[PATCH] m68knommu: read/write register access for ColdFire core timer

Modify the m68knommu/ColdFire core timer code to use register offsets
with raw_read/raw_write access, instead of a mapped struct.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 23 insertions, 26 deletions

diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c
index ef49596aa09c..83b8b89dfa09 100644
--- a/arch/m68knommu/platform/5307/timers.c
+++ b/arch/m68knommu/platform/5307/timers.c
@@ -14,6 +14,7 @@
 #include <linux/param.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/traps.h>
 #include <asm/machdep.h>
@@ -24,6 +25,11 @@
 /***************************************************************************/
 
 /*
+ *	By default use timer1 as the system clock timer.
+ */
+#define	TA(a)	(MCF_MBAR + MCFTIMER_BASE1 + (a))
+
+/*
  *	Default the timer and vector to use for ColdFire. Some ColdFire
  *	CPU's and some boards may want different. Their sub-architecture
  *	startup code (in config.c) can change these if they want.
@@ -32,8 +38,6 @@ unsigned int	mcf_timervector = 29;
 unsigned int	mcf_profilevector = 31;
 unsigned int	mcf_timerlevel = 5;
 
-static volatile struct mcftimer *mcf_timerp;
-
 /*
  *	These provide the underlying interrupt vector support.
  *	Unfortunately it is a little different on each ColdFire.
@@ -46,20 +50,17 @@ extern int mcf_timerirqpending(int timer);
 void coldfire_tick(void)
 {
 	/* Reset the ColdFire timer */
-	mcf_timerp->ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
+	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
 }
 
 /***************************************************************************/
 
 void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *))
 {
-	/* Set up an internal TIMER as poll clock */
-	mcf_timerp = (volatile struct mcftimer *) (MCF_MBAR + MCFTIMER_BASE1);
-	mcf_timerp->tmr = MCFTIMER_TMR_DISABLE;
-
-	mcf_timerp->trr = (unsigned short) ((MCF_BUSCLK / 16) / HZ);
-	mcf_timerp->tmr = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
-		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;
+	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
+	__raw_writew(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR));
+	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
 
 	request_irq(mcf_timervector, handler, SA_INTERRUPT, "timer", NULL);
 	mcf_settimericr(1, mcf_timerlevel);
@@ -75,13 +76,8 @@ unsigned long coldfire_timer_offset(void)
 {
 	unsigned long trr, tcn, offset;
 
-	/*
-	 * The change to pointer and de-reference is to force the compiler
-	 * to read the registers with a single 16bit access. Otherwise it
-	 * does some crazy 8bit read combining.
-	 */
-	tcn = *(&mcf_timerp->tcn);
-	trr = *(&mcf_timerp->trr);
+	tcn = __raw_readw(TA(MCFTIMER_TCN));
+	trr = __raw_readw(TA(MCFTIMER_TRR));
 	offset = (tcn * (1000000 / HZ)) / trr;
 
 	/* Check if we just wrapped the counters and maybe missed a tick */
@@ -95,21 +91,23 @@ unsigned long coldfire_timer_offset(void)
 /***************************************************************************/
 
 /*
+ *	By default use timer2 as the profiler clock timer.
+ */
+#define	PA(a)	(MCF_MBAR + MCFTIMER_BASE2 + (a))
+
+/*
  *	Choose a reasonably fast profile timer. Make it an odd value to
  *	try and get good coverage of kernal operations.
  */
 #define	PROFILEHZ	1013
 
-static volatile struct mcftimer *mcf_proftp;
-
 /*
  *	Use the other timer to provide high accuracy profiling info.
  */
-
 void coldfire_profile_tick(int irq, void *dummy, struct pt_regs *regs)
 {
 	/* Reset ColdFire timer2 */
-	mcf_proftp->ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
+	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
 	if (current->pid)
 		profile_tick(CPU_PROFILING, regs);
 }
@@ -121,12 +119,11 @@ void coldfire_profile_init(void)
 	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
 
 	/* Set up TIMER 2 as high speed profile clock */
-	mcf_proftp = (volatile struct mcftimer *) (MCF_MBAR + MCFTIMER_BASE2);
-	mcf_proftp->tmr = MCFTIMER_TMR_DISABLE;
+	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
 
-	mcf_proftp->trr = (unsigned short) ((MCF_CLK / 16) / PROFILEHZ);
-	mcf_proftp->tmr = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
-		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;
+	__raw_writew(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
 
 	request_irq(mcf_profilevector, coldfire_profile_tick,
 		(SA_INTERRUPT | IRQ_FLG_FAST), "profile timer", NULL);