Merge tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull one more batch of power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes on top of the previously merged recent PM and
  ACPI material.

  First, one commit that broke the ACPI LPSS (Low-Power Subsystem)
  driver on a Dell box is reverted and there are two stable-candidate
  fixes for that driver.  Another fix cleans up two recently added ACPI
  EC messages that look odd and the printk level of a noisy debug
  message in the core ACPI resources handling code is reduced.

  In addition to that we have two stable-candidate fixes for the s3c
  cpufreq driver, two cpuidle powernv driver updates related to Device
  Trees and a PNP subsystem cleanup that will allow us to get rid of
  some old ugliness going forward.  Also there is a new blacklist entry
  for the ACPI backlight code.

  Specifics:

   - Revert a recent ACPI LPSS driver commit that prevented the touchpad
     driver from loading on Dell XPS13 (Jarkko Nikula).

   - Make the ACPI LPSS driver disable the I2C controllers and deassert
     SPI host controllers resets at startup on Intel BayTrail and
     Braswell SoCs in case they have been left in wrong states by the
     platform firmware which then may casuse fatal controller driver
     failures during resume from hibernation (Mika Westerberg).

   - Make two recently added ACPI EC messages look better (Scot Doyle).

   - Reduce the printk level of a recently added debug message related
     to ACPI resources that may become noisy in some cases (Rafael J
     Wysocki).

   - Add a new ACPI backlight blacklist entry for Samsung Series 9
     (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native
     backlight interface doesn't work while the ACPI based one does
     (Jens Reyer).

   - Make the PNP sybsystem's core code use __request_region() followed
     by __release_region() instead of __check_region() which then will
     allow us to get rid of the latter as it has no more users (Jakub
     Sitnicki).

   - Fix a build breakage and an issue with two __init functions that
     may be called after initialization in the s3c cpufreq driver (Arnd
     Bergmann).

   - Make the powernv cpuidle driver read target_residency values for
     idle states from a Device Tree (as we have the suitable DT bindings
     for that now) and improve the parsing of the powermgmt DT node in
     that driver (Preeti U Murthy)"

* tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: powernv: Avoid endianness conversions while parsing DT
  cpufreq: s3c: remove last use of resume_clocks callback
  cpufreq: s3c: remove incorrect __init annotations
  ACPI / LPSS: Deassert resets for SPI host controllers on Braswell
  ACPI / LPSS: Always disable I2C host controllers
  ACPI / resources: Change pr_info() to pr_debug() for debug information
  ACPI / video: Disable native backlight on Samsung Series 9 laptops
  cpuidle: powernv: Read target_residency value of idle states from DT if available
  Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C"
  ACPI / EC: Remove non-standard log emphasis
  PNP: Switch from __check_region() to __request_region()

4 files changed, 30 insertions, 6 deletions

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 02e835f3cf8a..657964e8ab7e 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -105,7 +105,7 @@ static void lpss_uart_setup(struct lpss_private_data *pdata)
 	}
 }
 
-static void byt_i2c_setup(struct lpss_private_data *pdata)
+static void lpss_deassert_reset(struct lpss_private_data *pdata)
 {
 	unsigned int offset;
 	u32 val;
@@ -114,9 +114,18 @@ static void byt_i2c_setup(struct lpss_private_data *pdata)
 	val = readl(pdata->mmio_base + offset);
 	val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
 	writel(val, pdata->mmio_base + offset);
+}
+
+#define LPSS_I2C_ENABLE			0x6c
+
+static void byt_i2c_setup(struct lpss_private_data *pdata)
+{
+	lpss_deassert_reset(pdata);
 
 	if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
 		pdata->fixed_clk_rate = 133000000;
+
+	writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
 }
 
 static struct lpss_device_desc lpt_dev_desc = {
@@ -125,7 +134,7 @@ static struct lpss_device_desc lpt_dev_desc = {
 };
 
 static struct lpss_device_desc lpt_i2c_dev_desc = {
-	.flags = LPSS_CLK | LPSS_LTR,
+	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR,
 	.prv_offset = 0x800,
 };
 
@@ -166,6 +175,12 @@ static struct lpss_device_desc byt_i2c_dev_desc = {
 	.setup = byt_i2c_setup,
 };
 
+static struct lpss_device_desc bsw_spi_dev_desc = {
+	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
+	.prv_offset = 0x400,
+	.setup = lpss_deassert_reset,
+};
+
 #else
 
 #define LPSS_ADDR(desc) (0UL)
@@ -198,7 +213,7 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = {
 	/* Braswell LPSS devices */
 	{ "80862288", LPSS_ADDR(byt_pwm_dev_desc) },
 	{ "8086228A", LPSS_ADDR(byt_uart_dev_desc) },
-	{ "8086228E", LPSS_ADDR(byt_spi_dev_desc) },
+	{ "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
 	{ "808622C1", LPSS_ADDR(byt_i2c_dev_desc) },
 
 	{ "INT3430", LPSS_ADDR(lpt_dev_desc) },
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 982b67faaaf3..a8dd2f763382 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -680,7 +680,7 @@ static void acpi_ec_start(struct acpi_ec *ec, bool resuming)
 		/* Enable GPE for event processing (SCI_EVT=1) */
 		if (!resuming)
 			acpi_ec_submit_request(ec);
-		pr_info("+++++ EC started +++++\n");
+		pr_debug("EC started\n");
 	}
 	spin_unlock_irqrestore(&ec->lock, flags);
 }
@@ -712,7 +712,7 @@ static void acpi_ec_stop(struct acpi_ec *ec, bool suspending)
 			acpi_ec_complete_request(ec);
 		clear_bit(EC_FLAGS_STARTED, &ec->flags);
 		clear_bit(EC_FLAGS_STOPPED, &ec->flags);
-		pr_info("+++++ EC stopped +++++\n");
+		pr_debug("EC stopped\n");
 	}
 	spin_unlock_irqrestore(&ec->lock, flags);
 }
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 4752b9939987..c723668e3e27 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -46,7 +46,7 @@ static bool acpi_dev_resource_len_valid(u64 start, u64 end, u64 len, bool io)
 	if (len && reslen && reslen == len && start <= end)
 		return true;
 
-	pr_info("ACPI: invalid or unassigned resource %s [%016llx - %016llx] length [%016llx]\n",
+	pr_debug("ACPI: invalid or unassigned resource %s [%016llx - %016llx] length [%016llx]\n",
 		io ? "io" : "mem", start, end, len);
 
 	return false;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 88a4f99dd2a7..debd30917010 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -540,6 +540,15 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"),
 		},
 	},
+	{
+	 /* https://bugs.freedesktop.org/show_bug.cgi?id=87286 */
+	 .callback = video_disable_native_backlight,
+	 .ident = "SAMSUNG 900X3C/900X3D/900X3E/900X4C/900X4D",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "900X3C/900X3D/900X3E/900X4C/900X4D"),
+		},
+	},
 
 	{
 	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */