diff options
| author | Brian Masney <masneyb@onstation.org> | 2018-10-31 20:11:49 -0400 |
|---|---|---|
| committer | Andy Gross <andy.gross@linaro.org> | 2019-01-22 15:04:50 -0600 |
| commit | fb143fcbb9ad361004f2818e9dcb52b2556bfec1 (patch) | |
| tree | bc8cf54aa5ddc196d6067562dda85534b9a92c82 /arch | |
| parent | cdd3d64d843a2a4c658a182b744bfefbd021d542 (diff) | |
| download | linux-fb143fcbb9ad361004f2818e9dcb52b2556bfec1.tar.gz | |
ARM: dts: qcom: msm8974-hammerhead: add USB OTG support
Add the device tree bindings for USB OTG support. Driver was tested using on a LG Nexus 5 (hammerhead) phone. This patch is based on work from Jonathan Marek and from the other msm8974 devices. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 60 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974.dtsi | 11 |
2 files changed, 71 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 5cf9c7e20f2e..b3b04736a159 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -270,6 +270,16 @@ }; }; + i2c1_pins: i2c1 { + mux { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -396,6 +406,24 @@ }; }; + i2c@f9923000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -413,6 +441,31 @@ amstaos,proximity-diodes = <0>; }; }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; }; &spmi_bus { @@ -441,6 +494,13 @@ bias-disable; power-source = <PM8941_GPIO_S3>; }; + + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ca266a5f021d..05b86f21d41b 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -706,6 +706,17 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; |