MIPS: Loongson64: Give chance to build under !CONFIG_NUMA and !CONFIG_SMP

In the current code, we can not build under !CONFIG_NUMA and !CONFIG_SMP
on the Loongson64 platform, it seems bad for the users who just want to
use pure single core (not nosmp) to debug, so do the following things to
give them a chance:

(1) Do not select NUMA and SMP for MACH_LOONGSON64 in Kconfig, make NUMA
depends on SMP, and then just set them in the loongson3_defconfig.
(2) Move szmem() from numa.c to init.c and add prom_init_memory() under
!CONFIG_NUMA.
(3) Clean up szmem() due to the statements of case SYSTEM_RAM_LOW and
SYSTEM_RAM_HIGH are the same.
(4) Remove the useless declaration of prom_init_memory() and add the
declaration of szmem() in loongson.h to avoid build error.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

5 files changed, 54 insertions, 54 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0a17bedf4f0d..102236cb5e06 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -491,8 +491,6 @@ config MACH_LOONGSON64
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_SUPPORTS_RELOCATABLE
 	select ZONE_DMA32
-	select NUMA
-	select SMP
 	select COMMON_CLK
 	select USE_OF
 	select BUILTIN_DTB
@@ -2758,6 +2756,7 @@ config ARCH_SPARSEMEM_ENABLE
 config NUMA
 	bool "NUMA Support"
 	depends on SYS_SUPPORTS_NUMA
+	select SMP
 	help
 	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
 	  Access).  This option improves performance on systems with more
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 9c5fadef38cb..0e79f81217bc 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -31,6 +31,8 @@ CONFIG_PERF_EVENTS=y
 CONFIG_MACH_LOONGSON64=y
 CONFIG_CPU_HAS_MSA=y
 CONFIG_NR_CPUS=16
+CONFIG_NUMA=y
+CONFIG_SMP=y
 CONFIG_HZ_256=y
 CONFIG_KEXEC=y
 CONFIG_MIPS32_O32=y
diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index fde1b75c45ea..ac1c20e172a2 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -23,8 +23,8 @@ extern u32 memsize, highmemsize;
 extern const struct plat_smp_ops loongson3_smp_ops;
 
 /* loongson-specific command line, env and memory initialization */
-extern void __init prom_init_memory(void);
 extern void __init prom_init_env(void);
+extern void __init szmem(unsigned int node);
 extern void *loongson_fdt_blob;
 
 /* irq operation functions */
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index ed75f7971261..e13f704bef80 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -47,6 +47,51 @@ void virtual_early_config(void)
 	node_id_offset = 44;
 }
 
+void __init szmem(unsigned int node)
+{
+	u32 i, mem_type;
+	static unsigned long num_physpages;
+	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+
+	/* Parse memory information and activate */
+	for (i = 0; i < loongson_memmap->nr_map; i++) {
+		node_id = loongson_memmap->map[i].node_id;
+		if (node_id != node)
+			continue;
+
+		mem_type = loongson_memmap->map[i].mem_type;
+		mem_size = loongson_memmap->map[i].mem_size;
+		mem_start = loongson_memmap->map[i].mem_start;
+
+		switch (mem_type) {
+		case SYSTEM_RAM_LOW:
+		case SYSTEM_RAM_HIGH:
+			start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+			node_psize = (mem_size << 20) >> PAGE_SHIFT;
+			end_pfn  = start_pfn + node_psize;
+			num_physpages += node_psize;
+			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+				(u32)node_id, mem_type, mem_start, mem_size);
+			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+				start_pfn, end_pfn, num_physpages);
+			memblock_add_node(PFN_PHYS(start_pfn), PFN_PHYS(node_psize), node);
+			break;
+		case SYSTEM_RAM_RESERVED:
+			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+				(u32)node_id, mem_type, mem_start, mem_size);
+			memblock_reserve(((node_id << 44) + mem_start), mem_size << 20);
+			break;
+		}
+	}
+}
+
+#ifndef CONFIG_NUMA
+static void __init prom_init_memory(void)
+{
+	szmem(0);
+}
+#endif
+
 void __init prom_init(void)
 {
 	fw_init_cmdline();
@@ -57,7 +102,11 @@ void __init prom_init(void)
 
 	loongson_sysconf.early_config();
 
+#ifdef CONFIG_NUMA
 	prom_init_numa_memory();
+#else
+	prom_init_memory();
+#endif
 
 	/* Hardcode to CPU UART 0 */
 	setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index c6f0c48384f8..a8f57bf01285 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -25,6 +25,7 @@
 #include <asm/time.h>
 #include <asm/wbflush.h>
 #include <boot_param.h>
+#include <loongson.h>
 
 static struct pglist_data prealloc__node_data[MAX_NUMNODES];
 unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
@@ -81,57 +82,6 @@ static void __init init_topology_matrix(void)
 	}
 }
 
-static void __init szmem(unsigned int node)
-{
-	u32 i, mem_type;
-	static unsigned long num_physpages;
-	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
-
-	/* Parse memory information and activate */
-	for (i = 0; i < loongson_memmap->nr_map; i++) {
-		node_id = loongson_memmap->map[i].node_id;
-		if (node_id != node)
-			continue;
-
-		mem_type = loongson_memmap->map[i].mem_type;
-		mem_size = loongson_memmap->map[i].mem_size;
-		mem_start = loongson_memmap->map[i].mem_start;
-
-		switch (mem_type) {
-		case SYSTEM_RAM_LOW:
-			start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
-			node_psize = (mem_size << 20) >> PAGE_SHIFT;
-			end_pfn  = start_pfn + node_psize;
-			num_physpages += node_psize;
-			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
-				(u32)node_id, mem_type, mem_start, mem_size);
-			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
-				start_pfn, end_pfn, num_physpages);
-			memblock_add_node(PFN_PHYS(start_pfn),
-				PFN_PHYS(node_psize), node);
-			break;
-		case SYSTEM_RAM_HIGH:
-			start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
-			node_psize = (mem_size << 20) >> PAGE_SHIFT;
-			end_pfn  = start_pfn + node_psize;
-			num_physpages += node_psize;
-			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
-				(u32)node_id, mem_type, mem_start, mem_size);
-			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
-				start_pfn, end_pfn, num_physpages);
-			memblock_add_node(PFN_PHYS(start_pfn),
-				PFN_PHYS(node_psize), node);
-			break;
-		case SYSTEM_RAM_RESERVED:
-			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
-				(u32)node_id, mem_type, mem_start, mem_size);
-			memblock_reserve(((node_id << 44) + mem_start),
-				mem_size << 20);
-			break;
-		}
-	}
-}
-
 static void __init node_mem_init(unsigned int node)
 {
 	unsigned long node_addrspace_offset;