clock is also used for other things.
- *	1.09	Nikita Schmidt: epoch support and some Alpha cleanup.
- *	1.09a	Pete Zaitcev: Sun SPARC
- *	1.09b	Jeff Garzik: Modularize, init cleanup
- *	1.09c	Jeff Garzik: SMP cleanup
- *	1.10	Paul Barton-Davis: add support for async I/O
- *	1.10a	Andrea Arcangeli: Alpha updates
- *	1.10b	Andrew Morton: SMP lock fix
- *	1.10c	Cesar Barros: SMP locking fixes and cleanup
- *	1.10d	Paul Gortmaker: delete paranoia check in rtc_exit
- *	1.10e	Maciej W. Rozycki: Handle DECstation's year weirdness.
- *	1.11	Takashi Iwai: Kernel access functions
- *			      rtc_register/rtc_unregister/rtc_control
- *      1.11a   Daniele Bellucci: Audit create_proc_read_entry in rtc_init
- *	1.12	Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer
- *		CONFIG_HPET_EMULATE_RTC
- *	1.12a	Maciej W. Rozycki: Handle memory-mapped chips properly.
- *	1.12ac	Alan Cox: Allow read access to the day of week register
- *	1.12b	David John: Remove calls to the BKL.
- */
-
-#define RTC_VERSION		"1.12b"
-
-/*
- *	Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
- *	interrupts disabled. Due to the index-port/data-port (0x70/0x71)
- *	design of the RTC, we don't want two different things trying to
- *	get to it at once. (e.g. the periodic 11 min sync from
- *      kernel/time/ntp.c vs. this driver.)
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-#include <linux/sched/signal.h>
-#include <linux/sysctl.h>
-#include <linux/wait.h>
-#include <linux/bcd.h>
-#include <linux/delay.h>
-#include <linux/uaccess.h>
-#include <linux/ratelimit.h>
-
-#include <asm/current.h>
-
-#ifdef CONFIG_X86
-#include <asm/hpet.h>
-#endif
-
-#ifdef CONFIG_SPARC32
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <asm/io.h>
-
-static unsigned long rtc_port;
-static int rtc_irq;
-#endif
-
-#ifdef	CONFIG_HPET_EMULATE_RTC
-#undef	RTC_IRQ
-#endif
-
-#ifdef RTC_IRQ
-static int rtc_has_irq = 1;
-#endif
-
-#ifndef CONFIG_HPET_EMULATE_RTC
-#define is_hpet_enabled()			0
-#define hpet_set_alarm_time(hrs, min, sec)	0
-#define hpet_set_periodic_freq(arg)		0
-#define hpet_mask_rtc_irq_bit(arg)		0
-#define hpet_set_rtc_irq_bit(arg)		0
-#define hpet_rtc_timer_init()			do { } while (0)
-#define hpet_rtc_dropped_irq()			0
-#define hpet_register_irq_handler(h)		({ 0; })
-#define hpet_unregister_irq_handler(h)		({ 0; })
-#ifdef RTC_IRQ
-static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
-{
-	return 0;
-}
-#endif
-#endif
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static struct fasync_struct *rtc_async_queue;
-
-static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
-
-#ifdef RTC_IRQ
-static void rtc_dropped_irq(struct timer_list *unused);
-
-static DEFINE_TIMER(rtc_irq_timer, rtc_dropped_irq);
-#endif
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
-			size_t count, loff_t *ppos);
-
-static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static void rtc_get_rtc_time(struct rtc_time *rtc_tm);
-
-#ifdef RTC_IRQ
-static __poll_t rtc_poll(struct file *file, poll_table *wait);
-#endif
-
-static void get_rtc_alm_time(struct rtc_time *alm_tm);
-#ifdef RTC_IRQ
-static void set_rtc_irq_bit_locked(unsigned char bit);
-static void mask_rtc_irq_bit_locked(unsigned char bit);
-
-static inline void set_rtc_irq_bit(unsigned char bit)
-{
-	spin_lock_irq(&rtc_lock);
-	set_rtc_irq_bit_locked(bit);
-	spin_unlock_irq(&rtc_lock);
-}
-
-static void mask_rtc_irq_bit(unsigned char bit)
-{
-	spin_lock_irq(&rtc_lock);
-	mask_rtc_irq_bit_locked(bit);
-	spin_unlock_irq(&rtc_lock);
-}
-#endif
-
-#ifdef CONFIG_PROC_FS
-static int rtc_proc_show(struct seq_file *seq, void *v);
-#endif
-
-/*
- *	Bits in rtc_status. (6 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/
-#define RTC_TIMER_ON		0x02	/* missed irq timer active	*/
-
-/*
- * rtc_status is never changed by rtc_interrupt, and ioctl/open/close is
- * protected by the spin lock rtc_lock. However, ioctl can still disable the
- * timer in rtc_status and then with del_timer after the interrupt has read
- * rtc_status but before mod_timer is called, which would then reenable the
- * timer (but you would need to have an awful timing before you'd trip on it)
- */
-static unsigned long rtc_status;	/* bitmapped status byte.	*/
-static unsigned long rtc_freq;		/* Current periodic IRQ rate	*/
-static unsigned long rtc_irq_data;	/* our output to the world	*/
-static unsigned long rtc_max_user_freq = 64; /* > this, need CAP_SYS_RESOURCE */
-
-/*
- *	If this driver ever becomes modularised, it will be really nice
- *	to make the epoch retain its value across module reload...
- */
-
-static unsigned long epoch = 1900;	/* year corresponding to 0x00	*/
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-/*
- * Returns true if a clock update is in progress
- */
-static inline unsigned char rtc_is_updating(void)
-{
-	unsigned long flags;
-	unsigned char uip;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	return uip;
-}
-
-#ifdef RTC_IRQ
-/*
- *	A very tiny interrupt handler. It runs with interrupts disabled,
- *	but there is possibility of conflicting with the set_rtc_mmss()
- *	call (the rtc irq and the timer irq can easily run at the same
- *	time in two different CPUs). So we need to serialize
- *	accesses to the chip with the rtc_lock spinlock that each
- *	architecture should implement in the timer code.
- *	(See ./arch/XXXX/kernel/time.c for the set_rtc_mmss() function.)
- */
-
-static irqreturn_t rtc_interrupt(int irq, void *dev_id)
-{
-	/*
-	 *	Can be an alarm interrupt, update complete interrupt,
-	 *	or a periodic interrupt. We store the status in the
-	 *	low byte and the number of interrupts received since
-	 *	the last read in the remainder of rtc_irq_data.
-	 */
-
-	spin_lock(&rtc_lock);
-	rtc_irq_data += 0x100;
-	rtc_irq_data &= ~0xff;
-	if (is_hpet_enabled()) {
-		/*
-		 * In this case it is HPET RTC interrupt handler
-		 * calling us, with the interrupt information
-		 * passed as arg1, instead of irq.
-		 */
-		rtc_irq_data |= (unsigned long)irq & 0xF0;
-	} else {
-		rtc_irq_data |= (CMOS_READ(RTC_INTR_FLAGS) & 0xF0);
-	}
-
-	if (rtc_status & RTC_TIMER_ON)
-		mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
-
-	spin_unlock(&rtc_lock);
-
-	wake_up_interruptible(&rtc_wait);
-
-	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-
-	return IRQ_HANDLED;
-}
-#endif
-
-/*
- * sysctl-tuning infrastructure.
- */
-static struct ctl_table rtc_table[] = {
-	{
-		.procname	= "max-user-freq",
-		.data		= &rtc_max_user_freq,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{ }
-};
-
-static struct ctl_table rtc_root[] = {
-	{
-		.procname	= "rtc",
-		.mode		= 0555,
-		.child		= rtc_table,
-	},
-	{ }
-};
-
-static struct ctl_table dev_root[] = {
-	{
-		.procname	= "dev",
-		.mode		= 0555,
-		.child		= rtc_root,
-	},
-	{ }
-};
-
-static struct ctl_table_header *sysctl_header;
-
-static int __init init_sysctl(void)
-{
-    sysctl_header = register_sysctl_table(dev_root);
-    return 0;
-}
-
-static void __exit cleanup_sysctl(void)
-{
-    unregister_sysctl_table(sysctl_header);
-}
-
-/*
- *	Now all the various file operations that we export.
- */
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
-			size_t count, loff_t *ppos)
-{
-#ifndef RTC_IRQ
-	return -EIO;
-#else
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long data;
-	ssize_t retval;
-
-	if (rtc_has_irq == 0)
-		return -EIO;
-
-	/*
-	 * Historically this function used to assume that sizeof(unsigned long)
-	 * is the same in userspace and kernelspace.  This lead to problems
-	 * for configurations with multiple ABIs such a the MIPS o32 and 64
-	 * ABIs supported on the same kernel.  So now we support read of both
-	 * 4 and 8 bytes and assume that's the sizeof(unsigned long) in the
-	 * userspace ABI.
-	 */
-	if (count != sizeof(unsigned int) && count !=  sizeof(unsigned long))
-		return -EINVAL;
-
-	add_wait_queue(&rtc_wait, &wait);
-
-	do {
-		/* First make it right. Then make it fast. Putting this whole
-		 * block within the parentheses of a while would be too
-		 * confusing. And no, xchg() is not the answer. */
-
-		__set_current_state(TASK_INTERRUPTIBLE);
-
-		spin_lock_irq(&rtc_lock);
-		data = rtc_irq_data;
-		rtc_irq_data = 0;
-		spin_unlock_irq(&rtc_lock);
-
-		if (data != 0)
-			break;
-
-		if (file->f_flags & O_NONBLOCK) {
-			retval = -EAGAIN;
-			goto out;
-		}
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			goto out;
-		}
-		schedule();
-	} while (1);
-
-	if (count == sizeof(unsigned int)) {
-		retval = put_user(data,
-				  (unsigned int __user *)buf) ?: sizeof(int);
-	} else {
-		retval = put_user(data,
-				  (unsigned long __user *)buf) ?: sizeof(long);
-	}
-	if (!retval)
-		retval = count;
- out:
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&rtc_wait, &wait);
-
-	return retval;
-#endif
-}
-
-static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
-{
-	struct rtc_time wtime;
-
-#ifdef RTC_IRQ
-	if (rtc_has_irq == 0) {
-		switch (cmd) {
-		case RTC_AIE_OFF:
-		case RTC_AIE_ON:
-		case RTC_PIE_OFF:
-		case RTC_PIE_ON:
-		case RTC_UIE_OFF:
-		case RTC_UIE_ON:
-		case RTC_IRQP_READ:
-		case RTC_IRQP_SET:
-			return -EINVAL;
-		}
-	}
-#endif
-
-	switch (cmd) {
-#ifdef RTC_IRQ
-	case RTC_AIE_OFF:	/* Mask alarm int. enab. bit	*/
-	{
-		mask_rtc_irq_bit(RTC_AIE);
-		return 0;
-	}
-	case RTC_AIE_ON:	/* Allow alarm interrupts.	*/
-	{
-		set_rtc_irq_bit(RTC_AIE);
-		return 0;
-	}
-	case RTC_PIE_OFF:	/* Mask periodic int. enab. bit	*/
-	{
-		/* can be called from isr via rtc_control() */
-		unsigned long flags;
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		mask_rtc_irq_bit_locked(RTC_PIE);
-		if (rtc_status & RTC_TIMER_ON) {
-			rtc_status &= ~RTC_TIMER_ON;
-			del_timer(&rtc_irq_timer);
-		}
-		spin_unlock_irqrestore(&rtc_lock, flags);
-
-		return 0;
-	}
-	case RTC_PIE_ON:	/* Allow periodic ints		*/
-	{
-		/* can be called from isr via rtc_control() */
-		unsigned long flags;
-
-		/*
-		 * We don't really want Joe User enabling more
-		 * than 64Hz of interrupts on a multi-user machine.
-		 */
-		if (!kernel && (rtc_freq > rtc_max_user_freq) &&
-						(!capable(CAP_SYS_RESOURCE)))
-			return -EACCES;
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		if (!(rtc_status & RTC_TIMER_ON)) {
-			mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq +
-					2*HZ/100);
-			rtc_status |= RTC_TIMER_ON;
-		}
-		set_rtc_irq_bit_locked(RTC_PIE);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-
-		return 0;
-	}
-	case RTC_UIE_OFF:	/* Mask ints from RTC updates.	*/
-	{
-		mask_rtc_irq_bit(RTC_UIE);
-		return 0;
-	}
-	case RTC_UIE_ON:	/* Allow ints for RTC updates.	*/
-	{
-		set_rtc_irq_bit(RTC_UIE);
-		return 0;
-	}
-#endif
-	case RTC_ALM_READ:	/* Read the present alarm time */
-	{
-		/*
-		 * This returns a struct rtc_time. Reading >= 0xc0
-		 * means "don't care" or "match all". Only the tm_hour,
-		 * tm_min, and tm_sec values are filled in.
-		 */
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		get_rtc_alm_time(&wtime);
-		break;
-	}
-	case RTC_ALM_SET:	/* Store a time into the alarm */
-	{
-		/*
-		 * This expects a struct rtc_time. Writing 0xff means
-		 * "don't care" or "match all". Only the tm_hour,
-		 * tm_min and tm_sec are used.
-		 */
-		unsigned char hrs, min, sec;
-		struct rtc_time alm_tm;
-
-		if (copy_from_user(&alm_tm, (struct rtc_time __user *)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		hrs = alm_tm.tm_hour;
-		min = alm_tm.tm_min;
-		sec = alm_tm.tm_sec;
-
-		spin_lock_irq(&rtc_lock);
-		if (hpet_set_alarm_time(hrs, min, sec)) {
-			/*
-			 * Fallthru and set alarm time in CMOS too,
-			 * so that we will get proper value in RTC_ALM_READ
-			 */
-		}
-		if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) ||
-							RTC_ALWAYS_BCD) {
-			if (sec < 60)
-				sec = bin2bcd(sec);
-			else
-				sec = 0xff;
-
-			if (min < 60)
-				min = bin2bcd(min);
-			else
-				min = 0xff;
-
-			if (hrs < 24)
-				hrs = bin2bcd(hrs);
-			else
-				hrs = 0xff;
-		}
-		CMOS_WRITE(hrs, RTC_HOURS_ALARM);
-		CMOS_WRITE(min, RTC_MINUTES_ALARM);
-		CMOS_WRITE(sec, RTC_SECONDS_ALARM);
-		spin_unlock_irq(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		rtc_get_rtc_time(&wtime);
-		break;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-		unsigned char mon, day, hrs, min, sec, leap_yr;
-		unsigned char save_control, save_freq_select;
-		unsigned int yrs;
-#ifdef CONFIG_MACH_DECSTATION
-		unsigned int real_yrs;
-#endif
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		yrs = rtc_tm.tm_year + 1900;
-		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
-		day = rtc_tm.tm_mday;
-		hrs = rtc_tm.tm_hour;
-		min = rtc_tm.tm_min;
-		sec = rtc_tm.tm_sec;
-
-		if (yrs < 1970)
-			return -EINVAL;
-
-		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-		if ((mon > 12) || (day == 0))
-			return -EINVAL;
-
-		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-			return -EINVAL;
-
-		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-			return -EINVAL;
-
-		yrs -= epoch;
-		if (yrs > 255)		/* They are unsigned */
-			return -EINVAL;
-
-		spin_lock_irq(&rtc_lock);
-#ifdef CONFIG_MACH_DECSTATION
-		real_yrs = yrs;
-		yrs = 72;
-
-		/*
-		 * We want to keep the year set to 73 until March
-		 * for non-leap years, so that Feb, 29th is handled
-		 * correctly.
-		 */
-		if (!leap_yr && mon < 3) {
-			real_yrs--;
-			yrs = 73;
-		}
-#endif
-		/* These limits and adjustments are independent of
-		 * whether the chip is in binary mode or not.
-		 */
-		if (yrs > 169) {
-			spin_unlock_irq(&rtc_lock);
-			return -EINVAL;
-		}
-		if (yrs >= 100)
-			yrs -= 100;
-
-		if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
-		    || RTC_ALWAYS_BCD) {
-			sec = bin2bcd(sec);
-			min = bin2bcd(min);
-			hrs = bin2bcd(hrs);
-			day = bin2bcd(day);
-			mon = bin2bcd(mon);
-			yrs = bin2bcd(yrs);
-		}
-
-		save_control = CMOS_READ(RTC_CONTROL);
-		CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-		save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-		CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-#ifdef CONFIG_MACH_DECSTATION
-		CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
-#endif
-		CMOS_WRITE(yrs, RTC_YEAR);
-		CMOS_WRITE(mon, RTC_MONTH);
-		CMOS_WRITE(day, RTC_DAY_OF_MONTH);
-		CMOS_WRITE(hrs, RTC_HOURS);
-		CMOS_WRITE(min, RTC_MINUTES);
-		CMOS_WRITE(sec, RTC_SECONDS);
-
-		CMOS_WRITE(save_control, RTC_CONTROL);
-		CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
-		spin_unlock_irq(&rtc_lock);
-		return 0;
-	}
-#ifdef RTC_IRQ
-	case RTC_IRQP_READ:	/* Read the periodic IRQ rate.	*/
-	{
-		return put_user(rtc_freq, (unsigned long __user *)arg);
-	}
-	case RTC_IRQP_SET:	/* Set periodic IRQ rate.	*/
-	{
-		int tmp = 0;
-		unsigned char val;
-		/* can be called from isr via rtc_control() */
-		unsigned long flags;
-
-		/*
-		 * The max we can do is 8192Hz.
-		 */
-		if ((arg < 2) || (arg > 8192))
-			return -EINVAL;
-		/*
-		 * We don't really want Joe User generating more
-		 * than 64Hz of interrupts on a multi-user machine.
-		 */
-		if (!kernel && (arg > rtc_max_user_freq) &&
-					!capable(CAP_SYS_RESOURCE))
-			return -EACCES;
-
-		while (arg > (1<<tmp))
-			tmp++;
-
-		/*
-		 * Check that the input was really a power of 2.
-		 */
-		if (arg != (1<<tmp))
-			return -EINVAL;
-
-		rtc_freq = arg;
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		if (hpet_set_periodic_freq(arg)) {
-			spin_unlock_irqrestore(&rtc_lock, flags);
-			return 0;
-		}
-
-		val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0;
-		val |= (16 - tmp);
-		CMOS_WRITE(val, RTC_FREQ_SELECT);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-		return 0;
-	}
-#endif
-	case RTC_EPOCH_READ:	/* Read the epoch.	*/
-	{
-		return put_user(epoch, (unsigned long __user *)arg);
-	}
-	case RTC_EPOCH_SET:	/* Set the epoch.	*/
-	{
-		/*
-		 * There were no RTC clocks before 1900.
-		 */
-		if (arg < 1900)
-			return -EINVAL;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		epoch = arg;
-		return 0;
-	}
-	default:
-		return -ENOTTY;
-	}
-	return copy_to_user((void __user *)arg,
-			    &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	long ret;
-	ret = rtc_do_ioctl(cmd, arg, 0);
-	return ret;
-}
-
-/*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
- */
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&rtc_lock);
-
-	if (rtc_status & RTC_IS_OPEN)
-		goto out_busy;
-
-	rtc_status |= RTC_IS_OPEN;
-
-	rtc_irq_data = 0;
-	spin_unlock_irq(&rtc_lock);
-	return 0;
-
-out_busy:
-	spin_unlock_irq(&rtc_lock);
-	return -EBUSY;
-}
-
-static int rtc_fasync(int fd, struct file *filp, int on)
-{
-	return fasync_helper(fd, filp, on, &rtc_async_queue);
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-#ifdef RTC_IRQ
-	unsigned char tmp;
-
-	if (rtc_has_irq == 0)
-		goto no_irq;
-
-	/*
-	 * Turn off all interrupts once the device is no longer
-	 * in use, and clear the data.
-	 */
-
-	spin_lock_irq(&rtc_lock);
-	if (!hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE)) {
-		tmp = CMOS_READ(RTC_CONTROL);
-		tmp &=  ~RTC_PIE;
-		tmp &=  ~RTC_AIE;
-		tmp &=  ~RTC_UIE;
-		CMOS_WRITE(tmp, RTC_CONTROL);
-		CMOS_READ(RTC_INTR_FLAGS);
-	}
-	if (rtc_status & RTC_TIMER_ON) {
-		rtc_status &= ~RTC_TIMER_ON;
-		del_timer(&rtc_irq_timer);
-	}
-	spin_unlock_irq(&rtc_lock);
-
-no_irq:
-#endif
-
-	spin_lock_irq(&rtc_lock);
-	rtc_irq_data = 0;
-	rtc_status &= ~RTC_IS_OPEN;
-	spin_unlock_irq(&rtc_lock);
-
-	return 0;
-}
-
-#ifdef RTC_IRQ
-static __poll_t rtc_poll(struct file *file, poll_table *wait)
-{
-	unsigned long l;
-
-	if (rtc_has_irq == 0)
-		return 0;
-
-	poll_wait(file, &rtc_wait, wait);
-
-	spin_lock_irq(&rtc_lock);
-	l = rtc_irq_data;
-	spin_unlock_irq(&rtc_lock);
-
-	if (l != 0)
-		return EPOLLIN | EPOLLRDNORM;
-	return 0;
-}
-#endif
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= rtc_read,
-#ifdef RTC_IRQ
-	.poll		= rtc_poll,
-#endif
-	.unlocked_ioctl	= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-	.fasync		= rtc_fasync,
-};
-
-static struct miscdevice rtc_dev = {
-	.minor		= RTC_MINOR,
-	.name		= "rtc",
-	.fops		= &rtc_fops,
-};
-
-static resource_size_t rtc_size;
-
-static struct resource * __init rtc_request_region(resource_size_t size)
-{
-	struct resource *r;
-
-	if (RTC_IOMAPPED)
-		r = request_region(RTC_PORT(0), size, "rtc");
-	else
-		r = request_mem_region(RTC_PORT(0), size, "rtc");
-
-	if (r)
-		rtc_size = size;
-
-	return r;
-}
-
-static void rtc_release_region(void)
-{
-	if (RTC_IOMAPPED)
-		release_region(RTC_PORT(0), rtc_size);
-	else
-		release_mem_region(RTC_PORT(0), rtc_size);
-}
-
-static int __init rtc_init(void)
-{
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *ent;
-#endif
-#if defined(__alpha__) || defined(__mips__)
-	unsigned int year, ctrl;
-	char *guess = NULL;
-#endif
-#ifdef CONFIG_SPARC32
-	struct device_node *ebus_dp;
-	struct platform_device *op;
-#else
-	void *r;
-#ifdef RTC_IRQ
-	irq_handler_t rtc_int_handler_ptr;
-#endif
-#endif
-
-#ifdef CONFIG_SPARC32
-	for_each_node_by_name(ebus_dp, "ebus") {
-		struct device_node *dp;
-		for_each_child_of_node(ebus_dp, dp) {
-			if (of_node_name_eq(dp, "rtc")) {
-				op = of_find_device_by_node(dp);
-				if (op) {
-					rtc_port = op->resource[0].start;
-					rtc_irq = op->irqs[0];
-					goto found;
-				}
-			}
-		}
-	}
-	rtc_has_irq = 0;
-	printk(KERN_ERR "rtc_init: no PC rtc found\n");
-	return -EIO;
-
-found:
-	if (!rtc_irq) {
-		rtc_has_irq = 0;
-		goto no_irq;
-	}
-
-	/*
-	 * XXX Interrupt pin #7 in Espresso is shared between RTC and
-	 * PCI Slot 2 INTA# (and some INTx# in Slot 1).
-	 */
-	if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc",
-			(void *)&rtc_port)) {
-		rtc_has_irq = 0;
-		printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
-		return -EIO;
-	}
-no_irq:
-#else
-	r = rtc_request_region(RTC_IO_EXTENT);
-
-	/*
-	 * If we've already requested a smaller range (for example, because
-	 * PNPBIOS or ACPI told us how the device is configured), the request
-	 * above might fail because it's too big.
-	 *
-	 * If so, request just the range we actually use.
-	 */
-	if (!r)
-		r = rtc_request_region(RTC_IO_EXTENT_USED);
-	if (!r) {
-#ifdef RTC_IRQ
-		rtc_has_irq = 0;
-#endif
-		printk(KERN_ERR "rtc: I/O resource %lx is not free.\n",
-		       (long)(RTC_PORT(0)));
-		return -EIO;
-	}
-
-#ifdef RTC_IRQ
-	if (is_hpet_enabled()) {
-		int err;
-
-		rtc_int_handler_ptr = hpet_rtc_interrupt;
-		err = hpet_register_irq_handler(rtc_interrupt);
-		if (err != 0) {
-			printk(KERN_WARNING "hpet_register_irq_handler failed "
-					"in rtc_init().");
-			return err;
-		}
-	} else {
-		rtc_int_handler_ptr = rtc_interrupt;
-	}
-
-	if (request_irq(RTC_IRQ, rtc_int_handler_ptr, 0, "rtc", NULL)) {
-		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
-		rtc_has_irq = 0;
-		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
-		rtc_release_region();
-
-		return -EIO;
-	}
-	hpet_rtc_timer_init();
-
-#endif
-
-#endif /* CONFIG_SPARC32 vs. others */
-
-	if (misc_register(&rtc_dev)) {
-#ifdef RTC_IRQ
-		free_irq(RTC_IRQ, NULL);
-		hpet_unregister_irq_handler(rtc_interrupt);
-		rtc_has_irq = 0;
-#endif
-		rtc_release_region();
-		return -ENODEV;
-	}
-
-#ifdef CONFIG_PROC_FS
-	ent = proc_create_single("driver/rtc", 0, NULL, rtc_proc_show);
-	if (!ent)
-		printk(KERN_WARNING "rtc: Failed to register with procfs.\n");
-#endif
-
-#if defined(__alpha__) || defined(__mips__)
-	rtc_freq = HZ;
-
-	/* Each operating system on an Alpha uses its own epoch.
-	   Let's try to guess which one we are using now. */
-
-	if (rtc_is_updating() != 0)
-		msleep(20);
-
-	spin_lock_irq(&rtc_lock);
-	year = CMOS_READ(RTC_YEAR);
-	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
-
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		year = bcd2bin(year);       /* This should never happen... */
-
-	if (year < 20) {
-		epoch = 2000;
-		guess = "SRM (post-2000)";
-	} else if (year >= 20 && year < 48) {
-		epoch = 1980;
-		guess = "ARC console";
-	} else if (year >= 48 && year < 72) {
-		epoch = 1952;
-		guess = "Digital UNIX";
-#if defined(__mips__)
-	} else if (year >= 72 && year < 74) {
-		epoch = 2000;
-		guess = "Digital DECstation";
-#else
-	} else if (year >= 70) {
-		epoch = 1900;
-		guess = "Standard PC (1900)";
-#endif
-	}
-	if (guess)
-		printk(KERN_INFO "rtc: %s epoch (%lu) detected\n",
-			guess, epoch);
-#endif
-#ifdef RTC_IRQ
-	if (rtc_has_irq == 0)
-		goto no_irq2;
-
-	spin_lock_irq(&rtc_lock);
-	rtc_freq = 1024;
-	if (!hpet_set_periodic_freq(rtc_freq)) {
-		/*
-		 * Initialize periodic frequency to CMOS reset default,
-		 * which is 1024Hz
-		 */
-		CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06),
-			   RTC_FREQ_SELECT);
-	}
-	spin_unlock_irq(&rtc_lock);
-no_irq2:
-#endif
-
-	(void) init_sysctl();
-
-	printk(KERN_INFO "Real Time Clock Driver v" RTC_VERSION "\n");
-
-	return 0;
-}
-
-static void __exit rtc_exit(void)
-{
-	cleanup_sysctl();
-	remove_proc_entry("driver/rtc", NULL);
-	misc_deregister(&rtc_dev);
-
-#ifdef CONFIG_SPARC32
-	if (rtc_has_irq)
-		free_irq(rtc_irq, &rtc_port);
-#else
-	rtc_release_region();
-#ifdef RTC_IRQ
-	if (rtc_has_irq) {
-		free_irq(RTC_IRQ, NULL);
-		hpet_unregister_irq_handler(hpet_rtc_interrupt);
-	}
-#endif
-#endif /* CONFIG_SPARC32 */
-}
-
-module_init(rtc_init);
-module_exit(rtc_exit);
-
-#ifdef RTC_IRQ
-/*
- *	At IRQ rates >= 4096Hz, an interrupt may get lost altogether.
- *	(usually during an IDE disk interrupt, with IRQ unmasking off)
- *	Since the interrupt handler doesn't get called, the IRQ status
- *	byte doesn't get read, and the RTC stops generating interrupts.
- *	A timer is set, and will call this function if/when that happens.
- *	To get it out of this stalled state, we just read the status.
- *	At least a jiffy of interrupts (rtc_freq/HZ) will have been lost.
- *	(You *really* shouldn't be trying to use a non-realtime system
- *	for something that requires a steady > 1KHz signal anyways.)
- */
-
-static void rtc_dropped_irq(struct timer_list *unused)
-{
-	unsigned long freq;
-
-	spin_lock_irq(&rtc_lock);
-
-	if (hpet_rtc_dropped_irq()) {
-		spin_unlock_irq(&rtc_lock);
-		return;
-	}
-
-	/* Just in case someone disabled the timer from behind our back... */
-	if (rtc_status & RTC_TIMER_ON)
-		mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
-
-	rtc_irq_data += ((rtc_freq/HZ)<<8);
-	rtc_irq_data &= ~0xff;
-	rtc_irq_data |= (CMOS_READ(RTC_INTR_FLAGS) & 0xF0);	/* restart */
-
-	freq = rtc_freq;
-
-	spin_unlock_irq(&rtc_lock);
-
-	printk_ratelimited(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
-			   freq);
-
-	/* Now we have new data */
-	wake_up_interruptible(&rtc_wait);
-
-	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-}
-#endif
-
-#ifdef CONFIG_PROC_FS
-/*
- *	Info exported via "/proc/driver/rtc".
- */
-
-static int rtc_proc_show(struct seq_file *seq, void *v)
-{
-#define YN(bit) ((ctrl & bit) ? "yes" : "no")
-#define NY(bit) ((ctrl & bit) ? "no" : "yes")
-	struct rtc_time tm;
-	unsigned char batt, ctrl;
-	unsigned long freq;
-
-	spin_lock_irq(&rtc_lock);
-	batt = CMOS_READ(RTC_VALID) & RTC_VRT;
-	ctrl = CMOS_READ(RTC_CONTROL);
-	freq = rtc_freq;
-	spin_unlock_irq(&rtc_lock);
-
-
-	rtc_get_rtc_time(&tm);
-
-	/*
-	 * There is no way to tell if the luser has the RTC set for local
-	 * time or for Universal Standard Time (GMT). Probably local though.
-	 */
-	seq_printf(seq,
-		   "rtc_time\t: %ptRt\n"
-		   "rtc_date\t: %ptRd\n"
-		   "rtc_epoch\t: %04lu\n",
-		   &tm, &tm, epoch);
-
-	get_rtc_alm_time(&tm);
-
-	/*
-	 * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will
-	 * match any value for that particular field. Values that are
-	 * greater than a valid time, but less than 0xc0 shouldn't appear.
-	 */
-	seq_puts(seq, "alarm\t\t: ");
-	if (tm.tm_hour <= 24)
-		seq_printf(seq, "%02d:", tm.tm_hour);
-	else
-		seq_puts(seq, "**:");
-
-	if (tm.tm_min <= 59)
-		seq_printf(seq, "%02d:", tm.tm_min);
-	else
-		seq_puts(seq, "**:");
-
-	if (tm.tm_sec <= 59)
-		seq_printf(seq, "%02d\n", tm.tm_sec);
-	else
-		seq_puts(seq, "**\n");
-
-	seq_printf(seq,
-		   "DST_enable\t: %s\n"
-		   "BCD\t\t: %s\n"
-		   "24hr\t\t: %s\n"
-		   "square_wave\t: %s\n"
-		   "alarm_IRQ\t: %s\n"
-		   "update_IRQ\t: %s\n"
-		   "periodic_IRQ\t: %s\n"
-		   "periodic_freq\t: %ld\n"
-		   "batt_status\t: %s\n",
-		   YN(RTC_DST_EN),
-		   NY(RTC_DM_BINARY),
-		   YN(RTC_24H),
-		   YN(RTC_SQWE),
-		   YN(RTC_AIE),
-		   YN(RTC_UIE),
-		   YN(RTC_PIE),
-		   freq,
-		   batt ? "okay" : "dead");
-
-	return  0;
-#undef YN
-#undef NY
-}
-#endif
-
-static void rtc_get_rtc_time(struct rtc_time *rtc_tm)
-{
-	unsigned long uip_watchdog = jiffies, flags;
-	unsigned char ctrl;
-#ifdef CONFIG_MACH_DECSTATION
-	unsigned int real_year;
-#endif
-
-	/*
-	 * read RTC once any update in progress is done. The update
-	 * can take just over 2ms. We wait 20ms. There is no need to
-	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
-	 * If you need to know *exactly* when a second has started, enable
-	 * periodic update complete interrupts, (via ioctl) and then
-	 * immediately read /dev/rtc which will block until you get the IRQ.
-	 * Once the read clears, read the RTC time (again via ioctl). Easy.
-	 */
-
-	while (rtc_is_updating() != 0 &&
-	       time_before(jiffies, uip_watchdog + 2*HZ/100))
-		cpu_relax();
-
-	/*
-	 * Only the values that we read from the RTC are set. We leave
-	 * tm_wday, tm_yday and tm_isdst untouched. Note that while the
-	 * RTC has RTC_DAY_OF_WEEK, we should usually ignore it, as it is
-	 * only updated by the RTC when initially set to a non-zero value.
-	 */
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
-	rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
-	rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
-	rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
-	rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
-	rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
-	/* Only set from 2.6.16 onwards */
-	rtc_tm->tm_wday = CMOS_READ(RTC_DAY_OF_WEEK);
-
-#ifdef CONFIG_MACH_DECSTATION
-	real_year = CMOS_READ(RTC_DEC_YEAR);
-#endif
-	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
-		rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
-		rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
-		rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
-		rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
-		rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-		rtc_tm->tm_wday = bcd2bin(rtc_tm->tm_wday);
-	}
-
-#ifdef CONFIG_MACH_DECSTATION
-	rtc_tm->tm_year += real_year - 72;
-#endif
-
-	/*
-	 * Account for differences between how the RTC uses the values
-	 * and how they are defined in a struct rtc_time;
-	 */
-	rtc_tm->tm_year += epoch - 1900;
-	if (rtc_tm->tm_year <= 69)
-		rtc_tm->tm_year += 100;
-
-	rtc_tm->tm_mon--;
-}
-
-static void get_rtc_alm_time(struct rtc_time *alm_tm)
-{
-	unsigned char ctrl;
-
-	/*
-	 * Only the values that we read from the RTC are set. That
-	 * means only tm_hour, tm_min, and tm_sec.
-	 */
-	spin_lock_irq(&rtc_lock);
-	alm_tm->tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
-	alm_tm->tm_min = CMOS_READ(RTC_MINUTES_ALARM);
-	alm_tm->tm_hour = CMOS_READ(RTC_HOURS_ALARM);
-	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
-
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec);
-		alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
-		alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
-	}
-}
-
-#ifdef RTC_IRQ
-/*
- * Used to disable/enable interrupts for any one of UIE, AIE, PIE.
- * Rumour has it that if you frob the interrupt enable/disable
- * bits in RTC_CONTROL, you should read RTC_INTR_FLAGS, to
- * ensure you actually start getting interrupts. Probably for
- * compatibility with older/broken chipset RTC implementations.
- * We also clear out any old irq data after an ioctl() that
- * meddles with the interrupt enable/disable bits.
- */
-
-static void mask_rtc_irq_bit_locked(unsigned char bit)
-{
-	unsigned char val;
-
-	if (hpet_mask_rtc_irq_bit(bit))
-		return;
-	val = CMOS_READ(RTC_CONTROL);
-	val &=  ~bit;
-	CMOS_WRITE(val, RTC_CONTROL);
-	CMOS_READ(RTC_INTR_FLAGS);
-
-	rtc_irq_data = 0;
-}
-
-static void set_rtc_irq_bit_locked(unsigned char bit)
-{
-	unsigned char val;
-
-	if (hpet_set_rtc_irq_bit(bit))
-		return;
-	val = CMOS_READ(RTC_CONTROL);
-	val |= bit;
-	CMOS_WRITE(val, RTC_CONTROL);
-	CMOS_READ(RTC_INTR_FLAGS);
-
-	rtc_irq_data = 0;
-}
-#endif
-
-MODULE_AUTHOR("Paul Gortmaker");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(RTC_MINOR);
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index 98f3150e0048..aff0a8e44fff 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -61,8 +61,6 @@
 #include <linux/mutex.h>
 #include <linux/toshiba.h>
 
-#define TOSH_MINOR_DEV 181
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>");
 MODULE_DESCRIPTION("Toshiba laptop SMM driver");
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 4df9b40d6342..3cbaec925606 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -112,7 +112,7 @@ struct port_buffer {
 	unsigned int sgpages;
 
 	/* sg is used if spages > 0. sg must be the last in is struct */
-	struct scatterlist sg[0];
+	struct scatterlist sg[];
 };
 
 /*