Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "The timer and timekeeping departement delivers:

  Core:

   - The consolidation of the VDSO code into a generic library including
     the conversion of x86 and ARM64. Conversion of ARM and MIPS are en
     route through the relevant maintainer trees and should end up in
     5.4.

     This gets rid of the unnecessary different copies of the same code
     and brings all architectures on the same level of VDSO
     functionality.

   - Make the NTP user space interface more robust by restricting the
     TAI offset to prevent undefined behaviour. Includes a selftest.

   - Validate user input in the compat settimeofday() syscall to catch
     invalid values which would be turned into valid values by a
     multiplication overflow

   - Consolidate the time accessors

   - Small fixes, improvements and cleanups all over the place

  Drivers:

   - Support for the NXP system counter, TI davinci timer

   - Move the Microsoft HyperV clocksource/events code into the
     drivers/clocksource directory so it can be shared between x86 and
     ARM64.

   - Overhaul of the Tegra driver

   - Delay timer support for IXP4xx

   - Small fixes, improvements and cleanups as usual"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  time: Validate user input in compat_settimeofday()
  timer: Document TIMER_PINNED
  clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic
  clocksource/drivers: Make Hyper-V clocksource ISA agnostic
  MAINTAINERS: Fix Andy's surname and the directory entries of VDSO
  hrtimer: Use a bullet for the returns bullet list
  arm64: vdso: Fix compilation with clang older than 8
  arm64: compat: Fix __arch_get_hw_counter() implementation
  arm64: Fix __arch_get_hw_counter() implementation
  lib/vdso: Make delta calculation work correctly
  MAINTAINERS: Add entry for the generic VDSO library
  arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system
  arm64: vdso: Remove unnecessary asm-offsets.c definitions
  vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h
  clocksource/drivers/davinci: Add support for clocksource
  clocksource/drivers/davinci: Add support for clockevents
  clocksource/drivers/tegra: Set up maximum-ticks limit properly
  clocksource/drivers/tegra: Cycles can't be 0
  clocksource/drivers/tegra: Restore base address before cleanup
  clocksource/drivers/tegra: Add verbose definition for 1MHz constant
  ...

2 files changed, 9 insertions, 8 deletions

diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 132d149494d6..ab73a9a639ae 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -261,10 +261,10 @@ static int kvm_pmu_rdpmc_vmware(struct kvm_vcpu *vcpu, unsigned idx, u64 *data)
 		ctr_val = rdtsc();
 		break;
 	case VMWARE_BACKDOOR_PMC_REAL_TIME:
-		ctr_val = ktime_get_boot_ns();
+		ctr_val = ktime_get_boottime_ns();
 		break;
 	case VMWARE_BACKDOOR_PMC_APPARENT_TIME:
-		ctr_val = ktime_get_boot_ns() +
+		ctr_val = ktime_get_boottime_ns() +
 			vcpu->kvm->arch.kvmclock_offset;
 		break;
 	default:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fafd81d2c9ea..63bb1ee8258e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -67,6 +67,7 @@
 #include <asm/mshyperv.h>
 #include <asm/hypervisor.h>
 #include <asm/intel_pt.h>
+#include <clocksource/hyperv_timer.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
@@ -1728,7 +1729,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 
 	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
 	offset = kvm_compute_tsc_offset(vcpu, data);
-	ns = ktime_get_boot_ns();
+	ns = ktime_get_boottime_ns();
 	elapsed = ns - kvm->arch.last_tsc_nsec;
 
 	if (vcpu->arch.virtual_tsc_khz) {
@@ -2070,7 +2071,7 @@ u64 get_kvmclock_ns(struct kvm *kvm)
 	spin_lock(&ka->pvclock_gtod_sync_lock);
 	if (!ka->use_master_clock) {
 		spin_unlock(&ka->pvclock_gtod_sync_lock);
-		return ktime_get_boot_ns() + ka->kvmclock_offset;
+		return ktime_get_boottime_ns() + ka->kvmclock_offset;
 	}
 
 	hv_clock.tsc_timestamp = ka->master_cycle_now;
@@ -2086,7 +2087,7 @@ u64 get_kvmclock_ns(struct kvm *kvm)
 				   &hv_clock.tsc_to_system_mul);
 		ret = __pvclock_read_cycles(&hv_clock, rdtsc());
 	} else
-		ret = ktime_get_boot_ns() + ka->kvmclock_offset;
+		ret = ktime_get_boottime_ns() + ka->kvmclock_offset;
 
 	put_cpu();
 
@@ -2185,7 +2186,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	}
 	if (!use_master_clock) {
 		host_tsc = rdtsc();
-		kernel_ns = ktime_get_boot_ns();
+		kernel_ns = ktime_get_boottime_ns();
 	}
 
 	tsc_timestamp = kvm_read_l1_tsc(v, host_tsc);
@@ -9015,7 +9016,7 @@ int kvm_arch_hardware_enable(void)
 	 * before any KVM threads can be running.  Unfortunately, we can't
 	 * bring the TSCs fully up to date with real time, as we aren't yet far
 	 * enough into CPU bringup that we know how much real time has actually
-	 * elapsed; our helper function, ktime_get_boot_ns() will be using boot
+	 * elapsed; our helper function, ktime_get_boottime_ns() will be using boot
 	 * variables that haven't been updated yet.
 	 *
 	 * So we simply find the maximum observed TSC above, then record the
@@ -9243,7 +9244,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	mutex_init(&kvm->arch.apic_map_lock);
 	spin_lock_init(&kvm->arch.pvclock_gtod_sync_lock);
 
-	kvm->arch.kvmclock_offset = -ktime_get_boot_ns();
+	kvm->arch.kvmclock_offset = -ktime_get_boottime_ns();
 	pvclock_update_vm_gtod_copy(kvm);
 
 	kvm->arch.guest_can_read_msr_platform_info = true;