Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  gpio/pch_gpio: Support new device ML7223
  gpio: make gpio_{request,free}_array gpio array parameter const
  GPIO: OMAP: move to drivers/gpio
  GPIO: OMAP: move register offset defines into <plat/gpio.h>
  gpio: Convert gpio_is_valid to return bool
  gpio: Move the s5pc100 GPIO to drivers/gpio
  gpio: Move the s5pv210 GPIO to drivers/gpio
  gpio: Move the exynos4 GPIO to drivers/gpio
  gpio: Move to Samsung common GPIO library to drivers/gpio
  gpio/nomadik: add function to read GPIO pull down status
  gpio/nomadik: show all pins in debug
  gpio: move Nomadik GPIO driver to drivers/gpio
  gpio: move U300 GPIO driver to drivers/gpio
  langwell_gpio: add runtime pm support
  gpio/pca953x: Add support for pca9574 and pca9575 devices
  gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535

19 files changed, 110 insertions, 5060 deletions

diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 683fc387c8af..a9bb94fabaa7 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -13,7 +13,7 @@ obj-				:=
 # Core support for EXYNOS4 system
 
 obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o gpiolib.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c
deleted file mode 100644
index d54ca6adb660..000000000000
--- a/arch/arm/mach-exynos4/gpiolib.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/* linux/arch/arm/mach-exynos4/gpiolib.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPA0(0),
-			.ngpio	= EXYNOS4_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPA1(0),
-			.ngpio	= EXYNOS4_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPB(0),
-			.ngpio	= EXYNOS4_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC0(0),
-			.ngpio	= EXYNOS4_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC1(0),
-			.ngpio	= EXYNOS4_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD0(0),
-			.ngpio	= EXYNOS4_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD1(0),
-			.ngpio	= EXYNOS4_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE0(0),
-			.ngpio	= EXYNOS4_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE1(0),
-			.ngpio	= EXYNOS4_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE2(0),
-			.ngpio	= EXYNOS4_GPIO_E2_NR,
-			.label	= "GPE2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE3(0),
-			.ngpio	= EXYNOS4_GPIO_E3_NR,
-			.label	= "GPE3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE4(0),
-			.ngpio	= EXYNOS4_GPIO_E4_NR,
-			.label	= "GPE4",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF0(0),
-			.ngpio	= EXYNOS4_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF1(0),
-			.ngpio	= EXYNOS4_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF2(0),
-			.ngpio	= EXYNOS4_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF3(0),
-			.ngpio	= EXYNOS4_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPJ0(0),
-			.ngpio	= EXYNOS4_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPJ1(0),
-			.ngpio	= EXYNOS4_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK0(0),
-			.ngpio	= EXYNOS4_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK1(0),
-			.ngpio	= EXYNOS4_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK2(0),
-			.ngpio	= EXYNOS4_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK3(0),
-			.ngpio	= EXYNOS4_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL0(0),
-			.ngpio	= EXYNOS4_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL1(0),
-			.ngpio	= EXYNOS4_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL2(0),
-			.ngpio	= EXYNOS4_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY0(0),
-			.ngpio	= EXYNOS4_GPIO_Y0_NR,
-			.label	= "GPY0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY1(0),
-			.ngpio	= EXYNOS4_GPIO_Y1_NR,
-			.label	= "GPY1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY2(0),
-			.ngpio	= EXYNOS4_GPIO_Y2_NR,
-			.label	= "GPY2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY3(0),
-			.ngpio	= EXYNOS4_GPIO_Y3_NR,
-			.label	= "GPY3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY4(0),
-			.ngpio	= EXYNOS4_GPIO_Y4_NR,
-			.label	= "GPY4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY5(0),
-			.ngpio	= EXYNOS4_GPIO_Y5_NR,
-			.label	= "GPY5",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY6(0),
-			.ngpio	= EXYNOS4_GPIO_Y6_NR,
-			.label	= "GPY6",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= EXYNOS4_GPX0(0),
-			.ngpio	= EXYNOS4_GPIO_X0_NR,
-			.label	= "GPX0",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= EXYNOS4_GPX1(0),
-			.ngpio	= EXYNOS4_GPIO_X1_NR,
-			.label	= "GPX1",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= EXYNOS4_GPX2(0),
-			.ngpio	= EXYNOS4_GPIO_X2_NR,
-			.label	= "GPX2",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= EXYNOS4_GPX3(0),
-			.ngpio	= EXYNOS4_GPIO_X3_NR,
-			.label	= "GPX3",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPZ(0),
-			.ngpio	= EXYNOS4_GPIO_Z_NR,
-			.label	= "GPZ",
-		},
-	},
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip;
-	int i;
-	int group = 0;
-	int nr_chips;
-
-	/* GPIO part 1 */
-
-	chip = exynos4_gpio_part1_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO1 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
-	/* GPIO part 2 */
-
-	chip = exynos4_gpio_part2_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO2 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
-	/* GPIO part 3 */
-
-	chip = exynos4_gpio_part3_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO3 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
-	s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
-	return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 71f3ea623974..3c5e0f522e9c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,7 +6,6 @@ config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
 	select NOMADIK_8815
 	select HAS_MTU
-	select NOMADIK_GPIO
 
 endmenu
 
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index eecab57d2e5d..a5e6e608b498 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,7 +11,7 @@ obj-				:=
 
 # Core support for S5PC100 system
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o
 obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
 obj-$(CONFIG_CPU_S5PC100)	+= dma.o
 
diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c
deleted file mode 100644
index 2842394b28b5..000000000000
--- a/arch/arm/mach-s5pc100/gpiolib.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/gpiolib.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- *  Copyright 2009 Samsung Electronics Co
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5PC100 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
-	.cfg_eint	= 0xf,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/*
- * GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PC100_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in S5PC100.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
-	{
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pc100_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
-	int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-	int gpioint_group = 0;
-	int i;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PC100_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pc100_gpiolib_init);
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 11f17907b4e8..50907aca006c 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5PV210 system
 
-obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 obj-$(CONFIG_S5PV210_PM)	+= pm.o sleep.o
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c
deleted file mode 100644
index 1ba20a703e05..000000000000
--- a/arch/arm/mach-s5pv210/gpiolib.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/gpiolib.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/map.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/* GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PV210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in v210.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
-	{
-		.chip	= {
-			.base	= S5PV210_GPA0(0),
-			.ngpio	= S5PV210_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPA1(0),
-			.ngpio	= S5PV210_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPB(0),
-			.ngpio	= S5PV210_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC0(0),
-			.ngpio	= S5PV210_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC1(0),
-			.ngpio	= S5PV210_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD0(0),
-			.ngpio	= S5PV210_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD1(0),
-			.ngpio	= S5PV210_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE0(0),
-			.ngpio	= S5PV210_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE1(0),
-			.ngpio	= S5PV210_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF0(0),
-			.ngpio	= S5PV210_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF1(0),
-			.ngpio	= S5PV210_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF2(0),
-			.ngpio	= S5PV210_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF3(0),
-			.ngpio	= S5PV210_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG0(0),
-			.ngpio	= S5PV210_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG1(0),
-			.ngpio	= S5PV210_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG2(0),
-			.ngpio	= S5PV210_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG3(0),
-			.ngpio	= S5PV210_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_GPI(0),
-			.ngpio	= S5PV210_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ0(0),
-			.ngpio	= S5PV210_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ1(0),
-			.ngpio	= S5PV210_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ2(0),
-			.ngpio	= S5PV210_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ3(0),
-			.ngpio	= S5PV210_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ4(0),
-			.ngpio	= S5PV210_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP01(0),
-			.ngpio	= S5PV210_GPIO_MP01_NR,
-			.label	= "MP01",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP02(0),
-			.ngpio	= S5PV210_GPIO_MP02_NR,
-			.label	= "MP02",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP03(0),
-			.ngpio	= S5PV210_GPIO_MP03_NR,
-			.label	= "MP03",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP04(0),
-			.ngpio	= S5PV210_GPIO_MP04_NR,
-			.label	= "MP04",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP05(0),
-			.ngpio	= S5PV210_GPIO_MP05_NR,
-			.label	= "MP05",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PV210_GPH0(0),
-			.ngpio	= S5PV210_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PV210_GPH1(0),
-			.ngpio	= S5PV210_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PV210_GPH2(0),
-			.ngpio	= S5PV210_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PV210_GPH3(0),
-			.ngpio	= S5PV210_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pv210_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
-	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
-	int gpioint_group = 0;
-	int i = 0;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PV210_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pv210_gpiolib_init);
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index fab46fe9a71f..8fd354aaf0a7 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o clock.o timer.o gpio.o padmux.o
+obj-y		:= core.o clock.o timer.o padmux.o
 obj-m		:=
 obj-n		:=
 obj-		:=
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
deleted file mode 100644
index d92790140fe5..000000000000
--- a/arch/arm/mach-u300/gpio.c
+++ /dev/null
@@ -1,700 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/gpio.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * U300 GPIO module.
- * This can driver either of the two basic GPIO cores
- * available in the U300 platforms:
- * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
- * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-/* Reference to GPIO block clock */
-static struct clk *clk;
-
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
-
-struct u300_gpio_port {
-	const char *name;
-	int irq;
-	int number;
-};
-
-
-static struct u300_gpio_port gpio_ports[] = {
-	{
-		.name = "gpio0",
-		.number = 0,
-	},
-	{
-		.name = "gpio1",
-		.number = 1,
-	},
-	{
-		.name = "gpio2",
-		.number = 2,
-	},
-#ifdef U300_COH901571_3
-	{
-		.name = "gpio3",
-		.number = 3,
-	},
-	{
-		.name = "gpio4",
-		.number = 4,
-	},
-#ifdef CONFIG_MACH_U300_BS335
-	{
-		.name = "gpio5",
-		.number = 5,
-	},
-	{
-		.name = "gpio6",
-		.number = 6,
-	},
-#endif
-#endif
-
-};
-
-
-#ifdef U300_COH901571_3
-
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW   0
-#define DEFAULT_OUTPUT_HIGH  1
-
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP  0
-#define ENABLE_PULL_UP  1
-
-#define GPIO_NOT_USED 0
-#define GPIO_IN       1
-#define GPIO_OUT      2
-
-struct u300_gpio_configuration_data {
-	unsigned char pin_usage;
-	unsigned char default_output_value;
-	unsigned char pull_up;
-};
-
-/* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
-	/* Port 0, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	},
-	/* Port 1, pins 0-7 */
-	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	},
-	/* Port 2, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
-	},
-	/* Port 3, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	},
-	/* Port 4, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	},
-	/* Port 5, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	},
-	/* Port 6, pind 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	}
-#endif
-
-#ifdef CONFIG_MACH_U300_BS365
-	/* Port 0, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	},
-	/* Port 1, pins 0-7 */
-	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
-	},
-	/* Port 2, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
-	},
-	/* Port 3, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
-	},
-	/* Port 4, pins 0-7 */
-	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		/* These 4 pins doesn't exist on DB3210 */
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
-	}
-#endif
-};
-#endif
-
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
-	int (*callback)(void *);
-	void *data;
-	int users;
-};
-
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
- */
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
-{
-	if (gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "registered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = func;
-	gpio_pin[gpio].data = data;
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_register_callback);
-
-int gpio_unregister_callback(unsigned gpio)
-{
-	if (!gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "unregistered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = NULL;
-	gpio_pin[gpio].data = NULL;
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_unregister_callback);
-
-/* Non-zero means valid */
-int gpio_is_valid(int number)
-{
-	if (number >= 0 &&
-	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
-		return 1;
-	return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
-
-int gpio_request(unsigned gpio, const char *label)
-{
-	if (gpio_pin[gpio].users)
-		return -EINVAL;
-	else
-		gpio_pin[gpio].users++;
-
-	gpio_users++;
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
-	gpio_users--;
-	gpio_pin[gpio].users--;
-	if (unlikely(gpio_pin[gpio].users < 0)) {
-		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
-			 gpio);
-		gpio_pin[gpio].users = 0;
-	}
-
-	return;
-}
-EXPORT_SYMBOL(gpio_free);
-
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
-	return readl(virtbase + U300_GPIO_PXPDIR +
-	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
-{
-	u32 val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value) {
-		/* set */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val | (1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		/* clear */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val & ~(1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-int gpio_direction_input(unsigned gpio)
-{
-	unsigned long flags;
-	u32 val;
-
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin*/
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
-	/* This is not needed since it sets the bits to zero.*/
-	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	local_irq_restore(flags);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned gpio, int value)
-{
-	unsigned long flags;
-	u32 val;
-
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin */
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
-	/*
-	 * FIXME: configure for push/pull, open drain or open source per pin
-	 * in setup. The current driver will only support push/pull.
-	 */
-	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
-			<< ((gpio & 0x07) << 1));
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	gpio_set_value(gpio, value);
-	local_irq_restore(flags);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
-{
-	u32 val;
-	unsigned long flags;
-	local_irq_save(flags);
-
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val |= (1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	if (edge)
-		val |= (1 << (gpio & 0x07));
-	else
-		val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
-
-void disable_irq_on_gpio_pin(unsigned gpio)
-{
-	u32 val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
-{
-	u32 val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value) {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_pullup);
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
-	struct u300_gpio_port *port = dev_id;
-	u32 val;
-	int pin;
-
-	/* Read event register */
-	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask with enable register */
-	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask relevant bits */
-	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
-	/* ACK IRQ (clear event) */
-	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Print message */
-	while (val != 0) {
-		unsigned gpio;
-
-		pin = __ffs(val);
-		/* mask off this pin */
-		val &= ~(1 << pin);
-		gpio = (port->number << 3) + pin;
-
-		if (gpio_pin[gpio].callback)
-			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
-		else
-			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
-			       gpio);
-	}
-	return IRQ_HANDLED;
-}
-
-static void gpio_set_initial_values(void)
-{
-#ifdef U300_COH901571_3
-	int i, j;
-	unsigned long flags;
-	u32 val;
-
-	/* Write default values to all pins */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
-		local_irq_restore(flags);
-	}
-
-	/*
-	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
-	 * to output and 'GPIO_IN' to input for each port. And initialize
-	 * default value on outputs.
-	 */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
-			local_irq_save(flags);
-			val = readl(virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			/* Mask out this pin */
-			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
-
-			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
-				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
-			writel(val, virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			local_irq_restore(flags);
-		}
-	}
-
-	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
-	for (i = 0; i < U300_GPIO_MAX; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
-		local_irq_restore(flags);
-	}
-#endif
-}
-
-static int __init gpio_probe(struct platform_device *pdev)
-{
-	u32 val;
-	int err = 0;
-	int i;
-	int num_irqs;
-
-	gpiodev = &pdev->dev;
-	memset(gpio_pin, 0, sizeof(gpio_pin));
-
-	/* Get GPIO clock */
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		err = PTR_ERR(clk);
-		dev_err(gpiodev, "could not get GPIO clock\n");
-		goto err_no_clk;
-	}
-	err = clk_enable(clk);
-	if (err) {
-		dev_err(gpiodev, "could not enable GPIO clock\n");
-		goto err_no_clk_enable;
-	}
-
-	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!memres)
-		goto err_no_resource;
-
-	if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
-	    == NULL) {
-		err = -ENODEV;
-		goto err_no_ioregion;
-	}
-
-	virtbase = ioremap(memres->start, resource_size(memres));
-	if (!virtbase) {
-		err = -ENOMEM;
-		goto err_no_ioremap;
-	}
-	dev_info(gpiodev, "remapped 0x%08x to %p\n",
-		 memres->start, virtbase);
-
-#ifdef U300_COH901335
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
-	/* Turn on the GPIO block */
-	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-#ifdef U300_COH901571_3
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
-	val = readl(virtbase + U300_GPIO_CR);
-	dev_info(gpiodev, "COH901571/3 block version: %d, " \
-	       "number of cores: %d\n",
-	       ((val & 0x0000FE00) >> 9),
-	       ((val & 0x000001FC) >> 2));
-	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-	gpio_set_initial_values();
-
-	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
-		gpio_ports[num_irqs].irq =
-			platform_get_irq_byname(pdev,
-						gpio_ports[num_irqs].name);
-
-		err = request_irq(gpio_ports[num_irqs].irq,
-				  gpio_irq_handler, IRQF_DISABLED,
-				  gpio_ports[num_irqs].name,
-				  &gpio_ports[num_irqs]);
-		if (err) {
-			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
-				gpio_ports[num_irqs].name);
-			goto err_no_irq;
-		}
-		/* Turns off PortX_irq_force */
-		writel(0x0, virtbase + U300_GPIO_PXIFR +
-				 num_irqs * U300_GPIO_PORTX_SPACING);
-	}
-
-	return 0;
-
- err_no_irq:
-	for (i = 0; i < num_irqs; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
- err_no_ioremap:
-	release_mem_region(memres->start, memres->end - memres->start);
- err_no_ioregion:
- err_no_resource:
-	clk_disable(clk);
- err_no_clk_enable:
-	clk_put(clk);
- err_no_clk:
-	dev_info(gpiodev, "module ERROR:%d\n", err);
-	return err;
-}
-
-static int __exit gpio_remove(struct platform_device *pdev)
-{
-	int i;
-
-	/* Turn off the GPIO block */
-	writel(0x00000000U, virtbase + U300_GPIO_CR);
-	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
-	release_mem_region(memres->start, memres->end - memres->start);
-	clk_disable(clk);
-	clk_put(clk);
-	return 0;
-}
-
-static struct platform_driver gpio_driver = {
-	.driver		= {
-		.name	= "u300-gpio",
-	},
-	.remove		= __exit_p(gpio_remove),
-};
-
-
-static int __init u300_gpio_init(void)
-{
-	return platform_driver_probe(&gpio_driver, gpio_probe);
-}
-
-static void __exit u300_gpio_exit(void)
-{
-	platform_driver_unregister(&gpio_driver);
-}
-
-arch_initcall(u300_gpio_init);
-module_exit(u300_gpio_exit);
-
-MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 54429d015954..f8b9392ee347 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,7 +5,6 @@ config UX500_SOC_COMMON
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select NOMADIK_GPIO
 	select ARM_ERRATA_753970
 
 menu "Ux500 SoC"
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 18296ee68802..ce659015535e 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -21,9 +21,4 @@ config HAS_MTU
 	  to multiple interrupt generating programmable
 	  32-bit free running decrementing counters.
 
-config NOMADIK_GPIO
-	bool
-	help
-	  Support for the Nomadik GPIO controller.
-
 endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
index c33547361bd7..37c7cdd0f8f0 100644
--- a/arch/arm/plat-nomadik/Makefile
+++ b/arch/arm/plat-nomadik/Makefile
@@ -3,4 +3,3 @@
 # Licensed under GPLv2
 
 obj-$(CONFIG_HAS_MTU)	+= timer.o
-obj-$(CONFIG_NOMADIK_GPIO)	+= gpio.o
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
deleted file mode 100644
index 307b8131aa8c..000000000000
--- a/arch/arm/plat-nomadik/gpio.c
+++ /dev/null
@@ -1,1020 +0,0 @@
-/*
- * Generic GPIO driver for logic cells found in the Nomadik SoC
- *
- * Copyright (C) 2008,2009 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-
-#include <asm/mach/irq.h>
-
-#include <plat/pincfg.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-
-/*
- * The GPIO module in the Nomadik family of Systems-on-Chip is an
- * AMBA device, managing 32 pins and alternate functions.  The logic block
- * is currently used in the Nomadik and ux500.
- *
- * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
- */
-
-#define NMK_GPIO_PER_CHIP	32
-
-struct nmk_gpio_chip {
-	struct gpio_chip chip;
-	void __iomem *addr;
-	struct clk *clk;
-	unsigned int bank;
-	unsigned int parent_irq;
-	int secondary_parent_irq;
-	u32 (*get_secondary_status)(unsigned int bank);
-	void (*set_ioforce)(bool enable);
-	spinlock_t lock;
-	/* Keep track of configured edges */
-	u32 edge_rising;
-	u32 edge_falling;
-	u32 real_wake;
-	u32 rwimsc;
-	u32 fwimsc;
-	u32 slpm;
-	u32 enabled;
-};
-
-static struct nmk_gpio_chip *
-nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)];
-
-static DEFINE_SPINLOCK(nmk_gpio_slpm_lock);
-
-#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips)
-
-static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
-				unsigned offset, int gpio_mode)
-{
-	u32 bit = 1 << offset;
-	u32 afunc, bfunc;
-
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
-	if (gpio_mode & NMK_GPIO_ALT_A)
-		afunc |= bit;
-	if (gpio_mode & NMK_GPIO_ALT_B)
-		bfunc |= bit;
-	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
-	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
-}
-
-static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
-				unsigned offset, enum nmk_gpio_slpm mode)
-{
-	u32 bit = 1 << offset;
-	u32 slpm;
-
-	slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
-	if (mode == NMK_GPIO_SLPM_NOCHANGE)
-		slpm |= bit;
-	else
-		slpm &= ~bit;
-	writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
-}
-
-static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
-				unsigned offset, enum nmk_gpio_pull pull)
-{
-	u32 bit = 1 << offset;
-	u32 pdis;
-
-	pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
-	if (pull == NMK_GPIO_PULL_NONE)
-		pdis |= bit;
-	else
-		pdis &= ~bit;
-	writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
-
-	if (pull == NMK_GPIO_PULL_UP)
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
-	else if (pull == NMK_GPIO_PULL_DOWN)
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
-}
-
-static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
-				  unsigned offset)
-{
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
-}
-
-static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
-				  unsigned offset, int val)
-{
-	if (val)
-		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
-	else
-		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
-}
-
-static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
-				  unsigned offset, int val)
-{
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
-	__nmk_gpio_set_output(nmk_chip, offset, val);
-}
-
-static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip,
-				     unsigned offset, int gpio_mode,
-				     bool glitch)
-{
-	u32 rwimsc = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
-	u32 fwimsc = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
-
-	if (glitch && nmk_chip->set_ioforce) {
-		u32 bit = BIT(offset);
-
-		/* Prevent spurious wakeups */
-		writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC);
-		writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC);
-
-		nmk_chip->set_ioforce(true);
-	}
-
-	__nmk_gpio_set_mode(nmk_chip, offset, gpio_mode);
-
-	if (glitch && nmk_chip->set_ioforce) {
-		nmk_chip->set_ioforce(false);
-
-		writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC);
-		writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC);
-	}
-}
-
-static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
-			     pin_cfg_t cfg, bool sleep, unsigned int *slpmregs)
-{
-	static const char *afnames[] = {
-		[NMK_GPIO_ALT_GPIO]	= "GPIO",
-		[NMK_GPIO_ALT_A]	= "A",
-		[NMK_GPIO_ALT_B]	= "B",
-		[NMK_GPIO_ALT_C]	= "C"
-	};
-	static const char *pullnames[] = {
-		[NMK_GPIO_PULL_NONE]	= "none",
-		[NMK_GPIO_PULL_UP]	= "up",
-		[NMK_GPIO_PULL_DOWN]	= "down",
-		[3] /* illegal */	= "??"
-	};
-	static const char *slpmnames[] = {
-		[NMK_GPIO_SLPM_INPUT]		= "input/wakeup",
-		[NMK_GPIO_SLPM_NOCHANGE]	= "no-change/no-wakeup",
-	};
-
-	int pin = PIN_NUM(cfg);
-	int pull = PIN_PULL(cfg);
-	int af = PIN_ALT(cfg);
-	int slpm = PIN_SLPM(cfg);
-	int output = PIN_DIR(cfg);
-	int val = PIN_VAL(cfg);
-	bool glitch = af == NMK_GPIO_ALT_C;
-
-	dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
-		pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
-		output ? "output " : "input",
-		output ? (val ? "high" : "low") : "");
-
-	if (sleep) {
-		int slpm_pull = PIN_SLPM_PULL(cfg);
-		int slpm_output = PIN_SLPM_DIR(cfg);
-		int slpm_val = PIN_SLPM_VAL(cfg);
-
-		af = NMK_GPIO_ALT_GPIO;
-
-		/*
-		 * The SLPM_* values are normal values + 1 to allow zero to
-		 * mean "same as normal".
-		 */
-		if (slpm_pull)
-			pull = slpm_pull - 1;
-		if (slpm_output)
-			output = slpm_output - 1;
-		if (slpm_val)
-			val = slpm_val - 1;
-
-		dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
-			pin,
-			slpm_pull ? pullnames[pull] : "same",
-			slpm_output ? (output ? "output" : "input") : "same",
-			slpm_val ? (val ? "high" : "low") : "same");
-	}
-
-	if (output)
-		__nmk_gpio_make_output(nmk_chip, offset, val);
-	else {
-		__nmk_gpio_make_input(nmk_chip, offset);
-		__nmk_gpio_set_pull(nmk_chip, offset, pull);
-	}
-
-	/*
-	 * If we've backed up the SLPM registers (glitch workaround), modify
-	 * the backups since they will be restored.
-	 */
-	if (slpmregs) {
-		if (slpm == NMK_GPIO_SLPM_NOCHANGE)
-			slpmregs[nmk_chip->bank] |= BIT(offset);
-		else
-			slpmregs[nmk_chip->bank] &= ~BIT(offset);
-	} else
-		__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
-
-	__nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch);
-}
-
-/*
- * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
- *  - Save SLPM registers
- *  - Set SLPM=0 for the IOs you want to switch and others to 1
- *  - Configure the GPIO registers for the IOs that are being switched
- *  - Set IOFORCE=1
- *  - Modify the AFLSA/B registers for the IOs that are being switched
- *  - Set IOFORCE=0
- *  - Restore SLPM registers
- *  - Any spurious wake up event during switch sequence to be ignored and
- *    cleared
- */
-static void nmk_gpio_glitch_slpm_init(unsigned int *slpm)
-{
-	int i;
-
-	for (i = 0; i < NUM_BANKS; i++) {
-		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
-		unsigned int temp = slpm[i];
-
-		if (!chip)
-			break;
-
-		slpm[i] = readl(chip->addr + NMK_GPIO_SLPC);
-		writel(temp, chip->addr + NMK_GPIO_SLPC);
-	}
-}
-
-static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm)
-{
-	int i;
-
-	for (i = 0; i < NUM_BANKS; i++) {
-		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
-
-		if (!chip)
-			break;
-
-		writel(slpm[i], chip->addr + NMK_GPIO_SLPC);
-	}
-}
-
-static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
-{
-	static unsigned int slpm[NUM_BANKS];
-	unsigned long flags;
-	bool glitch = false;
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < num; i++) {
-		if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) {
-			glitch = true;
-			break;
-		}
-	}
-
-	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
-
-	if (glitch) {
-		memset(slpm, 0xff, sizeof(slpm));
-
-		for (i = 0; i < num; i++) {
-			int pin = PIN_NUM(cfgs[i]);
-			int offset = pin % NMK_GPIO_PER_CHIP;
-
-			if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C)
-				slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset);
-		}
-
-		nmk_gpio_glitch_slpm_init(slpm);
-	}
-
-	for (i = 0; i < num; i++) {
-		struct nmk_gpio_chip *nmk_chip;
-		int pin = PIN_NUM(cfgs[i]);
-
-		nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(pin));
-		if (!nmk_chip) {
-			ret = -EINVAL;
-			break;
-		}
-
-		spin_lock(&nmk_chip->lock);
-		__nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base,
-				 cfgs[i], sleep, glitch ? slpm : NULL);
-		spin_unlock(&nmk_chip->lock);
-	}
-
-	if (glitch)
-		nmk_gpio_glitch_slpm_restore(slpm);
-
-	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
-	return ret;
-}
-
-/**
- * nmk_config_pin - configure a pin's mux attributes
- * @cfg: pin confguration
- *
- * Configures a pin's mode (alternate function or GPIO), its pull up status,
- * and its sleep mode based on the specified configuration.  The @cfg is
- * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
- * are constructed using, and can be further enhanced with, the macros in
- * plat/pincfg.h.
- *
- * If a pin's mode is set to GPIO, it is configured as an input to avoid
- * side-effects.  The gpio can be manipulated later using standard GPIO API
- * calls.
- */
-int nmk_config_pin(pin_cfg_t cfg, bool sleep)
-{
-	return __nmk_config_pins(&cfg, 1, sleep);
-}
-EXPORT_SYMBOL(nmk_config_pin);
-
-/**
- * nmk_config_pins - configure several pins at once
- * @cfgs: array of pin configurations
- * @num: number of elments in the array
- *
- * Configures several pins using nmk_config_pin().  Refer to that function for
- * further information.
- */
-int nmk_config_pins(pin_cfg_t *cfgs, int num)
-{
-	return __nmk_config_pins(cfgs, num, false);
-}
-EXPORT_SYMBOL(nmk_config_pins);
-
-int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
-{
-	return __nmk_config_pins(cfgs, num, true);
-}
-EXPORT_SYMBOL(nmk_config_pins_sleep);
-
-/**
- * nmk_gpio_set_slpm() - configure the sleep mode of a pin
- * @gpio: pin number
- * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
- *
- * Sets the sleep mode of a pin.  If @mode is NMK_GPIO_SLPM_INPUT, the pin is
- * changed to an input (with pullup/down enabled) in sleep and deep sleep.  If
- * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
- * configured even when in sleep and deep sleep.
- *
- * On DB8500v2 onwards, this setting loses the previous meaning and instead
- * indicates if wakeup detection is enabled on the pin.  Note that
- * enable_irq_wake() will automatically enable wakeup detection.
- */
-int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-
-	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
-	spin_lock(&nmk_chip->lock);
-
-	__nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode);
-
-	spin_unlock(&nmk_chip->lock);
-	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
-	return 0;
-}
-
-/**
- * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
- * @gpio: pin number
- * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
- *
- * Enables/disables pull up/down on a specified pin.  This only takes effect if
- * the pin is configured as an input (either explicitly or by the alternate
- * function).
- *
- * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
- * configured as an input.  Otherwise, due to the way the controller registers
- * work, this function will change the value output on the pin.
- */
-int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-
-	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	__nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
-	return 0;
-}
-
-/* Mode functions */
-/**
- * nmk_gpio_set_mode() - set the mux mode of a gpio pin
- * @gpio: pin number
- * @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A,
- *	       NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C
- *
- * Sets the mode of the specified pin to one of the alternate functions or
- * plain GPIO.
- */
-int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-
-	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	__nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(nmk_gpio_set_mode);
-
-int nmk_gpio_get_mode(int gpio)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	u32 afunc, bfunc, bit;
-
-	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
-
-	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
-}
-EXPORT_SYMBOL(nmk_gpio_get_mode);
-
-
-/* IRQ functions */
-static inline int nmk_gpio_get_bitmask(int gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-static void nmk_gpio_irq_ack(struct irq_data *d)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
-	nmk_chip = irq_data_get_irq_chip_data(d);
-	if (!nmk_chip)
-		return;
-	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
-}
-
-enum nmk_gpio_irq_type {
-	NORMAL,
-	WAKE,
-};
-
-static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
-				  int gpio, enum nmk_gpio_irq_type which,
-				  bool enable)
-{
-	u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC;
-	u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC;
-	u32 bitmask = nmk_gpio_get_bitmask(gpio);
-	u32 reg;
-
-	/* we must individually set/clear the two edges */
-	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + rimsc);
-		if (enable)
-			reg |= bitmask;
-		else
-			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + rimsc);
-	}
-	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + fimsc);
-		if (enable)
-			reg |= bitmask;
-		else
-			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + fimsc);
-	}
-}
-
-static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
-				int gpio, bool on)
-{
-	__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
-}
-
-static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
-	nmk_chip = irq_data_get_irq_chip_data(d);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return -EINVAL;
-
-	if (enable)
-		nmk_chip->enabled |= bitmask;
-	else
-		nmk_chip->enabled &= ~bitmask;
-
-	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
-	spin_lock(&nmk_chip->lock);
-
-	__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, enable);
-
-	if (!(nmk_chip->real_wake & bitmask))
-		__nmk_gpio_set_wake(nmk_chip, gpio, enable);
-
-	spin_unlock(&nmk_chip->lock);
-	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
-	return 0;
-}
-
-static void nmk_gpio_irq_mask(struct irq_data *d)
-{
-	nmk_gpio_irq_maskunmask(d, false);
-}
-
-static void nmk_gpio_irq_unmask(struct irq_data *d)
-{
-	nmk_gpio_irq_maskunmask(d, true);
-}
-
-static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask;
-	int gpio;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
-	nmk_chip = irq_data_get_irq_chip_data(d);
-	if (!nmk_chip)
-		return -EINVAL;
-	bitmask = nmk_gpio_get_bitmask(gpio);
-
-	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
-	spin_lock(&nmk_chip->lock);
-
-	if (!(nmk_chip->enabled & bitmask))
-		__nmk_gpio_set_wake(nmk_chip, gpio, on);
-
-	if (on)
-		nmk_chip->real_wake |= bitmask;
-	else
-		nmk_chip->real_wake &= ~bitmask;
-
-	spin_unlock(&nmk_chip->lock);
-	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
-
-	return 0;
-}
-
-static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	bool enabled, wake = irqd_is_wakeup_set(d);
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
-	nmk_chip = irq_data_get_irq_chip_data(d);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return -EINVAL;
-
-	if (type & IRQ_TYPE_LEVEL_HIGH)
-		return -EINVAL;
-	if (type & IRQ_TYPE_LEVEL_LOW)
-		return -EINVAL;
-
-	enabled = nmk_chip->enabled & bitmask;
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-
-	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
-
-	if (enabled || wake)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false);
-
-	nmk_chip->edge_rising &= ~bitmask;
-	if (type & IRQ_TYPE_EDGE_RISING)
-		nmk_chip->edge_rising |= bitmask;
-
-	nmk_chip->edge_falling &= ~bitmask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		nmk_chip->edge_falling |= bitmask;
-
-	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true);
-
-	if (enabled || wake)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
-
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
-	return 0;
-}
-
-static struct irq_chip nmk_gpio_irq_chip = {
-	.name		= "Nomadik-GPIO",
-	.irq_ack	= nmk_gpio_irq_ack,
-	.irq_mask	= nmk_gpio_irq_mask,
-	.irq_unmask	= nmk_gpio_irq_unmask,
-	.irq_set_type	= nmk_gpio_irq_set_type,
-	.irq_set_wake	= nmk_gpio_irq_set_wake,
-};
-
-static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
-				   u32 status)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	struct irq_chip *host_chip = irq_get_chip(irq);
-	unsigned int first_irq;
-
-	chained_irq_enter(host_chip, desc);
-
-	nmk_chip = irq_get_handler_data(irq);
-	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
-	while (status) {
-		int bit = __ffs(status);
-
-		generic_handle_irq(first_irq + bit);
-		status &= ~BIT(bit);
-	}
-
-	chained_irq_exit(host_chip, desc);
-}
-
-static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
-	u32 status = readl(nmk_chip->addr + NMK_GPIO_IS);
-
-	__nmk_gpio_irq_handler(irq, desc, status);
-}
-
-static void nmk_gpio_secondary_irq_handler(unsigned int irq,
-					   struct irq_desc *desc)
-{
-	struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
-	u32 status = nmk_chip->get_secondary_status(nmk_chip->bank);
-
-	__nmk_gpio_irq_handler(irq, desc, status);
-}
-
-static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
-{
-	unsigned int first_irq;
-	int i;
-
-	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
-	for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) {
-		irq_set_chip_and_handler(i, &nmk_gpio_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-		irq_set_chip_data(i, nmk_chip);
-		irq_set_irq_type(i, IRQ_TYPE_EDGE_FALLING);
-	}
-
-	irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
-	irq_set_handler_data(nmk_chip->parent_irq, nmk_chip);
-
-	if (nmk_chip->secondary_parent_irq >= 0) {
-		irq_set_chained_handler(nmk_chip->secondary_parent_irq,
-					nmk_gpio_secondary_irq_handler);
-		irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip);
-	}
-
-	return 0;
-}
-
-/* I/O Functions */
-static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
-	return 0;
-}
-
-static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
-
-	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
-}
-
-static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	__nmk_gpio_set_output(nmk_chip, offset, val);
-}
-
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	__nmk_gpio_make_output(nmk_chip, offset, val);
-
-	return 0;
-}
-
-static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/seq_file.h>
-
-static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
-	int mode;
-	unsigned		i;
-	unsigned		gpio = chip->base;
-	int			is_out;
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-	const char *modes[] = {
-		[NMK_GPIO_ALT_GPIO]	= "gpio",
-		[NMK_GPIO_ALT_A]	= "altA",
-		[NMK_GPIO_ALT_B]	= "altB",
-		[NMK_GPIO_ALT_C]	= "altC",
-	};
-
-	for (i = 0; i < chip->ngpio; i++, gpio++) {
-		const char *label = gpiochip_is_requested(chip, i);
-		bool pull;
-		u32 bit = 1 << i;
-
-		if (!label)
-			continue;
-
-		is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit;
-		pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit);
-		mode = nmk_gpio_get_mode(gpio);
-		seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s",
-			gpio, label,
-			is_out ? "out" : "in ",
-			chip->get
-				? (chip->get(chip, i) ? "hi" : "lo")
-				: "?  ",
-			(mode < 0) ? "unknown" : modes[mode],
-			pull ? "pull" : "none");
-		seq_printf(s, "\n");
-	}
-}
-
-#else
-#define nmk_gpio_dbg_show	NULL
-#endif
-
-/* This structure is replicated for each GPIO block allocated at probe time */
-static struct gpio_chip nmk_gpio_template = {
-	.direction_input	= nmk_gpio_make_input,
-	.get			= nmk_gpio_get_input,
-	.direction_output	= nmk_gpio_make_output,
-	.set			= nmk_gpio_set_output,
-	.to_irq			= nmk_gpio_to_irq,
-	.dbg_show		= nmk_gpio_dbg_show,
-	.can_sleep		= 0,
-};
-
-/*
- * Called from the suspend/resume path to only keep the real wakeup interrupts
- * (those that have had set_irq_wake() called on them) as wakeup interrupts,
- * and not the rest of the interrupts which we needed to have as wakeups for
- * cpuidle.
- *
- * PM ops are not used since this needs to be done at the end, after all the
- * other drivers are done with their suspend callbacks.
- */
-void nmk_gpio_wakeups_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < NUM_BANKS; i++) {
-		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
-
-		if (!chip)
-			break;
-
-		chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC);
-		chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC);
-
-		writel(chip->rwimsc & chip->real_wake,
-		       chip->addr + NMK_GPIO_RWIMSC);
-		writel(chip->fwimsc & chip->real_wake,
-		       chip->addr + NMK_GPIO_FWIMSC);
-
-		if (cpu_is_u8500v2()) {
-			chip->slpm = readl(chip->addr + NMK_GPIO_SLPC);
-
-			/* 0 -> wakeup enable */
-			writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC);
-		}
-	}
-}
-
-void nmk_gpio_wakeups_resume(void)
-{
-	int i;
-
-	for (i = 0; i < NUM_BANKS; i++) {
-		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
-
-		if (!chip)
-			break;
-
-		writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
-		writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
-
-		if (cpu_is_u8500v2())
-			writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
-	}
-}
-
-static int __devinit nmk_gpio_probe(struct platform_device *dev)
-{
-	struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
-	struct nmk_gpio_chip *nmk_chip;
-	struct gpio_chip *chip;
-	struct resource *res;
-	struct clk *clk;
-	int secondary_irq;
-	int irq;
-	int ret;
-
-	if (!pdata)
-		return -ENODEV;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENOENT;
-		goto out;
-	}
-
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto out;
-	}
-
-	secondary_irq = platform_get_irq(dev, 1);
-	if (secondary_irq >= 0 && !pdata->get_secondary_status) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (request_mem_region(res->start, resource_size(res),
-			       dev_name(&dev->dev)) == NULL) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	clk = clk_get(&dev->dev, NULL);
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		goto out_release;
-	}
-
-	clk_enable(clk);
-
-	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
-	if (!nmk_chip) {
-		ret = -ENOMEM;
-		goto out_clk;
-	}
-	/*
-	 * The virt address in nmk_chip->addr is in the nomadik register space,
-	 * so we can simply convert the resource address, without remapping
-	 */
-	nmk_chip->bank = dev->id;
-	nmk_chip->clk = clk;
-	nmk_chip->addr = io_p2v(res->start);
-	nmk_chip->chip = nmk_gpio_template;
-	nmk_chip->parent_irq = irq;
-	nmk_chip->secondary_parent_irq = secondary_irq;
-	nmk_chip->get_secondary_status = pdata->get_secondary_status;
-	nmk_chip->set_ioforce = pdata->set_ioforce;
-	spin_lock_init(&nmk_chip->lock);
-
-	chip = &nmk_chip->chip;
-	chip->base = pdata->first_gpio;
-	chip->ngpio = pdata->num_gpio;
-	chip->label = pdata->name ?: dev_name(&dev->dev);
-	chip->dev = &dev->dev;
-	chip->owner = THIS_MODULE;
-
-	ret = gpiochip_add(&nmk_chip->chip);
-	if (ret)
-		goto out_free;
-
-	BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
-
-	nmk_gpio_chips[nmk_chip->bank] = nmk_chip;
-	platform_set_drvdata(dev, nmk_chip);
-
-	nmk_gpio_init_irq(nmk_chip);
-
-	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
-		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
-	return 0;
-
-out_free:
-	kfree(nmk_chip);
-out_clk:
-	clk_disable(clk);
-	clk_put(clk);
-out_release:
-	release_mem_region(res->start, resource_size(res));
-out:
-	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
-		  pdata->first_gpio, pdata->first_gpio+31);
-	return ret;
-}
-
-static struct platform_driver nmk_gpio_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "gpio",
-	},
-	.probe = nmk_gpio_probe,
-};
-
-static int __init nmk_gpio_init(void)
-{
-	return platform_driver_register(&nmk_gpio_driver);
-}
-
-core_initcall(nmk_gpio_init);
-
-MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
-MODULE_DESCRIPTION("Nomadik GPIO Driver");
-MODULE_LICENSE("GPL");
-
-
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index 1b9f6f0843d1..ea19a5b2f227 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -78,6 +78,8 @@ extern int nmk_gpio_get_mode(int gpio);
 extern void nmk_gpio_wakeups_suspend(void);
 extern void nmk_gpio_wakeups_resume(void);
 
+extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
+
 /*
  * Platform data to register a block: only the initial gpio/irq number.
  */
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index a4a12859fdd5..f0233e6abcdf 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
+obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
 	 usb.o fb.o io.o counter_32k.o
 obj-m :=
 obj-n :=
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
deleted file mode 100644
index efb869390199..000000000000
--- a/arch/arm/plat-omap/gpio.c
+++ /dev/null
@@ -1,2112 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/gpio.c
- *
- * Support functions for OMAP GPIO
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/syscore_ops.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <mach/gpio.h>
-#include <asm/mach/irq.h>
-
-/*
- * OMAP1510 GPIO registers
- */
-#define OMAP1510_GPIO_DATA_INPUT	0x00
-#define OMAP1510_GPIO_DATA_OUTPUT	0x04
-#define OMAP1510_GPIO_DIR_CONTROL	0x08
-#define OMAP1510_GPIO_INT_CONTROL	0x0c
-#define OMAP1510_GPIO_INT_MASK		0x10
-#define OMAP1510_GPIO_INT_STATUS	0x14
-#define OMAP1510_GPIO_PIN_CONTROL	0x18
-
-#define OMAP1510_IH_GPIO_BASE		64
-
-/*
- * OMAP1610 specific GPIO registers
- */
-#define OMAP1610_GPIO_REVISION		0x0000
-#define OMAP1610_GPIO_SYSCONFIG		0x0010
-#define OMAP1610_GPIO_SYSSTATUS		0x0014
-#define OMAP1610_GPIO_IRQSTATUS1	0x0018
-#define OMAP1610_GPIO_IRQENABLE1	0x001c
-#define OMAP1610_GPIO_WAKEUPENABLE	0x0028
-#define OMAP1610_GPIO_DATAIN		0x002c
-#define OMAP1610_GPIO_DATAOUT		0x0030
-#define OMAP1610_GPIO_DIRECTION		0x0034
-#define OMAP1610_GPIO_EDGE_CTRL1	0x0038
-#define OMAP1610_GPIO_EDGE_CTRL2	0x003c
-#define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c
-#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8
-#define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0
-#define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc
-#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8
-#define OMAP1610_GPIO_SET_DATAOUT	0x00f0
-
-/*
- * OMAP7XX specific GPIO registers
- */
-#define OMAP7XX_GPIO_DATA_INPUT		0x00
-#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
-#define OMAP7XX_GPIO_DIR_CONTROL	0x08
-#define OMAP7XX_GPIO_INT_CONTROL	0x0c
-#define OMAP7XX_GPIO_INT_MASK		0x10
-#define OMAP7XX_GPIO_INT_STATUS		0x14
-
-/*
- * omap2+ specific GPIO registers
- */
-#define OMAP24XX_GPIO_REVISION		0x0000
-#define OMAP24XX_GPIO_IRQSTATUS1	0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2	0x0028
-#define OMAP24XX_GPIO_IRQENABLE2	0x002c
-#define OMAP24XX_GPIO_IRQENABLE1	0x001c
-#define OMAP24XX_GPIO_WAKE_EN		0x0020
-#define OMAP24XX_GPIO_CTRL		0x0030
-#define OMAP24XX_GPIO_OE		0x0034
-#define OMAP24XX_GPIO_DATAIN		0x0038
-#define OMAP24XX_GPIO_DATAOUT		0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0	0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1	0x0044
-#define OMAP24XX_GPIO_RISINGDETECT	0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT	0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN	0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL	0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA	0x0080
-#define OMAP24XX_GPIO_SETWKUENA		0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
-#define OMAP24XX_GPIO_SETDATAOUT	0x0094
-
-#define OMAP4_GPIO_REVISION		0x0000
-#define OMAP4_GPIO_EOI			0x0020
-#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
-#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
-#define OMAP4_GPIO_IRQSTATUS0		0x002c
-#define OMAP4_GPIO_IRQSTATUS1		0x0030
-#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
-#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
-#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
-#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
-#define OMAP4_GPIO_IRQWAKEN0		0x0044
-#define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_IRQENABLE1		0x011c
-#define OMAP4_GPIO_WAKE_EN		0x0120
-#define OMAP4_GPIO_IRQSTATUS2		0x0128
-#define OMAP4_GPIO_IRQENABLE2		0x012c
-#define OMAP4_GPIO_CTRL			0x0130
-#define OMAP4_GPIO_OE			0x0134
-#define OMAP4_GPIO_DATAIN		0x0138
-#define OMAP4_GPIO_DATAOUT		0x013c
-#define OMAP4_GPIO_LEVELDETECT0		0x0140
-#define OMAP4_GPIO_LEVELDETECT1		0x0144
-#define OMAP4_GPIO_RISINGDETECT		0x0148
-#define OMAP4_GPIO_FALLINGDETECT	0x014c
-#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
-#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
-#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
-#define OMAP4_GPIO_SETIRQENABLE1	0x0164
-#define OMAP4_GPIO_CLEARWKUENA		0x0180
-#define OMAP4_GPIO_SETWKUENA		0x0184
-#define OMAP4_GPIO_CLEARDATAOUT		0x0190
-#define OMAP4_GPIO_SETDATAOUT		0x0194
-
-struct gpio_bank {
-	unsigned long pbase;
-	void __iomem *base;
-	u16 irq;
-	u16 virtual_irq_start;
-	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-	u32 suspend_wakeup;
-	u32 saved_wakeup;
-#endif
-	u32 non_wakeup_gpios;
-	u32 enabled_non_wakeup_gpios;
-
-	u32 saved_datain;
-	u32 saved_fallingdetect;
-	u32 saved_risingdetect;
-	u32 level_mask;
-	u32 toggle_mask;
-	spinlock_t lock;
-	struct gpio_chip chip;
-	struct clk *dbck;
-	u32 mod_usage;
-	u32 dbck_enable_mask;
-	struct device *dev;
-	bool dbck_flag;
-	int stride;
-};
-
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
-	u32 irqenable1;
-	u32 irqenable2;
-	u32 wake_en;
-	u32 ctrl;
-	u32 oe;
-	u32 leveldetect0;
-	u32 leveldetect1;
-	u32 risingdetect;
-	u32 fallingdetect;
-	u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
-/*
- * TODO: Cleanup gpio_bank usage as it is having information
- * related to all instances of the device
- */
-static struct gpio_bank *gpio_bank;
-
-static int bank_width;
-
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-int gpio_bank_count;
-
-static inline struct gpio_bank *get_gpio_bank(int gpio)
-{
-	if (cpu_is_omap15xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1];
-	}
-	if (cpu_is_omap16xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1 + (gpio >> 4)];
-	}
-	if (cpu_is_omap7xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1 + (gpio >> 5)];
-	}
-	if (cpu_is_omap24xx())
-		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx() || cpu_is_omap44xx())
-		return &gpio_bank[gpio >> 5];
-	BUG();
-	return NULL;
-}
-
-static inline int get_gpio_index(int gpio)
-{
-	if (cpu_is_omap7xx())
-		return gpio & 0x1f;
-	if (cpu_is_omap24xx())
-		return gpio & 0x1f;
-	if (cpu_is_omap34xx() || cpu_is_omap44xx())
-		return gpio & 0x1f;
-	return gpio & 0x0f;
-}
-
-static inline int gpio_valid(int gpio)
-{
-	if (gpio < 0)
-		return -1;
-	if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
-		if (gpio >= OMAP_MAX_GPIO_LINES + 16)
-			return -1;
-		return 0;
-	}
-	if (cpu_is_omap15xx() && gpio < 16)
-		return 0;
-	if ((cpu_is_omap16xx()) && gpio < 64)
-		return 0;
-	if (cpu_is_omap7xx() && gpio < 192)
-		return 0;
-	if (cpu_is_omap2420() && gpio < 128)
-		return 0;
-	if (cpu_is_omap2430() && gpio < 160)
-		return 0;
-	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
-		return 0;
-	return -1;
-}
-
-static int check_gpio(int gpio)
-{
-	if (unlikely(gpio_valid(gpio) < 0)) {
-		printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
-		dump_stack();
-		return -1;
-	}
-	return 0;
-}
-
-static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
-{
-	void __iomem *reg = bank->base;
-	u32 l;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DIR_CONTROL;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_OE;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	l = __raw_readl(reg);
-	if (is_input)
-		l |= 1 << gpio;
-	else
-		l &= ~(1 << gpio);
-	__raw_writel(l, reg);
-}
-
-static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
-{
-	void __iomem *reg = bank->base;
-	u32 l = 0;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT / bank->stride;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (enable)
-			reg += OMAP1610_GPIO_SET_DATAOUT;
-		else
-			reg += OMAP1610_GPIO_CLEAR_DATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		if (enable)
-			reg += OMAP24XX_GPIO_SETDATAOUT;
-		else
-			reg += OMAP24XX_GPIO_CLEARDATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		if (enable)
-			reg += OMAP4_GPIO_SETDATAOUT;
-		else
-			reg += OMAP4_GPIO_CLEARDATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	__raw_writel(l, reg);
-}
-
-static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
-{
-	void __iomem *reg;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-	reg = bank->base;
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_INPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DATAIN;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_INPUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_DATAIN;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_DATAIN;
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
-	return (__raw_readl(reg)
-			& (1 << get_gpio_index(gpio))) != 0;
-}
-
-static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
-{
-	void __iomem *reg;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-	reg = bank->base;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DATAOUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_DATAOUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_DATAOUT;
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
-
-	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
-}
-
-#define MOD_REG_BIT(reg, bit_mask, set)	\
-do {	\
-	int l = __raw_readl(base + reg); \
-	if (set) l |= bit_mask; \
-	else l &= ~bit_mask; \
-	__raw_writel(l, base + reg); \
-} while(0)
-
-/**
- * _set_gpio_debounce - low level gpio debounce time
- * @bank: the gpio bank we're acting upon
- * @gpio: the gpio number on this @gpio
- * @debounce: debounce time to use
- *
- * OMAP's debounce time is in 31us steps so we need
- * to convert and round up to the closest unit.
- */
-static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
-		unsigned debounce)
-{
-	void __iomem		*reg = bank->base;
-	u32			val;
-	u32			l;
-
-	if (!bank->dbck_flag)
-		return;
-
-	if (debounce < 32)
-		debounce = 0x01;
-	else if (debounce > 7936)
-		debounce = 0xff;
-	else
-		debounce = (debounce / 0x1f) - 1;
-
-	l = 1 << get_gpio_index(gpio);
-
-	if (bank->method == METHOD_GPIO_44XX)
-		reg += OMAP4_GPIO_DEBOUNCINGTIME;
-	else
-		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-
-	__raw_writel(debounce, reg);
-
-	reg = bank->base;
-	if (bank->method == METHOD_GPIO_44XX)
-		reg += OMAP4_GPIO_DEBOUNCENABLE;
-	else
-		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-
-	val = __raw_readl(reg);
-
-	if (debounce) {
-		val |= l;
-		clk_enable(bank->dbck);
-	} else {
-		val &= ~l;
-		clk_disable(bank->dbck);
-	}
-	bank->dbck_enable_mask = val;
-
-	__raw_writel(val, reg);
-}
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
-						int trigger)
-{
-	void __iomem *base = bank->base;
-	u32 gpio_bit = 1 << gpio;
-	u32 val;
-
-	if (cpu_is_omap44xx()) {
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
-	} else {
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
-	}
-	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-		if (cpu_is_omap44xx()) {
-			if (trigger != 0)
-				__raw_writel(1 << gpio, bank->base+
-						OMAP4_GPIO_IRQWAKEN0);
-			else {
-				val = __raw_readl(bank->base +
-							OMAP4_GPIO_IRQWAKEN0);
-				__raw_writel(val & (~(1 << gpio)), bank->base +
-							 OMAP4_GPIO_IRQWAKEN0);
-			}
-		} else {
-			/*
-			 * GPIO wakeup request can only be generated on edge
-			 * transitions
-			 */
-			if (trigger & IRQ_TYPE_EDGE_BOTH)
-				__raw_writel(1 << gpio, bank->base
-					+ OMAP24XX_GPIO_SETWKUENA);
-			else
-				__raw_writel(1 << gpio, bank->base
-					+ OMAP24XX_GPIO_CLEARWKUENA);
-		}
-	}
-	/* This part needs to be executed always for OMAP34xx */
-	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
-		/*
-		 * Log the edge gpio and manually trigger the IRQ
-		 * after resume if the input level changes
-		 * to avoid irq lost during PER RET/OFF mode
-		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
-		 */
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
-			bank->enabled_non_wakeup_gpios |= gpio_bit;
-		else
-			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
-	}
-
-	if (cpu_is_omap44xx()) {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
-	} else {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-	}
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-/*
- * This only applies to chips that can't do both rising and falling edge
- * detection at once.  For all other chips, this function is a noop.
- */
-static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
-{
-	void __iomem *reg = bank->base;
-	u32 l = 0;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
-		break;
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_CONTROL;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_CONTROL;
-		break;
-#endif
-	default:
-		return;
-	}
-
-	l = __raw_readl(reg);
-	if ((l >> gpio) & 1)
-		l &= ~(1 << gpio);
-	else
-		l |= 1 << gpio;
-
-	__raw_writel(l, reg);
-}
-#endif
-
-static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
-{
-	void __iomem *reg = bank->base;
-	u32 l = 0;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (gpio & 0x08)
-			reg += OMAP1610_GPIO_EDGE_CTRL2;
-		else
-			reg += OMAP1610_GPIO_EDGE_CTRL1;
-		gpio &= 0x07;
-		l = __raw_readl(reg);
-		l &= ~(3 << (gpio << 1));
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 2 << (gpio << 1);
-		if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l |= 1 << (gpio << 1);
-		if (trigger)
-			/* Enable wake-up during idle for dynamic tick */
-			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
-		else
-			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
-		set_24xx_gpio_triggering(bank, gpio, trigger);
-		return 0;
-#endif
-	default:
-		goto bad;
-	}
-	__raw_writel(l, reg);
-	return 0;
-bad:
-	return -EINVAL;
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned type)
-{
-	struct gpio_bank *bank;
-	unsigned gpio;
-	int retval;
-	unsigned long flags;
-
-	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
-		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	else
-		gpio = d->irq - IH_GPIO_BASE;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
-	if (type & ~IRQ_TYPE_SENSE_MASK)
-		return -EINVAL;
-
-	/* OMAP1 allows only only edge triggering */
-	if (!cpu_class_is_omap2()
-			&& (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
-		return -EINVAL;
-
-	bank = irq_data_get_irq_chip_data(d);
-	spin_lock_irqsave(&bank->lock, flags);
-	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-
-	return retval;
-}
-
-static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
-{
-	void __iomem *reg = bank->base;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		/* MPUIO irqstatus is reset by reading the status register,
-		 * so do nothing here */
-		return;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_STATUS;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_IRQSTATUS1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_STATUS;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_IRQSTATUS1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_IRQSTATUS0;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	__raw_writel(gpio_mask, reg);
-
-	/* Workaround for clearing DSP GPIO interrupts to allow retention */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-	else if (cpu_is_omap44xx())
-		reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		__raw_writel(gpio_mask, reg);
-
-	/* Flush posted write for the irq status to avoid spurious interrupts */
-	__raw_readl(reg);
-	}
-}
-
-static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
-{
-	_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
-}
-
-static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
-{
-	void __iomem *reg = bank->base;
-	int inv = 0;
-	u32 l;
-	u32 mask;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-		mask = 0xffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_MASK;
-		mask = 0xffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_IRQENABLE1;
-		mask = 0xffff;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_MASK;
-		mask = 0xffffffff;
-		inv = 1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_IRQENABLE1;
-		mask = 0xffffffff;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_IRQSTATUSSET0;
-		mask = 0xffffffff;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return 0;
-	}
-
-	l = __raw_readl(reg);
-	if (inv)
-		l = ~l;
-	l &= mask;
-	return l;
-}
-
-static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
-{
-	void __iomem *reg = bank->base;
-	u32 l;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (enable)
-			reg += OMAP1610_GPIO_SET_IRQENABLE1;
-		else
-			reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
-		l = gpio_mask;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		if (enable)
-			reg += OMAP24XX_GPIO_SETIRQENABLE1;
-		else
-			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
-		l = gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		if (enable)
-			reg += OMAP4_GPIO_IRQSTATUSSET0;
-		else
-			reg += OMAP4_GPIO_IRQSTATUSCLR0;
-		l = gpio_mask;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	__raw_writel(l, reg);
-}
-
-static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
-{
-	_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
-}
-
-/*
- * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
- * 1510 does not seem to have a wake-up register. If JTAG is connected
- * to the target, system will wake up always on GPIO events. While
- * system is running all registered GPIO interrupts need to have wake-up
- * enabled. When system is suspended, only selected GPIO interrupts need
- * to have wake-up enabled.
- */
-static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
-{
-	unsigned long uninitialized_var(flags);
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_MPUIO:
-	case METHOD_GPIO_1610:
-		spin_lock_irqsave(&bank->lock, flags);
-		if (enable)
-			bank->suspend_wakeup |= (1 << gpio);
-		else
-			bank->suspend_wakeup &= ~(1 << gpio);
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
-		if (bank->non_wakeup_gpios & (1 << gpio)) {
-			printk(KERN_ERR "Unable to modify wakeup on "
-					"non-wakeup GPIO%d\n",
-					(bank - gpio_bank) * 32 + gpio);
-			return -EINVAL;
-		}
-		spin_lock_irqsave(&bank->lock, flags);
-		if (enable)
-			bank->suspend_wakeup |= (1 << gpio);
-		else
-			bank->suspend_wakeup &= ~(1 << gpio);
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return 0;
-#endif
-	default:
-		printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
-		       bank->method);
-		return -EINVAL;
-	}
-}
-
-static void _reset_gpio(struct gpio_bank *bank, int gpio)
-{
-	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
-	_set_gpio_irqenable(bank, gpio, 0);
-	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
-}
-
-/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
-static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
-{
-	unsigned int gpio = d->irq - IH_GPIO_BASE;
-	struct gpio_bank *bank;
-	int retval;
-
-	if (check_gpio(gpio) < 0)
-		return -ENODEV;
-	bank = irq_data_get_irq_chip_data(d);
-	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
-
-	return retval;
-}
-
-static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
-	unsigned long flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	/* Set trigger to none. You need to enable the desired trigger with
-	 * request_irq() or set_irq_type().
-	 */
-	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (bank->method == METHOD_GPIO_1510) {
-		void __iomem *reg;
-
-		/* Claim the pin for MPU */
-		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
-		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
-	}
-#endif
-	if (!cpu_class_is_omap1()) {
-		if (!bank->mod_usage) {
-			void __iomem *reg = bank->base;
-			u32 ctrl;
-
-			if (cpu_is_omap24xx() || cpu_is_omap34xx())
-				reg += OMAP24XX_GPIO_CTRL;
-			else if (cpu_is_omap44xx())
-				reg += OMAP4_GPIO_CTRL;
-			ctrl = __raw_readl(reg);
-			/* Module is enabled, clocks are not gated */
-			ctrl &= 0xFFFFFFFE;
-			__raw_writel(ctrl, reg);
-		}
-		bank->mod_usage |= 1 << offset;
-	}
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-
-static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
-	unsigned long flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (bank->method == METHOD_GPIO_1610) {
-		/* Disable wake-up during idle for dynamic tick */
-		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-		__raw_writel(1 << offset, reg);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	if (bank->method == METHOD_GPIO_24XX) {
-		/* Disable wake-up during idle for dynamic tick */
-		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-		__raw_writel(1 << offset, reg);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	if (bank->method == METHOD_GPIO_44XX) {
-		/* Disable wake-up during idle for dynamic tick */
-		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
-		__raw_writel(1 << offset, reg);
-	}
-#endif
-	if (!cpu_class_is_omap1()) {
-		bank->mod_usage &= ~(1 << offset);
-		if (!bank->mod_usage) {
-			void __iomem *reg = bank->base;
-			u32 ctrl;
-
-			if (cpu_is_omap24xx() || cpu_is_omap34xx())
-				reg += OMAP24XX_GPIO_CTRL;
-			else if (cpu_is_omap44xx())
-				reg += OMAP4_GPIO_CTRL;
-			ctrl = __raw_readl(reg);
-			/* Module is disabled, clocks are gated */
-			ctrl |= 1;
-			__raw_writel(ctrl, reg);
-		}
-	}
-	_reset_gpio(bank, bank->chip.base + offset);
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-/*
- * We need to unmask the GPIO bank interrupt as soon as possible to
- * avoid missing GPIO interrupts for other lines in the bank.
- * Then we need to mask-read-clear-unmask the triggered GPIO lines
- * in the bank to avoid missing nested interrupts for a GPIO line.
- * If we wait to unmask individual GPIO lines in the bank after the
- * line's interrupt handler has been run, we may miss some nested
- * interrupts.
- */
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *isr_reg = NULL;
-	u32 isr;
-	unsigned int gpio_irq, gpio_index;
-	struct gpio_bank *bank;
-	u32 retrigger = 0;
-	int unmasked = 0;
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-
-	chained_irq_enter(chip, desc);
-
-	bank = irq_get_handler_data(irq);
-#ifdef CONFIG_ARCH_OMAP1
-	if (bank->method == METHOD_MPUIO)
-		isr_reg = bank->base +
-				OMAP_MPUIO_GPIO_INT / bank->stride;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (bank->method == METHOD_GPIO_1510)
-		isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (bank->method == METHOD_GPIO_1610)
-		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (bank->method == METHOD_GPIO_7XX)
-		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	if (bank->method == METHOD_GPIO_24XX)
-		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	if (bank->method == METHOD_GPIO_44XX)
-		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
-#endif
-
-	if (WARN_ON(!isr_reg))
-		goto exit;
-
-	while(1) {
-		u32 isr_saved, level_mask = 0;
-		u32 enabled;
-
-		enabled = _get_gpio_irqbank_mask(bank);
-		isr_saved = isr = __raw_readl(isr_reg) & enabled;
-
-		if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
-			isr &= 0x0000ffff;
-
-		if (cpu_class_is_omap2()) {
-			level_mask = bank->level_mask & enabled;
-		}
-
-		/* clear edge sensitive interrupts before handler(s) are
-		called so that we don't miss any interrupt occurred while
-		executing them */
-		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
-		_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
-		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
-
-		/* if there is only edge sensitive GPIO pin interrupts
-		configured, we could unmask GPIO bank interrupt immediately */
-		if (!level_mask && !unmasked) {
-			unmasked = 1;
-			chained_irq_exit(chip, desc);
-		}
-
-		isr |= retrigger;
-		retrigger = 0;
-		if (!isr)
-			break;
-
-		gpio_irq = bank->virtual_irq_start;
-		for (; isr != 0; isr >>= 1, gpio_irq++) {
-			gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
-
-			if (!(isr & 1))
-				continue;
-
-#ifdef CONFIG_ARCH_OMAP1
-			/*
-			 * Some chips can't respond to both rising and falling
-			 * at the same time.  If this irq was requested with
-			 * both flags, we need to flip the ICR data for the IRQ
-			 * to respond to the IRQ for the opposite direction.
-			 * This will be indicated in the bank toggle_mask.
-			 */
-			if (bank->toggle_mask & (1 << gpio_index))
-				_toggle_gpio_edge_triggering(bank, gpio_index);
-#endif
-
-			generic_handle_irq(gpio_irq);
-		}
-	}
-	/* if bank has any level sensitive GPIO pin interrupt
-	configured, we must unmask the bank interrupt only after
-	handler(s) are executed in order to avoid spurious bank
-	interrupt */
-exit:
-	if (!unmasked)
-		chained_irq_exit(chip, desc);
-}
-
-static void gpio_irq_shutdown(struct irq_data *d)
-{
-	unsigned int gpio = d->irq - IH_GPIO_BASE;
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	_reset_gpio(bank, gpio);
-}
-
-static void gpio_ack_irq(struct irq_data *d)
-{
-	unsigned int gpio = d->irq - IH_GPIO_BASE;
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	_clear_gpio_irqstatus(bank, gpio);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
-	unsigned int gpio = d->irq - IH_GPIO_BASE;
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	_set_gpio_irqenable(bank, gpio, 0);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
-	unsigned int gpio = d->irq - IH_GPIO_BASE;
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int irq_mask = 1 << get_gpio_index(gpio);
-	u32 trigger = irqd_get_trigger_type(d);
-
-	if (trigger)
-		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
-
-	/* For level-triggered GPIOs, the clearing must be done after
-	 * the HW source is cleared, thus after the handler has run */
-	if (bank->level_mask & irq_mask) {
-		_set_gpio_irqenable(bank, gpio, 0);
-		_clear_gpio_irqstatus(bank, gpio);
-	}
-
-	_set_gpio_irqenable(bank, gpio, 1);
-}
-
-static struct irq_chip gpio_irq_chip = {
-	.name		= "GPIO",
-	.irq_shutdown	= gpio_irq_shutdown,
-	.irq_ack	= gpio_ack_irq,
-	.irq_mask	= gpio_mask_irq,
-	.irq_unmask	= gpio_unmask_irq,
-	.irq_set_type	= gpio_irq_type,
-	.irq_set_wake	= gpio_wake_enable,
-};
-
-/*---------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP1
-
-/* MPUIO uses the always-on 32k clock */
-
-static void mpuio_ack_irq(struct irq_data *d)
-{
-	/* The ISR is reset automatically, so do nothing here. */
-}
-
-static void mpuio_mask_irq(struct irq_data *d)
-{
-	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	_set_gpio_irqenable(bank, gpio, 0);
-}
-
-static void mpuio_unmask_irq(struct irq_data *d)
-{
-	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	_set_gpio_irqenable(bank, gpio, 1);
-}
-
-static struct irq_chip mpuio_irq_chip = {
-	.name		= "MPUIO",
-	.irq_ack	= mpuio_ack_irq,
-	.irq_mask	= mpuio_mask_irq,
-	.irq_unmask	= mpuio_unmask_irq,
-	.irq_set_type	= gpio_irq_type,
-#ifdef CONFIG_ARCH_OMAP16XX
-	/* REVISIT: assuming only 16xx supports MPUIO wake events */
-	.irq_set_wake	= gpio_wake_enable,
-#endif
-};
-
-
-#define bank_is_mpuio(bank)	((bank)->method == METHOD_MPUIO)
-
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-#include <linux/platform_device.h>
-
-static int omap_mpuio_suspend_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct gpio_bank	*bank = platform_get_drvdata(pdev);
-	void __iomem		*mask_reg = bank->base +
-					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-	bank->saved_wakeup = __raw_readl(mask_reg);
-	__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-
-static int omap_mpuio_resume_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct gpio_bank	*bank = platform_get_drvdata(pdev);
-	void __iomem		*mask_reg = bank->base +
-					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-	__raw_writel(bank->saved_wakeup, mask_reg);
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-
-static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
-	.suspend_noirq = omap_mpuio_suspend_noirq,
-	.resume_noirq = omap_mpuio_resume_noirq,
-};
-
-/* use platform_driver for this. */
-static struct platform_driver omap_mpuio_driver = {
-	.driver		= {
-		.name	= "mpuio",
-		.pm	= &omap_mpuio_dev_pm_ops,
-	},
-};
-
-static struct platform_device omap_mpuio_device = {
-	.name		= "mpuio",
-	.id		= -1,
-	.dev = {
-		.driver = &omap_mpuio_driver.driver,
-	}
-	/* could list the /proc/iomem resources */
-};
-
-static inline void mpuio_init(void)
-{
-	struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
-	platform_set_drvdata(&omap_mpuio_device, bank);
-
-	if (platform_driver_register(&omap_mpuio_driver) == 0)
-		(void) platform_device_register(&omap_mpuio_device);
-}
-
-#else
-static inline void mpuio_init(void) {}
-#endif	/* 16xx */
-
-#else
-
-extern struct irq_chip mpuio_irq_chip;
-
-#define bank_is_mpuio(bank)	0
-static inline void mpuio_init(void) {}
-
-#endif
-
-/*---------------------------------------------------------------------*/
-
-/* REVISIT these are stupid implementations!  replace by ones that
- * don't switch on METHOD_* and which mostly avoid spinlocks
- */
-
-static int gpio_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	bank = container_of(chip, struct gpio_bank, chip);
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_direction(bank, offset, 1);
-	spin_unlock_irqrestore(&bank->lock, flags);
-	return 0;
-}
-
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
-	void __iomem *reg = bank->base;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
-		break;
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_OE;
-		break;
-	default:
-		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
-		return -EINVAL;
-	}
-	return __raw_readl(reg) & mask;
-}
-
-static int gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank;
-	void __iomem *reg;
-	int gpio;
-	u32 mask;
-
-	gpio = chip->base + offset;
-	bank = get_gpio_bank(gpio);
-	reg = bank->base;
-	mask = 1 << get_gpio_index(gpio);
-
-	if (gpio_is_input(bank, mask))
-		return _get_gpio_datain(bank, gpio);
-	else
-		return _get_gpio_dataout(bank, gpio);
-}
-
-static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	bank = container_of(chip, struct gpio_bank, chip);
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_dataout(bank, offset, value);
-	_set_gpio_direction(bank, offset, 0);
-	spin_unlock_irqrestore(&bank->lock, flags);
-	return 0;
-}
-
-static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
-		unsigned debounce)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	bank = container_of(chip, struct gpio_bank, chip);
-
-	if (!bank->dbck) {
-		bank->dbck = clk_get(bank->dev, "dbclk");
-		if (IS_ERR(bank->dbck))
-			dev_err(bank->dev, "Could not get gpio dbck\n");
-	}
-
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_debounce(bank, offset, debounce);
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-
-static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	bank = container_of(chip, struct gpio_bank, chip);
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_dataout(bank, offset, value);
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank;
-
-	bank = container_of(chip, struct gpio_bank, chip);
-	return bank->virtual_irq_start + offset;
-}
-
-/*---------------------------------------------------------------------*/
-
-static void __init omap_gpio_show_rev(struct gpio_bank *bank)
-{
-	u32 rev;
-
-	if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
-		rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
-	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
-	else if (cpu_is_omap44xx())
-		rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
-	else
-		return;
-
-	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
-		(rev >> 4) & 0x0f, rev & 0x0f);
-}
-
-/* This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-static inline int init_gpio_info(struct platform_device *pdev)
-{
-	/* TODO: Analyze removing gpio_bank_count usage from driver code */
-	gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
-				GFP_KERNEL);
-	if (!gpio_bank) {
-		dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-/* TODO: Cleanup cpu_is_* checks */
-static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
-{
-	if (cpu_class_is_omap2()) {
-		if (cpu_is_omap44xx()) {
-			__raw_writel(0xffffffff, bank->base +
-					OMAP4_GPIO_IRQSTATUSCLR0);
-			__raw_writel(0x00000000, bank->base +
-					 OMAP4_GPIO_DEBOUNCENABLE);
-			/* Initialize interface clk ungated, module enabled */
-			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
-		} else if (cpu_is_omap34xx()) {
-			__raw_writel(0x00000000, bank->base +
-					OMAP24XX_GPIO_IRQENABLE1);
-			__raw_writel(0xffffffff, bank->base +
-					OMAP24XX_GPIO_IRQSTATUS1);
-			__raw_writel(0x00000000, bank->base +
-					OMAP24XX_GPIO_DEBOUNCE_EN);
-
-			/* Initialize interface clk ungated, module enabled */
-			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
-		} else if (cpu_is_omap24xx()) {
-			static const u32 non_wakeup_gpios[] = {
-				0xe203ffc0, 0x08700040
-			};
-			if (id < ARRAY_SIZE(non_wakeup_gpios))
-				bank->non_wakeup_gpios = non_wakeup_gpios[id];
-		}
-	} else if (cpu_class_is_omap1()) {
-		if (bank_is_mpuio(bank))
-			__raw_writew(0xffff, bank->base +
-				OMAP_MPUIO_GPIO_MASKIT / bank->stride);
-		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
-			__raw_writew(0xffff, bank->base
-						+ OMAP1510_GPIO_INT_MASK);
-			__raw_writew(0x0000, bank->base
-						+ OMAP1510_GPIO_INT_STATUS);
-		}
-		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
-			__raw_writew(0x0000, bank->base
-						+ OMAP1610_GPIO_IRQENABLE1);
-			__raw_writew(0xffff, bank->base
-						+ OMAP1610_GPIO_IRQSTATUS1);
-			__raw_writew(0x0014, bank->base
-						+ OMAP1610_GPIO_SYSCONFIG);
-
-			/*
-			 * Enable system clock for GPIO module.
-			 * The CAM_CLK_CTRL *is* really the right place.
-			 */
-			omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
-						ULPD_CAM_CLK_CTRL);
-		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
-			__raw_writel(0xffffffff, bank->base
-						+ OMAP7XX_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base
-						+ OMAP7XX_GPIO_INT_STATUS);
-		}
-	}
-}
-
-static void __init omap_gpio_chip_init(struct gpio_bank *bank)
-{
-	int j;
-	static int gpio;
-
-	bank->mod_usage = 0;
-	/*
-	 * REVISIT eventually switch from OMAP-specific gpio structs
-	 * over to the generic ones
-	 */
-	bank->chip.request = omap_gpio_request;
-	bank->chip.free = omap_gpio_free;
-	bank->chip.direction_input = gpio_input;
-	bank->chip.get = gpio_get;
-	bank->chip.direction_output = gpio_output;
-	bank->chip.set_debounce = gpio_debounce;
-	bank->chip.set = gpio_set;
-	bank->chip.to_irq = gpio_2irq;
-	if (bank_is_mpuio(bank)) {
-		bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP16XX
-		bank->chip.dev = &omap_mpuio_device.dev;
-#endif
-		bank->chip.base = OMAP_MPUIO(0);
-	} else {
-		bank->chip.label = "gpio";
-		bank->chip.base = gpio;
-		gpio += bank_width;
-	}
-	bank->chip.ngpio = bank_width;
-
-	gpiochip_add(&bank->chip);
-
-	for (j = bank->virtual_irq_start;
-		     j < bank->virtual_irq_start + bank_width; j++) {
-		irq_set_lockdep_class(j, &gpio_lock_class);
-		irq_set_chip_data(j, bank);
-		if (bank_is_mpuio(bank))
-			irq_set_chip(j, &mpuio_irq_chip);
-		else
-			irq_set_chip(j, &gpio_irq_chip);
-		irq_set_handler(j, handle_simple_irq);
-		set_irq_flags(j, IRQF_VALID);
-	}
-	irq_set_chained_handler(bank->irq, gpio_irq_handler);
-	irq_set_handler_data(bank->irq, bank);
-}
-
-static int __devinit omap_gpio_probe(struct platform_device *pdev)
-{
-	static int gpio_init_done;
-	struct omap_gpio_platform_data *pdata;
-	struct resource *res;
-	int id;
-	struct gpio_bank *bank;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	pdata = pdev->dev.platform_data;
-
-	if (!gpio_init_done) {
-		int ret;
-
-		ret = init_gpio_info(pdev);
-		if (ret)
-			return ret;
-	}
-
-	id = pdev->id;
-	bank = &gpio_bank[id];
-
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
-		return -ENODEV;
-	}
-
-	bank->irq = res->start;
-	bank->virtual_irq_start = pdata->virtual_irq_start;
-	bank->method = pdata->bank_type;
-	bank->dev = &pdev->dev;
-	bank->dbck_flag = pdata->dbck_flag;
-	bank->stride = pdata->bank_stride;
-	bank_width = pdata->bank_width;
-
-	spin_lock_init(&bank->lock);
-
-	/* Static mapping, never released */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
-		return -ENODEV;
-	}
-
-	bank->base = ioremap(res->start, resource_size(res));
-	if (!bank->base) {
-		dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
-		return -ENOMEM;
-	}
-
-	pm_runtime_enable(bank->dev);
-	pm_runtime_get_sync(bank->dev);
-
-	omap_gpio_mod_init(bank, id);
-	omap_gpio_chip_init(bank);
-	omap_gpio_show_rev(bank);
-
-	if (!gpio_init_done)
-		gpio_init_done = 1;
-
-	return 0;
-}
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-static int omap_gpio_suspend(void)
-{
-	int i;
-
-	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
-		return 0;
-
-	for (i = 0; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		void __iomem *wake_status;
-		void __iomem *wake_clear;
-		void __iomem *wake_set;
-		unsigned long flags;
-
-		switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
-		case METHOD_GPIO_1610:
-			wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
-			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
-			break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		case METHOD_GPIO_24XX:
-			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
-			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
-			break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-		case METHOD_GPIO_44XX:
-			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			break;
-#endif
-		default:
-			continue;
-		}
-
-		spin_lock_irqsave(&bank->lock, flags);
-		bank->saved_wakeup = __raw_readl(wake_status);
-		__raw_writel(0xffffffff, wake_clear);
-		__raw_writel(bank->suspend_wakeup, wake_set);
-		spin_unlock_irqrestore(&bank->lock, flags);
-	}
-
-	return 0;
-}
-
-static void omap_gpio_resume(void)
-{
-	int i;
-
-	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
-		return;
-
-	for (i = 0; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		void __iomem *wake_clear;
-		void __iomem *wake_set;
-		unsigned long flags;
-
-		switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
-		case METHOD_GPIO_1610:
-			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
-			break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		case METHOD_GPIO_24XX:
-			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
-			break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-		case METHOD_GPIO_44XX:
-			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			break;
-#endif
-		default:
-			continue;
-		}
-
-		spin_lock_irqsave(&bank->lock, flags);
-		__raw_writel(0xffffffff, wake_clear);
-		__raw_writel(bank->saved_wakeup, wake_set);
-		spin_unlock_irqrestore(&bank->lock, flags);
-	}
-}
-
-static struct syscore_ops omap_gpio_syscore_ops = {
-	.suspend	= omap_gpio_suspend,
-	.resume		= omap_gpio_resume,
-};
-
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-static int workaround_enabled;
-
-void omap2_gpio_prepare_for_idle(int off_mode)
-{
-	int i, c = 0;
-	int min = 0;
-
-	if (cpu_is_omap34xx())
-		min = 1;
-
-	for (i = min; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l1 = 0, l2 = 0;
-		int j;
-
-		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
-			clk_disable(bank->dbck);
-
-		if (!off_mode)
-			continue;
-
-		/* If going to OFF, remove triggering for all
-		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
-		 * generated.  See OMAP2420 Errata item 1.101. */
-		if (!(bank->enabled_non_wakeup_gpios))
-			continue;
-
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			bank->saved_datain = __raw_readl(bank->base +
-					OMAP24XX_GPIO_DATAIN);
-			l1 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_FALLINGDETECT);
-			l2 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_RISINGDETECT);
-		}
-
-		if (cpu_is_omap44xx()) {
-			bank->saved_datain = __raw_readl(bank->base +
-						OMAP4_GPIO_DATAIN);
-			l1 = __raw_readl(bank->base +
-						OMAP4_GPIO_FALLINGDETECT);
-			l2 = __raw_readl(bank->base +
-						OMAP4_GPIO_RISINGDETECT);
-		}
-
-		bank->saved_fallingdetect = l1;
-		bank->saved_risingdetect = l2;
-		l1 &= ~bank->enabled_non_wakeup_gpios;
-		l2 &= ~bank->enabled_non_wakeup_gpios;
-
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			__raw_writel(l1, bank->base +
-					OMAP24XX_GPIO_FALLINGDETECT);
-			__raw_writel(l2, bank->base +
-					OMAP24XX_GPIO_RISINGDETECT);
-		}
-
-		if (cpu_is_omap44xx()) {
-			__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
-			__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
-		}
-
-		c++;
-	}
-	if (!c) {
-		workaround_enabled = 0;
-		return;
-	}
-	workaround_enabled = 1;
-}
-
-void omap2_gpio_resume_after_idle(void)
-{
-	int i;
-	int min = 0;
-
-	if (cpu_is_omap34xx())
-		min = 1;
-	for (i = min; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l = 0, gen, gen0, gen1;
-		int j;
-
-		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
-			clk_enable(bank->dbck);
-
-		if (!workaround_enabled)
-			continue;
-
-		if (!(bank->enabled_non_wakeup_gpios))
-			continue;
-
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			__raw_writel(bank->saved_fallingdetect,
-				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-			__raw_writel(bank->saved_risingdetect,
-				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
-			l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-		}
-
-		if (cpu_is_omap44xx()) {
-			__raw_writel(bank->saved_fallingdetect,
-				 bank->base + OMAP4_GPIO_FALLINGDETECT);
-			__raw_writel(bank->saved_risingdetect,
-				 bank->base + OMAP4_GPIO_RISINGDETECT);
-			l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
-		}
-
-		/* Check if any of the non-wakeup interrupt GPIOs have changed
-		 * state.  If so, generate an IRQ by software.  This is
-		 * horribly racy, but it's the best we can do to work around
-		 * this silicon bug. */
-		l ^= bank->saved_datain;
-		l &= bank->enabled_non_wakeup_gpios;
-
-		/*
-		 * No need to generate IRQs for the rising edge for gpio IRQs
-		 * configured with falling edge only; and vice versa.
-		 */
-		gen0 = l & bank->saved_fallingdetect;
-		gen0 &= bank->saved_datain;
-
-		gen1 = l & bank->saved_risingdetect;
-		gen1 &= ~(bank->saved_datain);
-
-		/* FIXME: Consider GPIO IRQs with level detections properly! */
-		gen = l & (~(bank->saved_fallingdetect) &
-				~(bank->saved_risingdetect));
-		/* Consider all GPIO IRQs needed to be updated */
-		gen |= gen0 | gen1;
-
-		if (gen) {
-			u32 old0, old1;
-
-			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-				old0 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				old1 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-				__raw_writel(old0 | gen, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				__raw_writel(old1 | gen, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-				__raw_writel(old0, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				__raw_writel(old1, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-			}
-
-			if (cpu_is_omap44xx()) {
-				old0 = __raw_readl(bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				old1 = __raw_readl(bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-				__raw_writel(old0 | l, bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				__raw_writel(old1 | l, bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-				__raw_writel(old0, bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				__raw_writel(old1, bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-			}
-		}
-	}
-
-}
-
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-/* save the registers of bank 2-6 */
-void omap_gpio_save_context(void)
-{
-	int i;
-
-	/* saving banks from 2-6 only since GPIO1 is in WKUP */
-	for (i = 1; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		gpio_context[i].irqenable1 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		gpio_context[i].irqenable2 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		gpio_context[i].wake_en =
-			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
-		gpio_context[i].ctrl =
-			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-		gpio_context[i].oe =
-			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
-		gpio_context[i].leveldetect0 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		gpio_context[i].leveldetect1 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		gpio_context[i].risingdetect =
-			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		gpio_context[i].fallingdetect =
-			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		gpio_context[i].dataout =
-			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
-	}
-}
-
-/* restore the required registers of bank 2-6 */
-void omap_gpio_restore_context(void)
-{
-	int i;
-
-	for (i = 1; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		__raw_writel(gpio_context[i].irqenable1,
-				bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		__raw_writel(gpio_context[i].irqenable2,
-				bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		__raw_writel(gpio_context[i].wake_en,
-				bank->base + OMAP24XX_GPIO_WAKE_EN);
-		__raw_writel(gpio_context[i].ctrl,
-				bank->base + OMAP24XX_GPIO_CTRL);
-		__raw_writel(gpio_context[i].oe,
-				bank->base + OMAP24XX_GPIO_OE);
-		__raw_writel(gpio_context[i].leveldetect0,
-				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		__raw_writel(gpio_context[i].leveldetect1,
-				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		__raw_writel(gpio_context[i].risingdetect,
-				bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		__raw_writel(gpio_context[i].fallingdetect,
-				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		__raw_writel(gpio_context[i].dataout,
-				bank->base + OMAP24XX_GPIO_DATAOUT);
-	}
-}
-#endif
-
-static struct platform_driver omap_gpio_driver = {
-	.probe		= omap_gpio_probe,
-	.driver		= {
-		.name	= "omap_gpio",
-	},
-};
-
-/*
- * gpio driver register needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap_gpio_drv_reg() is a postcore_initcall.
- */
-static int __init omap_gpio_drv_reg(void)
-{
-	return platform_driver_register(&omap_gpio_driver);
-}
-postcore_initcall(omap_gpio_drv_reg);
-
-static int __init omap_gpio_sysinit(void)
-{
-	mpuio_init();
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-	if (cpu_is_omap16xx() || cpu_class_is_omap2())
-		register_syscore_ops(&omap_gpio_syscore_ops);
-#endif
-
-	return 0;
-}
-
-arch_initcall(omap_gpio_sysinit);
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index cac2e8ac6968..ec97e00cb581 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -52,6 +52,109 @@
 
 #define OMAP34XX_NR_GPIOS		6
 
+/*
+ * OMAP1510 GPIO registers
+ */
+#define OMAP1510_GPIO_DATA_INPUT	0x00
+#define OMAP1510_GPIO_DATA_OUTPUT	0x04
+#define OMAP1510_GPIO_DIR_CONTROL	0x08
+#define OMAP1510_GPIO_INT_CONTROL	0x0c
+#define OMAP1510_GPIO_INT_MASK		0x10
+#define OMAP1510_GPIO_INT_STATUS	0x14
+#define OMAP1510_GPIO_PIN_CONTROL	0x18
+
+#define OMAP1510_IH_GPIO_BASE		64
+
+/*
+ * OMAP1610 specific GPIO registers
+ */
+#define OMAP1610_GPIO_REVISION		0x0000
+#define OMAP1610_GPIO_SYSCONFIG		0x0010
+#define OMAP1610_GPIO_SYSSTATUS		0x0014
+#define OMAP1610_GPIO_IRQSTATUS1	0x0018
+#define OMAP1610_GPIO_IRQENABLE1	0x001c
+#define OMAP1610_GPIO_WAKEUPENABLE	0x0028
+#define OMAP1610_GPIO_DATAIN		0x002c
+#define OMAP1610_GPIO_DATAOUT		0x0030
+#define OMAP1610_GPIO_DIRECTION		0x0034
+#define OMAP1610_GPIO_EDGE_CTRL1	0x0038
+#define OMAP1610_GPIO_EDGE_CTRL2	0x003c
+#define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c
+#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8
+#define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0
+#define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc
+#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8
+#define OMAP1610_GPIO_SET_DATAOUT	0x00f0
+
+/*
+ * OMAP7XX specific GPIO registers
+ */
+#define OMAP7XX_GPIO_DATA_INPUT		0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
+#define OMAP7XX_GPIO_DIR_CONTROL	0x08
+#define OMAP7XX_GPIO_INT_CONTROL	0x0c
+#define OMAP7XX_GPIO_INT_MASK		0x10
+#define OMAP7XX_GPIO_INT_STATUS		0x14
+
+/*
+ * omap2+ specific GPIO registers
+ */
+#define OMAP24XX_GPIO_REVISION		0x0000
+#define OMAP24XX_GPIO_IRQSTATUS1	0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2	0x0028
+#define OMAP24XX_GPIO_IRQENABLE2	0x002c
+#define OMAP24XX_GPIO_IRQENABLE1	0x001c
+#define OMAP24XX_GPIO_WAKE_EN		0x0020
+#define OMAP24XX_GPIO_CTRL		0x0030
+#define OMAP24XX_GPIO_OE		0x0034
+#define OMAP24XX_GPIO_DATAIN		0x0038
+#define OMAP24XX_GPIO_DATAOUT		0x003c
+#define OMAP24XX_GPIO_LEVELDETECT0	0x0040
+#define OMAP24XX_GPIO_LEVELDETECT1	0x0044
+#define OMAP24XX_GPIO_RISINGDETECT	0x0048
+#define OMAP24XX_GPIO_FALLINGDETECT	0x004c
+#define OMAP24XX_GPIO_DEBOUNCE_EN	0x0050
+#define OMAP24XX_GPIO_DEBOUNCE_VAL	0x0054
+#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060
+#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064
+#define OMAP24XX_GPIO_CLEARWKUENA	0x0080
+#define OMAP24XX_GPIO_SETWKUENA		0x0084
+#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
+#define OMAP24XX_GPIO_SETDATAOUT	0x0094
+
+#define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_EOI			0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
+#define OMAP4_GPIO_IRQSTATUS0		0x002c
+#define OMAP4_GPIO_IRQSTATUS1		0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
+#define OMAP4_GPIO_IRQWAKEN0		0x0044
+#define OMAP4_GPIO_IRQWAKEN1		0x0048
+#define OMAP4_GPIO_IRQENABLE1		0x011c
+#define OMAP4_GPIO_WAKE_EN		0x0120
+#define OMAP4_GPIO_IRQSTATUS2		0x0128
+#define OMAP4_GPIO_IRQENABLE2		0x012c
+#define OMAP4_GPIO_CTRL			0x0130
+#define OMAP4_GPIO_OE			0x0134
+#define OMAP4_GPIO_DATAIN		0x0138
+#define OMAP4_GPIO_DATAOUT		0x013c
+#define OMAP4_GPIO_LEVELDETECT0		0x0140
+#define OMAP4_GPIO_LEVELDETECT1		0x0144
+#define OMAP4_GPIO_RISINGDETECT		0x0148
+#define OMAP4_GPIO_FALLINGDETECT	0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP4_GPIO_SETIRQENABLE1	0x0164
+#define OMAP4_GPIO_CLEARWKUENA		0x0180
+#define OMAP4_GPIO_SETWKUENA		0x0184
+#define OMAP4_GPIO_CLEARDATAOUT		0x0190
+#define OMAP4_GPIO_SETDATAOUT		0x0194
+
 #define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
 #define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
 
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index e9de58a2e294..53eb15b0a07d 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -19,7 +19,6 @@ obj-y				+= gpio.o
 obj-y				+= gpio-config.o
 obj-y				+= dev-asocdma.o
 
-obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT)	+= gpiolib.o
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
 
 obj-$(CONFIG_SAMSUNG_IRQ_UART)	+= irq-uart.o
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
deleted file mode 100644
index ea37c0461788..000000000000
--- a/arch/arm/plat-samsung/gpiolib.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/* arch/arm/plat-samsung/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
-				      unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + GPIOCON_OFF);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, base + GPIOCON_OFF);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
-				       unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
-					unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned con_offset = offset;
-
-	if (con_offset > 7)
-		con_offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
-					    int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit2(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++)
-		s3c_gpiolib_add(chip);
-}