s390/vx: add support functions for in-kernel FPU use

Introduce the kernel_fpu_begin() and kernel_fpu_end() function
to enclose any in-kernel use of FPU instructions and registers.
In enclosed sections, you can perform floating-point or vector
(SIMD) computations.  The functions take care of saving and
restoring FPU register contents and controls.

For usage details, see the guidelines in arch/s390/include/asm/fpu/api.h

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

4 files changed, 335 insertions, 1 deletions

diff --git a/arch/s390/include/asm/fpu/api.h b/arch/s390/include/asm/fpu/api.h
index 5e04f3cbd320..78ba3ddb9e18 100644
--- a/arch/s390/include/asm/fpu/api.h
+++ b/arch/s390/include/asm/fpu/api.h
@@ -1,6 +1,41 @@
 /*
  * In-kernel FPU support functions
  *
+ *
+ * Consider these guidelines before using in-kernel FPU functions:
+ *
+ *  1. Use kernel_fpu_begin() and kernel_fpu_end() to enclose all in-kernel
+ *     use of floating-point or vector registers and instructions.
+ *
+ *  2. For kernel_fpu_begin(), specify the vector register range you want to
+ *     use with the KERNEL_VXR_* constants. Consider these usage guidelines:
+ *
+ *     a) If your function typically runs in process-context, use the lower
+ *	  half of the vector registers, for example, specify KERNEL_VXR_LOW.
+ *     b) If your function typically runs in soft-irq or hard-irq context,
+ *	  prefer using the upper half of the vector registers, for example,
+ *	  specify KERNEL_VXR_HIGH.
+ *
+ *     If you adhere to these guidelines, an interrupted process context
+ *     does not require to save and restore vector registers because of
+ *     disjoint register ranges.
+ *
+ *     Also note that the __kernel_fpu_begin()/__kernel_fpu_end() functions
+ *     includes logic to save and restore up to 16 vector registers at once.
+ *
+ *  3. You can nest kernel_fpu_begin()/kernel_fpu_end() by using different
+ *     struct kernel_fpu states.  Vector registers that are in use by outer
+ *     levels are saved and restored.  You can minimize the save and restore
+ *     effort by choosing disjoint vector register ranges.
+ *
+ *  5. To use vector floating-point instructions, specify the KERNEL_FPC
+ *     flag to save and restore floating-point controls in addition to any
+ *     vector register range.
+ *
+ *  6. To use floating-point registers and instructions only, specify the
+ *     KERNEL_FPR flag.  This flag triggers a save and restore of vector
+ *     registers V0 to V15 and floating-point controls.
+ *
  * Copyright IBM Corp. 2015
  * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
  */
@@ -8,6 +43,8 @@
 #ifndef _ASM_S390_FPU_API_H
 #define _ASM_S390_FPU_API_H
 
+#include <linux/preempt.h>
+
 void save_fpu_regs(void);
 
 static inline int test_fp_ctl(u32 fpc)
@@ -27,4 +64,42 @@ static inline int test_fp_ctl(u32 fpc)
 	return rc;
 }
 
+#define KERNEL_VXR_V0V7		1
+#define KERNEL_VXR_V8V15	2
+#define KERNEL_VXR_V16V23	4
+#define KERNEL_VXR_V24V31	8
+#define KERNEL_FPR		16
+#define KERNEL_FPC		256
+
+#define KERNEL_VXR_LOW		(KERNEL_VXR_V0V7|KERNEL_VXR_V8V15)
+#define KERNEL_VXR_MID		(KERNEL_VXR_V8V15|KERNEL_VXR_V16V23)
+#define KERNEL_VXR_HIGH		(KERNEL_VXR_V16V23|KERNEL_VXR_V24V31)
+
+#define KERNEL_FPU_MASK		(KERNEL_VXR_LOW|KERNEL_VXR_HIGH|KERNEL_FPR)
+
+struct kernel_fpu;
+
+/*
+ * Note the functions below must be called with preemption disabled.
+ * Do not enable preemption before calling __kernel_fpu_end() to prevent
+ * an corruption of an existing kernel FPU state.
+ *
+ * Prefer using the kernel_fpu_begin()/kernel_fpu_end() pair of functions.
+ */
+void __kernel_fpu_begin(struct kernel_fpu *state, u32 flags);
+void __kernel_fpu_end(struct kernel_fpu *state);
+
+
+static inline void kernel_fpu_begin(struct kernel_fpu *state, u32 flags)
+{
+	preempt_disable();
+	__kernel_fpu_begin(state, flags);
+}
+
+static inline void kernel_fpu_end(struct kernel_fpu *state)
+{
+	__kernel_fpu_end(state);
+	preempt_enable();
+}
+
 #endif /* _ASM_S390_FPU_API_H */
diff --git a/arch/s390/include/asm/fpu/types.h b/arch/s390/include/asm/fpu/types.h
index fe937c9b6471..bce255ead72b 100644
--- a/arch/s390/include/asm/fpu/types.h
+++ b/arch/s390/include/asm/fpu/types.h
@@ -24,4 +24,14 @@ struct fpu {
 /* VX array structure for address operand constraints in inline assemblies */
 struct vx_array { __vector128 _[__NUM_VXRS]; };
 
+/* In-kernel FPU state structure */
+struct kernel_fpu {
+	u32	    mask;
+	u32	    fpc;
+	union {
+		freg_t fprs[__NUM_FPRS];
+		__vector128 vxrs[__NUM_VXRS];
+	};
+};
+
 #endif /* _ASM_S390_FPU_TYPES_H */
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 2f5586ab8a6a..8d1419120bb7 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -45,7 +45,7 @@ obj-y	:= traps.o time.o process.o base.o early.o setup.o idle.o vtime.o
 obj-y	+= processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o
 obj-y	+= debug.o irq.o ipl.o dis.o diag.o sclp.o vdso.o
 obj-y	+= sysinfo.o jump_label.o lgr.o os_info.o machine_kexec.o pgm_check.o
-obj-y	+= runtime_instr.o cache.o dumpstack.o
+obj-y	+= runtime_instr.o cache.o fpu.o dumpstack.o
 obj-y	+= entry.o reipl.o relocate_kernel.o
 
 extra-y				+= head.o head64.o vmlinux.lds
diff --git a/arch/s390/kernel/fpu.c b/arch/s390/kernel/fpu.c
new file mode 100644
index 000000000000..81d1d1887507
--- /dev/null
+++ b/arch/s390/kernel/fpu.c
@@ -0,0 +1,249 @@
+/*
+ * In-kernel vector facility support functions
+ *
+ * Copyright IBM Corp. 2015
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ */
+#include <linux/kernel.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+#include <asm/fpu/types.h>
+#include <asm/fpu/api.h>
+
+/*
+ * Per-CPU variable to maintain FPU register ranges that are in use
+ * by the kernel.
+ */
+static DEFINE_PER_CPU(u32, kernel_fpu_state);
+
+#define KERNEL_FPU_STATE_MASK	(KERNEL_FPU_MASK|KERNEL_FPC)
+
+
+void __kernel_fpu_begin(struct kernel_fpu *state, u32 flags)
+{
+	if (!__this_cpu_read(kernel_fpu_state)) {
+		/*
+		 * Save user space FPU state and register contents.  Multiple
+		 * calls because of interruptions do not matter and return
+		 * immediately.  This also sets CIF_FPU to lazy restore FP/VX
+		 * register contents when returning to user space.
+		 */
+		save_fpu_regs();
+	}
+
+	/* Update flags to use the vector facility for KERNEL_FPR */
+	if (MACHINE_HAS_VX && (state->mask & KERNEL_FPR)) {
+		flags |= KERNEL_VXR_LOW | KERNEL_FPC;
+		flags &= ~KERNEL_FPR;
+	}
+
+	/* Save and update current kernel VX state */
+	state->mask = __this_cpu_read(kernel_fpu_state);
+	__this_cpu_or(kernel_fpu_state, flags & KERNEL_FPU_STATE_MASK);
+
+	/*
+	 * If this is the first call to __kernel_fpu_begin(), no additional
+	 * work is required.
+	 */
+	if (!(state->mask & KERNEL_FPU_STATE_MASK))
+		return;
+
+	/*
+	 * If KERNEL_FPR is still set, the vector facility is not available
+	 * and, thus, save floating-point control and registers only.
+	 */
+	if (state->mask & KERNEL_FPR) {
+		asm volatile("stfpc %0" : "=Q" (state->fpc));
+		asm volatile("std 0,%0" : "=Q" (state->fprs[0]));
+		asm volatile("std 1,%0" : "=Q" (state->fprs[1]));
+		asm volatile("std 2,%0" : "=Q" (state->fprs[2]));
+		asm volatile("std 3,%0" : "=Q" (state->fprs[3]));
+		asm volatile("std 4,%0" : "=Q" (state->fprs[4]));
+		asm volatile("std 5,%0" : "=Q" (state->fprs[5]));
+		asm volatile("std 6,%0" : "=Q" (state->fprs[6]));
+		asm volatile("std 7,%0" : "=Q" (state->fprs[7]));
+		asm volatile("std 8,%0" : "=Q" (state->fprs[8]));
+		asm volatile("std 9,%0" : "=Q" (state->fprs[9]));
+		asm volatile("std 10,%0" : "=Q" (state->fprs[10]));
+		asm volatile("std 11,%0" : "=Q" (state->fprs[11]));
+		asm volatile("std 12,%0" : "=Q" (state->fprs[12]));
+		asm volatile("std 13,%0" : "=Q" (state->fprs[13]));
+		asm volatile("std 14,%0" : "=Q" (state->fprs[14]));
+		asm volatile("std 15,%0" : "=Q" (state->fprs[15]));
+		return;
+	}
+
+	/*
+	 * If this is a nested call to __kernel_fpu_begin(), check the saved
+	 * state mask to save and later restore the vector registers that
+	 * are already in use.	Let's start with checking floating-point
+	 * controls.
+	 */
+	if (state->mask & KERNEL_FPC)
+		asm volatile("stfpc %0" : "=m" (state->fpc));
+
+	/* Test and save vector registers */
+	asm volatile (
+		/*
+		 * Test if any vector register must be saved and, if so,
+		 * test if all register can be saved.
+		 */
+		"	tmll	%[m],15\n"	/* KERNEL_VXR_MASK */
+		"	jz	20f\n"		/* no work -> done */
+		"	la	1,%[vxrs]\n"	/* load save area */
+		"	jo	18f\n"		/* -> save V0..V31 */
+
+		/*
+		 * Test if V8..V23 can be saved at once... this speeds up
+		 * for KERNEL_fpu_MID only. Otherwise continue to split the
+		 * range of vector registers into two halves and test them
+		 * separately.
+		 */
+		"	tmll	%[m],6\n"	/* KERNEL_VXR_MID */
+		"	jo	17f\n"		/* -> save V8..V23 */
+
+		/* Test and save the first half of 16 vector registers */
+		"1:	tmll	%[m],3\n"	/* KERNEL_VXR_LOW */
+		"	jz	10f\n"		/* -> KERNEL_VXR_HIGH */
+		"	jo	2f\n"		/* 11 -> save V0..V15 */
+		"	brc	4,3f\n"		/* 01 -> save V0..V7  */
+		"	brc	2,4f\n"		/* 10 -> save V8..V15 */
+
+		/* Test and save the second half of 16 vector registers */
+		"10:	tmll	%[m],12\n"	/* KERNEL_VXR_HIGH */
+		"	jo	19f\n"		/* 11 -> save V16..V31 */
+		"	brc	4,11f\n"	/* 01 -> save V16..V23	*/
+		"	brc	2,12f\n"	/* 10 -> save V24..V31 */
+		"	j	20f\n"		/* 00 -> done */
+
+		/*
+		 * Below are the vstm combinations to save multiple vector
+		 * registers at once.
+		 */
+		"2:	.word	0xe70f,0x1000,0x003e\n"	/* vstm 0,15,0(1) */
+		"	j	10b\n"			/* -> VXR_HIGH */
+		"3:	.word	0xe707,0x1000,0x003e\n" /* vstm 0,7,0(1) */
+		"	j	10b\n"			/* -> VXR_HIGH */
+		"4:	.word	0xe78f,0x1080,0x003e\n" /* vstm 8,15,128(1) */
+		"	j	10b\n"			/* -> VXR_HIGH */
+		"\n"
+		"11:	.word	0xe707,0x1100,0x0c3e\n"	/* vstm 16,23,256(1) */
+		"	j	20f\n"			/* -> done */
+		"12:	.word	0xe78f,0x1180,0x0c3e\n" /* vstm 24,31,384(1) */
+		"	j	20f\n"			/* -> done */
+		"\n"
+		"17:	.word	0xe787,0x1080,0x043e\n"	/* vstm 8,23,128(1) */
+		"	nill	%[m],249\n"		/* m &= ~VXR_MID    */
+		"	j	1b\n"			/* -> VXR_LOW */
+		"\n"
+		"18:	.word	0xe70f,0x1000,0x003e\n"	/* vstm 0,15,0(1) */
+		"19:	.word	0xe70f,0x1100,0x0c3e\n"	/* vstm 16,31,256(1) */
+		"20:"
+		: [vxrs] "=Q" (*(struct vx_array *) &state->vxrs)
+		: [m] "d" (state->mask)
+		: "1", "cc");
+}
+EXPORT_SYMBOL(__kernel_fpu_begin);
+
+void __kernel_fpu_end(struct kernel_fpu *state)
+{
+	/* Just update the per-CPU state if there is nothing to restore */
+	if (!(state->mask & KERNEL_FPU_STATE_MASK))
+		goto update_fpu_state;
+
+	/*
+	 * If KERNEL_FPR is specified, the vector facility is not available
+	 * and, thus, restore floating-point control and registers only.
+	 */
+	if (state->mask & KERNEL_FPR) {
+		asm volatile("lfpc %0" : : "Q" (state->fpc));
+		asm volatile("ld 0,%0" : : "Q" (state->fprs[0]));
+		asm volatile("ld 1,%0" : : "Q" (state->fprs[1]));
+		asm volatile("ld 2,%0" : : "Q" (state->fprs[2]));
+		asm volatile("ld 3,%0" : : "Q" (state->fprs[3]));
+		asm volatile("ld 4,%0" : : "Q" (state->fprs[4]));
+		asm volatile("ld 5,%0" : : "Q" (state->fprs[5]));
+		asm volatile("ld 6,%0" : : "Q" (state->fprs[6]));
+		asm volatile("ld 7,%0" : : "Q" (state->fprs[7]));
+		asm volatile("ld 8,%0" : : "Q" (state->fprs[8]));
+		asm volatile("ld 9,%0" : : "Q" (state->fprs[9]));
+		asm volatile("ld 10,%0" : : "Q" (state->fprs[10]));
+		asm volatile("ld 11,%0" : : "Q" (state->fprs[11]));
+		asm volatile("ld 12,%0" : : "Q" (state->fprs[12]));
+		asm volatile("ld 13,%0" : : "Q" (state->fprs[13]));
+		asm volatile("ld 14,%0" : : "Q" (state->fprs[14]));
+		asm volatile("ld 15,%0" : : "Q" (state->fprs[15]));
+		goto update_fpu_state;
+	}
+
+	/* Test and restore floating-point controls */
+	if (state->mask & KERNEL_FPC)
+		asm volatile("lfpc %0" : : "Q" (state->fpc));
+
+	/* Test and restore (load) vector registers */
+	asm volatile (
+		/*
+		 * Test if any vector registers must be loaded and, if so,
+		 * test if all registers can be loaded at once.
+		 */
+		"	tmll	%[m],15\n"	/* KERNEL_VXR_MASK */
+		"	jz	20f\n"		/* no work -> done */
+		"	la	1,%[vxrs]\n"	/* load load area */
+		"	jo	18f\n"		/* -> load V0..V31 */
+
+		/*
+		 * Test if V8..V23 can be restored at once... this speeds up
+		 * for KERNEL_VXR_MID only. Otherwise continue to split the
+		 * range of vector registers into two halves and test them
+		 * separately.
+		 */
+		"	tmll	%[m],6\n"	/* KERNEL_VXR_MID */
+		"	jo	17f\n"		/* -> load V8..V23 */
+
+		/* Test and load the first half of 16 vector registers */
+		"1:	tmll	%[m],3\n"	/* KERNEL_VXR_LOW */
+		"	jz	10f\n"		/* -> KERNEL_VXR_HIGH */
+		"	jo	2f\n"		/* 11 -> load V0..V15 */
+		"	brc	4,3f\n"		/* 01 -> load V0..V7  */
+		"	brc	2,4f\n"		/* 10 -> load V8..V15 */
+
+		/* Test and load the second half of 16 vector registers */
+		"10:	tmll	%[m],12\n"	/* KERNEL_VXR_HIGH */
+		"	jo	19f\n"		/* 11 -> load V16..V31 */
+		"	brc	4,11f\n"	/* 01 -> load V16..V23	*/
+		"	brc	2,12f\n"	/* 10 -> load V24..V31 */
+		"	j	20f\n"		/* 00 -> done */
+
+		/*
+		 * Below are the vstm combinations to load multiple vector
+		 * registers at once.
+		 */
+		"2:	.word	0xe70f,0x1000,0x0036\n"	/* vlm 0,15,0(1) */
+		"	j	10b\n"			/* -> VXR_HIGH */
+		"3:	.word	0xe707,0x1000,0x0036\n" /* vlm 0,7,0(1) */
+		"	j	10b\n"			/* -> VXR_HIGH */
+		"4:	.word	0xe78f,0x1080,0x0036\n" /* vlm 8,15,128(1) */
+		"	j	10b\n"			/* -> VXR_HIGH */
+		"\n"
+		"11:	.word	0xe707,0x1100,0x0c36\n"	/* vlm 16,23,256(1) */
+		"	j	20f\n"			/* -> done */
+		"12:	.word	0xe78f,0x1180,0x0c36\n" /* vlm 24,31,384(1) */
+		"	j	20f\n"			/* -> done */
+		"\n"
+		"17:	.word	0xe787,0x1080,0x0436\n"	/* vlm 8,23,128(1) */
+		"	nill	%[m],249\n"		/* m &= ~VXR_MID    */
+		"	j	1b\n"			/* -> VXR_LOW */
+		"\n"
+		"18:	.word	0xe70f,0x1000,0x0036\n"	/* vlm 0,15,0(1) */
+		"19:	.word	0xe70f,0x1100,0x0c36\n"	/* vlm 16,31,256(1) */
+		"20:"
+		:
+		: [vxrs] "Q" (*(struct vx_array *) &state->vxrs),
+		  [m] "d" (state->mask)
+		: "1", "cc");
+
+update_fpu_state:
+	/* Update current kernel VX state */
+	__this_cpu_write(kernel_fpu_state, state->mask);
+}
+EXPORT_SYMBOL(__kernel_fpu_end);